Ionization and phase behavior of fatty acids in water: application of the Gibbs phase rule

Interfacial structurization between triolein and water from pH and buffer ions

HYPOTHESIS

Understanding and manipulating the oil/water interface is important across various industries, including food, pharmaceuticals, cosmetics, and detergents. Many of these processes occur under elevated pH conditions in buffer systems, where base-catalyzed hydrolysis of triglyceride ester bonds leads to amphiphilic reaction products such as fatty acids.

EXPERIMENTS

Here, pH-triggered alterations of the triolein/water interface are analyzed in the presence of phosphate (PB) and tris(hydroxymethyl)aminomethane (TRIS). Ellipsometry at the liquid/liquid interface, tensiometry, and scanning small angle X-ray scattering are used to study the formation of structures at the oil/water interface. Confocal Raman microscopy, nuclear magnetic resonance spectroscopy, and in silico modeling analyze compositional changes in the interfacial region.

FINDINGS

pH and buffer ions were discovered to significantly modify the triglyceride/water interface, contrary to the decane/water control. Decreasing interfacial tensions from 32.4 to 2.2 mN/m upon pH increase from 6.5 to 9.5 is seen with multilamellar interfacial layers forming at pH around 9.0 in the presence of TRIS. Oleic acid from triolein hydrolysis and its further interaction with TRIS is held responsible for this. The new understanding can guide the design of pH- and ion-responsive functional materials and optimize industrial processes involving triglyceride/water interfaces.

Liposome-Hydrogel Composites for Controlled Drug Delivery Applications

Various controlled delivery systems (CDSs) have been developed to overcome the shortcomings of traditional drug formulations (tablets, capsules, syrups, ointments, etc.). Among innovative CDSs, hydrogels and liposomes have shown great promise for clinical applications thanks to their cost-effectiveness, well-known chemistry and synthetic feasibility, biodegradability, biocompatibility and responsiveness to external stimuli. To date, several liposomal- and hydrogel-based products have been approved to treat cancer, as well as fungal and viral infections, hence the integration of liposomes into hydrogels has attracted increasing attention because of the benefit from both of them into a single platform, resulting in a multifunctional drug formulation, which is essential to develop efficient CDSs. This short review aims to present an updated report on the advancements of liposome-hydrogel systems for drug delivery purposes.

Deformable Vesicles with Edge Activators for the Transdermal Delivery of Non-Psychoactive Cannabinoids

BACKGROUND

Transdermal delivery of highly lipophilic molecules is challenging due to the strong barrier function of the skin. Vesicles with penetration enhancers are safe and efficient systems that could improve the transdermal delivery of non-psychoactive cannabinoids such as cannabidiol and desoxy-cannabidiol. In the last decades, research interest in desoxy-cannabidiol as a potent drug with anti-nociceptive properties has risen. Still, its scarce market availability poses a limit for both research and clinical applications. Therefore, it is necessary to improve the synthesis to produce sufficient amounts of desoxy-cannabidiol. Moreover, also the formulation aspects for this drug are challenging and require to be addressed to meet an efficient delivery to the patients.

OBJECTIVE

This work aimed to develop innovative phospholipid-based vesicles with propylene glycol (PG), oleic acid (OA), or limonene as edge activators, for the transdermal delivery of highly lipophilic drugs such as non-psychoactive cannabinoids. In particular, desoxy-cannabidiol was selected thanks to its anti-nociceptive activity, and its synthesis was improved enhancing the stereoselectivity of its synthon's production.

METHODS

Desoxy-cannabidiol was synthesized by Lewis acid-mediated condensation of p-mentha-2,8-dien- 1-ol and m-pentylphenol, improving the stereoselectivity of the first synthon's production. Transethosomes containing 20-50% w/w PG, 0.4-0.8% w/w OA, or 0.1-1% w/w limonene were optimized and loaded with cannabidiol or desoxy-cannabidiol (0.07-0.8% w/w, 0.6-7.0 mg/mL). Ex-vivo studies were performed to assess both the skin permeation and accumulation of the cannabinoids, as well as the penetration depth of fluorescein- loaded systems used as models.

RESULTS

An enantioselective bromination was added to the pathway, thus raising the production yield of pmentha- 2,8-dien-1-ol to 81% against 35%, and the overall yield of desoxy-cannabidiol synthesis from 12% to 48%. Optimized transethosomes containing 0.6 mg/mL cannabinoids were prepared with 1:10 PG:lipid weight ratio, 0.54 OA:lipid molar ratio, and 0.3 limonene:lipid molar ratio, showing good nanometric size (208 ± 20.8 nm - 321 ± 26.3 nm) and entrapment efficiency (> 80%). Ex-vivo tests showed both improved skin permeation rates of cannabinoids (up to 21.32 ± 4.27 μg/cm2 cannabidiol), and skin penetration (depth of fluorescein up to 240 μm, with PG).

CONCLUSION

Desoxy-cannabidiol was successfully produced at high yields, and formulated into transethosomes optimized for transdermal delivery. Loaded vesicles showed improved skin penetration of desoxy-cannabidiol, cannabidiol and a lipophilic probe. These results suggest the potential of these carriers for the transdermal delivery of highly lipophilic drugs.

Investigation of the vesicle-to-micelle transition of 11-amino undecanoic acid derived sulphonamide and a comprehensive study of its interaction with protein

In the present manuscript, an amphiphile sulphonamide based surfactant benzenesulphonyl-11-amino sodium undecanoate (BASU) is designed and synthesized. The surface activity of the amphiphile in the solutions is studied at neutral pH so that the resulting amphiphile self-organizes and transfers from large unilamellar vesicles to small micelles from dilute to concentrated solutions. During the aggregate transitions, the common surfactants tend to form the small aggregate at low concentrations; but BASU shows the large vesicle structure at low concentration of ~3 mM and converts into the small micelle at ~9 mM. Therefore, different techniques have been used, such as, tensiometry, conductometry, fluorimetry and DLS and some microscopic characterization, e.g., confocal fluorescence microscopy to reveal the aggregate assembly and transition mechanism. The isothermal titration calorimetry is used for quantitative measurement of thermodynamic properties of self-assembly formation and the process is found spontaneous and entropically favorable. The permeability of the vesicle membrane bilayer is explored by a kinetic study. Effects of salt and cholesterol on the aggregate of respective amphiphile are also investigated. The interaction of surfactant with both human and bovine serum albumin is analyzed through UV-visible and fluorescence techniques to draw a comparative study. Antibacterial activity is tested by both spectral and zone inhibition methods and its application for mixed amphiphiles (e.g., BASU/CTAB) is found. Therefore, according to the ability of formation of unilamellar vesicles (ULV) and its stability, permeability and antibacterial activity, the amphiphile can have potential applications in the medicinal field.

