Mechanochemistry: A Force of Synthesis

Recent Progress in the Design and Application of Strong Metal-Support Interactions in Electrocatalysis

The strong metal-support interaction (SMSI) in supported metal catalysts represents a crucial factor in the design of highly efficient heterogeneous catalysts. This interaction can modify the surface adsorption state, electronic structure, and coordination environment of the supported metal, altering the interface structure of the catalyst. These changes serve to enhance the catalyst's activity, stability, and reaction selectivity. In recent years, a multitude of researchers have uncovered a range of novel SMSI types and induction methods including oxidized SMSI (O-SMSI), adsorbent-mediated SMSI (A-SMSI), and wet chemically induced SMSI (Wc-SMSI). Consequently, a systematic and critical review is highly desirable to illuminate the latest advancements in SMSI and to deliberate its application within heterogeneous catalysts. This article provides a review of the characteristics of various SMSI types and the most recent induction methods. It is concluded that SMSI significantly contributes to enhancing catalyst stability, altering reaction selectivity, and increasing catalytic activity. Furthermore, this paper offers a comprehensive review of the extensive application of SMSI in the electrocatalysis of hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and carbon dioxide reduction reaction (CO2RR). Finally, the opportunities and challenges that SMSI faces in the future are discussed.

Metal-Free C-X Functionalization in Solid-State via Photochemistry in Ball Mills

We report the first metal- and catalyst-free protocol for the facile cross-coupling of aryl halides towards C-B, C-P and C-S bonds under solid-state ball milling conditions via UV light irradiation. The reactions can be performed in the absence of bulk solvents at room temperature in a mixer mill, yielding up to 99 % and being tolerant towards various functionalized aryl halides (X=I or Br). Furthermore, we developed a novel photoreactor design increasing the light intensity. With this we could demonstrate that our protocol surpasses classical solvent based as well as purely mechanochemical approaches in terms of green metrics and energy efficiency.

Sustainable Ultrasound-Assisted Solid-Phase peptide synthesis (SUS-SPPS): Less Waste, more efficiency

The integration of low-frequency ultrasound with Solid-Phase Peptide Synthesis (SPPS) was explored to establish a Sustainable Ultrasound-assisted Solid-Phase Peptide Synthesis (SUS-SPPS) method. This innovative approach significantly reduces solvent consumption, washing steps, time, and reagent usage compared to conventional manual SPPS protocols. The SUS-SPPS method exploits ultrasound at every stage of synthesis and work-up, reducing the process to just two steps. The first step sequentially combines Fmoc-amino acid coupling, capping of unreacted amino groups, and Fmoc deprotection into a single operation, while the second one consists of a single washing procedure. Moreover, we demonstrated that the method is compatible with various resin types, including Rink-amide, Wang, and Cl-Trt resins, and facilitates the efficient synthesis of peptides of varying lengths (up to 20-mers) and compositions, including those traditionally considered "difficult sequences", with excellent yields and purity. Notably, SUS-SPPS reduces solvent usage per coupling cycle by 83-88%, marking a significant breakthrough in sustainable peptide synthesis.

Recent advances in the synthesis of anticancer pyrazole derivatives using microwave, ultrasound, and mechanochemical techniques

Pyrazole and its derivatives have attracted considerable attention in pharmaceutical and medicinal chemistry, as reflected in their presence in numerous FDA-approved drugs and clinical candidates. This review presents a comprehensive analysis of articles published between 2014 and 2024, focusing on the microwave-, ultrasound-, and mechanochemical-assisted synthesis of pyrazole derivatives with anticancer activity. It explores synthetic methodologies, anticancer efficacy, and molecular docking studies, underscoring the significance of pyrazole derivatives in drug discovery and medicinal chemistry. Notably, microwave irradiation stands out as the most widely employed technique, providing high efficiency by significantly reducing reaction times while maintaining moderate temperatures. Ultrasound irradiation serves as a valuable alternative, particularly for processes that require milder conditions, whereas mechanochemical activation, though less frequently employed, offers distinct advantages in terms of sustainability.

Mechanochemical Thiolation of α-Imino Ketones: A Catalyst-Free, One-Pot, Three-Component Reaction

Herein, we report an efficient mechanochemical synthesis of α,α-amino thioketones involving a one-pot, three-component milling of 2-oxo aldehydes, amines, and thiols. Unlike previous methods, this protocol does not require any catalyst or oxidizing additive. The reaction proceeds through the thiolation of in situ formed α-imino ketones by liquid-assisted grinding. We have successfully extended this protocol to synthesizing benzothiazoles, thiazoles, and quinoxalines, demonstrating its efficiency and potential in the field. Importantly, we have shown the gram-scale synthesis, synthetic applications, and substrate scope of this protocol, instilling confidence in its practicality.

Mechanochemically Synthesized PEG-OTs as a Green Corrosion Inhibitor

Polymer corrosion inhibitors are reported to form dense films on carbon steel surfaces, and their thermostability enables survival in harsh downhole environments. In this paper, PEG-OTs was synthesized by mechanochemistry using ball mill by grafting tosyl on PEG. Using this solvent-free green chemistry, non-toxic PEG and PEG-OTs with various molecular weights (600, 2000, and 10,000 g/mol) were prepared and used as corrosion inhibitors. The corrosion inhibition performance of 5 × 10-3 mol/L inhibitors on Q235 carbon steel in 0.5 M HCl solution was investigated using static weight-loss, electrochemical impedance spectroscopy, polarization curves, SEM, and contact angle measurements. The results show that, after modification, PEG-OTs has an elevated corrosion inhibition effect compared to PEG. A maximum of 90% corrosion inhibition efficiency was achieved using static weight-loss. The morphology study shows that a dense film formed to protect carbon steel. Thanks to their polymeric structure, a higher molecular weight leads to better corrosion inhibition.

Tuning of a Hydrogen-Bonded Organic Framework by Liquid-Assisted Mechanosynthesis between Trans-Aconitic Acid and Isonicotinamide

Cocrystallization of trans-aconitic acid (TACA) and isonicotinamide (INA) using liquid assisted mechanochemical grinding results in a unique supramolecular hydrogen-bonded organic framework (HOF) system encapsulating various organic solvents (liquid guest) with the formation of channel inclusion compounds. Dimension and shape of the framework is dependent on the solvent used during liquid assisted grinding (LAG). Although crystal structure of the cocrystal (TACA) ⋅ (INA)2 ⋅ (H2O)@(INA)0.5 has been determined by Single Crystal X-ray diffraction (SCXRD), crystal structures of 3 cocrystal HOFs were determined by microcrystal electron diffraction (MicroED) and synchrotron X-ray diffraction due to lack of suitable single crystal. PXRD analysis confirms isostructurality of various host-guest systems; whereas guest incorporation as well as stability of the HOFs were further confirmed using thermogravimetric analysis. This study demonstrates that the framework of HOFs can be tuned by varying solvent molecules used during LAG.

