Carbon−Carbon Coupling Reactions Catalyzed by Heterogeneous Palladium Catalysts

4-Iodobenzonitrile as a fluorogenic derivatization reagent for chromatographic analysis of L-p-boronophenylalanine in whole blood samples using Suzuki coupling reaction

BACKGROUND

L-p-Boronophehylalanine (BPA) is used in boron neutron capture therapy (BNCT), which is a novel selective cancer radiotherapy technique. It is important to measure BPA levels in human blood for effective radiotherapy; a prompt gamma-ray spectrometer, ICP-AES, and ICP-MS have been used for this purpose. However, these methods require sophisticated and expensive apparatuses as well as experienced analysts. Herein, we propose an HPLC-FL method for the determination of BPA after precolumn derivatization. A new fluorogenic reagent for aryl boronic acid derivatives, namely, 4-iodobenzonitrile, was employed for the fluorogenic derivatization of BPA based on the Suzuki coupling reaction.

RESULTS

After the fluorogenic derivatization, a fluorescent cyanobiphenyl derivative is formed with maximum fluorescence at 335 nm after excitation at 290 nm. The developed method showed good linearity (r2=0.997) over the concentration range of 0.5-1000 nmol/L, and the detection limit (S/N = 3) was 0.26 nmol/L. The proposed method is more sensitive than previously reported methods for the determination of BPA, including the ICP-MS. Finally, the proposed method was successively applied to the measurement of BPA in human whole blood samples with a good recovery rate (≥95.7 %) using only 10 μL of blood sample. The proposed method offers a simple and efficient solution for monitoring BPA levels in BNCT-treated patients.

SIGNIFICANCE

4-Iodobenzonitrile was investigated as a new fluorogenic reagent for BPA based on Suzuki coupling. A new HPLC-FL method for BPA in whole blood samples with ultrasensitivity was developed. The developed method is superior in sensitivity to all previously reported methods for BPA. The method requires only a very small sample volume, making it suitable for micro-blood analysis of BPA via fingerstick sampling.

Ecofriendly Protocol for ipso-Bromination of Arylboronic Acids

We report a novel and environmentally friendly method for the ipso-bromination of arylboronic acids by exploiting the oxone/KBr system. We discovered that CuBr can catalyze the reaction and increase the yield from 63 to 97%. We believe that CuBr might catalyze the in situ generation of HOBr from oxone/KBr. The mild reaction condition permits tolerance of a diverse array of functional groups with exclusive regio- and chemoselectivity and allows low-cost large-scale reaction without explosion risk.

The Influence of Ligands on the Pd-Catalyzed Diarylation of Vinyl Esters

The impact of ligands on the palladium-catalyzed 1,2-diarylation reaction course is presented. The application of Pd-dmpzc as a catalyst provides an efficient, chemoselective and sustainable protocol for the synthesis of valuable 1,2-diphenylethyl acetates. The reaction is conducted in water under mild conditions. Reaction products can be easily separated from the reaction mixture and catalyst by simple extraction. What is more, the rational choice of catalyst significantly reduces the leaching of the metal into the product and its contamination (0.1 ppm). Efficient phase separation and ultralow Pd leaching enable the reuse of the water medium containing the Pd-dmpzc catalyst several times without a significant loss of activity and with even higher selectivity (from 95% to 100% in the third cycle). The recyclability of both the catalyst and the reaction medium together with high chemoselectivity and low palladium leaching reduces the amount of waste and the cost of the process, exhibiting an example of a sustainable and green methodology.

Multicomponent synthesis via acceptorless alcohol dehydrogenation: an easy access to tri-substituted pyridines

Herein, we report palladium supported on a hydroxyapatite catalyst for synthesizing tri-substituted pyridines using ammonium acetate as the nitrogen source via acceptorless alcohol dehydrogenation strategy. The strategy offers a broad substrate scope using inexpensive and readily available alcohols as the starting material. The catalyst was prepared using a simple method and analyzed by several techniques, including FE-SEM, EDS, HR-TEM, BET, XRD, FT-IR, UV-visible spectroscopy, and XPS, demonstrating the anchoring of Pd nanoparticles on hydroxyapatite in the zero oxidation state. Moreover, several controlled experiments were carried out to understand the reaction pathway and a suitable mechanism has been proposed.

