Role of hydroxyl radicals and mechanism of Escherichia coli inactivation on Ag/AgBr/TiO2 nanotube array electrode under visible light irradiation

Biomimetic synergistic effect of redox site and Lewis acid for construction of efficient artificial enzyme

In enzymatic catalysis, the redox site and Lewis acid are the two main roles played by metal to assist amino acids. However, the reported enzyme mimics only focus on the redox-active metal as redox site, while the redox-inert metal as Lewis acid has, to the best of our knowledge, not been studied, presenting a bottleneck of enzyme mimics construction. Based on this, a series of highly efficient MxV2O5·nH2O peroxidase mimics with vanadium as redox site and alkaline-earth metal ion (M2+) as Lewis acid are reported. Experimental results and theoretical calculations indicate the peroxidase-mimicking activity of MxV2O5·nH2O show a periodic change with the Lewis acidity (ion potential) of M2+, revealing the mechanism of redox-inert M2+ regulating electron transfer of V-O through non-covalent polarization and thus promoting H2O2 adsorbate dissociation. The biomimetic synergetic effect of redox site and Lewis acid is expected to provide an inspiration for design of enzyme mimics.

In situ synthesis of graphitic carbon nitride nanosheet/Ti3C2Tx MXene/TiO2 Z-scheme heterojunctions boosting charge transfer for full-spectrum driven photocatalytic sterilization

The development of a full-spectrum responsive photocatalytic germicide with excellent charge separation efficiency to harvest high antimicrobial efficacy is a key goal yet a challenging conundrum. Herein, graphitic carbon nitride nanosheet (PCNS)/Ti3C2Tx MXene/TiO2 (PMT) Z-scheme heterojunctions with robust interface contact were crafted by in situ interfacial engineering. The strong internal electrical field (IEF) from PCNS to TiO2, evinced by the Kelvin Probe Force Microscopy (KPFM) characterization, can obtain high charge separation efficiency with 73.99%, compared to Schottky junction PCNS/Ti3C2Tx (PM, 32.88%) and PCNS (17.70%). The Ti3C2Tx component can not only serve as a transfer pathway to accelerate the recombination of photoexcited electrons of TiO2 and holes of PCNS under the Ultraviolet-visible (UV-vis) light irradiation, but also replenish the photogenic electron concentrations to semiconductors in the near-infrared (NIR) light illumination. Meanwhile, the increased temperature due to the localized surface plasmon resonance (LSPR) can further boost the electronic activity to the generation of reactive oxygen species (ROS). Taken together, the PMT performs a high disinfection efficiency up to 99.40% under full solar spectrum illumination, 3.88 and 9.75 times higher than PCNS and TiO2, respectively, surpassing many reported Z-scheme heterojunctions. This work offers guidance for the design of Z-scheme heterojunction with the implanting of plasmons to secure excellent full-spectrum responsive photocatalytic sterilization performance.

Comparison of Titanium Dioxide and Zinc Oxide Photocatalysts for the Inactivation of Escherichia coli in Water Using Slurry and Rotating-Disk Photocatalytic Reactors

The application of photocatalysis for the disinfection of water has been extensively reported over the past 30 years. Titanium dioxide (TiO2) has been the most widely and successfully used photocatalyst to date; however, it is not without its limitations. Frequently observed long lag times, sometimes up to 60 min, before bacterial inactivation begins and the presence of residual microorganisms, for example, up to 104 colony forming units, remaining after treatment are ongoing challenges with this particular photocatalyst. It is therefore important to find alternative photocatalysts that can address these issues. In this study, we compared the disinfection capacity of TiO2 with that of zinc oxide (ZnO) using Escherichia coli as a model organism in both a suspended and immobilized catalyst system. Our results showed that ZnO was superior to TiO2 in a number of areas. Not only were bacterial rates of destruction much quicker with ZnO, but no lag time was observed prior to inactivation in suspended systems. Furthermore, complete bacterial destruction was observed within the treatment times under investigation. The greater efficiency of ZnO is believed to be due to the decomposition of the bacterial cell wall being driven by hydrogen peroxide as opposed to hydroxyl radicals. The results reported in this paper show that ZnO is a more efficient and cost-effective photocatalyst than TiO2 and that it represents a viable alternative photocatalyst for water disinfection processes.

Three-dimension chitosan hydrogel loading melanin composite nanoparticles for wound healing by anti-bacteria, immune activation and macrophage autophagy promotion

Application of Combined photodynamic therapy (PDT) and photothermal therapy (PTT) has become one of the most promising strategy to replace antibiotics and avoid the epidemic of drug-resistant strains during wound healing. However, high amount of reactive oxygen species (ROS) and high temperature cause severe stress response to normal tissues, leading to potential risks of wound healing. Herein, a three-dimension chitosan hydrogel melanin-glycine-C60 nanoparticles (MGC NPs) were prepared to realized effective anti-bacterial activity, immune activation and macrophage autophagy promotion in three-dimensional wound space without triggering stress response. MGC NP is a composite polymer material composed of natural melanin polymer, oligopeptide and carbon-based material, which showed excellent biological safety. By regulating the peptide length between melanin and C60 and nanoparticle content, a high ROS/heat environment at the upper wound site and a low ROS/heat environment at the lower region adjacent to the wound tissue were established to obtain a three-dimension hydrogel with precise PDT and PTT efficiency in different regions. Highly effective PDT/PTT was used to kill microorganisms in upper region, thus providing a barrier to reduce microbial infection. Mild PDT/PTT in lower region promoted the polarization of M1 macrophage to M2 macrophage and activated autophagy of M2 macrophages, regulating the immune microenvironment and promoting wound repair. In conclusion, the novel three-dimensional PDT/PTT therapy based on natural macromolecules proposed in this study accelerates wound healing through dual pathways on the premise of avoiding wound stress response, which is of great significance for the development of clinical strategies for phototherapy.