Chemical and Enzymatic Mechanosynthesis of Organocatalytic Peptide Materials Based on Proline and Phenylalanine

In recent years, mechanosynthesis of peptides through either chemical or enzymatic routes has been accomplished. In part, this advancement has been driven due to the organocatalytic properties of peptide-based biomaterials. In this work, we report the merging of chemical and enzymatic protocols under mechanochemical conditions to synthesize peptide materials based on L-proline and L-phenylalanine. Compared to traditional step-by-step peptide synthesis in solution, our mechanochemical approach combining peptide coupling reagents with the proteolytic enzyme papain offers a more sustainable route by reducing the number of synthetic steps, shortening reaction times, increasing chemical yields, and minimizing waste production. Notably, the mechanosynthesized peptides exhibited organocatalytic activity in the asymmetric aldol reaction between cyclohexanone and 4-nitrobenzaldehyde.

Simultaneous Cycloadditions in the Solid State via Supramolecular Assembly

Chemical reactions conducted in the solid phase (specifically, crystalline) are much less numerous than solution reactions, primarily due to reduced motion, flexibility, and reactivity. The main advantage of crystalline-state transformations is that reactant molecules can be designed to self-assemble into specific spatial arrangements, often leading to high control over product regiochemistry and/or stereochemistry. In crystalline-phase transformations, typically only one type of reaction occurs, and a sacrificial template molecule is frequently used to facilitate self-assembly, similar to a catalyst or enzyme. Here, we demonstrate the first system designed to undergo two chemically unique and orthogonal cycloaddition reactions simultaneously within a single crystalline solid. Well-controlled supramolecular self-assembly of two molecules containing different reactive moieties affords orthogonal reactivity without use of a sacrificial template. Using only UV light, the simultaneous [2+2] and [4+4] cycloadditions are achieved regiospecifically, stereospecifically, and products are obtained in high yield, whereas a simultaneous solution-state reaction affords a mixture of isomers in low yield. Application of dually-reactive systems toward (supra)molecular solar thermal storage materials is also discussed. This work demonstrates fundamental chemical approaches for orthogonal reactivity in the crystalline state and highlights the complexity and reversibility that can be achieved with supramolecular design.

Rapid and Green Anion-Assisted Mechanochemical Peptide Cyclization

A novel mechanochemical approach is described for chloride-templated head-to-tail macrocyclization of a pentapeptide and a hexapeptide. This straightforward method allows the solvent-free preparation of cyclopeptides with yields comparable to solution-based approaches without the need for high dilution of the reaction mixture and with significantly reduced reaction times and organic waste amount.

Mechanochemically facilitated silver-catalyzed direct H/D exchange on heteroarenes

Despite recent advances in H/D exchange, the effective deuteration of polyarenes remains challenging, due to their insolubility and hydrophobicity. This study presents a concept proofing of a mechanochemically facilitated direct H/D exchange. The silver-catalyzed deuteration of heteroarenes was promoted smoothly within 99 minutes of grinding, with heavy water as the deuterium source.

Low-energy photoredox catalysis

With the advent of photoredox catalysis, new synthetic paradigms have been established with many novel transformations being achieved. Nevertheless, modern photoredox chemistry has several drawbacks, namely, deficiencies in reaction efficiency and scalability. Furthermore, wavelengths of light in excess of the energy required for a chemical reaction are often used. In this Review, we document recent developments of low-energy light-absorbing catalysts and their cognate photochemical methods, advantageously mitigating off-cycle photochemical reactivity of excited-state species in the reaction mixture and improving batch scalability of photochemical reactions. Finally, developments in red-light photoredox catalysis are leading the next-generation applications to polymer science and biochemistry-chemical biology, enabling catalytic reactions within media composites - including mammalian tissue - that are historically recalcitrant with blue-light photoredox catalysis.

In Situ Encapsulation of Atomically Precise Nanoclusters in Reticular Frameworks via Mechanochemical Synthesis

The combination of atomically precise nanoclusters (APNCs) and reticular frameworks is promising for generating component-specific nanocomposites with emergent properties. However, traditional liquid-phase synthesis often hampers this potential by damaging APNCs and limiting combination diversity. Here, mechanochemical synthesis to explore the encapsulation of diverse oil- and water-soluble APNCs within various reticular frameworks is employed, establishing a database of 21 unique APNC-framework combinations, including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), hydrogen-bonded organic frameworks (HOFs), and multivariate MOFs. These framework coatings not only spatially immobilize APNCs but also secure their structures, preventing aggregation and degradation while enhancing stability and activity. Encapsulating Au25 in HOFs resulted in a remarkable 315-fold increase in catalytic activity compared to Au25 homogeneous catalyst, highlighting the framework's crucial role in catalytic enhancement. The mechanochemical synthesis strategy facilitates tailored support screening, catering to specific needs, and shows promise for developing multifunctional systems, including enzyme-APNC@frameworks material for cascade reactions.

Mechanochemical Functionalization of Oxidized Carbon Black with PLA

The functionalization of carbon black (CB) represents a promising strategy to enhance its compatibility with polymers while addressing sustainability concerns. In this study, a solvent-free mechanochemical approach (ball milling) is proposed for the functionalization of oxidized carbon black (oCB) with post-consumed polylactic acid (PLA), overcoming the environmental drawbacks of conventional methods that mostly rely on toxic solvents and catalysts. The functionalized carbon black (f-CB) was characterized by Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA), and thermogravimetric analysis (TGA) to confirm the successful modification. At the same time, the influence of f-CB as a nanofiller of residual PLA waste was evaluated using differential scanning calorimetry (DSC) and gel permeation chromatography (GPC), demonstrating its stabilization effect during melt extrusion by preserving the molecular weight of the starting polymer. On the other hand, the dynamic mechanical analysis (DMA) revealed that the addition of f-CB did not negatively affect the mechanical properties of the resulting composite. In conclusion, mechanochemistry was used as a sustainable and unique strategy for the upcycling of waste PLA into a PLA-based composite stabilized by CB functionalized with the waste PLA itself.

