MXene Sorbents for Removal of Urea from Dialysate: A Step toward the Wearable Artificial Kidney

Loading Self-Assembly Siliceous Zeolites for Affordable Next-Generation Wearable Artificial Kidney Technology

The global demand for dialysis among patients with end-stage kidney disease has surpassed the capacity of public healthcare, a trend that has intensified. While wearable artificial kidney (WAK) technology is seen as a crucial solution to address this demand, there is an urgent need for both efficient and renewable toxin-adsorbent materials to overcome the long-standing technological challenges in terms of cost, device size, and sustainability. In this study, we employed screening experiments for adsorbent materials, multimodal characterization, and Monte Carlo adsorption simulations to identify a synthetic self-assembly silicalite-1 zeolite that exhibits highly ordered crystal arrays along the [010] face (b-axis) direction, demonstrating exceptional adsorption capabilities for small molecular toxins such as creatinine and urea associated with uremia. Moreover, this metal-free, cost-effective, easily synthesized, and highly efficient toxin adsorbent could be regenerated through calcination without compromising the performance. The simulated toxin adsorption experiments and comprehensive biocompatibility verification position it as an auxiliary adsorbent to reduce dialysate dosages in WAK devices as well as a potential adsorbent for small-molecule toxins in dialysis. This work is poised to propel the development of next-generation WAK devices by providing siliceous adsorbent solutions for small-molecule toxins.

Putting advanced materials to the test: Ti3C2 MXenes alleviate the hazardous effects of the environmental pollutant benzo[a]pyrene

Advanced materials are materials that have been engineered to exhibit novel or enhanced properties that confer superior performance when compared to conventional materials. Here, we evaluated the impact of Ti3C2 MXenes, a two-dimensional (2D) material, on the adverse effects caused by polycyclic aromatic hydrocarbons. To this end, we studied benzo[a]pyrene denoted here as B[a]P as a model compound. B[a]P was found to adsorb to MXenes as evidenced by UV-Vis spectroscopy. MXenes in the presence or absence of natural organic matter (NOM) were well tolerated by zebrafish embryos. The uptake (ingestion) of MXenes by zebrafish was determined by quantifying the Ti content using inductively coupled plasma mass spectrometry (ICP-MS) while Raman confocal mapping was applied for the label-free identification of MXenes in situ in exposed zebrafish. The body burden of B[a]P was determined by gas chromatography-mass spectrometry (GC-MS). The potential impact of MXenes on B[a]P triggered aryl hydrocarbon receptor (AhR) induction was assessed by evaluating the induction of downstream genes including cyp1a, and results were validated by using the transgenic zebrafish reporter tg(cyp1a-eGFP). The potential impact of MXenes on the genotoxicity caused by B[a]P was also assessed. MXenes were shown to ameliorate AhR induction and DNA damage caused by B[a]P. This was corroborated by using the human colon-derived cell line HT-29. Taken together, MXenes were found to be non-hazardous and alleviated the adverse effects caused by B[a]P in vitro and in vivo.

Sustainable urea treatment by environmental-friendly and highly hydrophilic vesicle-like iron phosphate-based carbon

Despite the versatile potential applications of urea, its unfavorable characteristics for conventional treatment methods hinder its utilization. Therefore, this study developed vesicle-like iron phosphate-based carbon (IP@C400) as a breakthrough urea removal and recovery material for a wide range of urea-containing sources. IP@C400 rapidly exhibited an exceptional capacity (2242 mg/g in 1 h) across a wide range of pH, even in synthetic hemodialysis wastewater with high urea concentrations and diverse co-existing components, compared with the 60 prominent adsorbents. The adsorption process followed dual Pseudo-kinetic, Langmuir-isotherm models with the involvement of primary robust physical (i.e., H-bonding and electrostatic interaction) and chemical mechanisms (i.e., hydrolysis). Remarkably, IP@C400 can maintain high urea removal (90 %) or recovery efficiency (95 %) even after 10 cycles with minimal leakages of Fe and P (far below WHO and EUWFD standards)-a significant improvement over disposable options. IP@C400 could also perform efficiently on batch and a new approach integrating with a naturally accessible material based on the fixed-bed column using low-range urea realistic samples, achieving 65.2 L water over 10 cycles with undetected urea, neutral pH, and well-aligned water safety standards with a minimal adsorbent dose (0.1 g.L-1) and economical cost ($0.05 L-1). Lastly, its environmentally friendly nature, which contains essential nutrients for plant growth, further enhances its recyclability after release. Thus, IP@C400 offers a solution to environmental sustainability and the urgent ultrapure water issue that industries are facing.

Research progress on blood compatibility of hemoperfusion adsorbent materials

This comprehensive review examines the latest developments in improving the blood compatibility of hemoperfusion adsorbents. By leveraging advanced coating and modification techniques, including albumin-collodion, cellulose, hydrogel, and heparin coatings, notable enhancements in blood compatibility have been achieved across diverse adsorbent types, such as carbon-based, resin-based, and polysaccharide-based materials. Despite promising laboratory results, the intricate manufacturing processes and elevated costs present significant challenges for broad clinical application. Therefore, future endeavors should focus on cost-benefit analysis, large-scale production strategies, in-depth exploration of blood-material interactions, and innovative technologies to propel the development of safer and more effective blood purification therapies.

MXene/Carbon Nanocomposites for Water Treatment

One of the most critical problems faced by modern civilization is the depletion of freshwater resources due to their continuous consumption and contamination with different organic and inorganic pollutants. This paper considers the potential of already discovered MXenes in combination with carbon nanomaterials to address this problem. MXene appears to be a highly promising candidate for water purification due to its large surface area and electrochemical activity. However, the problems of swelling, stability, high cost, and scalability need to be overcome. The synthesis methods for MXene and its composites with graphene oxide, carbon nanotubes, carbon nanofibers, and cellulose nanofibers, along with their structure, properties, and mechanisms for removing various pollutants from water, are described. This review discusses the synthesis methods, properties, and mechanisms of water purification using MXene and its composites. It also explores the fundamental aspects of MXene/carbon nanocomposites in various forms, such as membranes, aerogels, and textiles. A comparative analysis of the latest research on this topic shows the progress in this field and the limitations for the practical application of MXene/carbon nanocomposites to solve the problem of drinking water scarcity. Consequently, this review demonstrates the relevance and promise of the material and underscores the importance of further research and development of MXene/carbon nanocomposites to provide effective water treatment solutions.

