Mesoporous TiO2 single crystals: facile shape-, size-, and phase-controlled growth and efficient photocatalytic performance

Silanol-Assisted High-Yield Nanofabrication of SnO2 Single Crystals with Highly Tunable and Ordered Mesoporosity

Highly ordered mesoporous materials with a single-crystalline structure have attracted broad interest due to their wide applications from catalysis to energy conversion/storage, but constructing them with good controllability and high yields remains a highly daunting task. Herein, we construct a new class of three-dimensionally ordered mesoporous SnO2 single crystals (3DOm-SnO2) with well-defined facets and excellent mesopore tunability. Mechanism studies demonstrate that the silanol groups on ordered silica nanospheres (3DO-SiO2) can induce the efficient heterogeneous crystallization of uniform SnO2 single crystals in its periodic voids by following the hard and soft acid and base theory, affording a much higher yield of ∼96% for 3DOm-SnO2 than that of its solid counterpart prepared in the absence of 3DO-SiO2 (∼1.5%). Benefiting from its permanent ordered mesopores and favorable electronic structure, Pd-supported 3DOm-SnO2 can efficiently catalyze the unprecedented sequential hydrogenation of 4-nitrophenylacetylene to produce 4-nitrostyrene, then 4-nitroethylbenzene, and finally 4-aminoethylbenzene. DFT calculations further reveal the favorable synergistic effect between Pd and 3DOm-SnO2 via moderate electron transfer for realizing this sequential hydrogenation reaction. Our work underlines the crucial role of silanol groups in inducing the high-yield heterogeneous crystallization of 3DOm-SnO2, shedding light on the rational design and construction of various 3DO single crystals that are of great practical significance.

Photoelectrochemical Engineering for Light-Assisted Rechargeable Metal Batteries: Mechanism, Development, and Future

Rechargeable battery devices with high energy density are highly demanded by  our  modern society. The use of metal anodes is extremely attractive for future rechargeable battery devices. However, the notorious metal dendritic and instability of solid electrolyte interface issues pose a series of challenges for metal anodes. Recently, considering the indigestible dynamical behavior of metal anodes, photoelectrochemical engineering of light-assisted metal anodes have been rapidly developed since they efficiently utilize the integration and synergy of oriented crystal engineering and photocatalysis engineering, which provided a potential way to unlock the interface electrochemical mechanism and deposition reaction kinetics of metal anodes. This review starts with the fundamentals of photoelectrochemical engineering and follows with the state-of-art advance of photoelectrochemical engineering for light-assisted rechargeable metal batteries where photoelectrode materials, working principles, types, and practical applications are explained. The last section summarizes the major challenges and some invigorating perspectives for future research on light-assisted rechargeable metal batteries.

Assessment of Performance of Photocatalytic Nanostructured Materials with Varied Morphology Based on Reaction Conditions

Synthesis of nanomaterials with specific morphology is an essential aspect for the optimisation of its properties and applications. The application of nanomaterials is being discussed in a wide range of areas, one of which is directly relevant to the environment through photocatalysis. To produce an effective photocatalyst for environmental applications, morphology plays an important role as it affects the surface area, interfaces, crystal facets and active sites, which ultimately affects efficiency. The method of synthesis and synthesis temperature can be the basic considerations for the evaluation of a particular nanomaterial. In this study, we have considered the aspects of morphology with a basic understanding and analyzed them in terms of nanomaterial efficacy in photocatalysis. Different morphologies of specific nanomaterials such as titanium dioxide, zinc oxide, silver phosphate, cadmium sulphide and zinc titanate have been discussed to come to reasonable conclusions. Morphologies such as nanorods, nanoflower, nanospindles, nanosheets, nanospheres and nanoparticles were compared within and outside the domain of given nanomaterials. The different synthesis strategies adopted for a specific morphology have been compared with the photocatalytic performance. It has been observed that nanomaterials with similar band gaps show different performances, which can be linked with the reaction conditions and their nanomorphology as well. Materials with similar morphological structures show different photocatalytic performances. TiO₂ nanorods appear to have the best features of efficient photocatalyst, while the nanoflowers show very low efficiency. For CdS, the nanoflower is the best morphology for photocatalysis. It appears that high surface area is the key apart from the morphology, which controls the efficiency. The overall understanding by analyzing all the available information has enumerated a path to select an effective photocatalyst amongst the several nanomaterials available. Such an analysis and comparison is unique and has provided a handle to select the effective morphology of nanomaterials for photocatalytic applications.

