Rapid cross-linking of elastin-like polypeptides with (hydroxymethyl)phosphines in aqueous solution

Mimicking the extracellular world: from natural to fully synthetic matrices utilizing supramolecular biomaterials

The extracellular matrix (ECM) has evolved around complex covalent and non-covalent interactions to create impressive function-from cellular signaling to constant remodeling. A major challenge in the biomedical field is the de novo design and control of synthetic ECMs for applications ranging from tissue engineering to neuromodulation to bioelectronics. As we move towards recreating the ECM's complexity in hydrogels, the field has taken several approaches to recapitulate the main important features of the native ECM (i.e. mechanical, bioactive and dynamic properties). In this review, we first describe the wide variety of hydrogel systems that are currently used, ranging from fully natural to completely synthetic to hybrid versions, highlighting the advantages and limitations of each class. Then, we shift towards supramolecular hydrogels that show great potential for their use as ECM mimics due to their biomimetic hierarchical structure, inherent (controllable) dynamic properties and their modular design, allowing for precise control over their mechanical and biochemical properties. In order to make the next step in the complexity of synthetic ECM-mimetic hydrogels, we must leverage the supramolecular self-assembly seen in the native ECM; we therefore propose to use supramolecular monomers to create larger, hierarchical, co-assembled hydrogels with complex and synergistic mechanical, bioactive and dynamic features.

Brown Adipose Stem Cell-Loaded Resilin Elastic Hydrogel Rebuilds Cardiac Function after Myocardial Infarction via Collagen I/III Reorganisation

Irreversible fibrosis following myocardial infarction (MI) stiffens the infarcted myocardium, which remains challenging to restore. This study aimed to investigate whether the injectable RLP12 hydrogel, derived from recombinant resilin protein, could serve as a vehicle for stem cells to enhance the function of the infarcted myocardium. The RLP12 hydrogel was prepared and injected into the myocardium of rats with MI, and brown adipose-derived mesenchymal stem cells (BADSCs) were loaded. The survival and differentiation of BADSCs in vivo were investigated using immunofluorescence one week and four weeks after treatment, respectively. The heart function, MI area, collagen deposition, and microvessel density were further assessed four weeks after treatment through echocardiography, histology, immunohistochemistry, and immunofluorescence. The RLP12 hydrogel was prepared with a shear modulus of 10-15 kPa. Four weeks after transplantation, the RLP12 hydrogel significantly improved cardiac function by increasing microvessel density and reducing infarct area size and collagen deposition in MI rats. Furthermore, the distribution ratio of collagen III to I increased in both the centre and edge areas of the MI, indicating the improved compliance of the infarct heart. Moreover, the RLP12 hydrogel also promoted the survival and differentiation of BADSCs into cardiac troponin T- and α-smooth muscle-positive cells. The RLP12 hydrogel can be utilised as an injectable vehicle of BADSCs for treating MI and regulating collagen I and III expression profiles to improve the mechanical microenvironment of the infarct site, thereby restoring heart function. The study provides novel insights into the mechanical interactions between the hydrogel and the infarct microenvironment.

"In-situ" formation of elastin-like recombinamer hydrogels with tunable viscoelasticity through efficient one-pot process

Despite the remarkable progress in the generation of recombinant elastin-like (ELR) hydrogels, further improvements are still required to enhance and control their viscoelasticity, as well as limit the use of expensive chemical reagents, time-consuming processes and several purification steps. To alleviate this issue, the reactivity of carboxylic groups from glutamic (E) acid distributed along the hydrophilic block of an amphiphilic ELR (coded as E50I60) with amine groups has been studied through a one-pot amidation reaction in aqueous solutions, for the first time. By means of this approach, immediate conjugation of E50I60 with molecules containing amine groups has been performed with a high yield, as demonstrated by the 1H NMR and MALDI-TOF spectroscopies. This has resulted in the preparation of viscoelastic irreversible hydrogels through the "in-situ" cross-linking of E50I60 with another ELR (coded as VKV24) containing amine groups from lysines (K). The rheology analysis demonstrated that the gelation process takes place following a dual mechanism dependent on the ELR concentration: physical cross-linking of I60 block through the hydrophobic interactions, and covalent cross-linking of E50I60 with VKV24 through the amidation reaction. While the chemical network formed between the hydrophilic E50 block and VKV24 ELR preserves the elasticity of ELR hydrogels, the self-assembly of the I60 block through the hydrophobic interactions provides a tunable physical network. The presented investigation serves as a basis for generating ELR hydrogels with tunable viscoelastic properties promising for tissue regeneration, through an ''in-situ", rapid, scalable, economically and feasible one-pot method.

Artificial structural proteins: Synthesis, assembly and material applications

Structural proteins have evolved over billions of years and offer outstanding mechanical properties, such as resilience, toughness and stiffness. Advances in modular protein engineering, polypeptide modification, and synthetic biology have led to the development of novel biomimetic structural proteins to perform in biomedical and military fields. However, the development of customized structural proteins and assemblies with superior performance remains a major challenge, due to the inherent limitations of biosynthesis, difficulty in mimicking the complexed macroscale assembly, etc. This review summarizes the approaches for the design and production of biomimetic structural proteins, and their chemical modifications for multiscale assembly. Furthermore, we discuss the function tailoring and current applications of biomimetic structural protein assemblies. A perspective of future research is to reveal how the mechanical properties are encoded in the sequences and conformations. This review, therefore, provides an important reference for the development of structural proteins-mimetics from replication of nature to even outperforming nature.

