Synchrotron radiolysis and mass spectrometry: a new approach to research on the actin cytoskeleton

Recent advances in structural mass spectrometry methods in the context of biosimilarity assessment: from sequence heterogeneities to higher order structures

Biotherapeutics and their biosimilar versions have been flourishing in the biopharmaceutical market for several years. Structural and functional characterization is needed to achieve analytical biosimilarity through the assessment of critical quality attributes as required by regulatory authorities. The role of analytical strategies, particularly mass spectrometry-based methods, is pivotal to gathering valuable information for the in-depth characterization of biotherapeutics and biosimilarity assessment. Structural mass spectrometry methods (native MS, HDX-MS, top-down MS, etc.) provide information ranging from primary sequence assessment to higher order structure evaluation. This review focuses on recent developments and applications in structural mass spectrometry for biotherapeutic and biosimilar characterization.

Chloride-Mediated Peroxide-Free Photochemical Oxidation of Proteins (PPOP) in Mass Spectrometry-Based Structural Analysis

Ultraviolet (UV) laser photolysis of hydrogen peroxide (H₂O₂) for the in situ generation of hydroxyl radicals (^•OH) is a widely utilized strategy in the oxidation footprinting of native proteins and mass spectrometry (MS)-based structural analysis. However, it remains challenging to realize peroxide-free photochemical oxidation footprinting. Herein, we describe the footprinting of native proteins by chloride-mediated peroxide-free photochemical oxidation of proteins (PPOP). The protein samples are prepared within biocompatible phosphate-buffered saline (PBS) containing 10 mM Gln as radical scavengers and oxidized in a capillary flow reactor directly under a single-pulse (10 ns) irradiation of a 193 nm ArF UV laser. The main oxidized protein residues are CMYWFHLI. We demonstrate that the PPOP-MS strategy is highly sensitive to the protein high-order structures and can be applied to monitor the protein-drug interfaces, which provides a promising footprinting alternative for protein structure-function explorations.

Using X-ray Footprinting and Mass Spectrometry to Study the Structure and Function of Membrane Proteins

BACKGROUND

Membrane proteins are crucial for cellular sensory cascades and metabolite transport, and hence are key pharmacological targets. Structural studies by traditional highresolution techniques are limited by the requirements for high purity and stability when handled in high concentration and nonnative buffers. Hence, there is a growing requirement for the use of alternate methods in a complementary but orthogonal approach to study the dynamic and functional aspects of membrane proteins in physiologically relevant conditions. In recent years, significant progress has been made in the field of X-ray radiolytic labeling in combination with mass spectroscopy, commonly known as X-ray Footprinting and Mass Spectrometry (XFMS), which provide residue-specific information on the solvent accessibility of proteins. In combination with both lowresolution biophysical methods and high-resolution structural data, XFMS is capable of providing valuable insights into structure and dynamics of membrane proteins, which have been difficult to obtain by standalone high-resolution structural techniques. The XFMS method has also demonstrated a unique capability for identification of structural waters and their dynamics in protein cavities at both a high degree of spatial and temporal resolution, and thus capable of identifying conformational hot-spots in transmembrane proteins.

CONCLUSION

We provide a perspective on the place of XFMS amongst other structural biology methods and showcase some of the latest developments in its usage for studying conformational changes in membrane proteins.

High-Resolution Hydroxyl Radical Protein Footprinting: Biophysics Tool for Drug Discovery

Hydroxyl radical footprinting (HRF) of proteins with mass spectrometry (MS) is a widespread approach for assessing protein structure. Hydroxyl radicals react with a wide variety of protein side chains, and the ease with which radicals can be generated (by radiolysis or photolysis) has made the approach popular with many laboratories. As some side chains are less reactive and thus cannot be probed, additional specific and nonspecific labeling reagents have been introduced to extend the approach. At the same time, advances in liquid chromatography and MS approaches permit an examination of the labeling of individual residues, transforming the approach to high resolution. Lastly, advances in understanding of the chemistry of the approach have led to the determination of absolute protein topologies from HRF data. Overall, the technology can provide precise and accurate measures of side-chain solvent accessibility in a wide range of interesting and useful contexts for the study of protein structure and dynamics in both academia and industry.

