Photoelectrochemical DNA Biosensors

Three-dimensional polymer phenylethnylcopper/nitrogen doped graphene aerogel electrode coupled with Fe3O4 NPs nanozyme: Toward sensitive and robust photoelectrochemical detection of glyphosate in agricultural matrix

BACKGROUND

Presently, glyphosate (Gly) is the most extensively used herbicide globally, Nevertheless, its excessive usage has increased its accumulation in off-target locations, and aroused concerns for food and environmental safety. Commonly used detection methods, such as high-performance liquid chromatography and gas chromatography, have limitations due to expensive instruments, complex pre-processing steps, and inadequate sensitivity. Therefore, a facile, sensitive, and reliable Gly detection method should be developed.

RESULTS

A photoelectrochemical (PEC) sensor consisting of a three-dimensional polymer phenylethnylcopper/nitrogen-doped graphene aerogel (PPhECu/3DNGA) electrode coupled with Fe3O4 NPs nanozyme was constructed for sensitive detection of Gly. The microscopic 3D network of electrodes offered fast transfer routes for photo-generated electrons and a large surface area for nanozyme loading, allowing high signal output and analytical sensitivity. Furthermore, the use of peroxidase-mimicking Fe3O4 NPs instead of natural enzyme improved the stability of the sensor against ambient temperature changes. Based on the inhibitory effect of Gly on the catalytic activity Fe3O4 NPs, the protocol achieved Gly detection in the range of 5 × 10-10 to 1 × 10-4 mol L-1. Additionally, feasibility of the detection was confirmed in real agricultural matrix including tea, maize seedlings, maize seeds and soil.

SIGNIFICANCE

This work achieved facile, sensitive and reliable analysis towards Gly, and it was expected to inspire the design and utilization of 3D architectures in monitoring agricultural chemicals in food and environmental matrix.

High-Throughput Multitarget Molecular Detection in an Automatic Light-Addressable Photoelectrochemical Sensing Platform

Successively emerged high-throughput multitarget molecular detection methods bring significant development tides in chemical, biological, and environmental fields. However, several persistent challenges of intricate sample preparation, expensive instruments, and tedious and skilled operations still need to be further addressed. Here, we propose an automatic light-addressable photoelectrochemical (ALA-PEC) sensing platform for sensitive and selective detection of multitarget molecules. With Au nanoparticle-decorated TiO2 nanotube photonic crystals (Au-TiO2 NTPCs) as a photoelectrode and 8 kinds of antibiotics as target molecules, the ALA-PEC sensing system implements automatic detection of multimolecules in a short time with high sensitivity and good selectivity. Random samples with different amounts of antibiotics have been well-distinguished in the ALA-PEC system, and both the chemical components and concentrations have been well-illustrated in a pattern recognition model. It is worth noting that 8 samples are not the limit of the ALA-PEC sensing platform, which can be easily expanded to more complex detection arrays based on practical needs. The emerging ALA-PEC sensing platform provides a new solution for rapid screening and detection of multitarget and high-throughput substances and potentially brings the automatic, portable, sensitive, high-throughput, and cost-effective detection technique to an entire new realm.

Versatile Metal-Organic Framework Incorporating Ag2S for Constructing a Photoelectrochemical Immunosensor for Two Breast Cancer Markers

Breast cancer poses the significance of early diagnosis and treatment. Here, we developed an innovative photoelectrochemical (PEC) immunosensor characterized by high-level dual photocurrent signals and exceptional sensitivity. The PEC sensor, denoted as MIL&Ag2S, was constructed by incorporating Ag2S into a metal-organic framework of MIL-101(Cr). This composite not only enhanced electron-hole separation and conductivity but also yielded robust and stable dual photocurrent signals. Through the implementation of signal switching, we achieved the combined detection of cancer antigen 15-3 (CA15-3) and carcinoembryonic antigen (CEA) with outstanding stability, reproducibility, and specificity. The results revealed a linear range for CEA detection spanning 0.01-32 ng/mL, with a remarkably low detection limit of 0.0023 ng/mL. Similarly, for CA15-3 detection, the linear range extended from 0.1 to 320 U/mL, with a low detection limit of 0.014 U/mL. The proposed strategy introduces new avenues for the development of highly efficient, cost-effective, and user-friendly PEC sensors. Furthermore, it holds promising prospects for early clinical diagnosis, contributing to potential breakthroughs in medical detection and ultimately improving patient outcomes.

Dual Engine Boosts Organic Photoelectrochemical Transistor for Enhanced Modulation and Bioanalysis

Organic photoelectrochemical transistor (OPECT) has shown substantial potential in the development of next-generation bioanalysis yet is limited by the either-or situation between the photoelectrode types and the channel types. Inspired by the dual-photoelectrode systems, we propose a new architecture of dual-engine OPECT for enhanced signal modulation and its biosensing application. Exemplified by incorporating the CdS/Bi2S3 photoanode and Cu2O photocathode within the gate-source circuit of Ag/AgCl-gated poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) channel, the device shows enhanced modulation capability and larger transconductance (gm) against the single-photoelectrode ones. Moreover, the light irritation upon the device effectively shifts the peak value of gm to zero gate voltage without degradation and generates larger current steps that are advantageous for the sensitive bioanalysis. Based on the as-developed dual-photoelectrode OPECT, target-mediated recycling and etching reactions are designed upon the CdS/Bi2S3, which could result in dual signal amplification and realize the sensitive microRNA-155 biodetection with a linear range from 1 fM to 100 pM and a lower detection limit of 0.12 fM.

Self-powered photoelectrochemical immunosensing platform for sensitive CEA detection using dual-photoelectrode synergistic signal amplification

Self-powered photoelectrochemical (PEC) sensing, as an emerging sensing mode, can effectively solve the problems such as weak anti-interference ability and poor signal response of individual photoanode or photocathode sensing. In this work, an ITO/Co-CuInS2 photocathode and ITO/WO3@CdS photoanode based self-powered cathodic PEC immunosensor was developed, which integrated dual-photoelectrode to synergistic amplify the signal for highly sensitive and specific detection of carcinoembryonic antigen (CEA). The self-powered PEC sensor could drive electrons transfer through the difference in Fermi levels between the two photoelectrodes without an external bias voltage. The photoanode was introduced to amplify the photoelectric signal, and the photocathode was only designed for the construction of sensing interfaces. The proposed sensor quantitatively determined the target CEA with the detection limit of 0.23 pg/mL and a linear correlation confine of 0.1 pg/mL ∼100 ng/mL. The constructed immunosensing platform exhibited high sensitivity, satisfactory stability and great biological detection selectivity, providing a feasible and effective strategy for the manufacture of new self-powered sensors in high-performance PEC bioanalytical applications.

