Assembly of Hollow Carbon Nanospheres on Graphene Nanosheets and Creation of Iron-Nitrogen-Doped Porous Carbon for Oxygen Reduction

Mesoporous Single Atom-Cluster Fe-N/C Oxygen Evolution Electrocatalysts Synthesized with Bottlebrush Block Copolymer-Templated Rapid Thermal Annealing

Current electrocatalysts for oxygen evolution reaction (OER) are either expensive (such as IrO2, RuO2) or/and exhibit high overpotential as well as sluggish kinetics. This article reports mesoporous earth-abundant iron (Fe)-nitrogen (N) doped carbon electrocatalysts with iron clusters and closely surrounding Fe-N4 active sites. Unique to this work is that the mechanically stable mesoporous carbon-matrix structure (79 nm in pore size) with well-dispersed nitrogen-coordinated Fe single atom-cluster is synthesized via rapid thermal annealing (RTA) within only minutes using a self-assembled bottlebrush block copolymer (BBCP) melamine-formaldehyde resin composite template. The resulting porous structure and domain size can be tuned with the degree of polymerization of the BBCP backbone, which increases the electrochemically active surface area and improves electron transfer and mass transport for an effective OER process. The optimized electrocatalyst shows a required potential of 1.48 V (versus RHE) to obtain the current density of 10 mA/cm2 in 1 M KOH aqueous electrolyte and a small Tafel slope of 55 mV/decade at a given overpotential of 250 mV, which is significantly lower than recently reported earth-abundant electrocatalysts. Importantly, the Fe single-atom nitrogen coordination environment facilitates the surface reconstruction into a highly active oxyhydroxide under OER conditions, as revealed by X-ray photoelectron spectroscopy and in situ Raman spectroscopy, while the atomic clusters boost the single atoms reactive sites to prevent demetalation during the OER process. Density functional theory (DFT) calculations support that the iron nitrogen environment and reconstructed oxyhydroxides are electrocatalytically active sites as the kinetics barrier is largely reduced. This work has opened a new avenue for simple, rapid synthesis of inexpensive, earth-abundant, tailorable, mechanically stable, mesoporous carbon-coordinated single-atom electrocatalysts that can be used for renewable energy production.

Fe nanoparticles confined by multiple-heteroatom-doped carbon frameworks for aqueous Zn-air battery driving CO2 electrolysis

Metal-organic frameworks (MOF) derived carbon materials are considered to be excellent conductive mass transfer substrates, and the large specific surface area provides a favorable platform for loading metal nanoparticles. Tuning the coordination of metals through polyacid doping to change the MOF structure and specific surface area is an advanced strategy for designing catalysts. Modification of Fe-doped ZIF-8 pre-curing by pyrolysis of phosphomolybdic acid hydrate (PMo), Fe nanoparticles confined by Mo and N co-doped carbon frameworks (Fe-NP/MNCF) were fabricated, and the impact of PMo doping on the shape and functionality of the catalysts was investigated. The Zn-air battery (ZAB) driven CO2 electrolysis was realized by using Fe-NP/MNCF, which was used as bifunctional oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO2RR) catalysts. The results show that the half-wave potential (E1/2) of Fe-NP/MNCF is 0.89 V, and the limiting diffused current density (jL) is 6.4 mA cm-2. The ZAB constructed by Fe-NP/MNCF shows a high specific capacity of 794.8 mAh gZn-1, a high open-circuit voltage (OCV) of 1.475 V, and a high power density of 111.6 mW cm-2. Fe-NP/MNCF exhibited efficient CO2RR performance with high CO Faraday efficiency (FECO) of 87.5 % and current density for the generation of carbon dioxide (jCO) of 10 mA cm-2 at -0.9 V vs RHE. ZAB-driven CO2RR had strong catalytic stability. These findings provide new methods and techniques for the preparation of advanced carbon-based catalysts from MOFs.

Hierarchically Superstructured Anisotropic Carbon Particles by Multiscale Assembly Driven by Spinodal Decomposition

Hierarchical superstructures have novel shape-dependent properties, but well-defined anisotropic carbon superstructures with controllable size, shape, and building block dimensionality have rarely been accomplished thus far. Here, a hierarchical assembly technique is presented that uses spinodal decomposition (SD) to synthesize anisotropic oblate particles of mesoporous carbon superstructure (o-MCS) with nanorod arrays by integrating block-copolymer (BCP) self-assembly and polymer-polymer interface behaviors in binary blends. The interaction of major and minor phases in binary polymer blends leads to the formation of an anisotropic oblate particle, and the BCP-rich phase enables ordered packing and unidirectional alignment of carbon nanorods. Consequently, this approach enables precise control over particles' size, shape, and over the dimensionality of their components. Exploiting this functional superstructure, o-MCS are used as an anode material in potassium-ion batteries, and achieve a notable specific capacity of 156 mA h g-1 at a current density of 2 A g-1 , and long-term stability for 3000 cycles. This work presents a significant advancement in the field of hierarchical superstructures, providing a promising strategy for the design and synthesis of anisotropic carbon materials with controlled properties, offering promising applications in energy storage and beyond.

