Exciton-Plasmon Interaction between AuNPs/Graphene Nanohybrids and CdS Quantum Dots/TiO2 for Photoelectrochemical Aptasensing of Prostate-Specific Antigen

Sensitive Electrochemical Immunosensor for Procymidone Detection Based on a Supramolecular Amplification Strategy

A sensitive electrochemical immunosensor for procymidone detection was developed based on a supramolecular amplification strategy. β-Cyclodextrin (β-CD)-based nanomaterials were employed to immobilize ferrocene derivative (FC)-functionalized antibodies/antigens through host-guest interactions. With the presence of procymidone, the formed β-CD-labeled bioconjugates were immobilized on the antibody-modified electrode after the immunoreaction, indicating fabrication of the immunosensor. The FC/β-CD complexes were with multiplex electroactive species and provided more sites for recognition groups, resulting in signal amplification of the sensor. Monitored with differential pulse voltammetry, the proposed immunosensor exhibited a wide linear range from 5 pM to 0.1 μM with a low detection limit (LOD) of 1.67 pM. The as-prepared immunosensor possessed high sensitivity, specificity, and stability and showed great potential for monitoring procymidone in the field of food safety.

A dual-switch electrochemical aptasensor for label-free detection of thrombin and ATP based on split aptamers

BACKGROUND

Aptamers, consisting of specialized single-stranded nucleic acids, are engineered through the SELEX technique to recognize specific targets with strong affinity. Aptamers are exceptionally useful in various sensor technologies, such as fluorescence-based sensors, electrochemical sensors, and colorimetric detection systems. Due to its high sensitivity, specificity and fast response, electrochemical aptasensor shows great application prospects in analytical detection, food safety, and environmental monitoring. However, one aptasensor can usually detect only one type of target, limiting its universality in practical applications.

RESULTS

Here, we constructed a dual-switch and label-free electrochemical aptasensor based on split aptamer and nuclease. The feasibility, specificity, and sensitivity of the aptasensor were investigated by using thrombin and adenosine triphosphate (ATP) as targets. Split aptamer can not only capture target specifically but also form a stable sandwich structure with the target. In the presence of thrombin, it triggered a hydrolysis reaction of exonuclease I, leading to a decrease in the impedance signal. Differently, the presence of ATP could form a sandwich structure with split aptamers, leading to an increase in output signals. The aptasensor achieved sensitive and specific detection of thrombin and ATP, with low detection limits of 0.76 pM and 0.27 pM, respectively.

SIGNIFICANCE AND NOVELTY

The aptasensor realized the detection of two targets without replacing any reagents or equipment, which greatly saved time and cost. Furthermore, electrochemical impedance spectroscopy (EIS) uses impedance as an output signal, showing great application prospects in electrochemical aptasensors as label-free and simple methods. Because of its simplicity, label-free, and sensitivity in complex samples, the split aptamer-assisted aptasensor provides new ideas and methods in early diagnosis of diseases.

Novel Electrochemical Approaches for Anticancer Drug Monitoring: Application of CoS@Nitrogen-Doped Amorphous Porous Carbon Composite in Nilotinib Detection

A novel composite containing CoS and nitrogen-doped amorphous porous carbon (NAPC), denoted as CoS@NAPC, was successfully synthesized from a mixture of cobalt-based ZIF-12 and sulfur through one-pot pyrolysis. The morphology and microstructure of the composites are evaluated with appropriate spectroscopic techniques. CoS@NAPC was used to modify the glassy carbon electrode (GCE) to detect Nilotinib. Under optimized conditions, the GCE electrode modified with CoS@NAPC showed a low limit of detection (LOD) of 11.8 ng/mL and two wide linear concentration ranges of 59.7-1570 and 1570-11200 ng/mL for the determination of Nilotinib. GCE electrode modified with CoS@NAPC has excellent recoveries ranging from 98.41 to 102.03% for real samples, demonstrating its superior analytical performance. The enhanced performance of CoS@NAPC as an electrochemical sensor may stem from the combined action of two key components: CoS, known for its potent reactivity toward Nilotinib, and NAPC, which offers a consistent conductive carbon matrix. CoS contributes to its reactivity, while NAPC facilitates electron transfer during Nilotinib detection. This synergistic effect likely underlies the superior sensor performance observed.

Tailoring DNA Surface Interactions on Single-Layer Graphene: Comparative Analysis of Pyrene, Acridine, and Fluorenyl Methyl Linkers

This study investigates the effect of different linkers and solvents on the immobilization of DNA probes on graphene surfaces, which are crucial for developing high-performance biosensors. Quartz crystal microbalance with dissipation (QCM-D) measurements were used to characterize in situ and real-time the immobilization of ssDNA and hybridization efficiency on model graphene surfaces. The DNA probes immobilization kinetics and thermodynamics were systematically investigated for all the pairings between three bifunctional linkers─1-pyrenebutyric acid succinimidyl ester (PBSE), Fluorenylmethylsuccinimidyl carbonate (FSC), and Acridine Orange (AO) succinimidyl ester─and three organic solvents (DMF, DMSO, and 10% DMF/ethanol). The linker's spatial orientation and effective surface modification for DNA probe attachment were also evaluated based on footprints and DNA probe surface coverage. Graphene surfaces functionalized with PBSE in DMF achieved the highest DNA probe surface density (up to 1.31 × 1013 molecules cm-2) and fastest kinetic, p values above 4, and hybridization efficiencies of at least 70%, with 20 to 30% of ssDNA directly adsorbed nonspecifically on the functionalized graphene surface, which has significant implications for the design of sensitive biosensors. The efficiency of the ethanolamine-NHS blocking reaction was estimated to be 80%. The surface packing density of the linker was estimated at 25% of the entire surface coverage for PBSE, and about 22 and 13% for AO and FSC, respectively. Overall, the surface coverage achieved for probe DNA was in the same order of magnitude as that obtained on flat gold surfaces (≥1013 molecules cm-2), typically used in biosensors. These findings highlight the importance of the selected conditions for graphene surface modification to achieve high DNA probe surface density on graphene materials. These results underscore the critical role of interface engineering in achieving target functional outcomes in biosensing technology.

Monospecific, ultrasensitive, and quantitative lateral flow immunoassay for dibutyl phthalate via epitopes rational design strategies

Due to the characteristics of long-term persistence, leading to extensive temporal and spatial distribution of the environmental pollutant dibutyl phthalate (DBP), analyzing of a large number of food and environment samples over a long period and at a high frequency must be necessary. It is of great significance to construct a simple, rapid, sensitive and high-throughput immunoassay method. For the first time, 8 different DBP hapten molecules were designed using computer simulation to provide DBP epitope informations from both conformation and electrostatic aspects for the target molecule. This approach helped to establish a reasonable hapten design strategy while reducing the cost and increasing the success rate of producing the required high-specificity and high-sensitivity DBP antibodies. Hapten DBP-1 was proposed, and the effectiveness of computer-aided hapten DBP-1 design was further verified by mouse antiserum experiments. A highly-specific monoclonal antibody (mAb) against DBP with an IC50 value of 19.8 ng/mL was obtained by mAb screening with enhanced matrix effect. A colloidal gold immunochromatographic test strip (CIS) which can be used to detect DBP in environmental, food and human urine samples was further prepared, and the DBP content in positive samples such as water, soil, and liquor samples could be rapidly analyzed within 15 min, which were basically consistent with the data by Gas Chromatography-Mass Spectrometry (GC-MS). In summary, our study proposed a detection method that can be directly used to detect DBP in environmental water, soil, liquor and human urine samples, which is ready for application in environmental monitoring, food safety control and clinical use.

Proximity ligation-triggered DNAzyme for selective fluorescent aptasensing of methicillin-resistant Staphylococcus aureus

There is an urgent need for novel strategies to accurately and reliably detect pathogenic bacteria to address the global epidemic of antibiotic resistance. This study proposes an innovative approach combining dual aptamer-based target recognition and proximity ligation assay (PLA) triggered DNAzyme recycling cleavage. This method allows for the precise identification and reliable detection of methicillin-resistant Staphylococcus aureus (MRSA). The fluorescence probe labeled with a fluorophore is modified on gold nanoparticles (AuNPs), resulting in the quenching of the fluorescent signal by the AuNPs. The interaction between MRSA and two aptamers leads to forming a Mg2+-dependent DNAzyme. The DNAzyme cleaves the fluorescence probe, causing the fluorescent fragment to detach from the surface of the AuNPs, in which the quenched fluorescence signal in the fluorescence probe reappears. The DNAzyme-assisted cleavage and rebinding process generates a processive strolling along the surface track of AuNPs. Consequently, the fluorescence intensity experiences a substantial recovery. A strong linear correlation is observed between the fluorescence intensity and MRSA concentration within 50 cfu/mL to 106 cfu/mL. We believe that implementing the novel integrated strategy will broaden the range of bacterial detection methods in the battlefield environment and stimulate the creation of potential new drugs in the future.