Flourishing Antibacterial Strategies for Osteomyelitis Therapy

Osteomyelitis is a destructive disease of bone tissue caused by infection with pathogenic microorganisms. Because of the complex and long-term abnormal conditions, osteomyelitis is one of the refractory diseases in orthopedics. Currently, anti-infective therapy is the primary modality for osteomyelitis therapy in addition to thorough surgical debridement. However, bacterial resistance has gradually reduced the benefits of traditional antibiotics, and the development of advanced antibacterial agents has received growing attention. This review introduces the main targets of antibacterial agents for treating osteomyelitis, including bacterial cell wall, cell membrane, intracellular macromolecules, and bacterial energy metabolism, focuses on their mechanisms, and predicts prospects for clinical applications.

Remarkable Pyro-Catalysis of g-C3N4 Nanosheets for Dye Decoloration under Room-Temperature Cold-Hot Cycle Excitation

Pyroelectric materials have the ability to convert the environmental cold-hot thermal energy such as day-night temperature alternation into electrical energy. The novel pyro-catalysis technology can be designed and realized on the basis of the product coupling between pyroelectric and electrochemical redox effects, which is helpful for the actual dye decomposition. The organic two-dimensional (2D) graphic carbon nitride (g-C₃N₄), as an analogue of graphite, has attracted considerable interest in the field of material science; however, its pyroelectric effect has rarely been reported. In this work, the remarkable pyro-catalytic performance was achieved in the 2D organic g-C₃N₄ nanosheet catalyst materials under the continuous room-temperature cold-hot thermal cycling excitation from 25 °C to 60 °C. The pyro-catalytic RhB dye decoloration efficiency of the 2D organic g-C₃N₄ can reach ~92.6%. Active species such as the superoxide radicals and hydroxyl radicals are observed as the intermediate products in the pyro-catalysis process of the 2D organic g-C₃N₄ nanosheets. The pyro-catalysis of the 2D organic g-C₃N₄ nanosheets provides efficient technology for wastewater treatment applications, utilizing the ambient cold-hot alternation temperature variations in future.

Boosting photocatalytic performances of lamellar BiVO4by constructing S-scheme heterojunctions with AgBr for efficient charge transfer

Successful construction of heterojunction can improve the utilization efficiency of solar light by broadening the absorption range, facilitating charge-carrier separation, promoting carrier transportation and influencing surface-interface reaction. Herein, visible-light-driven AgBr was deposited on the surface of lamellar BiVO₄which was prepared by a facile hydrothermal process to improve charge carrier separation, and subsequent photocatalytic effectiveness. The catalyst with an optimal AgBr/BiVO₄ratio exhibited a superbly enhanced photocatalytic decolorization ability (about 6.85 times higher than that of pure BiVO₄) and high stability after four cycles. The unique photocatalytic mechanism of S-scheme carrier migration was investigated on the bases of radical trapping tests and photo/electrochemical characterizations. Results showed that the enhanced migration strategy and intimately interfacial collaboration guaranteed the effective charge carriers separation/transfer, leading to magnificent photocatalytic performance as well as excellent stability.

Flow electrochemical inactivation of waterborne bacterial endospores

Waterborne pathogens have the risk of spreading waterborne diseases and even pandemics. Some Gram-positive bacteria can form endospores, the hardiest known life form that can withstand heat, radiation, and chemicals. Electrochemical inactivation may offer a promising solution, but is hindered by low inactivation efficiencies resulting from limitation of electrode/endospores interaction in terms of electrochemical reaction selectivity and mass transfer. Herein, these issues were addressed through modifying selectivity of active species formation using electroactive ceramic membrane with high oxygen evolution potential, improving mass transfer property by flow-through operation. In this way, inactivation (6.0-log) of Bacillus atrophaeus endospores was achieved. Theoretical and experimental results demonstrated synergistic inactivation to occur through fragmentation of coat via interfacial electron transfer and electro-produced transient radicals (•OH primarily, •Cl and Cl₂^•- secondarily), thereby increasing cell permeability to facilitate penetration of electro-produced persistent active chlorine for subsequent rupture of intracellular structures. Numbering-up electrode module strategy was proposed to scale up the system, achieving average 5.3-log inactivation of pathogenic Bacillus anthracis endospores for 30 days. This study demonstrates a proof-of-concept manner for effective inactivation of waterborne bacterial endospores, which may provide an appealing strategy for wide-range applications like water disinfection, bio-safety control and defense against biological warfare.

A new acridine-based photosensitizer with ultra-low light requirement efficiently inactivates carbapenem-resistant Acinetobacter baumannii and methicillin-resistant Staphylococcus aureus and degrades their antibiotic resistance genes

The spread of antibiotic resistant pathogens and antibiotic resistance genes (ARGs) in the environment poses a serious threat to public health. However, existing methods are difficult to effectively remove antibiotic resistant pathogens and ARGs from the environment. In this study, we synthesized a new acridine-based photosensitizer, 2,7-dibromo-9-mesityl-10-methylacridinium perchlorate (YM-3), by the heavy atom effect, which could photodynamically inactivate antibiotic resistant pathogens and reduce ARGs by generating singlet oxygen (¹O₂) in an aqueous environment. The ¹O₂ yield of YM-3 was 4.9 times that of its modified precursor. YM-3 could reduce the culturable number and even the viable counts of methicillin-resistant Staphylococcus aureus and carbapenem-resistant Acinetobacter baumannii to 0 (inactivation rate > 99.99999%) after 2 and 8 h of low-intensity blue light (15 W/m²) irradiation, respectively. After 20 h of light exposure, the copy numbers of ARGs in both bacteria were reduced by 5.80 and 4.48 log, respectively, which might indicate that ARGs had been degraded. In addition, YM-3 still had an efficient bactericidal effect after five inactivation cycle. These characteristics of ultra-low light intensity requirement and efficient bactericidal ability make YM-3 have good application prospects for disinfection in indoor and sunlight environment.