A label-free and immobilization-free approach for constructing photoelectrochemical nucleic acid sensors utilizing DNA-silver nanoparticle affinity interactions

Efficient and affordable nucleic acid detection methods play a pivotal role in various applications. Herein, we developed an immobilization-free and label-free strategy to construct a photoelectrochemical nucleic acid biosensing platform based on interactions between silver nanoparticles and DNA. First, CRISPR-Cas12a exhibited a trans-cleavage effect on adenine nucleotide sequences upon recognizing the target DNA. The resulting adenine nucleotide sequences of varying lengths then engaged in interactions with silver nanoparticles, leading to a solution characterized by distinct light transmittance. Subsequently, the solution was positioned between the light source and the photoelectrode, strategically impacting the photon absorption step within the photoelectrochemical process. Consequently, the detection of nucleic acid was accomplished through the analysis of the resultant photocurrent signal. The developed platform exhibits a detection limit of 0.06 nM (S/N = 3) with commendable selectivity. The innovative use of adenine nucleotide sequences as cost-effective probes interacting with silver nanoparticles eliminates the need for complex interfacial immobilization processes, significantly simplifying the fabrication of DNA sensors. The outcomes of our research present a promising pathway for advancing the development of economically feasible miniature DNA sensors.

Aggregation-Enabled Electrochemistry in Confined Nanopore Capable of Complementary Faradaic and Non-Faradaic Detection

Electrochemistry that empowers innovative nanoscopic analysis has long been pursued. Here, the concept of aggregation-enabled electrochemistry (AEE) in a confined nanopore is proposed and devised by reactive oxygen species (ROS)-responsive aggregation of CdS quantum dots (QDs) within a functional nanopipette. Complementary Faradaic and non-Faradaic operations of the CdS QDs aggregate could be conducted to simultaneously induce the signal-on of the photocurrents and the signal-off of the ionic signals. Such a rationale permits the cross-checking of the mutually corroborated signals and thus delivers more reliable results for single-cell ROS analysis. Combined with the rich biomatter-light interplay, the concept of AEE can be extended to other stimuli-responsive aggregations for electrochemical innovations.

Light-harvesting iridium (III) complex-sensitized NiO photocathode for photoelectrochemical bioanalysis

A novel iridium (III) complex bearing boron dipyrromethene (Bodipy) as the light-harvesting antenna has been synthesized and is firstly employed as photosensitizer to assemble a dye-sensitized NiO photocathode. The assembled photocathode exhibits significantly improved photoelectrochemical (PEC) performance. Integrating the prepared photocathode with hybridization chain reaction (HCR)--based signal amplification strategy, a cathodic PEC biosensor is proposed for the detection of microRNA-133a (miRNA-133a). In the presence of the target, HCR is triggered to form long duplex concatamers on the photocathode, which allows numerous manganese porphyrins (MnPP) to bind in the dsDNA groove. With the help of H2O2, MnPP with peroxidase-like activity catalyzes 4--chloro-1-naphthol (4-CN) to produce benzo--4--chlorohexadienone (4-CD) precipitate on the electrode, leading to a significant decrease of photocurrent signal. The decreased photocurrent correlates linearly with the target concentration from 0.1 fM to 1 nM with a detection limit of 66.2 aM (S/N = 3). The proposed PEC strategy exhibits delightful selectivity, reproducibility and stability.

Photoelectrochemical detection of copper ions based on a covalent organic framework with tunable properties

Copper ions (Cu2+) play an essential role in various cellular functions, including respiration, nerve conduction, tissue maturation, oxidative stress defense, and iron metabolism. Covalent organic frameworks (COFs) are a class of porous crystalline materials with directed structural designability and high stability due to the combination of different monomers through covalent bonds. In this study, we synthesized a porphyrin-tetrathiazole COF (TT-COF(Zn)) with Zn-porphyrin and tetrathiafulvalene (TTF) as monomers and used it as a photoactive material. The strong light absorption of metalloporphyrin and the electron-rich properties of supplied TTF contribute to its photoelectrochemical performance. Additionally, the sulfur (S) in the TTF can coordinate with Cu2+. Based on these properties, we constructed a highly sensitive photoelectrochemical sensor for detecting Cu2+. The sensor exhibited a linear range from 0.5 nM to 500 nM (R2 = 0.9983) and a detection limit of 0.15 nM for Cu2+. Notably, the sensor performed well when detecting Cu2+ in water samples.

Application of CRISPR/Cas13a-based biosensors in serum marker detection

The detection of serum markers is important for the early diagnosis and monitoring of diseases, but conventional detection methods have the problem of low specificity or sensitivity. CRISPR/Cas13a-based biosensors have the characteristics of simple detection methods and high sensitivity, which have a certain potential to solve the problems of conventional detection. This paper focuses on the research progress of CRISPR/Cas13a-based biosensors in serum marker detection, introduces the principles and applications of fluorescence, electrochemistry, colorimetric, and other biosensors based on CRISPR/Cas13a in the detection of serum markers, compares and analyzes the differences between the above CRISPR/Cas13a-based biosensors, and looks forward to the future development direction of CRISPR/Cas13a-based biosensors.

Reticular Heterojunction for Organic Photoelectrochemical Transistor Detection of Neuron-Specific Enolase

Reticular heterojunctions on the basis of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) have sparked considerable interest in recent research endeavors, which nevertheless have seldom been studied in optoelectronic biosensing. In this work, its utilization for organic photoelectrochemical transistor (OPECT) detection of the important cancer biomarker of neuron-specific enolase (NSE) is reported. A MOF@COF@CdS quantum dots (QDs) heterojunction is rationally designed to serve as the photogating module against the polymeric channel. Linking with a sandwich complexing event, target-dependent alternation of the photogate is achieved, leading to the changed photoelectric conversion efficiency as indicated by the amplified OPECT signals. The proposed assay demonstrates good analytical performance in detecting NSE, featuring a linear detection range from 0.1 pg mL-1 to 100 ng mL-1 , with a detection limit of 0.033 pg mL-1 .

PEI-based functional materials: Fabrication techniques, properties, and biomedical applications

Cationic polymers have recently attracted considerable interest as research breakthroughs for various industrial and biomedical applications. They are particularly interesting due to their highly positive charges, acceptable physicochemical properties, and ability to undergo further modifications, making them attractive candidates for biomedical applications. Polyethyleneimines (PEIs), as the most extensively utilized polymers, are one of the valuable and prominent classes of polycations. Owing to their flexible polymeric chains, broad molecular weight (MW) distribution, and repetitive structural units, their customization for functional composites is more feasible. The specific beneficial attributes of PEIs could be introduced by purposeful functionalization or modification, long service life, biocompatibility, and distinct geometry. Therefore, PEIs have significant potential in biotechnology, medicine, and bioscience. In this review, we present the advances in PEI-based nanomaterials, their transfection efficiency, and their toxicity over the past few years. Furthermore, the potential and suitability of PEIs for various applications are highlighted and discussed in detail. This review aims to inspire readers to investigate innovative approaches for the design and development of next-generation PEI-based nanomaterials possessing cutting-edge functionalities and appealing characteristics.

MXene-Based Chemo-Sensors and Other Sensing Devices

MXenes have received worldwide attention across various scientific and technological fields since the first report of the synthesis of Ti3C2 nanostructures in 2011. The unique characteristics of MXenes, such as superior mechanical strength and flexibility, liquid-phase processability, tunable surface functionality, high electrical conductivity, and the ability to customize their properties, have led to the widespread development and exploration of their applications in energy storage, electronics, biomedicine, catalysis, and environmental technologies. The significant growth in publications related to MXenes over the past decade highlights the extensive research interest in this material. One area that has a great potential for improvement through the integration of MXenes is sensor design. Strain sensors, temperature sensors, pressure sensors, biosensors (both optical and electrochemical), gas sensors, and environmental pollution sensors targeted at volatile organic compounds (VOCs) could all gain numerous improvements from the inclusion of MXenes. This report delves into the current research landscape, exploring the advancements in MXene-based chemo-sensor technologies and examining potential future applications across diverse sensor types.