Self-Assembly of Palmitic Acid in the Presence of Choline Hydroxide

To disperse fatty acids in aqueous solution, choline, a quaternary ammonium ion, has been used recently. So far, only the self-assembly of myristic acid (MA) in the presence of choline hydroxide as a function of the molar ratio has been investigated, and, thus, the current understanding of these fatty acid systems is still limited. We investigated the self-assembly of palmitic acid (PA) in the presence of choline hydroxide (ChOH) as a function of the molar ratio (R) between ChOH and PA. The self-assemblies were characterized by phase contrast microscopy, cryo-TEM, small-angle X-ray scattering, and 2H NMR. The ionization state of PA was determined by pH, conductivity, and FT-IR measurements. With increase in R, various self-assembled structures, including vesicles, lamellar phase, rigid membranes (large sheets, tubules, cones, and polyhedrals), and micelles, form in the PA/ChOH system, different from those of the MA/ChOH system. The change in R induces pH variation and, consequently, a change in the PA ionization state, which, in turn, regulates the molecular interactions, including hydrogen bonding and electrostatic interaction, leading to various self-assemblies. Temperature is an important factor used to tune the self-assembly transitions. The fatty acid choline systems studied here potentially may be applicable in medicine, chemical engineering, and biotechnology.

How Digestive Processes Can Affect the Bioavailability of PCBs Associated with Microplastics: A Modeling Study Supported by Empirical Data

The transfer kinetics of plastic-associated chemicals during intestinal digestive processes is unknown. Here, we assessed whether digestive processes affect chemical exchange kinetics on microplastics, using an in vitro gut fluid digestive model mimicking the human upper intestinal tract. Chemical exchange kinetics of microplastics were measured for 10 polychlorinated biphenyls (PCBs) as proxies for the broad class of hydrophobic organic chemicals. Following earlier studies, olive oil was used as a proxy for digestible food, under high and low digestive enzyme activities. The micelle-water and oil-water partition coefficients of the 10 PCBs were also determined to evaluate the relative contribution of each gut component to sorb PCBs. A new biphasic and reversible chemical exchange model, which included the digestion process, fitted well to the empirical data. We demonstrate that the digestive processes that break down contaminated food can lead to a substantial increase in chemical concentration in microplastics by a factor of 10-20, thereby reducing the overall chemical bioavailability in the gastrointestinal tract when compared to a scenario without microplastics. Higher enzyme activities result in more chemicals being released by the digested food, thereby resulting in higher chemical concentrations in the microplastics. While the model-calibrated kinetic parameters are specific to the studied scenario, we argue that the mechanism of the reduced bioavailability of chemicals and the modeling tool developed have generic relevance. These digestive processes should be considered when assessing the risks of microplastics to humans and also biomagnification in aquatic food webs.

Revealing the Impacts of Chemical Complexity on Submicrometer Sea Spray Aerosol Morphology

Sea spray aerosol (SSA) ejected through bursting bubbles at the ocean surface is a complex mixture of salts and organic species. Submicrometer SSA particles have long atmospheric lifetimes and play a critical role in the climate system. Composition impacts their ability to form marine clouds, yet their cloud-forming potential is difficult to study due to their small size. Here, we use large-scale molecular dynamics (MD) simulations as a "computational microscope" to provide never-before-seen views of 40 nm model aerosol particles and their molecular morphologies. We investigate how increasing chemical complexity impacts the distribution of organic material throughout individual particles for a range of organic constituents with varying chemical properties. Our simulations show that common organic marine surfactants readily partition between both the surface and interior of the aerosol, indicating that nascent SSA may be more heterogeneous than traditional morphological models suggest. We support our computational observations of SSA surface heterogeneity with Brewster angle microscopy on model interfaces. These observations indicate that increased chemical complexity in submicrometer SSA leads to a reduced surface coverage by marine organics, which may facilitate water uptake in the atmosphere. Our work thus establishes large-scale MD simulations as a novel technique for interrogating aerosols at the single-particle level.

Minimal Out-of-Equilibrium Metabolism for Synthetic Cells: A Membrane Perspective

Life-like systems need to maintain a basal metabolism, which includes importing a variety of building blocks required for macromolecule synthesis, exporting dead-end products, and recycling cofactors and metabolic intermediates, while maintaining steady internal physical and chemical conditions (physicochemical homeostasis). A compartment, such as a unilamellar vesicle, functionalized with membrane-embedded transport proteins and metabolic enzymes encapsulated in the lumen meets these requirements. Here, we identify four modules designed for a minimal metabolism in a synthetic cell with a lipid bilayer boundary: energy provision and conversion, physicochemical homeostasis, metabolite transport, and membrane expansion. We review design strategies that can be used to fulfill these functions with a focus on the lipid and membrane protein composition of a cell. We compare our bottom-up design with the equivalent essential modules of JCVI-syn3a, a top-down genome-minimized living cell with a size comparable to that of large unilamellar vesicles. Finally, we discuss the bottlenecks related to the insertion of a complex mixture of membrane proteins into lipid bilayers and provide a semiquantitative estimate of the relative surface area and lipid-to-protein mass ratios (i.e., the minimal number of membrane proteins) that are required for the construction of a synthetic cell.

Autocatalytic effect boosts the production of medium-chain hydrocarbons by fatty acid photodecarboxylase

Ongoing climate change is driving the search for renewable and carbon-neutral alternatives to fossil fuels. Photocatalytic conversion of fatty acids to hydrocarbons by fatty acid photodecarboxylase (FAP) represents a promising route to green fuels. However, the alleged low activity of FAP on C2 to C12 fatty acids seemed to preclude the use for synthesis of gasoline-range hydrocarbons. Here, we reveal that Chlorella variabilis FAP (CvFAP) can convert n-octanoic acid in vitro four times faster than n-hexadecanoic acid, its best substrate reported to date. In vivo, this translates into a CvFAP-based production rate over 10-fold higher for n-heptane than for n-pentadecane. Time-resolved spectroscopy and molecular modeling demonstrate that CvFAP's high catalytic activity on n-octanoic acid is, in part, due to an autocatalytic effect of its n-heptane product, which fills the rest of the binding pocket. These results represent an important step toward a bio-based and light-driven production of gasoline-like hydrocarbons.