Biomimetic Porous MXene Antibacterial Adsorbents with Enhanced Toxins Trapping Ability for Hemoperfusion

2D transition metal carbides and nitrides, i.e., MXene, are recently attracting wide attentions and presenting competitive performances as adsorbents used in hemoperfusion. Nonetheless, the nonporous texture and easily restacking feature limit the efficient adsorption of toxin molecules inside MXene and between layers. To circumvent this concern, here a plerogyra sinuosa biomimetic porous titanium carbide MXene (P-Ti3C2) is reported. The hollow and hierarchically porous structure with large surface area benefits the maximum access of toxins as well as trapping them inside the spherical cavity. The cambered surface of P-Ti3C2 prevents layers restacking, thus affording better interlaminar adsorption. In addition to enhanced toxin removal ability, the P-Ti3C2 is found to selectively adsorb more middle and large toxin molecules than small toxin molecules. It possibly originates from the rich Ti-deficient vacancies in the P-MXene lattice that increases the affinity with middle/large toxin molecules. Also, the vacancies as active sites facilitate the production of reactive oxygen under NIR irradiation to promote the photodynamic antibacterial performance. Then, the versatility of P-MXene is validated by extension to niobium carbide (P-Nb2C). And the simulated hemoperfusion proves the practicability of the P-MXene as polymeric adhesives-free adsorbents to eliminate the broad-spectrum toxins.

Fabrication of 2D Vanadium MXene Polyphenylsulfone Ultrafiltration Membrane for Enhancing the Water Flux and for Effective Separation of Humic Acid and Dyes from Wastewater

MXene, a new 2D transition metal carbide-based material, is gaining outstanding attention in recent days in the area of separation and purification. In this study, we have successfully synthesized vanadium-based MXene-V2CT x (where T represents functional groups such as -OH, O, and F) by etching an aluminum layer from V2AlC. For the first time, a vanadium-based MXene-V2CT x -embedded mixed matrix membrane was fabricated and utilized for removal of hazardous dye and humic acid from wastewater. With an increase in V2CT x loading, the hydrophilicity of the polyphenylsulfone (PPSU) membrane reasonably improved, and its water contact angle was reduced from 82.8 to 70.9°. V2CT x nanosheet-embedded PPSU membrane exhibited an excellent pure water permeability of 247 L m-2 h-1, which was 266% elevated than the pristine PPSU membrane. The V2CT x -PPSU membrane revealed a good antifouling nature, thermal stability, and 98.5% removal of humic acid. The optimal membrane exhibited 96.6 and 82.02% expulsion of Reactive Black 5 (RB 5) dye and Reactive Orange 16 (RO 16) dye, respectively. The flux for RO 16 and RB 5 dyes and humic acid were remarkable with a value of 202.02, 161.61, and 141.41 L m-2 h-1, respectively. This work provides a new V2CT x -incorporated PPSU ultrafiltration membrane to effectively treat humic acid and dye wastewater.

Activated carbon and their nanocomposites derived from vegetable and fruit residues for water treatment

Water pollution remains a pressing environmental issue, with diverse pollutants such as heavy metals, pharmaceuticals, dyes, and aromatic hydrocarbon compounds posing a significant threat to clean water access. Historically, biomass-derived activated carbons (ACs) have served as effective adsorbents for water treatment, owing to their inherent porosity and expansive surface area. Nanocomposites have emerged as a means to enhance the absorption properties of ACs, surpassing conventional AC performance. Biomass-based activated carbon nanocomposites (ACNCs) hold promise due to their high surface area and cost-effectiveness. This review explores recent advancements in biomass-based ACNCs, emphasizing their remarkable adsorption efficiencies and paving the way for future research in developing efficient and affordable ACNCs. Leveraging real-time communication for ACNC applications presents a viable approach to addressing cost concerns.

The Revival of Sorbents in Chronic Dialysis Treatment

Interest in the use of sorbents in chronic dialysis treatment has undergone a revival in the last decades, for which two major factors are responsible. The first is the potential of sorbents as adjunct therapy for the removal of substances that are difficult to remove by conventional dialysis therapies. The second is their use in regeneration of dialysate, which is of pivotal importance in the design of portable or even wearable treatments, next to the potential for reducing water use during conventional dialysis treatment. Sorbent-enhanced dialysis with synthetic polymers was associated with a reduction in inflammatory parameters as compared to hemodialysis and even associated with improved survival in smaller studies, although this needs to be confirmed in large randomized trials. Incorporation of sorbents within a dialysis membrane (mixed matrix membrane) appears a promising way forward to reduce the complexity and costs of a dual therapy but needs to be tested in vivo. For regeneration of dialysate, at present, a combination of urease, zirconium-based sorbents, and activated charcoal is used. Next to sodium release by the sorbent in exchange for ammonium and the CO2 release by the hydrolysis of urea has been a bottleneck in the design of wearable devices, although short-term trials have been performed. Still, for widespread and flexible application of sorbent-assisted portable or wearable devices, a direct urea sorbent would be a major asset. In the near future, it will likely become apparent whether sorbent-assisted dialysis techniques are feasible for routine implementation in clinical practice.

MXenes as emerging adsorbents for removal of environmental pollutants

MXenes are a recently emerging class of two-dimensional nanomaterials that have gained considerable interest in the field of environmental protection. Owing to their high surface area, abundant terminal groups, and unique two-dimensional layered structures, MXenes have demonstrated high efficacy as adsorbents for various pollutants. Here we focused on the latest developments in the field of MXene-based adsorbents, including the structure and properties of MXenes, their synthesis and modification methods, and their adsorption performance and mechanisms for various pollutants. Among the pollutants that have been reported to be adsorbed by MXenes are radionuclides (U(VI), Sr(II), Cs(I), Eu(III), Ba(II), Th(IV), and Tc(VII)/Re(VII)), heavy metals (Hg(II), Cu(II), Cr(VI), and Pb(II)), dyes, per- and polyfluoroalkyl substances (PFAS), antibiotics (tetracycline, ciprofloxacin, and sulfonamides), antibiotic resistance genes (ARGs), and other contaminates. Moreover, future directions in MXene research are also suggested in this review.

MXene-based electrochemical devices applied for healthcare applications

The initial part of the review provides an extensive overview about MXenes as novel and exciting 2D nanomaterials describing their basic physico-chemical features, methods of their synthesis, and possible interfacial modifications and techniques, which could be applied to the characterization of MXenes. Unique physico-chemical parameters of MXenes make them attractive for many practical applications, which are shortly discussed. Use of MXenes for healthcare applications is a hot scientific discipline which is discussed in detail. The article focuses on determination of low molecular weight analytes (metabolites), high molecular weight analytes (DNA/RNA and proteins), or even cells, exosomes, and viruses detected using electrochemical sensors and biosensors. Separate chapters are provided to show the potential of MXene-based devices for determination of cancer biomarkers and as wearable sensors and biosensors for monitoring of a wide range of human activities.

