Selective Adsorption of Rare Earth Elements over Functionalized Cr-MIL-101

Local Coordination Environment of Lanthanides Adsorbed onto Cr- and Zr-based Metal-Organic Frameworks

Separating individual lanthanide (Ln) elements in aqueous mixtures is challenging. Ion-selective capture by porous materials, such as metal-organic frameworks (MOFs), is a promising approach. To design ion-selective MOFs, molecular details of the Ln adsorption complexes within the MOFs must be understood. We determine the local coordination environment of lanthanides Nd(III), Gd(III), and Lu(III) adsorbed onto Cr(III)-based terephthalate MOF (Cr-MIL-101) and Zr(IV)-based Universitet in Oslo MOFs (UiO-66 and UiO-68) and their derivatives. In the Cr(III)- and Zr(IV)-based MOFs, Ln adsorb as inner-sphere complexes at the metal oxo clusters, regardless of whether the organic linkers are decorated with amino groups. Missing linkers result in favorable Ln binding sites at oxo clusters; however, Ln can coordinate to metal sites even with linkers in place. MOF functionalization with phosphonate groups led to Ln chemisorption onto these groups, which out-compete metal cluster sites. Ln form monodentate and bidentate and mononuclear and binuclear surface complexes. We conclude that MOFs for ion-selective Ln capture can be designed by a combination of (1) maximizing metal-lanthanide interactions via shared O atoms at the metal oxo cluster sites, where mixed oxo clusters can lead to ion-selective Ln adsorption, and (2) functionalizing MOFs with Ln-selective groups capable of out-completing the metal oxo cluster sites.

Efficient Capture and Release of the Rare-Earth Element Neodymium in Aqueous Solution by Recyclable Covalent Organic Frameworks

Rare-earth elements (REEs) are present in a broad range of critical materials. The development of solid adsorbents for REE capture could enable the cost-effective recycling of REE-containing magnets and electronics. In this context, covalent organic frameworks (COFs) are promising candidates for REE adsorption due to their exceptionally high surface area. Despite having attractive physical properties, COFs are heavily underutilized for REE capture applications due to their limited lifecycle in aqueous acidic environments, as well as synthetic challenges associated with the incorporation of ligands suitable for REE capture. Here, we show how the Ugi multicomponent reaction can be leveraged to postsynthetically modify imine-based COFs for the introduction of a diglycolic acid (DGA) moiety, an efficient scaffold for REE capture. The adsorption capacity of the DGA-functionalized COF was found to be more than 40 times higher than that of the pristine imine COF precursor and more than four times higher than that of the next-best reported DGA-functionalized solid support. This rationally designed COF has appealing characteristics of high adsorption capacity, fast and efficient capture and release of the REE ions, and reliable recyclability, making it one of the most promising adsorbents for solid-liquid REE ion extractions reported to date.

Adsorption Study of Neodymium from the Aqueous Phase Using Fabricated Magnetic Chitosan-Functionalized Graphene Oxide Composites

This work reports the performances of the magnetic chitosan@graphene oxide composite (MCh@GO) for the sorption of Nd(III) from aqueous medium. The prepared composite was synthesized by a coprecipitation method and then examined by FT-IR, XRD, SEM, and TGA. XRD analysis proved physical interactions between magnetic chitosan and graphene oxide through (inter- and intramolecular H-bonding and peptide bonding). TGA data approved the thermal stability of the prepared MCh@GO nanocomposite over their constituents. The optimum pH for the sorption process was 4.5. The Langmuir model and PSO fitted the experimental data. The adsorption process was found to be endothermic and spontaneous with a Q max of 56.6 mg g-1. Indeed, the MCh@GO composite proved to be an excellent adsorbent for the purification, remediation, and separation of Nd due to its promising properties.

Overview of Functionalized Porous Materials for Rare-Earth Element Separation and Recovery

The exceptional photoelectromagnetic characteristics of rare-earth elements contribute significantly to their indispensable position in the high-tech industry. The exponential expansion of the demand for high-purity rare earth and related compounds can be attributed to the swift advancement of contemporary technology. Nevertheless, rare-earth elements are finite and limited resources, and their excessive mining unavoidably results in resource depletion and environmental degradation. Hence, it is crucial to establish a highly effective approach for the extraction and reclamation of rare-earth elements. Adsorption is regarded as a promising technique for the recovery of rare-earth elements owing to its simplicity, environmentally friendly nature, and cost-effectiveness. The efficacy of adsorption is contingent upon the performance characteristics of the adsorbent material. Presently, there is a prevalent utilization of porous adsorbent materials with substantial specific surface areas and plentiful surface functional groups in the realm of selectively separating and recovering rare-earth elements. This paper presents a thorough examination of porous inorganic carbon materials, porous inorganic silicon materials, porous organic polymers, and metal-organic framework materials. The adsorption performance and processes for rare-earth elements are the focal points of discussion about these materials. Furthermore, this work investigates the potential applications of porous materials in the domain of the adsorption of rare-earth elements.