Novel Chimeric Amino Acid-Fatty Alcohol Ester Amphiphiles Self-Assemble into Stable Primitive Membranes in Diverse Geological Settings

Primitive cells are believed to have been self-assembled vesicular structures with minimal metabolic components, that were capable of self-maintenance and self-propagation in early Earth geological settings. The coevolution and self-assembly of biomolecules, such as amphiphiles, peptides, and nucleic acids, or their precursors, were essential for protocell emergence. Here, we present a novel class of amphiphiles-amino acid-fatty alcohol esters-that self-assemble into stable primitive membrane compartments under a wide range of geochemical conditions. Glycine n-octyl ester (GOE) and isoleucine n-octyl ester (IOE), the condensation ester products of glycine or isoleucine with octanol (OcOH), are expected to form at a mild temperature by wet-dry cycles. The GOE forms micelles in acidic aqueous solutions (pH 2-7) and vesicles at intermediate pH (pH 7.3-8.2). When mixed with cosurfactants (octanoic acid [OcA]; OcOH, or decanol) in different mole fractions [X_Cosurfactant = 0.1-0.5], the vesicle stability range expands significantly to span the extremely acidic to mildly alkaline (pH 2-8) and extremely alkaline (pH 10-11) regions. Only a small mole fraction of cosurfactant [X_Cosurfactant = 0.1] is needed to make stable vesicular structures. Notably, these GOE-based vesicles are also stable in the presence of high concentrations of divalent cations, even at low pHs and in simulated Hadean seawater composition (without sulfate). To better understand the self-assembly behavior of GOE-based systems, we devised complementary molecular dynamics computer simulations for a series of mixed GOE/OcA systems under simulated acidic pHs. The resulting calculated critical packing parameter values and self-assembly behavior were consistent with our experimental findings. The IOE is expected to show similar self-assembly behavior. Thus, amino acid-fatty alcohol esters, a novel chimeric amphiphile class composed of an amino acid head group and a fatty alcohol tail, may have aided in building protocell membranes, which were stable in a wide variety of geochemical circumstances and were conducive to supporting replication and self-maintenance. The present work contributes to our body of work supporting our hypothesis for synergism and coevolution of (proto)biomolecules on early Earth.

Plausible Sources of Membrane-Forming Fatty Acids on the Early Earth: A Review of the Literature and an Estimation of Amounts

The first cells were plausibly bounded by membranes assembled from fatty acids with at least 8 carbons. Although the presence of fatty acids on the early Earth is widely assumed within the astrobiology community, there is no consensus regarding their origin and abundance. In this Review, we highlight three possible sources of fatty acids: (1) delivery by carbonaceous meteorites, (2) synthesis on metals delivered by impactors, and (3) electrochemical synthesis by spark discharges. We also discuss fatty acid synthesis by UV or particle irradiation, gas-phase ion-molecule reactions, and aqueous redox reactions. We compare estimates for the total mass of fatty acids supplied to Earth by each source during the Hadean eon after an extremely massive asteroid impact that would have reset Earth's fatty acid inventory. We find that synthesis on iron-rich surfaces derived from the massive impactor in contact with an impact-generated reducing atmosphere could have contributed ∼10² times more total mass of fatty acids than subsequent delivery by either carbonaceous meteorites or electrochemical synthesis. Additionally, we estimate that a single carbonaceous meteorite would not deliver a high enough concentration of fatty acids (∼15 mM for decanoic acid) into an existing body of water on the Earth's surface to spontaneously form membranes unless the fatty acids were further concentrated by another mechanism, such as subsequent evaporation of the water. Our estimates rely heavily on various assumptions, leading to significant uncertainties; nevertheless, these estimates provide rough order-of-magnitude comparisons of various sources of fatty acids on the early Earth. We also suggest specific experiments to improve future estimates. Our calculations support the view that fatty acids would have been available on the early Earth. Further investigation is needed to assess the mechanisms by which fatty acids could have been concentrated sufficiently to assemble into membranes during the origin of life.

Plausible Sources of Membrane-Forming Fatty Acids on the Early Earth: A Review of the Literature and an Estimation of Amounts

The first cells were plausibly bounded by membranes assembled from fatty acids with at least 8 carbons. Although the presence of fatty acids on the early Earth is widely assumed within the astrobiology community, there is no consensus regarding their origin and abundance. In this Review, we highlight three possible sources of fatty acids: (1) delivery by carbonaceous meteorites, (2) synthesis on metals delivered by impactors, and (3) electrochemical synthesis by spark discharges. We also discuss fatty acid synthesis by UV or particle irradiation, gas-phase ion-molecule reactions, and aqueous redox reactions. We compare estimates for the total mass of fatty acids supplied to Earth by each source during the Hadean eon after an extremely massive asteroid impact that would have reset Earth's fatty acid inventory. We find that synthesis on iron-rich surfaces derived from the massive impactor in contact with an impact-generated reducing atmosphere could have contributed ∼10² times more total mass of fatty acids than subsequent delivery by either carbonaceous meteorites or electrochemical synthesis. Additionally, we estimate that a single carbonaceous meteorite would not deliver a high enough concentration of fatty acids (∼15 mM for decanoic acid) into an existing body of water on the Earth's surface to spontaneously form membranes unless the fatty acids were further concentrated by another mechanism, such as subsequent evaporation of the water. Our estimates rely heavily on various assumptions, leading to significant uncertainties; nevertheless, these estimates provide rough order-of-magnitude comparisons of various sources of fatty acids on the early Earth. We also suggest specific experiments to improve future estimates. Our calculations support the view that fatty acids would have been available on the early Earth. Further investigation is needed to assess the mechanisms by which fatty acids could have been concentrated sufficiently to assemble into membranes during the origin of life.

