Effective immobilization of BMP-2 mediated by polydopamine coating on biodegradable nanofibers for enhanced in vivo bone formation

A New Capillary-Channel Agarose Sponge Assembled with Deep Eutectic Solvent Based Magnetic Fluid for Rapid Hemostasis and Prevention of Bacterial Infection

A new composite sponge assisted by magnetic field-mediated guidance was developed for effective hemostasis. It was based on polydopamine capillary-channel agarose (PDA-CAGA) sponge as matrix; meanwhile, the combination of deep eutectic solvent (DES, choline chloride:glycerol = 1:1, M/M)-dispersed Fe3O4 nanoparticles after fabrication by tannic acid (DES-Fe3O4@TA) was applied as hemostatic magnetic fluid. This sponge had oriented and aligned capillary channels realized by a 3D printed pattern, which endowed them with obvious shape memory and liquid absorption performance. Computational simulation was performed to describe the fluid status in channels; DES-Fe3O4@TA exhibited good magnetic properties, fluidity, and stability. In addition, the sponge driven to react rapidly with the bleeding site under the effect of a magnetic field presented a shorter hemostasis time (reduced by 85.02% in the tail and 81.07% in the liver of rats) and less blood loss (reduced by 97.08% in the tail and 91.50% in the liver) than those of medical gelatin sponge (GS). Meanwhile, the multifunctional material also exhibited better biocompatibility, procoagulant performance, and significant inhibition on S. aureus and E. coli than GS. As a whole, this work proposed a new strategy for rapid hemostasis by designing a magnetic field assisted composite bacteriostatic material, which also expanded the applications of green solvents in the clinical management field.

Growth factor-functionalized titanium implants for enhanced bone regeneration: A review

Titanium and titanium alloys are widely favored materials for orthopedic implants due to their exceptional mechanical properties and biological inertness. The additional benefit of sustained local release of bioactive substances further promotes bone tissue formation, thereby augmenting the osseointegration capacity of titanium implants and attracting increasing attention in bone tissue engineering. Among these bioactive substances, growth factors have shown remarkable osteogenic and angiogenic induction capabilities. Consequently, researchers have developed various physical, chemical, and biological loading techniques to incorporate growth factors into titanium implants, ensuring controlled release kinetics. In contrast to conventional treatment modalities, the localized release of growth factors from functionalized titanium implants not only enhances osseointegration but also reduces the risk of complications. This review provides a comprehensive examination of the types and mechanisms of growth factors, along with a detailed exploration of the methodologies used to load growth factors onto the surface of titanium implants. Moreover, it highlights recent advancements in the application of growth factors to the surface of titanium implants (Scheme 1). Finally, the review discusses current limitations and future prospects for growth factor-functionalized titanium implants. In summary, this paper presents cutting-edge design strategies aimed at enhancing the bone regenerative capacity of growth factor-functionalized titanium implants-a significant advancement in the field of enhanced bone regeneration.

A Periosteum-Bioinspired Electrospun Janus Membrane with Antibacterial and Osteogenic Dual Function

For a guided bone regeneration membrane, it is critical to possess osteogenic capability while inhibiting infection caused by bacteria. Inspired by the bilayer structure of the native periosteum, an electrospun Janus membrane with osteogenic and antibacterial dual-function is fabricated for guided bone regeneration. Hydrophilic moxifloxacin (MXF) and hydrophobic icariin (ICA) are loaded in the nanofibers made of a mixture of polycaprolactone and gelatin at the top and bottom layers, respectively, leading to the opposing hydrophilic/hydrophobic properties of the bilayer Janus membranes. The as-obtained Janus membrane exhibits excellent physical properties (tensile strength > 6.0 MPa) and robust biocompatibility, indicating the immense potential as a suitable replacement for the native periosteum. The membrane has a superior surface morphology and outstanding degradation performance in vitro. Besides, the rapid release of MXF and the slow release of ICA can meet the different needs of drug release rates. Only ≈30% ICA is released from the as-obtained Janus membrane after 21 d while almost 80% MXF is released. Mimicking the bilayer structure of the native periosteum, the electrospun Janus membrane containing ICA and MXF exhibits excellent comprehensive properties, which provides a promising strategy for preparing multifunctional scaffolds for tissue engineering.

Electrospun fibers modified with polydopamine for enhancing human mesenchymal stem cell culture

In this study, we coated electrospun polycaprolactone (PCL) fibers with polydopamine (PDA) to modify their hydrophobicity and fabricated a matrix for culturing mesenchymal stem cells (MSCs). Additionally, we incorporated Arg-Gly-Asp (RGD) peptides into PDA to enhance MSCs culture performance on PCL fibers. PDA and RGD were successfully coated in one step by immersing the electrospun fibers in a coating solution, without requiring an additional surface activation process. The characteristics of functionalized PCL fibers were analyzed by scanning electron microscopy with energy-dispersive x-ray analysis, Fourier transform infrared spectroscopy, water contact angle measurement, and fluorescence measurements using a carboxylic-modified fluorescent microsphere. MSCs cultured on the modified PCL fibers demonstrated enhanced cell adhesion, proliferation, and osteogenic- and chondrogenic differentiation. This study provides insight into potential applications for scaffold fabrication in MSCs-based tissue engineering, wound dressing, implantation, and a deeper understanding of MSCs behaviorin vitro.

Polydopamine-mediated immobilization of BMP-2 onto electrospun nanofibers enhances bone regeneration

Dealing with bone defects is a significant challenge to global health. Electrospinning in bone tissue engineering has emerged as a solution to this problem. In this study, we designed a PVDF-b-PTFE block copolymer by incorporating TFE, which induced a phase shift in PVDF fromαtoβ, thereby enhancing the piezoelectric effect. Utilizing the electrospinning process, we not only converted the material into a film with a significant surface area and high porosity but also intensified the piezoelectric effect. Then we used polydopamine to immobilize BMP-2 onto PVDF-b-PTFE electrospun nanofibrous membranes, achieving a controlled release of BMP-2. The scaffold's characters were examined using SEM and XRD. To assess its osteogenic effectsin vitro, we monitored the proliferation of MC3T3-E1 cells on the fibers, conducted ARS staining, and measured the expression of osteogenic genes.In vivo, bone regeneration effects were analyzed through micro-CT scanning and HE staining. ELISA assays confirmed that the sustained release of BMP-2 can be maintained for at least 28 d. SEM images and CCK-8 results demonstrated enhanced cell viability and improved adhesion in the experimental group. Furthermore, the experimental group exhibited more calcium nodules and higher expression levels of osteogenic genes, including COL-I, OCN, and RUNX2. HE staining and micro-CT scans revealed enhanced bone tissue regeneration in the defective area of the PDB group. Through extensive experimentation, we evaluated the scaffold's effectiveness in augmenting osteoblast proliferation and differentiation. This study emphasized the potential of piezoelectric PVDF-b-PTFE nanofibrous membranes with controlled BMP-2 release as a promising approach for bone tissue engineering, providing a viable solution for addressing bone defects.

Versatile Hydrogel Dressings That Dynamically Regulate the Healing of Infected Deep Burn Wounds

Severe burns threaten patient lives due to pain, inflammation, bacterial infection, and scarring. Most burn dressings that are commonly used perform a single function and are not well suited for the management of deep burns. Therefore, a multifunctional antimicrobial peptide- and stem cell-loaded macroporous hydrogel that can fight bacterial infection and regulate wound healing progression by temporally regulating cytokine production by internal stem cells is developed. The macroporous skeletal hydrogel is manufactured via the cryogenic gelation of hyaluronic acid (cryogel). Based on the oxidative polymerization reaction of dopamine, the antimicrobial peptide DP7 is immobilized on the surface of the cryogel (DA7CG). Placental mesenchymal stem cells (PMSCs) are then packaged inside the macroporous hydrogel (DA7CG@C). According to the results of in vitro and in vivo experiments, during the inflammatory phase, DP7 inhibits infection and modulates inflammation; during the proliferative phase, DA7CG@C accelerates the regeneration of skin, blood vessels, and hair follicles via internal stem cells; and during the remodeling phase, DA7CG@C contributes to extracellular matrix remodeling due to the ability of DP7 to regulate the paracrine secretion of PMSCs, synergistically promoting scar-free healing. DA7CG@C can participate in all phases of wound healing; therefore, it is a promising dressing for burn treatment.