ZIF-8 Used for the Selective Recovery of Heavy Rare Earth Elements from Mining Wastewater

In this study, a sample of 2-methylimidazole zinc salt (ZIF-8) demonstrated high selectivity for the recovery of heavy rare earth elements (REEs) from real rare earth mining wastewater. Results show that the distribution coefficient values of Y3+ (4.02 × 104 mL·g-1), Gd3+ (7.8 × 104 mL·g-1), and Dy3+ (6.8 × 104 mL·g-1) are orders of magnitude higher than those of K+ (359.51 mL·g-1), Mn2+ (266.67 mL·g-1), Ca2+ (396.42 mL·g-1), and Mg2+ (239.48 mL·g-1). Moreover, the desorption efficiency of heavy REEs exceeded 40%. Advanced characterizations and density functional theory (DFT) calculations were utilized to elucidate that the heavy REEs were more likely to bind to the nitrogen atoms of imidazole groups on ZIF-8 compared to non-REEs. Furthermore, the adsorption and desorption of heavy REEs primarily depend on the chemical interaction confirmed by adsorption kinetics, isotherm model, and thermodynamic analysis, which involves the dissociation of water and the formation of REE-O bonds. Finally, the ZIF-8 exhibits a remarkable recovery efficiency of over 40% for heavy REEs in column tests conducted over 7h. The findings reported here provide new insights into the selective recovery of heavy REEs from real mining wastewater.

Novel phosphate functionalized sodium alginate hydrogel for efficient adsorption and separation of Nd and Dy from Co

The recovery of rare earth elements (REEs) including neodymium (Nd) and dysprosium (Dy) from NdFeB permanent magnets has become one of the main ways to solve the increased demand for rare earth. Herein, n-dodecyl phosphate (DPPA) was used for the first time as the adsorption functional group donor, sodium alginate as the substrate, and calcium chloride solution as the reactive solvent, a hybrid hydrogel adsorbent DPPA/CaALG was synthesized by sol-gel method for application in the adsorption and separation of Nd and Dy from the Co-Nd-Dy ternary system. SEM-EDS, and N2 adsorption-desorption analysis showed the successful preparation of DDPA/CaALG with mesoporous structure. Batch experiments showed the superiority of the hybrid hydrogel for the good selective adsorption of Nd and Dy, such as large adsorption capacity (Nd: 162.5 mg/g, Dy: 183.5 mg/g), and no adsorption for Co. FT-IR, XPS showed that PO and P-O groups are involved in the adsorption process of Nd and Dy as electron acceptors, where the ion exchange of P-OH is dominant. Furthermore, the chemical properties of ligands and complexes were analyzed by Density Functional Theory (DFT) calculations and revealed their adsorption behaviors as well as the competition between different metal ions.

Rationally designed nanotrap structures for efficient separation of rare earth elements over a single step

Extracting rare earth elements (REEs) from wastewater is essential for the growth and an eco-friendly sustainable economy. However, it is a daunting challenge to separate individual rare earth elements by their subtle differences. To overcome this difficulty, we report a unique REE nanotrap that features dense uncoordinated carboxyl groups and triazole N atoms in a two-fold interpenetrated metal-organic framework (named NCU-1). Notably, the synergistic effect of suitable pore sizes and REE nanotraps in NCU-1 is highly responsive to the size variation of rare-earth ions and shows high selectivity toward light REE. As a proof of concept, Pr/Lu and Nd/Er are used as binary models, which give a high separation factor of SFPr/Lu = 796 and SFNd/Er = 273, demonstrating highly efficient separation over a single step. This ability achieves efficient and selective extraction and separation of REEs from mine tailings, establishing this platform as an important advance for sustainable obtaining high-purity REEs.

Development and assessment of isatin hydrazone-functionalized/ion-imprinted cellulose adsorbent for gadolinium (III) removal

It is of tremendous economic and environmental significance to obtain a powerful adsorbent for the extraction of Gd3+ from wastewater. Adsorbents derived from cellulosic materials functionalized with specific chelators show great promise for the removal of heavy metal ions from wastewater. The selectivity of these sorbents for metal ions is, however, still rather poor. Here, we present a technique for trapping Gd3+ ions from wastewater by synthesizing Gd3+ ion-imprinted polymers based on isatinhydrazone-functionalized cellulose (Gd-ISH-CE). Not only did isatinhydrazone work as a tridentate ligand to directly provide ligand vacancies and build hierarchy pores on Gd-ISH-CE, but it also enabled cross-linking through the epichlorohydrine cross-linker thanks to its very effective NH2 functionalization. The as-prepared Gd-ISH-CE with ISH functionality shows a high adsorption capacity of 275 mg/g and a rapid equilibration time of 30 min for Gd3+ due to its plentiful binding sites and hierarchical pore structure. Furthermore, Gd-ISH-CE shows very selective capture of Gd3+ over competing ions. By integrating the benefits of ion-imprinting and chelator functionalization methodologies in an effortless manner, this study presents a practical approach to the development of superior materials for Gd3+ recovery.

Two novel nitrogen-rich metal-organic nanotubes: syntheses, structures and selective adsorption toward rare earth ions

The construction and development of metal-organic nanotubes (MONTs) with nanoscale interior channel diameters for potential applications is of great interest. An angular nitrogen-rich ligand, 3,6-bis(2-ethylimidazole)-2-methylpyrimidine (beim-CH3), was designed to construct MONTs by coupling with the V-shaped carboxylate ligands of benzophenone 4,4'-dicarboxylic acid (H2bpndc) and 4,4'-oxybisbenzoic acid (H2obba). Two new MONTs were synthesized and named NCD-166 ([Zn(bpndc)(beim-CH3)]·H2O) and NCD-167 ([Zn(obba)(beim-CH3)]·H2O), and they were isostructural and have almost identical tube inner diameters of approximately 1.76 nm. Benefiting from the abundantly exposed nitrogen and oxygen atoms in their tube walls and open nanoporous channels, they display superior adsorption capacities for Eu3+ (150.90 mg g-1) and high adsorption selectivity (>96%) in the low-concentration solutions. Additionally, it was revealed that the adsorption effect of ether oxygen on rare earth elements was significantly better than that of carbonyl oxygen. The adsorption isotherm conformed to the Langmuir model and the adsorption kinetics obeyed the pseudo-second-order model. These results clearly indicate that such novel MONTs are favorable sorbents for REEs.

