Fenton-Like Catalysis and Oxidation/Adsorption Performances of Acetaminophen and Arsenic Pollutants in Water on a Multimetal Cu-Zn-Fe-LDH

An Anchored Fe-Cu LDH onto a Polyvinylidene Fluoride Membrane with Strong Peroxymonosulfate Activation-Induced Degradation of Methylene Blue and Self-Cleaning Property of Oil/Water Separation

Developing a strong catalytic antifouling membrane to achieve efficient sewage purification has great potential for alleviating water crisis. In this work, we designed and prepared an Fe/Cu-layered double hydroxide (Fe-Cu LDH)-coated polyvinylidene fluoride (PVDF) composite membrane (PVDF/Fe-Cu LDHs) with strong antifouling and activating peroxymonosulfate (PMS) catalytic degradation performance through polydopamine-coordination anchoring and hydrothermal reaction. The results showed that abundant hydroxyl groups of the LDH surface endowed the superhydrophilicity (water contact angle <10°) and underwater superoleophobicity (underwater-oil contact angle >150°) of the membrane surface, which displayed outstanding resistance to crude oil adhesion. With assistance of the LDH surface-bound sulfate radical of the peroxymonosulfate system, the PVDF/Fe-Cu LDH membrane demonstrated robust catalytic degradation performance for the methylene blue (MB) in the dark; the degradation rate constant (k, min-1) reached 0.96. Meanwhile, facing the oily wastewater, the selective wettability and charge effect of LDH of the surface made the PVDF/Fe-Cu LDH membrane realize the separation for the various surfactant-free and surfactant-stabilized emulsions. Importantly, the PMS-activation catalytic produced the ROS (•SO4-,•OH, •O2-, and 1O2), which enhanced the regeneration of the fouled PVDF/Fe-Cu LDH membrane and obtained a high flux recovery ratio in the dark (94.7%) after 10 cycles of separation experiments. Hence, we believed that the PVDF/Fe-Cu LDH membrane can provide inspiration for the development and further practical application of antifouling membranes.

Photocatalytically active layered double hydroxide-PVDF composite membranes for effective remediation of dyes contaminated water

In this work, polyvinylidene fluoride (PVDF) intercalated CuFe layered double hydroxides (LDH) membranes were fabricated and investigated for UV-LED/persulfate degradation of methylene blue (MB), crystal violet (CV), methyl orange (MO), and Eriochrome black T (EBT) dyes from water. The PVDF-CuFe membrane exhibited improved heterogeneity, surface functionality (CuO, Fe-O, Cu-O-Fe), surface roughness, and hydrophilicity. The process parameters were optimized by response surface methodology, and maximum MB removal (100%) was achieved within 45.22-178.5 min at MB concentration (29.45-101.93 mg/L), PP concentration (0.5-2.41 g/L) and catalyst dosage (1.84-1.95 g/L). The degradation kinetics was well described by a pseudo-first-order model (R2 = 0.982) and fast reaction rate (0.029-0.089/min). The MB dye degradation mechanism is associated with HO·/SO4•- reactive species generated by Fe3+/Fe2+ or Cu2+/Cu+ in PVDF-CuFe membrane and PP dissociation. The PVDF-CuFe membrane demonstrated excellent recyclability performance with a 12% reduction after five consecutive cycles. The catalytic membrane showed excellent photocatalytic degradation of crystal violet (100%), methyl orange (79%), and Eriochrome black T (60%). The results showed that UV-LED/persulfate-assisted PVDF-CuFe membranes can be used as a recyclable catalyst for the effective degradation of dye-contaminated water streams.

Progress in layered double hydroxides (LDHs): Synthesis and application in adsorption, catalysis and photoreduction

Layered double hydroxides (LDHs), also known as anionic clays, have attracted significant attention in energy and environmental applications due to their exceptional physicochemical properties. These materials possess a unique structure with surface hydroxyl groups, tunable properties, and high stability, making them highly desirable. In this review, the synthesis and functionalization of LDHs have been explored including co-precipitation and hydrothermal methods. Furthermore, extensive research on LDH application in toxic pollutant removal has shown that modifying or functionalizing LDHs using materials such as activated carbon, polymers, and inorganics is crucial for achieving efficient pollutant adsorption, improved cyclic performance, as well as effective catalytic oxidation of organics and photoreduction. This study offers a comprehensive overview of the progress made in the field of LDHs and LDH-based composites for water and wastewater treatment. It critically discusses and explains both direct and indirect synthesis and modification techniques, highlighting their advantages and disadvantages. Additionally, this review critically discusses and explains the potential of LDH-based composites as absorbents. Importantly, it focuses on the capability of LDH and LDH-based composites in heterogeneous catalysis, including the Fenton reaction, Fenton-like reactions, photocatalysis, and photoreduction, for the removal of organic dyes, organic micropollutants, and heavy metals. The mechanisms involved in pollutant removal, such as adsorption, electrostatic interaction, complexation, and degradation, are thoroughly explained. Finally, this study outlines future research directions in the field.

Satisfactory degradation of tetracycline by a pH-universal CoFe-LDH/MoS2 heterojunction catalyst in Fenton process

Fenton or Fenton-like reactions have been widely used in various fields, including solar energy conversion to generate hydroxyl radicals, environmental remediation, biology, and life science. However, the slow Fe3+/Fe2+ cycle and narrow applicable pH range still present significant challenges. Here, a heterostructured CoFe-layered double hydroxide/MoS2 nanocomposite (CoFe-LDH/MoS2) was prepared via simple electrostatic interactions. The heterostructure establishes a robust interfacial contact, leading to an abundance of exposed Mo6+ sites. Consequently, the developed CoFe-LDH/MoS2+H2O2 system exhibited superior performance in the degradation of tetracycline (>85%) within 60 min across a wide pH range from acidic to basic. Moreover, the CoFe-LDH/MoS2 heterojunction catalysts exhibited exceptional resistance to common anions and efficiently degraded various organic pollutants. The mechanism study verified that the CoFe-LDH/MoS2 had high efficiency in producing 1O2 and ‧OH to degrade various organic pollutants. The present study will serve as a foundation for creating efficient catalyst systems for related environmental remediation.