Novel time-domain NMR-based traits for rapid, label-free Olive oils profiling

Olive oil is one of the oldest and essential edible oils in the market. The classification of olive oils (e.g. extra virgin, virgin, refined) is often influenced by factors ranging from its complex inherent physiochemical properties (e.g. fatty acid profiles) to the undisclosed manufacturing processes. Therefore, olive oils have been the target of adulteration due to its profitable margin. In this work, we demonstrate that multi-parametric time-domain NMR relaxometry can be used to rapidly (in minutes) identify and classify olive oils in label-free and non-destructive manner. The subtle differences in molecular microenvironment of the olive oils induce substantial changes in the relaxation mechanism in the time-domain NMR regime. We demonstrated that the proposed NMR-relaxation based detection (AUC = 0.95) is far more sensitive and specific than the current gold-standards in the field i.e. near-infrared spectroscopy (AUC = 0.84) and Ultraviolet-visible spectroscopy (AUC = 0.73), respectively. We further show that, albeit the inherent complexity of olive plant natural phenotypic variations, the proposed NMR-relaxation based traits may be a viable mean (AUC = 0.71) in tracing the regions of origin for olive trees, in agreement with their geographical orientation.

Optical tweezer platform for the characterization of pH-triggered colloidal transformations in the oleic acid/water system

HYPOTHESIS

Soft colloidal particles that respond to their environment have innovative potential for many fields ranging from food and health to biotechnology and oil recovery. The in situ characterisation of colloidal transformations that triggers the functional response remain a challenge.

EXPERIMENTS

This study demonstrates the combination of an optical micromanipulation platform, polarized optical video microscopy and microfluidics in a comprehensive approach for the analysis of pH-driven structural transformations in emulsions. The new platform, together with synchrotron small angle X-ray scattering, was then applied to research the food-relevant, pH-responsive, oleic acid in water system.

FINDINGS

The experiments demonstrate structural transformations in individual oleic acid particles from micron-sized onion-type multilamellar oleic acid vesicles at pH 8.6, to nanostructured emulsions at pH < 8.0, and eventually oil droplets at pH < 6.5. The smooth particle-water interface of the onion-type vesicles at pH 8.6 was transformed into a rough particle surface at pH below 7.5. The pH-triggered changes of the interfacial tension at the droplet-water interface together with mass transport owing to structural transformations induced a self-propelled motion of the particle. The results of this study contribute to the fundamental understanding of the structure-property relationship in pH-responsive emulsions for nutrient and drug delivery applications.

One-Step Encapsulation of Capsaicin into Chitosan-Oleic Acid Complex Particles: Evaluation of Encapsulation Ability and Stability

Capsaicin (CAP) demonstrates a potential for application in the food and pharmaceutical industries owing to its various attractive health benefits, including anti-cancer, anti-inflammatory, and antioxidant activities. However, the application of CAP is often limited by its low solubility in water, low bioavailability, and strong pungency. In this study, a simple one-step method for the stable encapsulation and dispersion of CAP in aqueous media was developed using polyelectrolyte complex particles formed by chitosan (CHI) and oleic acid (OA). Homogeneous particles with mean diameters below 1 μm were successfully prepared via spontaneous molecular complexation by mixing an aqueous solution of CHI with an ethanolic solution of OA and CAP. CAP was incorporated into the hydrophobic domains of the CHI-OA complex particles through hydrophobic interactions between the alkyl chains of OA and CAP. The factors affecting CAP encapsulation were investigated, and a maximum encapsulation yield of approximately 100% was obtained. The CHI-OA-CAP complex particles could be stored for more than 3 months at room temperature (22-26 °C) without resulting in macroscopic phase separation or degradation of CAP. We believe that our findings provide a useful alternative encapsulation technique for CAP and contribute to expanding its practical application.

Constant pH Coarse-Grained Molecular Dynamics with Stochastic Charge Neutralization

pH dependence abounds in biochemical systems; however, many simulation methods used to investigate these systems do not consider this property. Using a modified version of the hybrid non-equilibrium molecular dynamics (MD)/Monte Carlo algorithm, we include a stochastic charge neutralization method, which is particularly suited to the MARTINI force field and enables artifact-free Ewald summation methods in electrostatic calculations. We demonstrate the efficacy of this method by reproducing pH-dependent self-assembly and self-organization behavior previously reported in experimental literature. In addition, we have carried out experimental oleic acid titrations where we report the results in a more relevant way for the comparison with computational methods than has previously been done.

Investigating the morphological transitions in an associative surfactant ternary system

Associative surfactants systems involving polar oils have recently been shown to stabilize immiscible liquids by forming nanostructures at the liquid interface and have been used to print soft materials. Although these associating surfactant systems show great promise for creating nanostructured soft materials, a fundamental understanding of the self-assembly process is still unknown. In this study, a ternary phase diagram for a system of cationic surfactant cetylpyridinium chloride monohydrate (CPCl), a polar oil (oleic acid), and water is established using experiment and simulation, to study the equilibrium phase behavior. A combination of visual inspection, small-angle X-ray scattering (SAXS), and rheological measurements was employed to establish the phase behavior and properties of the self-assembled materials. Dissipative particle dynamics (DPD) is used to simulate the formation of the morphologies in this system and support the experimental results. The ternary phase diagram obtained from the simulations agrees with the experimental results, indicating the robustness of the computational simulation as a supplement to the mesoscale experimental systems. We observe that morphological transitions (e.g., micelle-to-bilayer and vesicle-to-lamellar) are in agreement between experiments and simulations across the ternary diagram. DPD simulations correctly predict that associative surfactant systems form new nanoscale phases due to the co-assembly of the components. The established ternary phase diagram and the DPD model pave the way towards predicting and controlling the formation of different mesostructures like lamellar or vesicles, opening new avenues to tailor and synthesize desired morphologies for applications related to liquid-in-liquid 3D printing.

A new variant of the human α-lactalbumin-oleic acid complex as an anticancer agent for chronic myeloid leukemia

Chronic myeloid leukemia (CML) is a clonal myeloproliferative disorder of hematopoietic stem cells. Although there have been advancements in treatment, there is still a need to develop a biotherapeutic agent. A new variant of the human alpha-lactalbumin-oleic acid (HALOA) complex has been synthesized, which showed similarities with SNARE. The native α-LA was treated with EDTA to remove Ca²⁺ ions confirmed by ICP-OES and Arsenazo III to unfold and attain apo structure. The apo LA was mixed with OA in a specific ratio, leading to HALOA complex formation. The conformational state from native to complex was elucidated by circular dichroism (far; 190–260 nm and near; 260–340 nm UV-CD), which confirmed that the complex consists of a majority of turns and β-sheet structure. SDS-PAGE result showed the masking effect of OA on apo α-LA. In the lane of the complex, there was no band detected. However, 1-anilino-8-naphthalene sulfonate (ANS) dye has shown maximum fluorescence intensity with the complex because of the availability of hydrophobic patches, which was further validated by NMR spectroscopy indicating the masking effect of OA on the apo α-LA. The SNARE behavior of the complex (500 nm) has been confirmed by TEM. This new structural variant complex shows anti-tumor activity on chronic myeloid leukemia by targeting the IL-8, survivin, and induces apoptosis through DNA fragmentation, but not against normal cells. Overall, the formulated complex shows that SNARE-like behavior can be used as a promising anti-tumor agent with lower toxicity and maximum bioavailability.

