Acetic-Acid-Mediated Miscibility toward Electrospinning Homogeneous Composite Nanofibers of GT/PCL

Fabrication of Bioresorbable Barrier Membranes from Gelatin/Poly(4-Hydroxybutyrate) (P4HB)

Dental implant surgery is a procedure that replaces damaged or missing teeth with an artificial implant. During this procedure, guided bone regeneration (GBR) membranes are commonly used to inhibit the migration of epithelium and GBR at the surgical sites. Due to its biodegradability, good biocompatibility, and unique biological properties, gelatin (GT) is considered a suitable candidate for guiding periodontal tissue regeneration. However, GT-based membranes come with limitations, such as poor mechanical strength and mismatched degradation rates. To confront this challenge, a series of GT/poly(4-hydroxybutyrate) (P4HB) composite membranes are fabricated through electrospinning technology. The morphology, composition, wetting properties, mechanical properties, biocompatibility, and in vivo biodegradability of the as-prepared composite membranes are carefully characterized. The results demonstrate that all the membranes present excellent biocompatibility. Moreover, the in vivo degradation rate of the membranes can be manipulated by changing the ratio of GT and P4HB. The results indicate that the optimized GT/P4HB membranes with a high P4HB content (75%) may be suitable for periodontal tissue engineering because of their good mechanical properties and biodegradation rate compatible with tissue growth.

Preparing gelatin-containing polycaprolactone / polylactic acid nanofibrous membranes for periodontal tissue regeneration using side-by-side electrospinning technology

Electrospinning technology has recently attracted increased attention in the biomedical field, and preparing various cellulose nanofibril membranes for periodontal tissue regeneration has unique advantages. However, the characteristics of using a single material tend to make it challenging to satisfy the requirements for a periodontal barrier film, and the production of composite fibrous membranes frequently impacts the quality of the final fiber membrane due to the influence of miscibility between different materials. In this study, nanofibrous membranes composed of polylactic acid (PLA) and polycaprolactone (PCL) fibers were fabricated using side-by-side electrospinning. Different concentrations of gelatin were added to the fiber membranes to improve their hydrophilic properties. The morphological structure of the different films as well as their composition, wettability and mechanical characteristics were examined. The results show that PCL/PLA dual-fibrous composite membranes with an appropriate amount of gelatin ensures sufficient mechanical strength while obtaining improved hydrophilic properties. The viability of L929 fibroblasts was evaluated using CCK-8 assays, and cell adhesion on the scaffolds was confirmed by scanning electron microscopy and by immunofluorescence assays. The results demonstrated that none of the fibrous membranes were toxic to cells and the addition of gelatin improved cell adhesion to those membranes. Based on our findings, adding 30% gelatin to the membrane may be the most appropriate content for periodontal tissue regeneration, considering the scaffold's mechanical qualities, hydrophilic properties and biocompatibility. In addition, the PCL-gelatin/PLA-gelatin dual-fibrous membranes prepared using side-by-side electrospinning technology have potential applications for tissue engineering.

Electrospun medicated gelatin/polycaprolactone Janus fibers for photothermal-chem combined therapy of liver cancer

Liver cancer is a common cancer in the world, and core-shell nanoparticles as a commonly used combination therapy for local tumor ablation, have many shortcomings. In this study, photothermal Janus nanofibers were prepared using a electrospinning technology for tumor treatment, and the products were characterized and in vitro photothermal performance investigated. The micromorphology analysis showed that the photothermic agent CuS and electrospun fibers (loaded with CuS and anticancer drug dihydromyricetin) were successfully prepared, with diameters of 11.58 ± 0.27 μm and 1.19 ± 0.01 μm, respectively. Water contact angle and tensile test indicated that the fiber membranes has a certain hydrophilic adhesion and excellent mechanical strength. The fiber membranes has 808 nm near-infrared laser photothermal heating performance and photothermal stability, and it also has a strong response to the laser that penetrates biological tissue. In addition, in vitro cell culture and in vivo implantation study showed that the fiber membranes could kill HepG2 hepatocellular carcinoma cells combined with photothermal-chem and could be enriched in the implantation area, respectively. Hence, the Janus membranes may be a potential cancer treatment material.

Pro-vasculogenic Fibers by PDA-Mediated Surface Functionalization Using Cell-Free Fat Extract (CEFFE)

Formation of adequate vascular network within engineered three-dimensional (3D) tissue substitutes postimplantation remains a major challenge for the success of biomaterials-based tissue regeneration. To better mimic the in vivo angiogenic and vasculogenic processes, nowadays increasing attention is given to the strategy of functionalizing biomaterial scaffolds with multiple bioactive agents. Aimed at engineering electrospun biomimicking fibers with pro-vasculogenic capability, this study was proposed to functionalize electrospun fibers of polycaprolactone/gelatin (PCL/GT) by cell-free fat extract (CEFFE or FE), a newly emerging natural "cocktail" of cytokines and growth factors extracted from human adipose tissue. This was achieved by having the electrospun PCL/GT fiber surface coated with polydopamine (PDA) followed by PDA-mediated immobilization of FE to generate the pro-vasculogenic fibers of FE-PDA@PCL/GT. It was found that the PDA-coated fibrous mat of PCL/GT exhibited a high FE-loading efficiency (∼90%) and enabled the FE to be released in a highly sustained manner. The engineered FE-PDA@PCL/GT fibers possess improved cytocompatibility, as evidenced by the enhanced cellular proliferation, migration, and RNA and protein expressions (e.g., CD31, vWF, VE-cadherin) in the human umbilical vein endothelial cells (huvECs) used. Most importantly, the FE-PDA@PCL/GT fibrous scaffolds were found to enormously stimulate tube formation in vitro, microvascular development in the in ovo chick chorioallantoic membrane (CAM) assay, and vascularization of 3D construct in a rat subcutaneous embedding model. This study highlights the potential of currently engineered pro-vasculogenic fibers as a versatile platform for engineering vascularized biomaterial constructs for functional tissue regeneration.

Fiber configuration determines foreign body response of electrospun scaffolds:in vitroandin vivoassessments

Biomaterial scaffolds boost tissue repair and regeneration by providing physical support, delivering biological signals and/or cells, and recruiting endogenous cells to facilitate tissue-material integration and remodeling. Foreign body response (FBR), an innate immune response that occurs immediately after biomaterial implantation, is a critical factor in determining the biological outcomes of biomaterial scaffolds. Electrospinning is of great simplicity and cost-effectiveness to produce nanofiber scaffolds with well-defined physicochemical properties and has been used in a variety of regenerative medicine applications in preclinical trials and clinical practice. A deep understanding of causal factors between material properties and FBR of host tissues is beneficial to the optimal design of electrospun scaffolds with favorable immunomodulatory properties. We herein prepared and characterized three electrospun scaffolds with distinct fiber configurations and investigated their effects on FBR in terms of immune cell-material interactions and host responses. Our results show that electrospun yarn scaffold results in greater cellular immune reactions and elevated FBR inin vivoassessments. Although the yarn scaffold showed aligned fiber bundles, it failed to induce cell elongation of macrophages due to its rough surface and porous grooves between yarns. In contrast, the aligned scaffold showed reduced FBR compared to the yarn scaffold, indicating a smooth surface is also a contributor to the immunomodulatory effects of the aligned scaffold. Our study suggests that balanced porousness and smooth surface of aligned fibers or yarns should be the key design parameters of electrospun scaffolds to modulate host responsein vivo.

