Colloidal properties of nanoparticular biogenic selenium govern environmental fate and bioremediation effectiveness

Aerobic Se(IV) reducing bacteria and their reducing characteristics in estuarine sediment

Microorganisms play a critical role in the biogeochemical cycling of selenium in natural ecosystems, particularly in reducing selenite (Se(IV)) to element selenium (Se(0)) which reduces its mobility and bioavailability. However, Se(IV)-reducing bacteria and their reducing characteristics in estuarine sediments remain inadequately understood. In this study, the reduction of Se(IV) was confirmed to be microbially driven through the cultivation of a mixture of estuarine sediment and Se(IV) under aerobic conditions. Community analysis indicates that Bacillus was primarily involved in the reduction of Se(IV). A strain with high salt tolerance (7.5 % NaCl) and Se(IV) resistance (up to 200 mM), Bacillus cereus SD1, was isolated from an estuarine sediment. The reduction of Se(IV) occurred concomitantly with the onset of microbial growth, and reduction capacity increased approximately 5-fold by adjusting the pH. In addition, Se(IV) reduction in Bacillus cereus SD1 was significantly inhibited by sulfite, and the key enzyme activity tests revealed the possible presence of a sulfite reductase-mediated Se(IV) reduction pathway. These research findings provide new insights into the bioreducing characteristics and the biogeochemical cycling of selenium in estuarine environments.

Selenate bioreduction in a large in situ field trial

Removing selenium (Se) from mine effluent is a common challenge. A long-term, in situ experiment was conducted to bioremediate large volumes (up to 7500 mc d-1) of Se(VI)-contaminated water (mean 87 μg L-1) by injecting the water into a saturated waste rock fill (SRF) at a coal mining operation in Elk Valley, British Columbia, Canada. To stimulate/maintain biofilm growth in the SRF, labile organic carbon (methanol) and nutrients were added to the water prior to its injection. A conservative tracer (Br-) was also added to track the migration of injected water across the SRF, identify wells with minimal dilution and used to quantify the extent of bioreduction. The evolution of the Se species through the SRF was monitored in time and space for 201 d. Selenium concentrations of <3.8 μg L-1 were attained in monitoring wells located 38 m from the injection wells after 114 to 141 d of operation. Concentrations of Se species in water samples from complementary long-term (351-498 d) column experiments using influent Se(VI) concentrations of 1.0 mg L-1 were consistent with the results of the in situ experiment. Solid samples collected at the completion of the column experiments confirmed the presence of indigenous Se-reducing bacteria and that the sequestered Se was present as insoluble Se(0), likely in Se-S ring compounds. Based on the success of this ongoing bioremediation experiment, this technology is being applied at other mine sites.

Electroactive Brevundimonas diminuta consortium mediated selenite bioreduction, biogenesis of selenium nanoparticles and bio-electricity generation

In this study, highly selenite-resistant strains belonging to Brevundimonas diminuta (OK287021, OK287022) genus were isolated from previously operated single chamber microbial fuel cell (SCMFC). The central composite design showed that the B. diminuta consortium could reduce selenite. Under optimum conditions, 15.38 Log CFU mL-1 microbial growth, 99.08% Se(IV) reduction, and 89.94% chemical oxygen demand (COD) removal were observed. Moreover, the UV-visible spectroscopy (UV) and Fourier transform infrared spectroscopy (FTIR) analyses confirmed the synthesis of elemental selenium nanoparticles (SeNPs). In addition, transmission electron microscopy (TEM) and scanning electron microscope (SEM) revealed the formation of SeNPs nano-spheres. Besides, the bioelectrochemical performance of B. diminuta in the SCMFC illustrated that the maximum power density was higher in the case of selenite SCMFCs than those of the sterile control SCMFCs. Additionally, the bioelectrochemical impedance spectroscopy and cyclic voltammetry characterization illustrated the production of definite extracellular redox mediators that might be involved in the electron transfer progression during the reduction of selenite. In conclusion, B. diminuta whose electrochemical activity has never previously been reported could be a suitable and robust biocatalyst for selenite bioreduction along with wastewater treatment, bioelectricity generation, and economical synthesis of SeNPs in MFCs.

Identification and Functional Characterization of a Surfactant-like Protein Region in Flagellin FliC for Stabilizing Selenium Nanoparticles and Enhancing Bioavailability

Biogenic selenium nanoparticles (SeNPs) are the most favorable Se form for nutritional supplementation due to their high stability, low toxicity, and high activity. However, the interaction between the surface-binding proteins and their stable biogenic SeNPs, as well as their impact on the stability and bioavailability of SeNPs, remains to be understood. In vitro stabilization experiments revealed an amino acid segment (F(235-386)) in Rahnella aquatilis' flagellin FliC, with surfactant-like properties, stabilizing SeNPs under harsh conditions. FliC and F(235-386) were employed as stabilizers to synthesize SeNPs (FliC@SeNPs and F(235-386)@SeNPs), and surface chemistry analysis revealed coordination reactions between the proteins and Se atoms on the surface of SeNPs. Both FliC and F(235-386) enhanced SeNPs uptake in wheat seedlings but reduced it in bacteria and yeast. This study highlights FliC's core function in stabilizing SeNPs and enhancing their bioavailability, paving the way for agricultural and nutritional applications.

Amorphous structure and crystal stability determine the bioavailability of selenium nanoparticles

Microorganisms play a critical role in the biogeochemical cycling of selenium, often reducing selenite/selenate to elemental selenium nanoparticles (SeNPs). These SeNPs typically exist in an amorphous structure but can transform into a trigonal allotrope. However, the crystal structural transition process and its impact on selenium bioavailability have not been well studied. To shed light on this, we prepared chemosynthetic and biogenic SeNPs and investigated the stability of their crystal structure. We found that biogenic SeNPs exhibited a highly stable amorphous structure in various conditions, such as lyophilization, washing, and laser irradiation, whereas chemosynthetic SeNPs transformed into a trigonal structure in the same conditions. Additionally, a core-shell structure was observed in biogenic SeNPs after electron beam irradiation. Further analysis revealed that biogenic SeNPs showed a coordination reaction between Se atoms and surface binding biomacromolecules, indicating that the outer layer of Se-biomacromolecules complex prevented the SeNPs from crystallizing. We also investigated the effects of SeNPs crystal structures on the bioavailability in bacteria, yeast, and plants, finding that the amorphous structure of SeNPs determined Se bioavailability.

Aggregation and stability of selenium nanoparticles: Complex roles of surface coating, electrolytes and natural organic matter

The application of selenium nanoparticles (SeNPs) as nanofertilizers may lead to the release of SeNPs into aquatic systems. However, the environmental behavior of SeNPs is rarely studied. In this study, using alginate-coated SeNPs (Alg-SeNPs) and polyvinyl alcohol-coated SeNPs (PVA-SeNPs) as models, we systematically investigated the aggregation and stability of SeNPs under various water conditions. PVA-SeNPs were highly stable in mono- and polyvalent electrolytes, probably due to the strong steric hindrance of the capping agent. Alg-SeNPs only suffered from a limited increase in size, even at 2500 mmol/L NaCl and 200 mmol/L MgCl₂, while they underwent apparent aggregation in CaCl₂ and LaCl₃ solutions. The binding of Ca²⁺ and La³⁺ with the guluronic acid part in alginate induced the formation of cross-linking aggregates. Natural organic matter enhanced the stability of Alg-SeNPs in monovalent electrolytes, while accelerated the attachment of Alg-SeNPs in polyvalent electrolytes, due to the cation bridge effects. The long-term stability of SeNPs in natural water showed that the aggregation sizes of Alg-SeNPs and PVA-SeNPs increased to several hundreds of nanometers or above 10 µm after 30 days, implying that SeNPs may be suspended in the water column or further settle down, depending on the surrounding water chemistry. The study may contribute to the deep insight into the fate and mobility of SeNPs in the aquatic environment. The varying fate of SeNPs in different natural waters also suggests that the risks of SeNPs to organisms living in diverse depths in the aquatic compartment should be concerned.