Palladium-Catalyzed Dehydrogenative Carbonylative Esterification of Allenoic Acids for the Synthesis of γ-Butyrolactone Derivatives

A highly efficient dehydrogenative carbonylative esterification of allenoic acids using Pd-catalysis was developed, providing a novel approach to synthesizing esterified γ-butyrolactone derivatives with consistently good to excellent results demonstrated across over 50 examples. Additionally, we used a heterogeneous catalyst known as Pd-AmP-MCF and harnessed biomimetic-aerobic-oxidation conditions to facilitate the practical execution of this reaction. Furthermore, our detailed study of γ-butyrolactone products highlighted their potential in synthesizing bioactive compounds.

Biosynthesis Parameters Control the Physicochemical and Catalytic Properties of Microbially Supported Pd Nanoparticles

The biosynthesis of Pd nanoparticles supported on microorganisms (bio-Pd) is achieved via the enzymatic reduction of Pd(II) to Pd(0) under ambient conditions using inexpensive buffers and electron donors, like organic acids or hydrogen. Sustainable bio-Pd catalysts are effective for C-C coupling and hydrogenation reactions, but their industrial application is limited by challenges in controlling nanoparticle properties. Here, using the metal-reducing bacterium Geobacter sulfurreducens, it is demonstrated that synthesizing bio-Pd under different Pd loadings and utilizing different electron donors (acetate, formate, hydrogen, no e- donor) influences key properties such as nanoparticle size, Pd(II):Pd(0) ratio, and cellular location. Controlling nanoparticle size and location controls the activity of bio-Pd for the reduction of 4-nitrophenol, whereas high Pd loading on cells synthesizes bio-Pd with high activity, comparable to commercial Pd/C, for Suzuki-Miyaura coupling reactions. Additionally, the study demonstrates the novel synthesis of microbially-supported ≈2 nm PdO nanoparticles due to the hydrolysis of biosorbed Pd(II) in bicarbonate buffer. Bio-PdO nanoparticles show superior activity in 4-nitrophenol reduction compared to commercial Pd/C catalysts. Overall, controlling biosynthesis parameters, such as electron donor, metal loading, and solution chemistry, enables tailoring of bio-Pd physicochemical and catalytic properties.

Pd-loaded hierarchical titanosilicalite-1 catalysts on CO2 cycloaddition with epoxides: Experimental and DFT investigations

This work presents the synthesis of Pd-loaded microporous titanosilicalite-1 (Pd/TS-1) and Pd-loaded hierarchical titanosilicalite-1 (Pd/HTS-1) with abundant mesopores (2-30 nm) inside the framework via hydrothermal method using polydiallydimethyl ammonium chloride as the non-surfactant mesopore template. XRD, N2 sorption, FT-IR, FESEM-EDX, TEM, XPS, and DR-UV techniques were used to characterize the morphological and physicochemical properties of the synthesized materials. These materials were tested as heterogeneous catalysts, along with tetrapropylammonium bromide as co-catalyst, for cycloaddition reactions of CO2 with epoxides to produce cyclic carbonates. It was found that the epoxide conversions were influenced by acidity and pore accessibility of the catalysts. Using Pd/HTS-1 facilitated bulky substrates to access active sites, resulting in higher conversions than Pd/TS-1. Over 85 % conversions were achieved for at least five consecutive cycles without significant loss in catalytic activity. The interaction between the Pd active surfaces and epichlorohydrin (ECH) was further studied by DFT calculations. The existence of Pd(200) was more influential on adsorbing epichlorohydrin (ECH) and subsequent formation of dissociated ECH (DECH) intermediate than Pd(111) surface. However, Pd(111) was dominant in enhancing the activity of DECH species for capturing CO2. Therefore, the co-existence of Pd(200) and Pd(111) surfaces was needed for cycloaddition of CO2 with ECH.