Dynamic coordination engineering of 2D PhenPtCl2 nanosheets for superior hydrogen evolution

Exploring the dynamic structural evolution of electrocatalysts during reactions represents a fundamental objective in the realm of electrocatalytic mechanism research. In pursuit of this objective, we synthesized PhenPtCl2 nanosheets, revealing a N2-Pt-Cl2 coordination structure through various characterization techniques. Remarkably, the electrocatalytic performance of these PhenPtCl2 nanosheets for hydrogen evolution reaction (HER) surpasses that of the commercial Pt/C catalyst across the entire pH range. Furthermore, our discovery of the dynamic coordination changes occurring in the N2-Pt-Cl2 active sites during the electrocatalytic process, as clarified through in situ Raman and X-ray photoelectron spectroscopy, is particularly noteworthy. These changes transition from Phen-Pt-Cl2 to Phen-Pt-Cl and ultimately to Phen-Pt. The Phen-Pt intermediate plays a pivotal role in the electrocatalytic HER, dynamically coordinating with Cl- ions in the electrolyte. Additionally, the unsaturated, two-coordinated Pt within Phen-Pt provides additional space and electrons to enhance both H+ adsorption and H2 evolution. This research illuminates the intricate dynamic coordination evolution and structural adaptability of PhenPtCl2 nanosheets, firmly establishing them as a promising candidate for efficient and tunable electrocatalysts.

Textured Asymmetric Membrane Electrode Assemblies of Piezoelectric Phosphorene and Ti3C2Tx MXene Heterostructures for Enhanced Electrochemical Stability and Kinetics in LIBs

Black phosphorus with a superior theoretical capacity (2596 mAh g-1) and high conductivity is regarded as one of the powerful candidates for lithium-ion battery (LIB) anode materials, whereas the severe volume expansion and sluggish kinetics still impede its applications in LIBs. By contrast, the exfoliated two-dimensional phosphorene owns negligible volume variation, and its intrinsic piezoelectricity is considered to be beneficial to the Li-ion transfer kinetics, while its positive influence has not been discussed yet. Herein, a phosphorene/MXene heterostructure-textured nanopiezocomposite is proposed with even phosphorene distribution and enhanced piezo-electrochemical coupling as an applicable free-standing asymmetric membrane electrode beyond the skin effect for enhanced Li-ion storage. The experimental and simulation analysis reveals that the embedded phosphorene nanosheets not only provide abundant active sites for Li-ions, but also endow the nanocomposite with favorable piezoelectricity, thus promoting the Li-ion transfer kinetics by generating the piezoelectric field serving as an extra accelerator. By waltzing with the MXene framework, the optimized electrode exhibits enhanced kinetics and stability, achieving stable cycling performances for 1,000 cycles at 2 A g-1, and delivering a high reversible capacity of 524 mAh g-1 at - 20 ℃, indicating the positive influence of the structural merits of self-assembled nanopiezocomposites on promoting stability and kinetics.

From Home to Wearable Hemodialysis: Barriers, Progress, and Opportunities

Although the past two decades have seen substantial proportional growth of home hemodialysis in the United States, the absolute number of patients treated with home hemodialysis remains small. Currently available stationary hemodialysis devices for use in the home have inherent limitations that represent barriers for more widespread adoption by a larger proportion of individuals with kidney failure. These limitations include device weight and bulk, ergonomics considerations, technical complexity, vascular access challenges, and limited remote patient monitoring. Recent years have witnessed a resurgence in research and development of prototype wearable kidney replacement devices incorporating innovations in miniaturization, new biomaterials, and new methods for toxin clearance and dialysate regeneration. Recent work has built on five decades of incremental innovation in wearable dialysis concepts and prototypes, starting from the work by Kolff in the 1970s. Wearable dialysis devices that successfully overcome key persistent barriers to successful development and adoption of these technologies will radically reshape the landscape of kidney replacement therapies and have the potential to dramatically improve the lives of individuals living with kidney failure.

Elucidation of the synergistic effects of 3d metal (M = Cu, Co, and Ni) dopants and terminations (T = -O- and -OH) of Ti3C2Tx MXenes for urea adsorption ability via DFT calculations and experiments

Dialysis is an artificial process to remove excess urea toxins from the body through adsorption or conversion. Urea adsorption by emergent 2D materials such as MXenes is one probable approach. Based on density functional theory (DFT) studies, the surface of Ti3C2Tx (T = -O- and -OH) MXenes is not optimum for urea adsorption. Therefore, functionalization with 3d metal dopants (Cu, Co, and Ni) is proposed to improve their urea adsorption ability. DFT calculations indicate that oxygen-terminated Ti3C2O2 has a much better urea adsorption ability when doped with Cu, Co, and Ni, with adsorption energy (Eads) values of -2.11 eV, -1.90 eV and -1.72 eV, respectively. These adsorption energies are much more favourable than that of the undoped one (Eads = -0.52 eV). To verify the calculation results, MILD Ti3C2Tx, or MXenes synthesized via the safer and easier minimally intensive layer delamination (MILD) method, were utilized to simulate Ti3C2O2 since they have -O- termination as the dominant species. Experimentally, the adsorption studies found that low concentration of Cu, Co, and Ni on MILD Ti3C2Tx showed a urea removal efficiency of 21.9%, 6.0% and 0.2%, respectively, much better than 0% removal efficiency of unfunctionalized Ti3C2Tx. Therefore, both DFT calculations and experiments showed that various metal functionalized MXenes have a similar trend for urea adsorption, highlighting the feasibility of using the computational approach to predict urea adsorption and further opening a new promising direction for the urea adsorption. Finally, this study is also the first to examine synergistic effects of metal dopants and surface terminations on MXenes for urea adsorption.

Heparin-Mimetic Chitooligosaccharides-Based Monoliths Obtained from C/W Emulsions: Hemocompatibility and Toxin Removal Ability

Hemoperfusion (HP) is one of the most prominent therapies for treating uremia, hyperbilirubinemia, and acute drug toxicity. The comprehensive performance of currently used porous HP adsorbents needs to be improved due to the impediment to their synthesis strategy. Herein, green carbon dioxide-in-water high internal phase emulsions (C/W HIPEs) were utilized and emulsified with poly(vinyl alcohol) (PVA) for the formation of a heparin-mimetic chitosan oligosaccharides/poly(acrylamide-co-sodium 4-styrenesulfonate) [COS/P(AM-co-SSS)] monolith, which exhibited good mechanical properties, stable swelling performance, hydrophilic properties, anticoagulant effect, and low hemolysis. It showed a strong toxin adsorption capacity (415.2 mg/g for creatinine, 199.3 mg/g for urea, 279.5 mg/g for bilirubin, and 160 mg/g for tetracycline). The adsorption process of porous COS/P(AM-co-SSS) followed the pseudo-second-order kinetic and Langmuir isotherm models. Moreover, the porous materials had a strong electrostatic force on creatinine. The removal of creatinine by simulated in vitro blood perfusion was 80.2% within 30 min. This work provides a green preparation strategy for developing novel HP materials, highlighting their potential application value in blood and environmental purification.