In Vitro/In Vivo Preparation and Evaluation of cRGDyK Peptide-Modified Polydopamine-Bridged Paclitaxel-Loaded Nanoparticles

Cancer remains a disease with one of the highest mortality rates worldwide. The poor water solubility and tissue selectivity of commonly used chemotherapeutic agents contribute to their poor efficacy and serious adverse effects. This study proposes an alternative to the traditional physicochemically combined modifications used to develop targeted drug delivery systems, involving a simpler surface modification strategy. cRGDyK peptide (RGD)-modified PLGA nanoparticles (NPs) loaded with paclitaxel were constructed by coating the NP surfaces with polydopamine (PD). The average particle size of the produced NPs was 137.6 ± 2.9 nm, with an encapsulation rate of over 80%. In vitro release tests showed that the NPs had pH-responsive drug release properties. Cellular uptake experiments showed that the uptake of modified NPs by tumor cells was significantly better than that of unmodified NPs. A tumor cytotoxicity assay demonstrated that the modified NPs had a lower IC50 and greater cytotoxicity than those of unmodified NPs and commercially available paclitaxel formulations. An in vitro cytotoxicity study indicated good biosafety. A tumor model in female BALB/c rats was established using murine-derived breast cancer 4T1 cells. RGD-modified NPs had the highest tumor-weight suppression rate, which was higher than that of the commercially available formulation. PTX-PD-RGD-NPs can overcome the limitations of antitumor drugs, reduce drug toxicity, and increase efficacy, showing promising potential in cancer therapy.

Silica Replicas Derived from Mammalian Cells as an Innovative Approach to Physically Direct Cell Lineage Decisions of Mesenchymal Stem Cells

By means of a "live-cell" template strategy, silica replicas displaying the same morphology and topography of the mammalian cells used as templates are fabricated. The replicas are used as substrates to direct the differentiation of mesenchymal stem cells (MSCs) to predefined cell lineages. Upregulation of specific genes shows how the silica replica-based substrates have the ability to induce the molecular characteristics of the mature cell types from which they have been derived from. Thus, MSCs cultured in the presence of silica replicas of human osteoblasts (HObs) differentiate into HObs-like cells, as shown by the upregulation of specific osteogenic genes. Likewise, when MSCs are incubated with silica replicas derived from human chondrocytes, an enhanced expression of chondrogenic markers is observed. Importantly, the effects of the silica replicas are cell type-specific since the incubation of MSCs with HObs silica replicas does not result in upregulation of chondrogenic markers and vice versa. What is more, for both cases, the differentiation rate is enhanced when the silica replicas are used in combination with growth factors, suggesting a potential synergistic effect. These results demonstrate the potential of this innovative method as an efficient and cheap approach with the potential to eliminate, or at least reduce, the use of biochemically soluble compounds in stem cells research.

Applications of Polydopamine in Implant Surface Modification

There is great clinical demand for orthopedic and dental implant surface modification methods to prevent osseointegration failure and improve implant biological functions. Notably, dopamine (DA) can be polymerized to form polydopamine (PDA), which is similar to the adhesive proteins secreted by mussels, to form a stable bond between the bone surface and implants. Therefore, PDA has the potential to be used as an implant surface modification material with good hydrophilicity, roughness, morphology, mechanical strength, biocompatibility, antibacterial activity, cellular adhesion, and osteogenesis. In addition, PDA degradation releases DA into the surrounding microenvironment, which is found to play an important role in regulating DA receptors on both osteoblasts and osteoclasts during the bone remodeling process. Furthermore, the adhesion properties of PDA suggest its use as an intermediate layer in assisting other functional bone remodeling materials, such as nanoparticles, growth factors, peptides, and hydrogels, to form "dual modifications." The purpose of this review is to summarize the recent progress in research on PDA and its derivatives as orthopedic and dental implant surface modification materials and to analyze the multiple functions of PDA.

Biofabrication of functional bone tissue: defining tissue-engineered scaffolds from nature

Damage to bone leads to pain and loss of movement in the musculoskeletal system. Although bone can regenerate, sometimes it is damaged beyond its innate capacity. Research interest is increasingly turning to tissue engineering (TE) processes to provide a clinical solution for bone defects. Despite the increasing biomimicry of tissue-engineered scaffolds, significant gaps remain in creating the complex bone substitutes, which include the biochemical and physical conditions required to recapitulate bone cells' natural growth, differentiation and maturation. Combining advanced biomaterials with new additive manufacturing technologies allows the development of 3D tissue, capable of forming cell aggregates and organoids based on natural and stimulated cues. Here, we provide an overview of the structure and mechanical properties of natural bone, the role of bone cells, the remodelling process, cytokines and signalling pathways, causes of bone defects and typical treatments and new TE strategies. We highlight processes of selecting biomaterials, cells and growth factors. Finally, we discuss innovative tissue-engineered models that have physiological and anatomical relevance for cancer treatments, injectable stimuli gels, and other therapeutic drug delivery systems. We also review current challenges and prospects of bone TE. Overall, this review serves as guide to understand and develop better tissue-engineered bone designs.

Dual growth factor-modified microspheres nesting human-derived umbilical cord mesenchymal stem cells for bone regeneration

BACKGROUND

Modular tissue engineering (MTE) is a novel "bottom-up" approach that aims to mimic complex tissue microstructural features. The constructed micromodules are assembled into engineered biological tissues with repetitive functional microunits and form cellular networks. This is emerging as a promising strategy for reconstruction of biological tissue.

RESULTS

Herein, we constructed a micromodule for MTE and developed engineered osteon-like microunits by inoculating human-derived umbilical cord mesenchymal stem cells (HUMSCs) onto nHA/PLGA microspheres with surface modification of dual growth factors (BMP2/bFGF). By evaluating the results of proliferation and osteogenic differentiation ability of HUMSCs in vitro, the optimal ratio of the dual growth factor (BMP2/bFGF) combination was derived as 5:5. In vivo assessments showed the great importance of HUMSCs for osteogneic differentiation. Ultimately, direct promotion of early osteo-differentiation manifested as upregulation of Runx-2 gene expression. The vascularization capability was evaluated by tube formation assays, demonstrating the importance of HUMSCs in the microunits for angiogenesis.

CONCLUSIONS

The modification of growth factors and HUMSCs showed ideal biocompatibility and osteogenesis combined with nHA/PLGA scaffolds. The micromodules constructed in the current study provide an efficient stem cell therapy strategy for bone defect repair.

Gold nanorods with iron oxide dual-modal bioprobes in SERS-MRI enable accurate programmed cell death ligand-1 expression detection in triple-negative breast cancer

The efficiency of immunotherapy for triple-negative breast cancer (TNBC) is relatively low due to the difficulty in accurately detecting immune checkpoints. The detection of TNBC-related programmed cell death ligand-1 (PD-L1) expression is important to guide immunotherapy and improve treatment efficiency. Surface-enhanced Raman spectroscopy (SERS) and magnetic resonance (MR) imaging exhibit great potential for early TNBC diagnosis. SERS, an optical imaging mode, has the advantages of high detection sensitivity, good spatial resolution, and "fingerprint" spectral characteristics; however, the shallow detection penetration of SERS bioprobes limits its application in vivo. MR has the advantages of allowing deep penetration with no radiation; however, its spatial resolution needs to be improved. SERS and MR have complementary imaging features for tumor marker detection. In this study, gold nanorod and ultrasmall iron oxide nanoparticle composites were developed as dual-modal bioprobes for SERS-MRI to detect PD-L1 expression. Anti-PD-L1 (aPD-L1) was utilized to improve the targeting ability and specificity of PD-L1 expression detection. TNBC cells expressing PD-L1 were accurately detected via the SERS imaging mode in vitro, which can image at the single-cell level. In addition, bioprobe accumulation in PD-L1 expression-related tumor-bearing mice was simply and dynamically monitored and analyzed in vivo using MR and SERS. To the best of our knowledge, this is the first time a SERS-MRI dual-modal bioprobe combined with a PD-L1 antibody has been successfully used to detect PD-L1 expression in TNBC. This work paves the way for the design of high-performance bioprobe-based contrast agents for the clinical immunotherapy of TNBC.

