Graphene-based Nanomaterials in Fighting the Most Challenging Viruses and Immunogenic Disorders

Novel cobalt-based aerogels for uric acid detection in fluids at physiological pH

A sensor for uric acid (UA) based on the urate oxidase enzyme (UOx) immobilized in novel Co-based aerogels with transition metals synthesized by the sol-gel method was developed and evaluated. The Co-based aerogels: Co, Ni-Co and Pd-Co were physicochemically characterized by XRD and HR-TEM. The surface area values of 53, 57 and 66 m2 g-1 were determined for Co, Ni-Co and Pd-Co, respectively by N2 adsorption-desorption technique. Co-based aerogels were mixed by cross-linking with UOx enzymes and electrochemically characterized in buffers at pH 7.4 and 5.6 (pH values reported for biological fluids such as blood and sweat) in the presence of different uric acid concentrations. Co-based aerogels with UOx showed improved performance as a uric acid biosensor compared to using the enzyme alone. At a pH of 7.4, a higher sensitivity of 11 μA μM-1 was obtained with Pd-Co/UOx, 1.6 times higher than with UOx. At a pH value of 5.6, the highest sensitivity is achieved with Ni-Co/UOx. Stability and selectivity tests were performed in the presence of biological interferents without significant changes in the sensor. These results indicate a pleasing synergistic activity between Co-based aerogels and the enzyme.

Occupational agents-mediated asthma: From the perspective of autophagy

Occupational asthma (OA) is a common occupational pulmonary disease that is frequently underdiagnosed and underreported. The complexity of diagnosing and treating OA creates a significant social and economic burden, making it an important public health issue. In addition to avoiding allergens, patients with OA require pharmacotherapy; however, new therapeutic targets and strategies need further investigation. Autophagy may be a promising intervention target, but there is a lack of relevant studies summarizing the role of autophagy in OA. In this review consolidates the current understanding of OA, detailing principal and novel agents responsible for its onset. Additionally, we summarize the mechanisms of autophagy in HMW and LMW agents induced OA, revealing that occupational allergens can induce autophagy disorders in lung epithelial cells, smooth muscle cells, and dendritic cells, ultimately leading to OA through involving inflammatory responses, oxidative stress, and cell death. Finally, we discuss the prospects of targeting autophagy as an effective strategy for managing OA and even steroid-resistant asthma, encompassing autophagy interventions focused on organoids, organ-on-a-chip systems, nanomaterials vehicle, and nanobubbles; developing combined exposure models, and the role of non-classical autophagy in occupational asthma. In briefly, this review summarizes the role of autophagy in occupational asthma, offers a theoretical foundation for OA interventions based on autophagy, and identifies directions and challenges for future research.

Nanotechnology in healthcare, and its safety and environmental risks

Nanotechnology holds immense promise in revolutionising healthcare, offering unprecedented opportunities in diagnostics, drug delivery, cancer therapy, and combating infectious diseases. This review explores the multifaceted landscape of nanotechnology in healthcare while addressing the critical aspects of safety and environmental risks associated with its widespread application. Beginning with an introduction to the integration of nanotechnology in healthcare, we first delved into its categorisation and various materials employed, setting the stage for a comprehensive understanding of its potential. We then proceeded to elucidate the diverse healthcare applications of nanotechnology, spanning medical diagnostics, tissue engineering, targeted drug delivery, gene delivery, cancer therapy, and the development of antimicrobial agents. The discussion extended to the current situation surrounding the clinical translation and commercialisation of these cutting-edge technologies, focusing on the nanotechnology-based healthcare products that have been approved globally to date. We also discussed the safety considerations of nanomaterials, both in terms of human health and environmental impact. We presented the in vivo health risks associated with nanomaterial exposure, in relation with transport mechanisms, oxidative stress, and physical interactions. Moreover, we highlighted the environmental risks, acknowledging the potential implications on ecosystems and biodiversity. Lastly, we strived to offer insights into the current regulatory landscape governing nanotechnology in healthcare across different regions globally. By synthesising these diverse perspectives, we underscore the imperative of balancing innovation with safety and environmental stewardship, while charting a path forward for the responsible integration of nanotechnology in healthcare.