Molecular Design of Porous Organic Polymer-Derived Carbonaceous Electrocatalysts for Pinpointing Active Sites in Oxygen Reduction Reaction

The widespread application of fuel cells is hampered by the sluggish kinetics of the oxygen reduction reaction (ORR), which traditionally necessitates the use of high-cost platinum group metal catalysts. The indispensability of these metal catalysts stems from their ability to overcome kinetic barriers, but their high cost and scarcity necessitate alternative strategies. In this context, porous organic polymers (POPs), which are built up from the molecular level, are emerging as promising precursors to produce carbonaceous catalysts owning to their cost-effectiveness, high electrical conductivity, abundant active sites and extensive surface area accessibility. To enhance the intrinsic ORR activity and optimize the performance of these electrocatalysts, recognizing, designing, and increasing the density of active sites are identified as three crucial steps. These steps, which form the core of our review, serve to elucidate the link between the material structure design and ORR performance evaluation, thereby providing valuable insights for ongoing research in the field. Leveraging the precision of polymer skeletons based on molecular units, POP-derived carbonaceous catalysts provide an excellent platform for in-depth exploration of the role and working mechanism for the specific active site during the ORR process. In this review, the recent advances pertaining to the synthesis techniques and electrochemical functions of various types of active sites, pinpointed from POPs, are systematically summarized, including heteroatoms, surficial substituents and edge/defects. Notably, the structure-property relationship, between these active sites and ORR performance, are discussed and emphasized, which creates guidelines to shed light on the design of high-performance ORR electrocatalysts.

Recent Progress of Hollow Carbon Nanocages: General Design Fundamentals and Diversified Electrochemical Applications

Hollow carbon nanocages (HCNCs) consisting of sp2  carbon shells featured by a hollow interior cavity with defective microchannels (or customized mesopores) across the carbon shells, high specific surface area, and tunable electronic structure, are quilt different from the other nanocarbons such as carbon nanotubes and graphene. These structural and morphological characteristics make HCNCs a new platform for advanced electrochemical energy storage and conversion. This review focuses on the controllable preparation, structural regulation, and modification of HCNCs, as well as their electrochemical functions and applications as energy storage materials and electrocatalytic conversion materials. The metal single atoms-functionalized structures and electrochemical properties of HCNCs are summarized systematically and deeply. The research challenges and trends are also envisaged for deepening and extending the study and application of this hollow carbon material. The development of multifunctional carbon-based composite nanocages provides a new idea and method for improving the energy density, power density, and volume performance of electrochemical energy storage and conversion devices.

Biocatalysts in Synthesis of Microbial Polysaccharides: Properties and Development Trends

Polysaccharides synthesized by microorganisms (bacterial cellulose, dextran, pullulan, xanthan, etc.) have a set of valuable properties, such as being antioxidants, detoxifying, structuring, being biodegradable, etc., which makes them suitable for a variety of applications. Biocatalysts are the key substances used in producing such polysaccharides; therefore, modern research is focused on the composition and properties of biocatalysts. Biocatalysts determine the possible range of renewable raw materials which can be used as substrates for such synthesis, as well as the biochemistry of the process and the rate of molecular transformations. New biocatalysts are being developed for participating in a widening range of stages of raw material processing. The functioning of biocatalysts can be optimized using the following main approaches of synthetic biology: the use of recombinant biocatalysts, the creation of artificial consortia, the combination of nano- and microbiocatalysts, and their immobilization. New biocatalysts can help expand the variety of the polysaccharides’ useful properties. This review presents recent results and achievements in this field of biocatalysis.

Coordinated single-molecule micelles: a self-template approach for preparing mesoporous doped carbons

Porous carbons prepared using a self-template approach inherit the pore features of template, but they exhibit almost no evenly dispersed mesopores, which is significant for diffusion-limited applications. Herein, N-doped hierarchically porous carbons (NHPCs) with uniform mesopores are prepared using a self-template method. The spherical single-molecule micelle of polystyrene-b-poly(4-vinyl pyridine) (PS-b-P4VP) is turned into a Zn²⁺-coordinated PS-b-P4VP micelle (CPM) by coordination of Zn²⁺ with the P4VP shell. Then, the self-template of the CPM is carbonized into a hollow carbon nanosphere. During carbonization, the PS core is decomposed to generate the central mesopore, whereas the Zn²⁺-coordinated P4VP shell is transformed into a carbonaceous shell. These even hollow carbon nanospheres aggregate to form uniformly mesoporous carbon lumps. Simultaneously, the coordinated Zn²⁺ of the CPM is reduced to metal zinc at high temperatures and then it is evaporated, thus creating numerous micropores in the carbonaceous shell. These NHPCs with uniform mesopores display a high specific surface area. As a demonstration in diffusion-limited applications, their catalytic performances for the oxygen reduction reaction (ORR) are investigated. Strikingly, NHPCs exhibit outstanding catalytic performances for the ORR. This self-template method paves a facile approach for preparing mesoporous carbons with high performances.

Shape-Controlled Photochemical Synthesis of Noble Metal Nanocrystals Based on Reduced Graphene Oxide

The fabrication of supported noble metal nanocrystals (NCs) with well-controlled morphologies have been attracted considerable interests due to their merits in a wide variety of applications. Photodeposition is a facile and effective method to load metals over semiconductors in a simple slurry reactor under irradiation. By optimizing the photodeposition process, the size, chemical states, and the geometrical distribution of metal NCs have been successfully tuned. However, metal NCs with well-controlled shapes through the photodeposition process have not been reported until now. Here, we report our important advances in the controlled photodeposition process to load regular noble metal NCs. Reduced graphene oxide (rGO) is introduced as a reservoir for the fast transfer of photoelectrons to avoid the fast accumulation of photogenerated electrons on the noble metals which makes the growth process uncontrollable. Meanwhile, rGO also provides stable surface for the controlled nucleation and oriented growth. Noble metal NCs with regular morphologies are then evenly deposited on rGO. This strategy has been demonstrated feasible for different precious metals (Pd, Au, and Pt) and semiconductors (TiO₂, ZnO, ZrO₂, CeO₂, and g-C₃N₄). In the prototype application of electrochemical hydrogen evolution reaction, regular Pd NCs with enclosed {111} facets showed much better performance compared with that of irregular Pd NCs.