Sustainable and solvent-free synthesis of molecules of pharmaceutical importance by ball milling

The solvent-free mechanochemical reactions under ball milling have emerged as a promising alternative to traditional solution-based chemistry. This approach not only eliminates the necessity for large quantities of solvents and minimizes waste production, but it also facilitates a unique reaction environment that enables strategies, reactions, and compound syntheses that are typically unattainable in solution. This solvent-less synthetic strategy under ball-milling has been well employed in synthetic organic chemistry in accessing various potential organic molecules including pharmaceutically important molecules and pharmaceuticals or drug-molecules. This review highlights the potential of ball milling in the synthesis of pharmaceutically important classes of molecules without using any solvent (solvent-free conditions).

Mechanochemical Transformations of Pharmaceutical Cocrystals: Polymorphs and Coformer Exchange

Transformations of solid samples under solvent-free or minimal solvent conditions set the future trend and define a modern strategy for the production of new materials. Of the various technologies tested in recent years, the mechanochemical approach seems to be the most promising for economic and ecological reasons. The aim of this review article is to present the current state of art in solid state research on binary systems, which have found numerous applications in the pharmaceutical and materials science industries. This article is divided into three sections. In the first part, we describe the new equipment improvements, which include the innovative application of thermo-mechanochemistry, sono-mechanochemistry, photo-mechanochemistry, electro-mechanochemistry, as well as resonant acoustic mixing (RAM), and transformation under high-speed sample spinning ("SpeedMixing"). A brief description of techniques dedicated to ex-situ and in-situ studies of progress and the mechanism of solid matter transformation (PXRD, FTIR, Raman and NMR spectroscopy) is presented. In the second section, we discuss the problem of cocrystal polymorphism highlighting the issue related with correlation between mechanochemical parameters (time, temperature, energy, molar ratio, solvent used as a liquid assistant, surface energy, crystal size, crystal shape) and preference for the formation of requested polymorph. The last part is devoted to the description of the processes of coformer exchange in binary systems forced by mechanical and/or thermal stimuli. The influence of the thermodynamic factor on the selection of the best-suited partner for the formation of a two-component stable structure is presented.

Mechanochemical Synthesis of Molecular Chemoreceptors

The design of environmentally friendly methods for synthesizing molecular receptors is an expanding area within applied organic chemistry. This work systematically summarizes advances in the mechanochemical synthesis of molecular chemoreceptors. It discusses key achievements related to the synthesis of chemoreceptors containing azine, Schiff base, thiosemicarbazone, hydrazone, rhodamine 6G, imide, or amide moieties. Additionally, it highlights the application potential of mechanochemically synthesized molecular chemoreceptors in the recognition of ions and small molecules, along with a discussion of the mechanisms of detection processes.

Valorization of Protein Materials Through Mechanochemistry and Self-Assembly

The concept of combining mixing of solids by milling (a type of mechanochemistry) with aqueous self-assembly provides interesting possibilities for energy efficient production of advanced nanomaterials. Many proteins are outstanding building blocks for self-assembly, a prominent example being the conversion of proteins into protein nanofibrils (PNFs) - a structure related to amyloid fibrils. PNFs have attractive mechanical properties and have a tendency to form ordered materials. They are accordingly of interest as materials for bioplastics and potentially also for more high-tech applications. In this concept article we highlight our effort on valorization of such proteins with hydrophobic organic compounds such an organic dyes and drug molecules, by developing scalable methodology combining mechanochemistry and self-assembly. Compared to more established methodology, mechanochemical methodology is a valuable complement as it allows potential scalable production of hybrids between e. g. proteins and highly hydrophobic compounds - a class of hybrid material that is difficult to access by other means. This may allow for development of sustainable processes for fabrication of advanced protein-based materials derivable from renewable source materials.

Nonaqueous Contact-Electro-Chemistry via Triboelectric Charge

Mechanochemistry revolutionizes traditional reactions through mechanical stimulation, but its reaction efficiency is limited. Recent advancements in utilizing triboelectric charge from liquid-solid contact electrification (CE) have demonstrated significant potential in improving the reaction efficiency. However, its efficacy remains constrained by interfacial electrical double-layer screening in aqueous solutions. This study pioneered chemistry in nonaqueous systems via CE for catalysis and luminescence. Density functional theory simulations and experiments revealed varying electron transfer capabilities and chemoselectivity of CE across different solvents. Phenol degradation via CE in dimethyl sulfoxide (DMSO) exhibited a rate over 40 times faster than that of traditional mechano-driven chemistry. A more intuitive comparison revealed that CE degradation of phenol in DMSO exhibits a 30-fold rate improvement compared to deionized water, where the degradation remains incomplete. Luminol oxidation by radicals generated solely via CE in DMSO eliminates the dependence on traditional catalysts and side reactions, establishing a pure and simple system for investigating the reaction mechanisms. A high and stable luminescence characteristic was maintained for 3 months, enhancing the imaging accuracy and stability exponentially. This study underscores the impact of triboelectric charge on reaction efficiency and chemoselectivity, establishing a new paradigm in nonmetal catalysis, mechanoluminescence, and providing profound insights into reaction kinetics.

Facile Mechanochemical Functionalization of Hydrophobic Substrates for Single-Walled Carbon Nanotube Based Optical Reporters of Hydrolase Activity

Single walled carbon nanotubes (SWCNT) have recently been demonstrated as modular, near-infrared (nIR) probes for reporting hydrolase activity; however, these have been limited to naturally amphipathic substrate targets used to noncovalently functionalize the hydrophobic nanoparticles. Many relevant substrate targets are hydrophobic (such as recalcitrant biomass) and pose a challenge for modular functionalization. In this work, a facile mechanochemistry approach was used to couple insoluble substrates, such as lignin, to SWCNT using l-lysine amino acid as a linker and tip sonication as the mechanochemical energy source. The proposed coupling mechanism is ion pairing between the lysine amines and lignin carboxylic acids, as evidenced by FTIR, NMR, SEM, and elemental analyses. The limits of detection for the lignin-lysine-SWCNT (LLS) probe were established using commercial enzymes and found to be 0.25 ppm (volume basis) of the formulated product. Real-world use of the LLS probes was shown by evaluating soil hydrolase activities of soil samples gathered from different corn root proximal locations and soil types. Additionally, the probes were used to determine the effect of storage temperature on the measured enzyme response. The modularity of this mechanochemical functionalization approach is demonstrated with other substrates such as zein and 9-anthracenecarboxylic acid, which further corroborate the mechanochemical mechanism.