An RNA aptamer photoelectrochemical biosensor based on the exciton energy transfer constructed for theophylline detection

A novel photoelectrochemical (PEC) biosensor was developed incorporating a specifically designed RNA aptamer for the detection of theophylline (TP). This involved utilizing two nucleotide base aptamers with tailored sequences designed to target TP. The 3' end of a single-stranded RNA sequence (5'-GGAUACCA-(CH2)6-SH-3') and the 5' end of a complementary stranded RNA sequence (5'-HS-(CH2)6-CCUUGGAAGCC-3') were linked to gold nanoparticles (AuNPs) and CdS quantum dots (QDs), respectively. These two single-stranded RNAs (ssRNA) formed a double-stranded RNA (dsRNA) capable of recognizing TP. This major structural change altered the spacing between QDs and NPs, which signaled the presence and concentration of TP. TP was photoelectrochemical catalytic oxidation by the hole of CdS QDs under illumination, then anode photocurrent was generated. Due to the increase in surface impedance and the effect of exciton energy transfer (EET) between QDs and AuNPs, the photocurrent would undergo varying degrees of change. TP was detected by changes in photocurrent. PEC detection of TP was achieved in the range of 0.1 μM-200 μM. The detection limit was 0.033 μM. The method exhibited commendable reproducibility and remarkable selectivity. The biosensor was used to measure TP content in tea, beverages and blood samples, resulting in satisfactory recovery rates.

Electrochemical sensor for vascular endothelial growth factor based on self-assembling DNA aptamer structure

Developing vascular endothelial growth factor (VEGF) protein is essential for early cancer diagnosis and cancer treatment monitoring. This study presents the design and characterisation of an electrochemical sensor utilising a self-assembling DNA aptamer structure for the sensitive and selective detection of VEGF. The aptamer structure comprises three different parts of single-stranded DNA that are assembled prior to integration into the sensor. Polypyrrole (Ppy)-based layers were deposited onto screen-printed carbon electrodes (SPCEs) using an electrochemical deposition technique, followed by the entrapment of a self-assembled DNA aptamer structure within electrochemically formed Ppy matrix ((DNA aptamer)/Ppy). The response to the sensor toward VEGF was measured by the pulsed amperometric detection (PAD), highlighting the enhanced performance of DNA aptamer/Ppy configuration compared to bare Ppy. The sensor exhibited high sensitivity, achieving a limit of detection (LOD) of 0.21 nM for VEGF. The interaction behaviour between VEGF in the solution and the immobilise DNA aptamer/Ppy-based structure was analysed using Langmuir isotherm model. The developed electrochemical biosensor is promising for in vitro applications in early cancer diagnostics and treatment monitoring, enabling rapid screening of patient samples.

Metal-to-particle charge transfer invoked photoelectrochemistry on ferroelectric SrTiO3 for split-mode and high-throughput aptasensing

Split-mode aptasensing is highly desirable in photoelectrochemistry because of its distinctive advantages of high-throughput, avoided damage to biomolecules, and increased sensitivity and selectivity. However, the currently available photoelectrochemical (PEC) strategy conducible to split-mode aptasensing is still limited to the bioreaction mediated generation of photoactive species, in which a low photocurrent was usually attained, rending this strategy impotent for attaining high sensitivity. As a result, to explore new strategies that are amendable to highly efficient, split-mode PEC aptasensing are still challenging but demanding. Herein, ferrocyanide mediated metal-to-particle charge transition (MPCT) on ferroelectric strontium titanate (SrTiO3) was explored as an innovative signal transduction strategy and was validated for high-performance aptasensing. By taking the 17β-Estradiol (E2) as a model analyte, the recognition between the target (E2) and its aptamer anchored on the Fe3O4@Au (named as Fe3O4@Au/Apt) destroyed the beforehand formed assembly between the Fe3O4@Au/Apt and the ssDNA labeled liposome encapsulated with [Fe(CN)6]4- (named as DLL-FeCN), which resulted in the release of the beforehand encapsulated [Fe(CN)6]4- into solution. The released [Fe(CN)6]4- then coordinated onto the surface of SrTiO3 nanoparticles consisted photoelectrode, forming the MPCT process from metal ion (iron (II) in [Fe(CN)6]4-) to the conduction band (CB) of SrTiO3 for anodic photocurrent signal output. The detection achieved linear range of 1.0 pM-100 nM, with a detection limit of 0.3 pM for E2. Benefiting from the cooperative effects of the MPCT process and the ferroelectric polarization in bulk SrTiO3 for achieving highly efficient photocurrent generation capability, the developed split-type detection had the advantage of high sensitivity/selectivity and high throughput. This work not only opens up the MPCT process for innovative PEC sensing strategy but also blazes a new road for high performance PEC aptasensing.

A high-performance electrochemical sensor based on dendritic Au/Zn modified carbon cloth for the determination of nitrite in aquaculture

Nitrite is a common nitrogen-containing compound that possesses high biological toxicity, thereby posing a serious threat to aquatic organisms. Therefore, it is imperative to develop a rapid and quantitative determination approach for nitrite. In this study, the aim was to prepare a novel electrochemical sensor to determine nitrite. This was achieved by synthesizing Au/Zn dendritic complexes on a carbon cloth self-supported electrode after plasma treated by a stepwise strategy of electrodeposition and in-situ corrosion. In accordance with the optimal experimental conditions, the electrode exhibited remarkable catalytic activity for the electrooxidation of nitrite ions (pH = 8.0), accompanied by a considerable enhancement in peak anodic current in comparison to the unmodified electrode. The sensor exhibited a wide linear range (1-833 μM, 833-8330 μM), high sensitivity (3506 μA mM-1 cm-2, 538 μA mM-1 cm-2), a low detection limit (0.43 μM), and excellent selectivity, reproducibility, and stability for the determination of nitrite. Furthermore, the prepared sensor was successfully applied to the detection of nitrite in tap water, fish holding pond water and duck pond water, demonstrating good recovery and no significant difference from the spectrophotometric results. The results suggest that the electrochemical sensor developed in this study represents a straightforward yet efficacious approach to the development of advanced portable sensors for aquaculture applications.

Quantitative Detection of the CP4-EPSPS Protein in Genetically Modified Soybeans Using a Novel Fluorescence Immunoassay Assay

Protein-based detection methods, enzyme-linked immunosorbent assays (ELISAs) and lateral flow strips, have been widely used for rapid, specific, and sensitive detection of genetically modified organisms (GMOs). However, the traditional ELISA method for the quantitative detection of GMOs has certain limitations. Herein, a quantum dot (QD)-based fluorescence-linked immunosorbent assay was developed using QDs as fluorescent markers for the detection of glyphosate-resistant protein (CP4-EPSPS) in the MON89788 soybean. The end-point fluorescent detection system was carried out using QDs conjugated with a goat anti-rabbit secondary antibody. Compared with the conventional sandwich ELISA method, the newly developed fluorescence-linked immunosorbent assay was highly sensitive and accurate for detecting the CP4-EPSPS protein. The quantified linearity was achieved in the range of 0.05-5% (w/w) for the MON89788 soybean sample. The recovery of protein extracted from mixed MON89788 soybean samples ranged from 87.67% to 116.83%. The limits of detection and limits of quantification were 0.7101 and 2.152 pg/mL, respectively. All of the results indicated that the QD-based fluorescence-linked immunosorbent assay was a highly specific and sensitive method for monitoring the CP4-EPSPS protein in GMOs.

