Graphene in the aquatic environment: adsorption, dispersion, toxicity and transformation

Biodegradable and Reusable Sponge Material Prepared from Pea Protein for the Effective Removal of Heavy Metals

There is a growing demand for biodegradable and sustainable materials, particularly those sourced from agricultural or industrial byproducts, for use in wastewater treatment. This study introduces an approach for developing a sponge-like adsorbent derived exclusively from pea protein (PeaAS-PEI) using liquid foam templating for the removal of heavy metals. The pore size, surface area, and mechanical strength of the sponge were modulated by the extent of protein hydrophobic aggregation induced by ammonium sulfate (AS) immersion based on the salting-out effect. Raising AS concentration from 10 to 20% led to an increase in surface area from 30.69 to 127.41 m2/g and compressive stress from 151.02 ± 8.73 kPa to 316.10 ± 13.87 kPa at 90% strain. Polyethylenimine (PEI) grafting introduced additional amine groups for heavy metal adsorption, and the porosity of the sponge increased from 86.9 to 90.3% upon surface modification. As a result, the PEI-modified sponge showed favorable adsorption performance of Cu(II), Zn(II), and Ni(II) ions at pH 5 with maximum sorption capacities of 67.07, 115.61, and 55.86 mg/g, respectively. The adsorption kinetics and isotherm study suggested that the adsorption process was primarily chemisorption and occurred with monolayer interactions. The negative Gibbs free energy change (ΔG < 0) confirmed that the adsorption was thermodynamically spontaneous. Reusability tests for the PeaAS-PEI sponge revealed that its adsorption capacity could be well maintained over five successive adsorption-desorption cycles, with the removal efficiency of Cu(II) over 95%. The pea protein sponge also exhibited excellent biodegradability in soil within 28 days, with weight losses of 86.1% and 67.5% before and after PEI grafting, respectively. Together, these results indicate the great potential of affordable and sustainable PEI-modified pea protein sponges for the remediation of water polluted with copper, zinc, and nickel ions.

Key factors affecting transport/retention of graphene oxide nanoparticles in porous media: A systematic and critical review

The transport/retention of nanoparticles (NPs) within porous media is becoming a topic of growing global interest. This study presents a comprehensive investigation of the transport/retention and modeling of graphene oxide nanoparticles (GONPs) in saturated/unsaturated porous media as useful nanoparticles in different industries including electronics, biomedicine, and sensors. It conducts a systematic and critical review of 75 articles related to the implementation of GONPs transport/retention in porous media to achieve a comprehensive understanding of transport effective factors specially in unsaturated condition. For this purpose, the factors influencing GONPs transport in porous media are subsequently classified into three categories: (1) GONPs characteristics, (2) porous media characteristics, and (3) flow characteristics. Furthermore, the primary mechanisms including aggregation, straining, blocking, and ripening are crucial for the retention of GONPs. Ultimately, this study emphasizes the significance of GONPs transport within porous media and outlines potential objectives for subsequent studies. Several recommendations for future research directions are proposed based on the findings and aspects outlined in the reviewed literature to facilitate subsequent investigations.

Dual acid-base catalysis with biologically modified graphene oxide: a sustainable route to polyhydroquinolines with antimicrobial properties

This article conducts an in-depth examination of graphene oxide-aspartic acid (GO-As) as a novel bifunctional nano-organocatalyst distinguished by both catalytic and antibacterial properties. The research elucidates the synthesis of GO through Hummer's method, followed by the covalent attachment of aspartic acid to the surface of GO nanosheets. This innovative approach is particularly notable as it circumvents the use of hazardous chemicals, thereby promoting environmental sustainability. The newly developed catalyst underwent rigorous analysis employing a variety of spectroscopic techniques, including Fourier Transform Infrared (FT-IR) spectroscopy, Energy-Dispersive X-ray Spectroscopy (EDX), mapping, Field Emission Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and Raman spectroscopy. The findings indicate that the catalyst effectively synthesizes polyhydroquinoline derivatives while demonstrating significant stability over multiple reuse cycles, underscoring its potential applicability in organic synthesis. Furthermore, the antibacterial properties of the GO-modified aspartic acid were evaluated against six pathogenic bacterial species. The results reveal substantial antibacterial activity against both Gram-positive and Gram-negative strains, including two antibiotic-resistant bacteria: Methicillin-resistant Staphylococcus aureus (MRSA), Vancomycin-resistant Enterococcus (VRE), thermogravimetric analysis (TGA), and Raman. In conclusion, the investigation of GO-As as a bifunctional heterogeneous nano-organocatalyst represents a promising advancement in the development of environmentally friendly and effective catalysts with noteworthy antibacterial characteristics.