Actuating Liquid Crystals Rapidly and Reversibly by Using Chemical Catalysis

Microtubules and catalytic motor proteins underlie the microscale actuation of living materials, and they have been used in reconstituted systems to harness chemical energy to drive new states of organization of soft matter (e.g., liquid crystals (LCs)). Such materials, however, are fragile and challenging to translate to technological contexts. Rapid (sub-second) and reversible changes in the orientations of LCs at room temperature using reactions between gaseous hydrogen and oxygen that are catalyzed by Pd/Au surfaces are reported. Surface chemical analysis and computational chemistry studies confirm that dissociative adsorption of H2 on the Pd/Au films reduces preadsorbed O and generates 1 ML of adsorbed H, driving nitrile-containing LCs from a perpendicular to a planar orientation. Subsequent exposure to O2 leads to oxidation of the adsorbed H, reformation of adsorbed O on the Pd/Au surface, and a return of the LC to its initial orientation. The roles of surface composition and reaction kinetics in determining the LC dynamics are described along with a proof-of-concept demonstration of microactuation of beads. These results provide fresh ideas for utilizing chemical energy and catalysis to reversibly actuate functional LCs on the microscale.

Support Engineering for the Stabilisation of Heterogeneous Pd3 P-Based Catalysts for Heck Coupling Reactions

Herein we report the use of a supported Pd3 P catalyst for Heck coupling reactions. For the stabilisation of Pd3 P and Pd, as reference system, the silica support material was modified via phosphorus doping (0.5 and 1 wt % P). Through this so-called support engineering approach, the catalytic activity of Pd3 P was clearly enhanced. Whereas an iodobenzene conversion of 79 % was witnessed for Pd3 P@SiO2 in the coupling of styrene and iodobenzene in 1 h, 90 % conversion could be achieved using Pd3 P@1P-SiO2 . This improved catalytic activity probably stems from an electronic modulation of the support surface via the introduction of phosphorus. Simultaneously, the recyclability was boosted and the Pd3 P@1P-SiO2 catalyst has shown to maintain its catalytic activity over several recovery tests. Hereby, metal leaching could almost be suppressed completely to 3 % by the use of a P-modified silica support.

Cassia fistula galactomannan stabilized copper nanocatalyst as an efficient, recyclable heterogeneous catalyst for the fast clickable [3+2] Huisgen cycloadditions in water

In this study, we have first time investigated the synthesis of copper nanocatalyst by using biopolymer galactomannan, naturally extracted from Cassia fistula pods. The methodology involved for the preparation of copper nanocatalyst is economical, efficient, environment friendly, and did not involve further processing for stabilization or reduction of copper nanoparticles. The morphology and structural characterization of the nanocatalyst was performed by using different techniques such as FT-IR, 1H NMR, SEM, EDX, HR-TEM, XRD, XPS, ICP-MS, BET, and TGA analysis. The prepared copper nanocatalyst is applied for the click [3+2] Huisgen cycloadditions of various azides and alkynes, employing water as environmentally benign solvent. In comparison to earlier reported methods, our method requires lowest catalyst loading, less reaction time, excellent yields and have wide substrate scope. Additionally, the catalyst was easily recovered by simple filtration and recycled at least ten consecutive times without any appreciable loss of efficiency and selectivity. The effect of mannose and galactose (Man/Gal) ratio of Cassia fistula galactomannan on the catalytic activity were also investigated.

Surface-Modified Pd/CeO2 Single-Atom Catalyst Shows Increased Activity for Suzuki Cross-Coupling

Single-atom catalysts (SACs) comprise catalytically active atoms dispersed on supports; they combine the high activity and site uniformity of homogeneous catalysts with the ease of separability of heterogeneous catalysts. However, SACs lack fine control over the active site, provided by ligands in homogeneous catalysts. In this work, we demonstrate that modification of the support with an organic monolayer is a viable approach to improving the catalytic performance. The addition of catechol-type monolayers to a Pd/CeO2 SAC increases its catalytic activity for Suzuki cross-coupling, a central reaction in the synthesis of fine chemicals and pharmaceuticals. Kinetic trials reveal that the coating reduces the activation energy from 49 ± 9 to 22 ± 5 kJ/mol and produces a 4-fold rate enhancement at 25 °C, an effect we attribute to π-π interactions between the reactant and the catechol coating. Further development of this approach could vastly increase the utility of SACs in organic synthesis.