Simultaneous detection of multiple mycotoxins in agricultural products: Recent advances in optical and electrochemical sensing methods

Mycotoxin contamination poses serious threats to human and animal health. Food and environmental systems are often simultaneously contaminated with multiple mycotoxins, a problem that is further exacerbated by the synergistic toxicological effects of these co-occurring mycotoxins. Consequently, the development of rapid detection methods capable of simultaneously identifying multiple mycotoxins in agricultural products is essential to prevent their entry into the food chain. Compared to standard detection methods, optical and electrochemical (EC) sensing methods have distinct advantages for the rapid detection of mycotoxins. This review comprehensively summarizes the latest advancements in the field of simultaneous detection of multiple mycotoxins using optical and EC sensing methods over the last 6 years (2018-2024). First, the review introduces the classification and relevant principles of optical and EC sensing methods. Thereafter, it emphasizes innovative simultaneous detection strategies within these approaches. Finally, it discusses current challenges and offers a reference for further research. Currently, the main challenge lies in the mutual interference among targets, making the development of an interference-free detection platform essential. Furthermore, the ongoing development of integrated technology is expected to aid regulatory authorities in improving the quality of agricultural products for field applications.

Mycotoxin Detection through Colorimetric Immunoprobing with Gold Nanoparticle Antibody Conjugates

Driven by their exceptional optical characteristics, robust chemical stability, and facile bioconjugation, gold nanoparticles (AuNPs) have emerged as a preferred material for detection and biosensing applications in scientific research. This study involves the development of a simple, rapid, and cost-effective colorimetric immuno-sensing probe to detect aflatoxin B1 and zearalenone using AuNP antibody (AuNP-mAb) conjugates. Anti-toxin antibodies were attached to the AuNPs by using the physical adsorption method. The colorimetric immunosensor developed operates on the principle that the optical properties of the AuNP are very sensitive to aggregation, which can be induced by a critical high salt concentration. Although the presence of antibodies on the AuNP surface inhibits the aggregation, these antibodies bind to the toxin with higher affinity, which leads to exposure of the surface of AuNPs and aggregation in a salt environment. The aggregation triggers a noticeable but variable alteration in color from red to purple and blueish gray, as a result of a red shift in the surface plasmon resonance band of the AuNPs. The extent of the shift is dependent on the toxin exposure dose and can be quantified using a calibration curve through UV-Visible-NIR spectroscopy. The limit of detection using this assay was determined to be as low as 0.15 ng/mL for both zearalenone and aflatoxin B1. The specificity of the prepared immunoprobe was analyzed for a particular mycotoxin in the presence of other mycotoxins. The developed immunoprobe was evaluated for real-world applicability using artificially spiked samples. This colorimetric immunoprobe based on localized surface plasmon resonance (LSPR) has a reduced detection limit compared to other immunoassays, a rapid readout, low cost, and facile fabrication.

Ultrasensitive monitoring of PCB77 in environmental samples using a visible-driven photoelectrochemical sensing platform coupling with exonuclease I assisted in target recycling

Due to the urgent need for detecting trace amounts of 3,3',4,4'-tetrachlorobiphenyl (PCB77) in the environment, we have developed an efficient and visible-driven photoelectrochemical (PEC) sensing platform based on carbon quantum dots (CQDs) modified titanium dioxide nanorods (TiO2 NRs), coupling with exonuclease I (Exo I) assisted in target recycling for significant signal amplification. CQDs/TiO2 NRs with high visible-light absorption ability and electron-hole separation efficiency is used as photoactive substrate for anchoring anti-PCB77 aptamer and its complementary DNA (cDNA). With the addition of PCB77, the specific interaction between PCB77 and its aptamer forces aptamer to separate from the electrode surface, resulting in an increase in photocurrent density. Adding Exo I in the test system, a self-catalytic target cycle was motivated, which significantly increased the PEC signal by more than twice, achieving signal amplification. The relationship between the photocurrent density changes and the concentrations of PCB77 are utilized to achieve quantitative detection of PCB77. The designed PEC sensing platform has good analytical performance with a detection limit as low as 0.33 pg L-1, high selectivity and stability. Moreover, the PEC sensor is successfully used to evaluate the content of PBC77 in the environment samples. The established sensing platform provides a simple and efficient method for detecting trace amounts of PCB77 in the environment.

Functional inorganic nanoparticles in cancer: Biomarker detection, imaging, and therapy

Cancer poses a major global public health challenge. Developing more effective early diagnosis methods and efficient treatment techniques is crucial to enhance early detection sensitivity and treatment outcomes. Nanomaterials offer sensitive, accurate, rapid, and straightforward approaches for cancer detection, diagnosis, and treatment. Inorganic nanoparticles are widely used in medicine because of their high stability, large specific surface area, unique surface properties, and unique quantum size effects. Functional inorganic nanoparticles involve modifying inorganic nanoparticles to enhance their physical properties, enrichment capabilities, and drug-loading efficiency and to minimize toxicity. This Review provides an overview of various types of inorganic nanoparticles and their functionalization characteristics. We then discuss the progress of functional inorganic nanoparticles in cancer biomarker detection and imaging. Furthermore, we discuss the application of functional inorganic nanoparticles in radiotherapy, chemotherapy, gene therapy, immunotherapy, photothermal therapy, photodynamic therapy, sonodynamic therapy, and combination therapy, highlighting their characteristics and advantages. Finally, the toxicity and potential challenges of functional inorganic nanoparticles are analyzed. The purpose of this Review is to explore the application of functional inorganic nanoparticles in diagnosing and treating cancers, while also presenting a new avenue for cancer diagnosis and treatment.

Target-Triggered Multiple-Polarity-Switchable Multiplexed Photoelectrochemical Platform

Convenient and accurate quantification of disease-relevant multitargets is essential for community disease screening. However, in the field of photoelectrochemical (PEC) sensors for multisubstance detection, research on the continuous detection of multiple targets using a polarity-switching mode is scarce. In this study, a multiplexed PEC bioassay was developed based on a target-triggered "anodic-cathodic-anodic" multiple-polarity-switchable mode. Employing miRNA-21 and miRNA-141 as model analytes, the photosensitive material combinations of Cu2O/gold nanoparticles (AuNPs)/TiO2 and CdS/AuNPs/TiO2 were successively formed through the specific binding of different whisker branches of Whisker-DNA to Cu2O-H1 and the CdS-tripod DNA ring, respectively. This process reverses the photocurrent polarity from anodic to cathodic and then back to anodic upon detecting different targets, resulting in the high-sensitivity quantification of various biological targets with reduced interference. To enhance the device's utility and affordability in community disease screening, integrating a capacitor and a multimeter-smartphone connection simplifies the assembly and reduces costs. In developing the PEC sensor, the device demonstrated linear detection ranges for miRNA-21 and miRNA-141 from 0.01 fM to 10 nM. Detection limits for miRNA-21 and miRNA-141 were established at 3.2 and 4.3 aM, respectively. The innovative target-triggered multiple-polarity-switchable mode offers adaptability for other multitarget detections by simply modifying the structure of the whisker branches and the combination of photosensitive materials.

CRISPR-Driven Biosensors: A New Frontier in Rapid and Accurate Disease Detection

This comprehensive review delves into the advancements and challenges in biosensing, with a strong emphasis on the transformative potential of CRISPR technology for early and rapid detection of infectious diseases. It underscores the versatility of CRISPR/Cas systems, highlighting their ability to detect both nucleic acids and non-nucleic acid targets, and their seamless integration with isothermal amplification techniques. The review provides a thorough examination of the latest developments in CRISPR-based biosensors, detailing the unique properties of CRISPR systems, such as their high specificity and programmability, which make them particularly effective for detecting disease-associated nucleic acids. While the review focuses on nucleic acid detection due to its critical role in diagnosing infectious diseases, it also explores the broader applications of CRISPR technology in detecting non-nucleic acid targets, thereby acknowledging the technology's broader potential. Additionally, the review identifies existing challenges, such as the need for improved signal amplification and real-world applicability, and offers future perspectives aimed at overcoming these hurdles. The ultimate goal is to advance the development of highly sensitive and specific CRISPR-based biosensors that can be used widely for improving human health, particularly in point-of-care settings and resource-limited environments.

