Bioinspired Ultralight Inorganic Aerogel for Highly Efficient Air Filtration and Oil-Water Separation

Editorial for the Special Issue "Gels for Removal and Adsorption (2nd Edition)"

Gel materials, especially hydrogels and aerogels, have been materials of interest in adsorption technology research in recent years [...].

Conjugated Microporous Polymer Aerogels Encapsulated within Hydroxyapatite Nanowires Exhibit Good Thermal Insulation and Flame-Retardant Properties

Aerogels have been widely studied in the field of thermal insulation. Herein, we reported a kind of conjugated micropolymer (CMP) aerogel synthesized by 1,3,5-triethynylbenzene and 2-amino-3,5-dibromopyridine. To enhance the flame-retardant property, we composited hydroxyapatite (HAP) nanowires with a CMP aerogel. Transmission electron microscopy (TEM) analysis revealed that HAP nanowires were encapsulated within nanosized CMP tubes. In addition, the thermal conductivity of HAP2-NCMP aerogel was 0.0251 W m-1 K-1, which possesses good thermal insulation property. In the micro-combustion calorimeter (MCC) test, compared with pure NCMP, the peak heat release rate (pHRR) of HAP2-NCMP decreased from 39.3 to 30.82 W g-1, approximately 21.6% lower. Furthermore, with the increased addition of hydroxyapatite in the HAP-NCMP composite, the pHRR of HAP3-NCMP decreased by about 37.4%. Besides, NCMP possesses good mechanical properties, with a compressive strength of 117.3 kPa at a strain level of 60%. These findings suggest promising application potential for HAP-NCMP in energy-saving and flame-retardant applications.

Metal-Phenolic Networks-Reinforced Extracellular Matrix Scaffold for Bone Regeneration via Combining Radical-Scavenging and Photo-Responsive Regulation of Microenvironment

The limited regulation strategies of the regeneration microenvironment significantly hinder bone defect repair effectiveness. One potential solution is using biomaterials capable of releasing bioactive ions and biomolecules. However, most existing biomaterials lack real-time control features, failing to meet high regulation requirements. Herein, a new Strontium (Sr) and epigallocatechin-3-gallate (EGCG) based metal-phenolic network with polydopamine (PMPNs) modification is prepared. This material reinforces a biomimetic scaffold made of extracellular matrix (ECM) and hydroxyapatite nanowires (nHAW). The PMPNs@ECM/nHAW scaffold demonstrates exceptional scavenging of free radicals and reactive oxygen species (ROS), promoting HUVECs cell migration and angiogenesis, inducing stem cell osteogenic differentiation, and displaying high biocompatibility. Additionally, the PMPNs exhibit excellent photothermal properties, further enhancing the scaffold's bioactivities. In vivo studies confirm that PMPNs@ECM/nHAW with near-infrared (NIR) stimulation significantly promotes angiogenesis and osteogenesis, effectively regulating the microenvironment and facilitating bone tissue repair. This research not only provides a biomimetic scaffold for bone regeneration but also introduces a novel strategy for designing advanced biomaterials. The combination of real-time photothermal intervention and long-term chemical intervention, achieved through the release of bioactive molecules/ions, represents a promising direction for future biomaterial development.

Guidelines derived from biomineralized tissues for design and construction of high-performance biomimetic materials: from weak to strong

Living organisms in nature have undergone continuous evolution over billions of years, resulting in the formation of high-performance fracture-resistant biomineralized tissues such as bones and teeth to fulfill mechanical and biological functions, despite the fact that most inorganic biominerals that constitute biomineralized tissues are weak and brittle. During the long-period evolution process, nature has evolved a number of highly effective and smart strategies to design chemical compositions and structures of biomineralized tissues to enable superior properties and to adapt to surrounding environments. Most biomineralized tissues have hierarchically ordered structures consisting of very small building blocks on the nanometer scale (nanoparticles, nanofibers or nanoflakes) to reduce the inherent weaknesses and brittleness of corresponding inorganic biominerals, to prevent crack initiation and propagation, and to allow high defect tolerance. The bioinspired principles derived from biomineralized tissues are indispensable for designing and constructing high-performance biomimetic materials. In recent years, a large number of high-performance biomimetic materials have been prepared based on these bioinspired principles with a large volume of literature covering this topic. Therefore, a timely and comprehensive review on this hot topic is highly important and contributes to the future development of this rapidly evolving research field. This review article aims to be comprehensive, authoritative, and critical with wide general interest to the science community, summarizing recent advances in revealing the formation processes, composition, and structures of biomineralized tissues, providing in-depth insights into guidelines derived from biomineralized tissues for the design and construction of high-performance biomimetic materials, and discussing recent progress, current research trends, key problems, future main research directions and challenges, and future perspectives in this exciting and rapidly evolving research field.

Hydroxyapatite and its composite in heavy metal decontamination: Adsorption mechanisms, challenges, and future perspective

Nanohydroxyapatite (n-HAP), recognized by its peculiar crystal architecture and distinctive attributes showcased the underlying potential in adsorbing heavy metal ions (HMI). In this paper, the intrinsic mechanism of HMI adsorption by n-HAP was first revealed. Subsequently, the selectivity and competitiveness of n-HAP for HMI in a variety of environments containing various interferences from cations, anions, and organic molecules are elucidated. Next, n-HAP was further categorized according to its morphological dimensions, and its adsorption properties and intrinsic mechanisms were investigated based on these different morphologies. It was shown that although n-HAP has excellent adsorption capacity and cost-effectiveness, its application is often challenging to realize due to its inherent fragility and agglomeration, the technical problems required for its handling, and the difficulty of recycling. Finally, to address these issues, this paper discusses the tendency of n-HAP and its hybridized/modified materials to adsorb HMI as well as the limitations of their applications. By summarizing the limitations and future directions of hybridization/modification HAP in the field of HMI contamination abatement, this paper provides insightful perspectives for its gradual improvement and rational application.

Bioactive Hydroxyapatite Aerogels with Piezoelectric Particles

Open-cell foams based on hydroxyapatite (HAp) can mimic the extracellular matrix (ECM) to better replace damaged hard tissues and assist in their regeneration processes. Aerogels of HAp nanowires (NW) with barium titanate (BT) particles were produced and characterized regarding their physical and chemical properties, bioactivity, and in vitro cytotoxicity. Considering the role of piezoelectricity (mainly due to collagen) and surface charges in bone remodeling, all BT particles, of size 280 nm and 2 and 3 µm, contained BaTiO3 in their piezoelectric tetragonal phase. The synthesized nanowires were verified to be AB-type carbonated hydroxyapatite. The aerogels showed high porosity and relatively homogeneous distribution of the BT particles. Barium titanate proved to be non-cytotoxic while all the aerogels produced were cytotoxic for an extract concentration of 1 mg/mL but became non-cytotoxic at concentrations of 0.5 mg/mL and below. It is possible that these results were affected by the higher surface area and quicker dissolution rate of the aerogels. In the bioactivity assays, SEM/EDS, it was not easy to differentiate between the apatite deposition and the surface of the HAp wires. However, a quantitative EDS analysis shows a possible CaP deposition/dissolution cycle taking place.