Recent Advances in the Development of Biomimetic Materials

In this review, we focused on recent efforts in the design and development of materials with biomimetic properties. Innovative methods promise to emulate cell microenvironments and tissue functions, but many aspects regarding cellular communication, motility, and responsiveness remain to be explained. We photographed the state-of-the-art advancements in biomimetics, and discussed the complexity of a "bottom-up" artificial construction of living systems, with particular highlights on hydrogels, collagen-based composites, surface modifications, and three-dimensional (3D) bioprinting applications. Fast-paced 3D printing and artificial intelligence, nevertheless, collide with reality: How difficult can it be to build reproducible biomimetic materials at a real scale in line with the complexity of living systems? Nowadays, science is in urgent need of bioengineering technologies for the practical use of bioinspired and biomimetics for medicine and clinics.

Cancer Immunotherapy Using Bioengineered Micro/Nano Structured Hydrogels

Hydrogels, a class of materials with a 3D network structure, are widely used in various applications of therapeutic delivery, particularly cancer therapy. Micro and nanogels as miniaturized structures of the bioengineered hydrogels may provide extensive benefits over the common hydrogels in encapsulation and controlled release of small molecular drugs, macromolecular therapeutics, and even cells. Cancer immunotherapy is rapidly developing, and micro/nanostructured hydrogels have gained wide attention regarding their engineered payload release properties that enhance systemic anticancer immunity. Additionally, they are a great candidate due to their local administration properties with a focus on local immune cell manipulation in favor of active and passive immunotherapies. Although applied locally, such micro/nanostructured can also activate systemic antitumor immune responses by releasing nanovaccines safely and effectively inhibiting tumor metastasis and recurrence. However, such hydrogels are mostly used as locally administered carriers to stimulate the immune cells by releasing tumor lysate, drugs, or nanovaccines. In this review, the latest developments in cancer immunotherapy are summarized using micro/nanostructured hydrogels with a particular emphasis on their function depending on the administration route. Moreover, the potential for clinical translation of these hydrogel-based cancer immunotherapies is also discussed.

Protein-Based Hydrogels and Their Biomedical Applications

Hydrogels made from proteins are attractive materials for diverse medical applications, as they are biocompatible, biodegradable, and amenable to chemical and biological modifications. Recent advances in protein engineering, synthetic biology, and material science have enabled the fine-tuning of protein sequences, hydrogel structures, and hydrogel mechanical properties, allowing for a broad range of biomedical applications using protein hydrogels. This article reviews recent progresses on protein hydrogels with special focus on those made of microbially produced proteins. We discuss different hydrogel formation strategies and their associated hydrogel properties. We also review various biomedical applications, categorized by the origin of protein sequences. Lastly, current challenges and future opportunities in engineering protein-based hydrogels are discussed. We hope this review will inspire new ideas in material innovation, leading to advanced protein hydrogels with desirable properties for a wide range of biomedical applications.

Atomic Force Microscopy Imaging of Elastin Nanofibers Self-Assembly

Elastin is an extracellular matrix protein, providing elasticity to the organs, such as skin, blood vessels, lungs and elastic ligaments, presenting self-assembling ability to form elastic fibers. The elastin protein, as a component of elastin fibers, is one of the major proteins found in connective tissue and is responsible for the elasticity of tissues. It provides resilience to the human body, assembled as a continuous mesh of fibers that require to be deformed repetitively and reversibly. Thus, it is of great importance to investigate the development of the nanostructural surface of elastin-based biomaterials. The purpose of this research was to image the self-assembling process of elastin fiber structure under different experimental parameters such as suspension medium, elastin concentration, temperature of stock suspension and time interval after the preparation of the stock suspension. atomic force microscopy (AFM) was applied in order to investigate how different experimental parameters affected fiber development and morphology. The results demonstrated that through altering a number of experimental parameters, it was possible to affect the self-assembly procedure of elastin fibers from nanofibers and the formation of elastin nanostructured mesh consisting of naturally occurring fibers. Further clarification of the contribution of different parameters on fibril formation will enable the design and control of elastin-based nanobiomaterials with predetermined characteristics.

Cryopreservation of Cell Sheets for Regenerative Therapy: Application of Vitrified Hydrogel Membranes

Organ transplantation is the first and most effective treatment for missing or damaged tissues or organs. However, there is a need to establish an alternative treatment method for organ transplantation due to the shortage of donors and viral infections. Rheinwald and Green et al. established epidermal cell culture technology and successfully transplanted human-cultured skin into severely diseased patients. Eventually, artificial cell sheets of cultured skin were created, targeting various tissues and organs, including epithelial sheets, chondrocyte sheets, and myoblast cell sheets. These sheets have been successfully used for clinical applications. Extracellular matrix hydrogels (collagen, elastin, fibronectin, and laminin), thermoresponsive polymers, and vitrified hydrogel membranes have been used as scaffold materials to prepare cell sheets. Collagen is a major structural component of basement membranes and tissue scaffold proteins. Collagen hydrogel membranes (collagen vitrigel), created from collagen hydrogels through a vitrification process, are composed of high-density collagen fibers and are expected to be used as carriers for transplantation. In this review, the essential technologies for cell sheet implantation are described, including cell sheets, vitrified hydrogel membranes, and their cryopreservation applications in regenerative medicine.

