Polyserotonin Nanoparticles as Multifunctional Materials for Biomedical Applications

Toward nano-sized imprinted norepinephrine-derived biopolymer as artificial receptors for detecting IgG1 by surface plasmon resonance

Bio-based nanostructured molecularly imprinted polymers (nano-MIPs), also known as 'plastibodies', have a real potential to be used as alternatives to natural antibodies. These nanostructures have recently gained significant attention for diagnostic and therapeutic purposes. In this context, we have developed polynorepinephrine (PNE)-based nano-MIPs using an eco-friendly one-pot process for the sensitive and selective detection of a model biomolecule, immunoglobulin IgG1. We first investigated non-imprinted nanostructures (nano-NIPs) based on polydopamine as reference material, using DLS, SEM, and UV-Vis spectroscopy. Subsequently, PNE scaffolds were characterized, both in the form of nano-NIPs and nano-MIPs. Concerning nano-MIPs, we used the epitope-directed imprinting technology to create binding cavities using a small peptide from the constant region of IgG1 as a template. Nano-MIPs were initially immobilized on a sensing surface to assess their binding capacity via surface plasmon resonance (SPR) spectroscopy. This strategy showed very good sensitivity, outperforming planar PNE-based imprinted films while keeping a high selectivity even in complex biological matrices such as human serum. Furthermore, we confirmed the presence of selective binding sites on nano-MIPs by flowing them, along with nano-NIPs, through a microfluidic SPR system, where they interact with the covalently immobilized analyte. This approach resulted in a good imprinting factor of 4.5. Overall, this study underscores the broad potential of these nanostructures as a viable and reusable alternative to antibodies across a variety of bioanalytical, biochemical, and immunohistochemistry analysis techniques.

Sonochemical Synthesis of Natural Polyphenolic Nanoparticles for Modulating Oxidative Stress

Natural polyphenolic compounds play a vital role in nature and are widely utilized as building blocks in the fabrication of emerging functional nanomaterials. Although diverse fabrication methodologies are developed in recent years, the challenges of purification, uncontrollable reaction processes and additional additives persist. Herein, a modular and facile methodology is reported toward the fabrication of natural polyphenolic nanoparticles. By utilizing low frequency ultrasound (40 kHz), the assembly of various natural polyphenolic building blocks is successfully induced, allowing for precise control over the particle formation process. The resulting natural polyphenolic nanoparticles possessed excellent in vitro antioxidative abilities and in vivo therapeutic effects in typical oxidative stress models including wound healing and acute kidney injury. This study opens new avenues for the fabrication of functional materials from naturally occurring building blocks, offering promising prospects for future advancements in this field.

3D Bioprinting-Based Dopamine-Coupled Flexible Material for Nasal Cartilage Repair

INTRODUCTION

Since 3D printing can be used to design implants according to the specific conditions of patients, it has become an emerging technology in tissue engineering and regenerative medicine. How to improve the mechanical, elastic and adhesion properties of 3D-printed photocrosslinked hydrogels is the focus of cartilage tissue repair and reconstruction research.

MATERIALS AND METHODS

We established a strategy for toughening hydrogels by mixing GelMA-DOPA (GD), which is prepared by coupling dopamine (DA) with GelMA, with HAMA, bacterial cellulose (BC) to produce composite hydrogels (HB-GD). HB-GD hydrogel scaffolds were characterized in vitro by scanning electron microscopy (SEM), Young's modulus, swelling property and rheological property tests. And biocompatibility and chondrogenic ability were tested by live/dead staining, DNA quantitative analysis and immunofluorescence staining. Combined with 3D bioprinting technology, mouse chondrocytes (ADTC5) were added to form a biological chain to construct an in vitro model, and the feasibility of the model for nasal cartilage regeneration was verified by cytology evaluation.

RESULTS

With the increase of GD concentration, the toughness of the composite hydrogel increased (47.0 ± 2.7 kPa (HB-5GD)-158 ± 3.2 kPa (HB-20GD)), and it had excellent swelling properties, rheological properties and printing properties. The HB-GD composite hydrogel promoted the proliferation and differentiation of ATDC5. Cells in 3D printed scaffolds had higher survival rates (> 95%) and better protein expression than the encapsulated cultures.

CONCLUSION

The HB-10GD hydrogel can be made into a porous scaffold with precise shape, good internal pore structure, high mechanical strength and good swelling rate through extrusion 3D printing.

NO LEVEL ASSIGNED

This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

The In Vivo Fate of Polycatecholamine Coated Nanoparticles Is Determined by a Fibrinogen Enriched Protein Corona

Polycatecholamine coatings have attracted significant attention in the past 10 years owing to their ability to functionalize a wide range of materials. Here we apply the use of such coatings to drug nanocrystals, made from a poorly soluble drug compound, to postfunctionalize the nanocrystal surface with the aim of providing steric stabilization and extending their circulation time after intravenous injection. We show that both polydopamine and polynorepinephrine can be used to successfully modify drug nanocrystals and subsequently incorporate end-functionalized PEG to the surface. Even though high grafting densities of PEG were achieved, we observed rapid clearance and increased liver uptake for polycatecholamine functionalized drug nanocrystals. Using both surface sensitive model systems and protein corona profiling, we determine that the rapid clearance was correlated with an increase in adsorption of proteins involved in coagulation to the polycatecholamine surface, with fibrinogen being the most abundant. Further analysis of the most abundant proteins revealed a significant increase in thiol-rich proteins on polycatecholamine coated surfaces. The observed interaction with coagulation proteins highlights one of the current challenges using polycatecholamines for drug delivery but might also provide insights to the growing use of these materials in hemostatic applications.