Advanced Synthetic Scaffolds Based on 1D Inorganic Micro-/Nanomaterials for Bone Regeneration

Inorganic nanoparticulate biomaterials, such as calcium phosphate and bioglass particles, with chemical compositions similar to that of the inorganic component of natural bone, and hence having excellent biocompatibility and bioactivity, are widely used for the fabrication of synthetic bone graft substitutes. Growing evidence suggests that structurally anisotropic, or 1D inorganic micro-/nanobiomaterials are superior to inorganic nanoparticulate biomaterials in the context of mechanical reinforcement and construction of self-supporting 3D network structures. Therefore, in the past decades, efforts have been devoted to developing advanced synthetic scaffolds for bone regeneration using 1D micro-/nanobiomaterials as building blocks. These scaffolds feature extraordinary physical and biological properties, such as enhanced mechanical properties, super elasticity, multiscale hierarchical architecture, extracellular matrix-like fibrous microstructure, and desirable biocompatibility and bioactivity, etc. In this review, an overview of recent progress in the development of advanced scaffolds for bone regeneration is provided based on 1D inorganic micro-/nanobiomaterials with a focus on their structural design, mechanical properties, and bioactivity. The promising perspectives for future research directions are also highlighted.

Highly Efficient Fabrication of Biomimetic Nanoscaled Tendrils for High-Performance PM0.3 Air Filters

Particulate matter pollution has become a serious public health issue, especially with the outbreak of new infectious diseases. However, most existing air filtration materials face challenges such as being too bulky, having high resistance, and a trade-off between filtration efficiency and air permeability. Here, a unique electro-blown spinning technique is used to prepare an air filter made of biomimetic nanoscaled tendril nonwovens (Nano-TN). The introduction of an airflow field significantly increases the whipping frequency and the strain mismatch of composite jets, achieving large-scale and highly efficient preparation of Nano-TN. The resultant Nano-TN has an ultrahigh porosity (97%) and a small pore size (2.9 μm). At the same filtration level, its air resistance is 37% lower than that of traditional straight nanofibrous nonwovens and has a higher dust-holding capacity. Moreover, compared with traditional three-dimensional air filters, the Nano-TN filter is thinner, offering tremendous application prospects in various environmental purification and personal protection fields.

Hybrid and Single-Component Flexible Aerogels for Biomedical Applications: A Review

The inherent disadvantages of traditional non-flexible aerogels, such as high fragility and moisture sensitivity, severely restrict their applications. To address these issues and make the aerogels efficient, especially for advanced medical applications, different techniques have been used to incorporate flexibility in aerogel materials. In recent years, a great boom in flexible aerogels has been observed, which has enabled them to be used in high-tech biomedical applications. The current study comprises a comprehensive review of the preparation techniques of pure polymeric-based hybrid and single-component aerogels and their use in biomedical applications. The biomedical applications of these hybrid aerogels will also be reviewed and discussed, where the flexible polymeric components in the aerogels provide the main contribution. The combination of highly controlled porosity, large internal surfaces, flexibility, and the ability to conform into 3D interconnected structures support versatile properties, which are required for numerous potential medical applications such as tissue engineering; drug delivery reservoir systems; biomedical implants like heart stents, pacemakers, and artificial heart valves; disease diagnosis; and the development of antibacterial materials. The present review also explores the different mechanical, chemical, and physical properties in numerical values, which are most wanted for the fabrication of different materials used in the biomedical fields.

High-aspect-ratio nanostructured hydroxyapatite: towards new functionalities for a classical material

Hydroxyapatite-based materials have been widely used in countless applications, such as bone regeneration, catalysis, air and water purification or protein separation. Recently, much interest has been given to controlling the aspect ratio of hydroxyapatite crystals from bulk samples. The ability to exert control over the aspect ratio may revolutionize the applications of these materials towards new functional materials. Controlling the shape, size and orientation of HA crystals allows obtaining high aspect ratio structures, improving several key properties of HA materials such as molecule adsorption, ion exchange, catalytic reactions, and even overcoming the well-known brittleness of ceramic materials. Regulating the morphogenesis of HA crystals to form elongated oriented fibres has led to flexible inorganic synthetic sponges, aerogels, membranes, papers, among others, with applications in sustainability, energy and catalysis, and especially in the biomedical field.

Green synthesis of metal-organic framework loaded dexamethasone on wood aerogels for enhanced cranial bone regeneration

Bone defects have attracted increasing attention in clinical settings. To date, there have been no effective methods to repair defective bones. Balsa wood aerogels are considered as an excellent source of chemicals for chemical modification to facilitate the in situ immobilization of zeolitic imidazolate framework-8. Furthermore, dexamethasone has received considerable attention for bone tissue engineering. In this study, for the first time, a simple but effective one-pot method for developing a novel zeolitic imidazolate framework-8 with different concentrations of dexamethasone was developed. These findings illustrate that the novel scaffold has a significant positive impact on osteogenic differentiation in vitro and repairs defects in vivo, suggesting that it can be used in bone tissue engineering.

Aerogel-Based Biomaterials for Biomedical Applications: From Fabrication Methods to Disease-Targeting Applications

Aerogel-based biomaterials are increasingly being considered for biomedical applications due to their unique properties such as high porosity, hierarchical porous network, and large specific pore surface area. Depending on the pore size of the aerogel, biological effects such as cell adhesion, fluid absorption, oxygen permeability, and metabolite exchange can be altered. Based on the diverse potential of aerogels in biomedical applications, this paper provides a comprehensive review of fabrication processes including sol-gel, aging, drying, and self-assembly along with the materials that can be used to form aerogels. In addition to the technology utilizing aerogel itself, it also provides insight into the applicability of aerogel based on additive manufacturing technology. To this end, how microfluidic-based technologies and 3D printing can be combined with aerogel-based materials for biomedical applications is discussed. Furthermore, previously reported examples of aerogels for regenerative medicine and biomedical applications are thoroughly reviewed. A wide range of applications with aerogels including wound healing, drug delivery, tissue engineering, and diagnostics are demonstrated. Finally, the prospects for aerogel-based biomedical applications are presented. The understanding of the fabrication, modification, and applicability of aerogels through this study is expected to shed light on the biomedical utilization of aerogels.