Study on the behavior and mechanism of NiFe-LDHs used for the degradation of tetracycline in the photo-Fenton process

An environment-friendly 3D NiFe-LDHs photocatalyst was fabricated via a simple hydrothermal method and characterized by means of SEM, XRD, BET, XPS and FT-IR. It is a highly efficient heterogeneous photo-Fenton catalyst for the degradation of TC-HCl under visible light irradiation. After exploring the effects of catalyst dosage, initial concentration of TC-HCl, solution pH and H2O2 concentrations, the optimal reaction conditions were determined. The experiment results showed that the degradation efficiency can reach 99.11% through adding H2O2 to constitute a photo-Fenton system after adsorption for 30 min and visible light for 60 min. After four cycles, the degradation rate decay is controlled within 21.2%, indicating that NiFe-LDHs have excellent reusable performance. The experimental results of environmental factors indicate that Fe2+ and Ca2+ promoted the degradation of TC-HCl, both Cl- and CO32- inhibited the degradation of TC-HCl. Two other antibiotics (OTC and FT) were selected for research and found to be effectively removed in this system, achieving effective degradation of a variety of typical new pollutants. The radical trapping tests and ESR detection showed that ·OH and ·O2- were the main active substances for TC degradation in the photo-Fenton system. By further measuring the intermediate products of photodegradation, the degradation pathway of TC-HCl was inferred. The toxicity analysis demonstrated that the overall toxicity of the identified intermediates was reduced in this system. This study provides a theoretical and practical basis for the removal of TC in aquatic environments.

Ce(IV)-Based Metal-Organic Gel for Ultrafast Removal of Trace Arsenate from Water

As a potential replacement for metal-organic frameworks (MOFs), constructing metal-organic gels (MOGs) is an appealing but challenging topic since MOGs are a kind of shapeable MOF gels. Also, the rapid adsorption of trace heavy metal ions in aqueous media remains a serious challenge. Herein, a simple strategy for the synthesis of Ce(IV)-based metal-organic gel (Ce-MOG) was first developed for the rapid adsorption of trace As(V). The (NH₄)₂Ce(NO₃)₆ obtains hydroxide bridges after adding apposite NaOH, leading to [Ce₆O₄(OH)₄]¹²⁺ clustering and inducing fast and excessive nucleation rates, which also leads to coordination disturbance of MOF nanocrystals to obtain Ce-MOG. The Ce-OH groups are the key to gel formation through hydrogen bonding and are the active site for the ultrafast adsorption of As(V). As expected, the resultant Ce-MOG has an excellent adsorption rate, making it possible to effectively decontaminate 500 ppb of As(V) to below the World Health Organization (WHO) recommended threshold for drinking water (10 ppb) within 1 min. It achieves equilibrium adsorption in 10 min, and the final arsenate-removing efficiency reaches 99.8%. For Ce-MOF, the effluent concentration of As(V) is higher than the drinking water standard, while equilibrium adsorption takes 60 min. The initial adsorption rate of Ce-MOG, h(k₂q_e²) is calculated and indicated to be 67.67 mg g^-1 min^-1, about 19.96 times that of Ce-MOF (3.39 mg g^-1 min^-1). As such, the excellent As(V) decontamination rate, selectivity, and reusability of Ce-MOG indicate its great potential for practical drinking water purification.

H2O2 activation and contaminants removal in heterogeneous Fenton-like systems

Emerging contaminants can be removed effectively in heterogeneous Fenton-like systems. Currently, catalyst activity and contaminant removal mechanisms have been studied extensively in Fenton-like systems. However, a systematic summary was lacking. This review summarized: 1) The effects of various heterogeneous catalysts on emerging contaminants degradation by activating H₂O₂; 2) The role of active sites in different catalysts during the activation of H₂O₂ and their contribution to the generation of active species; 3) The modulation of degradation pathways of emerging contaminants. This paper will help scholars to advance the controlled construction of active sites in heterogeneous Fenton-like systems. Suitable heterogeneous Fenton catalysts can be selected in practical water treatment processes.

A critical review on paracetamol removal from different aqueous matrices by Fenton and Fenton-based processes, and their combined methods

Paracetamol (PCT), also known as acetaminophen, is a drug used to treat fever and mild to moderate pain. After consumption by animals and humans, it is excreted through the urine to the sewer systems, wastewater treatment plants, and other aquatic/natural environments. It has been detected in trace amounts in effluents of wastewater plant treatments, sewage sludge, hospital wastewaters, surface waters, and drinking water. PCT can cause genetic code damage, oxidative degradation of lipids, and denaturation of protein in cells, and its toxicity has been well-proven in bacteria, algae, macrophytes, protozoan, and fishes. To avoid its harmful health problems over living beings, powerful Fenton and Fenton-based treatments as pre-eminent advanced oxidation processes (AOPs) have been developed because of the inefficient treatment by conventional treatments. This paper presents a comprehensive and critical review over the application of such Fenton technologies to remove PCT from natural waters, synthetic wastewaters, and real wastewaters. The characteristics and main results obtained using Fenton, photo-Fenton, electro-Fenton, and photoelectro-Fenton are described, making special emphasis in the oxidative action of the generated reactive oxygen species. Hybrid processes based on the coupling with ultrasounds, gamma radiation, photocatalysis, photoelectrocatalysis, zero-valent iron-activated persulfate, adsorption, and microbial fuel cells, are analyzed. Sequential treatments involving the initiation with plasma gliding arc discharge and post-biological process are detailed. Comparative results with other available AOPs are also described and discussed. Finally, 13 aromatic by-products and 9 short-linear aliphatic carboxylic acid detected during the PCT removal by Fenton and Fenton-based processes are reported, with the proposal of three parallel pathways for its initial degradation.

Vital Role of Synthesis Temperature in Co–Cu Layered Hydroxides and Their Fenton-like Activity for RhB Degradation

Cu and Co have shown superior catalytic performance to other transitional elements, and layered double hydroxides (LDHs) have presented advantages over other heterogeneous Fenton catalysts. However, there have been few studies about Co–Cu LDHs as catalysts for organic degradation via the Fenton reaction. Here, we prepared a series of Co–Cu LDH catalysts by a co-precipitation method under different synthesis temperatures and set Rhodamine B (RhB) as the target compound. The structure-performance relationship and the influence of reaction parameters were explored. A study of the Fenton-like reaction was conducted over Co–Cu layered hydroxide catalysts, and the variation of synthesis temperature greatly influenced their Fenton-like catalytic performance. The Co–Cut=65°C catalyst with the strongest LDH structure showed the highest RhB removal efficiency (99.3% within 30 min). The change of synthesis temperature induced bulk-phase transformation, structural distortion, and metal–oxygen (M–O) modification. An appropriate temperature improved LDH formation with defect sites and lengthened M–O bonds. Co–Cu LDH catalysts with a higher concentration of defect sites promoted surface hydroxide formation for H2O2 adsorption. These oxygen vacancies (Ovs) promoted electron transfer and H2O2 dissociation. Thus, the Co–Cu LDH catalyst is an attractive alternative organic pollutants treatment.