DNA/RNA-based electrochemical nanobiosensors for early detection of cancers

Nucleic acids, like DNA and RNA, serve as versatile recognition elements in electrochemical biosensors, demonstrating notable efficacy in detecting various cancer biomarkers with high sensitivity and selectivity. These biosensors offer advantages such as cost-effectiveness, rapid response, ease of operation, and minimal sample preparation. This review provides a comprehensive overview of recent developments in nucleic acid-based electrochemical biosensors for cancer diagnosis, comparing them with antibody-based counterparts. Specific examples targeting key cancer biomarkers, including prostate-specific antigen, microRNA-21, and carcinoembryonic antigen, are highlighted. The discussion delves into challenges and limitations, encompassing stability, reproducibility, interference, and standardization issues. The review suggests future research directions, exploring new nucleic acid recognition elements, innovative transducer materials and designs, novel signal amplification strategies, and integration with microfluidic devices or portable instruments. Evaluating these biosensors in clinical settings using actual samples from cancer patients or healthy donors is emphasized. These sensors are sensitive and specific at detecting non-communicable and communicable disease biomarkers. DNA and RNA's self-assembly, programmability, catalytic activity, and dynamic behavior enable adaptable sensing platforms. They can increase biosensor biocompatibility, stability, signal transduction, and amplification with nanomaterials. In conclusion, nucleic acids-based electrochemical biosensors hold significant potential to enhance cancer detection and treatment through early and accurate diagnosis.

In vitro identification of single-stranded DNA aptamers targeting human IL-23 using the protein-SELEX strategy

Interleukin (IL)-23 inhibitor monoclonal antibodies shown significant efficacy in treating autoimmune diseases. DNA or RNA aptamers exhibit comparable specificity to antibodies, are cost-effective, non-immunogenic, and do not have batch to batch variation. This study aimed to characterize a single-stranded DNA (ssDNA) aptamer targeting human IL-23. The alpha subunit of IL-23 (P19) and intact IL-23 were cloned, expressed, and the proteins finally were purified through Ni2+-iminodiacetic acid affinity chromatography. The selection and characterization of ssDNA aptamer against P19 were conducted using the protein-systematic evolution of ligands by exponential enrichment (SELEX). Dot blot assay was carried out to monitor binding of the aptamer output of SELEX rounds, to P19 protein. The dissociation constant (Kd) of aptamers with positive results in dot blot assay, determined based on their binding to IL-23 using an ELISA method. Recombinant P19 and IL-23 proteins were 26 and 72 kDa, respectively, observed on SDS-PAGE .12 %. The aptamers output from 7, 8, 9, 10, 11, and 12 rounds of the SELEX was monitored by dot blot assay, revealing that the aptamer from the round 8 has stronger luminescent signal and was selected for TA-cloning. After analyzing the biotinylated aptamers from clones, positive clones in dot blot assay and ELISA were sequenced. Finally, the Kd calculation revealed three aptamers with high affinity, named A23P3, A23P6, and A23P15 with Kd values of 1.37, 2.139, and 2.88 nM, respectively. Results of this study introduced three specific anti-IL-23 ssDNA aptamers with high affinity, which could be utilized for therapeutic and diagnostic purposes.

Light-Driven Electrochemical Biosensing with DNA Origami-Assisted Hybrid Nanoantenna for Fumonisin B1 Monitoring

The electrochemical detection of biosensors is largely governed by the changes in physical properties of redox probes, which are susceptible to electrode substrate effects, inhibiting sensor sensitivity. In this work, a light-driven electrochemical biosensor based on a hybrid nanoantenna was developed for the sensitive detection of fumonisin B1 (FB1). The hybrid nanoantenna sensing interface was constructed by coupling CdSe quantum dots (QDs)-DNA nanowire and graphdiyne oxide composites loaded with methylene blue and gold nanorods (GDYO-MB-Au NRs) using a tetrahedral DNA nanostructure, which acted as a light-driven unit and an amplification unit, respectively. The hybrid nanoantenna with light-driven properties facilitated the alteration in the chemical properties of MB at the sensing interface; that is, MB was degraded under light illumination. The stripping of the CdSe QDs-DNA nanowire triggered by the binding of FB1 could degrade the light-driven capability, thereby improving the electrochemical signal through depressing MB degradation. Taking advantage of the photodegradation of MB by the hybrid nanoantenna, the developed biosensor reduced the background signal and increased the detection sensitivity. The developed biosensor exhibited a linear detection range from 0.5 fg mL-1 to 10 pg mL-1 and a detection limit down to 0.45 fg mL-1. This strategy shows great promise for the fabrication of highly sensitive electrochemical biosensors.

A label-free H1N1 influenza virus immunosensor based on an N-LIG/Au laser induced graphene microelectrode

A label-free immunosensor based on an N-doped laser direct graphene (N-LIG)/Au electrode was proposed for H1N1 influenza virus detection. By utilizing the instantaneous high temperature of laser irradiation, N atoms are generated by the decomposition of melamine dripped onto the surface of an LIG electrode to obtain N-LIG with higher conductivity. The doping of N atoms provides a large number of active sites for LIG microelectrodes. Combined with the electrodeposition of Au NPs, and covalently crosslinking antibodies, a simple, highly sensitive and stable immunosensing interface is constructed. The proposed H1N1 influenza virus immunosensor has a detection range of 0.01 fg mL-1 to 10 ng mL-1 with a detection limit as low as 0.004 fg mL-1. The constructed sensor has ultra-high sensitivity and good selectivity and can be used for complex biological sample analysis, with potential application prospects in preventing the large-scale spread of influenza. Taking advantage of N-LIG electrode's properties will provide opportunities for developing portable electrochemical biosensors for health and environmental applications.

Host-Guest Interaction Mediated Perovskite@Metal-Organic Framework Z-Scheme Heterojunction Enabled Paper-Based Photoelectrochemical Sensing

Exploring the high-performance photoelectronic properties of perovskite quantum dots (QDs) is desirable for paper-based photoelectrochemical (PEC) sensing;however, challenges remain in improving their stability and fundamental performance. Herein, a novel Z-scheme heterostructure with host-guest interaction by the confinement of CH3NH3PbBr3 QDs within Cu3(BTC)2 metal-organic framework (MOF) crystal (MAPbBr3@Cu3(BTC)2) is successfully constructed on the paper-based PEC device for ultrasensitive detection of Ochratoxin A (OTA), with the assistance of the exciton-plasmon interaction (EPI) effect. The host-guest interaction is estabilished by encapsulating MAPbBr3 QDs as guests within Cu3(BTC)2 MOF as a host, which prevents MAPbBr3 QDs from being damaged in the polar system, offering access to long-term stability with high-performance PEC properties. Benefiting from the precise alignment of energy levels, the photogenerated charge carriers can migrate according to the Z-scheme charge-transfer pathway under the driving force of the internal electric field, achieving a high photoelectric conversion efficiency. Upon OTA recognition, the EPI effect is activated to modulate the exciton response in MAPbBr3 QDs by accelerating radiative decay, finally achieving sensitive OTA sensing with a detection limit of 0.017 pg mL-1. We believe this work renders new insight into designing host-guest Z-scheme heterojunctions in constructing the paper-based PEC sensing platforms for environmental monitoring.

Ultrasensitive Photoelectrochemical Biosensor for Dual-miRNAs Detection Based on Molecular Logic Gates and Methylene Blue Sensitized ZnO@CdS@Au Nanorods

The occurrence of cancer is often closely related to multiple tumor markers, so it is important to develop multitarget detection methods. By the proper design of the input signals and logical operations of DNA logic gates, detection and diagnosis of cancer at different stages can be achieved. For example, in the early stages, specific input signals can be designed to correspond to early specific tumor markers, thereby achieving early cancer detection. In the late stage, logic gates for multitarget detection can be designed to simultaneously detect multiple biomarkers to improve diagnostic accuracy and comprehensiveness. In this work, we constructed a dual-target-triggered DNA logic gate for anchoring DNA tetrahedra, where methylene blue was embedded in the DNA tetrahedra to sensitize ZnO@CdS@Au, achieving ultrasensitive detection of the target substance. We tested the response of AND and OR logic gates to the platform. For AND logic gates, the sensing platform only responds when both miRNAs are present. In the concentration range of 10 aM to 10 nM, the photoelectric signal gradually increases with an increase of the target concentration. Subsequently, we used OR logic gates for miRNA detection. Even if only one target exists, the sensing platform exhibits excellent performance. Similarly, within the concentration range of 10 aM to 10 nM, the photoelectric signal gradually increases with an increase of the target concentration. The minimum detection limit is 1.10 aM. Whether it is the need to detect multiple targets simultaneously or only one of them, we can achieve it by selecting the appropriate logic gate. This strategy holds promising application prospects in fields such as biosensing, medical diagnosis, and environmental monitoring.

