Electrostatic and nonpolar peptide-membrane interactions. Lipid binding and functional properties of somatostatin analogues of charge z = +1 to z = +3

Importance of Negatively Charged Residues in the Membrane Ordering Activity of SARS-CoV-1 and -2 Fusion Peptides

Entry of coronaviruses into host cells is mediated by the viral spike (S) protein. Previously, we identified the bona fide FPs for SARS-CoV ("SARS-1") and SARS-CoV-2 ("SARS-2") using ESR spectroscopy. We also found that their FPs induce membrane ordering in a Ca²⁺-dependent fashion. Here we study which negatively charged residues in SARS-1 FP are involved in this binding, to build a topological model and clarify the role of Ca²⁺. Our systematic mutation study on the SARS-1 FP shows that all six negatively charged residues contribute to the FP's membrane ordering activity, with D812 the dominant residue. The corresponding SARS-2 residue D830 plays an equivalent role. We provide a topological model of how the FP binds Ca²⁺ ions: its two segments FP1 and FP2 each bind one Ca²⁺. The binding of Ca²⁺, the folding of FP (both studied by ITC experiments), and the ordering activity correlate very well across the mutants, suggesting that the Ca²⁺ helps the folding of FP in membranes to enhance the ordering activity. Using a novel pseudotyped virus particle (PP)-liposome methodology, we monitored the membrane ordering induced by the FPs in the whole S protein in its trimer form in real time. We found that the SARS-1 and SARS-2 PPs also induce membrane ordering to the extent that separate FPs do, and mutations of the negatively charged residues also significantly suppress the membrane ordering activity. However, the slower kinetics of the FP ordering activity vs. that of the PP suggests the need for initial trimerization of the FPs.

Critical Negatively Charged Residues Are Important for the Activity of SARS-CoV-1 and SARS-CoV-2 Fusion Peptides.. [PMID: 34909776 PMCID: PMC8669843 DOI: 10.1101/2021.11.03.467161] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Coronaviruses are a major infectious disease threat, and include the human pathogens of zoonotic origin SARS-CoV (“SARS-1”), SARS-CoV-2 (“SARS-2”) and MERS-CoV (“MERS”). Entry of coronaviruses into host cells is mediated by the viral spike (S) protein. Previously, we identified that the domain immediately downstream of the S2’ cleavage site is the bona fide FP (amino acids 798–835) for SARS-1 using ESR spectroscopy technology. We also found that the SARS-1 FP induces membrane ordering in a Ca²⁺ dependent fashion. In this study, we want to know which residues are involved in this Ca²⁺ binding, to build a topological model and to understand the role of the Ca2+. We performed a systematic mutation study on the negatively charged residues on the SARS-1 FP. While all six negatively charged residues contributes to the membrane ordering activity of the FP to some extent, D812 is the most important residue. We provided a topological model of how the FP binds Ca²⁺ ions: both FP1 and FP2 bind one Ca²⁺ ion, and there are two binding sites in FP1 and three in FP2. We also found that the corresponding residue D830 in the SARS-2 FP plays a similar critical role. ITC experiments show that the binding energies between the FP and Ca²⁺ as well as between the FP and membranes also decreases for all mutants. The binding of Ca²⁺, the folding of FP and the ordering activity correlated very well across the mutants, suggesting that the function of the Ca²⁺ is to help to folding of FP in membranes to enhance its activity. Using a novel pseudotyped virus particle (PP)-liposome methodology, we monitored the membrane ordering induced by the FPs in the whole S proteins in its trimer form in real time. We found that the SARS-1 and SARS-2 PPs also induce membrane ordering as the separate FPs do, and the mutations of the negatively charged residues also greatly reduce the membrane ordering activity. However, the difference in kinetic between the PP and FP indicates a possible role of FP trimerization. This finding could lead to therapeutic solutions that either target the FP-calcium interaction or block the Ca²⁺ channel to combat the ongoing COVID-19 pandemic.

SARS-CoV-2 Fusion Peptide has a Greater Membrane Perturbating Effect than SARS-CoV with Highly Specific Dependence on Ca2

Coronaviruses are a major infectious disease threat, and include the zoonotic-origin human pathogens SARS-CoV-2, SARS-CoV, and MERS-CoV (SARS-2, SARS-1, and MERS). Entry of coronaviruses into host cells is mediated by the spike (S) protein. In our previous ESR studies, the local membrane ordering effect of the fusion peptide (FP) of various viral glycoproteins including the S of SARS-1 and MERS has been consistently observed. We previously determined that the sequence immediately downstream from the S2′ cleavage site is the bona fide SARS-1 FP. In this study, we used sequence alignment to identify the SARS-2 FP, and studied its membrane ordering effect. Although there are only three residue differences, SARS-2 FP induces even greater membrane ordering than SARS-1 FP, possibly due to its greater hydrophobicity. This may be a reason that SARS-2 is better able to infect host cells. In addition, the membrane binding enthalpy for SARS-2 is greater. Both the membrane ordering of SARS-2 and SARS-1 FPs are dependent on Ca²⁺, but that of SARS-2 shows a greater response to the presence of Ca²⁺. Both FPs bind two Ca²⁺ ions as does SARS-1 FP, but the two Ca²⁺ binding sites of SARS-2 exhibit greater cooperativity. This Ca²⁺ dependence by the SARS-2 FP is very ion-specific. These results show that Ca²⁺ is an important regulator that interacts with the SARS-2 FP and thus plays a significant role in SARS-2 viral entry. This could lead to therapeutic solutions that either target the FP-calcium interaction or block the Ca²⁺ channel.

Location of the Positive Charges in Cationic Amphiphiles Modulates Their Mechanism of Action against Model Membranes

Synthetic cationic amphiphiles (CAms) with physicochemical properties similar to antimicrobial peptides are promising molecules in the search for alternative antibiotics to which pathogens cannot easily develop resistance. Here, we investigate two types of CAms based on tartaric acid and containing two hydrophobic chains (of 7 or 11 carbons) and two positive charges, located either at the end of the acyl chains (bola-like, B7 and B11) or at the tartaric acid backbone (gemini-like, G7 and G11). The interaction of the CAms with biomimetic membrane models (anionic and neutral liposomes) was studied with zeta potential and dynamic light scattering measurements, isothermal titration calorimetry, and a fluorescent-based leakage assay. We show that the type of molecule determines the mechanism of action of the CAms. Gemini-like molecules (G7 and G11) interact mainly via electrostatics (exothermic process) and reside in the external vesicle leaflet, altering substantially the vesicle surface potential but not causing significant membrane lysis. On the other hand, the interaction of bola-like CAms (B7 and B11) is endothermic and thus entropy-driven, and these molecules reach both membrane leaflets and cause substantial membrane permeabilization, likely after clustering of anionic lipids. The lytic ability is clearly higher against anionic membranes as compared with neutral membranes. Within each class of molecule, longer alkyl chains (i.e., B11 and G11) exhibit higher affinity and lytic ability. Overall, the molecule B11 exhibits a high potential as antimicrobial agent, since it has a high membrane affinity and causes substantial membrane permeabilization.

Antidepressants are modifiers of lipid bilayer properties

The two major classes of antidepressants, tricyclic antidepressants (TCAs) and selective serotonin reuptake inhibitors (SSRIs), inhibit neurotransmitter reuptake at synapses. They also have off-target effects on proteins other than neurotransmitter transporters, which may contribute to both desired changes in brain function and the development of side effects. Many proteins modulated by antidepressants are bilayer spanning and coupled to the bilayer through hydrophobic interactions such that the conformational changes underlying their function will perturb the surrounding lipid bilayer, with an energetic cost (ΔG _def) that varies with changes in bilayer properties. Here, we test whether changes in ΔG _def caused by amphiphilic antidepressants partitioning into the bilayer are sufficient to alter membrane protein function. Using gramicidin A (gA) channels to probe whether TCAs and SSRIs alter the bilayer contribution to the free energy difference for the gramicidin monomer⇔dimer equilibrium (representing a well-defined conformational transition), we find that antidepressants alter gA channel activity with varying potency and no stereospecificity but with different effects on bilayer elasticity and intrinsic curvature. Measuring the antidepressant partition coefficients using isothermal titration calorimetry (ITC) or cLogP shows that the bilayer-modifying potency is predicted quite well by the ITC-determined partition coefficients, and channel activity is doubled at an antidepressant/lipid mole ratio of 0.02-0.07. These results suggest a mechanism by which antidepressants could alter the function of diverse membrane proteins by partitioning into cell membranes and thereby altering the bilayer contribution to the energetics of membrane protein conformational changes.