Antiviral Activity of Graphene Oxide-Silver Nanocomposites Against Murine Betacoronavirus

Background

The high infectivity of coronaviruses has led to increased interest in developing new strategies to prevent virus spread. Silver nanoparticles (AgNPs) and graphene oxide (GO) have attracted much attention in the antiviral field. We investigated the potential antiviral activity of GO and AgNPs combined in the nanocomposite GO-Ag against murine betacoronavirus MHV using an in vitro model.

Methods

GO, AgNPs, and GO-Ag characterization (size distribution, zeta potential, TEM visualization, FT-IR, and EDX analysis) and XTT assay were performed. The antiviral activity of GO-Ag nanocomposites was evaluated by RT-qPCR and TCID50 assays. The results were compared with free AgNPs and pure GO. Cell growth and morphology of MHV-infected hepatocytes treated with GO-Ag composites were analyzed by JuLI™Br. Immunofluorescence was used to visualize the cell receptor used by MHV. Ultrastructural SEM analysis was performed to examine cell morphology after MHV infection and GO-Ag composite treatment.

Results

A significant reduction in virus titer was observed for all nanocomposites tested, ranging from 3.2 to 7.3 log10 TCID50. The highest titer reduction was obtained for GO 5 µg/mL - Ag 25 µg/mL in the post-treatment method. These results were confirmed by RT-qPCR analysis. The results indicate that GO-Ag nanocomposites exhibited better antiviral activity compared to AgNPs and GO. Moreover, the attachment of AgNPs to the GO flake platform reduced their cytotoxicity. In addition, the GO-Ag composite modulates the distribution of the Ceacam1 cell receptor and can modulate cell morphology.

Conclusion

Graphene oxide sheets act as a stabilizing agent, inhibiting the accumulation of AgNPs and reducing their cellular toxicity. The GO-Ag composite can physically bind and inhibit murine betacoronavirus from entering cells. Furthermore, the constant presence of GO-Ag can inhibit MHV replication and significantly limit its extracellular release. In conclusion, GO-Ag shows promise as an antiviral coating on solid surfaces to minimize virus transmission and spread.

A Narrative Review on the Promising Potential of Graphene in Vaccine Design: Evaluating the Benefits and Drawbacks of Carbon Nanoplates in Nanovaccine Production

Graphene, a two-dimensional material consisting of a single layer of carbon atoms arranged in a honeycomb lattice, has shown great potential in various fields, including biomedicine. When it comes to vaccine development, graphene can offer several advantages due to its unique properties. Potential applications of graphene in vaccine development include improved vaccine delivery, adjuvant properties, improved vaccine stability, improved immune response, and biosensing capabilities. Although graphene offers many potential benefits in vaccine development, there are also some drawbacks and challenges associated with its use. Although graphene shows promising potential for vaccine development, overcoming the challenges and limitations associated with its use is critical to realizing its full potential in the field of immunization. Further research and development efforts are needed to overcome these drawbacks and take advantage of graphene for improved vaccine formulations. In this review, we focus on the advantages and disadvantages of graphene for vaccine development.

Alcohol-free synthesis, biological assessment, in vivo toxicological evaluation, and in silico analysis of novel silane quaternary ammonium compounds differing in structure and chain length as promising disinfectants

Quaternary ammonium compounds (QACs) are commonly used as disinfectants for industrial, medical, and residential applications. However, adverse health outcomes have been reported. Therefore, biocompatible disinfectants must be developed to reduce these adverse effects. In this context, QACs with various alkyl chain lengths (C12-C18) were synthesized by reacting QACs with the counterion silane. The antimicrobial activities of the novel compounds against four strains of microorganisms were assessed. Several in vivo assays were conducted on Drosophila melanogaster to determine the toxicological outcomes of Si-QACs, followed by computational analyses (molecular docking, simulation, and prediction of skin sensitization). The in vivo results were combined using a cheminformatics approach to understand the descriptors responsible for the safety of Si-QAC. Si-QAC-2 was active against all tested bacteria, with minimal inhibitory concentrations ranging from 13.65 to 436.74 ppm. Drosophila exposed to Si-QAC-2 have moderate-to-low toxicological outcomes. The molecular weight, hydrophobicity/lipophilicity, and electron diffraction properties were identified as crucial descriptors for ensuring the safety of the Si-QACs. Furthermore, Si-QAC-2 exhibited good stability and notable antiviral potential with no signs of skin sensitization. Overall, Si-QAC-2 (C14) has the potential to be a novel disinfectant.