Integrated Photoelectrochemical-SERS Platform Based on Plasmonic Metal-Semiconductor Heterostructures for Multidimensional Charge Transfer Analysis and Enhanced Patulin Detection

Comprehending the charge transfer mechanism at the semiconductor interfaces is crucial for enhancing the electronic and optical performance of sensing devices. Yet, relying solely on single signal acquisition methods at the interface hinders a comprehensive understanding of the charge transfer under optical excitation. Herein, we present an integrated photoelectrochemical surface-enhanced Raman spectroscopy (PEC-SERS) platform based on quantum dots/metal-organic framework (CdTe/Yb-TCPP) nanocomposites for investigating the charge transfer mechanism under photoexcitation in multiple dimensions. This integrated platform allows simultaneous PEC and SERS measurements with a 532 nm laser. The obtained photocurrent and Raman spectra of the CdTe/Yb-TCPP nanocomposites are simultaneously influenced by variable bias voltages, and the correlation between them enables us to predict the charge transfer pathway. Moreover, we integrate gold nanorods (Au NRs) into the PEC-SERS system by using magnetic separation and DNA biometrics to construct a biosensor for patulin detection. This biosensor demonstrates the voltage-driven ON/OFF switching of PEC and SERS signals, a phenomenon attributed to the plasmon resonance effect of Au NRs at different voltages, thereby influencing charge transfer. The detection of patulin in apples verified the applicability of the biosensor. The study offers an efficient approach to understanding semiconductor-metal interfaces and presents a new avenue for designing high-performance biosensors.

A fluorescence-electrochemical dual-mode aptasensor based on novel DNA-dependent PBNFs@PtPd for highly selective and sensitive detection of procymidone through hybridization chain reaction

Herein, a study for the first application of a hybridization chain reaction, a 1,8-naphthalimides-DNA (NDs) intercalator, and DNA-dependent Prussian blue nanoflowers@PtPd materials (PBNFs@PtPd) in the development of a fluorescence-electrochemical (FL-EC) aptasensor. This construction establishes an efficient sensing platform for the detection of procymidone (PCM). In the context of the described experiment, dual-mode detection is achieved through the generation of FL signals by an aptamer labeled with a Cy5 moiety and the formation of DPV signals by the modification of a thionine-appended 1,8-naphthalimide (Thi-NDs). In the presence of PCM, specific recognition occurs, followed by the utilization of magnetic separation technology to release DNA1 (S1) and aptamer-Cy5 (Apt-Cy5), subsequently introducing them onto both fluorescence and EC platforms. The presence of S1 effectively activates hybridization chain reaction (HCR) for the electrode surface, thereby significantly increasing the binding sites for Thi-NDs and consequently greatly amplifying the response signal of differential pulse voltammetry (DPV). The developed FL-EC dual-mode sensing platform demonstrates high sensitivity in the detection of PCM, with the detection limits of 0.173 μg·ml-1 (within the detection range of 500 pg·ml-1 to 500 ng·ml-1) and 0.074 ng·ml-1 (within the detection range of 100 pg·ml-1 to 100 ng·ml-1), respectively. The designed dual-mode sensor exhibits notable characteristics, including high selectivity, reproducibility, synergy, and reliable monitoring/capability for PCM in real samples.

High-Throughput Multitarget Molecular Detection in an Automatic Light-Addressable Photoelectrochemical Sensing Platform

Successively emerged high-throughput multitarget molecular detection methods bring significant development tides in chemical, biological, and environmental fields. However, several persistent challenges of intricate sample preparation, expensive instruments, and tedious and skilled operations still need to be further addressed. Here, we propose an automatic light-addressable photoelectrochemical (ALA-PEC) sensing platform for sensitive and selective detection of multitarget molecules. With Au nanoparticle-decorated TiO2 nanotube photonic crystals (Au-TiO2 NTPCs) as a photoelectrode and 8 kinds of antibiotics as target molecules, the ALA-PEC sensing system implements automatic detection of multimolecules in a short time with high sensitivity and good selectivity. Random samples with different amounts of antibiotics have been well-distinguished in the ALA-PEC system, and both the chemical components and concentrations have been well-illustrated in a pattern recognition model. It is worth noting that 8 samples are not the limit of the ALA-PEC sensing platform, which can be easily expanded to more complex detection arrays based on practical needs. The emerging ALA-PEC sensing platform provides a new solution for rapid screening and detection of multitarget and high-throughput substances and potentially brings the automatic, portable, sensitive, high-throughput, and cost-effective detection technique to an entire new realm.

A novel photoelectrochemical self-screening aptamer biosensor based on CAU-17-derived Bi2WO6/Bi2S3 for rapid detection of quorum sensing signal molecules

Quorum sensing signal molecule is an important biomarker released by some microorganisms, which can regulate the adhesion and aggregation of marine microorganisms on the surface of engineering facilities. Thus, it is significant to exploit a convenient method that can effectively monitor the formation and development of marine biofouling. In this work, an advanced photoelectrochemical (PEC) aptamer biosensing platform was established and firstly applied for the rapid and ultrasensitive determination of N-(3-Oxodecanoyl)-l-homoserine lactone (3-O-C10-HL) released from marine fouling microorganism Ponticoccus sp. PD-2. The visible-light-driven Bi2WO6/Bi2S3 heterojunction derived from metal-organic frameworks (MOFs) CAU-17 and self-screened aptamer were employed as the photoactive materials and bioidentification elements, respectively. Appropriate amount of MoS2 quantum dots (QDs) conjugated with single-stranded DNA were introduced by hybridization to enhance the photocurrent response of the PEC biosensor. The self-screening aptamer can specifically recognize 3-O-C10-HL, accompanied by increasing the steric hindrance and forcing MoS2 QDs to leave the electrode surface, resulting in an obvious reduction of photocurrent and achieving a dual-inhibition signal amplification effect. Under the optimized conditions, the photocurrent response of PEC aptasensor was linear with 3-O-C10-HL concentration from 1 nM to 10 μM, and the detection limit was as low as 0.26 nM. The detection strategy also showed a high reproducibility, superior specificity and good stability. This work not only provides a simple, rapid and ultrasensitive PEC aptamer biosensing strategy for monitoring quorum sensing signal molecules in marine biofouling, but also broadens the application of MOFs-based heterojunctions in PEC sensors.

Energy difference-driven ROS reduction for electrochemical tracking crop growth sensitized with electron-migration nanostructures

Aiming for sustainable crop productivity under changing climate conditions, it is essential to develop handy models for in-situ monitoring of reactive oxygen species (ROS). Herein, this work reports a simple electrochemical sensing toward hydrogen peroxide (H2O2) for tracking crop growth status sensitized with electron-migration nanostructure. To be specific, Cu-based metal-organic frameworks (MOFs) with high HOMO energy level are designed for H2O2 reduction on account of Cu(I)/Cu(II) redox switchability. Importantly, the sensing performance is improved by electrochemically reduced graphene oxide (GO) with ready to use feature. To overcome the shortcomings of traditional liquid electrolytes, conductive hydrogel as semi-solid electrolyte exhibits the adhesive property to the cut plant petiole surface. Benefitting from the preferred composite models and conductive hydrogel, the electrochemical sensing toward H2O2 with high sensitivity and good anti-interference against the coexistent molecules, well qualified for acquiring plant growth status.

Ultrasensitive and specific photoelectrochemical sensor for hydrogen peroxide detection based on pillar[5]arene-functionalized Au nanoparticles and MWNTs hybrid BiOBr heterojunction

A photoelectrochemical sensor for target detection of hydrogen peroxide was designed based on a new heterojunction nanocomposite which was sulfhydryl-borate ester-modified A1/B1-type pillar[5]arene (BP5)-functionalized Au NPs and multi-walled carbon nanotubes hybridized with bismuth bromide oxide (Au@BP5/MWNTs-BiOBr). The specific sensor was based on the direct induction of oxidation by hydrogen peroxide of the borate ester group of pillar[5]arene. Additionally, the local surface plasmon resonance (LSPR) of Au NPs enhanced visible light capture, the host-guest complexation of BP5 with H2O2 enhanced photocurrent response, the layer-by-layer stacked nanoflower structure of BiOBr provided large specific surface area with more active sites, and the conductivity of MWNTs enhanced the charge separation efficiency and significantly improves the stability of PEC. Their synthesis effect significantly increased the photocurrent signal and further enhanced the detection result. Under the optimal conditions, the linear concentration range of H2O2 detected by the Au@BP5/MWNTs-BiOBr sensor was from 1 to 60 pmol/L. The limit of detection (LOD) and the limit of quantification (LOQ) of the method were 0.333 pmol/L and 1 pmol/L, respectively, and the sensitivity was 6.471 pmol/L. Importantly, the PEC sensor has good stability, reproducibility, and interference resistance and can be used for the detection of hydrogen peroxide in real cells.