Serotonin: A new super effective functional monomer for molecular imprinting. The case of TNF-α detection in real matrix by Surface Plasmon Resonance

Molecular imprinting and related technologies are becoming increasingly appreciated in bioanalysis and diagnostic applications. Among the imprinted polymers, we have already demonstrated that the endogenous neurotransmitters (NTs) dopamine (DA) and norepinephrine (NE) can be efficiently used as natural and sustainable monomers to straightforwardly design and synthesize a new generation of green and "soft" Molecularly Imprinted BioPolymers (MIBPs). Here, we demonstrated for the first time the ability of a further NT, i.e., serotonin (SE), in forming adhesive imprinted nanofilms coupled to label-free optical biosensing. Its imprinting efficiency is compared with those obtained with PDA and PNE. As a model study, tumor necrosis factor-alpha (TNF-α) was selected as a biomolecular target of interest in clinical diagnostics. The biomimetic receptor was coupled to Surface Plasmon Resonance (SPR), and TNF-α detection was performed in label-free and real-time manner both in buffer and biological matrices, i.e. synovial fluid and human serum. The results indicate that, under the same imprinting and binding conditions, the analytical performances of PSE are impressively superior to those of PDA and PNE. The PSE-based MIBP was able to detect TNF-α in human matrices with a good sensitivity, selectivity, and repeatability.

Surface engineering Salmonella with pH-responsive polyserotonin and self-activated DNAzyme for better microbial therapy of tumor

Bacteria-based microbial immunotherapy shows various unique properties for tumor therapy owing to their active tropism to tumor and multiple anti-tumor mechanisms. However, its clinical benefit is far from satisfactory, which is limited by rapid systemic clearance and neutrophils-mediated immune restriction to compromise the efficacy, as well as non-specific distribution to cause toxicity. To address all these limitations, herein we reported a polyserotonin (PST) coated Salmonella (Sal) with surface adsorption of DNAzyme (Dz)-functionalized MnO2 nanoparticles (DzMN) for tumor therapy. PST could facilely coat on Sal surface via oxidation and self-polymerization of its serotonin monomer, which enabled surface stealth to avoid rapid systemic clearance while maintaining the tumor homing effect. Upon targeting to tumor, the PST was degraded and exfoliated in response to acidic tumor microenvironment, thus liberating Sal to recover its anti-tumor activities. Meanwhile, the DzMN was also delivered into tumor via hitchhiking Sal, which could release Dz and Mn2+ after tumor cells internalization. The Dz was then activated by its cofactor of Mn2+ to cleave target PD-L1 mRNA, thus serving as a self-activated system for gene silencing. Combining Sal and Dz for immune activation and PD-L1 knockdown, respectively, anti-tumor immunotherapy was achieved with enhanced efficacy. Notably, PST coating could significantly decrease infection potential and non-specific colonization of Sal at normal organs, achieving high in vivo biosafety. This work addresses the key limitations of Sal for in vivo application via biomaterials modification, and provides a promising platform for better microbial immunotherapy.

Molecularly Imprinted Polymer Interface on Screen-Printed ZnO Nanorod Field Effect Transistors for Serotonin Detection in Clinical Samples

Ultrasensitive detection of serotonin is crucial for the early diagnosis of several diseases like Parkinson's and Alzheimer's. Most of the existing detection strategies are still not suitable for sensitive point-of-care applications. This study presents direct molecular imprinting of serotonin on the surface of three-dimensional zinc oxide (ZnO) nanorod devices connected in a field effect transistor (FET) configuration to achieve ultrasensitive, real-time, and rapid detection with a convenient and affordable approach, which has significant potential for translation to clinical settings. This strategy has enabled pushing the detection limit to 0.1 fM in a physiological analyte in real time with screen-printed electrodes, thereby resulting in the convenient batch fabrication of sensors for clinical validation. The response of the sensor with the clinical sample has been correlated with that of the gold standard and has been observed to be statistically similar.

Self-immolative nanocapsules precisely regulate depressive neuronal microenvironment for synergistic antidepression therapy

BACKGROUND

Pharmacotherapy constitutes the first-line treatment for depression. However, its clinical use is hindered by several limitations, such as time lag, side effects, and narrow therapeutic windows. Nanotechnology can be employed to shorten the onset time by ensuring permeation across the blood brain barrier (BBB) to precisely deliver more therapeutic agents; unfortunately, formidable challenges owing to the intrinsic shortcomings of commercial drugs remain.

RESULTS

Based on the extraordinary capability of monoamines to regulate the neuronal environment, we engineer a network nanocapsule for delivering serotonin (5-hydroxytryptamine, 5-HT) and catalase (CAT) to the brain parenchyma for synergistic antidepression therapy. The nanoantidepressants are fabricated by the formation of 5-HT polymerization and simultaneous payload CAT, following by surface modifications using human serum albumin and rabies virus glycoprotein. The virus-inspired nanocapsules benefit from the surface-modifying strategies and exhibit pronounced BBB penetration. Once nanocapsules reach the brain parenchyma, the mildly acidic conditions trigger the release of 5-HT from the sacrificial nanocapsule. Releasing 5-HT further positively regulate moods, relieving depressive symptoms. Meanwhile, cargo CAT alleviates neuroinflammation and enhances therapeutic efficacy of 5-HT.