Highly Light-Harvesting MOF-on-MOF Heterostructure: Cascading Functionality to Flexible Photogating of Organic Photoelectrochemical Transistor and Bienzyme Cascade Detection

Recently, organic photoelectrochemical transistor (OPECT) bioanalysis has become a prominent technique for the high-performance detection of biomolecules. However, as a sensitive index of the OPECT, the dynamic regulation transconductance (gm) is still severely deficient. Herein, this work reports a new photosensitive metal-organic framework (MOF-on-MOF) heterostructure for the effective modulation of maximum gm and natural bienzyme interfacing toward choline detection. Specifically, the bidentate ligand MOF (b-MOF) was assembled onto the UiO-66 MOF (u-MOF) by a modular assembly method, which could facilitate the charge separation and generate enhanced photocurrents and offer a biophilic environment for the immobilization of choline oxidase (ChOx) and horseradish peroxidase (HRP) through hydrogen-bonded bridges. The transconductance of the OPECT could be flexibly altered by increased light intensity to maximal value at zero gate bias, and sensitive choline detection was achieved with a detection limit of 0.2 μM. This work reveals the potential of MOF-on-MOF heterostructures for futuristic optobioelectronics.

Iontronic Photoelectrochemical Biorecognition Probing

Herein, the first iontronic photoelectrochemical (PEC) biorecognition probing is devised by rational engineering of a dual-functional bioconjugate, i.e., a light-sensitive intercalated structural DNA, as a smart gating module confined within a nanotip, which could respond to both the incident light and biotargets of interest. Light stimulation of the bioconjugate could intensify the negative charge at the nano-orifice to sustain enhanced ionic current. The presence of proteins (e.g., acetylcholinesterase, AChE) or nucleic acids (e.g., microRNA (miR)-10b) could lead to bioconjugate release with altered ionic signaling. The practical applicability of the methodology is confirmed by AChE detection in human serum and miR-10b detection in single cells.

Photoresponsive Hydrogen-Bonded Organic Frameworks-Enabled Organic Photoelectrochemical Transistors for Sensitive Bioanalysis

A facile route for exponential magnification of transconductance (gm) in an organic photoelectrochemical transistor (OPECT) is still lacking. Herein, photoresponsive hydrogen-bonded organic frameworks (PR-HOFs) have been shown to be efficient for gm magnification in a typical poly(ethylene dioxythiophene):poly(styrenesulfonate) OPECT. Specifically, 450 nm light stimulation of 1,3,6,8-tetrakis (p-benzoic acid) pyrene (H4TBAPy)-based HOF could efficiently modulate the device characteristics, leading to the considerable gm magnification over 78 times from 0.114 to 8.96 mS at zero Vg. In linkage with a DNA nanomachine-assisted steric hindrance amplification strategy, the system was then interfaced with the microRNA-triggered structural DNA evolution toward the sensitive detection of a model target microRNA down to 0.1 fM. This study first reveals HOFs-enabled efficient gm magnification in organic electronics and its application for sensitive biomolecular detection.

S-induced Phase Change Forming In2 O3 /In2 S3 Heterostructure for Photoelectrochemical Glucose Sensor

In the past several decades, Photoelectrochemical (PEC) sensing still remains a great challenge to design highly-efficient semiconductor photocatalysts via a facile method. It is of much importance to design and synthesize various novel nanostructured sensing materials for further improving the response performance. Herein, we present an In2 O3 /In2 S3 heterostructure obtained by combining microwave assisted hydrothermal method with S-induced phase change, whose energy band and electronic structure could be adjusted by changing the S content. Combining theoretical calculation and spectroscopic techniques, the introduction of sulfur was proved to produce multifunctional interfaces, inducing the change of phase, oxygen vacancies and band gap, which accelerates the separation of photoexcited carriers and reduces their recombination, improving the electronic injection efficiency around the interface of In2 O3 /In2 S3 . As anticipated, an enhanced glucose response performance with a photocurrent of 0.6 mA cm-2 , a linear range of 0.1-1 mM and a detection limit as low as 14.5 μM has been achieved based on the In2 O3 /In2 S3 heterostructure, which is significant superior over its pure In2 O3 and S-doped In2 O3 counterparts. This efficient interfacial strategy may open a new route to manipulate the electrical structure, and energy band structure regulation of sensing material to improve the performance of photoelectrodes for PEC.

Upconversion-Powered Photoelectrochemical Bioanalysis for DNA Sensing

In this work, we report a new concept of upconversion-powered photoelectrochemical (PEC) bioanalysis. The proof-of-concept involves a PEC bionanosystem comprising a NaYF4:Yb,Tm@NaYF4 upconversion nanoparticles (UCNPs) reporter, which is confined by DNA hybridization on a CdS quantum dots (QDs)/indium tin oxide (ITO) photoelectrode. The CdS QD-modified ITO electrode was powered by upconversion absorption together with energy transfer effect through UCNPs for a stable photocurrent generation. By measuring the photocurrent change, the target DNA could be detected in a specific and sensitive way with a wide linear range from 10 pM to 1 μM and a low detection limit of 0.1 pM. This work exploited the use of UCNPs as signal reporters and realized upconversion-powered PEC bioanalysis. Given the diversity of UCNPs, we believe it will offer a new perspective for the development of advanced upconversion-powered PEC bioanalysis.

A responsive organic probe based photoelectrochemical sensor for hydrazine detection

This study developed a new photoelectrochemical (PEC) sensor for the detection of the hydrazine (N2H4, HZ) based on a donor-π-bridge-acceptor (D-π-A) configuration organic photoactive dye (Dye-HZ). The dye was covalently immobilized on an FTO/TiO2 (FTO: fluorine-doped tin oxide) substrate, resulting in a photoanode FTO/TiO2/Dye-HZ that exhibits a specific PEC response to N2H4. Hydrazine reacts with the acetyl group in the Dye-HZ molecule, leading to its removal and the formation of a hydroxy group. The hydroxy group dissociates a hydrogen ion, forming a phenoxide anion with strong electron-donating characteristics. As a result, the dye molecule exhibits a strong intramolecular charge transfer effect, significantly enhancing absorbance and photoelectric response under visible light irradiation, leading to a remarkable increase in photocurrent and enabling highly sensitive detection of hydrazine. Furthermore, the PEC sensor demonstrates excellent selectivity and can be applied for the detection of hydrazine in real water samples. This study presents an innovative PEC sensing approach for hydrazine based on responsive photoactive molecules, providing new insights for PEC detection of other environmental pollutants.