Recovery of Ce and La from phosphogypsum leachate by adsorption using grape wastes

The present research aimed to evaluate the use of grape stalk in the adsorption of lanthanum and cerium to identify the best operating conditions enabling the application of the bioadsorbent in REEs leached from phosphogypsum. The grape stalk was characterized and showed an amorphous structure with a heterogeneous and very porous surface. Also, it was possible to identify the groups corresponding to carboxylic acids, phenols, alcohols, aliphatic acids, and aromatic rings. The pH effect study showed that the adsorption process of La3+ and Ce3+ ions was favored at pH 5.0. The adsorption kinetics followed the pseudo-second-order model. In just 20 min, 80% saturation was reached, while equilibrium was reached after 120 min. The adsorption isotherms were appropriately adjusted to the Langmuir model, and the maximum adsorption capacities were obtained at 298 K, which were 35.22 mg g-1 for La3+ and 37.99 mg g-1 for Ce3+. Furthermore, the adsorption process was favorable, spontaneous, and exothermic. In the study's second phase, phosphogypsum was leached with a sulfuric acid solution. Then, the adsorption of REEs was carried out under the experimental conditions of pH after leaching and pH 5.0 (adjustment carried out with sodium hydroxide solution) at 298 K for 120 min and with adsorbent dosages of 1 and 5 g L-1. This process resulted in removal percentages above 95% for the most abundant REEs, such as neodymium, lanthanum, and cerium, at pH 5.0 and a dosage of 5 g L-1, demonstrating the effectiveness of the bioadsorbent used. These results indicate the potential of using grape residue as a promising bioadsorbent in recovering rare earth elements from phosphogypsum leachate.

Phosphonic Acid-Functionalized MIL-53(Al) As an Efficient Sorbent for Trace Rare Earth Elements Preconcentration, Storage and Their Determination by X-ray Fluorescence Spectrometry

In this work, a simple and novel method coupling solid phase extraction (SPE) with X-ray fluorescence spectrometry (XRF) is proposed for the simultaneous determination of 15 kinds of trace rare earth elements (REEs) in water samples. A phosphonic acid functionalized metal-organic framework named BPG-MIL-53(Al) was prepared via postsynthetic modification and served as an efficient adsorbent for these REEs. The prepared BPG-MIL-53(Al) could almost completely adsorb REEs in 5 min under neutral conditions. After filtration, REEs-adsorbed BPG-MIL-53(Al) was deposited on a filter membrane to form a thin film, which was directly analyzed by XRF. The XRF intensities of the REEs-retained MOF disc remained almost unchanged after six months. Taking advantage of this strategy, XRF was able to quantitate ng mL-1 levels of REEs in water samples, achieving impressive limits of detection in the range of 0.4-4.7 ng mL-1. The proposed method was applied to the on-site collection and analysis of REEs in real water samples with desirable accuracy and spike recoveries obtained.

Polymeric Materials for Rare Earth Elements Recovery

Rare earth elements (REEs) play indispensable roles in various advanced technologies, from electronics to renewable energy. However, the heavy global REEs supply and the environmental impact of traditional mining practices have spurred the search for sustainable REEs recovery methods. Polymeric materials have emerged as promising candidates due to their selective adsorption capabilities, versatility, scalability, and regenerability. This paper provides an extensive overview of polymeric materials for REEs recovery, including polymeric resins, polymer membranes, cross-linked polymer networks, and nanocomposite polymers. Each category is examined for its advantages, challenges, and notable developments. Furthermore, we highlight the potential of polymeric materials to contribute to eco-friendly and efficient REEs recovery, while acknowledging the need to address challenges such as selectivity, stability, and scalability. The research in this field actively seeks innovative solutions to reduce reliance on hazardous chemicals and minimize waste generation. As the demand for REEs continues to rise, the development of sustainable REEs recovery technologies remains a critical area of investigation, with the collaboration between researchers and industry experts driving progress in this evolving field.

Fabrication of magnesium oxide-calcium alginate hydrogel for scaffolding yttrium and neodymium from aqueous solutions

In this research, the possibility of using sustainable nano-MgO/Ca-alginate beads for efficient sorption of some rare earth metal ions such as neodymium(III) and yttrium(III) from an aqueous acidic solution was explored. The nano-MgO/Ca-alginate beads adsorbent was characterized before and after sorption of Nd(III) and Y(III) using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), energy dispersive X-ray analysis (EDX), and X-ray diffraction (XRD) techniques. Batch sorption parameters were investigated, such as contact time, initial metal ion concentration, and adsorbent dose (V/m). The calculated experimental results showed that the suitable selected sorption conditions were carried out using 100 mg/L of Nd(III) and Y(III) with nano MgO/Ca-alginate beads (contact time = 90 min, pH = 2, V/m = 0.05 L/g). The maximum sorption capacity of 0.1 g of nano MgO/Ca-alginate was found to be 7.85 mg/g and 5.60 mg/g for Nd(III) and Y(III), respectively. The desorption of Nd(III) and Y(III) from the loaded nano MgO/Ca-alginate was achieved with 1.0 M sulfamic acid and found to be 51.0% and 44.2%, respectively. The calculated thermodynamic parameters for the nano MgO/Ca-alginate/Nd/Y system show that the positive charge of ΔHo confirmed the endothermic nature of the sorption process, ΔSo (positive) indicates an increase in reaction system disordering, and ΔGo (negative) indicates a spontaneous process. These kinetic results indicate that the sorption process of Nd(III) and Y(III) on nano MgO/Ca-alginate beads is performed by the chemisorption process.