Nanoparticulate pollutants in the environment: Analytical methods, formation, and transformation

The wide application of nanomaterials and plastic products generates a substantial number of nanoparticulate pollutants in the environment. Nanoparticulate pollutants are quite different from their bulk counterparts because of their unique physicochemical properties, which may pose a threat to environmental organisms and human beings. To accurately predict the environmental risks of nanoparticulate pollutants, great efforts have been devoted to developing reliable methods to define their occurrence and track their fate and transformation in the environment. Herein, we summarized representative studies on the preconcentration, separation, formation, and transformation of nanoparticulate pollutants in environmental samples. Finally, some perspectives on future research directions are proposed.

Recovery of residual metals from jarosite waste using chemical and biochemical processes to achieve sustainability: A state-of-the-art review

Jarosite is a residue that is generated as a by-product during zinc extraction, and it consists of various types of heavy metal (loid)s such as arsenic, cadmium, chromium, iron, lead, mercury and silver. Due to the huge jarosite turn-over rate, and less efficient and expensive residual metal extraction processes, the zinc-producing industries dispose this waste in landfills. However, the leachate generated from such landfills contains a high concentration of heavy metal (loid)s that could contaminate the nearby water resources and cause environmental concern and human health risk. Various thermo-chemical and biological processes have been developed for the recovery of heavy metals from such waste. In this review, we have discussed all those pyrometallurgical, hydrometallurgical, and biological. Those studies were critically reviewed and compared on the basis of their techno-economic differences. The review indicated that these processes have their own benefits and drawbacks such as overall yield, economic and technical constraints, and the need for more than one process to mobilize multiple metal ions from jarosite. Also, in this review, the residual metal extraction processes from jarosite waste have been linked with the relevant UN Sustainable Development Goals (SDGs), which can be useful for a better approach to sustainable development.

Time-Resolved Examination of Fungal Selenium Redox Transformations

Selenium (Se) is both a micronutrient required for most life and an element of environmental concern due to its toxicity at high concentrations, and both bioavailability and toxicity are largely influenced by the Se oxidation state. Environmentally relevant fungi have been shown to aerobically reduce Se(IV) and Se(VI), the generally more toxic and bioavailable Se forms. The goal of this study was to shed light on fungal Se(IV) reduction pathways and biotransformation products over time and fungal growth stages. Two Ascomycete fungi were grown with moderate (0.1 mM) and high (0.5 mM) Se(IV) concentrations in batch culture over 1 month. Fungal growth was measured throughout the experiments, and aqueous and biomass-associated Se was quantified and speciated using analytical geochemistry, transmission electron microscopy (TEM), and synchrotron-based X-ray absorption spectroscopy (XAS) approaches. The results show that Se transformation products were largely Se(0) nanoparticles, with a smaller proportion of volatile, methylated Se compounds and Se-containing amino acids. Interestingly, the relative proportions of these products were consistent throughout all fungal growth stages, and the products appeared stable over time even as growth and Se(IV) concentration declined. This time-series experiment showing different biotransformation products throughout the different growth phases suggests that multiple mechanisms are responsible for Se detoxification, but some of these mechanisms might be independent of Se presence and serve other cellular functions. Knowing and predicting fungal Se transformation products has important implications for environmental and biological health as well as for biotechnology applications such as bioremediation, nanobiosensors, and chemotherapeutic agents.

Antifungal Properties of Biogenic Selenium Nanoparticles Functionalized with Nystatin for the Inhibition of Candida albicans Biofilm Formation

In the present study, biogenic selenium nanoparticles (SeNPs) have been prepared using Paenibacillus terreus and functionalized with nystatin (SeNP@PVP_Nystatin nanoconjugates) for inhibiting growth, morphogenesis, and a biofilm in Candida albicans. Ultraviolet-visible spectroscopy analysis has shown a characteristic absorption at 289, 303, and 318 nm, and X-ray diffraction analysis has shown characteristic peaks at different 2θ values for SeNPs. Electron microscopy analysis has shown that biogenic SeNPs are spherical in shape with a size in the range of 220-240 nm. Fourier transform infrared spectroscopy has confirmed the functionalization of nystatin on SeNPs (formation of SeNP@PVP_Nystatin nanoconjugates), and the zeta potential has confirmed the negative charge on the nanoconjugates. Biogenic SeNPs are inactive; however, nanoconjugates have shown antifungal activities on C. albicans (inhibited growth, morphogenesis, and a biofilm). The molecular mechanism for the action of nanoconjugates via a real-time polymerase chain reaction has shown that genes involved in the RAS/cAMP/PKA signaling pathway play an important role in antifungal activity. In cytotoxic studies, nanoconjugates have inhibited only 12% growth of the human embryonic kidney cell line 293 cells, indicating that the nanocomposites are not cytotoxic. Thus, the biogenic SeNPs produced by P. terreus can be used as innovative and effective drug carriers to increase the antifungal activity of nystatin.

Biogenic synthesis of selenium and tellurium nanoparticles by marine bacteria and their biological activity

Selenium (SeNPs) and tellurium nanoparticles (TeNPs) were synthesized by green technology using the three new bacterial marine isolates (strains PL 2476, AF 2469 and G 2451). Isolates were classified as Pseudoalteromonas shioyasakiensis according to 16S rRNA sequence analysis, morphological characteristics, and biochemical reactions. The bioreduction processes of isolates were studied in comparison with the previously described Alteromonas macleodii (strain 2328). All strains exhibited significant tolerance to selenite and tellurite up to 1000 µg/mL. A comparative analysis of the bioreduction processes of the isolates demonstrated that the strains have a high rate of reduction processes. Characterization of biogenic red SeNPs and black TeNPs using scanning electron microscopy (SEM), EDX analysis, Dynamic Light Scattering, and micro-Raman Spectroscopy revealed that all the isolates form stable spherical selenium and tellurium nanoparticles whose size as well as elemental composition depend on the producer strain. Nanoparticles of the smallest size (up to 100 nm) were observed only for strain PL 2476. Biogenic SeNPs and TeNPs were also characterized and tested for their antimicrobial, antifouling and cytotoxic activities. Significant antimicrobial activity was shown for nanoparticles at relatively high concentrations (500 and 1000 µg/mL), with the antimicrobial activity of TeNPs being more significant than SeNPs. In contrast, against cell cultures (breast cancer cells (SkBr3) and human dermal fibroblasts (HDF) SeNPs showed greater toxicity than tellurium nanoparticles. Studies have demonstrated the high antifouling effectiveness of selenium and tellurium nanoparticles when introduced into self-polishing coatings. According to the results obtained, the use of SeNPs and TeNPs as antifouling additives can reduce the concentration of leachable biocides used in coatings, reducing the pressure on the environment.

