Antimicrobial N-halamine polymers and coatings: a review of their synthesis, characterization, and applications

Fabrication of multifunctional cotton fabrics with quaternized N-halamine endowing the synergetic rechargeable antibacterial, wound healing and self-cleaning performances

Cotton has attracted considerable attention due to its functional characteristics. The focus of research on cotton has shifted in recent years towards designing multi-functional and modified media for cotton fibers, which can be firmly combined with textiles, giving them reusability and extending their service life. This study constructed a synergistic antibacterial layer of quaternary ammonium compounds (QACs) and N-halamine (Hals) using an in-situ free radical copolymerization method in water, named QACs/Hals@cotton-Cl. The route significantly increases the number of antibacterial active centers. FTIR, XPS, and SEM were used to systematically analyze the product's chemical structure, surface morphology, and other characteristics. The modified fabric's antibacterial efficiency, wound healing, renewability, and durability were also evaluated. The chlorinated modified cotton fabric could completely eradicate S. aureus and E. coli within 10 min. Compared with pure cotton, it notably promoted the healing rate of infected wounds in mice. The modification method imparted excellent hydrophobicity to the cotton fabric, with a contact angle exceeding 130°, making it easy to remove surface stains. After 30 days of regular storage and 24 h of UV irradiation, the active chlorine concentration (Cl+%) only decreased by 25 % and 39 %, respectively, and the reduced Cl+% was effectively recharged via simple re-chlorination. The hydrophobicity and antimicrobial properties of QACs/Hals@cotton-Cl remained stable even after 20 cycles of friction. This simple synthesis technique provides a convenient approach for the scalable fabrication of multifunctional and rechargeable antibacterial textiles, with potential applications in medical devices and personal hygiene protection.

Nonleaching Biocidal N-Halamine-Functionalized Polyamine-, Guanidine-, and Hydantoin-Based Coatings

Fibrous materials with inherent antimicrobial properties can help in real-time deactivation of microorganisms, enabling multiple uses while reducing secondary infections. Coatings with antiviral polymers enhance the surface functionality for existing and potential future pandemics. Herein, we demonstrated a straightforward route toward biocidal surface creation using polymers with nucleophilic biguanide, guanidine, and hydantoin groups that are covalently attached onto a solid support. Biocidal poly(N-vinylguanidine) (PVG) and poly(allylamine-co-4-aminopyridine-co-5-(4-hydroxybenzylidene)hydantoin) (PAH) were introduced for coating applications along with commercially available polyvinylamine (PVAm) and poly(hexamethylene biguanide) (PHMB). Nonleaching coatings were created by first fabricating bifunctional siloxane or isocyanate precursor coatings on the cotton, nylon-cotton, and glass fiber fabric, followed by the polymer attachment. The developed grafting methods ensured the stability of the coating and the reuse of the material while maintaining the biocidal properties. Halogenation of polymer-coated fabric was conducted by aqueous solutions of sodium hypochlorite or in situ generation of hypobromous acid (HOBr), resulting in surfaces coated by N-halamines with high contents of active > N-Cl or > N-Br groups. The polymer-coated fabrics were stable in multiple laundry cycles and maintained hydrophilic character after coating and halogenation. Halogenated polymer-coated fabrics completely inactivated human respiratory coronavirus based on a contact-killing mechanism and were shown to be reusable after recharging with bromine or chlorine.

Highly biocidal poly(vinyl alcohol)-hydantoin/starch hybrid gels: A "Trojan Horse" for Bacillus subtilis

HYPOTHESIS

Poly (vinyl alcohol) (PVA) cryogels can be functionalized with n-Halamines to confer biocidal features useful for their application as wound-dressing tools. Their efficacy can be boosted by stably embedding a polymeric bacterial food source (e.g., starch) in the gel matrix. The bioavailability of the food source lures bacteria inside the gel network via chemotactic mechanisms, promoting their contact with the biocidal functionalities and their consequent inactivation.

EXPERIMENTS

The synthesis of a novel hydantoin-functionalized PVA (H-PVA-hyd) is proposed. The newly synthesized H-PVA-hyd polymer was introduced in the formulation of H-PVA-based cryogels. To promote the cryogelation of the systems we exploited phase-separation mechanisms employing either a PVA carrying residual acetate groups (L-PVA) or starch as phase-segregating components. The permanence of the biocidal functionality after swelling was investigated via proton nuclear magnetic resonance (1H NMR) and Fourier transform infrared (FT-IR) microscopy. The activated H-PVA-hyd cryogels have been tested against bacteria with amylolytic activity (Bacillus subtilis) and the outcomes were analyzed by direct observation via confocal laser scanning microscopy (CLSM).

FINDINGS

The cryogels containing starch resulted in being the most effective (up to 90% bacterial killing), despite carrying a lower amount of hydantoin groups than their starch-free counterparts, suggesting that their improved efficacy relies on a "Trojan Horse" type of mechanism.

Multifunctional polymeric guanidine and hydantoin halamines with broad biocidal activity

