Relative risk analysis of several manufactured nanomaterials: an insurance industry context

Knowledge and Instance Mapping: architecture for premeditated interoperability of disparate data for materials

Predicting and elucidating the impacts of materials on human health and the environment is an unending task that has taken on special significance in the context of nanomaterials research over the last two decades. The properties of materials in environmental and physiological media are dynamic, reflecting the complex interactions between materials and these media. This dynamic behavior requires special consideration in the design of databases and data curation that allow for subsequent comparability and interrogation of the data from potentially diverse sources. We present two data processing methods that can be integrated into the experimental process to encourage pre-mediated interoperability of disparate material data: Knowledge Mapping and Instance Mapping. Originally developed as a framework for the NanoInformatics Knowledge Commons (NIKC) database, this architecture and associated methods can be used independently of the NIKC and applied across multiple subfields of nanotechnology and material science.

Nanoparticle formulations: A smart era of advanced treatment with nanotoxicological imprints on the human body

In the modern era, nanoparticles are the preferred dosage form, and maximum research is going on in the field of nanoparticle formulations. But as they are so small, nanoparticles are able to slip through the body's defenses and cause damage to the organs and tissues deep inside. In recent years, most researchers have focused solely on the therapeutic value of drugs or, at times, the performance of dosage forms, but few have given toxicity studies equal weight in their research. This review demonstrates that nanoparticle formulations are not suitable from a safety standpoint. So, researchers should be focused on alternative formulations like nanoemulsion, nanogel, and other liquids as well as semisolid formulations.

Risk Governance of Nanomaterials: Review of Criteria and Tools for Risk Communication, Evaluation, and Mitigation

Nanotechnologies have been increasingly used in industrial applications and consumer products across several sectors, including construction, transportation, energy, and healthcare. The widespread application of these technologies has raised concerns regarding their environmental, health, societal, and economic impacts. This has led to the investment of enormous resources in Europe and beyond into the development of tools to facilitate the risk assessment and management of nanomaterials, and to inform more robust risk governance process. In this context, several risk governance frameworks have been developed. In our study, we present and review those, and identify a set of criteria and tools for risk evaluation, mitigation, and communication, the implementation of which can inform better risk management decision-making by various stakeholders from e.g., industry, regulators, and the civil society. Based on our analysis, we recommend specific methods from decision science and information technologies that can improve the existing risk governance tools so that they can communicate, evaluate, and mitigate risks more transparently, taking stakeholder perspectives and expert opinion into account, and considering all relevant criteria in establishing the risk-benefit balance of these emerging technologies to enable more robust decisions about the governance of their risks.

Needs and challenges for assessing the environmental impacts of engineered nanomaterials (ENMs)

The potential environmental impact of nanomaterials is a critical concern and the ability to assess these potential impacts is top priority for the progress of sustainable nanotechnology. Risk assessment tools are needed to enable decision makers to rapidly assess the potential risks that may be imposed by engineered nanomaterials (ENMs), particularly when confronted by the reality of limited hazard or exposure data. In this review, we examine a range of available risk assessment frameworks considering the contexts in which different stakeholders may need to assess the potential environmental impacts of ENMs. Assessment frameworks and tools that are suitable for the different decision analysis scenarios are then identified. In addition, we identify the gaps that currently exist between the needs of decision makers, for a range of decision scenarios, and the abilities of present frameworks and tools to meet those needs.

Environmental exposure to TiO2 nanomaterials incorporated in building material

Nanomaterials are increasingly being used to improve the properties and functions of common building materials. A new type of self-cleaning cement incorporating TiO₂ nanomaterials (TiO₂-NMs) with photocatalytic properties is now marketed. This promising cement might provide air pollution-reducing properties but its environmental impact must be validated. During cement use and aging, an altered surface layer is formed that exhibits increased porosity. The surface layer thickness alteration and porosity increase with the cement degradation rate. The hardened cement paste leaching behavior has been fully documented, but the fate of incorporated TiO₂-NMs and their state during/after potential release is currently unknown. In this study, photocatalytic cement pastes with increasing initial porosity were leached at a lab-scale to produce a range of degradation rates concerning the altered layer porosity and thickness. No dissolved Ti was released during leaching, only particulate TiO₂-NM release was detected. The extent of release from this batch test simulating accelerated worst-case scenario was limited and ranged from 18.7 ± 2.1 to 33.5 ± 5.1 mg of Ti/m² of cement after 168 h of leaching. TiO₂-NMs released into neutral aquatic media (simulate pH of surface water) were not associated or coated by cement minerals. The TiO₂-NM release mechanism is suspected to start from freeing of TiO₂-NMs in the altered layer pore network due to partial cement paste dissolution followed by diffusion into the bulk pore solution to the surface. The extent of TiO₂-NM release was not solely related to the cement degradation rate.

Enzyme responsive nucleotide functionalized silver nanoparticles with effective antimicrobial and anticancer activity

Enzyme responsive, water soluble, stable nucleotide coated silver nanoparticles have been synthesized with efficient antimicrobial and anticancer activity.

Review of Research Trends and Methods in Nano Environmental, Health, and Safety Risk Analysis

Despite the many touted benefits of nanomaterials, concerns remain about their possible environmental, health, and safety (EHS) risks in terms of their toxicity, long-term accumulation effects, or dose-response relationships. The published studies on EHS risks of nanomaterials have increased significantly over the past decade and half, with most focused on nanotoxicology. Researchers are still learning about health consequences of nanomaterials and how to make environmentally responsible decisions regarding their production. This article characterizes the scientific literature on nano-EHS risk analysis to map the state-of-the-art developments in this field and chart guidance for the future directions. First, an analysis of keyword co-occurrence networks is investigated for nano-EHS literature published in the past decade to identify the intellectual turning points and research trends in nanorisk analysis studies. The exposure groups targeted in emerging nano-EHS studies are also assessed. System engineering methods for risk, safety, uncertainty, and system reliability analysis are reviewed, followed by detailed descriptions where applications of these methods are utilized to analyze nanomaterial EHS risks. Finally, the trends, methods, future directions, and opportunities of system engineering methods in nano-EHS research are discussed. The analysis of nano-EHS literature presented in this article provides important insights on risk assessment and risk management tools associated with nanotechnology, nanomanufacturing, and nano-enabled products.