Retention of immobile Se(0) in flow-through aquifer column systems during bioreduction and oxic-remobilization

Selenium (Se) is a toxic contaminant with multiple anthropogenic sources, including ⁷⁹Se from nuclear fission. Se mobility in the geosphere is generally governed by its oxidation state, therefore understanding Se speciation under variable redox conditions is important for the safe management of Se contaminated sites. Here, we investigate Se behavior in sediment groundwater column systems. Experiments were conducted with environmentally relevant Se concentrations, using a range of groundwater compositions, and the impact of electron-donor (i.e., biostimulation) and groundwater sulfate addition was examined over a period of 170 days. X-Ray Absorption Spectroscopy and standard geochemical techniques were used to track changes in sediment associated Se concentration and speciation. Electron-donor amended systems with and without added sulfate retained up to 90% of added Se(VI)_(aq), with sediment associated Se speciation dominated by trigonal Se(0) and possibly trace Se(-II); no Se colloid formation was observed. The remobilization potential of the sediment associated Se species was then tested in reoxidation and seawater intrusion perturbation experiments. In all treatments, sediment associated Se (i.e., trigonal Se(0)) was largely resistant to remobilization over the timescale of the experiments (170 days). However, in the perturbation experiments, less Se was remobilized from sulfidic sediments, suggesting that previous sulfate-reducing conditions may buffer Se against remobilization and migration.

Interplay between arsenic and selenium biomineralization in Shewanella sp. O23S

Bacteria play crucial roles in the biogeochemical cycle of arsenic (As) and selenium (Se) as these elements are metabolized via detoxification, energy generation (anaerobic respiration) and biosynthesis (e.g. selenocysteine) strategies. To date, arsenic and selenium biomineralization in bacteria were studied separately. In this study, the anaerobic metabolism of As and Se in Shewanella sp. O23S was investigated separately and mixed, with an emphasis put on the biomineralization products of this process. Multiple analytical techniques including ICP-MS, TEM-EDS, XRD, Micro-Raman, spectrophotometry and surface charge (zeta potential) were employed. Shewanella sp. O23S is capable of reducing selenate (SeO₄^2-) and selenite (SeO₃^2-) to red Se(-S)⁰, and arsenate (AsO₄^3-) to arsenite (AsO₃^3-). The release of H₂S from cysteine led to the precipitation of AsS minerals: nanorod AsS and granular As₂S₃. When As and Se oxyanions were mixed, both As-S and Se(-S)⁰ biominerals were synthesized. All biominerals were extracellular, amorphous and presented a negative surface charge (-24 to -38 mV). Kinetic analysis indicated the following reduction yields: SeO₃^2- (90%), AsO₄^3- (60%), and SeO₄^2- (<10%). The mix of SeO₃^2- with AsO₄^3- led to a decrease in As removal to 30%, while Se reduction yield was unaffected (88%). Interestingly, SeO₄^2- incubated with AsO₄^3- boosted the Se removal (71%). The exclusive extracellular formation of As and Se biominerals might indicate an extracellular respiratory process characteristic of various Shewanella species and strains. This is the first study documenting a complex interplay between As and Se oxyanions: selenite decreased arsenate reduction, whereas arsenate stimulated selenate reduction. Further investigation needs to clarify whether Shewanella sp. O23S employs multi-substrate respiratory enzymes or separate, high affinity enzymes for As and Se oxyanion respiration.

Treatment technologies for selenium contaminated water: A critical review

Selenium is an indispensable trace element for humans and other organisms; however, excessive selenium in water can jeopardize the aquatic environment. Investigations on the biogeochemical cycle of selenium have shown that anthropogenic activities such as mining, refinery, and coal combustion mainly contribute to aquatic selenium pollution, imposing tremendous risks on ecosystems and human beings. Various technologies thus have been developed recently to treat selenium contaminated water to reduce its environmental impacts. This work provides a critical review on the applications, characteristics, and latest developments of current treatment technologies for selenium polluted water. It first outlines the present status of the characteristics, sources, and toxicity of selenium in water. Selenium treatment technologies are then classified into three categories: 1) physicochemical separation including membrane filtration, adsorption, coagulation/precipitation, 2) redox decontamination including chemical reduction and catalysis, and 3) biological transformation including microbial treatment and constructed wetland. Details of these methods including their overall efficiencies, applicability, advantages and drawbacks, and latest developments are systematically analyzed and compared. Although all these methods are promising in treating selenium in water, further studies are still needed to develop sustainable strategies based on existing and new technologies. Perspectives on future research directions are laid out at the end.

Selenium (Se) recovery for technological applications from environmental matrices based on biotic and abiotic mechanisms

Selenium (Se) is an essential element with application in manufacturing from food to medical industries. Water contamination by Se is of concern due to anthropogenic activities. Recently, Se remediation has received increasing attention. Hence, different types of remediation techniques are listed in this work, and their potential for Se recovery is evaluated. Sorption, co-precipitation, coagulation and precipitation are effective for low-cost Se removal. In photocatalytic, zero-valent iron and electrochemical systems, the above mechanisms occur with reduction as an immobilization and detoxification process. In combination with magnetic separation, the above techniques are promising for Se recovery. Biological Se oxyanions reduction has been widely recognized as a cost-effective method for Se remediation, simultaneously generating biosynthetic Se nanoparticles (BioSeNPs). Increasing the extracellular production of BioSeNPs and controlling their morphology will benefit its recovery. However, the mechanism of the microbial production of BioSeNPs is not well understood. Se containing products from both microbial reduction and abiotic methods need to be refined to obtain pure Se. Eco-friendly and cost-effective Se refinery methods need to be developed. Overall, this review offers insight into the necessity of shifting attention from Se remediation to Se recovery.

An economical strategy towards the managing of selenium pollution from contaminated water: A current state-of-the-art review

During the last few decades, contamination of selenium (Se) in groundwater has turned out to be a major environmental concern to provide safe drinking water. The content of selenium in such contaminated water might range from 400 to 700 μg/L, where bringing it down to a safe level of 40 μg/L for municipal water supply employing appropriate methodologies is a major challenge for the global researcher communities. The current review focuses mostly on the governing selenium remediation technologies such as coagulation-flocculation, electrocoagulation, bioremediation, membrane-based approaches, adsorption, electro-kinetics, chemical precipitation, and reduction methods. This study emphasizes on the development of a variety of low-cost adsorbents and metal oxides for the selenium decontamination from groundwater as a cutting-edge technology development along with their applicability, and environmental concerns. Moreover, after the removal, the recovery methodologies using appropriate materials are analyzed which is the need of the hour for the reutilization of selenium in different processing industries for the generation of high valued products. From the literature survey, it has been found that hematite modified magnetic nanoparticles (MNP) efficiently adsorb Se (IV) (25.0 mg/g) from contaminated groundwater. MNP@hematite reduced Se (IV) concentration from 100 g/L to 10 g/L in 10 min at pH 4-9 using a dosage of 1 g/L. In 15 min, the magnetic adsorbent can be recycled and regenerated using a 10 mM NaOH solution. The adsorption and desorption efficiencies were over 97% and 82% for five consecutive cycles, respectively. To encourage the notion towards scale-up, a techno-economic evaluation with possible environmentally sensitive policy analysis has been introduced in this article to introspect the aspects of sustainability. This type of assessment is anticipated to be extremely encouraging to convey crucial recommendations to the scientific communities in order to produce high efficiency selenium elimination and further recovery from contaminated groundwater.