Prolonged and excessive use of biocides during the coronavirus disease era calls for incorporating new antiviral polymers that enhance the surface design and functionality for existing and potential future pandemics. Herein, we investigated previously unexplored polyamines with nucleophilic biguanide, guanidine, and hydantoin groups that all can be halogenated leading to high contents of oxidizing halogen that enables enhancement of the biocidal activity. Primary amino groups can be used to attach poly(N-vinylguanidine) (PVG) and poly(allylamine-co-4-aminopyridine-co-5-(4-hydroxybenzylidene)hydantoin) (PAH) as well as a broad-spectrum commercial biocide poly(hexamethylene biguanide) (PHMB) onto a solid support. Halogenation of polymer suspensions was conducted through in situ generation of excess hypobromous acid (HBrO) from bromine and sodium hydroxide or by sodium hypochlorite in aqueous solutions, resulting in N-halamines with high contents of active > N-Br or > N-Cl groups. The virucidal activity of the polymers against human respiratory coronavirus HCoV-229E increased dramatically with their halogenation. Brominated PHMB-Br showed activation activity value > 5 even at 1 mg/L, and complete virus inhibition was observed with either PHMB-Br or PAH-Br at 10 mg/mL. Brominated PVG-Br and PAH-Br possessed fungicidal activity against C. albicans, while PHMB was fungistatic. PHMB, PHMB-Br and PAH polymers demonstrated excellent bactericidal activity against the methicillin-resistant S. aureus and vancomycin-resistant E. faecium. Brominated polymers (PHMB-Br, PVG-Br, PAH-Br) were not toxic to the HeLa monolayers, indicating acceptable biocompatibility to cultured human cells. With these features, the N-halamine polymers of the present study are a worthwhile addition to the arsenal of biocides and are promising candidates for development of non-leaching coatings.

Low Molecular Weight Shuttle Molecules Enhance Polychloramide Antimicrobial Activity

Investigated were the influences of succinimide (SI), 5,5-dimethylhydantoin (DMH), and 3-(hydroxymethyl)-5,5-dimethylhydantoin (HDMH) on the biocidal activity of chlorinated, water-soluble polyamide prepared by the reaction of isopropylamine with poly(styrene-alt-maleic anhydride). The resulting polymer was a negatively charged, water-soluble polymer bearing a carboxylic acid and an isopropylamide moiety on nearly every repeat unit. Subsequent treatment with NaOCl chlorinated the polymers to up to 4.4% Cl while inflicting some polymer chain scission. SI, DMH, or HDMH increased the biocidal activity of polychloramides toward planktonic Escherichia coli and Staphylococcus aureus. Independent solution studies confirmed that oxidative chlorine spontaneously transferred from aqueous polychloramides to small molecules. We concluded that SI, DMH, and HDMH acted as shuttles that extracted oxidative Cl from the polymer chloramides and transported oxidative Cl more efficiently to microbial surfaces. Succinimide was the most effective shuttle. These results warn that some low molecular weight soluble molecules in antimicrobial testing solutions may exaggerate the effectiveness of the polymer or immobilized antimicrobial agents.

Insights into the fate and properties of organic halamines during ultraviolet irradiation: Implications for drinking water safety

Organic halamines compounds present a significant threat to the safety of drinking water due to their potential toxicity and stability. While Ultraviolet (UV) disinfection is commonly used for water treatment, its specific effects on organic halamines and the underlying mechanisms remain poorly understood. In this study, we investigated eight amino acid-derived organic chlor- and bromamines as representative compounds. Our findings revealed that organic halamines have a slow hydrolysis rate (<10-3 M-1 s-1) and can persist in water for extended periods (30-2000 min). However, their disinfection efficacy against Staphylococcus aureus and their ability to degrade micropollutants like carbamazepine were found to be limited. Interestingly, under UV irradiation, the N-X bonds in organic halamines were observed to break, leading to accelerated decomposition and the generation of abundant free radicals. These free radicals synergistically facilitated the removal of micropollutants and the inactivation of pathogenic microorganisms. It is worth noting that this transformation of organic halamines during UV disinfection resulted in a slight increase in the concentrations of nitrogenous disinfection byproducts. These findings shed light on the behavior and characteristics of organic halamines during UV disinfection processes, providing crucial insights for effectively managing drinking water quality impacted by these compounds. By understanding the implications of organic halamines, we can refine water treatment strategies and ensure the safety of drinking water supplies.

Peelable Alginate Films Reinforced by Carbon Nanofibers Decorated with Antimicrobial Nanoparticles for Immediate Biological Decontamination of Surfaces

This study presents the synthesis and characterization of alginate-based nanocomposite peelable films, reinforced by carbon nanofibers (CNFs) decorated with nanoparticles that possess remarkable antimicrobial properties. These materials are suitable for immediate decontamination applications, being designed as fluid formulations that can be applied on contaminated surfaces, and subsequently, they can rapidly form a peelable film via divalent ion crosslinking and can be easily peeled and disposed of. Silver, copper, and zinc oxide nanoparticles (NPs) were synthesized using superficial oxidized carbon nanofibers (CNF-ox) as support. To obtain the decontaminating formulations, sodium alginate (ALG) was further incorporated into the colloidal solutions containing the antimicrobial nanoparticles. The properties of the initial CNF-ox-NP-ALG solutions and the resulting peelable nanocomposite hydrogels (obtained by crosslinking with zinc acetate) were assessed by rheological measurements, and mechanical investigations, respectively. The evaluation of Minimal Inhibitory Concentration (MIC) and Minimal Bactericidal Concentration (MBC) for the synthesized nanoparticles (silver, copper, and zinc oxide) was performed. The best values for MIC and MBC were obtained for CNF-ox decorated with AgNPs for both types of bacterial strains: Gram-negative (MIC and MBC values (mg/L): E. coli-3 and 108; P. aeruginosa-3 and 54) and Gram-positive (MIC and MBC values (mg/L): S. aureus-13 and 27). The film-forming decontaminating formulations were also subjected to a microbiology assay consisting of the time-kill test, MIC and MBC estimations, and evaluation of the efficacity of peelable coatings in removing the biological agents from the contaminated surfaces. The best decontamination efficiencies against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa varied between 97.40% and 99.95% when employing silver-decorated CNF-ox in the decontaminating formulations. These results reveal an enhanced antimicrobial activity brought about by the synergistic effect of silver and CNF-ox, coupled with an efficient incorporation of the contaminants inside the peelable films.