Eco-friendly methodology for removing and recovering rare earth elements from saline industrial wastewater

In this study, response surface methodology (RSM) was applied with a Box-Behnken design to optimize the biosorption (removal and bioconcentration) of rare earth elements (REEs) (Y, La, Ce Eu, Gd, Tb) by living Ulva sp. from diluted industrial wastewaters (also containing Pt and the classic contaminants Hg, Pb, Zn, Cu, Co, and Cd). Element concentration (A: 10-190 μg/L), wastewater salinity (B: 15-35), and Ulva sp. dosage (C: 1.0-5.0 g/L) were the operating parameters chosen for optimization. Analysis of the Box-Behnken central point confirmed the reproducibility of the methodology and p-values below 0.0001 validated the developed mathematical models. The largest inter-element differences were observed at 24 h, with most REEs, Cu, Pb and Hg showing removals ≥ 50 %. The factor with the greatest impact (positive) on element removal was the initial seaweed dosage (ANOVA, p < 0.05). The optimal conditions for REEs removal were an initial REEs concentration of 10 μg/L, at a wastewater salinity of 15, and an Ulva sp. dosage of 5.0 g/L, attaining removals up to 88 % in 24 h. Extending the time to 96 h allowed seaweed dosage to be reduced to 4.2 g/L while achieving removals ≥ 90 %. The high concentrations in REE-enriched biomass (∑REEs of 3222 μg/g), which are up to 3000 times higher than those originally found in water and exceed those in common ores, support their use as an alternative source of these critical raw materials.

Highly efficient removal of rare earth elements by two-dimensional titanium carbide nanosheets as impacted via water chemistry

The separation and recycling of rare earth elements (REEs) are very important owing to the high demand, limited resource, specific usages, and environmental issues. In this work, two-dimensional Ti3C2Tx MXene was introduced to remove REEs (Nd(III) and La(III)) from water, and its physicochemical properties were conducted by HRTEM, SEM-EDS, XRD, FTIR, and XPS. Various parameters, such as initial pH, REEs initial concentration, contact time, and temperature, were investigated by batch experiment, respectively. Furthermore, the adsorption kinetic and isotherm were examined to analyze the adsorption behavior and adsorption mechanism. Nd(III) and La(III) have a good affinity with Ti3C2Tx MXene surface functional groups (-F, -OH, and containing oxygen groups). The maximum adsorption capacities of Ti3C2Tx MXene for Nd(III) and La(III) were 229.85 mg/g and 175.83 mg/g at T = 333 K, respectively. The adsorption data of Nd(III) on Ti3C2Tx MXene fitted well with the Freundlich isotherms model and pseudo-second-order kinetic model. However, the best fitting for La(III) adsorption on Ti3C2Tx MXene was described by both pseudo-first-order and pseudo-second-order model. Thermodynamic study of Nd(III) and La(III) adsorption on Ti3C2Tx MXene showed that the reaction was a spontaneous and endothermic process. These results indicated Ti3C2Tx MXene had a great potential in extracting REEs from an aqueous solution.

Tuning the Dual Active Sites of Functionalized UiO-66 for Selective Adsorption of Yb(III)

The recovery of rare earth elements (REEs) from discharged electronic devices or mineral waste water is highly essential but still facing challenges. In this work, two amino-functionalized carboxyl-UiO-66 (UiO-66-COOH-TETA and UiO-66-(COOH)₂-ED) prepared via the postmodification method were employed as the adsorbents for Yb(III) capture. The experimental results revealed their superior adsorption capacities of 161.5 and 202.6 mg/g, respectively. Meanwhile, their adsorption processes can be described by the pseudo-second-order kinetic model and Langmuir model. Effects of initial pH and temperature on adsorptions were systematically evaluated, affording an optimal operating condition (i.e., pH of 5.5-6, T of 65 °C, t of 10 h). Moreover, the fabricated materials exhibited great reusability after five adsorption-regeneration cycles. UiO-66-COOH-TETA demonstrated good separation selectivity for Yb(III) over light REEs (i.e., 3.98 of Yb/Ce, 3.51 of Yb/Nd). Based on the density functional theory calculations and characterization analysis (XPS, Zeta, mapping, and IR), the adsorption mechanisms were mainly attributed to significant electrostatic attraction and strong surface complexation between N and O sites and Yb(III).

Tailoring abundant active-oxygen sites of Prussian blue analogues-derived adsorbents for highly efficient Yb(III) capture

The removal of rare earth elements in mineral processing wastewater is highly desirable but still challenging. In this study, three bimetallic Prussian blue analogues (PBA) and six corresponding oxides are prepared by co-precipitation and calcination methods, and then utilized to adsorb aqueous Yb(III) solution. The results of XRD, SEM, BET, and XPS indicate the successful synthesis of all the adsorbents. Among them, three PBA-oxide samples (PBO-800) exhibit the superior adsorption capacities (˃250 mg/g). The adsorption processes of Yb(III) are in accordance with the pseudo-second-order kinetic model and Langmuir model, simultaneously showing the spontaneous and endothermic thermodynamics. Moreover, PBO-800 can be reused after alkaline solution regeneration with less than 10% degradation after five consecutive adsorption-desorption cycles. More importantly, PBO-800 exhibits the impressive separation selectivity of Yb(III) and most light rare earth ions (e.g., 5.51 of Yb/La, 4.03 of Yb/Pr), as well as the selectivity of Yb(III) and alkali metal ions (e.g., 300.5 of Yb/Na, 256.2 of Yb/Ca). According to the characterization analysis and DFT calculation, the adsorption mechanism of Yb(III) by PBO-800 is mainly attributed to the strong interaction between the abundant active-oxygen sites and Yb(III), and the significant electrostatic attraction.