CONCLUSION

Altogether, the results offer detailed information encouraging the rational designing of nanoantidepressants and highlighting the potential of nanotechnology in mental health disorder therapies.

Repair of degenerative nucleus pulposus by polyphenol nanosphere-encapsulated hydrogel gene delivery system

Intervertebral disc degeneration (IDD) progresses due to local inflammatory response, gradually unbalanced anabolic/catabolic activity, and progressive functional impairment within the nucleus pulposus. Antagomir-21, a cholesterol-modified miRNA-21 inhibitor, has potential extracellular matrix (ECM) regenerative ability, but its application for IDD is limited by inadequate local delivery systems. An injectable hydrogel gene delivery system encapsulating a modified tannic acid nanoparticles (TA NPs) vector was engineered for on-demand and sustained delivery of antagomir-21 into the nucleus pulposus. After nucleus pulposus cell uptake, antagomir-21 was released from TA NPs and regulated the ECM metabolic balance by inhibiting the MAPK/ERK signaling pathway. TA NPs scavenged intracellular ROS and reduced inflammation by downregulating TNF-α expression. In vivo, synergistic anti-inflammatory effects and ECM regeneration effectively promoted therapeutic efficacy against IDD. This hydrogel gene delivery system represents a creative, promising strategy for IDD repair.

Serotonin-Derived Fluorophore: A Novel Fluorescent Biomaterial for Copper Detection in Urine

We took advantage of the fluorescent features of a serotonin-derived fluorophore to develop a simple and low-cost assay for copper in urine. The quenching-based fluorescence assay linearly responds within the concentration range of clinical interest in buffer and in artificial urine, showing very good reproducibility (CV_av% = 4% and 3%) and low detection limits (16 ± 1 μg L^-1 and 23 ± 1 μg L^-1). The Cu²⁺ content was also estimated in human urine samples, showing excellent analytical performances (CV_av% = 1%), with a limit of detection of 59 ± 3 μg L^-1 and a limit of quantification of 97 ± 11 μg L^-1, which are below the reference value for a pathological Cu²⁺ concentration. The assay was successfully validated through mass spectrometry measurements. To the best of our knowledge, this is the first example of copper ion detection exploiting the fluorescence quenching of a biopolymer, offering a potential diagnostic tool for copper-dependent diseases.

Computational Biomaterials: Computational Simulations for Biomedicine

With the flourishing development of material simulation methods (quantum chemistry methods, molecular dynamics, Monte Carlo, phase field, etc.), extensive adoption of computing technologies (high-throughput, artificial intelligence, machine learning, etc.), and the invention of high-performance computing equipment, computational simulation tools have sparked the fundamental mechanism-level explorations to predict the diverse physicochemical properties and biological effects of biomaterials and investigate their enormous application potential for disease prevention, diagnostics, and therapeutics. Herein, the term "computational biomaterials" is proposed and the computational methods currently used to explore the inherent properties of biomaterials, such as optical, magnetic, electronic, and acoustic properties, and the elucidation of corresponding biological behaviors/effects in the biomedical field are summarized/discussed. The theoretical calculation of the physiochemical properties/biological performance of biomaterials applied in disease diagnosis, drug delivery, disease therapeutics, and specific paradigms such as biomimetic biomaterials is discussed. Additionally, the biosafety evaluation applications of theoretical simulations of biomaterials are presented. Finally, the challenges and future prospects of such computational simulations for biomaterials development are clarified. It is anticipated that these simulations would offer various methodologies for facilitating the development and future clinical translations/utilization of versatile biomaterials.

Bio-macromolecular design roadmap towards tough bioadhesives

Emerging sutureless wound-closure techniques have led to paradigm shifts in wound management. State-of-the-art biomaterials offer biocompatible and biodegradable platforms enabling high cohesion (toughness) and adhesion for rapid bleeding control as well as robust attachment of implantable devices. Tough bioadhesion stems from the synergistic contributions of cohesive and adhesive interactions. This Review provides a biomacromolecular design roadmap for the development of tough adhesive surgical sealants. We discuss a library of materials and methods to introduce toughness and adhesion to biomaterials. Intrinsically tough and elastic polymers are leveraged primarily by introducing strong but dynamic inter- and intramolecular interactions either through polymer chain design or using crosslink regulating additives. In addition, many efforts have been made to promote underwater adhesion via covalent/noncovalent bonds, or through micro/macro-interlock mechanisms at the tissue interfaces. The materials settings and functional additives for this purpose and the related characterization methods are reviewed. Measurements and reporting needs for fair comparisons of different materials and their properties are discussed. Finally, future directions and further research opportunities for developing tough bioadhesive surgical sealants are highlighted.