Impacts of non-microbial soils on polychloramide disinfectants

The presence of some nonmicrobial chemicals and surfaces, herein called "soils", are known to degrade the performance of biocides, and biocidal assays often include mixtures of materials to mimic the effects of soils. We hypothesized that water-soluble anionic polychloramide biocides were less sensitive to soil interference than cationic polymeric biocides. The relationships between soil composition and antimicrobial polymer biocidal activity were compared for an anionic polychloramide, a cationic polychloramide, and a cationic poly(quaternary ammonium) biocide. The nanoscale soil models individually investigated were polyacrylic acid (PAA), cellulose nanocrystals (CNCs), and bovine serum albumin. The low molecular weight model soils were ammonium chloride, glycine, and succinimide. Three types of soil impacts were identified: 1) sequestration, whereby the soil physically inhibited transport of the biocide to microbes; 2) extraction, whereby the soil reduced or extracted oxidative chlorine, decreasing or eliminating the oxidative chlorine strength; and 3) extraction whereby the biocidal activity increases in the presence of a low molecular weight chemical that carries oxidative Cl from the polymer to the microbes. PAA and CNCs inhibit cationic biocides by sequestration but have little impact on anionic polychloramide. Glycine and BSA extract oxidative chlorine, lowering the biocidal activity of the anionic and cationic polychloramides while not impacting the poly(quaternary ammonium) biocide. Finally, the presence of succinimide increased bacteria deactivation of both anionic and cationic polychloramides. We propose that succinimide extracts oxidative chlorine from the polychloramides and transports it to the bacteria.

Preparation and Functionalization of Polymers with Antibacterial Properties-Review of the Recent Developments

The presence of antibiotic-resistant bacteria in our environment is a matter of growing concern. Consumption of contaminated drinking water or contaminated fruit or vegetables can provoke ailments and even diseases, mainly in the digestive system. In this work, we present the latest data on the ability to remove bacteria from potable water and wastewater. The article discusses the mechanisms of the antibacterial activity of polymers, consisting of the electrostatic interaction between bacterial cells and the surface of natural and synthetic polymers functionalized with metal cations (polydopamine modified with silver nanoparticles, starch modified with quaternary ammonium or halogenated benzene). The synergistic effect of polymers (N-alkylaminated chitosan, silver doped polyoxometalate, modified poly(aspartic acid)) with antibiotics has also been described, allowing for precise targeting of drugs to infected cells as a preventive measure against the excessive spread of antibiotics, leading to drug resistance among bacteria. Cationic polymers, polymers obtained from essential oils (EOs), or natural polymers modified with organic acids are promising materials in the removal of harmful bacteria. Antimicrobial polymers are successfully used as biocides due to their acceptable toxicity, low production costs, chemical stability, and high adsorption capacity thanks to multi-point attachment to microorganisms. New achievements in the field of polymer surface modification in order to impart antimicrobial properties were summarized.

Zwitterion and N-halamine functionalized cotton wound dressing with enhanced antifouling, antibacterial, and hemostatic properties

With emerging needs of wound care management, a multi-functional wound dressing is needed. To prevent infection and reduce patient suffering, antibacterial efficacy against a broad-spectrum of bacteria plus robust antifouling are among the most preferred properties. In this study, a wound dressing was created with antibacterial and anti-fouling capabilities is presented. The approaches used a synthesized tri-functional copolymer comprised of an N-halamine precursor moiety, a marine-inspired surface binding dopamine moiety, and a zwitterionic anti-adhesion moiety bonded onto a commercial cotton gauze. The resulting HaloCare™ wound dressing demonstrated >99.99 % inactivation within 5 min against E. coli and a panel of ESKAPE pathogens plus achieved 98.77 % reduction of non-specific protein binding. HaloCare was also shown to be compatible with hemostatic agents without impacting hemostatic efficacy. HaloCare shows great potential particularly in traumatic injury events as an infection preventing and hemostatic wound management system.

Ultrasound-assisted bromination of indazoles at the C3 position with dibromohydantoin

Bromoaryl compounds have attracted great attention in organic chemistry, especially for the synthesis of pharmaceutical intermediates. Herein, we demonstrated a novel and efficient bromination protocol of indazoles via C-H bond cleavage to give site-specific 3-bromide products that could be further employed as synthetic blocks to prepare drugs. The reaction used DBDMH as a bromine source, tolerated a wide range of indazoles, and finished in 30 min under mild, ultrasound-assisted conditions. Besides, preliminary mechanistic studies revealed that this approach was not a radical process.

N-halamine surface coating for mitigation of biofilm and microbial contamination in water systems for space travel

A copolymer termed HASL produced from monomeric units of 2-acrylamido-2-methyl-1-(5-methylhydantoinyl)propane (HA) and of 3-(trimethoxysilyl)propyl methacrylate (SL) has been coated onto stainless steel and Inconel™ substrates, which upon halogenation with either aqueous oxidative chlorine or bromine, became antimicrobial. It has been demonstrated that the halogenated stainless steel and Inconel™ substrates were effective in producing 6 to 7 log inactivations of Staphylococcus aureus and Escherichia coli O157:H7 within about 10 min, and in prevention of Pseudomonas aeruginosa biofilm formation over a period of at least 72 h on the stainless steel substrates. Upon loss of halogen, the HASL coating could be re-charged with aqueous halogen. The HASL coating was easily applied to the substrates via a simple dip-coating method and was reasonably stable to contact with water. Both chlorinated substrates could be loaded with at least 6 × 1016 oxidative Cl atoms per cm2 and maintained a loading of greater than 1 × 1016 chlorine atoms per cm2 for a period of 3-7 days while agitated in aqueous solution. After loss of chlorine to a level below 1 × 1016 atoms per cm2, the substrates could be recharged to the 6 × 1016 Cl atoms per cm2 level for at least 5 times over a 28 day period. The new antimicrobial coating technology has potential for use in a variety of important applications, particularly for water treatment and storage on spacecraft.

