Bioinspired Bifunctional Membrane for Efficient Clean Water Generation

Janus structure hydrogels: recent advances in synthetic strategies, biomedical microstructure and (bio)applications

Janus structure hydrogels (JSHs) are novel materials. Their primary fabrication methods and various applications have been widely reported. JSHs are primarily composed of Janus particles (JNPs) and polysaccharide components. They exhibit two distinct physical or chemical properties, generating intriguing characteristics due to their asymmetric structure. Normally, one side (adhesive interface) is predominantly constituted of polysaccharide components, primarily serving excellent adhesion. On the other side (functional surface), they integrate diverse functionalities, concurrently performing a plethora of synergistic functions. In the biomedical field, JSHs are widely applied in anti-adhesion, drug delivery, wound healing, and other areas. It also exhibits functions in seawater desalination and motion sensing. Thus, JSHs hold broad prospects for applications, and they possess significant research value in nanotechnology, environmental science, healthcare, and other fields. Additionally, this article proposes the challenges and future work facing these fields.

Dealloying-Derived Self-Supporting Nanoporous Zinc Film with Optimized Macro/Microstructure for High-Performance Solar Steam Generation

Solar steam generation (SSG) is a promising technology for the production of freshwater that can help alleviate global water scarcity. Nanostructured metals, known for their localized surface plasmon resonance effect, have generated significant interest, but low-cost metal films with excellent water evaporation properties are challenging. In this work, we present a one-step dealloying route for fabricating self-supporting black nanoporous zinc (NP-Zn) films with a bicontinuous ligament/channel structure, using Al-Zn solid solution alloys as the precursors. The influence of alloy composition on the formation and macro/microstructure of NP-Zn was investigated, and an optimal Al98Zn2 was selected. Additionally, in situ and ex situ characterizations were conducted to unveil the dealloying mechanism of Al98Zn2 and phase/microstructure evolution of NP-Zn during dealloying, including the phase transition of Al(Zn) → Zn, significant volume shrinkage (89.8%), and the development of high porosity (81.3%). The nanoscale ligament/channel structure and high porosity endow the NP-Zn films with good broadband absorption and superior hydrophilicity and, more importantly, give them excellent SSG performance. The NP-Zn2 film displays high evaporation efficiency, superior stability, and good seawater desalination performance. The efficient SSG performance, material abundance, and low cost suggest that NP-Zn films have promising applications in metal-based photothermal materials for SSG.

Simulation and Analysis of Anodized Aluminum Oxide Membrane Degradation

Microelectromechanical systems (MEMS)-based filter with microchannels enables the removal of various microorganisms, including viruses and bacteria, from fluids. Membranes with porous channels can be used as filtration interfaces in MEMS hemofilters or mini-dialyzers. The main problems associated with the filtration process are optimization of membrane geometry and fouling. A nanoporous aluminum oxide membrane was fabricated using an optimized two-step anodization process. Computational strength modeling and analysis of the membrane with specified parameters were performed using the ANSYS structural module. A fuzzy simulation was performed for the numerical analysis of flux through the membrane. The membrane was then incorporated with the prototype for successive filtration. The fluid flux and permeation analysis of the filtration process have been studied. Scanning electron microscope (SEM) micrographs of membranes have been obtained before and after the filtration cycles. The SEM results indicate membrane fouling after multiple cycles, and thus the flux is affected. This type of fabricated membrane and setup are suitable for the separation and purification of various fluids. However, after several filtration cycles, the membrane was degraded. It requires a prolonged chemical cleaning. High-density water has been used for filtration purposes, so this MEMS-based filter can also be used as a mini-dialyzer and hemofilter in various applications for filtration. Such a demonstration also opens up a new strategy for maximizing filtration efficiency and reducing energy costs for the filtration process by using a layered membrane setup.

Solar-driven seawater desalination via plasmonic hybrid MOF/polymer and its antibacterial activity

In recent years, solar seawater desalination has been considered to be a promising and cost-effective technique to produce clean sources for water treatment and water deficiency. In addition, this technique shows high photothermal conversion efficiency by solar collectors to transfer solar energy into heat and the transformation of molecules in the capillaries of solar evaporators. In this study, we report the preparation of graphene-supported MIL-125 with polyurethane foam (MGPU) for solar steam generation. We modified MGPU by using the plasmonic nanoparticles of Ag and a polymer of polyaniline to increase the evaporation rate. Polyurethane foam can float on the surface of water and self-pump water by its hydrophilic porous structure, superior thermal insulation capabilities, and easy fabrication. MIL-125 has a high salt rejection and higher water permeability. It can reduce the affinity between water molecules and the pore surface of membrane, making it simple for water molecules to move through the pores. GO is a great alternative for steam generation applications since it exhibits broad-band light. The strong solar absorption, photothermal conversion efficiency, and photoreaction efficiency are enhanced by the use of silver nanoparticles in the photoreaction. The salt resistance capability is enhanced in saline water in the presence of polyaniline in a composite. Under one solar irradiation, the Ag/PANI/GO@MIL-125 (Ag-PMG) nanocomposite demonstrates an average 1.26 kg m² h^-1 rate of evaporation and an efficiency as high as 90%. The composite exhibits remarkable stability and durability after more than 10 cycles of use without a noticeable decrease in activity. In addition, the composite exhibits excellent organic dye removal from contaminated water and generates pure condensed freshwater. The antibacterial photoactivity of the photocatalysts was examined against B. subtilis and E. coli. The results demonstrate that Ag-PMG shows higher antibacterial activity than MIL-125 and PMG. It was shown that the presence of rGO, PANI, and Ag in the sample enhances the antimicrobial activity.

Biological and Bioinspired Thermal Energy Regulation and Utilization

The regulation and utilization of thermal energy is increasingly important in modern society due to the growing demand for heating and cooling in applications ranging from buildings, to cooling high power electronics, and from personal thermal management to the pursuit of renewable thermal energy technologies. Over billions of years of natural selection, biological organisms have evolved unique mechanisms and delicate structures for efficient and intelligent regulation and utilization of thermal energy. These structures also provide inspiration for developing advanced thermal engineering materials and systems with extraordinary performance. In this review, we summarize research progress in biological and bioinspired thermal energy materials and technologies, including thermal regulation through insulation, radiative cooling, evaporative cooling and camouflage, and conversion and utilization of thermal energy from solar thermal radiation and biological bodies for vapor/electricity generation, temperature/infrared sensing, and communication. Emphasis is placed on introducing bioinspired principles, identifying key bioinspired structures, revealing structure-property-function relationships, and discussing promising and implementable bioinspired strategies. We also present perspectives on current challenges and outlook for future research directions. We anticipate that this review will stimulate further in-depth research in biological and bioinspired thermal energy materials and technologies, and help accelerate the growth of this emerging field.

