Selective removal of copper(II) from natural waters by nanoporous sorbents functionalized with chelating diamines

Integration of metal organic framework nanoparticles into sodium alginate biopolymer-based three-dimensional membrane capsules for the efficient removal of toxic metal cations from water and real sewage

Sodium alginate (SA) biopolymer has been recognized as an efficient adsorbent material owing to their unique characteristics, including biodegradability, non-toxic nature, and presence of abundant hydrophilic functional groups. Accordingly, in the current research work, UiO-66-OH and UiO-66-(OH)2 metal organic framework (MOF) nanoparticles (NPs) have been integrated into SA biopolymer-based three-dimensional (3-D) membrane capsules (MCs) via a simple and facile approach to remove toxic metal cations (Cu2+ and Cd2+) from water and real sewage. The newly configured capsules were characterized by FTIR, SEM, XRD, EDX and XPS analyses techniques. Exceptional sorption properties of the as-developed capsules were ensured by evaluation of the pertinent operational parameters, i.e., contents of MOF-NPs (1-100 wt%), adsorbent dosage (0.001-0.05 g), content time (0-360 h), pH (1-8), initial concentration of metal cations (5-1000 mg/L) and reaction temperature (298.15-333.15 K) on the eradication of Cu2+ and Cd2+ metal cations. It was found that hydrophilic functional groups (-OH and -COOH) have performed an imperative role in the smooth loading of MOF-NPs into 3-D membrane capsules via intra/inter-molecular hydrogen bonding and van der waals potencies. The maximum monolayer uptake capacities (as calculated by the Langmuir isotherm model) of Cd2+ and Cu2+ by 3-D SGMMCs-OH were 940 and 1150 mg/g, respectively, and by 3-D SGMMCs-(OH)2 were 1375 and 1575 mg/g, respectively, under optimum conditions. The as-developed capsules have demonstrated superior selectivity against targeted metal cations under designated pH and maintained >80 % removal efficiency up to six consecutive treatment cycles. Removal mechanisms of metal cations by the 3-D SGMMCs-OH/(OH)2 was proposed, and electrostatic interaction, ion-exchange, inner-sphere coordination bonds/interactions, and aromatic ligands exchange were observed to be the key removal mechanisms. Notably, FTIR and XPS analysis indicated that hydroxyl groups of Zr-OH and BDC-OH/(OH)2 aromatic linkers played vital roles in Cu2+ and Cd2+ adsorption by participating in inner-sphere coordination interactions and aromatic ligands exchange mechanisms. The as-prepared capsules indicated >70 % removal efficiency of Cu2+ from real electroplating wastewater in the manifestation of other competitive metal ions and pollutants under selected experimental conditions. Thus, it was observed that newly configured 3-D SGMMCs-OH/(OH)2 have offered a valuable discernment into the development of MOFs-based water decontamination 3-D capsules for industrial applications.

Systematic investigation of simultaneous copper biosorption and nitrogen removal from wastewater by an aerobic denitrifying bacterium of auto-aggregation

Finding effective methods for simultaneous removal of eutrophic nutrients and heavy metals has attracted increasing concerns for the environmental remediation. Herein, a novel auto-aggregating aerobic denitrifying strain (Aeromonas veronii YL-41) was isolated with capacities for copper tolerance and biosorption. The denitrification efficiency and nitrogen removal pathway of the strain were investigated by nitrogen balance analysis and amplification of key denitrification functional genes. Moreover, the changes in the auto-aggregation properties of the strain caused by extracellular polymeric substances (EPS) production were focused on. The biosorption capacity and mechanisms of copper tolerance during denitrification were further explored by measuring changes in copper tolerance and adsorption indices, as well as by variations in extracellular functional groups. The strain showed extremely strong total nitrogen removal ability, with 67.5%, 82.08% and 78.48% of total nitrogen removal when NH4+-N, NO2--N, and NO3--N were used as the only initial nitrogen source, respectively. The successful amplification of napA, nirK, norR, and nosZ genes further demonstrated that the strain accomplished nitrate removal through a complete aerobic denitrification pathway. The production of protein-rich EPS of up to 23.31 mg/g and an auto-aggregation index of up to 76.42% may confer a strong biofilm-forming potential to the strain. Under the stress of 20 mg/L copper ions, the removal of nitrate-nitrogen was still as high as 71.4%. In addition, the strain could achieve an efficient removal of 96.9% of copper ions at an initial concentration of 80 mg/L. Scanning electron microscopy and deconvolution analysis of characteristic peaks confirmed that the strains encapsulate heavy metals by secreting EPS and, meanwhile, form strong hydrogen bonding structures to enhance intermolecular forces to resist copper ion stress. This study provides an innovative and effective biological approach for the synergistic bioaugmentation removal of eutrophic substances and heavy metals from aquatic environments.

Removal of Cadmium(II) by hydrated manganese dioxide: behaviour and mechanism at different pH

Homogeneous precipitation was proposed to prepare hydrated manganese dioxide (HMO) with KMnO4 as oxidant, NaCl as reductant and HNO3 as reaction auxiliary. HMO was applied to remove Cd(II) and the effect of contact time, initial concentration, adsorbent dose and pH value on adsorption efficiency were investigated. The removal mechanisms at various pH values were analysed in detail. Adsorption thermodynamics parameters were calculated as ΔG < 0, ΔH > 0 and ΔS > 0, which meant that the adsorption process was endothermic. The result of adsorption kinetics indicated the adsorption process conformed to pseudo-second-order kinetics. When adsorbing Cd(II) with initial concentration equaling 100 mg·L-1, the activation energy (Ea) was 62.740 kJ·mol-1. The Langmuir model could describe adsorption behaviour on HMO better than the Freundlich model, indicating that the adsorption sites of HMO were homogeneous and that single-layer adsorption was a dominant way in this process. The maximum adsorption capacity of Cd(II) on MnO2 calculated by the Langmuir model was 267 mg·g-1. The adsorbent HMO could be recycled and reused for several times with a high efficiency above 70% by adding HCl. SEM, EDS, FTIR and XPS were used to analyse the mechanisms of removal of Cd(II) at pH = 3,7 and 10. The mechanisms included electrostatic attraction, ion exchange and chemical precipitation. With pH increasing, the zeta potential decreased and the surface negative charge increased, promoting Cd(II) removal through enhanced electrostatic attraction. Meanwhile, ion exchange mechanisms including inner-sphere complexation and outer-sphere complexation occurred during adsorption process at different pH.