Strontium Ion-Functionalized Nano-Hydroxyapatite/Chitosan Composite Microspheres Promote Osteogenesis and Angiogenesis for Bone Regeneration

Critical-size bone defects are an important problem in clinical practice, which usually occurs in severe trauma, or tumor resection, and cannot heal completely and autonomously. Implantation of grafts is often required to promote the regeneration of critical-size bone defects. Metal ions play an important role in human health, as they affect the body's metabolism and the tissue function. Strontium ions (Sr²⁺) can promote osteogenesis and angiogenesis. Herein, we prepared nano-hydroxyapatite (nHA)/chitosan (CS) composite microspheres with a uniform particle size distribution and an extracellular matrix-like nanofiber structure using microfluidic technology and direct alkali-induced gelation. Strontium ions were stably added into the microspheres by using polydopamine (PDA) to chelate metal ions forming a bone repair material (nHA/CS@PDA-Sr) with good bioactivity. The coordination reaction of PDA can effectively control the release of strontium ions and avoid the negative effects caused by the high strontium concentration. Our in vitro experiments showed that the composite microspheres had good biocompatibility and that the PDA coating promotes cell adhesion. The slow release of strontium ions can effectively promote mesenchymal stem cells osteogenic differentiation and the vascularization of endothelial cells. In addition, we injected composite microspheres into cranial defects of rats to evaluate osseointegration in vivo. The results showed that nHA/CS@PDA-Sr could effectively promote bone regeneration in the defect area. This study demonstrates that composite microspheres stimulate bone repair providing a promising way for bone-defect regeneration.

Bioactive peptides for boosting stem cell culture platform: Methods and applications

Peptides, short protein fragments, can emulate the functions of their full-length native counterparts. Peptides are considered potent recombinant protein alternatives due to their specificity, high stability, low production cost, and ability to be easily tailored and immobilized. Stem cell proliferation and differentiation processes are orchestrated by an intricate interaction between numerous growth factors and proteins and their target receptors and ligands. Various growth factors, functional proteins, and cellular matrix-derived peptides efficiently enhance stem cell adhesion, proliferation, and directed differentiation. For that, peptides can be immobilized on a culture plate or conjugated to scaffolds, such as hydrogels or synthetic matrices. In this review, we assess the applications of a variety of peptides in stem cell adhesion, culture, organoid assembly, proliferation, and differentiation, describing the shortcomings of recombinant proteins and their full-length counterparts. Furthermore, we discuss the challenges of peptide applications in stem cell culture and materials design, as well as provide a brief outlook on future directions to advance peptide applications in boosting stem cell quality and scalability for clinical applications in tissue regeneration.

A multifunctional nanocomposite coated with a BSA membrane for cascaded nitric oxide therapy

Gas therapy based on nitric oxide (NO) has emerged as a potential therapeutic approach for cancer, and in conjunction with multi-mode combination therapy, offers new possibilities for achieving significant hyperadditive effects. In this study, an integrated AI-MPDA@BSA nanocomposite for diagnosis and treatment was constructed for PDA based photoacoustic imaging (PAI) and cascade NO release. Natural NO donor L-arginine (L-Arg) and photosensitizer (PS) IR780 were loaded into mesoporous polydopamine (MPDA). Bovine serum albumin (BSA) was conjugated to the MPDA to increase the dispersibility and biocompatibility of the nanoparticles, as well as to serve as a gatekeeper controlling IR780 release from the MPDA pores. The AI-MPDA@BSA produced singlet oxygen (¹O₂) and converted it into NO through a chain reaction based on L-Arg, enabling a combination of photodynamic therapy and gas therapy. Moreover, due to the photothermal properties of MPDA, the AI-MPDA@BSA performed good photothermal conversion, which allowed photoacoustic imaging. As expected, both in vitro and in vivo studies have confirmed that the AI-MPDA@BSA nanoplatform has a significant inhibitory effect on cancer cells and tumors, and no apparent systemic toxicity or side effects were detected during the treatment period.

Functionalization of PCL-based nanofibers loaded with hirudin as blood contact materials

Blood-contacting materials with good mechanical property, excellent anticoagulant function and promoting effect on endothelialization are in great demand for clinical application such as vascular grafts in treating cardiovascular diseases. In this study, electrospinning nanofiber scaffolds of polycaprolactone (PCL) were functionalized by oxidative self-polymerization of dopamine (PDA) on the surface followed by the modification of anticoagulant recombinant hirudin (rH) molecules. The morphology, structure, mechanical property, degradation behavior, cellular compatibility and blood compatibility of the multifunctional PCL/PDA/rH nanofiber scaffolds were evaluated. The diameter of the nanofibers was between 270-1030 nm. The ultimate tensile strength of the scaffolds was around 4 MPa and the elastic modulus increased with the amount of rH. The degradation tests in vitro indicated that the nanofiber scaffolds began to crack on the 7th day, but still maintained the nanoscale architecture within a month. The cumulative release of rH from the nanofiber scaffold was up to 95.9 % at 30th day. The functionalized scaffolds promoted the adhesion and proliferation of endothelial cells, while resisting platelet adhesion and enhancing anticoagulation effects. The hemolysis ratios of all scaffolds were <2 %. The nanofiber scaffolds are promising candidates for vascular tissue engineering.

Evaluation of cell adhesion and osteoconductivity in bone substitutes modified by polydopamine

Bones damaged due to disease or accidents can be repaired in different ways. Tissue engineering has helped with scaffolds made of different biomaterials and various methods. Although all kinds of biomaterials can be useful, sometimes their weakness in cellular activity or osteoconductivity prevents their optimal use in the fabrication of bone scaffolds. To solve this problem, we need additional processes, such as surface modification. One of the common methods is coating with polydopamine. Polydopamine can not only cover the weakness of the scaffolds in terms of cellular properties, but it can also create or increase osteoconductivity properties. Polydopamine creates a hydrophilic layer on the surface of scaffolds due to a large number of functional groups such as amino and hydroxyl groups. This layer allows bone cells to anchor and adheres well to the surfaces. In addition, it creates a biocompatible environment for proliferation and differentiation. Besides, the polydopamine coating makes the surfaces chemically active by catechol and amine group, and as a result of their presence, osteoconductivity increases. In this mini-review, we investigated the characteristics, structure, and properties of polydopamine as a modifier of bone substitutes. Finally, we evaluated the cell adhesion and osteoconductivity of different polydopamine-modified bone scaffolds.

Artificial cilia for soft and stable surface covalent immobilization of bone morphogenetic protein-2

Preservation of growth factor sensitivity and bioactivity (e.g., bone morphogenetic protein-2 (BMP-2)) post-immobilization to tissue engineering scaffolds remains a great challenge. Here, we develop a stable and soft surface modification strategy to address this issue. BMP-2 (a model growth factor) is covalently immobilized onto homogeneous poly (glycidyl methacrylate) (PGMA) polymer brushes which are grafted onto substrate surfaces (Au, quartz glass, silica wafer, or common biomaterials) via surface-initiated atom transfer radical polymerization. This surface modification method multiplies the functionalized interfacial area; it is simple, fast, gentle, and has little effect on the loaded protein owing to the cilia motility. The immobilized BMP-2 (i-BMP-2) on the surface of homogeneous PGMA polymer brushes exhibits excellent bioactivity (⁓87% bioactivity of free BMP-2 in vitro and 20%-50% higher than scaffolds with free BMP-2 in vivo), with conformation and secondary structure well-preserved after covalent immobilization and ethanol sterilization. Moreover, the osteogenic activity of i-BMP-2 on the nanoline pattern (PGMA-poly (N-isopropylacrylamide)) shows ⁓110% bioactivity of free BMP-2. This is superior compared to conventional protein covalent immobilization strategies in terms of both bioactivity preservation and therapeutic efficacy. PGMA polymer brushes can be used to modify surfaces of different tissue-engineered scaffolds, which facilitates in situ immobilization of growth factors, and accelerates repair of a wide range of tissue types.