A double defects-dominated flexible TiO2 matrix for in-situ SERS sensing of antibiotic residues in aquatic ecosystem (fish & fishpond water) and their on-site degradation in flowing water

High-performance flexible semiconductor material can be used as an excellent multifunctional matrix for in-situ ultrasensitive surface-enhanced Raman scattering (SERS) detection and synchronous photocatalytic degradation of antibiotic residues in aquatic ecosystem. Here, a calcium-doped TiO2 flexible matrix with double defects (surface oxygen vacancy defect and Ti3+ energy level defect) was developed by its "in-situ one-step" hydrothermal synthesis on cotton fabric for the above purposes. Due to the joint contribution of double defects, a multi-channel charge transfer mode and a high-efficiency carrier separation are achieved, which endows flexible cotton fabric/Ca-doped TiO2 (Cot/Ca-TiO2) substrate with the greatly boosted SERS effect for in-situ detection of antibiotic residues on fish body surface and in fishpond water by a simple wiping or dipping sampling method, even for simultaneous identification of multi-component residues. The detection limits of three antibiotic residues (enrofloxacin, ciprofloxacin and enoxacin) are as low as 10-9 M, which are far lower than the EU standard. More meaningfully, the flexible Cot/Ca-TiO2 can be used as a multifunctional filter-membrane type photocatalyst for efficient on-site degradation of antibiotic residues in flowing fishpond water by a multi-grade photocatalysis means. Moreover, the flexible matrix exhibits good recyclability in both actual detection and photocatalysis.

A miniprotein receptor electrochemical biosensor chip based on quantum dots

Recently protein binders have emerged as a promising substitute for antibodies due to their high specificity and low cost. Herein, we demonstrate an electrochemical biosensor chip through the electronic labelling strategy using lead sulfide (PbS) colloidal quantum dots (CQDs) and the unnatural SARS-CoV-2 spike miniprotein receptor LCB. The unnatural receptor can be utilized as a molecular probe for the construction of CQD-based electrochemical biosensor chips, through which the specific binding of LCB and the spike protein is transduced to sensor electrical signals. The biosensor exhibits a good linear response in the concentration range of 10 pg mL-1 to 1 μg mL-1 (13.94 fM to 1.394 nM) with the limit of detection (LOD) being 3.31 pg mL-1 (4.607 fM for the three-electrode system) and 9.58 fg mL-1 (0.013 fM for the HEMT device). Due to the high sensitivity of the electrochemical biosensor, it was also used to study the binding kinetics between the unnatural receptor LCB and spike protein, which has achieved comparable results as those obtained with commercial equipment. To the best of our knowledge, this is the first example of using a computationally designed miniprotein receptor based on electrochemical methods, and it is the first kinetic assay performed with an electrochemical assay alone. The miniprotein receptor electrochemical biosensor based on QDs is desirable for fabricating high-throughput, large-area, wafer-scale biochips.

p-d Orbital Hybridization-Engineered PdSn Nanozymes for a Sensitive Immunoassay

Nanozymes with peroxidase-like activity have been extensively studied for colorimetric biosensing. However, their catalytic activity and specificity still lag far behind those of natural enzymes, which significantly affects the accuracy and sensitivity of colorimetric biosensing. To address this issue, we design PdSn nanozymes with selectively enhanced peroxidase-like activity, which improves the sensitivity and accuracy of a colorimetric immunoassay. The peroxidase-like activity of PdSn nanozymes is significantly higher than that of Pd nanozymes. Theoretical calculations reveal that the p-d orbital hybridization of Pd and Sn not only results in an upward shift of the d-band center to enhance hydrogen peroxide (H2O2) adsorption but also regulates the O-O bonding strength of H2O2 to achieve selective H2O2 activation. Ultimately, the nanozyme-linked immunosorbent assay has been successfully developed to sensitively and accurately detect the prostate-specific antigen (PSA), achieving a low detection limit of 1.696 pg mL-1. This work demonstrates a promising approach for detecting PSA in a clinical diagnosis.

Development of a Dual Fluorescence Signal-Enhancement Immunosensor Based on Substrate Modification for Simultaneous Detection of Interleukin-6 and Procalcitonin

High-sensitivity detection of biomarkers is of great significance to improve the accuracy of disease diagnosis and the rate of occult disease diagnosis. Using a substrate modification and two-color quantum dot (QD) nanobeads (QBs), we have developed a dual fluorescence signal-enhancement immunosensor for sensitive, simultaneous detection of interleukin 6 (IL-6) and procalcitonin (PCT) at low volumes (∼20 μL). First, the QBs compatible with QDs with different surface ligands were prepared by optimizing surfactants based on the microemulsion method. Through the use of a fluorescence-linked immunosorbent assay (FLISA), the feasibility of a dual signal-enhancement immunosensor was verified, and a 5-fold enhancement of fluorescence intensity was achieved after the directional coating of the antibodies on sulfhydryl functionalization (-SH) substrates and the preparation of QBs by using a polymer and silica double-protection method. Next, a simple polydimethylsiloxane (HS-PDMS) immunosensor with a low volume consumption was prepared. Under optimal conditions, we achieved the simultaneous detection of IL-6 and PCT with a linear range of 0.05-50 ng/mL, and the limit of detection (LOD) was 24 and 32 pg/mL, respectively. The result is comparable to two-color QBs-FLISA with a sulfhydryl microplate, even though only 20% of its volume was used. Thus, the dual fluorescence signal-enhancement HS-PDMS immunosensor offers the capability of early microvolume diagnosis of diseases, while the detection of inflammatory factors is clinically important for assisting disease diagnosis and determining disease progression.

Mxene quantum dots bipolar electrochemiluminescent platform for hepatitis C virus envelope protein E2 detection

A burgeoning diversified closed bipolar electrochemiluminescent (d-BPE-ECL) based on photothermal amplification biosensor via the thermophysical and photochemical properties of niobium carbide Mxene quantum dots (Nb2C MQDs) has been proposed. The device consists of three components: separated intermediate recognition, cathodic catalytic hydrogen evolution reaction (HER) and anodic ECL response channel. Wherein, the recognition compartment was innovatively designed as a temperature-sensitive conductivity modulated interface, and the introduction of photothermal material PDA@Nb2C MQDs through target mediated rolling circle amplification strategy increases the interface temperature under near-infrared light radiation, thereby enhancing the BPE current and leading to the amplification of the anode ECL signal of Nb2C MQDs. In addition, MoS2@Ni-Cu-P features excellent electrocatalytic activity, which can promote HER and thus accelerate electron transfer, further amplifying the ECL signal. Therefore, a highly sensitive d-BPE-ECL biosensor for hepatitis C virus envelope protein E2 detection with a linear range from 10-4 to 10 ng/mL and detection limit of 3.3 × 10-5 ng/mL was obtained. This work is expected to provide a new direction for exploring BPE multiple signal amplification strategy and broaden the application of BPE-ECL in bioassays.

Octahedral Cu2O nanomaterials as electrochemical aptasensor for sensitive detection of tetracycline in milk

In this work, A novel label-free electrochemical biosensor based on octahedral Cu2O @ Au nanocomposites was developed for the detection of tetracycline. The gold nanoparticles (AuNPs) on the surface of Cu2O nanomaterials not only improve the electrochemical performance, but also can be used as a binding site for thiol-modified tetracycline aptamers, which can specifically bind to tetracycline. Cu2O @ Au nanocomposites provide a synergistic effect of electrochemical signal amplification and tetracycline recognition strategy. Under the optimal conditions, the proposed biosensor exhibited different electrochemical reactions for different concentrations of tetracycline, with a linear range of 1 nM-1000 μM and a detection limit of 0.16 nM. This work provides a new idea for rapid and sensitive detection of tetracycline by using a simple and economical tetracycline aptamer combined with Cu2O @ Au biosensor platform.