Amino-Functionalized Hierarchical Porous Carbon Derived from Zeolitic Imidazolate Frameworks for Ultrasensitive Electrochemical Sensing of Heavy Metals in Water

Electrochemical sensing provides a feasible avenue to monitor heavy metal ions (HMIs) in water, whereas the construction of highly sensitive and selective sensors remains challenging. Herein, we fabricated a novel amino-functionalized hierarchical porous carbon by the template-engaged method using ZIF-8 as the precursor and polystyrene sphere as the template, followed by carbonization and controllable chemical grafting of amino groups for efficient electrochemical detection of HMIs in water. The amino-functionalized hierarchical porous carbon features an ultrathin carbon framework with a high graphitization degree, excellent conductivity, unique macro-, meso-, and microporous architecture, and rich amino groups. As a result, the sensor exhibits prominent electrochemical performance with significantly low limits of detection for individual HMIs (i.e., 0.93 nM for Pb²⁺, 2.9 nM for Cu²⁺, and 1.2 nM for Hg²⁺) and simultaneous detection of HMIs (i.e., 0.62 nM for Pb²⁺, 1.8 nM for Cu²⁺, and 0.85 nM for Hg²⁺), which are superior to most reported sensors in the literature. Moreover, the sensor displays excellent anti-interference ability, repeatability, and stability for HMI detection in actual water samples.

Application of nano remediation of mine polluted in acid mine drainage water using machine learning model

Acid mine drainage (AMD) is the term used to describe drainage from coal mines with high sulfur-bearing rocks. The oxidative weathering of metal sulfides leads to AMD. The acidic environment corrodes more harmful compounds in the soil, which is spread throughout the working area. One such significant metal is copper, which is extracted in massive quantities from ores rich in sulfide. A copper-extraction resin might be created by combining diatomaceous earth (DE) particles with polyethyleneimine (PEI), which is shown to have great selectivity and affinity for copper. In this effort, PEI-DE particles' copper absorption level was examined by using synthetic and actual acid mine drainage samples at varied pH values. The findings of the copper uptake particles have been examined through the Support Vector Machine (SVM) model. Using the n-fold 14 cross-validation approach, the quantities of parameters and C are estimated to be 0.001 and 0.01, respectively. The SVM analysis was correct, and the findings indicated that copper could bind to the material efficiently and preferentially at pH 4. Subsequent water elution studies at a pH value of 1 confirmed the pH-reliant interaction between dissolved Cu and PEI by demonstrating full release of the adsorbed Cu. In this research, the copper absorption of PEI-DE particles from synthetic and genuine AMD specimens was studied based on several pH conditions. The findings suggest that copper may attach to the material effectively and preferentially at pH 4. Studies of filtering water at pH1 later confirmed that all of the adsorbed Cu was released. This shows that the interaction between PEI and dissolved Cu depends on PH.

Development of novel MOF-mixed matrix three-dimensional membrane capsules for eradicating potentially toxic metals from water and real electroplating wastewater

The stability and applicability of UiO-66-(NH₂)₂ metal-organic framework (MOF) nanoparticles (NPs) were successfully improved in this study by incorporating them into alginate biopolymer during the manifestation of crosslinking agents-calcium chloride and glutaraldehyde-via a simple, environment-friendly, and facile approach to eradicate potentially toxic metals (PTMs) such as Cr⁶⁺, Cr³⁺, Cu²⁺, and Cd²⁺ from water and real electroplating wastewater. Hydrophilic functional groups (i.e., -OH, -COOH, and -NH₂) are imperative in the smooth loading of UiO-66-(NH₂)₂ MOF- NPs into three-dimensional (3-D) membrane capsules (MCs). The X-ray photoelectron spectroscopy (XPS) results suggested that UiO-66-(NH₂)₂ MOF was effectively bonded in/on the capsule via electrostatic crosslinking between -H₃N⁺ and -COO^-. Scanning electron microscopy results revealed a porous honeycomb configuration of the 3-D SGMMCs (S: sodium alginate, G: glutaraldehyde, M: MOF NPs, and MCs: membrane capsules). The maximum monolayer absorption capacities for Cr⁶⁺, Cr³⁺, Cu²⁺, and Cd²⁺ were 495, 975, 1295, and 1350 mg/g, respectively. The results of Fourier transform infrared spectroscopy and XPS analyses showed that electrostatic attraction and ion exchange were the main processes for PTM removal used by the as-developed 3-D SGMMCs. The as-developed 3-D SGMMCs exhibited outstanding selectivity for removing the targeted PTMs under the specified pH/conditions and maintained >80% removal efficiency for up to six consecutive treatment cycles. Notably, > 60% removal efficiencies for Cr⁶⁺ and Cu²⁺ were observed when treating real electroplating wastewater. Therefore, the as-developed 3-D SGMMCs can be used as an exceptional multifunctional sorbent to remove and recover PTMs from real electroplating wastewater.

Stable and reusable acrylic ion-exchangers. From HMIs highly polluted tailing pond to safe and clean water

The application of several ion-exchange resins (IExR) with amino and amphoteric functionalities in batch retention of heavy metal ions (HMIs) (Cu(II), Fe(II), Mn(II), Zn(II)) from mono- and multicomponent simulated waters and from real polluted water collected from tailings pond of Tarnita (Suceava, Romania) sterile dump is deeply herein explored. The tested resins exhibited high sorption capacities, as evaluated by atomic absorption spectrometry, results supported by infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy. The effect of pH on the IExR sorption capacity in competitive condition evidenced the optimum pH where IExR sorption efficiency is maximum. Reutilization of IExR in six consecutive sorption/desorption/regeneration cycles showed their renewable sorption properties. Wheat germination tests demonstrated that the Tarnita collected water had a high toxic effect whereas the resulted supernatant after batch sorption was nontoxic. The study shows that HMIs content after IExR sorption is under the admitted maximum level for surface water, and represents an important step on the efforts to solve the environmental problem in Tarnita area, by removing the main contaminants found in the local river water.