Applicability of the OECD Test Guideline 201 to graphene-related materials: Dispersion stability matters

Graphene-related materials (GRMs) are used in many innovative applications for their outstanding physico-chemical properties. Their possible release could have critical consequences for the environment. According to a European Union regulation, one of the test guidelines (TG) that must be applied to check the environmental hazard of new substances is the OECD TG 201 - Algae and Cyanobacteria Growth Inhibition Test. It was developed for water-soluble substances, whereas GRMs are not: dispersed in aqueous media, they tend to aggregate and settle, changing their bioavailability. This work aims to evaluate the applicability of the TG 201 to GRMs by investigating the stability of GRMs dispersions (GDS) in the TG 201 medium, focusing on the stability criterion of TG 201, i.e. maintaining ± 20 % of the nominal initial concentration. Based on flow-cytometry, Turbiscan and Utermöhl sedimentation chamber measurements, the following factors were tested: (i) particle composition and (ii) concentration; (iii) application of turbulence; (iv) addition of dispersants; (v) presence/absence of the target organism. Strong agglomeration/aggregation and sedimentation phenomena were observed for all materials under all tested conditions, thus the stability criterion of TG 201 was not met. Nevertheless, this can be satisfied by allowing an adequate period of time (approx. 6 h) for the GRM dispersion to stabilize after its preparation. Only then, a detailed physico-chemical characterization of the suspended material is required, which must be reiterated at the end of the test.

Environmental remediation and sustainable design of iron oxide nanoparticles for removal of petroleum-derived pollutants from water: A critical review

The global problem of major oil spills not only generates crude oil pollution, but produces many derivatives that pose ecological and human health challenges. While extensive research has focused on understanding the types of these contaminants, their transport modes, detection techniques, and ecotoxicological impacts, there are still significant research gaps in mechanisms for removal of petroleum-derived pollutants by iron oxide nanoparticles (IONPs). This work summarizes systematically the types and green synthesis of IONPs for the environmental remediation of various petroleum contaminants. We also provide comprehensive coverage of the excellent removal capacity and latest environmental remediation of IONPs-based materials (e.g., pristine, modified, or porous-supported IONPs materials) for the removal of petroleum-derived pollutants, potential interaction mechanisms (e.g., adsorption, photocatalytic oxidation, and synergistic biodegradation). A sustainable framework was highlighted in depth based on a careful assessment of the environmental impacts, associated hazards, and economic viability. Finally, the review provides an possible improvements of IONPs for petroleum-derived pollutants remediation and sustainable design on future prospect. In the current global environment of pollution reduction and carbon reduction, this information is very important for researchers to synthesize and screen suitable IONPs for the control and eradication of future petroleum-based pollutants with low environmental impact.

Unveiling the critical roles of nascent MnO2 in accelerating permanganate carbocatalysis

To probe the underlying mechanisms of carbocatalysis in enhanced permanganate (PM) oxidation and identify the exact roles of nascent MnO2, graphene aerogels (GA) were fabricated to activate PM for naproxen (NPX) degradation. All the three GA samples could accelerate NPX oxidation by PM, the rate constants and reaction stoichiometric efficiency (RSE) followed the order of GA900 > GA600 > GA300. Mechanistic studies revealed that Mn(VI), Mn(V) and Mn(III) were not the major reactive species involved in NPX oxidation, but highlighted the essential contribution of electron transfer pathway (ETP) mediated directly by GA and indirectly by nascent MnO2. For GA300 with strong electron-donating capability, it mainly served as the electron donor for PM decomposition, and indirectly oxidized NPX via nascent MnO2 mediated ETP, thereby exhibiting inferior RSE as well as mediocre recycling performance. GA600 and GA900 could serve as the electron shuttle to directly mediate the ETP for NPX degradation, the nascent MnO2 accumulated on GA framework during the reaction would also mediate the ETP from NPX to PM, thus displaying an obvious accelerating recycling performance. This work provides novel insights into the structure-dominated PM carbocatalysis, which contributes better to development of promising carbocatalysts and utilization of nascent MnO2.

