Rapidly Reprocessable Cross-Linked Polyhydroxyurethanes Based on Disulfide Exchange

Development of Fluorenyl-Based Copolyimines with Adjustable Mechanical Properties, Recyclability and Friction Resistance

Dynamic polyimines are a class of fascinating dynamic polymers with recyclability and reparability owing to their reversible Schiff-base reactions. However, balancing the dynamic properties and mechanical strength of dynamic polyimines presents a major challenge due to the dissociative and associative nature of the imine bonds. Herein, we introduced bulky fluorene groups and polyether amine into the skeleton of polyimine networks to achieve a tradeoff in comprehensive properties. The resulting dynamic polyimines with fluorene groups (Cardo-DPIs) were successfully synthesized by combining the rigid diamine 9,9-bis(4-aminophenyl)fluorene and the flexible polyether amine, demonstrating a high tensile strength of 64.7 MPa. Additionally, Cardo-DPIs films with more content of rigid fluorene groups exhibited higher water resistance, glass transition temperature and wear-resisting ability. Moreover, the Cardo-DPIs films not only efficiently underwent thermal reshaping, but also exhibited excellent self-healing capabilities and chemical degradation in acidic solutions. Furthermore, the resulting films can achieve fully closed-loop recovery by free amine solution for 2 h at room temperature. This study broadens the scope of dynamic polyimine materials and promotes the balanced development of their functional and mechanical properties.

A Biobased Epoxy Vitrimer with Dual Relaxation Mechanism: A Promising Material for Renewable, Reusable, and Recyclable Adhesives and Composites

This study presents the synthesis of a novel biobased epoxy monomer derived from vanillin and cystamine, incorporating imine and disulfide exchangeable groups within its structure. A series of epoxy-based vitrimers with two simultaneous exchange relaxation processes have been produced using this monomer. These exchange mechanisms operate without the need for any catalyst. Four different amine curing agents have been employed to achieve vitrimers with glass transition temperatures around 100 °C and excellent thermal stability. Through dynamic-mechanical analyses, thermomechanical properties and vitrimeric characteristics have been investigated, revealing remarkably fast stress relaxation at relatively low temperatures without significant creep below the glass transition temperature. Leveraging the dual exchange mechanism, the chemical degradability of these vitrimers has been explored through two accessible methodologies, and the material's reformation after degradation has been demonstrated in both cases. Furthermore, the material has been mechanically recycled, maintaining almost the same properties. Finally, these materials have been used to fabricate and recycle carbon-fiber-reinforced composite material and reversible adhesives, showcasing their promising potential applications.

Bio-based epoxy vitrimer with inherent excellent flame retardance and recyclability via molecular design

The development of biobased fire-safe thermosets with recyclability heralds the switch for a transition towards a circular economy. In this framework, we introduced a novel high-performance bio-epoxy vitrimer (named GVD), which was fabricated by forming a crosslinking network between bio-epoxy glycerol triglycidyl ether (Gte), varying amounts of reactive flame-retardant agent 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) (0-7 wt%) and a vanillin-based hardener (VA) with imine bonds. For instance, the epoxy vitrimer GVD5, featuring a DOPO content of 5 wt%, achieved a V-0 rating in the vertical burning test (UL-94) and obtained a limiting oxygen index (LOI) value of 31 %, surpassing the performance of pristine epoxy. Furthermore, the peak heat release rate and total heat release of GVD5 were reduced by 38.2 % and 26.3 %, respectively, compared to pristine epoxy. The GVD vitrimers further demonstrated exceptional reprocessability and recyclability, attributed to the presence of dynamic imine bonds within the topological crosslinking network. Remarkably, the epoxy vitrimers maintained the mechanical properties of the parent epoxy. Therefore, this work provides a facile strategy for fabricating high-performance and multi-functional bio-epoxy thermosets.