Synthesis of graphene oxide/polyethyleneimine sponge and its performance in the sustainable removal of Cu(II) from water

Modification of graphene oxide (GO) with polyethyleneimine (PEI) has been studied to develop a GO/PEI sponge material that not only performs well in the adsorption of Cu(II) but also is easily separated from water. The results showed that GO had excellent affinity for PEI, and GO/PEI prepared at pH 9.0 using PEI with a MW of 70,000 was shown to be a good adsorbent for Cu(II). This GO/PEI was characterized with SEM, XRD, XPS, FTIR and TG analyses and was investigated for Cu(II) adsorption further. The adsorption isotherm data of Cu(II) were fitted well with the Langmuir model, from which the maximum adsorption of GO/PEI was calculated to be 150.9 mg/g at pH 5.5. This was much higher than that of GO and two commercial resins. GO/PEI showed high selectivity towards Cu(II). In GO/PEI, the contributions of amino groups on PEI and negative charges on GO were 79.2% and 20.8%, respectively. Cu(II) adsorption on GO/PEI decreased with decreasing pH, and 1 M HCl caused nearly complete desorption of the adsorbed Cu(II). Experimental results of five cycles of adsorption-desorption indicated that this material could be reused. Column studies showed that GO/PEI performed well in terms of both Cu(II) adsorption and stability in water.

Preparation and Characterization of a Novel Amidoxime-Modified Polyacrylonitrile/Fly Ash Composite Adsorbent and Its Application to Metal Wastewater Treatment

The polyacrylonitrile/fly ash composite was synthesized through solution polymerization and was modified with NH2OH·HCl. The amidoxime-modified polyacrylonitrile/fly ash composite demonstrated excellent adsorption capacity for Zn2+ in an aqueous medium. Fourier transform-Infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption, X-ray diffraction, and scanning electron microscopy were used to characterize the prepared materials. The results showed that the resulting amidoxime-modified polyacrylonitrile/fly ash composite was able to effectively remove Zn2+ at pH 4-6. Adsorption of Zn2+ was hindered by the coexisting cations. The adsorption kinetics of Zn2+ by Zn2+ followed the pseudo-second order kinetic model. The adsorption process also satisfactorily fit the Langmuir model, and the adsorption process was mainly single layer. The Gibbs free energy ΔG0, ΔH0, and ΔS0 were negative, indicating the adsorption was a spontaneous, exothermic, and high degree of order in solution system.

Insights into Sorption-Mineralization Mechanism for Sustainable Granular Composite of MgO-CaO-Al2O3-SiO2-CO2 Based on Nanosized Adsorption Centers and Its Effect on Aqueous Cu(II) Removal

Although copper is needed for living organisms at low concentrations, it is one of the pollutants that should be monitored along with other heavy metals. A novel and sustainable composite mineralizing sorbent based on MgO-CaO-Al₂O₃-SiO₂-CO₂ with nanosized adsorption centers was synthesized using natural calcium-magnesium carbonates and clay aluminosilicates for copper sorption. An organometallic modifier was added as a temporary binder and a source of inovalent ions participating in the reactions of defect formation and activated sintering. The sorbent-mineralizer samples of specified composition and properties showed irreversible sorption of Cu²⁺ ions by the ion exchange reactions Ca²⁺ ↔ Cu²⁺ and Mg²⁺ ↔ Cu²⁺. The topochemical reactions of the ion exchange 2OH^- → CO₃^2-, 2OH^- → SO₄^2- and CO₃^2- → SO₄^2- occurred at the surface with formation of the mixed calcium-copper carbonates and sulfates structurally connected with aluminosilicate matrix. The reverse migration of ions to the environment is blocked by the subsequent mineralization of the newly formed interconnected aluminosilicate and carbonate structures.

Extracellular Polymeric Substances Facilitate the Adsorption and Migration of Cu2+ and Cd2+ in Saturated Porous Media

Heavy metal contamination in groundwater is a serious environmental problem. Many microorganisms that survive in subsurface porous media also produce extracellular polymeric substances (EPS), but little is known about the effect of these EPS on the fate and transport of heavy metals in aquifers. In this study, EPS extracted from soil with a steam method were used to study the adsorption behaviors of Cu²⁺ and Cd²⁺, employing quartz sand as a subsurface porous medium. The results showed that EPS had a good adsorption capacity for Cu²⁺ (13.5 mg/g) and Cd²⁺ (14.1 mg/g) that can be viewed using the Temkin and Freundlich models, respectively. At a pH value of 6.5 ± 0.1 and a temperature of 20 °C, EPS showed a greater affinity for Cu²⁺ than for Cd²⁺. The binding force between EPS and quartz sand was weak. The prior saturation of the sand media with EPS solution can significantly promote the migration of the Cu²⁺ and Cd²⁺ in sand columns by 8.8% and 32.1%, respectively. When treating both metals simultaneously, the migration of Cd²⁺ was found to be greater than that of Cu²⁺. This also demonstrated that EPS can promote the co-migration of Cu²⁺ and Cd²⁺ in saturated porous media.

Highly Efficient Removal of Cu(II) Ions from Acidic Aqueous Solution Using ZnO Nanoparticles as Nano-Adsorbents

Water pollution by heavy metals has significant effects on aquatic ecosystems. Copper is one of the heavy metals that can cause environmental pollution and toxic effects in natural waters. This encourages the development of better technological alternatives for the removal of this pollutant. This work explores the application of ZnO nanoparticles (ZnO-NPs) for the removal of Cu(II) ions from acidic waters. ZnO NPs were characterized and adsorption experiments were performed under different acidic pHs to evaluate the removal of Cu(II) ions with ZnO NPs. The ZnO NPs were chemically stable under acidic conditions. The adsorption capacity of ZnO NPs for Cu(II) was up to 47.5 and 40.2 mg·g−1 at pH 4.8 and pH 4.0, respectively. The results revealed that qmax (47.5 mg·g−1) and maximum removal efficiency of Cu(II) (98.4%) are achieved at pH = 4.8. In addition, the surface roughness of ZnO NPs decreases approximately 70% after adsorption of Cu(II) at pH 4. The Cu(II) adsorption behavior was more adequately explained by Temkin isotherm model. Additionally, adsorption kinetics were efficiently explained with the pseudo-second-order kinetic model. These results show that ZnO NPs can be an efficient alternative for the removal of Cu(II) from acidic waters and the adsorption process was more efficient under pH = 4.8. This study provides new information about the potential application of ZnO NPs as an effective adsorbent for the remediation and treatment of acidic waters contaminated with Cu(II).