Interspecies Bombolitins Exhibit Structural Diversity upon Membrane Binding, Leading to Cell Specificity

Bombolitins, a class of peptides produced by bees of the genus Bombus, target and disrupt cellular membranes, leading to lysis. Antimicrobial peptides exhibit various mechanisms of action resulting from the interplay between peptide structure, lipid composition, and cellular target membrane selectivity. Herein, two bombolitins displaying significant amino-acid-sequence similarity, BII and BL6, were assessed for antimicrobial activity as well as correlated dodecylphosphocholine (DPC) micelle binding and membrane-induced peptide conformational changes. Infrared and circular dichroism spectroscopies were used to assess the structure-function relationship of each bombolitin, and the results indicate that BII forms a rigid and helically ordered secondary structure upon binding to DPC micelles, whereas BL6 largely lacks secondary structural order. Moreover, the binding affinity of each peptide to DPC micelles was determined, revealing that BL6 displayed a difference in binding affinity by over two orders of magnitude. Further investigations into the growth-inhibitory activity of the two bombolitins were performed against Escherichia coli and Saccharomyces cerevisiae. Interestingly, BII specifically targeted S. cerevisiae, whereas BL6 more effectively inhibited E. coli growth. Overall, the antimicrobial selectivity and specificity of BII and BL6 are largely dependent on the primary as well as secondary structural content of the peptides and the membrane composition.

The SARS-CoV Fusion Peptide Forms an Extended Bipartite Fusion Platform that Perturbs Membrane Order in a Calcium-Dependent Manner

Coronaviruses (CoVs) are a major infectious disease threat and include the pathogenic human pathogens of zoonotic origin: severe acute respiratory syndrome CoV (SARS-CoV) and Middle East respiratory syndrome CoV (MERS-CoV). Entry of CoVs into host cells is mediated by the viral spike (S) protein, which is structurally categorized as a class I viral fusion protein, within the same group as influenza virus and HIV. However, S proteins have two distinct cleavage sites that can be activated by a much wider range of proteases. The exact location of the CoV fusion peptide (FP) has been disputed. However, most evidence suggests that the domain immediately downstream of the S2' cleavage site is the FP (amino acids 798-818 SFIEDLLFNKVTLADAGFMKQY for SARS-CoV, FP1). In our previous electron spin resonance spectroscopic studies, the membrane-ordering effect of influenza virus, HIV, and Dengue virus FPs has been consistently observed. In this study, we used this effect as a criterion to identify and characterize the bona fide SARS-CoV FP. Our results indicate that both FP1 and the region immediately downstream (amino acids 816-835 KQYGECLGDINARDLICAQKF, FP2) induce significant membrane ordering. Furthermore, their effects are calcium dependent, which is consistent with in vivo data showing that calcium is required for SARS-CoV S-mediated fusion. Isothermal titration calorimetry showed a direct interaction between calcium cations and both FPs. This Ca²⁺-dependency membrane ordering was not observed with influenza FP, indicating that the CoV FP exhibits a mechanistically different behavior. Membrane-ordering effects are greater and penetrate deeper into membranes when FP1 and FP2 act in a concerted manner, suggesting that they form an extended fusion "platform."

Sulpiride, Amisulpride, Thioridazine, and Olanzapine: Interaction with Model Membranes. Thermodynamic and Structural Aspects

Neuroleptic drugs are widely applied in effective treatment of schizophrenia and related disorders. The lipophilic character of neuroleptics means that they tend to accumulate in the lipid membranes, impacting their functioning and processing. In this paper, the effect of four drugs, namely, thioridazine, olanzapine, sulpiride, and amisulpride, on neutral and negatively charged lipid bilayers was examined. The interaction of neuroleptics with lipids and the subsequent changes in the membrane physical properties was assessed using several complementary biophysical approaches (isothermal titration calorimetry, electron paramagnetic resonance spectroscopy, dynamic light scattering, and ζ potential measurements). We have determined the thermodynamic parameters, that is, the enthalpy of interaction and the binding constant, to describe the interactions of the investigated drugs with model membranes. Unlike thioridazine and olanzapine, which bind to both neutral and negatively charged membranes, amisulpride interacts with only the negatively charged one, while sulpiride does not bind to any of them. The mechanism of olanzapine and thioridazine insertion into the bilayer membrane cannot be described merely by a simple molecule partition between two different phases (the aqueous and the lipid phase). We have estimated the number of protons transferred in the course of drug binding to determine which of its forms, ionized or neutral, binds more strongly to the membrane. Finally, electron paramagnetic resonance results indicated that the drugs are localized near the water-membrane interface of the bilayer and presence of a negative charge promotes their burying deeper into the membrane.

Thermodynamic and Biophysical Analysis of the Membrane-Association of a Histidine-Rich Peptide with Efficient Antimicrobial and Transfection Activities

LAH4-L1 is a synthetic amphipathic peptide with antimicrobial activity. The sequence of the 23 amino acid peptide was inspired by naturally occurring frog peptides such as PGLa and magainin. LAH4-L1 also facilitates the transport of nucleic acids through the cell membrane. We have investigated the membrane binding properties and energetics of LAH4-L1 at pH 5.5 with physical-chemical methods. CD spectroscopy was employed to quantitate the membrane-induced random coil-to-helix transition of LAH4-L1. Binding isotherms were obtained with CD spectroscopy as a function of the lipid-to-protein ratio for neutral and negatively charged membranes and were analyzed with both the Langmuir multisite adsorption model and the surface partition/Gouy-Chapman model. According to the Langmuir adsorption model each molecule LAH4-L1 binds 4 POPS molecules, independent of the POPS concentration in the membrane. This is supported by the surface partition/Gouy-Chapman model which predicts an electric charge of LAH4-L1 of z = 4. Binding affinity is dominated by electrostatic attraction. The thermodynamics of the binding process was elucidated with isothermal titration calorimetry. The ITC data revealed that the binding process is composed of at least three different reactions, that is, a coil-to-helix transition with an exothermic enthalpy of about -11 kcal/mol and two endothermic processes with enthalpies of ∼4 and ∼8 kcal/mol, respectively, which partly compensate the exothermic enthalpy of the conformational change. The major endothermic reaction is interpreted as a deprotonation reaction following the insertion of a highly charged cationic peptide into a nonpolar environment.

riDOM, a cell penetrating peptide. Interaction with phospholipid bilayers

Melittin is an amphipathic peptide which has received much attention as a model peptide for peptide-membrane interactions. It is however not suited as a transfection agent due to its cytolytic and toxicological effects. Retro-inverso-melittin, when covalently linked to the lipid 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (riDOM), eliminates these shortcomings. The interaction of riDOM with phospholipid membranes was investigated with circular dichroism (CD) spectroscopy, dynamic light scattering, ζ-potential measurements, and high-sensitivity isothermal titration calorimetry. riDOM forms cationic nanoparticles with a diameter of ~13nm which are well soluble in water and bind with high affinity to DNA and lipid membranes. When dissolved in bilayer membranes, riDOM nanoparticles dissociate and form transient pores. riDOM-induced membrane leakiness is however much reduced compared to that of authentic melittin. The secondary structure of the ri-melittin is not changed when riDOM is transferred from water to the membrane and displays a large fraction of β-structure. The (31)P NMR spectrum of the nanoparticle is however transformed into a typical bilayer spectrum. The Gibbs free energy of riDOM binding to bilayer membranes is -8.0 to -10.0kcal/mol which corresponds to the partition energy of just one fatty acyl chain. Half of the hydrophobic surface of the riDOM lipid extension with its 2 oleic acyl chains is therefore involved in a lipid-peptide interaction. This packing arrangement guarantees a good solubility of riDOM both in the aqueous and in the membrane phase. The membrane binding enthalpy is small and riDOM binding is thus entropy-driven.