Environmental applications and risks of engineered nanomaterials in removing petroleum oil in soil

Oil-contaminated soil posed serious threats to the ecosystems and human health. The unique and tunable properties of engineered nanomaterials (ENMs) enable new technologies for removing and repairing oil-contaminated soil. However, few studies systematically examined the linkage between the change of physicochemical properties and the removal efficiency and environmental functions (e.g., potential risk) of ENMs, which is vital for understanding the ENMs environmental sustainability and utilization as a safety product. Thus, this review briefly summarized the environmental applications of ENMs to removing petroleum oil from complex soil systems: Theoretical and practical fundamentals (e.g., excellent physicochemical properties, environmental stability, controlled release, and recycling technologies), and various ENMs (e.g., iron-based, carbon-based, and metal oxides nanomaterials) remediation case studies. Afterward, this review highlights the removing mechanism (e.g., adsorption, photocatalysis, oxidation/reduction, biodegradation) and the impact factor (e.g., nanomaterials species, natural organic matter, and soil matrix) of ENMs during the remediation process in soil ecosystems. Both positive and negative effects of ENMs on terrestrial organisms have been identified, which are mainly derived from their diverse physicochemical properties. In linking nanotechnology applications for repairing oil-contaminated soil back to the physical and chemical properties of ENMs, this critical review aims to raise the research attention on using ENMs as a fundamental guide or even tool to advance soil treatment technologies.

Prevention is better than a cure: A 'zero residual nanoadsorbent toxicity' downstream from its effluent exit point

Here, we offer thoughts concerning a 'zero residual nanoadsorbent toxicity' environmental policy which we strongly advocate. Our discussions in support of this policy are based on the adage 'Prevention is better than cure'. Besides emphasizing the need for strict regulations (regional and international), research and development avenues are highlighted for the technology that can achieve 'zero tolerance' for residual nanoadsorbent levels escaping and building up in receiving ecosystems. We do not oppose nanoadsorbents. On the contrary, their water and wastewater purification potentials are well recognized. However, they should not be permitted to translocate downstream from the exit point of a final effluent.

Microbial response to the chronic toxicity effect of graphene and graphene oxide nanomaterials within aerobic granular sludge systems

Nanomaterials present in wastewater can pose a significant threat to aerobic granular sludge (AGS) systems. Herein, we found that compared to graphene nanomaterials (G-NMs), the long-term presence (95 days) of graphene oxide nanomaterials (GO-NMs) resulted in an increased proliferation of filamentous bacteria, poorer sedimentation performance (SVI30 of 74.1 mL/g) and smaller average particle size (1224.4 µm) of the AGS. In particular, the GO-NMs posed a more significant inhibitory effect to the total nitrogen removal efficiency of AGS (decreased by 14.3 %), especially for the denitrification process. The substantial accumulation of GO-NMs within the sludge matrix resulted in a higher level of reactive oxygen species in AGS compared to G-NMs, thereby inducing lactate dehydrogenase release, and enhancing superoxide oxidase and catalase activities. Such excessive oxidative stress could potentially result in a significant reduction in the activity of nitrogen metabolism enzymes (e.g., nitrate reductase and nitrite reductase) and the expression of key functional genes (e.g., nirS and nirK). Altogether, compared to G-NMs, prolonged exposure to GO-NMs had a more significant chronic toxicity effect on AGS systems. These findings implied that the presence of G-NMs and GO-NMs is a hidden danger to biological nitrogen removal and should receive more attention.

Seed priming with graphene oxide improves salinity tolerance and increases productivity of peanut through modulating multiple physiological processes

Graphene oxide (GO), beyond its specialized industrial applications, is rapidly gaining prominence as a nanomaterial for modern agriculture. However, its specific effects on seed priming for salinity tolerance and yield formation in crops remain elusive. Under both pot-grown and field-grown conditions, this study combined physiological indices with transcriptomics and metabolomics to investigate how GO affects seed germination, seedling salinity tolerance, and peanut pod yield. Peanut seeds were firstly treated with 400 mg L⁻¹ GO (termed GO priming). At seed germination stage, GO-primed seeds exhibited higher germination rate and percentage of seeds with radicals breaking through the testa. Meanwhile, omics analyses revealed significant enrichment in pathways associated with carbon and nitrogen metabolisms in GO-primed seeds. At seedling stage, GO priming contributed to strengthening plant growth, enhancing photosynthesis, maintaining the integrity of plasma membrane, and promoting the nutrient accumulation in peanut seedlings under 200 mM NaCl stress. Moreover, GO priming increased the activities of antioxidant enzymes, along with reduced the accumulation of reactive oxygen species (ROS) in response to salinity stress. Furthermore, the differentially expressed genes (DEGs) and differentially accumulated metabolites (DAMs) of peanut seedlings under GO priming were mainly related to photosynthesis, phytohormones, antioxidant system, and carbon and nitrogen metabolisms in response to soil salinity. At maturity, GO priming showed an average increase in peanut pod yield by 12.91% compared with non-primed control. Collectively, our findings demonstrated that GO plays distinguish roles in enhancing seed germination, mitigating salinity stress, and boosting pod yield in peanut plants via modulating multiple physiological processes.