Low-Fe(III) driven UV/Air process for enhanced recovery of heavy metals from EDTA complexed system

The efficient recovery of heavy metals from complexed wastewater is an essential but challenging task. In this study, a novel low-Fe(III) driven UV/Air process (LFUA) was developed to break the strong complexation between ethylenediamine tetracetic acid (EDTA) and heavy metal ions (HMIs) and enable the enhanced recovery of HMIs via chelating resin adsorption (CRA). The inside mechanism of the LFUA process includes: 1) displacement of HMIs from HMI-EDTA complexes by Fe(III); 2) direct photolysis of Fe(III)-EDTA through a ligand-to-metal charge transition reaction (LMCT) and indirect photolysis of EDTA by HO₂·/O₂·^-. The iron dosage was orders of magnitude lower than that previously reported, due to the Fe(II)/Fe(III) redox cycle in the LFUA process. Fe(II) formed during the LMCT reaction of Fe(III)-EDTA was oxidized back to Fe(III) by O₂ and HO₂·, and the reformed Fe(III) was then recombined with EDTA to sustains the LMCT reaction. EDTA was completely removed in 20 min at a molar ratio of Fe(III)/EDTA = 0.05. In addition, following the LFUA process, the adsorption amounts of various HMIs onto D463 resin were at least two orders of magnitude higher than those reported using the direct adsorption process. Employing the integrated technique of LFUA + CRA enabled the efficient removal of up to 64.5 mg/L of Cu(II) from inlet wastewater, and residual Cu(II) was below 0.5 mg/L. The results of desorption experiments showed that over 90% of Cu(II) was recovered, and the desorption solution had a Cu concentration of 2.1 g/L and purity of 99%. Furthermore, the economic and practical feasibility of using the combined process of LFUA + CRA was analyzed to substantiate that the technique is highly efficient and clean (produces no harmful sludge). Therefore, it is an appropriate and practical process in removing HMIs-EDTA complexes and recovering HMIs from wastewater.

Heterogeneous Electro-Fenton catalysis with HKUST-1-derived Cu@C decorated in 3D graphene network

Transition metal and nanocarbon-based composites with high activity and stability draw great attention in electro-Fenton system for organic pollutants removal. In this study, HKUST-1-derived Cu@C nanoparticles embedded within three-dimensional reduced graphene oxide (rGO) network (denoted as 3DG/Cu@C) is synthesized through a simple strategy. The prepared catalyst shows ordered 3D porous carbon structure and Cu@C NPs are uniformly dispersed in the matrix. The 3DG/Cu@C is used as heterogeneous electro-Fenton (hetero-EF) catalyst and shows outstanding performance in various persistent organic pollutants removal. High concentration Rhodamine B (RhB) (40 mg L^-1) can achieve a complete decolorization within 150 min with 25 mg L^-1 3DG/Cu@C catalyst, which is one of the lowest catalyst dosages in hetero-EF for RhB removal. More importantly, the 3DG/Cu@C achieves high RhB mineralization efficiency of 81.5% and exhibits high catalytic performance in a wide pH window from 3 to 9. The 3DG/Cu@C also remains high efficiency after five successive reaction cycles. The working mechanism study shows that RhB is mainly oxidized by ^•OH and O₂^•- radicals through hetero-EF and anodic oxidation processes. The high stability and outstanding performance of 3DG/Cu@C provide new insights in organic pollutants removal by hetero-EF process with transition metal and nanocarbon-based catalysts.

Cu(II) adsorption on 2-thiouracil-modified Luffa cylindrica biochar fibres from artificial and real samples, and competition reactions with U(VI)

The adsorption of Cu(II) ions by biochar fibres prior and after modification with 2-thiouracil on real and artificial samples has been studied by batch-type adsorption experiments, FTIR and XPS spectroscopy and competition reactions using U(VI) ions as competitor cations. The experimental data of the artificial samples clearly show that the modified material presents extraordinary higher affinity for Cu(II) ions even in the acidic pH range, the spectroscopic data indicate the formation of inner-sphere complexes and the competition reactions significantly higher selectivity of the 2-thiouracil modified biochar fibres for Cu(II). The 2-thiouracil-modified biochar fibres have been successfully applied to acid mine drainage (AMD) samples regarding the selective separation of Cu(II) ions from "real" samples. Regarding the desorption of copper from the biochar surface, although 100% copper recovery was achieved by eluting the metal ion using 1 M HNO3, the deterioration of the modified biochar fibers due to extensive 2-thiouracil release from the biochar surface limits the applicability of the present adsorbent in routine and large-scale applications.

Monolayers of an organosilane on magnetite nanoparticles for the fast removal of Cr(VI) from water

Monolayers of N-(2-aminoethyl)-3-aminopropyltrimethoxysilane have been established on magnetite nanoparticles to develop a novel magnetic adsorbent for fast decontamination of hexavalent chromium (Cr(VI)) from water. Results indicated that monolayer adsorption of the silane from water took place at low concentrations (<300 mg/L) and around 100% surface coverage was obtained at temperatures ≥90°C. The hydrolysed silane was anchored to the magnetite surface through condensation reactions between its silanol groups and the surface hydroxyl groups of magnetite. The functional amine groups were protonated by acid treatment for adsorbing Cr(VI). The monolayer of the silane on magnetite (MSM) with approximately 100% surface coverage showed extremely rapid adsorption kinetics for Cr(VI), such that the process was complete within 1 min. This enables the treatment of large amounts of sewage per unit time. The adsorption capacity for Cr(VI) was 8.0 mg/g, as estimated from the Langmuir isotherm model. The saturation magnetization of the MSM reached 64.16 emu/g, allowing easy magnetic recovery from water. In the presence of up to 50-fold molar excesses of chloride and nitrate anions, little effect on Cr(VI) removal was seen, but moderate and large impacts were observed with sulphate and hydroxyl anions, respectively. Desorption of adsorbed Cr(VI) and regeneration of the MSM were successfully achieved by NaOH and HCl treatments to deprotonate and protonate the amine groups, respectively. By selecting a silane with suitable functional groups, the surface properties may be tailored for a particular pollutant.