Compressible polyaniline-coated sodium alginate-cattail fiber foam for efficient and salt-resistant solar steam generation

Solar steam generation has attracted widespread attention because of its ability to produce clean water through desalination and wastewater treatment without conventional energy consumption. In this work, a polyaniline (PANI)-coated sodium alginate (SA)/cattail fiber (CF) foam for photothermal evaporator is prepared via directional freezing and oxidative polymerization. The SA/CF foam displays desirable water pumping capability because of the lamellar sandwich structure interconnected by porous networks. More importantly, the directional porous network architecture ameliorates the mechanical and salt-resistant performances of the SA/CF foam. The as-prepared PANI@SA/CF foam shows inferior heat conductivity of 0.047 W m^-1 K^-1 and outstanding light absorption over 96% in solar window. A vapor evaporation rate of 2.04 kg m^-2 h^-1 under 1 sun illumination is achieved for the PANI@SA/CF evaporator. Furthermore, the PANI@SA/CF foam could be employed in solar-driven freshwater generation from seawater and wastewater with high ion and dye removal rates. The combination of water evaporation and cleaning capabilities of the PANI@SA/CF foam as photothermal materials provide a framework for the exploration of next-generation evaporators in seawater desalination and wastewater treatment applications.

Photocorrosion-Based BiOCl Photothermal Materials for Synergistic Solar-Driven Desalination and Photoelectrochemistry Energy Storage and Release

Solar-driven interfacial evaporation is one of the most promising desalination technologies. However, few studies have effectively combined energy storage with evaporation processes. Here, a novel multifunctional interfacial evaporator, calcium alginate hydrogel/bismuth oxychloride/carbon black (HBiC), is designed, which integrates the characteristics of interfacial evaporation and direct photoelectric conversion. Under illumination, the Bi nanoparticles which were produced by photoetching of BiOCl and its reaction heat are simultaneously used for the heating of water molecules. Meanwhile, part of the solar energy is converted into chemical energy through the photocorrosion reaction and stored in HBiC. At night, Bi NPs undergo autooxidation reaction and an electric current is generated during this process (like a metal-air battery), in which the maximum current density is more than 15 μA cm^-2. This scientific design cleverly combines desalination with power generation and provides a new development direction for energy collection and storage.

Progress on TiO2-based materials for solar water interfacial evaporation

Solar water interfacial evaporation (SWIE) has attracted much attention for harvesting clean water. Over the last few decades, researchers have developed an innovative photo-thermal material for high-performance solar water interfacial evaporation. For higher evaporation performance, TiO2-based materials gain attention as a promising photo-thermal material due to their light absorption capacity. This study compared conceptual designs of TiO2-based materials for SWIE. Structural design and engineering strategies for improving evaporation rates and higher thermal conversion efficiency were reviewed. In addition, the material’s thermal stability and heat management were analyzed. This review provides an overview of the current advances in photo-thermal TiO2 materials to motivate research and translation efforts from the laboratory to large-scale solar water clean water production. Additional benefits of TiO2 materials on solar water interfacial evaporation should be investigated beyond containers to solve interconnected water, environmental, and energy progression.

Stimuli-Responsive Electrospun Fluorescent Fibers Augmented with Aggregation-Induced Emission (AIE) for Smart Applications

This review addresses the latest advancements in the integration of aggregation-induced emission (AIE) materials with polymer electrospinning, to accomplish fine-scale electrospun fibers with tunable photophysical and photochemical properties. Micro- and nanoscale fibers augmented with AIE dyes (termed AIEgens) are bespoke composite systems that can overcome the limitation posed by aggregation-caused quenching, a critical deficiency of conventional luminescent materials. This review comprises three parts. First, the reader is exposed to the basic concepts of AIE and the fundamental mechanisms underpinning the restriction of intermolecular motions. This is followed by an introduction to electrospinning techniques pertinent to AIE-based fibers, and the core parameters for controlling fiber architecture and resultant properties. Second, exemplars are drawn from latest research to demonstrate how electrospun nanofibers and porous films incorporating modified AIEgens (especially tetraphenylethylene and triphenylamine derivatives) can yield enhanced photostability, photothermal properties, photoefficiency (quantum yield), and improved device sensitivity. Advanced applications are drawn from several promising sectors, encompassing optoelectronics, drug delivery and biology, chemosensors and mechanochromic sensors, and innovative photothermal devices, among others. Finally, the outstanding challenges together with potential opportunities in the nascent field of electrospun AIE-active fibers are presented, for stimulating frontier research and explorations in this exciting field.

From Materials to Devices: Rationally Designing Solar Steam System for Advanced Applications

Solar-driven water vaporization for freshwater production attracts significant interest due to its potential for solving global water scarcity problems. In this review, the recent development of management strategies via diverse rational designs in terms of light, thermal, water, and anti-salt fouling for enhancement of overall vaporization efficiency, is summarized. For device design, a host-guest concept is raised for clearly elaborating the detailed function and interaction between the solar-thermal material and the substrates. In addition, the rising technologies derived from solar vaporization, such as energy generation, photocatalysis, dehumidification, salt harvesting, sterilization, and biofuel production, are also highlighted. This review provides a new horizon toward the development of solar technologies and practical applications.

A Composite Fabric with Dual Functions for High-Performance Water Purification

The dilemma of diminishing freshwater resources caused by water pollution has always impacted human life. Solar-driven interfacial evaporation technology has the potential for freshwater production via solar-driven distillation. However, in solar-driven interfacial evaporation technology, it is difficult to overcome the problem of wastewater containing various contaminants. In this work, we propose a bifunctional fabric created by depositing titanium dioxide@carbon black nanoparticles onto cotton fabric (TiO₂@CB/CF). The TiO₂@CB/CF has a coupling effect that includes the photothermal effect of CB and photocatalysis of TiO₂, and it can not only generate clean water but can also purify contaminated water. The resulting bifunctional fabric can achieve an outstanding water evaporation rate of 1.42 kg m^-2 h^-1 and a conversion efficiency of 90.4% in methylene blue (MB) solution under one-sun irradiation. Simultaneously, the TiO₂@CB/CF demonstrates a high photocatalytic degradation of 57% for MB solution after 2 h with light irradiation. It still shows a good photocatalysis effect, even when reused in an MB solution for eight cycles. Furthermore, the TiO₂@CB/CF delivers excellent performance for actual industrial textile dyeing wastewater. This bifunctional fabric has a good application prospect and will provide a novel way to resolve the issue of freshwater scarcity.