Synchrotron X-ray footprinting on tour

Synchrotron footprinting is a valuable technique in structural biology for understanding macromolecular solution-state structure and dynamics of proteins and nucleic acids. Although an extremely powerful tool, there is currently only a single facility in the USA, the X28C beamline at the National Synchrotron Light Source (NSLS), dedicated to providing infrastructure, technology development and support for these studies. The high flux density of the focused white beam and variety of specialized exposure environments available at X28C enables footprinting of highly complex biological systems; however, it is likely that a significant fraction of interesting experiments could be performed at unspecialized facilities. In an effort to investigate the viability of a beamline-flexible footprinting program, a standard sample was taken on tour around the nation to be exposed at several US synchrotrons. This work describes how a relatively simple and transportable apparatus can allow beamlines at the NSLS, CHESS, APS and ALS to be used for synchrotron footprinting in a general user mode that can provide useful results.

Myosin binding surface on actin probed by hydroxyl radical footprinting and site-directed labels

Actin and myosin are the two main proteins required for cell motility and muscle contraction. The structure of their strongly bound complex-rigor state-is a key for delineating the functional mechanism of actomyosin motor. Current knowledge of that complex is based on models obtained from the docking of known atomic structures of actin and myosin subfragment 1 (S1; the head and neck region of myosin) into low-resolution electron microscopy electron density maps, which precludes atomic- or side-chain-level information. Here, we use radiolytic protein footprinting for global mapping of sites across the actin molecules that are impacted directly or allosterically by myosin binding to actin filaments. Fluorescence and electron paramagnetic resonance spectroscopies and cysteine actin mutants are used for independent, residue-specific probing of S1 effects on two structural elements of actin. We identify actin residue candidates involved in S1 binding and provide experimental evidence to discriminate between the regions of hydrophobic and electrostatic interactions. Focusing on the role of the DNase I binding loop (D-loop) and the W-loop residues of actin in their interactions with S1, we found that the emission properties of acrylodan and the mobility of electron paramagnetic resonance spin labels attached to cysteine mutants of these residues change strongly and in a residue-specific manner upon S1 binding, consistent with the recently proposed direct contacts of these loops with S1. As documented in this study, the direct and indirect changes on actin induced by myosin are more extensive than known until now and attest to the importance of actin dynamics to actomyosin function.

Structural characterization of HIV gp41 with the membrane-proximal external region

Human immunodeficiency virus, type 1 (HIV-1) envelope glycoprotein (gp120/gp41) plays a critical role in virus infection and pathogenesis. Three of the six monoclonal antibodies considered to have broadly neutralizing activities (2F5, 4E10, and Z13e1) bind to the membrane-proximal external region (MPER) of gp41. This makes the MPER a desirable template for developing immunogens that can elicit antibodies with properties similar to these monoclonal antibodies, with a long term goal of developing antigens that could serve as novel HIV vaccines. In order to provide a structural basis for rational antigen design, an MPER construct, HR1-54Q, was generated for x-ray crystallographic and x-ray footprinting studies to provide both high resolution atomic coordinates and verification of the solution state of the antigen, respectively. The crystal structure of HR1-54Q reveals a trimeric, coiled-coil six-helical bundle, which probably represents a postfusion form of gp41. The MPER portion extends from HR2 in continuation of a slightly bent long helix and is relatively flexible. The structures observed for the 2F5 and 4E10 epitopes agree well with existing structural data, and enzyme-linked immunosorbent assays indicate that the antigen binds well to antibodies that recognize the above epitopes. Hydroxyl radical-mediated protein footprinting of the antigen in solution reveals specifically protected and accessible regions consistent with the predictions based on the trimeric structure from the crystallographic data. Overall, the HR1-54Q antigen, as characterized by crystallography and footprinting, represents a postfusion, trimeric form of HIV gp41, and its structure provides a rational basis for gp41 antigen design suitable for HIV vaccine development.