Preparation of mesoporous nitrogen-doped titania comprising large crystallites with low thermal conductivity

Reducing the thermal conductivity (κ) of mesoporous N-doped titania (TiO2) is crucial for the development of TiO2-based materials that exhibit excellent electronic, photochemical, and thermoelectric properties. Mesopores can contribute to the reduction of κ via phonon scattering, and the scattering effect due to the randomness of crystal interfaces should be significantly reduced to clarify the role of mesopores in reducing thermal conductivity. Highly ordered mesoporous N-doped TiO2 comprising large crystallites was prepared with silica colloidal crystals as a template into which a Ti source was introduced, followed by calcination with urea. N-doped samples comprising large crystallites exhibiting random mesopores were also prepared and used for the investigation of the effects of the shape and arrangement of the mesopore on phonon scattering. The mesostructures of the two separately prepared N-doped TiO2 samples were retained after sintering at 873 K and 80 MPa to fabricate pellets. Furthermore, the effective suppression of the long mean-free-path phonon conduction by the thin pore walls at a nanometer scale thickness significantly reduced the thermal conductivities of both samples. The presence of ordered mesopores further contributed to the reduction of κ, which was probably due to the enhanced contribution of the backscattering of phonons caused by ordered pore wall surfaces.

Insights of the formation mechanism of nanostructured titanium oxide polymorphs from different macromolecular metal-complex precursors

The insight into the mechanism of the unprecedented formation of pure anatase TiO2 from the macromolecular (Chitosan)•(TiOSO4)n precursor has been investigated using micro Raman spectroscopy, Scanning Electron Microscopy (SEM) and thermogravimetric/differential thermal analysis (TGA/DTA). The formation of a graphitic film was observed upon annealing of the macromolecular precursor, reaching a maximum at about 500 °C due to decomposition of the polymeric chain of the Chitosan and (PS-co-4-PVP) polymers. The proposed mechanism is the nucleation and growth of TiO2 nanoparticles over this graphitic substrate. SEM and Raman measurements confirm the formation of TiO2 anatase around 400 °C. The observation of an exothermic peak around 260 °C in the TGA/DTA measurements confirms the decomposition of carbon chains to form graphite. Another exothermic peak around 560 °C corresponds to the loss of additional carbonaceous residues.

Surface engraving engineering of polyhedral photocatalysts

Surface engraving engineering of polyhedral photocatalysts is overviewed based on synthetic strategies and engraved surface-related photocatalytic mechanisms. Some challenges and perspectives are also proposed.

Trace-Level Fluorination of Mesoporous TiO2 Improves Photocatalytic and Pb(II) Adsorbent Performances

Fluorination is an effective way of tuning the physicochemical property and activity of TiO₂ nanocrystallites, which usually requires a considerable amount of hydrofluoric acid (or NH₄F) for a typical F/Ti molar ratio, R_F, of 0.5-69.0 during synthesis. This has consequential environmental issues due to the high toxicity and hazard of the reactants. In the present work, an environmentally benign fluorination approach is demonstrated that uses only a trace amount of sodium fluoride with an R_F of 10^-6 during synthesis. While it maintained the desirable high surface area (102.4 m²/g), the trace-level fluorination enabled significant enhancements on photocatalytic activities (e.g., a 56% increase on hydrogen evolution rate) and heavy metal Pb(II) removal (31%) of the mesoporous TiO₂. This can be attributed to enriched Ti³⁺ and localized spatial charge separation due to fluorination as proved by X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance spectroscopy (EPR), and density functional theory (DFT) analyses.