Reduced Tiara-like Palladium Complex for Suzuki Cross-Coupling Reactions

The design of highly active and structurally well-defined catalysts has become a crucial issue for heterogeneous catalysed reactions while reducing the amount of catalyst employed. Beside conventional synthetic routes, the employment of polynuclear transition metal complexes as catalysts or catalyst precursors has progressively intercepted a growing interest. These well-defined species promise to deliver catalytic systems where a strict control on the nuclearity allows to improve the catalytic performance while reducing the active phase loading. This study describes the development of a highly active and reusable palladium-based catalyst on alumina (Pd8 /Al2 O3 ) for Suzuki cross-coupling reactions. An octanuclear tiara-like palladium complex was selected as active phase precursor to give isolated Pd-clusters of ca. 1 nm in size on Al2 O3 . The catalyst was thoroughly characterised by several complementary techniques to assess its structural and chemical nature. The high specific activity of the catalyst has allowed to carry out the cross-coupling reaction in 30 min using only 0.12 mol % of Pd loading under very mild and green reaction conditions. Screening of various substrates and selectivity tests, combined with recycling and benchmarking experiments, have been used to highlight the great potentialities of this new Pd8 /Al2 O3 catalyst.

Porous Supramolecular Assemblies for Efficient Suzuki Coupling of Aryl Chlorides

The development of catalytic systems that can activate aryl chlorides for palladium-catalyzed cross-coupling reactions is at the forefront of ongoing efforts to synthesize fine chemicals. In this study, a facile ligand-template approach is adopted to achieve active-site encapsulation by forming supramolecular assemblies; this bestowed the pristine inert counterparts with reactivity, which is further increased upon the construction of a porous framework. Experimental results indicated that the isolation of ligands by the surrounding template units is key to the formation of catalytically active monoligated palladium complexes. Additionally, the construction of porous frameworks using the resulting supramolecular assemblies prevented the decomposition of the Pd complexes into nanoparticles, which drastically increased the catalyst lifetime. These findings, along with the simplicity and generality of the synthesis scheme, suggest that the strategy can be leveraged to achieve unique reactivity and potentially enable fine-chemical synthesis.

G2Retro as a two-step graph generative models for retrosynthesis prediction

Retrosynthesis is a procedure where a target molecule is transformed into potential reactants and thus the synthesis routes can be identified. Recently, computational approaches have been developed to accelerate the design of synthesis routes. In this paper,we develop a generative framework G²Retro for one-step retrosynthesis prediction. G²Retro imitates the reversed logic of synthetic reactions. It first predicts the reaction centers in the target molecules (products), identifies the synthons needed to assemble the products, and transforms these synthons into reactants. G²Retro defines a comprehensive set of reaction center types, and learns from the molecular graphs of the products to predict potential reaction centers. To complete synthons into reactants, G²Retro considers all the involved synthon structures and the product structures to identify the optimal completion paths, and accordingly attaches small substructures sequentially to the synthons. Here we show that G²Retro is able to better predict the reactants for given products in the benchmark dataset than the state-of-the-art methods.

Chemoselective α-Alkylation of Nitriles with Primary Alcohols by Manganese(I)-Catalysis

A sustainable and easy-to-use protocol for the alkylation of aryl nitriles with the earth-abundant manganese(I) catalyst is presented. The alkylation reaction employs readily available nitriles and naturally abundant alcohols as the coupling partners. The reaction proceeds chemoselectively and encompasses a broad substrate scope with good to excellent yields. The catalytic reaction yields selectively α-branched nitriles and water as the sole byproduct. Experimental studies were executed to understand the mechanism of the catalytic reaction.

Pd nanoparticles decorated on Schiff base-modified chitosan/CeO2 as a heterogeneous and retriable nanocatalyst for Heck reactions and remediation of environmental pollutants

In this paper, we have developed a novel, highly active, eco-friendly, and versatile heterogeneous catalyst system in which Pd nanoparticles are decorated on Schiff base-modified chitosan‑cerium oxide particles (Pd@CS-CeO₂). In order to confirm the successful fabrication of Pd@CS-CeO₂, FTIR, XRD, SEM, TEM, BET, TG/DTG, and EDS analyses were performed, and its performance was evaluated as a heterogeneous nanocatalyst in Heck coupling reaction and reduction of nitro compounds. The catalytic tests showed that the desired Heck products were readily produced by Pd@CS-CeO₂ without being contaminated with the aryl iodides, bromides, and chlorides. Moreover, different nitro compounds were efficiently reduced to corresponding amino compounds by Pd@CS-CeO₂ within 95-160 s. Thanks to the heterogeneous nature of Pd@CS-CeO₂ catalyst, it was easily recovered via simple filtration and reused up to 5 successive runs by giving 88 % yield. Due to its good catalytic and reusability performance together with stability/durability, Pd@CS-CeO₂ is promising candidate as a catalyst for various catalytic or organic reactions.

