Oil-Repellent Antifogging Films with Water-Enabled Functional and Structural Healing Ability

Si-doped carbonized polymer dot as robust hydrophilic coating using for high efficiency antifogging

Hydrophilic coating can prevent surface from fogging but its application is limited by low mechanical performance. In this study, a hydrophilic coating was prepared by crosslinking the Si-doped carbonized polymer dot (Si-CPD) with 3-glycidyloxypropyltrimethoxysilane (GPTMS) and ethylene oxide (EO). The hydrophilic coating can be used as robust hydrophilic anti-fogging coating. The Si-CPD derived from ethylene diamine tetraacetic acid (EDTA) and aminopropyl oligosiloxanes (APOS) was successfully prepared via one-step hydrothermal method. Then, a resin solution was prepared by mixing Si-CPD, GPTMS and EO. Epoxy group of GPTMS and EO can react with amino group of Si-CPD. Finally, a composite coating with antifogging function can be obtained by simple heating curing. Due to the introduction of hydroxyl which derived from EO, the coating shows excellent antifogging performance. Meanwhile, the presence of inorganic component endows the coating with outstanding mechanical performance. The coating has great potential in related applications, such as optical lenses, mirrors and other transparency substrates.

Transparent and Superhydrophilic Flexible Protein Films with Antifogging and Self-Cleaning Attributes

Cyanoglycoside-modified flexible protein films, exhibiting a high level of transparency of ≈46 to 83%, were successfully prepared from lysozyme and glycerol with varying amounts of amygdalin (20, 40, and 60%) using water as a solvent. The increasing percentage of amygdalin leads to a drastic improvement of the hydrophilicity of the surface with a decrease in the water contact angle to 5.6°, resulting in superhydrophilicity. The increasing percentage of amygdalin led to a significant improvement in the surface's hydrophilicity, resulting in a reduced water contact angle of 5.6° and achieving superhydrophilicity. This superhydrophilic characteristic is particularly relevant to the excellent antifogging and self-cleaning properties of the resulting protein films. In addition to enhanced flexibility, the films also exhibited considerably improved thermal stability with a 40% loading of amygdalin in the protein solution. The superior mechanical, optical, and thermal properties of amygdalin-modified films are due to the strong hydrogen bonding with the peptides of lysozyme, as evidenced by the disappearance of amide bands in the cured protein films. Therefore, these transparent protein films, with their antifogging and enhanced thermal stability properties, can be potentially used for different packaging and coating applications.

Antimicrobial films fabricated with myricetin nanoparticles and chitosan derivation microgels for killing pathogenic bacteria in drinking water

Pathogenic bacteria in drinking water threaten human health and life. In the work, antimicrobial films composed of myricetin@tannic acid (My@TA) nanoparticles (NPs) and chitosan derivation microgels were developed to kill pathogenic bacteria in drinking water. Hydrophobic My was first made into water soluble My@TA NPs using a solvent exchange method with TA as stabilizer. Polymeric microgels of carboxymethyl chitosan (CMCS)/hydroxypropyltrimethyl ammonium chloride chitosan (HACC) were then fabricated with a blending method. CMCS&HACC/My@TA multilayer films were further deposited on the internal surface of PET bottles by using a layer-by-layer (LbL) assembly technique. The PET bottles coated with the films could effectively kill pathogenic bacteria in water such as S. aureus, E. coli, Staphylococcus epidermidis, Pseudomonas fluorescens, Listeria monocytogenes and methicillin resistant Staphylococcus aureus (MRSA). In addition, CMCS&HACC/My@TA films displayed good antioxidant activity, water resistance, and in vivo biocompatibility with heart, liver, spleen, lung and kidney organs. We believe that the container coated with CMCS&HACC/My@TA films can be applied to prevent microbial contamination of drinking water.