Virucidal properties of new multifunctional fibrous N-halamine-immobilized styrene-divinylbenzene copolymers

Virucidal properties of N-chlorosulfonamides immobilized on fibrous styrene-divinylbenzene copolymers have been studied. Corresponding materials with different functional group structures and chlorine content have been synthesized on FIBAN polymer carriers in the form of staple fibers and non-woven fabrics. The study has been conducted in general accordance with EN 14476 standard on poliovirus type-1 and adenovirus type-5. It has been found that all tested samples exhibit pronounced virucidal activity: regardless of the carrier polymer form, sodium N-chlorosulfonamides inactivated both viruses in less than 30 s, and N,N-dichlorosulfonamides—in 30–60 s. The main mechanism of action of these materials, obviously, consists in the emission of active chlorine from the functional group into the treated medium under the action of the amino groups of virus fragments and cell culture. Considering the previously described antimicrobial and reparative properties of such materials, as well as their satisfactory physical and mechanical properties, the synthesized polymers are promising for the creation of medical devices with increased resistance to microbial contamination, such as protective masks, filter elements, long-acting wound dressings, and others.

Modeling the Impact of Polychloramide Solution Properties on Bacterial Disinfection Kinetics

Anionic water-soluble polychloramide biocides are of interest because, compared to conventional cationic antimicrobial polymers, anionic biocides are less likely to be sequestered or deactivated by contact with non-microbial soil. Although electrostatics can prevent anionic polymers from adsorbing on microbes, water-soluble polychloramides appear to transfer oxidative chlorine during transient contacts between polymer chains and microbe surfaces. The Chick-Watson model of disinfection kinetics has been modified to account for the contributions of polychloramide molecular weight (MW) and the polychloramide configuration in solution estimated from the overlap concentration, C*, below which dilute polymer chains exist as discrete objects in solution. The key assumption in the modeling was that the transfer rate of oxidative chlorine from polychloramide chains to microbe surfaces impacts the disinfection kinetics. Because both C* and MW are measurable, the polymer-modified Chick-Watson (PCW) model has one less unknown parameter than the two-parameter Chick-Watson equation. The PCW model predicts that lower MW polymers are more effective biocides compared with high MW counterparts. Additionally, polymers with more compressed configurations in solution are more effective biocides. Experimental evidence supports these conclusions. Based on the estimated time scale of bacteria/polymer collisions compared with disinfection kinetics, arguments are made that bacteria surfaces must be contracted many times by polychloramide chains to achieve sufficient Cl transfer to deactivate bacteria.

Addressing a future pandemic: how can non-biological complex drugs prepare us for antimicrobial resistance threats?

Loss of effective antibiotics through antimicrobial resistance (AMR) is one of the greatest threats to human health. By 2050, the annual death rate resulting from AMR infections is predicted to have climbed from 1.27 million per annum in 2019, up to 10 million per annum. It is therefore imperative to preserve the effectiveness of both existing and future antibiotics, such that they continue to save lives. One way to conserve the use of existing antibiotics and build further contingency against resistant strains is to develop alternatives. Non-biological complex drugs (NBCDs) are an emerging class of therapeutics that show multi-mechanistic antimicrobial activity and hold great promise as next generation antimicrobial agents. We critically outline the focal advancements for each key material class, including antimicrobial polymer materials, carbon nanomaterials, and inorganic nanomaterials, and highlight the potential for the development of antimicrobial resistance against each class. Finally, we outline remaining challenges for their clinical translation, including the need for specific regulatory pathways to be established in order to allow for more efficient clinical approval and adoption of these new technologies.

Enhancing the antibacterial property of chitosan through synergistic alkylation and chlorination

Chitosan exhibits moderate antimicrobial properties. Here, we enhanced the antimicrobial properties of chitosan through alkylation and chlorination and evaluated the effect of alkylation on chitosan's hydrophobicity, bacterial attachment, chlorination, biocidal property, and stability. First, chitosan films were prepared through casting and were then immersed in a hexanal solution of different concentrations. The aldehyde groups of hexanal reacted with the amino group in chitosan through a Schiff base reaction. Next, the hexanal-modified chitosan films were soaked in 10 % bleach to form N-halamine. The results demonstrated that the surface became more hydrophobic, and chitosan films with increased hexanal-grafting concentrations exhibited less bacterial attachment. However, the degree of chlorination decreased as the degree of alkylation increased, further reducing the diameter of the zone of inhibition. Nevertheless, all chlorinated samples could kill ~5 log of Staphylococcus aureus and Escherichia coli within 30 min. Unlike previous results for chlorinated chitosan, in this study, alkylation before chlorination enhanced antibacterial properties and bactericidal ability and decelerated the degradation of chlorinated samples. The results of a systematic evaluation indicated that a hexanal-grafting concentration of approximately 80 mM maintains the equilibrium of the various properties of chitosan. Alkylated and chlorinated chitosan has considerable potential application as mask filter layers.

Water-soluble anionic polychloramide biocides based on maleic anhydride copolymers

Our goal was to develop film-forming polymers to extend the antimicrobial lifetimes of cleaned and disinfected surfaces. Antimicrobial polymers were prepared by first reacting poly(ethylene-alt-maleic anhydride) with isopropylamine, partially consuming the anhydride groups, followed by hydrolysis to give water-soluble, highly anionic polyamide PC3. Chlorination with NaOCl gave PC3Cl with oxidative chlorine contents up to 9 wt%. Dried, 5 µm thick, PC3Cl films, gave log 4 reductions in the concentration of Escherichia coli or Staphylococcus aureus exposed to films. A unique feature of the maleic anhydride copolymer platform was the ability to form covalent grafts to surfaces via anhydride reactions. PC3 solution was impregnated into cellulosic filter paper, heated to form ester linkages with cellulose, followed by chlorination with sodium dichloroisocyanurate dihydrate giving grafted PC3Cl. The treated paper (0.3 wt% PC3Cl) gave a log 4 reduction of E. coli concentration in 30 min.