Bioelectret poly(lactic acid) membranes with simultaneously enhanced physical interception and electrostatic adsorption of airborne PM0.3

Traditional polymeric fibrous membranes have been extensively used to reduce the health risks caused by airborne particulate matter (PM), leading to the dramatically increasing pollution of plastics and microplastics. Although great efforts have been made to develop poly(lactic acid) (PLA)-based membrane filters, they are frequently dwarfed by their relatively poor electret properties and electrostatic adsorptive mechanisms. To resolve this dilemma, a bioelectret approach was proposed in this work, strategically involving the bioinspired adhesion of dielectric hydroxyapatite nanowhiskers as a biodegradable electret to promote the polarization properties of PLA microfibrous membranes. In addition to significant improvements in tensile properties, the incorporation of hydroxyapatite bioelectret (HABE) enabled remarkable increase in the removal efficiencies of ultrafine PM_0.3 in a high-voltage electrostatic field (10 and 25 kV). This was exemplified by the largely increased filtering performance (69.75%, 23.1 Pa) for PLA membranes loaded with 10 wt% HABE at the normal airflow rate (32 L/min) compared to the pristine PLA counterpart (32.89%, 7.2 Pa). Although the filtration efficiency of PM_0.3 for the counterpart dramatically decreased to 21.6% at 85 L/min, the increment was maintained at nearly 196% for the bioelectret PLA, while an ultralow pressure drop (74.5 Pa) and high humidity resistance (RH 80%) were achieved. The unusual property combination were ascribed to the HABE-enabled realization of multiple filtration mechanisms, including the simultaneous enhancement of physical interception and electrostatic adsorption. The significant filtration applications, unattainable with conventional electret membranes, demonstrate the bioelectret PLA as a promising biodegradable platform that allows high filtration properties and humidity resistance.

Preparation of Nanocellulose-Based Aerogel and Its Research Progress in Wastewater Treatment

Nowadays, the fast expansion of the economy and industry results in a considerable volume of wastewater being released, severely affecting water quality and the environment. It has a significant influence on the biological environment, both terrestrial and aquatic plant and animal life, and human health. Therefore, wastewater treatment is a global issue of great concern. Nanocellulose's hydrophilicity, easy surface modification, rich functional groups, and biocompatibility make it a candidate material for the preparation of aerogels. The third generation of aerogel is a nanocellulose-based aerogel. It has unique advantages such as a high specific surface area, a three-dimensional structure, is biodegradable, has a low density, has high porosity, and is renewable. It has the opportunity to replace traditional adsorbents (activated carbon, activated zeolite, etc.). This paper reviews the fabrication of nanocellulose-based aerogels. The preparation process is divided into four main steps: the preparation of nanocellulose, gelation of nanocellulose, solvent replacement of nanocellulose wet gel, and drying of nanocellulose wet aerogel. Furthermore, the research progress of the application of nanocellulose-based aerogels in the adsorption of dyes, heavy metal ions, antibiotics, organic solvents, and oil-water separation is reviewed. Finally, the development prospects and future challenges of nanocellulose-based aerogels are discussed.

Emerging Trends in Nanotechnology: Aerogel-Based Materials for Biomedical Applications

At present, aerogel is one of the most interesting materials globally. The network of aerogel consists of pores with nanometer widths, which leads to a variety of functional properties and broad applications. Aerogel is categorized as inorganic, organic, carbon, and biopolymers, and can be modified by the addition of advanced materials and nanofillers. Herein, this review critically discusses the basic preparation of aerogel from the sol-gel reaction with derivation and modification of a standard method to produce various aerogels for diverse functionalities. In addition, the biocompatibility of various types of aerogels were elaborated. Then, biomedical applications of aerogel were focused on this review as a drug delivery carrier, wound healing agent, antioxidant, anti-toxicity, bone regenerative, cartilage tissue activities and in dental fields. The clinical status of aerogel in the biomedical sector is shown to be similarly far from adequate. Moreover, due to their remarkable properties, aerogels are found to be preferably used as tissue scaffolds and drug delivery systems. The advanced studies in areas including self-healing, additive manufacturing (AM) technology, toxicity, and fluorescent-based aerogel are crucially important and are further addressed.

Fabrication and Applications of Ceramic-Based Nanofiber Materials Service in High-Temperature Harsh Conditions—A Review

Ceramic-based nanofiber materials have attracted attention due to their high-temperature resistance, oxidation resistance, chemical stability, and excellent mechanical performance, such as flexibility, tensile, and compression, which endow them with promising application prospects for filtration, water treatment, sound insulation, thermal insulation, etc. According to the above advantages, we, therefore, reviewed the ceramic-based nanofiber materials from the perspectives of components, microstructure, and applications to provide a systematical introduction to ceramic-based nanofiber materials as so-called blankets or aerogels, as well as their applications for thermal insulation, catalysis, and water treatment. We hope that this review will provide some necessary suggestions for further research on ceramic-based nanomaterials.

Aerogels based on cationically modified chitosan and poly(vinyl alcohol) for efficient capturing of viruses

In this study, we developed a new filtering bioaerogel based on linear polyvinyl alcohol (PVA) and the cationic derivative of chitosan (N-[(2-hydroxy-3-trimethylamine) propyl] chitosan chloride, HTCC) with a potential antiviral application. A strong intermolecular network architecture was formed thanks to the introduction of linear PVA chains, which can efficiently interpenetrate the glutaraldehyde(GA)-crosslinked HTCC chains. The morphology of the obtained structures was examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The aerogels and modified polymers' elemental composition (including the chemical environment) was determined using X-ray photoelectron spectroscopy (XPS). New aerogels with more than twice as much developed micro- and mesopore space and BET-specific surface area were obtained concerning the starting sample chitosan aerogel crosslinked by glutaraldehyde (Chit/GA). The results obtained from the XPS analysis showed the presence of cationic 3-trimethylammonium groups on the surface of the aerogel, which can interact with viral capsid proteins. No cytotoxic effect of HTCC/GA/PVA aerogel was also observed on fibroblast cells of the NIH3T3 line. Furthermore, the HTCC/GA/PVA aerogel has been shown that efficiently traps mouse hepatitis virus (MHV) from suspension. The presented concept of aerogel filters for virus capture based on modified chitosan and polyvinyl alcohol has a high application potential.