Self-healing polymers for surface scratch regeneration

Recently, there has been a significant increase in academic and industrial interest in self-healing polymers (SHPs) due to their remarkable ability to regenerate scratched surfaces and materials of astronomical significance. Scientists have been inspired by the magical repairing mechanism of the living world. They transformed the fiction of self-healing into reality by designing engrossing polymeric materials that could self-repair mechanical abrasions repeatedly. As a result, the durability of the materials is remarkably improved. Thus, the idea of studying SHPs passively upholds economic and environmental sustainability. However, the critical areas of self-healing (including healing efficiency, healing mechanism, and thermo-mechanical property changes during healing) are under continuous scientific improvisation. This review highlights recent notable advances of SHPs for application in regenerating scratched surfaces with various distinctive underlying mechanisms. The primary focus of the work is aimed at discussing the impact of SHPs on scratch-healing technology. Beyond that, insights regarding scratch testing, methods of investigating polymer surfaces, wound depths, the addition of healing fillers, and the environmental conditions maintained during the healing process are reviewed thoroughly. Finally, broader future perspectives on the challenges and prospects of SHPs in healing surface scratches are discussed.

Hydrophilic and Hydrophobic Surfaces: Features of Interaction with Liquid Drops

The processes of interaction of liquid droplets with solid surfaces have become of interest to many researchers. The achievements of world science should be used for the development of technologies for spray cooling, metal hardening, inkjet printing, anti-icing surfaces, fire extinguishing, fuel spraying, etc. Collisions of drops with surfaces significantly affect the conditions and characteristics of heat transfer. One of the main areas of research into the interaction of drops with solid surfaces is the modification of the latter. Changes in the hydrophilic and hydrophobic properties of surfaces give the materials various functional properties-increased heat transfer, resistance to corrosion and biofouling, anti-icing, etc. This review paper describes methods for obtaining hydrophilic and hydrophobic surfaces. The features of the interaction of liquid droplets with such surfaces are considered. The existing and possible applications of modified surfaces are discussed, as well as topical areas of research.

Self-Healing Superwetting Surfaces, Their Fabrications, and Properties

The research on superwetting surfaces with a self-healing function against various damages has progressed rapidly in the recent decade. They are expected to be an effective approach to increasing the durability and application robustness of superwetting materials. Various methods and material systems have been developed to prepare self-healing superwetting surfaces, some of which mimic natural superwetting surfaces. However, they still face challenges, such as being workable only for specific damages, external stimulation to trigger the healing process, and poor self-healing ability in the water, marine, or biological systems. There is a lack of fundamental understanding as well. This article comprehensively reviews self-healing superwetting surfaces, including their fabrication strategies, essential rules for materials design, and self-healing properties. Self-healing triggered by different external stimuli is summarized. The potential applications of self-healing superwetting surfaces are highlighted. This article consists of four main sections: (1) the functional surfaces with various superwetting properties, (2) natural self-healing superwetting surfaces (i.e., plants, insects, and creatures) and their healing mechanism, (3) recent research development in various self-healing superwetting surfaces, their preparation, wetting properties in the air or liquid media, and healing mechanism, and (4) the prospects including existing challenges, our views and potential solutions to the challenges, and future research directions.

Superhydrophilic–superhydrophobic patterned surfaces: From simplified fabrication to emerging applications

Superhydrophilic–superhydrophobic patterned surfaces constitute a branch of surface chemistry involving the two extreme states of superhydrophilicity and superhydrophobicity combined on the same surface in precise patterns. Such surfaces have many advantages, including controllable wettability, enrichment ability, accessibility, and the ability to manipulate and pattern water droplets, and they offer new functionalities and possibilities for a wide variety of emerging applications, such as microarrays, biomedical assays, microfluidics, and environmental protection. This review presents the basic theory, simplified fabrication, and emerging applications of superhydrophilic–superhydrophobic patterned surfaces. First, the fundamental theories of wettability that explain the spreading of a droplet on a solid surface are described. Then, the fabrication methods for preparing superhydrophilic–superhydrophobic patterned surfaces are introduced, and the emerging applications of such surfaces that are currently being explored are highlighted. Finally, the remaining challenges of constructing such surfaces and future applications that would benefit from their use are discussed.