Rapid assays of SARS-CoV-2 virus and noble biosensors by nanomaterials

The COVID-19 outbreak caused by SARS-CoV-2 in late 2019 has spread rapidly across the world to form a global epidemic of respiratory infectious diseases. Increased investigations on diagnostic tools are currently implemented to assist rapid identification of the virus because mass and rapid diagnosis might be the best way to prevent the outbreak of the virus. This critical review discusses the detection principles, fabrication techniques, and applications on the rapid detection of SARS-CoV-2 with three categories: rapid nuclear acid augmentation test, rapid immunoassay test and biosensors. Special efforts were put on enhancement of nanomaterials on biosensors for rapid, sensitive, and low-cost diagnostics of SARS-CoV-2 virus. Future developments are suggested regarding potential candidates in hospitals, clinics and laboratories for control and prevention of large-scale epidemic.

Potential of Zinc Oxide-Graphene Quantum Dots and Zinc Oxide-Nitrogen-Doped Graphene Quantum Dot Nanocomposites as Neurotrophic Agents

Over the past few decades, zinc oxide nanoparticles have also proven to be essential to a variety of scientific research sectors, including antimicrobial therapy, tissue engineering, bioimaging, biosensors, drug delivery, gene delivery, and bioimaging. There is an urgent need to establish and develop unique alternative treatment modalities to treat neurodegenerative disorders due to the shortcomings of the existing drugs. As a possible therapy for brain diseases and disorders, the ability of the nanoparticles to cross the blood-brain barrier (BBB) as well as their reduced toxicity, solubility, and biodegradability has lately attracted attention. Scientists are quietly turning their attention to develop green synthesis of nanoparticles as an alternative to the physical and chemical techniques of producing the same. Existing literature has emphasized the use of ZnO for the potential treatment of cerebral ischemia and its neuroprotective properties. This work discusses the potential of ZnO prepared using Gynura cusimba extract and its nanocomposites with graphene quantum dots (GQDs) and its nitrogen doped variant, N-GQDs as neurotrophic agents, in accordance with our previous report on the use of GQDs and N-GQDs as neurotrophic agents. Pristine ZnO nanoparticles as well as composites were duly characterized by using several techniques to confirm the formation of the nanocomposites. Biological evaluation using the neurite outgrowth assay following the cell viability assay revealed that incorporation of GQDs and N-GQDs enhanced the neurite length in comparison to that of pristine ZnO with the nanocomposites of N-GQDs showing comparatively better results, corroborated by the real-time PCR studies as well.

The applications of functional materials-based nano-formulations in the prevention, diagnosis and treatment of chronic inflammation-related diseases

Chronic inflammation, in general, refers to systemic immune abnormalities most often caused by the environment or lifestyle, which is the basis for various skin diseases, autoimmune diseases, cardiovascular diseases, liver diseases, digestive diseases, cancer, and so on. Therapeutic strategies have focused on immunosuppression and anti-inflammation, but conventional approaches have been poor in enhancing the substantive therapeutic effect of drugs. Nanomaterials continue to attract attention for their high flexibility, durability and simplicity of preparation, as well as high profitability. Nanotechnology is used in various areas of clinical medicine, such as medical diagnosis, monitoring and treatment. However, some related problems cannot be ignored, including various cytotoxic and worsening inflammation caused by the nanomaterials themselves. This paper provides an overview of functional nanomaterial formulations for the prevention, diagnosis and treatment of chronic inflammation-related diseases, with the intention of providing some reference for the enhancement and optimization of existing therapeutic approaches.

