A facile one-pot method to synthesize a polypyrrole/hemin nanocomposite and its application in biosensor, dye removal, and photothermal therapy

Strong, Tough, and Anti-Swelling Supramolecular Conductive Hydrogels for Amphibious Motion Sensors

Conductive polymer hydrogels (CPHs) are widely employed in emerging flexible electronic devices because they possess both the electrical conductivity of conductors and the mechanical properties of hydrogels. However, the poor compatibility between conductive polymers and the hydrogel matrix, as well as the swelling behavior in humid environments, greatly compromises the mechanical and electrical properties of CPHs, limiting their applications in wearable electronic devices. Herein, a supramolecular strategy to develop a strong and tough CPH with excellent anti-swelling properties by incorporating hydrogen, coordination bonds, and cation-π interactions between a rigid conducting polymer and a soft hydrogel matrix is reported. Benefiting from the effective interactions between the polymer networks, the obtained supramolecular hydrogel has homogeneous structural integrity, exhibiting remarkable tensile strength (1.63 MPa), superior elongation at break (453%), and remarkable toughness (5.5 MJ m-3 ). As a strain sensor, the hydrogel possesses high electrical conductivity (2.16 S m-1 ), a wide strain linear detection range (0-400%), and excellent sensitivity (gauge factor = 4.1), sufficient to monitor human activities with different strain windows. Furthermore, this hydrogel with high swelling resistance has been successfully applied to underwater sensors for monitoring frog swimming and underwater communication. These results reveal new possibilities for amphibious applications of wearable sensors.

Adenine phosphate-Cu nanozyme with multienzyme mimicking activity for efficient degrading phenolic compounds and detection of hydrogen peroxide, epinephrine and glutathione

BACKGROUND

With the development of nanotechnology, various nanomaterials with enzyme-like activity (nanozymes) have been reported. Due to their superior properties, nanozymes have shown important application potential in the fields of bioanalysis, disease detection, and environmental remediation. However, only a few nanomaterials with multi-enzyme mimicry activity have been reported. In this study, a novel multienzyme mimic was synthesized through a simple and rapid preparation protocol by coordinating copper ions with N3, N6 (amino), N7, and N9 on adenine phosphate.

RESULTS

The prepared adenine phosphate-Cu complex exhibits significant peroxidase, laccase, and oxidase mimicking activities. The Michaelis-Menten constant (Km) and the maximal velocity (Vmax) values of the peroxidase, laccase, and oxidase mimicking activities of AP-Cu nanozyme are 0.052 mM, 0.14 mM, and 2.49 mM; and 0.552 μM min-1, 6.70 μM min-1, and 2.24 μM min-1, respectively. Then, based on its laccase mimicking activity, the nanozyme was applied in the degradation of phenolic compounds. The calculated kinetic constant for the degradation of 2,4-dichlorophenol is 0.468 min-1 and the degradation efficiency of 2,4-dichlorophenol (0.1 mM) reaches 96.14% at 7 min. Finally, based on the multienzyme mimicking activity of adenine phosphate-Cu nanozyme, simple colorimetric sensing methods with high sensitivity and good selectivity were developed for the detection of hydrogen peroxide, epinephrine, and glutathione in the ranges of 20.0-200.0 μM (R2 = 0.9951), 5.0-100.0 μM (R2 = 0.9970), and 5.0-200.0 μM (R2 = 0.9924) with the limits of quantitation of 20.0 μM, 5.0 μM, and 5.0 μM, respectively.

SIGNIFICANCE

In short, the synthesis of nanozymes with multi-enzyme mimicry activity through coordination between copper ions and small molecule mimicry enzymes provides new ideas for the design and research of multi-enzyme mimics.