Transparent Composite Films Showing Durable Antifogging and Repeatable Self-Healing Properties Based on an Integral Blend Method

Antifogging coatings for infrastructures and transparent objects have attracted much attention lately from the perspective of safety and visibility. We have developed a one-pot process to fabricate transparent composite films showing long-lasting antifogging and fast repeatable self-healing properties based on an integral blend (IB) method. This method does not require any specific pretreatments of inorganic fillers/particles. Thus, the precursor solutions could be prepared in a single step by simply mixing raw materials, e.g., poly(vinylpyrrolidone) (PVP) having different molecular weights (MWs: 55, 360, and 1300 k), nano-clay particles (NCPs), and amino-terminated organosilane (AOS). In this study, to control the degree of cross-linking between the PVP matrices and NCPs, addition of AOS as a cross-linker to the PVP matrices (weight percentage of AOS to the PVP matrices, α = 0.01-300%) was carefully controlled. Transparency and self-healing abilities/kinetics of the resulting samples were found to be strongly influenced by both the MWs of PVP and α values. Samples spin-coated with the lowest M_W of PVP (55 k) and α values of 0.01-1% gave highly transparent and durable antifogging performance. For example, no fogging was observed for 7 days under >80% relative humidity, and scratches about 30 μm in width could be completely self-healed within a few hours. However, samples with α > 10% gave opaque/grayish films that did not show any self-healing abilities because of an increase in cross-linking of the matrices. The optimized precursor solution was also deposited directly onto the glass slides covered with a transparent porous silica nano-framework (SNF) by a spray-coating method. Due to the formation of the hard and superhydrophilic/hygroscopic SNF with a large surface area, durability of antifogging and self-healing properties of the composite films were moderately improved, compared to those on the flat glass slides.

Environment friendly superhydrophobic and transparent surface coating via layer-by-layer self-assembly for antifogging of optical lenses

The fogging of the optical lenses seriously affects the life quality and safety, which is due to the gathering of the humid air into liquid droplets on the solid surface because of the temperature change. Superhydrophobic coating modification is an effective way to repel the water from surface. However, due to the specific application requirements, the transparency of optical lenses after coating modification is still the challenge for the application of such superhydrophobic coatings. In this work, a superhydrophobic and transparent surface coating was fabricated by the layer-by-layer self-assembly followed with fluorination. After poly(sodium 4-styrenesulfonate) and poly(allylamine hydrochloride) (PAH) multilayer precoating was generated on the surface, the different bilayers of SiO₂ nanoparticles in different particle sizes and PAH multilayers were fabricated. The obtained polyelectrolytes-nanoparticle multilayers were fluorinated by a fluorinating agent. Such polyelectrolytes-nanoparticle multilayered coating renders obvious micro-nano composite structure, showing excellent superhydrophilicity, whereas such coating modified eyeglasses keeps excellent light transparency. The results of antifogging and defogging test also proved that the eyeglass modified with this coating had good antifogging and defogging performance. Therefore, such polyelectrolytes-nanoparticle multilayered coating with excellent superhydrophobic and transparent properties might provide a feasible approach for the practical antifogging application of optical lenses.

Periodic Stratified Porous Structures in Dynamic Polyelectrolyte Films Through Standing-Wave Optical Crosslinking for Structural Color

Periodic porous structures have been introduced into functional films to meet the requirements of various applications. Though many approaches have been developed to generate desired structures in polymeric films, few of them can effectively and dynamically achieve periodic porous structures. Here, a facile way is proposed to introduce periodic stratified porous structures into polyelectrolyte films. A photo-crosslinkable polyelectrolyte film of poly(ethylenimine) (PEI) and photoreactive poly(acrylic acid) derivative (PAA-N3 ) is prepared by layer-by-layer (LbL) self-assembly. Stratified crosslinking of the PEI/PAA-N3 film is generated basing on standing-wave optics. The periodic stratified porous structure is constructed by forming pores in noncrosslinked regions in the film. Thanks to the dynamic mobility of polyelectrolytes, this structural controlment can be repeated several times. The size of pores corresponding to the layer spacing of the film contributes to the structural colors. Furthermore, structural color patterns are fabricated in the film by selective photo-crosslinking using photomasks. Although the large-scale structural controlment in thick (micron-scale and above) films needs to be explored further, this work highlights the periodic structural controlment in polymeric films and thus presents an approach for application potentials in sensor, detection, and ink-free printing.