Interaction of the antimicrobial peptide gomesin with model membranes: a calorimetric study

Gomesin is a potent cationic antimicrobial peptide (z = +6) isolated from the Brazilian spider Acanthoscurria gomesiana . The interaction of gomesin with large unilamellar vesicles composed of a 1:1 mixture of zwitterionic (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) and anionic (1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) phospholipids is studied with isothermal titration calorimetry (ITC). In parallel, light scattering and optical microscopy are used to assess peptide-induced vesicle aggregation. The ability of gomesin to permeabilize the membrane is examined with fluorescence spectroscopy of the leakage of 5,6-carboxyfluorescein (CF). Vesicles coated with 3 mol % 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (PE-PEG) lipids are also investigated to assess the influence of peptide-induced vesicle aggregation in the activity of gomesin. The ITC and light scattering titrations are done in two ways: lipid into peptide and peptide into lipid injections. Although some differences arise between the two setups, the basic interaction of gomesin with anionic vesicles is preserved. A surface partition model combined with the Gouy-Chapman theory is put forward to fit the ITC results. The intrinsic binding constant of gomesin is found to be K ≈ 10(3) M(-1). The interaction of gomesin with anionic membranes is highly exothermic and enthalpy-driven. Binding of gomesin is virtually always accompanied by vesicle aggregation and changes in membrane permeability, leading to CF leakage. Addition of PE-PEG to the membrane strongly attenuates vesicle aggregation but does not significantly change the mode of action of gomesin. The results point to a strong interaction of gomesin with the membrane surface, causing membrane rupture without a deep penetration into the bilayer core.

Peptide-induced bilayer thinning structure of unilamellar vesicles and the related binding behavior as revealed by X-ray scattering

We have studied the bilayer thinning structure of unilamellar vesicles (ULV) of a phospholipid 1,2-dierucoyl-sn-glycero-3-phosphocholine (di22:1PC) upon binding of melittin, a water-soluble amphipathic peptide. Successive thinning of the ULV bilayers with increasing peptide concentration was monitored via small-angle X-ray scattering (SAXS). Results suggest that the two leaflets of the ULV of closed bilayers are perturbed and thinned asymmetrically upon free peptide binding, in contrast to the centro-symmetric bilayer thinning of the substrate-oriented multilamellar membranes (MLM) with premixed melittin. Moreover, thinning of the melittin-ULV bilayer associates closely with peptide concentration in solution and saturates at ~4%, compared to the ~8% maximum thinning observed for the correspondingly premixed peptide-MLM bilayers. Linearly scaling the thinning of peptide-ULV bilayers to that of the corresponding peptide-MLM of a calibrated peptide-to-lipid ratio, we have deduced the number of bound peptides on the ULV bilayers as a function of free peptide concentration in solution. The hence derived X-ray-based binding isotherm allows extraction of a low binding constant of melittin to the ULV bilayers, on the basis of surface partition equilibrium and the Gouy-Chapman theory. Moreover, we show that the ULV and MLM bilayers of di22:1PC share a same thinning constant upon binding of a hydrophobic peptide alamethicin; this result supports the linear scaling approach used in the melittin-ULV bilayer thinning for thermodynamic binding parameters of water-soluble peptides.

The effect of the placement and total charge of the basic amino acid clusters on antibacterial organism selectivity and potency

Extensive circular dichroism, isothermal titration calorimetry and induced calcein leakage studies were conducted on a series of antimicrobial peptides (AMPs), with a varying number of Lys residues located at either the C-terminus or the N-terminus to gain insight into their effect on the mechanisms of binding with zwitterionic and anionic membrane model systems. Different CD spectra were observed for these AMPs in the presence of zwitterionic DPC and anionic SDS micelles indicating that they adopt different conformations on binding to the surfaces of zwitterionic and anionic membrane models. Different CD spectra were observed for these AMPs in the presence of zwitterionic POPC and anionic mixed 4:1 POPC/POPG LUVs and SUVs, indicating that they adopt very different conformations on interaction with these two types of LUVs and SUVs. In addition, ITC and calcein leakage data indicated that all the AMPs studied interact via very different mechanisms with anionic and zwitterionic LUVs. ITC data suggest these peptides interact primarily with the surface of zwitterionic LUVs while they insert into and form pores in anionic LUVs. CD studies indicated that these compounds adopt different conformations depending on the ratio of POPC to POPG lipids present in the liposome. There are detectable spectroscopic and thermodynamic differences between how each of these AMPs interacts with membranes, that is position and total charge density defines how these AMPs interact with specific membrane models and thus partially explain the resulting diversity of antibacterial activity of these compounds.

Determining the effect of the incorporation of unnatural amino acids into antimicrobial peptides on the interactions with zwitterionic and anionic membrane model systems

Circular Dichroism (CD), isothermal calorimetry (ITC) and calcein fluorescence leakage experiments were conducted to provide insight into the mechanisms of binding of a series of antimicrobial peptides containing unnatural amino acids (Ac-XF-Tic-Oic-XK-Tic-Oic-XF-Tic-Oic-XK-Tic-KKKK-CONH(2)) to zwitterionic and anionic micelles, SUVs and LUVs; where X (Spacer# 1) is either Gly, β-Ala, Gaba or 6-aminohexanoic acid. It is the intent of this investigation to correlate these interactions with the observed potency and selectivity against several different strains of bacteria. The CD spectra of these compounds in the presence of zwitterionic DPC micelles and anionic SDS micelles are very different indicating that these compounds adopt different conformations on binding to the surface of anionic and zwitterionic membrane models. These compounds also exhibited very different CD spectra in the presence of zwitterionic POPC and anionic mixed 4:1 POPC/POPG SUVs and LUVs, indicating the formation of different conformations on interaction with the two membrane types. This observation is also supported by ITC and calcein leakage data. ITC data suggested these peptides interact primarily with the surface of zwitterionic LUVs and was further supported by fluorescence experiments where the interactions do not appear to be concentration dependent. In the presence of anionic membranes, the interactions appear more complex and the calorimetric and fluorescence data both imply pore formation is dependent on peptide concentration. Furthermore, evidence suggests that as the length of Spacer# 1 increases the mechanism of pore formation also changes. Based on the observed differences in the mechanisms of interactions with zwitterionic and anionic LUVs these AMPs are potential candidates for further drug development.

The thermodynamics of simple biomembrane mimetic systems

Insight into the forces governing a system is essential for understanding its behavior and function. Thermodynamic investigations provide a wealth of information that is not, or is hardly, available from other methods. This article reviews thermodynamic approaches and assays to measure collective properties such as heat adsorption / emission and volume variations. These methods can be successfully applied to the study of lipid vesicles (liposomes) and biological membranes. With respect to instrumentation, differential scanning calorimetry, pressure perturbation calorimetry, isothermal titration calorimetry, dilatometry, and acoustic techniques aimed at measuring the isothermal and adiabatic processes, two- and three-dimensional compressibilities are considered. Applications of these techniques to lipid systems include the measurement of different thermodynamic parameters and a detailed characterization of thermotropic, barotropic, and lyotropic phase behavior. The membrane binding and / or partitioning of solutes (proteins, peptides, drugs, surfactants, ions, etc.) can also be quantified and modeled. Many thermodynamic assays are available for studying the effect of proteins and other additives on membranes, characterizing non-ideal mixing, domain formation, bilayer stability, curvature strain, permeability, solubilization, and fusion. Studies of membrane proteins in lipid environments elucidate lipid-protein interactions in membranes. Finally, a plethora of relaxation phenomena toward equilibrium thermodynamic structures can be also investigated. The systems are described in terms of enthalpic and entropic forces, equilibrium constants, heat capacities, partial volume changes, volume and area compressibility, and so on, also shedding light on the stability of the structures and the molecular origin and mechanism of the structural changes.