Specific Chemiluminescence Imaging and Enhanced Photodynamic Therapy of Bacterial Infections by Hemin-Modified Carbon Dots

Antibacterial photodynamic therapy (aPDT) is a promising antibiotics-alternative strategy for bacterial infectious diseases, which features broad-spectrum antibacterial activity with a low risk of inducing bacterial resistance. However, clinical applications of aPDT are still hindered by the hydrophobicity-caused inadequate photodynamic activity of conventional photosensitizers and the hypoxic microenvironment of bacterial infections. To address these problems, herein, a promising strategy is developed to achieve specific chemiluminescence (CL) imaging and enhanced PDT of bacterial infections using hemin-modified carbon dots (H-CDs). The H-CDs can be facilely prepared and exhibit favorable water solubility, augmented photodynamic activity, and unique peroxidase-mimicking capacity. Compared with the free CDs, the photodynamic efficacy of H-CDs is significantly augmented due to the increased electron-hole separation efficiency. Moreover, the peroxidase catalytic performance of H-CDs enables not only infection identification via bacterial infection microenvironment-responsive CL imaging but also oxygen self-supplied aPDT with hypoxia-relief-enhanced bacteria inactivation effects. Finally, the enhanced aPDT efficiencies of H-CDs are validated in both in vivo abscess and infected wound models. This work may provide an effective antibacterial platform for the selective imaging-guided treatment of bacterial infections.

Highly active iron-nitrogen-boron-carbon bifunctional electrocatalytic platform for hydrogen peroxide sensing and oxygen reduction

An iron-nitrogen-boron-carbon (Fe-N-B-C) bifunctional electrocatalyst was prepared by means of a facile one-step hydrothermal reduction of graphene oxide using dimethylamine borane as doping agent. In addition, hemins were efficiently anchored during doping/reducing process on this modified graphene. The as-prepared Fe-N-B-C electro-catalyst showed enhanced response as regards its potential for reduction of H₂O₂ and O₂. In view of its catalytic activity, this Fe-N-B-C material was tested for the determination of H₂O₂ with a chronoamperometry method, obtaining a detection limit as low as 0.055 μM, which is better than that of some Hemin-N-C materials. Regarding O₂ reduction reaction, a study performed using a rotating disk electrode indicated that this material exhibits a positive onset potential (0.90V vs. RHE), high selectivity (4e^- process), high limiting-current density (4.75 mA cm^-2) and strong resistance against the crossover-effect from methanol in alkaline medium, making it to be the promising candidate as alternative for commercial Pt/C catalysts. These results could have commercial and environmental relevance and would deserve further complementary investigation.

Micro-Bio-Chemo-Mechanical-Systems: Micromotors, Microfluidics, and Nanozymes for Biomedical Applications

Wireless nano-/micromotors powered by chemical reactions and/or external fields generate motive forces, perform tasks, and significantly extend short-range dynamic responses of passive biomedical microcarriers. However, before micromotors can be translated into clinical use, several major problems, including the biocompatibility of materials, the toxicity of chemical fuels, and deep tissue imaging methods, must be solved. Nanomaterials with enzyme-like characteristics (e.g., catalase, oxidase, peroxidase, superoxide dismutase), that is, nanozymes, can significantly expand the scope of micromotors' chemical fuels. A convergence of nanozymes, micromotors, and microfluidics can lead to a paradigm shift in the fabrication of multifunctional micromotors in reasonable quantities, encapsulation of desired subsystems, and engineering of FDA-approved core-shell structures with tuneable biological, physical, chemical, and mechanical properties. Microfluidic methods are used to prepare stable bubbles/microbubbles and capsules integrating ultrasound, optoacoustic, fluorescent, and magnetic resonance imaging modalities. The aim here is to discuss an interdisciplinary approach of three independent emerging topics: micromotors, nanozymes, and microfluidics to creatively: 1) embrace new ideas, 2) think across boundaries, and 3) solve problems whose solutions are beyond the scope of a single discipline toward the development of micro-bio-chemo-mechanical-systems for diverse bioapplications.