Semi-interpenetrating polymer networks prepared from castor oil-based waterborne polyurethanes and carboxymethyl chitosan

A series of vegetable oil-based waterborne polyurethane composites were prepared through construction of novel semi-interpenetrating polymers network using carboxymethyl chitosan (CA) as the secondary polymer phase. The effects of CA contents on storage stability, and particle size distribution of the composite dispersions and thermal stability, mechanical properties and surface wettability of composite films were investigated and discussed. The results showed that the composite dispersions displayed excellent storage stability and the biomass contents of resulting films were high up to 80 %. A significant increase in crosslinking density and glass transition temperature of the composite films were observed as the CA contents increased, which was attributed to the increasing hard segment of films and strong hydrogen bonding interaction between polyurethanes and CA. This work provided a simple method to tailor the performance of environmentally friendly vegetable oil-based waterborne polyurethane, which could find application in the field of coatings, adhesives, ink and so on.

An antibacterial and biocompatible multilayer biomedical coating capable of healing damages

Besides the excellent biocompatibility and high antibacterial property, multifunctional biomedical coatings with a long service time is highly desirable for extended applications, which is still an ongoing challenge. The self-healing property enables new directions for effectively prolonging their service life and significantly improving their reliability. Herein, an efficient and simple method is used to facilely prepare antibacterial, biocompatibile multilayer polyelectrolyte coatings, which are capable of healing damages. The synthetic strategy involves the alternate deposition of Chitosan (CS) and sodium carboxymethyl cellulose (CMC) via the layer-by-layer (LBL) self-assembly technique. The CS/CMC multilayer polyelectrolyte coating features high antibacterial property, fast and efficient self-healing property, and excellent biocompatibility. These features allow the CS/CMC polyelectrolyte coating to have extended lifespan and to be highly promising for novel functional stent coating applications.

A CS/CMC multilayer polyelectrolyte coating was developed, which features fast and efficient self-healing property, high antibacterial property, and excellent biocompatibility.

Large-Scale Formation of Fluorosurfactant-Doped Transparent Nanocomposite Films Showing Durable Antifogging, Oil-Repellent, and Self-healing Properties

Transparent nanocomposite films with multiple functionalities, such as durable antifogging, dynamic oleophobic, self-healing properties, were successfully prepared by a simple spin- or spray-coating method using aqueous solutions of poly(vinylpyrrolidone) (PVP) and aminopropyl-functionalized nanoclay (AMP-clay) platelets. In this study, anionic/waterborne perfluorooctanesulfonic acid potassium salt (PFOS) was premixed with the aqueous PVP solution to achieve a homogeneous dispersion of PFOS. Due to the addition of PFOS, the resulting nanocomposite film surfaces displayed statically hydrophobic (static water contact angle over 90°) and dynamically oleophobic (5 μL of oil droplets could slide off of the surface at low sliding/substrate tilt angles of less than 10°) behaviors. In spite of our nanocomposite film surface exhibiting a statically hydrophobic nature, the antifogging properties remained unchanged even after being left under high-humidity conditions (over 80% relative humidity) for 3 days. Thanks to both exceptional water-absorbing properties of PVP/AMP-clay matrices and good mobility of PFOS driven by moisture, our oil-repellent nanocomposite films could be repeatedly self-healed even after both severe physical (cutting, scratching, or falling sand abrasion) and chemical (vacuum UV oxidation) damages. Large-scale fabrication of this multifunctional nanocomposite film (30 cm × 30 cm) could also be successfully demonstrated by a spray-coating method based on in situ gel formation.