Synthesis and Characterization of Mesoporous Silica Modified with Purpald and Its Application in the Preconcentration of Cu2+ and Cd2+ from Aqueous Samples through Solid-Phase Extraction

The synthesis of an organofunctionalized mesoporous silica was accomplished by a two-step process involving (1) the co-condensation of a silylant agent at the surface of silica, followed by (2) the immobilization of Purpald (ligand) at the organic termination of the silytant agent. The characterization of the organofunctionalized material indicated the presence of NH2 groups, and the immobilization of the ligand was confirmed by 29Si- and 13C-nuclear magnetic resonance. The material’s surface area was determined as 370 m2 g−1. Batch adsorption experiments enabled the determination of optimum pH conditions for the adsorption of Cu(II) and Cd(II). Under optimal pH, the pseudo-second-order kinetic model and Langmuir model provided the best correlations to describe the materials adsorption behavior, suggesting a chemisorption mechanism. When tested in continuous-flow preconcentration experiments, the flow rate and eluent concentration demonstrated to affect the removal of Cu(II) and Cd(II), while the buffer concentration had an effect only over the adsorption of Cu(II). Under optimized preconcentration conditions, it was possible both to determine the concentrations of Cu(II) and Cd(II) in samples such as mineral water, ground water, tap water and river water. Ions commonly found in drinking and natural waters (Na+, K+, Ca2+, Mg2+, Fe3+, Ba2+, Cl−, SO42−, HCO3−, and H2PO4−) did not affect the preconcentration of any of the studied analytes. Reutilization experiments indicated that the adsorbent material can withstand at least 40 adsorption/desorption preconcentration cycles with no efficiency loss.

Polyaminophosphoric Acid-Modified Ion-Imprinted Chitosan Aerogel with Enhanced Antimicrobial Activity for Selective La(III) Recovery and Oil/Water Separation

In this study, polyaminophosphoric acid (PA)-functionalized ion-imprinted chitosan (CS) aerogel was fabricated for the first time, exhibiting good antibacterial property for selective La(III) recovery and oil/water separation. The as-prepared PA-CS-IIA-2 shows a remarkable adsorption capacity of 114.6 mg/g toward La(III) and high selectivity in the competitive adsorption systems, which is attributed to its abundant imprinting sites and surface functional groups. Benefiting from the amphiphilic property, the PA-CS-IIA-2 also exhibits an excellent adsorption performance for the extractant, oils, and organic solvents. Besides, the PA-CS-IIA-2 presents excellent regeneration and reusability characteristics. Moreover, compared with CS, the PA-CS-IIA-2 exhibits a significantly improved antibacterial activity originating from the PA component. Most importantly, the PA-CS-IIA-2 aerogel is capable of removing multiple pollutants all together and effectively inhibiting bacteria in the complex wastewater environments. Therefore, this study paves the way for developing high-performance rare-earth capture materials with multiple functions to meet diverse applications.

Graphene oxide modified with carboxymethyl cellulose for high adsorption capacities towards Nd(III) and Ce(III) from aqueous solutions

This work addresses a simple method to functionalize graphene oxide with sodium carboxymethyl cellulose using tetraethyl orthosilicate as a linker for rapid and significant removal of Nd(III) and Ce(III) from aqueous solutions. The prepared composite (GO–CMC) was characterized by different techniques to confirm the modification and adsorption process. The sorption performance of the GO–CMC was evaluated using Nd(III) and Ce(III) as absorbent materials. The experimental results demonstrated that the sorption process was excellently fitted by the pseudo-second-order kinetic model. The adsorption results were also analyzed by different isotherm models. According to the Langmuir isotherm model, the experimental sorption capacities at pH 3.0 was 661.21 and 436.55 mg/g for Nd(III) and Ce(III), respectively. The thermodynamic results indicated that the sorption process of the two examined metal ions was endothermic and spontaneous. The regenerated GO–CMC composite has a similar removal percentage to the original composite. These results confirmed that the prepared composite (GO–CMC) could be used as an effective adsorbent for Nd(III) and Ce(III) from certain multielement solutions.

Green Preparation of Aminated Magnetic PMMA Microspheres via EB Irradiation and Its Highly Efficient Uptake of Ce(III)

The modification of polymers can significantly improve the ability to remove rare earth ions from wastewater, but so far few studies have focused on the irradiation-induced grafting method. In this study, a novel magnetic chelating resin for Ce(III) uptake was first synthesized by suspension polymerization of PMMA@Fe₃O₄ microspheres followed by irradiation-induced grafting of glycidyl methacrylate (GMA) and subsequent amination with polyethyleneimine (PEI). The FT-IR, SEM, TG and XRD characterization confirmed that we had successfully fabricated magnetic PMMA-PGMA-PEI microspheres with a well-defined structure and good thermal stability. The obtained adsorbent exhibited a satisfactory uptake capacity of 189.81 mg/g for Ce(III) at 318.15 K and an initial pH = 6.0. Additionally, the impact of the absorbed dose and GMA monomer concentration, pH, adsorbent dosage, contact time and initial concentration were thoroughly examined. The pseudo-second order and Langmuir models were able to describe the kinetics and isotherms of the adsorption process well. In addition, the thermodynamic data indicated that the uptake process was spontaneous and endothermic. Altogether, this research enriched the Ce(III) trapping agent and provided a new method for the removal rare earth pollutants.