Photo-electrooxidation treatment of Acetaminophen in aqueous solution using BDD-Fe and BDD-Cu systems

In this study, acetaminophen (ACT) in aqueous solution was treated with electrooxidation and photo-electrooxidation processes (PEO). An electrochemical cell was used for the treatment of different concentrations of ACT (10, 50 and 80 mg L^-1). A 2³ factorial design was proposed, and the variables studied were current intensity 0.5 A (45.45 mA cm^-2) and 1.0 A (90.91 mA cm^-2), electrode configuration (anode:BDD, cathode:Fe or Cu) and presence/absence of UV light; NaCl 0.043 M (2.5 g L^-1) was used as supporting electrolyte, the initial pH was 5.5, and the treatment time was 3 h. The aqueous solutions were characterized before and after the treatment using infrared spectroscopy (FT-IR), Ultraviolet-visible spectroscopy (UV-Vis), chemical oxygen demand (COD), total organic carbon (TOC), total carbon (TC), and fluorescence spectroscopy. The optimal operating conditions using an initial ACT concentration of 80 mg L^-1 were 1.0 A, BDD-Fe configuration and UV light (254 nm). The removal efficiencies were 100% of ACT and 82.75% of TOC after 15 min of treatment. At concentrations of 50 and 10 mg L^-1, 77.16% and 50.29% of TOC were removed after 10 and 5 min of treatment, respectively. Finally, the kinetic study showed an increase in the rate constants when the UV light was applied.

CuCoFe Layered double hydroxides as laccase mimicking nanozymes for colorimetric detection of pheochromocytoma biomarkers

A laccase catalyzed colorimetric biosensing approach is promising for the detection of pheochromocytoma biomarkers, yet suffers from the poor stability of enzymes and high cost for production. Here we report for the first time an easy to produce, cheap, stable and reliable laccase-mimicking CuCoFe-LDHzyme, which can catalyze the oxidation of pheochromocytoma biomarkers to form a chromogenic product for smartphone-based colorimetric detection.

Enhanced Chemodynamic Therapy and Chemotherapy via Delivery of a Dual Threat ArtePt and Iodo-Click Reaction Mediated Glutathione Consumption

Cisplatin has been used as standard regimen for hepatocellular carcinoma (HCC), but its therapeutic efficacy is greatly limited by the drug resistance. Cisplatin alone cannot achieve an ideal therapeutic outcome. Herein, a dual threat hybrid artemisinin platinum (ArtePt) is synthesized to combine chemodynamic therapy (CDT) with chemotherapy. On the one hand, artesunate can react with intracellular ferrous ion to generate reactive oxygen species (ROS) via Fenton reaction for CDT. On the other hand, cisplatin can target DNA for chemotherapy. However, GSH in cancer cells can effectively consume free radicals and detoxify cisplatin simultaneously, which compromised the efficacy of CDT and chemotherapy. Hence, an amphiphilic polymer with an iodine atom in the side chain is designed and encapsulated ArtePt to form NP(ArtePt). This iodine containing polymer NP(ArtePt) can effectively deplete intracellular GSH via an Iodo-Click reaction, thereby enhancing the effect of CDT as well as chemotherapy. Thereafter, a patient-derived xenograft model of hepatic carcinoma (PDX^HCC ) is established to evaluate the therapeutic effect of NP(ArtePt), and a significant antitumor effect is achieved with NP(ArtePt). Overall, this study provides an effective strategy to combine CDT with chemotherapy to enhance the efficacy of cisplatin via Iodo-Click reaction, opening a new avenue for the cancer treatment.

Hierarchical Porous Iron Metal-Organic Gel/Bacterial Cellulose Aerogel: Ultrafast, Scalable, Room-Temperature Aqueous Synthesis, and Efficient Arsenate Removal

Rational design of advanced adsorbed materials with hierarchically porous architecture, high surface area, and macroscopic shapeability is of great significance for boosting their potential in practical applications. Herein, a monolithic iron metal-organic gel/bacterial cellulose (denoted as Fe-MOG/BC) composite has been successfully fabricated based on an ultrafast, scalable, aqueous-based synthetic strategy at room temperature. As expected, the resulting Fe-MOG/BC aerogel possesses a three-dimensional (3D) hierarchically porous microstructure and abundant active sites, being ultralight, water-fast, and mechanically robust. Benefiting from these unique structural characteristics, the resulting Fe-MOG/BC composite exhibits superb saturated sorption capacity (495 mg g^-1) toward arsenate, outperforming other reported nanoadsorbents. Further, the Fe-MOG/BC aerogel enables efficient decontamination of 5 ppm of As(V) to below the permitted threshold in drinking water (10 ppb) within 30 min, accompanied by excellent selectivity and reusability. Significantly, as an efficient filter unit, the Fe-MOG/BC aerogel (0.1 g) can continuously treat 3900 mL wastewater (spiked with 1 ppm As(V)) to the safe level. Such an excellent As(V) decontamination capability of Fe-MOG/BC together with the ease, low cost, and scalable production prefigures its huge prospects for practical wastewater remediation.

Enhancing As(V) and As(III) adsorption performance of low alumina fly ash with ferric citrate modification: Role of FeSiO3 and monosodium citrate

Fly ash and arsenic species have been regarded as contaminants that pollute the environment. Herein, low alumina fly ash (LAFA) was utilized to fabricate the As(V) and As(III) adsorbent via combining the routes of alkali fusion and incipient-wetness impregnation. The characterization results suggested that the grafted ferric citrate was coordinated to LAFA by substituting a Si⁴⁺ to a Fe³⁺, and the compound monosodium citrate was observed. Based on the XPS analysis, the C-O and -COO^- groups of monosodium citrate played the significant role in uptaking As(V) and As(III) species by chemical complexation, the FeOOH adsorbed As(V) and As(III) species via ion-exchange, and the Fe₂O₃ oxidize As(III) into As(V). Additionally, it was observed that the As(V) removal performance by adsorbent prepared with different modifiers was in the order of FeC₆H₅O₇ (ca. 93.7%) > C₆H₈O₇ (84%) > HCl (73%). And then, the optimal adsorbent synthesis condition for As(V) uptake was explored at ferric citrate loaded LAFA with 1:1 mass ratio (fly ash to NaOH) under temperature 923 K. The maximum monolayer adsorption capacities of the optimal adsorbent were 2725.0 μgAs(V)/g and 2281.9 μgAs(III)/g, and the removal efficiency of As(V) and As(III) was near 100% for their initial concentrations below 500 ppb, where the residual arsenic concentration met the required standard in drinking water (lower than 10 ppb).