On the interaction of ionic detergents with lipid membranes. Thermodynamic comparison of n-alkyl-+N(CH₃)₃ and n-alkyl-SO₄⁻

Ionic detergents find widespread commercial applications as disinfectants, fungicides, or excipients in drug formulations and cosmetics. One mode of action is their ease of insertion into biological membranes. Very little quantitative information on this membrane-binding process is available to date. Using isothermal titration calorimetry (ITC) and dynamic light scattering (DLS), we have made a systematic comparison of the binding of cationic and anionic detergents to neutral and negatively charged lipid membranes. The detergents investigated were n-alkyl chains carrying either the trimethylammonium chloride (-(+)N(CH₃)₃Cl⁻) or the sodium sulfate (-SO₄⁻Na(+)) headgroup with chain lengths of n = 10-16. The titration of lipid vesicles into detergent solutions provided the binding enthalpy and the binding isotherm in a model-independent manner. At 25 °C the membrane binding enthalpies, ΔH(mem)(0), were small (-0.4 to -4.2 kcal/mol) and showed little correlation with the length of the alkyl chains. The ITC binding isotherms were analyzed in terms of a surface partition model. To this purpose, the surface concentration, cM, of detergent immediately above the plane of binding was calculated with the Gouy-Chapman theory. The surface concentration corrects for electrostatic attraction or repulsion and can be larger or smaller than the bulk detergent concentration, c(eq), at equilibrium. The analysis provides the chemical or hydrophobic binding constant, K(D)(0), of the detergent and the corresponding free energy. The free energies of binding, ΔG(mem)(0), vary between -4 and -10 kcal/mol. They show a linear dependence on the chain length, which can be used to separate the contributions of the polar group and the hydrocarbon tail in membrane binding. The neutral maltose and the cationic (+)N(CH₃)₃ headgroup show steric repulsion energies of about 2.5 kcal/mol counteracting the hydrophobic binding of the alkyl tail, whereas the anionic SO₄⁻ headgroup makes almost no contribution to membrane binding. The chemical nature of the headgroup influences the packing density of the hydrocarbon chains in the lipid bilayer with (+)N(CH₃)₃ eliciting the weakest chain-chain interaction. The minimum repulsive interaction of the SO₄⁻ polar group makes the sodium n-alkyl-sulfates much stronger detergents than the nonionic or cationic counterparts, the binding constants, K(D)(0), being 10-50 times larger than those of the corresponding n-alkyl-trimethylammonium chlorides. The membrane insertion was further compared with micelle formation of the same detergent. A cooperative aggregation model which includes all possible aggregation states is proposed to analyze micelle formation. The partition function can be defined in closed form, and it is straightforward to predict the thermodynamic properties of the micellar system. When aggregated in micelles, the detergent polar groups are in direct interaction and are not separated by lipid molecules. Under these conditions the SO₄⁻ group exhibits a strong electrostatic repulsive effect of 3.2 kcal/mol, while the contributions of the maltose and (+)N(CH₃)₃ headgroups are very similar to those in the lipid bilayer.

Acylated and unacylated ghrelin binding to membranes and to ghrelin receptor: towards a better understanding of the underlying mechanisms

The O-octanoylation of human ghrelin is a natural post-translational modification that enhances its binding to model membranes and could potentially play a central role in ghrelin biological activities. Here, we aimed to clarify the mechanisms that drive ghrelin to the membrane and hence to its receptor that mediates most of its endocrinological effects. As the acylation enhances ghrelin lipophilicity and that ghrelin contains many basic residues, we examined the electrostatic attraction and/or hydrophobic interactions with membranes. Using various liposomes and buffer conditions in binding, zeta potential and isothermal titration calorimetry studies, we found that whereas acylated and unacylated ghrelin were both electrostatically attracted towards the membrane, only acylated ghrelin penetrated into the headgroup and the lipid backbone regions of negatively charged membranes. The O-acylation induced a 120-fold increase in ghrelin local concentration in the membrane. However, acylated ghrelin did not deeply penetrate the membrane nor did it perturb its organisation. Conformational studies by circular dichroism and attenuated total reflection Fourier transformed infrared as well as in silico modelling revealed that both forms of ghrelin mainly adopted the same structure in aqueous, micellar and bilayer environments even though acylated ghrelin structure is slightly more α-helical in a lipid bilayer environment. Altogether our results suggest that membrane acts as a "catalyst" in acylated ghrelin binding to the ghrelin receptor and hence could explain why acylated and unacylated ghrelin are both full agonists of this receptor but in the nanomolar and micromolar range, respectively.

Secondary structure in de novo designed peptides induced by electrostatic interaction with a lipid bilayer membrane

We show that it is possible to induce a defined secondary structure in de novo designed peptides upon electrostatic attachment to negatively charged lipid bilayer vesicles without partitioning of the peptides into the membrane, and that the secondary structure can be varied via small changes in the primary amino acid sequence of the peptides. The peptides have a random-coil conformation in solution, and results from far-UV circular dichroism spectroscopy demonstrate that the structure induced by the interaction with silica nanoparticles is solely alpha-helical and also strongly pH-dependent. The present study shows that negatively charged vesicles, to which the peptides are electrostatically adsorbed via cationic amino acid residues, induce either alpha-helices or beta-sheets and that the conformation is dependent on both lipid composition and variations in peptide primary structure. The pH-dependence of the vesicle-induced peptide secondary structure is weak, which correlates well with small differences in the vesicles' electrophoretic mobility, and thus the surface charge, as the pH is varied.

Protein-solid interactions: important role of solvent, ions, temperature, and buffer in protein binding to alpha-Zr(IV) phosphate

The interaction of proteins with a solid surface involves a complex set of interactions, and elucidating the details of these interactions is essential in the rational design of solid surfaces for applications in biosensors, biocatalysis, and biomedical applications. We examined the enthalpy changes accompanying the binding of met-hemoglobin, met-myoglobin, and lysozyme to layered alpha-Zr(IV)phosphate (20 mM NaPipes, 1 mM TBA, pH 7.2, 298 K) by titration calorimetry, under specific conditions. The corresponding binding enthalpies for the three proteins are -24.2 +/- 2.2, -10.6 +/- 2, and 6.2 +/- 0.2 kcal/mol, respectively. The binding enthalpy depended on the charge of the protein where the binding of positively charged proteins to the negatively charged solid surface was endothermic while the binding of negatively charged proteins to the negatively charged solid was exothermic. These observations are contrary to a simple electrostatic model where binding to the oppositely charged surface is expected to be exothermic. The binding enthalpy depended on the net charge on the protein, ionic strength of the medium, the type of buffer ions present, and temperature. The temperature dependence studies of binding enthalpies resulted in the estimation of heat capacity changes accompanying the binding. The heat capacity changes observed with Hb, Mb, and lysozyme are 1.4 +/- 0.3, 0.89 +/- 0.2, and 0.74 +/- 0.1 kcal/(mol.K), respectively, and these values depended on the net charge of the protein. The enthalpy changes also depended linearly on the enthalpy of ionization of the buffer, and the numbers of protons released per protein estimated from this data are 12.6 +/- 2, 6.0 +/- 1.2, and 1.2 +/- 0.5 for Hb, Mb, and lysozyme, respectively. Binding enthalpies, independent of buffer ionization, are also estimated from these data. Entropy changes are related to the loss in the degrees of freedom when the protein binds to the solid and the displacement of solvent molecules/protons/ions from the protein-solid interface. Proton coupled protein binding is one of the major processes in these systems, which is novel, and the binding enthalpies can be predicted from the net charge of the protein, enthalpy of buffer ionization, ionic strength, and temperature.