Reconfiguration, Welding, Reprogramming, and Complex Shape Transformation of An Optical Shape Memory Polymer Network Enabled by Patterned Secondary Crosslinking

Stimuli-triggered generation of complicated 3D shapes from 2D strips or plates without using sophisticated molds is desirable and achieving such 2D-to-3D shape transformation in combination with shape reconfiguration, welding, and reprogramming on a single material is very challenging. Here, a convenient and facile strategy using the solution of a disulfide-containing diamine for patterned secondary crosslinking of an optical shape-memory polymer network is developed to integrate the above performances. The dangling thiolectones attached to the backbones react with the diamine in the solution-deposited region so that the secondary crosslinking may not only weld individual strips into assembled 3D shapes but also suppress the relaxation of the deformed polymer chains to different extents for shape reconfiguration or heating-induced complex 3D deformations. In addition, as the dynamic disulfide bonds can be thermally activated to erase the initial programming information and the excessive thiolectones are available for subsequent patterned crosslinking, the material also allows shape reprogramming. Combining welding with patterning treatment, it is further demonstrated that a gripper can be assembled and photothermally controlled to readily grasp an object.

Polyhydroxyurethane and Poly(ethylene oxide) Multiblock Copolymer Networks: Crosslinking with Polysilsesquioxane, Reprocessing and Solid Polyelectrolyte Properties

This contribution reports the synthesis of polyhydroxyurethane (PHU)-poly(ethylene oxide) (PEO) multiblock copolymer networks crosslinked with polysilsesquioxane (PSSQ). First, the linear PHU-PEO multiblock copolymers were synthesized via the step-growth polymerization of bis(6-membered cyclic carbonate) (B6CC) with α,ω-diamino-terminated PEOs with variable molecular weights. Thereafter, the PHU-PEO copolymers were allowed to react with 3-isocyanatopropyltriethoxysilane (IPTS) to afford the derivatives bearing triethoxysilane moieties, the hydrolysis and condensation of which afforded the PHU-PEO networks crosslinked with PSSQ. It was found that the PHU-PEO networks displayed excellent reprocessing properties in the presence of trifluoromethanesulfonate [Zn(OTf)2]. Compared to the PHU networks crosslinked via the reaction of difunctional cyclic carbonate with multifunctional amines, the organic-inorganic PHU networks displayed the decreased reprocessing temperature. The metathesis of silyl ether bonds is responsible for the improved reprocessing behavior. By adding lithium trifluoromethanesulfonate (LiOTf), the PHU-PEO networks were further transformed into the solid polymer electrolytes. It was found that the crystallization of PEO chains in the crosslinked networks was significantly suppressed. The solid polymer electrolytes had the ionic conductivity as high as 7.64 × 10-5 S × cm-1 at 300 K. More importantly, the solid polymer electrolytes were recyclable; the reprocessing did not affect the ionic conductivity.

Covalent Adaptable Networks through Dynamic N,S-Acetal Chemistry: Toward Recyclable CO2-Based Thermosets

Finding new chemistry platforms for easily recyclable polymers has become a key challenge to face environmental concerns and the growing plastics demand. Here, we report a dynamic chemistry between CO2-sourced alkylidene oxazolidones and thiols, delivering circular non-isocyanate polyurethane networks embedding N,S-acetal bonds. The production of oxazolidone monomers from CO2 is facile and scalable starting from cheap reagents. Their copolymerization with a polythiol occurs under mild conditions in the presence of a catalytic amount of acid to furnish polymer networks. The polymer structure is easily tuned by virtue of monomer design, translating into a wide panel of mechanical properties similar to commodity plastics, ranging from PDMS-like elastomers [with Young's modulus (E) of 2.9 MPa and elongation at break (εbreak) of 159%] to polystyrene-like rigid plastics (with E = 2400 MPa, εbreak = 3%). The highly dissociative nature of the N,S-acetal bonds is demonstrated and exploited to offer three different recycling scenarios to the thermosets: (1) mechanical recycling by compression molding, extrusion, or injection molding─with multiple recycling (at least 10 times) without any material property deterioration, (2) chemical recycling through depolymerization, followed by repolymerization, also applicable to composites, and (3) upcycling of two different oxazolidone-based thermosets into a single one with distinct properties. This work highlights a new facile and scalable chemical platform for designing highly dynamic polymer networks containing elusive oxazolidone motifs. The versatility of this chemistry shows great potential for the preparation of materials (including composites) of tuneable structures and properties, with multiple end-of-life scenarios.