Bone Tissue Engineering Scaffolds: Function of Multi-Material Hierarchically Structured Scaffolds

Bone tissue engineering (BTE) is a topic of interest for the last decade, and advances in materials, processing techniques, and the understanding of bone healing pathways have opened new avenues of research. The dual responsibility of BTE scaffolds in providing load-bearing capability and interaction with the local extracellular matrix to promote bone healing is a challenge in synthetic scaffolds. This article describes the usage and processing of multi-materials and hierarchical structures to mimic the structure of natural bone tissues to function as bioactive and load-bearing synthetic scaffolds. The first part of this literature review describes the physiology of bone healing responses and the interactions at different stages of bone repair. The following section reviews the available literature on biomaterials used for BTE scaffolds followed by some multi-material approaches. The next section discusses the impact of the scaffold's structural features on bone healing and the necessity of a hierarchical distribution in the scaffold structure. Finally, the last section of this review highlights the emerging trends in BTE scaffold developments that can inspire new tissue engineering strategies and truly develop the next generation of synthetic scaffolds.

A critical review on polydopamine surface-modified scaffolds in musculoskeletal regeneration

Increasing concern about age-related diseases, particularly musculoskeletal injuries and orthopedic conditions, highlights the need for strategies such as tissue engineering to address them. Surface modification has been developed to create pro-healing interfaces, personalize scaffolds and provide novel medicines. Polydopamine, a mussel-inspired adhesive polymer with highly reactive functional groups that adhere to nearly all substrates, has gained attention in surface modification strategies for biomaterials. Polydopamine was primarily developed to modify surfaces, but its effectiveness has opened up promising approaches for further applications in bioengineering as carriers and nanoparticles. This review focuses on the recent discoveries of the role of polydopamine as a surface coating material, with focus on the properties that make it suitable for tackling musculoskeletal disorders. We report the evolution of using it in research, and discuss papers involving the progress of this field. The current research on the role of polydopamine in bone, cartilage, muscle, nerve, and tendon regeneration is discussed, thus giving comprehensive overview about the function of polydopamine both in-vitro and in-vivo. Finally, the report concludes presenting the critical challenges that must be addressed for the clinical translation of this biomaterial while exploring future perspectives and research opportunities in this area.

Dopamine/DOPAC-assisted immobilization of bone morphogenetic protein-2 loaded Heparin/PEI nanogels onto three-dimentional printed calcium phosphate ceramics for enhanced osteoinductivity and osteogenicity

Nowadays, the three-dimensional (3D) printed calcium phosphate (CaP) ceramics have well-designed geometric structure, but suffer from relative weak osteoinductivity. Surface modification by incorporating bone morphogenetic protein-2 (BMP2) onto scaffolds is considered as an efficient approach to improve their bioactivity. However, high dose and uncontrolled burst release of BMP2 may cause undesired side effect. In the present study, porous BCP ceramics with inverse face-centred cube structure prepared by digital light processing (DLP)-based 3D printing technique were used as the substrates. BMP2 proteins were loaded in the self-assembled Heparin/PEI nanogels (NP/BMP2), and then immobilized onto BCP substrates through the intermediate mussel-derived bioactive dopamine and dihydroxyphenylacetic acid (DA/DOPAC) coating layers to construct functional BCP/layer/NP/BMP2 scaffolds. Our results showed that Heparin/PEI nanogel was a potent delivery system for BMP2, and BCP/layer/NP/BMP2 scaffolds exhibited the high loading capacity, controlled release rate, and sustained local delivery of BMP2. In vitro cell experiments with bone marrow stromal cells (BMSCs) found that BCP/layer/NP/BMP2 could promote cell proliferation, facilitate cell spreading, accelerate cell migration, up-regulate expression of osteogenic genes, and improve synthesis of osteoblast-related proteins. Moreover, the murine intramuscular implantation model suggested that BCP/layer/NP/BMP2 had a superior osteoinductive capacity, and the rat femoral condyle defect repair model showed that BCP/layer/NP/BMP2 could enhance in situ bone repair and regeneration. These findings demonstrate that the incorporation of BMP2 loaded Heparin/PEI nanogels to 3D printed scaffolds holds great promise in fabricating bone graft with a superior biological performance for orthopedic application.

Surface polydopamine modification of bone defect repair materials: Characteristics and applications

Bone defects are a common challenge for clinical orthopedic surgeons. The existing bone defect repair materials are difficult to achieve satisfactory osseointegration between the material and the bone. Therefore, it is increasingly important to find effective methods to improve the integration of the materials with the bone and thus facilitate bone defect repair. Researchers have found that polydopamine (PDA) has a structure and properties similar to the adhesive proteins secreted by mussels in nature, with good biocompatibility, bioactivity, hydrophilicity, bio-adhesion and thermal stability. PDA is therefore expected to be used as a surface modification material for bone repair materials to improve the bonding of bone repair materials to the bone surface. This paper reviews research related to PDA-modified bone repair materials and looks at their future applications.

Environmental, Health, and Legislation Considerations for Rational Design of Nonreactive Flame-Retardant Additives for Polymeric Materials: Future Perspectives

Increasing polymer usage has demanded functional additives that decrease fire hazards for end users. While traditional flame-retardant (FR) additives, such as halogenated, phosphorus, and metal hydroxides, greatly reduce flammability and associated fire hazards, research has continually exposed a litany of health and environmental safety concerns. This perspective aims to identify the key components of a successful FR additive and address material, environmental, and health concerns of existing additives. Legislation surrounding FRs and persistent organic pollutants is also discussed to highlight political perception that has resulted in the increased chemical regulations and subsequent banning of FR additives. Finally, future directions of this field regarding nonreactive additives, focusing on the use of bioinspired materials and transition metal chemistries to produce alternatives for polymers with efficacies surpassing traditional additives are presented.

Metal Ion Augmented Mussel Inspired Polydopamine Immobilized 3D Printed Osteoconductive Scaffolds for Accelerated Bone Tissue Regeneration

Critical bone defects with a sluggish rate of auto-osteoconduction and imperfect reconstruction are motivators for the development of an alternate innovative approach for the regeneration of bone. Tissue engineering for bone regeneration signifies an advanced way to overcome this problem by creating an additional bone tissue substitute. Among different fabrication techniques, the 3D printing technique is obviously the most efficient and advanced way to fabricate an osteoconductive scaffold with a controlled porous structure. In the current article, the polycarbonate and polyester diol based polyurethane-urea (P12) was synthesized and 3D porous nanohybrid scaffolds (P12/TP-nHA) were fabricated using the 3D printing technique by incorporating the osteoconductive nanomaterial titanium phosphate adorned nanohydroxyapatite (TP-nHA). To improve the bioactivity, the surface of the fabricated scaffolds was modified with the immobilized biomolecule polydopamine (PDA) at room temperature. XPS study as well as the measurement of surface wettability confirmed the higher amount of PDA immobilization on TP-nHA incorporated nanohybrid scaffolds through the dative bone formation between the vacant d orbital of the incorporated titanium ion and the lone pair electron of the catechol group of dopamine. The incorporated titanium phosphate (TP) increased the tensile strength (53.1%) and elongation at break (96.8%) of the nanohybrid composite as compared to pristine P12. Moreover, the TP incorporated nanohybrid scaffold with calcium and phosphate moieties and a higher amount of immobilized active biomolecule improved the in vitro bioactivity, including the cell viability, cell proliferation, and osteogenic gene expression using hMSCs, of the fabricated nanohybrid scaffolds. A rat tibia defect model depicted that the TP incorporated nanohybrid scaffold with immobilized PDA enhanced the in vivo bone regeneration ability compared to the control sample without revealing any organ toxicity signifying the superior osteogenic bioactivity. Thus, a TP augmented polydopamine immobilized polyurethane-urea based nanohybrid 3D printed scaffold with improved physicochemical properties and osteogenic bioactivity could be utilized as an excellent advanced material for bone regeneration substitute.