Flexible-in-rigid polycrystalline titanium nanofibers: a toughening strategy from a macro-scale to a molecular-scale

TiO₂ nanomaterials, especially one-dimensional TiO₂ nanofibers fabricated by electrospinning, have received considerable attention in the past two decades, for a variety of basic applications. However, their safe use and easy recycling are still hampered by the inherently subpar mechanical performance. Here, we toughened polycrystalline TiO₂ nanofibers by introducing Al³⁺-species at the very beginning of electrospinning. The resultant long-and-continuous TiO₂ nanofibers achieved a Young's modulus of 653.8 MPa, which is ca. 25-fold higher than that of conventional TiO₂ nanofibers. Within each nanofiber, amorphous Al₂O₃-based oxide effectively hindered the coalescence of TiO₂ nanocrystals and potentially repaired the surface groves. The solid-state ¹⁷O-NMR spectra further revealed the toughening strategy on a molecular scale, where relatively flexible Ti-O-Al bonds replaced rigid O-Ti-O bonds at the interfaces of TiO₂ and Al₂O₃. Moreover, the modified TiO₂ nanofibers exhibited superb sinter-resistance, without cracking over 900 °C, which was dynamically monitored by TEM. Therefore, flexible-in-rigid TiO₂ fibrous mats can be facilely folded into 3D sponges through origami art. As a potential showcase, the TiO₂ sponges were demonstrated as a duarable and renewable filtrator with a high filtration efficiency of 99.97% toward PM_2.5 and 99.99% toward PM₁₀ after working for 300 min. This work provides a rational strategy to produce flexible oxide nanofibers and gives an in-depth understanding of the toughening mechanism from the macro-scale to the molecular-scale.

Thermal Insulation and Flame Retardancy of the Hydroxyapatite Nanorods/Sodium Alginate Composite Aerogel with a Double-Crosslinked Structure

As advanced thermal management materials, aerogels have great research value in the fields of engineering insulation, pipeline transportation, and packaging insulation. The composite interaction of the two-phase interface and the construction of a porous structure have an important impact on the thermal properties. Herein, a novel HANRs/SAB composite aerogel was prepared using sodium alginate (SA) with hydroxyapatite nanorods (HANRs), combined with boric acid crosslinking and freeze drying. In the prepared sample, the calcium ions in HANRs and SA formed the first layer of binding force and the chemical crosslinking of sodium alginate with boric acid formed the second layer of strong binding force, which effectively supported the skeleton of the aerogel and enhanced the overall mechanical properties. The modulus and maximum compressive strength of the obtained HANRs/SAB aerogel were 2.39 and 0.75 MPa, respectively, while the bulk density was 0.038-0.068 g·cm^-3. Based on the prominent physical structure, the as-prepared HANRs/SAB aerogel exhibited good thermal insulation (∼35.15 mW·m^-1·K^-1) and outstanding flame retardant performance. Flame-retardant boric acid and high-thermal stability HANRs could effectively prevent heat transfer and organic combustion, thus resulting in an extremely low smoke gas release (11.3 m² m^-2). Therefore, the low-cost biopolymer composite aerogel based on a crosslinking strategy has broad application prospects in the field of thermal insulation and flame retardancy.

Calcium Orthophosphate (CaPO4)-Based Bioceramics: Preparation, Properties, and Applications

Various types of materials have been traditionally used to restore damaged bones. In the late 1960s, a strong interest was raised in studying ceramics as potential bone grafts due to their biomechanical properties. A short time later, such synthetic biomaterials were called bioceramics. Bioceramics can be prepared from diverse inorganic substances, but this review is limited to calcium orthophosphate (CaPO4)-based formulations only, due to its chemical similarity to mammalian bones and teeth. During the past 50 years, there have been a number of important achievements in this field. Namely, after the initial development of bioceramics that was just tolerated in the physiological environment, an emphasis was shifted towards the formulations able to form direct chemical bonds with the adjacent bones. Afterwards, by the structural and compositional controls, it became possible to choose whether the CaPO4-based implants would remain biologically stable once incorporated into the skeletal structure or whether they would be resorbed over time. At the turn of the millennium, a new concept of regenerative bioceramics was developed, and such formulations became an integrated part of the tissue engineering approach. Now, CaPO4-based scaffolds are designed to induce bone formation and vascularization. These scaffolds are usually porous and harbor various biomolecules and/or cells. Therefore, current biomedical applications of CaPO4-based bioceramics include artificial bone grafts, bone augmentations, maxillofacial reconstruction, spinal fusion, and periodontal disease repairs, as well as bone fillers after tumor surgery. Prospective future applications comprise drug delivery and tissue engineering purposes because CaPO4 appear to be promising carriers of growth factors, bioactive peptides, and various types of cells.

Magnetically responsive nanofibrous ceramic scaffolds for on-demand motion and drug delivery

Smart biomaterials, featuring not only bioactivity, but also dynamic responsiveness to external stimuli, are desired for biomedical applications, such as regenerative medicine, and hold great potential to expand the boundaries of the modern clinical practice. Herein, a magnetically responsive three-dimensional scaffold with sandwich structure is developed by using hydroxyapatite (HA) nanowires and ferrosoferric oxide (Fe3O4) nanoparticles as building blocks. The magnetic HA/Fe3O4 scaffold is fully inorganic in nature, but shows polymeric hydrogel-like characteristics including a 3D fibrous network that is highly porous (>99.7% free volume), deformable (50% deformation) and elastic, and tunable stiffness. The magnetic HA/Fe3O4 scaffold has been shown to execute multimodal motion upon exposure to an external magnetic field including shape transformation, rolling and somersault. In addition, we have demonstrated that the magnetic scaffold can serve as a smart carrier for remotely controlled, on-demand delivery of compounds including an organic dye and a protein. Finally, the magnetic scaffold has exhibited good biocompatibility, supporting the attachment and proliferation of human mesenchymal stromal cells, thereby showing great potential as smart biomaterials for a variety of biomedical applications.