Thermodynamics of melittin binding to lipid bilayers. Aggregation and pore formation

Lipid membranes act as catalysts for protein folding. Both alpha-helical and beta-sheet structures can be induced by the interaction of peptides or proteins with lipid surfaces. Melittin, the main component of bee venom, is a particularly well-studied example for the membrane-induced random coil-to-alpha-helix transition. Melittin in water adopts essentially a random coil conformation. The cationic amphipathic molecule has a high affinity for neutral and anionic lipid membranes and exhibits approximately 50-65% alpha-helix conformation in the membrane-bound state. At higher melittin concentrations, the peptide forms aggregates or pores in the membrane. In spite of the long-standing interest in melittin-lipid interactions, no systematic thermodynamic study is available. This is probably caused by the complexity of the binding process. Melittin binding to lipid vesicles is fast and occurs within milliseconds, but the binding process involves at least four steps, namely, (i) the electrostatic attraction of the cationic peptide to an anionic membrane surface, (ii) the hydrophobic insertion into the lipid membrane, (iii) the conformational change from random coil to alpha-helix, and (iv) peptide aggregation in the lipid phase. We have combined microelectrophoresis (measurement of the zeta potential), isothermal titration calorimetry, and circular dichroism spectroscopy to provide a thermodynamic analysis of the individual binding steps. We have compared melittin with a synthetic analogue, [D]-V(5,8),I(17),K(21)-melittin, for which alpha-helix formation is suppressed and replaced by beta-structure formation. The comparison reveals that the thermodynamic parameters for the membrane-induced alpha-helix formation of melittin are identical to those observed earlier for other peptides with an enthalpy h(helix) of -0.7 kcal/mol and a free energy g(helix) of -0.2 kcal/mol per peptide residue. These thermodynamic parameters hence appear to be of general validity for lipid-induced membrane folding. As g(helix) is negative, it further follows that helix formation leads to an enhanced membrane binding for the peptides or proteins involved. In this study, melittin binds by approximately 2 orders of magnitude better to the lipid membrane than [D]-V(5,8),I(17),K(21)-melittin which cannot form an alpha-helix. We also found conditions under which the isothermal titration experiment reports only the aggregation process. Melittin aggregation is an entropy-driven process with an endothermic heat of reaction (DeltaH(agg)) of approximately 2 kcal/mol and an aggregation constant of 20-40 M(-1).

Thermodynamics of partitioning of substance P in isotropic bicelles

The temperature dependence of the partition of a neuropeptide, substance P (SP), in isotropic (q = 0.5) bicelles was investigated by using pulsed field gradient NMR diffusion technique. The partition coefficient decreases as the temperature is increased from 295 to 325 K, indicating a favorable (negative) enthalpy change upon partitioning of the peptide. Thermodynamic analysis of the data shows that the partitioning of SP at 300 K is driven by the enthalpic term (DeltaH) with the value of - 4.03 kcal mol(-1), while it is opposed by the entropic term (-TDeltaS) by approximately 1.28 kcal mol(-1) with a small negative change in heat capacity (DeltaC(p)). The enthalpy-driven process for the partition of SP in bicelles is the same as in dodecylphosphocholine (DPC) micelles, however, the negative entropy change in bicelles of flat bilayer surface is in sharp contrast with the positive entropy change in DPC micelles of highly curved surface, indicating that the curvature of the membrane surface might play a significant role in the partitioning of peptides.

Length dependence of the coil <--> beta-sheet transition in a membrane environment

The most abundant structural element in protein aggregates is the beta-sheet. Designed peptides that fold into a beta-sheet structure upon binding to lipid membranes are useful models to elucidate the thermodynamic characteristics of the random coil <-->beta-structure transition. Here, we examine the effect of strand length on the random coil <--> beta-sheet transition of the (KIGAKI)n peptide with the total chain length varying between 7 and 30 amino acids. The beta-sheet content of the peptides in the presence and absence of membranes was measured with circular dichroism spectroscopy. The peptides were titrated with small unilamellar lipid vesicles, and the thermodynamic binding parameters were determined with isothermal titration calorimetry (ITC). Membrane binding includes at least two processes, namely (i) the transfer of the peptide from the aqueous phase to the lipid surface and (ii) the conformational change from a random coil conformation to a beta-sheet structure. CD spectroscopy and ITC analysis demonstrate that beta-sheet formation depends cooperatively on the peptide chain length with a distinct increase in beta-structure for n > 10-12. Binding to the lipid membrane is an entropy-driven process as the binding enthalpy is always endothermic. The contribution of the beta-sheet folding reaction to the overall process was determined with analogues of the KIGAKI repeat where two adjacent amino acids were replaced by their D-enantiomers. The folding reaction for peptides with n >or= 12 is characterized by a negative free folding energy of DeltaG(degree)beta approximately equal -0.15 kcal/mol per amino acid residue. The folding step proper is exothermic with DeltaH(degree)(beta) approximately equal -0.2 to -0.6 kcal/mol per residue and counteracted by a negative entropy term TDeltaS(degree)(beta) = -0.1 to -0.5 kcal/mol per residue, depending on the chain length (18 <or= n <or= 30). For a short chain with n = 12, beta-sheet formation is unfavorable with DeltaG(degree)beta approximately +0.08 kcal/mol per residue. Small changes of environmental parameters like pH or temperature can thus be anticipated to have profound effects on aggregation reactions, leading to amyloid fibril formation.

Triton X-100 partitioning into sphingomyelin bilayers at subsolubilizing detergent concentrations: effect of lipid phase and a comparison with dipalmitoylphosphatidylcholine

We examined the partitioning of the nonionic detergent Triton X-100 at subsolubilizing concentrations into bilayers of either egg sphingomyelin (SM), palmitoyl SM, or dipalmitoylphosphatidylcholine. SM is known to require less detergent than phosphatidylcholine to achieve the same extent of solubilization, and for all three phospholipids solubilization is temperature dependent. In addition, the three lipids exhibit a gel-fluid phase transition in the 38-41 degrees C temperature range. Experiments have been performed at Triton X-100 concentrations well below the critical micellar concentration, so that only detergent monomers have to be considered. Lipid/detergent mol ratios were never <10:1, thus ensuring that the solubilization stage was never reached. Isothermal titration calorimetry, DSC, and infrared, fluorescence, and (31)P-NMR spectroscopies were applied in the 5-55 degrees C temperature range. The results show that, irrespective of the chemical nature of the lipid, DeltaG degrees of partitioning remained in the range of -27 kJ/mol lipid in the gel phase and of -30 kJ/mol lipid in the fluid phase. This small difference cannot account for the observed phase-dependent differences in solubilization. Such virtually constant DeltaG degrees occurred as a result of the compensation of enthalpic and entropic components, which varied with both temperature and lipid composition. Consequently, the observed different susceptibilities to solubilization cannot be attributed to differential binding but to further events in the solubilization process, e.g., bilayer saturability by detergent or propensity to form lipid-detergent mixed micelles. The data here shed light on the relatively unexplored early stages of membrane solubilization and open new ways to understand the phenomenon of membrane resistance toward detergent solubilization.

Thermodynamics of the Coil ⇆ β-Sheet Transition in a Membrane Environment

Biologically important peptides such as the Alzheimer peptide Abeta(1-40) display a reversible random coil <==>beta-structure transition at anionic membrane surfaces. In contrast to the well-studied random coil left arrow over right arrow alpha-helix transition of amphipathic peptides, there is a dearth on information on the thermodynamic and kinetic parameters of the random coil left arrow over right arrow beta-structure transition. Here, we present a new method to quantitatively analyze the thermodynamic parameters of the membrane-induced beta-structure formation. We have used the model peptide (KIGAKI)(3) and eight analogues in which two adjacent amino acids were substituted by their d-enantiomers. The positions of the d,d pairs were shifted systematically along the three identical segments of the peptide chain. The beta-structure content of the peptides was measured in solution and when bound to anionic lipid membranes with circular dichroism spectroscopy. The thermodynamic binding parameters were determined with isothermal titration calorimetry and the binding isotherms were analysed by combining a surface partition equilibrium with the Gouy-Chapman theory. The thermodynamic parameters were found to be linearly correlated with the extent of beta-structure formation. beta-Structure formation at the membrane surface is characterized by an enthalpy change of DeltaH(beta)=-0.23 kcal/mol per residue, an entropy change of DeltaS(beta)=-0.24 cal/mol K residue and a free energy change of DeltaG(beta)=-0.15 kcal/mol residue. An increase in temperature induces an unfolding of beta-structure. The residual free energy of membrane-induced beta-structure formation is close to that of membrane-induced alpha-helix formation.