Nanozymes for Environmental Pollutant Monitoring and Remediation

Nanozymes are advanced nanomaterials which mimic natural enzymes by exhibiting enzyme-like properties. As nanozymes offer better structural stability over their respective natural enzymes, they are ideal candidates for real-time and/or remote environmental pollutant monitoring and remediation. In this review, we classify nanozymes into four types depending on their enzyme-mimicking behaviour (active metal centre mimic, functional mimic, nanocomposite or 3D structural mimic) and offer mechanistic insights into the nature of their catalytic activity. Following this, we discuss the current environmental translation of nanozymes into a powerful sensing or remediation tool through inventive nano-architectural design of nanozymes and their transduction methodologies. Here, we focus on recent developments in nanozymes for the detection of heavy metal ions, pesticides and other organic pollutants, emphasising optical methods and a few electrochemical techniques. Strategies to remediate persistent organic pollutants such as pesticides, phenols, antibiotics and textile dyes are included. We conclude with a discussion on the practical deployment of these nanozymes in terms of their effectiveness, reusability, real-time in-field application, commercial production and regulatory considerations.

N,N-dicarboxymethyl Perylene-diimide modified CeCoO3: Enhanced peroxidase activity, synergetic catalytic mechanism and glutathione colorimetric sensing

N,N-dicarboxymethyl Perylene-diimide (PDI) modified CeCoO₃ nanocomposites were prepared by a two-step method. After modification with PDI molecules, the obtained PDI-CeCoO₃ nanocomposites were demonstrated to possess the heightened peroxidase-like activity, compared with that of pure CeCoO₃ nanoparticles. In the presence of H₂O₂, the heightened peroxidase-like behaviors of PDI-CeCoO₃ were evaluated by the oxidation of the colorless substrate 3,3,5,5-tetramethylbenzidine (TMB) into blue oxTMB, which was detected visually only in 4 min. Importantly, a systematic study of catalytic activity of PDI-CeCoO₃ by different means, including fluorescent probe, electrochemical data, diffuse reflection spectra together with free radical scavenger is executed, verifying that the catalytic activity were from O₂^- and electron holes (h⁺). And, the transfer of photogenerated carriers in the PDI-CeCoO₃ was the Z-scheme heterojuntion mechanism. Furthermore, the peroxidase-like activity of PDI-CeCoO₃ was significantly inhibited by Glutathione (GSH), resulting in fading of blue oxTMB. Based on this, a colorimetric assay for GSH biosensing has been developed. And, the liner range for GSH detection is from 1 to 10 μM with a detection limit of 0.658 μM. The recovery of GSH with different concentrations from 90.0% to 105.9% and the relative standard deviation (RSD) from 1.9% to 5.1%. This colorimetric sensor can be used to detect GSH in real samples.

Degradation of Anthraquinone Dyes from Effluents: A Review Focusing on Enzymatic Dye Degradation with Industrial Potential

Up to 84 000 tons of dye can be lost in water, and 90 million tons of water are attributed annually to dye production and their application, mainly in the textile and leather industry, making the dyestuff industry responsible for up to 20% of the industrial water pollution. The majority of dyes industrially used today are aromatic compounds with complex, reinforced structures, with anthraquinone dyes being the second largest produced in terms of volume. Despite the progress on decolorization and degradation of azo dyes, very little attention has been given to anthraquinone dyes. Anthraquinone dyes pose a serious environmental problem as their reinforced structure makes them difficult to degrade naturally. Existing methods of decolorization might be effective but are neither efficient nor practical due to extended time, space, and cost requirements. Attention should be given to the emerging routes for dye decolorization via the enzymatic action of oxidoreductases, which have already a strong presence in various other bioremediation applications. This review will discusses the presence of anthraquinone dyes in the effluents and ways for their remediation from dyehouse effluents, focusing on enzymatic processes.