Methods for Forming Giant Unilamellar Fatty Acid Vesicles

Fatty acids readily assemble into bilayer membranes at a pH near their apparent pK_a. Fatty acid vesicles are not only useful for research in the fields of origins of life, soft matter science, biophysics, and drug delivery, but are also cost-effective and easy to manipulate, making them ideal for teaching students about self-assembly and lipid bilayers. Here, we describe simple ways to make giant, unilamellar fatty acid vesicles suitable for microscopy and encapsulation studies.

Fatty Acid Photodecarboxylase Is an Interfacial Enzyme That Binds to Lipid-Water Interfaces to Access Its Insoluble Substrate

Fatty acid photodecarboxylase (FAP), one of the few natural photoenzymes characterized so far, is a promising biocatalyst for lipid-to-hydrocarbon conversion using light. However, the optimum supramolecular organization under which the fatty acid (FA) substrate should be presented to FAP has not been addressed. Using palmitic acid embedded in phospholipid liposomes, phospholipid-stabilized microemulsions, and mixed micelles, we show that FAP displays a preference for FAs present in liposomes and at the surface of microemulsions. The kinetics of adsorption onto phospholipid and galactolipid monomolecular films further suggests the ability of FAP to bind to and penetrate into membranes, with a higher affinity in the presence of FAs. The FAP structure reveals a potential interfacial recognition site with clusters of hydrophobic and basic residues surrounding the active site entrance. The resulting dipolar moment suggests the orientation of FAP at negatively charged interfaces. These findings provide important clues about the mode of action of FAP and the development of FAP-based bioconversion processes.

Strong inhibition of peptide amyloid formation by a fatty acid

The aggregation of peptides into amyloid fibrils is associated with several diseases, including Alzheimer’s and Parkinson’s disease. Because hydrophobic interactions often play an important role in amyloid formation, the presence of various hydrophobic or amphiphilic molecules, such as lipids, may influence the aggregation process. We have studied the effect of a fatty acid, linoleic acid, on the fibrillation process of the amyloid-forming model peptide NACore (GAVVTGVTAVA). NACore is a peptide fragment spanning residue 68–78 of the protein α-synuclein involved in Parkinson’s disease. Based primarily on circular dichroism measurements, we found that even a very small amount of linoleic acid can substantially inhibit the fibrillation of NACore. This inhibitory effect manifests itself through a prolongation of the lag phase of the peptide fibrillation. The effect is greatest when the fatty acid is present from the beginning of the process together with the monomeric peptide. Cryogenic transmission electron microscopy revealed the presence of nonfibrillar clusters among NACore fibrils formed in the presence of linoleic acid. We argue that the observed inhibitory effect on fibrillation is due to co-association of peptide oligomers and fatty acid aggregates at the early stage of the process. An important aspect of this mechanism is that it is nonmonomeric peptide structures that associate with the fatty acid aggregates. Similar mechanisms of action could be relevant in amyloid formation occurring in vivo, where the aggregation takes place in a lipid-rich environment.

Thermally Driven Membrane Phase Transitions Enable Content Reshuffling in Primitive Cells

Self-assembling single-chain amphiphiles available in the prebiotic environment likely played a fundamental role in the advent of primitive cell cycles. However, the instability of prebiotic fatty acid-based membranes to temperature and pH seems to suggest that primitive cells could only host prebiotically relevant processes in a narrow range of nonfluctuating environmental conditions. Here we propose that membrane phase transitions, driven by environmental fluctuations, enabled the generation of daughter protocells with reshuffled content. A reversible membrane-to-oil phase transition accounts for the dissolution of fatty acid-based vesicles at high temperatures and the concomitant release of protocellular content. At low temperatures, fatty acid bilayers reassemble and encapsulate reshuffled material in a new cohort of protocells. Notably, we find that our disassembly/reassembly cycle drives the emergence of functional RNA-containing primitive cells from parent nonfunctional compartments. Thus, by exploiting the intrinsic instability of prebiotic fatty acid vesicles, our results point at an environmentally driven tunable prebiotic process, which supports the release and reshuffling of oligonucleotides and membrane components, potentially leading to a new generation of protocells with superior traits. In the absence of protocellular transport machinery, the environmentally driven disassembly/assembly cycle proposed herein would have plausibly supported protocellular content reshuffling transmitted to primitive cell progeny, hinting at a potential mechanism important to initiate Darwinian evolution of early life forms.

Novel oleate hydratases and potential biotechnological applications

Abstract

Oleate hydratase catalyses the addition of water to the CC double bond of oleic acid to produce (R)-10-hydroxystearic acid. The enzyme requires an FAD cofactor that functions to optimise the active site structure. A wide range of unsaturated fatty acids can be hydrated at the C10 and in some cases the C13 position. The substrate scope can be expanded using ‘decoy’ small carboxylic acids to convert small chain alkenes to secondary alcohols, albeit at low conversion rates. Systematic protein engineering and directed evolution to widen the substrate scope and increase the conversion rate is possible, supported by new high throughput screening assays that have been developed. Multi-enzyme cascades allow the formation of a wide range of products including keto-fatty acids, secondary alcohols, secondary amines and α,ω-dicarboxylic acids.

Key points

• Phylogenetically distinct oleate hydratases may exhibit mechanistic differences.

• Protein engineering to improve productivity and substrate scope is possible.

• Multi-enzymatic cascades greatly widen the product portfolio.