Rational Design of Photothermal and Anti-Bacterial Foam With Macroporous Structure for Efficient Desalination of Water

With the environmental deterioration and the rise in demand for sustainability, the lack of freshwater resources has emerged as a global concern. To address this issue, the desalination of water using solar evaporation is centered on as a promising approach. In this study, we designed a light and photothermal liquefied-chitin-based polyurethane foam to achieve efficient water evaporation benefiting from their powerful solar spectral absorption, low thermal conductivity, quick transportation of water, hierarchically porous structures, and anti-biofouling natures. Moreover, because of the introduction of nano-silver, the newly developed foam exhibits considerable antibacterial ability and improved photothermal performance. Notably, the low thermal conductivity of the foam can reduce the loss of absorbed solar heat, whereas its large porous structure provides a smooth water transport channel. More importantly, with the assistance of heat, polyacrylamide hydrogels adhering along with the pores rapidly absorb and desorb water molecules, promoting the evaporation of water and improving solar energy conversion efficiency. Ultimately, under irradiation by one sunlight, the proposed material demonstrated a water evaporation rate and solar photothermal conversion efficiency of 2.44 kg m⁻² h⁻¹ and 153.2%, respectively.

Luminescence Reduced Graphene Oxide Based Photothermal Purification of Seawater for Drinkable Purpose

Getting drinking water from seawater is a hope and long-term goal that has long been explored. Here, we report graphene-loaded nonwoven fabric membranes for seawater purification based on photothermal heating. The photothermal membrane of non-woven fabric loaded with graphene oxide has high light absorption and strong heating effect, and its evaporation rate about 5 times higher than that of non-woven fabric. Under the condition of light intensity of 1 kW m⁻², the evaporation rate can reach 1.33 kg m⁻² h⁻¹. The results of cell activity test showed that the concentration of bacteria after photothermal membrane treatment decreased significantly. The photothermal membrane can be used for many times without greatly reducing the evaporation efficiency, which means that it is suitable for regional water purification and seawater desalination.

Inhibition of typical phenolic compounds entering into condensed freshwater by surfactants during solar-driven seawater distillation

Recently, solar-driven seawater desalination based on air-water interfacial heating has triggered significant research interest due to its high water evaporation rate, high photothermal conversion efficiency, low energy consumption, simple operation and low cost. However, as the air-water interface temperature reaches as high as 40-70 °C, volatile organic compounds (VOCs) will volatilize into the condensed desalinated water and results in the polluted freshwater. In this work, anionic, cationic, and nonionic surfactants were applied for the first time to inhibit the phenolic compounds such as phenol, p-methylphenol and p-chlorophenol entering into the condensed freshwater. Results showed that the concentration of phenol could be reduced by the addition of cetyl trimethyl ammonium bromide (CTAB). The phenol's distillation concentration ratio (R_D) reduced from 76% to 35% due to the electrostatic interaction and the micellar encapsulation between the CTAB and phenol. Moreover, parameters including CTAB dose, initial phenol concentration, solar intensity, pH, and salinity that affecting the R_D were also investigated. Finally, a real seawater solar-driven distillation experiment also revealed that the water quality of freshwater was improved by the addition of CTAB. This work revealed that the surfactants such as CTAB can be potentially used to inhibit VOCs entering into the condensed freshwater during solar-driven seawater distillation.

Multifunctional cotton with PANI-Ag NPs heterojunction for solar-driven water evaporation

Water evaporation using photothermal materials is a cost-effective and sustainable technology for alleviating the world's freshwater crisis, but oil contaminants and organic pollutants exist in the original water sources, which severely degrade the evaporation performance and pose environmental hazards. In this paper, we demonstrate a photothermal material (multifunctional cotton) that simultaneously demonstrates oil-resistance, organic pollutant removal, and a high water evaporation rate. A Schottky heterostructure was formed between polyaniline (PANI) and Ag NPs, which improved the photothermal conversion and achieved a water evaporation rate of 1.37 kg m^-2 h^-1 and photothermal conversion efficiency of 84.7% under one-sun illumination (1 kW m^-2). Notably, various organic pollutants in the water source were thoroughly removed by visible-light catalytic degradation and adsorption, which displayed efficiencies of 99.3% and 97%, respectively. The multifunctional cotton also possessed excellent superoleophobicity, and repelled oil contaminants and organic pollutants in water. Considering these merits, the as-prepared multifunctional cotton is an outstanding candidate for water evaporation from various sources.

Coupling solar-driven photothermal effect into photocatalysis for sustainable water treatment

Effectively harnessing renewable and inexhaustible solar radiation for energy conversion has attracted significant research interest in the past decade. Solar thermal conversion, as a ubiquitous phenomenon, can be implemented to evaporate water and concurrently boost photocatalytic performance for addressing freshwater scarcity and energy crisis. Most recently, solar water evaporation accompanied by photocatalytic degradation, sterilization, and hydrogen production has been proposed as a promising avenue to endow new vitality into the field of clean water and energy production. Driven by the advances of rationally designed solar-powered functional materials, a large variety of photothermal-coupled photocatalysis technologies have been exploited. In this context, it is imperative to summarize the recent progress and discuss the challenges in this multidisciplinary field. Herein, we overview photothermal materials based on various fundamental principles and highlight emerging applications in the areas of solar water evaporation, water purification, and solar-driven energy production. Furthermore, the challenges and perspectives toward both fundamental research and practical applications are also proposed. It is envisioned that this review can provide insightful suggestions to further advance the development of integrated solar thermal driven water evaporation and photocatalytic systems to fulfill concurrent energy conversion and environmental applications.

g-C3N4/MoS2 based floating solar still for clean water production by thermal/light activation of persulfate

Currently, seawater desalination based on air-water interface solar heating has triggered significant research interests because it effectively makes use of the solar energy and avoids fossil fuel consumption. However, to prevent the volatile organic compounds (VOCs) from volatilizing with water vapor which later will liquefy and enter the condensed freshwater is still a challenge. In this work, a g-C₃N₄/MoS₂ based floating solar still (CM-FSS) combined with thermal/light activation of persulfate (PS) at air-water interface was applied for clean freshwater production for the first time. The CM-FSS was composed of a g-C₃N₄/MoS₂ top layer for solar absorption, simultaneous thermal/light activation of PS and then VOCs degradation at air-water interface, a floating layer of expandable polyethylene (EPE) foam for heat isolation, and a transport channel of air-laid paper (ALP) for seawater and PS solution delivery. The water evaporation rate of the CM-FSS was measured at 1.23 kg m^-2 h^-1 under 1 kW m^-2, which is 4.09 times higher than that of pure water without an evaporator. With the assistance of g-C₃N₄/MoS₂ photocatalytic degradation and thermal/light activation of PS at the air-water interface, a high removal efficiency of a selected model VOCs pollutant of nitrobenzene (NB) could reach to 98.2% in condensed freshwater. Finally, when real seawater samples were employed as source water for solar distillation, the typical water-quality indices such as salinity, turbidity, anions, cations and organics of the condensed freshwater were below the limit values of the Standards for Drinking Water Quality in WHO, US EPA and China.