Guided Tissue and Bone Regeneration Membranes: A Review of Biomaterials and Techniques for Periodontal Treatments

This comprehensive review provides an in-depth analysis of the use of biomaterials in the processes of guided tissue and bone regeneration, and their indispensable role in dental therapeutic interventions. These interventions serve the critical function of restoring both structural integrity and functionality to the dentition that has been lost or damaged. The basis for this review is laid through the exploration of various relevant scientific databases such as Scopus, PubMed, Web of science and MEDLINE. From a meticulous selection, relevant literature was chosen. This review commences by examining the different types of membranes used in guided bone regeneration procedures and the spectrum of biomaterials employed in these operations. It then explores the manufacturing technologies for the scaffold, delving into their significant impact on tissue and bone regenerations. At the core of this review is the method of guided bone regeneration, which is a crucial technique for counteracting bone loss induced by tooth extraction or periodontal disease. The discussion advances by underscoring the latest innovations and strategies in the field of tissue regeneration. One key observation is the critical role that membranes play in guided reconstruction; they serve as a barrier, preventing the entry of non-ossifying cells, thereby promoting the successful growth and regeneration of bone and tissue. By reviewing the existing literature on biomaterials, membranes, and scaffold manufacturing technologies, this paper illustrates the vast potential for innovation and growth within the field of dental therapeutic interventions, particularly in guided tissue and bone regeneration.

Recent Tissue Engineering Approaches to Mimicking the Extracellular Matrix Structure for Skin Regeneration

Inducing tissue regeneration in many skin defects, such as large traumatic wounds, burns, other physicochemical wounds, bedsores, and chronic diabetic ulcers, has become an important clinical issue in recent years. Cultured cell sheets and scaffolds containing growth factors are already in use but have yet to restore normal skin tissue structure and function. Many tissue engineering materials that focus on the regeneration process of living tissues have been developed for the more versatile and rapid initiation of treatment. Since the discovery that cells recognize the chemical-physical properties of their surrounding environment, there has been a great deal of work on mimicking the composition of the extracellular matrix (ECM) and its three-dimensional network structure. Approaches have used ECM constituent proteins as well as morphological processing methods, such as fiber sheets, sponges, and meshes. This review summarizes material design strategies in tissue engineering fields, ranging from the morphology of existing dressings and ECM structures to cellular-level microstructure mimicry, and explores directions for future approaches to precision skin tissue regeneration.

Mechanisms of magnesium oxide-incorporated electrospun membrane modulating inflammation and accelerating wound healing

Previously, we demonstrated that magnesium oxide (MgO)-incorporated electrospun membranes show powerful antibacterial activity and promote wound healing, but the underlying mechanisms have not been entirely understood. Herein, we investigated the relationship between structure and function of MgO-incorporated membranes and interrogated critical bioactive cues that contribute to accelerated wound healing and functional restoration. Our results show that MgO-incorporated membranes exhibit good flexibility and improved water vapor transmission rates (WVTRs) and sustained Mg²⁺ release in a simulated model of wounds. MgO-incorporated membranes modulate macrophage phenotype to downregulate inflammatory response, contributing to alleviated inflammation and creating a favorable microenvironment for wound healing. Specifically, MgO-incorporated membranes stimulate macrophages to shift to a pro-healing M2 phenotype and upregulate pro-healing cytokine of transforming growth factor-beta 1 (TGF-β1) and downregulate pro-inflammatory cytokines under lipopolysaccharide (LPS) challenge conditions. Together with increased TGF-β1 by macrophages, MgO-incorporated membranes significantly boost the proliferation of fibroblasts and upregulate collagen production, thus driving granulation tissue formation and wound closure. MgO-incorporated membranes promote angiogenesis by promoting tube formation and upregulating vascular endothelial growth factor (VEGF) production of endothelial cells. Rapid epithelialization of regenerated skin tissue is attributed to the balanced phenotype of keratinocytes between proliferative and terminally differentiated populations. In addition to coordinating keratinocyte phenotype, MgO-incorporated membranes reduce the expression of inflammatory cytokine interleukin 1-alpha (IL-1α) therefore promoting hair follicle regeneration. These data provide mechanisms of MgO-incorporated membranes that inhibit bacterial infection, alleviate inflammation, facilitate extracellular matrix production and epithelialization, and potentiate hair follicle regeneration.

3D printing of cellulose nanocrystals based composites to build robust biomimetic scaffolds for bone tissue engineering

Cellulose nanocrystals (CNC) are drawing increasing attention in the fields of biomedicine and healthcare owing to their durability, biocompatibility, biodegradability and excellent mechanical properties. Herein, we fabricated using fused deposition modelling technology 3D composite scaffolds from polylactic acid (PLA) and CNC extracted from Ficus thonningii. Scanning electron microscopy revealed that the printed scaffolds exhibit interconnected pores with an estimated average pore size of approximately 400 µm. Incorporating 3% (w/w) of CNC into the composite improved PLA mechanical properties (Young's modulus increased by ~ 30%) and wettability (water contact angle decreased by ~ 17%). The mineralization process of printed scaffolds using simulated body fluid was validated and nucleation of hydroxyapatite confirmed. Additionally, cytocompatibility tests revealed that PLA and CNC-based PLA scaffolds are non-toxic and compatible with bone cells. Our design, based on rapid 3D printing of PLA/CNC composites, combines the ability to control the architecture and provide improved mechanical and biological properties of the scaffolds, which opens perspectives for applications in bone tissue engineering and in regenerative medicine.

Chain-End Functionalization of Poly(ε-caprolactone) for Chemical Binding with Gelatin: Binary Electrospun Scaffolds with Improved Physico-Mechanical Characteristics and Cell Adhesive Properties

Composite biocompatible scaffolds, obtained using the electrospinning (ES) technique, are highly promising for biomedical application thanks to their high surface area, porosity, adjustable fiber diameter, and permeability. However, the combination of synthetic biodegradable (such as poly(ε-caprolactone) PCL) and natural (such as gelatin Gt) polymers is complicated by the problem of low compatibility of the components. Previously, this problem was solved by PCL grafting and/or Gt cross-linking after ES molding. In the present study, composite fibrous scaffolds consisting of PCL and Gt were fabricated by the electrospinning (ES) method using non-functionalized PCL1 or NHS-functionalized PCL2 and hexafluoroisopropanol as a solvent. To provide covalent binding between PCL2 and Gt macromolecules, NHS-functionalized methyl glutarate was synthesized and studied in model reactions with components of spinning solution. It was found that selective formation of amide bonds, which provide complete covalent bonding of Gt in PCL/Gt composite, requires the presence of weak acid. With the use of the optimized ES method, fibrous mats with different PCL/Gt ratios were prepared. The sample morphology (SEM), hydrolytic resistance (FT-IR), cell adhesion and viability (MTT assay), cell penetration (fluorescent microscopy), and mechanical characteristics of the samples were studied. PCL2-based films with a Gt content of 20 wt% have demonstrated the best set of properties.