Interaction of verapamil with lipid membranes and P-glycoprotein: connecting thermodynamics and membrane structure with functional activity

Verapamil and amlodipine are calcium ion influx inhibitors of wide clinical use. They are partially charged at neutral pH and exhibit amphiphilic properties. The noncharged species can easily cross the lipid membrane. We have measured with solid-state NMR the structural changes induced by verapamil upon incorporation into phospholipid bilayers and have compared them with earlier data on amlodipine and nimodipine. Verapamil and amlodipine produce a rotation of the phosphocholine headgroup away from the membrane surface and a disordering of the fatty acid chains. We have determined the thermodynamics of verapamil partitioning into neutral and negatively charged membranes with isothermal titration calorimetry. Verapamil undergoes a pK-shift of DeltapK(a) = 1.2 units in neutral lipid membranes and the percentage of the noncharged species increases from 5% to 45%. Verapamil partitioning is increased for negatively charged membranes and the binding isotherms are strongly affected by the salt concentration. The electrostatic screening can be explained with the Gouy-Chapman theory. Using a functional phosphate assay we have measured the affinity of verapamil, amlodipine, and nimodipine for P-glycoprotein, and have calculated the free energy of drug binding from the aqueous phase to the active center of P-glycoprotein in the lipid phase. By combining the latter results with the lipid partitioning data it was possible, for the first time, to determine the true affinity of the three drugs for the P-glycoprotein active center if the reaction takes place exclusively in the lipid matrix.

Evidence that membrane insertion of the cytosolic domain of Bcl-xL is governed by an electrostatic mechanism

Signals from different cellular networks are integrated at the mitochondria in the regulation of apoptosis. This integration is controlled by the Bcl-2 proteins, many of which change localization from the cytosol to the mitochondrial outer membrane in this regulation. For Bcl-xL, this change in localization reflects the ability to undergo a conformational change from a solution to integral membrane conformation. To characterize this conformational change, structural and thermodynamic measurements were performed in the absence and presence of lipid vesicles with Bcl-xL. A pH-dependent model is proposed for the solution to membrane conformational change that consists of three stable conformations: a solution conformation, a conformation similar to the solution conformation but anchored to the membrane by its C-terminal transmembrane domain, and a membrane conformation that is fully associated with the membrane. This model predicts that the solution to membrane conformational change is independent of the C-terminal transmembrane domain, which is experimentally demonstrated. The conformational change is associated with changes in secondary and, especially, tertiary structure of the protein, as measured by far and near-UV circular dichroism spectroscopy, respectively. Membrane insertion was distinguished from peripheral association with the membrane by quenching of intrinsic tryptophan fluorescence by acrylamide and brominated lipids. For the cytosolic domain, the free energy of insertion (DeltaG degrees x) into lipid vesicles was determined to be -6.5 kcal mol(-1) at pH 4.9 by vesicle binding experiments. To test whether electrostatic interactions were significant to this process, the salt dependence of this conformational change was measured and analyzed in terms of Gouy-Chapman theory to estimate an electrostatic contribution of DeltaG degrees el approximately -2.5 kcal mol(-1) and a non-electrostatic contribution of DeltaG degrees nel approximately -4.0 kcal mol(-1) to the free energy of insertion, DeltaG degrees x. Calcium, which blocks ion channel activity of Bcl-xL, did not affect the solution to membrane conformational change more than predicted by these electrostatic considerations. The lipid cardiolipin, that is enriched at mitochondrial contact sites and reported to be important for the localization of Bcl-2 proteins, did not affect the solution to membrane conformational change of the cytosolic domain, suggesting that this lipid is not involved in the localization of Bcl-xL in vivo. Collectively, these data suggest the solution to membrane conformational change is controlled by an electrostatic mechanism. Given the distinct biological activities of these conformations, the possibility that this conformational change might be a regulatory checkpoint for apoptosis is discussed.

Dipalmitoylation of a cellular uptake-mediating apolipoprotein E-derived peptide as a promising modification for stable anchorage in liposomal drug carriers

Liposomes equipped with cellular uptake-mediating peptidic vector compounds have attracted much attention as target-specific drug delivery systems. Aside from the development of the target recognition motif itself, vector coupling to liposomes while conserving the active conformation constitutes an important element in carrier development. To elucidate the most efficient way for adsorptive peptide binding to liposomes, we synthesized and characterized two-domain peptides comprising a cationic sequence derived from the binding domain of apolipoprotein E (apoE) for the low-density lipoprotein receptor and different lipid-binding motifs, that is, an amphipathic helix, a transmembrane helix, single fatty acids or two palmitoyl chains. Peptide properties considered relevant for peptide-liposome complexes to initiate an endocytotic cellular uptake such as lipid binding, helicity, stability of anchorage, bilayer-disturbing activity, and toxicity showed that the dipalmitoyl derivative was the most suitable to associate the apoE peptide to the surface of liposomes. The peptide showed pronounced lipid affinity and was stably anchored within the lipid bilayer on a time scale of at least 30 min. The helicity of about 40% in the lipid-bound state and the location of the amphipathic helix on the liposomal surface provided the prerequisites for interaction of the complex with the cell surface-located receptor. The concentration of the dipalmitoylated peptide to permeabilize neutral lipid bilayers (lipid concentration 25 microM) was 0.06 microM and a 2 microM concentration reduced cell viability to about 80%. Efficient internalization of liposomes bearing about 180 peptide derivatives on the surface into brain capillary endothelial cells was monitored by confocal laser scanning microscopy. The concept of complexation using dipalmitoylated peptides may offer an efficient substitute to covalent vector coupling and a prospective way to optimize the capacity of liposomes as drug delivery systems also for different targets.

Membrane interaction of neuropeptide Y detected by EPR and NMR spectroscopy

Neuropeptide Y (NPY) is one of the most abundant peptides in the central nervous system of mammals. It belongs to the best-conserved peptides in nature, i.e., the amino acid sequences of even evolutionary widely separated species are very similar to each other. Using porcine NPY, which differs from human NPY only at position 17 (a leucine residue exchanged for a methionine), labeled with a TOAC spin probe at the 2nd, 32nd, or 34th positions of the peptide backbone, the membrane binding and penetration of NPY was determined using EPR and NMR spectroscopy. The vesicular membranes were composed of phosphatidylcholine and phosphatidylserine at varying mixing ratios. From the analysis of the EPR line shapes, the spectral contributions of free, dimerized, and membrane bound NPY could be separated. This analysis was further supported by quenching experiments, which selected the contributions of the bound NPY fraction. The results of this study give rise to a model where the alpha-helical part of NPY (amino acids 13-36) penetrates the membrane interface. The unstructured N-terminal part (amino acids 1-12) extends into the aqueous phase with occasional contacts with the lipid headgroup region. Besides the mixing ratio of zwitterionic and negatively charged phospholipid species, the electrostatic peptide membrane interactions are influenced by the pH value, which determines the net charge of the peptide resulting in a modified membrane binding affinity. The results of these variations indicate that NPY binding to phospholipid membranes depends strongly on the electrostatic interactions. An estimation of the transfer energy of the peptide from aqueous solution to the membrane interface DeltaG supports the preferential interaction of NPY with negatively charged membranes.

Thermodynamics of lipid–peptide interactions

This review is focused on peptide molecules which exhibit a limited solubility in the aqueous phase and bind to the lipid membrane from the aqueous medium. Surface adsorption, membrane insertion, and specific binding are usually accompanied by changes in the heat content of the system and can be measured conveniently with isothermal titration calorimetry, avoiding the necessity of peptide labeling. The driving forces for peptide adsorption and binding are hydrophobicity, electrostatics, and hydrogen bonding. An exclusively hydrophobic interaction is exemplified by the immunosuppressant drug cyclosporine A. Its insertion into the membrane can be described by a simple partition equilibrium X(b)=K(0)C(eq). If peptide and membrane are both charged, electrostatic interactions are dominant leading to nonlinear binding curves. The concentration of the peptide near the membrane interface can then be much larger than its bulk concentration. Electrostatic effects must be accounted for by means of the Gouy-Chapman theory before conventional binding models can be applied. A small number of peptides and proteins bind with very high affinity to a specific lipid species only. This is illustrated for the lantibiotic cinnamycin (Ro 09-0198) which forms a 1:1 complex with phosphatidyethanolamine with a binding constant of 10(8) M(-1). Membrane adsorption and insertion can be accompanied by conformational transitions facilitated, in part, by hydrogen bonding mechanisms. The two membrane-induced conformational changes to be discussed are the random coil-to-alpha-helix transition of amphipathic peptides and the random coil-to-beta-structure transition of Alzheimer peptides.