Photothermal Nano-Vaccine Promoting Antigen Presentation and Dendritic Cells Infiltration for Enhanced Immunotherapy of Melanoma via Transdermal Microneedles Delivery

Immunotherapy has demonstrated the potential to cure melanoma, while the current response rate is still unsatisfactory in clinics. Extensive evidence indicates the correlation between the efficacy and pre-existing T-cell in tumors, whereas the baseline T-cell infiltration is lacking in low-response melanoma patients. Herein, we demonstrated the critical contribution of dendritic cells (DCs) on melanoma survival and baseline T-cell level, as well as the efficacy of immunotherapy. Capitalized on this fact, we developed a photothermal nano-vaccine to simultaneously promote tumor antigens presentation and DCs infiltration for enhanced immunotherapy. The nano-vaccine was composed of polyserotonin (PST) core and tannic acid (TA)/Mn2+ coordination-based metal-organic-framework (MOF) shell for β-catenin silencing DNAzyme loading, which was further integrated into dissolving microneedles to allow noninvasive and transdermal administration at melanoma skin. The nano-vaccine could rapidly penetrate skin upon microneedles insertion and exert a synergistically amplified photothermal effect to induce immunogenic cell death (ICD). The MOF shell then dissociated and released Mn2+ as a cofactor to self-activate DNAzyme for β-catenin suppression, which in turn caused a persistent CCL4 excretion to promote the infiltration of DCs into the tumor. Meanwhile, the liberated PST core could effectively capture and facilitate tumor antigens presentation to DCs. As a result, potent antitumor efficacies were achieved for both primary and distal tumors without any extra treatment, indicating the great promise of such a nano-vaccine for on-demand personalized immunotherapy of melanoma.

Bubble-pen lithography: Fundamentals and applications: Nanoscience: Special Issue Dedicated to Professor Paul S. Weiss

Developing on-chip functional devices requires reliable fabrication methods with high resolution for miniaturization, desired components for enhanced performance, and high throughput for fast prototyping and mass production. Recently, laser-based bubble-pen lithography (BPL) has been developed to enable sub-micron linewidths, in situ synthesis of custom materials, and on-demand patterning for various functional components and devices. BPL exploits Marangoni convection induced by a laser-controlled microbubble to attract, accumulate, and immobilize particles, ions, and molecules onto different substrates. Recent years have witnessed tremendous progress in theory, engineering, and application of BPL, which motivated us to write this review. First, an overview of experimental demonstrations and theoretical understandings of BPL is presented. Next, we discuss the advantages of BPL and its diverse applications in quantum dot displays, biological and chemical sensing, clinical diagnosis, nanoalloy synthesis, and microrobotics. We conclude this review with our perspective on the challenges and future directions of BPL.

Next-Generation Colloidal Materials for Ultrasound Imaging Applications

Ultrasound has important applications, predominantly in the field of diagnostic imaging. Presently, colloidal systems such as microbubbles, phase-change emulsion droplets and particle systems with acoustic properties and multiresponsiveness are being developed to address typical issues faced when using commercial ultrasound contrast agents, and to extend the utility of such systems to targeted drug delivery and multimodal imaging. Current technologies and increasing research data on the chemistry, physics and materials science of new colloidal systems are also leading to the development of more complex, novel and application-specific colloidal assemblies with ultrasound contrast enhancement and other properties, which could be beneficial for multiple biomedical applications, especially imaging-guided treatments. In this article, we review recent developments in new colloids with applications that use ultrasound contrast enhancement. This work also highlights the emergence of colloidal materials fabricated from or modified with biologically derived and bio-inspired materials, particularly in the form of biopolymers and biomembranes. Challenges, limitations, potential developments and future directions of these next-generation colloidal systems are also presented and discussed.

Surface Characteristics and Formation of Polyserotonin Thin Films for Bioelectrical and Biocompatible Interfaces

In this study, we examined the fundamental surface characteristics of a polyserotonin (pST) film, which is attractive as a bioelectrical and biocompatible interface of biosensors. The pST film can easily be modified on electrode materials such as Au by self-polymerization and electropolymerization. By a simple cytotoxicity test using nonadhesive living cells, we found that the pST film is biocompatible for culturing cells on it. This finding is also supported by the fact that the surface tension of the pST film is moderate for protein adsorptions. The pST film is thinner and smoother than a poly-dopamine film, the chemical structure of which is similar to that of the pST film, depending on the polymerization time, cycle, and temperature; thus, ST as the main monomer can facilitate the precise control of the thickness and roughness of functional polymer membranes on the nanometer order. In addition, the pST film is useful as a relatively insulative interface for preventing interfering species from approaching electrode surfaces without their nonspecific adsorption, depending on the surface charges of the pST film in solutions of different pHs. The formation of the pST film self-polymerized on electrode materials is derived from the adsorption of pST nanoparticles formed by oxidative polymerization under basic conditions; therefore, the process of pST film formation should be considered in the functionalization of the pST film as a bioelectrical interface that allows biomolecular recognition (e.g., molecularly imprinted polymer membrane) for its application to wearable and biocompatible biosensors.

Buffer Components Incorporate into the Framework of Polyserotonin Nanoparticles and Films during Synthesis

Polyserotonin nanoparticles (PSeNP) and films are bioinspired nanomaterials that have potential in biomedical applications and surface coatings. As studies on polyserotonin (PSe) nanoparticles and films are still in their infancy, synthetic pathways and material development for this new class of nanomaterial await investigation. Here, we sought to determine how different buffers used during the polymerization of serotonin to form nanoparticles and films impact the physicochemical properties of PSe materials. We show that buffer components are incorporated into the polymer matrix, which is also supported by density functional theory calculations. While we observed no significant differences between the elasticity of nanoparticles synthesized in the different buffers, the nanoscale surface properties of PSe films revealed dissimilarities in surface functional groups influenced by solvent molecules. Overall, the results obtained in this work can be used towards the rational design of PSe nanomaterials with tailored properties and for specific applications.

Polyserotonin as a versatile coating with pH-responsive degradation for anti-tumor therapy

Through self-polymerization of serotonin monomer, polyserotonin (PST) can coat on arbitrary surfaces with pH-responsive degradation, which was employed for nanoparticle coating and controlled drug release, achieving a robust anti-tumor effect when combined with its intrinsic photothermal effect.