Antimicrobial Nitric Oxide-Releasing Electrospun Dressings for Wound Healing Applications

Nonhealing and chronic wounds represent a major problem for the quality of life of patients and have cost implications for healthcare systems. The pathophysiological mechanisms that prevent wound healing are usually multifactorial and relate to patient overall health and nutrition, vascularity of the wound bed, and coexisting infection/colonization. Bacterial infections are one of the predominant issues that can stall a wound, causing it to become chronic. Successful wound healing often depends on weeks or months of antimicrobial therapy, but this is problematic given the rise in multidrug-resistant bacteria. As such, alternatives to antibiotics are desperately needed to aid the healing of chronic, and even acutely infected wounds. Nitric oxide (NO) kills bacteria through a variety of mechanisms, and thus, bacteria have shown no tendency to develop resistance to NO as a therapeutic agent and therefore can be a good alternative to antibiotic therapy. In this paper, we report on the development of NO-releasing electrospun membranes fabricated from polycaprolactone (PCL)/gelatin blends and optimized to reduce bacterial infection. The NO payload in the membranes was directly related to the number of amines (and hence the amount of gelatin) in the blend. Higher NO payloads corresponded with a higher degree of antimicrobial efficacy. No cytotoxicity was observed for electrospun membranes, and an in vitro wound closure assay demonstrated closure within 16 h. The results presented here clearly indicate that these NO-releasing electrospun membranes hold significant promise as wound dressings due to their antimicrobial activity and biocompatibility.

Nature-Derived and Synthetic Additives to poly(ɛ-Caprolactone) Nanofibrous Systems for Biomedicine; an Updated Overview

As a low cost, biocompatible, and bioresorbable synthetic polymer, poly (ɛ-caprolactone) (PCL) is widely used for different biomedical applications including drug delivery, wound dressing, and tissue engineering. An extensive range of in vitro and in vivo tests has proven the favourable applicability of PCL in biomedicine, bringing about the FDA approval for a plethora of PCL made medical or drug delivery systems. This popular polymer, widely researched since the 1970s, can be readily processed through various techniques such as 3D printing and electrospinning to create biomimetic and customized medical products. However, low mechanical strength, insufficient number of cellular recognition sites, poor bioactivity, and hydrophobicity are main shortcomings of PCL limiting its broader use for biomedical applications. To maintain and benefit from the high potential of PCL, yet addressing its physicochemical and biological challenges, blending with nature-derived (bio)polymers and incorporation of nanofillers have been extensively investigated. Here, we discuss novel additives that have been meant for enhancement of PCL nanofiber properties and thus for further extension of the PCL nanofiber application domain. The most recent researches (since 2017) have been covered and an updated overview about hybrid PCL nanofibers is presented with focus on those including nature-derived additives, e.g., polysaccharides and proteins, and synthetic additives, e.g., inorganic and carbon nanomaterials.

Regeneration of Subcutaneous Cartilage in a Swine Model Using Autologous Auricular Chondrocytes and Electrospun Nanofiber Membranes Under Conditions of Varying Gelatin/PCL Ratios

The scarcity of ideal biocompatible scaffolds makes the regeneration of cartilage in the subcutaneous environment of large animals difficult. We have previously reported the successful regeneration of good-quality cartilage in a nude mouse model using the electrospun gelatin/polycaprolactone (GT/PCL) nanofiber membranes. The GT/PCL ratios were varied to generate different sets of membranes to conduct the experiments. However, it is unknown whether these GT/PCL membranes can support the process of cartilage regeneration in an immunocompetent large animal model. We seeded swine auricular chondrocytes onto different GT/PCL nanofiber membranes (GT:PCL = 30:70, 50:50, and 70:30) under the sandwich cell-seeding mode. Prior to subcutaneously implanting the samples into an autologous host, they were cultured in vitro over a period of 2 weeks. The results revealed that the nanofiber membranes with different GT/PCL ratios could support the process of subcutaneous cartilage regeneration in an autologous swine model. The maximum extent of homogeneity in the cartilage tissues was achieved when the G5P5 (GT: PC = 50: 50) group was used for the regeneration of cartilage. The formed homogeneous cartilage tissues were characterized by the maximum cartilage formation ratio. The extents of the ingrowth of the fibrous tissues realized and the extents of infiltration of inflammatory cells achieved were found to be the minimum in this case. Quantitative analyses were conducted to determine the wet weight, cartilage-specific extracellular matrix content, and Young’s modulus. The results indicated that the optimal extent of cartilage formation was observed in the G5P5 group. These results indicated that the GT/PCL nanofiber membranes could serve as a potential scaffold for supporting subcutaneous cartilage regeneration under clinical settings. An optimum GT/PCL ratio can promote cartilage formation.

Gelatin/Polycaprolactone Electrospun Nanofibrous Membranes: The Effect of Composition and Physicochemical Properties on Postoperative Cardiac Adhesion

Cardiovascular diseases have become a major threat to human health. The adhesion formation is an inevitable pathophysiological event after cardiac surgery. We have previously shown that gelatin/polycaprolactone (GT/PCL, mass ratio 50:50) electrospun nanofibrous membranes have high potential in preventing postoperative cardiac adhesion, but the effect of GT:PCL composition on anti-adhesion efficacy was not investigated. Herein, nanofibrous membranes with different GT:PCL mass ratios of 0:100, 30:70, 50:50, and 70:30 were prepared via electrospinning. The 70:30 membrane failed to prevent postoperative cardiac adhesion, overly high GT contents significantly deteriorated the mechanical properties, which complicated the suturing during surgery and hardly maintained the structural integrity after implantation. Unexpectedly, the 0:100 membrane (no gelatin contained) could not effectively prevent either, since its large pore size allowed the penetration of numerous inflammatory cells to elicit a severe inflammatory response. Only the GT:PCL 50:50 membrane exhibited excellent mechanical properties, good biocompatibility and effective anti-cell penetration ability, which could serve as a physical barrier to prevent postoperative cardiac adhesion and might be suitable for other biomedical applications such as wound healing, guided tissue or bone regeneration.