Development of novel nanocomposite-modified photoelectrochemical sensor based on the association of bismuth vanadate and MWCNT-grafted-molecularly imprinted poly(acrylic acid) for dopamine determination at nanomolar level

This study proposes the development of a new photoelectrochemical (PEC) sensor for the determination of dopamine (DA) at nanomolar levels. The PEC sensor was based on a physical mixture of bismuth vanadate (BiVO4) with nanocomposite molecularly imprinted poly(acrylic acid) (MIP-AA) grafted onto MWCNTox by using the surface-controlled radical polymerization strategy with an INIFERTER reagent. XRD, diffuse reflectance spectroscopy (DRE), SEM, TEM, and TGA were employed to characterize the materials. Photoelectrochemical analyses were carried out with GCE/BiVO4/MIP-AA sensor under visible light using a potential of 0.6 V, phosphate buffer (0.1 mol L-1) at pH 7.0, and modifying the GCE with a film composed of monoclinic BiVO4 at 3.5 mg mL-1 and nanocomposite MIP prepared with acrylic acid (MIP-AA) at 0.1 mg mL-1. The proposed method using the GCE/BiVO4/MIP-AA sensor presented a limit of detection (LOD) of 2.9 nmol L-1, a linear range from 9.7 to 150 nmol L-1 and it was successfully applied for analysis of DA in urine samples using external calibration curve yielding recovery values of 90-105%. Additionally, the proposed PEC sensor allowed DA determination without interference from uric acid, ascorbic acid, epinephrine, norepinephrine, and other unwanted interferences.

Small molecule probes as versatile energy acceptors: A breakthrough in photoelectrochemical sensing for sulfur dioxide recording in rat brain

Microelectrode-based photoelectrochemical (PEC) sensing is a newly developed and promising analytical technique for in vivo analysis. However, the inadequate specificity in complex environment of living bodies restricted its further in vivo application. Herein, we utilized a small molecule probe as the energy acceptor to quench the photocurrent of CdTe quantum dots through energy transfer. The efficiency of energy transfer was modulated by the concentration of target SO2, resulting in changes in photocurrent. The chemical recognition reaction between small molecule probes and SO2 enhanced the specificity of PEC sensing, thus guaranteeing its in vivo applications. Furthermore, with the use of light addressing strategy, simultaneous detection in the multiple brain regions was implemented. The energy transfer based light addressable PEC microsensor achieved monitoring fluctuations of SO2 levels in multiple brain regions of rats with epilepsy.

β-Bi2O3-Bi2WO6 Nanocomposite Ornated with meso-Tetraphenylporphyrin: Interfacial Electrochemistry and Photoresponsive Detection of Nanomolar Hexavalent Cr

Hexavalent chromium exposure via inhalation, ingestion, or both has been proven to adversely affect internal organs, induce toxic effects, cause allergies, and contribute to the development of cancer. It requires a substantial and challenging effort to detect several heavy metal ions conveniently, sensitively, and reliably by using materials that are easy to synthesize and have a high yield. The impact of light on the electrocatalytic oxidation/reduction process proves an environmentally friendly methodology with numerous applications in pollution control. The extensive use of photoactive materials in photoelectrochemical (PEC) sensors necessitates the development of stable and highly effective photoactive materials. Hence, the solvothermal synthesis of the organic-inorganic hybrid nanocomposite β-Bi2O3-Bi2WO6/H2TPP with varying weight percentages of meso-tetraphenylporphyrin (H2TPP) resulted in a selective electrode for electrocatalytic and photoelectrocatalytic reduction of Cr6+ on fluorine-doped tin oxide (FTO) by an adsorption-reduction mechanism. H2TPP increases the active site density and provides an effective surface area for efficient adsorption by providing both pyridinic- and pyrrolic-N atoms to β-Bi2O3-Bi2WO6/H2TPP. H2TPP could effectively adsorb Cr6+ in the β-Bi2O3-Bi2WO6/H2TPP composite system through electrostatic interaction, and the adsorbed Cr6+ ions were reduced to trivalent chromium Cr3+, resulting in promising Cr6+ sensing. The projected density of states and Bader charge calculations result in the electrostatic attraction among the N-2p orbital of H2TPP and the 3d and 4s orbitals of the Cr atom, resulting in the adsorption of the hexavalent Cr atom onto the active center of H2TPP. Moreover, the addition of H2TPP results in the development of a mesoporous surface that offers strong electrical conductivity, a substantial surface area, improved charge-mass transport, intimate contact between the electrolyte and catalyst, an extended fluorescence lifetime, and increased stability. The role of pH values was thoroughly investigated. All electrochemical and photoelectrochemical studies were carried out on 5 wt % H2TPP-ornated β-Bi2O3-Bi2WO6. Nanocomposite β-Bi2O3-Bi2WO6/5 wt % H2TPP demonstrated reliable cyclic stability, reproducibility, good sensitivity (8.005 μA mM cm-2), and a low limit of detection (LOD) (8.0 nM) toward photoelectrocatalytic reduction of Cr6+. The interference study in the presence of a few inorganic entities exhibited excellent selectivity. This tale amplification approach for developing a β-Bi2O3-Bi2WO6/5 wt % H2TPP nanocomposite system suggests a deeper understanding of the application of photoelectrocatalytic reduction of Cr6+ in environmental remediation with real samples under light irradiation.

Photoelectrochemical Enzyme Biosensor for Malate Using Quantum Dots on Indium Tin Oxide/Plastics as a Sensing Surface

A photoelectrochemical biosensor for malate was developed using an indium tin oxide (ITO) layer deposited on a poly(ethylene terephthalate) plastic sheet as a transparent electrode material for the immobilization of malate dehydrogenase together with CdTe quantum dots. Different approaches were compared for the construction of the bioactive layer; the highest response was achieved by depositing malate dehydrogenase together with CdTe nanoparticles and covering it with a Nafion/water (1:1) mixture. The amperometric signal of this biosensor was recorded during irradiation with a near-UV LED in the flow-through mode. The limit of detection was 0.28 mmol/L, which is adequate for analyzing malic acid levels in drinks such as white wines and fruit juices. The results confirm that the cheap ITO layer deposited on the plastic sheet after cutting into rectangular electrodes allows for the economic production of photoelectrochemical (bio)sensors. The combination of NAD+-dependent malate dehydrogenase with quantum dots was also compatible with such an ITO surface.

Chemical Redox Cycling in an Organic Photoelectrochemical Transistor: Toward Dual Chemical and Electronic Amplification for Bioanalysis

The organic photoelectrochemical transistor (OPECT) has been proven to be a promising platform to study the rich light-matter-bio interplay toward advanced biomolecular detection, yet current OPECT is highly restrained to its intrinsic electronic amplification. Herein, this work first combines chemical amplification with electronic amplification in OPECT for dual-amplified bioanalytics with high current gain, which is exemplified by human immunoglobulin G (HIgG)-dependent sandwich immunorecognition and subsequent alkaline phosphatase (ALP)-mediated chemical redox cycling (CRC) on a metal-organic framework (MOF)-derived BiVO4/WO3 gate. The target-dependent redox cycling of ascorbic acid (AA) acting as an effective electron donor could lead to an amplified modulation against the polymer channel, as indicated by the channel current. The as-developed bioanalysis could achieve sensitive HIgG detection with a good analytical performance. This work features the dual chemical and electronic amplification for OPECT bioanalysis and is expected to stimulate further interest in the design of CRC-assisted OPECT bioassays.