Selectively assaying CEA based on a creative strategy of gold nanoparticles enhancing silver nanoclusters' fluorescence

Herein, we have successfully built up connections between nanoparticles and nanoclusters, and further constructed a surface-enhanced fluorescence (SEF) strategy based on the two types of nanomaterials for selectively assaying carcinoembryonic antigen (CEA). Specifically, silver nanoclusters provided the original fluorescence signal, while gold nanoparticles modified with DNA served as the fluorescence enhancer simultaneously. On the basis of this proposed nano-system, the two nanomaterials were linked by CEA-aptamer, thus facilitating SEF occurring. Nevertheless, more competitive interactions between CEA and CEA-aptamer emerged once CEA added, leading to SEF failed and their fluorescence decreased. Significantly, this creative method was further applied to detect CEA, and showed the linear relationship between the fluorescence intensity and CEA concentrations in the range of 0.01-1 ng mL(-1) with a detection limit of 3 pg mL(-1) at a signal-to-noise ratio of 3, demonstrating its sensitivity and promising towards multiple applications. On the whole, this approach we established may broaden potential ways of combining nanoparticles and nanoclusters for detecting trace targets in bioanalytical fields.

Stability, metal leaching, photoactivity and toxicity in freshwater systems of commercial single wall carbon nanotubes

Carbon nanotubes (CNTs) are exciting new materials that have been intensively researched and are becoming increasingly used in consumer products. With rapid growth in production and use of CNTs in many applications, there is the potential for emissions to the environment and thus research is needed to assess the risks associated with CNTs in the environment. Here we show that commercial CNTs differ in their stability, photoactivity, metal leachate, and toxicity to freshwater algae. The behavior between raw and purified variants of the CNTs differs considerably; for example purified CNTs are generally more photoactive, producing singlet oxygen and superoxide, while raw CNTs show little or no photoactivity. Residual metal catalysts differ based on synthesis method used to prepare CNTs and thus may be comprised of elements with varying degrees of toxic potential. Influenced by pH and other constituents of the natural waters, our work shows that metals can leach out from all the commercial CNTs studied, even purified versions, albeit at different levels in many natural waters. As much as 10% of the total residual nickel leached from a purified CNT after 72 h. Aqueous concentrations of molybdenum leached from a different purified CNT were nearly 0.060 mg L(-1) after 72 h. With little sample preparation, CNTs are dispersible in most freshwaters and stable for several days. Not all tested CNTs were toxic; for those CNTs that did induce toxicity we show that photoactivity, not metal leaching, contributes to the toxicity of commercial CNTs to freshwater algae, with growth rates significantly reduced by as much as 200%.

Developing a semi-quantitative occupational risk prediction model for chemical exposures and its application to a national chemical exposure databank

In this study, a semi-quantitative occupational chemical exposure risk prediction model, based on the calculation of exposure hazard indexes, was proposed, corrected, and applied to a national chemical exposure databank. The model comprises one factor used to describe toxicity (i.e., the toxicity index), and two factors used to reflect the exposure potential (i.e., the exposure index and protection deficiency index) of workers exposed to chemicals. An expert system was used to correct the above proposed model. By applying the corrected model to data obtained from a national occupational chemical hazard survey program, chemical exposure risks of various manufacturing industries were determined and a national control strategy for the abatement of occupational chemical exposures was proposed. The results of the present study would provide useful information for governmental agencies to allocate their limited resources effectively for reducing chemical exposures of workers.

Deposition and release kinetics of nano-TiO2 in saturated porous media: effects of solution ionic strength and surfactants

The aggregation, transport and deposition kinetics (i.e. attachment and release) of TiO(2) nanoparticles (nano-TiO(2)) were investigated as a function of ionic strength and the presence of anionic (sodium dodecylbenzene sulfonate, SDBS) and non-ionic (Triton X-100) surfactants in 100% critical micelle concentration (CMC). The electrolyte concentration of the suspensions dictated the kinetic stability of nano-TiO(2) thus influencing the transport and retention of the nanoaggregates in the saturated porous medium. With increasing ionic strength, the interaction between approaching nano-TiO(2) and nano-TiO(2) already deposited onto collectors surfaces seemed to be more favorable than the interaction between approaching nano-TiO(2) and bare collectors surfaces. The abrupt and gradual reduction in electrolyte concentration during the flushing cycles of the column experiments induced the release of previously deposited nano-TiO(2) suggesting attachment of nano-TiO(2) through secondary energy minimum.

Low concentrations of silver nanoparticles in biosolids cause adverse ecosystem responses under realistic field scenario

A large fraction of engineered nanomaterials in consumer and commercial products will reach natural ecosystems. To date, research on the biological impacts of environmental nanomaterial exposures has largely focused on high-concentration exposures in mechanistic lab studies with single strains of model organisms. These results are difficult to extrapolate to ecosystems, where exposures will likely be at low-concentrations and which are inhabited by a diversity of organisms. Here we show adverse responses of plants and microorganisms in a replicated long-term terrestrial mesocosm field experiment following a single low dose of silver nanoparticles (0.14 mg Ag kg⁻¹ soil) applied via a likely route of exposure, sewage biosolid application. While total aboveground plant biomass did not differ between treatments receiving biosolids, one plant species, Microstegium vimeneum, had 32 % less biomass in the Slurry+AgNP treatment relative to the Slurry only treatment. Microorganisms were also affected by AgNP treatment, which gave a significantly different community composition of bacteria in the Slurry+AgNPs as opposed to the Slurry treatment one day after addition as analyzed by T-RFLP analysis of 16S-rRNA genes. After eight days, N₂O flux was 4.5 fold higher in the Slurry+AgNPs treatment than the Slurry treatment. After fifty days, community composition and N₂O flux of the Slurry+AgNPs treatment converged with the Slurry. However, the soil microbial extracellular enzymes leucine amino peptidase and phosphatase had 52 and 27% lower activities, respectively, while microbial biomass was 35% lower than the Slurry. We also show that the magnitude of these responses was in all cases as large as or larger than the positive control, AgNO₃, added at 4-fold the Ag concentration of the silver nanoparticles.