Aerobic granular sludge for efficient biotransformation of chalcogen SeIV and TeIV oxyanions: Biological nutrient removal and biogenesis of Se0 and Te0 nanostructures

Simultaneous removal of selenite (Se^IV), tellurite (Te^IV) and nutrients by aerobic granular sludge (AGS) was investigated. A sequencing batch reactor (SBR) was operated with increasing Se^IV and Te^IV (up to 500 µM each) for 205 days to evaluate metalloid oxyanion and nutrient removal. AGS efficiently removed Se^IV and Te^IV by readily converting them to biomass associated forms. The total Se and Te removal efficiencies were higher at 98% and 99%, respectively. Formation of biomass-associated Se⁰ and Te⁰ was confirmed by XRD, Raman spectroscopy and SEM-EDX. Feeding of Se^IV and Te^IV elicited inhibitory action on ammonium removal initially, nonetheless removal performance was recovered during the subsequent cycles. Ammonium, total nitrogen and phosphorus removals were stabilized at 85%, 80% and 75%, respectively, at 500 µM of Se^IV and Te^IV. Sequencing of 16S rRNA gene confirmed enrichment of known Se^IV and Te^IV reducing bacteria in the granules. qPCR and removal kinetics supported ammonia removal via nitritation-denitritation. This work demonstrates functional capabilities of AGS for effectively removing toxic Se^IV and Te^IV oxyanions apart from performing simultaneous COD, nitrogen and phosphorus removal. Efficient biological nutrient removal in the presence of toxic Se^IV and Te^IV concentrations, suggests robustness of AGS and its resilience to toxic contaminants.

Highly stable selenium nanoparticles: Assembly and stabilization via flagellin FliC and porin OmpF in Rahnella aquatilis HX2

Microorganisms play a critical role in the reduction of the more toxic selenite and selenate to the less toxic elemental selenium. However, the assembly process and stability of selenium nanoparticles (SeNPs) remain understudied. The plant growth-promoting rhizobacterium Rahnella aquatilis HX2 can reduce selenite to biogenic SeNPs (BioSeNPs). Two main proteins, namely flagellin FliC and porin OmpF were identified in the BioSeNPs. The fliC and ompF gene mutation experiments demonstrated that the FliC and OmpF could control the assembly of BioSeNPs in vivo. At the same time, the expressed and purified FliC and OmpF could control the assembly of SeNPs in vitro. BioSeNPs produced by R. aquatilis HX2 exhibited high stability under various ionic strengths, while the chemically synthesized SeNPs (CheSeNPs) showed a high level of aggregation. The in vitro experiments verified that FliC and OmpF could prevent the aggregation of the CheSeNPs under various ionic strengths. This work reports the preparation of highly stable BioSeNPs produced by strain R. aquatilis HX2 and verifies that FliC and OmpF both could control the assembly and stability of BioSeNPs. BioSeNPs with high stability could be suitable as nutritional supplement to remedy selenium deficiency and in nanomedicine applications.

Selenium respiration in anaerobic bacteria: Does energy generation pay off?

Selenium (Se) respiration in bacteria was revealed for the first time at the end of 1980s. Although thermodynamically-favorable, energy-dense and documented in phylogenetically-diverse bacteria, this metabolic process appears to be accompanied by a number of challenges and numerous unanswered questions. Selenium oxyanions, SeO₄^2- and SeO₃^2-, are reduced to elemental Se (Se⁰) through anaerobic respiration, the end product being solid and displaying a considerable size (up to 500 nm) at the bacterial scale. Compared to other electron acceptors used in anaerobic respiration (e.g. N, S, Fe, Mn, and As), Se is one of the few elements whose end product is solid. Furthermore, unlike other known bacterial intracellular accumulations such as volutin (inorganic polyphosphate), S⁰, glycogen or magnetite, Se⁰ has not been shown to play a nutritional or ecological role for its host. In the context of anaerobic respiration of Se oxyanions, biogenic Se⁰ appears to be a by-product, a waste that needs proper handling, and this raises the question of the evolutionary implications of this process. Why would bacteria use a respiratory substrate that is useful, in the first place, and then highly detrimental? Interestingly, in certain artificial ecosystems (e.g. upflow bioreactors) Se⁰ might help bacterial cells to increase their density and buoyancy and thus avoid biomass wash-out, ensuring survival. This review article provides an in-depth analysis of selenium respiration (model selenium respiring bacteria, thermodynamics, respiratory enzymes, and genetic determinants), complemented by an extensive discussion about the evolutionary implications and the properties of biogenic Se⁰ using published and original/unpublished results.

Analysis of Bioavailability and Induction of Glutathione Peroxidase by Dietary Nanoelemental, Organic and Inorganic Selenium

Dietary organic selenium (Se) is commonly utilized to increase formation of selenoproteins, including the major antioxidant protein, glutathione peroxidase (GPx). Inorganic Se salts, such as sodium selenite, are also incorporated into selenoproteins, and there is evidence that nanoelemental Se added to the diet may also be effective. We conducted two trials, the first investigated inorganic Se (selenite), organic Se (L-selenomethionine) and nanoelemental Se, in conventional mice. Their bioavailability and effectiveness to increase GPx activity were examined. The second trial focused on determining the mechanism by which dietary Se is incorporated into tissue, utilising both conventional and germ-free (GF) mice. Mice were fed a diet with minimal Se, 0.018 parts per million (ppm), and diets with Se supplementation, to achieve 0.07, 0.15, 0.3 and 1.7 ppm Se, for 5 weeks (first trial). Mass spectrometry, Western blotting and enzymatic assays were used to investigate bioavailability, protein levels and GPx activity in fresh frozen tissue (liver, ileum, plasma, muscle and feces) from the Se fed animals. Inorganic, organic and nanoelemental Se were all effectively incorporated into tissues. The high Se diet (1.7 ppm) resulted in the highest Se levels in all tissues and plasma, independent of the Se source. Interestingly, despite being ~11 to ~25 times less concentrated than the high Se, the lower Se diets (0.07; 0.15) resulted in comparably high Se levels in liver, ileum and plasma for all Se sources. GPx protein levels and enzyme activity were significantly increased by each diet, relative to control. We hypothesised that bacteria may be a vector for the conversion of nanoelemental Se, perhaps in exchange for S in sulphate metabolising bacteria. We therefore investigated Se incorporation from low sulphate diets and in GF mice. All forms of selenium were bioavailable and similarly significantly increased the antioxidant capability of GPx in the intestine and liver of GF mice and mice with sulphate free diets. Se from nanoelemental Se resulted in similar tissue levels to inorganic and organic sources in germ free mice. Thus, endogenous mechanisms, not dependent on bacteria, reduce nanoelemental Se to the metabolite selenide that is then converted to selenophosphate, synthesised to selenocysteine, and incorporated into selenoproteins. In particular, the similar efficacy of nanoelemental Se in comparison to organic Se in both trials is important in the view of the currently limited cheap sources of Se.