Nanoparticles Accumulate in the Female Reproductive System during Ovulation Affecting Cancer Treatment and Fertility

Throughout the female menstrual cycle, physiological changes occur that affect the biodistribution of nanoparticles within the reproductive system. We demonstrate a 2-fold increase in nanoparticle accumulation in murine ovaries and uterus during ovulation, compared to the nonovulatory stage, following intravenous administration. This biodistribution pattern had positive or negative effects when drug-loaded nanoparticles, sized 100 nm or smaller, were used to treat different cancers. For example, treating ovarian cancer with nanomedicines during mouse ovulation resulted in higher drug accumulation in the ovaries, improving therapeutic efficacy. Conversely, treating breast cancer during ovulation, led to reduced therapeutic efficacy, due to enhanced nanoparticle accumulation in the reproductive system rather than at the tumor site. Moreover, chemotherapeutic nanoparticles administered during ovulation increased ovarian toxicity and decreased fertility compared to the free drug. The menstrual cycle should be accounted for when designing and implementing nanomedicines for females.

Intrinsic Radical Species Scavenging Activities of Tea Polyphenols Nanoparticles Block Pyroptosis in Endotoxin-Induced Sepsis

Sepsis, a life-threating illness caused by deregulated host immune responses to infections, is characterized by overproduction of multiple reactive oxygen and nitrogen species (RONS) and excessive pyroptosis, leading to high mortality. However, there is still no approved specific molecular therapy to treat sepsis. Here we reported drug-free tea polyphenols nanoparticles (TPNs) with intrinsic broad-spectrum RONS scavenging and pyroptosis-blocking activities to treat endotoxin (LPS)-induced sepsis in mice. The RONS scavenging activities originated from the polyphenols-derived structure, while the pyroptosis blockage was achieved by inhibiting gasdermin D (GSDMD) mediating the pore formation and membrane rupture, showing multifunctionalities for sepsis therapy. Notably, TPNs suppress GSDMD by inhibiting the oligomerization of GSDMD rather than the cleavage of GSDMD, thus displaying high pyroptosis-inhibition efficiency. As a result, TPNs showed an excellent therapeutic efficacy in sepsis mice model, as evidenced by survival rate improvement, hypothermia amelioration, and the organ damage protection. Collectively, TPNs present biocompatible candidates for the treatment of sepsis.

Hytrin loaded polydopamine-serotonin nanohybrid induces IDH2 mediated neuroprotective effect to alleviate Parkinson's disease

Parkinson's disease (PD) is the second most neurodegenerative disease caused due to synucleinopathy leads to the death of dopaminergic and serotonergic neurons. The approach to reduce synucleinopathy paves the therapeutic way in PD management. Recent studies highlight anti-Parkinsonism effect of Hytrin that regulates energy homeostasis via activation of mitochondrial redox regulator; IDH2 leading to attenuation of synucleinopathy. However, the burst release kinetics of Hytrin restricts its therapeutic potential. Therefore, we aimed to improve Hytrin release kinetics through nanocarrier mediated delivery, replenish dopamine and serotonin by formulating Hytrin loaded polydopamine serotonin nanohybrid for PD protection. Present study also explores IDH2 mediated neuroprotective action in retardation of synucleinopathy for PD prevention. Nanoformulation has shown effective neurotherapeutic potential by improving Hytrin release profile in the reduction of PD symptoms in vitro and ex vivo. The neuroprotective effect has been attributed to IDH2 induction and alpha-synuclein reduction against rotenone insults. The direct physical interaction of IDH2 and alpha-synuclein, PD hallmark has been uncovered. The study divulges that the restorative effect of our nanoformulation significantly retards the PD deficits byinducing IDH2 mediated alpha-synuclein ubiquitination and proteasomal degradation pathway.

Aptamer-modified biosensors to visualize neurotransmitter flux

Chemical biosensors with the capacity to continuously monitor various neurotransmitter dynamics can be powerful tools to understand complex signaling pathways in the brain. However, in vivo detection of neurochemicals is challenging for many reasons such as the rapid release and clearance of neurotransmitters in the extracellular space, or the low target analyte concentrations in a sea of interfering biomolecules. Biosensing platforms with adequate spatiotemporal resolution coupled to specific and selective receptors termed aptamers, demonstrate high potential to tackle such challenges. Herein, we review existing literature in this field. We first discuss nanoparticle-based systems, which have a simple in vitro implementation and easily interpretable results. We then examine methods employing near-infrared detection for deeper tissue imaging, hence easier translation to in vivo implementation. We conclude by reviewing live cell imaging of neurotransmitter release via aptamer-modified platforms. For each of these sensors, we discuss the associated challenges for translation to real-time in vivo neurochemical imaging. Realization of in vivo biosensors for neurotransmitters will drive future development of early prevention strategies, treatments, and therapeutics for psychiatric and neurodegenerative diseases.