Reprocessable Polyurethane Foams Using Acetoacetyl-Formed Amides

Like any other thermosetting material, polyurethane foams (PUFs) contain permanent cross-links that hinder their reprocessability and make their recyclability a tedious and environmentally unfriendly process. Herein, we introduce acetoacetyl-formed amides, formed by the reaction of isocyanates with acetoacetate groups, as dynamic units in the backbone of PUFs. By extensive variation of the foam composition, optimum parameters have been found to produce malleable foams above temperatures of 130 °C, without the requirement of any solvent during the foaming process. The PU cross-linked material can be compression-molded at least three times, giving rise to PU elastomers and thus maintaining a cross-linked network structure. Characterization of the original foams shows comparable properties to standard PUFs, for example, having a density of 32 kg/m3, while they show similar chemical and thermal properties upon reprocessing to strong PU elastomers, exhibiting Tg ranging from -42 to -48 °C. This research provides a straightforward method to produce thermally reprocessable PUFs as a promising pathway to address the recycling issues of end-of-life foams.

Chemically Recyclable Biobased Non-Isocyanate Polyurethane Networks from CO2 -Derived Six-membered Cyclic Carbonates

Non-isocyanate polyurethanes (NIPUs) are widely studied as sustainability potential, because they can be prepared without using toxic isocyanates in the synthesis process. The aminolysis of cyclic carbonate to form NIPUs is a promising route. In this work, a series of NIPUs is prepared from renewable bis(6-membered cyclic carbonates) (iEbcc) and amines. The resulting NIPUs possess excellent mechanical properties and thermal stability. The NIPUs can be remolded via transcarbamoylation reactions, and iEbcc-TAEA-10 (the molar ratio of tris(2-aminoethyl)amine in amines is 10%) still get a recovery ratio of 90% in tensile stress after three cycles of remolding. In addition, the obtained materials can be chemically degraded into bi(1,3-diol) precursors with high purity (>99%) and yield (>90%) through alcoholysis. Meanwhile, the degraded products can be used to regenerate NIPUs with similar structures and properties as the original samples. The synthetic strategy, isocyanate-free and employing isoeugenol and carbon dioxide (CO2 ) as building blocks, makes this approach an attractive pathway to NIPU networks taking a step toward a circular economy.

Improving Sustainability through Covalent Adaptable Networks in the Recycling of Polyurethane Plastics

The global plastic waste problem has created an urgent need for the development of more sustainable materials and recycling processes. Polyurethane (PU) plastics, which represent 5.5% of globally produced plastics, are particularly challenging to recycle owing to their crosslinked structure. Covalent adaptable networks (CANs) based on dynamic covalent bonds have emerged as a promising solution for recycling PU waste. CANs enable the production of thermoset polymers that can be recycled using methods that are traditionally reserved for thermoplastic polymers. Reprocessing using hot-pressing techniques, in particular, proved to be more suited for the class of polyurethanes, allowing for the efficient recycling of PU materials. This Review paper explores the potential of CANs for improving the sustainability of PU recycling processes by examining different types of PU-CANs, bond types, and fillers that can be used to optimise the recycling efficiency. The paper concludes that further research is needed to develop more cost-effective and industrial-friendly techniques for recycling PU-CANs, as they can significantly contribute to sustainable development by creating recyclable thermoset polymers.

Recent Progress on Multifunctional Thermally Conductive Epoxy Composite

In last years, the requirements for materials and devices have increased exponentially. Greater competitiveness; cost and weight reduction for structural materials; greater power density for electronic devices; higher design versatility; materials customizing and tailoring; lower energy consumption during the manufacturing, transport, and use; among others, are some of the most common market demands. A higher operational efficiency together with long service life claimed. Particularly, high thermally conductive in epoxy resins is an important requirement for numerous applications, including energy and electrical and electronic industry. Over time, these materials have evolved from traditional single-function to multifunctional materials to satisfy the increasing demands of applications. Considering the complex application contexts, this review aims to provide insight into the present state of the art and future challenges of thermally conductive epoxy composites with various functionalities. Firstly, the basic theory of thermally conductive epoxy composites is summarized. Secondly, the review provides a comprehensive description of five types of multifunctional thermally conductive epoxy composites, including their fabrication methods and specific behavior. Furthermore, the key technical problems are proposed, and the major challenges to developing multifunctional thermally conductive epoxy composites are presented. Ultimately, the purpose of this review is to provide guidance and inspiration for the development of multifunctional thermally conductive epoxy composites to meet the increasing demands of the next generation of materials.