The N-terminal α-Helix of Pancreatic Phospholipase A2 Determines Productive-mode Orientation of the Enzyme at the Membrane Surface

Phospholipase A(2) (PLA(2)) hydrolyzes glycerophospholipids to free fatty acid and lyso-phospholipid, which serve as precursors for the biosynthesis of eicosanoids and other lipid-derived mediators of inflammation and allergy. PLA(2) activity strongly increases upon binding to the surface of aggregated phospholipid. The N-terminal approximately ten residue alpha-helix of certain PLA(2) isoforms plays important roles in the interfacial activation of the enzyme by providing residues for membrane binding of PLA(2) and by contributing to the formation of the substrate-binding pocket. However, the relative contributions of the N-terminal alpha-helix and the rest of the protein in membrane binding of PLA(2) and its productive-mode orientation at the membrane surface are not well understood. Here we use a variety of biophysical approaches to determine the role of the N-terminal helix in membrane binding strength, orientation, and activity of human pancreatic PLA(2). While the full-length PLA(2) binds to membranes with a defined orientation, an engineered PLA(2) fragment DeltaN10 that lacks the N-terminal ten residues binds to membranes with weaker affinity and at random orientation, and exhibits approximately 100-fold lower enzymatic activity compared to the full-length PLA(2), indicating the key role of the N terminus in PLA(2) function. The results of polarized infrared spectroscopic experiments permit determination of the orientation of membrane-bound PLA(2) and identification of its interfacial binding surface. Moreover, the full-length PLA(2) demonstrates increased conformational flexibility in solution and is stabilized upon membrane binding, while the DeltaN10 fragment is more rigid than the full-length PLA(2) both in free and membrane-bound states. Our results suggest that the N-terminal alpha-helix supports the activation of PLA(2) by (a) enhancing the membrane binding strength, (b) facilitating a productive-mode orientation of PLA(2) at the membrane surface, and (c) conferring conformational integrity and plasticity to the enzyme.

Plasticity of influenza haemagglutinin fusion peptides and their interaction with lipid bilayers

A detailed molecular dynamics study of the haemagglutinin fusion peptide (N-terminal 20 residues of the HA2 subunits) in a model bilayer has yielded useful information about the molecular interactions leading to insertion into the lipids. Simulations were performed on the native sequence, as well as a number of mutant sequences, which are either fusogenic or nonfusogenic. For the native sequence and fusogenic mutants, the N-terminal 11 residues of the fusion peptides are helical and insert with a tilt angle of approximately 30 degrees with respect to the membrane normal, in very good agreement with experimental data. The tilted insertion of the native sequence peptide leads to membrane bilayer thinning and the calculated order parameters show larger disorder of the alkyl chains. These results indicate that the lipid packing is perturbed by the fusion peptide and could be used to explain membrane fusion. For the nonfusogenic sequences investigated, it was found that most of them equilibrate parallel to the interface plane and do not adopt a tilted conformation. The presence of a charged residue at the beginning of the sequence (G1E mutant) resulted in a more difficult case, and the outcomes do not fall straightforwardly into the general picture. Sequence searches have revealed similarities of the fusion peptide of influenza haemagglutinin with peptide sequences such as segments of porin, amyloid alpha eta peptide, and a peptide from the prion sequence. These results confirm that the sequence can adopt different folds in different environments. The plasticity and the conformational dependence on the local environment could be used to better understand the function of fusion peptides.

Interaction of antiinflammatory drugs with EPC liposomes: calorimetric study in a broad concentration range

Isothermal titration calorimetry was used to characterize and quantify the partition of indomethacin and acemetacin between the bulk aqueous phase and the membrane of egg phosphatidylcholine vesicles. Significant electrostatic effects were observed due to binding of the charged drugs to the membrane, which implied the use of the Gouy-Chapman theory to calculate the interfacial concentrations. The binding/partition phenomenon was quantified in terms of the partition coefficient (K(p)), and/or the equilibrium constant (K(b)). Mathematical expressions were developed, either to encompass the electrostatic effects in the partition model, or to numerically relate partition coefficients and binding constants. Calorimetric titrations conducted under a lipid/drug ratio >100:1 lead to a constant heat release and were used to directly calculate the enthalpy of the process, DeltaH, and indirectly, DeltaG and DeltaS. As the lipid/drug ratio decreased, the constancy of reaction enthalpy was tested in the fitting process. Under low lipid/drug ratio conditions simple partition was no longer valid and the interaction phenomenon was interpreted in terms of binding isotherms. A mathematical expression was deduced for quantification of the binding constants and the number of lipid molecules associated with one drug molecule. The broad range of concentrations used stressed the biphasic nature of the interaction under study. As the lipid/drug ratio was varied, the results showed that the interaction of both drugs does not present a unique behavior in all studied regimes: the extent of the interaction, as well as the binding stoichiometry, is affected by the lipid/drug ratio. The change in these parameters reflects the biphasic behavior of the interaction-possibly the consequence of a modification of the membrane's physical properties as it becomes saturated with the drug.

Halogenation of Drugs Enhances Membrane Binding and Permeation

Halogenation of drugs is commonly used to enhance membrane binding and permeation. We quantify the effect of replacing a hydrogen residue by a chlorine or a trifluoromethyl residue in position C-2 of promazine, perazine, and perphenazine analogues. Moreover, we investigate the influence of the position (C-6 and C-7) of residue CF(3) in benzopyranols. The twelve drugs are characterized by surface activity measurements, which yield the cross-sectional area, the air-water partition coefficient, and the critical micelle concentration. By using the first two parameters (A(D) and K(aw)) and the appropriate membrane packing density, the lipid-water partition coefficients, are calculated in excellent agreement with the lipid-water partition coefficients measured by means of isothermal titration calorimetry for small unilamellar vesicles of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine. Replacement of a hydrogen residue by a chlorine and a trifluoromethyl residue enhances the free energy of partitioning into the lipid membrane, on average by deltaG(lw) approximately -1.3 or -4.5 kJ mol(-1), respectively, and the permeability coefficient by a factor of approximately 2 or approximately 9, respectively. Despite exhibiting practically identical hydrophobicities, the two benzopyranol analogues differ in their permeability coefficients by almost an order of magnitude; this is due to their different cross-sectional areas at the air-water and lipid-water interfaces.

Alpha-synuclein has a high affinity for packing defects in a bilayer membrane: a thermodynamics study

A number of neurodegenerative disorders, including Parkinson's disease, dementia with Lewy bodies, and multiple system atrophy, are characterized by the intracellular deposition of fibrillar aggregates that contain a high proportion of alpha-synuclein (alphaS). The interaction with the membrane-water interface strongly modulates folding and aggregation of the protein. The present study investigates the lipid binding and the coil-helix transition of alphaS, using titration calorimetry, differential scanning calorimetry, and circular dichroism spectroscopy. Titration of the protein with small unilamellar vesicles composed of zwitterionic phospholipids below the chain melting temperature of the lipids yielded exceptionally large exothermic heat values. The sigmoidal titration curves were evaluated in terms of a simple model that assumes saturable binding sites at the vesicle surface. The cumulative heat release and the ellipticity were linearly correlated as a result of simultaneous binding and helix folding. There was no heat release and folding of alphaS in the presence of large unilamellar vesicles, indicating that a small radius of curvature is necessary for the alphaS-membrane interaction. The heat release and the negative heat capacity of the protein-vesicle interaction could not be attributed to the coil-helix transition of the protein alone. We speculate that binding and helix folding of alphaS depends on the presence of defect structures in the membrane-water interface, which in turn results in lipid ordering in the highly curved vesicular membranes. This will be discussed with regard to a possible role of the protein for the stabilization of synaptic vesicle membranes.