Efficient Preparation of Metal-Ion Intercalated Vanadium-Based Cathodes for High-Performance Aqueous Zinc-Ion Batteries: Na2V6O16·3H2O as an Example

The inherent challenges associated with aqueous zinc ion batteries (AZIBs), such as low energy density and slow diffusion kinetics, pose significant obstacles to their widespread adoption as energy storage systems. These limitations mainly stem from the nongreen and complex preparation process of high-quality cathode materials. In this study, we propose an approach utilizing microwave-assisted ball milling to expedite the fabrication of vanadium-based intercalated nanomaterials, aiming at solving the problem of prolonged reaction at high temperatures, which is unavoidable in the preparation of anode materials. Na2V6O16 (NVO) nanorods were synthesized in just 40 min under aqueous solvent conditions. These nanorods exhibit remarkable electrochemical properties, including a high specific capacity of 564 mA h g-1 at 0.1 A g-1 and an excellent cycle life, maintaining 164.2 mA h g-1 after 5000 cycles at 5 A g-1. Additionally, the incorporation of Na+ into the electrolyte effectively mitigates the stripping of Na+ and the deposition of Zn dendrimers from NVO, further contributing to enhanced cycling stability. The findings of this study offer a promising approach to the rapid and efficient synthesis of high-quality ZIB cathode materials.

Mechanochemically Promoted Functionalization of Postconsumer Poly(Methyl Methacrylate) and Poly(α-Methylstyrene) for Bulk Depolymerization

We describe a methodology of post-polymerization functionalization to enable subsequent bulk depolymerization to monomer by utilizing mechanochemical macro-radical generation. By harnessing ultrasonic chain-scission in the presence of N-hydroxyphthalimide methacrylate (PhthMA), we successfully chain-end functionalize polymers to promote subsequent depolymerization in bulk, achieving up to 82 % depolymerization of poly(methyl methacrylate) (PMMA) and poly(α-methylstyrene) (PAMS) within 30 min. This method of depolymerization yields a high-purity monomer that can be repolymerized. Moreover, as compared to the most common methods of depolymerization, this work is most efficient with ultra-high molecular weight (UHMW) polymers, establishing a method with the potential to address highly persistent, non-degradable all-carbon backbone plastic materials. Lastly, we demonstrate the expansion of this depolymerization method to commercial cell cast PMMA, achieving high degrees of depolymerization from post-consumer waste. This work is the first demonstration of applying PhthMA-promoted depolymerization strategies in homopolymer PMMA and PAMS prepared by conventional polymerization methods.

Mechanically induced cationic reversible addition-fragmentation chain transfer polymerization of vinyl ethers

Mechanoredox catalysis has emerged as a sustainable approach for organic transformations. Mechanically controlled polymerization that uses mechanoredox catalysts enables synthesis of complex polymers and mechanoresponsive materials with diverse applications. Despite its potential, the focus has predominantly been on free radical polymerization and acrylate monomers. The mechanochemical synthesis of poly(vinyl ether)s (PVEs) poses a significant challenge in the field. Herein, we report an efficient mechanically induced cationic reversible addition-fragmentation chain transfer (mechano-cRAFT) polymerization using 2D MoS2 as a mechanoredox catalyst, where free radical intermediates can be further oxidized to cations to promote cationic polymerization of vinyl ethers. This mechano-cRAFT polymerization can be conducted in air and with minimal organic solvent, resulting in quantitative monomer conversion. This strategy is applicable to a range of vinyl ether monomers, yielding polymers with controlled molecular weight and narrow dispersity. We also performed trapping experiments to investigate the piezoelectrically mediated redox process, and further validated the mechanism through density functional theory (DFT) calculations.

Molecular Recognition in Mechanochemistry: Insights from Solid-State NMR Spectroscopy

Molecular-recognition events are highly relevant in biology and chemistry. In the present study, we investigated such processes in the solid state under mechanochemical conditions using the formation of racemic phases upon reacting enantiopure entities as example. As test systems, α-(trifluoromethyl)lactic acid (TFLA) and the amino acids serine and alanine were used. The effects of ball-milling and resonant acoustic mixing (RAM) on the formation of racemic phases were probed by using solid-state Nuclear Magnetic Resonance (NMR) spectroscopy. In a mixer mill, a highly efficient and fast racemic phase formation occurred for both TFLA and the two amino acids. RAM led to the racemic phase for TFLA also, and this process was facilitated upon employing pre-milled enantiopure entities. In contrast, under comparable conditions RAM did not result in the formation of racemic phases for serine and alanine.

Iron-MOFs for Biomedical Applications

Over the past two decades, iron-based metal-organic frameworks (Fe-MOFs) have attracted significant research interest in biomedicine due to their low toxicity, tunable degradability, substantial drug loading capacity, versatile structures, and multimodal functionalities. Despite their great potential, the transition of Fe-MOFs-based composites from laboratory research to clinical products remains challenging. This review evaluates the key properties that distinguish Fe-MOFs from other MOFs and highlights recent advances in synthesis routes, surface engineering, and shaping technologies. In particular, it focuses on their applications in biosensing, antimicrobial, and anticancer therapies. In addition, the review emphasizes the need to develop scalable, environmentally friendly, and cost-effective production methods for additional Fe-MOFs to meet the specific requirements of various biomedical applications. Despite the ability of Fe-MOFs-based composites to combine therapies, significant hurdles still remain, including the need for a deeper understanding of their therapeutic mechanisms and potential risks of resistance and overdose. Systematically addressing these challenges could significantly enhance the prospects of Fe-MOFs in biomedicine and potentially facilitate their integration into mainstream clinical practice.

Mechanochemical Conditions for Intramolecular N-O Couplings via Rhodium Nitrenoids Generated from N-Acyl Sulfonimidamides

Starting from N-acyl sulfonimidamides, mechanochemically generated rhodium nitrenoids undergo intramolecular N-O couplings to provide unprecedented 1,3,2,4-oxathiadiazole 3-oxides in good to excellent yields. The cyclization proceeds efficiently with a catalyst loading of only 0.5 mol % in the presence of phenyliodine(III) diacetate (PIDA) as oxidant. Neither an inert atmosphere nor additional heating is required in this solvent-free procedure. Under heat or blue light, the newly formed five-membered heterocycles function as nitrene precursors reacting with sulfoxides as exemplified by the imidation of dimethyl sulfoxide.