Cell medium-dependent dynamic modulation of size and structural transformations of binary phospholipid/ω-3 fatty acid liquid crystalline nano-self-assemblies: Implications in interpretation of cell uptake studies

Lyotropic non-lamellar liquid crystalline (LLC) nanoparticles, with their tunable structural features and capability of loading a wide range of drugs and reporter probes, are emerging as versatile injectable nanopharmaceuticals. Secondary emulsifiers, such as Pluronic block copolymers, are commonly used for colloidal stabilization of LLC nanoparticles, but their inclusion often compromises the biological safety (e.g., poor hemocompatibility and enhanced cytotoxicity) of the formulation. Here, we introduce a library of colloidally stable, structurally tunable, and pH-responsive lamellar and non-lamellar liquid crystalline nanoparticles from binary mixtures of a phospholipid (phosphatidylglycerol) and three types of omega-3 fatty acids (ω-3 PUFAs), prepared in the absence of a secondary emulsifier and organic solvents. We study formulation size distribution, morphological heterogeneity, and the arrangement of their internal self-assembled architectures by nanoparticle tracking analysis, synchrotron small-angle X-ray scattering, and cryo-transmission electron microscopy. The results show the influence of type and concentration of ω-3 PUFAs in nanoparticle structural transitions spanning from a lamellar (L_α) phase to inverse discontinuous (micellar) cubic Fd3m and hexagonal phase (H₂) phases, respectively. We further report on cell-culture medium-dependent dynamic fluctuations in nanoparticle size, number and morphology, and simultaneously monitor uptake kinetics in two human cell lines. We discuss the role of these multiparametric biophysical transformations on nanoparticle-cell interaction kinetics and internalization mechanisms. Collectively, our findings contribute to the understanding of fundamental steps that are imperative for improved engineering of LLC nanoparticles with necessary attributes for pharmaceutical development.

Phase separation property of a hydrophobic deep eutectic solvent-water binary mixture: A molecular dynamics simulation study

Over the past decade, deep eutectic solvents (DESs) have earned applicability in numerous fields as non-flammable, non-volatile, and greener alternatives to conventional organic solvents. In a first of its kind, a hydrophobic DES composed of a 1:1 mixture of oleic acid and lidocaine was recently reported, possessing a lower critical solution temperature in water. The thermoreversible phase property of this DES-water system was utilized to sequester out dye molecules from their aqueous solutions. In this article, we explore the phase separation phenomena for this particular DES in its aqueous solution using an all-atom molecular dynamics simulation. A 50 wt. % solution of the DES in water was studied at three different temperatures (253, 293, and 313 K) to understand the various molecular interactions that dictate the phase segregation property of these systems. In this work, we have elaborated on the importance of hydrogen bonding interactions and the non-bonding interactions between the components and the competition between the two that leads to phase separation. Overall, we observe that the increase in unfavorable interaction between the DES components and water with increasing temperature determines the phase separation behavior. We have also studied the modification in the dynamical properties of water molecules close to the phase boundary. Such molecular insights would be beneficial for designing novel solvent systems that can be used as extraction-based media in industries.

Determination of long-chain fatty acids in anaerobic digester supernatant and olive mill wastewater exploiting an in-syringe dispersive liquid-liquid microextraction and derivatization-free GC-MS method

Long-chain fatty acids (LCFA) are commonly found in lipid-rich wastewaters and are a key factor to monitor the anaerobic digesters. A new simple, fast, precise, and suitable method for routine analysis of LCFA is proposed. The system involves in-syringe-magnetic stirring-assisted dispersive liquid-liquid microextraction (DLLME) prior to gas chromatography-mass spectrometry (GC-MS) without a derivatization process. Calibration curves were prepared in an ethanol solution (R² ≥ 0.996), which was also useful as disperser solvent. Hexane was chosen as the extraction solvent. Several parameters (pH, ionic strength, extraction solvent volume, stirring time) were optimized in multivariate and univariate studies. Limits of detection (LODs) were found in the range 0.01-0.05 mg L^-1 and good precision inter-day (RSDs≤7.9%) and intra-day (RSDs≤4.4%) were obtained. The method was applied to quantify LCFA in supernatants of anaerobic digesters and olive mill wastewaters (OMW). Palmitic, stearic, and oleic acids were the most abundant fatty acid in the analyzed samples and the relative recoveries for all of them were between 81 and 113%.

Fast bilayer-micelle fusion mediated by hydrophobic dipeptides

To understand the transition from inanimate matter to life, we studied a process that directly couples simple metabolism to evolution via natural selection, demonstrated experimentally by Adamala and Szostak. In this process, dipeptides synthesized inside precursors of cells promote absorption of fatty acid micelles to vesicles, inducing their preferential growth and division at the expense of other vesicles. The process is explained on the basis of coarse-grained molecular dynamics simulations, each extending for tens of microseconds, carried out to model fusion between a micelle and a membrane, both made of fatty acids in the absence and presence of hydrophobic dipeptides. In all systems with dipeptides, but not in their absence, fusion events were observed. They involve the formation of a stalk made by hydrophobic chains from the micelle and the membrane, similar to that postulated for vesicle-vesicle fusion. The emergence of a stalk is facilitated by transient clusters of dipeptides, side chains of which form hydrophobic patches at the membrane surface. Committor probability calculations indicate that the size of a patch is a suitable reaction coordinate and allows for identifying the transition state for fusion. Free-energy barrier to fusion is greatly reduced in the presence of dipeptides to only 4-5 kcal/mol, depending on the hydrophobicity of side chains. The mechanism of mediated fusion, which is expected to apply to other small peptides and hydrophobic molecules, provides a robust means by which a nascent metabolism can confer evolutionary advantage to precursors of cells.

Topical Unsaturated Fatty Acid Vesicles Improve Antioxidant Activity of Ammonium Glycyrrhizinate

Linoleic and oleic acids are natural unsaturated fatty acids involved in several biological processes and recently studied as structural components of innovative nanovesicles. The use of natural components in the pharmaceutical field is receiving growing attention from the scientific world. The aim of this research work is to design, to perform physico-chemical characterization and in vitro/in vivo studies of unsaturated fatty acids vesicles containing ammonium glycyrrhizinate, obtaining a new topical drug delivery system. The chosen active substance is well known as an anti-inflammatory compound, but its antioxidant activity is also noteworthy. In this way, the obtained nanocarriers are totally natural vesicles and they have shown to have suitable physico-chemical features for topical administration. Moreover, the proposed nanocarriers have proven their ability to improve the in vitro percutaneous permeation and antioxidant activity of ammonium glycyrrhizinate on human keratinocytes (NCTC 2544 cells). In vivo studies, carried out on human volunteers, have demonstrated the biocompatibility of unsaturated fatty acid vesicles toward skin tissue, indicating a possible clinical application of unsaturated fatty acid vesicles for the treatment of topical diseases.