Optimization and Antibacterial Response of N-Halamine Coatings Based on Polydopamine

Due to the ability of microorganisms to first adhere to a material surface and then to lead to the formation of a biofilm, it is essential to develop surfaces that have antimicrobial properties. It is well known that N-halamine coatings allow us to prevent or minimize such phenomena. In the present work, various polydopamine (PDA) coatings containing chloramine functions were studied. In fact, three PDA-based films were formed by the simple immersion of a gold substrate in a dopamine solution, either at pH 8 in the presence or not of polyethyleneimine (PEI), or at pH 5 in the presence of periodate as an oxidant. These films were characterized by polarization modulation reflection absorption infrared spectroscopy and X-ray photoelectron spectroscopy analyses, and by scanning electron microscopy observations. The chlorination of these PDA films was performed by their immersion in a sodium hypochlorite aqueous solution, in order to immobilize Cl(+I) into the (co)polymers (PDA or PDA–PEI). Finally, antibacterial assays towards the Gram-negative bacteria Escherichia coli (E. coli) and the Gram-positive bacteria Staphylococcus epidermidis (S. epidermidis) were conducted to compare the bactericidal properties of these three N-halamine coatings. Regardless of the bacteria tested, the PDA coating with the best antibacterial properties is the coating obtained using periodate.

Promising Methods of Antibacterial Finishing of Textile Materials

A review article, containing information on the options, possibilities, and prospects for the development of antibacterial finishing of textile materials, is presented. A wide range of products designed to impart antibacterial, antimicrobial, and antiviral properties to textile materials is considered. The main factors determining the appropriate decision on the technological and functional choice of the protective composition are presented, including the nature of the fiber-forming polymer, the tasks that the resulting material is designed to solve, and its application options. Compositions providing the required effect of destruction of the pathogenic flora and their application technologies are described. Special attention is paid to antimicrobial agents based on silver nanoparticles. Nanoparticles of this metal have a detrimental effect on antibiotic-resistant strains of bacteria; their effectiveness is higher as compared to a number of well-known antibiotics, for example, penicillin and its analogues. Silver nanoparticles are harmless to the human body. Acting as an inhibitor, they limit the activity of the enzyme responsible for oxygen consumption by single-cell bacteria, viruses, and fungi. In this case, silver ions bind to the outer and inner proteins of the bacterial cell membranes, blocking cellular respiration and reproduction. Various options to apply microencapsulation methods for the implementation of antibacterial finishing are considered, including: phase separation, suspension crosslinking, simple and complex coacervation, spray drying, crystallization from the melt, evaporation of the solvent, co-extrusion, layering, fluidized bed spraying, deposition, emulsion and interphase polymerization, layer-by-layer electrostatic self-assembly etc. All presented technologies are at various development stages-from the laboratory stage to production tests, they all have certain advantages and disadvantages. The accelerated development and implementation of the described methods in production of textile materials is relevant and is related to the existing complex epidemiological situation in the world.

Accurate experimental characterization of the labile N–Cl bond in N-chloro-N′-(p-fluorophenyl)-benzamidine crystal at 17.5 K

Very low temperature can preserve the photolabile N–Cl bond in a N-chloro-N-benzamidine derivative long enough to carry on an accurate experimental X-ray charge density study.

Acute inhalation toxicity of aerosolized electrochemically generated solution of sodium hypochlorite

OBJECTIVE

The objective was to determine the inhalation toxicity of the electrochemically generated sodium hypochlorite solution after its single administration to laboratory animals in the form of a highly dispersed aerosol.

MATERIALS AND METHODS

The study has been conducted according to the OECD Test Guideline №403 'Acute Inhalation Toxicity.' Laboratory animals were exposed to inhalation of an aerosol containing 1.7 ± 0.13 mg/m³ of active chlorine. The hematological and biochemical parameters of the blood of experimental animals have been determined, as well as specific parameters: the activity of cathepsins B and L, catalase, and α1-antitrypsin. Histological study of the lungs of animals has been carried out.

RESULTS

During inhalation and 14 days after it, no death of the animals was observed; the behavior, appearance, and weight gain did not differ from the control group. There were no significant deviations in hematological parameters, except the decrease in the level of platelets. The biochemical study showed slight changes in the activity of alkaline phosphatase and aspartate aminotransferase on the 1st day after inhalation; these parameters returned to normal within 14 days of observation. Specific biochemical parameters did not show the development of oxidative stress. No specific histological pathologies of lung tissue have been found.

CONCLUSIONS

Thus, the studied electrochemically generated sodium hypochlorite solution under single inhalation exposure in aerosol form practically does not cause a toxic effect. The data obtained allow classifying such solution to the 4th (or even 5th - after additional studies) class of toxicity in accordance with Globally Harmonized System of Classification and Labeling of Chemicals.

Contributions of photochemistry to bio-based antibacterial polymer materials

Surgical site infections constitute a major health concern that may be addressed by conferring antibacterial properties to surgical tools and medical devices via functional coatings. Bio-sourced polymers are particularly well-suited to prepare such coatings as they are usually safe and can exhibit intrinsic antibacterial properties or serve as hosts for bactericidal agents. The goal of this Review is to highlight the unique contribution of photochemistry as a green and mild methodology for the development of such bio-based antibacterial materials. Photo-generation and photo-activation of bactericidal materials are illustrated. Recent efforts and current challenges to optimize the sustainability of the process, improve the safety of the materials and extend these strategies to 3D biomaterials are also emphasized.