High-Precision Single-Cell microRNA Therapy by a Functional Nanopipette with Sensitive Photoelectrochemical Feedback

This work proposes the concept of single-cell microRNA (miR) therapy and proof-of-concept by engineering a nanopipette for high-precision miR-21-targeted therapy in a single HeLa cell with sensitive photoelectrochemical (PEC) feedback. Targeting the representative oncogenic miR-21, the as-functionalized nanopipette permits direct intracellular drug administration with precisely controllable dosages, and the corresponding therapeutic effects can be sensitively transduced by a PEC sensing interface that selectively responds to the indicator level of cytosolic caspase-3. The experimental results reveal that injection of ca. 4.4 × 10-20  mol miR-21 inhibitor, i.e., 26488 copies, can cause the obvious therapeutic action in the targeted cell. This work features a solution to obtain the accurate knowledge of how a certain miR-drug with specific dosages treats the cells and thus provides an insight into futuristic high-precision clinical miR therapy using personalized medicine, provided that the prerequisite single-cell experiments are courses of personalized customization.

A Solution-Processable Porphyrin-Based Hydrogen-Bonded Organic Framework for Photoelectrochemical Sensing of Carbon Dioxide

Detecting CO2 in complex gas mixtures is challenging due to the presence of competitive gases in the ambient atmosphere. Photoelectrochemical (PEC) techniques offer a solution, but material selection and specificity remain limiting. Here, we constructed a hydrogen-bonded organic framework material based on a porphyrin tecton decorated with diaminotriazine (DAT) moieties. The DAT moieties on the porphyrin molecules not only facilitate the formation of complementary hydrogen bonds between the tectons but also function as recognition sites in the resulting porous HOF materials for the selective adsorption of CO2 . In addition, the in-plane growth of FDU-HOF-2 into anisotropic molecular sheets with large areas of up to 23000 μm2 and controllable thickness between 0.298 and 2.407 μm were realized in yields of over 89 % by a simple solution-processing method. The FDU-HOF-2 can be directly grown and deposited onto different substrates including silica, carbon, and metal oxides by self-assembly in situ in formic acid. As a proof of concept, a screen-printing electrode deposited with FDU-HOF-2 was fabricate as a label-free photoelectrochemical (PEC) sensor for CO2 detection. Such a signal-off PEC sensor exhibits low detection limit for CO2 (2.3 ppm), reusability (at least 30 cycles), and long-term working stability (at least 30 days).

DNA intercalation makes possible superior-gain organic photoelectrochemical transistor detection

DNA intercalation has increasingly been studied for various scenario implementations due to the diverse functions of DNA/intercalators. Nascent organic photoelectrochemical transistor (OPECT) biosensing taking place in organic electronics and photoelectrochemical bioanalysis represents a promising technological frontier in the arena. In this work, we first devise DNA intercalation-enabled OPECT for miRNA detection with a superior gain up to 17100. Intercalation of [Ru(bpy)2dppz]2+ within the miRNA-initiated hybrid chain reaction (HCR)-derived duplex DNA is realized for producing anodic photocurrent upon light stimulation, causing the corresponding target-dependent alternation in gate voltage (VG) and hence the modulated channel current (IDS) of poly (3,4-ethylenedioxythiophene) doped with poly (styrene sulfonate) (PEDOT:PSS) under specific drain voltage (VDS) for quantitative miRNA-21 analysis, which shows a wide linear relationship and a low detection limit of 5.5 × 10-15 mol L-1. This study features the DNA intercalation-enabled organic electronics with superior gain and is envisaged to attract more attention to explore DNA adducts for innovative bioelectronics and biosensing, given the diverse DNA binders with multiple functions.

Type-I heterojunction destruction by In situ formation of Bi2S3 for split-type photoelectrochemical aptasensor

Development of new strategies in photoelectrochemical (PEC) sensors is an important way to realize sensitive detection of biomolecule. In this study, mesoporous silica nanospheres (MSNs)-assisted split-type PEC aptasensor with in situ generation of Bi₂S₃ was proposed to achieve reliable detection of prostate-specific antigen (PSA). To be more specific, this bioresponsive release system will release large amounts of Na₂S by the reaction between PSA and aptamer that capped Na₂S-loading MSNs. Next, the Na₂S reacts with Bi to yield BiOI/BiOBr/Bi₂S₃ composite, which leads to an alteration in the electron-hole transfer pathway of the photoelectric material and a decrease in the response. As the PSA concentration increases, more Na₂S can be released and lower photocurrent is obtained. The linear range under the optimal experimental conditions is 10 pg·mL^-1-1 μg⋅mL^-1, and the detection limit is 1.23 pg⋅mL^-1, which has satisfactory stability and anti-interference.

A ZnIn2S4/Ag2CO3 Z-scheme heterostructure-based photoelectrochemical biosensor for neuron-specific enolase

An efficient photo-to-electrical signal is pivotal to photoelectrochemical (PEC) biosensors. In our work, a novel PEC biosensor was fabricated for the detection of neuron-specific enolase (NSE) based on a ZnIn2S4/Ag2CO3 Z-scheme heterostructure. Due to the overlapping band potentials of the ZnIn2S4 and Ag2CO3, the formed Z-scheme heterostructure can promote the charge separation and photoelectric conversion efficiency. And the concomitant Ag nanoparticles in Ag2CO3 provided multiple functions to enhance the PEC response of the Z-scheme heterostructure. It acts not only as a bridge for the transfer of carriers between ZnIn2S4 and Ag2CO3, promoting the constructed Z-scheme heterostructure, but also as electron mediators to accelerate the transfer of photogenerated carriers and improve the capture of visible light of the Z-scheme heterostructure by surface plasmon resonance (SPR). Compared with single Ag2CO3 and ZnIn2S4, the photocurrent of the designed Z-scheme heterostructure increased more than 20 and 60 times respectively. The fabricated PEC biosensor based on a ZnIn2S4/Ag2CO3 Z-scheme heterostructure exhibits sensitive detection to NSE, and presents a linear range of 50 fg·mL-1 ~ 200 ng·mL-1 with a limit of detection of 4.86 fg·mL-1. The proposed PEC biosensor provides a potential approach for clinical diagnosis.

Effect of perylene assembly shapes on photoelectrochemical properties and ultrasensitive biosensing behaviors toward dopamine

In this study, a photoelectrochemical (PEC) sensor based on perylene diimide derivatives (PDIs) was developed for the ultrasensitive quantification of dopamine (DA). PDIs were able to form self-assembled semiconductor nanostructures by strong π-π stacking, suitable for photoactive substances. Moreover, the shape of the PDI significantly affected the PEC properties of these nanostructures. The results showed that amino PDI with two-dimensional (2D) wrinkled layered nanostructures exhibited superior PEC properties relative to one-dimensional (1D) nanorods and fiber-based nanostructures (methyl and carboxyl PDIs). Based on these results, a mechanism for PEC sensor action was then proposed. The presence of 2D amino-PDI resulted in accelerated charge separation and transport. Furthermore, dopamine acted as effective electron donor to cause an increase in photocurrent. The as-obtained sensor was then used to detect small molecules like DA. A blue light optimized sensor at an applied potential of 0.7 V showed a detection limit of 1.67 nM with a wide linear range of 5 nM to 10 μM. On the other hand, the sensor presented acceptable reliability in determining DA in real samples. A recovery rate between 97.99 and 101.0% was obtained. Overall, controlling the morphology of semiconductors can influence PEC performance, which is a useful finding for the future development of PEC sensors.