Plate-Like Colloidal Metal Nanoparticles

The pseudo-two-dimensional (2D) morphology of plate-like metal nanoparticles makes them one of the most anisotropic, mechanistically understood, and tunable structures available. Although well-known for their superior plasmonic properties, recent progress in the 2D growth of various other materials has led to an increasingly diverse family of plate-like metal nanoparticles, giving rise to numerous appealing properties and applications. In this review, we summarize recent progress on the solution-phase growth of colloidal plate-like metal nanoparticles, including plasmonic and other metals, with an emphasis on mechanistic insights for different synthetic strategies, the crystallographic habits of different metals, and the use of nanoplates as scaffolds for the synthesis of other derivative structures. We additionally highlight representative self-assembly techniques and provide a brief overview on the attractive properties and unique versatility benefiting from the 2D morphology. Finally, we share our opinions on the existing challenges and future perspectives for plate-like metal nanomaterials.

Electro- and photoactivation of silver-iron oxide particles as magnetically recyclable catalysts for cross-coupling reactions

Colloidal Ag particles decorated with Fe3O4 islands can be electrochemically or photochemically activated as inverse catalysts for C(sp2)-H heteroarylation. The silver-iron oxide (SIO) particles are reduced into redox-active forms by cathodic charging at mild potentials or by short-term light exposure, and can be reused multiple times by magnetic cycling without further activation. A negative shift in the reduction peak is attributed to an overpotential produced by surface Fe3O4 which separates residual Ag ions or clusters from bulk silver. The catalytic efficiency of SIO is maintained even with acid degradation, which can be countered simply by adding water to the reaction medium.

Nickel-palladium bimetallic nanoparticles supported on multi-walled carbon nanotubes; versatile catalyst for Sonogashira cross-coupling reactions

We have developed an efficient method to generate highly active nickel-palladium bimetallic nanoparticles supported on multi-walled carbon nanotubes (Ni-Pd/MWCNTs) by dry mixing of the nickel and palladium salts utilizing the mechanical energy of a ball-mill. These nanoparticles were successfully employed in Sonogashira cross-coupling reactions with a wide array of functionalized aryl halides and terminal alkynes under ligand and copper free conditions using a Monowave 50 heating reactor. Notably, the concentration of palladium can be lowered to a minimum amount of 0.81% and replaced by more abundant and less expensive nickel nanoparticles while effectively catalyzing the reaction. The remarkable reactivity of the Ni-Pd/MWCNTs catalyst toward Sonogashira cross-coupling reactions is attributed to the high degree of the dispersion of Ni-Pd nanoparticles with small particle size of 5-10 nm due to an efficient grinding method. The catalyst was easily removed from the reaction mixture by centrifugation and reused several times with minimal loss of catalytic activity. Furthermore, the concentration of catalyst in Sonogashira reactions can be reduced to a minimum amount of 0.01 mol% while still providing a high conversion of the Sonogashira product with a remarkable turnover number (TON) of 7200 and turnover frequency (TOF) of 21 600 h^-1. The catalyst was fully characterized by a variety of spectroscopic techniques including X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS).

A Novel Insight into the Ullmann Homocoupling Reactions Performed in Heterogeneous Catalytic Systems

The Ullmann reaction has been reported to be the first cross-coupling reaction performed by using a transition metal catalyst. This reaction has been initially considered as the copper-catalyzed homocoupling of aryl halides, leading to the formation of symmetrical biaryl compounds via the generation of novel C-C bonds. Although this reaction has been extensively studied in recent decades and valuable results have been achieved, there are still considerable efforts focused on the development of novel catalytic systems, mild reaction conditions, and extended substrate scope. The mechanistic aspects of the Ullmann homocoupling reaction have also been investigated, as related to the introduction of new sustainable strategies and green procedures. The application of recyclable heterogeneous catalysts has been found to overcome most of the limitations associated with the harsh reaction conditions of the original Ullmann reaction. More recently, copper-based catalytic systems have also been replaced by palladium nanoparticles, ionic palladium species, gold nanoparticles, and palladium-gold bimetallic systems. In this review, current results reported on the Ullmann homocoupling reaction are discussed, with an emphasis on the development of novel catalytic systems, which can be efficiently used under heterogeneous conditions.