Recent Progress on Revealing 3D Structure of Electrocatalysts Using Advanced 3D Electron Tomography: A Mini Review

Electrocatalysis plays a key role in clean energy innovation. In order to design more efficient, durable and selective electrocatalysts, a thorough understanding of the unique link between 3D structures and properties is essential yet challenging. Advanced 3D electron tomography offers an effective approach to reveal 3D structures by transmission electron microscopy. This mini-review summarizes recent progress on revealing 3D structures of electrocatalysts using 3D electron tomography. 3D electron tomography at nanoscale and atomic scale are discussed, respectively, where morphology, composition, porous structure, surface crystallography and atomic distribution can be revealed and correlated to the performance of electrocatalysts. (Quasi) in-situ 3D electron tomography is further discussed with particular focus on its impact on electrocatalysts’ durability investigation and post-treatment. Finally, perspectives on future developments of 3D electron tomography for eletrocatalysis is discussed.

Tuning Active Species in N-Doped Carbon with Fe/Fe3C Nanoparticles for Efficient Oxygen Reduction Reaction

Transition metal-nitrogen-carbon (M-N-C) catalysts (M = Fe, Co, etc.) are the most promising substituents of Pt-based catalysts for oxygen reduction reaction (ORR). However, the insufficient active species in catalysts inevitably hamper their widespread applications. Herein, we report the regulation of the active species in the catalysts of multicomponent N-doped carbon with Fe/Fe₃C nanoparticles by polydopamine (PDA) coating. It is found that the PDA is conducive to increasing the pyridinic, graphitic, and total N content in the carbon matrix. Benefiting from the chelating effects, the PDA further profits the formation of Fe-Nx structures and the implantation of Fe/Fe₃C nanoparticles in the matrix during the pyrolysis. As expected, the resultant catalysts exhibit over 15 times mass activity toward ORR than nitrogen-doped carbon. Moreover, our developed catalysts show long-term stability as well as high methanol tolerance, which is superior to that of the commercial Pt/C electrode. This work provides a new avenue to explore a wider range of high-performance ORR electrocatalysts by regulating the active species.

Synergy between iron oxide sites and nitrogen-doped carbon xerogel/diamond matrix for boosting the oxygen reduction reaction

The innovative design and facile synthesis of efficient and stable electrocatalysts for the oxygen reduction reaction (ORR) are crucial in the field of fuel cells. Herein, the facile synthesis of an iron oxide@nitrogen-doped carbon diamond (FeO x @NCD) composite via an effective pyrolysis strategy is reported. The properties of this electrocatalyst, including a high density of active sites, nitrogen doping, accessible surface area, well dispersed pyramidal morphology of the iron oxide, and the porous structure of the carbon matrix, promote a highly active oxygen reduction reaction (ORR) performance. The electrocatalyst exhibits outstanding stability, with a half-wave potential of 0.692 V in alkaline solution (0.1 M KOH), as well as a limiting current density of -31.5 mA cm-2 at 0.17 V vs. RHE. This study highlights the benefits of hybridizing sp2 carbon xerogel and sp3 diamond carbon allotropes with iron oxide to boost the ORR activity. The proposed strategy opens up an avenue for designing advanced carbon-supported metal oxide catalysts that exhibit excellent electrocatalytic performance.

Single-Atom (Iron-Based) Catalysts: Synthesis and Applications

Supported single-metal atom catalysts (SACs) are constituted of isolated active metal centers, which are heterogenized on inert supports such as graphene, porous carbon, and metal oxides. Their thermal stability, electronic properties, and catalytic activities can be controlled via interactions between the single-metal atom center and neighboring heteroatoms such as nitrogen, oxygen, and sulfur. Due to the atomic dispersion of the active catalytic centers, the amount of metal required for catalysis can be decreased, thus offering new possibilities to control the selectivity of a given transformation as well as to improve catalyst turnover frequencies and turnover numbers. This review aims to comprehensively summarize the synthesis of Fe-SACs with a focus on anchoring single atoms (SA) on carbon/graphene supports. The characterization of these advanced materials using various spectroscopic techniques and their applications in diverse research areas are described. When applicable, mechanistic investigations conducted to understand the specific behavior of Fe-SACs-based catalysts are highlighted, including the use of theoretical models.

A Solvent-Polarity-Induced Interface Self-Assembly Strategy towards Mesoporous Triazine-Based Carbon Materials

Triazine-based materials with porous structure have recently received numerous attentions as a fascinating new class because of their superior potential for various applications. However, it is still a formidable challenge to obtain triazine-based materials with precise adjustable meso-scaled pore sizes and controllable pore structures by reported synthesis approaches. Herein, we develop a solvent polarity induced interface self-assembly strategy to construct mesoporous triazine-based carbon materials. In this method, we employ a mixed solvent system within a suitable range of polarity (0.223≤Lippert-Mataga parameter (Δf) ≤0.295) to induce valid self-assembly of skeleton precursor and surfactant. The as-prepared mesoporous triazine-based carbon materials possess uniform tunable pore sizes (8.2-14.0 nm), high surface areas and ultrahigh nitrogen content (up to 18 %). Owing to these intriguing advantages, the fabricated mesoporous triazine-based carbon materials as functionalized porous solid absorbents exhibit predominant CO₂ adsorption performance and exceptional selectivity for the capture of CO₂ over N₂ .