Past and Current Progress in the Development of Antiviral/Antimicrobial Polymer Coating towards COVID-19 Prevention: A Review

The astonishing outbreak of SARS-CoV-2 coronavirus, known as COVID-19, has attracted numerous research interests, particularly regarding fabricating antimicrobial surface coatings. This initiative is aimed at overcoming and minimizing viral and bacterial transmission to the human. When contaminated droplets from an infected individual land onto common surfaces, SARS-CoV-2 coronavirus is able to survive on various surfaces for up to 9 days. Thus, the possibility of virus transmission increases after touching or being in contact with contaminated surfaces. Herein, we aim to provide overviews of various types of antiviral and antimicrobial coating agents, such as antimicrobial polymer-based coating, metal-based coating, functional nanomaterial, and nanocomposite-based coating. The action mode for each type of antimicrobial agent against pathogens is elaborated. In addition, surface properties of the designed antiviral and antimicrobial polymer coating with their influencing factors are discussed in this review. This paper also exhibits several techniques on surface modification to improve surface properties. Various developed research on the development of antiviral/antimicrobial polymer coating to curb the COVID-19 pandemic are also presented in this review.

Materials in advanced design of personal protective equipment: a review

The outbreak of the Covid-19 pandemic has aroused tremendous attention toward personal protective equipment (PPE) in both scientific research and industrial manufacture. Despite decades of development in PPE design and fabrication, there's still much room for further optimization, in terms, of both protection performance and wear comfort. Interdisciplinary efforts have been devoted to this research field in recent years. Significantly, the innovation of materials, which brings about improved performance and versatile new functions for PPEs, has been widely adopted in PPE design. In this minireview, recent progress in the development of novel materials and structural designs for PPE application are presented in detail with the introduction of various material-based strategies for different PPE types, as well as the examples, which apply auxiliary components into face masks to enrich the functionalities and improve the personal feelings in the pandemic period.

Antiviral Polymers Based on N-Halamine Polyurea

N-halamines are a commonly applied class of antimicrobial agents used for a variety of applications relating to human health. Here, we present the modulation of the common polymers polyurea and polyguanidine with the N-halamine technology. The N-H bonds in either polymer were converted to N-Cl or N-Br bonds capable of releasing Cl⁺ or Br⁺ cations to aqueous media as antiviral agents. Controlled release of the oxidizing agents was monitored for a period of 4 weeks. Antiviral activity was evaluated against the T4 bacteriophage as well as against the highly stable plant virus belonging to the Tobamovirus genus, tomato brown rugose fruit virus. The incorporation of the N-halamine technology on commonly used polymers has effectively introduced antiviral functionality for a wide variety of potential applications.

Enhanced Medical and Community Face Masks with Antimicrobial Properties: A Systematic Review

Face masks help to limit transmission of infectious diseases entering through the nose and mouth. Beyond reprocessing and decontamination, antimicrobial treatments could extend the lifetime of face masks whilst also further reducing the chance of disease transmission. Here, we review the efficacy of treatments pertaining antimicrobial properties to medical face masks, filtering facepiece respirators and non-medical face masks. Searching databases identified 2113 studies after de-duplication. A total of 17 relevant studies were included in the qualitative synthesis. Risk of bias was found to be moderate or low in all cases. Sixteen articles demonstrated success in avoiding proliferation (if not elimination) of viruses and/or bacteria. In terms of methodology, no two articles employed identical approaches to efficacy testing. Our findings highlight that antimicrobial treatment is a promising route to extending the life and improving the safety of face masks. In order to reach significant achievements, shared and precise methodology and reporting is needed.

A Novel N-Halamine Biocidal Nanofibrous Membrane for Chlorine Rechargeable Rapid Water Disinfection Applications

Disinfecting pathogenic contaminated water rapidly and effectively on sites is one of the critical challenges at point-of-use (POU) situations. Currently available technologies are still suffering from irreversible depletion of disinfectants, generation of toxic by-products, and potential biofouling problems. Herein, we developed a chlorine rechargeable biocidal nanofibrous membrane, poly(acrylonitrile-co-5-methyl-5-(4'-vinylphenyl)imidazolidine-2,4-dione) (P(AN-VAPH)), via a combination of a free radical copolymerization reaction and electrospun technology. The copolymer exhibits good electrospinnability and desirable mechanical properties. Also, the 5-methyl-5-(4'-vinylphenyl)imidazolidine-2,4-dione (VAPH) moieties containing unique hydantoin structures are able to be chlorinated and converted to halamine structures, enabling the P(AN-VAPH) nanofibrous membrane with rapid and durable biocidal activity. The chlorinated P(AN-VAPH) nanofibrous membranes showed intriguing features of unique 3D morphological structures with large specific surface area, good mechanical performance, rechargeable chlorination capacity (>5000 ppm), long-term durability, and desirable biocidal activity against both bacteria and viruses (>99.9999% within 2 min of contact). With these attributes, the chlorinated P(AN-VAPH) membranes demonstrated promising disinfecting efficiency against concentrated bacteria-contaminated water during direct filtration applications with superior killing capacity and high flowing flux (5000 L m^-2 h^-1).

Rapid Biocidal Activity of N-Halamine-Functionalized Polydopamine and Polyethylene Imine Coatings

Microorganisms easily adhere to the surface of substrates and further form biofilms, which present problems in various fields. Therefore, the development of surfaces with antimicrobial adhesion or viability is a promising approach. In this study, we were committed to develop a rapid sterilizing coating. First, polyester fibers were immersed into a mixing solution of dopamine (PDA) and polyethyleneimine (PEI) for forming the co-deposition of PDA and PEI coatings. After this, the co-deposition of PDA and PEI coatings was immersed in a solution of household bleach for chlorination. We found that the nitrogens of PDA and PEI could be chlorinated repeatedly and that the oxidative chlorine content increased with the increasing PEI concentration upon co-deposition. Next, the efficacy of the co-deposition of chlorinated PDA and PEI coatings in eliminating Staphylococcus aureus and Escherichia coli was investigated. We found that the antibacterial ability of the coatings increased with increasing PEI content. In addition, the chlorinated co-deposition coatings had significantly improved antibacterial properties compared to the unchlorinated ones. The chlorinated co-deposition coatings inactivated >99.99% of S. aureus and >99.9% of E. coli after contact of less than 10 min. Therefore, chlorination of a PDA/PEI co-deposition surface is a feasible method for use in antibacterial coatings.