Controlled synthesis of mesoporous single-crystalline TiO2 nanoparticles for efficient photocatalytic H2 evolution

Mesoporous single-crystals have emerged as a unique family of functional materials, exhibiting excellent performance in various applications, owing to their well-defined accessible mesoporosity and highly single-crystalline structures. Precise tailoring structures of mesoporous single-crystals at the nanoscale remains an unsolved scientific and technical challenge. Herein, we report a facile and general approach for the synthesis of mesoporous single-crystalline TiO₂ nanoparticles (designated as MSC-TNs) with distinctive traits including tunable morphologies, controllable particle sizes, well dispersity, high hydrophilicity, well-defined mesoporosity and single-crystal nature. Specifically, the amount of water employed in the precursor solution was seen to give fine control over the particle sizes and morphologies of MSC-TNs. MSC-TNs with different sizes show excellent photocatalytic activity in production of hydrogen from water. Under the illumination of 300 W Xe lamp, MSC-TNs were shown to provide good photodegradation performance with Rhodamine 6 G, as well as H₂ production when loaded 1 wt % Pt. In a CH₃OH solution H₂ was evolved with a rate of 8.98 mmol h^-1 g^-1, which is significantly higher than with commercial P25 nanoparticles (4.02 mmol h^-1 g^-1).

Effects of Particle Size on the Structure and Photocatalytic Performance by Alkali-Treated TiO2

Particle size of nanomaterials has significant impact on their photocatalyst properties. In this paper, TiO₂ nanoparticles with different crystalline sizes were prepared by adjusting the alkali-hydrothermal time (0–48 h). An annealing in N₂ atmosphere after hydrothermal treatment caused TiO₂ reduction and created defects, resulting in the visible light photocatalytic activity. The evolution of physicochemical properties along with the increase of hydrothermal time at a low alkali concentration has been revealed. Compared with other TiO₂ samples, TiO₂-24 showed higher photocatalytic activity toward degrading Rhodamine B and Sulfadiazine under visible light. The radical trapping and ESR experiments revealed that O₂^•- is the main reactive specie in TiO₂-24. Large specific surface areas and rapid transfer of photogenerated electrons are responsible for enhancing photocatalytic activity. The above findings clearly demonstrate that particle size and surface oxygen defects can be regulated by alkali-hydrothermal method. This research will deepen the understanding of particle size on the nanomaterials performance and provide new ideas for designing efficient photocatalysts.

Effect of aspect ratios of rutile TiO2 nanorods on overall photocatalytic water splitting performance

The spatial separation of reduction and oxidation reaction sites on the different facets of a semiconductor is an ideal and promising route for overall photocatalytic water splitting due to efficient charge carrier separation. Rutile TiO2 has separate oxidation and reduction crystal facets and can be used to achieve direct splitting of pure water under ultraviolet (UV) light irradiation. In order to improve the rate of water oxidation reaction, the ratio of different crystal facets of rutile should be regulated controllably. However, the preparation of rutile TiO2 architecture has been limited by the availability of synthetic techniques. In this study, rutile TiO2 nanorods with various aspect ratios were accurately prepared in the presence of Cl- anions and H+ cations, which were found to play a crucial role in forming the morphology of rutile TiO2 nanorods. In addition, the mechanism involving the growth of rutile TiO2 nanorods with different aspect ratios is proposed. Rutile TiO2 nanorods with a high proportion of oxidative (111) facets provided higher overall water splitting reactivity.

Recent advances in amphiphilic block copolymer templated mesoporous metal-based materials: assembly engineering and applications

Mesoporous metal-based materials (MMBMs) have received unprecedented attention in catalysis, sensing, and energy storage and conversion owing to their unique electronic structures, uniform mesopore size and high specific surface area. In the last decade, great progress has been made in the design and application of MMBMs; in particular, many novel assembly engineering methods and strategies based on amphiphilic block copolymers as structure-directing agents have also been developed for the "bottom-up" construction of a variety of MMBMs. Development of MMBMs is therefore of significant importance from both academic and practical points of view. In this review, we provide a systematic elaboration of the molecular assembly methods and strategies for MMBMs, such as tuning the driving force between amphiphilic block copolymers and various precursors (i.e., metal salts, nanoparticles/clusters and polyoxometalates) for pore characteristics and physicochemical properties. The structure-performance relationship of MMBMs (e.g., pore size, surface area, crystallinity and crystal structure) based on various spectroscopy analysis techniques and density functional theory (DFT) calculation is discussed and the influence of the surface/interfacial properties of MMBMs (e.g., active surfaces, heterojunctions, binding sites and acid-base properties) in various applications is also included. The prospect of accurately designing functional mesoporous materials and future research directions in the field of MMBMs is pointed out in this review, and it will open a new avenue for the inorganic-organic assembly in various fields.