Molecular assembly of carbon nitride-based composite membranes for photocatalytic sterilization and wound healing

A multifactorial mechanism for successful dissolution of polymeric carbon nitrides (pCN) was disclosed, enabling pCN to compound more advanced nanocomposites at the molecular level, beyond the traditional solar fuel applications in powders.

Multifunctional phototheranostic agent ZnO@Ag for anti-infection through photothermal/photodynamic therapy

To overcome the limitations of traditional therapeutics, nanotechnology offers a synergistic therapeutic approach for the treatment of bacterial infection and biofilms that has attracted attention. Herein, we report on a ZnO@Ag nanocomposite with good biocompatibility synthesized by doping ZnO NPs with silver nanoparticles (Ag NPs). ZnO@Ag nanocomposites were synthesized with varying ratios of Ag NPs (0.5%, 2%, 8%). Under the same experimental conditions, ZnO@8%Ag exhibited outstanding properties compared to the other nanocomposites and the pristine ZnO NPs. ZnO@8%Ag demonstrated excellent photothermal and photodynamic properties. Also, ZnO@8%Ag demonstrated over 99% inhibition of Staphylococcus aureus (S. aureus) under photothermal therapy (PTT) or photodynamics therapy (PDT) as a result of the excessive generation of reactive oxygen species (ROS) by the Ag+ released, while the pristine ZnO showed an insignificant inhibition rate compared to the PBS group (control). Furthermore, ZnO@8%Ag completely disrupted S. aureus biofilm under a combined PTT/PDT treatment, a synergetic trimodal therapy, although the molecular mechanism of biofilm inhibition remains unclear. Hence, the excellent photothermal, photodynamic, biocompatibility, and bactericidal properties of ZnO@8%Ag present it as an appropriate platform for bacterial and biofilm treatment or other biomedically related applications.

Single-atom Ru loaded on layered double hydroxide catalyzes peroxymonosulfate for effective E. coli inactivation via a non-radical pathway: Efficiency and mechanism

The Fenton-like processes are considered to be one of the most promising strategies for inactivating bacteria due to their capacity to produce reactive oxygen species (ROS). Herein, a catalytic system for efficient inactivation of Escherichia coli (E. coli) was developed by anchoring single-atom Ru on layered double hydroxides (LDH). The Ru/NiFe-LDH catalyst showed excellent performance in activating peroxymonosulfate (PMS) to inactivate E. coli. Under the combined action of the ultra-low concentrations of Ru/NiFe-LDH (40 mg/L) and PMS (5 mg/L), 7 log E. coli can be totally inactivated within 90 s. This was attributed to the combined effect of single-atom Ru adsorption to E. coli and the ROS produced in situ. Mechanism studies indicated that the ¹O₂ with electrophilic properties was the key active species responsible for the rapid inactivation of E. coli. The E. coli inactivation process suggested that the ROS produced first attacked the outer membrane of the cell, then the antioxidant enzymes in the cell were induced, the macromolecule substances were released and mineralized, eventually leading to irreversible cell death. This work firstly loads monoatomic Ru on LDH for bacterial inactivation, providing a feasible method for rapid inactivation of E. coli.

Synergistically Improved Catalytic Ozonation Process Using Iron-Loaded Activated Carbons for the Removal of Arsenic in Drinking Water

This research attempts to find a new approach for the removal of arsenic (As) from drinking water by developing a novel solution. To the author’s knowledge, iron-loaded activated carbons (Fe-AC) have not been previously applied for the removal of As in a synergistic process using ozonation and catalytic ozonation processes. The As was investigated using drinking water samples in different areas of Lahore, Pakistan, and the As removal was compared with and without using catalysts. The results also suggested that the catalytic ozonation process significantly removes As as compared with single ozonation and adsorption processes. Moreover, a feed ozone of 1.0 mg/min and catalyst dose of 10 g was found to maintain a maximum removal efficiency of 98.6% within 30 min. The results of the catalyst dose–effect suggested that the removal of As tends to increase with the increase in catalysts amount. Hence, it is concluded that the Fe-AC/O3 process efficiently removes As in water. Moreover, it was established that the Fe-AC/O3 process might be regarded as an effective method for removing As from drinking water compared to the single ozonation and adsorption processes.

In situ grown bacterial cellulose/MoS2 composites for multi-contaminant wastewater treatment and bacteria inactivation

For the purpose of developing multifunctional water purification materials capable of degrading organic pollutants while simultaneously inactivating microorganisms from contaminated wastewater streams, we report here a facile and eco-friendly method to immobilize molybdenum disulfide into bacterial cellulose via a one-step in-situ biosynthetic method. The resultant nanocomposite, termed BC/MoS₂, was shown to possess a photocatalytic activity capable of generating •OH from H₂O₂, while also exhibiting photodynamic/photothermal mechanisms, the combination of which exhibits synergistic activity for the degradation of pollutants as well as for bacterial inactivation. In the presence of H₂O₂, the BC/MoS₂ nanocomposite exhibited excellent antibacterial efficacy upwards of 99.9999% (6 log units) for the photoinactivation of both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus upon infrared (IR) lamp illumination (100 W, 760 nm ≤ λ ≤ 5000 nm, 15 cm vertical distance; 5 min). Mechanistic studies revealed synergistic pathogen inactivation resulting from the combination of photocatalytically generated •OH and hyperthermia induced by the photothermal conversion of the near-IR light. In addition, the BC/MoS₂ nanocomposite also showed excellent photodegradation activity for common aqueous contaminants in the presence of H₂O₂, including malachite green (a textile dye), catechol violet (a phenol) and formaldehyde. Taken together, our findings demonstrate that sustainable materials such as BC/MoS₂ have potential applications in wastewater treatment and microorganism disinfection.