Biological Evaluation of Graphene Quantum Dots and Nitrogen-Doped Graphene Quantum Dots as Neurotrophic Agents

Over time, developments in nano-biomedical research have led to the creation of a number of systems to cure serious illnesses. Tandem use of nano-theragnostics such as diagnostic and therapeutic approaches tailored to the individual disease treatment is crucial for further development in the field of biomedical advancements. Graphene has garnered attention in the recent times as a potential nanomaterial for tissue engineering and regenerative medicines owing to its biocompatibility among the several other unique properties it possesses. The zero-dimensional graphene quantum dots (GQDs) and their nitrogen-doped variant, nitrogen-doped GQDs (N-GQDs), have good biocompatibility, and optical and physicochemical properties. GQDs have been extensively researched owing to several factors such as their size, surface charge, and interactions with other molecules found in biological media. This work briefly elucidates the potential of electroactive GQDs as well as N-GQDs as neurotrophic agents. In vitro investigations employing the N2A cell line were used to evaluate the effectiveness of GQDs and N-GQDs as neurotrophic agents, wherein basic investigations such as SRB assay and neurite outgrowth assay were performed. The results inferred from immunohistochemistry followed by confocal imaging studies as well as quantitative real-time PCR (qPCR) studies corroborated those obtained from neurite outgrowth assay. We have also conducted a preliminary investigation of the pattern of gene expression for neurotrophic and gliotrophic growth factors using ex vivo neuronal and mixed glial cultures taken from the brains of postnatal day 2 mice pups. Overall, the studies indicated that GQDs and N-GQDs hold prospect as a framework for further development of neuroactive compounds for relevant central nervous system (CNS) purposes.

Repair of critical-sized bone defects in rabbit femurs using graphitic carbon nitride (g-C3N4) and graphene oxide (GO) nanomaterials

Various biomaterials have been evaluated to enhance bone formation in critical-sized bone defects; however, the ideal scaffold is still missing. The objective of this study was to investigate the in vitro and in vivo regenerative capacity of graphitic carbon nitride (g-C₃N₄) and graphene oxide (GO) nanomaterials to stimulate critical-sized bone defect regeneration. The in vitro cytotoxicity and hemocompatibility of g-C₃N₄ and GO were evaluated, and their potential to induce the in vitro osteogenesis of human fetal osteoblast (hFOB) cells was assessed using qPCR. Then, bone defect in femoral condyles was created in rabbits and left empty as control or filled with either g-C₃N₄ or GO. The osteogenesis of the different implanted scaffolds was evaluated after 4, 8, and 12 weeks of surgery using X-ray, computed tomography (CT), macro/microscopic examinations, and qPCR analysis of osteocalcin (OC) and osteopontin (OP) expressions. Both materials displayed good cell viability and hemocompatibility with enhanced collagen type-I (Col-I), OC, and OP expressions of the hFOB cells. Compared to the control group, the bone healing process in g-C₃N₄ and GO groups was promoted in vivo. Moreover, complete healing of the bone defect was observed radiologically and grossly in g-C₃N₄ implanted group. Additionally, g-C₃N₄ implanted group showed higher percentages of osteoid tissue, mature collagen, biodegradation, and expressions of OC and OP. In conclusion, our results revealed that g-C₃N₄ and GO nanomaterials could induce osteogenesis in critical-sized bone defects.

Graphene@Curcumin-Copper Paintable Coatings for the Prevention of Nosocomial Microbial Infection