Thermoresponsive and Injectable Hydrogel for Tissue Agnostic Regeneration

Injectable hydrogels can support the body's innate healing capability by providing a temporary matrix for host cell ingrowth and neovascularization. The clinical adoption of current injectable systems remains low due to their cumbersome preparation requirements, device malfunction, product dislodgment during administration, and uncontrolled biological responses at the treatment site. To address these challenges, a fully synthetic and ready-to-use injectable biomaterial is engineered that forms an adhesive hydrogel that remains at the administration site regardless of defect anatomy. The product elicits a negligible local inflammatory response and fully resorbs into nontoxic components with minimal impact on internal organs. Preclinical animal studies confirm that the engineered hydrogel upregulates the regeneration of both soft and hard tissues by providing a temporary matrix to support host cell ingrowth and neovascularization. In a pilot clinical trial, the engineered hydrogel is successfully administered to a socket site post tooth extraction and forms adhesive hydrogel that stabilizes blood clot and supports soft and hard tissue regeneration. Accordingly, this injectable hydrogel exhibits high therapeutic potential and can be adopted to address multiple unmet needs in different clinical settings.

Recent insights into polysaccharide-based hydrogels and their potential applications in food sector: A review

Hydrogels are ideal for various food applications because of their softness, elasticity, absorbent nature, flexibility, and hygroscopic nature. Polysaccharide hydrogels are particularly suitable because of the hydrophilic nature, their food compatibility, and their non-immunogenic character. Such hydrogels offer a wide range of successful applications such as food preservation, pharmaceuticals, agriculture, and food packaging. Additionally, polysaccharide hydrogels have proven to play a significant role in the formulation of food flavor carrier systems, thus diversifying the horizons of newer developments in food processing sector. Polysaccharide hydrogels are comprised of natural polymers such as alginate, chitosan, starch, pectin and hyaluronic acid when crosslinked physically or chemically. Hydrogels with interchangeable, antimicrobial and barrier properties are referred to as smart hydrogels. This review brings together the recent and relevant polysaccharide research in these polysaccharide hydrogel applications areas and seeks to point the way forward for future research and interventions. Applications in carrying out the process of flavor carrier system directly through their incorporation in food matrices, broadening the domain for food application innovations. The classification and important features of polysaccharide-based hydrogels in food processing are the topics of the current review study.

Effect of Cross-Linkers on Mussel- and Elastin-Inspired Adhesives on Physiological Substrates

Surgical adhesives can be useful in wound closure because they reduce the risk of infection and pain associated with sutures and staples. However, there are no commercially available surgical adhesives for soft tissue wound closure. To be effective, soft tissue adhesives must be soft and flexible, strongly cohesive and adhesive, biocompatible, and effective in a moist environment. To address these criteria, we draw inspiration from the elasticity and resilience of elastin proteins and the adhesive of marine mussels. We used an elastin-like polypeptide (ELP) for the backbone of our adhesive material due to its elasticity and biocompatibility. A mussel-inspired adhesive molecule, l-3,4-dihydroxyphenylalanine (DOPA), was incorporated into the adhesive to confer wet-setting adhesion. In this study, an ELP named YKV was designed to include tyrosine residues and lysine residues, which contain amine groups. A modified version of YKV, named mYKV, was created through enzymatic conversion of tyrosine residues into DOPA. The ELPs were combined with iron(III) nitrate, sodium periodate, and/or tris(hydroxymethyl)phosphine (THP) cross-linkers to investigate the effect of DOPA- and amine-based cross-linking on adhesion strength and cure time on porcine skin in a warm, humid environment. Incorporation of DOPA into the ELP increased adhesive strength by 2.5 times and reduced failure rates. Iron cross-linkers improved adhesion in the presence of DOPA. THP increased adhesion for all proteins tested even in the absence of DOPA. Using multiple cross-linkers in a single formulation did not significantly improve adhesion. The adhesives with the highest performance (iron nitrate mixed with mYKV and THP mixed with YKV or mYKV) on porcine skin had 10-18 times higher adhesion than a commercial sealant and reached appreciable adhesive strength within 10 min.

Molecular bases for temperature sensitivity in supramolecular assemblies and their applications as thermoresponsive soft materials

Thermoresponsive supramolecular assemblies have been extensively explored in diverse formats, from injectable hydrogels to nanoscale carriers, for a variety of applications including drug delivery, tissue engineering and thermo-controlled catalysis. Understanding the molecular bases behind thermal sensitivity of materials is fundamentally important for the rational design of assemblies with optimal combination of properties and predictable tunability for specific applications. In this review, we summarize the recent advances in this area with a specific focus on the parameters and factors that influence thermoresponsive properties of soft materials. We summarize and analyze the effects of structures and architectures of molecules, hydrophilic and lipophilic balance, concentration, components and external additives upon the thermoresponsiveness of the corresponding molecular assemblies.

Soft Hydrogel Inspired by Elastomeric Proteins

Elastin polypeptides based on -VPGVG- repeated motifs are widely used in the production of biomaterials because they are stimuli-responsive systems. On the other hand, glycine-rich sequences, mainly present in tropoelastin terminal domains, are responsible for the elastin self-assembly. In a previous study, we have recombinantly expressed a chimeric polypeptide, named resilin, elastin, and collagen (REC), inspired by glycine-rich motifs of elastin and containing resilin and collagen sequences as well. Herein, a three-block polypeptide, named (REC)₃, was expressed starting from the previous monomer gene by introducing key modifications in the sequence. The choice was mandatory because the uneven distribution of the cross-linking sites in the monomer precluded the hydrogel production. In this work, the cross-linked polypeptide appeared as a soft hydrogel, as assessed by rheology, and the linear un-cross-linked trimer self-aggregated more rapidly than the REC monomer. The absence of cell-adhesive sequences did not affect cell viability, while it was functional to the production of a material presenting antiadhesive properties useful in the integration of synthetic devices in the body and preventing the invasion of cells.