Gold and Platinum Nanoparticle-Functionalized TiO2 Nanotubes for Photoelectrochemical Glucose Sensing

Developing stable photoelectrochemistry (PEC) glucose biosensors with high sensitivity and a low detection limit is highly desirable in the biosensor field. Herein, a highly sensitive and stable enzymatic glucose PEC biosensor is rationally designed and fabricated using a TiO₂NTs/Au/Pt/GOx electrode. First, we prepared one-dimensional TiO₂ nanotube arrays which could realize the orthogonalization of the light-incident direction and the carrier diffusion direction via anodization. Subsequently, we used the method of photoassisted deposition for anchoring Pt nanoparticles on TiO₂NTs after electrodepositing Au nanoparticles. Among them, Au nanoparticles promote light absorption via the surface plasmon resonance effect and the separation of photogenerated carriers through forming a Schottky junction. Moreover, the Pt nanoparticles on the electrode surface can react with hydrogen peroxide (H₂O₂) generated from glucose (Glu) oxidation by glucose oxidase (GOx), accelerating the electron-transfer process during glucose oxidation and greatly improving the sensitivity of the glucose biosensor. As a result, TiO₂NTs/Au/Pt/GOx exhibited excellent PEC performance, achieving a high sensitivity of 81.93 μA mM^-1 cm^-2 and a low detection limit (1.39 μM), far exceeding the performance of TiO₂NTs/M/GOx (M = Au, Pt). Therefore, the introduction of Pt nanoparticles as active substances to promote enzymatic reactions is important for designing high-performance enzyme biosensors.

Spherical mesoporous Fe-N-C single-atom nanozyme for photothermal and catalytic synergistic antibacterial therapy

Nanozyme has been regarded as an efficient antibiotic to kill bacteria using the reactive oxygen species (ROS) generated by Fenton-like reaction. However, its activity is still unsatisfied and requires large amount of hydrogen peroxide with side effects toward normal tissues. Herein, spherical mesoporous Fe-N-C single-atom nanozyme (SAzyme) is designed for antibacterial therapy via photothermal treatment enhanced Fenton-like catalysis process. Due to the large pore size (4.0 nm), high specific surface area (413.9 m² g^-1) and uniform diameter (100 nm), the catalytic performance of Fe-N-C SAzyme is greatly improved. The Michaelis-Menten constant (K_m) is 4.84 mmol L^-1, which is similar with that of horseradish peroxidase (3.7 mmol L^-1). Moreover, mesoporous Fe-N-C SAzyme shows high photothermal conversion efficiency (23.3 %) owing to the carbon framework. The catalytic activity can be enhanced under light irradiation due to the elevated reaction temperature. The bacteria can also be killed via physical heat effect. Due to the synergistic effect of nanozyme catalysis and photothermal treatment, the antibacterial performance is much higher than that using single antibacterial method. This work provides an alternative for combined antibacterial treatment via photothermal treatment assisted catalytic process using spherical mesoporous single-atom nanozyme as an antibiotic.

Fundamentals and applications of photoelectrocatalysis as an efficient process to remove pollutants from water: A review

Water pollution is an environmental problem in constant raising because of population growing, industrial development, agricultural frontier expansion, and principally because of the lack of wastewater treatment technology to remove organic recalcitrant and toxic pollutants from industrial and domestic wastewater. Recalcitrant compounds are a serious environmental and health problem mainly due to their toxicity and potential hazardous effects on living organisms, including human beings. Conventional wastewater treatments have not been able to remove efficiently pollutants from water; however, electrochemical advanced oxidation processes (EAOPs) are able to solve this environmental concern. One of the most recent EAOPs technology is photoelectrocatalysis (PEC), it consists in applying an external bias potential to a semiconductor film placed over a conductive substrate to avoid the recombination of photogenerated electron-hole (e^-/h⁺) pairs, increasing h⁺ availability and hydroxyl radicals' formation, responsible for promoting the degradation/mineralization of organic pollutants in aqueous medium. This review summarizes the recent advances in PEC as a promising technology for wastewater treatment. It addresses the fundamentals and kinetic aspects of PEC. An analysis of photoanode materials and of the configuration of photoelectrochemical reactors is also presented, including an analysis of the influence of the main operational parameters on the treatment of contaminated water. Finally, the most recent applications of PEC are reviewed, and the challenges and perspectives of PEC in wastewater treatment are discussed.

Photo-assisted electrochemical advanced oxidation processes for the disinfection of aqueous solutions: A review

Disinfection is usually the final step in water treatment and its effectiveness is of paramount importance in ensuring public health. Chlorination, ultraviolet (UV) irradiation and ozone (O3) are currently the most common methods for water disinfection; however, the generation of toxic by-products and the non-remnant effect of UV and O3 still constitute major drawbacks. Photo-assisted electrochemical advanced oxidation processes (EAOPs) on the other hand, appear as a potentially effective option for water disinfection. In these processes, the synergism between electrochemically produced active species and photo-generated radicals, improve their performance when compared with the corresponding separate processes and with other physical or chemical approaches. In photo-assisted EAOPs the inactivation of pathogens takes place by means of mechanisms that occur at different distances from the anode, that is: (i) directly at the electrode's surface (direct oxidation), (ii) at the anode's vicinity by means of electrochemically generated hydroxyl radical species (quasi-direct), (iii) or at the bulk solution (away from the electrode surface) by photo-electrogenerated active species (indirect oxidation). This review addresses state of the art reports concerning the inactivation of pathogens in water by means of photo-assisted EAOPs such as photo-electrocatalytic process, photo-assisted electrochemical oxidation, photo-electrocoagulation and cathodic processes. By focusing on the oxidation mechanism, it was found that while quasi-direct oxidation is the preponderant inactivation mechanism, the photo-electrocatalytic process using semiconductor materials is the most studied method as revealed by numerous reports in the literature. Advantages, disadvantages, trends and perspectives for water disinfection in photo-assisted EAOPs are also analyzed in this work.