The role of a redox-active non-innocent ligand in additive-free C-C Glaser-Hay and Suzuki coupling reactions by an o-aminophenol palladium(ii) complex

A novel mononuclear palladium complex with 2-(3,5-di-tert-butyl-2-hydroxyphenyl amino) benzonitrile as a non-innocent ligand (abbreviated as Pd^IIL₂ ^NIS) was synthesized, and characterized by IR, UV-Vis, ¹H and ¹³C NMR spectroscopies and elemental analysis. The crystal structure clearly showed that the metal center was in a square planar environment. The bond lengths obtained from X-ray structure analysis revealed that both ligands are in the o-iminobenzosemiquinone radical form. The neutral complex showed strong absorptions in the NIR region, corresponding to the ILCT (intra-ligand charge transfer). Catalytic tests performed for the coupling reaction of terminal alkynes showed that the palladium Pd^IIL₂ ^NIS complex acts as a highly effective catalyst for the base-free C-C coupling reactions, leading to diyne derivatives with excellent yields. The Pd^IIL₂ ^NIS complex in ethanol, as a green solvent, is demonstrated to be an exceptionally active phosphine-free catalyst for the Suzuki reaction of aryl iodides and bromides. The reaction can be carried out under mild conditions (room temperature) with high yields without using a microwave or phosphine ligands. This catalyst exhibits an interesting application of redox non-innocent ligands, the electron reservoir behavior, which makes it needless to use additional reagents. The theoretical calculation provides more details about the complex structure, molecular orbitals, and electronic state.

Base-Controlled Palladium-Catalyzed Intramolecular 'One Substrate - Five Reactions' of 5-Benzyl-1-(2-halobenzyl)-2-phenyl-1H-pyrazol-3(2H)-ones

Achieving site-selectivity and chemoselectivity is enormously challenging for substrates with multi-reactive sites in organic reactions. One kind of model substrates, 5-benzyl-1-(2-halobenzyl)-2-phenyl-1H-pyrazol-3(2H)-ones with six reactive sites were chosen as the examples to probe their intramolecular four kinds of five reactions including C(sp³ )-H arylation, C(sp² )-H arylation, reductive Heck reaction, and domino Heck reaction/alkylation of aryl C(sp² )-H bonds through variation of the reaction conditions. Screening of the reaction conditions showed that the different bases controlled the palladium-catalyzed intramolecular site-selectivity and chemoselectivity of the substrates: (i) Cesium carbonate (Cs₂ CO₃ ) promoted the benzyl C(sp³ )-H arylation of the substrates providing dihydropyrazolo[1,5-b]isoquinolin-2(1H)-ones at 100 °C, and isomerization of the dihydropyrazolo[1,5-b]isoquinolin-2(1H)-ones gave isoquinoline derivatives at a higher temperature (140 °C); (ii) Sodium acetate (NaOAc) mediated the aryl C(sp² )-H arylation of the substrates affording seven-membered biphenyl N-heterocycles; (iii) Sodium dichloroacetate (Cl₂ HCCO₂ Na) facilitated occurrence of the reductive Heck reaction of the substrates affording 1H-pyrazolo[5,1-a]isoindol-2(8H)-ones; (iv) Sodium trifluoroacetate (F₃ CCO₂ Na) assisted performance of the domino Heck reaction/aryl C(sp² )-H alkylation of the substrates leading to the spiro heterocycles. The 'one substrate - multiple reactions - multiple products' strategy greatly reduces cost, increases diversity of products, provides more opportunity for screening of pharmaceutical molecules, and enriches modern organic synthetic chemistry.

Heterogenized Phenanthroline-Pd(2+)-Catalyzed Alkoxycarbonylation of Aryl Iodides in Base-Free Conditions

A phenanthroline-based porous organic polymer-supported heterogeneous Pd catalyst (Pd@Phen-POP) is facilely synthesized by the solvent knitting of a Phen scaffold via the Lewis-acid-catalyzed Friedel-Crafts reaction using dichloromethane as a source for linker in the presence of AlCl₃. The catalyst very effectively catalyzes the alkoxycarbonylation of various substituted aryl iodides with various alcohols to give corresponding products in good to excellent yields. Owing to the heterotic nature of the catalyst, it can be easily separated by simple filtration from the reaction mixture and recycled.