Mechanochemical generation of aryl barium nucleophiles from unactivated barium metal

Organobarium reagents are of interest as homologues of the Grignard reagents based on organomagnesium compounds due to their unique reactivity as well as regio- and stereoselectivity. However, reactions involving organobarium reagents are less developed in comparison to reactions involving Grignard reagents due to the lack of a simple and economical synthetic method and their high reactivity. To the best of our knowledge, there is no established method for the direct synthesis of organobarium compounds from commercially available bulk barium metal and organic halides. So far, the generation of organobarium compounds usually requires the use of activated barium (Rieke barium), which significantly reduces the practical utility of organobarium reagents and hinders the development of new organobarium-mediated transformations. Here, we present a mechanochemical strategy based on ball-milling that facilitates the direct generation of various aryl barium nucleophiles from commercially available unactivated barium metal and aryl halides without complicated pre-activation processes. Our simple mechanochemical protocol allows the rapid development of novel carbon-silicon-bond-forming reactions with hydrosilanes mediated by aryl barium nucleophiles; importantly, these reactions are difficult to achieve using other Grignard-type carbon nucleophiles. To the best of our knowledge, this is the first example of a nucleophilic substitution reaction involving an aryl barium species. Furthermore, this mechanochemical strategy established the first example of a nucleophilic addition to a carbonyl compound involving an aryl barium nucleophile. Preliminary theoretical calculations using the artificial force-induced reaction (AFIR) method to reveal the reaction mechanism of the hydrosilane arylation are also described.

Titanium Dioxide Nanomaterials: Progress in Synthesis and Application in Drug Delivery

Background: Recent developments in nanotechnology have provided efficient and promising methods for the treatment of diseases to achieve better therapeutic results and lower side effects. Titanium dioxide (TiO2) nanomaterials are emerging inorganic nanomaterials with excellent properties such as low toxicity and easy functionalization. TiO2 with special nanostructures can be used as delivery vehicles for drugs, genes and antigens for various therapeutic options. The exploration of TiO2-based drug delivery systems shows great promise for translating nanotechnology into clinical applications; Methods: Comprehensive data on titanium dioxide were collected from reputable online databases including PubMed, GreenMedical, Web of Science, Google Scholar, China National Knowledge Infrastructure Database, and National Intellectual Property Administration; Results: In this review, we discuss the synthesis pathways and functionalization strategies of TiO2. Recent advances of TiO2 as a drug delivery system, including sustained and controlled drug release delivery systems were introduced. Rigorous long-term systematic toxicity assessment is an extremely critical step in application to the clinic, and toxicity is still a problem that needs to be closely monitored; Conclusions: Despite the great progress made in TiO2-based smart systems, there is still a great potential for development. Future research may focus on developing dual-reaction delivery systems and single-reaction delivery systems like redox and enzyme reactions. Undertaking thorough in vivo investigations is necessary prior to initiating human clinical trials. The high versatility of these smart drug delivery systems will drive the development of novel nanomedicines for personalized treatment and diagnosis of many diseases with poor prognosis.

Ball-Milling-Enabled Nickel-Catalyzed Reductive 1,4-Alkylarylation of 1,3-Enynes under an Air Atmosphere

A ball-mill-enabled nickel-catalyzed 1,4-alkylarylation of 1,3-enynes with organic bromides has been developed, offering a versatile method for assembling tetrasubstituted allenes. This approach, the first of ball-milling-based remote radical coupling, overcomes the limitations of traditional solution-phase methods, such as the need for air- and moisture-sensitive reagents, the use of bulk solvents, and prolonged reaction times. Given the outstanding performance of ball-milling-based radical reduction coupling reactions, we anticipate further advancements in sustainable and efficient synthetic methodologies.

Mechanochemical extraction of edible proteins from moor grass

Extracting edible nutrient-rich food fractions from unconventional sources, such as grass, could play a pivotal role in ensuring food security, bolstering economic prosperity, combating climate change, and enhancing overall quality of life. Current extraction techniques rely heavily on harsh chemicals, which not only degrade nutrients but can also substantially add to the cost of the process and make downstream separation challenging. In this study, we harnessed a mechanochemical process, liquid-assisted grinding (LAG) with and without Na2CO3, termed sodium carbonate assisted grinding (SAG), to extract the protein fraction from moor grass. These techniques were compared to the conventional alkaline extraction (AE) method. Unlike alkaline extraction, which solubilized over 70% of the material, the mechanochemical approach using Na2CO3 solubilized only 55% of the grass while still extracting the vast majority of the protein in the original grass feedstock. The protein fractions obtained from the SAG process had a similar amino acid profile to the core feedstock but also contained distinct characteristics over the other methods of extraction. FT-IR analysis, for example, identified the presence of an amide III band in the protein fractions obtained from the SAG process, indicating unique structural features that contribute to improved dispersibility, gelation properties, and water-in-water stability. Furthermore, the extracted moor grass protein contained a higher proportion of glutamic acid in comparison to other amino acids in the protein, which indicates a savoury umami (meaty) characteristic to the protein fraction. The protein extracted via SAG also exhibited good heat stability (139-214 °C), rendering them potentially suitable for baking applications. Additionally, coupling Na2CO3 with liquid assisted grinding not only removed the need for organic solvents and conventional heating but also reduced solvent consumption by 83%, compared with the typical alkaline extraction, thus simplifying the downstream processes necessary to produce food fractions. This study demonstrates the potential significance of mechanochemical extraction processes in unlocking nutrients from unconventional resources like grass, to produce the next generation of sustainable food ingredients.

Mechanochemical Synthesis of Corannulene Flanked N-heterocyclic Carbene (NHC) Precursors and Preparation of Their Metal Complexes

The synthesis of new compounds is an important pillar for the advancement of the field of chemistry and adjacent fields. In this regard, over the last decades huge efforts have been made to not only develop new molecular entities but also more efficient sustainable synthetic methodologies due to the increasing concerns over environmental sustainability. In this context, we have developed synthetic routes to novel corannulene flanked imidazolium bromide NHC precursors both in the solid-state and solution phases. Our work presents a comprehensive comparative study of mechanochemical routes and conventional solution-based methods. Green metrics and energy consumption comparison were performed for both routes revealing ball-milling generation of these compounds to be an environmentally greener technique to produce such precursors compared to conventional solvent-based methods. In addition, we have demonstrated proof-of-concept of the herein reported corannulene flanked NHCs to be robust ligands for transition metals and their ligand substitution reactions.