Nanoarchitecturing Carbon Nanodot Arrays on Zeolitic Imidazolate Framework-Derived Cobalt-Nitrogen-Doped Carbon Nanoflakes toward Oxygen Reduction Electrocatalysts

Two-dimensional (2D) nanoporous heterostructured composites formed by uniformly coating individual monolayers with porous layers introduce unparalleled opportunities to improve and optimize the electrochemical performances of 2D materials. Here, an all-porous carbon heterostructure composed of 2D microporous carbon nanoflakes uniformly decorated with carbon nanodots has been developed. Interestingly, resol-F127 micelles self-assemble on the surface of zeolitic imidazolate framework (ZIF) nanoflakes in the form of a nanodot array, yielding a heterostructure. Hydrothermal treatment followed by carbonization under a nitrogen atmosphere causes conversion of the nanodot-nanoflake assembly into a carbon-based material composed of hollow carbon nanodots (CNDs) and microporous carbon nanoflakes (CNFs), that is, a CND@CNF composite. The combination of 2D microporous carbon nanoflakes with carbon hollow nanodots enhances exposure of the active sites and improves mass transfer in all directions (including through the nanoflakes). The use of cobalt (Co)-containing ZIF leads to the synthesis of a Co-N_x-doped CND@CNF composite, which exhibits oxygen reduction reaction electrocatalytic activity and long-term stability superior even to commercial Pt/C catalysts. This architecture-engineering strategy has been used to design and synthesize 2D heterostructures possessing high electrocatalytic efficiency and will be useful for future developments in important electrochemical energy storage and conversion applications.

Incorporating Cobalt Nanoparticles in Nitrogen-Doped Mesoporous Carbon Spheres through Composite Micelle Assembly for High-Performance Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries have exhibited tremendous potential among the various secondary batteries benefitting from their large energy density, low expense, and enhanced security. However, the commercial use for Li-S batteries is immensely limited by the insulation of S, noticeable volume expansion from S to Li₂S₂/Li₂S, and the undesired shuttle effect of lithium polysulfides (LiPs). Herein, a composite sulfur host has been prepared by in situ incorporations of cobalt nanoparticles (NPs) into nitrogen-doped mesoporous carbon spheres (Co/N-PCSs) through the composite micelle assembly strategy. The resultant functional Co/N-PCSs not only possess uniform spherical morphology with large open mesopores, high surface area, and pore volume but also have small Co NPs homogeneously inlaid into the pore walls of carbon frameworks. Both the experimental and theoretical calculation results demonstrate that the formed cobalt NPs can efficiently accelerate the lithium-ion diffusion reaction and greatly entrap the soluble intermediate LiPs. Benefiting from the well-designed structure, the Co/N-PCSs@S cathode with a S loading of 73.82 wt % delivers superior electrochemical performance, including long cycling stability (60% for the residual capacity at 1 A g^-1 within 300 cycles) and excellent rate performance (∼512 mAh g^-1 at 6 A g^-1). This design strategy of implanting metal NPs in mesoporous carbon can be inspiring in energy storage applications.

Molten-salt-assisted synthesis of onion-like Co/CoO@FeNC materials with boosting reversible oxygen electrocatalysis for rechargeable Zn-air battery

A melt-salt-assisted method is utilized to construct an onion-like hybrid with Co/CoO nanoparticles embedded in graphitic Fe-N-doped carbon shells (Co/CoO@FeNC) as a bifunctional electrocatalyst. The iron-polypyrrole (Fe-PPy) is firstly prepared with a reverse emulsion. Direct pyrolysis of Fe-PPy yields turbostratic Fe-N-doped carbon (FeNC) with excellent oxygen reduction reaction (ORR) electrocatalysis, while the melt salt (CoCl₂) mediated pyrolysis of Fe-PPy obtains onion-like Co/CoO@FeNC with a reversible overvoltage value of 0.695 V, largely superior to Pt/C and IrO₂ (0.771 V) and other Co-based catalysts reported so far. The ORR activity is mainly due to the graphitic FeNC and further enhanced by CoN_x bonds, whereas the oxygen evolution reaction (OER) activity is principally due to the Co/CoO composite. Concurrently, Co/CoO@FeNC as cathode catalyst enables Zn-air battery with a high open circuit voltage of 1.42 V, a peak power density of 132.8 mW cm^-2, a specific capacity of 813 mAh g_Zn^-1, and long-term stability.

Metal-Organic-Framework-Derived Nanostructures as Multifaceted Electrodes in Metal-Sulfur Batteries

Metal-sulfur batteries (MSBs) are considered up-and-coming future-generation energy storage systems because of their prominent theoretical energy density. However, the practical applications of MSBs are still hampered by several critical challenges, i.e., the shuttle effects, sluggish redox kinetics, and low conductivity of sulfur species. Recently, benefiting from the high surface area, regulated networks, molecular/atomic-level reactive sites, the metal-organic frameworks (MOFs)-derived nanostructures have emerged as efficient and durable multifaceted electrodes in MSBs. Herein, a timely review is presented on recent advancements in designing MOF-derived electrodes, including fabricating strategies, composition management, topography control, and electrochemical performance assessment. Particularly, the inherent charge transfer, intrinsic polysulfide immobilization, and catalytic conversion on designing and engineering of MOF nanostructures for efficient MSBs are systematically discussed. In the end, the essence of how MOFs' nanostructures influence their electrochemical properties in MSBs and conclude the future tendencies regarding the construction of MOF-derived electrodes in MSBs is exposed. It is believed that this progress review will provide significant experimental/theoretical guidance in designing and understanding the MOF-derived nanostructures as multifaceted electrodes, thus offering promising orientations for the future development of fast-kinetic and robust MSBs in broad energy fields.

Graphene-carbon 2D heterostructures with hierarchically-porous P,N-doped layered architecture for capacitive deionization

Exploring a new-family of carbon-based desalinators to optimize their performances beyond the current commercial benchmark is of significance for the development of practically useful capacitive deionization (CDI) materials. Here, we have fabricated a hierarchically porous N,P-doped carbon–graphene 2D heterostructure (denoted NPC/rGO) by using metal–organic framework (MOF)-nanoparticle-driven assembly on graphene oxide (GO) nanosheets followed by stepwise pyrolysis and phosphorization procedures. The resulting NPC/rGO-based CDI desalinator exhibits ultrahigh deionization performance with a salt adsorption capacity of 39.34 mg g⁻¹ in a 1000 mg L⁻¹ NaCl solution at 1.2 V over 30 min with good cycling stability over 50 cycles. The excellent performance is attributed to the high specific surface area, high conductivity, favorable meso-/microporous structure together with nitrogen and phosphorus heteroatom co-doping, all of which are beneficial for the accommodation of ions and charge transport during the CDI process. More importantly, NPC/rGO exhibits a state-of-the-art CDI performance compared to the commercial benchmark and most of the previously reported carbon materials, highlighting the significance of the MOF nanoparticle-driven assembly strategy and graphene–carbon 2D heterostructures for CDI applications.