Circularity in polymers: addressing performance and sustainability challenges using dynamic covalent chemistries

The circularity of current and future polymeric materials is a major focus of fundamental and applied research, as undesirable end-of-life outcomes and waste accumulation are global problems that impact our society. The recycling or repurposing of thermoplastics and thermosets is an attractive solution to these issues, yet both options are encumbered by poor property retention upon reuse, along with heterogeneities in common waste streams that limit property optimization. Dynamic covalent chemistry, when applied to polymeric materials, enables the targeted design of reversible bonds that can be tailored to specific reprocessing conditions to help address conventional recycling challenges. In this review, we highlight the key features of several dynamic covalent chemistries that can promote closed-loop recyclability and we discuss recent synthetic progress towards incorporating these chemistries into new polymers and existing commodity plastics. Next, we outline how dynamic covalent bonds and polymer network structure influence thermomechanical properties related to application and recyclability, with a focus on predictive physical models that describe network rearrangement. Finally, we examine the potential economic and environmental impacts of dynamic covalent polymeric materials in closed-loop processing using elements derived from techno-economic analysis and life-cycle assessment, including minimum selling prices and greenhouse gas emissions. Throughout each section, we discuss interdisciplinary obstacles that hinder the widespread adoption of dynamic polymers and present opportunities and new directions toward the realization of circularity in polymeric materials.

Vanillin-Based Epoxy Vitrimers: Looking at the Cystamine Hardener from a Different Perspective

Epoxy vitrimers encompass many advantages compared to traditional epoxy materials such as recyclability, repairability, and reprocessability. These properties are induced by the incorporation of dynamic reversible covalent bonds. Recently, the incorporation of aromatic disulfide bridges that are dynamic has expanded the development of new eco-friendly epoxy materials. Herein, we studied a bio-based aliphatic disulfide based on cystamine as a hardener with a vanillin-derived bio-sourced epoxy to prepare fully bio-based epoxy vitrimers. This article provides a comparative study between cystamine and an aromatic disulfide benchmark hardener issued from petrol resources. This work demonstrated that the presence of this aliphatic hardener has a significant influence not only on the reactivity, but most importantly on the resulting dynamic properties. An interesting yet counterintuitive accelerating effect of the dynamic exchanges was clearly demonstrated with only 2 to 20% of molar fraction of cystamine added to the aromatic disulfide formulation. A similar glass transition was obtained compared to the purely aromatic analogue, but relaxation times were decreased by an order of magnitude.

Fully biobased sustainable elastomers derived from chitin, lignin, and plant oil via grafting strategy and Schiff-base chemistry

With the dramatically increased environmental problems, the rational design of sustainable polymers from renewable feedstocks opens new avenues to reduce the huge pollution impact. The major challenge for sustainable polymers is the decreased mechanical performance compared to that of petroleum-based materials. In this work, fully biobased sustainable elastomers were developed by integrating renewable chitin, lignin, and plant oil into one macromolecule, in which chitin was chosen as the rigid backbone, while a lignin-derived monomer vanillin acrylate (VA) and a plant oil-based monomer lauryl acrylate (LA) were selected as the hard and soft segments for the grafted side chains. A series of Chitin-graft-poly(vanillin acrylate-co-lauryl acrylate) (Chitin-g-P(VA-co-LA)) copolymers with varied feed ratios and chitin contents were synthesized by using reversible addition-fragmentation chain transfer (RAFT) polymerization as an effective grafting strategy. In addition, a dynamic cross-linked network was incorporated via Schiff-base reaction to improve the macroscopic behavior of such kind of chitin graft elastomers. These sustainable elastomers are mechanically strong and show excellent reprocessablity, as well as outstanding UV-blocking property. This strategy is versatile and can inspire the further development of fully biobased sustainable materials from natural resources.

Magnetic-responsive Covalent Adaptable Networks

Covalent adaptable networks (CANs) are reprocessable polymers whose structural arrangement is based on the recombination of dynamic covalent bonds. Composite materials prepared by incorporating magnetic particles into CANs attract much attention due to their remote and precise control, fast response speed, high biological safety and strong penetration of magnetic stimuli. These properties often involve magnetothermal effect and direct magnetic-field guidance. Besides, some of them can also respond to light, electricity or pH values. Thus, they are favorable for soft actuators since various functions are achieved such as magnetic-assisted self-healing (heating or at ambient temperature), welding (on land or under water), shape-morphing, and so on. Although magnetic CANs just start to be studied in recent two years, their advances are promised to expand the practical applications in both cutting-edge academic and engineering fields. This review aims to summarize recent progress in magnetic-responsive CANs, including their design, synthesis and application.