Photo-transformation of graphene oxide in synthetic and natural waters

Graphene oxide (GO) is widely employed due to its outstanding properties, leading to an increasing release into the environment and natural waters. Although some studies have reported on the photo-transformation of GO, its behavior in complex natural waters remains inadequately explored. This study demonstrates that different types of ions may promote the photoreduction of GO in the order of Ca2+ > K+ > NO3- > Na+ by interacting with the functional groups on the surface of GO, and the photoreduction is enhanced with increasing ion concentrations. Additionally, natural organic matter (NOM) can inhibit the photoreduction of GO by scavenging reactive oxygen species. However, with increasing NOM concentrations (≥ 5 mgC/L), more NOM adsorb onto the surface of GO through hydrogen bonding, Lewis acid-base interactions, and π-π interactions, thereby enhancing the photoreduction of GO. On this basis, our results further indicate that the combined effects of different ions, such as Ca2+, Mg2+, NOM, and other complex hydrochemical conditions in different natural waters can promote the photoreduction of GO, resulting in a reduction in oxygen functional groups and the formation of defects. This study provides a theoretical basis for assessing the long-term transformation and fate of GO in natural waters.

Graphene oxide inhibits the transfer of ARGs in rice by reducing the root endophytic bacterial complexity

Antibiotic resistance genes (ARGs) as an emerging contaminant have attracted much attention for their transfer in agricultural ecosystems. Meanwhile, graphene oxide (GO), due to its high adsorption capacity and antibacterial properties, poses potential environmental ecological risks to the occurrence of ARGs, bacteria, and plant physiological ecology. However, the impact and mechanism of GO on the transfer of ARGs in host plants remain unclear. Therefore, this study selected rice as the research object and inoculated Bacillus subtilis carrying ARGs to investigate the influence of GO on the migration of ARGs into rice and its microbiological mechanism. The study found that GO had a certain inhibitory effect on the transfer of ARGs in rice. Although GO reduced the rhizosphere pH in rice, leading to a transition in endophytic bacteria from dominance by Burkholderia to dominance by Gordonia, this process did not directly affect the transfer of ARGs in rice. Further analysis of bacterial interactions revealed that GO could inhibit the transfer of ARGs in rice by reducing the network complexity of endophytic bacteria. Additionally, GO inhibited the formation of endophytic bacterial biofilms and mobile elements, which might affect ARGs' migration in rice. This study elucidated the key microbiological ecological processes of GO on the transfer of ARGs in rice, providing fundamental information for the ecological risk assessment of GO.

Nanoparticle-specific transformations dictate nanoparticle effects associated with plants and implications for nanotechnology use in agriculture

Nanotechnology shows potential to promote sustainable and productive agriculture and address the growing population and food demand worldwide. However, the applications of nanotechnology are hindered by the lack of knowledge on nanoparticle (NP) transformations and the interactions between NPs and macromolecules within crops. In this Review, we discuss the beneficial and toxicity-relieving transformation products of NPs that provide agricultural benefits and the toxic and physiology-disturbing transformations that induce phytotoxicities. Based on knowledge related to the management of NP transformations and their long-term effects, we propose feasible design suggestions to attain nano-enabled efficient and sustainable agricultural applications.