Exploring the Synergies of Single-Molecule Fluorescence and 2D Materials Coupled by DNA

The world of 2D materials is steadily growing, with numerous researchers attempting to discover, elucidate, and exploit their properties. Approaches relying on the detection of single fluorescent molecules offer a set of advantages, for instance, high sensitivity and specificity, that allow the drawing of conclusions with unprecedented precision. Herein, it is argued how the study of 2D materials benefits from fluorescence-based single-molecule modalities, and vice versa. A special focus is placed on DNA, serving as a versatile adaptor when anchoring single dye molecules to 2D materials. The existing literature on the fruitful combination of the two fields is reviewed, and an outlook on the additional synergies that can be created between them provided.

In silico screening of nanoporous materials for urea removal in hemodialysis applications

The design of miniaturized hemodialysis devices, such as wearable artificial kidneys, requires regeneration of the dialysate stream to remove uremic toxins from water. Adsorption has the potential to capture such molecules, but conventional adsorbents have low urea/water selectivity. In this work, we performed a comprehensive computational study of 560 porous crystalline adsorbents comprising mainly covalent organic frameworks (COFs), as well as some siliceous zeolites, metal organic frameworks (MOFs) and graphitic materials. An initial screening using Widom insertion method assessed the excess chemical potential at infinite dilution for water and urea at 310 K, providing information on the strength and selectivity of urea adsorption. From such analysis it was observed that urea adsorption and urea/water selectivity increased strongly with fluorine content in COFs, while other compositional or structural parameters did not correlate with material performance. Two COFs, namely COF-F6 and Tf-DHzDPr were explored further through Molecular Dynamics simulations. The results agree with those of the Widom method and allow to identify the urea binding sites, the contribution of electrostatic and van der Waals interactions, and the position of preferential urea-urea and urea-framework interactions. This study paves the way for a well-informed experimental campaign and accelerates the development of novel sorbents for urea removal, ultimately advancing on the path to achieve wearable artificial kidneys.

Can MXene be the Effective Nanomaterial Family for the Membrane and Adsorption Technologies to Reach a Sustainable Green World?

Environmental pollution has intensified and accelerated due to a steady increase in the number of industries, and exploring methods to remove hazardous contaminants, which can be typically divided into inorganic and organic compounds, have become inevitable. Therefore, the development of efficacious technology for the separation processes is of paramount importance to ensure the environmental remediation. Membrane and adsorption technologies garnered attention, especially with the use of novel and high performing nanomaterials, which provide a target-specific solution. Specifically, widespread use of MXene nanomaterials in membrane and adsorption technologies has emerged due to their intriguing characteristics, combined with outstanding separation performance. In this review, we demonstrated the intrinsic properties of the MXene family for several separation applications, namely, gas separation, solvent dehydration, dye removal, separation of oil-in-water emulsions, heavy metal ion removal, removal of radionuclides, desalination, and other prominent separation applications. We highlighted the recent advancements used to tune separation potential of the MXene family such as the manipulation of surface chemistry, delamination or intercalation methods, and fabrication of composite or nanocomposite materials. Moreover, we focused on the aspects of stability, fouling, regenerability, and swelling, which deserve special attention when the MXene family is implemented in membrane and adsorption-based separation applications.

V4 C3 MXene Immune Profiling and Modulation of T Cell-Dendritic Cell Function and Interaction

Although vanadium-based metallodrugs are recently explored for their effective anti-inflammatory activity, they frequently cause undesired side effects. Among 2D nanomaterials, transition metal carbides (MXenes) have received substantial attention for their promise as biomedical platforms. It is hypothesized that vanadium immune properties can be extended to MXene compounds. Therefore, vanadium carbide MXene (V4 C3 ) is synthetized, evaluating its biocompatibility and intrinsic immunomodulatory effects. By combining multiple experimental approaches in vitro and ex vivo on human primary immune cells, MXene effects on hemolysis, apoptosis, necrosis, activation, and cytokine production are investigated. Furthermore, V4 C3 ability is demonstrated to inhibit T cell-dendritic cell interactions, evaluating the modulation of CD40-CD40 ligand interaction, two key costimulatory molecules for immune activation. The material biocompatibility at the single-cell level on 17 human immune cell subpopulations by single-cell mass cytometry is confirmed. Finally, the molecular mechanism underlying V4 C3 immune modulation is explored, demonstrating a MXene-mediated downregulation of antigen presentation-associated genes in primary human immune cells. The findings set the basis for further V4 C3 investigation and application as a negative modulator of the immune response in inflammatory and autoimmune diseases.

Two-Dimensional Theoretical Analysis and Experimental Study of Mass Transfer in a Hollow-Fiber Dialysis Module Coupled with Ultrafiltration Operations

This research theoretically and experimentally develops a hollow-fiber dialysis module coupled with ultrafiltration operations by introducing a trans-membrane pressure during the membrane dialysis process, which can be applied to the waste metabolic end products in the human body for improving the dialysis efficiency. The solutes were transported by both diffusion and convection from the concentration driving-force gradient between retentate and dialysate phases across the membrane, compared to the traditional dialysis processes by diffusion only. A two-dimensional modeling of such a dialysis-and-ultrafiltration system in the hollow-fiber dialysis module was formulated and solved using the stream function coupled with the perturbation method to obtain the velocity distributions of retentate and dialysate phases, respectively. The purpose of the present work is to investigate the effect of ultrafiltration on the dialysis rate in the hollow-fiber dialyzer with ultrafiltration operations. A highest level of dialysis rate improvement up to about seven times (say 674.65% under Va=20 mL/min) was found in the module with ultrafiltration rate Vw=10 mL/min and membrane sieving coefficient θ=1, compared to that in the system without operating ultrafiltration. Considerable dialysis rate improvements on mass transfer were obtained by implementing a hollow-fiber dialysis-and-ultrafiltration system, instead of using the hollow-fiber dialyzer without ultrafiltration operation. The experimental runs were carried out under the same operating conditions for the hollow-fiber dialyzers of the two experimental runs with and without ultrafiltration operations for comparisons. A very reasonable prediction by the proposed mathematical model was observed.