Insights of arsenic (III/V) adsorption and electrosorption mechanism onto multi synergistic (redox-photoelectrochemical-ROS) aluminum substituted copper ferrite impregnated rGO

The understanding of mechanistic insights in environmental remediation and mitigation systems is attracting larger attention, in recent days. Here in, aluminium substituted copper ferrite impregnated rGO hybrid (CAF-rGO) is verified to understand the adsorption/electrosorption mechanism of arsenic in aqueous systems. Near-surface study (XPS: As 3d, Cu 2p, Fe 2p, Al 2p, O 1s, C 1s) proposes redox, and ligand exchange reactions between contaminant, and CAF-rGO. Adsorption capacities are observed around 128.8 mg g^-1 [As(III)], 153.5 mg g^-1 [As(V)] with Freundlich model isotherms. Kinetics study follows the PSO model with influence of solar light (> 420 nm). Cyclic voltammetry (CV) analysis in different molarity conditions observed with signals around +0.1 and -0.6 V confirm the redox abilities, and N₂/O₂ purged environments understood that electrosorption occurred through both reduction and sorption. Electrosorption study with pH variation shows the effect of protonation on the redox activity of individual arsenic species. Consistent signal around -0.6 ± 0.05 V in all the CV plots (i.e., Molarity, Environment, pH) recommends the usage of CAF-rGO for arsenic mitigation. Possible influence of photo-current (∼40 μA/cm² at ∼ 0 V) towards As(III/V) decontamination is understood though photoelectrochemical analysis. Impedance plot shows low-resistance and better diffusion of arsenic oxy-anions during light irradiation. Synergistic nature of CAF-rGO generates reactive oxygen species (i.e., ^●OH/^●O₂^-/₁O²) in mitigating highly toxic As(III) species is also detailed in the present work.

Toxicity of Zn-Fe Layered Double Hydroxide to Different Organisms in the Aquatic Environment

The application of layered double hydroxide (LDH) nanomaterials as catalysts has attracted great interest due to their unique structural features. It also triggered the need to study their fate and behavior in the aquatic environment. In the present study, Zn-Fe nanolayered double hydroxides (Zn-Fe LDHs) were synthesized using a co-precipitation method and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and nitrogen adsorption-desorption analyses. The toxicity of the home-made Zn-Fe LDHs catalyst was examined by employing a variety of aquatic organisms from different trophic levels, namely the marine photobacterium Vibrio fischeri, the freshwater microalga Pseudokirchneriella subcapitata, the freshwater crustacean Daphnia magna, and the duckweed Spirodela polyrhiza. From the experimental results, it was evident that the acute toxicity of the catalyst depended on the exposure time and type of selected test organism. Zn-Fe LDHs toxicity was also affected by its physical state in suspension, chemical composition, as well as interaction with the bioassay test medium.

Photocatalytic materials and light-driven continuous processes to remove emerging pharmaceutical pollutants from water and selectively close the carbon cycle

Past and present technologies for wastewater purification and future research directions are critically discussed in this review.

Fabrication of Anisotropic Cu Ferrite-Polymer Core-Shell Nanoparticles for Photodynamic Ablation of Cervical Cancer Cells

In this work we developed methylene blue-immobilized copper-iron nanoparticles (MB-CuFe NPs) through a facile one-step hydrothermal reaction to achieve a better phototherapeutic effect. The Fe/Cu ratio of the CuFe NPs was controllable by merely changing the loading amount of iron precursor concentration. The CuFe NPs could serve as a Fenton catalyst to convert hydrogen peroxide (H2O2) into reactive oxygen species (ROS), while the superparamagnetic properties also suggest magnetic resonance imaging (MRI) potential. Furthermore, the Food and Drug Administration (FDA)-approved MB photosensitizer could strongly adsorb onto the surface of CuFe NPs to facilitate the drug delivery into cells and improve the photodynamic therapy at 660 nm via significant generation of singlet oxygen species, leading to enhanced cancer cell-damaging efficacy. An MTT (thiazolyl blue tetrazolium bromide) assay proved the low cytotoxicity of the CuFe NPs to cervical cancer cells (HeLa cells), namely above 80% at 25 ppm of the sample dose. A slight dissolution of Cu and Fe ions from the CuFe NPs in an acidic environment was obtained, providing direct evidence for CuFe NPs being degradable without the risk of long-term retention in the body. Moreover, the tremendous photo-to-thermal conversion of CuFe NPs was examined, which might be combined with photodynamic therapy (PDT) for promising development in the depletion of cancer cells after a single pulse of deep-red light irradiation at high laser power.

Green catalytic process for in situ oxidation of Arsenic(III) in concentrated streams using activated carbon and oxygen gas

Arsenic(III) oxidation is a critical pre-treatment step for overall arsenic immobilization in concentrated industrial arsenic streams. Activated carbon (AC) catalysis is a green, economical and efficient method to oxidize As(III) from waters with high arsenic concentration prior to its removal through precipitation or adsorption. This research investigates AC-catalyzed oxidation process for oxidizing aqueous solutions of As(III) and proposed the possible reaction pathway. Batch tests were performed and efficient oxidation of 2.0 g/L acidic As(III) solution have been induced on AC surfaces in the presence of oxygen. The in-situ formation of reactive oxygen species on carbon surfaces and arsenic adsorption onto AC play important roles in As(III) oxidation. The kinetics of adsorption and catalyzed oxidation has been studied and the samples were characterized using ICP-OES, Zeta potential, TEM coupled with EDX and XPS techniques. A systematic reaction pathway was proposed, and reusability of AC has confirmed the economic viability of the proposed green process. This study offers a promising and facile solution for As(III) oxidation from waste water, mining and metal industrial waste streams under ambient conditions for arsenic immobilization.