Enzyme-Induced Transformable Peptide Nanocarriers with Enhanced Drug Permeability and Retention to Improve Tumor Nanotherapy Efficacy

Temporal persistence is as important for nanocarriers as spatial accuracy. However, because of the insufficient aggreagtion and short retention time of chemotherapy drugs in tumors, their clinical application is greatly limited. A drug delivery approach dependent on the sensitivity to an enzyme present in the microenvironment of the tumor is designed to exhibit different sizes in different sites, achieving enhanced drug permeability and retention to improve tumor nanotherapy efficacy. In this work, we report a small-molecule peptide drug delivery system containing both tumor-targeting groups and enzyme response sites. This system enables the targeted delivery of peptide nanocarriers to tumor cells and a unique response to alkaline phosphatase (ALP) in the tumor microenvironment to activate morphological transformation and drug release. The amphiphilic peptide AYR self-aggregated into a spherical nanoparticle structure after encapsulating the lipid-soluble model drug doxorubicin (DOX) and rapidly converted to nanofibers via the induction of ALP. This morphological transformation toward a high aspect ratio allowed rapid, as well as effective drug release to tumor location while enhancing specific toxicity to tumor cells. Interestingly, this "transformer"-like drug delivery strategy can enhance local drug accumulation and effectively inhibit drug efflux. In vitro along with in vivo experiments further proved that the permeability and retention of antitumor drugs in tumor cells and tissues were significantly enhanced to reduce toxic side effects, and the therapeutic effect was remarkably improved compared with that of nondeformable drug-loaded peptide nanocarriers. The developed AYR nanoparticles with the ability to undergo morphological transformation in situ can improve local drug aggregation and retention time at the tumor site. Our findings provide a new and simple method for nanocarrier morphology transformation in novel cancer treatments.

Therapeutic Nanoparticles from Grape Seed for Modulating Oxidative Stress

The therapeutic potential of nanomaterials toward oxidative damage relevant diseases has attracted great attentions by offering promising advantages compared with conventional antioxidants. Although different kinds of nanoantioxidants have been well developed, the facile fabrication of robust and efficient nanoscavengers is still met with challenges like the use of toxic and high-cost subunits, the involvement of multistep synthetic process, and redundant purification work. Herein, a direct fabrication strategy toward polyphenol nanoparticles with tunable size, excellent biocompatibility, and reactive oxygen species (ROS) scavenging capacities from grape seed via an enzymatic polymerization method is reported. The resulting nanoparticles can efficiently prevent cell damage from ROS and exert promising in vivo antioxidant therapeutic effects on several oxidative stress-related diseases, including accelerating wound healing, inhibiting ulcerative colitis, and regulating the oxidative stress in dry eye disease. This study can stimulate the development of more kinds of low-cost, safe, and efficient biomass-based antioxidative nanomaterials via similar fabrication methodologies.

Capsule-like molecular imprinted polymer nanoparticles for targeted and chemophotothermal synergistic cancer therapy

Selective cancer cell targeting, controlled drug release, easy construction and multiple therapeutic modalities are some of the desirable characteristics of drug delivery systems. We designed and built simple capsule-like molecular imprinted polymer (MIP)-based nanoparticles for targeted and chemo-photothermal synergistic cancer therapy. Using dopamine (DA) as functional monomer, cross-linking agent as well as photo-thermal agent, ZIF-8 (zeoliticimidazolate framework-8) as drug carrier, epitope of EGFR (epidermal growth factor receptor) as template molecules, molecular imprinted polymer (MIP) drug carrier was constructed. The ability of MIP layer to bind to EGFR epitope endowed the MD (DOX@MIP) particles to recognize EGFR-overexpressing cancer cells, while the pH-responsiveness and photothermal conversion ability of PDA (polydopamine) achieved chemo-photothermal synergistic effects upon NIR irradiation. Taken together, the MD nanoparticles integrated cancer cell targeting recognition, intelligent drug release, biocompatibility and chemo-photothermal effects, and is therefore a promising tool for targeted cancer therapy with minimal toxicity to normal cells, as well as tumor imaging.

Methods to Determine Chain-Breaking Antioxidant Activity of Nanomaterials beyond DPPH•. A Review

This review highlights the progress made in recent years in understanding the mechanism of action of nanomaterials with antioxidant activity and in the chemical methods used to evaluate their activity. Nanomaterials represent one of the most recent frontiers in the research for improved antioxidants, but further development is hampered by a poor characterization of the ''antioxidant activity'' property and by using oversimplified chemical methods. Inhibited autoxidation experiments provide valuable information about the interaction with the most important radicals involved in the lipid oxidation, namely alkylperoxyl and hydroperoxyl radicals, and demonstrate unambiguously the ability to stop the oxidation of organic materials. It is proposed that autoxidation methods should always complement (and possibly replace) the use of assays based on the quenching of stable radicals (such as DPPH• and ABTS•+). The mechanisms leading to the inhibition of the autoxidation (sacrificial and catalytic radical trapping antioxidant activity) are described in the context of nanoantioxidants. Guidelines for the selection of the appropriate testing conditions and of meaningful kinetic analysis are also given.