Microenvironment Restruction of Emerging 2D Materials and their Roles in Therapeutic and Diagnostic Nano-Bio-Platforms

Engineering advanced therapeutic and diagnostic nano-bio-platforms (NBPFs) have emerged as rapidly-developed pathways against a wide range of challenges in antitumor, antipathogen, tissue regeneration, bioimaging, and biosensing applications. Emerged 2D materials have attracted extensive scientific interest as fundamental building blocks or nanostructures among material scientists, chemists, biologists, and doctors due to their advantageous physicochemical and biological properties. This timely review provides a comprehensive summary of creating advanced NBPFs via emerging 2D materials (2D-NBPFs) with unique insights into the corresponding molecularly restructured microenvironments and biofunctionalities. First, it is focused on an up-to-date overview of the synthetic strategies for designing 2D-NBPFs with a cross-comparison of their advantages and disadvantages. After that, the recent key achievements are summarized in tuning the biofunctionalities of 2D-NBPFs via molecularly programmed microenvironments, including physiological stability, biocompatibility, bio-adhesiveness, specific binding to pathogens, broad-spectrum pathogen inhibitors, stimuli-responsive systems, and enzyme-mimetics. Moreover, the representative therapeutic and diagnostic applications of 2D-NBPFs are also discussed with detailed disclosure of their critical design principles and parameters. Finally, current challenges and future research directions are also discussed. Overall, this review will provide cutting-edge and multidisciplinary guidance for accelerating future developments and therapeutic/diagnostic applications of 2D-NBPFs.

Improving the adsorption performance of urea by using polyhydroxy groups to modify two-dimensional Ti3C2Tx

Wearable artificial kidney can provide continuous dynamic dialysis for uremia patients. For the sake of practical application, the critical step is to find an adsorbent that can effectively remove urea and have excellent biological compatibility. The layered Ti3C2Tx (DL-Ti3C2Tx) with high specific surface area and good dispersion was prepared by a two-step etching method. From the first principles calculation, urea can be adsorbed by different groups (-F, -O, -OH) on the surface of Ti3C2Tx, among which -OH has the greatest binding energy to urea. Therefore, DL-Ti3C2Tx was modified with different alkali solutions (KOH, NaOH, LiOH) to introduce -OH on the surface, which can increase the adsorption capacity of urea. The experimental results showed that DL-Ti3C2Tx (LiOH-Ti3C2Tx) after treated by LiOH had the highest urea adsorption efficiency, and the urea removal rate of LiOH-Ti3C2Tx was still higher than 92% when the urea concentration was 500 mg/L. In the Simulated dialysate, Ti3C2Tx treated with three kinds of alkali solutions still maintained a good adsorption efficiency for urea, and still had a certain adsorption capacity after recycling for four times. Biocompatibility experiments showed that Ti3C2Tx in different concentrations did not cause hemolysis of erythrocyte, and had no obvious damage to vascular endothelial cells. This study greatly improves the urea adsorption efficiency of MXene, which has a broad application prospect in the selection of adsorbent for wearable artificial kidney.

Portable, wearable and implantable artificial kidney systems: needs, opportunities and challenges

Haemodialysis is life sustaining but expensive, provides limited removal of uraemic solutes, is associated with poor patient quality of life and has a large carbon footprint. Innovative dialysis technologies such as portable, wearable and implantable artificial kidney systems are being developed with the aim of addressing these issues and improving patient care. An important challenge for these technologies is the need for continuous regeneration of a small volume of dialysate. Dialysate recycling systems based on sorbents have great potential for such regeneration. Novel dialysis membranes composed of polymeric or inorganic materials are being developed to improve the removal of a broad range of uraemic toxins, with low levels of membrane fouling compared with currently available synthetic membranes. To achieve more complete therapy and provide important biological functions, these novel membranes could be combined with bioartificial kidneys, which consist of artificial membranes combined with kidney cells. Implementation of these systems will require robust cell sourcing; cell culture facilities annexed to dialysis centres; large-scale, low-cost production; and quality control measures. These challenges are not trivial, and global initiatives involving all relevant stakeholders, including academics, industrialists, medical professionals and patients with kidney disease, are required to achieve important technological breakthroughs.

Development of high-capacity surface-engineered MXene composite for heavy metal Cr (VI) removal from industrial wastewater

The substantial quantity of Cr(VI) contaminants in the aqueous atmosphere is a major environmental fear that cannot be overlooked. For the first time, MXene and chitosan-coated polyurethane foam have been employed for wastewater treatment, including heavy metal ions (Cr (VI)) through a fixed-bed column study. It is also the most inexpensive, lightweight, and globally friendly material tested. The Mxene and chitosan-coated polyurethane foam hybrid materials were thoroughly investigated using FTIR (Fourier transform infrared), SEM (scanning electron microscope), XPS (X-ray photoelectron spectroscopy) and XRD (X-ray diffraction). The presence of the rough surface and the pore creation in the Mxene- MX₃@CS₃@PUF should rise its surface area, which is useful to interact the surface-active assembly of MX₃@CS₃@PUF and the Cr(VI) contaminations in the aqueous solution. With the help of the ion exchange mechanism and electrostatic contact, negatively charged MXene hexavalent ions were being adsorbed on the surface. MXene and chitosan have been coated on PUF foam in the form of three different layers, which shows the highest adsorption capacity, where up to ∼70% Cr (VI) was removed in the first 10 min and more than 60% elimination after 3 h when the metal ion concentration was 20 ppm. The electrostatic interaction between the negative charge MXene and the positive charge chitosan on the surface of PUF, which was absent in MX@PUF, is accountable for the high removal efficiency. This was done through a sequence of fixed-bed column studies, which took place in the continuous flowing of wastewater.

Device Performance of a Tubular Membrane Dialyzer Incorporating Ultrafiltration Effects on the Dialysis Efficiency

Membrane dialysis is one of the membrane contactors applied to wastewater treatment. The dialysis rate of a traditional dialyzer module is restricted because the solutes transport through the membrane only by diffusion, in which the mass-transfer driving force across the membrane is the concentration gradient between the retentate and dialysate phases. A two-dimensional mathematical model of the concentric tubular dialysis-and-ultrafiltration module was developed theoretically in this study. The simulated results show that the dialysis rate improvement was significantly improved through implementing the ultrafiltration effect by introducing a trans-membrane pressure during the membrane dialysis process. The velocity profiles of the retentate and dialysate phases in the dialysis-and-ultrafiltration system were derived and expressed in terms of the stream function, which was solved numerically by the Crank-Nicolson method. A maximum dialysis rate improvement of up to twice that of the pure dialysis system (Vw=0) was obtained by employing a dialysis system with an ultrafiltration rate of Vw=2 mL/min and a constant membrane sieving coefficient of θ=1. The influences of the concentric tubular radius, ultrafiltration fluxes and membrane sieve factor on the outlet retentate concentration and mass transfer rate are also illustrated.