Calcium Carbide (CaC2) as a C2-Synthon by Mechanochemistry

Mechanochemical reactions by ball milling have opened new avenues in chemical synthesis. Particularly, mechanochemistry has facilitated the reaction of insoluble materials to simplify stablished synthetic protocols and develop new ones. One notable application involves the use of calcium carbide (CaC2) as a C2-synthon through mechanochemistry, which has offered a more practical alternative to incorporate C2-units compared to the conventional use of highly flammable gaseous acetylene. For example, by ball milling, the acetylenic anions [C2]2- found in CaC2 have been harnessed for the synthesis of diverse functional carbon materials as well as discrete organic molecules. This Concept aims to contribute to the conceptualization of this innovative approach while highlighting both its advantages and the challenges inherent in the use of CaC2.

Mechanochemical Synthesis of α-halo Alkylboronic Esters

α-halo alkylboronic esters, acting as ambiphilic synthons, play a pivotal role as versatile intermediates in fields like pharmaceutical science and organic chemistry. The sequential transformation of carbon-boron and carbon-halogen bonds into a broad range of carbon-X bonds allows for programmable bond formation, facilitating the incorporation of multiple substituents at a single position and streamlining the synthesis of complex molecules. Nevertheless, the synthetic potential of these compounds is constrained by limited reaction patterns. Additionally, the conventional methods often necessitate the use of bulk toxic solvents, exhibit sensitivity to air/moisture, rely on expensive metal catalysts, and involve extended reaction times. In this report, a ball milling technique is introduced that overcomes these limitations, enabling the external catalyst-free multicomponent coupling of aryl diazonium salts, alkenes, and simple metal halides. This approach offers a general and straightforward method for obtaining a diverse array of α-halo alkylboronic esters, thereby paving the way for the extensive utilization of these synthons in the synthesis of fine chemicals.

Nonmetallic modified zero-valent iron for remediating halogenated organic compounds and heavy metals: A comprehensive review

Zero Valent Iron (ZVI), an ideal reductant treating persistent pollutants, is hampered by issues like corrosion, passivation, and suboptimal utilization. Recent advancements in nonmetallic modified ZVI (NM-ZVI) show promising potential in circumventing these challenges by modifying ZVI's surface and internal physicochemical properties. Despite its promise, a thorough synthesis of research advancements in this domain remains elusive. Here we review the innovative methodologies, regulatory principles, and reduction-centric mechanisms underpinning NM-ZVI's effectiveness against two prevalent persistent pollutants: halogenated organic compounds and heavy metals. We start by evaluating different nonmetallic modification techniques, such as liquid-phase reduction, mechanical ball milling, and pyrolysis, and their respective advantages. The discussion progresses towards a critical analysis of current strategies and mechanisms used for NM-ZVI to enhance its reactivity, electron selectivity, and electron utilization efficiency. This is achieved by optimizing the elemental compositions, content ratios, lattice constants, hydrophobicity, and conductivity. Furthermore, we propose novel approaches for augmenting NM-ZVI's capability to address complex pollution challenges. This review highlights NM-ZVI's potential as an alternative to remediate water environments contaminated with halogenated organic compounds or heavy metals, contributing to the broader discourse on green remediation technologies.

Mechanochemical Regioselective [3+3] Annulation of 6-Amino Uracil with Propargyl Alcohols Catalyzed by a Brønsted Acid/Hexafluoroisopropanol

A mechanochemistry approach is developed for regioselective synthesis of functionalized dihydropyrido[2,3-d]pyrimidines by milling propargylic alcohols and 6-aminouracils with HFIP/p-TsOH. In the case of tert-propargyl alcohols, this [3+3] cascade annulation proceeded through allenylation of uracil followed by a 6-endo trig cyclization. With sec-propargyl alcohols, the reaction furnished the propargylation of uracil. This atom economy ball milling reaction allows access to a broad range of dihydropyrido[2,3-d]pyrimidine derivatives in excellent yields. We demonstrated the gram scale synthesis of 3 g and post-synthetic modifications to effect the cyclization of 5 to 6.

Organic Reactions Enabled by Mechanical Force-Induced Single Electron Transfer

Mechanochemical reactions, achieved through milling, grinding, or other mechanical actions, have emerged as a solvent-free alternative to traditional solution-based chemistry. Mechanochemistry not only provides the opportunity to eliminate bulk solvent use, reducing waste generation, but also unveils a new reaction strategy which enables the realization of reactions previously inaccessible in solution. While the majority of organic reactions facilitated by mechanical force traditionally follow two-electron transfer pathways similar to their solution-based counterparts, the field of mechanochemically induced single-electron transfer (SET) reactions has witnessed rapid development. This review outlines examples of mechanochemical reactions facilitated by the SET process, focusing on the reagents that initiate SET, thereby positioning mechanochemistry as a burgeoning field within the realm of single-electron chemistry.

Prediction of Degradation Profiles for Various Sartans under Solvent-Free Mechanochemical Conditions

For the approval of a drug, the stability data must be submitted to regulatory authorities. Such analyses are often time-consuming and cost-intensive. Forced degradation studies are mainly carried out under harsh conditions in the dissolved state, often leading to extraneous degradation profiles for a solid drug. Oxidative mechanochemical degradation offers the possibility of generating realistic degradation profiles. In this study, a sustainable mechanochemical procedure is presented for the degradation of five active pharmaceutical ingredients (APIs) from the sartan family: losartan potassium, irbesartan, valsartan, olmesartan medoxomil, and telmisartan. High-resolution mass spectrometry enabled the detection of impurities already present in untreated APIs and allowed the elucidation of degradation products. Significant degradation profiles could already be obtained after 15-60 min of ball milling time. Many of the identified degradation products are described in the literature and pharmacopoeias, emphasizing the significance of our results and the applicability of this approach to predict degradation profiles for drugs in the solid state.