Investigation of materials for reactive permeable barrier in removing cadmium and chromium(VI) from aquifer near a solid domestic waste landfill

The sorption characteristics of raw and biofilm-coated materials: vermiculite, lightweight expanded clay aggregate (LECA), perlite, zeolite, and shungite toward Cd and Cr(VI) ions were investigated to evaluate the possibility of their use as filtration barrier in the aquifer near a solid domestic waste landfill. The effectiveness of Cr(VI) removal by the raw materials changed in the following order: shungite > zeolite > perlite > vermiculite > LECA and for Cd: zeolite > shungite > vermiculite > perlite > LECA. After biofilm formation on the surface of the materials, the sorption capacity increased in some (perlite, LECA), while in others (zeolite) it was reduced. Four kinetic models were used to describe the experimental data. Mechanisms of metal removal were proposed: for Cr(VI), a characteristic combination of sorption processes was suggested, while the removal of Cd ions could occur by ion exchange and by complexation on the surface of the sorbent. Cr(VI) reduction by living bacterial cells forming a biofilm on the sorbent surface was assessed.

Opposite impacts of K+ and Ca2+ on membrane fouling by humic acid and cleaning process: Evaluation and mechanism investigation

Understanding the influences of cations on membrane fouling was important to improve the performance of membrane filtration system, however, opposite conclusions were made in different studies. Meanwhile, although the influences of cation concentration have been studied extensively, few attentions have been paid to the cation valence. To clarify it, the effects of typical cations on membrane fouling and cleaning, as well as the related mechanisms were investigated systemically in this study. K⁺ and Ca²⁺ were chosen as the representative cations, and humic acid (HA) was chosen as the membrane foulants. The results demonstrated Ca²⁺ promoted the formation of reversible fouling, meanwhile higher removal efficiency of HA could also be achieved with the assistance of filtration cake containing HA + Ca²⁺. However, K⁺ led to the formation of more recalcitrant irreversible fouling. By comparing the concentration of cations in feed and permeate, analyzing the influence of cations on size of HA flocs, and the detailed SEM, AFM and TEM observation, it could be found that different mechanisms dominated the interaction between cations and HA. The bridging effect induced by Ca²⁺ attributed to the extension of HA molecules, while the electrostatic shielding effect induced by K⁺ led to the compression of them. Moreover, the different characteristics of hydrated Ca²⁺ and K⁺ also contributed to the different structures of foulant layers formed by HA + Ca²⁺ and HA + K⁺. Given the abundance of K⁺ and Ca²⁺ in natural water, results of this study can provide valuable advice for practical membrane filtration process.

Developments in the study and applications of bacterial transformations of selenium species

Microbial bio-transformations of the essential trace element selenium are now recognized to occur among a wide variety of microorganisms. These transformations are used to convert this element into its assimilated form of selenocysteine, which is at the active center of a number of key enzymes, and to produce selenium nanoparticles, quantum dots, metal selenides, and methylated selenium species that are indispensable for biotechnological and bioremediation applications. The focus of this review is to present the state-of-the-art of all aspects of the investigations into the bacterial transformations of selenium species, and to consider the characterization and biotechnological uses of these transformations and their products.

Effect of Nitrate and Perchlorate on Selenate Reduction in a Sequencing Batch Reactor

Selenate removal from a water body is being vigorously debated owing to severe health impact, but inhibitions of coexisting anions have been reported. To suggest a viable treatment option, this study investigates the effect of nitrate and perchlorate on selenate reduction in a laboratory-scale sequencing batch reactor. The experimental design tests how competing electron acceptors (NO3− and ClO4−) and electron donor (acetate) limitations affect selenate reduction in the reactor. Results show that the reactor achieves almost complete selenate reduction within the initial concentration ranges of 0.1–1 mM by enriching selenate-reducing bacteria with appropriate temperature (30 °C) and acclimation period (50 days). We monitored simultaneous selenate and nitrate reduction in the reactor without specific inhibition due to a difference in microbial growth strategy related to electron donor status. Lack of perchlorate-reducing bacteria makes perchlorate addition (0.2 mM) not to be closely associated with dissimilative perchlorate reduction. These results provide information that can help us to understand the effect of competing electron acceptors on selenate reduction and the kinetics of potential parallel reactions in the reactor.

Bacillus safensis JG-B5T affects the fate of selenium by extracellular production of colloidally less stable selenium nanoparticles

Understanding the impact of microorganisms on the mobility of selenium (Se) is important for predicting the fate of toxic Se in the environment and improving wastewater treatment technologies. The bacteria strain Bacillus safensis JG-B5T, isolated from soil in a uranium mining waste pile, can influence the Se speciation in the environment and engineered systems. However, the mechanism and conditions of this process remain unknown. This study found that the B. safensis JG-B5T is an obligate aerobic microorganism with an ability to reduce 70% of 2.5 mM selenite to produce red spherical biogenic elemental selenium nanoparticles (BioSeNPs). Only extracellular production of BioSeNPs was observed using transmission electron microscopy. The two-chamber reactor experiments, genome analysis and corona proteins identified on BioSeNPs suggested that the selenite reduction process was primarily mediated through membrane-associated proteins, like succinate dehydrogenase. Extracellular presence and low colloidal stability of BioSeNPs as indicated by ζ-potential measurements, render B. safensis JG-B5T an attractive candidate in wastewater treatment as it provides easy way of recovering Se while maintaining low Se discharge. As this microorganism decreases Se mobility, it will affect Se bioavailability in the environment and decreases its toxicity.

Se(IV) oxidation by ferrate(VI) and subsequent in-situ removal of selenium species with the reduction products of ferrate(VI): performance and mechanism

In order to treat selenium pollution, the study presents the use of potassium ferrate (K₂FeO₄) as an environmentally friendly agent for in situ removal of Se(IV) from aqueous media. Batch experiments were carried out to evaluate the influences of various factors including dosage of K₂FeO₄, ex-situ and in-situ adsorption, initial pH, and adsorption isotherms. The results showed that increasing dosage of K₂FeO₄ benefited the removal of total selenium with the efficiency up to 97.0% and Se(IV) removal significantly depended on pH, and as the pH increases, the decrease in Se(IV) adsorption efficiency is a general trend of pH dependence. The X-ray powder diffraction, Fourier transformed infrared spectrometer and high-resolution X-ray photoelectron spectroscopy analysis indicated that Se(IV) was removed from the aqueous solution by adsorbing on the surface of the decomposition products of K₂FeO₄ which are ferric oxide nanoparticles, and the selenium adsorbed on the generated ferric oxide nanoparticles existed in the forms of Se(IV) and Se(VI). Se(IV) and Se(VI) were adsorbed to the decomposition products of K₂FeO₄ by forming an inner-sphere complexes and an outer-sphere complexes, respectively.

Biological treatment of selenate-containing saline wastewater by activated sludge under oxygen-limiting conditions

Selenium often coincides with high salinity in certain industrial wastewaters, which can be a limitation in the practical application of biological treatment. However, there are no studies on the biological treatment of selenate-containing saline wastewater. A sequencing batch reactor inoculated with activated sludge was applied to treat selenate in the presence of 3% (w/v) NaCl. Start-up of the sequencing batch reactor with a 7-day cycle duration and excessive acetate as the sole carbon source succeeded in removing above 98% and 72% soluble and solid selenium, respectively, under oxygen-limiting conditions. Further selenium removal experiments with a shorter cycle duration of 3 days and a stepwise decrease of acetate addition achieved soluble and total selenium removal efficiencies in most batches above 96% and 80%, respectively. Mass balance analysis revealed that selenate was converted into elemental selenium, most of which was accumulated in the sludge. Microscopic analyses also found that elemental selenium particles were primarily present as approximately 2 μm large rods, with some extremely large particles above 10 μm. Although the bacterial populations responsible for selenium removal, especially selenate reduction, could not be identified by microbial community analysis, this study reported for the first time that selenate could be biologically treated in the presence of considerable salinity, offering implications for the practical treatment of selenium in certain industrial wastewaters.