Divalent Oxidation State Ni as an Active Intermediate in Prussian Blue Analogues for Electrocatalytic Urea Oxidation

Urea degradation is one of the most crucial links in the natural nitrogen cycle. Exploring the real active species in the urea electro-oxidation process is of great significance for understanding the urea electro-oxidation mechanism and designing catalysts. A highly active and stable Prussian blue analogue catalyst (PBA@NiFe/NF) loaded on nickel foam was synthesized for electro-oxidation of urea. In situ Raman spectra revealed that Ni in PBA@NiFe/NF was able to maintain a stable divalent nickel (Ni(II)) state for up to 3.5 h during the initial urea oxidation process, which is rarely reported in previous research studies. In addition, with the participation of iron, the Ni-Fe bimetallic center significantly improves the electro-oxidation of urea. Our work provides a new idea for prolonging the Ni(II) activity in electrocatalytic oxidation of urea.

Latest advances on MXenes in biomedical research and health care

The unique combination of physical and chemical properties of MXenes has propelled a growing number of applications in biomedicine and healthcare. The expanding library of MXenes with tunable properties is paving the way for high-performance, application-specific MXene-based sensing and therapeutic platforms. In this article, we highlight the emerging biomedical applications of MXenes with specific emphasis on bioelectronics, biosensors, tissue engineering, and therapeutics. We present examples of MXenes and their composites enabling novel technological platforms and therapeutic strategies, and elucidate potential avenues for further developments. Finally, we discuss the materials, manufacturing, and regulatory challenges that need to be synergistically addressed for the clinical translation of MXene-based biomedical technologies.

Graphical abstract

Electrostatic Interfacial Cross-Linking and Structurally Oriented Fiber Constructed by Surface-Modified 2D MXene for High-Performance Flexible Pseudocapacitive Storage

Fiber supercapacitors are promising power supplies suitable for wearable electronics, but the internally insufficient cross-linking and random structure of fiber electrodes restrict their performance. This study describes how interfacial cross-linking and oriented structure can fabricate an MXene fiber with high flexibility and electrochemical performance. The continuous and highly oriented macroscopic fibers were constructed by 2D MXene sheets via a liquid-crystalline wet-spinning assembly. The oxyanion-enriched terminations of surface-modified MXene in situ could reinforce the interfacial cross-linking by electrostatic interactions while mediating the sheet-to-sheet lamellar structure within the fiber. The resultant MXene fiber exhibits high electrical conductivity (3545 S cm^-1) and mechanical strength (205.5 MPa) and high pseudocapacitance charge storage capability up to 1570.5 F cm^-3. Notably, the assembled fiber supercapacitor delivers an energy density of 77.6 mWh cm^-3 at 401.9 mW cm^-3, exceptional flexibility and stability exhibiting ∼99.5% capacitance retention under mechanical deformation, and can be integrated into commercial textiles to power microelectronic devices. This work provides insight into the fabrication of an advanced MXene fiber and the development of high-performance flexible fiber supercapacitors.

In-silico study on viability of MXenes in suppressing the coronavirus infection and distribution

Herein, based on the paramount importance of combating emerging diseases, through employing a detailed in-silico study, the possibility of using MXenes in suppressing the coronavirus infection was elucidated. To this end, first, interactions of MXene nanosheets (Mn₂C, Ti₂C, and Mo₂C) and spike protein (SP), the main infecting portion of the COVID-19, were investigated. It was found that the modeled MXenes were effective in attracting the SP, so that they can be exploited in filtering the coronavirus. In addition, the effect of the MXenes on the SP structure was assessed which demonstrated that the secondary structure of the SP could be changed. Therefore, the post-interactions of the SP/ACE2 (receptor of coronavirus in the body) could be interrupted, declaring the lower chance of coronavirus infecting. The in-silico studies revealed that the MXenes not only can be used to adsorb and hinder the distribution of the coronavirus but also affect the SP structure and the SP/ACE2 interactions to interrupt the COVID-19 threat. Therefore, MXenes can be exploited with simultaneous roles in physical inhibition and reactive weakening of the COVID-19. In this regard, the Mn₂C nanosheet was well suited, which is suggested as a promising candidate to combat the coronavirus.

MXenes and MXene-supported nanocomposites: a novel materials for aqueous environmental remediation

Water contamination has become a significant issue on a global scale. Adsorption is a cost-effective way to treat water and wastewater compared to other techniques such as the Advanced Oxidation Processes (AOPs), photocatalytic degradation, membrane filtration etc. Numerous research experts are continuously developing inexpensive substances for the adsorptive removal of organic contaminants from wastewater. A fresh and intriguing area of inquiry has emerged as a result of the development of MXenes. This article aims to provide a preliminary understanding of MXenes from synthesis, structure, and characterization to the scope of further research. The applications of MXenes as a new generation adsorbent for remediation of various kinds of organic pollutants and heavy metals from wastewater are also summarized. MXenes with altered surfaces may make effective adsorbents for wastewater treatment. Lastly, the mechanism of adsorption of organic contaminants and heavy metals on MXenes is also discussed for a better understanding of the readers.

Synthesis of MAX Phase Nanofibers and Nanoflakes and the Resulting MXenes

Layered ternary carbides and nitrides, also known as MAX phases, have attracted enormous attention for many applications, especially as precursors to produce 2D metal carbides and nitrides called MXenes. However, it is still challenging to tune and control the shape/morphology of MAX phase particles at the nanoscale, as they are typically manufactured as large grains using ceramic technology. Herein, nanostructured Ti-Al-C MAX phases with fine-tuned morphology of nanofibers and nanoflakes are prepared by using 1D and 2D carbon precursors at a synthesis temperature of 900 °C. The nanostructured MAX phases are used as precursors to produce nanosized multilayered MXenes, with a considerably shorter etching time and a low reaction temperature. These nanosized MXenes exhibit good electrochemical lithium-ion storage properties and a pseudocapacitive electrochemical signature. The obtained Ti2 CTx MXene electrode can deliver delithiation capacity of 300 mAh g-1 at low rates and 100 mAh g-1 when the lithiation/delithiation cycle happens within 30 s. Availability of nanoscale MAX phases and MXene nanoflakes with small lateral size may open new opportunities for both classes of materials.

Current Status and Future of Artificial Kidney in Humans

The number of patients needing renal replacement therapy (RRT) is increasing rapidly with an increase in lifestyle diseases such as diabetes, hypertension, and metabolic syndrome. Kidney transplantation, whenever feasible, is the most preferred mode of RRT. However, there is a growing shortage of donor kidneys for transplantation. While dialysis is partially able to perform the filtration and excretion function of the kidneys, it is still not able to perform the other renal tubular and endocrine functions of a normal kidney and has quality-of-life issues with significant long-term morbidity. The need of the hour is to develop an ideal artificial kidney that would be wearable or implantable and would be able to perform the complete excretory, filtration, tubular, endocrine, and metabolic functions of the kidney while preserving the quality of life and minimizing complications. In this review, we discuss the characteristics of an ideal artificial kidney, the challenges of developing such a device, a brief description of the past and current work on this topic, and what the artificial kidney of the future should look like.