The rise of antimicrobial resistance has brought into focus the urgent need for the next generation of antimicrobial coating. Specifically, the coating of suitable antimicrobial nanomaterials on contact surfaces seems to be an effective method for the disinfection/contact killing of microorganisms. In this study, the antimicrobial coatings of graphene@curcumin-copper (GN@CR-Cu) were prepared using a chemical synthesis methodology. Thus, the prepared GN@CR-Cu slurry was successfully coated on different contact surfaces, and subsequently, the GO in the composite was reduced to graphene (GN) by low-temperature heating/sunlight exposure. Scanning electron microscopy was used to characterize the coated GN@CR-Cu for the coating properties, X-ray photon scattering were used for structural characterization and material confirmation. From the morphological analysis, it was seen that CR and Cu were uniformly distributed throughout the GN network. The nanocomposite coating showed antimicrobial properties by contact-killing mechanisms, which was confirmed by zone inhibition and scanning electron microscopy. The materials showed maximum antibacterial activity against E. coli (24 ± 0.50 mm) followed by P. aeruginosa (18 ± 0.25 mm) at 25 µg/mL spot inoculation on the solid media plate, and a similar trend was observed in the minimum inhibition concentration (80 µg/mL) and bactericidal concentration (160 µg/mL) in liquid media. The synthesized materials showed excellent activity against E. coli and P. aeruginosa. These materials, when coated on different contact surfaces such medical devices, might significantly reduce the risk of nosocomial infection.

Integrating FTIR 2D correlation analyses, regular and omics analyses studies on the interaction and algal toxicity mechanisms between graphene oxide and cadmium

Graphene oxide (GO, a popular 2D graphene-based nanomaterial) has developed quickly and has received considerable attention for its applications in environmental protection and pollutant removal. However, significant knowledge gaps still exist about the interaction characteristic and joint toxicity mechanism of GO and cadmium (Cd) on aquatic organisms. In this study, GO showed a high adsorption capacity (120. 6 mg/g) and strong adsorption affinity (K_L = 0.85 L/mg) for Cd²⁺. Integrating multiple analytical methods (e.g., electron microscopy, Raman spectra, and 2D correlation spectroscopy) revealed that Cd²⁺ is uniformly adsorbed on the GO surface and edge mainly through cation-π interactions. The combined ecological effects of GO and Cd²⁺ on Chlorella vulgaris were observed. Cd²⁺ induced more severe growth inhibition, photosynthesis toxicity, ultrastructure damage and plasmolysis than GO. Interestingly, we found that GO nanosheets could augment the algal toxicity of Cd²⁺ (e.g., chlorophyll b, mitochondrial membrane damage, and uptake). Transcriptomics and metabolomics further explained the underlying mechanism. The results indicated that the regulation of PSI-, PSII-, and metal transport-related genes (e.g., ABCG37 and ZIP4) and the inhibition of metabolic pathways (e.g., amino acid, fatty acid, and carbohydrate metabolism) were responsible for the persistent phytotoxicity. The present work provides mechanistic insights into the roles of coexisting inorganic pollutants on the environmental fate and risk of GO in aquatic ecosystems.

SARS-COV-2 infection and Parkinson's disease: Possible links and perspectives

Parkinson's disease (PD) is a neurodegenerative disorder characterized by the progressive loss of dopaminergic neurons in the substantia nigra. The hallmarks are the presence of Lewy bodies composed mainly of aggregated α-synuclein and immune activation and inflammation in the brain. The neurotropism of SARS-CoV-2 with induction of cytokine storm and neuroinflammation can contribute to the development of PD. Interestingly, overexpression of α-synuclein in PD patients may limit SARS-CoV-2 neuroinvasion and degeneration of dopaminergic neurons; however, on the other hand, this virus can speed up the α-synuclein aggregation. The review aims to discuss the potential link between COVID-19 and the risk of PD, highlighting the need for further studies to authenticate the potential association. We have also overviewed the influence of SARS-CoV-2 infection on the PD course and management. In this context, we presented the prospects for controlling the COVID-19 pandemic and related PD cases that, beyond global vaccination and novel anti-SARS-CoV-2 agents, may include the development of graphene-based nanoscale platforms offering antiviral and anti-amyloid strategies against PD.

Antibacterial Nanomaterials: Mechanisms, Impacts on Antimicrobial Resistance and Design Principles

Antimicrobial resistance (AMR) is one of the biggest threats to the environment and health. AMR rapidly invalidates conventional antibiotics, and antimicrobial nanomaterials have been increasingly explored as alternatives. Interestingly, several antimicrobial nanomaterials show AMR-independent antimicrobial effects without detectable new resistance and have therefore been suggested to prevent AMR evolution. In contrast, some are found to trigger the evolution of AMR. Given these seemingly conflicting findings, a timely discussion of the two faces of antimicrobial nanomaterials is urgently needed. This review systematically compares the killing mechanisms and structure-activity relationships of antibiotics and antimicrobial nanomaterials. We then focus on nano-microbe interactions to elucidate the impacts of molecular initiating events on AMR evolution. Finally, we provide an outlook on future antimicrobial nanomaterials and propose design principles for the prevention of AMR evolution.