MOF nanoparticle-driven assembly on 2D nanosheets produces the graphene–carbon heterostructure with hierarchically-porous P,N-doped layered architecture.

Biosugarcane-based carbon support for high-performance iron-based Fischer-Tropsch synthesis

Exploiting new carbon supports with adjustable metal-support interaction and low price is of prime importance to realize the maximum active iron efficiency and industrial-scale application of Fe-based catalysts for Fischer-Tropsch synthesis (FTS). Herein, a simple, tunable, and scalable biochar support derived from the sugarcane bagasse was successfully prepared and was first used for FTS. The metal-support interaction was precisely controlled by functional groups of biosugarcane-based carbon material and different iron species sizes. All catalysts synthesized displayed high activities, and the iron-time-yield of Fe₄/C_bio even reached 1,198.9 μmol g_Fe⁻¹ s⁻¹. This performance was due to the unique structure and characteristics of the biosugarcane-based carbon support, which possessed abundant C−O, C=O (η¹(O) and η²(C, O)) functional groups, thus endowing the moderate metal-support interaction, high dispersion of active iron species, more active ε-Fe₂C phase, and, most importantly, a high proportion of Fe_xC/Fe_surf, facilitating the maximum iron efficiency and intrinsic activity of the catalyst.

•

A kind of carbon support, derived from the sugarcane bagasse, is prepared

•

This biochar catalyst reaches an excellent FTY value in Fischer-Tropsch synthesis

•

Functional groups and Fe species sizes regulate metal-support interactions

•

Superior performance is due to abundant functional groups and ε-Fe₂C

Fe/Fe3C Embedded in N-Doped Worm-like Porous Carbon for High-Rate Catalysis in Rechargeable Zinc-Air Batteries

Designing low-cost preparation of high-activity electrocatalysts with excellent stability is the route one must take to fully realize large-scale application implementation of zinc-air batteries. 3D nitrogen-doped nanocarbons with transition metals or their derivatives encapsulated in show promising potential in the field of non-precious metal oxygen electrocatalysis. Herein, we report a simple, economical, and large-scale production method to construct worm-like porous nitrogen-doped carbon with in situ-grown carbon nanotubes and uniformly embedded Fe/Fe₃C nanoparticles. It not only has high conductivity owing to the nitrogen-doped nature but also has ample active sites and electrolyte diffusion channels benefitting from the uniformly distributed heterostructural Fe/Fe₃C nanoparticles and discrete hierarchically porous structures. When used as catalyst materials for a zinc-air battery, an energy density of 719.1 Wh kg^-1 and a peak power density of 101.3 mW cm^-2 at a 50 mA cm^-2 discharge current density is achieved. Additionally, throughout charging and discharging for 200 cycles at a current density of 20 mA cm^-2, the charge/discharge voltage gap is nearly constant.

All-Graphitic Multilaminate Mesoporous Membranes by Interlayer-Confined Molecular Assembly

Layered mesostructured graphene, which combines the intrinsic advantages of planar graphene and mesoporous materials, has become interestingly important for energy storage and conversion applications. Here, an interlayer-confined molecular assembly method is presented for constructing all-graphitic multilaminate membranes (MMG⊂rGO), which are composed of monolayer mesoporous graphene (MMG) sandwiched between reduced graphene oxide (rGO) sheets. Hybrid assembly of iron-oleate complexes and organically modified GO sheets enables the preferential assembly of iron-oleate precursors at the interlayer space of densely stacked GO, driven by the like-pair molecular van der Waals interactions. Confined pyrolysis of iron-oleate complexes at GO interlayers leads to close-packed, carbon-coated Fe₃ O₄ nanocrystal arrays, which serve as intermediates to template the subsequent formation of MMG⊂rGO membranes. To demonstrate their application potentials, MMG⊂rGO membranes are exploited as dual-functional interlayers to boost the performance of Li-S batteries by concurrently suppressing the shuttle of polysulfides and the growth of Li dendrites. This work showcases the capability of molecular-based hybrid assembly for synthesizing multilayer mesostructured graphene with high packing density and its use in electrochemical energy applications.

NiCo2O4 nanoparticles inlaid on sulphur and nitrogen doped and co-doped rGO sheets as efficient electrocatalysts for the oxygen evolution and methanol oxidation reactions

The present work depicts the fabrication of NiCo₂O₄ decorated on rGO, and doped and co-doped rGO and its electrocatalytic activity towards the oxygen evolution reaction and methanol oxidation reaction. The NiCo₂O₄ catalyst with S-doped rGO outperformed the other catalysts, indicating that the sulphur atoms attached on rGO possess low oxophilicity and optimum free energy. This results in facile adsorption of the intermediate products formed during the OER and a rapid release of O₂ molecules. The same catalyst requires an overpotential of 1.51 V vs. RHE to attain the benchmark current density value of 10 mA cm^-2 and shows a Tafel slope of 57 mV dec^-1. It also reveals outstanding stability during its operation for 10 h with a minimum loss in potential. On the other hand, NiCo₂O₄/S,N-rGO reveals superior activity with high efficiency and stability in catalyzing methanol oxidation. The catalyst delivered a low onset potential of 0.12 V vs. Hg/HgO and high current density of 203.4 mA cm^-2 after addition of 0.5 M methanol, revealing the outstanding performance of the electrocatalyst.