Facile Construction of a Copper-Containing Covalent Bond for Peroxymonosulfate Activation: Efficient Redox Behavior of Copper Species via Electron Transfer Regulation

Heterogeneous catalysis can be enhanced through the construction of effective atom connection for rapid electron transport on the catalyst surface. Hence, this study proposed a new strategy for electron transfer regulation to facilitate redox cycle of Cu(II)/Cu(I). The objective was achieved by successful construction of copper-containing covalent bond through the in situ growth of porous g-C₃N₄ with oxygen dopants and nitrogen defects (O-CN_D) on CuAl_xO_y substrate (CuAl@O-CN_D). On the basis of X-ray absorption fine structure (XAFS) and other characterization results, the facilitated redox behavior of copper species by electron transfer regulation was ascribed to the formation of a C-O-Cu bond on the porous-rich superficial of the catalyst; these covalent C-O-Cu bonds shortened the migration distance of electrons between Cu(II) and Cu(I) via Cu(I)-O-C-O-Cu(II) bridge. The construction of copper-containing covalent bonds in the catalyst resulted in efficient PMS activation for a rapid redox cycle of Cu(II)/Cu(I), triggering a series of reactions involving the continuous production of three highly active species (SO₄^·-, ^·OH and ¹O₂). The rapid diffusion and transportation of the generated active species from porous structures directly attack typical pharmaceutically active compounds (PhACs), achieving superior catalytic performance. This study provides a new routine to construct a C-O-Cu bond for PMS activation by regulating the electron transfer to accelerate the redox behavior of copper species for environmental remediation.

Accelerated Redox Cycles of Fe(III)/Fe(II) and Cu(III)/Cu(II) by Photo-Induced Electron from N-CQDs for Enhanced Photo-Fenton Capability of CuFe-LDH

Layered double hydroxide (LDH) materials have shown charming photo-Fenton capability for the treatment of refractory organic wastewater. In this study, CuFe-LDH hybridized with N-doped carbon quantum dots (N-CQDs) was investigated to further enhance the photo-Fenton capability. The results showed that the assembly techniques of coprecipitation and the hydrothermal method could synthesize the target material, CuFe-LDH/N-CQDs, successfully. CuFe-LDH/N-CQDs could possess a 13.5% higher methylene blue (MB) removal rate than CuFe-LDH in 30 min due to the accelerated redox cycles of Fe(III)/Fe(II) and Cu(III)/Cu(II), resulting from the photo-induced electron transfer from N-CQDs to CuFe-LDH via a d–π conjugation electronic bridge. Moreover, CuFe-LDH/N-CQDs has excellent photo-Fenton capability in the pH range of 2–11, even after being reused five times. This study would provide an efficient and stable photo-Fenton catalyst for the treatment of refractory organic wastewater.

Recent advances in Cu-Fenton systems for the treatment of industrial wastewaters: Role of Cu complexes and Cu composites

Cu-based Fenton systems have been recognized as a promising suite of technologies for the treatment of industrial wastewaters due to their high catalytic oxidation capacity. Rapid progress regarding Cu Fenton systems has been made not only in fundamental mechanistic aspects of these systems but also with regard to applications over the past decade. Based on available literature, this review synthesizes the recent advances regarding both the understanding and applications of Cu-based Fenton processes for industrial wastewater treatment. Cu-based catalysts that are essential to the effectiveness of use of Cu Fenton reactions for oxidation of target species are mainly classified into two types: (i) Cu complexes with organic or inorganic ligands, and (ii) Cu composites with inorganic materials. Performance of the Cu-based catalysts for the removal of organic pollutants in industrial wastewaters are reviewed, with the key operating parameters illustrated. Furthermore, the roles of Cu complexes and composites in both homogeneous and heterogeneous Cu-Fenton systems are critically examined with particular focus on the mechanisms involved. Perspectives and future efforts needed for Cu-based Fenton systems using Cu complexes and composites for industrial wastewater treatment are presented.

Enhanced mineralization of reactive brilliant red X-3B by UV driven photocatalytic membrane contact ozonation

The partial oxidation on refractory organics in ozonation process and the poor performance of mass transfer between ozone (O₃) phase and liquid phase by common O₃ distribution techniques inhibit the practical application of O₃. To overcome these defects, hollow fiber membrane was applied in membrane contact ozonation (MCO)-UV process for the reactive brilliant red X-3B (RBRX-3B) degradation. The efficiency of mass transfer was guaranteed due to the enormous gas/liquid contact area supplied in this bubble-less O₃ transfer process. UV photolysis not only significantly improved the O₃ utilization efficiency but also accelerated the mineralization of RBRX-3B by promoting O₃ to decompose to hydroxyl radicals (OH). When 15 mg/L of O₃ was supplied at flow rate of 0.2 L/min, and a liquid velocity of 0.453 m/s, the chemical oxygen demand (COD) removal and total organic carbon (TOC) removal reached 90 % and 77 %, respectively. The rate constant for TOC removal in the MCO-UV process (7.89 × 10^-3 min^-1) was 3.08 and 6.12 times higher than that in MCO and UV photolysis processes, respectively. Furthermore, the mineralization efficiency (ΔCOD/ΔO₃ = 0.84 mg/mg) and electrical energy per mass (E_EM = 4.7 kW h/kg) were calculated and these results indicated a promising future for the MCO-UV process.

Enhanced photocatalytic degradation of 2-thiobenzimidazole by the tris(8-quinolinolato)cobalt(iii) complex through peroxide adduct formation: theoretical and experimental investigations

HOMO–LUMO influenced photocatalytic degradation of 2-thiobenzimidazole through a thermodynamically favored route has been achieved by the cobalt(iii) Schiff base complex.

Polymerization of micropollutants in natural aquatic environments: A review

Micropollutants with high ecotoxicological risks are frequently detected in aquatic environments, which has aroused great concern in recent years. Humification is one of the most important natural detoxification processes of aquatic micropollutants, and the core reactions of this process are polymerization and coupling. During humification, micropollutants are incorporated into the macrostructures of humic substances and precipitated from aqueous systems into sediments. However, the similarities and differences among the polymerization/coupling pathways of micropollutants in different oxidative systems have not been systematically summarized in a review. This article reviews the current knowledge on the weak oxidation-induced spontaneous polymerization/coupling transformation of micropollutants. First, four typical weak oxidative conditions for the initiation of micropollutant polymerization reactions in aquatic environments are compared: enzymatic catalysis, biomimetic catalysis, metal oxide oxidation, and photo-initiated oxidation. Second, three major subsequent spontaneous transformation pathways of micropollutants are elucidated: radical polymerization, nucleophilic addition/substitution and cyclization. Different solution conditions are also summarized. Furthermore, the importance of toxicity evolution during the weak oxidation-induced coupling/polymerization of micropollutants is particularly emphasized. This review provides a new perspective for the transformation mechanism and pathways of micropollutants from aquatic systems into sediments and the atmosphere and offers theoretical support for developing micropollutant control technologies.