Mechanically Robust and Chemically Recyclable Polyhydroxyurethanes from CO2-Derived Six-Membered Cyclic Carbonates

In the current context of sustainable chemistry development and new regulations, aminolysis of cyclic carbonate is one of the most promising routes to nonisocyanate polyurethanes, also called polyhydroxyurethanes (PHU). In this study, a new kind of shape memory PHU vitrimers with outstanding mechanical properties and chemical recyclability is prepared. The monomer employed for aminolysis to form the PHUs is bis(six-membered cyclic carbonate) of 4,4'-biphenol (BCC-BP), which is synthesized by bi(1,3-diol) precursors and CO₂. The synthetic strategy, isocyanate-free and employing CO₂ as a building block, is environmentally friendly and suits the concept of carbon neutrality. The thermal properties, mechanical properties, and dynamic behaviors of the PHUs are explored. The maximum breaking strength and elongation at break of the resultant PHUs reach 65 MPa and 452%, respectively, exceeding other reported PHU-based materials in combined performance. Such a PHU material can also lift up a load 4700 times heavier than its own weight by a shape recovery process. Finally, the bi(1,3-diol) can be regenerated through the alcoholysis of PHUs to realize chemical recycling. This work provides a feasibility study for a green synthetic approach and for designing a novel PHU material with outstanding properties.

Self-Healable Covalently Adaptable Networks Based on Disulfide Exchange

Introducing dynamic covalent bonding into thermoset polymers has received considerable attention because they can repair or recover when damaged, thereby minimizing waste and extending the service life of thermoset polymers. However, most of the yielded dynamic covalent bonds require an extra catalyst, high temperature and high-pressure conditions to trigger their self-healing properties. Herein, we report on a catalyst-free bis-dynamic covalent polymer network containing vinylogous urethane and disulfide bonds. It is revealed that the introduction of disulfide bonds significantly reduces the activation energy (reduced from 94 kJ/mol to 51 kJ/mol) of the polymer system for exchanging and promotes the self-healing efficiency (with a high efficiency of 86.92% after being heated at 100 °C for 20 h) of the material. More importantly, the mechanical properties of the healed materials are comparable to those of the initial ones due to the special bis-dynamic covalent polymer network. These results suggest that the bis-dynamic covalent polymer network made of disulfide and inter-vinyl ester bonds opens a new strategy for developing high-performance vitrimer polymers.

Masked Primary Amines for a Controlled Plastic Flow of Vitrimers

We present a simple method for increasing the reprocessability of vinylogous urethane (VU) vitrimers while decreasing the possibility of creep deformation at lower temperatures. In particular, varying amounts of triethylenetetramine were added as a comonomer to the curing VU formulation to ensure that all of the primary amines reacted to form enaminone cross-links, resulting in a network without reactive primary amine chain-ends. As a result, transamination was significantly slowed down because secondary amines are much less reactive to VU exchange. On the other hand, at higher temperatures, pendent primary amines can be released via a dynamic, endothermic exchange with a nearby less-reactive secondary amine, thereby (re)activating material flow. As a result, ambivalent viscoelastic behavior could be achieved without depolymerization by dynamically releasing pendent primary amines from vinylogous urethane polymer chains. Through careful comonomer selection, VU vitrimers with low viscosity at processing temperatures and at the same time high viscosity at service temperatures could be prepared without the use of catalysts or additives, leveraging the synergistic effects of mildly reactive functionalities through neighboring group participation.

Recyclable, malleable and intrinsically flame-retardant epoxy resin with catalytic transesterification

Flame retardancy and recyclability are two important issues in the research field of thermosets, particularly for epoxy resin (EP) with the biggest market share. It is of great importance, but rarely achievable, to integrate these properties simultaneously into EP. Herein, we report a facile way to prepare intrinsically flame-retardant epoxy vitrimers combining rapid recycling and multiple shape memory effects by introducing dynamic ester-linkages with catalytic transesterification activity into the crosslinking networks of EP. The flame-retardant epoxy vitrimers exhibited high T_g (∼110.7 °C), desirable thermal stability and excellent flame retardancy with UL-94 V-0 rating, and high LOI of ∼34%. Also, the value of the peak heat release rate (PHRR) and the total heat release (THR) showed 63% and 32% reduction, respectively. Meanwhile, flame-retardant epoxy vitrimers showed high malleability that could be reprocessed in 15 min at 200 °C without sacrificing the mechanical properties and flame retardancy. Moreover, the dynamic transesterification network allowed flame-retardant EP to access multiple shape memory effect. The design of flame-retardant epoxy vitrimers provide a prime example to foster the cyclic utilization of flame-retardant thermosetting polymers.