Bismuth subsalicylate incorporated in polycaprolactone-gelatin membranes by electrospinning to prevent bacterial colonization

Periodontitis is a chronic, multifactorial, inflammatory disease characterized by the progressive destruction of the periodontal tissues. Guided tissue regeneration (GTR), involving the use of barrier membranes, is one of the most successful clinical procedures for periodontal therapy. Nevertheless, rapid degradation of the membranes and membrane-related infections are considered two of the major reasons for GTR clinical failure. Recently, integration of non-antibiotic, antimicrobial materials to the membranes has emerged as a novel strategy to face the bacterial infection challenge, without increasing bacterial resistance. In this sense, bismuth subsalicylate (BSS) is a non-antibiotic, metal-based antimicrobial agent effective against different bacterial strains, that has been long safely used in medical treatments. Thus, the aim of the present work was to fabricate fibrillar, non-rapidly bioresorbable, antibacterial GTR membranes composed of polycaprolactone (PCL), gelatin (Gel), and BSS as the antibacterial agent. PCL-G-BSS membranes with three different BSS concentrations (2 wt./v%, 4 wt./v%, and 6 wt./v%) were developed by electrospinning and their morphology, composition, water wettability, mechanical properties, Bi release and degradation rate were characterized. The Cytotoxicity of the membranes was studiedin vitrousing human osteoblasts (hFOB) and gingival fibroblasts (HGF-1), and their antibacterial activity was tested againstAggregatibacter actinomycetemcomitans, Escherichia coli, Porphyromonas gingivalisandStaphylococcus aureus.The membranes obtained exhibited adequate mechanical properties for clinical application, and appropriate degradation rates for allowing periodontal defects regeneration. The hFOB and HGF-1 cells displayed adequate viability when in contact with the lixiviated products from the membranes, and, in general, displayed antibacterial activity against the four bacteria strains tested. Thus, the PCL-G-BSS membranes showed to be appropriate as potential barrier membranes for periodontal GTR treatments.

Magnesium oxide-incorporated electrospun membranes inhibit bacterial infections and promote the healing process of infected wounds

Bacterial infections cause severe secondary damage to wounds and hinder wound healing processes. We prepared magnesium oxide (MgO) nanoparticle-incorporated nanofibrous membranes by electrospinning and investigated their potential for wound dressing and fighting bacterial infection. MgO-Incorporated membranes possessed good elasticity and flexibility similar to native skin tissue and were hydrophilic, ensuring comfortable contact with wound beds. The cytocompatibility of membranes was dependent on the amounts of incorporated MgO nanoparticles: lower amounts promoted while higher amounts suppressed the proliferation of fibroblasts, endothelial cells, and macrophages. The antibacterial capacity of membranes was proportional to the amounts of incorporated MgO nanoparticles and they inhibited more than 98% E. coli, 90% S. aureus, and 94% S. epidermidis. MgO nanoparticle-incorporated membranes effectively suppressed bacterial infection and significantly promoted the healing processes of infected full-thickness wounds in a rat model. Subcutaneous implantation demonstrated that the incorporation of MgO nanoparticles into electrospun membranes elevated their bioactivity as evidenced by considerable cell infiltration into their dense nanofiber configuration and enhanced the remodeling of implanted membranes. This study highlights the potential of MgO-incorporated electrospun membranes in preventing bacterial infections of wounds.

Chondroitin Sulfate/Polycaprolactone/Gelatin Electrospun Nanofibers with Antithrombogenicity and Enhanced Endothelial Cell Affinity as a Potential Scaffold for Blood Vessel Tissue Engineering

Electrospun polymer nanofibers have gained much attention in blood vessel tissue engineering. However, conventional nanofiber materials with the deficiencies of slow endothelialization and thrombosis are not effective in promoting blood vessel tissue repair and regeneration. Herein, biomimetic gelatin (Gt)/polycaprolactone (PCL) composite nanofibers incorporating a different amount of chondroitin sulfate (CS) were developed via electrospinning technology to investigate their effects on antithrombogenicity and endothelial cell affinity. Varying CS concentrations in PG nanofibers affects fiber morphology and diameter. The CS/Gt/PCL nanofibers have suitable porosity (~ 80%) and PBS solution absorption (up to 650%). The introduction of CS in Gt/PCL nanofibers greatly enhances their anticoagulant properties, prolongs their coagulation time, and facilitates cell responses. Particularly, 10%CS/Gt/PCL nanofibers display favorable cell attachment, elongation, and proliferation. Thus, the Gt/PCL nanofibers containing a certain amount of CS could be excellent candidates as a promising tissue-engineering scaffold in blood vessel repair and regeneration.

Regeneration potential of decellularized periodontal ligament cell sheets combined with 15-deoxy-Δ12,14-prostaglandin J2 nanoparticles in a rat periodontal defect

Periodontitis is a chronic inflammatory disease characterized by loss of attachment and destruction of the periodontium. Decellularized sheet, as an advanced tissue regeneration engineering biomaterial, has been researched and applied in many fields, but its effects on periodontal regeneration remain unclear. In this study, the biological properties of decellularized human periodontal ligament cell (dHPDLC) sheets were evaluated in vitro. Polycaprolactone/gelatin (PCL/GE) nanofibers were fabricated as a carrier to enhance the mechanical strength of the dHPDLC sheet. 15-deoxy-[Formula: see text]-prostaglandin J₂ (15d-PGJ₂) nanoparticles were added for anti-inflammation and regeneration improvement. For in vivo analysis, dHPDLC sheets combined with 15d-PGJ₂ nanoparticles, with or without PCL/GE, were implanted into rat periodontal defects. The periodontal regeneration effects were identified by microcomputed tomography (micro-CT) and histological staining, and immunohistochemistry. The results revealed that DNA content was reduced by 96.6%. The hepatocyte growth factor, vascular endothelial growth factor, and basic fibroblast growth factor were preserved but reduced. The expressions or distribution of collagen I and fibronectin were similar in dHPDLC and nondecellularized cell sheets. The dHPDLC sheets maintained the intact structure of the extracellular matrix. It could be recellularized by allogeneic human periodontal stem ligament cells and retain osteoinductive potential. Newly formed bone, cementum, and PDL were observed in dHPDLC sheets combined with 15d-PGJ₂ groups, with or without PCL/GE nanofibers, for four weeks post-operation in vivo. Bringing together all these points, this new construct of dHPDLC sheets can be a potential candidate for periodontal regeneration in an inflammatory environment of the oral cavity.