Advances in graphene-based nanoplatforms and their application in Parkinson's disease

Graphene and GBNs offer diverse PD management modalities by targeting neurodegeneration, exerting regenerative properties and their use as carriers, biosensors, and imaging agents.

Spinel ZnCr2O4 nanorods synthesized by facile sol-gel auto combustion method with biomedical properties

In this study, spinel zinc chromite nanorods (ZnCr₂O₄ NRs) were successfully manipulated by a simple sol-gel auto combustion process employing urea as fuel. The sample was only required to sinter at 500 °C for 2 h to obtain the single crystalline phase. The phase formation, crystallinity, and surface topography of synthesized ZnCr₂O₄ NRs were explored by X-ray diffraction (XRD), UV-Vis reflectance spectroscopy (UVDRS), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray (EDX) spectroscopy, and vibrating sample magnetometry (VSM). XRD analysis confirms the formation of spinel ZnCr₂O₄ NRs. The FTIR spectrum displays the two vibrational peaks of Cr-O, and Zn-O at 489 and 615 cm^-1, correspondingly. These vibrational bonds were correlated with ZnCr₂O₄ and revealed the production of cubic spinel ZnCr₂O₄ NRs. FESEM indicates the presence of hexagonal-rod-shaped particles. EDX spectrum demonstrates the elemental composition of the ZnCr₂O₄ NRs and confirms the primary peak of Zn, Cr, and O. The obtained ZnCr₂O₄ NRs exhibit an antiferromagnetic behavior. The bandgap energy of ZnCr₂O₄ NRs was ascertained and was shown to be 3.45 eV. Furthermore, the antifungal and antibacterial effect of ZnCr₂O₄ NRs was examined against pathogenic strains by disc diffusion technique. Besides these, the antimalarial activity of ZnCr₂O₄ NRs was studied against Plasmodium falciparum. Thus, the as-synthesized ZnCr₂O₄ NRs showed significant antibacterial, antifungal and antimalarial activity and may be helpful for research opening a novel horizon in nanomedicine. Graphical abstract.

Metallic and non-metallic nanoparticles from plant, animal, and fisheries wastes: potential and valorization for application in agriculture

Global agriculture is facing tremendous challenges due to climate change. The most predominant amongst these challenges are abiotic and biotic stresses caused by increased incidences of temperature extremes, drought, unseasonal flooding, and pathogens. These threats, mostly due to anthropogenic activities, resulted in severe challenges to crop and livestock production leading to substantial economic losses. It is essential to develop environmentally viable and cost-effective green processes to alleviate these stresses in the crops, livestock, and fisheries. The application of nanomaterials in farming practice to minimize nutrient losses, pest management, and enhance stress resistance capacity is of supreme importance. This paper explores innovative methods for synthesizing metallic and non-metallic nanoparticles using plants, animals, and fisheries wastes and their valorization to mitigate abiotic and biotic stresses and input use efficiency in climate-smart and stress-resilient agriculture including crop plants, livestock, and fisheries.

A Protein Microarray-Based Respiratory Viral Antigen Testing Platform for COVID-19 Surveillance