Adsorption of cerium (III) by zeolites synthesized from kaolinite after rare earth elements (REEs) recovery

REE recovery tests were performed on a kaolinite and the corresponding metakaolinite using pH static leaching method. Test results show that over 90% of REEs were leached from the metakaolinite sample at pH 0.00 and 25 °C, while less than 2% of the major constituents were simultaneously extracted. Therefore, selective leaching of REEs from the metakaolinite was achieved through pH static leaching. The leaching residue was then subjected to alkaline activation for zeolites synthesis. The effects of hydrothermal temperature and incubation period under various alkaline conditions on the synthesis of zeolites were systematically investigated. The phase compositions, textual properties, and morphology of the synthesized products were characterized. Pure zeolite A with 100% relative crystallinity was successfully synthesized at 80 °C for 6 h when using 3 M NaOH as the alkaline activator. While as the synthesis conditions became increasingly harsh, the metastable zeolite A gradually transformed into more stable sodalite, and three types of zeolites, including zeolite A, sodalite, and their mixtures, were obtained. After that, various types of zeolites were applied for Ce³⁺ adsorption from aqueous solutions. High purity sodalite showed a higher adsorption capacity of 53 mg/g at pH 6.0 and 25 °C as a result of the superior textual properties compared with zeolite A. The adsorption data were suitably fitted by the Langmuir isotherm and pseudo-second-order models. Findings from this study suggest that the kaolinite is a potential source for REE recovery, and the leaching residue is suitable for the synthesis of zeolites, which can be used as promising adsorbents for Ce³⁺ recovery.

Sandwich-like photocatalyst MIL-101@TiO2@PDVB with water resistance for efficient oxidation of toluene

The coordination of H₂O with the metal nodes of MOFs destroys the framework of MOFs, which severely inhibits the application of MOFs in the actual environment. In this work, sandwich-like MIL-101@TiO₂@PDVB composite was synthesized by in-situ hydrothermal and thermal deposition methods and used for the photocatalytic oxidation of toluene under high humidity. The result showed that the composite material had outstanding hydrophobic property with a water contact angle of 142.5°. When relative humidity (RH) was 60%, MIL-101@TiO₂@PDVB and MIL-101@TiO₂ exhibited an excellent photocatalytic activity for toluene degradation. When RH was 90%, the photocatalytic activity of MIL-101@TiO₂ was severely inhibited, while MIL-101@TiO₂@PDVB showed high resistance to water. The semi-encapsulated form of PDVB effectively resisted the erosion of H₂O while providing enough ·OH, and ensured the effective contact between the composites and toluene molecules. MIL-101@TiO₂@PDVB also exhibited remarkable adsorption-photocatalytic performance in the degradation of liquid phase organic pollutant. MIL-101@TiO₂@PDVB maintained high stability in long-term alkali resistance experiment and cyclic reaction test. This work provided new insights for the preparation of hydrophobic MOFs based functional materials and their applications for photocatalytic purification of VOCs.

Urchin-like structured magnetic hydroxyapatite for the selective separation of cerium ions from aqueous solutions

In this study, bio-inspired urchin-like structured hydroxyapatite (UHdA) and its magnetic composite (UHdA@Fe₃O₄) were developed for efficient and easy separation of cerium ions (Ce³⁺) from aquatic waste streams. UHdA and UHdA@Fe₃O₄ exhibited superior Ce³⁺ adsorption capacities of 248.39 and 230.01 mg/g-UHdA respectively, compared to a commercial HdA (141.71 mg/g-HdA) due to their hierarchical mesoporous structure and large specific surface area. The adsorption of Ce³⁺ to UHdA and UHdA@Fe₃O₄ were heterogeneous, pseudo-second-order-kinetic, and the rate-limiting step was external mass transfer and intra-particle diffusion. Moreover, thermodynamic studies revealed that the adsorption process was spontaneous and endothermic nature. The high selectivity towards Ce³⁺ in multi-ionic systems is attributed to the strong affinity between strong Lewis acid (Ce³⁺) and base (PO₄^3- and OH^-) interactions. XRD, FTIR, and XPS analysis demonstrated that the adsorption was mainly attributable to the ion exchange of Ce³⁺ with Ca²⁺ and to surface complexation. The desorption of Ce³⁺ was efficiently accomplished using 0.1 M HNO₃. The results suggest that UHdA and UHdA@Fe₃O₄ could be promising choices for the adsorption and recovery of rare earth elements.

A nanoreactor boosts chemodynamic therapy and ferroptosis for synergistic cancer therapy using molecular amplifier dihydroartemisinin

Background

Chemodynamic therapy (CDT) relying on intracellular iron ions and H₂O₂ is a promising therapeutic strategy due to its tumor selectivity, which is limited by the not enough metal ions or H₂O₂ supply of tumor microenvironment. Herein, we presented an efficient CDT strategy based on Chinese herbal monomer-dihydroartemisinin (DHA) as a substitute for the H₂O₂ and recruiter of iron ions to amplify greatly the reactive oxygen species (ROS) generation for synergetic CDT-ferroptosis therapy.