Visualizing water molecules in transmembrane proteins using radiolytic labeling methods

Essential to cells and their organelles, water is both shuttled to where it is needed and trapped within cellular compartments and structures. Moreover, ordered waters within protein structures often colocalize with strategically placed polar or charged groups critical for protein function, yet it is unclear if these ordered water molecules provide structural stabilization, mediate conformational changes in signaling, neutralize charged residues, or carry out a combination of all these functions. Structures of many integral membrane proteins, including G protein-coupled receptors (GPCRs), reveal the presence of ordered water molecules that may act like prosthetic groups in a manner quite unlike bulk water. Identification of "ordered" waters within a crystalline protein structure requires sufficient occupancy of water to enable its detection in the protein's X-ray diffraction pattern, and thus, the observed waters likely represent a subset of tightly bound functional waters. In this review, we highlight recent studies that suggest the structures of ordered waters within GPCRs are as conserved (and thus as important) as conserved side chains. In addition, methods of radiolysis, coupled to structural mass spectrometry (protein footprinting), reveal dynamic changes in water structure that mediate transmembrane signaling. The idea of water as a prosthetic group mediating chemical reaction dynamics is not new in fields such as catalysis. However, the concept of water as a mediator of conformational dynamics in signaling is just emerging, because of advances in both crystallographic structure determination and new methods of protein footprinting. Although oil and water do not mix, understanding the roles of water is essential to understanding the function of membrane proteins.

Integrated algorithms for high-throughput examination of covalently labeled biomolecules by structural mass spectrometry

Mass spectrometry based structural proteomics approaches for probing protein structures are increasingly gaining in popularity. The potential for such studies is limited because of the lack of analytical techniques for the automated interpretation of resulting data. In this article, a suite of algorithms called ProtMapMS is developed, integrated, and implemented specifically for the comprehensive automatic analysis of mass spectrometry data obtained for protein structure studies using covalent labeling. The functions include data format conversion, mass spectrum interpretation, detection, and verification of all peptide species, confirmation of the modified peptide products, and quantification of the extent of peptide modification. The results thus obtained provide valuable data for use in combination with computational approaches for protein structure modeling. The structures of both monomeric and hexameric forms of insulin were investigated by oxidative protein footprinting followed by high-resolution mass spectrometry. The resultant data was analyzed both manually and using ProtMapMS without any manual intervention. The results obtained using the two methods were found to be in close agreement and overall were consistent with predictions from the crystallographic structure.

Cold chemical oxidation of proteins

Various methods of protein footprinting use hydrogen peroxide as an oxidant. Its removal by various solid-phase desalting methods, catalase treatment, or freeze drying after the footprinting is critical to ensure no uncontrolled oxidation. Although catalase treatment removes hydrogen peroxide with little loss of protein or additional protein oxidation, we discovered that freeze drying or freezing of the protein in a peroxide solution does lead to protein oxidation. Interestingly, the oxidation is not a result of freeze or thaw processes but is dependent on the temperature and length of time for incubation. After 2 h, apomyoglobin undergoes almost-complete single oxidation at -80 degrees C and double oxidation at -15 degrees C. Minimal oxidation is observed at 4 and 22 degrees C, compared to oxidation at -80 or -15 degrees C. The concentration of hydrogen peroxide is critical; 75 mM (0.2%) is required to oxidize >50% of the protein at -15 degrees C and 100 mM (0.3%) is required at -80 degrees C. In addition to Met, approximately 5% of the tryptophan and tyrosine residues are oxidized, as well as lower amounts of His and Phe. Oxidation of Val 68 and Val 17 (a buried residue) also occurs, with the oxidation of Val 17 likely occurring by electron transfer from one of two of the oxidized aromatic residues that are in contact with Val 17. Here, we describe the need to remove the hydrogen peroxide prior to cold storage of proteins, and we also report some preliminary results pertaining to the mechanism of cold, solid-state oxidation.