Stretchable and Bioadhesive Gelatin Methacryloyl-Based Hydrogels Enabled by in Situ Dopamine Polymerization

Hydrogel patches with high toughness, stretchability, and adhesive properties are critical to healthcare applications including wound dressings and wearable devices. Gelatin methacryloyl (GelMA) provides a highly biocompatible and accessible hydrogel platform. However, low tissue adhesion and poor mechanical properties of cross-linked GelMA patches (i.e., brittleness and low stretchability) have been major obstacles to their application for sealing and repair of wounds. Here, we show that adding dopamine (DA) moieties in larger quantities than those of conjugated counterparts to the GelMA prepolymer solution followed by alkaline DA oxidation could result in robust mechanical and adhesive properties in GelMA-based hydrogels. In this way, cross-linked patches with ∼140% stretchability and ∼19 000 J/m³ toughness, which correspond to ∼5.7 and ∼3.3× improvement, respectively, compared to that of GelMA controls, were obtained. The DA oxidization in the prepolymer solution was found to play an important role in activating adhesive properties of cross-linked GelMA patches (∼4.0 and ∼6.9× increase in adhesion force under tensile and shear modes, respectively) due to the presence of reactive oxidized quinone species. We further conducted a parametric study on the factors such as UV light parameters, the photoinitiator type (i.e., lithium phenyl-2,4,6-trimethylbenzoylphosphinate, LAP, versus 2-hydroxy-4'-(2-hydroxyethoxy)-2-methylpropiophenone, Irgacure 2959), and alkaline DA oxidation to tune the cross-linking density and thereby hydrogel compliance for better adhesive properties. The superior adhesion performance of the resulting hydrogel along with in vitro cytocompatibility demonstrated its potential for use in skin-attachable substrates.

Comparative Toxicity, Biodistribution and Excretion of Ultra-Small Gold Nanoclusters with Different Emission Wavelengths

The exponentially increased use of gold nanoclusters in diagnosis and treatment has raised serious concern about their potential threat to living organisms. However, the mechanisms of toxicity of gold nanoclusters in vitro and in vivo remain poorly understood. In this work, comparative toxicity studies, including biodistribution and excretion, were carried out with mildly and chemically synthesized ultra-small L-histidine-protected and bovine serum albumin (BSA)-protected gold nanoclusters in an all-aqueous process. These nanoclusters did not induce a remarkable impact on cell viability, even at relatively high concentrations (100 μg/mL). The haemolytic assay demonstrated that the gold nanoclusters could not destroy blood cell at 600 μg/mL. After intravenous injection with mice, the biocompatibility, biodistribution, and excretion were determined. Quantitative analysis results showed that accumulation varied in the liver, spleen, kidney, and lung, though primarily in the liver and spleen. They were excreted in urine and faeces, but mainly excreted through urine. In our study, no obvious abnormalities were found in body weight, behavioral changes, blood and serum biochemical indicators, and histopathology. These findings suggested that both gold nanoclusters showed similar effects in vivo and were safe and biocompatible, laying the foundation for safe biomedical application in the future.

Nonspecific Binding-Fundamental Concepts and Consequences for Biosensing Applications

Nature achieves differentiation of specific and nonspecific binding in molecular interactions through precise control of biomolecules in space and time. Artificial systems such as biosensors that rely on distinguishing specific molecular binding events in a sea of nonspecific interactions have struggled to overcome this issue. Despite the numerous technological advancements in biosensor technologies, nonspecific binding has remained a critical bottleneck due to the lack of a fundamental understanding of the phenomenon. To date, the identity, cause, and influence of nonspecific binding remain topics of debate within the scientific community. In this review, we discuss the evolution of the concept of nonspecific binding over the past five decades based upon the thermodynamic, intermolecular, and structural perspectives to provide classification frameworks for biomolecular interactions. Further, we introduce various theoretical models that predict the expected behavior of biosensors in physiologically relevant environments to calculate the theoretical detection limit and to optimize sensor performance. We conclude by discussing existing practical approaches to tackle the nonspecific binding challenge in vitro for biosensing platforms and how we can both address and harness nonspecific interactions for in vivo systems.

Size-controlled synthesis of bioinspired polyserotonin nanoparticles with free radical scavenging activity

Polyserotonin-based nanoparticles are a new class of bioinspired nanomaterial with recently demonstrated therapeutic potential for future clinical applications. It is therefore important to establish a robust and rapid method of synthesizing polyserotonin nanoparticles (PSeNP) in the size range ideal for in vivo utilization. Since the formation of PSeNP is base-catalyzed, here we report the influence of solution pH, in the presence of different base systems, on the kinetics of PSeNP formation and physico-chemical properties of the resulting nanoparticles. We show that the rate of formation and the size of PSeNP depend on both the nature of the base and the initial pH of the reaction. We have also improved the kinetics of particle formation by performing the synthesis at an elevated temperature (60 °C), leading to a dramatic reduction in synthesis time from days to hours. This presents a significant advance in the efficiency of PSeNP synthesis and provides a facile approach in tuning the size of nanoparticles to suit various applications. Furthermore, we show that similar to serotonin, PSeNP also exhibits free radical scavenging property. Our results demonstrate that PSeNP has the potential to become a key player in the advancement of nanotechnology-mediated antioxidative therapy.

Biofluidic material-based carriers: Potential systems for crossing cellular barriers

Biofluids act as a repository for disease biomarkers and are excellent diagnostic tools applied in establishing a disease profile based on clinical testing, evaluation and monitoring the progression of patients suffering from various conditions. Furthermore, biofluids and their derived components such proteins, pigments, enzymes, hormones and cells carry a potential in the development of therapeutic drug delivery systems or as cargo materials for targeting the drug to the site of action. The presence of biofluids with respect to their specific location reveals the information of disease progression and mechanism, delivery aspects such as routes of administration as well as pharmacological factors such as binding affinity, rate of kinetics, efficacy, bioavailability and patient compliance. This review focuses on the properties and functional benefits of some biofluids, namely blood, saliva, bile, urine, amniotic fluid, synovial fluid and cerebrospinal fluid. It also covers the therapeutic and targeting action of fluid-derived substances in various micro- or nano-systems like nanohybrids, nanoparticles, self-assembled micelles, microparticles, cell-based systems, etc. The formulation of such biologically-oriented systems demonstrate the advantages of natural origin, biocompatibility and biodegradability and offer new techniques for overcoming the challenges experienced in conventional therapies.