Solar-Powered Sustainable Water Production: State-of-the-Art Technologies for Sunlight-Energy-Water Nexus

Alternative water resources (seawater, brackish water, atmospheric water, sewage, etc.) can be converted into clean freshwater via high-efficiency, energy-saving, and cost-effective methods to cope with the global water crisis. Herein, we provide a comprehensive and systematic overview of various solar-powered technologies for alternative water utilization (i.e., "sunlight-energy-water nexus"), including solar-thermal interface desalination (STID), solar-thermal membrane desalination (STMD), solar-driven electrochemical desalination (SED), and solar-thermal atmospheric water harvesting (ST-AWH). Three strategies have been proposed for improving the evaporation rate of STID systems above the theoretical limit and designing all-weather or all-day operating STID systems by analyzing the energy transfer of the evaporation and condensation processes caused by solar-thermal conversion. This review also introduces the fundamental principles and current research hotspots of two other solar-driven seawater or brackish water desalination technologies (STMD and SED) in detail. In addition, we also cover ST-AWH and other solar-powered technologies in terms of technology design, materials evolution, device assembly, etc. Finally, we summarize the content of this comprehensive review and discuss the challenges and future outlook of different types of solar-powered alternative water utilization technologies.

Multi-Synergistic Removal of Low-Boiling-Point Contaminants with Efficient Carbon Aerogel-Based Solar Purifier

Solar steam generation is considered as an efficient way for addressing water shortage issues via seawater desalination and wastewater purification. In a solar evaporator, an absorber would convert optical energy to heat for evaporating nearby water. In this process, many low-boiling-point contaminants can also be evaporated along with water steam, which compromises the effectiveness of purification. There is, so far, no study on the removal of such low-boiling-point contaminants such as organic pesticides in wastewater. To address this problem, we demonstrate a versatile carbon hybrid aerogel (CHA) as a solar powered water purification platform. With an elaborate absorber design, the maximum solar evaporation rate of 2.1 kg m^-2 h^-1 is achieved under 1 sun illumination. More importantly, CHA can effectively suppress the evaporation of low-boiling-point contaminants including common pesticides and mercury ion via its strong adsorption and retention effect. Synergetic steaming and the adsorption of CHA will inspire more paradigms of solar steam generation technologies for applications relevant to detoxification and water remediation.

Interfacial solar vapor generation for desalination and brine treatment: Evaluating current strategies of solving scaling

Interfacial solar vapor generation, an efficient, sustainable, and low-cost method for producing clean water, has attracted great interest for application in solar desalination and wastewater treatment. Although recent studies indicated significant enhancement of overall performance by developing photothermal materials and constructing different dimensional systems, stable evaporation performance and long-term operation of the evaporator are hindered by severe scaling issues. In this critical review, we present the latest strategies in reducing salt accumulation on the evaporator for solar desalination and brine treatment. We first demonstrate the consequences of salt accumulation, and then discuss various self-cleaning methods based on bio-inspired concepts and other strategies such as physical cleaning, ion rejection and exchange, fast ion diffusion, and controlled crystallization, etc. Importantly, we discuss and address the rational design of the evaporator via establishing a relationship model between its porosity, thickness, and thermal conductivity. Lastly, we evaluate salt-resistance strategies, evaporation performance, and possibilities of real application in different evaporation systems with scaling-resistant abilities.

Distributed solar desalination by membrane distillation: current status and future perspectives

Membrane distillation (MD) has been proven promising in solar-driven desalination. Moreover, its unique characteristics such as simple process, module compactness, high salt rejection rate, etc. allow for a small-scale device in a distributed system. Both theoretical and experimental researches on the coupling between solar collectors and MD aiming at compact and autonomous desalination system have been devoted to enhance freshwater productivity and energy efficiency. In this paper, certain critical gaps are summarized upon a panoramic review of the current status, including limited production and energy performance compared with commercial-scale desalination, unclear relation between solar collecting area and membrane area, and few discussions on efficient condensation, etc. To tackle these challenges, perspectives on the essential future research directions are proposed. Solar direct heating and solar concentration constitute the possible resolution to enhance solar energy utilization for higher water production, which also raise the question of optimizing solar/MD areas. Meanwhile, module stacking, module internal heat recovery and external evaporation heat recovery are deemed prospective in further reducing MD energy consumption. Subsequently, an enhanced vapor condensation needs more exploration. Those aspects and a potential combination among them are the main tasks in the near future, together with more field tests on small distributed solar-driven MD systems.

Separation, anti-fouling, and chlorine resistance of the polyamide reverse osmosis membrane: From mechanisms to mitigation strategies

Membrane technology has been widely used in the wastewater treatment and seawater desalination. In recent years, the reverse osmosis (RO) membrane represented by polyamide (PA) has made great progress because of its excellent properties. However, the conventional PA RO membranes still have some scientific problems, such as membrane fouling, easy degradation after chlorination, and unclear mechanisms of salt retention and water flux, which seriously impede the widespread use of RO membrane technology. This paper reviews the progress in the research and development of the RO membrane, with key focus on the mechanisms and strategies of the contemporary separation, anti-fouling and chlorine resistance of the PA RO membrane. This review seeks to provide state-of-the-art insights into the mitigation strategies and basic mechanisms for some of the key challenges. Under the guidance of the fundamental understanding of each mechanism, operation and modification strategies are discussed, and reasonable analysis is carried out, which can address some key technical challenges. The last section of the review focuses on the technical issues, challenges, and future perspective of these mechanisms and strategies. Advances in synergistic mechanisms and strategies of the PA RO membranes have been rarely reviewed; thus, this review can serve as a guide for new entrants to the field of membrane water treatment and established researchers.