Mechanisms of surface groups regulating developmental toxicity of graphene-based nanomaterials via glycerophospholipid metabolic pathway

Surface modification of graphene-based nanomaterials (GBNs) may occur in aquatic environment and during intentional preparation. However, the influence of the surface groups on the developmental toxicity of GBNs has not been determined. In this study, we evaluated the developmental toxicity of three GBNs including GO (graphene oxide), RGO (reduced GO) and RGO-N (aminated RGO) by employing zebrafish embryos at environmentally relevant concentrations (1-100 μg/L), and the underlying metabolic mechanisms were explored. The results showed that both GO and RGO-N disturbed the development of zebrafish embryos, and the adverse effect of GO was greater than that of RGO-N. Furthermore, the oxygen-containing groups of GBNs play a more important role in inducing developmental toxicity compared to size, defects and nitrogen-containing groups. Specifically, the epoxide and hydroxyl groups of GBNs increased their intrinsic oxidative potential, promoted the generation of ROS, and caused lipid peroxidation. Moreover, a significant decrease in guanosine and abnormal metabolism of multiple glycerophospholipids were observed in all three GBN-treated groups. Nevertheless, GO exposure triggered more metabolic activities related to lipid peroxidation than RGO or RGO-N exposure, and the disturbance intensity of the same metabolite was greater than that of the other two agents. These findings reveal underlying metabolic mechanisms of GBN-induced developmental toxicity.

Amino-functionalized graphene oxide affects bacteria-phage interactions in aquatic environments

The widespread use of graphene family nanomaterials (GFNs) in mass production has resulted in their release into the atmosphere, soil and water environment through various processes. Among these, the water environment is particularly affected by GFN pollution. Our previous study has demonstrated the impact of graphene oxide (GO) on bacteria-phage interactions in natural systems. However, the effects of amino-functionalized GO with a positive charge on bacteria-phage interactions in aquatic environments remain unclear. In the present study, we found that amino-functionalized graphene oxide (AGO) (0.05 mg/mL) inhibited the growth of Pseudomonas aeruginosa Y12. Furthermore, treating P. aeruginosa Y12 and phage with AGO (0.05 mg/mL) led to a reduced ratio of phage to bacteria, indicating that AGO can inhibit phage infection of bacteria. Additionally, the acidic environment exacerbated this effect by promoting electrostatic adsorption between the positively charged AGO and the negatively charged phage. Finally, a field water body intervention experiment showed that the richness and diversity of bacterial communities in six water samples changed due to AGO exposure, as revealed by Illumina analysis based on the bacterial 16S rRNA gene. These findings offer valuable insights into the environmental impacts of GFNs.

Nanochannel Stability of Chemically Converted Graphene Oxide Membranes

Chemically converted graphene oxide laminate membranes, which exhibit stable interlayered nanochannels in aqueous environments, are receiving increasing attention owing to their potential for selective water and ion permeation. However, how the molecular properties of conversion agents influence the stabilization of nanochannels and how effectively nanochannels are stabilized have rarely been studied. In this study, mono-, di-, and tri-saccharide molecules of glucose (Glu), maltose (Glu2), and maltotriose (Glu3) are utilized, respectively, to chemically modify graphene oxide (GO). The aim is to create nanochannels with different levels of stability and investigate how these functional conversion agents affect the separation performance. The effects of the property differences between different conversion agents on nanochannel stabilization are demonstrated. An agent with efficient chemical reduction of GO and limited intercalation in the resulting nanochannel ensures satisfactory nanochannel stability during desalination. The stabilized membrane nanochannel exhibits a permeance of 0.69 L m-2 h-1 bar-1 and excellent Na2SO4 rejection of 96.42%. Furthermore, this optimized membrane nanochannel demonstrates enhanced stability under varying external conditions compared to the original GO. This study provides useful information for the design of chemical conversion agents for GO nanochannel stabilization and the development of nanochannel membranes for precise separation.

Assessing the role of the graphene family nanomaterials (GFNs: Graphene, GO, rGO) in modifying the toxicity potential and environmental risk of flame retardant, tetrabromobisphenol-A (TBBPA) in the marine microalgae Chlorella sp