High-throughput and rapid screening testing is highly desirable to effectively combat the rapidly evolving COVID-19 pandemic co-presents with influenza and seasonal common cold epidemics. Here, we present a general workflow for iterative development and validation of an antibody-based microarray assay for the detection of a respiratory viral panel: (a) antibody screening to quickly identify optimal reagents and assay conditions, (b) immunofluorescence assay design including signal amplification for low viral titers, (c) assay characterization with recombinant proteins, inactivated viral samples and clinical samples, and (d) multiplexing to detect a panel of common respiratory viruses. Using RT-PCR-confirmed SARS-CoV-2 positive and negative pharyngeal swab samples, we demonstrated that the antibody microarray assay exhibited a clinical sensitivity and specificity of 77.2% and 100%, respectively, which are comparable to existing FDA-authorized antigen tests. Moreover, the microarray assay is correlated with RT-PCR cycle threshold (Ct) values and is particularly effective in identifying high viral titers. The multiplexed assay can selectively detect SARS-CoV-2 and influenza virus, which can be used to discriminate these viral infections that share similar symptoms. Such protein microarray technology is amenable for scale-up and automation and can be broadly applied as a both diagnostic and research tool.

Bictegravir nanomicelles and anionic pullulan loaded vaginal film: Dual mechanistic pre-exposure prophylaxis (PrEP) for HIV

Locally delivered pre-exposure prophylaxis (PrEP) has proven to be a promising strategy to combat Human immunodeficiency virus (HIV) transmission but several findings encountered toxicities or proved to be marginally effective in clinical settings. Therefore, innovative, multifunctional, and safer alternatives are being progressively investigated. Herein, we explored negatively charged carbohydrate, anionic pullulan (AP) as a rapidly soluble film-former and novel anti-HIV agent. Additionally, Bictegravir (BCT), an HIV integrase inhibitor was co-delivered in the form of nanomicelles for sustained antiviral activity. BCT-loaded PLGA-PEG polymeric nanomicelles (BN) were incorporated into PVA/pullulan-based film matrix comprising of 2 % w/v AP (BN-AP film). In cell-based assays, biocompatibility and TEER values for BN-AP films were similar to control while the commercial vaginal contraceptive film (VCF®) showed severe cytotoxicity and drastically reduced the tight junction integrity. Rapid disintegration of BN-AP film with >85 % drug release was observed in simulated vaginal and seminal fluid. Most importantly, AP and BN-AP film significantly inhibited HIV-1 replication with IC₅₀ at as low as 91 μg/mL and 0.708 nM, respectively. Therefore, this study entails successful development of BN-AP film that functioned as an effective, biocompatible dual-acting PrEP formulation.

Nanomaterials for Photocatalytic Degradations of Analgesic, Mucolytic and Anti-Biotic/Viral/Inflammatory Drugs Widely Used in Controlling SARS-CoV-2

The COVID-19 pandemic has been transformed into one of the main worldwide challenges, in recent years. For controlling symptoms that are caused by this disease (e.g., chills or fever, shortness of breath and/or difficulty in breathing, cough, sore throat, fatigue, headache, muscle aches, the new loss of tastes and/or smells, congestion or runny nose, nausea, vomiting and/or diarrhea), lots of medicines including analgesics, mucolytics, and anti-biotic/viral/inflammatory drugs have been frequently prescribed. As these medicines finally contaminate terrestrial and aquatic habitats by entering surface waterways through pharmaceutical production and excreting trace amounts of waste after human usage, they have negative impacts on wildlife’s health and ecosystem. Residual drugs in water have the potential to harm aquatic creatures and disrupt their food chain as well as the breeding cycle. Therefore, proper degradation of these broadly used medicines is highly crucial. In this work, the use of nanomaterials applicable in photocatalytic degradations of analgesics (e.g., acetaminophen, aspirin, ibuprofen, and naproxen), mucolytics (e.g., ambroxol), antibiotics (e.g., azithromycin and quinolones including hydroxychloroquine and chloroquine phosphate), anti-inflammatory glucocorticoids (e.g., dexamethasone and cortisone acetate), antihistamines (e.g., diphenhydramine), H2 blockers (e.g., famotidine), anthelmintics (e.g., praziquantel), and finally antivirals (e.g., ivermectin, acyclovir, lopinavir/ritonavir, favipiravir, nitazoxanide, and remdesivir) which widely used in controlling/treating the coronavirus have been reviewed and discussed.