In-vitro Characterization of a Hernia Mesh Featuring a Nanostructured Coating

Abdominal hernia repair is a frequently performed surgical procedure worldwide. Currently, the use of polypropylene (PP) surgical meshes for the repair of abdominal hernias constitutes the primary surgical approach, being widely accepted as superior to primary suture repair. Surgical meshes act as a reinforcement for the weakened or damaged tissues and support tissue restoration. However, implanted meshes could suffer from poor integration with the surrounding tissues. In this context, the present study describes the preliminary evaluation of a PCL-Gel-based nanofibrous coating as an element to develop a multicomponent hernia mesh device (meshPCL-Gel) that could overcome this limitation thanks to the presence of a nanostructured biomimetic substrate for enhanced cell attachment and new tissue formation. Through the electrospinning technique, a commercial PP hernia mesh was coated with a nanofibrous membrane from a polycaprolactone (PCL) and gelatin (Gel) blend (PCL-Gel). Resulting PCL-Gel nanofibers were homogeneous and defect-free, with an average diameter of 0.15 ± 0.04 μm. The presence of Gel decreased PCL hydrophobicity, so that membranes average water contact angle dropped from 138.9 ± 1.1° (PCL) to 99.9 ± 21.6°, while it slightly influenced mechanical properties, which remained comparable to those of PCL (E = 15.7 ± 2.7 MPa, σ R = 7.7 ± 0.6 ε R = 118.8 ± 13.2%). Hydrolytic and enzymatic degradation was conducted on PCL-Gel up to 28 days, with maximum weight losses around 20 and 40%, respectively. The meshPCL-Gel device was obtained with few simple steps, with no influences on the original mechanical properties of the bare mesh, and good stability under physiological conditions. The biocompatibility of meshPCL-Gel was assessed by culturing BJ human fibroblasts on the device, up to 7 days. After 24 h, cells adhered to the nanofibrous substrate, and after 72 h their metabolic activity was about 70% with respect to control cells. The absence of detectable lactate dehydrogenase in the culture medium indicated that no necrosis induction occurred. Hence, the developed nanostructured coating provided the meshPCL-Gel device with chemical and topographical cues similar to the native extracellular matrix ones, that could be exploited for enhancing the biological response and, consequently, mesh integration, in abdominal wall hernia repair.

Argon and Argon-Oxygen Plasma Surface Modification of Gelatin Nanofibers for Tissue Engineering Applications

In the present study, we developed a novel approach for functionalization of gelatin nanofibers using the plasma method for tissue engineering applications. For this purpose, tannic acid-crosslinked gelatin nanofibers were fabricated with electrospinning, followed by treatment with argon and argon–oxygen plasmas in a vacuum chamber. Samples were evaluated by using scanning electron microscopy (SEM), atomic force microscopy (AFM), attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, contact angle (CA) and X-ray diffraction (XRD). The biological activity of plasma treated gelatin nanofibers were further investigated by using fibroblasts as cell models. SEM studies showed that the average diameter and the surface morphology of nanofibers did not change after plasma treatment. However, the mean surface roughness (RMS) of samples were increased due to plasma activation. ATR-FTIR spectroscopy demonstrated several new bands on plasma treated fibers related to the plasma ionization of nanofibers. The CA test results stated that the surface of nanofibers became completely hydrophilic after argon–oxygen plasma treatment. Finally, increasing the polarity of crosslinked gelatin after plasma treatment resulted in an increase of the number of fibroblast cells. Overall, results expressed that our developed method could open new insights into the application of the plasma process for functionalization of biomedical scaffolds. Moreover, the cooperative interplay between gelatin biomaterials and argon/argon–oxygen plasmas discovered a key composition showing promising biocompatibility towards biological cells. Therefore, we strongly recommend plasma surface modification of nanofiber scaffolds as a pretreatment process for tissue engineering applications.

Dope-Dyeing of Polyvinyl Alcohol (PVA) Nanofibres with Remazol Yellow FG

The lack of aesthetic properties of electrospun nanofibres in terms of colour appearance is the drive in this preliminary study. This research is conducted to study the dyeing behaviour and colorimetric properties of electrospun nanofibres blended with Remazol Yellow FG reactive dye using dope-dyeing method via electrospinning process. This paper reports the colorimetric properties of dyed poly vinyl alcohol (PVA) nanofibres within the range of 2.5 wt.% to 12.5 wt.% dye content. The electrospinning parameters were fixed at the electrospinning distance of 10 cm, constant feed rate of 0.5 mL/h and applied voltage of 15 kV. The resulting impregnated dye of 10 wt.% exhibits acceptable colour difference of dyed PVA nanofibres, with a mean fibre diameter of 177.1 ± 11.5 nm. The SEM micrographs show the effect of dye content on morphology and fibre diameter upon the increment of dye used. Further increase of dye content adversely affects the jet stability during the electrospinning, resulting in macroscopic dropping phenomenon. The presence of all prominent peaks of Remazol dye in the PVA nanofibers was supported with FTIR analysis. The addition of dye into the nanofibres has resulted in the enhancement of thermal stability of the PVA as demonstrated by TGA analysis.

Electrospinning of bioactive polycaprolactone-gelatin nanofibres with increased pore size for cartilage tissue engineering applications

Polycaprolactone (PCL) electrospun scaffolds have been widely investigated for cartilage repair application. However, their hydrophobicity and small pore size has been known to prevent cell attachment, proliferation and migration. Here, PCL was blended with gelatin (GEL) combining the favorable biological properties of GEL with the good mechanical performance of the former. Also, polyethylene glycol (PEG) particles were introduced during the electrospinning of the polymers blend by simultaneous electrospraying. These particles were subsequently removed resulting in fibrous scaffolds with enlarged pore size. PCL, GEL and PEG scaffolds formulations were developed and extensively structural and biologically characterized. GEL incorporation on the PCL scaffolds led to a considerably improved cell attachment and proliferation. A substantial pore size and interconnectivity increase was obtained, allowing cell infiltration through the porogenic scaffolds. All together these results suggest that this combined approach may provide a potentially clinically viable strategy for cartilage regeneration.

Antibacterial composite membranes of polycaprolactone/gelatin loaded with zinc oxide nanoparticles for guided tissue regeneration

The bacterial colonization of absorbable membranes used for guided tissue regeneration (GTR), as well as their rapid degradation that can cause their rupture, are considered the major reasons for clinical failure. To address this, composite membranes of polycaprolactone (PCL) and gelatin (Gel) loaded with zinc oxide nanoparticles (ZnO-NPs; 1, 3 and 6 wt% relative to PCL content) were fabricated by electrospinning. To fabricate homogeneous fibrillar membranes, acetic acid was used as a sole common solvent to enhance the miscibility of PCL and Gel in the electrospinning solutions. The effects of ZnO-NPs in the physico-chemical, mechanical and in vitro biological properties of composite membranes were studied. The composite membranes showed adequate mechanical properties to offer a satisfactory clinical manipulation and an excellent conformability to the defect site while their degradation rate seemed to be appropriate to allow successful regeneration of periodontal defects. The presence of ZnO-NPs in the composite membranes significantly decreased the planktonic and the biofilm growth of the Staphylococcus aureus over time. Finally, the viability of human osteoblasts and human gingival fibroblasts exposed to the composite membranes with 1 and 3 wt% of ZnO-NPs indicated that those membranes are not expected to negatively influence the ability of periodontal cells to repopulate the defect site during GTR treatments. The results here obtained suggest that composite membranes of PCL and Gel loaded with ZnO-NPs have the potential to be used as structurally stable GTR membranes with local antibacterial properties intended for enhancing clinical treatments.