Repeatedly Intrinsic Self-Healing of Millimeter-Scale Wounds in Polymer through Rapid Volume Expansion Aided Host-Guest Interaction

Implantable and wearable materials, which are usually used in/on a biological body, are mostly needed with biomimetic self-healing function. To enable repeatable large-wound self-healing and volume/structure recovery, we verified a proof-of-concept approach in this work. We design a polymer hydrogel that combines temperature responsiveness with an intrinsic self-healing ability through host-guest orthogonal self-assembly between two types of poly(N-isopropylacrylamide) (PNIPAM) oligomers. The result is thermosensitive, capable of fast self-repair of microcracks based on reversible host-guest assembly. More importantly, when a large open wound appears, the hydrogel can first close the wound via volume swelling and then completely self-repair the damage in terms of intrinsic self-healing. Meanwhile, its original volume can be easily recovered by subsequent contraction. As demonstrated by the experimental data, such millimeter-level wound self-healing and volume recovery can be repeatedly carried out in response to the short-term cooling stimulus. With low cytotoxicity and good biocompatibility, moreover, this highly intelligent hydrogel is greatly promising for practical large-wound self-healing in wound dressing, electronic skins, wearable biosensors, and humanoid robotics, which can tolerate large-scale human motions.

Micro-/Nanostructured Interface for Liquid Manipulation and Its Applications

Understanding the relationship between liquid manipulation and micro-/nanostructured interfaces has gained much attention due to the wide potential applications in many fields, such as chemical and biomedical assays, environmental protection, industry, and even daily life. Much work has been done to construct various materials with interfacial liquid manipulation abilities, leading to a range of interesting applications. Herein, different fabrication methods from the top-down approach to the bottom-up approach and subsequent surface modifications of micro-/nanostructured interfaces are first introduced. Then, interactions between the surface and liquid, including liquid wetting, liquid transportation, and a number of corresponding models, together with the definition of hydrophilic/hydrophobic, oleophilic/olephobic, the definition and mechanism of superwetting, including superhydrophobicity, superhydrophilicity, and superoleophobicity, are presented. The micro-/nanostructured interface, with major applications in self-cleaning, antifogging, anti-icing, anticorrosion, drag-reduction, oil-water separation, water collection, droplet (micro)array, and surface-directed liquid transport, is summarized, and the mechanisms underlying each application are discussed. Finally, the remaining challenges and future perspectives in this area are included.

Anti-Graffiti Behavior of Oleo/Hydrophobic Nano-Filled Coatings Applied on Natural Stone Materials

In recent years, graffiti writings are increasingly regarded as a form of art. However, their presence on historic building remains a vandalism and different strategies have been developed to clean or, preferably, protect the surfaces. In this study, an experimental nano-filled coating, based on fluorine resin containing SiO2 nano-particles, and two commercial products have been applied on compact and porous calcareous stones, representative of building materials used in the Mediterranean basin, and their anti-graffiti ability has been analyzed. All the tested experimental and commercial coatings exhibited high hydrophobicity and oleophobicity, thus meeting one of the basic requirements for anti-graffiti systems. The effects of staining by acrylic blu-colored spray paint and felt-tip marker were, then, assessed; the properties of the treated stone surfaces after cleaning by acetone were also investigated. Visual observations, contact angle measurements and color evaluations were performed to this aim. It was found that the protective coatings facilitated the spray paint removal; however high oleophobicity or paint repellence did not guarantee a complete cleaning. The stain from the felt-tip marker was confirmed to be extremely difficult to remove. The cleaning with a neat unconfined solvent promoted the movement of the applied polymers (and likely of the paint, as well) in the porous structure of the stone substrate.

Transparent and Scratch-Resistant Antifogging Coatings with Rapid Self-Healing Capability

Typical antifogging coatings based on hydrophilic polymers are soft and susceptible to mechanical damage. In this paper, an antifogging coating that is both scratch-resistant and self-healing is fabricated by copolymerizing sulfobetaine methacrylate and 2-hydroxyethyl methacrylate in the presence of sulfobetaine-modified silica nanoparticles in one pot. The coating is highly efficient in preventing fog formation at the surface and reducing ice adhesion, and is resistant to fouling by oil and protein, due to the strong hydration ability of the zwitterionic moieties. The composite coating is resistant to scratching and abrasion under normal use conditions to maintain its transparency due to increased hardness by the filled silica nanoparticles and is able to heal completely within several minutes severe scratches and cuts inflicted in harsh conditions, owing to the water-assisted reversibility of the electrostatic and hydrogen-bonding interactions holding together the polymer components and the silica nanoparticles. The multiple desirable properties demonstrated and the simple fabrication process of the coating offers great potential in many practical applications.