Results

The DHA@MIL-101 nanoreactor was prepared and characterized firstly. This nanoreactor degraded under the acid tumor microenvironment, thereby releasing DHA and iron ions. Subsequent experiments demonstrated DHA@MIL-101 significantly increased intracellular iron ions through collapsed nanoreactor and recruitment effect of DHA, further generating ROS thereupon. Meanwhile, ROS production introduced ferroptosis by depleting glutathione (GSH), inactivating glutathione peroxidase 4 (GPX4), leading to lipid peroxide (LPO) accumulation. Furthermore, DHA also acted as an efficient ferroptosis molecular amplifier by direct inhibiting GPX4. The resulting ROS and LPO caused DNA and mitochondria damage to induce apoptosis of malignant cells. Finally, in vivo outcomes evidenced that DHA@MIL-101 nanoreactor exhibited prominent anti-cancer efficacy with minimal systemic toxicity.

Conclusion

In summary, DHA@MIL-101 nanoreactor boosts CDT and ferroptosis for synergistic cancer therapy by molecular amplifier DHA. This work provides a novel and effective approach for synergistic CDT-ferroptosis with Chinese herbal monomer-DHA and Nanomedicine.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01455-0.

Phosphonomethyl iminodiacetic acid functionalized metal organic framework supported PAN composite beads for selective removal of La(III) from wastewater: Adsorptive performance and column separation studies

The rare earth elements being toxic in nature are being accumulated in water bodies as their industrial usage is growing exponentially, thus their efficient separation holds an immense significance. Herein, ligand functionalized metal organic framework (MOF), Phosphonomethyl iminodiacetic acid coordinated at Fe-BTC, was synthesized post-synthetically and incorporated subsequently in polyacrylonitrile polymer to prepare the composite beads via nonsolvent induced-phase-inversion technique for selective adsorption of La(III) from the wastewater in batch and dynamic column mode. XPS NMR, and FTIR were used to establish the interaction between functionalized ligand and unsaturated metal nodes of MOF. The adsorption capacity was 232.5 mg/g and 77.51 mg/g at 298 K of the functionalized MOF and composite beads respectively. Adsorption kinetics followed a pseudo-second order rate equation, and isotherm indicated the best fitting with Langmuir model. The dynamic behavior of the adsorption column packed with MOF/Polymer beads was fairly described by the Thomas model. The breakthrough time of 23.2 h could be attained with 12 cm of bed height and 10 ml/min of flow rate. These MOF/Polymer beads shown the selectivity of La over transitional metals were recycled over 5 times with about 15% loss of adsorption capacity. The findings provide suggestive insights of the potential use of functionalized MOF towards the separation of the rare earth element.

Critical review of functionalized silica sorbent strategies for selective extraction of rare earth elements from acid mine drainage

The ubiquitous and growing global reliance on rare earth elements (REEs) for modern technology and the need for reliable domestic sources underscore the rising trend in REE-related research. Adsorption-based methods for REE recovery from liquid waste sources are well-positioned to compete with those of solvent extraction, both because of their expected lower negative environmental impact and simpler process operations. Functionalized silica represents a rising category of low cost and stable sorbents for heavy metal and REE recovery. These materials have collectively achieved high capacity and/or high selective removal of REEs from ideal solutions and synthetic or real coal wastewater and other leachate sources. These sorbents are competitive with conventional materials, such as ion exchange resins, activated carbon; and novel polymeric materials like ion-imprinted particles and metal organic frameworks (MOFs). This critical review first presents a data mining analysis for rare earth element recovery publications indexed in Web of science, highlighting changes in REE recovery research foci and confirming the sharply growing interest in functionalized silica sorbents. A detailed examination of sorbent formulation and operation strategies to selectively separate heavy (HREE), middle (MREE), and light (LREE) REEs from the aqueous sources is presented. Selectivity values for sorbents were largely calculated from available figure data and gauged the success of the associated strategies, primarily: (1) silane-grafted ligands, (2) impregnated ligands, and (3) bottom-up ligand/silica hybrids. These were often accompanied by successful co-strategies, especially bite angle control, site saturation, and selective REE elution. Recognizing the need to remove competing fouling metals to achieve purified REE "baskets," we highlight techniques for eliminating these species from acid mine drainage (AMD) and suggest a novel adsorption-based process for purified REE extraction that could be adapted to different water systems.

Highly efficient recovery of heavy rare earth elements by using an amino-functionalized magnetic graphene oxide with acid and base resistance

In the application of various magnetic materials for water treatment, control of surface resistance to acid and alkali corrosion remains largely overlooked, which could greatly extend their service life. We herein prepare amino grafted magnetic graphene oxide composites using a simple one-step cross-link reaction between the graphene oxide and magnetic Fe₃O₄/C nanoparticles. The as-prepared magnetic graphene oxide composites have long-term stability under acid and alkali solutions and shows an excellent performance in removing Ho(III), a representative rare earth element (REE) from water. The observed adsorption capacity of 72.1 mg Ho(III)/g exceeded that of most magnetic materials previously reported. Regeneration of the magnetic composites was realized in acid and alkali solutions but their structural integrity and physicochemical properties retained even after 18 adsorption-desorption cycles. The current adsorbent also shows excellent adsorption performance for other heavy REEs, such as Er(III), Eu(III), Lu(III), Tm(III), Y(III) and Yb(III). This work can provide a new strategy for constructing an acid and base resistance magnetic graphene oxide for the high-efficient recovery of heavy REEs from aqueous solution.