Fragmentation mechanisms of oxidized peptides elucidated by SID, RRKM modeling, and molecular dynamics

The gas-phase fragmentation reactions of singly charged angiotensin II (AngII, DR(+)VYIHPF) and the ozonolysis products AngII+O (DR(+)VY*IHPF), AngII+3O (DR(+)VYIH*PF), and AngII+4O (DR(+)VY*IH*PF) were studied using SID FT-ICR mass spectrometry, RRKM modeling, and molecular dynamics. Oxidation of Tyr (AngII+O) leads to a low-energy charge-remote selective fragmentation channel resulting in the b(4)+O fragment ion. Modification of His (AngII+3O and AngII+4O) leads to a series of new selective dissociation channels. For AngII+3O and AngII+4O, the formation of [MH+3O](+)-45 and [MH+3O](+)-71 are driven by charge-remote processes while it is suggested that b(5) and [MH+3O](+)-88 fragments are a result of charge-directed reactions. Energy-resolved SID experiments and RRKM modeling provide threshold energies and activation entropies for the lowest energy fragmentation channel for each of the parent ions. Fragmentation of the ozonolysis products was found to be controlled by entropic effects. Mechanisms are proposed for each of the new dissociation pathways based on the energies and entropies of activation and parent ion conformations sampled using molecular dynamics.

Modeling of protein binary complexes using structural mass spectrometry data

In this article, we describe a general approach to modeling the structure of binary protein complexes using structural mass spectrometry data combined with molecular docking. In the first step, hydroxyl radical mediated oxidative protein footprinting is used to identify residues that experience conformational reorganization due to binding or participate in the binding interface. In the second step, a three-dimensional atomic structure of the complex is derived by computational modeling. Homology modeling approaches are used to define the structures of the individual proteins if footprinting detects significant conformational reorganization as a function of complex formation. A three-dimensional model of the complex is constructed from these binary partners using the ClusPro program, which is composed of docking, energy filtering, and clustering steps. Footprinting data are used to incorporate constraints-positive and/or negative-in the docking step and are also used to decide the type of energy filter-electrostatics or desolvation-in the successive energy-filtering step. By using this approach, we examine the structure of a number of binary complexes of monomeric actin and compare the results to crystallographic data. Based on docking alone, a number of competing models with widely varying structures are observed, one of which is likely to agree with crystallographic data. When the docking steps are guided by footprinting data, accurate models emerge as top scoring. We demonstrate this method with the actin/gelsolin segment-1 complex. We also provide a structural model for the actin/cofilin complex using this approach which does not have a crystal or NMR structure.

Three-dimensional structure of cofilin bound to monomeric actin derived by structural mass spectrometry data

The cytoskeletal protein, actin, has its structure and function regulated by cofilin. In the absence of an atomic resolution structure for the actin/cofilin complex, the mechanism of cofilin regulation is poorly understood. Theoretical studies based on the similarities of cofilin and gelsolin segment 1 proposed the cleft between subdomains 1 and 3 in actin as the cofilin binding site. We used radiolytic protein footprinting with mass spectrometry and molecular modeling to provide an atomic model of how cofilin binds to monomeric actin. Footprinting data suggest that cofilin binds to the cleft between subdomains 1 and 2 in actin and that cofilin induces further closure of the actin nucleotide cleft. Site-specific fluorescence data confirm these results. The model identifies key ionic and hydrophobic interactions at the binding interface, including hydrogen-bonding between His-87 of actin to Ser-89 of cofilin that may control the charge dependence of cofilin binding. This model and its implications fill an especially important niche in the actin field, owing to the fact that ongoing crystallization efforts of the actin/cofilin complex have so far failed. This 3D binary complex structure is derived from a combination of solution footprinting data and computational approaches and outlines a general method for determining the structure of such complexes.

Biochemical implications of a three-dimensional model of monomeric actin bound to magnesium-chelated ATP

Actin structure is of intense interest in biology due to its importance in cell function and motility mediated by the spatial and temporal regulation of actin monomer-filament interconversions in a wide range of developmental and disease states. Despite this interest, the structure of many functionally important actin forms has eluded high-resolution analysis. Due to the propensity of actin monomers to assemble into filaments structural analysis of Mg-bound actin monomers has proven difficult, whereas high-resolution structures of actin with a diverse array of ligands that preclude polymerization have been quite successful. In this work, we provide a high-resolution structural model of the Mg-ATP-actin monomer using a combination of computational methods and experimental footprinting data that we have previously published. The key conclusion of this study is that the structure of the nucleotide binding cleft defined by subdomains 2 and 4 is essentially closed, with specific contacts between two subdomains predicted by the data.