Recent advances in the synthesis of hierarchically mesoporous TiO2 materials for energy and environmental applications

Because of their low cost, natural abundance, environmental benignity, plentiful polymorphs, good chemical stability and excellent optical properties, TiO₂ materials are of great importance in the areas of physics, chemistry and material science. Much effort has been devoted to the synthesis of TiO₂ nanomaterials for various applications. Among them, mesoporous TiO₂ materials, especially with hierarchically porous structures, show great potential owing to their extraordinarily high surface areas, large pore volumes, tunable pore structures and morphologies, and nanoscale effects. This review aims to provide an overview of the synthesis and applications of hierarchically mesoporous TiO₂ materials. In the first section, the general synthetic strategies for hierarchically mesoporous TiO₂ materials are reviewed. After that, we summarize the architectures of hierarchically mesoporous TiO₂ materials, including nanofibers, nanosheets, microparticles, films, spheres, core-shell and multi-level structures. At the same time, the corresponding mechanisms and the key factors for the controllable synthesis are highlighted. Following this, the applications of hierarchically mesoporous TiO₂ materials in terms of energy storage and environmental protection, including photocatalytic degradation of pollutants, photocatalytic fuel generation, photoelectrochemical water splitting, catalyst support, lithium-ion batteries and sodium-ion batteries, are discussed. Finally, we outline the challenges and future directions of research and development in this area.

Photocatalytic Oxygen Evolution from Water Splitting

Photocatalytic water splitting has attracted a lot of attention in recent years, and O2 evolution is the decisive step owing to the complex four-electrons reaction process. Though many studies have been conducted, it is necessary to systematically summarize and introduce the research on photocatalytic O2 evolution, and thus a systematic review is needed. First, the corresponding principles about O2 evolution and some urgently encountered issues based on the fundamentals of photocatalytic water splitting are introduced. Then, several types of classical water oxidation photocatalysts, including TiO2, BiVO4, WO3, α-Fe2O3, and some newly developed ones, such as Sillén-Aurivillius perovskites, porphyrins, metal-organic frameworks, etc., are highlighted in detail, in terms of their crystal structures, synthetic approaches, and morphologies. Third, diverse strategies for O2 evolution activity improvement via enhancing photoabsorption and charge separation are presented, including the cocatalysts loading, heterojunction construction, doping and vacancy formation, and other strategies. Finally, the key challenges and future prospects with regard to photocatalytic O2 evolution are proposed. The purpose of this review is to provide a timely summary and guideline for the future research works for O2 evolution.

Bifunctional TiO2/AlZr Thin Films on Steel Substrate Combining Corrosion Resistance and Photocatalytic Properties

A novel multi-functional bilayer coating combining an anti-corrosion Al–Zr (4 at.% Zr) underlayer and an anti-biofouling TiO2 top layer was deposited on high-speed steel (HSS) substrates. Al–Zr (4 at.% Zr) film, deposited by DC magnetron sputtering, which is a single phased supersaturated solid solution of Zr in Al, is used to provide sacrificial corrosion resistance of steels and TiO2 is added as a top layer to induce photocatalytic activity and hydrophilic behavior which can generate antifouling properties in order to slow down the biofouling process. The top TiO2 films, deposited at 550 °C by AACVD (aerosol-assisted chemical vapor deposition), consisting of anatase TiO2 microflowers physically attached to the TiO2 thin films present a high decomposition rate of Orange G dye (780 × 10−10 mol L−1·min−1). The enhanced photocatalytic performance is associated with the rough network and the presence of TiO2 microflowers capable of supporting the enhanced loading of organic contaminants onto the film surface. Electrochemical tests in saline solution have revealed that bilayer films provide cathodic protection for the steel substrate. The Al–Zr/TiO2 bilayer presents a lower corrosion current density of 4.01 × 10−7 A/cm2 and a corrosion potential of −0.61 V vs Ag/AgCl, offering good protection through the preferential oxidation of the bilayer and an increased pitting resistance. The proposed functionalized coating combining anticorrosion and photocatalytic properties is a promising candidate for an anti-fouling system in sea water.