Extracellular Matrix-Mimetic Hydrogels for Treating Neural Tissue Injury: A Focus on Fibrin, Hyaluronic Acid, and Elastin-Like Polypeptide Hydrogels

Neurological and functional recovery is limited following central nervous system injury and severe injury to the peripheral nervous system. Extracellular matrix (ECM)-mimetic hydrogels are of particular interest as regenerative scaffolds for the injured nervous system as they provide 3D bioactive interfaces that modulate cellular response to the injury environment and provide naturally degradable scaffolding for effective tissue remodeling. In this review, three unique ECM-mimetic hydrogels used in models of neural injury are reviewed: fibrin hydrogels, which rely on a naturally occurring enzymatic gelation, hyaluronic acid hydrogels, which require chemical modification prior to chemical crosslinking, and elastin-like polypeptide (ELP) hydrogels, which exhibit a temperature-sensitive gelation. The hydrogels are reviewed by summarizing their unique biological properties, their use as drug depots, and their combination with other biomaterials, such as electrospun fibers and nanoparticles. This review is the first to focus on these three ECM-mimetic hydrogels for their use in neural tissue engineering. Additionally, this is the first review to summarize the use of ELP hydrogels for nervous system applications. ECM-mimetic hydrogels have shown great promise in preclinical models of neural injury and future advancements in their design and use can likely lead to viable treatments for patients with neural injury.

Albumin-based dynamic double cross-linked hydrogel with self-healing property for antimicrobial application

Hydrogels as ideal material are widely used in biomedical field against bacterial infection. Hydrogels synthesized from natural protein possess better biocompatibility than that synthesized from synthetic polymers. In this work, we designed bovine serum albumin (BSA) based hydrogel via double dynamic crosslinking. The cleavage and rearrangement of disulfide bonds of BSA triggered by glutathione (GSH) forms a disulfide bridge network, and tetrakis (hydroxymethyl) phosphonium sulfate (THPS) grafts the amino groups of BSA by a Mannich-type reaction to form a second network. Integrating THPS into the BSA/GSH system enables gel formation and endows excellent antimicrobial properties. Rheological tests showed the hydrogel featuring elasticity, good mechanical strength and self-healing properties. Antibacterial and cytotoxicity tests proved the hydrogel excellent bacteriostatic ability and low cytotoxicity. This albumin-based hydrogel with low cost is expected to realize wide biomedical applications.

Effect of amino acid composition of elastin-like polypeptide nanoparticles on nonspecific protein adsorption, macrophage cell viability and phagocytosis

Development of elastin-like polypeptide (ELP) biomaterials is widespread, but information critical for clinical deployment is limited, with biocompatibility studies focused on a narrow cross-section of ELP sequences. Macrophages can impair biomaterial systems by degrading or isolating the biomaterial and by activating additional immune functions. Their phagocytic response will reveal early immune biocompatibility of ELP nanoparticles (NPs). This study examines that response, induced by the adsorbed protein corona, as a function of ELP guest amino acid, chain length and NP diameter. The breadth of proteins adsorbed to ELP NPs varied, with valine-containing ELP NPs adsorbing fewer types of proteins than leucine-containing constructs. Particle diameter was also a factor, with smaller leucine-containing ELP NPs adsorbing the broadest range of proteins. Macrophage viability was unaffected by the ELP NPs, and their phagocytic capabilities were unimpeded except when incubated with a 500 nm valine-containing 40-mer. This NP significantly decreased the phagocytic capacity of macrophages relative to the control and to a corresponding 500 nm leucine-containing 40-mer. NP size and the proportion of opsonin to dysopsonin proteins likely influenced this outcome. These results suggest that certain combinations of ELP sequence and particle size can result in an adsorbed protein corona, which may hinder macrophage function.

Photocrosslinked, Tunable Protein Vesicles for Drug Delivery Applications

Recombinant proteins have emerged as promising building blocks for vesicle self-assembly because of their versatility through genetic manipulation and biocompatibility. Vesicles composed of thermally responsive elastin-like polypeptide (ELP) fusion proteins encapsulate cargo during assembly. However, vesicle stability in physiological environments remains a significant challenge for biofunctional applications. Here, incorporation of an unnatural amino acid, para-azido phenylalanine, into the ELP domain is reported to enable photocrosslinking of protein vesicles and tuning of vesicle size and swelling. The size of the vesicles can be tuned by changing ELP hydrophobicity and ionic strength. Protein vesicles are assessed for their ability to encapsulate doxorubicin and dually deliver doxorubicin and fluorescent protein in vitro as a proof of concept. The resulting photocrosslinkable vesicles made from full-sized, functional proteins show high potential in drug delivery applications, especially for small molecule/protein combination therapies or targeted therapies.

Switchable Self-Assembly of Elastin- and Resilin-Based Block Copolypeptides with Converse Phase Transition Behaviors

Self-assembly of thermally responsive polypeptides into unique nanostructures offers intriguing attributes including dynamic physical dimensions, biocompatibility, and biodegradability for the smart bio-nanomaterials. As elastin-based polypeptide (EBP) fusion proteins with lower critical solution temperature (LCST) are studied as drug delivery systems, EBP block copolypeptides with the resilin-based polypeptide (RBP) displaying an upper critical solution temperature (UCST) have been of great interest. In this study, we report thermally triggered, dynamic self-assembly of EBP- and RBP-based diblock copolypeptides into switched nanostructures with reversibility under physiological conditions. Molecular DNA clones encoding for the EBP-RBP diblocks at different block length ratios were biosynthesized via recursive directional ligation and overexpressed, followed by nonchromatographic purification by inverse transition cycling. Genetically engineered diblock copolypeptides composed of the EBP with an LCST and the RBP with a UCST showed converse phase transition behaviors with both a distinct LCST and a distinct UCST (LCST < UCST). As temperature increased, three phases of these EBP-RBP diblocks were observed: (1) self-assembled micelles or vesicles below both LCST and UCST, (2) whole aggregates above LCST and below UCST, and (3) reversed micelles above both LCST and UCST. In conclusion, these stimuli-triggered, dynamic protein-based nanostructures are promising for advanced drug delivery systems, regenerative medicine, and biomedical nanotechnology.