Supercritical Fluid Technologies for the Incorporation of Synthetic and Natural Active Compounds into Materials for Drug Formulation and Delivery

Various active compounds isolated from natural sources exhibit remarkable benefits, making them attractive for pharmaceutical and biomedical applications, such as antioxidant, antimicrobial, and anti-inflammatory activities, which contribute to the treatment of cardiovascular diseases, neurodegenerative disorders, various types of cancer, diabetes, and obesity. However, their major drawbacks are their reactivity, instability, relatively poor water solubility, and consequently low bioavailability. Synthetic drugs often face similar challenges associated with inadequate solubility or burst release in gastrointestinal media, despite being otherwise a safe and effective option for the treatment of numerous diseases. Therefore, drug-eluting pharmaceutical formulations have been of great importance over the years in efforts to improve the bioavailability of active compounds by increasing their solubility and achieving their controlled release in body media. This review highlights the success of the fabrication of micro- and nanoformulations using environmentally friendly supercritical fluid technologies for the processing and incorporation of active compounds. Several novel approaches, namely micronization to produce micro- and nano-sized particles, supercritical drying to produce aerogels, supercritical foaming, and supercritical solvent impregnation, are described in detail, along with the currently available drug delivery data for these formulations.

Tailorable Nanoporous Hydroxyapatite Scaffolds for Electrothermal Catalysis

Polarized hydroxyapatite (HAp) scaffolds with customized architecture at the nanoscale have been presented as a green alternative to conventional catalysts used for carbon and dinitrogen fixation. HAp printable inks with controlled nanoporosity and rheological properties have been successfully achieved by incorporating Pluronic hydrogel. Nanoporous scaffolds with good mechanical properties, as demonstrated by means of the nanoindentation technique, have been obtained by a sintering treatment and the posterior thermally induced polarization process. Their catalytic activity has been evaluated by considering three different key reactions (all in the presence of liquid water): (1) the synthesis of amino acids from gas mixtures of N₂, CO₂, and CH₄; (2) the production of ethanol from gas mixtures of CO₂ and CH₄; and (3) the synthesis of ammonia from N₂ gas. Comparison of the yields obtained by using nanoporous and nonporous (conventional) polarized HAp catalysts shows that both the nanoporosity and water absorption capacity of the former represent a drawback when the catalytic reaction requires auxiliary coating layers, as for example for the production of amino acids. This is because the surface nanopores achieved by incorporating Pluronic hydrogel are completely hindered by such auxiliary coating layers. On the contrary, the catalytic activity improves drastically for reactions in which the HAp-based scaffolds with enhanced nanoporosity are used as catalysts. More specifically, the carbon fixation from CO₂ and CH₄ to yield ethanol improves by more than 3000% when compared with nonporous HAp catalyst. Similarly, the synthesis of ammonia by dinitrogen fixation increases by more than 2000%. Therefore, HAp catalysts based on nanoporous scaffolds exhibit an extraordinary potential for scalability and industrial utilization for many chemical reactions, enabling a feasible green chemistry alternative to catalysts based on heavy metals.

Solar-assisted high-efficient cleanup of viscous crude oil spill using an ink-modified plant fiber sponge

Rapid and efficient clean-up of viscous crude oil spills is still a global challenge due to its high viscous and poor flowability at room temperature. The hydrophobic/oleophilic absorbents with three-dimensional porous structure have been considered as a promising candidate to handle oil spills. However, they still have limited application in recovering the high viscous oil. Inspired by the viscosity of crude oil depended on the temperature, a solar-heated ink modified plant fiber sponge (PFS@GC) is fabricated via a simple and environmentally friendly physical foaming strategy combined with in-situ ink coating treatment. After wrapping by the polydimethylsiloxane (PDMS), the modified PFS@GC (PFS@GC@PDMS) exhibits excellent compressibility, high hydrophobic (141° in water contact angle), solar absorption (> 96.0%), and oil absorptive capacity (12.0-27.8 g/g). Benefiting from the favorable mechanical property and photothermal conversion capacity, PFS@GC@PDMS is demonstrated as a high-performance absorbent for crude oil clean-up and recovery. In addition, PFS@GC@PDMS can also be applied in a continuous absorption system for uninterrupted recovering of oil spills on the water surface. The proposed solar-heated absorbent design provides a new opportunity for exploring biomass in addressing large-scale oil spill disasters.

Cogel Strategy for the Preparation of a "Thorn"-Like Porous Halloysite/Gelatin Composite Aerogel with Excellent Mechanical Properties and Thermal Insulation

This work presents the preparation and property characterization of a biomass gelatin (GA)-based aerogel. Halloysite nanotubes (HNTs) were used to improve the mechanical strength, pore size distribution, and thermal stability of the aerogel. Polyethyleneimine (PEI) and (3-glycidyloxypropyl)trimethoxysilane (GPTMS) were utilized to increase the interfacial interaction between HNTs and GA through chemical cross-linking. Green, sustainable, and low-cost composite aerogels were prepared by "cogel" and freeze-drying techniques. The experimental results show that the HNTs/GA composite aerogel has a low density (31.98-57.48 mg/cm³), a high porosity (>95%), a low thermal conductivity (31.85-40.16 mW m^-1 K^-1), and superior moldability. In addition, the mechanical strength and thermal insulation properties of the HNTs/GA composite aerogels with a "thorn"-like lamellar porous network structure are different in the axial direction versus the radial direction. The maximum compressive strength, maximum compressive modulus, and corresponding specific modulus in the axial direction were 1.81 MPa, 5.45 MPa, and 94.8 kN m kg^-1, respectively. Therefore, the biomass/clay composite aerogel will be a sustainable and renewable functional material with high mechanical strength and thermal insulation properties, which is expected to further promote biomass and clay for high value utilization.

A Flexible and Degradable Hybrid Mineral as a Plastic Substitute

The development of environmentally friendly plastics is critical to ensure sustainable development. In contrast to polymer plastics derived from petrochemicals, inorganic minerals, which are the most abundant matter in Earth's crust, are environmentally friendly. However, the brittleness of these minerals limits their applications as plastics. Here, because of the advantages of both biomineralization and inorganic ionic polymerization, the calcium phosphate (CaP, a typical geological and biological mineral) oligomers are used for biomimetic mineralization under the regulation of polyvinyl alcohol and sodium alginate, resulting in flexible CaP nanofibers with periodic structural defects. The assembly of CaP nanofibers produces a hierarchically structured bulk hybrid mineral (HM), which overcomes the intrinsic brittleness of minerals and exhibits plasticity characteristics. HM exhibits better hardness and thermostability than classical polymer plastics due to its dominant mineral composition. Notably, HM is environmentally friendly and degradable in nature, as it can potentially participate in geological cycles, indicating that this material is an optimal plastic substitute. The construction of periodic structural defects within flexible minerals expands the current understanding of materials science.