Rational Design of Photoelectrodes with Rapid Charge Transport for Photoelectrochemical Applications

Photoelectrode materials are the heart of photoelectrochemical (PEC) cells, which hold great promise to address global energy and environmental issues by converting solar energy into electricity or chemical fuels. In recent decades, significant research efforts have been devoted to the design and construction of photoelectrodes for the efficient generation and utilization of charge carriers to boost PEC performance. Herein, insights from a literature study on the relationship between the architecture and charge dynamics of photoelectrodes are presented. After briefly introducing the fundamental theories of charge dynamics in nanostructured photoelectrodes, the development of photoelectrode design in 1D polycrystalline nanotube arrays, 1D single-crystalline nanowire arrays, and hierarchical and mesoporous nanowire arrays is reviewed with a focus on the interplay between architecture and charge transport properties. For each design, commonly used synthetic approaches and the corresponding charge transport properties are discussed. Subsequently, the applications of these photoelectrodes in PEC systems are summarized. In conclusion, future challenges in the rational design of photoelectrode architecture are presented. The basic relationships between the architectures and charge dynamics of photoelectrode materials discussed here are expected to provide pertinent guidance and a reference for future advanced material design targeting improved light energy conversion systems.

Mesocrystals for photocatalysis: a comprehensive review on synthesis engineering and functional modifications

Mesocrystals are a new class of superstructures that are generally made of crystallographically highly ordered nanoparticles and could function as intermediates in a non-classical particle-mediated aggregation process. In the past decades, extensive research interest has been focused on the structural and morphogenetic aspects, as well as the growth mechanisms, of mesocrystals. Unique physicochemical properties including high surface area and ordered porosity provide new opportunities for potential applications. In particular, the oriented interfaces in mesocrystals are considered to be beneficial for effective photogenerated charge transfer, which is a promising photocatalytic candidate for promoting charge carrier separation. Only recently, remarkable advances have been reported with a special focus on TiO2 mesocrystal photocatalysts. However, there is still no comprehensive overview on various mesocrystal photocatalysts and their functional modifications. In this review, different kinds of mesocrystal photocatalysts, such as TiO2 (anatase), TiO2 (rutile), ZnO, CuO, Ta2O5, BiVO4, BaZrO3, SrTiO3, NaTaO3, Nb3O7(OH), In2O3-x (OH) y , and AgIn(WO4)2, are highlighted based on the synthesis engineering, functional modifications (including hybridization and doping), and typical structure-related photocatalytic mechanisms. Several current challenges and crucial issues of mesocrystal-based photocatalysts that need to be addressed in future studies are also given.

In Situ Formation of Micropore-Rich Titanium Dioxide from Metal-Organic Framework Templates

Phase and porosity control in titanium dioxide (TiO₂) is essential for the optimization of its photocatalytic activity. However, concurrent control over these two parameters remains challenging. Here, a novel metal-organic framework templating strategy is demonstrated for the preparation of highly microporous anatase TiO₂. In situ encapsulation of Ti precursor in ZIF-8 cavities, followed by hydrolysis and etching, produces anatase TiO₂ with a high Brunauer-Emmett-Teller surface area of 335 m²·g^-1 and a micropore surface area ratio of 48%. Photocatalytic hydrogen generation catalyzed by the porous TiO₂ can reach a rate of 2459 μmol·g^-1·h^-1. The measured photocatalytic activity is found to be positively correlated to the surface area, highlighting the importance of porosity control in heterogeneous photocatalysts.