Chitosan-Cu Catalyzed Novel Ferrocenated Spiropyrrolidines: Green Synthesis, Single Crystal X-ray Diffraction, Hirshfeld Surface and Antibacterial Studies

Chitosan-bounded copper (chitosan-Cu) was introduced for green synthesis of novel ferrocenated spiropyrrolidine hybrids, namely 3'-(4-.bromobenzoyl)-5'-(4-hydroxybenzyl)-4'-ferrocenylspiro[indoline-3,2'-pyrrolidin]-2-one and 3'-(4-bromobenzoyl)-4'-ferrocenylspiro[indoline-3,2'-pyrrolidin]-2-one, in good yield. A one-pot three-component 1,3-dipolar cycloaddition reaction was employed for the formation of spiropyrrolidines from 1-(4-bromophenyl)-ferrocene-prop-2-en-1-one and azomethine ylides, which were developed in situ from tyrosine, glycine, and isatin, respectively. Various spectroscopic methods were used to establish the structures of spiropyrrolidines, and a single crystal X-ray diffraction study of a spiropyrrolidine provided additional confirmation. The crystallographic study revealed that compound 3a has one independent molecule in its unit cell, which is correlated with Hirshfeld surface analysis, and describes intramolecular contacts adversely. The highly yielded products in green conditions were determined for their antibacterial significance and were found to have good activity against Gram-positive and Gram-negative bacterial strains.

Multi-Compartmentalized Cellulose Macrobead Catalysts for In Situ Organic Reaction in Aqueous Media

This study reports a promising approach to fabricate bacterial cellulose (BC)-based macrobead catalysts with improved catalytic activities and recyclability for organic reactions in aqueous media. To this end, the consecutive extrusion and gelation of BC precursor fluids is conducted using a combined micronozzle device to compartmentalize the resulting BC macrobeads in a programmed manner. The use of BCs laden with Au and Pd nanoparticles (NPs), and Fe₃ O₄ NPs led to the production of catalytically and magnetically compartmentalized BC macrobeads, respectively. Through the model reduction reaction of 4-nitrophenol to 4-aminophenol using NaBH₄ , it is finally demonstrated that the BC macrobead catalysts not only enhance catalytic activities while exhibiting high reaction yields (>99%) in aqueous media, but also repeatedly retrieve the products with ease in response to the applied magnetic field, enabling the establishment of a useful green catalyst platform.

Development of a P450 Fusion Enzyme for Biaryl Coupling in Yeast

Despite the diverse and potent bioactivities displayed by axially chiral biaryl natural products, their application in drug discovery is limited by restricted access to these complex molecular scaffolds. In particular, fundamental challenges remain in controlling the site- and atroposelectivity in biaryl coupling reactions. In contrast, Nature has a wealth of biosynthetic enzymes that catalyze biaryl coupling reactions with catalyst-controlled selectivity. In particular, a growing subset of fungal P450s have been identified to catalyze site- and atroposelective biaryl couplings. Herein, we optimize a whole-cell biocatalytic platform in Pichia pastoris to synthesize biaryl molecules through the recombinant production of the fungal P450 KtnC. Moreover, engineering redox self-sufficient fusion enzymes further improves the efficiency of the system. Altogether, this work provides a platform for biaryl coupling reactions in yeast that can be applied to engineering a currently underexplored pool of fungal P450s into selective biocatalysts for the synthesis of complex biaryl compounds.

Catalysis of Alloys: Classification, Principles, and Design for a Variety of Materials and Reactions

Alloying has long been used as a promising methodology to improve the catalytic performance of metallic materials. In recent years, the field of alloy catalysis has made remarkable progress with the emergence of a variety of novel alloy materials and their functions. Therefore, a comprehensive disciplinary framework for catalytic chemistry of alloys that provides a cross-sectional understanding of the broad research field is in high demand. In this review, we provide a comprehensive classification of various alloy materials based on metallurgy, thermodynamics, and inorganic chemistry and summarize the roles of alloying in catalysis and its principles with a brief introduction of the historical background of this research field. Furthermore, we explain how each type of alloy can be used as a catalyst material and how to design a functional catalyst for the target reaction by introducing representative case studies. This review includes two approaches, namely, from materials and reactions, to provide a better understanding of the catalytic chemistry of alloys. Our review offers a perspective on this research field and can be used encyclopedically according to the readers' individual interests.