Improvement of sciatic nerve regeneration by multichannel nanofibrous membrane-embedded electro-conductive conduits functionalized with laminin

Multichannel structures in the design of nerve conduits offer potential advantages for regeneration of damaged nerves. However, lack of biochemical cues and electrical stimulation could hamper satisfactory nerve regeneration. The aim of this study was to simultaneously evaluate the effects of topographical, biological, and electrical cues on sciatic nerve regeneration. Accordingly, a series of multichannel nerve conduit was made using longitudinally-aligned laminin-coated poly (lactic-co-glycolic acid) (PLGA)/carbon nanotubes (CNT) nanofibers (NF, mean diameter: 455 ± 362 nm) in the lumen and randomly-oriented polycaprolactone (PCL) NF (mean diameter: 340 ± 200 nm) on the outer surface. In vitro studies revealed that the materials were nontoxic and able to promote cell attachment and proliferation on nanofibers and on fibrin gel. To determine the influence of laminin as biological and CNT as electrical cues on nerve regeneration, either of hollow PCL conduits, PLGA NF-embedded, PLGA/CNT NF-embedded or laminin-coated PLGA/CNT NF-embedded PCL conduits were implanted in rats. A new surgery method was utilized and results were compared with an autograft. The results of motor and sensory tests in addition to histopathological examination of the regenerated nerves demonstrated the formation of nerve fibers in laminin-coated PLGA/CNT NF-embedded PCL conduits. Results suggested that these conduits have the potential to improve sciatic nerve regeneration. Graphical abstract.

Hydroxyapatite formation in biomimetic synthesis with the interface of a pDA@SIS membrane

Porcine decellularized small intestine submucosa (SIS) is a collagen membrane, which offers great potential as an organic substrate template in mineralization processes due to its good biodegradability and biocompatibility. However, a long period of mineralization and low efficiency are apparent, and the mechanism of collagen fiber mineralization has often been neglected in the previous literature. Thus, in this paper, we present a novel model of biomimetic collagen mineralization which uses dopamine (DA) molecules with the activating and retouching function of SIS collagen membranes and regulating collagen mineralization to construct the structure of mineralized collagen hard tissues. The crystal biomimetic mineralization growth of calcium phosphate on membranes is studied in different solid-liquid interfaces with a double ion self-assembled diffusion system under the simulated physiological microenvironment. In the system, pDA@SIS membranes are used to control the concentration of Ca²⁺ and PO₄ ^3- ionic diffusion to generate supersaturation reaction conditions in 1-14 days. The system can successfully obtain polycrystals with low crystallinity on the pDA-collagen complex template surface of collagen fibers and along the collagen fibers. It initiates a generalized bionic mineralization pathway which can reduce the nucleation interfacial energy to promote rapid hydroxyapatite (HAP) nucleation and crystallization and accelerate the rate of collagen fiber mineralization. The pDA@SIS mineralized collagen membrane shows good biocompatibility with 100% cellular activity in the CCK-8 test, which significantly improved the adhesion proliferation of MC3T3-E1 cells. The pDA-SIS collagen complex, as a new type of mineralization template, may propose a new collagen mineralization strategy to produce a mineralized pDA@SIS scaffold bone-like material for tissue engineering or can potentially be applied in bone repair and regeneration.

BMP-2 Modified Electrospun Scaffold for Acetabular Labral Reconstruction Promotes Collagen Fiber Regeneration in a Porcine Model

BACKGROUND

Acetabular labral tear is one of the contributing factors to early hip osteoarthritis. Patients with symptomatic labral tears may require surgical treatment, and labral reconstruction is indicated in cases of irreparable tears.

PURPOSE

The purpose of the study was to construct the bone morphogenic protein 2 (BMP-2) electrospun scaffold for acetabular labral reconstruction and analyze the composition of the labrum and the influence of collagen fiber distribution in regenerated tissue on the biomechanical properties of labrum.

STUDY DESIGN

Controlled laboratory study.

METHODS

Eighteen mature male miniature pigs were selected for labral reconstruction in vivo. The animals were divided into 3 groups, including the autologous tendon group (T group), dopamine/polylactic acid-polyethylene glycol (PELA) electrospun group (DP group), and dopamine/PELA electrospun/BMP-2 group (DPB group), and the native labra were used as the control group. The microstructure of the reconstructed labrum was analyzed by scanning electron microscopy. Histologic and immunohistochemistry sections were used to evaluate the composition and structure of reconstructed labrum. The related gene expression was tested via quantitative reverse transcriptase-polymerase chain reaction test. The compressive and tensile properties of tissues were evaluated using the elasticity test device.

RESULTS

Hematoxylin and eosin staining showed that the DP group and the T group were mainly composed of fibroblasts. The alignment of fibers was irregular. In the DPB group, the reconstructed tissues were composed of fibroblasts and chondrocytes, with parallel fibers and denser structure. The native labrum was composed of a large number of fibroblasts, which were arranged orderly and parallel, and there was almost no vascular proliferation. Under scanning electron microscopy, the reconstructed tissue of the DBP group was more similar to the native labral structure, forming a denser, clear-layered collagen fibrous structure, while the fiber alignment of the DP and T groups was irregular. The contents of type I, II, and III collagen (COL1, COL2, and COL3, respectively) were upregulated in labrum reconstructed with the DPB scaffold, while the gene expressions did not increase in the DP and T groups. The tensile and compressive properties of the implants in the DPB group were significantly enhanced.

CONCLUSION

BMP-2 modified electrospun scaffold promotes collagen regeneration and osteogenic differentiation and is associated with better biomechanical performance of the reconstructed labrum.

CLINICAL RELEVANCE

This study demonstrated that BMP-2 modified electrospun scaffold could induce the regeneration of collagen and osteogenic differentiation and provide better biomechanical performance in labral reconstruction. This scaffold could be used in clinical practice after further improvement.

Polydopamine-coated polycaprolactone/carbon nanotubes fibrous scaffolds loaded with brain-derived neurotrophic factor for peripheral nerve regeneration

Carbon nanotubes (CNTs) have attracted increasing attention in the field of peripheral nerve tissue engineering owing to their unique structural and physical characteristics. In this study, a novel type of aligned conductive scaffolds composed of polycaprolactone (PCL) and CNTs were fabricated via electrospinning. Utilizing the mussel-inspired polydopamine (PDA) surface modification, brain-derived neurotrophic factor (BDNF) was loaded onto PCL/CNTs fibrous scaffolds to obtain PCL/CNTs-PDA-BDNF fibrous scaffolds capable of the sustained release of BDNF over 28 days. Schwann cells were cultured on these scaffolds, and the effects of the scaffolds on peripheral nerve regeneration in vitro were assessed by studying cell proliferation, morphology and the expressions of myelination-related genes S100, P0 and myelin basic protein (MBP). Furthermore, the effects of these scaffolds on peripheral nerve regeneration in vivo were investigated using a 10-mm rat sciatic nerve defect model. Both the in vitro and in vivo results indicated that PCL/CNTs-PDA-BDNF fibrous scaffolds could effectively promote sciatic nerve regeneration and functional recovery. Therefore, PCL/CNTs-PDA-BDNF fibrous scaffolds have great potential for peripheral nerve restoration.