Efficient Removal of Dye from Wastewater without Selectivity Using Activated Carbon-Juncus effusus Porous Fibril Composites

Adsorption techniques have been successfully applied in water purification because of their flexibility, simplicity of design, and effectiveness. Activated carbon is an effective absorbent using for dye adsorption; however, the powder structure is not conducive for practical applications and cannot be used to filter dye solutions which are challenges that still need to be addressed. Herein, a natural cellulose-based absorbent, activated carbon-Juncus effusus fiber (AC-JE fiber), demonstrates the removal of all kinds of dyes without selectivity and humic substances and humic-like organics from wastewater. The combined macroporous structures of JE fibers and the microporous and mesoporous structures of activated carbon particles enhance their adsorption properties. These composite absorbents have excellent adsorption and continuous filtration effect. The rejection rate is approximately 100% not only on acidic and anionic dyes but also on basic and cationic dyes. Moreover, the dye solution adsorbed by AC-JE fibers exhibits an ideal freshwater quality (almost no bacteria), similar to that of the deionized water. The AC-JE fibers prove their potential for dye removal, in both adsorption and filtration. Their sterilization ability substantiates their potential in the field of water purification as they can be used as ideal absorbents based on cellulose for removing dyes and purifying wastewater.

Construction of a Three-Dimensional Interpenetrating Network Sponge for High-Efficiency and Cavity-Enhanced Solar-Driven Wastewater Treatment

It is well known that the photothermal conversion performance of solar-driven interfacial water evaporation systems is known to have a stronger photothermal conversion performance than suspended water evaporation systems due to their relatively strong ability to suppress overall heat loss. Natural polymer chitosan and gelatin can form a three-dimensional interpenetrating network (IPN) sponge to provide an interface for water evaporation due to strong hydrogen bonding and electrostatic attraction interaction. However, the lack of effective light absorption, the intrinsic short lifetime, and the poor photothermal conversion greatly compromise their steam generation performance. Here, we fabricated a chitosan/gelatin-based IPN sponge incorporated with melanin-coated titania hollow nanospheres (CG@MPT-h) as a solar thermal converter, which is designed to exhibit a unique cavity structure and vertical channels. The cavity structure of melanin-coated titania acts as a solar thermal transducer, while the chitosan/gelatin-based IPN sponge acts as a single-pass water pump. A water hyacinth-inspired evaporation system shows outstanding steam generation performance, and the highest steam generation rate was 3.17 kg m^-2 h^-1 under a 2.5 sun illumination because of the cavity enhancement effect, far above TiO₂ particles and reported photo-thermal conversion materials. More importantly, the embedding of MPT-h nanoparticles in the IPN sponge effectively inhibits the growth of bacteria in the vertical channels, resulting in an antibacterial solar-driven water evaporator. This advanced sponge provides a cost-effective and practical sustainable energy technique for solar-driven wastewater treatment.

Transport Phenomena in Nano/Molecular Confinements

The transport of fluid and ions in nano/molecular confinements is the governing physics of a myriad of embodiments in nature and technology including human physiology, plants, energy modules, water collection and treatment systems, chemical processes, materials synthesis, and medicine. At nano/molecular scales, the confinement dimension approaches the molecular size and the transport characteristics deviates significantly from that at macro/micro scales. A thorough understanding of physics of transport at these scales and associated fluid properties is undoubtedly critical for future technologies. This compressive review provides an elaborate picture on the promising future applications of nano/molecular transport, highlights experimental and simulation metrologies to probe and comprehend this transport phenomenon, discusses the physics of fluid transport, tunable flow by orders of magnitude, and gating mechanisms at these scales, and lists the advancement in the fabrication methodologies to turn these transport concepts into reality. Properties such as chain-like liquid transport, confined gas transport, surface charge-driven ion transport, physical/chemical ion gates, and ion diodes will provide avenues to devise technologies with enhanced performance inaccessible through macro/micro systems. This review aims to provide a consolidated body of knowledge to accelerate innovation and breakthrough in the above fields.

Self-Suspended Photothermal Microreactor for Water Desalination and Integrated Volatile Organic Compound Removal

Steam generation and photocatalytic degradation of organic pollutants based on solar light are regarded as two important strategies for addressing the water scarcity issues. The water evaporation efficiency was greatly inhibited by the high cost, low stability, and low efficiencies of solar light absorption and photothermal conversion of photothermal materials. Moreover, volatile organic compounds (VOCs) are easily volatilized and enriched in as-distilled water during the photothermal process. Inspired by the structure of biomass materials in nature, a bifunctional solar light-driven steam generation and VOC removal microreactor was explored by coating commercial TiO₂ (P25) powders on a carbonized biomass waste Flammulina. With the 3D aligned porous carbon architectures, this microreactor exhibited both a high water evaporation rate (37.0 kg m^-2 h^-1) and a high energy conversion efficiency (91.2%) under simulated sunlight irradiation (light intensity = 25.5 kW m^-2). A high VOC removal rate (80.9% in 40 min) was also achieved during the steam generation process via choosing phenol as the probe pollutant molecules. The nature-inspired designing concept and bifunctional microreactor in this study may open up a new strategy for producing clean distilled water from seawater with an efficient removal of VOCs.

A Flexible Polymer Nanofiber-Gold Nanoparticle Composite Film for Solar-Thermal Seawater Desalination

Interfacial solar-thermal conversion has broad application prospects in solar driven steam generation, seawater desalination, sewage purification, and other fields. For a wide range of applications, high-efficiency interfacial solar-thermal conversion materials with the feature of being lightweight, flexible, and easy to scale up at the same time are significantly valued. Herein, a strategy for the preparation of solar-thermal poly (4-vinylpyridine) (P4VP) nanofiber-gold nanoparticle (Au NP) composite film (PGCF) is reported. Combining with the flexible and lightweight P4VP nanofibers, these absorbed Au NPs enable better solar-thermal conversion efficiency. Accordingly, the PGCF provides high-performance interfacial solar-driven steam generation, with 77% solar-heat conversion efficiency under the power density of 3.4 kW m^-2 , which shows stable output (3.4 kg m^-2 h^-1 ) in the application of solar-driven seawater desalination. In addition, PGCF is light in weight, flexible, and suitable for scalable commercial production, enabling PGCF broad application prospects in the field of light-to-heat conversion.