Bioinspired Multifunctional Protein Coating for Antifogging, Self-Cleaning, and Antimicrobial Properties

A multifunctional coating with antifogging, self-cleaning, and antimicrobial properties has been prepared based on a mussel-inspired chimeric protein MP-KE, which is the first example that these proteins were successfully applied to fabricate antifogging surfaces. The coating exhibits super hydrophilic properties, as indicated by contact angles less than 5° and high light transmittance similar to bare glass substrates about 90%. The zwitterionic peptides of MP-KE empower water molecules to expand into thin hydrated films rapidly, providing the protein coating with diverse surface functions. Moreover, the coatings have excellent stability and a convenient preparation process because of the mussel adhesive motif of MP-KE which makes the coating anchor onto the surface strongly. As a protein material, this multifunctional coating possesses remarkable biocompatibility and has a potential application prospects in the biomedical and pharmaceutical fields.

Recent advances of bioinspired functional materials with specific wettability: from nature and beyond nature

Through 3.7 billion years of evolution and natural selection, plants and animals in nature have ingeniously fulfilled a broad range of fascinating functions to achieve optimized performance in responding and adapting to changes in the process of interacting with complex natural environments. It is clear that the hierarchically organized micro/nanostructures of the surfaces of living organisms decisively manage fascinating and amazing functions, regardless of the chemical components of their building blocks. This conclusion now allows us to elucidate the underlying mechanisms whereby these hierarchical structures have a great impact on the properties of the bulk material. In this review, we mainly focus on advances over the last three years in bioinspired multiscale functional materials with specific wettability. Starting from selected naturally occurring surfaces, manmade bioinspired surfaces with specific wettability are introduced, with an emphasis on the cooperation between structural characteristics and macroscopic properties, including lotus leaf-inspired superhydrophobic surfaces, fish scale-inspired superhydrophilic/underwater superoleophobic surfaces, springtail-inspired superoleophobic surfaces, and Nepenthes (pitcher plant)-inspired slippery liquid-infused porous surfaces (SLIPSs), as well as other multifunctional surfaces that combine specific wettability with mechanical properties, optical properties and the unidirectional transport of liquid droplets. Afterwards, various top-down and bottom-up fabrication techniques are presented, as well as emerging cutting-edge applications. Finally, our personal perspectives and conclusions with regard to the transfer of micro- and nanostructures to engineered materials are provided.

Water drop-surface interactions as the basis for the design of anti-fogging surfaces: Theory, practice, and applications trends

Glass- and polymer-based materials have become essential in the fabrication of a multitude of elements, including eyeglasses, automobile windshields, bathroom mirrors, greenhouses, and food packages, which unfortunately mist up under typical operating conditions. Far from being an innocuous phenomenon, the formation of minute water drops on the surface is detrimental to their optical properties (e.g., light-transmitting capability) and, in many cases, results in esthetical, hygienic, and safety concerns. In this context, it is therefore not surprising that research in the field of fog-resistant surfaces is gaining in popularity, particularly in recent years, in view of the growing number of studies focusing on this topic. This review addresses the most relevant advances released thus far on anti-fogging surfaces, with a particular focus on coating deposition, surface micro/nanostructuring, and surface functionalization. A brief explanation of how surfaces fog up and the main issues of interest linked to fogging phenomenon, including common problems, anti-fogging strategies, and wetting states are first presented. Anti-fogging mechanisms are then discussed in terms of the morphology of water drops, continuing with a description of the main fabrication techniques toward anti-fogging property. This review concludes with the current and the future perspectives on the utility of anti-fogging surfaces for several applications and some remaining challenges in this field.