In recent years, a growing concern has emerged regarding the environmental implications of flame retardants (FRs) like tetrabromobisphenol-A (TBBPA) and graphene family nanomaterials (GFNs), such as graphene, graphene oxide (GO), and reduced graphene oxide (rGO), on marine biota. Despite these substances' well-established individual toxicity profiles, there is a notable gap in understanding the physicochemical interactions within the binary mixtures and consequent changes in the toxicity potential. Therefore, our research focuses on elucidating the individual and combined toxicological impacts of TBBPA and GFNs on the marine alga Chlorella sp. Employing a suite of experimental methodologies, including Raman spectroscopy, contact angle measurements, electron microscopy, and chromatography, we examined the physicochemical interplay between the GFNs and TBBPA. The toxicity potentials of individual constituents and their binary combinations were assessed through growth inhibition assays, quantifying reactive oxygen species (ROS) generation and malondialdehyde (MDA) production, photosynthetic activity analyses, and various biochemical assays. The toxicity of TBBPA and graphene-based nanomaterials (GFNs) was examined individually and in combinations. Both pristine TBBPA and GFNs showed dose-dependent toxicity. While lower TBBPA concentrations exacerbated toxicity in binary mixtures, higher TBBPA levels reduced the toxic effects compared to pristine TBBPA treatments. The principal mechanism underlying toxicity was ROS generation, resulting in membrane damage and perturbation of photosynthetic parameters. Cluster heatmap and Pearson correlation were employed to assess correlations between the biological parameters. Finally, ecological risk assessment was undertaken to evaluate environmental impacts of the individual components and the mixture in the algae.

Hydroxide-Derived Nanostructures: Scalable Synthesis, Characterization, Properties, and Potential Applications

Metal oxide nanostructures have received an increasing attention owing to their unique chemical and physical properties along with their widespread applications in various fields. This article provides an overview of the recent discovery - christened Hydroxides-Derived Nanostructures, or HDNs - in which hydroxide aqueous solutions (mostly tetramethylammonium hydroxide, TMAH) are reacted at temperatures < 100 °C and under atmospheric pressure with various metal-containing precursors to scalably prepare novel metal oxide nanostructures. In one case, a dozen commercial and earth abundant Ti-containing powders such as binary carbides, nitrides, borides, among others, are converted into new, 1D TiO2-based lepidocrocite (1DL) nanofilaments (NFs). Application-wise, the 1DLs show outstanding performance in a number of energy, environmental, and biomedical fields such as photo- and electrocatalysis, water splitting, lithium-sulfur and lithium-ion batteries, water purification, dye degradation, cancer therapy, and polymer composites. In addition to 1DL, the HDNs family encompasses other metal oxides nanostructures including magnetic Fe3O4 nanoparticles and MnO2 birnessite-based crystalline 2D flakes. The latter showed promise in electrochemical energy conversion and storage applications. The developed recipe provides a new vista in the molecular self-assembly synthesis of nanomaterials that can advance the field with a library of novel nanostructures with substantial implications in a multitude of fields.

Molecular interactions of the Omicron, Kappa, and Delta SARS-CoV-2 spike proteins with quantum dots of graphene oxide

CONTEXT

The Omicron, Kappa, and Delta variants are different strains of the SARS-CoV-2 virus. Graphene oxide quantum dots (GOQDs) represent a burgeoning class of oxygen-enriched, zero-dimensional materials characterized by their sub-20-nm dimensions. Exhibiting pronounced quantum confinement and edge effects, GOQDs manifest exceptional physical-chemical attributes. This study delves into the potential of graphene oxide quantum dots, elucidating their inherent properties pertinent to the surface structures of SARS-CoV-2, employing an integrated computational approach for the repositioning of inhibitory agents.

METHODS

Following rigorous adjustment tests, a spectrum of divergent bonding conformations emerged, with particular emphasis placed on identifying the conformation exhibiting optimal adjustment scores and interactions. The investigation employed molecular docking simulations integrating affinity energy evaluations, electrostatic potential clouds, molecular dynamics encompassing average square root calculations, and the computation of Gibbs-free energy. These values quantify the strength of interaction between GOQDs and SARS-CoV-2 spike protein variants. The receptor structures were optimized using the CHARM-GUI server employing force field AMBERFF14SB. The algorithm embedded in CHARMM offers an efficient interpolation scheme and automatic step size selection, enhancing the efficiency of the optimization process. The 3D structures of the ligands are constructed and optimized with density functional theory (DFT) method based on the most stable conformer of each binder. Autodock Vina Software (ADV) was utilized, where essential parameters were specified. Electrostatic potential maps (MEPs) provide a visual depiction of molecules' charge distributions and related properties. After this, molecular dynamics simulations employing the CHARM36 force field in Gromacs 2022.2 were conducted to investigate GOs' interactions with surface macromolecules of SARS-CoV-2 in an explicit aqueous environment. Furthermore, our investigation suggests that lower values indicate stronger binding. Notably, GO-E consistently showed the most negative values across interactions with different variants, suggesting a higher affinity compared to other GOQDs (GO-A to GO-D).