Highly efficient removal of Cu(ii) by novel dendritic polyamine–pyridine-grafted chitosan beads from complicated salty and acidic wastewaters

In this study, dendritic polyamine chitosan beads with and without 2-aminomethyl pyridine were facilely prepared and characterized. Compared to CN (without the pyridine function), more adsorption active sites, larger pores, higher nitrogen content, higher specific surface area, and higher strength could be obtained for CNP (with the pyridine function). CNP microspheres afforded a larger adsorption capacity than those obtained by CN for different pH values; further, the uptake amounts of Cu(ii) were 0.84 and 1.12 mmol g⁻¹ for CN and CNP beads, respectively, at pH 5. The CNP microspheres could scavenge Cu(ii) from highly acidic and salty solutions: the maximum simulated uptake amount of 1.93 mmol g⁻¹ at pH 5 could be achieved. Due to the strong bonding ability and weakly basic property of pyridine groups, the adsorption capacity of Cu(ii) at pH 1 was 0.75 mmol g⁻¹ in highly salty solutions, which was comparative to those obtained from the commercial pyridine chelating resin M4195 (Q_Cu(II) = 0.78 mmol g⁻¹ at pH 1). In addition, a distinct salt-promotion effect could be observed for CNP beads at both pH 5 and 1. Therefore, the prepared adsorbent CNP beads can have promising potential applications in the selective capturing of heavy metals in complex solutions with higher concentrations of H⁺ and inorganic salts, such as wastewaters from electroplating liquid and battery industries.

Dendritic polyamine chitosan (CNP) beads containing 2-aminomethyl pyridine were facilely prepared for the efficient removal of Cu(ii) ions from highly acidic and salty solutions.

Surfactant-loaded graphene oxide sponge for the simultaneous removal of Cu2+ and bisphenol A from water

The objective of this study was to develop a novel graphene oxide (GO)-based adsorbent by loading the cationic surfactant hexadecyltrimethylammonium bromide (HDTMA) to simultaneously scavenge copper ion, a charged species, and bisphenol A, an uncharged organic compound, from water. The HDTMA modification process was studied and the GO/HDTMA composites characterized using SEM (scanning electron microscopy), XRD (X-ray diffraction), XPS (X-ray photoelectron spectroscopy) and FTIR (Fourier Transform Infrared) spectroscopy. Within the concentration range of 6.4-11.5%, HDTMA caused the 2D GO sheets to form into solid 3D networks by reducing the repulsive forces and increasing the hydrophobic interactions between the adjacent GO sheets. The unique feature of this material is the simultaneous uptake of charged heavy metal ions and uncharged organic contaminants. The negative charges on GO results in the retention of heavy metal ions, while the hydrophobic phase created by the alkyl chain in HDTMA enables the adsorption of organic contaminants. The adsorption capacity of Cu²⁺ and bisphenol A reached 59.7 mg/g and 141.0 mg/g, respectively. The adsorption processes for both Cu²⁺ and bisphenol A were rapid, attaining ∼100% removal in 1 h and 2 h, respectively. Increasing the pH favored the adsorption of the two solutes. The presence of NaCl reduced the retention of Cu²⁺, but was beneficial for the adsorption of bisphenol A. The results demonstrate that the 3D structure and the adsorption of the target species can be achieved by tailoring the surface coverage of HDTMA on GO.

Selective capture of radionuclides (U, Pu, Th, Am and Co) using functional nanoporous sorbents

This work evaluated sorbent materials created from nanoporous silica self-assembled with monolayer (SAMMS) of hydroxypyridinone derivatives (1,2-HOPO, 3,2-HOPO, 3,4-HOPO), acetamide phosphonate (Ac-Phos), glycine derivatives (IDAA, DE4A, ED3A), and thiol (SH) for capturing of actinides and transition metal cobalt. In filtered seawater doped with competing metals (Cr, Mn, Fe, Co, Cu, Zn, Se, Mo) at levels encountered in environmental or physiological samples, 3,4-HOPO-SAMMS was best at capturing uranium (U(VI)) from pH 2-8, Ac-Phos and 1,2-HOPO-SAMMS sorbents were best at pH < 2. 3,4-HOPO-SAMMS effectively captured thorium (Th(IV)) and plutonium (239Pu(IV)) from pH 2-8, and americium (241Am(III)) from pH 5-8. Capturing cobalt (Co(II)) from filtered river water doped with competing metals (Cu, As, Ag, Cd, Hg, Tl, and Pb) was most effective from pH 5-8 with binding affinity ranged from IDAA > DE4A > ED3A > Ac-Phos > SH on SAMMS. Iminodiacetic acid (IDAA)-SAMMS was also outstanding at capturing Co(II) in ground and seawater. Within 5 min, over 99% of U(VI) and Co(II) in seawater was captured by 3,4-HOPO-SAMMS and IDAA-SAMMS, respectively. These nanoporous materials outperformed the commercially available cation sorbents in binding affinity and adsorption rate. They have great potential for water treatment and recovery of actinides and cobalt from complex matrices.