Single-step, acid-based fabrication of homogeneous gelatin-polycaprolactone fibrillar scaffolds intended for skin tissue engineering

Blends of natural and synthetic polymers have recently attracted great attention as scaffolds for tissue engineering applications due to their favorable biological and mechanical properties. Nevertheless, phase-separation of blend components is an important challenge facing the development of electrospun homogeneous fibrillar natural-synthetic polymers scaffolds; phase-separation can produce significant detrimental effects for scaffolds fabricated by electrospinning. In the present study, blends of gelatin (Gel; natural polymer) and polycaprolactone (PCL; synthetic polymer), containing 30 and 45 wt% Gel, were prepared using acetic acid as a 'green' sole solvent to straightforwardly produce appropriate single-step Gel-PCL solutions for electrospinning. Miscibility of Gel and PCL in the scaffolds was assessed and the morphology, chemical composition and structural and solid-state properties of the scaffolds were thoroughly investigated. Results showed that the two polymers proved miscible under the single-step solution process used and that the electrospun scaffolds presented suitable properties for potential skin tissue engineering applications. Viability, metabolic activity and protein expression of human fibroblasts cultured on the Gel-PCL scaffolds were evaluated using LIVE/DEAD (calcein/ethidium homodimer), MTT-Formazan and immunocytochemistry assays, respectively. In vitro results showed that the electrospun Gel-PCL scaffolds enhanced cell viability and proliferation in comparison to PCL scaffolds. Furthermore, scaffolds allowed fibroblasts expression of extracellular matrix proteins, tropoelastin and collagen Type I, in a similar way to positive controls. Results indicated the feasibility of the single-step solution process used herein to obtain homogeneous electrospun Gel-PCL scaffolds with Gel content ≥30 wt% and potential properties to be used as scaffolds for skin tissue engineering applications for wound healing.

Chitosan based bioactive materials in tissue engineering applications-A review

In recent years, there have been increasingly rapid advances of using bioactive materials in tissue engineering applications. Bioactive materials constitute many different structures based upon ceramic, metallic or polymeric materials, and can elicit specific tissue responses. However, most of them are relatively brittle, stiff, and difficult to form into complex shapes. Hence, there has been a growing demand for preparing materials with tailored physical, biological, and mechanical properties, as well as predictable degradation behavior. Chitosan-based materials have been shown to be ideal bioactive materials due to their outstanding properties such as formability into different structures, and fabricability with a wide range of bioactive materials, in addition to their biocompatibility and biodegradability. This review highlights scientific findings concerning the use of innovative chitosan-based bioactive materials in the fields of tissue engineering, with an outlook into their future applications. It also covers latest developments in terms of constituents, fabrication technologies, structural, and bioactive properties of these materials that may represent an effective solution for tissue engineering materials, making them a realistic clinical alternative in the near future.

A Novel Bilayer Wound Dressing Composed of a Dense Polyurethane/Propolis Membrane and a Biodegradable Polycaprolactone/Gelatin Nanofibrous Scaffold

One-layer wound dressings cannot meet all the clinical needs due to their individual characteristics and shortcomings. Therefore, bilayer wound dressings which are composed of two layers with different properties have gained lots of attention. In the present study, polycaprolactone/gelatin (PCL/Gel) scaffold was electrospun on a dense membrane composed of polyurethane and ethanolic extract of propolis (PU/EEP). The PU/EEP membrane was used as the top layer to protect the wound area from external contamination and dehydration, while the PCL/Gel scaffold was used as the sublayer to facilitate cells' adhesion and proliferation. The bilayer wound dressing was investigated regarding its microstructure, mechanical properties, surface wettability, anti-bacterial activity, biodegradability, biocompatibility, and its efficacy in the animal wound model and histopathological analyzes. Scanning electron micrographs exhibited uniform morphology and bead-free structure of the PCL/Gel scaffold with average fibers' diameter of 237.3 ± 65.1 nm. Significant anti-bacterial activity was observed against Staphylococcal aureus (5.4 ± 0.3 mm), Escherichia coli (1.9 ± 0.4 mm) and Staphylococcus epidermidis (1.0 ± 0.2 mm) according to inhibition zone test. The bilayer wound dressing exhibited high hydrophilicity (51.1 ± 4.9°), biodegradability, and biocompatibility. The bilayer wound dressing could significantly accelerate the wound closure and collagen deposition in the Wistar rats' skin wound model. Taking together, the PU/EEP-PCL/Gel bilayer wound dressing can be a potential candidate for biomedical applications due to remarkable mechanical properties, biocompatibility, antibacterial features, and wound healing activities.

Electrospun Functional Materials toward Food Packaging Applications: A Review

Electrospinning is an effective and versatile method to prepare continuous polymer nanofibers and nonwovens that exhibit excellent properties such as high molecular orientation, high porosity and large specific surface area. Benefitting from these outstanding and intriguing features, electrospun nanofibers have been employed as a promising candidate for the fabrication of food packaging materials. Actually, the electrospun nanofibers used in food packaging must possess biocompatibility and low toxicity. In addition, in order to maintain the quality of food and extend its shelf life, food packaging materials also need to have certain functionality. Herein, in this timely review, functional materials produced from electrospinning toward food packaging are highlighted. At first, various strategies for the preparation of polymer electrospun fiber are introduced, then the characteristics of different packaging films and their successful applications in food packaging are summarized, including degradable materials, superhydrophobic materials, edible materials, antibacterial materials and high barrier materials. Finally, the future perspective and key challenges of polymer electrospun nanofibers for food packaging are also discussed. Hopefully, this review would provide a fundamental insight into the development of electrospun functional materials with high performance for food packaging.

Characteristics and toxicity assessment of electrospun gelatin/PCL nanofibrous scaffold loaded with graphene in vitro and in vivo

Background: Electrospun gelatin/polycaprolactone (Gt/PCL) nanofibrous scaffolds loaded with graphene are novel nanomaterials with the uniquely strong property of electrical conductivity, which have been widely investigated for their potential applications in cardiovascular tissue engineering, including in bypass tracts for atrioventricular block.

Purpose: Electrospun Gt/PCL/graphene nanofibrous mats were successfully produced. Scanning electron micrography showed that the fibers with graphene were smooth and homogeneous. In vitro, to determine the biocompatibility of the scaffolds, hybrid scaffolds with different fractions of graphene were seeded with neonatal rat ventricular myocytes. In vivo, Gt/PCL scaffolds with different concentrations of graphene were implanted into rats for 4, 8 and 12 weeks.

Results: CCK-8 assays and histopathological staining (including DAPI, cTNT, and CX43) indicated that cells grew and survived well on the hybrid scaffolds if the mass fraction of graphene was lower than 0.5%. After implanting into rats for 4, 8 or 12 weeks, there was no gathering of inflammatory cells around the nanomaterials according to the HE staining results.

Conclusion: The results indicate that Gt/PCL nanofibrous scaffolds loaded with graphene have favorable electrical conductivity and biological properties and may be suitable scaffolds for use in the treatment of atrioventricular block. These findings alleviate safety concerns and provide novel insights into the potential applications of Gt/PCL loaded with graphene, offering a solid foundation for comprehensive in vivo studies.