Enhancing the colorimetric detection of H2O2 and ascorbic acid on polypyrrole coated fluconazole-functionalized POMOFs

A new fluconazole-functionalized polyoxometalate-based metal-organic framework (POMOF) [Ag₃(FKZ)₂(H₂O)₂][H₃SiW₁₂O₄₀] (AgFKZSiW₁₂) was successfully constructed, and its polypyrrole (PPy) coated composite AgFKZSiW₁₂@PPy was also obtained via a facile 'in situ' oxidation polymerization process. The peroxidase-like activity evaluation indicates that the maximized synergistic effect from the integration of PPy, SiW₁₂ clusters, HFKZ drug molecules, and Ag ions deeply enhanced the overall performance. More importantly, AgFKZSiW₁₂@PPy exhibits the fastest response time (30 s) among all the reported peroxidase mimics to date, including the pristine AgFKZSiW₁₂ (2 min). Moreover, the AgFKZSiW₁₂@PPy-based colorimetric biosensing platform towards H₂O₂ and ascorbic acid (AA) exhibits limits of detection (LOD) as low as 0.12 μM and 2.7 μM, respectively. This work reveals a promising prospect in medical diagnosis and biotechnology for colorimetric biosensor fabrication with high performance through the introduction of PPy.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

Noninvasive photothermal cancer therapy nanoplatforms via integrating nanomaterials and functional polymers

In the cutting-edge field of cancer therapy, noninvasive photothermal therapy (PTT) has received great attention because it is considered to overcome the drawbacks of conventional surgery, radiotherapy and chemotherapy of severe body injuries and side effects on the immune system. The construction of PTT therapeutic and theranostic nanoplatforms is the key issue in achieving tumor targeting, imaging and therapy in a synergetic manner. In this review, we focus on the recent advances in constructing PTT therapeutic and theranostic nanoplatforms by integrating nanomaterials and functional polymers. The noninvasive photothermal cancer therapy mechanism and achievement strategies of PTT therapeutic and theranostic nanoplatforms are presented as well as the innovative construction strategies and perspectives for the future. Owing to their high tumor ablation efficiency, biological availability and low- or non-toxicity, PTT therapeutic and theranostic nanoplatforms are promising and emerging in medicine and clinical applications.

Ultrathin Polypyrrole Nanosheets via Space-Confined Synthesis for Efficient Photothermal Therapy in the Second Near-Infrared Window

Extensive efforts have been devoted to synthesizing photothermal agents (PTAs) that are active in the first near-infrared (NIR) region (650-950 nm). However, PTAs for photothermal therapy in the second NIR window (1000-1350 nm) are still rare. Here, it is shown that two-dimensional ultrathin polypyrrole (PPy) nanosheets prepared via a novel space-confined synthesis method could exhibit unique broadband absorption with a large extinction coefficient of 27.8 L g^-1 cm^-1 at 1064 nm and can be used as an efficient PTA in the second NIR window. This unique optical property is attributed to the formation of bipolaron bands in highly doped PPy nanosheets. The measured prominent photothermal conversion efficiency could achieve 64.6%, surpassing previous PTAs that are active in the second NIR window. Both in vitro and in vivo studies reveal that these ultrathin PPy nanosheets possess good biocompatibility and notable tumor ablation ability in the second NIR window. Our study highlights the potential of ultrathin two-dimensional polymers with unique optical properties in biomedical applications.

Protein-Directed Synthesis of Bifunctional Adsorbent-Catalytic Hemin-Graphene Nanosheets for Highly Efficient Removal of Dye Pollutants via Synergistic Adsorption and Degradation

Herein, for the first time, we report a "green", one-pot reduction/decoration method for the synthesis of bifunctional adsorbent-catalytic hemin-graphene nanosheets by using a common available protein (bovine serum albumin, BSA) as both a reductant and a stabilizer. Our prepared nanosheets are highly stable and possess intrinsic peroxidase-like catalytic activity due to the decoration of BSA and hemin. Furthermore, benefiting from the combined advantages of graphene and BSA, these nanosheets are able to efficiently adsorb dye pollutants from aqueous solution. More importantly, due to their adsorption and catalytic ability, these adsorbent-catalytic nanosheets can be applied to highly efficient dye removal via synergistic adsorption and degradation. Specifically, our catalysts can easily bring organic dyes to their surface by adsorption, and then activate H₂O₂ to generate hydroxyl radicals, leading to the degradation of the dyes. Such catalytic mechanism of our as-prepared nanosheets was analogous to that of natural enzymes, in which the extremely high catalytic efficiency is largely dependent upon their ability to bring substrates in close proximity to the active sites of enzymes. Our finding may open new potential applications of hemin-graphene hybrid nanosheets in environmental chemistry, biotechnology, and medicine.