A ‘Relay’-Type Drug-Eluting Nerve Guide Conduit: Computational Fluid Dynamics Modeling of the Drug Eluting Efficiency of Various Drug Release Systems

Nerve guidance conduits (NGCs) are tubular scaffolds that act as a bridge between the proximal and distal ends of the native nerve to facilitate the nerve regeneration. The application of NGCs is mostly limited to nerve defects less than 3 mm due to the lack of sufficient cells in the lumen. The development of drug-release-system-embedded NGCs has the potential to improve the nerve regeneration performance by providing long-term release of growth factors. However, most of the past works only focused on one type of drug release system, limiting the variation in drug release system types and features. Therefore, in this study, computer-aided design (CAD) models were constructed and Computational Fluid Dynamics (CFD) simulations were carried out to investigate the effect of growth factor transporting efficiency on different drug release systems. To overcome the challenges posed by the current NGCs in treating long nerve gap injuries (>4 cm), a novel ‘relay’ NGC design is first proposed in this paper and has the potential to improve the nerve regeneration performance to next level. The intermediate cavities introduced along the length of the multi-channel NGCs act as a relay to further enhance the cell concentrations or growth factor delivery as well as the regeneration performance. Four different drug release systems, namely, a single-layer microsphere system, a double-layer microsphere system, bulk hydrogel, and hydrogel film, were chosen for the simulation. The results show that the double-layer microsphere system achieves the highest growth factor volume fraction among all the drug release systems. For the single-layer microsphere system, growth factor concentration can be significantly improved by increasing the microsphere quantities and decreasing the diameter and adjacent distance of microspheres. Bulk hydrogel systems hold the lowest growth factor release performance, and the growth factor concentration monotonically increased with the increase of film thickness in the hydrogel film system. Owing to the easy fabrication of hydrogel film and the even distribution of growth factors, the hydrogel film system can be regarded as a strong candidate in drug-eluting NGCs. The use of computational simulations can be regarded as a guideline for the design and application of drug release systems, as well as a promising tool for further nerve tissue engineering study.

Polydopamine treatment of chitosan nanofibers for the conception of osteoinductive scaffolds for bone reconstruction

We report the influence of treatment time of electrospun chitosan nanofibers (CHT NFs) in dopamine hydrochloride bath (2 mg.mL^-1 in 10 mM Tris buffer, pH 8.5) on the extent of the polydopamine (pDA) coating on NFs surface. The reaction was characterized by FTIR and SEM analysis and the cytocompatibility of the scaffolds toward MT3C3-E1 cells was assessed. Biomimetic deposition of hydroxyapatite (HA) in 1.5xSBF batch was investigated by SEM-EDS and XRD. Samples treated in dopamine bath during 2 h promoted the structural stability of NFs in PBS, provided optimal cytocompatibility and induced the in vitro biomineralization from 6 days in 1.5xSBF. The XRD and SEM-EDS investigations confirmed formation of spherical-shaped particles composed of apatitic phase. Finally, this study shows that these NFs-pDA scaffolds prepared in the optimal experimental conditions defined here are promising candidates for application as osteoinductive scaffolds for bone regeneration applied to orthopedic and dental applications.

Engineering immunomodulatory and osteoinductive implant surfaces via mussel adhesion-mediated ion coordination and molecular clicking

Immune response and new tissue formation are important aspects of tissue repair. However, only a single aspect is generally considered in previous biomedical interventions, and the synergistic effect is unclear. Here, a dual-effect coating with immobilized immunomodulatory metal ions (e.g., Zn²⁺) and osteoinductive growth factors (e.g., BMP-2 peptide) is designed via mussel adhesion-mediated ion coordination and molecular clicking strategy. Compared to the bare TiO₂ group, Zn²⁺ can increase M2 macrophage recruitment by up to 92.5% in vivo and upregulate the expression of M2 cytokine IL-10 by 84.5%; while the dual-effect of Zn²⁺ and BMP-2 peptide can increase M2 macrophages recruitment by up to 124.7% in vivo and upregulate the expression of M2 cytokine IL-10 by 171%. These benefits eventually significantly enhance bone-implant mechanical fixation (203.3 N) and new bone ingrowth (82.1%) compared to the bare TiO₂ (98.6 N and 45.1%, respectively). Taken together, the dual-effect coating can be utilized to synergistically modulate the osteoimmune microenvironment at the bone-implant interface, enhancing bone regeneration for successful implantation.

Immune response and new tissue formation are important aspects of tissue repair but often only one aspect is considered in biomedical interventions. Here, the authors report on the use of a mussel-like surface coating to immobilize immune modulating metal ions and growth factors and demonstrated improved in vivo outcomes.

Recent developments on bismuth oxyhalide-based functional nanomaterials for biomedical applications

Multifunctional bismuth oxyhalide (BiOX, X = F, Cl, Br, and I) nanomaterials have great potential advantages in medical diagnostic and therapeutic applications. Pure BiOX nanomaterials have some limitations such as...

Directed Regeneration of Osteochondral Tissue by Hierarchical Assembly of Spatially Organized Composite Spheroids

The use of engineered scaffolds or stem cells is investigated widely in the repair of injured musculoskeletal tissue. However, the combined regeneration of hierarchical osteochondral tissue remains a challenge due to delamination between cartilage and subchondral bone or difficulty in spatial control over differentiation of transplanted stem cells. Here, two types of composite spheroids are prepared using adipose-derived stem cells (hADSCs) and nanofibers coated with either transforming growth factor-β3 or bone morphogenetic growth factor-2 for chondrogenesis or osteogenesis, respectively. Each type of spheroid is then cultured within a 3D-printed microchamber in a spatially arranged manner to recapitulate the bilayer structure of osteochondral tissue. The presence of inductive factors regionally modulates in vitro chondrogenic or osteogenic differentiation of hADSCs within the biphasic construct without dedifferentiation. Furthermore, hADSCs from each spheroid proliferate and sprout and successfully connect the two layers mimicking the osteochondral interface without apertures. In vivo transplantation of the biphasic construct onto a femoral trochlear groove defect in rabbit knee joint results in 21.2 ± 2.8% subchondral bone volume/total volume and a cartilage score of 25.0 ± 3.7. The present approach can be an effective therapeutic platform to engineer complex tissue.

Polydopamine Coating-Mediated Immobilization of BMP-2 on Polyethylene Terephthalate-Based Artificial Ligaments for Enhanced Bioactivity

Background/objectives: Polyethylene terephthalate (PET)-based artificial ligaments are one of the most commonly used grafts in anterior cruciate ligament (ACL) reconstruction surgery. However, the lack of favorable hydrophilicity and cell attachment for PET highly impeded its widespread application in clinical practice. Studies found that surface modification on PET materials could enhance the biocompatibility and bioactivity of PET ligaments. In this study, we immobilized bone morphogenetic protein-2 (BMP-2) on the surface of PET ligaments mediated by polydopamine (PDA) coating and investigated the bioactivation and graft-to-bone healing effect of the modified grafts in vivo and in vitro.

Methods: In this study, we prepared the PDA coating and subsequent BMP-2-immobilized PET artificial ligaments. Scanning electron microscopy (SEM) was used to analyze the morphological changes of the modified grafts. In addition, the surface wettability properties of the modified ligaments, amount of immobilized BMP 2, and the release of BMP-2 during a dynamic period up to 28 days were tested. Then, the attachment and proliferation of rat bone mesenchymal stem cells (rBMSCs) on grafts were examined by SEM and Cell Counting Kit-8 (CCK-8) assay, respectively. Alkaline phosphatase (ALP) assay, RT-PCR, and Alizarin Red S staining were performed to test the osteoinduction property. For in vivo experiments, an extra-articular graft-to-bone healing model in rabbits was established. At 8 weeks after surgery, biomechanical tests, micro-CT, and histological staining were performed on harvested samples.

Results: A surface morphological analysis verified the success of the PDA coating. The wettability of the PET artificial ligaments was improved, and more than 80% of BMP-2 stably remained on the graft surface for 28 days. The modified grafts could significantly enhance the proliferation, attachment, as well as expression of ALP and osteogenic-related genes, which demonstrated the favorable bioactivity of the grafts immobilized with BMP-2 in vitro. Moreover, the grafts immobilized with BMP-2 at a concentration of 138.4 ± 10.6 ng/cm² could highly improve the biomechanical properties, bone regeneration, and healing between grafts and host bone after the implantation into the rabbits compared with the PDA-PET group or the PET group.

Conclusion: The immobilization of BMP-2 mediated by polydopamine coating on PET artificial ligament surface could enhance the compatibility and bioactivity of the scaffolds and the graft-to-bone healing in vivo.