Novel benzylphosphate-based covalent porous organic polymers for the effective capture of rare earth elements from aqueous solutions

It has been a major challenge to develop stable and cost-effective porous materials that efficiently recover heavy rare earth elements (HREEs) due to ever-increasing demand, low availability and high cost of HREEs. This study presents two novel benzylphosphate-based covalent porous organic polymers (BPOP-1 and BPOP-2) that were prepared by facile one-pot Friedel-Crafts reactions. Various analytical techniques are used to investigate the successful syntheses of BPOP materials and establish their material properties, which include an unusual crystalline nature, large surface area, hierarchical pore structure, and superior chemical stabilities. The BPOPs effectively adsorb, and thus remove HREEs from aqueous media. In particular, BPOP-1 had higher phosphate content and exhibits superior adsorption capacities (Eu³⁺: 289.5; Gd³⁺: 292.7; Tb³⁺: 294.4; Dy³⁺: 301.9 mg/g) than BPOP-2, while BPOP-2 had higher mesoporosity and correspondingly supports faster adsorption kinetics. Remarkably, both BPOP materials exhibit some of the highest HREE adsorption capacities reported to date, the selective capture of Dy³⁺ ions, and excellent cyclic adsorption/desorption properties. We provide a potential adsorption mechanism for Dy³⁺ capture by the BPOP adsorbent. These demonstrate that introducing phosphate functionality into a robust porous polymer backbone with high surface area is a promising strategy for selective HREEs capture from wastewater.

Effective recovery of ytterbium through biosorption using crosslinked sericin-alginate beads: A complete continuous packed-bed column study

The recovery of rare-earth from secondary sources is essential for cleaner production. The development of natural biocomposites is promising for this purpose. Sericin is a waste protein from silk manufacturing. The highly polar groups on the surface of sericin facilitate blending and crosslinking with other polymers to produce biocomposites with improved properties. In this work, we investigate ytterbium recovery onto a natural biocomposite based on sericin/alginate/poly(vinyl alcohol) (SAPVA) in packed-bed column, aiming to establish a profitable application for sericin. Effects of flow rate and ytterbium inlet concentration showed that the highest exhaustion biosorption capacity (128.39 mg/g) and lowest mass transfer zone (4.13 cm) were reached under the operating conditions of 0.03 L/h and 87.95 mg/L. Four reusability cycles were performed under the optimum operating conditions using 0.3 mol/L HNO₃. Ytterbium recovery was highly successful; desorption efficiency was higher than 97% and a final ytterbium-rich concentrate (3870 mg/L) was 44 times higher than input concentration. Regenerated beads characterization showed that the cation exchange mechanism plays a major function in continuous biosorption of ytterbium. SAPVA beads also showed higher biosorption/desorption performance for ytterbium than other competing ions. These results suggest the application of SAPVA may be an alternative for large-scale ytterbium recovery.

Postsynthetic of MIL-101-NH2 MOFs supported on PVDF membrane for REEs recovery from waste phosphor

With the increasing demand for rare earth elements (REEs) due to their wide application in high technology, their recovery and separation from waste sources has gradually come onto the agenda. Herein, a new kind of MIL-101-NH₂ (M1N) MOF functionalized with diethanol anhydride (DGA) incorporated into a polyvinylidene fluoride (PVDF) membrane (DGA-M1N@PVDF) has been fabricated for the sorption of REEs from a simulated acid leaching solution of waste phosphor, which contains a large amount of REEs. FTIR, TGA, XRD, fluorescence spectra and XPS analysis were used to characterize the synthesized composite membrane. Batch tests were employed to determine the optimal sorption conditions for Y and Eu adsorbed on DGA-M1N@PVDF adsorbent, such as pH (1–5), content of M1N MOFs (0–40 wt%), contact time (10–180 min) and ion concentration (0–20 mg L⁻¹). Maximum adsorption capacities for Y and Eu on DGA-M1N@PVDF reached 991.7 μg g⁻¹ and 98.76 μg g⁻¹ for trace REE solution, respectively. Moreover, a pseudo-second-order kinetic model accurately described the sorption process, and the plotted isothermal data indicated that the Langmuir model was more suitable than the Freundlich model for Y and Eu sorption with monolayer and chemical adsorption. Meanwhile, FTIR and XPS analyses revealed that the Y and Eu adsorption on the DGA-M1N@PVDF composite membrane was mainly caused by the N and O atoms of the –CONH or –COOH groups coordinated with metal ions. Furthermore, after five cycles, the recovery efficiency by DGA-M1N@PVDF for REEs remains above 82% and the XRD patterns were consistent with the original sample, which implied that the DGA-M1N@PVDF membrane has preferable stability, recyclability and good efficiency in REE separation from waste phosphor solutions.

A new kind DGA modified MIL-101-NH₂ MOFs supported on PVDF composite membrane (DGA-M1N@PVDF) was synthesized, which had superior selectivity, good adsorption capacity and good recycling performance on REEs in waste phosphor.

Artificial intelligence (AI) applications in adsorption of heavy metals using modified biochar

The process of removal of heavy metals is important due to their toxic effects on living organisms and undesirable anthropogenic effects. Conventional methods possess many irreconcilable disadvantages pertaining to cost and efficiency. As a result, the usage of biochar, which is produced as a by-product of biomass pyrolysis, has gained sizable traction in recent times for the removal of heavy metals. This review elucidates some widely recognized harmful heavy metals and their removal using biochar. It also highlights and compares the variety of feedstock available for preparation of biochar, pyrolysis variables involved and efficiency of biochar. Various adsorption kinetics and isotherms are also discussed along with the process of desorption to recycle biochar for reuse as adsorbent. Furthermore, this review elucidates the advancements in remediation of heavy metals using biochar by emphasizing the importance and advantages in the usage of machine learning (ML) and artificial intelligence (AI) for the optimization of adsorption variables and biochar feedstock properties. The usage of AI and ML is cost and time-effective and allows an interdisciplinary approach to remove heavy metals by biochar.