Exploring the effective adsorption of polystyrene microplastics from aqueous solution with magnetically separable nickel/reduced graphene oxide (Ni/rGO) nanocomposite

Microplastics (MPs) are a potential threat to both humans and aquatic environment as they serve as carriers of various contaminants necessitating the development of reliable, efficient, and ecofriendly techniques to remove MPs from water. In this study, reduced graphene oxide (rGO) magnetized using nickel nanoparticles was utilized as a potent adsorbent for the effective removal of microplastics from water. The synthesized nickel/reduced graphene oxide (Ni/rGO) nanocomposite was characterized by X-ray diffraction (XRD), Raman spectra, vibrating sample magnetometer (VSM), scanning electron microscopy-energy-dispersive X-ray analysis (SEM-EDX), thermogravimetric analysis, and Brunauer-Emmett Teller (BET) analysis. Magnetic Ni/rGO nanocomposite exhibited significant adsorption capability for polystyrene (PS) microspheres allowing the formation of PS-Ni/rGO complex which can be easily separated out using a magnet. The SEM images of PS-Ni/rGO complex confirmed the adsorption of PS microspheres onto the nano adsorbent due to hydrophobic interaction. The adsorbent demonstrated a maximum adsorption capacity of 1250 mg/g. The analysis of isotherm and kinetic models demonstrated that the adsorption mechanism conformed to the Langmuir isotherm and followed pseudo second order kinetics. This study paves a new pathway for the application of magnetically modified reduced graphene oxide for the expedient removal of microplastics from water with the ease of separation using a magnet. The adsorbent was recycled and reused for three times.

Nanoscience and nanotechnology for water remediation: an earnest hope toward sustainability

Water pollution and the global freshwater crisis are the most alarming concerns of the 21st century, as they threaten the sustainability and ecological balance of the environment. The growth of global population, climate change, and expansion of industrial processes are the main causes of these issues. Therefore, effective remediation of polluted water by means of detoxification and purification is of paramount importance. To this end, nanoscience and nanotechnology have emerged as viable options that hold tremendous potential toward the advancement of wastewater treatment methods to enhance treatment efficiency along with augmenting water supply via utilization of unconventional water sources. Materials at the nano level have shown great promise toward water treatment applications owing to their unique physicochemical properties. In this focus article, we highlight the role of new fundamental properties at the nano scale and material properties that are drastically increased due to the nano dimension (e.g. volume-surface ratio) and highlight their impact and potential toward water treatment. We identify and discuss how nano-properties could improve the three main domains of water remediation: the identification of pollutants, their adsorption and catalytic degradation. After discussing all the beneficial aspects we further discuss the key challenges associated with nanomaterials for water treatment. Looking at the current state-of-the-art, the potential as well as the challenges of nanomaterials, we believe that in the future we will see a significant impact of these materials on many water remediation strategies.

Identifying the Stripping of Oxide Debris from Graphene Oxide: Evidence from Experimental Analysis and Molecular Simulation

In this study, characteristics of oxidation debris (OD) and its stripping mechanism from graphene oxide (GO) were explored. The results demonstrated that OD contains three components, namely, protein-, fulvic acid-, and humic acid-like substances; among these, protein-like substances with lower molecular weight and higher hydrophilicity were most liable to be stripped from GO and were the primary components stripped from GO at pH < 10, whereas humic acid- and fulvic acid-like substances were stripped from GO at pH > 10. During the stripping of OD, hydrogen bonds from carboxyl and carbonyl were the first to break, followed by hydrogen bonds from epoxy. Subsequently, π-π interactions were broken, and hydrogen bond interactions induced by hydroxyl groups were the hardest to break. After the stripping of OD, the recombination of OD on GO was observed, and regions containing relatively fewer oxygen-containing functional groups were favorable binding sites for the readsorbed OD. The stripping and recombination of OD on GO resulted in an uneven GO surface, which should be considered during the development of GO-based environmental materials and the evaluation of their environmental behavior.