The liquid crystalline phase behaviour of a nasal formulation modifies the brain disposition of donepezil in rats in the treatment of Alzheimer's disease

Although nanoparticles, polymeric micelles, liposomes, nanoemulsions, and microemulsions were extensively evaluated as formulations for nasal administration of drugs, lyotropic liquid crystal (LLC) mesophases have been few studied. The phase transition from a low-viscosity microemulsion to a more viscous LLC may improve the mucoadhesion of the formulation. Donepezil is a drug administered orally in the treatment of Alzheimer's disease, and with gastrointestinal side effects that are typical of acetylcholinesterase inhibitors. Based on this, donepezil administration by nasal pathway using a mucoadhesive LLC may be a feasible alternative. A colloidal formulation was selected from a ternary diagram, combining CETETH-10, oleic acid, and water (40:45:15, w/w). Donepezil was incorporated into the formulation, and the characterisation included in vitro studies, such as mucoadhesion and drug release. Pharmacokinetics in Wistar rats included evaluations by the nasal pathway with donepezil incorporated into microemulsion. A phase transition from an isotropic to an anisotropic system was observed after the swelling of the microemulsion with artificial nasal fluid (12-20 %). The release of donepezil in vitro occurred in a sustained manner. Significant levels of donepezil were achieved in the brain after nasal administration of the microemulsion, as a promising strategy for the treatment of Alzheimer's disease.

Drug localization and its effect on the physical stability of poloxamer 188-stabilized colloidal lipid emulsions

Colloidal lipid emulsions are a promising formulation option for poorly water-soluble drugs. Due to their complex composition, they provide different sites for the localization of drugs. Drug molecules can be situated in the lipid matrix, in the aqueous phase with its structures formed by an excess of emulsifier or at the droplet interface. The interface and the mechanism of stabilization is mainly characterized by the emulsifier. In this study, the main focus was on the influence of drug localization on the stability of emulsions sterically stabilized with poloxamer188. In addition to 5% of this non-ionic emulsifier, the emulsions contained 10% soybean oil. The localization of the drugs fenofibrate, curcumin, betamethasone valerate, cinnarizine, dibucaine and flufenamic acid within the emulsion system at a physiological pH of 7.4 as well as their influence on emulsion stability were examined. The results indicated that the stability of poloxamer 188-stabilized emulsions can be influenced in a positive or negative way by the localization of drug molecules in the interface of emulsion droplets. Applying cinnarizine as model substance at pH 5, 7.4 and 10, no pronounced change in the localization was detected as a result of alterations in the charge of the drug.

A new methodology to assess the solubility of fatty acids: Impact of food emulsifiers

In food formulations, lipids are normally incorporated as emulsions stabilized by different types of emulsifiers. The emulsifiers can affect fatty acid (FA) solubilization as they can interact with FA. The main purpose of the present work is the development of a methodology to evaluate the FA solubilization in an aqueous medium in the absence and presence of exogenous emulsifiers. To this end, a combination of turbidimetry, oiling off and dynamic light scattering (DLS) was used. The FA solubility, as well as its supramolecular assemblies, were determined by analyzing the changes in the turbidity profile and the corresponding size of particles obtained by DLS. Oleic acid (OA) was used as a model FA and a simulated intestinal fluid (SIF) as the aqueous phase. Emulsifiers of low (Tween 80) and high (protein and polysaccharide) molecular weight were tested. Tween 80 was the only emulsifier that improved OA solubilization, whereas the macromolecules only affected the supramolecular structure that OA adopted, being the structure of these assemblies governed by the emulsifier nature.

An aqueous two-phase system formed in single-component solution of α-ketooctanoic acid

An aqueous two-phase system can form in the single-component solution of α-ketooctanoic acid without any additives.

Influence of drug loading on the physical stability of phospholipid-stabilised colloidal lipid emulsions

When poorly water-soluble drugs are formulated in colloidal lipid emulsions, adequate stability of the emulsion must be ensured. The aim of this work was to investigate different aspects related to drug loading in order to gain a better understanding on how drugs affect the stability of phospholipid-stabilised emulsions. To obtain information on emulsion stability, a rapid and reproduceable shaking test was developed. A passive loading approach was applied for drug loading of the commercially available nanoemulsion Lipofundin® MCT/LCT 10% with seven drugs of different charge and localisation tendency within the emulsion system. Localisation of drug molecules in the droplet interface did not generally lead to destabilisation of the emulsion, whereas the charge of the drug was of decisive importance. Aspects such as the drug concentration, its influence on the pH and the impact of zeta potential changes had an influence on emulsion stability as well. Certain destabilising effects of drugs could be counteracted by modification of the pH. Lipofundin® MCT/LCT 10%, passively loaded with propofol, was compared with two commercially available propofol preparations. No negative effect of the passive loading procedure could be detected.

Dynamics of the vesicles composed of fatty acids and other amphiphile mixtures: unveiling the role of fatty acids as a model protocell membrane

Fundamental research at the interface of chemistry and biology has the potential to shine light on the question of how living cells can be synthesized from inanimate matter thereby providing plausible pathways for the emergence of cellular life. Compartmentalization of different biochemical reactions within a membrane bound water environment is considered an essential first step in any origin of life pathway. It has been suggested that fatty acid-based vesicles can be considered a model protocell having the potential for change via Darwinian evolution. As such, protocell models have the potential to assist in furthering our understanding of the origin of life in the laboratory. Fatty acids, both by themselves and in mixtures with other amphiphiles, can form different self-assembled structures depending on their surroundings. Recent studies of fatty acid-based membranes have suggested likely pathways of protocell growth, division and membrane permeabilisation for the transport of different nutrients, such as nucleotides across the membrane. In this review, different dynamic processes related to the growth and division of the protocell membrane are discussed and possible pathways for transition of the protocell to the modern cell are explored. These areas of research may lead to a better understanding of the synthesis of artificial cell-like entities and thus herald the possibility of creating new form of life distinct from existing biology. Graphical Abstract Table of Content (TOC) only.

Cyclophospholipids Increase Protocellular Stability to Metal Ions

Model protocells have long been constructed with fatty acids, because these lipids are prebiotically plausible and can, at least theoretically, support a protocell life cycle. However, fatty acid protocells are stable only within a narrow range of pH and metal ion concentration. This instability is particularly problematic as the early Earth would have had a range of conditions, and extant life is completely reliant on metal ions for catalysis and the folding and activity of biological polymers. Here, prebiotically plausible monoacyl cyclophospholipids are shown to form robust vesicles that survive a broad range of pH and high concentrations of Mg²⁺ , Ca²⁺ , and Na⁺ . Importantly, stability to Mg²⁺ and Ca²⁺ is improved by the presence of environmental concentrations of Na⁺ . These results suggest that cyclophospholipids, or lipids with similar characteristics, may have played a central role during the emergence of Darwinian evolution.