Recent advances in porous nanostructures for cancer theranostics

Porous nanomaterials with high surface area, tunable porosity, and large mesopores have recently received particular attention in cancer therapy and imaging. Introduction of additional pores to nanostructures not only endows the tunability of optoelectronic and optical features optimal for tumor treatment, but also modulates the loading capacity and controlled release of therapeutic agents. In recognition, increasing efforts have been made to fabricate various porous nanomaterials and explore their potentials in oncology applications. Thus, a systematic and comprehensive summary is necessary to overview the recent progress, especially in last ten years, on the development of various mesoporous nanomaterials for cancer treatment as theranostic agents. While outlining their individual synthetic mechanisms after a brief introduction of the structures and properties of porous nanomaterials, the current review highlighted the representative applications of three main categories of porous nanostructures (organic, inorganic, and organic-inorganic nanomaterials). In each category, the synthesis, representative examples, and interactions with tumors were further detailed. The review was concluded with deliberations on the key challenges and future outlooks of porous nanostructures in cancer theranostics.

High-Quality CoFeP Nanocrystal/N, P Dual-Doped Carbon Composite as a Novel Bifunctional Electrocatalyst for Rechargeable Zn-Air Battery

A novel composite catalyst (CoFeP@C) was constructed by high-quality CoFeP nanoparticles embedded in a N, P dual-doped carbon matrix. These CoFeP nanoparticles are rich in active sites of the oxygen evolution reaction (OER) at surfaces and provide metallic conductivity in their bulk phases. The N, P dual-doped carbon matrix provided abundant active sites of the oxygen reduction reaction (ORR) and formed a conductive network substrate. The ideal composite structure endowed CoFeP@C with highly efficient bifunctional performance for catalyzing both OER and ORR, accordingly making CoFeP@C an ideal catalyst for rechargeable Zn-air batteries. The liquid Zn-air battery of CoFeP@C has achieved a large power density of 143.5 mW/cm² and can be charged and discharged stably for 200 h (1200 cycles). The solid-state Zn-air battery of CoFeP@C has achieved a power density of 72.6 mW/cm² and can stably run for 20 h. This work has deepened the understanding of synergistic catalysis and paved one way for the development of high-performance bifunctional catalysts.

Graphene-Based Two-Dimensional Mesoporous Materials: Synthesis and Electrochemical Energy Storage Applications

Graphene (G)-based two dimensional (2D) mesoporous materials combine the advantages of G, ultrathin 2D morphology, and mesoporous structures, greatly contributing to the improvement of power and energy densities of energy storage devices. Despite considerable research progress made in the past decade, a complete overview of G-based 2D mesoporous materials has not yet been provided. In this review, we summarize the synthesis strategies for G-based 2D mesoporous materials and their applications in supercapacitors (SCs) and lithium-ion batteries (LIBs). The general aspect of synthesis procedures and underlying mechanisms are discussed in detail. The structural and compositional advantages of G-based 2D mesoporous materials as electrodes for SCs and LIBs are highlighted. We provide our perspective on the opportunities and challenges for development of G-based 2D mesoporous materials. Therefore, we believe that this review will offer fruitful guidance for fabricating G-based 2D mesoporous materials as well as the other types of 2D heterostructures for electrochemical energy storage applications.

Enhanced electrocatalytic oxygen reduction reaction for Fe-N4-C by the incorporation of Co nanoparticles

Oxygen reduction reaction (ORR) catalytic activity can be improved by means of enhancing the synergy between transition metals. In this work, a novel porous Fe-N₄-C nanostructure containing uniformly dispersed Co nanoparticles (CoNPs) is prepared by an assisted thermal loading method. The as-prepared Co@Fe-N-C catalyst shows enhanced ORR activity with a half-wave potential (E_1/2) of 0.92 V vs. RHE, which is much higher than those of the direct pyrolysis CoNP-free sample Fe-N-C (E_1/2 = 0.85 V) and Pt/C (E_1/2 = 0.90 V) in alkaline media. It exhibits remarkable stability with only a 10 mV decrease in E_1/2 after 10 000 cycles and an outstanding long-term durability with 85% current remaining after 60 000 s. In acidic media, this catalyst exhibits catalytic activity with an E_1/2 of 0.79 V, comparable to Pt/C (E_1/2 = 0.82 V). X-ray absorption fine spectroscopy analysis revealed the presence of active centres of Fe-N₄. Density functional theory calculations confirmed the strong synergy between CoNPs and Fe-N₄ sites, providing a lower overpotential and beneficial electronic structure and a local coordination environment for the ORR. The incorporation of CoNPs on the surface of Fe-N₄-C nanomaterials plays a key role in enhancing the ORR catalytic activity and stability, providing a new route to prepare efficient Pt-free ORR catalysts.

Fe3C-Assisted Single Atomic Fe Sites for Sensitive Electrochemical Biosensing

The rational construction of advanced sensing platforms to sensitively detect H₂O₂ produced by living cells is one of the challenges in both physiological and pathological fields. Owing to the extraordinary catalytic performances and similar metal coordination to natural metalloenzymes, single atomic site catalysts (SASCs) with intrinsic peroxidase (POD)-like activity have shown great promise for H₂O₂ detection. However, there still exists an obvious gap between them and natural enzymes because of the great challenge in rationally modulating the electronic and geometrical structures of central atoms. Note that the deliberate modulation of the metal-support interaction may give rise to the promising catalytic activity. In this work, an extremely sensitive electrochemical H₂O₂ biosensor based on single atomic Fe sites coupled with carbon-encapsulated Fe₃C crystals (Fe₃C@C/Fe-N-C) is proposed. Compared with the conventional Fe SASCs (Fe-N-C), Fe₃C@C/Fe-N-C exhibits superior POD-like activity and electrochemical H₂O₂ sensing performance with a high sensitivity of 1225 μA/mM·cm², fast response within 2 s, and a low detection limit of 0.26 μM. Significantly, sensitive monitoring of H₂O₂ released from living cells is also achieved. Moreover, the density functional theory calculations reveal that the incorporated Fe₃C nanocrystals donate electrons to single atomic Fe sites, endowing them with improved activation ability of H₂O₂ and further enhancing the overall activity. This work provides a new design of synergistically enhanced single atomic sites for electrochemical sensing applications.