Transition Metal Catalyzed Hiyama Cross-Coupling: Recent Methodology Developments and Synthetic Applications

Hiyama cross-coupling is a versatile reaction in synthetic organic chemistry for the construction of carbon-carbon bonds. It involves the coupling of organosilicons with organic halides using transition metal catalysts in good yields and high enantioselectivities. In recent years, hectic progress has been made by researchers toward the synthesis of diversified natural products and pharmaceutical drugs using the Hiyama coupling reaction. This review emphasizes the recent synthetic developments and applications of Hiyama cross-coupling.

A Streptomyces P450 enzyme dimerizes isoflavones from plants

Dimerization is a widespread natural strategy that enables rapid structural diversification of natural products. However, our understanding of the dimerization enzymes involved in this biotransformation is still limited compared to the numerous reported dimeric natural products. Here, we report the characterization of three new isoflavone dimers from Streptomyces cattleya cultured on an isoflavone-containing agar plate. We further identified a cytochrome P450 monooxygenase, CYP158C1, which is able to catalyze the dimerization of isoflavones. CYP158C1 can also dimerize plant-derived polyketides, such as flavonoids and stilbenes. Our work represents a unique bacterial P450 that can dimerize plant polyphenols, which extends the insights into P450-mediated biaryl coupling reactions in biosynthesis.

Noncovalent Assembly and Catalytic Activity of Hybrid Materials Based on Pd Complexes Adsorbed on Multiwalled Carbon Nanotubes, Graphene, and Graphene Nanoplatelets

Green catalysts with excellent performance in Cu-free Sonogashira coupling reactions can be prepared by the supramolecular decoration of graphene surfaces with Pd(II) complexes. Here we report the synthesis, characterization, and catalytic properties of new catalysts obtained by the surface decoration of multiwalled carbon nanotubes (MWCNTs), graphene (G), and graphene nanoplatelets (GNPTs) with Pd(II) complexes of tetraaza-macrocyclic ligands bearing one or two anchor functionalities. The decoration of these carbon surfaces takes place under environmentally friendly conditions (water, room temperature, aerobic) in two steps: (i) π–π stacking attachment of the ligand via electron-poor anchor group 6-amino-3,4-dihydro-3-methyl-5-nitroso-4-oxo-pyrimidine and (ii) Pd(II) coordination from PdCl₄^2–. Ligands are more efficiently adsorbed on the flat surfaces of G and GNPTs than on the curved surfaces of MWCNTs. All catalysts work very efficiently under mild conditions (50 °C, aerobic, 7 h), giving a similar high yield (90% or greater) in the coupling of iodobenzene with phenylacetylene to form diphenylacetylene in one catalytic cycle, but catalysts based on G and GNPTs (especially on GNPTs) provide greater catalytic efficiency in reuse (four cycles). The study also revealed that the active centers of the ligand-Pd type decorating the support surfaces are much more efficient than the Pd(0) and PdCl₄^2– centers sharing the same surfaces. All of the results allow a better understanding of the structural factors to be controlled in order to obtain an optimal efficiency from similar catalysts based on graphene supports.

Green catalysts with high efficiency in the Cu-free Sonogashira C−C coupling reactions can be prepared by the supramolecular functionalization of carbon materials.

Engineered Cytochrome P450-Catalyzed Oxidative Biaryl Coupling Reaction Provides a Scalable Entry into Arylomycin Antibiotics

We report herein the first example of a cytochrome P450-catalyzed oxidative carbon-carbon coupling process for a scalable entry into arylomycin antibiotic cores. Starting from wild-type hydroxylating cytochrome P450 enzymes and engineered Escherichia coli, a combination of enzyme engineering, random mutagenesis, and optimization of reaction conditions generated a P450 variant that affords the desired arylomycin core 2d in 84% assay yield. Furthermore, this process was demonstrated as a viable route for the production of the arylomycin antibiotic core on the gram scale. Finally, this new entry affords a viable, scalable, and practical route for the synthesis of novel Gram-negative antibiotics.