Advances in Biologically Applicable Graphene-Based 2D Nanomaterials

Climate change and increasing contamination of the environment, due to anthropogenic activities, are accompanied with a growing negative impact on human life. Nowadays, humanity is threatened by the increasing incidence of difficult-to-treat cancer and various infectious diseases caused by resistant pathogens, but, on the other hand, ensuring sufficient safe food for balanced human nutrition is threatened by a growing infestation of agriculturally important plants, by various pathogens or by the deteriorating condition of agricultural land. One way to deal with all these undesirable facts is to try to develop technologies and sophisticated materials that could help overcome these negative effects/gloomy prospects. One possibility is to try to use nanotechnology and, within this broad field, to focus also on the study of two-dimensional carbon-based nanomaterials, which have excellent prospects to be used in various economic sectors. In this brief up-to-date overview, attention is paid to recent applications of graphene-based nanomaterials, i.e., graphene, graphene quantum dots, graphene oxide, graphene oxide quantum dots, and reduced graphene oxide. These materials and their various modifications and combinations with other compounds are discussed, regarding their biomedical and agro-ecological applications, i.e., as materials investigated for their antineoplastic and anti-invasive effects, for their effects against various plant pathogens, and as carriers of bioactive agents (drugs, pesticides, fertilizers) as well as materials suitable to be used in theranostics. The negative effects of graphene-based nanomaterials on living organisms, including their mode of action, are analyzed as well.

An ultrasensitive electrochemical sensing platform based on silver nanoparticle-anchored 3D reduced graphene oxide for rifampicin detection

A facile strategy has been reported to anchor silver nanoparticles (Ag NPs) onto three-dimensional reduced graphene oxide (3D rGO) via a green and simple method. An accurate and reliable electrochemical sensing platform based on Ag NPs/3D rGO was designed for the ultrasensitive detection of rifampicin (RIF). The morphology and features of Ag NPs/3D rGO were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Raman spectroscopy and electrochemical measurements. The interface of the modified electrode presented effective electrical activity for the analysis of RIF due to the large electrochemically active surface area and excellent electron transport ability. The sensor exhibited a good linear relationship in the range of 0.01 nM-45 μM and a low detection limit of 0.810 nM (S/N = 3). Crucially, the fabricated Ag NPs/3D rGO sensor was successfully utilized to assess RIF in human blood, drug and aquatic product samples. This sensing platform exhibited outstanding electrochemical performance for RIF detection and showed great potential application in clinical diagnosis, pharmaceutical and food-related fields.

Non-Inferior Efficacy of Tenofovir Disoproxil to Tenofovir Disoproxil Fumarate in Virologically Suppressed Chronic Hepatitis B Patients

PURPOSE

Tenofovir disoproxil (TD), modified from tenofovir disoproxil fumarate (TDF), was developed as a salt-free formulation, removing fumarate to improve the ease of oral intake by reducing the tablet's size. We evaluated the maintenance of antiviral effects and overall safety profile of TD 245 mg after switching from TDF 300 mg in patients with chronic hepatitis B (CHB).

PATIENTS AND METHODS

CHB patients with HBV-DNA <69 IU/mL after ≥24 weeks of TDF therapy were enrolled. The primary efficacy endpoint was the HBV-DNA suppression rate (HBV-DNA <69 IU/mL) at week 48; We evaluated the non-inferiority (10% margin) of TD to TDF in terms of efficacy. Safety was assessed based on adverse events (AEs), laboratory tests, bone mineral density, and renal function abnormalities.

RESULTS

Overall, 189 subjects were randomized in a 2:1 ratio, and 117 and 66 subjects in the TD and TDF groups, respectively, completed the study. In the per-protocol set, the HBV-DNA suppression rate at week 48 was 99.1% and 100% in the TD and TDF groups, respectively. The lower limit of the 97.5% one-sided confidence interval for the intergroup difference in HBV-DNA suppression rate was -2.8%, which was greater than the prespecified margin of non-inferiority. The changes in creatinine clearance from baseline to week 48 was significantly less in the TD group and in the TDF group; -0.8 ± 9.8 versus -2.4 ± 12.8 mL/min, respectively (P=0.017).

CONCLUSION

TD was non-inferior to TDF for maintaining viral suppression in CHB patients, showing the less decline of renal function.