3,2-Hydroxypyridinone-Grafted Chitosan Oligosaccharide Nanoparticles as Efficient Decorporation Agents for Simultaneous Removal of Uranium and Radiation-Induced Reactive Oxygen Species in Vivo

Most of the key radionuclides in the nuclear fuel cycle, such as actinides, possess a combination of heavy metal chemotoxicity and radiotoxicity and therefore represent a severe threat to the ecological environment and public safety. The radiotoxicity originates from direct radiation-induced organ damage and indirect damage, mostly through radiation-induced reactive oxygen species (ROS). Although effective chelating agents that can accelerate the excretion of actinides, such as uranium, have been developed in the past several decades, very few of them can reduce radiation-induced damage from internal contamination. In fact, the strategy of simultaneous removal of actinides and their induced-ROS in vivo has scarcely been considered. Here, we report a 3,2-hydroxypyridinone-grafted chitosan oligosaccharide nanoparticle (COS-HOPO) as a new type of decorporation agent that is effective for the removal of both uranium and ROS in vivo. The cytotoxicity and decorporation assays indicate that the marriage of chitosan oligosaccharide (COS) and hydroxypyridinone (HOPO) gives rise to a remarkable decrease in toxicity and promotion of the uranium removal capability from both kidneys and femurs. The decorporation efficacy can reach up to 43% in rat proximal tubular epithelial cells (NRK-52E), 44% in kidneys, and 32% in femurs. Moreover, the ROS levels of the cells treated with COS-HOPO are significantly lower than those of the control group, implying a promising radiation protection effect. The detoxification mechanism of COS-HOPO is closely related to both chelating U(VI)- and scavenging U(VI)-induced intracellular ROS.

Preparation of Functionalized Magnetic Fe₃O₄@Au@polydopamine Nanocomposites and Their Application for Copper(II) Removal

Polydopamine (PDA) displays many striking properties of naturally occurring melanin in optics, electricity, and biocompatibility. Another valuable feature of polydopamine lies in its chemical structure that incorporates many functional groups such as amine, catechol and imine. In this study, a nanocomposite of magnetic Fe₃O₄@Au@polydopamine nanopaticles (Fe₃O₄@Au@ PDA MNPs) was synthesized. Carboxyl functionalized Fe₃O₄@Au nanoparticles (NPs) were successfully embedded in a layer of PDA through dopamine oxypolymerization in alkaline solution. Through the investigation of adsorption behavior to Cu(II), combined with high sensitive electrochemical detection, the as-prepared magnetic nanocomposites (MNPs) have been successfully applied in the separation and analysis of Cu(II). The experimental parameters of temperature, Cu(II) concentration and pH were optimized. Results showed that the as-prepared MNPs can reach saturation adsorption after adsorbing 2 h in neutral environment. Furthermore, the as-prepared MNPs can be easily regenerated by temperature control and exhibits a good selectivity compared to other metal ions. The prepared Fe₃O₄@Au@PDA MNPs are expected to act as a kind of adsorbent for Cu(II) deep removal from contaminated waters.

Synthesis of Nano-Zinc Oxide Loaded on Mesoporous Silica by Coordination Effect and Its Photocatalytic Degradation Property of Methyl Orange

Salicylaldimine-modified mesoporous silica (Sal-MCM-3 and Sal-MCM-9) was prepared through a co-condensation method with different amounts of added salicylaldimine. With the coordination from the salicylaldimine, zinc ions were impregnated on Sal-MCM-3 and Sal-MCM-9. Then, Zn-Sal-MCM-3 and Zn-Sal-MCM-9 were calcined to obtain nano-zinc oxide loaded on mesoporous silica (ZnO-MCM-3 and ZnO-MCM-9). The material structures were systematically studied by Fourier transform infrared spectroscopy (FTIR), N₂ adsorption/desorption measurements, X-ray powder diffraction (XRD), zeta potential, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet diffused reflectance spectrum (UV-vis DRS), and thermogravimetry (TGA). Methyl orange (MO) was used to investigate the photocatalysis behavior of ZnO-MCM-3 and ZnO-MCM-9. The results confirmed that nano ZnO was loaded in the channels as well as the outside surface of mesoporous silica (MCM-41). The modification of salicylaldimine helped MCM-41 to load more nano ZnO on MCM-41. When the modification amount of salicylaldimine was one-ninth and one-third of the mass of the silicon source, respectively, the load of nano ZnO on ZnO-MCM-9 and ZnO-MCM-3 had atomic concentrations of 1.27 and 2.03, respectively. ZnO loaded on ZnO-MCM-9 had a wurtzite structure, while ZnO loaded on ZnO-MCM-3 was not in the same crystalline group. The blocking effect caused by nano ZnO in the channels reduced the orderliness of MCM-41. The photodegradation of MO can be divided in two processes, which are mainly controlled by the surface areas of ZnO-MCM and the loading amount of nano ZnO, respectively. The pseudo-first-order model was more suitable for the photodegradation process.

Multi-functional magnetic water purifier for disinfection and removal of dyes and metal ions with superior reusability

It is of great practical importance but rarely reported to design a multifunctional scavenger for water purification. In this study, we describe a sophisticated preparation of an inorganic/organic composite sample for the simultaneous removal of anionic dyes and metal ions, as well as disinfection. The sample has a stable structure formed by the covalent connection between a magnetic silica (MS) core and a polyethylenimine derived quaternary ammonium compound (QAC) corona. We characterized the sample in details by SEM, TEM, EDX, FT-IR, XRD, TGA, VSM, and zeta potential. Our QAC-MS sample exhibited superior performance and reusability in the disinfection and adsorption experiments towards acid fuchsin and Cu²⁺. With the virtue of easy separation from solution, our sample should be an ideal candidate for water purification application.

Heterogeneously catalyzed persulfate with a CuMgFe layered double hydroxide for the degradation of ethylbenzene

CuMgFe layered double hydroxide (CuMgFe-LDH) was successfully synthesized and characterized as an efficient catalyst of persulfate (PS) for the degradation of ethylbenzene. Under the conditions of 0.2gL^-1 CuMgFe-LDH and 4.0mmolL^-1 persulfate at pH 7.6, the degradation efficiency of 0.08mmolL^-1 ethylbenzene was 93.7% with TOC removal efficiency of 65.2% in 24h, and the concentration of Cu leached into the solution was as low as 0.095mgL^-1 after the reaction. The reuse of CuMgFe-LDH showed that the catalyst was highly stable after 5 recycles. Electron Spin Resonance (ESR) test and free radical quenching experiment indicated that SO₄^- and OH radicals were the dominant species accounted for the degradation of ethylbenzene in the CuMgFe-LDH/persulfate system. Catalytic mechanism of the formation of a complex of Cu(II)O₃SOOSO₃^2- and the subsequent redox cycle of Cu(II)/Cu(III) accounted for the generation of radicals was proposed.