Synergistic Modulation of Carbon-Based, Precious-Metal-Free Electrocatalysts for Oxygen Reduction Reaction

Developing alternatives to noble-metal-based catalysts toward the oxygen reduction reaction (ORR) process plays a key role in the application of low-temperature fuel cells. Carbon-based, precious-metal-free electrocatalysts are of great interest due to their low cost, abundant sources, active catalytic performance, and long-term stability. They are also supposed to feature intrinsically high activity and highly dense catalytic sites along with their sufficient exposure, high conductivity, and high chemical stability, as well as effective mass transfer pathways. In this Review, we focus on carbon-based, precious-metal-free nanocatalysts with synergistic modulation of active-site species and their exposure, mass transfer, and charge transport during the electrochemical process. With this knowledge, perspectives on synergistic modulation strategies are proposed to push forward the development of Pt-free ORR catalysts and the wide application of fuel cells.

Application of Scanning Tunneling Microscopy in Electrocatalysis and Electrochemistry

Abstract

Scanning tunneling microscopy (STM) has gained increasing attention in the field of electrocatalysis due to its ability to reveal electrocatalyst surface structures down to the atomic level in either ultra-high-vacuum (UHV) or harsh electrochemical conditions. The detailed knowledge of surface structures, surface electronic structures, surface active sites as well as the interaction between surface adsorbates and electrocatalysts is highly beneficial in the study of electrocatalytic mechanisms and for the rational design of electrocatalysts. Based on this, this review will discuss the application of STM in the characterization of electrocatalyst surfaces and the investigation of electrochemical interfaces between electrocatalyst surfaces and reactants. Based on different operating conditions, UHV-STM and STM in electrochemical environments (EC-STM) are discussed separately. This review will also present emerging techniques including high-speed EC-STM, scanning noise microscopy and tip-enhanced Raman spectroscopy.

Graphic Abstract

Synthesis of nitrogen and sulfur doped graphene on graphite foam for electro-catalytic phenol degradation and water splitting

A rational design of electrode materials with both high electron conductivity and abundant of catalytic sites is essential for high-performance electrochemical reactions. Herein, a nitrogen and sulfur co-doped graphene (SNG) anchored on the interconnected conductive graphite foam (GF) is fabricated via drop-casting and in situ annealing. The SNG flakes are tightly immobilized on the GF surface, which can provide fast electron transfer rate and large electrolyte/electrode interfaces. The SNG@GF composite can be directly used as a free-standing electrode for electro-catalytic degradation of organic pollutants and overall water splitting. SNG@GF significantly enhanced the electrochemical activation of peroxymonosulfate (PMS) for catalytic oxidation. During the oxygen evolution reaction (OER), the SNG@GF exhibits an initial overpotential of 330 mV vs. RHE at 10 mA cm^-2 with a Tafel slope of 149 mV dec^-1 in 1 M KOH, which outperforms most of the reported metal-free catalysts. The density functional theory calculations are also used to unveil the S, N dual doping effects of carbon materials and their synergy in carbocatalysis. This study dedicates to developing multi-functional carbocatalysts for environmental and energy applications, and enables insights into carbocatalysis in electrochemistry.

Atomic Arrangement Modulation in CoFe Nanoparticles Encapsulated in N-Doped Carbon Nanostructures for Efficient Oxygen Reduction Reaction

The properties and, hence, the application of materials are dependent on the way their constituent atoms are arranged. Here, we report a facile approach to produce body-centered cubic (bcc) and face-centered cubic (fcc) phases of bimetallic FeCo crystalline nanoparticles embedded into nitrogen-doped carbon nanotubes (NCNTs) with equal loading and almost similar particle size for both crystalline phases by a rational selection of precursors. The two electrocatalysts with similar composition but different crystalline structures of the encapsulated nanoparticles have allowed us, for the first time, to account for the effect of crystal structure on the overall work function of electrocatalysts and the concomitant correlation with the oxygen reduction reaction (ORR). This study unveils that the electrocatalysts with lower work function show lower activation energy to facilitate the ORR. Importantly, the difference between the ORR activation energy on electrocatalysts and their respective work functions are found to be identical (∼0.2 eV). A notable decrease in the ORR activity after acid treatment indicates the significant role of encapsulated FeCo nanoparticles in influencing the oxygen electrochemistry by modulating the material property of overall electrocatalysts.

H2 Activation with Co Nanoparticles Encapsulated in N-Doped Carbon Nanotubes for Green Synthesis of Benzimidazoles

Co nanoparticles (NPs) encapsulated in N-doped carbon nanotubes (Co@NC₉₀₀ ) are systematically investigated as a potential alternative to precious Pt-group catalysts for hydrogenative heterocyclization reactions. Co@NC₉₀₀ can efficiently catalyze hydrogenative coupling of 2-nitroaniline to benzaldehyde for synthesis of 2-phenyl-1H-benzo[d]imidazole with >99 % yield at ambient temperature in one step. The robust Co@NC₉₀₀ catalyst can be easily recovered by an external magnetic field after the reaction and readily recycled for at least six times without any evident decrease in activity. Kinetic experiments indicate that Co@NC₉₀₀ -promoted hydrogenation is the rate-determining step with a total apparent activation energy of 41±1 kJ mol^-1 . Theoretical investigations further reveal that Co@NC₉₀₀ can activate both H₂ and the nitro group of 2-nitroaniline. The observed energy barrier for H₂ dissociation is only 2.70 eV in the rate-determining step, owing to the presence of confined Co NPs in Co@NC₉₀₀ . Potential industrial application of the earth-abundant and non-noble transition metal catalysts is also explored for green and efficient synthesis of heterocyclic compounds.