Visualizing Arp2/3 complex activation mediated by binding of ATP and WASp using structural mass spectrometry

Actin-related protein (Arp) 2/3 complex nucleates new branches in actin filaments playing a key role in controlling eukaryotic cell motility. This process is tightly regulated by activating factors: ATP and WASp-family proteins. However, the mechanism of activation remains largely hypothetical. We used radiolytic protein footprinting with mass spectrometry in solution to probe the effects of nucleotide- and WASp-binding on Arp2/3. These results represent two significant advances in such footprinting approaches. First, Arp2/3 is the most complex macromolecular assembly yet examined; second, only a few picomoles of Arp2/3 was required for individual experiments. In terms of structural biology of Arp 2/3, we find that ATP binding induces conformational changes within Arp2/3 complex in Arp3 (localized in peptide segments 5-18, 212-225, and 318-327) and Arp2 (within peptide segment 300-316). These data are consistent with nucleotide docking within the nucleotide clefts of the actin-related proteins promoting closure of the cleft of the Arp3 subunit. However, ATP binding does not induce conformational changes in the other Arp subunits. Arp2/3 complex binds to WASp within the C subdomain at residue Met 474 and within the A subdomain to Trp 500. Our data suggest a bivalent attachment of WASp to Arp3 (within peptides 162-191 and 318-329) and Arp2 (within peptides 66-80 and 87-97). WASp-dependent protections from oxidation within peptides 54-65 and 80-91 of Arp3 and in peptides 300-316 of Arp2 suggest domain rearrangements of Arp2 and Arp3 resulting in a closed conformational state consistent with an "actin-dimer" model for the active state.

RADIOLYTIC PROTEIN FOOTPRINTING WITH MASS SPECTROMETRY TO PROBE THE STRUCTURE OF MACROMOLECULAR COMPLEXES

Structural proteomics approaches using mass spectrometry are increasingly used in biology to examine the composition and structure of macromolecules. Hydroxyl radical-mediated protein footprinting using mass spectrometry has recently been developed to define structure, assembly, and conformational changes of macromolecules in solution based on measurements of reactivity of amino acid side chain groups with covalent modification reagents. Accurate measurements of side chain reactivity are achieved using quantitative liquid-chromatography-coupled mass spectrometry, whereas the side chain modification sites are identified using tandem mass spectrometry. In addition, the use of footprinting data in conjunction with computational modeling approaches is a powerful new method for testing and refining structural models of macromolecules and their complexes. In this review, we discuss the basic chemistry of hydroxyl radical reactions with peptides and proteins, highlight various approaches to map protein structure using radical oxidation methods, and describe state-of-the-art approaches to combine computational and footprinting data.

Structural proteomics of macromolecular assemblies using oxidative footprinting and mass spectrometry

Understanding the composition, structure and dynamics of macromolecules and their assemblies is at the forefront of biological science today. Hydroxyl-radical-mediated protein footprinting using mass spectrometry can define macromolecular structure, macromolecular assembly and conformational changes of macromolecules in solution based on measurements of reactivity of amino acid side-chain groups with covalent-modification reagents. Subsequent to oxidation by reactive oxygen species, proteins are digested by specific proteases to generate peptides for analysis by mass spectrometry. Accurate measurements of side-chain reactivity are achieved using quantitative liquid-chromatography-coupled mass spectrometry, whereas the side-chain sites within the macromolecular probes are identified using tandem mass spectrometry. In addition, the use of footprinting data in conjunction with computational modeling approaches is a powerful new method for testing and refining structural models of macromolecules and their complexes.