A cathodic photoelectrochemical biosensor based on CRISPR/Cas12a trans-cleavage mediated p-n heterojunction quenching mode for microRNA determination

In this study, a cathodic photoelectrochemical (PEC) bioanalysis for sensitive determination of microRNA (miRNA) has been constructed based on CRISPR/Cas12a trans-cleavage mediated [(C6)₂Ir(dcbpy)]⁺PF₆^- (C6 represents coumarin-6 and dcbpy represents 4,4'-dicarboxyl-2,2'-bipyridine)-sensitized NiO photocathode and p-n heterojunction quenching mode. The [(C6)₂Ir(dcbpy)]⁺PF₆^--sensitized NiO photocathode exhibits a stable and dramatically improved photocurrent signal due to highly effective photosensitization of [(C6)₂Ir(dcbpy)]⁺ PF₆^-. Then Bi₂S₃ quantum dots (Bi₂S₃ QDs) is captured on the photocathode, resulting in markedly quenching of the photocurrent. When target miRNA is specifically recognized by the hairpin DNA to stimulate the trans-cleavage activity of CRISPR/Cas12a, leading to the leave of the Bi₂S₃ QDs. The photocurrent is gradually recovered with the increasing target concentration. Thus, the quantitative signal response to target is achieved. Benefiting from excellent performance of NiO photocathode, intense quenching effect of p-n heterojunction and accurate recognition ability of CRISPR/Cas12a, the cathodic PEC biosensor shows a wider linear range over 0.1 fM-10 nM, with a low detection limit of 36 aM. Also, the biosensor exhibits satisfying stability and selectivity.

Metallointercalated-DNA Nanotubes as Functional Light Antenna for Organic Photoelectrochemical Transistor Biosensor with Minimum Background

Organic photoelectrochemical transistor (OPECT) biosensor with a removed background is desired but remains challenging. So far, scientists still lack a solution to this issue. The light-matter interplay is expected to achieve an advanced OPECT with unknown possibilities. Here, we address this challenge by tailoring a unique heterogeneous light antenna as the functional gating module and its cascade interaction with a proper channel, which is exemplified by bioinduced [Ru(bpy)2dppz]2+-intercalated DNA nanotubes (NTs)/NiO heterojunction and its modulation against a diethylenetriamine-treated poly(ethylene dioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) channel. Light stimulation of the antenna can generate the obvious cathodic photocurrent and, hence, modulate the channel, accomplishing OPECT with a minimal background and the hitherto highest current gain of 19 000. Linking with nucleic acid hybridization using microRNA-155 as the representative target, the device achieves sensitive biosensing down to 5.0 fM.

Using environmental DNA metabarcoding to monitor fish communities in small rivers and large brooks: Insights on the spatial scale of information

Monitoring fish communities is central to the evaluation of ecological health of rivers. Both presence/absence of fish species and their relative quantity in local fish assemblages are crucial parameters to measure. Fish communities in lotic systems are traditionally monitored via electrofishing, characterized by a known limited efficiency and high survey costs. Analysis of environmental DNA could serve as a non-destructive alternative for detection and quantification of lotic fish communities, but this approach still requires further insights in practical sampling schemes incorporating transport and dilution of the eDNA particles; optimization of predictive power and quality assurance of the molecular detection method. Via a controlled cage experiment, we aim to extend the knowledge on streamreach of eDNA in small rivers and large brooks, as laid out in the European Water Framework Directive's water typology. Using a high and low source biomass in two river transects of a species-poor river characterized by contrasting river discharge rates, we found strong and significant correlations between the eDNA relative species abundances and the relative biomass per species in the cage community. Despite a decreasing correlation over distance, the underlying community composition remained stable from 25 to 300 m, or up to 1 km downstream of the eDNA source, depending on the river discharge rate. Such decrease in similarity between relative source biomass and the corresponding eDNA-based community profile with increasing distance downstream from the source, might be attributed to variation in species-specific eDNA persistence. Our findings offer crucial insights on eDNA behaviour and characterization of riverine fish communities. We conclude that water sampled from a relatively small river offers an adequate eDNA snapshot of the total fish community in the 300-1000 m upstream transect. The potential application for other river systems is further discussed.

Hybridization Chain Reaction-Enhanced Biocatalytic Precipitation on Flower-like Bi2S3: Toward Organic Photoelectrochemical Transistor Aptasensing with High Transconductance

Organic photoelectrochemical transistor (OPECT) bioanalysis has recently emerged as a promising avenue for biomolecular sensing, providing insight into the next-generation of photoelectrochemical biosensing and organic bioelectronics. Herein, this work validates the direct enzymatic biocatalytic precipitation (BCP) modulation on a flower-like Bi₂S₃ photosensitive gate for high-efficacy OPECT operation with high transconductance (g_m), which is exemplified by a prostate-specific antigen (PSA)-dependent hybridization chain reaction (HCR) and subsequent alkaline phosphatase (ALP)-enabled BCP reaction toward PSA aptasensing. It has been shown that light illumination could ideally achieve the maximized g_m at zero gate bias, and BCP could efficiently modulate the device's interfacial capacitance and charge-transfer resistance, resulting in a significantly changed channel current (I_DS). The as-developed OPECT aptasensor realizes good analysis performance for PSA with a detection limit of 10 fg mL^-1. This work features direct BCP modulation of organic transistors and is expected to stimulate further interest in exploring advanced BCP-interfaced bioelectronics with unknown possibilities.

A universal bacterial sensor created by integrating a light modulating aptamer complex with photoelectrochemical signal readout

Photoelectrochemical (PEC) signal transduction is of great interest for ultrasensitive biosensing; however, signal-on PEC assays that do not require target labeling remain elusive. In this work, we developed a signal-on biosensor that uses nucleic acids to modulate PEC currents upon target capture. Target presence removes a biorecognition probe from a DNA duplex carrying a gold nanoparticle, bringing the gold nanoparticle in direct contact to the photoelectrode and increasing the PEC current. This assay was used to develop a universal bacterial detector by targeting peptidoglycan using an aptamer, demonstrating a limit-of-detection of 82 pg/mL (13 pM) in buffer and 239 pg/mL (37 pM) in urine for peptidoglycan and 1913 CFU/mL forEscherichia coliin urine. When challenged with a panel of unknown targets, the sensor identified samples with bacterial contamination versus fungi. The versatility of the assay was further demonstrated by analyzing DNA targets, which yielded a limit-of-detection of 372 fM.