Fully printable hole-conductor-free mesoscopic perovskite solar cells based on mesoporous anatase single crystals

Mesoporous anatase single crystal titania with a small particle size was introduced into fully printable hole-conductor-free hybrid solar cells, which shows an optimal electron transport and carrier lifetime, leading to an enhanced device performance.

Designer hydrogenated wrinkled yolk@shell TiO2 architectures towards advanced visible light photocatalysts for selective alcohol oxidation

Advanced wrinkled yolk@shell-TiO₂ architectures were prepared via three sequential steps and provided excellent visible-light photocatalytic activities in selective alcohol oxidation.

Size and shape distributions of primary crystallites in titania aggregates

The primary crystallite size of titania powder relates to its properties in a number of applications. Transmission electron microscopy was used in this interlaboratory comparison (ILC) to measure primary crystallite size and shape distributions for a commercial aggregated titania powder. Data of four size descriptors and two shape descriptors were evaluated across nine laboratories. Data repeatability and reproducibility was evaluated by analysis of variance. One-third of the laboratory pairs had similar size descriptor data, but 83% of the pairs had similar aspect ratio data. Scale descriptor distributions were generally unimodal and were well-described by lognormal reference models. Shape descriptor distributions were multi-modal but data visualization plots demonstrated that the Weibull distribution was preferred to the normal distribution. For the equivalent circular diameter size descriptor, measurement uncertainties of the lognormal distribution scale and width parameters were 9.5% and 22%, respectively. For the aspect ratio shape descriptor, the measurement uncertainties of the Weibull distribution scale and width parameters were 7.0% and 26%, respectively. Both measurement uncertainty estimates and data visualizations should be used to analyze size and shape distributions of particles on the nanoscale.

Synthesis of yellow mesoporous Ni-doped TiO2 with enhanced photoelectrochemical performance under visible light

Ordered mesoporous Ni-doped TiO₂ were synthesized by a multicomponent self-assembly process.

In situ strategy to prepare PDPB/SnO2 p–n heterojunction with a high photocatalytic activity

PDPB/SnO₂ heterojunction has been successfully synthesized by an in situ growth strategy, which displays a narrowed bandgap, enhanced solar light absorption, excellent charge separation and improved solar-driven photodegradation rate of Rhodamine B.

Synthesis of Monodisperse Mesoporous TiO2 Nanospheres from a Simple Double-Surfactant Assembly-Directed Method for Lithium Storage

Exploring facile and reproducible methods to prepare mesoporous TiO2 nanospheres is crucial for improving the performance of TiO2 materials for energy conversion and storage. Herein, we report a simple and reproducible double-surfactant assembly-directed method to prepare monodisperse mesoporous TiO2 nanospheres. A double-surfactant system of n-dodecylamine (DDA) and Pluronic F127 was adopted to control the hydrolysis and condensation rates of tetrabutyl titanate in a mixture of water and alcohol at room temperature. In this process, the diameter size of mesoporous TiO2 nanospheres can be simply tuned from ∼50 to 250 nm by varying the concentration of H2O and surfactants. The double-surfactant system of DDA and F127 plays an effective role in determining the size, morphology, and monodispersity of mesoporous TiO2 nanospheres to reduce agglomeration during the sol-gel process. The resultant mesoporous anatase TiO2 nanospheres after solvothermal treatment at 160 °C are built of interpenetrating nanocrystals with a size of ∼10 nm, which are arranged to obtain a large number of connecting mesopores. Mesoporous TiO2 nanospheres with a small diameter size of around 50 nm possess a high surface area (∼160 m(2)/g) and mesopores with sizes of 4-30 nm. The small diameter size, high crystallinity, and mesoporous structure of TiO2 nanospheres lead to excellent performance in cycling stability and rate capability for lithium-ion batteries. After 500 cycles, the monodisperse mesoporous TiO2 nanospheres exhibit a charge capacity as high as 156 mAhg(-1) without obvious fade, and the Coulombic efficiency can reach up to 100%.