Mutagenesis-based definitions and probes of residue burial in proteins

Every residue of the 101-aa Escherichia coli toxin CcdB was substituted with Ala, Asp, Glu, Lys, and Arg by using site-directed mutagenesis. The activity of each mutant in vivo was characterized as a function of Controller of Cell Division or Death B protein (CcdB) transcriptional level. The mutation data suggest that an accessibility value of 5% is an appropriate cutoff for definition of buried residues. At all buried positions, introduction of Asp results in an inactive phenotype at all CcdB transcriptional levels. The average amount of destabilization upon substitution at buried positions decreases in the order Asp>Glu>Lys>Arg>Ala. Asp substitutions at buried sites in two other proteins, maltose-binding protein and thioredoxin, also were shown to be severely destabilizing. Ala and Asp scanning mutagenesis, in combination with dose-dependent expression phenotypes, was shown to yield important information on protein structure and activity. These results also suggest that such scanning mutagenesis data can be used to rank order sequence alignments and their corresponding homology models, as well as to distinguish between correct and incorrect structural alignments. With continuous reductions in oligonucleotide costs and increasingly efficient site-directed mutagenesis procedures, comprehensive scanning mutagenesis experiments for small proteins/domains are quite feasible.

Structural allostery and binding of the transferrin*receptor complex

The structural allostery and binding interface for the human serum transferrin (Tf)*transferrin receptor (TfR) complex were identified using radiolytic footprinting and mass spectrometry. We have determined previously that the transferrin C-lobe binds to the receptor helical domain. In this study we examined the binding interactions of full-length transferrin with receptor and compared these data with a model of the complex derived from cryoelectron microscopy (cryo-EM) reconstructions (Cheng, Y., Zak, O., Aisen, P., Harrison, S. C. & Walz, T. (2004) Structure of the human transferrin receptor.transferrin complex. Cell 116, 565-576). The footprinting results provide the following novel conclusions. First, we report characteristic oxidations of acidic residues in the C-lobe of native Tf and basic residues in the helical domain of TfR that were suppressed as a function of complex formation; this confirms ionic interactions between these protein segments as predicted by cryo-EM data and demonstrates a novel method for detecting ion pair interactions in the formation of macromolecular complexes. Second, the specific side-chain interactions between the C-lobe and N-lobe of transferrin and the corresponding interactions sites on the transferrin receptor predicted from cryo-EM were confirmed in solution. Last, the footprinting data revealed allosteric movements of the iron binding C- and N-lobes of Tf that sequester iron as a function of complex formation; these structural changes promote tighter binding of the metal ion and facilitate efficient ion transport during endocytosis.

Effect of pressure on pulse radiolysis reduction of proteins

Pulse radiolysis experiments were performed on proteins under pressure. Whereas many spectroscopic techniques have shown protein modifications at different pressure ranges, the present measurements performed using the water radiolysis allowed to generate radical species and to study the mechanisms implied in their reactions with proteins. This work gives the first results obtained on the effects of pressure on the rate constants of the proteins reduction by the hydrated electron at pressures up to 100 MPa. The reaction with the hydrated electron was investigated on two classes of protein: the horse myoglobin and the mussel metallothioneins. We have successively studied the influence of the pH value of metmyoglobin solutions (pH 6, 7 and 8) and the influence of the metals nature (Zn,Cu,Cd) bound to metallothioneins. For both protein, whatever the experimental conditions, the pressure does not influence the value of the reduction rate constant in the investigated range (0.1-100 MPa).

Metal-catalyzed oxidation reactions and mass spectrometry: The roles of ascorbate and different oxidizing agents in determining Cu–protein-binding sites

Further study has been made of metal-catalyzed oxidation (MCO) reactions and mass spectrometry as a method to determine the binding site of copper in metalloproteins. The role of ascorbate and a variety of oxidizing agents, including O2, H2O2, and S2O8(2-), have been investigated using Cu/Zn superoxide dismutase (SOD) as a model system. Ascorbate is found to play two competing roles in the MCO reactions. It reduces Cu(II), which initiates and maintains the generation of reactive oxygen species, and it scavenges radicals, which helps to localize oxidation products to amino acids near the metal center. An ascorbate concentration of 100 mM is found to be optimal with regard to localizing oxidation products to only the Cu-binding residues (His44, His46, His61, and His118) of Cu/Zn SOD. This concentration of ascorbate is very similar to the optimum concentration found in our previous studies of different Cu-binding proteins. Another notable result from this study is the observation that S2O8(2-) is more effective as an oxidant than O2 or H2O2 in the MCO reactions. Because S2O8(2-) is more stable in solution than H2O2, using it as an oxidizing agent results in much less nonspecific oxidation to the protein. The overall results of this study suggest that general MCO reaction conditions may exist for determining the metal-binding site of a wide range of Cu-binding proteins.