A Brief Overview of Antimicrobial Nanotextiles Prepared by In Situ Synthesis and Deposition of Silver Nanoparticles on Cotton

Antimicrobial nanotextiles are prepared by coating or deposition of the biocides such as organic compounds or nanoparticles on the textile fibers. The deposition of silver nanoparticles (AgNPs) on textiles has received increased attention due to their well-known antimicrobial properties. Recently, the technique of in situ synthesis and deposition of AgNPs on cotton is being used frequently to prepare antimicrobial nanotextiles. The technique involves complexation of the Ag⁺ ions in cotton fibers followed by their reduction to generate the particles. This in situ synthesis and deposition approach provides several advantages over the post synthesis deposition or grafting process. In this brief overview, we have presented basic information about different biocides used to prepare antimicrobial nanotextiles and highlighted the importance of in situ synthesis and deposition of AgNPs on cotton to prepare the antimicrobial nanotextiles. The recent achievements in this field and future challenges that need to be addressed are presented.

Cow dung-derived biochars engineered as antibacterial agents for bacterial decontamination

Disposal of the pollutants arising from farming cattle and other livestock threatens the environment and public safety in diverse ways. Herein, we report on the synthesis of engineered biochars using cow dung as raw material, and investigating these biochars as antibacterial agents for water decontamination. By coating the biochars with N-halamine polymer and loading them with active chlorine (i.e., Cl⁺), we were able to regulate them on demand by tuning the polymer coating and bleaching conditions. The obtained N-halamine-modified biochars were found to be extremely potent against Escherichia coli and Staphylococcus aureus. We also investigated the possibility of using these N-halamine-modified biochars for bacterial decontamination in real-world applications. Our findings indicated that a homemade filter column packed with N-halamine-modified biochars removed pathogenic bacteria from mining sewage, dairy sewage, domestic sewage, and artificial seawater. This proposed strategy could indicate a new way for utilizing livestock pollutants to create on-demand decontaminants.

Emerging nanomaterials for antibacterial textile fabrication

In recent times, the search for innovative material to fabricate smart textiles has been increasing to satisfy the expectation and needs of the consumers, as the textile material plays a key role in the evolution of human culture. Further, the textile materials provide an excellent environment for the microbes to grow, because of their large surface area and ability to retain moisture. In addition, the growth of harmful bacteria on the textile material not only damages them but also leads to intolerable foul odour and significant danger to public health. In particular, the pathogenic bacteria present in the fabric surface can cause severe skin infections such as skin allergy and irritation via direct human contact and even can lead to heart problems and pneumonia in certain cases. Recently, nanoparticles and nanomaterials play a significant role in textile industries for developing functional smart textiles with self-cleaning, UV-protection, insect repellent, waterproof, anti-static, flame-resistant and antimicrobial-resistant properties. Thus, this review is an overview of various textile fibres that favour bacterial growth and potential antibacterial nanoparticles that can inhibit the growth of bacteria on fabric surfaces. In addition, the probable antibacterial mechanism of nanoparticles and the significance of the fabric surface modification and fabric finishes in improving the long-term antibacterial efficacy of nanoparticle-coated fabrics were also discussed.

Long-lasting renewable antibacterial porous polymeric coatings enable titanium biomaterials to prevent and treat peri-implant infection

Peri-implant infection is one of the biggest threats to the success of dental implant. Existing coatings on titanium surfaces exhibit rapid decrease in antibacterial efficacy, which is difficult to promisingly prevent peri-implant infection. Herein, we report an N-halamine polymeric coating on titanium surface that simultaneously has long-lasting renewable antibacterial efficacy with good stability and biocompatibility. Our coating is powerfully biocidal against both main pathogenic bacteria of peri-implant infection and complex bacteria from peri-implantitis patients. More importantly, its antibacterial efficacy can persist for a long term (e.g., 12~16 weeks) in vitro, in animal model, and even in human oral cavity, which generally covers the whole formation process of osseointegrated interface. Furthermore, after consumption, it can regain its antibacterial ability by facile rechlorination, highlighting a valuable concept of renewable antibacterial coating in dental implant. These findings indicate an appealing application prospect for prevention and treatment of peri-implant infection.

Antimicrobial Polymeric Structures Assembled on Surfaces

Pathogenic microbes are the main cause of various undesired infections in living organisms, including humans. Most of these infections are favored in hospital environments where humans are being treated with antibiotics and where some microbes succeed in developing resistance to such drugs. As a consequence, our society is currently researching for alternative, yet more efficient antimicrobial solutions. Certain natural and synthetic polymers are versatile materials that have already proved themselves to be highly suitable for the development of the next-generation of antimicrobial systems that can efficiently prevent and kill microbes in various environments. Here, we discuss the latest developments of polymeric structures, exhibiting (reinforced) antimicrobial attributes that can be assembled on surfaces and coatings either from synthetic polymers displaying antiadhesive and/or antimicrobial properties or from blends and nanocomposites based on such polymers.