A cancer cell-specific fluorescent probe for imaging Cu2+ in living cancer cells

Monitoring copper level in cancer cells is important for the further understanding of its roles in the cell proliferation, and also could afford novel copper-based strategy for the cancer therapy. Herein, we have developed a novel cancer cell-specific fluorescent probe for the detecting Cu²⁺ in living cancer cells. The probe employed biotin as the cancer cell-specific group. Before the treatment of Cu²⁺, the probe showed nearly no fluorescence. However, the probe can display strong fluorescence at 581nm in response to Cu²⁺. The probe exhibited excellent sensitivity and high selectivity for Cu²⁺ over the other relative species. Under the guidance of biotin group, could be successfully used for detecting Cu²⁺ in living cancer cells. We expect that this design strategy could be further applied for detection of the other important biomolecules in living cancer cells.

Preparation of thick silica coatings on carbon fibers with fine-structured silica nanotubes induced by a self-assembly process

A facile method to coat carbon fibers with a silica shell is presented in this work. By immobilizing linear polyamines on the carbon fiber surface, the high catalytic activity of polyamines in the sol-gel-processing of silica precursors is used to deposit a silica coating directly on the fiber's surface. The surface localization of the catalyst is achieved either by attaching short-chain polyamines (e.g., tetraethylenepentamine) via covalent bonds to the carbon fiber surface or by depositing long-chain polyamines (e.g., linear poly(ethylenimine)) on the carbon fiber by weak non-covalent bonding. The long-chain polyamine self-assembles onto the carbon fiber substrate in the form of nanoscopic crystallites, which serve as a template for the subsequent silica deposition. The silicification at close to neutral pH is spatially restricted to the localized polyamine and consequently to the fiber surface. In case of the linear poly(ethylenimine), silica shells of several micrometers in thickness can be obtained and their morphology is easily controlled by a considerable number of synthesis parameters. A unique feature is the hierarchical biomimetic structure of the silica coating which surrounds the embedded carbon fiber by fibrillar and interconnected silica fine-structures. The high surface area of the nanostructured composite fiber may be exploited for catalytic applications and adsorption purposes.

Adsorption of Cu2+ and Zn2+ by extracellular polymeric substances (EPS) in different sludges: Effect of EPS fractional polarity on binding mechanism

Extracellular polymeric substances (EPS) in sludge samples played a major role in heavy metals removal during wastewater treatment. In this study, the binding quality, adsorption mechanism, as well as the chemical fractional contribution of the sludge EPS from activated sludge, anaerobic granular sludge and anaerobic flocculent sludge to the adsorption of Zn²⁺ and Cu²⁺ was investigated. For all three sludge samples, Cu²⁺ could be more easily adsorbed than Zn²⁺, and EPS extracted from the anaerobic granular sludge exhibited a relatively higher adsorption capacity than that of anaerobic flocculent sludge and activated sludge. Specifically, hydrophobic EPS of the activated sludge and anaerobic flocculent sludge was more efficient in adsorbing Cu²⁺ and Zn²⁺ than that of the hydrophilic EPS. However, hydrophilic EPS in anaerobic granular sludge played a greater role in heavy metals removal. The adsorption of those two heavy metals onto the unfractionated and hydrophobic EPS could be better described by the Langmuir isotherm, while Freundlich models fitted hydrophilic EPS. In addition, the effect of the heavy metals adsorption on the spectrum characteristics of the sludge EPS was also explored by analysis of FT-IR and fluorescent spectra.

Sonochemically synthesized green sorbent for the simultaneous removal of trace metal ions: application and estimation of measurement uncertainty through bottom-up approach

Synergistic combination of ESM–PEI as a green biosorbent in a packed cartridge for the removal of Cd, Pb, Ni, and Cu from environmental samples.

Visible sequestration of Cu2+ions using amino-functionalized cotton fiber

In this study, an amino functionalized cotton fiber, which was used to adsorb Cu²⁺ionsviavisible sequestration, was prepared and investigated.

High Adsorption of Sulfamethoxazole by an Amine-Modified Polystyrene-Divinylbenzene Resin and Its Mechanistic Insight

Sulfamethoxazole (SMZ) adsorption by a series of amine-modified polystyrene-divinylbenzene resins (PSA/B/C/D) was investigated. All resins showed a similar pH dependent adsorption of SMZ but their capacities were linearly related with the contents of primary amines (-NH2) rather than secondary amines (-NH-). Mechanisms of SMZ adsorption by PSA (highest -NH2 content) were discussed as an example. Due to comparable pKa, H-bonding interactions of -NH2(0) with SMZ(0) (regular H-bond) and SMZ(-) (negative charge-assisted H-bond, (-)CAHB) successively contributed most adsorption (pH 4-9). At weakly acidic pH, -NH2(0) was partially protonated and electrostatic attraction between -NH3(+) and SMZ(-) occurred concurrently, but could be hindered by increased loading of SMZ(0). Hydrophobic/ π-π interactions were not major mechanisms as phenanthrene and nitrobenzenes had little effect on SMZ adsorption. At alkaline pH, where SMZ(-) and -NH2(0) prevailed, adsorption was accompanied by the stoichiometric (∼1.0) proton exchange with water, leading to OH(-) release and the formation of (-)CAHB [SO2N(-)···H···NH2]. The interaction and SMZ spatial distribution in the resin-phase were further confirmed by FTIR and Raman spectra. SMZ was uniformly adsorbed on external and interior surfaces. SMZ adsorption by PSA had low-interference from other coexistent matter, but high stability after multiple regenerations. The findings will guide new adsorbent designs for selectively removing target organics.