Directing photocatalytic pathway to exceedingly high antibacterial activity in water by functionalizing holey ultrathin nanosheets of graphitic carbon nitride

Metal-free polymeric carbon nitride (C₃N₄) photocatalysts offer attractive technological advantages over the conventional transition metal oxides or sulfides -based photocatalysts in water disinfection, but their antimicrobial activities are limited by their rapid charge carrier recombination and low specific surface areas. By controlling photocatalytic pathways, we obtained in amino-rich holey ultrathin g-C₃N₄ nanosheets (AHUCN) a highly efficient inactivation rate against E-coli, which is the highest among the monolithic g-C₃N₄ and exceeds the antibacterial performance of the most of the previously reported g-C₃N₄-based photocatalysts. Both the experiments and theoretical calculations demonstrated that the high photocatalytic disinfection performance of AHUCN was derived from the synergistic advantages of their unique holey ultrathin structure and the amino - rich surface in controlling the charge separation and transfer, and most importantly in increasing the photo-production of the dominant antibacterial species, H₂O₂. From the analysis of the reactive oxygen species and rotating disk electrode (RDE) measurements, it was found that the presence of abundant surface amino groups enabled the switch of the oxygen-reduction pathway from the two-step single-electron indirect reduction on holey ultrathin g-C₃N₄ nanosheets (HUCN) to the one-step two-electron direct reduction on AHUCN. The switch of the H₂O₂ production pathway not only facilitated the separation of photogenerated electron-hole pairs but also promoted the generation of reactive oxygen species, greatly enhancing photocatalytic disinfection efficiency.

A bifunctional nanoplatform based on copper manganate nanoflakes for bacterial elimination via a catalytic and photothermal synergistic effect

Bacterial infection has been recognized as one of the greatest threats to public health. In view of the continuous increase of bacterial resistance, constructing a collaborative bactericidal platform is a promising strategy to enhance the efficiency of antimicrobial agents. Herein, we report a facile, biocompatible and versatile nano-platform based on positively charged copper manganate nanoflakes (CuMnO2 NFs), which exhibits intrinsic peroxidase-like catalytic activity and excellent photothermal properties. The CuMnO2 NFs can bind with negatively charged bacteria via electrostatic interactions, and generate hydroxyl radicals (˙OH) through catalysis involving hydrogen peroxide (H2O2) to make bacteria more susceptible to temperature. Introducing near-infrared light generates hyperthermia to fight against bacteria and enhances the peroxidase-like catalytic activity of the CuMnO2 NFs, thus producing more ˙OH to combat bacteria. The PTT-enhanced ˙OH synergistic antibacterial strategy exerts desirable antibacterial efficiencies of 98.78% and 99.92% against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) at a controlled low temperature (below 50 °C), without damage to healthy tissues. Animal experiments indicate that this synergistic treatment has a better therapeutic effect on S. aureus-infected wounds in mice, compared with either treatment by itself. Therefore, this work holds great promise for developing new synergistic antimicrobial strategies to treat bacterial infections.

Efficient mineralization of sulfanilamide over oxygen vacancy-rich NiFe-LDH nanosheets array during electro-fenton process

Electrochemical degradation of toxic sulfanilamide with inexpensive approach is in urgent demand due to the harmful effects of sulfanilamide for both humans and aquatic environments. Here, we reported an efficient mineralization of sulfanilamide by using NiFe-layered double hydroxide (NiFe-LDH) nanosheets array with abundant oxygen vacancies that was in situ grown on exfoliated graphene (EG) by a simple hydrothermal treatment at different temperatures. The hydrothermal temperature was carefully analyzed for control synthesis of oxygen vacancy-rich NiFe-LDH/EG nanosheets array (NiFe-LDH/EG-OVr) for sulfanilamide degradation. Owing to the abundant oxygen vacancies, NiFe-LDH/EG-OVr rapidly generated hydrogen peroxide (H₂O₂) and hydroxyl radical (•OH) during electro-Fenton (EF) process_, which resulted in the 98% mineralization of sulfanilamide in first 80 min. The radicals trapping experiments revealed that the •OH radicals was participated as the main active oxidation species in the efficient mineralization of sulfanilamide. The present results indicated that the oxidative attack by •OH radicals initiated the degradation process of sulfanilamide. During the total degradation of sulfanilamide, several organic compounds including aminophenol, hydroquinone, and oxalic acid, were identified as main intermediates by using gas chromatography-mass spectroscopy (GC-MS) and high-performance liquid chromatography-mass spectroscopy (HPLC-MS).

Combined Iron-Loaded Zeolites and Ozone-Based Process for the Purification of Drinking Water in a Novel Hybrid Reactor: Removal of Faecal Coliforms and Arsenic

This study was carried out to provide a novel solution to treat drinking water at household levels, specifically removing arsenic (As) and faecal coliforms (microbes). In the current investigation, a synergistic iron-loaded zeolites and ozonation process (O3/Fe-ZA) was used for the first time in a modified batch reactor to remove coliform bacteria and arsenic in tap water. Moreover, the study utilizes the human health risk assessment model to confirm the health risk due to As intake in drinking water. The risk assessment study revealed a health risk threat among the residents suffering from the adverse effects of As through its intake in drinking water. Furthermore, the results also suggested that the O3/Fe-ZA process significantly removes faecal coliforms and As, when compared with single ozonation processes. Additionally, the ozone dose 0.2 mg/min and Fe-ZA dose of 10 g (in the O3/Fe-ZA process) gives the maximum removal efficiency of 100% within 15 min for faecal coliform removal. In 30 min, the removal efficiency of 88.4% was achieved at the ozone dose of 0.5 mg/min and 93% removal efficiency was achieved using 10 g Fe-ZA for the removal of As in the O3/Fe-ZA process. Hence, it was concluded that the O3/Fe-ZA process may be regarded as an effective method for removing faecal coliforms and As from drinking water compared to the single ozonation processes.