Cross-Linked Polymer Brushes Containing N-Halamine Groups for Antibacterial Surface Applications

Microbial contamination is a significant issue in various areas, especially in the food industry. In this study, to overcome microbial contamination, cross-linked polymer brushes containing N-halamine were synthesized, characterized, and investigated for antibacterial properties. The cross-linked polymer brushes with different N-halamine ratios were synthesized by in-situ cross-linking methods with reversible addition-fragmentation chain transfer (RAFT) polymerization using a bifunctional cross-linker. The RAFT agent was immobilized on an amine-terminated silicon wafer surface and utilized in the surface-initiated RAFT polymerization of [N-(2-methyl-1-(4-methyl-2,5-dioxoimidazolidin-4-yl)propane-2-yl)acrylamide] (hydantoin acrylamide, HA), and N-(2-hydroxypropyl)methacrylamide) (HPMA) monomers. Measurement of film thickness, contact angle, and surface morphology of the resulting surfaces were used to confirm the structural characteristics of cross-linked polymer brushes. The chlorine content of the three different surfaces was determined to be approximately 8-31 × 1013 atoms/cm2. At the same time, it was also observed that the activation-deactivation efficiency decreased during the recharge-discharge cycles. However, it was determined that the prepared N-halamine-containing cross-linked polymer brushes inactivated approximately 96% of Escherichia coli and 91% of Staphylococcus aureus. In conclusion, in the framework of this study, high-performance brush gels were produced that can be used on antibacterial surfaces.

Polymeric Materials with Antibacterial Activity: A Review

Infections caused by bacteria are one of the main causes of mortality in hospitals all over the world. Bacteria can grow on many different surfaces and when this occurs, and bacteria colonize a surface, biofilms are formed. In this context, one of the main concerns is biofilm formation on medical devices such as urinary catheters, cardiac valves, pacemakers or prothesis. The development of bacteria also occurs on materials used for food packaging, wearable electronics or the textile industry. In all these applications polymeric materials are usually present. Research and development of polymer-based antibacterial materials is crucial to avoid the proliferation of bacteria. In this paper, we present a review about polymeric materials with antibacterial materials. The main strategies to produce materials with antibacterial properties are presented, for instance, the incorporation of inorganic particles, micro or nanostructuration of the surfaces and antifouling strategies are considered. The antibacterial mechanism exerted in each case is discussed. Methods of materials preparation are examined, presenting the main advantages or disadvantages of each one based on their potential uses. Finally, a review of the main characterization techniques and methods used to study polymer based antibacterial materials is carried out, including the use of single force cell spectroscopy, contact angle measurements and surface roughness to evaluate the role of the physicochemical properties and the micro or nanostructure in antibacterial behavior of the materials.

Antibacterial and Antiviral Functional Materials: Chemistry and Biological Activity toward Tackling COVID-19-like Pandemics

The ongoing worldwide pandemic due to COVID-19 has created awareness toward ensuring best practices to avoid the spread of microorganisms. In this regard, the research on creating a surface which destroys or inhibits the adherence of microbial/viral entities has gained renewed interest. Although many research reports are available on the antibacterial materials or coatings, there is a relatively small amount of data available on the use of antiviral materials. However, with more research geared toward this area, new information is being added to the literature every day. The combination of antibacterial and antiviral chemical entities represents a potentially path-breaking intervention to mitigate the spread of disease-causing agents. In this review, we have surveyed antibacterial and antiviral materials of various classes such as small-molecule organics, synthetic and biodegradable polymers, silver, TiO2, and copper-derived chemicals. The surface protection mechanisms of the materials against the pathogen colonies are discussed in detail, which highlights the key differences that could determine the parameters that would govern the future development of advanced antibacterial and antiviral materials and surfaces.

Fabrication of N-halamine polyurethane films with excellent antibacterial properties

An N-halamine precursor, namely, 2-amino-5-(2-hydroxyethyl)-6-methylpyrimidin-4-one (AHM), was used as a chain extender in the preparation of a series of N-halamine polyurethane (PU) films, in order to also instill antibacterial properties. The mechanical properties, thermodynamic performance, and antimicrobial performance of the functionalized PU films were systematically studied. The results showed that the addition of AHM could improve the thermodynamic and mechanical properties of the developed PU films. Conducting tests in the presence of Escherichia coli and Staphylococcus aureus as the model microorganisms revealed that prior to chlorination the antibacterial properties of the chlorinated PU-AHM-Cl films improved significantly relative to the analogous films. The excellent antibacterial properties and the overall superior performance of the PU-AHM-Cl films allow their potential application in microbiological protection materials and related fields.

Recent advances in the synthesis of organic chloramines and their insights into health care

Organic nitrogen–chlorine compounds and their derivatives are important heterocyclic motifs, exhibiting applications such as N-chlorinating agents, analytical reagents, disinfectants, antipathogens, and as synthetic intermediates for drugs, polymers, and natural products.

Highly Antibacterial Efficacy of a Cotton Fabric Treated with Piperazinyl Schiff Base

Due to the structure of hierarchical aligned cellulose fibrils, cotton fabric used in clothing possesses excellent moisture and thermal managements. Such structure yet may retain metabolic excrements and sebum secretions discharged from the human skin, which reproduce microorganisms harmful for human health. However, incorporating the antimicrobial coating into the cotton fabric can sufficiently resist the microorganism growth. In this work, a water-soluble antibacterial coating named N-(4-(allyloxy) benzylidene)-2-(piperazin-1-yl) ethanamine (NABPE) was synthesized to produce a rechargeable and fast sterilization cotton fiber fabric (M-cotton/NABPE). M-cotton/NABPE exhibited a high effective antibacterial activity, and the inhibition ratios against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were 94 % and 93 %, respectively. Chlorination was performed with sodium hypochlorite solution to form N-Cl bond on the M-cotton/NABPE fabrics, resulting in a high biocidal efficacy of up to 100 % via contact killing for a duration of 5 min. After 25 washing cycles, the antibacterial fabric still maintained an antibacterial rate of 91.95 % and 92.15 % against E. coli and S. aureus, respectively. Furthermore, the fabrics showed integrated properties of excellent UV stability, long-term stability, robust rechargeable biocidal activity (chlorine recharging >5000 ppm) and washing durability. This research provides fundamental insights into the synthesis of the NABPE and prolonged biocidal efficacy of the M-cotton/NABPE, and thereby pave a pathway to incorporate an economic and environmental-friendly antibacterial coating suitable for finishing cotton fabric.