Application of a quantitative weight of evidence approach for ranking and prioritising occupational exposure scenarios for titanium dioxide and carbon nanomaterials

Substantial limitations and uncertainties hinder the exposure assessment of engineered nanomaterials (ENMs). The present deficit of reliable measurements and models will inevitably lead in the near term to qualitative and uncertain exposure estimations, which may fail to support adequate risk assessment and management. Therefore it is necessary to complement the current toolset with user-friendly methods for near-term nanosafety evaluation. This paper proposes an approach for relative exposure screening of ENMs. For the first time, an exposure model explicitly implements quantitative weight of evidence (WoE) methods and utilises expert judgement for filling data gaps in the available evidence-base. Application of the framework is illustrated for screening of exposure scenarios for nanoscale titanium dioxide, carbon nanotubes and fullerenes, but it is applicable to other nanomaterials as well. The results show that the WoE-based model overestimates exposure for scenarios where expert judgement was substantially used to fill data gaps, which suggests its conservative nature. In order to test how variations in input data influence the obtained results, probabilistic Monte Carlo sensitivity analysis was applied to demonstrate that the model performs in stable manner.

Nanoneurotoxicity to nanoneuroprotection using biological and computational approaches

Nanoparticles (NPs) that are ∼100 nm in diameter can potentially cause toxicity in the central nervous system (CNS). Although NPs exhibit positive aspects, these molecules primarily exert negative or harmful effects. Thus, the beneficial and harmful effects should be compared. The prevalence of neurodegenerative diseases, such as Alzheimer disease, Parkinson disease, and some brain tumors, has increased. However, the major cause of these diseases remains unknown. NPs have been considered as one of the major potential causes of these diseases, penetrating the human body via different pathways. This review summarizes various pathways for NP-induced neurotoxicity, suggesting the development of strategies for nanoneuroprotection using in silico and biological methods. Studies of oxidative stress associated with gene expression analyses provide efficient information for understanding neuroinflammation and neurodegeneration associated with NPs. The brain is a sensitive and fragile organ, and evolution has developed mechanisms to protect it from injury; however, this protection also hinders the methods used for therapeutic purposes. Thus, brain and CNS-related diseases that are the cause of disability and disorder are the most difficult to treat. There are many obstacles to drug delivery in the CNS, such as the blood brain barrier and blood tumor barrier. Considering these barriers, we have reviewed the strategies available to map NPs using biological techniques. The surface adsorption energy of NPs is the basic force driving NP gathering, protein corona formation, and many other interactions of NPs within biological systems. These interactions can be described using an approach named the biological surface adsorption index. A quantitative structural activity relationship study helps to understand different protein-protein or protein-ligand interactions. Moreover, equilibrium between cerebrovascular permeability is required when a drug is transferred via the circulatory system for the therapy of neurodegenerative diseases. Various drug delivery approaches, such as chemical drug delivery and carrier-mediated drug delivery, have been established to avoid different barriers inhibiting CNS penetration by therapeutic substances. Developing an improved understanding of drug receptors and the sites of drug action, together with advances in medicinal chemistry, will make it possible to design drugs with greatly enhanced activity and selectivity; this may result in a significant increase in the therapeutic index.

Aggregate morphology of nano-TiO2: role of primary particle size, solution chemistry, and organic matter

A systematic investigation was conducted to understand the role of aquatic conditions on the aggregate morphology of nano-TiO2, and the subsequent impact on their fate in the environment. In this study, three distinctly sized TiO2 nanoparticles (6, 13, and 23 nm) that had been synthesized with flame spray pyrolysis were employed. Nanoparticle aggregate morphology was measured using static light scattering (SLS) over a wide range of solution chemistry, and in the presence of natural organic matter (NOM). Results showed that primary nanoparticle size can significantly affect the fractal dimension of stable aggregates. A linear relationship was observed between surface areas of primary nanoparticles and fractal dimension indicating that smaller primary nanoparticles can form more compact aggregate in the aquatic environment. The pH, ionic strength, and ion valence also influenced the aggregate morphology of TNPs. Increased pH resulted a decrease in fractal dimension, whereas higher ionic strength resulted increased fractal dimension particularly for monovalent ions. When NOM was present, aggregate fractal dimension was also affected, which was also notably dependent on solution chemistry. Fractal dimension of aggregate increase for 6 nm system in the presence of NOM, whereas a drop in fractal dimension was observed for 13 nm and 23 nm aggregates. This effect was most profound for aggregates comprised of the smallest primary particles suggesting that interactions of NOM with smaller primary nanoparticles are more significant than those with larger ones. The findings from this study will be helpful for the prediction of nanoparticle aggregate fate in the aquatic environment.

Physiological analysis of silver nanoparticles and AgNO3 toxicity to Spirodela polyrhiza

Silver nanoparticles (AgNPs) are commonly used in consumer products for their antibacterial activity. Silver nanoparticles may adversely influence organisms when released into the environment. The present study investigated the effect of AgNPs on the growth, morphology, and physiology of the aquatic plant duckweed (Spirodela polyrhiza). The toxicity of AgNPs and AgNO(3) was also compared. The results showed that silver content in plant tissue increased significantly with higher concentrations of AgNPs and AgNO(3) . Silver nanoparticles and AgNO(3) significantly decreased plant biomass, caused colonies of S. polyrhiza to disintegrate, and also resulted in root abscission. Physiological analysis showed that AgNPs and AgNO(3) significantly decreased plant tissue nitrate-nitrogen content, chlorophyll a (Chl a) content, chlorophyll a/b (Chl a/b), and chlorophyll fluorescence (Fv/Fm). Changes in soluble carbohydrate and proline content were also detected after both AgNO(3) and AgNPs treatment. However, after 192 h of recovery, total chlorophyll content increased, and Fv/Fm returned to control level. Median effective concentration (EC50) values for Chl a and phosphate content showed that AgNO(3) was more toxic than AgNPs (EC50 values: 16.10 ± 0.75 vs 7.96 ± 0.81 and 17.33 ± 4.47 vs 9.14 ± 2.89 mg Ag L(-1) , respectively), whereas dry-weight EC50 values showed that AgNPs were more toxic than AgNO(3) (13.39 ± 1.06 vs 17.67 ± 1.16 mg Ag L(-1) ).