Evaluating surface water quality using water quality index in Beiyun River, China

The Beijing-Tianjin-Hebei urban agglomeration is one of the most water-scarce regions in China, because of the frequent human activities. Water scarcity and pollution have weakened the service functions of water ecosystems and hindered the regional economic development. As the "lifeline" of the economic development of Beijing-Tianjin-Hebei region, the water quality of Beiyun River has been widely concerned. River water quality assessment is one of the most important aspects to enhance water resources management plans. Water quality index (WQI), as one of the most frequently used evaluation tools, was used to comprehensively analyze the water quality in the Beiyun River. Between January 2017 and October 2018, we collected samples from 16 typical sampling sites along the main rivers of the watershed, covering four seasons. Seventeen water quality parameters, including temperature, pH, conductivity, dissolved oxygen (DO), chemical oxygen demand (COD), biochemical oxygen demand (BOD₅), ammonia nitrogen (NH₃-N), total phosphorus (TP), oil, volatile phenol (VP), fluoride, sulfide, surfactant, lead (Pb), copper (Cu), zinc (Zn), and arsenic (As), were used to calculate WQI. The average WQI values of Beiyun River in winter, spring, summer, and autumn were 88.15, 71.70, 78.92, and 90.12, respectively, explaining the water quality was "good" generally. There were significant differences in the spatial distribution of WQI values from Beiyun River, and water quality of upstream and downstream was better than that of midstream. In addition, correlation analysis was applied to explore the correlation between land use types and water quality. Water quality was significant negatively correlated with agriculture land and rural residential land, and a positive relationship between urban land and water quality. Generally, we believe that people's related activities on different land use are major elements impacting the water quality. Water environment improvement ought to increase the wastewater collection rate and sewage treatment capacity in rural areas, especially in the midstream of the Beiyun River. Graphical abstract.

Doping AIE Photothermal Molecule into All-Fiber Aerogel with Self-Pumping Water Function for Efficiency Solar Steam Generation

Utilizing solar energy to generate clean water by interface solar steam generation is considered to be a promising strategy to address the challenge of global water shortage. However, it is challenge to design an idealized structure with all of the required characters such as high photothermal conversion efficiency, large surface to volume, and porous and continuous water pumping. Herein, we demonstrate a three-dimensional all-fiber aerogel (3D AFA) that can float on the water surface and continuously self-pump water. More notably, an aggregation-induced emission (AIE) photothermal molecule is doped into the 3D AFA, which is endowed with the superior capacity of transferring solar energy into heat. Combining these distinctive benefits, the presented 3D AFA exhibits a high evaporation rate (1.43 kg m^-2 h^-1) and solar-to-vapor conversion efficiency (86.5%) under irradiation of 1 sun, as well as a high evaporation rate (10.9 kg m^-2 d^-1) under natural sunlight. Besides, the designed 3D AFA possesses sustainable stability and a self-cleaning function to restrain salt deposition, and there is no significant change in the evaporation performance after many cycles in the case of seawater treatment. With a highly efficient evaporation rate and long-term sustainable solar steam generation, such 3D AFA can offer a new strategy for desalination.

Graphene and Rice-Straw-Fiber-Based 3D Photothermal Aerogels for Highly Efficient Solar Evaporation

Solar-steam generation is one of the most promising technologies to mitigate the issue of clean water shortage using sustainable solar energy. Photothermal aerogels, especially the three-dimensional (3D) graphene-based aerogels, have shown unique merits for solar-steam generation, such as lightweight, high flexibility, and superior evaporation rate and energy efficiency. However, 3D aerogels require much more raw materials of graphene, which limits their large-scale applications. In this study, 3D photothermal aerogels composed of reduced graphene oxide (RGO) nanosheets, rice-straw-derived cellulose fibers, and sodium alginate (SA) are prepared for solar-steam generation. The use of rice straw fibers as skeletal support significantly reduces the need for the more expensive RGO by 43.5%, turning the rice straw biomass waste into value-added materials. The integration of rice straw fibers and RGO significantly enhances the flexibility and mechanical stability of the obtained photothermal RGO-SA-cellulose aerogel. The photothermal aerogel shows a strong broad-band light absorption of 96-97%. During solar-steam generation, the 3D photothermal aerogel effectively decreases the radiation and convection energy loss while enhancing energy harvesting from the environment, leading to an extremely high evaporation rate of 2.25 kg m^-2 h^-1, corresponding to an energy conversion efficiency of 88.9% under 1.0 sun irradiation. The salinity of clean water collected during the evaporation of real seawater is only 0.37 ppm. The materials are environmentally friendly and cost-effective, showing great potential for real-world desalination applications.

Solar-Driven Freshwater Generation from Seawater and Atmospheric Moisture Enabled by a Hydrophilic Photothermal Foam

The accelerated increase in freshwater demand, particularly among populations displaced in remote locations where conventional water sources and the infrastructure required to produce potable water may be completely absent, highlights the urgent need in creating additional freshwater supply from untapped alternative sources via energy-efficient solutions. Herein, we present a hydrophilic and self-floating photothermal foam that can generate potable water from seawater and atmospheric moisture via solar-driven evaporation at its interface. Specifically, the foam shows an excellent solar-evaporation rate of 1.89 kg m-2 h-1 with a solar-to-vapor conversion efficiency of 92.7% under 1-Sun illumination. The collected water is shown to be suitable for potable use because when synthetic seawater samples (3.5 wt %) are used, the foam is able to cause at least 99.99% of salinity reduction. The foam can also be repeatedly used in multiple hydration-dehydration cycles, consisting of moisture absorption or water collection, followed by solar-driven evaporation; in each cycle, 1 g of the foam can harvest 250-1770 mg of water. To the best of our knowledge, this is the first report of a material that integrates all the desirable properties for solar evaporation, water collection, and atmospheric-water harvesting. The lightweight and versatility of the foam suggest that the developed foams can be a potent solution for water efficiency, especially for off-grid situations.