Fibrous Aerogels for Solar Vapor Generation

Solar-driven vapor generation is emerging as an eco-friendly and cost-effective water treatment technology for harvesting solar energy. Aerogels are solid materials with desirable high-performance properties, including low density, low thermal conductivity, and high porosity with a large internal surface, which exhibit outstanding performance in the area of solar vapor generation. Using fibers as building blocks in aerogels could achieve unexpected performance in solar vapor generation due to their entangled fibrous network and high surface area. In this review, based on the fusion of the one-dimensional fibers and three-dimensional porous aerogels, we discuss recent development in fibrous aerogels for solar vapor generation based on building blocks synthesis, photothermal materials selection, pore structures construction and device design. Thermal management and water management of fibrous aerogels are also evaluated to improve evaporation performance. Focusing on materials science and engineering, we overview the key challenges and future research opportunities of fibrous aerogels in both fundamental research and practical application of solar vapor generation technology.

Flexible Ceramic Fibers: Recent Development in Preparation and Application

Flexible ceramic fibers (FCFs) have been developed for various advanced applications due to their superior mechanical flexibility, high temperature resistance, and excellent chemical stability. In this article, we present an overview on the recent progress of FCFs in terms of materials, fabrication methods, and applications. We begin with a brief introduction to FCFs and the materials for preparation of FCFs. After that, various methods for preparation of FCFs are discussed, including centrifugal spinning, electrospinning, solution blow spinning, self-assembly, chemical vapor deposition, atomic layer deposition, and polymer conversion. Recent applications of FCFs in various fields are further illustrated in detail, including thermal insulation, air filtration, water treatment, sound absorption, electromagnetic wave absorption, battery separator, catalytic application, among others. Finally, some perspectives on the future directions and opportunities for the preparation and application of FCFs are highlighted. We envision that this review will provide readers with some meaningful guidance on the preparation of FCFs and inspire them to explore more potential applications.

The preparation of hydroxyapatite nanowires and nanorods via aliphatic micelles as soft templates

Hydroxyapatite nanoparticles were tunably synthesized via the use of an aliphatic–ethanol–water three-phase mixture system using micelles as soft templates via an emulsion–hydrothermal synergistic method.

Osteogenic Property Regulation of Stem Cells by a Hydroxyapatite 3D-Hybrid Scaffold With Cancellous Bone Structure

Cancellous bone plays an indispensable role in the skeletal system due to its various functions and high porosity. In this work, chitosan and hydroxyapatite nanowires (CS@HAP NWs) hybrid nanostructured scaffolds with suitable mechanical properties, high porosity and a fine porous structure were prepared to simulate the 3-dimensional structure of cancellous bone. The 3D-hybrid scaffolds promote cell adhesion and the migration of human adipose-derived stem cells (hADSCs) inside the scaffolds. The cavities in the scaffolds provide space for the hADSCs proliferation and differentiation. Moreover, the various contents of HAP and the induced mechanical property changes regulate the differentiation of hADSCs toward osteoblasts. Overall, cellular fate regulation of hADSCs via rationally engineered HAP-based hybrid scaffolds is a facile and effective approach for bone tissue engineering.

Synthesis, structures and properties of hydrophobic Alkyltrimethoxysilane-Polyvinyltrimethoxysilane hybrid aerogels with different alkyl chain lengths

HYPOTHESIS

Alkyltrimethoxysilane (ATMS) is among most widely used silane coupling agents. These commercially available, reasonably priced chemicals are often utilized to improve the compatibility of inorganic surfaces with organic coatings. With three hydrolysable moieties, ATMS is an outstanding candidate for solving the hydrophilicity, moisture sensitivity and high cost of silica aerogels. However, ATMS has a non-hydrolysable alkyl chain that undergoes cyclization reactions. The alkyl chain prevents ATMS from being incorporated in aerogel structures. Polyvinyltrimethoxysilane (PVTMS) is a silica precursor that offers two types of crosslinking to the final aerogel product. This strong doubly-crosslinked network can potentially suppress the cyclization reactions of ATMS and include it in aerogel structure.

EXPERIMENTS

PVTMS was used with ATMS having different alkyl lengths (3-16 carbons) and loadings (25 or 50 wt%) as the silica precursors. Acid and base catalysts were used to perform hydrolysis and condensation reactions on the mixture and ATMS:PVTMS aerogels were obtained via supercritical drying.

FINDINGS

The incorporation of ATMS in the aerogels was approved by different characterization methods. Results showed that ATMS:PVTMS aerogels possess hydrophobicity (θ ∼ 130°), moisture resistance, varying surface area (44-916 m²·g^-1), meso/microporous structure and thermal insulation properties (λ ∼ 0.03 W·m^-1K^-1). These samples also showed excellent performance in oil and organic solvent adsorption.

Highly Stretchable Fully Biomass Autonomic Self-Healing Polyamide Elastomers and Their Foam for Selective Oil Absorption

Renewable polymers with self-healing ability, excellent elongation, hydrophobicity, and selective oil absorption attributes are of interest for an extensive range of applications, such as e-skin, soft robots, wearable devices, and cleaning up oil spills. Herein, two fully renewable eco-friendly polyamide (PA)-based self-healing elastomers (namely, PA36,IA, and PA36,36) were prepared by a facile and green one-pot melt polycondensation of itaconic acid (IA), PripolTM 1009, and PriamineTM 1075 monomers. The molecular structures of these PAs were analyzed by FITR, 1H NMR, and 13C NMR. The distinct structure of these PAs shows superior strain values (above 2300%) and high ambient temperature autonomous self-healing ability. Interestingly, the synthesized renewable PA36,36 showed zero water absorption values and hydrophobic properties with a contact angle of θ = 91° compared to the synthesized PA36,IA and other previously reported PAs. These excellent attributes are due to the low concentration of amide groups, the highly entangled main chains, the intermolecular diffusion, the manifold dangling chains, and the numerous reversible physical bonds within the renewable PAs. Furthermore, the hydrophobic properties may aid in the selective oil absorption of the PA36,36-based foam, for which PA36,36 foam is produced by the green supercritical carbon dioxide (scCO2) batch foaming process. The PA36,36 foam with a microporous cellular structure showed better absorption capacity and high stability in repeated use. Due to these advantages, these bio-based PAs have potential for the production of eco-friendly self-healing materials, superabsorbent foams, and other polymeric materials.

Investigation of Microstructures and Air Permeability of Aerogel-Coated Textile Fabric Materials

This study focuses on fabrication of aerogel-coated macroporous polyester fabrics for the purposes of filtration of nanometric airborne particles and potential application in facemasks. Syndiotactic polystyrene (sPS) and polyimide (PI) gels that provide respectively majority macropores (diameter > 50 nm) and mesopores (diameter 2 to 50 nm) are coated onto woven polyester fabrics via a dip coating process. The resultant materials are supercritically dried to obtain aerogelcoated fabrics. The results show that sPS is more suitable for the dip coating process. However, evaporation of the solvent during handling of gel-coated fabrics leads to closure of the surface pores that are later recovered via solvent annealing. The resultant aerogel-coated fabrics offer high air permeability (∼10–10 m2) and high filtration efficiency (> 99.95%) of airborne sodium chloride test particles of size 25 to 150 nm.