Covalent organic framework: A state-of-the-art review of electrochemical sensing applications

Covalent organic framework (COF), a kind of porous polymer with crystalline properties, is a periodic porous framework material with precise regulation at atomic level, which can be formed by the orderly connection of pre-designed organic construction units through covalent bonds. Compared with metal-organic frameworks, COFs exhibit unique performance, including tailor-made functions, stronger load ability, structural diversity, ordered porosity, intrinsic stability and excellent adsorption features, are more conducive to the expansion of electrochemical sensing applications and the universality of applications. In addition, COFs can accurately integrate organic structural units with atomic precision into ordered structures, so that the structural diversity and application of COFs can be greatly enriched by designing new construction units and adopting reasonable functional strategies. In this review, we mainly summarized state-of-the-art recent advances of the classification and synthesis strategy of COFs, the design of functionalized COF for electrochemical sensors and COFs-based electrochemical sensing. Then, an overview of the considerable recent advances made in applying outstanding COFs to establish electrochemical sensing platform, including electrochemical sensor based on voltammetry, amperometry, electrochemical impedance spectroscopy, electrochemiluminescence, photoelectrochemical sensor and others. Finally, we discussed the positive outlooks, critical challenges and bright directions of COFs-based electrochemical sensing in the field of disease diagnosis, environmental monitoring, food safety, drug analysis, etc.

Photo-Enhanced Chemo-Transistor Platform for Ultrasensitive Assay of Small Molecules

Compared with traditional assay techniques, field-effect transistors (FETs) have advantages such as fast response, high sensitivity, being label-free, and point-of-care detection, while lacking generality to detect a wide range of small molecules since most of them are electrically neutral with a weak doping effect. Here, we demonstrate a photo-enhanced chemo-transistor platform based on a synergistic photo-chemical gating effect in order to overcome the aforementioned limitation. Under light irradiation, accumulated photoelectrons generated from covalent organic frameworks offer a photo-gating modulation, amplifying the response to small molecule adsorption including methylglyoxal, p-nitroaniline, nitrobenzene, aniline, and glyoxal when measuring the photocurrent. We perform testing in buffer, artificial urine, sweat, saliva, and diabetic mouse serum. The limit of detection is down to 10^-19 M methylglyoxal, about 5 orders of magnitude lower than existing assay technologies. This work develops a photo-enhanced FET platform to detect small molecules or other neutral species with enhanced sensitivity for applications in fields such as biochemical research, health monitoring, and disease diagnosis.

Synergistic Signal Amplification-Initiated Innovative Self-Powered Photoelectrochemical Aptasensing: An Ingenious Photocathode Activated by the High-Light-Harvesting Photoanode

Exploiting ingenious photoelectrodes and innovative signal amplification strategies has the potential to achieve high sensitivity in self-powered cathodic photoelectrochemical (PEC) analysis. In this work, a novel self-powered PEC sensing platform was constructed by integrating a synergistic signal amplification of an ingenious photocathode with a high light-harvesting photoanode. In the dual photoelectrode-based PEC system, the amplified photocurrent signals were induced by a synergistic enhancement: (1) the photocurrent of the BiOBr photocathode was improved by the incorporation of nitrogen-doped graphene; (2) the photocurrent of the self-powered sensor was activated by the high-light-harvesting Bi₂S₃-C₃N₄ photoanode. Subsequently, the rational mechanism for synergistic signal amplification was investigated. For the construction of the sensing interface, an aptamer was introduced as the recognition element to specifically capture the streptomycin (STR) target. Under optimal conditions, the constructed self-powered aptasensor has the merits of good linear range (1 × 10^-11 to 5 × 10^-7 M), acceptable limit of detection (1.18 × 10^-12 M), and excellent stability and selectivity for STR detection. Additionally, the proposed self-powered aptasensor showed acceptable accuracy for the detection of STR in water. Hopefully, this might stimulate more interest in designing and constructing novel platforms for exquisite photocathodic monitoring of various contaminants in the environment.

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

CRISPR/Cas12a-based MUSCA-PEC strategy for HSV-1 assay

In the photoelectrochemical sensing, constant potential excitation to get the photoelectrochemical signal is the main excitation signal mode. Novel method for photoelectrochemical signal obtaining is needed. Inspired by this ideal, a photoelectrochemical strategy for Herpes simplex virus (HSV-1) detection with multiple potential step chronoamperometry (MUSCA) pattern was fabricated using CRISPR/Cas12a cleavage coupled with entropy-driven target recycling. In the presence of target, HSV-1, the Cas12a was activated by the H₁-H₂ complex obtained by entropy-driven, then digesting the circular fragment of csRNA to expose single-stranded crRNA2 and alkaline phosphatase (ALP). The inactive Cas12a was self-assembled with crRNA2 and activated again with the help of assistant dsDNA. After multiple rounds of CRISPR/Cas12a cleavage and magnetic separation, MUSCA, as a signal amplifier, collected the enhanced photocurrent responses generated by catalyzed p-Aminophenol (p-AP). Different from the reported signal enhancement strategies based on photoactive nanomaterials and sensing mechanisms, MUSCA technique endowed the strategy with unique advantages of direct, fast and ultrasensitive. A superior detection limit of 3 aM toward HSV-1 was achieved. This strategy was successfully applied for HSV-1 detection in Human serum samples. The combination of MUSCA technique and CRISPR/Cas12a assay brings broader potential prospect for the detection of nucleic acids.

Polymer Dot-Gated Accumulation-Type Organic Photoelectrochemical Transistor for Urea Biosensing

Organic photoelectrochemical transistor (OPECT) biosensing represents a new platform interfacing optoelectronics and biological systems with essential amplification, which, nevertheless, are concentrated on depletion-type operation to date. Here, a polymer dot (Pdot)-gated accumulation-type OPECT biosensor is devised and applied for sensitive urea detection. In such a device, the as-designed Pdot/poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) is validated as a superior gating module against the diethylenetriamine (DETA) de-doped poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) channel, and the urea-dependent status of Pdots has been shown to be sensitively correlated with the device's response. High-performance urea detection is thus realized with a wide linear range of 1 μM-50 mM and a low detection limit of 195 nM. Given the diversity of the Pdot family and its immense interactions with other species, this work represents a generic platform for developing advanced accumulation-type OPECT and beyond.

Label-free photoelectrochemical immunosensing of α-fetoprotein based on Eu-TiO2 nanocomposites sensitized with dye-encapsulated HMA

In this study, a sensitive photoelectrochemical immunosensor with dye-enhanced anodic photocurrent response was proposed for sensitive detection of α-fetoprotein (AFP). Specifically, europium-doped TiO₂ (Eu-TiO₂) was used as the photoelectrochemical functional material and coated onto indium tin oxide (ITO) electrode. Doxorubicin (DOX) as an excellent fluorescent dye was encapsulated in the hydrophobically modified alginate (HMA). Then the dye-loaded HMA was modified onto the surface of Eu-TiO₂ to further sensitize the photocurrent response. The results showed that the photoelectrical signal was enhanced and stabilized due to the effect of sensitization of DOX on Eu-TiO₂ material. The constructed PEC sensor revealed a good linear response to AFP antigen ranging from 0.5 to 100 ng/mL with a detection limit of 0.41 pg/mL. The clinical patient's serum test results obtained from the proposed PEC immunosensor were consistent with those obtained from the commercial electrochemilunescence assay. The proposed PEC sensing method could be a promising analytical tool for the detection of AFP in clinical analysis.