Photocatalytic Water Splitting-The Untamed Dream: A Review of Recent Advances

Photocatalytic water splitting using sunlight is a promising technology capable of providing high energy yield without pollutant byproducts. Herein, we review various aspects of this technology including chemical reactions, physiochemical conditions and photocatalyst types such as metal oxides, sulfides, nitrides, nanocomposites, and doped materials followed by recent advances in computational modeling of photoactive materials. As the best-known catalyst for photocatalytic hydrogen and oxygen evolution, TiO₂ is discussed in a separate section, along with its challenges such as the wide band gap, large overpotential for hydrogen evolution, and rapid recombination of produced electron-hole pairs. Various approaches are addressed to overcome these shortcomings, such as doping with different elements, heterojunction catalysts, noble metal deposition, and surface modification. Development of a photocatalytic corrosion resistant, visible light absorbing, defect-tuned material with small particle size is the key to complete the sunlight to hydrogen cycle efficiently. Computational studies have opened new avenues to understand and predict the electronic density of states and band structure of advanced materials and could pave the way for the rational design of efficient photocatalysts for water splitting. Future directions are focused on developing innovative junction architectures, novel synthesis methods and optimizing the existing active materials to enhance charge transfer, visible light absorption, reducing the gas evolution overpotential and maintaining chemical and physical stability.

Synthesis of Mesoporous Single Crystal Co(OH)2 Nanoplate and Its Topotactic Conversion to Dual-Pore Mesoporous Single Crystal Co3O4

A new class of mesoporous single crystalline (MSC) material, Co(OH)2 nanoplates, is synthesized by a soft template method, and it is topotactically converted to dual-pore MSC Co3O4. Most mesoporous materials derived from the soft template method are reported to be amorphous or polycrystallined; however, in our synthesis, Co(OH)2 seeds grow to form single crystals, with amphiphilic block copolymer F127 colloids as the pore producer. The single-crystalline nature of material can be kept during the conversion from Co(OH)2 to Co3O4, and special dual-pore MSC Co3O4 nanoplates can be obtained. As the anode of lithium-ion batteries, such dual-pore MSC Co3O4 nanoplates possess exceedingly high capacity as well as long cyclic performance (730 mAh g(-1) at 1 A g(-1) after the 350th cycle). The superior performance is because of the unique hierarchical mesoporous structure, which could significantly improve Li(+) diffusion kinetics, and the exposed highly active (111) crystal planes are in favor of the conversion reaction in the charge/discharge cycles.

D-sorbitol-induced phase control of TiO2 nanoparticles and its application for dye-sensitized solar cells

Using a simple hydrothermal synthesis, the crystal structure of TiO₂ nanoparticles was controlled from rutile to anatase using a sugar alcohol, D-sorbitol. Adding small amounts of D-sorbitol to an aqueous TiCl₄ solution resulted in changes in the crystal phase, particle size, and surface area by affecting the hydrolysis rate of TiCl₄. These changes led to improvements of the solar-to-electrical power conversion efficiency (η) of dye-sensitized solar cells (DSSC) fabricated using these nanoparticles. A postulated reaction mechanism concerning the role of D-sorbitol in the formation of rutile and anatase was proposed. Fourier-transform infrared spectroscopy, ¹³C NMR spectroscopy, and dynamic light scattering analyses were used to better understand the interaction between the Ti precursor and D-sorbitol. The crystal phase and size of the synthesized TiO₂ nanocrystallites as well as photovoltaic performance of the DSSC were examined using X-ray diffraction, Raman spectroscopy, field-emission scanning electron microscopy, high-resolution transmission electron microscopy, and photocurrent density-applied voltage spectroscopy measurement techniques. The DSSC fabricated using the anatase TiO₂ nanoparticles synthesized in the presence of D-sorbitol, exhibited an enhanced η (6%, 1.5-fold improvement) compared with the device fabricated using the rutile TiO₂ synthesized without D-sorbitol.