Fabrication of Novel Magnetic Nanoparticles of Multifunctionality for Water Decontamination

Efficient and powerful water purifiers are in increasing need because we are facing a more and more serious problem of water pollution. Here, we demonstrate the design of versatile magnetic nanoadsorbents (M-QAC) that exhibit excellent disinfection and adsorption performances at the same time. The M-QAC is constructed by a Fe3O4 core surrounded by a polyethylenimine-derived corona. When dispersed in water, the M-QAC particles are able to interact simultaneously with multiple contaminants, including pathogens and heavy metallic cations and anions, in minutes. Subsequently, the M-QACs along with those contaminants can be easily removed and recollected by using a magnet. Meanwhile, the mechanisms of disinfection are investigated by using TEM and SEM, and the adsorption mechanisms are analyzed by XPS. In a practical application, M-QACs are applied to polluted river water 8000-fold greater in mass, producing clean water with the concentrations of all major pollutants below the drinking water standard of China. The adsorption ability of M-QAC could be regenerated for continuous use in a facile manner. With more virtues, such as low-cost fabrication and easy scaling up, the M-QAC have been shown to be a very promising multifunctional water purifier with rational design and to have great potential for real water purification applications.

Organically-modified magnesium silicate nanocomposites for high-performance heavy metal removal

A disulfide-grafted polyethyleneimine (PES)@Mg₂SiO₄composite was synthesized, characterized, and used successfully to remove heavy metals from wastewater.

One-Pot Synthesis of Strained Macrocyclic Pyridone Hexamers and Their High Selectivity toward Cu(2+) Recognition

The removal of Cu(2+) ions is relevant to environmental pollution control and neurodegenerative disease treatment. A novel family of strained macrocyclic pyridone hexamers, which exhibit highly selective recognition of Cu(2+) ions and reduce copper content in artificial seawater by 97% at a very low [host]:[CuCl2] molar ratio of 2:1, is documented.

Nanostructured Membranes from Triblock Polymer Precursors as High Capacity Copper Adsorbents

Membrane adsorbers are a proposed alternative to packed beds for chromatographic separations. To date, membrane adsorbers have suffered from low binding capacities and/or complex processing methodologies. In this work, a polyisoprene-b-polystyrene-b-poly(N,N-dimethylacrylamide) (PI-PS-PDMA) triblock polymer is cast into an asymmetric membrane that possesses a high density of nanopores (d ∼ 38 nm) at the upper surface of the membrane. Exposing the membrane to a 6 M aqueous hydrochloric acid solution converts the PDMA brushes that line the pore walls to poly(acrylic acid) (PAA) brushes, which are capable of binding metal ions (e.g., copper ions). Using mass transport tests and static binding experiments, the saturation capacity of the PI-PS-PAA membrane was determined to be 4.1 ± 0.3 mmol Cu(2+) g(-1). This experimental value is consistent with the theoretical binding capacity of the membranes, which is based on the initial PDMA content of the triblock polymer precursor and assumes a 1:1 stoichiometry for the binding interaction. The uniformly sized nanoscale pores provide a short diffusion length to the binding sites, resulting in a sharp breakthrough curve. Furthermore, the membrane is selective for copper ions over nickel ions, which permeate through the membrane over 10 times more rapidly than copper during the loading stage. This selectivity is present despite the fact that the sizes of these two ions are nearly identical and speaks to the chemical selectivity of the triblock polymer-based membrane. Furthermore, addition of a pH 1 solution releases the bound copper rapidly, allowing the membrane to be regenerated and reused with a negligible loss in binding capacity. Because of the high binding capacities, facile processing method implemented, and ability to tailor further the polymer brushes lining the pore walls using straightforward coupling reactions, these membrane adsorbers based on block polymer precursors have potential as a separation media that can be designed to a variety of specific applications.

A novel tetraethylenepentamine functionalized polymeric adsorbent for enhanced removal and selective recovery of heavy metal ions from saline solutions

A novel tetraethylenepentamine functionalized polymeric adsorbent with polymethacrylate–divinylbenzene as the substrate was facilely prepared for the enhanced removal and selective recovery of Cu(ii) and Ni(ii) from saline solutions.

A simple and fast method based on new magnetic ion imprinted polymer nanoparticles for the selective extraction of Ni(ii) ions in different food samples

A schematic diagram for the synthesis process of magnetic ion imprinted polymer nanoparticles.

Polyethyleneimine for copper absorption II: kinetics, selectivity and efficiency from seawater

Nano-thin coatings of glutaraldehyde cross-linked polyethyleneimine effectively and selectively accumulated copper from natural seawater.

Development and cell imaging applications of a novel fluorescent probe for Cu2+

A reactivity-based fluorescent probe was utilized to selectively detecting Cu²⁺ in aqueous solution and living cell.

Enhancement mechanisms behind exclusive removal and selective recovery of copper from salt solutions with an aminothiazole-functionalized adsorbent

The aminothiazole-functionalized adsorbent (CEAD) could exclusively remove and to selectively recover copper. The adsorption and separation properties of Cu(II) onto CEAD from aqueous media, with or without salts such as NaNO3, Ca(NO3)2 and Ni(NO3)2, were systematically compared by carrying out single, binary and multiple component static and dynamic experiments. In binary systems, the adsorption capacities of Cu(II) were obviously increased by 39.47%, 47.37% and 57.89% with Ni(NO3)2, NaNO3 and Ca(NO3)2, respectively. Besides, simulation study was performed to selectively recover Cu(II) from multi-component aqueous media, with the separation factor of only 54.91 in aqueous media without salts. The separation factor became infinite in the presence of NaNO3 and the enhancement ratio for Cu(II) was raised by 126.31%. Dynamic adsorption could separate Cu(II) and Ni(II) completely and the amount of effluent for pure Ni(II) increased to 127 BV with the help of NaNO3. In the predominant chelating mode simulated by density functional theory calculation, a metal ion coordinated with three nitrogen atoms and formed a chelating complex with two five-membered rings, and Cu(II) showed stronger coordinating ability than Ni(II) did. Meanwhile, anions exerted significant beneficial effects by electrostatic screening, and thus strengthened the exclusive removal and selective recovery of Cu(II).