The Sonophotocatalytic Degradation of Pharmaceuticals in Water by MnOx-TiO2 Systems with Tuned Band-Gaps

Advanced oxidation processes (AOPs) are technologies to degrade organic pollutants to carbon dioxide and water with an eco-friendly approach to form reactive hydroxyl radicals. Photocatalysis is an AOP whereby TiO2 is the most adopted photocatalyst. However, TiO2 features a wide (3.2 eV) and fast electron-hole recombination. When Mn is embedded in TiO2, it shifts the absorption wavelength towards the visible region of light, making it active for natural light applications. We present a systematic study of how the textural and optical properties of Mn-doped TiO2 vary with ultrasound applied during synthesis. We varied ultrasound power, pulse length, and power density (by changing the amount of solvent). Ultrasound produced mesoporous MnOx-TiO2 powders with a higher surface area (101–158 m2 g−1), pore volume (0-13–0.29 cc g−1), and smaller particle size (4–10 µm) than those obtained with a conventional sol-gel method (48–129 m2 g−1, 0.14–0.21 cc g−1, 181 µm, respectively). Surprisingly, the catalysts obtained with ultrasound had a content of brookite that was at least 28%, while the traditional sol-gel samples only had 7%. The samples synthesized with ultrasound had a wider distribution of the band-gaps, in the 1.6–1.91 eV range, while traditional ones ranged from 1.72 eV to 1.8 eV. We tested activity in the sonophotocatalytic degradation of two model pollutants (amoxicillin and acetaminophen). The catalysts synthesized with ultrasound were up to 50% more active than the traditional samples.

Mechanism of Synergistic Effect on Electron Transfer over Co-Ce/MCM-48 during Ozonation of Pharmaceuticals in Water

The same amount of metal was deposited on the surface of three-dimensional mesoporous MCM-48 by a facile impregnation-calcination method for catalytic ozonation of pharmaceutical and personal-care products in the liquid phase. At 120 min reaction time, Co/MCM-48 and Ce/MCM-48 showed 46.6 and 63.8% mineralization for clofibric acid (CA) degradation, respectively. Less than 33% mineralization was achieved with Co/MCM-48 and Ce/MCM-48 during sulfamethazine (SMZ) ozonation. In the presence of monometallic oxides modified MCM-48 catalysts, total organic carbon (TOC) removal of diclofenac sodium (DCF) was around 80%. The composite Co-Ce/MCM-48 catalyst exhibited significantly higher activity in terms of TOC removal of CA (83.6%), SMZ (51.7%) and DCF (86.8%). Co-Ce/MCM-48 inhibited efficiently the accumulation of small molecular carboxyl acids during ozonation. A detailed research was conducted to detect the nature of material structure and mechanism of catalytic ozonation by using a series of characterizations. The main reaction pathway of CA was determined by the analysis of liquid chromatography-mass spectrometry, in line with the results of frontier electron density calculations that reactive oxygen species (ROSs) were easy to attack negative regions of pharmaceuticals. The Si-O-Si, Co···HO-Si-O-Si-OH···Ce, and O₃···Co-HO-Si-O-Si-OH···Ce-OH···O₃ basic units in catalysts were constructed to detect the orbit-energy-level difference. The results revealed that a synergistic effect existed at the interface between cobalt and cerium oxides over MCM-48, which facilitated the ROSs sequence in solution with ozone. Therefore, the multivalence redox coupling of Ce⁴⁺/Ce³⁺ and Co³⁺/Co²⁺ along with electron transfer played an important role in catalytic ozonation process.

Synergistic deep removal of As(III) and Cd(II) by a calcined multifunctional MgZnFe-CO3 layered double hydroxide: Photooxidation, precipitation and adsorption

A high removal rate (>99.7%) of combined arsenite (As(III)) and Cd (Cd(II)) in low concentration (1000 μg/L) from contaminated water was achieved by a calcined MgZnFe-CO₃ layered double hydroxide (CMZF) adsorbent. Batch control studies and a series of spectroscopy detection technologies were employed to investigate the removal mechanism and interactions between As(III) and Cd(II) on the interface of water/CMZF. Synergistic adsorption and photooxidation occurred based on the systematical kinetic and isotherm studies. The enhanced removal of As(III) was achieved by the photooxidation, formation of ternary As(III)Cd(II) surface complexes and enhanced hydrogen bond. Meanwhile, oxidative formed negative charged As(V) could reduce the electrostatic repulsion force between Cd(II) cations and play a role as anion bridging, consequently resulted in a stronger attraction between CMZF and Cd(II). Combined with the verdicts of relevant characterizations such as XRD, XPS and EPR, it was assumed that the deep co-removal mechanism could be attributed to the coupling of various processes including intercalation, complexation, photooxidation of As(III) and precipitation of CdCO₃. Moreover, the successful removal of As(III) and Cd(II) from real water matrix qualified the CMZF a potentially attractive adsorbent for both As(III) and Cd(II) deep treatment in practical engineering.

Efficient Fenton-like Process Induced by Fortified Electron-Rich O Microcenter on the Reduction State Cu-Doped CNO Polymer

The discharge of organic pollutants threatens the environment and health and is also a waste of organic energy. Here, the reduction state Cu (RSC) species-doped carbon-nitrogen-oxygen polymer (RSC-CNOP) is synthesized from high-temperature polymerization of a Cu-polyimide precursor, which is used as a Fenton-like catalyst and exhibits excellent performance for pollutant degradation, accompanied by the utilization of the electron energy of the pollutants. Experiments and theoretical calculations reveal the promotion mechanism. The formed Cu(RSC)-O-C(π) electron-transfer bridges in RSC-CNOP induce the bidirectional electron transfers from RSC to O and from C(π) to O (RSC → O ← π), forming the polarized reaction micro-areas (reinforced electron-rich O microcenters and electron-poor C(π) microcenters). The free electrons in electron-rich centers of RSC-CNOP are as many as ∼8 times that of the pure CNOP sample from the electron paramagnetic resonance measurement. Pollutants are oxidized by supplying electrons to electron-poor microcenters, and H₂O₂ can be selectively reduced to ^•OH (also destruct pollutants) in the electron-rich microcenter over RSC-CNOP. This work reveals that the energy and electrons of pollutants can be efficiently utilized in the Fenton-like system through constructing and reinforcing the polarized dual reaction microcenters.