Mechanochemistry Drives Alkene Difunctionalization via Radical Ligand Transfer and Electron Catalysis

A general and modular protocol is reported for olefin difunctionalization through mechanochemistry, facilitated by cooperative radical ligand transfer (RLT) and electron catalysis. Utilizing mechanochemical force and catalytic amounts of 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO), ferric nitrate can leverage nitryl radicals, transfer nitrooxy-functional group via RLT, and mediate an electron catalysis cycle under room temperature. A diverse range of activated and unactivated alkenes exhibited chemo- and regioselective 1,2-nitronitrooxylation under solvent-free or solvent-less conditions, showcasing excellent functional group tolerance. Mechanistic studies indicated a significant impact of mechanochemistry and highlighted the radical nature of this nitrative difunctionalization process.

Machine-Learning-Assisted Discovery of Mechanosynthesized Lead-Free Metal Halide Perovskites for the Oxidative Photocatalytic Cleavage of Alkenes

Lead-free metal halide perovskites can potentially be air- and water-stable photocatalysts for organic synthesis, but there are limited studies on them for this application. Separately, machine learning (ML), a critical subfield of artificial intelligence, has played a pivotal role in identifying correlations and formulating predictions based on extensive datasets. Herein, an iterative workflow by incorporating high-throughput experimental data with ML to discover new lead-free metal halide perovskite photocatalysts for the aerobic oxidation of styrene is described. Through six rounds of ML optimization guided by SHapley Additive exPlanations (SHAP) analysis, BA2CsAg0.95Na0.05BiBr7 as a photocatalyst that afforded an 80% yield of benzoic acid under the standard conditions is identified, which is a 13-fold improvement compared to the 6% with when using Cs2AgBiBr6 as the initial photocatalyst benchmark that is started. BA2CsAg0.95Na0.05BiBr7 can tolerate various functional groups with 22 styrene derivatives, highlighting the generality of the photocatalytic properties demonstrated. Radical scavenging studies and density functional theory calculations revealed that the formation of the reactive oxygen species superoxide and singlet oxygen in the presence of BA2CsAg0.95Na0.05BiBr7 are critical for photocatalysis.

Mechanochemical synthesis of iron aluminyl complexes

A series of iron aluminyl complexes have been synthesised in good crystalline yields from reactions between bulky diamido aluminium iodide complexes and K[Fe(CO)2Cp] in the solid state. The series of metal-metal bonded complexes have been characterised by X-ray crystallography and were investigated using density functional theory to probe the effects of ligand substitution on the Al-Fe bond.

Dehydrogenation Coupling and [3 + 2] Cycloaddition of Indolizines with Allenes in the Presence of Piezoelectric Materials under Ball Milling Conditions

A wide range of indolizines with allenes proceeded smoothly under mechanochemical-induced conditions via [3 + 2] annulation process, affording various substituted pyrrolo[2,1,5-cd]indolizines with good yield. The reaction efficiency was greatly improved by using a piezoelectric material as the charge transfer catalyst. The photophysical properties of the resulting pyrrolo[2,1,5-cd]indolizine was characterized.

Liquid-assisted grinding enables a direct mechanochemical functionalization of polystyrene waste

The plastic waste crisis has grave consequences for our environment, as most single-use commodity polymers remain in landfills and oceans long after their commercial lifetimes. Utilizing modern synthetic techniques to chemically modify the structure of these post-consumer plastics (e.g., upcycling) can impart new properties and added value for commercial applications. To expand beyond the abilities of current solution-state chemical processes, we demonstrate post-polymerization modification of polystyrene via solid-state mechanochemistry enabled by liquid-assisted grinding (LAG). Importantly, this emblematic trifluoromethylation study modifies discarded plastic, including dyed materials, using minimal exogenous solvent and plasticizers for improved sustainability. Ultimately, this work serves as a proof-of-concept for the direct mechanochemical post-polymerization modification of commodity polymers, and we expect future remediation of plastic waste via similar mechanochemical reactions.

Mechanochemical Fabrication of Full-Color Luminescent Materials from Aggregation-Induced Emission Prefluorophores for Information Storage and Encryption

The development of luminescent materials via mechanochemistry embodies a compelling yet intricate frontier within materials science. Herein, we delineate a methodology for the synthesis of brightly luminescent polymers, achieved by the mechanochemical coupling of aggregation-induced emission (AIE) prefluorophores with generic polymers. An array of AIE moieties tethered to the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical are synthesized as prefluorophores, which initially exhibit weak fluorescence due to intramolecular quenching. Remarkably, the mechanical coupling of these prefluorophores with macromolecular radicals, engendered through ball milling of generic polymers, leads to substantial augmentation of fluorescence within the resultant polymers. We meticulously evaluate the tunable emission of the AIE-modified polymers, encompassing an extensive spectrum from the visible to the near-infrared region. This study elucidates the potential of such materials in stimuli-responsive systems with a focus on information storage and encryption displays. By circumventing the complexity inherent to the conventional synthesis of luminescent polymers, this approach contributes a paradigm to the field of AIE-based polymers with implications for advanced technological applications.

Mechanical-Force-Induced Non-spontaneous Dehalogenative Deuteration of Aromatic Iodides Enabled by Using Piezoelectric Materials as a Redox Catalyst

The development of green and efficient deuteration methods is of great significance for various fields such as organic synthesis, analytical chemistry, and medicinal chemistry. Herein, we have developed a dehalogenative deuteration strategy using piezoelectric materials as catalysts in a solid-phase system under ball-milling conditions. This non-spontaneous reaction is induced by mechanical force. D2O can serve as both a deuterium source and an electron donor in the transformation, eliminating the need for additional stoichiometric exogenous reductants. A series of (hetero)aryl iodides can be transformed into deuterated products with high deuterium incorporation. This method not only effectively overcomes existing synthetic challenges but can also be used for deuterium labelling of drug molecules and derivatives. Bioactivity experiments with deuterated drug molecule suggest that the D-ipriflavone enhances the inhibitory effects on osteoclast differentiation of BMDMs in vitro.

Generic and facile mechanochemical access to versatile lattice-confined Pd(ii)-based heterometallic sites

Metal-organic frameworks (MOFs) show remarkable potential in a broad array of applications given their physical and chemical versatility. Classical synthesis of MOFs is performed using solution chemistry at elevated temperatures to achieve reversible metal-ligand bond formation. These harsh conditions may not be suitable for chemical species sensitive to high temperature or prone to deleterious reactions with solvents. For instance, Pd(ii) is susceptible to reduction under solvothermal conditions and is not a common metal node of MOFs. We report a generic and facile mechanochemical strategy that directly incorporates a series of Pd(ii)-based heterobimetallic clusters into MOFs as metal nodes without Pd(ii) being reduced to Pd(0). Mechanochemistry features advantages of short reaction time, minimum solvent, high reaction yield, and high degree of synthetic control. Catalytic performances of lattice-confined heterobimetallic sites are examined for nitrene transfer reactions and we demonstrate that the chemoselectivity for allylic amination versus olefin aziridination is readily tuned by the identity of the first-row metal ion in Pd(ii)-based heterobimetallic clusters.