Conjugated polymers – a versatile platform for various photophysical, electrochemical and biomedical applications: a comprehensive review

Tuneable properties of conjugated polymers are attractive for use in multiple domains like optical, electronic and biological applications.

Ultrastable AgBiS2 Hollow Nanospheres with Cancer Cell-Specific Cytotoxicity for Multimodal Tumor Therapy

Specific cytotoxicity for catalytic nanomedicine triggered by the tumor microenvironment (TME) has attracted increasing interest. In this work, we prepared AgBiS₂ hollow nanospheres with narrow bandgaps via rapid precipitation in a weakly polar solvent, which lowered the intrinsic energy gap for the active production of highly reactive hydroxyl radicals (^•OH), especially in the TME. The as-prepared AgBiS₂ hollow nanospheres exhibited enhanced optical absorption and high photothermal conversion efficiency (44.2%). In addition, the hollow structured AgBiS₂ nanospheres were found to have a peroxidase-mimicking feature to induce cancer cell-specific cytotoxicity while exhibiting negligible cytotoxicity toward normal cells, which might be attributed to the efficient production of highly reactive ^•OH originating from the overexpression H₂O₂ in the TME caused by surface catalysis. In particular, the cancer cell-specific cytotoxicity of the nanospheres was greatly enhanced both in vitro and in vivo upon irradiation with a near-infrared (NIR) laser (808 nm). The above-mentioned features of the hollow structured AgBiS₂ will make it a promising candidate for tumor therapy.

Drug-Directed Morphology Changes in Polymerization-Induced Self-Assembly (PISA) Influence the Biological Behavior of Nanoparticles

The effect of the hydrophobic block length on the morphologies of polymerization-induced self-assembled (PISA) nanoparticles is well understood. However, the influence of drug loading on the phase morphology of the nanoparticles during the PISA process, and the resulting biological function of PISA nanoparticles, has barely been investigated. In this work, we show that the addition of a drug, curcumin, during the PISA process shifts the phase diagram toward different morphologies. The PISA system was based on hydrophilic poly(2-(methacryloyloxy)ethylphosphorylcholine) (PMPC), which was chain extended with hydrophobic methyl methacrylate (MMA) in various concentrations of curcumin. According to transmission electron microscopy, the presence of curcumin led to the transition of, for example, worms to polymersome and micelles to worms analysis. To understand the interaction between polymer particles and drug, small-angle X-ray scattering (SAXS), small-angle neutron scattering (SANS), and fluorescence lifetime measurements were carried out. These measurements show that curcumin is predominantly located in the core in the case of micelles and worms while it is found in the shell of polymersomes. The change in morphology influences the cellular uptake by MCF-7 cells and the movement of the particles in multicellular cancer spheroids (3D model). With the increasing amount of drug, the cellular uptake of micelles and worms was enhanced with the increasing grafting density of MPC chains, which contrasts the decreasing cellular uptake in the higher drug-loaded polymersomes due to the lower shell hydration.

High-throughput evolution of near-infrared serotonin nanosensors

Imaging neuromodulation with synthetic probes is an emerging technology for studying neurotransmission. However, most synthetic probes are developed through conjugation of fluorescent signal transducers to preexisting recognition moieties such as antibodies or receptors. We introduce a generic platform to evolve synthetic molecular recognition on the surface of near-infrared fluorescent single-wall carbon nanotube (SWCNT) signal transducers. We demonstrate evolution of molecular recognition toward neuromodulator serotonin generated from large libraries of ~6.9 × 1010 unique ssDNA sequences conjugated to SWCNTs. This probe is reversible and produces a ~200% fluorescence enhancement upon exposure to serotonin with a K d = 6.3 μM, and shows selective responsivity over serotonin analogs, metabolites, and receptor-targeting drugs. Furthermore, this probe remains responsive and reversible upon repeat exposure to exogenous serotonin in the extracellular space of acute brain slices. Our results suggest that evolution of nanosensors could be generically implemented to develop other neuromodulator probes with synthetic molecular recognition.

Hierarchically Patterned Polydopamine-Containing Membranes for Periodontal Tissue Engineering

Periodontitis is a common chronic inflammatory disease that affects tooth-supporting tissues. We engineer a multifunctional periodontal membrane for the guided tissue regeneration of lost periodontal tissues. The major drawback of current periodontal membranes is the lack of tissue regeneration properties. Here, a series of nanofibrous membranes based on poly(ε-caprolactone) with tunable biochemical and biophysical properties were developed for periodontal tissue regeneration. The engineered membranes were surface coated using biomimetic polydopamine to promote the adhesion of therapeutic proteins and cells. We demonstrate successful cellular localization on the surface of the engineered membrane by morphological patterning. Polydopamine accelerates osteogenic differentiation of dental-derived stem cells by promoting hydroxyapatite mineralization. Such multiscale designs can mimic the complex extracellular environment of periodontal tissue and serve as functional tissue constructs for periodontal regeneration. In a periodontal defect model in rats, our engineered periodontal membrane successfully promoted the regeneration of periodontal tissue and bone repair. Altogether, our data demonstrate that our biomimetic membranes have potential as protein/cell delivery platforms for periodontal tissue engineering.