Electrospun gelatin/PCL and collagen/PCL scaffolds for modulating responses of bone marrow endothelial progenitor cells

The determination of potential transplantable substrates and substitution cells for corneal endothelium transplantation may compensate for the shortage of cornea donors. Appropriate biodegradable and biocompatible tissue-engineered substratum with seed cells for endothelial keratoplasty has been increasingly studied. In the present study, electrospun gelatin/polycaprolactone (PCL) and collagen/PCL scaffolds were successfully established. Bone marrow endothelial progenitor cells (BEPCs) were cultured on these scaffolds to determine whether the scaffolds may promote the proliferation of BEPCs as well as maintain stem cell characteristics. Two variations of hybrid scaffolds, collagen/PCL (70% collagen and 30% PCL) and gelatin/PCL (70% gelatin and 30% PCL), were established via electrospinning. Microscopic structure, hydrophilicity and wettability of the two scaffolds were subsequently investigated. BEPCs were separately cultured on the scaffolds and were also seeded on glass slides to establish the control group. Furthermore, cell morphology; adherence, as determined by investigation of F-actin expression levels; proliferation, as determined via Cell Counting Kit-8 assays, Ki-67 staining and bromodeoxyuridine (BrdU) staining; and stem cell markers, as determined by cluster of differentiation (CD)-34 and CD-133 protein expression levels; were investigated. In addition, reverse transcription-quantitative polymerase chain reaction (RT-qPCR) was performed to determine gene expression. The two nanofiber scaffolds were established using electrospun techniques with expected hydrophilicity, wettability and biocompatibility. BEPCs were revealed to spread well on and strongly adhere to the collagen/PCL (70:30) and gelatin/PCL (70:30) scaffolds. Furthermore, Ki-67 and BrdU staining results revealed greater levels of positive dots on the two hybrid scaffolds compared with the control group. CD-34 and CD-133 protein staining demonstrated increased levels of fluorescence intensity on scaffolds compared with the control group. Furthermore, increased expression levels of differentiation markers, such as ATP binding cassette subfamily G member 2, leucine rich repeat containing G protein-coupled receptor 5 and CD166, were detected on both scaffolds. RT-qPCR results demonstrated that the expression of caspase-3, which is associated with apoptosis, was decreased on the two scaffolds compared with in the control group. The expression of inflammatory factors, including interleukin (IL)-1, exhibited a significant decrease on the gelatin/PCL scaffold compared with in the control group; whereas the difference between the expression level of IL-1 exhibited by the collagen/PCL group and the control group were not markedly different. Electrospun collagen/PCL and gelatin/PCL scaffolds exhibited the potential to enhance the adherence and proliferation of BEPCs. BEPCs cultured on the two scaffolds demonstrated increased stem cell characteristics and differentiation potential. Electrospun gelatin/PCL and collagen/PCL scaffolds may represent a promising substratum in tissue-engineered corneal endothelium.

Potential core-shell designed scaffolds with a gelatin-based shell in achieving controllable release rates of proteins for tissue engineering approaches

The biomaterials design as core-shell structures opens a new door to the release of susceptible biomolecules in a controllable manner and enables to place natural biomaterials as shell layers to impart the effective biofunctional features at surfaces. In this study, core-shell designed scaffolds were prepared using coaxial electrospinning with hybrid of gelatin (GT)/polycaprolactone (PCL) at different weight ratios as their shell and protein solution as their core, followed by cross-linking to impart controllable release rates, tunable mechanical properties, and enhanced cytocompatibility. SEM, FM, and TEM confirmed the successful production of uniform core-shell nanofibers and homogeneous protein distribution. Results showed that an increase in GT proportion in the shell resulted in a decrease in fiber diameter, an increase of Young's modulus, and an intense burst release of BSA 0.2% which could be controlled through cross-linking. The mechanical tests revealed that the GT/PCL combining and cross-linking improved mechanical properties which correlated with an increase in spreading and proliferation of HUVECs. A slight burst release was also detected from BSA 0.05% and EGF encapsulated GT73P-cross-linked scaffold which demonstrated their applicability for a controlled release of dilute proteins. We were able to successfully incorporate two types of protein with different concentrations without supporting polymer into the GT shell to provide scaffolds possessing tunable mechanical properties and controllable release rates through blending with PCL at different ratios and/or cross-linking. These findings are promising to promote delivery systems of angiogenic growth factors that are needed a sustained release with different rates at each angiogenesis stage. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019.

Bioresorbable electrospun gelatin/polycaprolactone nanofibrous membrane as a barrier to prevent cardiac postoperative adhesion

Post-cardiac surgical sternal and epicardial adhesions increase the risk and complexity of cardiac re-operative surgeries, which represent a significant challenge for patients with the congenital cardiac disease. Bioresorbable membranes can serve as barriers to prevent postoperative adhesions. Herein, we fabricated a bioresorbable gelatin/polycaprolactone (GT/PCL) composite membrane via electrospinning. The membrane was characterized in terms of morphology, mechanical properties, and biocompatibility. We then evaluated its efficacy as a physical barrier to prevent cardiac operative adhesions in a rabbit model. Our results showed that the membrane had a nanofibrous structure and was sturdy enough to be handled for the surgical procedures. In vitro studies with rabbit cardiac fibroblasts demonstrated that the membrane was biocompatible and inhibited cell infiltration. Further application of the membrane in a rabbit cardiac adhesion model revealed that the membrane was resorbed gradually and effectively resisted the sternal and epicardial adhesions. Interestingly, six months after the operation, the GT/PCL membrane was completely resorbed with simultaneous ingrowth of host cells to form a natural barrier. Collectively, these results indicated that the GT/PCL membrane might be a suitable barrier to prevent sternal and epicardial adhesions and might be utilized as a novel pericardial substitute for cardiac surgery. STATEMENT OF SIGNIFICANCE: Electrospinning is a versatile method to prepare nanofibrous membranes for tissue engineering and regenerative medicine applications. However, with the micro-/nano-scale structure and high porosity, the electrospun membrane might be an excellent candidate as a barrier to prevent postoperative adhesion. Here we prepared an electropun GT/PCL nanofibrous membrane and applied it as a barrier to prevent sternal and epicardial adhesions. Our results showed that the membrane had sufficient mechanical strength, good biocompatibility, and effectively resisted the sternal and epicardial adhesions. What's more, the membrane was bioresorbable and allowed simultaneous ingrowth of host cells to form a natural barrier. We believe that the current will inspire more research on nanomaterials to prevent postoperative adhesion applications.

Impact of setup orientation on blend electrospinning of poly-ε-caprolactone-gelatin scaffolds for vascular tissue engineering

Introduction:

This article explores the effect of horizontal and vertical setups on blend electrospinning with two polymers having vastly different properties – poly-ε-caprolactone and gelatin, and subsequent effect of the resulting microstructure on viability of seeded cells.

Methods:

Poly-ε-caprolactone and gelatin of varying blend concentrations were electrospun in horizontal and vertical setup orientations. NIH 3T3 fibroblasts were seeded on these scaffolds to assess cell viability changes in accordance with change in microstructure.