Evaluation and characterization of starch nanoparticles for adsorption of urea from dialysates

Starch nanoparticles (SNPs) was produced from type-A, B and C native starches (corn, potato and Trichosanthes kirilowii pulp starches respectively), via the nanoprecipitation method. The SNPs showed different amylose contents, water contact angles, surface morphologies and urea clearance performances. In this work, to examine the parameters of SNPs that may change the urea adsorption capacity, urea adsorption performance in adsorption environments with different pH values, urea concentrations, and adsorption times was examined. Thereafter, the characteristics of SNPs were tested by water contact angle measurements (WCA), transmission electron microscopy, specific surface area measurements, gel permeation chromatography, and zeta potential analysis. The results showed that the Trichosanthes kirilowii pulp (C) SNPs show better adsorption than the corn (A) and potato (B) SNPs. The hydrophobicity of SNPs promotes the urea adsorption of the SNPs. Using grey relational analysis, it was found that WCA and Mn are the critical parameter affecting the adsorption performance, with WCA and Mn within the ranges of 31-33° and 1900-2100 kDa, respectively, were found to be the conditions for optimal urea adsorption.

Recent advances and trends in the applications of MXene nanomaterials for tissue engineering and regeneration

MXene, as a new two-dimensional nanomaterial, is endowed with lots of particular properties, such as large surface area, excellent conductivity, biocompatibility, biodegradability, hydrophilicity, antibacterial activity, and so on. In the past few years, MXene nanomaterials have become a rising star in biomedical fields including biological imaging, tumor diagnosis, biosensor, and tissue engineering. In this review, we sum up the recent applications of MXene nanomaterials in the field of tissue engineering and regeneration. First, we briefly introduced the synthesis and surface modification engineering of MXene. Then we focused on the application and development of MXene and MXene-based composites in skin, bone, nerve and heart tissue engineering. Uniquely, we also paid attention to some research on MXene with few achievements at present but might become a new trend in tissue engineering and regeneration in the future. Finally, this paper will also discuss several challenges faced by MXene nanomaterials in the clinical application of tissue engineering.

MXenes as Emerging Materials: Synthesis, Properties, and Applications

Due to their unique layered microstructure, the presence of various functional groups at the surface, earth abundance, and attractive electrical, optical, and thermal properties, MXenes are considered promising candidates for the solution of energy- and environmental-related problems. It is seen that the energy conversion and storage capacity of MXenes can be enhanced by changing the material dimensions, chemical composition, structure, and surface chemistry. Hence, it is also essential to understand how one can easily improve the structure-property relationship from an applied point of view. In the current review, we reviewed the fabrication, properties, and potential applications of MXenes. In addition, various properties of MXenes such as structural, optical, electrical, thermal, chemical, and mechanical have been discussed. Furthermore, the potential applications of MXenes in the areas of photocatalysis, electrocatalysis, nitrogen fixation, gas sensing, cancer therapy, and supercapacitors have also been outlooked. Based on the reported works, it could easily be observed that the properties and applications of MXenes can be further enhanced by applying various modification and functionalization approaches. This review also emphasizes the recent developments and future perspectives of MXenes-based composite materials, which will greatly help scientists working in the fields of academia and material science.

An overview of MXene-Based nanomaterials and their potential applications towards hazardous pollutant adsorption

With the massive development of industrialization, multiple ecological contaminants in gaseous, liquid, and solid forms are vented into habitats, which is currently at the forefront of worldwide attention. Because of the possible damage to public health and eco-diversity, high-efficiency clearance of these environmental contaminants is a serious concern. Improved nanomaterials (NMs) could perform a significant part in the exclusion of contaminants from the atmosphere. MXenes, a class of two-dimensional (2D) compounds that have got tremendous consideration from researchers for a broad array of applications in a variety of industries and are viewed as a potential route for innovative solutions to identify and prevent a variety of obstreperous hazardous pollutants from environmental compartments due to their exceptional innate physicochemical and mechanical features, including high specific surface area, physiological interoperability, sturdy electrodynamics, and elevated wettability. This paper discusses the recent progress in MXene-based nanomaterials' applications such as environmental remediation, with a focus on their adsorption-reduction characteristics. The removal of heavy metals, dyes, and radionuclides by MXenes and MXene-based nanomaterials is depicted in detail, with the adsorption mechanism and regeneration potential highlighted. Finally, suggestions for future research are provided to ensure that MXenes and MXene-based nanomaterials are synthesized and applied more effectively.

Surface Functionalized MXenes for Wastewater Treatment-A Comprehensive Review

Over 80% of wastewater worldwide is released into the environment without proper treatment. Whilst environmental pollution continues to intensify due to the increase in the number of polluting industries, conventional techniques employed to clean the environment are poorly effective and are expensive. MXenes are a new class of 2D materials that have received a lot of attention for an extensive range of applications due to their tuneable interlayer spacing and tailorable surface chemistry. Several MXene-based nanomaterials with remarkable properties have been proposed, synthesized, and used in environmental remediation applications. In this work, a comprehensive review of the state-of-the-art research progress on the promising potential of surface functionalized MXenes as photocatalysts, adsorbents, and membranes for wastewater treatment is presented. The sources, composition, and effects of wastewater on human health and the environment are displayed. Furthermore, the synthesis, surface functionalization, and characterization techniques of merit used in the study of MXenes are discussed, detailing the effects of a range of factors (e.g., PH, temperature, precursor, etc.) on the synthesis, surface functionalization, and performance of the resulting MXenes. Finally, the limits of MXenes and MXene-based materials as well as their potential future research directions, especially for wastewater treatment applications are highlighted.

Sustainability and environmental impact of on-line hemodiafiltration

Environment has become a main issue of human activities. Chronic hemodialysis (HD) therapy saves lives but consumes large amounts of water and power and produces a lot of care-related waste. On-line hemodiafiltration (HDF) improves patients' outcomes but increases water consumption from ultra-pure water needs and infusion volume. New-generation water treatment systems have much reduced the proportion of reject water that can also be reused. Reducing the dialysate flow in standard HD decreases significantly the water consumption but impacts negatively dialysis efficiency. When on-line HDF is prescribed, reducing the dialysate flow may be applied to decrease water needs while maintaining dialysis efficiency. Nowadays, dialysis prescription cannot ignore its impact on natural resources and environment.