The Role of Selenium Nanoparticles in Addressing Diabetic Complications: A Comprehensive Study

Diabetes, as an emerging epidemic, has put forward a significant spotlight on the evolving population worldwide grounded upon the remarkable affliction of healthcare along with economical conflict. Various studies suggested that, in modern society, lack of maintenance of a healthy life style leads to the occurrence of diabetes as insulin resistant, later having a damaging effect on the pancreatic β-cells, suggesting various complications. Furthermore, diabetes management is controversial owing to different opinions based on the prevention of complications. For this purpose, nanostructured materials (NSM) like selenium nanoparticles (SeNPs) have proved their efficiency in the therapeutic management of such serious diseases. This review offers an in- -depth idea regarding the pathophysiology, diagnosis and various conventional therapeutics of type 1 and type 2 diabetes, shedding light on Diabetic Nephropathy (DN), a case study of type 1 diabetes. Moreover, this review provides an exhaustive study by highlighting the economic and healthcare burdens associated with diabetes along with the controversies associated with conventional therapeutic management and the promising role of NSM like selenium nanoparticles (SeNPs), as a novel weapon for encountering such fatal diseases.

Bifunctional TiO2 Nanoflower-Induced H4TCBPE Aggregation Enhanced Electrochemiluminescence for an Ultrasensitive Assay of Organophosphorus

In this work, the aggregation-induced emission ligand 1,1,2,2-tetra(4-carboxylbiphenyl)ethylene (H4TCBPE) was rigidified in the Ti-O network to form novel electrochemiluminescence (ECL) emitter H4TCBPE-TiO2 nanospheres, which acted as an effective ECL emitter to construct an "on-off" ECL biosensor for ultrasensitive detection of malathion (Mal). H4TCBPE-TiO2 exhibited excellent ECL responses due to the Ti-O network that can restrict the intramolecular free motions within H4TCBPE and then reduce the nonradiative relaxation. Moreover, TiO2 can act as an ECL co-reaction accelerator to promote the generation of sulfate radical anion (SO4•-), which interacts with H4TCBPE in the Ti-O network to produce enhanced ECL response. In the presence of Mal, numerous ligated probes (probe 1 to probe 2, P1-P2) were formed and released by copper-free click nucleic acid ligation reaction, which then hybridized with hairpin probe 1 (H1)-modified H4TCBPE-TiO2-based electrode surface. The P1-P2 probes can initiate the target-assisted terminal deoxynucleoside transferase (TdTase) extended reaction to produce long tails of deoxyadenine with abundant biotin, which can load numerous streptavidin-functionalized ferrocenedicarboxylic acid polymer (SA-PFc), causing quenching of the ECL signal. Thus, the ultrasensitive ECL biosensor based on H4TCBPE-TiO2 ECL emitter and click chemistry-actuated TdTase amplification strategy presents a desirable range from 0.001 to 100 ng/mL and a detection limit low to 9.9 fg/mL. Overall, this work has paved an avenue for the development of novel ECL emitters, which has opened up new prospects for ECL biosensing.

Fabrication of near infrared light responsive photoelectrochemical immunosensor for in vivo detection of melanoma cells

Effective and convenient detection of melanoma cells with high sensitivity is essential to identify malignant melanoma in its early stage. However, the existing detection methods, such as immunohistochemical analysis, are too complicated and time-consuming to realize the convenient in vivo and in situ detection. Herein, a near infrared responsive photoelectrochemical (PEC) immunosensor is proposed with plasmonic Au nanoparticles-photonic TiO2 nanocaves (Au/TiO2 NCs) as photon harvest and conversion transducer and antibody as cell recognition unit. The micro-antibody/Au/TiO2 NCs photoelectrode can easily in vivo distinguish melanoma cells and can realize sensitive detection of melanoma cells in short time of 1 min with a lowest limit of detection of 2 cell mL-1. The PEC immunosensor strategy not only allows us to pioneeringly implement sensitive in vivo bio-detection, but also opens up a new avenue for rational design of cell recognition units and micro-electrode for universal and reliable bio-detections.

Congregating Ag into γ-Bi2O3 coupled with CoFe2O4 for enhanced visible light photocatalytic degradation of ciprofloxacin, Cr(VI) reduction and genotoxicity studies

The work attempts to construct a highly effective γ-Bi2O3/CoFe2O4/Ag visible active photocatalyst for the enhanced degradation of ciprofloxacin (CIP) and Cr(VI) reduction. γ-Bi2O3/CoFe2O4/Ag photocatalyst was prepared by simple solid phase and co-precipitation methods. The nanosphere shaped CoFe2O4 photocatalyst are embedded on top of γ-Bi2O3 nanotriangle. The addition of Ag into γ-Bi2O3/CoFe2O4 heterojunction primitively facilitates the photocatalytic activity in higher rate. The quantitative analysis of photocatalyst possesses to have lower e-/h+ recombination rate compared to its counterparts. The prepared γ-Bi2O3/CoFe2O4/Ag photocatalyst showed 96.6% degradation of CIP in 220 min and 99.2% reduction of Cr(VI) in 120 min. Additionally, γ-Bi2O3/CoFe2O4/Ag showed outstanding recyclability and long-term stability with a degradation efficiency of 96.5% even after six cycles. The intermediate products formed were identified and the degradation pathway was elucidated by gas chromatography-mass spectrometry analysis. Total organic carbon measurement was carried over to assess the efficiency of complete degradation and the removal percentage was found to be 98%. The end product toxicity study towards bacteria was proven to have less toxicity level when compared to parent compound. Lastly, the genotoxicity of γ-Bi2O3/CoFe2O4/Ag photocatalyst was tested in Allium cepa and the results confirmed to have no cause of toxicity impacts. Overall, the work not only tends to provide a highly visible active γ-Bi2O3/CoFe2O4/Ag photocatalyst, but also attributes to have no further negative imprints in the environment.

An Ultrasensitive Plasmonic Sensor Based on 2D Ferroelectric Bi2 O2 Se

Plasmonic biosensing is a label-free detection method that is commonly used to measure various biomolecular interactions. However, one of the main challenges in this approach is the ability to detect biomolecules at low concentrations with sufficient sensitivity and detection limits. Here, 2D ferroelectric materials are employed to address the issues with sensitivity in biosensor design. A plasmonic sensor based on Bi2 O2 Se nanosheets, a ferroelectric 2D material, is presented for the ultrasensitive detection of the protein molecule. Through imaging the surface charge density of Bi2 O2 Se, a detection limit of 1 fM is achieved for bovine serum albumin (BSA). These findings underscore the potential of ferroelectric 2D materials as critical building blocks for future biosensor and biomaterial architectures.

Resonance Rayleigh scattering technique-using chitosan-capped gold nanoparticles, approaches spectrofluorimetric method for determination of Bentazone residual in water samples

In this study, a resonance Rayleigh scattering technique-based sensing method for detecting Bentazone residual in water samples has been developed. This technique was carried out using chitosan-capped gold nanoparticles with a spectrofluorimetric method. Experimental results revealed that the developed method could allow the detection of Bentazone residual as low as a concentration of 0.02 ng mL-1 within 50-sec time. Overall results confirmed the very low detection limit for measuring the Bentazone. The chitosan-capped gold nanoparticles as an excellent sensor were applied to measure and analyze Bentazone in water samples.

Small-Molecule Probe-Induced In Situ-Sensitized Photoelectrochemical Biosensor for Monitoring α-Glucosidase Activity

Semiconductor-based photoelectrochemical (PEC) biosensors have garnered significant attention in the field of disease diagnosis and treatment. However, the recognition units of these biosensors are mainly limited to bioactive macromolecules, which hinder the photoelectric response due to their insulating characteristics. In this study, we develop an in situ-sensitized strategy that utilizes a small-molecule probe at the interface of the photoelectrode to accurately detect α-glucosidase (α-Glu) activity. Silane, a prototype small-molecule probe, was surface-modified on graphitic carbon nitride to generate Si nanoparticles upon reacting with hydroquinone, the enzymatic product of α-Glu. The in situ formed heterojunction enhances the light-harvesting property and photoexcited carrier separation efficiency. As a result, the in situ-sensitized PEC biosensor demonstrates excellent accuracy, a low detection limit, and outstanding anti-interference ability, showing good applicability in evaluating α-Glu activity and its inhibitors in human serum samples. This novel in situ sensitization approach using small-molecule probes opens up new avenues for developing simple and efficient PEC biosensing platforms by replacing conventional biorecognition elements.