Emerging Role of Elastin-Like Polypeptides in Regenerative Medicine

Significance: Wound dressing based on naturally derived polymer provides a useful platform for treatment of skin injuries. Owing to the high mechanical strength and tunable structural and physicochemical properties of human elastin-like polypeptides (ELPs), they may be used as excellent materials for fabricating biocompatible scaffolds and other products for wound management. Recent Advances: Designing recombinant ELPs mimicking natural elastin to fabricate synthetic polymers suitable for human health care has generated significant interest. ELP-based cell-adhesive biopolymers have been used as an alternative for successful sutureless wound closure due to the physicochemical characteristics of the extracellular matrix. Critical Issues: Different systems of ELPs are being developed in the form of scaffolds, films, hydrogels, photo-linkable sheets, and composites linked with various types of growth factors for wound healing application. However, optimizing the quality and safety attributes for specific application needs designing of recombinant ELPs with structural and functional modifications as needed for the intervention. Future Direction: Chronic wounds are difficult to treat as the wound repair process is interrupted by conditions such as excessive inflammation, impaired extracellular matrix formation, and persistent infections. Conventional therapies such as skin substitutes or autologous skin grafts, in many cases, are unable to reestablish tissue homeostasis and proper healing. The development of innovative materials could induce a better regenerative healing response. In this study, we are reviewing different types of elastin-based materials for wound care application and their future prospects in regenerative medicine.

Recent Advances in Injectable Hydrogels for Controlled and Local Drug Delivery

Injectable hydrogels have received considerable interest in the biomedical field due to their potential applications in minimally invasive local drug delivery, more precise implantation, and site-specific drug delivery into poorly reachable tissue sites and into interface tissues, where wound healing takes a long time. Injectable hydrogels, such as in situ forming and/or shear-thinning hydrogels, can be generated using chemically and/or physically crosslinked hydrogels. Yet, for controlled and local drug delivery applications, the ideal injectable hydrogel should be able to provide controlled and sustained release of drug molecules to the target site when needed and should limit nonspecific drug molecule distribution in healthy tissues. Thus, such hydrogels should sense the environmental changes that arise in disease states and be able to release the optimal amount of drug over the necessary time period to the target region. To address this, researchers have designed stimuli-responsive injectable hydrogels. Stimuli-responsive hydrogels change their shape or volume when they sense environmental stimuli, e.g., pH, temperature, light, electrical signals, or enzymatic changes, and deliver an optimal concentration of drugs to the target site without affecting healthy tissues.

Elastin-Like Polypeptides for Biomedical Applications

Elastin-like polypeptides (ELPs) are stimulus-responsive biopolymers derived from human elastin. Their unique properties—including lower critical solution temperature phase behavior and minimal immunogenicity—make them attractive materials for a variety of biomedical applications. ELPs also benefit from recombinant synthesis and genetically encoded design; these enable control over the molecular weight and precise incorporation of peptides and pharmacological agents into the sequence. Because their size and sequence are defined, ELPs benefit from exquisite control over their structure and function, qualities that cannot be matched by synthetic polymers. As such, ELPs have been engineered to assemble into unique architectures and display bioactive agents for a variety of applications. This review discusses the design and representative biomedical applications of ELPs, focusing primarily on their use in tissue engineering and drug delivery.

Supercharged Proteins and Polypeptides

Electrostatic interactions play a vital role in nature. Biomacromolecules such as proteins are orchestrated by electrostatics, among other intermolecular forces, to assemble and organize biochemistry. Natural proteins with a high net charge exist in a folded state or are unstructured and can be an inspiration for scientists to artificially supercharge other protein entities. Recent findings show that supercharging proteins allows for control of their properties such as temperature resistance and catalytic activity. One elegant method to transfer the favorable properties of supercharged proteins to other proteins is the fabrication of fusions. Genetically engineered, supercharged unstructured polypeptides (SUPs) are just one promising fusion tool. SUPs can also be complexed with artificial entities to yield thermotropic and lyotropic liquid crystals and liquids. These architectures represent novel bulk materials that are sensitive to external stimuli. Interestingly, SUPs undergo fluid-fluid phase separation to form coacervates. These coacervates can even be directly generated in living cells or can be combined with dissipative fiber assemblies that induce life-like features. Supercharged proteins and SUPs are developed into exciting classes of materials. Their synthesis, structures, and properties are summarized. Moreover, potential applications are highlighted and challenges are discussed.

Engineering the Architecture of Elastin-Like Polypeptides: From Unimers to Hierarchical Self-Assembly

Well-defined tunable nanostructures formed through the hierarchical self-assembly of peptide building blocks have drawn significant attention due to their potential applications in biomedical science. Artificial protein polymers derived from elastin-like polypeptides (ELPs), which are based on the repeating sequence of tropoelastin (the water-soluble precursor to elastin), provide a promising platform for creating nanostructures due to their biocompatibility, ease of synthesis, and customizable architecture. By designing the sequence and composition of ELPs at the gene level, their physicochemical properties can be controlled to a degree that is unmatched by synthetic polymers. A variety of ELP-based nanostructures are designed, inspired by the self-assembly of elastin and other proteins in biological systems. The choice of building blocks determines not only the physical properties of the nanostructures, but also their self-assembly into architectures ranging from spherical micelles to elongated nanofibers. This review focuses on the molecular determinants of ELP and ELP-hybrid self-assembly and formation of spherical, rod-like, worm-like, fibrillar, and vesicle architectures. A brief discussion of the potential biomedical applications of these supramolecular assemblies is also included.