A comprehensive review on environmental transformation of selenium: recent advances and research perspectives

Selenium (Se) is an important micronutrient and essential trace element for both humans and animals, which exist in the environment ubiquitously. Selenium deficiency is an important issue worldwide, with various reported cases of its deficiency. Low selenium contents in some specific terrestrial environments have resulted in its deficiency in humans. However, high levels of selenium in the geochemical environment may have harmful influences and can cause a severe toxicity to living things. Due to its extremely narrow deficiency and toxicity limits, selenium is becoming a serious matter of discussion for the scientists who deals with selenium-related environmental and health issues. Based on available relevant literature, this review provides a comprehensive data about Se sources, levels, production and factors affecting selenium bioavailability/speciation in soil, characteristics of Se, biogeochemical cycling, deficiency and toxicity, and its environmental transformation to know the Se distribution in the environment. Further research should focus on thoroughly understanding the concentration, speciation, Se cycling in the environment and food chain to effectively utilize Se resources, remediate Se deficiency/toxicity, and evaluate the Se states and eco-effects on human health.

Chemical-Free Recovery of Elemental Selenium from Selenate-Contaminated Water by a System Combining a Biological Reactor, a Bacterium-Nanoparticle Separator, and a Tangential Flow Filter

Biological selenate (SeO₄^2-) reduction to elemental selenium nanoparticles (SeNPs) has been intensively studied but little practiced because of the additional cost associated with separation of SeNPs from water. Recovery of the SeNPs as a valuable resource has been researched to make the approach more competitive. Separation of the intracellular SeNPs from the biomass usually requires the addition of chemicals. In this research, a novel approach that combined a biological reactor, a bacterium-SeNP separator, and a tangential flow ultrafiltration module (TFU) was investigated to biologically reduce selenate and separate the SeNPs, biomass, and water from each other. This approach efficiently removed and recovered selenium while eliminating the use of chemicals for separation. The three units in the approach worked in synergism to achieve the separation and recovery. The TFU module retained the biomass in the system, which increased the biomass retention time and allowed for more biomass decay through which intracellular SeNPs could be released and recovered. SeNP aggregates were separated from bacterial aggregates due to their different interactions with a tilted polyethylene sheet in the bacterium-SeNP separator. SeNP aggregates stayed on the polyethylene sheet while bacterial aggregates settled down to the bottom of the separator.

Selenium analysis in waters. Part 2: Speciation methods

In aquatic ecosystems, there is often no correlation between the total concentration of selenium present in the water column and the toxic effects observed in that environment. This is due, in part, to the variation in the bioavailability of different selenium species to organisms at the base of the aquatic food chain. The first part of this review (Kumkrong et al., 2018) discusses regulatory framework and standard methodologies for selenium analysis in waters. In this second article, we are reviewing the state of speciation analysis and importance of speciation data for decision makers in industry and regulators. We look in detail at fractionation methods for speciation, including the popular selective sequential hydride generation. We examine advantages and limitations of these methods, in terms of achievable detection limits and interferences from other matrix species, as well as the potential to over- or under-estimate operationally-defined fractions based on the various conversion steps involved in fractionation processes. Additionally, we discuss methods of discrete speciation (through separation methods), their importance in analyzing individual selenium species, difficulties associated with their implementation, as well as ways to overcome these difficulties. We also provide a brief overview of biological treatment methods for the remediation of selenium-contaminated waters. We discuss the importance of selenium speciation in the application of these methods and their potential to actually increase the bioavailability of selenium despite decreasing its total waterborne concentration.

Selenium contamination, consequences and remediation techniques in water and soils: A review

Selenium (Se) contamination in surface and ground water in numerous river basins has become a critical problem worldwide in recent years. The exposure to Se, either direct consumption of Se or indirectly may be fatal to the human health because of its toxicity. The review begins with an introduction of Se chemistry, distribution and health threats, which are essential to the remediation techniques. Then, the review provides the recent and common removal techniques for Se, including reduction techniques, phytoremediation, bioremediation, coagulation-flocculation, electrocoagulation (EC), electrochemical methods, adsorption, coprecipitation, electrokinetics, membrance technology, and chemical precipitation. Removal techniques concentrate on the advantages, drawbacks and the recent achievements of each technique. The review also takes an overall consideration of experimental conditions, comparison criteria and economic aspects.

Redox-stat bioreactors for elucidating mobilisation mechanisms of trace elements: an example of As-contaminated mining soils

The environmental fate of major (e.g. C, N, S, Fe and Mn) and trace (e.g. As, Cr, Sb, Se and U) elements is governed by microbially catalysed reduction-oxidation (redox) reactions. Mesocosms are routinely used to elucidate trace metal fate on the basis of correlations between biogeochemical proxies such as dissolved element concentrations, trace element speciation and dissolved organic matter. However, several redox processes may proceed simultaneously in natural soils and sediments (particularly, reductive Mn and Fe dissolution and metal/metalloid reduction), having a contrasting effect on element mobility. Here, a novel redox-stat (R_cont) bioreactor allowed precise control of the redox potential (159 ± 11 mV, ~ 2 months), suppressing redox reactions thermodynamically favoured at lower redox potential (i.e. reductive mobilisation of Fe and As). For a historically contaminated mining soil, As release could be attributed to desorption of arsenite [As(III)] and Mn reductive dissolution. By contrast, the control bioreactor (R_nat, with naturally developing redox potential) showed almost double As release (337 vs. 181 μg g^-1) due to reductive dissolution of Fe (1363 μg g^-1 Fe²⁺ released; no Fe²⁺ detected in R_cont) and microbial arsenate [As(V)] reduction (189 μg g^-1 released vs. 46 μg g^-1 As(III) in R_cont). A redox-stat bioreactor thus represents a versatile tool to study processes underlying mobilisation and sequestration of other trace elements as well.

Proteins enriched in charged amino acids control the formation and stabilization of selenium nanoparticles in Comamonas testosteroni S44

Elemental selenium nanoparticles (SeNPs) are useful in medicine, environmental remediation and in material science. Biosynthesized SeNPs (BioSeNPs) by bacteria are cheap, eco-friendly and have a lower cytotoxicity in comparison with chemically synthesized ones. Organic matters were found to cap on the surface of BioSeNPs, but the functions were still not entirely clear. The purified BioSeNPs were coated in a thick layer of organic substrates observed by transmission electron microscopy (TEM). Fourier Transform Infrared (FT-IR) and quantitative detection of the coating agents showed that one gram of purified BioSeNPs bound 1069 mg proteins, 23 mg carbohydrates and only very limited amounts of lipids. Proteomics of BioSeNPs showed more than 800 proteins bound to BioSeNPs. Proteins enriched in charged amino acids are the major factor thought to govern the formation process and stabilization of BioSeNPs in bacteria. In view of the results reported here, a schematic model for the molecular mechanism of BioSeNPs formation in bacteria is proposed. These findings are helpful for the artificial green synthesis of stable SeNPs under specific condition and guiding the surface modification of SeNPs for medicine application.