Vitrimers: Using Dynamic Associative Bonds to Control Viscoelasticity, Assembly, and Functionality in Polymer Networks

Vitrimers have been investigated in the past decade for their promise as recyclable, reprocessable, and self-healing materials. In this Viewpoint, we focus on some of the key open questions that remain regarding how the molecular-scale chemistry impacts macroscopic physical chemistry. The ability to design temperature-dependent complex viscoelastic spectra with independent control of viscosity and modulus based on knowledge of the dynamic bond and polymer chemistry is first discussed. Next, the role of dynamic covalent chemistry on self-assembly is highlighted in the context of crystallization and nanophase separation. Finally, the ability of dynamic bond exchange to manipulate molecular transport and viscoelasticity is discussed in the context of various applications. Future directions leveraging dynamic covalent chemistry to provide insights regarding fundamental polymer physics as well as imparting functionality into polymers are discussed in all three of these highlighted areas.

Recyclable, Self-Healing Solid Polymer Electrolytes by Soy Protein-Based Dynamic Network

Compared to traditional organic liquid electrolytes, which often present leakage, flammability, and chemical stability problems, solid polymer electrolytes (SPEs) are widely regarded as one of the most promising candidates for the development of safer lithium-ion batteries. Vitrimers are a new class of polymer materials consisting of dynamic covalent networks that can change their topology by thermally activated bond-exchange reactions. Herein, the recyclable and self-healing solid polymer electrolytes (SPEs) with a soy protein isolate (SPI)-based imine bond dynamic network are reported. This malleable covalent cross-linked network polymer can be reshaped and recycled at high temperature (100 °C) or only with water at ambient temperature (25 °C), which may realize the green processing of energy materials. The introduction of bis(trifluoromethane) sulfonimide lithium (LiTFSI) significantly reinforces the conductivity of the dynamic network to a maximum of 3.3 × 10-4 S cm-1 . This simple and applicable method establishes new principles for designing scalable and flexible strategies for fabricating polymer electrolytes.

Nanocomposites of Polyhydroxyurethane with POSS Microdomains: Synthesis via Non-Isocyanate Approach, Morphologies and Reprocessing Properties

In this contribution, we reported the synthesis of a novel trifunctional POSS cyclic carbonate [POSS-3(5CC)]. With a difunctional five-member cyclic carbonate and a trifunctional polyetheramine as the precursor, the nanocomposites of polyhydroxyurethane (PHU) with POSS were synthesized. Transmission electron microscopy (TEM) showed that the nanocomposites of PHUs with POSS were microphase-separated; the spherical POSS microdomains via POSS-POSS interactions were generated with the size of 20~40 nm in diameter. After the introduction of POSS microdomains, the nanocomposites displayed improved thermal and mechanical properties. More importantly, the nanocomposites still displayed the reprocessing properties of vitrimers.

Photoswitchable Covalent Adaptive Networks Based on Thiol-Ene Elastomers

Covalent adaptive networks combine the advantages of cross-linked elastomers and dynamic bonding in a single system. In this work, we demonstrate a simple one-pot method to prepare thiol-ene elastomers that exhibit reversible photoinduced switching from an elastomeric gel to fluid state. This behavior can be generalized to thiol-ene cross-linked elastomers composed of different backbone chemistries (e.g., polydimethylsiloxane, polyethylene glycol, and polyurethane) and vinyl groups (e.g., allyl, vinyl ether, and acrylate). Photoswitching from the gel to fluid state occurs in seconds upon exposure to UV light and can be repeated over at least 180 cycles. These thiol-ene elastomers also exhibit the ability to heal, remold, and serve as reversible adhesives.