Multifunctional Ag3PO4-rGO-Coated Textiles for Clean Water Production by Solar-Driven Evaporation, Photocatalysis, and Disinfection

Solar-driven water evaporation is of great importance for freshwater production via solar distillation and has attracted growing attention recently by the development of heat localization strategies. Yet, when polluted water is used as the source water, solar-driven water evaporation might further deteriorate the pollution. In this study, we report the facile preparation of multifunctional Ag₃PO₄-reduced graphene oxide (Ag₃PO₄-rGO) nanocomposite-coated textiles for clean water production by solar-driven water evaporation, photocatalysis, and disinfection. The multifunctional textiles are obtained through coating Ag₃PO₄-rGO nanocomposites onto cotton textile substrates. The resulting textile can float on the water surface, absorb solar light, and convert it into heat, enhancing the water surface temperature and promoting water evaporation. We show that with Ag₃PO₄-rGO nanocomposite-coated textiles on the water surface, a high water evaporation rate of 1.31 kg/(m² h) can be reached under solar light irradiation. Furthermore, the textiles can simultaneously decompose organic dyes and disinfect pathogenic microbes in water, purifying the raw water during solar-driven water evaporation. Such an all-in-one multifunctional textile provides a facile yet sustainable strategy for freshwater production.

3D Graphene-Based Macrostructures for Water Treatment

Recently, 3D graphene-based macrostructures (3D GBMs) have gained increased attention due to their immense application potential in water treatment. The unique structural features (e.g., large surface area and physically interconnected porous network) as well as fascinating properties (e.g., high electrical conductivity, excellent chemical/thermal stability, ultralightness, and high solar-to-thermal conversion efficiency) render 3D GBMs as promising materials for water purification through adsorption, capacitive deionization, and solar distillation. Moreover, 3D GBMs can serve as scaffolds to immobilize powder nanomaterials to build monolithic adsorbents and photo-/electrocatalysts, which significantly broadens their potential applications in water treatment. Here, recent advances in their synthesis and application toward water purification are highlighted. Remaining challenges and future perspectives are elaborated to highlight future research directions.

Photothermal materials for efficient solar powered steam generation

Solar powered steam generation is an emerging area in the field of energy harvest and sustainable technologies. The nano-structured photothermal materials are able to harvest energy from the full solar spectrum and convert it to heat with high efficiency. Moreover, the materials and structures for heat management as well as the mass transportation are also brought to the forefront. Several groups have reported their materials and structures as solutions for high performance devices, a few creatively coupled other physical fields with solar energy to achieve even better results. This paper provides a systematic review on the recent developments in photothermal nanomaterial discovery, material selection, structural design and mass/heat management, as well as their applications in seawater desalination and fresh water production from waste water with free solar energy. It also discusses current technical challenges and likely future developments. This article will help to stimulate novel ideas and new designs for the photothermal materials, towards efficient, low cost practical solar-driven clean water production.

Recyclable Polydopamine-Functionalized Sponge for High-Efficiency Clean Water Generation with Dual-Purpose Solar Evaporation and Contaminant Adsorption

Solar desalination of seawater is an attractive and environmentally friendly method to solve the long-standing water crisis. However, its efficiency is highly reliant on solar intensity. Additionally, increasing contamination in water makes it difficult to generate clean water through the solo desalination process. To address this, we propose a polydopamine (PDA)-functionalized hybrid material with dual-purpose solar evaporation and contaminant adsorption for highly efficient clean water production in all-weather conditions. The hybrid material is fabricated by polymerization of dopamine onto a commercial sponge in a facile, low-cost, and scalable manner. With excellent light absorption and chelation capabilities, the PDA film coated on sponge acts as both a photothermal material and adsorbent that allow us to achieve clean water production with solar desalination when sunshine and with contaminant adsorption when cloudy or at night. Meanwhile, the solar evaporation and contaminant adsorption of the PDA-sponge are synergized with one another, resulting in the PDA-sponge that is a desirable material with the capability of continuous clean water production in all-weather conditions. The PDA-sponge is also highly recyclable with a high retention rate of evaporation and adsorption efficiency even after 10 cycles. The promising PDA-based hybrid is believed to inspire new strategies for superior water treatment materials.

Portable Low-Pressure Solar Steaming-Collection Unisystem with Polypyrrole Origamis

Solar steaming has emerged as a promising green technology that can address the global issue of scarcity of clean water. However, developing high-performance, cost-effective, and manufacturable solar-steaming materials, and portable solar steaming-collection systems for individuals remains a great challenge. Here, a one-step, low-cost, and mass-producible synthesis of polypyrrole (PPy) origami-based photothermal materials, and an original portable low-pressure controlled solar steaming-collection unisystem, offering synergetic high rates in both water evaporation and steam collection, are reported. Due to enhanced areas for vapor dissipation, the PPy origami improves the water evaporation rate by at least 71% to 2.12 kg m^-2 h^-1 from that of a planar structure and exhibits a solar-thermal energy conversion efficiency of 91.5% under 1 Sun. When further controlling the pressure to ≈0.17 atm in the steaming-collection unisystem, the water collection rate improves by up to 52% systematically and dramatically. Although partial energy is utilized toward obtaining low-pressure, evaluations show that the overall energy efficiency is improved remarkably in the low-pressure system compared to that in ambient pressure. Furthermore, the device demonstrates effective decontamination of heavy metals, bacteria, and desalination. This work can inspire new paradigms toward developing high-performance solar steaming technologies for individuals and households.

High-Efficiency Superheated Steam Generation for Portable Sterilization under Ambient Pressure and Low Solar Flux

Superheated solar steam generation above 100 °C is critical for many important applications such as sterilization but is challenging to achieve under natural fluctuating low-flux solar illumination and often requires pressurization and the usage of expensive optical concentrators. Herein, we demonstrate generation of superheated steam under ambient pressure and low-flux solar illumination by integrating a recently emerged interfacial evaporation design into a solar vacuum tube. Within the tube, the water vapor, which is generated by a high-efficiency localized heating-based evaporator, is further heated by a heat exchanger into superheated steam without pressurization. The steam generator has shown tunable steam temperature from 102 to 165 °C and solar-to-steam conversion efficiency from 26 to 49% under 1 sun illumination. Owing to the minimized heat loss from the solar vacuum tube and the interfacial evaporation design, it enables stable generation of steam above 121 °C under ambient fluctuating solar illumination with an averaged solar flux of ∼600 W/m². Effective sterilization is verified using both the Geobacillus stearothermophilus biological indicator and Escherichia coli bacteria, making portable solar steam sterilization and other steam-related applications feasible under ambient solar illumination.