Transport of two metal oxide nanoparticles in saturated granular porous media: role of water chemistry and particle coating

The growing use of nanosized titanium dioxide (nTiO2) and zinc oxide (nZnO) in a large number of commercial products raises concerns regarding their release and subsequent mobility in natural aquatic environments. Laboratory-scale sand-packed column experiments were conducted with bare and polymer-coated nTiO2 and nZnO to improve our understanding of the mobility of these nanoparticles in natural or engineered water saturated granular systems. The nanoparticles are characterized over a range of environmentally relevant water chemistries using multiple complimentary techniques: dynamic light scattering, nanoparticle tracking analysis, transmission electron microscopy, and scanning electron microscopy. Overall, bare (uncoated) nanoparticles exhibit high retention within the water saturated granular matrix at solution ionic strengths (IS) as low as 0.1 mM NaNO3 for bare nTiO2 and 0.01 mM NaNO3 for bare nZnO. Bare nTiO2 and nZnO also display dynamic (time-dependent) deposition behaviors under selected conditions. In contrast, the polymer-coated nanoparticles are much less likely to aggregate and exhibit significant transport potential at IS as high as 100 mM NaNO3 or 3 mM CaCl2. These findings illustrate the importance of considering the extent and type of surface modification when evaluating metal oxide contamination potential in granular aquatic environments.

New perspectives on nanomaterial aquatic ecotoxicity: production impacts exceed direct exposure impacts for carbon nanotoubes

Environmental impacts due to engineered nanomaterials arise both from releases of the nanomaterials themselves as well as from their synthesis. In this work, we employ the USEtox model to quantify and compare aquatic ecotoxicity impacts over the life cycle of carbon nanotubes (CNTs). USEtox is an integrated multimedia fate, transport, and toxicity model covering large classes of organic and inorganic substances. This work evaluates the impacts of non-CNT emissions from three methods of synthesis (arc ablation, CVD, and HiPco), and compares these to the modeled ecotoxicity of CNTs released to the environment. Parameters for evaluating CNT ecotoxicity are bounded by a highly conservative "worst case" scenario and a "realistic" scenario that draws from existing literature on CNT fate, transport, and ecotoxicity. The results indicate that the ecotoxicity impacts of nanomaterial production processes are roughly equivalent to the ecotoxicity of CNT releases under the unrealistic worst case scenario, while exceeding the results of the realistic scenario by 3 orders of magnitude. Ecotoxicity from production processes is dominated by emissions of metals from electricity generation. Uncertainty exists for both production and release stages, and is modeled using a combination of Monte Carlo simulation and scenario analysis. The results of this analysis underscore the contributions of existing work on CNT fate and transport, as well as the importance of life cycle considerations in allocating time and resources toward research on mitigating the impacts of novel materials.

Polymeric coatings on silver nanoparticles hinder autoaggregation but enhance attachment to uncoated surfaces

The propensity of silver nanoparticles (AgNPs) having two different polymer coatings (poly(vinylpyrrolidone), PVP, or gum arabic, GA) to aggregate, or to deposit to a reference surface (silica), was explored as a basis for differentiating the effect of surface coating on the stability of nanoparticles in aggregation and in deposition. Surface polymeric coatings stabilize nanoparticles against aggregation as shown by either an increased critical coagulation concentration as for PVP-coated AgNPs (AgPVP) or the absence of observable aggregation even at a high ionic strength as for GA-coated AgNPs (AgGA). In experiments of AgNPs deposition in a silica porous medium, dissimilar surfaces favored deposition, such as the case where polymer coatings were present on the AgNPs but were absent on the porous medium. The increased affinity of the AgNPs for the porous medium in this case may be explained by a shifted contact frontier where electrical double layer interaction is weaker. When coating polymers were introduced to the porous medium and allowed to preadsorb to the silica surfaces, the attachment efficiencies for both the AgPVP and AgGA were reduced due to steric and electrosteric stabilization, respectively. The results suggest that polymeric coatings that are usually deemed as stabilizers (as they indeed are in the case of autoaggregation) might not necessarily stabilize nanoparticles against deposition unless the collector surfaces are also coated with polymer.

A study of the mechanism of in vitro cytotoxicity of metal oxide nanoparticles using catfish primary hepatocytes and human HepG2 cells

Nanoparticles (NPs), including nanometal oxides, are being used in diverse applications such as medicine, clothing, cosmetics and food. In order to promote the safe development of nanotechnology, it is essential to assess the potential adverse health consequences associated with human exposure. The liver is a target site for NP toxicity, due to NP accumulation within it after ingestion, inhalation or absorption. The toxicity of nano-ZnO, TiO(2), CuO and Co(3)O(4) was investigated using a primary culture of channel catfish hepatocytes and human HepG2 cells as in vitro model systems for assessing the impact of metal oxide NPs on human and environmental health. Some mechanisms of nanotoxicity were determined by using phase contrast inverted microscopy, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays, reactive oxygen species (ROS) assays, and flow cytometric assays. Nano-CuO and ZnO showed significant toxicity in both HepG2 cells and catfish primary hepatocytes. The results demonstrate that HepG2 cells are more sensitive than catfish primary hepatocytes to the toxicity of metal oxide NPs. The overall ranking of the toxicity of metal oxides to the test cells is as follows: TiO(2)<Co(3)O(4)<ZnO<CuO. The toxicity is due not only to ROS-induced cell death, but also to damages to cell and mitochondrial membranes.

Coupling multi-criteria decision analysis, life-cycle assessment, and risk assessment for emerging threats

Emerging environmental threats such as novel chemical compounds, biological agents, and nanomaterials present serious challenges to traditional models of risk analysis and regulatory risk management processes. Even a massive expansion of risk and life-cycle assessment research efforts is unlikely to keep pace with rapid technological change resulting in new and modified materials with changing properties. Therefore, it is essential to have a framework for interpreting available information in the context of high uncertainty and a strategy for prioritizing research efforts to reduce those uncertainties that are most critical. We discuss how integrating the three analytic approaches of risk assessment, life-cycle assessment, and multicriteria decision analysis into a framework permits understanding uncertainty and prioritizes needs for scientific research. Our approach is illustrated with two separate cases: nanomaterials and contaminated sediment remediation.