Temperature-Responsive Multifunctional Protein Hydrogels with Elastin-like Polypeptides for 3-D Angiogenesis

Supramolecular protein hydrogels with tunable properties represent promising candidates for advanced designer extracellular matrices (ECMs). To control cellular functions, ECMs should be able to spatiotemporally regulate synergistic signaling between transmembrane receptors and growth factor (GF) receptors. In this study, we developed genetically engineered temperature-responsive multifunctional protein hydrogels. The designed hydrogel was fabricated by combining the following four peptide blocks: thermosensitive elastin-like polypeptides (ELPs), a polyaspartic acid (polyD) chain to control aggregation and delivery of GFs, a de novo-designed helix peptide that forms antiparallel homotetrameric coiled-coils, and a biofunctional peptide. The resultant coiled-coil unit bound ELPs (CUBEs) exhibit a controllable sol-gel transition with tunable mechanical properties. CUBEs were functionalized with bone sialoprotein-derived RGD (bRGD), and human umbilical vein endothelial cells (HUVECs) were three-dimensionally cultured in bRGD-modified CUBE (bRGD-CUBE) hydrogels. Proangiogenic activity of HUVECs was promoted by bRGD. Moreover, heparin-binding angiogenic GFs were immobilized to bRGD-CUBEs via electrostatic interactions. HUVECs cultured in GF-tethered bRGD-CUBE hydrogels formed three-dimensional (3-D) tubulelike structures. The designed CUBE hydrogels may demonstrate utility as advanced smart biomaterials for biomedical applications. Further, the protein hydrogel design strategy may provide a novel platform for constructing designer 3-D microenvironments for specific cell types.

Redox-Responsive Resilin-Like Hydrogels for Tissue Engineering and Drug Delivery Applications

Resilin, a protein found in insect cuticles, is renowned for its outstanding elastomeric properties. The authors' laboratory previously developed a recombinant protein, which consisted of consensus resilin-like repeats from Anopheles gambiae, and demonstrated its potential in cartilage and vascular engineering. To broaden the versatility of the resilin-like protein, this study utilizes a cleavable crosslinker, which contains a disulfide bond, to develop smart resilin-like hydrogels that are redox-responsive. The hydrogels exhibit a porous structure and a stable storage modulus (G') of ≈3 kPa. NIH/3T3 fibroblasts cultured on hydrogels for 24 h have a high viability (>95%). In addition, the redox-responsive hydrogels show significant degradation in a reducing environment (10 mm glutathione (GSH)). The release profiles of fluorescently labeled dextrans encapsulated within the hydrogels are assessed in vitro. For dextran that is estimated to be larger than the mesh size of the gel, faster release is observed in the presence of reducing agents due to degradation of the hydrogel networks. These studies thus demonstrate the potential of using these smart hydrogels in a variety of applications ranging from scaffolds for tissue engineering to drug delivery systems that target the intracellular reductive environments of tumors.

Protein-Engineered Functional Materials

Proteins are versatile macromolecules that can perform a variety of functions. In the past three decades, they have been commonly used as building blocks to generate a range of biomaterials. Owing to their flexibility, proteins can either be used alone or in combination with other functional molecules. Advances in synthetic and chemical biology have enabled new protein fusions as well as the integration of new functional groups leading to biomaterials with emergent properties. This review discusses protein-engineered materials from the perspectives of domain-based designs as well as physical and chemical approaches for crosslinked materials, with special emphasis on the creation of hydrogels. Engineered proteins that organize or template metal ions, bear noncanonical amino acids (NCAAs), and their potential applications, are also reviewed.

Methods for producing microstructured hydrogels for targeted applications in biology

Hydrogels have been broadly studied for applications in clinically motivated fields such as tissue regeneration, drug delivery, and wound healing, as well as in a wide variety of consumer and industry uses. While the control of mechanical properties and network structures are important in all of these applications, for regenerative medicine applications in particular, matching the chemical, topographical and mechanical properties for the target use/tissue is critical. There have been multiple alternatives developed for fabricating materials with microstructures with goals of controlling the spatial location, phenotypic evolution, and signaling of cells. The commonly employed polymers such as poly(ethylene glycol) (PEG), polypeptides, and polysaccharides (as well as others) can be processed by various methods in order to control material heterogeneity and microscale structures. We review here the more commonly used polymers, chemistries, and methods for generating microstructures in biomaterials, highlighting the range of possible morphologies that can be produced, and the limitations of each method. With a focus in liquid-liquid phase separation, methods and chemistries well suited for stabilizing the interface and arresting the phase separation are covered. As the microstructures can affect cell behavior, examples of such effects are reviewed as well. STATEMENT OF SIGNIFICANCE: Heterogeneous hydrogels with enhanced matrix complexity have been studied for a variety of biomimetic materials. A range of materials based on poly(ethylene glycol), polypeptides, proteins, and/or polysaccharides, have been employed in the studies of materials that by virtue of their microstructure, can control the behaviors of cells. Methods including microfluidics, photolithography, gelation in the presence of porogens, and liquid-liquid phase separation, are presented as possible strategies for producing materials, and their relative advantages and disadvantages are discussed. We also describe in more detail the various processes involved in LLPS, and how they can be manipulated to alter the kinetics of phase separation and to yield different microstructured materials.