Redox synergistic Mn-Al-Fe and Cu-Al-Fe ternary metal oxide nano adsorbents for arsenic remediation with environmentally stable As(0) formation

Arsenic mitigation behavior in aqueous systems is being evaluated for Mn-Al-Fe, Cu-Al-Fe nano adsorbents. Morphological, and vibrational spectroscopy analysis are observed with As-OH, and As-O surface complexes. XPS study of individual As(3d) spectra at different parameters is observed with multiplet peak behavior attributed to redox behavior of Mn-Al-Fe, Cu-Al-Fe. Significant proportions of As(0) signal (∼25 at.% in pH 7, ∼78 at.% in pH 2, ∼58 at.% in pH 12) implicate an environmentally stable behavior of these adsorbents to address the arsenic leaching issue. Adsorption kinetics are observed with Pseudo Second Order (PSO) model, and Freundlich model supported multilayer adsorption behavior is observed for adsorption isotherms. Trace metal voltammetry studies are observed with 75-90 % of As(III) mitigation in aliquot samples. Detailed study of Mn(2p), Cu(2p), Fe(2p), and O(1 s) spectra explains redox active, and surface ligand exchange synergism in arsenic adsorption. Low equilibrium concentrations (Ce < 10 ppb) in As(V) systems (C_i ∼ 100 and 500 ppb) indicate the drinking water application of these systems. Cyclic-voltammetry (CV) studies implicate the mitigation and immobilization of arsenic species onto adsorbent by both reduction, and sorption phenomenon.

Enhanced Removal of Veterinary Antibiotic Florfenicol by a Cu-Based Fenton-like Catalyst with Wide pH Adaptability and High Efficiency

The study on the removal of refractory veterinary antibiotic florfenicol (FF) in water is still very limited. In this study, an efficient Fenton-like catalyst was developed by synthesizing a series of Cu-based multi-metal layered double hydroxides (CuNiFeLa-LDHs) to degrade FF in aqueous solution. In the experiments, the screened CuNiFeLa-2-LDH with the molar ratio of La³⁺/(Fe³⁺ + La³⁺) = 0.1 exhibited high catalytic activity, achieving almost complete degradation of 5 mg L^-1 FF under 5 mmol L^-1 H₂O₂ conditions. The mechanisms revealed that the enhanced catalytic performance was ascribed to the existence of Ni which accelerated the electron transfer rate and La which served as a Lewis acidic site to provide more reactive sites in this Cu-dominated Fenton-like reaction, further generating ^•OH, ^•O₂ ^-, and O₂ ¹ as active species to attack pollutants directly. Interestingly, the catalyst showed a wide pH adaptability and little release of copper ions to the solution. The regenerated CuNiFeLa-2-LDH is demonstrated to be a stable and reliable material for florfenicol degradation.

UV absorber co-intercalated layered double hydroxides as efficient hybrid UV-shielding materials for polypropylene

UV absorber co-intercalated layered double hydroxides can efficiently shield UV light and greatly enhance the anti-photoaging performance of polypropylene.

Efficient degradation of organic pollutants by peroxymonosulfate activated with MgCuFe-layered double hydroxide

In this study, MgCuFe-layered double hydroxide (MgCuFe-LDH) was for the first time used as a catalyst for peroxymonosulfate (PMS) activation towards the degradation of aqueous organic pollutants. Compared with both MgFe-LDH and MgCuAl-LDH materials, MgCuFe-LDH exhibited significantly higher catalytic activity to activate PMS for the degradation of acetaminophen. The effects of catalyst loading, PMS dosage, reaction temperature and initial solution pH on the degradation efficiency of acetaminophen were investigated. Acetaminophen (5 mg L⁻¹) degradation at about 93.0% was achieved at 20 min by using 0.3 g L⁻¹ MgCuFe-LDH and 0.5 mM PMS. Under the same conditions, rhodamine B (RhB, 5 mg L⁻¹) can be almost completely decolorized (99.5%) within 45 min. Radical scavenger and electron paramagnetic resonance (EPR) experiments showed that sulfate radicals (SO₄˙⁻) and hydroxyl radicals (·OH) existed in PMS/MgCuFe-LDH system. The generated radicals played vital roles in the catalytic degradation of organic pollutants. A possible activation mechanism of PMS on MgCuFe-LDH was put forward. This study indicates that MgCuFe-LDH is a promising catalyst to activate PMS for the efficient degradation of organic pollutants.

MgCuFe-layered double hydroxide exhibited high catalytic activity to activate peroxymonosulfate for degradation of organic pollutants. SO₄˙⁻ and ·OH are the main reactive radicals involved in the degradation of organic pollutants.

Comparative study on synchronous adsorption of arsenate and fluoride in aqueous solution onto MgAlFe-LDHs with different intercalating anions

In this study, a series of MgAlFe-LDHs (Cl-, NO3 -, intercalation, and calcined products of a CO3 2- interlayer) was synthesized and used for adsorption of arsenate and fluoride in individual contaminants and coexisting pollutant systems. Effects of various factors such as initial pH of solution, dosage of materials, coexisting ions, contact time, and initial pollutant concentrations were evaluated. Experimental results showed that different intercalating anions had a significant effect on adsorption performance of arsenate and fluoride in water. The adsorption of arsenate and fluoride on MgAlFe-CLDH, MgAlFe-Cl-LDH or MgAlFe-NO3-LDH can be described by different adsorption isotherm equations. During the simultaneous removal process, arsenate and fluoride competed for adsorption sites of the adsorbent materials, and the fluoride ions had advantages in the competitive adsorption on MgAlFe-Cl-LDH and MgAlFe-NO3-LDH. MgAlFe-NO3-LDH was used to adsorb arsenate and fluoride in coexisting pollution systems (the concentration of each pollutant was 2 mg L-1, the adsorbent dosage was 1.5 g L-1). The remaining arsenic concentration was reduced to less than 10 μg L-1 and the remaining fluoride ion concentration to below 20 μg L-1 which meets the World Health Organization's, EPA's and China's drinking water standards for arsenic and fluoride limits. A possible mechanism is discussed with support from further XRD, SEM, and XPS analysis of the materials after their adsorption.