Selenite reduction and ammoniacal nitrogen removal in an aerobic granular sludge sequencing batch reactor

Simultaneous removal of selenite and ammonium by aerobic granular sludge was investigated to develop an improved biological treatment process for selenium rich wastewaters. Aerobic granules not previously exposed to selenite were able to remove selenite by converting it to elemental selenium (Se(0)) and simultaneously remove ammonium under different conditions in batch experiments. To achieve sustainable selenite and ammonium removal, an aerobic granular sludge reactor was operated in fill-and-draw mode with a cycle of anaerobic (8 h) and aeration (15 h) phases. Almost complete removal of different initial concentrations of selenite up to 100 μM was achieved in the anaerobic phase. Ammonium removal was severely inhibited when the granules were initially exposed to 1.27 mg L^-1 selenite, but ammonium and total nitrogen removal efficiencies gradually improved to 100 and 98%, respectively, under selenite-reducing conditions. Selenite loading shifted ammonium removal occurring mainly during the anaerobic phase to both the anaerobic and aeration phases. Selenite was removed from the aqueous phase by converting it to nanoparticulate Se(0), which was entrapped in the granular sludge. Scanning electron microscop-energy dispersive X-ray spectroscopy and X-ray diffraction analysis confirmed the formation of Se(0) nanospheres and their retention in the granular sludge. The effluent Se ranged from 0.02 to 0.25 mg Se L^-1, while treating up to 12.7 mg L^-1 selenite, which is lower as compared to previous studies on selenite removal using activated sludge or anaerobic granular sludge. This study shows that aerobic granular sludge reactors are not only capable of removing toxic selenite, but offer improved treatment of Se-rich wastewaters.

Biotransformation and detoxification of selenite by microbial biogenesis of selenium-sulfur nanoparticles

This study combines the interaction between the toxic oxyanions selenite and selenate and the plant growth promoting bacterium Azospirillum brasilense with a comprehensive characterization of the formed selenium particles. As selenium is an essential trace element, but also toxic in high concentrations, its state of occurrence in nature is of major concern. Growth of the bacterium was affected by selenite (1-5mM) only, observable as a prolonged growth lag-phase of 3days. Subsequently, selenite reduction occurred under aerobic conditions resulting in extracellularly formed insoluble Se⁰ particles. Complementary studies by microscopic and spectroscopic techniques revealed the particles to be homogeneous and stable Se_8-nS_n structured spheres with an average size of 400nm and highly negative surface charge of -18mV in the neutral pH range. As this is the first study showing Azospirillum brasilense being able to biotransform selenite to selenium particles containing a certain amount of sulfur, even if environmental waters supplemented with selenite were used, they may significantly contribute to the biogeochemical cycling of both elements in soil as well as to their soil-plant transfer. Therefore, microbial biotransformation of selenite under certain circumstances may be used for various bio-remediation and bio-technological applications.

Groundwater co-contaminant behavior of arsenic and selenium at a lead and zinc smelting facility

Co-contaminant behavior of arsenic (As) and selenium (Se) in groundwater is examined in this study at a former lead and zinc smelting facility. We collected water quality data, including concentrations of trace metals, major ions, and metalloid speciation, over a 15-year period to document long-term trends and relationships between As, Se, geochemical parameters, and other redox-sensitive trace metals. Concentrations of dissolved As and Se were negatively correlated (Kendall's Tau B correlation coefficient, r = -0.72) and showed a distinctive L-shaped relationship. High-concentration arsenic wells (>5 mg L-1) were characterized by intermediate oxidation-reduction conditions (75 < Eh < 275 mV), near-neutral pH (6.1-7.9), low Ca/Na ratios, elevated Fe and Mn concentrations, and high proportions of As(III) relative to total dissolved As. High-concentration Se wells (>500 μg L-1) were characterized by more positive Eh (305-500 mV), low Fe concentrations, and high proportions of As(V). Batch micocosm experiments showed that aquifer solids contain mineral surfaces and/or microbial communities capable of removing selenate from groundwater. Electron microprobe and Se K-edge X-ray absorption near-edge spectroscopic analyses demonstrated that Se was predominantly associated with elemental Se in the reduced aquifer solids. Factor analysis revealed three discernible groupings of trace metals. Group I includes U, Se, and nitrate-N, all of which are mobile under oxygenated to moderately oxygenated conditions. Group II includes elements that are mobile under Fe(III)-reducing conditions: Fe, total dissolved As, As(III), and ammonium-N. Group III elements (Mo, Sb, and V) showed mobility across the entire range of redox conditions encountered in site groundwater; As(V) clustered with this group of elements. Geochemical modeling suggests that As and Se species were in a state of disequilibrium with respect to measured parameters indicative of redox conditions, although predicted patterns of redox-controlled mobility and attenuation were confirmed. This analysis is important to better understand groundwater contaminant behavior in response to redox conditions ranging from oxic/suboxic to Fe(III)-reducing, but excluding sulfate-reducing conditions.

Interactions between biogenic selenium nanoparticles and goethite colloids and consequence for remediation of elemental mercury contaminated groundwater

Ubiquitous colloidal minerals such as goethite can have a significant impact on the performance of nanoparticles-based groundwater remediation due to aggregation. Heteroaggregation and retention of Se nanoparticles (SeNPs) by goethite in groundwater, and its impact on Hg⁰ remediation by SeNPs were investigated in this study. In order to mitigate the adverse effects of aggregation, the effects of bacterial extracellular polymeric substances (EPS) on the stability of SeNPs and Hg⁰ sequestration using SeNPs were also evaluated. Heteroaggregation of SeNPs with goethite in groundwater was stronger than homoaggregation of SeNPs or goethite. Addition of EPS could slightly decrease homoaggregation of SeNPs and significantly reduce heteroaggregation. Column transport experiments showed that goethite coated quartz sand could retain 1.36 times a higher amount of SeNPs than uncoated quartz sand. Hg⁰ remediation by SeNPs was significantly inhibited by heteroaggregation of SeNPs with goethite and EPS could effectively mitigate this inhibitory effect. The Hg⁰ removal efficiency decreased to 71.6% and 66.9%, respectively in the presence of 20 and 100mgL^-1 goethite. When 200mgL^-1 EPS was added together with 100mgL^-1 goethite, 81.2% of the supplied Hg⁰ was removed from the groundwater. This study demonstrates that the widespread presence of goethite could significantly reduce the remediation efficiency of Hg⁰ contaminated groundwater and that EPS is a promising amendment for mitigating the adverse effects of heteroaggregation. This research also contributes to a further understanding of the environmental behaviour of nanoparticles.

Correlative Cryogenic Spectromicroscopy to Investigate Selenium Bioreduction Products

Accurate mapping of the composition and structure of minerals and associated biological materials is critical in geomicrobiology and environmental research. Here, we have developed an apparatus that allows the correlation of cryogenic transmission electron microscopy (cryo-TEM) and synchrotron hard X-ray microprobe (SHXM) data sets to precisely determine the distribution, valence state, and structure of selenium in biofilms sampled from a contaminated aquifer near Rifle, CO. Results were replicated in the laboratory via anaerobic selenate-reducing enrichment cultures. 16S rRNA analyses of field-derived biofilm indicated the dominance of Betaproteobacteria from the Comamonadaceae family and uncultivated members of the Simplicispira genus. The major product in field and culture-derived biofilms is ∼25-300 nm red amorphous Se⁰ aggregates of colloidal nanoparticles. Correlative analyses of the cultures provided direct evidence for the microbial dissimilatory reduction of Se(VI) to Se(IV) to Se⁰. Extended X-ray absorption fine-structure spectroscopy showed red amorphous Se⁰ with a first shell Se-Se interatomic distance of 2.339 ± 0.003 Å. Complementary scanning transmission X-ray microscopy revealed that these aggregates are strongly associated with a protein-rich biofilm matrix. These findings have important implications for predicting the stability and mobility of Se bioremediation products and understanding of Se biogeochemical cycling. The approach, involving the correlation of cryo-SHXM and cryo-TEM data sets from the same specimen area, is broadly applicable to biological and environmental samples.