Active Targeting of Cancer Cells by Nanobody Decorated Polypeptide Micelle with Bio-orthogonally Conjugated Drug

Polypeptides are promising carriers for chemotherapeutics: they have minimal toxicity, can be recombinantly synthesized with precise control over molecular weight, and enhance drug pharmacokinetics as self-assembled nanoparticles. Polypeptide-based systems also provide the ability to achieve active targeting with genetically encoded targeting ligands. While passive targeting promotes accumulation of nanocarriers in solid tumors, active targeting provides an additional layer of tunable control and widens the therapeutic window. However, fusion of most targeting proteins to polypeptide carriers exposes the limitations of this approach: the residues that are used for drug attachment are also promiscuously distributed on protein surfaces. We present here a universal methodology to solve this problem by the site-specific attachment of extrinsic moieties to polypeptide drug delivery systems without cross-reactivity to fused targeting domains. We incorporate an unnatural amino acid, p-acetylphenylalanine, to provide a biorthogonal ketone for attachment of doxorubicin in the presence of reactive amino acids in a nanobody-targeted, elastin-like polypeptide nanoparticle. These nanoparticles exhibit significantly greater cytotoxicity than nontargeted controls in multiple cancer cell lines.

Rapid and simple purification of elastin-like polypeptides directly from whole cells and cell lysates by organic solvent extraction

Elastin-like polypeptides (ELP) are a well-known class of proteins that are being increasingly utilized in a variety of biomedical applications, due to their beneficial physicochemical properties. A unifying feature of ELP is their demonstration of a sequence tunable inverse transition temperature (Tt) that enables purification using a simple, straightforward process called inverse transition cycling (ITC). Despite the utility of ITC, the process is inherently limited to ELP with an experimentally accessible Tt. Since the underlying basis for the ELP Tt is related to its high overall hydrophobicity, we anticipated that ELP would be excellent candidates for purification by organic extraction. We report the first method for rapidly purifying ELP directly from whole E. coli cells or clarified lysates using pure organic solvents and solvent mixtures, followed by aqueous back extraction. Our results show that small ELP and a large ELP-fusion protein can be isolated in high yield from whole cells or cell lysates with greater than 95% purity in less than 30 min and with very low levels of LPS and DNA contamination.

Biocompatibility of injectable resilin-based hydrogels

Vocal folds are connective tissues housed in the larynx, which can be subjected to various injuries and traumatic stimuli that lead to aberrant tissue structural alterations and fibrotic-induced biomechanical stiffening observed in patients with voice disorders. Much effort has been devoted to generate soft biomaterials that are injectable directly to sites of injury. To date, materials applied toward these applications have been largely focused on natural extracellular matrix-derived materials such as collagen, fibrin or hyaluronic acid; these approaches have suffered from the fact that materials are not sufficiently robust mechanically nor offer sufficient flexibility to modulate material properties for targeted injection. We have recently developed multiple resilin-inspired elastomeric hydrogels that possess similar mechanical properties as those reported for vocal fold tissues, and that also show promising in vitro cytocompatibility and in vivo biocompatibility. Here we report studies that test the delivery of resilin-based hydrogels through injection to the subcutaneous tissue in a wild-type mice model; histological and genetic expression outcomes were monitored. The rapid kinetics of crosslinking enabled facile injection and ensured the rapid transition of the viscous resilin precursor solution to a solid-like hydrogel in the subcutaneous space in vivo; the materials exhibited storage shear moduli in the range of 1000-2000 Pa when characterized through oscillatory rheology. Histological staining and gene expression profiles suggested minimal inflammatory profiles three weeks after injection, thereby demonstrating the potential suitability for site-specific in vivo injection of these elastomeric materials. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2229-2242, 2018.

Tunable Control of Hydrogel Microstructure by Kinetic Competition between Self-Assembly and Crosslinking of Elastin-like Proteins

The fabrication of three dimensional "bead-string" microstructured hydrogels is rationally achieved by controlling the relative timing of chemical crosslinking and physical self-assembly processes of an engineered protein. To demonstrate this strategy, an elastin-like protein (ELP) amino acid sequence was selected to enable site-specific chemical crosslinking and thermoresponsive physical self-assembly. This method allows the tuning of material microstructures without altering the ELP amino acid sequence but simply through controlling the chemical crosslinking extent before the thermally induced, physical coacervation of ELP. A loosely crosslinked network enables ELP to have greater chain mobility, resulting in phase segregation into larger beads. By contrast, a network with higher crosslinking density has restricted ELP chain mobility, resulting in more localized self-assembly into smaller beads. As a proof of concept application for this facile assembly process, we demonstrate one-pot, simultaneous, dual encapsulation of hydrophilic and hydrophobic model drugs within the microstructured hydrogel and differential release rates of the two drugs from the material.

Bioactive scaffolds based on elastin-like materials for wound healing

Wound healing is a complex process that, in healthy tissues, starts immediately after the injury. Even though it is a natural well-orchestrated process, large trauma wounds, or injuries caused by acids or other chemicals, usually produce a non-elastic deformed tissue that not only have biological reduced properties but a clear aesthetic effect. One of the main drawbacks of the scaffolds used for wound dressing is the lack of elasticity, driving to non-elastic and contracted tissues. In the last decades, elastin based materials have gained in importance as biomaterials for tissue engineering applications due to their good cyto- and bio-compatibility, their ease handling and design, production and modification. Synthetic elastin or elastin like-peptides (ELPs) are the two main families of biomaterials that try to mimic the outstanding properties of natural elastin, elasticity amongst others; although there are no in vivo studies that clearly support that these two families of elastin based materials improve the elasticity of the artificial scaffolds and of the regenerated skin. Within the next pages a review of the different forms (coacervates, fibres, hydrogels and biofunctionalized surfaces) in which these two families of biomaterials can be processed to be applied in the wound healing field have been done. Here, we explore the mechanical and biological properties of these scaffolds as well as the different in vivo approaches in which these scaffolds have been used.