Environmental risk analysis for nanomaterials: review and evaluation of frameworks

In response to the challenges of conducting traditional human health and ecological risk assessment for nanomaterials (NM), a number of alternative frameworks have been proposed for NM risk analysis. This paper evaluates various risk analysis frameworks proposed for NM based on a number of criteria. Among other results, most frameworks were found to be flexible for multiple NM, suitable for multiple decision contexts, included life cycle perspectives and precautionary aspects, transparent and able to include qualitative and quantitative data. Nevertheless, most frameworks were primarily applicable to occupational settings with minor environmental considerations, and most have not been thoroughly tested on a wide range of NM. Care should also be taken when selecting the most appropriate risk analysis strategy for a given risk context. Given this, we recommend a multi-faceted approach to assess the environmental risks of NM as well as increased applications and testing of the proposed frameworks for different NM.

Toxicity of nanocrystal quantum dots: the relevance of surface modifications

With the development of nanotechnology, nanometer-sized products smaller than several 100 nm have been applied for all areas of science and technology. The nanometer-sized products, including carbon nanotubes, fullerene derivatives, and nanocrystals made of various materials, are widely employed as novel tools in various fields, not only in material engineering, electronics, plastics, automobile, aviation, and aerospace industries, but also even in cellular biology, molecular biology, and basic and clinical medical fields. In particular, nanocrystal quantum dots (QDs) have been widely used in biological and medical studies because of their far brighter photoemission and photostability. The physical and chemical properties of QDs have been circumstantially investigated, but little is known about the potential harmful effects of QDs on human health. In addition to the physical and chemical properties of the QDs, their toxicity and biological behavior are generally regulated by three other conditions: (1) the QD core material itself, (2) the surface modifications of the QD, and (3) the external environmental condition of the QDs. We herein report on the in vitro and in vivo toxicity and biological behavior of nanocrystals such as QDs. Accumulating evidence suggests that the QD-capping material, rather than the core metalloid complex, is responsible for the majority of their toxicity and biological activity. For example, molecules covered with a toxic agent showed cytotoxicity, whereas QDs conjugated with biomolecules retained the biological effects of the conjugate.

Nanowastes and the environment: Potential new waste management paradigm

Recent exponential growth in the development of nanomaterials (NMs) and nanoproducts is premised on the provision of novel benefits to the society-through the exploitation of their unique industrial and biomedical applications like medical imaging, fabrics in textiles, tissue engineering, nanocomposites, bioremediation, and biomedicine. These NMs and nanoproducts have increased in quantity and volume from few kilograms to thousands of tonnes over the last fifteen to twenty years, and their uncontrolled release into the environment is anticipated to grow dramatically in future. However, their potential impacts to the biological systems are unknown. Among the key present challenges in the waste management sector include the emergence of nanowastes; however, the effectiveness and the capability of the current systems to handle them are yet to be established. Because of limited studies on nanowastes management, in this paper, three-fold objectives are pursued, namely; (i) to raise concerns related to the alarming increases of uncontrolled releases of NMs into the environment through nanowastes, (ii) examine the unique challenges nanowastes pose to the waste management systems-both from technological and legislative perspectives, and (iii) summarize results of the first nanowastes classification formalism in order to elucidate the potential challenges of waste streams containing nanoscale dimension materials to the present waste management paradigm. Finally, the article closes by summarizing several proactive steps of enhancing effective long-term and responsible management of nanowastes.

Active food packaging evolution: transformation from micro- to nanotechnology

Predicting which attributes consumers are willing to pay extra for has become straightforward in recent years. The demands for the prime necessity of food of natural quality, elevated safety, minimally processed, ready-to-eat, and longer shelf-life have turned out to be matters of paramount importance. The increased awareness of environmental conservation and the escalating rate of foodborne illnesses have driven the food industry to implement a more innovative solution, i.e. bioactive packaging. Owing to nanotechnology application in eco-favorable coatings and encapsulation systems, the probabilities of enhancing food quality, safety, stability, and efficiency have been augmented. In this review article, the collective results highlight the food nanotechnology potentials with special focus on its application in active packaging, novel nano- and microencapsulation techniques, regulatory issues, and socio-ethical scepticism between nano-technophiles and nano-technophobes. No one has yet indicated the comparison of data concerning food nano- versus micro-technology; therefore noteworthy results of recent investigations are interpreted in the context of bioactive packaging. The next technological revolution in the domain of food science and nutrition would be the 3-BIOS concept enabling a controlled release of active agents through bioactive, biodegradable, and bionanocomposite combined strategy.

An ecological perspective on nanomaterial impacts in the environment

Growing concerns over the potential for unintended, adverse consequences of engineered nanoparticles (ENPs) in the environment have generated new research initiatives focused on understanding the ecological effects of ENPs. Almost nothing is currently known about the fate and transport of ENPs in environmental waters, soils, and sediments or about the biological impacts of ENPs in natural environments, and the bulk of modern nanotoxicogical research is focused on highly controlled laboratory studies with single species in simple media. In this paper, we provide an ecological perspective on the current state of knowledge regarding the likely environmental impacts of nanomaterials and propose a strategy for making rapid progress in new research in ecological nanoscience.

Nano risk analysis: advancing the science for nanomaterials risk management

Scientists, activists, industry, and governments have raised concerns about health and environmental risks of nanoscale materials. The Society for Risk Analysis convened experts in September 2008 in Washington, DC to deliberate on issues relating to the unique attributes of nanoscale materials that raise novel concerns about health risks. This article reports on the overall themes and findings of the workshop, uncovering the underlying issues for each of these topics that become recurring themes. The attributes of nanoscale particles and other nanomaterials that present novel issues for risk analysis are evaluated in a risk analysis framework, identifying challenges and opportunities for risk analysts and others seeking to assess and manage the risks from emerging nanoscale materials and nanotechnologies. Workshop deliberations and recommendations for advancing the risk analysis and management of nanotechnologies are presented.