Progress in the Utilization Efficiency Improvement of Hot Carriers in Plasmon-Mediated Heterostructure Photocatalysis

The effect of plasmon-induced hot carriers (HCs) enables the possibility of applying semiconductors with wide band gaps to visible light catalysis, which becomes an emerging research field in environmental protections. Continued efforts have been made for an efficient heterostructure photocatalytic process with controllable behaviors of HCs. Recently, it has been discovered that the improvement of the utilization of HCs by band engineering is a promising strategy for an enhanced catalytic process, and relevant works have emerged for such a purpose. In this review, we give an overview of the recent progress relating to optimized methods for designing efficient photocatalysts by considering the intrinsic essence of HCs. First, the basic mechanism of the heterostructure photocatalytic process is discussed, including the formation of the Schokkty barrier and the process of photocatalysis. Then, the latest studies for improving the utilization efficiency of HCs in two aspects, the generation and extraction of HCs, are introduced. Based on this, the applications of such heterostructure photocatalysts, such as water/air treatments and organic transformations, are briefly illustrated. Finally, we conclude by discussing the remaining bottlenecks and future directions in this field.

Photothermal Membrane Water Treatment for Two Worlds

In meeting the increasing need for clean water in both developing and developed countries and in rural and urban communities, photothermal membrane water treatment technologies provide outstanding advantages: For developing countries and rural communities, by utilizing sunlight, photothermal membrane water treatment provides inexpensive, convenient, modular, decentralized, and accessible ways to clean water, which can reduce the consumption of conventional energy (e.g., electricity, natural gas) and the cost of clean water production. In developed countries and urban communities, photothermal membrane water treatment can improve the energy efficiency during water purification. In these water purification processes, the light absorption and light-to-heat conversion of photothermal materials are important factors in determining the membrane efficacy. Nanomaterials with well-controlled structure and optical properties can increase the light absorption and photothermal conversion of newly developed membranes. This Account introduces our recent work on developing scalable, cost-effective, and highly efficient photothermal membranes for four water purification applications: reverse osmosis (RO), ultrafiltration (UF), solar steam generation (SSG), and photothermal membrane distillation (PMD). By utilizing photothermal materials, first, we have demonstrated how sunlight can be used to improve the membrane's resistance to biofouling in RO and UF processes by photothermally induced inactivation of microorganisms. Second, we have developed novel SSG membranes (i.e., interfacial evaporators) that can harvest solar energy, convert it to localized heat, and generate clean water by evaporation. This desalination approach is particularly useful and promising for treatment of highly saline water. These new interfacial evaporators utilized graphene oxide (GO), reduced graphene oxide (RGO), molybdenum disulfide (MoS₂), and polydopamine (PDA). The solar conversion efficiency and environmental sustainability of the interfacial evaporators were optimized via (i) novel and versatile bottom-up biofabrication (e.g., incorporation of photothermal materials during bacterial nanocellulose (BNC) growth) and (ii) easy and cost-effective top-down preparation (e.g., modification of natural wood with photothermal materials). Third, we have developed membranes for PMD that incorporate photothermal materials to generate heat under solar irradiation, thus providing a higher transmembrane temperature difference and higher driving force for effective vapor transport, making the membrane distillation process more energy-efficient. Lastly, this Account compares the photothermal membrane applications, summarizes current challenges for photothermal membrane applications, and offers future directions to facilitate the translation of photothermal membranes from the laboratory to large engineered systems by improving their scalability, stability, and sustainability.

Three-Dimensional Porous Solar-Driven Interfacial Evaporator for High-Efficiency Steam Generation under Low Solar Flux

Solar steam generation is critical for many important solar-thermal applications, but is challenging to achieve under low solar flux due to the large evaporation enthalpy of water. Here, we demonstrate a three-dimensional porous solar-driven interfacial evaporator that can generate 100 °C steam under 1 sun illumination with a record high solar-to-steam conversion efficiency of 48%. The high steam generation efficiency is achieved by localizing solar-thermal heating at the evaporation surface and controlling the water supply onto the porous evaporator through tuning its surface wettability, which prevents overheating of the evaporator and thus minimizes conductive, convective, and radiative heat losses from the evaporator. The design of steam outlet located at the sidewall of the evaporator rather than from the solar absorber surface not only facilitates the collection of generated steam, but also avoids potential blockage of solar radiation by the condensing steam. The high-efficiency solar-driven evaporator has been used to generate hot steam for outdoor removal of paraffin on the wall of oil pipelines, offering a promising solution to mitigate the wax deposition issue in petroleum extraction processes.

Patterned Surfaces for Solar-Driven Interfacial Evaporation

Solar-driven interfacial evaporation, as one of the most effective ways to convert and utilize solar energy, has attracted lot of interest recently. Most of the previous research studies, however, mainly focused on nonpatterned solar absorbers by improving the structural and chemical characteristics of the solar absorbers used in the interfacial evaporation systems. In this work, we investigated the influence of patterned surface on the evaporation performance of solar absorbers. The patterned surfaces studied, which include black patterns and white patterns, were achieved by selectively printing carbon black on the air-laid paper. Such a design leads to the lateral temperature differences between adjacent patterns of the solar absorber under solar illumination. The temperature differences result in the lateral heat and mass transfer between those patterns, which can effectively accelerate solar-driven vapor generation. With similar patterns and same coverage of carbon black, the increase in the circumference of the surface patterns leads to the increase in the evaporation performance. Additionally, we found that the evaporation performance can be optimized through the design of surface patterns, which demonstrates the potential in reducing the usage of the light-absorbing materials in the solar absorber. The findings in this work not only expand the understanding of the interfacial evaporation systems but also offer additional guidelines in designing interfacial evaporation systems.

Bifunctional, Moth-Eye-Like Nanostructured Black Titania Nanocomposites for Solar-Driven Clean Water Generation

Solar steam generation and photocatalytic degradation have been regarded as the most promising techniques to address clean water scarcity issues. Although enormous efforts have been devoted to exploring high-efficiency clean water generation, many challenges still remain in terms of single decontamination function, relatively low efficiency, and inability to practical application. Herein, we first report the bioinspired fabrication of black titania (BT) nanocomposites with moth-eye-like nanostructures on carbon cloth for solar-driven clean water generation through solar steam generation and photocatalytic degradation. The moth-eye-like BT nanoarrays can largely prolong the effective propagation path of absorbing light and enhance the scattering of light, thereby exhibiting outstanding light absorption of 96% in the full spectrum. Such hierarchical-nanostructured BT nanocomposites not only impressively achieve solar steam efficiency of 94% under a simulated light of 1 kW m^-2 but also show the prominent performance of desalination and steam generation in real life condition. In addition, 96% of rhodamine B is degraded using BT nanocomposites as a photocatalyst in 100 min. The moth-eye-like bioinspired designing concept and bifunctional applications in this study may open up a new strategy for maximizing solar energy utilization and clean water generation.