Engineered Hematite Mesoporous Single Crystals Drive Drastic Enhancement in Solar Water Splitting

Mesoporous single crystals (MSCs) rendering highly accessible surface area and long-range electron conductivity are extremely significant in many fields, including catalyst, solar fuel, and electrical energy storage technologies. Hematite semiconductor, whose performance has been crucially limited by its pristine poor charge separation efficiency in solar water splitting, should benefit from this strategy. Despite successful synthesis of many metal oxide MSCs, the fabrication of hematite MSCs remains to be a great challenge due to its quite slow hydrolysis rate in water. Herein, for the first time, we have developed a synthetic strategy to prepare hematite MSCs and systematically investigated their growth mechanism. The electrode fabricated with these crystals is able to achieve a photocurrent density of 0.61 mA/cm(2) at 1.23 V vs RHE under AM 1.5G simulated sunlight, which is 20 times higher than that of electrodes made of solid single crystals. The enhancement is ascribed to the superior light absorption and enhanced charges separation. Our results demonstrate the advantage of incorporation of nanopores into the large-sized hematite single crystals and provide a valuable insight for the development of high performance photoelectrodes in PEC application.

Graphene modified mesoporous titania single crystals with controlled and selective photoredox surfaces

The selective photocatalysis of TiO₂ can be achieved by controlling the location of graphene in TiO₂ mesoporous single crystals. The sandwich structured graphene–TiO₂ composite has a photooxidation surface, and the core–shell structured TiO₂@graphene has a photoreduction surface.

Phase-dependent enhancement for CO2 photocatalytic reduction over CeO2/TiO2 catalysts

The addition of CeO₂ can increase the activity of rutile for CO₂ photoreduction under simulated sunlight irradiation because of the presence of Ti defects at the CeO₂–rutile interfaces, and this is beneficial to the interfacial separation of photogenerated charge carriers.

A room temperature approach for the fabrication of aligned TiO2 nanotube arrays on transparent conductive substrates

A novel room-temperature solution-approach is reported for the fabrication of highly crystallized TiO₂ nanotube arrays on transparent conductive substrates.

Sulfur nanoparticles in situ growth on TiO2 mesoporous single crystals with enhanced solar light photocatalytic performance

Sulfur nanoparticles in situ growth on TiO₂ mesoporous single crystals with the narrowed band gap, and the coupling effect between sulfur and TiO₂ is responsible for the enhancement of solar light photocatalytic performance.

Double-diffusion-based synthesis of BiVO4 mesoporous single crystals with enhanced photocatalytic activity for oxygen evolution

BiVO₄ mesoporous single crystals (MSCs) were successfully prepared, for the first time, by a one-step hydrothermal method using the acidified BiVO₄ precursor solution pre-impregnated silica as the template.

A Novel Mesoporous Single-Crystal-Like Bi2WO6 with Enhanced Photocatalytic Activity for Pollutants Degradation and Oxygen Production

The porous single-crystal-like micro/nanomaterials exhibited splendid intrinsic performance in photocatalysts, dye-sensitized solar cells, gas sensors, lithium cells, and many other application fields. Here, a novel mesoporous single-crystal-like Bi2WO6 tetragonal architecture was first achieved in the mixed molten salt system. Its crystal construction mechanism originated from the oriented attachment of nanosheet units accompanied by Ostwald ripening process. Additionally, the synergistic effect of mixed alkali metal nitrates and electrostatic attraction caused by internal electric field in crystal played a pivotal role in oriented attachment process of nanosheet units. The obtained sample displayed superior photocatalytic activity of both organic dye degradation and O2 evolution from water under visible light. We gained an insight into this unique architecture's impact on the physical properties, light absorption, photoelectricity, and luminescent decay, etc., that significantly influenced photocatalytic activity.

Controlling the Morphology of Organic Crystals with Filamentous Bacteriophages

The preparation of thiamethoxam (TMX) organic crystals with high morphological uniformity was achieved by controlled aggregation-driven crystallization of primitive TMX crystals and phage using the filamentous M13 bacteriophage. The development of a regular, micrometer-sized, tetragonal-bipyramidal crystal structure was dependent on the amount of phage present. The phage appears to affect the supersaturation driving force for crystallization. The phage adsorption isotherm to TMX was well-fitted by the Satake-Yang model, which suggests a cooperative binding between neighboring phages as well as a binding of phage with the TMX crystal surface. This study shows the potential of phage additives to control the morphology and morphological uniformity of organic crystals.