Synergic adhesive chemistry-based fabrication of BMP-2 immobilized silk fibroin hydrogel functionalized with hybrid nanomaterial to augment osteogenic differentiation of rBMSCs for bone defect repair

Bone defect repair and tissue engineering is specifically challenging process because of the distinctive morphological and structural behaviours of natural bone with complex healing and biochemical mechanisms. In the present investigation, we designed dopamine adhesive chemistry-based fabrication of silk fibroin hydrogel (SFD) with incorporation of nano-hydroxyapatite (nHA)-graphene oxide (GO) hybrid nanofillers with well-arranged porous morphology immobilized with bone morphogenic protein-2 (BMP-2) for the effective in vitro rabbit bone marrow derived mesenchymal stem cells loading compatibility and in vivo new bone regrowth and collagen deposition ability. We have achieved bone-specific hydrogel scaffolds with upgraded structural features, mechanical properties and particularly promoted in vitro osteogenic differentiation and compatibility of rabbit bone marrow mesenchymal stem cells (rBMSCs). Structural and microscopic analyses established greater distributions of components and well-ordered and aligned porous structure of the hydrogel network. In vivo result of new bone regrowth was promisingly higher in the Bm@nHG-SFD hydrogel (85%) group as compared to the other treatment groups of nHG-SFD (77%) and nH-SFD (64%) hydrogel. Overall, we summarized that morphologically improved hydrogel material with immobilization of BMP-2 could be have more attentions for new generation bone regeneration therapies.

Fabrication of 3D Printed Poly(lactic acid)/Polycaprolactone Scaffolds Using TGF-β1 for Promoting Bone Regeneration

Our research was designed to evaluate the effect on bone regeneration with 3-dimensional (3D) printed polylactic acid (PLA) and 3D printed polycaprolactone (PCL) scaffolds, determine the more effective option for enhancing bone regeneration, and offer tentative evidence for further research and clinical application. Employing the 3D printing technique, the PLA and PCL scaffolds showed similar morphologies, as confirmed via scanning electron microscopy (SEM). Mechanical strength was significantly higher in the PLA group (63.4 MPa) than in the PCL group (29.1 MPa) (p < 0.01). Average porosity, swelling ratio, and degeneration rate in the PCL scaffold were higher than those in the PLA scaffold. SEM observation after cell coculture showed improved cell attachment and activity in the PCL scaffolds. A functional study revealed the best outcome in the 3D printed PCL-TGF-β₁ scaffold compared with the 3D printed PCL and the 3D printed PCL-Polydopamine (PDA) scaffold (p < 0.001). As confirmed via SEM, the 3D printed PCL- transforming growth factor beta 1 (TGF-β₁) scaffold also exhibited improved cell adhesion after 6 h of cell coculture. The 3D printed PCL scaffold showed better physical properties and biocompatibility than the 3D printed PLA scaffold. Based on the data of TGF-β₁, this study confirms that the 3D printed PCL scaffold may offer stronger osteogenesis.

Exposure to polydopamine nanoparticles induces neurotoxicity in the developing zebrafish

Currently, the potential applications of polydopamine (PDA) nanoparticles in the biomedical field are being extensively studied, such as cell internalization, biocompatible surface modification, biological imaging, nano-drug delivery, cancer diagnosis, and treatment. However, the subsequent toxicological response to PDA nanoparticles, especially on nervous system damage was still largely unknown. In this regard, the evaluation of the neurotoxicity of PDA nanoparticles was performed in the developing zebrafish larvae. Results of the transmission electron microscope (TEM), diameter analysis, ¹H NMR, and thermogravimetric analysis (TGA) indicated that PDA nanoparticles had high stability without any depolymerization; the maximum non-lethal dose (MNLD) and LD₁₀ of PDA nanoparticles for zebrafish were determined to be 0.5 mg/mL and 4 mg/mL. Pericardial edema and uninflated swim bladders were observed in zebrafish larvae after exposure to PDA nanoparticles. At a concentration higher than MNLD, the fluorescence images manifested that the PDA nanoparticles could inhibit the axonal growth of peripheral motor neurons in zebrafish, which might affect the movement distances and speed, disturb the movement trace, finally resulting in impaired motor function. However, in further investigating the mechanism of PDA nanoparticles-induced neurotoxicity in zebrafish larvae, we did not find apoptosis of central neurocytes. Our data suggested that PDA nanoparticles might trigger neurotoxicity in zebrafish, which could provide an essential clue for the safety assessment of PDA nanoparticles.

Near-Infrared Light-Regulated Drug-Food Homologous Bioactive Molecules and Photothermal Collaborative Precise Antibacterial Therapy Nanoplatform with Controlled Release Property

Herein, a collaborative precise antibacterial wound healing therapy nanoplatform integrating drug-food homologous bioactive molecule (cinnamaldehyde, CA) with photothermal therapy (PTT) is presented. Copper-gallic acids-cinnamaldehyde-polydopamine nanorods (Cu-GA-CA-PDA NRs) with near-infrared light (NIR)-controlled CA release property are fabricated, which also integrate CA and photothermal synergistic sterilization, as well as antioxidant, anti-inflammatory, and anti-infection capacities. The characteristics of NIR-mediated CA release and photothermal response of Cu-GA-CA-PDA NRs support their excellent sterilization performance in vitro/in vivo. In addition, under the guidance of NIR, Cu-GA-CA-PDA NRs can hinder the formation of inflammatory cells, reduce oxidative stress damage, accelerate the regeneration of skin tissues in S. aureus-infected wound sites, and achieve the goal of promoting wound healing. Therefore, NIR-mediated Cu-GA-CA-PDA NRs with multifunctional biological activities provide a highly competitive strategy for curing bacteria-infected wounds.

Rapid and sensitive detection of Staphylococcus aureus and Klebsiella pneumonia based on bacitracin-modified Fe3O4@PDA magnetic beads combined with matrix-assisted laser desorption ionization-time of flight mass spectrometry

The highly effective detection of pathogens in complex biological samples is an attractive and critical topic of study. Bacitracin is a novel broad-spectrum antimicrobial peptide to enrich bacteria via interactions with the membrane surface of the different bacterial cells. In this study, for the first time, bacitracin was immobilized on the surface of Fe3O4@PDA magnetic nanoparticles for the enrichment of Staphylococcus aureus (G+) and Klebsiella pneumoniae (G-). Combined with matrix-assisted laser desorption ionization time-of-flight mass spectrometry, a rapid and sensitive detection method for these two bacteria was developed. In this method, the detectable concentration of bacteria was decreased by 2-3 orders of magnitude in unenriched samples. The enrichment and identification can be completed in one hour. All these results demonstrated that the bacitracin-functionalized magnetic composite has potential for use in the large-scale enrichment and isolation of target pathogens from complex biological samples, opening a new avenue for the rapid and sensitive detection of pathogens.

Electrospun hydrogels for dynamic culture systems: advantages, progress, and opportunities

The extracellular matrix (ECM) is a water-swollen, tissue-specific material environment in which biophysiochemical signals are organized and influence cell behaviors. Electrospun nanofibrous substrates have been pursued as platforms for tissue engineering and cell studies that recapitulate features of the native ECM, in particular its fibrous nature. In recent years, progress in the design of electrospun hydrogel systems has demonstrated that molecular design also enables unique studies of cellular behaviors. In comparison to the use of hydrophobic polymeric materials, electrospinning hydrophilic materials that crosslink to form hydrogels offer the potential to achieve the water-swollen, nanofibrous characteristics of endogenous ECM. Although electrospun hydrogels require an additional crosslinking step to stabilize the fibers (allowing fibers to swell with water instead of dissolving) in comparison to their hydrophobic counterparts, researchers have made significant advances in leveraging hydrogel chemistries to incorporate biochemical and dynamic functionalities within the fibers. Consequently, dynamic biophysical and biochemical properties can be engineered into hydrophilic nanofibers that would be difficult to engineer in hydrophobic systems without strategic and sometimes intensive post-processing techniques. This Review describes common methodologies to control biophysical and biochemical properties of both electrospun hydrophobic and hydrogel nanofibers, with an emphasis on highlighting recent progress using hydrogel nanofibers with engineered dynamic complexities to develop culture systems for the study of biological function, dysfunction, development, and regeneration.