Environmental occurrences, behavior, fate, and ecological effects of nanomaterials: an introduction to the special series

The release of engineered nanomaterials (ENMs) into the biosphere will increase as industries find new and useful ways to utilize these materials. Scientists and engineers are beginning to assess the material properties that determine the fate, transport, and effects of ENMs; however, the potential impacts of released ENMs on organisms, ecosystems, and human health remain largely unknown. This special collection of four review papers and four technical papers identifies many key and emerging knowledge gaps regarding the interactions between nanomaterials and ecosystems. These critical knowledge gaps include the form, route, and mass of nanomaterials entering the environment; the transformations and ultimate fate of nanomaterials in the environment; the transport, distribution, and bioavailability of nanomaterials in environmental media; and the organismal responses to nanomaterial exposure and effects of nanomaterial inputs, on ecological communities and biogeochemical processes at relevant environmental concentrations and forms. This introductory section summarizes the state of knowledge and emerging areas of research needs identified within the special collection. Despite recent progress in understanding the transport, transformations, and fate of ENMs in model environments and organisms, there remains a large need for fundamental information regarding releases, distribution, transformations and persistence, and bioavailability of nanomaterials. Moreover, fate, transport, bioaccumulation, and ecological impacts research is needed using environmentally relevant concentrations and forms of ENMs in real field materials and with a broader range of organisms.

One-pot synthesis of fluorescent oligonucleotide Ag nanoclusters for specific and sensitive detection of DNA

In this study, we prepared fluorescent, functional oligonucleotide-stabilized silver nanoclusters (FFDNA-Ag NCs) through one-pot synthesis and then employed them as probes for single nucleotide polymorphisms (SNPs). The FFDNA-Ag NCs were obtained through the NaBH(4)-mediated reduction of AgNO(3) in the presence of a DNA strand having the sequence 5'-C(12)-CCAGATACTCACCGG-3'. The specific DNA scaffold combines a fluorescent base motif (C(12)) and a specific sequence (CCAGATACTCACCGG) that recognizes a gene for fumarylacetoacetate hydrolase (FAH). The sensing mechanism of our new probe is based on the FFDNA-Ag NCs having different stabilities (fluorescence intensities) in solutions containing 150 mM NaCl in the absence and presence of perfect match DNA (DNA(pmt)). Under the optimal conditions (150 mM NaCl, 20 mM phosphate solution, pH 7.0), the fluorescence ratios of the FFDNA-Ag NC probes in the presence and absence of DNA(pmt), plotted against the concentration of DNA(pmt), was linear over the range 25-1000 nM (R(2)=0.98), with a limit of detection (S/N=3) of 14 nM. This cost-effective and simple FFDNA-Ag NC probe is sensitive and selective for SNPs of a gene for FAH.

Weight of evidence approach for the relative hazard ranking of nanomaterials

In assessing hazard for human health posed by newly engineered nanomaterials (ENM), approaches such as Weight of Evidence (WOE) and expert judgment are required to develop conclusions about the hazard of ENM. This is because all factors affecting hazard are not currently well defined and are often subject to different interpretation. Here we report the application of a WOE procedure to assess the potential of ENM to cause harm for human health, by integrating and combining physicochemical properties of NM and toxicity data obtained within the EU-funded Particle Risk project. The procedure was applied to carbon black (CB), single-walled carbon nanotubes (SWNT), C60 fullerene and quantum dots (QD) ENM tested during the Particle Risk project. The results show that some of the investigated ENM present a relatively higher hazardousness level on the basis of the integration of their physicochemical properties and toxicological effects, and that their hazard may be ranked as follow: QD >> C60 > SWNT > CB. This case study shows the utility of WOE approach to obtain a hazard ranking of ENM.

Nanotechnology for Sustainable Water Treatment

As world water demand continues to grow there is a critical need to develop sustainable water treatment solutions. This chapter describes the potential for nanomaterials to improve the sustainability of water treatment. Nanomaterial-driven advances in disinfection, oxidation, membrane separation and groundwater remediation are discussed with a view towards their potential to improve existing technologies. Disinfection technologies include oligodynamic processes with silver nanoparticles to effectively inactivate microorganisms without disinfection byproducts being formed. Oxidation technologies include metal oxide semiconductors and fullerene-based sensitisers acting as light-driven catalysts. Membrane separation processes include the embedding of materials such as zeolites, carbon nanotubes and metal oxides to improve selectivity and reduce fouling. Remediation technologies include iron particles designed to target and transform waste compounds in situ. These and other emerging water treatment technologies must be assessed with life-cycle analysis to determine the full materials and embodied energy costs of acquiring raw materials, manufacturing, use and end of life for the materials contained within each process. These costs must be weighed against the potential benefits for water treatment to determine their sustainability.

A review of nanoparticle functionality and toxicity on the central nervous system

Although nanoparticles have tremendous potential for a host of applications, their adverse effects on living cells have raised serious concerns recently for their use in the healthcare and consumer sectors. As regards the central nervous system (CNS), research data on nanoparticle interaction with neurons has provided evidence of both negative and positive effects. Maximal application dosage of nanoparticles in materials to provide applications such as antibacterial and antiviral functions is approximately 0.1-1.0 wt%. This concentration can be converted into a liquid phase release rate (leaching rate) depending upon the host or base materials used. For example, nanoparticulate silver (Ag) or copper oxide (CuO)-filled epoxy resin demonstrates much reduced release of the metal ions (Ag(+) or Cu(2+)) into their surrounding environment unless they are mechanically removed or aggravated. Subsequent to leaching effects and entry into living systems, nanoparticles can also cross through many other barriers, such as skin and the blood-brain barrier (BBB), and may also reach bodily organs. In such cases, their concentration or dosage in body fluids is considered to be well below the maximum drug toxicity test limit (10(-5) g ml(-1)) as determined in artificial cerebrospinal solution. As this is a rapidly evolving area and the use of such materials will continue to mature, so will their exposure to members of society. Hence, neurologists have equal interests in nanoparticle effects (positive functionality and negative toxicity) on human neuronal cells within the CNS, where the current research in this field will be highlighted and reviewed.