Plasmonic nano-antimicrobials: properties, mechanisms and applications in microbe inactivation and sensing

Bacterial, viral and fungal infections pose serious threats to human health and well-being. The continuous emergence of acute infectious diseases caused by pathogenic microbes and the rapid development of resistances against conventional antimicrobial drugs necessitates the development of new and effective strategies for the safe elimination of microbes in water, food or on surfaces, as well as for the inactivation of pathogenic microbes in human hosts. The need for new antimicrobials has triggered the development of plasmonic nano-antimicrobials that facilitate both light-dependent and -independent microbe inactivation mechanisms. This review introduces the relevant photophysical mechanisms underlying these plasmonic nano-antimicrobials, and provides an overview of how the photoresponses and materials properties of plasmonic nanostructures can be applied in microbial pathogen inactivation and sensing applications. Through a systematic analysis of the inactivation efficacies of different plasmonic nanostructures, this review outlines the current state-of-the-art in plasmonic nano-antimicrobials and defines the application space for different microbial inactivation strategies. The advantageous optical properties of plasmonic nano-antimicrobials also enhance microbial detection and sensing modalities and thus help to avoid exposure to microbial pathogens. Sensitive and fast plasmonic microbial sensing modalities and their theranostic and targeted therapeutic applications are discussed.

Morphological and physiological changes in Lentilactobacillus hilgardii cells after cold plasma treatment

Atmospheric cold plasma (ACP) inactivation of Lentilactobacillus hilgardii was investigated. Bacteria were exposed to ACP dielectric barrier discharge with helium and oxygen as working gases for 5, 10, and 15 min. The innovative approach in our work for evaluation of bacterial survival was the use in addition to the classical plate culture method also flow cytometry which allowed the cells to be sorted and revealed different physiological states after the plasma treatment. Results showed total inhibition of bacterial growth after 10-min of ACP exposure. However, the analysis of flow cytometry demonstrated the presence of 14.4% of active cells 77.5% of cells in the mid-active state and 8.1% of dead cells after 10 min. In addition, some of the cells in the mid-active state showed the ability to grow again on culture medium, thus confirming the hypothesis of induction of VBNC state in L .hilgardii cells by cold plasma. In turn, atomic force microscopy (AFM) which was used to study morphological changes in L. hilgardii after plasma treatment at particular physiological states (active, mid-active, dead), showed that the surface roughness of the mid-active cell (2.70 ± 0.75 nm) was similar to that of the control sample (2.04 ± 0.55 nm). The lack of considerable changes on the cell surface additionally explains the effective cell resuscitation. To the best of our knowledge, AFM was used for the first time in this work to analyze cells which have been sorted into subpopulations after cold plasma treatment and this is the first work indicating the induction of VBNC state in L. hilgardii cells after exposure to cold plasma.

Bactericidal Activity of TiO2 Nanotube Thin Films on Si by Photocatalytic Generation of Active Oxygen Species

The photocatalytic bactericidal activity of titanium dioxide (TiO₂) thin films has been extensively studied. In this study, we investigated the bactericidal activities of TiO₂ nanotube (NT) thin films using Escherichia coli and Staphylococcus aureus cells as the model bacteria. Metallic titanium (Ti) thin films were anodized on a silicon (Si) wafer substrate to form TiO₂ NT thin films. To evaluate the bactericidal activity of the TiO₂ NT thin films, bacteria on the TiO₂ NT thin films were irradiated with near-ultraviolet light (UV-A) at a wavelength of 365 nm. The bactericidal activity was estimated by the survival rate derived from the number of live cells, which form colonies on the cell culture medium. We demonstrated that the survival rate of the two types of bacteria investigated in this study was significantly reduced by UV light irradiation and that there was a difference in the temporal change in the survival rate between the two types of bacteria. Furthermore, we investigated the generation of reactive oxygen species (ROSs) by UV light irradiation of TiO₂ NT thin films using electron spin resonance spectroscopy and fluorescence analysis. We found that the main ROS generated on the surface of the TiO₂ NT film was the hydroxyl radical, OH^•. In addition, the generation of ROSs increased with an increase in the UV irradiation time. We proposed a kinetic model that reproduces the dependence of bacterial viability on the UV light irradiation time by considering the temporal change in the amount of ROSs generated by UV light irradiation. A comparison of the calculated and experimental results revealed that the bactericidal effect consisted of the direct photolysis of bacteria and the photocatalysis via the generation of hydroxyl radicals, with the latter exhibiting a stronger bactericidal effect than the former.

Plasmonic silver/silver oxide nanoparticles anchored bismuth vanadate as a novel visible-light ternary photocatalyst for degrading pharmaceutical micropollutants

The degradation of pharmaceutical micropollutants is an intensifying environmental problem and synthesis of efficient photocatalysts for this purpose is one of the foremost challenges worldwide. Therefore, this study was conducted to develop novel plasmonic Ag/Ag₂O/BiVO₄ nanocomposite photocatalysts by simple precipitation and thermal decomposition methods, which could exhibit higher photocatalytic activity for mineralized pharmaceutical micropollutants. Among the different treatments, the best performance was observed for the Ag/Ag₂O/BiVO₄ nanocomposites (5 wt.%; 10 min's visible light irradiation) which exhibited 6.57 times higher photodegradation rate than the pure BiVO₄. Further, the effects of different influencing factors on the photodegradation system of tetracycline hydrochloride (TC-HCl) were investigated and the feasibility for its practical application was explored through the specific light sources, water source and cycle experiments. The mechanistic study demonstrated that the photogenerated holes (h⁺), superoxide radicals (•O₂^-) and hydroxyl radicals (•OH) participated in TC-HCl removal process, which is different from the pure BiVO₄ reaction system. Hence, the present work can provide a new approach for the formation of novel plasmonic photocatalysts with high photoactivity and can act as effective practical application for environmental remediation.