Data-driven docking for the study of biomolecular complexes

With the amount of genetic information available, a lot of attention has focused on systems biology, in particular biomolecular interactions. Considering the huge number of such interactions, and their often weak and transient nature, conventional experimental methods such as X-ray crystallography and NMR spectroscopy are not sufficient to gain structural insight into these. A wealth of biochemical and/or biophysical data can, however, readily be obtained for biomolecular complexes. Combining these data with docking (the process of modeling the 3D structure of a complex from its known constituents) should provide valuable structural information and complement the classical structural methods. In this review we discuss and illustrate the various sources of data that can be used to map interactions and their combination with docking methods to generate structural models of the complexes. Finally a perspective on the future of this kind of approach is given.

High-throughput computational and experimental techniques in structural genomics

Structural genomics has as its goal the provision of structural information for all possible ORF sequences through a combination of experimental and computational approaches. The access to genome sequences and cloning resources from an ever-widening array of organisms is driving high-throughput structural studies by the New York Structural Genomics Research Consortium. In this report, we outline the progress of the Consortium in establishing its pipeline for structural genomics, and some of the experimental and bioinformatics efforts leading to structural annotation of proteins. The Consortium has established a pipeline for structural biology studies, automated modeling of ORF sequences using solved (template) structures, and a novel high-throughput approach (metallomics) to examining the metal binding to purified protein targets. The Consortium has so far produced 493 purified proteins from >1077 expression vectors. A total of 95 have resulted in crystal structures, and 81 are deposited in the Protein Data Bank (PDB). Comparative modeling of these structures has generated >40,000 structural models. We also initiated a high-throughput metal analysis of the purified proteins; this has determined that 10%-15% of the targets contain a stoichiometric structural or catalytic transition metal atom. The progress of the structural genomics centers in the U.S. and around the world suggests that the goal of providing useful structural information on most all ORF domains will be realized. This projected resource will provide structural biology information important to understanding the function of most proteins of the cell.

DNA Binding Provides a Molecular Strap Activating the Adenovirus Proteinase

Human adenovirus proteinase (AVP) requires two cofactors for maximal activity: pVIc, a peptide derived from the C terminus of adenovirus precursor protein pVI, and the viral DNA. Synchrotron protein footprinting was used to map the solvent accessible cofactor binding sites and to identify conformational changes associated with the binding of cofactors to AVP. The binding of pVIc alone or pVIc and DNA together to AVP triggered significant conformational changes adjacent to the active site cleft sandwiched between the two AVP subdomains. In addition, upon binding of DNA to AVP, it was observed that specific residues on each of the two major subdomains were significantly protected from hydroxyl radicals. Based on the locations of these protected side-chain residues and conserved aromatic and positively charged residues within AVP, a three-dimensional model of DNA binding was constructed. The model indicated that DNA binding can alter the relative orientation of the two AVP domains leading to the partial activation of AVP by DNA. In addition, both pVIc and DNA may independently alter the active site conformation as well as drive it cooperatively to fully activate AVP.

Tyrosine residues modification studied by MALDI-TOF mass spectrometry

Amino acid residue-specific reactivity in proteins is of great current interest in structural biology as it provides information about solvent accessibility and reactivity of the residue and, consequently, about protein structure and possible interactions. In the work presented tyrosine residues of three model proteins with known spatial structure are modified with two tyrosine-specific reagents: tetranitromethane and iodine. Modified proteins were specifically digested by proteases and the mass of resulting peptide fragments was determined using matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry. Our results show that there are only small differences in the extent of tyrosine residues modification by tetranitromethane and iodine. However, data dealing with accessibility of reactive residues obtained by chemical modifications are not completely identical with those obtained by nuclear magnetic resonance and X-ray crystallography. These interesting discrepancies can be caused by local molecular dynamics and/or by specific chemical structure of the residues surrounding.