Multipath fabrication of hierarchical CuAl layered double hydroxide/carbon fiber composites for the degradation of ammonia nitrogen

In this work, a series of flower-like CuAl layered double hydroxides (LDHs) and hierarchical CuAl/carbon fiber-LDH (CuAl/CF-LDH) materials were synthesized, and these materials were used as catalysts for the degradation of ammonia nitrogen from simulated wastewater. The morphologies and structures of the materials were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy (RS), X-ray diffraction (XRD), and the Brunauer-Emmett-Teller (BET) technique. The effects of the catalyst and H₂O₂ loading dosages, reaction temperature, pH, Cu/Al ratio of the samples, and contact time on the degradation process were investigated by degrading ammonia nitrogen under different conditions, and the possible degradation mechanism was discussed. CuAl/CF-LDH exhibited more effectively catalytically degradation of ammonia nitrogen than others as-prepared samples, and removal efficiency reached 99.7% under the optimized conditions. The reusing capability and stability of the materials were studied. Meanwhile, the versatility of the materials was investigated by testing their performance in the absorption of azo dye, the highest removal efficiency was found to be 99.28%. The prepared materials are promising for use as effective catalysts for the degradation of ammonia nitrogen from wastewater.

Co-Mn layered double hydroxide as an effective heterogeneous catalyst for degradation of organic dyes by activation of peroxymonosulfate

In this study, Co-Mn layered double hydroxide (Co-Mn LDH) was synthesized, characterized, and tested as heterogeneous catalyst to activate peroxymonosulfate (PMS) for degradation of organic dyes. The results of characterization showed that Co-Mn LDH had high purity, uniform morphology and large specific surface area (49.9379 m²/g). The degradation experiments demonstrated that five different dyes with the concentration of 50 mg/L could be decomposed completely within 240 s using only 0.025 g/L of Co-Mn LDH and 0.1 g/L of PMS. Moreover, Co-Mn LDH/PMS system presented the highest decomposition efficiency for acid orange G (AOG) compared with other related materials under the same condition. Further investigation found that Co-Mn LDH/PMS system had an excellent adaptability in a wide pH range (from 3 to 10), and the best efficiency was achieved when the solution was natural (pH = 6.87). The mineralization of AOG was assessed by Total Organic Carbon (TOC), and 52.2% of TOC was removed. Meanwhile, the good reusability and high stability of Co-Mn LDH were demonstrated by recycle tests and ion-leaching tests. The catalytic mechanism was explored through quenching tests as well as X-ray photoelectron spectroscopy (XPS) analysis. Finally, all of the results suggested that Co-Mn LDH/PMS system with high stability and decomposition efficiency was suitable for the remediation of organic dyes in wastewater.

ZnFe-Cl nanolayered double hydroxide as a novel catalyst for sonocatalytic degradation of an organic dye

ZnFe nanolayered double hydroxide (NLDH) with anions of Cl^- in its interlayer space was synthesized using a facile co-precipitation method. The synthesized ZnFe-Cl NLDH was characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), N₂ adsorption/desorption, diffuse reflectance spectroscopy (DRS) and point of zero charge pH (pHpzc) analyses. In this research, the sonocatalytic activity of the as-prepared NLDH was investigated for removal of acid red 17 as model pollutant. The effects of the operating parameters including sonocatalyst concentration, pH, initial dye concentration, intensity of ultrasonic irradiation and the presence of radical scavengers and process enhancers were studied on the sonocatalytic degradation of acid red 17. The decreased decolorization efficiency in the presence of the radical scavengers confirmed that the free radicals play the basic roll in the degradation of acid red 17 molecules. In addition a probable mechanism for degradation of acid red 17 through the sonocatalytic process was proposed according to the identified intermediates detected using gas chromatography-mass (GC-MS) spectroscopy.

Nanosheet Array-Like Palladium-Catalysts Pdx/rGO@CoAl-LDH via Lattice Atomic-Confined in Situ Reduction for Highly Efficient Heck Coupling Reaction

A series of novel nanosheet array-like catalysts Pd_x/rGO@CoAl-LDH (x = 0.0098-1.9, refers to Pd loading in wt % on ICP, rGO: reduced graphene oxide, LDH: layered double hydroxide) were first prepared via a simple and green lattice atomic-confined in situ reduction of oxidative Pd precursors by the evenly atomic-dispersed reductive Co²⁺ sites on LDH layers of a nanohybrid rGO@CoAl-LDH with hexagonal LDH nanoplates (∼73 × 7 nm) interdigitated vertical to the surfaces of rGO layer in both sides, fabricated through a simple citric acid-assisted aqueous-phase coprecipitation method. The as-obtained Pd catalysts possess clean Pd nanoclusters (NCs) with tunable sizes in 1.3-1.8 nm on varied Pd loadings. All the Pd_x/rGO@CoAl-LDH catalysts show excellent activities for the Heck reaction, and the Pd_0.0098/rGO@CoAl-LDH with the ultrafine Pd NCs of 1.3 ± 0.2 nm yields a maximum turnover frequency of 160 000 h^-1 over a heterogeneous catalyst so far. The excellent activities can be attributed to the ultrasmall Pd NCs with high dispersion and clean Pd surfaces, increased electron transfer capacity and surface area, and remarkable Pd-CoAl-LDH-rGO three-phase synergistic effect of the present unique nanosheet array-like Pd NCs catalysts. Moreover, the catalyst Pd_0.33/rGO@CoAl-LDH shows a broad range of substrate applicability and can be reused more than five runs without obvious loss of activity, giving the present catalysts long-term stability. These findings make the rGO@CoAl-LDH hybrid prepared by a facile and scalable synthesis route a universal green platform to support other noble or nonprecious metal NCs via lattice atomic-confined in situ reduction strategy to construct more desired heterogeneous catalysts.

Synthesis of Water-Dispersible Single-Layer CoAl-Carbonate Layered Double Hydroxide

Despite extensive study on single-layer layered double hydroxides (SL-LDHs) with NO₃^- counterions, SL-LDHs with CO₃^2- counterions (CO₃^2- SL-LDHs) have never been prepared before. Herein, a CoAl-CO₃^2- SL-LDH which stays stable in water and powdery state is first synthesized using ethylene glycol as a reaction medium. The SL-LDH, with thickness of ∼0.85 nm, is composed of one Co(Al)O₆ layer sandwiched between two CO₃^2- layers. The SL-LDH powder shows high specific surface area (∼289 m²/g) and excellent electrocatalytic oxygen evolution efficiency. This work provides the first simple way to prepare CO₃^2- SL-LDHs and will open an avenue for synthesizing other SL-LDHs.