Mechanocatalytic Synthesis of Ammonia by Titanium Dioxide with Bridge-Oxygen Vacancies: Investigating Mechanism from the Experimental and First-Principle Approach

Mechanochemical ammonia (NH3) synthesis is an emerging mild approach derived from nitrogen (N2) gas and hydrogen (H) source. The gas-liquid phase mechanochemical process utilizes water (H2O), rather than conventional hydrogen (H2) gas, as H sources, thus avoiding carbon dioxide (CO2) emission during H2 production. However, ammonia yield is relatively low to meet practical demand due to huge energy barriers of N2 activation and H2O dissociation. Here, six transition metal oxides (TMO) such as titanium dioxide (TiO2), iron(III) oxide (Fe2O3), copper(II) oxide (CuO), niobium(V) oxide(Nb2O5), zinc oxide (ZnO), and copper(I) oxide (Cu2O) are investigated as catalysts in mechanochemical N2 fixation. Among them, TiO2 shows the best mechanocatalytic effect and the optimum reaction rate constant is 3.6-fold higher than the TMO-free process. The theoretical calculations show that N2 molecules prefer to side-on chemisorb on the mechano-induced bridge-oxygen vacancies in the (101) crystal plane of TiO2 catalyst, while H2O molecules can dissociate on the same sites more easily to provide free H atoms, enabling an alternative-way hydrogeneration process of activated N2 molecules to release NH3 eventually. This work highlights the cost-effective TiO2 mechanocatalyst for ammonia synthesis under mild conditions and proposes a defect-engineering-induced mechanocatalytic mechanism to promote N2 activation and H2O dissociation.

Tuning Coordination in ZIF-67 Through the Solid-State Thermal Synthesis for Balancing Structural Stability and Catalytic Reactivity

Tailor-made unsaturated coordination of metal ions or organic linkers in zeolitic imidazole frameworks (ZIFs) has great potential in tuning the ZIFs' properties and reactivity for their applications. Taking advantage of the solid-state thermal (SST) method as a facile and eco-friendly synthesis method, the rational coordination of metal ions with imidazole ligands in ZIF-67 through the SST method is investigated. The rational precursor ratio (metal-to-ligand source) under the solvent-free SST method emerges as a perfect strategy to tune the coordinately unsaturated sites within the ZIF-67 frameworks. Different analysis techniques, computational methods (DFT), and catalytic model reactions examine unsaturated coordination in ZIF-67 materials (defect structures). The unsaturated coordination provides unique characteristic properties on materials with excellent catalytic performance. However, the higher reactive properties are negotiated with weaker structural stability on materials. In addition, the post-SST approach is applied to enable rational coordination and modify the pristine ZIF-67 materials. The post-SST method rearranges and modifies coordination in the framework of materials. These findings are crucial to understanding the role of the uncoordinated degree to balance with structural stability based on ZIF-67, which is critical for effective heterogeneous catalysts.

Is bismuth(III) able to inhibit the activity of urease? Puzzling results in the quest for soluble urease complexes for agrochemical and medicinal applications

Bismuth(III) complexes have been reported to act as inhibitors of the enzyme urease, ubiquitously present in soils and implicated in the pathogenesis of several microorganisms. The general insolubility of Bi(III) complexes in water at neutral pH, however, is an obstacle to their utilization. In our quest to improve the solubility of Bi(III) complexes, we selected a compound reported to inhibit urease, namely [Bi(HEDTA)]·2H2O, and co-crystallized it with (i) racemic DL-histidine to obtain the conglomerate [Bi2(HEDTA)2(μ-D-His)2]·6H2O + [Bi2(HEDTA)2(μ-L-His)2]·6H2O, (ii) enantiopure L-histidine to yield [Bi2(HEDTA)2(μ-L-His)2]·6H2O, and (iii) cytosine to obtain [Bi(HEDTA)]·Cyt·2H2O. All compounds, synthesised by mechanochemical methods and by slurry, were characterized in the solid state by calorimetric (DSC and TGA) and spectroscopic (IR) methods, and their structures were determined using powder X-ray diffraction (PXRD) data. All compounds show an appreciable solubility in water, with values ranging from 6.8 mg mL-1 for the starting compound [Bi(HEDTA)]·2H2O to 36 mg mL-1 for [Bi2(HEDTA)2(μ-L-His)2]·6H2O. The three synthesized compounds as well as [Bi(HEDTA)]·2H2O were then tested for inhibition activity against urease. Surprisingly, no enzymatic inhibition was observed during in vitro assays using Canavalia ensiformis urease and in vivo assays using cultures of Helicobacter pylori, raising questions on the efficacy of Bi(III) compounds to counteract the negative effects of urease activity in the agro-environment and in human health.

Harnessing the 12 Green Chemistry Principles for Sustainable Antiparasitic Drugs: Toward the One Health Approach

Antiparasitic drug development stands as a critical endeavor in combating infectious diseases which, by affecting the well-being of humans, animals, and the environment, pose significant global health challenges. In a scenario where conventional pharmacological interventions have proven inadequate, the One Health approach, which emphasizes interdisciplinary collaboration and holistic solutions, emerges as a vital strategy. By advocating for the integration of One Health principles into the R&D pharmaceutical pipeline, this Perspective promotes green chemistry methodologies to foster the development of environmentally friendly antiparasitic drugs for both human and animal health. Moreover, it highlights the urgent need to address vector-borne parasitic diseases (VBPDs) within the context of One Health-driven sustainable development, underscoring the pivotal role of medicinal chemists in driving transformative change. Aligned with the Sustainable Development Goals (SDGs) and the European Green Deal, this Perspective explores the application of the 12 Principles of Green Chemistry as a systematic framework to guide drug discovery and production efforts in the context of VBPD. Through interdisciplinary collaboration and a constant commitment to sustainability, the field can overcome the challenges posed by VBPD while promoting global and environmental responsibility. Serving as a call to action, scientists are urged to integrate One Health concepts and green chemistry principles into routine drug development practices, thereby paving the way for a more sustainable R&D pharmaceutical pipeline for antiparasitic drugs.