Recent progress and development on polymeric nanomaterials for photothermal therapy: a brief overview

This review article summarizes the recent development and progress of polymeric photothermal agents for photothermal therapy and imaging-guided photothermal therapy applications.

Microwave-assisted synthesis of a viologen-based covalent organic polymer with redox-tunable polarity for dye adsorption

We report the efficient synthesis, by microwave-assisted Menshutkin reaction, of a viologen-based covalent organic polymer, and the application of its different redox state in dye removal.

A New Approach for Removing Anionic Organic Dyes from Wastewater Based on Electrostatically Driven Assembly

A conceptually new approach for an efficient removal of anionic organic dyes from wastewater using layered double hydroxides (LDHs) through their formation is presented. Acid yellow 25 (AY25) was used as anionic organic dye model molecules. As a result of the electrostatic induction, the removal mechanism involved a concurrent incorporation of AY25 molecules into the interlayer of LDHs during their structural arrangement, where Mg(2+) and Al(3+) ions were utilized to construct the base of LDHs in an alkaline solution. It was found that the molar stoichiometry of all precursors was a key factor affecting the removal efficiency. Within 5 min removal time, this method still maintained high removal efficiency of over 97% and provided a removal capacity of ∼186 mg g(-1), comparable to that of other LDH-based methods. Also, almost complete dye recovery was simply achieved by anionic exchange with common anions (Cl(-), NO3(-), and CO3(2-)). Additionally, the present technique is straightforward, cost-effective, and environmentally friendly since it avoids the synthesis step of sorbents, thus significantly saving time, chemicals, and energy. Hence, this strategy not only exhibits the alternative exploitation of LDHs, but also provides new insights into the removal of contaminants from wastewater.

Hollow ZrO2/PPy nanoplatform for improved drug delivery and real-time CT monitoring in synergistic photothermal-chemo cancer therapy

Hollow ZrO₂ nanospheres are fabricated to integrate polypyrrole and doxorubicin into one platform for synergistic photothermal-chemo therapy, and in vivo biodistribution is monitored by real-time CT imaging.

Near-IR responsive nanostructures for nanobiophotonics: emerging impacts on nanomedicine

Nanobiophotonics is an emerging field at the intersection of nanoscience, photonics, and biotechnology. Harnessing interactions of light with nanostructures enables new types of bioimaging, sensing, and light-activated therapy which can make a major impact on nanomedicine. Low penetration through tissue limits the use of visible light in nanomedicine. Near infrared (NIR) light (~780-1100 nm) can penetrate significantly further, enabling free-space delivery into deep tissues. This review focuses on interactions of NIR light with nanostructures to produce three effects: direct photoactivation, photothermal effects, and photochemical effects. Applications of direct photoactivation include bioimaging and biosensing using NIR-emitting quantum dots, materials with localized surface plasmon resonance (LSPR) in the NIR, and upconverting nanoparticles. Two key nanomedicine applications using photothermal effects are photothermal therapy (PTT), and photoacoustic (PA) imaging. For photochemical effects, we present the latest advances in in-situ upconversion and upconverting nanostructures for NIR activation of photodynamic therapy (PDT).