Self-Strengthening, Self-Welding, Shape Memory, and Recyclable Polybutadiene-Based Material Driven by Dual-Dynamic Units

A covalent adaptable network can endow rubber materials with recyclability and reprocessability and is expected to alleviate black pollution caused by end-of-life rubber. However, the loss of traditional vulcanization systems severely sacrifices their strength, and the tensile strength in the current study rarely exceeds 10 MPa unless fillers are added. In this work, we proposed a self-strengthening process based on dual-dynamic units (imine and disulfide), briefly, under heating, phenylsulfur radicals generated from aromatic disulfide bonds can react with double bonds (mostly vinyl) and/or couple with allyl sites, thus reforming a stronger cross-linked network. The neighboring imine unit is not affected and provides excellent thermal reprocessability and chemical recyclability. The result shows that the tensile strength can reach 19.27 MPa via self-strengthening without adding fillers or any other additives, and this ultra-high-strength is much higher than those of all known recyclable polybutadiene-based rubber materials. In addition, the material also has malleability, shape memory, and self-welding properties. By doping carbon nanotubes, a recyclable conductive composite can also be achieved. In general, we envision that this enhanced strategy has great potential to be generalized for all elastomers containing double bonds (such as styrene-butadiene rubber, nitrile rubber, isoprene rubber, and their derivatives). The reprocessability and self-welding are practical for on-site assembly or repair of composite parts and extend the service life of materials.

Taking advantage of β-hydroxy amine enhanced reactivity and functionality for the synthesis of dual covalent adaptable networks

This study highlights the potential of β-hydroxy amines as building blocks for aza-Michael CANs.

Materials for Smart Soft Actuator Systems

In contrast to conventional hard actuators, soft actuators offer many vivid advantages, such as improved flexibility, adaptability, and reconfigurability, which are intrinsic to living systems. These properties make them particularly promising for different applications, including soft electronics, surgery, drug delivery, artificial organs, or prosthesis. The additional degree of freedom for soft actuatoric devices can be provided through the use of intelligent materials, which are able to change their structure, macroscopic properties, and shape under the influence of external signals. The use of such intelligent materials allows a substantial reduction of a device's size, which enables a number of applications that cannot be realized by externally powered systems. This review aims to provide an overview of the properties of intelligent synthetic and living/natural materials used for the fabrication of soft robotic devices. We discuss basic physical/chemical properties of the main kinds of materials (elastomers, gels, shape memory polymers and gels, liquid crystalline elastomers, semicrystalline ferroelectric polymers, gels and hydrogels, other swelling polymers, materials with volume change during melting/crystallization, materials with tunable mechanical properties, and living and naturally derived materials), how they are related to actuation and soft robotic application, and effects of micro/macro structures on shape transformation, fabrication methods, and we highlight selected applications.

Trends in non-isocyanate polyurethane (NIPU) development

The transition towards safer and more sustainable production of polymers has led to a growing body of academic research into non-isocyanate polyurethanes (NIPUs) as potential replacements for conventional, isocyanate-based polyurethane materials. This perspective article focuses on the opportunities and current limitations of NIPUs produced by the reaction between biobased cyclic carbonates with amines, which offers an interesting pathway to renewable NIPUs. While it was initially thought that due to the similarities in the chemical structure, NIPUs could be used to directly replace conventional polyurethanes (PU), this has proven to be more challenging to achieve in practice. As a result, and in spite of the vast amount of academic research into this topic, the market size of NIPUs remains negligible. In this perspective, we will emphasize the main limitations of NIPUs in comparison to conventional PUs and the most significant advances made by others and us to overcome these limitations. Finally, we provide our personal view of where research should be directed to promote the transition from the academic to the industrial sector.

Dynamic Covalent Polyurethane Network Materials: Synthesis and Self-Healability

Polyurethane (PU) has not only been widely used in the daily lives, but also extensively explored as an important class of the essential polymers for various applications. In recent years, significant efforts have been made on the development of self-healable PU materials that possess high performance, extended lifetime, great reliability, and recyclability. A promising approach is the incorporation of covalent dynamic bonds into the design of PU covalently crosslinked polymers and thermoplastic elastomers that can dissociate and reform indefinitely in response to external stimuli or autonomously. This review summarizes various strategies to synthesize self-healable, reprocessable, and recyclable PU materials integrated with dynamic (reversible) Diels-Alder cycloadduct, disulfide, diselenide, imine, boronic ester, and hindered urea bond. Furthermore, various approaches utilizing the combination of dynamic covalent chemistries with nanofiller surface chemistries are described for the fabrication of dynamic heterogeneous PU composites.