Mechanism of Heterogeneous Fenton Reaction Kinetics Enhancement under Nanoscale Spatial Confinement

Nanoscale catalysts that can enable Fenton-like chemistry and produce reactive radicals from hydrogen peroxide activation have been extensively studied in order to overcome the limitations of homogeneous Fenton processes. Despite several advantageous features, limitation in mass transfer of short-lived radical species is an inherent drawback of the heterogeneous system. Here, we present a mechanistic foundation for the way spatial confinement of Fenton chemistry at the nanoscale can significantly enhance the kinetics of radical-mediated oxidation reactions-pollutant degradation in particular. We synthesized a series of Fe₃O₄-functionalized nanoreactors with precise pore dimensions, based on an anodized aluminum oxide template, to enable quantitative analysis of nanoconfinement effects. Combined with computational simulation of spatial distribution of radicals, we found that hydroxyl radical concentration was strongly dependent on the distance from the surface of Fenton catalysts. This distance dependency significantly influences the gross reaction kinetics and accounts for the observed nanoconfinement effects. We further found that a length scale below 25 nm is critical to avoid the limitation of short-lived species diffusion and achieve kinetics that are orders of magnitude faster than those obtained in a batch suspension of heterogeneous catalysts. These findings suggest a new strategy to develop an innovative heterogeneous catalytic system with the most effective use of hydroxyl radicals in oxidation treatment scenarios.

Plasmonic Photocatalysts for Microbiological Applications

Wide-bandgap semiconductors modified with nanostructures of noble metals for photocatalytic activity under vis irradiation due to localized surface plasmon resonance (LSPR), known as plasmonic photocatalysts, have been intensively investigated over the last decade. Most literature reports discuss the properties and activities of plasmonic photocatalysts for the decomposition of organic compounds and solar energy conversion. Although noble metals, especially silver and copper, have been known since ancient times as excellent antimicrobial agents, there are only limited studies on plasmonic photocatalysts for the inactivation of microorganisms (considering vis-excitation). Accordingly, this review has discussed the available literature reports on microbiological applications of plasmonic photocatalysis, including antibacterial, antiviral and antifungal properties, and also a novel study on other microbiological purposes, such as cancer treatment and drug delivery. Although some reports indicate high antimicrobial properties of these photocatalysts and their potential for medical/pharmaceutical applications, there is still a lack of comprehensive studies on the mechanism of their interactions with microbiological samples. Moreover, contradictory data have also been published, and thus more study is necessary for the final conclusions on the key-factor properties and the mechanisms of inactivation of microorganisms and the treatment of cancer cells.

A two-step gas/liquid strategy for the production of N-doped defect-rich transition metal dichalcogenide nanosheets and their antibacterial applications

Herein, we developed a general two-step gas expansion and exfoliation strategy based on a urea-assisted hydrothermal process combined with sonication exfoliation for the production of nitrogen (N)-doped plus defect-rich transition metal dichalcogenide (TMD) nanosheets (NSs) such as N-MoS₂ and N-WS₂ NSs. The interlayers of bulk MoS₂ (or WS₂) were expanded with urea molecules dissolved in distilled water, which were decomposed to NH₃ during the hydrothermal process. Simultaneously, sulfur atoms were partly replaced by N atoms to achieve N doping. Subsequently, sonication exfoliation of the urea-treated bulk MoS₂ (or WS₂) promoted the production of defect-rich NSs. Importantly, the defect-rich N-MoS₂ and N-WS₂ NSs exhibit enhanced peroxidase-like catalytic activity after being captured by bacteria, and can catalyze hydrogen peroxide (H₂O₂) to produce more toxic hydroxyl radicals (˙OH) than non-N-doped MoS₂ or WS₂ NSs. As a result, the N-MoS₂ or N-WS₂ NSs were capable of effectively killing Gram-negative ampicillin resistant Escherichia coli (Amp^rE. coli) and Gram-positive endospore-forming Bacillus subtilis (B. subtilis) and promoting bacteria-infected wound healing. This work not only provides a simple, universal exfoliation strategy for producing defect-rich N-doped TMD NSs but also provides a promising catalytic antibacterial option and has potential for many other catalytic applications.

Enhanced the photoelectrocatalytic performance of TiO2 nanotube arrays by the synergistic sensitization of Ag-AgBr nanospheres

Ag-AgBr nanospheres were synthesized on the tubular surface of TiO₂ nanotube arrays (TiO₂ NTA/Ag-AgBr) by the one-pot hydrothermal deposition strategy using cetyltrimethyl ammonium bromide (CTAB) as bromine source and morphology controlling agent. The results showed that the TiO₂ NTA/Ag-AgBr (0.025) prepared with 0.025 g CTAB had the uniform particle distribution, high visible light absorption, photoelectric conversion activity and photoelectrocatalytic (PEC) removal of organic dyes and heavy metal ions. The high photocatalytic decomposition of organic pollutants in waste water was attributed to the synergistic effect of Ag-AgBr nanospheres with the strong visible light response and effective separation of electron-hole pairs. The active group and photocatalytic mechanism for the rapid pollutant removal were systematically explored. This work will open the window of TiO₂ NTA based photoelectrodes for the applications in solar energy conversion and dyeing waste water purification.

Visible-light-driven photochemical activity of ternary Ag/AgBr/TiO2 nanotubes for oxidation C(sp3)–H and C(sp2)–H bonds

The Ag/AgBr/TiO₂ ternary nanotube as a heterogeneous photocatalyst was used for the solvent-free oxidation of the benzylic C(sp³)–H bond or the solvent-controlled selective oxidative cleavage of the CC double bond of styrene under visible light at room temperature.