Magnetic-assisted exciton-plasmon interactions modulated Bi2S3 nanorods@MoS2 nanosheets heterojunction: towards a split-type photoelectrochemical sensing of profenofos

A split-type photoelectrochemical (PEC) sensor was designed for the detection of profenofos (PFF) depending on the magnetic-assisted exciton-plasmon interactions (EPI) between the semiconductor substrate and Au NPs. The core-shell Bi2S3 nanorods@MoS2 nanosheets (Bi2S3 NRs@MoS2 NSs) heterostructure nanomaterial with fascinating performance was synthesized and used as the photovoltaic conversion substrate and signal molecules absorption platform. The PEC sensor is operated by co-incubating with the released Au NPs-cDNA from the surface of magnetic beads, originating from the target-triggered DNA double-stranded structure opening event. Due to the strong EPI effects, the photocurrent of Bi2S3 NRs@MoS2 NSs decreased and varied with the PFF concentrations. The proposed PEC sensor exhibited outstanding analytical performances, including a wide linear range (1.0 pg mL-1~1.0 μg mL-1), low detection limitation (0.23 pg mL-1, at 3 σ/m), excellent specificity, high stability, and applicability. Overall, this work provides a new signal strategy for PEC biosensors and extends its application in environmental analysis.

Ultrasound-Driven Defect Engineering in TiO2-x Nanotubes─Toward Highly Efficient Platinum Single Atom-Enhanced Photocatalytic Water Splitting

Single-atom catalysts (SACs) have demonstrated superior catalytic activity and selectivity compared to nanoparticle catalysts due to their high reactivity and atom efficiency. However, stabilizing SACs within hosting substrates and their controllable loading preventing single atom clustering remain the key challenges in this field. Moreover, the direct comparison of (co-) catalytic effect of single atoms vs nanoparticles is still highly challenging. Here, we present a novel ultrasound-driven strategy for stabilizing Pt single-atomic sites over highly ordered TiO2 nanotubes. This controllable low-temperature defect engineering enables entrapment of platinum single atoms and controlling their content through the reaction time of consequent chemical impregnation. The novel methodology enables achieving nearly 50 times higher normalized hydrogen evolution compared to pristine titania nanotubes. Moreover, the developed procedure allows the decoration of titania also with ultrasmall nanoparticles through a longer impregnation time of the substrate in a very dilute hexachloroplatinic acid solution. The comparison shows a 10 times higher normalized hydrogen production of platinum single atoms compared to nanoparticles. The mechanistic study shows that the novel approach creates homogeneously distributed defects, such as oxygen vacancies and Ti3+ species, which effectively trap and stabilize Pt2+ and Pt4+ single atoms. The optimized platinum single-atom photocatalyst shows excellent performance of photocatalytic water splitting and hydrogen evolution under one sun solar-simulated light, with TOF values being one order of magnitude higher compared to those of traditional thermal reduction-based methods. The single-atom engineering based on the creation of ultrasound-triggered chemical traps provides a pathway for controllable assembling stable and highly active single-atomic site catalysts on metal oxide support layers.

Ultrasensitive and Specific Clustered Regularly Interspaced Short Palindromic Repeats Empowered a Plasmonic Fiber Tip System for Amplification-Free Monkeypox Virus Detection and Genotyping

The urgent necessity for highly sensitive diagnostic tools has been accentuated by the ongoing mpox (monkeypox) virus pandemic due to the complexity in identifying asymptomatic and presymptomatic carriers. Traditional polymerase chain reaction-based tests, despite their effectiveness, are hampered by limited specificity, expensive and bulky equipment, labor-intensive operations, and time-consuming procedures. In this study, we present a clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a-based diagnostic platform with a surface plasmon resonance-based fiber tip (CRISPR-SPR-FT) biosensor. The compact CRISPR-SPR-FT biosensor, with a 125 μm diameter, offers high stability and portability, enabling exceptional specificity for mpox diagnosis and precise identification of samples with a fatal mutation site (L108F) in the F8L gene. The CRISPR-SPR-FT system can analyze viral double-stranded DNA from mpox virus without amplification in under 1.5 h with a limit of detection below 5 aM in plasmids and about 59.5 copies/μL when in pseudovirus-spiked blood samples. Our CRISPR-SPR-FT biosensor thus offers fast, sensitive, portable, and accurate target nucleic acid sequence detection.

A low-fouling electrochemical biosensor for biomarker detection in serum based on designed α/β-peptides with anti-enzymolysis and antifouling capabilities

The zwitterionic peptides, especially those composed of glutamic (E) and lysine (K) groups have drawn enormous attention as antifouling biomaterials owing to their strong hydration capability and biocompatibility. However, the susceptibility of α-amino acid K to the proteolytic enzymes in human serum limited the broad application of such peptides in biological media. Herein, a new multifunctional peptide with favorable stability in human serum was designed, and it was composed of three sections with immobilizing, recognizing and antifouling capabilities, respectively. The antifouling section was composed of alternating E and K amino acids, but the enzymolysis-susceptive amino acid α-K was replaced by the unnatural β-K. Compared with the conventional peptide composed of all α-amino acids, the α/β-peptide exhibited significantly enhanced stability and longer antifouling performance in human serum and blood. The electrochemical biosensor based on the α/β-peptide showed a favorable sensitivity to its target IgG, with a quite wide linear range from 100 pg mL^-1 to 10 μg mL^-1 and a low detection limit (33.7 pg mL^-1, S/N = 3), and it was promising for the detection of IgG in complex human serum. The tactic of designing antifouling α/β-peptides offered an efficient way to develop low-fouling biosensors with robust operation in complex body fluids.

Biological redox cycling amplification in a self-powered photoelectrochemical sensor based on TiO2/CdIn2S4/ g-C3N4-WO3 photoanode for sensitive detection of Hg2

A photoelectrochemical (PEC) sensor is proposed with a TiO₂/CdIn₂S₄ co-sensitive structure and a g-C₃N₄-WO₃ heterojunction as the photoanode to form a self-powered system. The photogenerated hole-induced biological redox cycle of TiO₂/CdIn₂S₄/g-C₃N₄-WO₃ composites is used as a signal amplification strategy for Hg²⁺ detection. In the test solution, ascorbic acid is first oxidized by the photogenerated hole of the TiO₂/CdIn₂S₄/g-C₃N₄-WO₃ photoanode, which triggers the ascorbic acid－glutathione cycle to achieve signal amplification and increase the photocurrent. However, in the presence of Hg²⁺, glutathione forms a complex with Hg²⁺, which destroys the biological cycle and leads to a decreased of photocurrent, thus achieving detection of Hg²⁺. Under optimal conditions, the proposed PEC sensor has a wider range (from 0.1 pM to 100 nM), and lower limit of Hg²⁺ detection (0.44 fM) than most other Hg²⁺ detection methods. In addition, the developed PEC sensor can be used to detect of real samples.

Label-Free Electrochemical Aptasensor for Sensitive Detection of Malachite Green Based on AuNPs/MWCNTs@TiO2 Nanocomposites

This study proposes a label-free aptamer biosensor for the sensitive detection of malachite green(MG) using gold nanoparticles/multi-walled carbon nanotubes @ titanium dioxide(AuNPs/MWCNTs@TiO₂). The nanocomposite provides a large surface area and good electrical conductivity, improving current transfer and acting as a platform for aptamer immobilization. The aptamer and the complementary chain(cDNA) are paired by base complementary to form the recognition element and fixed on the AuNPs by sulfhydryl group, which was modified on the cDNA. Since DNA is negatively charged, the redox probe in the electrolyte is less exposed to the electrode surface under the repulsion of the negative charge, resulting in a low-electrical signal level. When MG is present, the aptamer is detached from the cDNA and binds to MG, the DNA on the electrode surface is reduced, and the rejection of the redox probe is weakened, which leads to an enhanced electrical signal and enables the detection of MG concentration by measuring the change in the electrical signal. Under the best experimental conditions, the sensor demonstrates a good linear relationship for the detection of MG from 0.01 to 1000 ng/mL, the limit of detection (LOD)is 8.68 pg/mL. This sensor is stable, specific, and reproducible, allowing for the detection of various small-molecule pollutants by changing the aptamer, providing an effective method for detecting small-molecule pollutants.