Functional Modification of Silica through Enhanced Adsorption of Elastin-Like Polypeptide Block Copolymers

A powerful tool for controlling interfacial properties and molecular architecture relies on the tailored adsorption of stimuli-responsive block copolymers onto surfaces. Here, we use computational and experimental approaches to investigate the adsorption behavior of thermally responsive polypeptide block copolymers (elastin-like polypeptides, ELPs) onto silica surfaces, and to explore the effects of surface affinity and micellization on the adsorption kinetics and the resultant polypeptide layers. We demonstrate that genetic incorporation of a silica-binding peptide (silaffin R5) results in enhanced adsorption of these block copolymers onto silica surfaces as measured by quartz crystal microbalance and ellipsometry. We find that the silaffin peptide can also direct micelle adsorption, leading to close-packed micellar arrangements that are distinct from the sparse, patchy arrangements observed for ELP micelles lacking a silaffin tag, as evidenced by atomic force microscopy measurements. These experimental findings are consistent with results of dissipative particle dynamics simulations. Wettability measurements suggest that surface immobilization hampers the temperature-dependent conformational change of ELP micelles, while adsorbed ELP unimers (i.e., unmicellized block copolymers) retain their thermally responsive property at interfaces. These observations provide guidance on the use of ELP block copolymers as building blocks for fabricating smart surfaces and interfaces with programmable architecture and functionality.

Photo-Crosslinkable Unnatural Amino Acids Enable Facile Synthesis of Thermoresponsive Nano- to Microgels of Intrinsically Disordered Polypeptides

Hydrogel particles are versatile materials that provide exquisite, tunable control over the sequestration and delivery of materials in pharmaceutics, tissue engineering, and photonics. The favorable properties of hydrogel particles depend largely on their size, and particles ranging from nanometers to micrometers are used in different applications. Previous studies have only successfully fabricated these particles in one specific size regime and required a variety of materials and fabrication methods. A simple yet powerful system is developed to easily tune the size of polypeptide-based, thermoresponsive hydrogel particles, from the nano- to microscale, using a single starting material. Particle size is controlled by the self-assembly and unique phase transition behavior of elastin-like polypeptides in bulk and within microfluidic-generated droplets. These particles are then stabilized through ultraviolet irradiation of a photo-crosslinkable unnatural amino acid (UAA) cotranslationally incorporated into the parent polypeptide. The thermoresponsive property of these particles provides an active mechanism for actuation and a dynamic responsive to the environment. This work represents a fundamental advance in the generation of crosslinked biomaterials, especially in the form of soft matter colloids, and is one of the first demonstrations of successful use of UAAs in generating a novel material.

Development and Evaluation of a Water-Based Flame Retardant Spray Coating for Cotton Fabrics

In this Research Article, we report on the development of water-based flame retardant coating based on phospho-nitrogen combination for cotton fabrics. A one-step spray-on process was employed to coat the fabrics by taking advantage of the spontaneous reaction between para-phenylenediamine (PDA) and tetrakis(hydroxymethyl)phosphonium chloride (THPC) resulting in an instantaneous precipitation of poly[1,4-diaminophenylene-tris(dimethyl hydroxymethyl)phosphine] (PApP) on the fabric surface. The effectiveness of PApP in improving the flame retardant properties like ignition resistance and lateral flame spread were evaluated in accordance with ASTM D6413 and BS EN ISO 15025 flammability tests. Despite the early (thermal) decomposition onset for coated fabrics under both oxidative and pyrolytic conditions, remarkably, self-extinguishing behavior (<3 s) without any lateral flame spread was observed. Possible reaction scheme was also proposed to correlate flame retardant mechanism of the coated fabrics with the observations. Additional analysis via pyrolysis combustion flow calorimetry and vertical flame testing before and after washing showed that flame retardant efficiency did decrease with washing, but the overall performance was still promising.

Covalently adaptable elastin-like protein - hyaluronic acid (ELP - HA) hybrid hydrogels with secondary thermoresponsive crosslinking for injectable stem cell delivery

Shear-thinning, self-healing hydrogels are promising vehicles for therapeutic cargo delivery due to their ability to be injected using minimally invasive surgical procedures. We present an injectable hydrogel using a novel combination of dynamic covalent crosslinking with thermoresponsive engineered proteins. Ex situ at room temperature, rapid gelation occurs through dynamic covalent hydrazone bonds by simply mixing two components: hydrazine-modified elastin-like protein (ELP) and aldehyde-modified hyaluronic acid. This hydrogel provides significant mechanical protection to encapsulated human mesenchymal stem cells during syringe needle injection and rapidly recovers after injection to retain the cells homogeneously within a 3D environment. In situ, the ELP undergoes a thermal phase transition, as confirmed by Coherent anti-Stokes Raman scattering microscopy observation of dense ELP thermal aggregates. The formation of the secondary network reinforces the hydrogel and results in a 10-fold slower erosion rate compared to a control hydrogel without secondary thermal crosslinking. This improved structural integrity enables cell culture for three weeks post injection, and encapsulated cells maintain their ability to differentiate into multiple lineages, including chondrogenic, adipogenic, and osteogenic cell types. Together, these data demonstrate the promising potential of ELP-HA hydrogels for injectable stem cell transplantation and tissue regeneration.