FROM THE CLINICAL EDITOR

Nanobiophotonics is a relatively new field applying light for the interactions with nanostructures, which can be used in bioimaging, sensing, and therapy. As near infrared (NIR) light (~780-1100 nm) can have better tissue penetration, its clinical potential is far greater. In this review, the authors discussed the latest research on the applications of NIR light in imaging and therapeutics.

l-cysteine induced manganese porphyrin electrocatalytic amplification with 3D DNA-Au@Pt nanoparticles as nanocarriers for sensitive electrochemical aptasensor

We successfully applied the novel l-cysteine (RSH) induced manganese porphyrin (MnTPP) electrocatalytic amplification in electrochemical aptasensor for detection of thrombin (TB) with the 3D DNA-Au@Pt nanoparticles (DNA-Au@Pt NPs) as nanocarrier. A further discussion for the suggested mechanism of the reaction involved the MnTPP-catalyzed oxidation of thiols (RSH) to disulfides l-cystine (RSSR) was also discussed in detail in this work. In comparison with traditional H2O2 mediated MnTPP electrocatalytic amplification, the novel reaction with more stable catalytic substrate RSH possessed high catalytic amplification efficiency. In addition, the 3D DNA-Au@Pt NPs could provide abundant binding sites for immobilizing signal tags and enzymes. As a result, the electrochemical signal can be greatly enhanced by the RSH mediated MnTPP electrocatalytic reaction and 3D DNA-Au@Pt NPs. Under optimal conditions, the proposed aptasensor exhibited a wider linear range of 0.1 pM-100 nM with a more sensitive detection limit of 29 fM for TB detection.

Stimuli responsive drug delivery application of polymer and silica in biomedicine

In the last decade, using polymer and mesoporous silica materials as efficient drug delivery carriers has attracted great attention.

Collagen nanofibers facilitated presynaptic maturation in differentiated neurons from spinal-cord-derived neural stem cells through MAPK/ERK1/2-Synapsin I signaling pathway

Neural stem cells (NSCs) are deemed to be a potential cell therapy for brain and spinal cord reconstruction and regeneration following injury. In this study, we investigated the role of nanofibrous scaffolds on NSCs-derived neurons in the formation of neural networks. Miniature excitatory postsynaptic currents (mEPSCs) were recorded using the whole-cell patch clamp recording method after the spinal cord-derived NSCs were differentiated into neurons and cultured in vitro for 10-14 days. It was observed that the frequency of mEPSCs in the differentiated neurons cultured on both randomly oriented and aligned collagen nanofibrous scaffolds was higher than that on the collagen-coated control and can be inhibited by an ERK inhibitor (PD98059), indicating that the collagen nanofibers affected the maturation of the synapses from presynaptic sites via the MAPK/ERK1/2 pathway. In addition, both of the collagen nanofibers increased the phosphorylation of Synapsin I and facilitated the interaction of p-ERK1/2 and p-Synapsin I. All these results suggested that the collagen nanofibrous scaffolds contributed to the presynaptic maturation via the ERK1/2-Synapsin I signaling pathway.

Hemin-block copolymer micelle as an artificial peroxidase and its applications in chromogenic detection and biocatalysis

Following an inspiration from the fine structure of natural peroxidases, such as horseradish peroxidase (HRP), an artificial peroxidase was constructed through the self-assembly of diblock copolymers and hemin, which formed a functional micelle with peroxidase-like activity. The pyridine moiety in block copolymer poly(ethylene glycol)-block-poly(4-vinylpyridine) (PEG-b-P4VP) can coordinate with hemin, and thus hemin is present in a five-coordinate complex with an open site for binding substrates, which mimics the microenvironment of heme in natural peroxidases. The amphiphilic core-shell structure of the micelle and the coordination interaction of the polymer to the hemin inhibit the formation of hemin μ-oxo dimers, and thereby enhance the stability of hemin in the water phase. Hemin-micelles exhibited excellent catalytic performance in the oxidation of phenolic and azo compounds by H2O2. In comparison with natural peroxidases, hemin-micelles have higher catalytic activity and better stability over wide temperature and pH ranges. Hemin-micelles can be used as a detection system for H2O2 with chromogenic substrates, and they anticipate the possibility of constructing new biocatalysts tailored to specific functions.