Unsaturated Fatty Acid-Induced Conformational Transitions and Aggregation of the Repeat Domain of Tau

Background: The intrinsically disordered, amyloidogenic protein Tau associates with diverse classes of molecules, including proteins, nucleic acids, and lipids. Mounting evidence suggests that fatty acid molecules could play a role in the dysfunction of this protein, however, their interaction with Tau remains poorly characterized. Methods: In a bid to elucidate the association of Tau with unsaturated fatty acids at the sub-molecular level, we carried out a variety of solution NMR experiments in combination with circular dichroism and fluorescence measurements. Our study shows that Tau^4RD, the highly basic four-repeat domain of Tau, associates strongly with arachidonic and oleic acid assemblies in a high lipid/protein ratio, perturbing their supramolecular states and itself undergoing time-dependent structural adaptation. The structural signatures of Tau^4RD/fatty acid aggregates appear similar for arachidonic acid and oleic acid, however, they are distinct from those of another prototypical intrinsically disordered protein, α-synuclein, when bound to these lipids, revealing protein-specific conformational adaptations. Both fatty acid molecules are found to invariably promote the self-aggregation of Tau^4RD and of α-synuclein. Conclusions: This study describes the reciprocal influence that Tau^4RD and fatty acids exert on their conformational states, contributing to our understanding of fundamental aspects of Tau/lipid co-assembly.

Electrochemical Synthesis of Tailor-Made Hydrocarbons from Organic Solvent Free Aqueous Fatty Acid Mixtures in a Micro Flow Reactor

The process described in the current paper is an alternative route that allows running the Kolbe electrolysis under economically attractive conditions and thus bringing it closer to an industrial application through novel process conditions, novel reactor technology, and the utilization of low-cost excess renewable electricity. The process allows the conversion of fatty acids into hydrocarbons in aqueous electrolytes without applying organic solvents. Important process parameters such as electrode material costs, surface area, and energy requirements of an electrochemical reactor in MW scale have been calculated. Depending on the fatty acid mixtures chosen, tailor-made product equivalents of jet oil, lamp oil, and diesel fuels can be achieved at high Faraday efficiency and high conversion, yields, and selectivities.

Nanostructure generation during milk digestion in presence of a cell culture model simulating the small intestine

HYPOTHESIS

The development of advanced oral delivery systems for bioactive compounds requires the fundamental understanding of the digestion process within the gastrointestinal tract. Towards this goal, dynamic invitro digestion models, capable of characterising the molecular as well as colloidal aspects of food, together with their biological interactions with relevant invitro cell culture models, are essential.

EXPERIMENTS

In this study, we demonstrate a novel digestion model that combines flow-through time resolved small angle X-ray scattering (SAXS) with an invitro Caco-2/HT-29 cell co-culture model that also contained a mucus layer. This set-up allows the dynamic insitu characterisation of colloidal structures and their transport across a viable intestinal cell layer during simulated digestion.

FINDINGS

An integrated online SAXS - invitro cell co-culture model was developed and applied to study the digestion of nature's own emulsion, milk. The impact of the invitro cell culture on the digestion-triggered formation and evolution of highly ordered nanostructures in milk is demonstrated. Reported is also the crucial role of the mucus layer on top of the cell layer, protecting the cells from degradation by digestive juice components such as lipase. The novel model can open unique possibilities for the dynamic investigation of colloidal structure formation during lipid digestion and their effect on the uptake of bioactive molecules by the cells.

Effects of pH, temperature and shear on the structure-property relationship of lamellar hydrogels from microbial glucolipids probed by in situ rheo-SAXS

Lipid lamellar hydrogels are a class of soft materials composed of a defectuous lipid lamellar phase, where defects are classically stabilized by polymer or surfactant inclusions in lipid membranes. We have recently shown that bolaform microbial glucolipids, composed of a single glucose headgroup and a C18:0 fatty acid, with the carboxylic acid group located opposite to glucose, spontaneously form lamellar hydrogels at room temperature below pH 8. In this work, we combine rheology with small angle X-ray scattering (SAXS), rheo-SAXS, to correlate, in situ, the structural and mechanical properties of microbial glycolipid lamellar hydrogels upon application of three different stimuli: pH, temperature and a shear rate. In all cases we find unusual structural features of the lamellar phase if compared to classical phospholipid lamellar structures: reducing pH from alkaline to acidic induces a sol-to-gel transition during which an increasing elastic modulus is associated with an oscillatory evolution of lamellar d(100) spacing; temperature above Tm and increasing shear induce the formation of spherulitic crumpled domains, instead of a classically-expected lamellar-to-vesicle or lamellar-to-onion phase transitions.

The fatty acid binding protein FABP7 is required for optimal oligodendrocyte differentiation during myelination but not during remyelination

The major constituents of the myelin sheath are lipids, which are made up of fatty acids (FAs). The hydrophilic environment inside the cells requires FAs to be bound to proteins, preventing their aggregation. Fatty acid binding proteins (FABPs) are one class of proteins known to bind FAs in a cell. Given the crucial role of FAs for myelin sheath formation we investigated the role of FABP7, the major isoform expressed in oligodendrocyte progenitor cells (OPCs), in developmental myelination and remyelination. Here, we show that the knockdown of Fabp7 resulted in a reduction of OPC differentiation in vitro. Consistent with this result, a delay in developmental myelination was observed in Fabp7 knockout animals. This delay was transient with full myelination being established before adulthood. FABP7 was dispensable for remyelination, as the knockout of Fapb7 did not alter remyelination efficiency in a focal demyelination model. In summary, while FABP7 is important in OPC differentiation in vitro, its function is not crucial for myelination and remyelination in vivo.

A novel switchable solvent liquid-phase microextraction technique based on the solidification of floating organic droplets: HPLC-FLD analysis of polycyclic aromatic hydrocarbon monohydroxy metabolites in urine samples

A novel switchable solvent liquid-phase microextraction technique, based on the solidification of floating organic droplets (SS-LPME-SFO), was developed for the pretreatment of aqueous samples.

Stability andin vitrodigestion study of curcumin-encapsulated in different milled cellulose particle stabilized Pickering emulsions

Figurein vitrolipolysis of curcumin encapsulated Pickering emulsions stabilized by milled cellulose.