Covalent Adaptable Networks Using β-Amino Esters as Thermally Reversible Building Blocks

In this study, β-amino esters, prepared by the aza-Michael addition of an amine to an acrylate moiety, are investigated as building blocks for the formation of dynamic covalent networks. While such amino esters are usually considered as thermally nondynamic adducts, the kinetic model studies presented here show that dynamic covalent exchange occurs via both dynamic aza-Michael reaction and catalyst-free transesterification. This knowledge is transferred to create β-amino ester-based covalent adaptable networks (CANs) with coexisting dissociative and associative covalent dynamic exchange reactions. The ease, robustness, and versatility of this chemistry are demonstrated by using a variety of readily available multifunctional acrylates and amines. The presented CANs are reprocessed via either a dynamic aza-Michael reaction or a catalyst-free transesterification in the presence of hydroxyl moieties. This results in reprocessable, densely cross-linked materials with a glass transition temperature (T_g) ranging from -60 to 90 °C. Moreover, even for the low T_g materials, a high creep resistance was demonstrated at elevated temperatures up to 80 °C. When additional β-hydroxyl group-containing building blocks are applied during the network design, an enhanced neighboring group participation effect allows reprocessing of materials up to 10 times at 150 °C within 30 min while maintaining their material properties.

Dually cross-linked single networks: structures and applications

Cross-linked polymers have attracted an immense attention over the years, however, there are many flaws of these systems, e.g. softness and brittleness; such materials possess non-adjustable properties and cannot recover from damage and thus are limited in their practical applications. Supramolecular chemistry offers a variety of dynamic interactions that when integrated into polymeric gels endow the systems with reversibility and responsiveness to external stimuli. A combination of different cross-links in a single gel could be the key to tackle these drawbacks, since covalent or chemical cross-linking serve to maintain the permanent shape of the material and to improve overall mechanical performance, whereas non-covalent cross-links impart dynamicity, reversibility, stimuli-responsiveness and often toughness to the material. In the present review we sought to give a comprehensive overview of the progress in design strategies of different types of dually cross-linked single gels made by researchers over the past decade as well as the successful implementations of these advances in many demanding fields where versatile multifunctional materials are required, such as tissue engineering, drug delivery, self-healing and adhesive systems, sensors as well as shape memory materials and actuators.

Biobased Nonisocyanate Polyurethanes as Recyclable and Intrinsic Self-Healing Coating with Triple Healing Sites

Polymer coatings having high amounts of renewable carbon and self-healing properties are highly sought after in a sustainability perspective. We report here the development of bio-/CO₂-derived nonisocyanate polyurethane (NIPU) coatings which are recyclable and healable via three different types of healing mechanisms. These NIPUs contain furan rings in their main chain which after cross-linking with bismaleimides form organogels having a thermo-reversible sol-gel transition and solvent-borne coatings with improved properties. Judicial selection of the bismaleimide cross-linker structure enabled us to produce recyclable and intrinsic healable coatings mediated by heat (thermo-healing), moisture (moisture-healing), and, more interestingly, dry conditions at room temperature (self-healing). The intrinsic moisture-healing property of NIPU-based coatings is unprecedented and is mainly due to the presence of hydroxyl functionalities in the NIPU structure. The uniqueness of these cross-linked biobased NIPU as recyclable coatings having triple healing sites present in their structure gives these materials potential for sustainable and functional applications.

Preparation of chitosan biguanidine/PANI-containing self-healing semi-conductive waterborne scaffolds for bone tissue engineering

Electrically conducting self-healing scaffolds are known as a new series of intelligent biomaterial for regulating Human Adipose Mesenchymal Stem Cells biological behaviors, especially their differentiation to bone cells. Herein, we developed a novel hydrophilic semi-conductive chitosan derivative (CP) and loaded it into the self-healing waterborne polyurethane structure, as a new osteogenic agent. The fabricated scaffolds exhibited excellent shape memory properties with shape fixity (> 97 %) and shape recovery ratio (> 98 %) with excellent self-healing value (> 93 %) at a temperature close to the body temperature. The results of MTT, cell attachment, alkaline phosphatase activity, and alizarin red staining analysis demonstrated that the CP-contained scaffolds promote proliferation of hADSCs and matrix mineralization. Also, by introducing the CP the gene expression level of COL-1, ALP, RUNX2, and OCN were significantly enhanced, in line with matrix mineralization. These multifunctional engineered constructs are promising biomaterials for repairing various bone defects.