Photoelectrocatalytic bacterial inactivation of Acinetobacter baumannii on Cu2O/TiO2@Cu mesh photoanodes

A Cu₂O/TiO₂@Cu mesh acting as a photoanode presented strong photoelectrochemical activity for bacterial inactivation of Acinetobacter baumannii.

Aeration-assisted sulfite activation with ferrous for enhanced chloramphenicol degradation

In this study, an Fe(Ⅱ)/S(IV) system was designed for the degradation of chloramphenicol (CAP). The pseudo-first-order rate constants for CAP degradation under typical conditions with and without air purging were investigated. The greatly enhanced rate of 0.0099 min^-1 with air purging compared with 0.0006 min^-1 with no air purging indicated that aeration was significant to the degradation of CAP in Fe(Ⅱ)/S(Ⅳ) system. Radical scavenging experiments revealed that SO₄^- was the primary oxidant generated from the activation of S(IV) with Fe(II), accounting for around 70% of degradation under weak acidic and neutral conditions. Increasing Fe(II) and S(IV) doses promoted the degradation of CAP, whereas the overdose of them led to a decreased degradation rate by scavenging radicals. Owing to the participation of oxygen in the formation of ferric sulfite complex and SO₅^-, the increase of dissolved oxygen improved the removal efficiency of CAP. The removal efficiency of CAP was also found to be pH dependent, decreasing from acid condition (initial pH = 4) to basic condition (initial pH = 8). The presence of coexisting anions and water matrix was found inhibiting CAP degradation in Fe(Ⅱ)/S(Ⅳ) system. This work provides an understanding on the working mechanism and possible applications of Fe(Ⅱ)/S(Ⅳ) system in organic compound degradation in wastewater.

Enhanced photocatalytic disinfection of Escherichia coli K-12 by porous g-C3N4 nanosheets: Combined effect of photo-generated and intracellular ROSs

The porous graphitic carbon nitride nanosheets (PCNSs) with high yields were synthesized by using one-step chemical exfoliation method. PCNSs accelerated separation efficiency of photo-generated electron-hole pairs in comparison to bulk graphitic carbon nitride. The PCNS5 (exfoliation for 5 h) exhibited optimal photocatalytic disinfection capability towards Escherichia coli K-12 under simulated solar light irradiation with complete disinfection of 6.5 log₁₀ cfu/mL of E. coil K-12 within 2 h. The enhanced photocatalytic activity of PCNS5 originated from mesoporous nanosheet structure. The possible mechanism of photocatalytic disinfection has proposed that intracellular reactive oxygen species levels and the activities of antioxidant enzymes (e.g., catalase and superoxide dismutase) were enhanced. Transmission electron microscope images observed during photocatalytic disinfection process suggested that the cell membrane was regarded as the first target for oxidation, resulting in a faster leakage of cytoplasmic content and finally degradation of DNA leading to bacterial death. Furthermore, the trapping experiment showed that superoxide radical (•O₂^-) and holes (h⁺) were responsible for E. coli K-12 disinfection by PCNS5.

Multifunctional Magnetic Copper Ferrite Nanoparticles as Fenton-like Reaction and Near-Infrared Photothermal Agents for Synergetic Antibacterial Therapy

Synergistic therapeutic strategies for bacterial infection have attracted extensive attentions owing to their enhanced therapeutic effects and less adverse effects compared with monotherapy. Herein, we report a novel synergistic antibacterial platform that integrates the nanocatalytic antibacterial therapy and photothermal therapy (PTT) by hemoglobin-functionalized copper ferrite nanoparticles (Hb-CFNPs). In the presence of a low concentration of hydrogen peroxide (H₂O₂), the excellent Fenton and Fenton-like reaction activity of Hb-CFNPs can effectively catalyze the decomposition of H₂O₂ to produce hydroxyl radicals (·OH), rendering an increase in the permeability of the bacterial cell membrane and the sensitivity to heat. With the assistance of NIR irradiation, hyperthermia generated by Hb-CFNPs can induce the death of the damaged bacteria. Additionally, owing to the outstanding magnetic property of Hb-CFNPs, it can improve the photothermal efficiency by about 20 times via magnetic enrichment, which facilitates to realize excellent bactericidal efficacy at a very low experimental dose (20 μg/mL). In vitro antibacterial experiment shows that this synergistic antibacterial strategy has a broad-spectrum antibacterial property against Gram-negative Escherichia coli (E. coli, 100%) and Gram-positive Staphylococcus aureus (S. aureus, 96.4%). More importantly, in vivo S. aureus-infected abscess treatment studies indicate that Hb-CFNPs can serve as an antibacterial candidate with negligible toxicity to realize synergistic treatment of bacterial infections through catalytic and photothermal effects. Accordingly, this study proposes a novel, high-efficiency, and multifunctional therapeutic system for the treatment of bacterial infection, which will open up a new avenue for the design of synergistic antibacterial systems in the future.

High-efficient synergy of piezocatalysis and photocatalysis in bismuth oxychloride nanomaterial for dye decomposition

In this work, it is found that the hydrothermally-synthesized bismuth oxychloride can behave both the piezocatalysis and photocatalysis for the Rhodamine B dye decomposition. ∼99% decomposition efficiency is achieved after both vibrating and lighting the Rhodamine B dye solution for ∼96 min with the addition of bismuth oxychloride catalyst, while the ∼72% and ∼26% decomposition efficiencies are obtained for only photocatalysis or only piezocatalysis respectively. In bi-catalysis, the mechanical strain produced due to vibration will directly provide an electric field that will increase the separation between the photo-induced electron-hole pairs, yielding to the enhanced decomposition performance of bi-catalysis. There is no significant change in the bi-catalytic performance of bismuth oxychloride nanomaterial observed after being recycled four times. Bismuth oxychloride catalyst is potential for the bi-catalytic decomposition treatment of wastewater through harvesting both the environmental vibration energy and light energy.