A review of nanoparticle functionality and toxicity on the central nervous system

Although nanoparticles have tremendous potential for a host of applications, their adverse effects on living cells have raised serious concerns recently for their use in the healthcare and consumer sectors. As regards the central nervous system (CNS), research data on nanoparticle interaction with neurons has provided evidence of both negative and positive effects. Maximal application dosage of nanoparticles in materials to provide applications such as antibacterial and antiviral functions is approximately 0.1-1.0 wt%. This concentration can be converted into a liquid phase release rate (leaching rate) depending upon the host or base materials used. For example, nanoparticulate silver (Ag) or copper oxide (CuO)-filled epoxy resin demonstrates much reduced release of the metal ions (Ag(+) or Cu(2+)) into their surrounding environment unless they are mechanically removed or aggravated. Subsequent to leaching effects and entry into living systems, nanoparticles can also cross through many other barriers, such as skin and the blood-brain barrier (BBB), and may also reach bodily organs. In such cases, their concentration or dosage in body fluids is considered to be well below the maximum drug toxicity test limit (10(-5) g ml(-1)) as determined in artificial cerebrospinal solution. As this is a rapidly evolving area and the use of such materials will continue to mature, so will their exposure to members of society. Hence, neurologists have equal interests in nanoparticle effects (positive functionality and negative toxicity) on human neuronal cells within the CNS, where the current research in this field will be highlighted and reviewed.

Rapid determination of the toxicity of quantum dots with luminous bacteria

In this paper, a novel method so-called bioluminescence inhibition assay with luminous bacteria (Photobacterium phosphoreum) was introduced to evaluate the toxicity of quantum dots. The bioassay was based on measuring the decrease of the light emitted by luminous bacteria. With obvious advantages of simplicity, rapidity and sensitivity, it can dramatically improve the efficiency of probing the toxicity of QDs. Based on this method, we systemically explored the effect of the composition and surface modification on QDs' toxicity. The experiment of composition effect was performed using three kinds of QDs, namely CdSe, CdTe and ZnS-AgInS(2) QDs with the same stabilizer - dihydrolipoic acid. As for the effect of different stabilizers, mercaptoacetic acid, l-cysteine and dihydrolipoic acid stabilized CdSe were researched, respectively. Our results demonstrated that both the composition and surface modification were the important factors affecting the toxicity of QDs. In addition, a concentration dependence of toxicity was also found.

Rapid determination of nanotoxicity using luminous bacteria

A new luminescence-based toxicity test using luminous bacteria as a reporting agent has been developed to determine EC(50) of different nanomaterials, such as gold nanoparticles and carbon nanotubes on living organisms. The whole assay takes only about 15 min and is as sensitive as other standard methods. Due to its technical simplicity, rapidity and sensitivity, this luminescent bacteria test has the potential to be developed as a general test of toxicity for a wide variety of nanomaterials.

An evidence-based environmental perspective of manufactured silver nanoparticle in syntheses and applications: a systematic review and critical appraisal of peer-reviewed scientific papers

BACKGROUND

Most recently, renewed interest has arisen in manufactured silver nanomaterials because of their unusually enhanced physicochemical properties and biological activities compared to the bulk parent materials. A wide range of applications has emerged in consumer products ranging from disinfecting medical devices and home appliances to water treatment. Because the hypothesized mechanisms that govern the fate and transport of bulk materials may not directly apply to materials at the nanoscale, there are great concerns in the regulatory and research communities about potential environmental impacts associated with the use of silver nanoparticles. In particular, the unlimited combinations of properties emerging from the syntheses and applications of silver nanoparticles are presenting an urgent need to document the predominant salt precursors, reducing agents and stabilizing agents utilized in the synthesis processes of silver nanoparticles to guide the massive efforts required for environmental risk assessment and management.

OBJECTIVES

The primary objective of this study is to present an evidence-based environmental perspective of silver nanoparticle properties in syntheses and applications. The following specific aims are designed to achieve the study objective: Aim 1--to document the salt precursors and agents utilized in synthesizing silver nanoparticles; Aim 2--to determine the characteristics of silver nanoparticles currently in use in the scientific literature when integrated in polymer matrices to form nanocomposites and combined with other metal nanoparticles to form bimetallic nanoparticles; Aim 3--to provide a summary of the morphology of silver nanoparticles; and (4) Aim 4--to provide an environmental perspective of the evidence presented in Aims 1 to 3.

METHODS

A comprehensive electronic search of scientific databases was conducted in support of the study objectives. Specific inclusion criteria were applied to gather the most pertinent research articles. Data and information extraction relied on the type of synthesis methods, that is, synthesized silver nanoparticles in general and specific applications, nanocomposites, and bimetallic techniques. The following items were gathered for: type of silver salt, solvent, reducing agent, stabilizing agent, size, and type of application/nanocomposite/bimetallic, and template (for nanocomposites). The description of evidence was presented in tabular format. The critical appraisal was analyzed in graphical format and discussed.

RESULTS

An analysis of the scientific literature suggests that most synthesis processes produce spherical silver nanoparticles with less than 20nm diameter. Silver nanoparticles are often synthesized via reduction of AgNO(3), dissolution in water, and utilization of reductants also acting as capping or stabilizing agents for the control of particle size to ensure a relatively stable suspension. Two of the most commonly used reductants and stabilizing agents are NaBH(4) and citrate which yield particles with a negative surface charge over the environmental pH range (3-10). The environmental perspectives of these parameters are discussed.

CONCLUDING REMARKS

It is expected that the antibacterial property of bulk silver is carried over and perhaps enhanced, to silver nanoparticles. Therefore, when one examines the environmental issues associated with the manufacture and use of silver nanoparticle-based products, the antibacterial effects should always be taken into account particularly at the different stages of the product lifecycle. Currently, there are two arguments in the scientific literature about the mechanisms of antimicrobial properties of silver nanoparticles as they relate to colloidal silver particles and inonic silver. Methodologies of risk assessment and control have to account for both arguments.