Ochrobactrum sp. MPV1 from a dump of roasted pyrites can be exploited as bacterial catalyst for the biogenesis of selenium and tellurium nanoparticles

Background

Bacteria have developed different mechanisms for the transformation of metalloid oxyanions to non-toxic chemical forms. A number of bacterial isolates so far obtained in axenic culture has shown the ability to bioreduce selenite and tellurite to the elemental state in different conditions along with the formation of nanoparticles—both inside and outside the cells—characterized by a variety of morphological features. This reductive process can be considered of major importance for two reasons: firstly, toxic and soluble (i.e. bioavailable) compounds such as selenite and tellurite are converted to a less toxic chemical forms (i.e. zero valent state); secondly, chalcogen nanoparticles have attracted great interest due to their photoelectric and semiconducting properties. In addition, their exploitation as antimicrobial agents is currently becoming an area of intensive research in medical sciences.

Results

In the present study, the bacterial strain Ochrobactrum sp. MPV1, isolated from a dump of roasted arsenopyrites as residues of a formerly sulfuric acid production near Scarlino (Tuscany, Italy) was analyzed for its capability of efficaciously bioreducing the chalcogen oxyanions selenite (SeO₃²⁻) and tellurite (TeO₃²⁻) to their respective elemental forms (Se⁰ and Te⁰) in aerobic conditions, with generation of Se- and Te-nanoparticles (Se- and TeNPs). The isolate could bioconvert 2 mM SeO₃²⁻ and 0.5 mM TeO₃²⁻ to the corresponding Se⁰ and Te⁰ in 48 and 120 h, respectively. The intracellular accumulation of nanomaterials was demonstrated through electron microscopy. Moreover, several analyses were performed to shed light on the mechanisms involved in SeO₃²⁻ and TeO₃²⁻ bioreduction to their elemental states. Results obtained suggested that these oxyanions are bioconverted through two different mechanisms in Ochrobactrum sp. MPV1. Glutathione (GSH) seemed to play a key role in SeO₃²⁻ bioreduction, while TeO₃²⁻ bioconversion could be ascribed to the catalytic activity of intracellular NADH-dependent oxidoreductases. The organic coating surrounding biogenic Se- and TeNPs was also characterized through Fourier-transform infrared spectroscopy. This analysis revealed interesting differences among the NPs produced by Ochrobactrum sp. MPV1 and suggested a possible different role of phospholipids and proteins in both biosynthesis and stabilization of such chalcogen-NPs.

Conclusions

In conclusion, Ochrobactrum sp. MPV1 has demonstrated to be an ideal candidate for the bioconversion of toxic oxyanions such as selenite and tellurite to their respective elemental forms, producing intracellular Se- and TeNPs possibly exploitable in biomedical and industrial applications.

Selenium (IV,VI) reduction and tolerance by fungi in an oxic environment

Microbial processes are known to mediate selenium (Se) oxidation-reduction reactions, strongly influencing Se speciation, bioavailability, and transport throughout the environment. While these processes have commonly been studied in anaerobic bacteria, the role that aerobic fungi play in Se redox reactions could be important for Se-rich soil systems, dominated by microbial activity. We quantified fungal growth, aerobic Se(IV, VI) reduction, and Se immobilization and volatilization in the presence of six, metal-tolerant Ascomycete fungi. We found that the removal of dissolved Se was dependent on the fungal species, Se form (i.e., selenite or selenate), and Se concentration. All six species grew and removed dissolved Se(IV) or Se(VI) from solution, with five species reducing both oxyanions to Se(0) biominerals, and all six species removing at least 15%-20% of the supplied Se via volatilization. Growth rates of all fungi, however, decreased with increasing Se(IV,VI) concentrations. All fungi removed 85%-93% of the dissolved Se(IV) within 10 d in the presence of 0.01 mm Se(IV), although only about 20%-30% Se(VI) was removed when grown with 0.01 mm Se(VI). Fungi-produced biominerals were typically 50- to 300-nm-diameter amorphous or paracrystalline spherical Se(0) nanoparticles. Our results demonstrate that activity of common soil fungi can influence Se form and distribution, and these organisms may therefore play a role in detoxifying Se-polluted environments.

Biological removal of selenate and ammonium by activated sludge in a sequencing batch reactor

Wastewaters contaminated by both selenium and ammonium need to be treated prior to discharge into natural water bodies, but there are no studies on the simultaneous removal of selenium and ammonium. A sequencing batch reactor (SBR) was inoculated with activated sludge and operated for 90days. The highest ammonium removal efficiency achieved was 98%, while the total nitrogen removal was 75%. Nearly a complete chemical oxygen demand removal efficiency was attained after 16days of operation, whereas complete selenate removal was achieved only after 66days. The highest total Se removal efficiency was 97%. Batch experiments showed that the total Se in the aqueous phase decreased by 21% with increasing initial ammonium concentration from 50 to 100mgL^-1. This study showed that SBR can remove both selenate and ammonium via, respectively, bioreduction and partial nitrification-denitrification and thus offer possibilities for treating selenium and ammonium contaminated effluents.

Selenium: environmental significance, pollution, and biological treatment technologies

Selenium is an essential trace element needed for all living organisms. Despite its essentiality, selenium is a potential toxic element to natural ecosystems due to its bioaccumulation potential. Though selenium is found naturally in the earth's crust, especially in carbonate rocks and volcanic and sedimentary soils, about 40% of the selenium emissions to atmospheric and aquatic environments are caused by various industrial activities such as mining-related operations. In recent years, advances in water quality and pollution monitoring have shown that selenium is a contaminant of potential environmental concern. This has practical implications on industry to achieve the stringent selenium regulatory discharge limit of 5μgSeL(-1) for selenium containing wastewaters set by the United States Environmental Protection Agency. Over the last few decades, various technologies have been developed for the treatment of selenium-containing wastewaters. Biological selenium reduction has emerged as the leading technology for removing selenium from wastewaters since it offers a cheaper alternative compared to physico-chemical treatments and is suitable for treating dilute and variable selenium-laden wastewaters. Moreover, biological treatment has the advantage of forming elemental selenium nanospheres which exhibit unique optical and spectral properties for various industrial applications, i.e. medical, electrical, and manufacturing processes. However, despite the advances in biotechnology employing selenium reduction, there are still several challenges, particularly in achieving stringent discharge limits, the long-term stability of biogenic selenium and predicting the fate of bioreduced selenium in the environment. This review highlights the significance of selenium in the environment, health, and industry and biotechnological advances made in the treatment of selenium contaminated wastewaters. The challenges and future perspectives are overviewed considering recent biotechnological advances in the management of these selenium-laden wastewaters.