Dual Functional Conjugated Acetylenic Polymers: High-Efficacy Modulation for Organic Photoelectrochemical Transistors and Structural Evolution for Bioelectronic Detection

Conjugated acetylenic polymers (CAPs) have emerged as a unique class of metal-free semiconductors with tunable electrical and optical properties yet their full potential remains largely unexplored. Organic bioelectronics is envisioned to create more opportunities for innovative biomedical applications. Herein, we report a poly(1,4-diethynylbenzene) (pDEB)/NiO gated enhancement-mode poly(ethylene dioxythiophene)-poly(styrene sulfonate) organic photoelectrochemical transistor (OPECT) and its structural evolution toward bioelectronic detection. pDEB was synthesized via copper-mediated Glaser polycondensation of DEB monomers on the NiO/FTO substrate, and the as-synthesized pDEB/NiO/FTO can efficiently modulate the enhancement-mode device with a high current gain. Linking with a sandwich immunoassay, the labeled alkaline phosphatase can catalyze sodium thiophosphate to generate H₂S, which will react with the diacetylene group in pDEB through the Michael addition reaction, resulting in an altered molecular structure and thus the transistor response. Exemplified by HIgG as the model target, the developed biosensor achieves highly sensitive detection with a linear range of 70 fg mL^-1-10 ng mL^-1 and a low detection limit of 28.5 fg mL^-1. This work features the dual functional CAP-gated OPECT, providing not only a novel gating module but also a structurally new rationale for bioelectronic detection.

Recent Progress of Energy-Storage-Device-Integrated Sensing Systems

With the rapid prosperity of the Internet of things, intelligent human-machine interaction and health monitoring are becoming the focus of attention. Wireless sensing systems, especially self-powered sensing systems that can work continuously and sustainably for a long time without an external power supply have been successfully explored and developed. Yet, the system integrated by energy-harvester needs to be exposed to a specific energy source to drive the work, which provides limited application scenarios, low stability, and poor continuity. Integrating the energy storage unit and sensing unit into a single system may provide efficient ways to solve these above problems, promoting potential applications in portable and wearable electronics. In this review, we focus on recent advances in energy-storage-device-integrated sensing systems for wearable electronics, including tactile sensors, temperature sensors, chemical and biological sensors, and multifunctional sensing systems, because of their universal utilization in the next generation of smart personal electronics. Finally, the future perspectives of energy-storage-device-integrated sensing systems are discussed.

Wash-free photoelectrochemical DNA detection based on photoredox catalysis combined with electroreduction and light blocking by magnetic microparticles

To obtain a sensitive, wash-free photoelectrochemical biosensor based on electron mediation between an electrode and a photoredox catalyst (PC) label, unavoidable O₂-related reactions should have no effect or be beneficial, and the rate of electron mediation should depend on the distance between the PC label and electrode. A wash-free photoelectrochemical biosensor that (i) combines photoredox catalysis of a PC label with electrochemical reduction of an electron mediator, and (ii) uses a light-blocking multilayer of magnetic microparticles was developed. O₂ participates as an electron acceptor in photoredox catalysis; thus, increasing rather than decreasing the electrochemical signal. Upon photoirradiation from the opposite side of a transparent indium tin oxide (ITO) electrode in contact with the solution, the light intensity in the solution is sharply decreased by the light-blocking multilayer, which increases the contribution of affinity-bound PC labels on the ITO electrode to the electrochemical signal compared to that of unbound PC labels in solution. Utilizing eosin Y (EY^2-) and Fe(CN)₆^4- as the PC and electron mediator (i.e., electron donor), respectively, enabled rapid redox cycling based on photoredox catalysis combined with electroreduction. The cathodic charge is mainly related to electron transfer from Fe(CN)₆^4- to excited EY^2- (Type I photosensitization), rather than energy transfer from excited EY^2- to O₂, which generates ¹O₂ (Type II photosensitization). The developed detection scheme was applied to wash-free detection of a model target DNA. Detection limits of ∼200 pM were obtained in both phosphate-buffered saline and serum without washing. The developed scheme enables simple photoelectrochemical detection.

Bioderived establishment of three-dimensional type-I Ag2S/ZnIn2S4 heterojunction for high-efficacy organic photoelectrochemical transistor biomolecular detection

Advanced optoelectronic devices have attracted extensive interdisciplinary interest but lags far behind in biomolecular detection. The nascent organic photoelectrochemical transistor (OPECT) is expected to become a versatile platform to this end. Herein, using biological derivation of type-I Ag₂S/ZnIn₂S₄ heterojunction, a light-fueled high-efficacy OPECT system with zero-gate-biased operation is successfully developed for biomolecular detection. Exemplified by a sandwich immunocomplexing towards mouse IgG (MIgG) with Ag nanoparticles (Ag NPs) as the label, steering the acidolysis-release of Ag⁺ toward ZnIn₂S₄ could induce the in-situ formation of type-I Ag₂S/ZnIn₂S₄ heterojunction, increasing the recombination of light-activated excitons and thus inhibiting the photo-responsibility of ZnIn₂S₄, as sensitively monitored by the amplified OPECT response. The proposed device could achieve good analytical performance in terms of high specificity and sensitivity, with a detection limit as low as 33.7 fg mL^-1. This OPECT device based on bio-induced formation of type-I heterojunction can provide a novel route to biomolecular detection, and offered a new perspective for the optoelectronic sensors to be used in futuristic physiological and pathological detection.

Alkaline Phosphatase-Mediated Bioetching of CoOOH/BiVO4 for Signal-On Organic Photoelectrochemical Transistor Bioanalysis

Organic photoelectrochemical transistor (OPECT) bioanalytics has recently appeared as a promising route for biological measurements, which has major implications in both next-generation photoelectrochemical (PEC) bioanalysis and futuristic biorelated implementations. Via biological dissociation of materials, bioetching is a useful technique for bio-manufacturing and bioanalysis. The intersection of these two domains is expected to be a possible way to achieve innovative OPECT bioanalytics. Herein, we validate such a possibility, which is exemplified by alkaline phosphatase (ALP)-mediated bioetching of a CoOOH/BiVO₄ gate for a signal-on OPECT immunoassay of human immunoglobulin G (HIgG) as the model target. Specifically, target-dependent bioetching of the upper CoOOH layer could result into an enhanced electrolyte contact and light accessibility to BiVO₄, leading to the modulated response of the polymeric poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) channel that could be monitored by the channel current. The introduced biosensor achieves sensitive detection of HIgG with high selectivity and sensitivity. This work features bioetching-enabled high-efficacy OPECT bioanalysis and is anticipated to serve as a generic protocol, considering the diverse bioetching routes.

2D MXene-Based Biosensing: A Review

MXene emerged as decent 2D material and has been exploited for numerous applications in the last decade. The remunerations of the ideal metallic conductivity, optical absorbance, mechanical stability, higher heterogeneous electron transfer rate, and good redox capability have made MXene a potential candidate for biosensing applications. The hydrophilic nature, biocompatibility, antifouling, and anti-toxicity properties have opened avenues for MXene to perform in vitro and in vivo analysis. In this review, the concept, operating principle, detailed mechanism, and characteristic properties are comprehensively assessed and compiled along with breakthroughs in MXene fabrication and conjugation strategies for the development of unique electrochemical and optical biosensors. Further, the current challenges are summarized and suggested future aspects. This review article is believed to shed some light on the development of MXene for biosensing and will open new opportunities for the future advanced translational application of MXene bioassays.