Highly porous and elastic aerogel based on ultralong hydroxyapatite nanowires for high-performance bone regeneration and neovascularization

Hydroxyapatite (HAP) is promising for the clinical treatment of bone defects because of its excellent biocompatibility and osteo-conductivity. However, highly porous HAP scaffolds usually exhibit high brittleness and poor mechanical properties, thus organic constituents are usually added to form composite materials. In this work, a highly porous and elastic aerogel made from ultralong HAP nanowires with ultrahigh porosity (∼98.5%), excellent elasticity and suitable porous structure is prepared as the high-performance scaffold for bone defect repair. The highly porous structure of the as-prepared aerogel is beneficial to bone ingrowth and matter/fluid transfer, and the high elasticity can ensure the structural integrity of the scaffold during bone regeneration. Therefore, the HAP nanowire aerogel scaffold can promote the adhesion, proliferation and migration of rat bone marrow derived mesenchymal stem cells (rBMSCs), and elevate the protein expression of osteogenesis and angiogenesis related genes. The in vivo experimental results demonstrate that the HAP nanowire aerogel scaffold is favorable for the ingrowth of new bone and blood vessels, and thus can greatly accelerate bone regeneration and neovascularization. The as-prepared HAP nanowire aerogel scaffold shows promising potential for biomedical applications such as bone defect repair.

Fabrication and application of macroscopic nanowire aerogels

Assembly of nanowires into three-dimensional macroscopic aerogels not only bridges a gap between nanowires and macroscopic bulk materials but also combines the benefits of two worlds: unique structural features of aerogels and unique physical and chemical properties of nanowires, which has triggered significant progress in the design and fabrication of nanowire-based aerogels for a diverse range of practical applications. This article reviews the methods developed for processing nanowires into three-dimensional monolithic aerogels and the applications of the resultant nanowire aerogels in many emerging fields. Detailed discussions are given on gelation mechanisms involved in every preparation method and the pros and cons of the different methods. Furthermore, we systematically scrutinize the application of nanowire-based aerogels in the fields of thermal management, energy storage and conversion, catalysis, adsorbents, sensors, and solar steam generation. The unique benefits offered by nanowire-based aerogels in every application field are clarified. We also discuss how to improve the performance of nanowire-based aerogels in those fields by engineering the compositions and structures of the aerogels. Finally, we provide our perspectives on future development of nanowire-based aerogels.

Low-Density Silk Nanofibrous Aerogels: Fabrication and Applications in Air Filtration and Oil/Water Purification

A method was developed to fabricate light, water-insoluble silk fibroin nanofibrous aerogels (SNFAs) through solvent welding of lyophilized silk nanofibrous 3D networks at the junction points while converting silk structures from random-coils to β-sheets (water insoluble). Aromatic alcohols, especially phenethyl alcohol (PEA), supported robust solvent welding and the structural conversion of silk. PEA vapor treatment was a better approach than solvent infusion to retain volume, density, and mechanical strength of the SNFAs. The mechanical properties of highly orientated SNFAs were superior to randomly distributed fibers. The SNFAs had a low density (3.5 mg/cm³), high hydrophobicity (140.9°), and a porous surface morphology on the individual nanofibers, resulting in high efficiency and selectivity for absorbing particulate matter and oils. Compared with commonly used inorganic aerogels, the SNFAs developed in this study are biocompatible, easily functionalized, environmentally friendly, and low-cost and therefore have potential for air and water purification, biosensors, drug delivery, and tissue engineering.

Construction of a Superhydrophobic Sodium Alginate Aerogel for Efficient Oil Absorption and Emulsion Separation

Bio-based aerogels serve as potential materials in separation of oil/water mixtures. Nevertheless, there remain some key challenges, including expensive/toxic organic cross-linkers, unpromising reusability, and poor performance in emulsion separation. Hereby, a novel, robust, and superhydrophobic sodium alginate/graphene oxide/silicon oxide aerogel (SA/GO/SiO₂-M) was fabricated by simple calcium ion cross-linking self-assembly, freeze-drying, and chemical vapor deposition methods based on the renewable and abundant raw materials. The as-prepared SA-based aerogel possesses high absorbency for varieties of organic solvents and oils. Importantly, it shows high efficiency in the separation of surfactant-stabilized water-in-oil emulsions. SA/GO/SiO₂-M aerogels display excellent reusability in both absorption and separation because of their good mechanical properties in the air and oil phase, and the mechanism in emulsion separation is discussed. This study shows that SA/GO/SiO₂-M aerogels are a promising material in treating oil contaminants from different fields.

One-Minute Synthesis of a Supramolecular Hydrogel from Suspension-Gel Transition and the Derived Crystalline, Elastic, and Photoactive Aerogels

Solutions or sols are commonly employed as the starting materials for the preparation of supramolecular hydrogels; however, suspension-based synthesis has been much less reported because of inhomogeneity and quick sedimentation of large particles in a suspension. Further, it remains a technical challenge to derive supramolecular aerogels directly from the parental hydrogels owing to the ease of structural collapse during water removal. Herein, we report a suspension-gel transition for the ultrafast synthesis of a new supramolecular hydrogel simply by adding AgNO₃ into the aqueous suspension of cyanuric acid-melamine (CAM) aggregates. With the activation of preadded ammonia, Ag ions instantly reacted with the CAM particles, transforming into N-Ag(I)-N coordinating bonded supramolecular nanofibers; simultaneously, the suspension converted to a hydrogel without the use of polymer cross-linkers or external stimulus. Upon simple freeze-drying, a highly crystalline fibrous aerogel with a cellular network was obtained, which possessed a porosity up to 99.7% and a density as low as 4.8 mg/cm³, enabling remarkable oil uptake capacities (100 times of its weight). The supramolecular aerogel demonstrated intrinsic elasticity, which should arise from the cellular structure and elastic character of the nanofiber skeletons. Notably, the aerogel showed high compatibility to incorporate a range of external substances for further functionalization exemplified by polymeric carbon nitride (PCN, a metal-free semiconductor) included gels. The loaded PCN resulted in enhanced mechanical strength and endowed the aerogel unique photoactivity, i.e., in situ reducing Ag(I) into Ag nanoparticles upon light illumination and thus forming a plasmonic shell over the aerogel with potential applications in sensing and catalysis.