Adsorption of atrazine by natural organic matter and surfactant dispersed carbon nanotubes

The aggregation and dispersion behaviors of carbon nanotubes (CNTs) can regulate the environmental spread and fate of CNTs, as well as the organic pollutants adsorbed onto them. In this study, multi-walled carbon nanotubes (MWNTs) and single-walled carbon nanotubes (SWNTs) were surface modified with humic acids from different sources and with surfactants of different ionic types. The dispersion stability of surface modified CNTs was observed by UV-Vis spectrophotometry. The effect of humic acid and surfactant dispersion on the adsorption of atrazine by CNTs was investigated by batch equilibrium experiments. Both humic acid and surfactant could effectively disperse MWNTs, but not SWNTs, into stable suspensions under the studied conditions. Surface modified CNTs had a greatly reduced capacity for adsorption of atrazine. The inhibitory effect of peat humic acid was relatively stronger than that of soil humic acid, but the two surfactants had a similar inhibitory effect on atrazine adsorption by the two CNT types. Increases in surfactant concentration resulted in rapid decreases in the adsorption of atrazine by CNTs when the surfactant concentration was less than 0.5 critical micelle concentration.

Early evaluation of potential environmental impacts of carbon nanotube synthesis by chemical vapor deposition

The carbon nanotube (CNT) industry is expanding rapidly, yet little is known about the potential environmental impacts of CNT manufacture. Here, we evaluate the effluent composition of a representative multiwalled CNT synthesis by catalytic chemical vapor deposition (CVD) in order to provide data needed to design strategies for mitigating any unacceptable emissions. During thermal pretreatment of the reactant gases (ethene and H(2)), we found over 45 side-products were formed, including methane, volatile organic compounds (VOCs), and polycyclic aromatic hydrocarbons (PAHs). This finding suggests several environmental concerns with the existing process, including potential discharges of the potent greenhouse gas, methane (up to 1.7%), and toxic compounds such as benzene and 1,3-butadiene (up to 36000 ppmv). Extrapolating these laboratory-scale data to future industrial CNT production, we estimate that (1) contributions of atmospheric methane will be negligible compared to other existing sources and (2) VOC and PAH emissions may become important on local scales but will be small when compared to national industrial sources. As a first step toward reducing such unwanted emissions, we used continuous in situ measures of CNT length during growth and sought to identify which thermally generated compounds correlated with CNT growth rate. The results suggested that, in future CNT production approaches, key reaction intermediates could be delivered to the catalyst without thermal treatment. This would eliminate the most energetically expensive component of CVD synthesis (heating reactant gases), while reducing the formation of unintended byproducts.

Decreasing uncertainties in assessing environmental exposure, risk, and ecological implications of nanomaterials

Determining the fate and interactions of nanomaterials in complex environmental contexts is required to assess exposure and possible harm as well as to inform regulation. As the nanotechnology industry moves up into the rarified air of trillion dollar economics over the next several years (1), the number of simple and complex manufactured nanomaterials (NMs), and their uses, will grow tremendously. Large-scale production of engineered NMs presents the possibility that organisms and ecosystems may be exposed to new levels and qualities of substances with unknown consequences. Naturally occurring nanoscale materials are also ubiquitous in the biosphere, comprising the very building blocks of life and likely playing an important role in ecosystem

Transfer of gold nanoparticles from the water column to the estuarine food web

Within the next five years the manufacture of large quantities of nanomaterials may lead to unintended contamination of terrestrial and aquatic ecosystems. The unique physical, chemical and electronic properties of nanomaterials allow new modes of interaction with environmental systems that can have unexpected impacts. Here, we show that gold nanorods can readily pass from the water column to the marine food web in three laboratory-constructed estuarine mesocosms containing sea water, sediment, sea grass, microbes, biofilms, snails, clams, shrimp and fish. A single dose of gold nanorods (65 nm length x 15 nm diameter) was added to each mesocosm and their distribution in the aqueous and sediment phases monitored over 12 days. Nanorods partitioned between biofilms, sediments, plants, animals and sea water with a recovery of 84.4%. Clams and biofilms accumulated the most nanoparticles on a per mass basis, suggesting that gold nanorods can readily pass from the water column to the marine food web.

Zebrafish as a correlative and predictive model for assessing biomaterial nanotoxicity

The lack of correlative and predictive models to assess acute and chronic toxicities limits the rapid pre-clinical development of new therapeutics. This barrier is due in part to the exponential growth of nanotechnology and nanotherapeutics, coupled with the lack of rigorous and robust screening assays and putative standards. It is a fairly simple and cost-effective process to initially screen the toxicity of a nanomaterial by using invitro cell cultures; unfortunately it is nearly impossible to imitate a complimentary invivo system. Small mammalian models are the most common method used to assess possible toxicities and biodistribution of nanomaterials in humans. Alternatively, Daniorerio, commonly known as zebrafish, are proving to be a quick, cheap, and facile model to conservatively assess toxicity of nanomaterials.

Mechanisms for strong adsorption of tetracycline to carbon nanotubes: a comparative study using activated carbon and graphite as adsorbents

Significant concerns have been raised over the presence of antibiotics including tetracyclines in aquatic environments. We herein studied single-walled carbon nanotubes (SWNT) and multi-walled carbon nanotubes (MWNT) as potential effective adsorbents for removal of tetracycline from aqueous solution. In comparison, a nonpolar adsorbate, naphthalene, and two other carbonaceous adsorbents, pulverized activated carbon (AC) and nonporous graphite, were used. The observed adsorbent-to-solution distribution coefficient (Kd, L/kg) of tetracycline was in the order of 10(4)-10(6) L/kg for SWNT, 10(3)-10(4) L/kg for MWNT, 10(3)-10(4) L/kg for AC, and 10(3)-10(5) L/kg for graphite. Upon normalization for adsorbent surface area, the adsorption affinity of tetracycline decreased in the order of graphite/ SWNT > MWNT >> AC. The weaker adsorption of tetracycline to AC indicates that for bulky adsorbates adsorption affinity is greatly affected by the accessibility of available adsorption sites. The remarkably strong adsorption of tetracycline to the carbon nanotubes and to graphite can be attributed to the strong adsorptive interactions (van der Waals forces, pi-pi electron-donor-acceptor interactions, cation-pi bonding) with the graphene surface. Complexation between tetracycline and model graphene compounds (naphthalene, phenanthrene, pyrene) in solution phase was verified by ring current-induced 1H NMR upfield chemical shifts of tetracycline moieties.