Universal Surface Coating with a Non-Phenolic Molecule, Sulfonated Pyrene

Nature-inspired small molecules such as catecholamines and polyphenols have gained a great deal of attention because of the exceptional surface-coating property that is applicable to many diverse substrates. Many researchers have conducted studies to expand molecular pools with surface-coating properties, but previous reports have still been limited to phenolic molecules as surface-coating agents. In this study, we describe for the first time the material-independent coating properties of nonphenolic molecules, namely, sulfonated pyrenes with Zr^IV ions. Owing to the binding capability with several oxygen-containing ligands, Zr^IV can be used for the molecular assembly of sulfonated pyrenes. We also report on the mixing of multiple sulfonated pyrenes and Zr^IV results in cross-linked complexes that can coat diverse solid substrates. The resulting coating can serve as a platform for grafting functional polysaccharides.

Recent Progress on Biodegradable Tissue Engineering Scaffolds Prepared by Thermally-Induced Phase Separation (TIPS)

Porous biodegradable scaffolds provide a physical substrate for cells allowing them to attach, proliferate and guide the formation of new tissues. A variety of techniques have been developed to fabricate tissue engineering (TE) scaffolds, among them the most relevant is the thermally-induced phase separation (TIPS). This technique has been widely used in recent years to fabricate three-dimensional (3D) TE scaffolds. Low production cost, simple experimental procedure and easy processability together with the capability to produce highly porous scaffolds with controllable architecture justify the popularity of TIPS. This paper provides a general overview of the TIPS methodology applied for the preparation of 3D porous TE scaffolds. The recent advances in the fabrication of porous scaffolds through this technique, in terms of technology and material selection, have been reviewed. In addition, how properties can be effectively modified to serve as ideal substrates for specific target cells has been specifically addressed. Additionally, examples are offered with respect to changes of TIPS procedure parameters, the combination of TIPS with other techniques and innovations in polymer or filler selection.

Capability of core-sheath polyvinyl alcohol-polycaprolactone emulsion electrospun nanofibrous scaffolds in releasing strontium ranelate for bone regeneration

Core-sheath nanofibrous scaffolds from polyvinyl alcohol (PVA)-strontium ranelate (SrR)-Polycaprolactone (PCL) were prepared by water in oil electrospinning method. Thus, PCL (the oil phase) was used as the shell part and a mixture of PVA and SrR (the water phase) was inserted in the core. The amounts of SrR was varied from 0 to 15 wt.% Mussel-inspired dopamine-gelatin coating was done on the nanofibrous to improve their hydrophilicity and cellular attachment. The effect of the SrR content on morphology, mechanical, physicochemical, in vitro release behaviors, and biological properties as well as in vivo bone regeneration was investigated. Morphological observations revealed that continuous nanofibers with a core/shell structure were successfully obtained and the fibers diameter increased as the SrR content rose. X-ray diffraction (XRD) analysis revealed that SrR was molecularly distributed in the nanofibers and increasing the amount of the SrR decreased the crystallinity of the nanofibers. Moreover, the SrR release was regulated through the mechanism of Fickian diffusion and it was assumed as fast as possible in the samples with higher SrR content. The mesenchymal stem cell culturing showed improved cell proliferation by adding SrR and accelerating the expression of ALP, Runx2, Col I, and OCN genes. Besides, the SrR-loaded nanofibers improved bone formation of calvarial defects in a rat model as revealed by in vivo investigations.

Surface modification of a three-dimensional polycaprolactone scaffold by polydopamine, biomineralization, and BMP-2 immobilization for potential bone tissue applications

Three-dimensional (3D) bioprinting is a free-form fabrication technique enabling fine feature control for tissue engineering applications. Especially, 3D scaffolds capable of supporting cell attachment, proliferation, and osteogenic differentiation are a prerequisite for bone tissue regeneration. Herein, we elaborated this approach to produce a 3D polycaprolactone (PCL) scaffold with long-term osteogenic activity. Specifically, we coated polydopamine (PDA) on 3D PCL scaffolds, subsequently deposited hydroxyapatite (HA) nanoparticles via biomimetic mineralization, and finally immobilized bone morphogenetic protein-2 (BMP-2). Material properties were characterized and compared with various 3D scaffolds, including PCL, PDA-coated PCL (PCL/PDA), and PDA-coated and HA-deposited PCL (PCL/PDA/HA). In vitro cell culture studies with osteoblasts revealed that the PCL/PDA/HA scaffolds immobilized with BMP-2 showed long-term retention of BMP-2 (for up to 21 days) and significantly increased osteoblast proliferation and osteogenic differentiation, as evidenced by metabolic activity, alkaline phosphatase activity, and calcium deposition. We believe that this multifunctional osteogenic 3D scaffold will be useful for bone tissue engineering applications.

Bone morphogenetic protein-2 delivery from polyelectrolyte multilayers enhances osteogenic activity on nanostructured titania

Incomplete osseointegration is primary cause of failure for orthopedic implants. New biomaterials that present stable signals promoting osteogenesis could reduce failure rates of orthopedic implants. In this study bone morphogenetic protein-2 (BMP-2) was delivered from titania nanotubes (Nt) modified with chitosan/heparin polyelectrolyte multilayers (PEMs). The surfaces were characterized by scanning electron microscopy and X-ray photoelectron spectroscopy. BMP-2 release from the surfaces was measured in vitro for up to 28 days. After an initial burst release of BMP-2 during the first 2 days, most of the BMP-2 remained on the surface. To determine the osteogenic properties of these surfaces, they were seeded with rat bone marrow cells; alkaline phosphatase (ALP) activity, total protein, calcium deposition, and osteocalcin were measured up to 4 weeks in vitro. When compared to Nt surfaces, the surfaces with BMP-2 induce greater osteocalcin and calcium deposition. PEMs provide sustained presentation of BMP-2, from a biomimetic surface. This enhances the osteogenic properties of the surface without requiring supraphysiologic growth factor dose. This growth factor delivery strategy could be used to improve bone healing outcomes and reduce complications for recipients of orthopedic implants.

Electrospun Fibers Immobilized with BMP-2 Mediated by Polydopamine Combined with Autogenous Tendon to Repair Developmental Dysplasia of the Hip in a Porcine Model

Purpose

Developmental dysplasia of the hip (DDH) can increase the pressure between the joints, which causes secondary hip osteoarthritis. The aim of the present study was to fabricate poly(D, L-lactic acid)-poly(ethylene glycol)-poly(D, L-lactic acid) (PELA) electrospun fibrous scaffolds, immobilized with bone morphogenetic protein-2 (BMP-2), to repair the acetabulum defects.

Methods

The characteristics of PELA electrospun were analyzed using scanning electron microscopy, the release kinetics of BMP-2 in vitro were analyzed using enzyme-linked immunosorbent assays. Human mesenchymal stem cells (hMSCs) were used for in vitro experiments, the biocompatibility of the electrospinning materials was investigated using a cell counting kit-8 (CCK-8) kit, and osteogenic differentiation was tested via alkaline phosphatase (ALP) activity and relative gene expression. Eighteen miniature pig animal models were used in the in vivo experiment. The pigs were sacrificed at 24 weeks after surgery, and the reconstructed acetabulum was evaluated using histological sections.

Results

Structural analysis revealed that the diameter of the PELA electrospun fiber was 0.8195 ± 0.16 μm. The PELA electrospun fiber materials showed good hydrophilicity and biocompatibility and could continuously release BMP-2 within 27 days: 16.07 ± 0.11 ng of BMP-2 was released from the scaffold. A total of sixteen implants fully filled the defects, and hematoxylin and eosin staining and Goldner's trichrome staining showed that the simple tendon group (T group) was mostly fibrous tissues, lots of fibroblasts and small amounts of chondrocytes were observed in the polydopamine-coated electrospun fiber group (DP group). The DP plus BMP-2 (DPB) group showed a large number of chondrocytes and partial new bone tissues.

Conclusion

PELA electrospun fibrous scaffolds are good sustained-release carriers, which can not only induce implant differentiation into cartilage and bone but also are completely degraded without toxicity. Therefore, the material can be used for bone and cartilage regeneration.