Results:

Blend electrospinning yielded a heterogeneous microstructure in the vertical orientation beyond a critical concentration of gelatin, and a homogeneous microstructure in the horizontal orientation. Unblended poly-ε-caprolactone electrospinning showed no significant difference in fibre diameter or pore size in either orientation. Mechanical testing showed reduced elasticity when poly-ε-caprolactone is blended with gelatin but an overall increase in tensile strength in the vertically spun samples. Cells on vertically spun samples showed significantly higher viabilities by day 7.

Discussion:

The composite microstructure obtained in vertically spun poly-ε-caprolactone -gelatin blends has a positive effect on viability of seeded cells. Such scaffolds can be considered suitable candidates for cardiovascular tissue engineering where cell infiltration is crucial.

Nanostructured Hydrogels by Blend Electrospinning of Polycaprolactone/Gelatin Nanofibers

Nanofibrous membranes based on polycaprolactone (PCL) have a large potential for use in biomedical applications but are limited by the hydrophobicity of PCL. Blend electrospinning of PCL with other biomedical suited materials, such as gelatin (Gt) allows for the design of better and new materials. This study investigates the possibility of blend electrospinning PCL/Gt nanofibrous membranes which can be used to design a range of novel materials better suited for biomedical applications. The electrospinnability and stability of PCL/Gt blend nanofibers from a non-toxic acid solvent system are investigated. The solvent system developed in this work allows good electrospinnable emulsions for the whole PCL/Gt composition range. Uniform bead-free nanofibers can easily be produced, and the resulting fiber diameter can be tuned by altering the total polymer concentration. Addition of small amounts of water stabilizes the electrospinning emulsions, allowing the electrospinning of large and homogeneous nanofibrous structures over a prolonged period. The resulting blend nanofibrous membranes are analyzed for their composition, morphology, and homogeneity. Cold-gelling experiments on these novel membranes show the possibility of obtaining water-stable PCL/Gt nanofibrous membranes, as well as nanostructured hydrogels reinforced with nanofibers. Both material classes provide a high potential for designing new material applications.

Icariin-loaded electrospun PCL/gelatin nanofiber membrane as potential artificial periosteum

Due to the significant role of the periosteum in bone regeneration, we hypothesised that using a specially engineered artificial periosteum could lead to an enhancement in osteogenesis in bone grafts. Herein, we describe our work aimed at fabricating an electrospun fibrous membrane as an artificial periosteum that exhibits flexibility, permeability and osteoinduction. This membrane was designed to cover the complex surface of bone grafts to facilitate and accelerate bone regeneration. The traditional Chinese medicine icariin (ICA) was subsequently introduced into poly (ε-caprolactone) (PCL) /gelatin nanofibers to fabricate an artificial periosteum for the first time. The effects of ICA content on morphology, physical properties, drug release profile, in vitro degradability, biocompatibility and osteogenic differentiation properties were investigated. The ICA-loaded electrospun membranes showed significant improvement in hydrophilicity, high mechanical strength, appropriate degradation rates and excellent biocompatibility. Furthermore, clear enhancement in alkaline phosphatase (ALP) activity, as well as an increase in osteocalcin (OCN) and type collagen I (COL I) expression in MC3T3-E1 cells were detected. Furthermore, we observed clear calcium deposition content in MC3T3-E1 cells cultured on ICA-loaded fibrous matrix. The membrane loaded with 0.05 wt.% ICA displayed properties contributing to cell attachment, proliferation and differentiation. These results indicate the huge potential of this ICA-loaded PCL/gelatin electrospun membrane as a biomimetic artificial periosteum to accelerate bone regeneration.

Honeycomb-like polysulphone/polyurethane nanofiber filter for the removal of organic/inorganic species from air streams

Nanofiber nonwoven filters, especially those prepared by electrospinning, are of particular interest because of their high filtration efficiency. However, existing electrospun filters suffer from inherent limitations in that both strengths and filtration resistances of the filters leave much to be desired. Herein, we present a novel nonwoven filter that is composed of polysulphone and polyurethane nanofibers. By mimicking the honeycomb structure, a heterogeneous distribution of both fiber diameter and fiber density has been achieved. Compared with nanofiber nonwovens with plain architectures, the honeycomb-like nonwovens possess higher filtration efficiency (∼99.939%), better mechanical strength (∼105.24 N g^-1) and improved quality factor (∼0.04 Pa^-1). The filtration efficiency against both inorganic and organic aerosols is guaranteed through the nanofiber surface geometry and the intrinsic charge-retention capacity of polysulphone. Since the production of this nanofiber filter does not need multistep procedures and can be easily scaled up on a needleless electrospinning device, we anticipate that the strategy of endowing nanofibers with honeycomb texture and charge-retention capacity may lead to the development of advanced fiber filters.

An epigenetic bioactive composite scaffold with well-aligned nanofibers for functional tendon tissue engineering

Poor tendon repair is often a clinical challenge due to the lack of ideal biomaterials. Electrospun aligned fibers, resembling the ultrastructure of tendon, have been previously reported to promote tenogenesis. However, the underlying mechanism is unclear and the aligned fibers alone are not capable enough to commit teno-differentiation of stem cells. Here, based on our observation of reduced expression of histone deacetylases (HDACs) in tendon stem/progenitor cells (TSPCs) cultured on aligned fibers, we proposed a strategy to enhance the tenogenesis effect of aligned fibers by using a small molecule Trichostatin A (TSA), an HDAC inhibitor. Such a TSA-laden poly (l-lactic acid) (PLLA) aligned fiber (A-TSA) scaffold was successfully fabricated by a stable jet electrospinning method, and demonstrated its sustained capability in releasing TSA. We found that TSA incorporated aligned fibers of PLLA had an additive effect in directing tenogenic differentiation. Moreover, the in situ implantation study in rat model further confirmed that A-TSA scaffold promoted the structural and mechanical properties of the regenerated Achilles tendon. This study demonstrated that HDAC was involved in the teno-differentiation with aligned fiber topography, and the combination of HDAC with aligned topography might be a more efficient strategy to promote tenogenesis of stem cells.

STATEMENT OF SIGNIFICANCE

Electrospun aligned fibers, resembling the ultrastructure of tendon, have been previously reported to promote tenogenesis. However, the underlying mechanism is unclear and the aligned fibers alone are not capable enough to commit teno-differentiation of stem cells. The uniqueness of our studies are as follows, based on our observation of reduced expression of histone deacetylases (HDACs) in tendon stem/progenitor cells (TSPCs) cultured on aligned fibers, we proposed a strategy to enhance the tenogenesis effect of aligned fibers by using a small molecule Trichostatin A (TSA), a HDAC inhibitor. Such a TSA-laden poly (l-lactic acid) (PLLA) aligned fiber (A-TSA) scaffold was successfully fabricated by a stable jet electrospinning method, and demonstrated its sustained capability in releasing TSA. The incorporation and subsequent release of bioactive small molecule TSA into electrospun aligned fibers allows a controllable manner for both biochemical and physical regulation of tenogenesis of stem cells both in vitro and in vivo. Collectively, the present study provides a model of "translating the biological knowledge learned from cell-material interaction into optimizing biomaterials (from Biomat-to-Biomat)".