Biomimetic Durable Multifunctional Self-Cleaning Nanofibrous Membrane with Outstanding Oil/Water Separation, Photodegradation of Organic Contaminants, and Antibacterial Performances

Wastewater pollution has always been one of the most severe worldwide environmental problems. In addition, in light of the frequent oil spills that have occurred in recent years, the treatment of oily wastewater is particularly important. In this work, a novel zeolitic imidazolate framework-8@thiolated graphene (ZIF-8@GSH) composites-based polyimide (PI) nanofibrous membrane was developed via a facile electrospinning and in situ hydrothermal synthesis approaches for effective purification of oily wastewater. The membrane showed superhydrophobicity/superoleophilicity and high separation efficiency (>99.9%) for a wide range of oil/water mixtures and water-in-oil emulsions. Besides, the membrane demonstrated excellent photocatalytic dye degradation, antibacterial, self-cleaning, and mechanochemical durable abilities, showing high potential in oily wastewater treatment and water remediation.

1D Ceric Hydrogen Phosphate Aerogels: Noncarbonaceous Ultraflyweight Monolithic Aerogels

Ceric hydrogen phosphate gels possess a very unique spatial organization, being nearly amorphous materials with a fibrous structure. Using a sol-gel approach, we succeeded in preparing bulky gels containing as much as 20,000 molecules of water per cerium atom. Supercritical treatment of these gels made it possible to obtain the first ultralight monolithic noncarbonaceous aerogels with a density as low as 1 mg/cm3.

Rational and wide-range tuning of CNT aerogel conductors with multifunctionalities

Different from conventional conductors, elastic 3D nanoarchitectured conductors have shown promise in developing various flexible devices. However, rational design and control of their microstructures to achieve desired physicochemical properties is challenging and lacks comprehensive and profound investigation. In this study, we report an interesting quantitative correlation between density and physical properties when highly porous CNT aerogels are densified, enabling a wide-range tuning of CNT 3D networked structures with different functions. Upon densification by compressing the original thickness of a CNT aerogel by 100 fold, a linear double-logarithmic structure-property relationship in terms of both thickness and density is witnessed, with the resultant density increased by a factor of 100 from 3 to 286 mg cm-3, Young's modulus by 20 times (5.0-105 kPa), electrical conductivity by 400 times (0.4-163 s cm-1), and thermal conductivity by 140 times (0.048-6.7 W m-1 K-1). It can be thus inferred that the CNT aerogel can be regulated with desired mechanical, electrical and thermal properties in a quantitative manner over a wide range, making it promising as a multifunctional aerogel conductor. As a proof, two pieces of CNT aerogel conductors tailored with high conductivity and low thermal conductivity are employed to fabricate a flexible TE device using a simple all-carbon design, which yields a typical power density of 27.5 μW cm-2 and stable outputs under various deformations, demonstrating a potential strategy for design and fabrication of low-cost, flexible and portable power-generation devices.

A one-step-assembled three-dimensional network of silver/polyvinylpyrrolidone (PVP) nanowires and its application in energy storage

Creating ultralight monolithic metal foams remains an outstanding challenge despite their important applications, e.g., in electronics, sensors and energy storage. Herein, a facile methodology is developed for one-step fabrication of silver/polyvinylpyrrolidone (PVP) nanowire (AgPNW) hydrogel and high-quality robust ultralight AgPNW aerogel (AgPNWA) on a large scale. The hydrogel is directly formed by in situ assembling hydrothermally-synthesized AgPNWs. The resultant ultralight AgPNWA exhibits very high electrical conductivity. The application of this one-step fabricated AgPNWA to enhance phase change materials (PCMs) for high-efficiency thermal energy storage is investigated. The AgPNWA-paraffin composite (APC) shows ∼350% thermal-efficiency enhancement, ∼463% mechanical hardening, and strong reliability against thermal cycling due to the potentially strong AgPNW-paraffin interfacial interaction. It is also observed that the thickness of the APC shrinks significantly but there is no change in its diameter during thermal cycles. Analytical models of liquid capillary filling of deformable fiber-based 3D networks are derived for the first time and are applied to analyze the thermal-cycling-induced-shape-stabilization behavior of the APC and the vaporization-induced collapse behavior of the AgPNW network. This work provides important insights into designing a facile 3D assembly of nanomaterials, and thermal energy storage materials with high performance and reliability.

A novel bovine serum albumin and sodium alginate hydrogel scaffold doped with hydroxyapatite nanowires for cartilage defects repair

Cartilage tissue engineering has become the trend of cartilage defect repair owing to the engineered biomimetic tissue that can mimic the structural, biological and functional characteristics of natural cartilage. Biomaterials with high biocompatibility and regeneration capacity are expected to be used in cartilage tissue engineering. Herein, in this study, a dual-network bovine serum albumin/sodium alginate with hydroxyapatite nanowires composite (B-S-H) hydrogel scaffold has been prepared for cartilage repair. The obtained B-S-H hydrogel scaffold exhibits ideal physical properties, such as excellent mechanical strength, high porosity and swelling ratio, as well as the excellent biological activity to promote the human bone marrow derived mesenchymal stem cells (hBMSCs) proliferation and differentiation. The in vivo study further shows that the B-S -H hydrogel scaffold can obviously promote the generation of new cartilage that integrates well with surrounding tissues and is similar to adjacent cartilage in terms of thickness. It is considered that the B-S-H hydrogel scaffold has great potential in the application of cartilage defects repair.

Engineering of Aerogel-Based Biomaterials for Biomedical Applications

Biomaterials with porous structure and high surface area attract growing interest in biomedical research and applications. Aerogel-based biomaterials, as highly porous materials that are made from different sources of macromolecules, inorganic materials, and composites, mimic the structures of the biological extracellular matrix (ECM), which is a three-dimensional network of natural macromolecules (e.g., collagen and glycoproteins), and provide structural support and exert biochemical effects to surrounding cells in tissues. In recent years, the higher requirements on biomaterials significantly promote the design and development of aerogel-based biomaterials with high biocompatibility and biological activity. These biomaterials with multilevel hierarchical structures display excellent biological functions by promoting cell adhesion, proliferation, and differentiation, which are critical for biomedical applications. This review highlights and discusses the recent progress in the preparation of aerogel-based biomaterials and their biomedical applications, including wound healing, bone regeneration, and drug delivery. Moreover, the current review provides different strategies for modulating the biological performance of aerogel-based biomaterials and further sheds light on the current status of these materials in biomedical research.