Structural effects of covalent inhibition of phospholipase A2 suggest allosteric coupling between membrane binding and catalytic sites

Phospholipase A(2) (PLA(2)) binds to membranes and catalyzes phospholipid hydrolysis, thus initiating the biosynthesis of lipid-derived mediators of inflammation. A snake-venom PLA(2) was completely inhibited by covalent modification of the catalytic histidine 48 by p-bromophenacyl bromide. Moreover, His(48) modification affected PLA(2) structure, its membrane-binding affinity, and the effects of PLA(2) on the membrane structure. The native PLA(2) increased the order parameter of fluid membranes, whereas the opposite effect was observed for gel-state membranes. The data suggest membrane dehydration by PLA(2) and the formation of PLA(2)-membrane hydrogen bonding. The inhibited PLA(2) had lower membrane-binding affinity and exerted weaker effects on membrane hydration and on the lipid-order parameter. Although membrane binding resulted in formation of more flexible alpha-helices in the native PLA(2), which corresponds to faster amide hydrogen exchange, the modified enzyme was more resistant to hydrogen exchange and experienced little structural change upon membrane binding. The data suggest that 1), modification of a catalytic residue of PLA(2) induces conformational changes that propagate to the membrane-binding surface through an allosteric mechanism; 2), the native PLA(2) acquires more dynamic properties during interfacial activation via membrane binding; and 3), the global conformation of the inhibited PLA(2), including the alpha-helices, is less stable and is not influenced by membrane binding. These findings provide further evidence for an allosteric coupling between the membrane-binding (regulatory) site and the catalytic center of PLA(2), which contributes to the interfacial activation of the enzyme.

Interactions of cyclosporines with lipid membranes as studied by solid-state nuclear magnetic resonance spectroscopy and high-sensitivity titration calorimetry

Cyclosporin A (CyA) interacts with lipid membranes. Binding reaction and membrane location of CyA and analogs were examined with 2H-NMR, high-sensitivity isothermal titration calorimetry (ITC), and CD spectroscopy. Effects of CyA and charged analogs on the phosphocholine head group and on the membrane interior were investigated using selectively deuterated phospholipids. Incorporation of cyclosporin generated small disordering of the lipid acyl chains. Binding of CyA and neutral and positively charged analogs to lipid membranes showed endothermic heats of reaction between + 5.9 and + 11.3 kcal/mol, whereas enthalpy of binding was close to zero for the negatively charged derivative. Binding constants of cyclosporines to liposomal membranes were in the range of K(P) = 1650-5560 M(- 1) depending on the cholesterol content. (2)H-NMR provides evidence that CyA is essentially located in the interior of the bilayer membrane. For the charged analogs an additional interaction occurs at the head group level, placing the polar groups of these CyA analogs in the vicinity of the phosphocholine dipoles. The association of CyA and its analogs is accompanied by a positive enthalpy change, which is overcompensated by positive entropy changes. Binding of CyA to lipid membranes thus follows the classical hydrophobic effect, which is in contrast to many other peptide-lipid binding reactions.

Biophysical and structural properties of DNA.diC(14)-amidine complexes. Influence of the DNA/lipid ratio

Cationic liposomes are used as vectors for gene delivery both in vitro and in vivo. Comprehension of both DNA/liposome interactions on a molecular level and a description of structural modifications involved, are prerequisites to an optimization of the transfection protocol and, thus, successful application in therapy. Formation and stability of a DNA/cationic liposome complex were investigated here at different DNA:lipid molar ratios (rho). Isothermal titration calorimetry (ITC) of cationic liposomes with plasmid DNA was used to characterize the DNA-lipid interaction. Two processes were shown to be involved in the complex formation. A fast exothermic process was attributed to the electrostatic binding of DNA to the liposome surface. A subsequent slower endothermic reaction is likely to be caused by the fusion of the two components and their rearrangement into a new structure. Fluorescence and differential scanning calorimetry confirmed this interpretation. A kinetic model analyzes the ITC profile in terms of DNA/cationic liposome interactions.

Binding of the antibacterial peptide magainin 2 amide to small and large unilamellar vesicles

The thermodynamics of binding of the antibacterial peptide magainin 2 amide (M2a) to negatively charged small (SUVs) and large (LUVs) unilamellar vesicles has been studied with isothermal titration calorimetry (ITC) and CD spectroscopy at 45 degrees C. The binding isotherms as well as the ability of the peptide to permeabilize membranes were found to be qualitatively and quantitatively similar for both model membranes. The binding isotherms could be described with a surface partition equilibrium where the surface concentration of the peptide immediately above the plane of binding was calculated with the Gouy-Chapman theory. The standard free energy of binding was deltaG0 approximately -22 kJ/mol and was almost identical for LUVs and SUVs. However, the standard enthalpy and entropy of binding were distinctly higher for LUVs (deltaH0 = -15.1 kJ/mol, deltaS0 = 24.7 J/molK) than for SUVs (deltaH0 = -38.5 kJ/mol, deltaS0 = -55.3 J/molK). This enthalpy-entropy compensation mechanism is explained by differences in the lipid packing. The cohesive forces between lipid molecules are larger in well-packed LUVs and incorporation of M2a leads to a stronger disruption of cohesive forces and to a larger increase in the lipid flexibility than peptide incorporation into the more disordered SUVs. At 45 degrees C the peptide easily translocates from the outer to the inner monolayer as judged from the simulation of the ITC curves.

Phospholipid binding of synthetic talin peptides provides evidence for an intrinsic membrane anchor of talin

Talin, an actin-binding protein, is assumed to anchor at the membrane via an intrinsic amino acid sequence. Three N-terminal talin fragments, 21-39 (S19), 287-304 (H18), and 385-406 (H17) have been proposed as potential membrane anchors. The interaction of the corresponding synthetic peptides with lipid model systems was investigated with CD spectroscopy, isothermal titration calorimetry, and monolayer expansion measurements. The membrane model systems were neutral or negatively charged small unilamellar vesicles or monolayers with a lateral packing density of bilayers (32 mN/m). S19 partitions into charged monolayers/bilayers with a penetration area A(p) = 140 +/- 30 A(2) and a free energy of binding of DeltaG(0) = -5.7 kcal/mol, thereby forming a partially alpha-helical structure. H18 does not interact with lipid monolayers or bilayers. H17 penetrates into neutral and charged monolayers/bilayers with A(p) = 148 +/- 23 A(2) and A(p) = 160 +/- 15 A(2), respectively, forming an alpha-helix in the membrane-bound state. Membrane partitioning is mainly entropy-driven. Under physiological conditions the free energy of binding to negatively charged membranes is DeltaG(0) = -9. 4 kcal/mol with a hydrophobic contribution of DeltaG(h) = -7.8 kcal/mol, comparable to that of post-translationally attached membrane anchors, and an electrostatic contribution of DeltaG(h) = -1.6 kcal/mol. The latter becomes more negative with decreasing pH. We show that H17 provides the binding energy required for a membrane anchor.

Thermodynamics of the alpha-helix-coil transition of amphipathic peptides in a membrane environment: implications for the peptide-membrane binding equilibrium

Amphipathic alpha-helices are the membrane binding motif in many proteins. The corresponding peptides are often random coil in solution but are folded into an alpha-helix upon interaction with the membrane. The energetics of this ubiquitous folding process are still a matter of conjecture. Here, we present a new method to quantitatively analyze the thermodynamics of peptide folding at the membrane interface. We have systematically varied the helix content of a given amphipathic peptide when bound to the membrane and have correlated the thermodynamic binding parameters determined by isothermal titration calorimetry with the alpha-helix content obtained by circular dichroism spectroscopy. The peptides investigated were the antibiotic magainin 2 amide and three analogs in which two adjacent amino acid residues were substituted by their d-enantiomers. The thermodynamic parameters controlling the alpha-helix formation were found to be linearly related to the helicity of the membrane-bound peptides. Helix formation at the membrane surface is characterized by an enthalpy change of DeltaH(helix) approximately -0.7 kcal/mol per residue, an entropy change of DeltaS(helix) approximately -1.9 cal/molK residue and a free energy change of DeltaG(helix)=-0.14 kcal/mol residue. Helix formation is a strong driving force of peptide insertion into the membrane and accounts for about 50 % of the free energy of binding. An increase in temperature entails an unfolding of the membrane-bound helix. The temperature dependence can be described with the Zimm-Bragg theory and the enthalpy of unfolding agrees with that deduced from isothermal titration calorimetry.