2D MXenes for combatting COVID-19 Pandemic: A perspective on latest developments and innovations

The COVID-19 pandemic has adversely affected the world, causing enormous loss of lives. A greater impact on the economy was also observed worldwide. During the pandemic, the antimicrobial aprons, face masks, sterilizers, sensor processed touch-free sanitizers, and highly effective diagnostic devices having greater sensitivity and selectivity helped to foster the healthcare facilities. Furthermore, the research and development sectors are tackling this emergency with the rapid invention of vaccines and medicines. In this regard, two-dimensional (2D) nanomaterials are greatly explored to combat the extreme severity of the pandemic. Among the nanomaterials, the 2D MXene is a prospective element due to its unique properties like greater surface functionalities, enhanced conductivity, superior hydrophilicity, and excellent photocatalytic and/or photothermal properties. These unique properties of MXene can be utilized to fabricate face masks, PPE kits, face shields, and biomedical instruments like efficient biosensors having greater antiviral activities. MXenes can also cure comorbidities in COVID-19 patients and have high drug loading as well as controlled drug release capacity. Moreover, the remarkable biocompatibility of MXene adds a feather in its cap for diverse biomedical applications. This review briefly explains the different synthesis processes of 2D MXenes, their biocompatibility, cytotoxicity and antiviral features. In addition, this review also discusses the viral cycle of SARS-CoV-2 and its inactivation mechanism using MXene. Finally, various applications of MXene for combatting the COVID-19 pandemic and their future perspectives are discussed.

A critical overview of MXenes adsorption behavior toward heavy metals

In recent years, tremendous interest has been generated in MXenes as a fast-growing and diversified family of two-dimensional (2D) materials with a wide range of potential uses. MXenes exhibit many unique structural and physicochemical properties that make them particularly attractive as adsorbents for removing heavy metals from aqueous media, including a large surface area, abundant surface terminations, electron-richness, and hydrophilic nature. In light of the adsorption capabilities of MXenes at the ever-increasing rate of expansion, this review investigates the recent computational predictions for the adsorption capabilities of MXenes and the effect of synthesis of different MXene on their remediation behavior toward heavy metals. The influence of MXene engineering strategies such as alkalization, acidification, and incorporation into organic and inorganic hosts on their surface properties and adsorption capacity is compared to provide critical insights for designing effective MXene adsorbents. Additionally, the review discusses MXenes' adsorption mechanisms, the effect of coexisting ions on MXenes' selectivity, the regeneration of exhausted MXenes, and provides an overview of MXenes' stability and biocompatibility to demonstrate their potentiality for wastewater remediation. Finally, the review identifies current flaws and offers recommendations for further research.

Strategies for optimizing urea removal to enable portable kidney dialysis: A reappraisal

BACKGROUND

Portable hemodialysis has the potential to improve health outcomes and quality of life for patients with kidney failure at reduced costs. Urea removal, required for dialysate regeneration, is a central function of any existing/potential portable dialysis device. Urea in the spent dialysate coexists with non-urea uremic toxins, nutrients, and electrolytes, all of which will interfere with the urea removal efficiency, regardless of whether the underlying urea removal mechanism is based on urease conversion, direct urea adsorption, or oxidation. The aim of the current review is to identify the amount of the most prevalent chemicals being removed during a single dialysis session and evaluate the potential benefits of an urea-selective membrane for portable dialysis.

METHODS

We have performed a literature search using Web of Science and PubMed databases to find available articles reporting (or be able to calculate from blood plasma concentration) > 5 mg of individually quantified solutes removed during thrice-weekly hemodialysis sessions. If multiple reports of the same solute were available, the reported values were averaged, and the geometric mean of standard deviations was taken. Further critical literature analysis of reported dialysate regeneration methods was performed using Web of Science and PubMed databases.

RESULTS

On average, 46.0 g uremic retention solutes are removed in a single conventional dialysis session, out of which urea is only 23.6 g. For both urease- and sorbent-based urea removal mechanisms, amino acids, with 7.7 g removal per session, could potentially interfere with urea removal efficiency. Additionally for the oxidation-based urea removal system, plentiful nutrients such as glucose (24.0 g) will interfere with urea removal by competition. Using a nanofiltration membrane between dialysate and oxidation unit with a molecular weight cutoff (MWCO) of ~200 Da, 67.6 g of non-electrolyte species will be removed in a single dialysis session, out of which 44.0 g are non-urea molecules. If the membrane MWCO is further decreased to 120 Da, the mass of non-electrolyte non-urea species will drop to 9.3 g. Reverse osmosis membranes have been shown to be both effective at blocking the transport of non-urea species (creatinine for example with ~90% rejection ratio), and permissive for urea transport (~20% rejection ratio), making them a promising urea selective membrane to increase the efficiency of the oxidative urea removal system.

CONCLUSIONS

Compiled are quantified solute removal amounts greater than 5 mg per session during conventional hemodialysis treatments, to act as a guide for portable dialysis system design. Analysis shows that multiple chemical species in the dialysate interfere with all proposed portable urea removal systems. This suggests the need for an additional protective dialysate loop coupled to urea removal system and an urea-selective membrane.

Novel synthesis methods and applications of MXene-based nanomaterials (MBNs) for hazardous pollutants degradation: Future perspectives

MXenes are a quickly growing and extended group of two-dimensional (2D) substances that have earned unbelievable analysis credits for various application areas within different manufacturing areas. Due to novel essential architectural and physicochemical properties shows good properties, such as elevated exterior area, living adaptability, strong electrochemistry, and great hydrophilicity. Given the fast progress within the structure and synthesis of MBNs for water treatment, quick updates on this research field are required to remove toxic substances, such as production approaches and characterization methods for the advantages and constraints of MXenes for pollutant degradation. MXenes are determined as a proposed road toward atmosphere-clean-up machinery to identify and decrease a pattern of hazardous resistant pollutants from environmental forms. Here, in this review article, we have been focused on describing the overview, novel synthesis methods, and characteristics of the MXene-based nanomaterials (MBNs) in the field for removing hazardous contaminants from environmental conditions. In the last, the utilizations of MBNs in water sanitization, organic solvent filtration, antibiotics degradation, pesticide degradation, heavy metals degradation, ions removal, bacterial pathogens degradation, along with the conclusion, challenges, and prospects in this field, have been discussed.

Advanced Nickel-Based Catalysts for Urea Oxidation Reaction: Challenges and Developments

The electrochemical urea oxidation reaction (UOR) is crucial for determining industrial and commercial applications of urea-based energy conversion devices. However, the performance of UOR is limited by the dynamic complex of the six-electron transfer process. To this end, it is essential to develop efficient UOR catalysts. Nickel-based materials have been extensively investigated owing to their high activity, easy modification, stable properties, and cheap and abundant reserves. Various material designs and strategies have been investigated in producing highly efficient UOR catalysts including alloying, doping, heterostructure construction, defect engineering, micro functionalization, conductivity modulation, etc. It is essential to promptly review the progress in this field to significantly inspire subsequent studies. In this review, we summarized a comprehensive investigation of the mechanisms of oxidation or poisoning and UOR processes on nickel-based catalysts as well as different approaches to prepare highly active catalysts. Moreover, challenges and prospects for future developments associated with issues of UOR in urea-based energy conversion applications were also discussed.