A Bioinspired, Highly Transparent Surface with Dry-Style Antifogging, Antifrosting, Antifouling, and Moisture Self-Cleaning Properties

Transparent coatings with antireflection, antifogging, antifrosting, antifouling, and moisture self-cleaning properties can dramatically improve the efficiency and convenience of optical elements and thus are highly desirable for practical applications. Here, it is demonstrated that a bionic nanocone surface (BNS) fabricated by a facile, low-cost process consisting of template-assisted prepolymer curing followed by surface modification can possess the multiple functions listed above. The polymer coating firmly adheres to a glass substrate due to bonding agents. After SiO₂ nanoparticle deposition and low-surface-energy fluorosilane modification, the coating shows low microdroplet adhesion. As a result, the as-prepared BNS exhibits a high transmittance when exposed to fog and good clarity even when the temperature decreases to -20 °C in a humid environment. Dipping the BNS into exemplified graphite powder has almost no influence on the transparency, and the BNS can realize self-cleaning of moisture when the surface is covered with a thick layer of man-made contaminants.

Transparent Polymeric Films Capable of Healing Millimeter-Scale Cuts

Transparent polymeric films have been successfully integrated with self-healing capabilities. However, these films can only heal damages in the scale of several to several tens of micrometers, thereby greatly limiting their practical applications. The present study reports the fabrication of transparent polymeric films capable of healing millimeter-scale cuts by incorporating hydrogen-bonding units into zwitterionic polymer films, which are cross-linked by electrostatic interactions. The intermolecular interactions in the resulting films are greatly reduced when the films absorb water as a result of the reversibility of hydrogen-bonding and electrostatic interactions, thereby promoting the flowability of the film materials. Thus, the transparent films can heal 7.9 mm wide cuts and recover their damaged transparency following exposure to water. Furthermore, owing to their strong binding affinity to water molecules, the healable transparent films can effectively clean up oil fouled on dry films following rinsing with water. The combination of hydrogen bonding and electrostatic interactions provides a new means of design for transparent films with enhanced healing capabilities and an extended service life.

Healability Demonstrates Enhanced Shape-Recovery of Graphene-Oxide-Reinforced Shape-Memory Polymeric Films

The fabrication of shape-memory polymers or films that can simultaneously heal the mechanical damage and the fatigued shape-memory function remains challenging. In this study, mechanically robust healable shape-memory polymeric films that can heal the mechanical damage and the fatigued shape-memory function in the presence of water are fabricated by layer-by-layer assembly of branched poly(ethylenimine) (bPEI)-graphene oxide (GO) complexes with poly(acrylic acid) (PAA), followed by the release of the (PAA/bPEI-GO)*n films from the underlying substrates. The free-standing (PAA/bPEI-GO_0.02)*35 films made of bPEI-GO complexes with a mass ratio of 0.02 between GO nanosheets and bPEI are mechanically robust with a Young's modulus of 19.8 ± 2.1 GPa and a hardness of 0.92 ± 0.15 GPa and exhibit excellent humidity-induced healing and shape-memory functions. Benefiting from the highly efficient healing function, the (PAA/bPEI-GO_0.02)*35 films can heal cuts penetrating thorough the entire film and achieve an ∼100% shape-recovery ratio for a long-term shape-memory application. Meanwhile, the shape-memory function of the mechanically damaged (PAA/bPEI-GO_0.02)*35 films can be finely restored after being healed in water. The shape-memory functions of the (PAA/bPEI-GO_0.02)*35 films and their healing capacity originate from the reversibility of electrostatic and hydrogen-bonding interactions induced by water between PAA and bPEI-GO complexes.

Bio-inspired antifogging PDMS coupled micro-pillared superhydrophobic arrays and SiO2 coatings

Inspired by nature, a bio-inspired antifogging PDMS is designed and fabricated successfully using UV lithography and a template method. It achieves an excellent superhydrophobic antifogging property, which benefits from a coupling effect.