Graphene-supported single-atom catalysts and applications in electrocatalysis

Supported metal nanostructures are the most extensively studied heterogeneous catalysts, benefiting from easy separation, regeneration and affordable cost. The size of the supported metal species is one of the decisive factors in determining the activity of heterogeneous catalysts. Particularly, the unsaturated coordination environment of metal atoms preferably act as the active centers, minimizing these metal species can significantly boost the specific activity of every single metal atom. Single-atom catalysts/catalysis (SACs), containing isolated metals atomically dispersed on or coordinated with the surface of a support material, represent the ultimate utilization of supported metals and maximize metal usage efficiency. Graphene, a two-dimensional star material, exhibiting extraordinary physical and chemical properties, has been approved as an excellent platform for constructing SACs. When atomically dispersed metal atoms are strongly anchored on the graphene surface, featuring ultra-high surface area and excellent electronic properties, SACs offer a great potential to significantly innovate the conventional heterogeneous catalysis, especially in the field of electrocatalysis. In this review, a detailed discussion of graphene-supported SACs, including preparation approaches, characterization techniques and applications on typical electrocatalytic reactions is provided. The advantages and unique features of graphene-supported SACs as efficient electrocatalysts and the upcoming challenges for improving their performance and further practical applications are also highlighted.

General and Efficient Synthesis of Two-Dimensional Monolayer Mesoporous Materials with Diverse Framework Compositions

Two-dimensional (2D) mesoporous materials have received substantial research interest due to their highly exposed active sites and unusual nanoconfinement effect. However, controllable and efficient synthesis of 2D mesoporous materials and investigation of their intrinsic properties have remained quite rare. Herein, a general and effective surface-limited cooperative assembly (SLCA) method enabled by leveling precursor solutions on KCl crystals via centrifugation is employed to conveniently synthesize two-dimensional (2D) monolayer mesoporous materials with different compositions. This novel strategy is performed in a manner similar to spin coating, not only enabling generation of ultrathin mesostructured composite film on KCl particles and recycling excessive precursor solution but also providing favorable solvent annealing environment for the film to form ordered mesostructures. Taking monolayer mesoporous Ce_0.8Zr_0.2O₂ solid solutions as a sample, they display ultrathin nanosheet morphology with a thickness of ∼20 nm, highly open porous structure, and easily accessible active sites of surface superoxide species. Upon decoration of 2D mesoporous Ce_0.8Zr_0.2O₂ nanosheets with Pt nanoparticles, the obtained catalyst exhibits superior catalytic activity and stability toward CO oxidation with a low onset temperature of 30 °C and a 100% conversion temperature of 95 °C, which are 35-70 °C lower than those for their counterpart materials, namely, three-dimensional (3D) mesoporous Pt/Ce_0.8Zr_0.2O₂. Moreover, their TOF_Pt value is ∼11.3 times higher than that of 3D mesoporous Pt/Ce_0.8Zr_0.2O₂. Characterizations based on various techniques indicate that such an outstanding catalytic performance is due to the ultrashort distance (20 nm) of mass diffusion, highly exposed active sites, rich surface-chemisorbed oxygen, and the synergistic effect between the Ce_0.8Zr_0.2O₂ matrix and Pt species.

Construction of Charring-Functional Polyheptanazine towards Improvements in Flame Retardants of Polyurethane

Nitrogen-containing flame retardants have been extensively applied due to their low toxicity and smoke-suppression properties; however, their poor charring ability restricts their applications. Herein, a representative nitrogen-containing flame retardant, polyheptanazine, was investigated. Two novel, cost-effective phosphorus-doped polyheptazine (PCN) and cobalt-anchored PCN (Co@PCN) flame retardants were synthesized via a thermal condensation method. The X-ray photoelectron spectroscopy (XPS) results indicated effective doping of P into triazine. Then, flame-retardant particles were introduced into thermoplastic polyurethane (TPU) using a melt-blending approach. The introduction of 3 wt% PCN and Co@PCN could remarkably suppress peak heat release rate (pHRR) (48.5% and 40.0%), peak smoke production rate (pSPR) (25.5% and 21.8%), and increasing residues (10.18 wt%→17.04 wt% and 14.08 wt%). Improvements in charring stability and flame retardancy were ascribed to the formation of P-N bonds and P=N bonds in triazine rings, which promoted the retention of P in the condensed phase, which produced additional high-quality residues.

Mesoporous Nanoarchitectures for Electrochemical Energy Conversion and Storage

Mesoporous materials have attracted considerable attention because of their distinctive properties, including high surface areas, large pore sizes, tunable pore structures, controllable chemical compositions, and abundant forms of composite materials. During the last decade, there has been increasing research interest in constructing advanced mesoporous nanomaterials possessing short and open channels with efficient mass diffusion capability and rich accessible active sites for electrochemical energy conversion and storage. Here, the synthesis, structures, and energy-related applications of mesoporous nanomaterials are the main focus. After a brief summary of synthetic methods of mesoporous nanostructures, the delicate design and construction of mesoporous nanomaterials are described in detail through precise tailoring of the particle sizes, pore sizes, and nanostructures. Afterward, their applications as electrode materials for lithium-ion batteries, supercapacitors, water-splitting electrolyzers, and fuel cells are discussed. Finally, the possible development directions and challenges of mesoporous nanomaterials for electrochemical energy conversion and storage are proposed.