Carbon nanotubes and nanofibers seen as emerging threat to fish: Historical review and trends

Since the discovery of the third allotropic carbon form, carbon-based one-dimensional nanomaterials (1D-CNMs) became an attractive and new technology with different applications that range from electronics to biomedical and environmental technologies. Despite their broad application, data on environmental risks remain limited. Fish are widely used in ecotoxicological studies and biomonitoring programs. Thus, the aim of the current study was to summarize and critically analyze the literature focused on investigating the bioaccumulation and ecotoxicological impacts of 1D-CNMs (carbon nanotubes and nanofibers) on different fish species. In total, 93 articles were summarized and analyzed by taking into consideration the following aspects: bioaccumulation, trophic transfer, genotoxicity, mutagenicity, organ-specific toxicity, oxidative stress, neurotoxicity and behavioral changes. Results have evidenced that the analyzed studies were mainly carried out with multi-walled carbon nanotubes, which were followed by single-walled nanotubes and nanofibers. Zebrafish (Danio rerio) was the main fish species used as model system. CNMs' ecotoxicity in fish depends on their physicochemical features, functionalization, experimental design (e.g. exposure time, concentration, exposure type), as well as on fish species and developmental stage. CNMs' action mechanism and toxicity in fish are associated with oxidative stress, genotoxicity, hepatotoxicity and cardiotoxicity. Overall, fish are a suitable model system to assess the ecotoxicity of, and the environmental risk posed by, CNMs.

Unveiling the contemporary progress of graphene-based nanomaterials with a particular focus on the removal of contaminants from water: a comprehensive review

Water scarcity and pollution pose significant challenges to global environmental sustainability and public health. As these concerns intensify, the quest for innovative and efficient water treatment technologies becomes paramount. In recent years, graphene-based nanomaterials have emerged as frontrunners in this pursuit, showcasing exceptional properties that hold immense promise for addressing water contamination issues. Graphene, a single layer of carbon atoms arranged in a hexagonal lattice, exhibits extraordinary mechanical, electrical, and chemical properties. These inherent characteristics have led to a surge of interest in leveraging graphene derivatives, such as graphene oxide (GO), reduced graphene oxide and functionalized graphene, for water treatment applications. The ability of graphene-based nanomaterials to adsorb, catalyze, and photocatalyze contaminants makes them highly versatile in addressing diverse pollutants present in water sources. This review will delve into the synthesis methods employed for graphene-based nanomaterials and explore the structural modifications and functionalization strategies implemented to increase their pollutant removal performance in water treatment. By offering a critical analysis of existing literature and highlighting recent innovations, it will guide future research toward the rational design and optimization of graphene-based nanomaterials for water decontamination. The exploration of interdisciplinary approaches and cutting-edge technologies underscores the evolving landscape of graphene-based water treatment, fostering a path toward sustainable and scalable solutions. Overall, the authors believe that this review will serve as a valuable resource for researchers, engineers, and policymakers working toward sustainable and effective solutions for water purification.

Tissue-specific toxic effects of nano-copper on zebrafish

Understanding the behavior and potential toxicity of copper nanoparticles (nano-Cu) in the aquatic environment is a primary way to assess their environmental risks. In this study, RNA-seq was performed on three different tissues (gills, intestines, and muscles) of zebrafish exposed to nano-Cu, to explore the potential toxic mechanism of nano-Cu on zebrafish. The results indicated that the toxic mechanism of nano-Cu on zebrafish was tissue-specific. Nano-Cu enables the CB1 receptor of the presynaptic membrane of gill cells to affect short-term synaptic plasticity or long-term synaptic changes (ECB-LTD) through DSI and DSE, causing dysfunction of intercellular signal transmission. Imbalance of de novo synthesis of UMP in intestinal cells and its transformation to UDP, UTP, uridine, and uracil, resulted in many functions involved in the pyrimidine metabolic pathway being blocked. Meanwhile, the toxicity of nano-Cu caused abnormal expression of RAD51 gene in muscle cells, which affects the repair of damaged DNA through Fanconi anemia and homologous recombination pathway, thus causing cell cycle disorder. These results provide insights for us to better understand the differences in toxicity of nano-Cu on zebrafish tissues and are helpful for a comprehensive assessment of nano-Cu's effects on aquatic organisms.

EPS-corona formation on graphene family nanomaterials (GO, rGO and graphene) and its role in mitigating their toxic effects in the marine alga Chlorella sp

GFNs have widespread applications but can harm marine systems due to excessive use and improper disposal. Algae-secreted EPS can mitigate nanomaterial harm, but their impact on GFN toxicity is understudied. Hence, in the present study, we investigated the toxicity of three GFNs, graphene oxide (GO), reduced graphene oxide (rGO), and graphene, in pristine and EPS-adsorbed forms in the marine alga Chlorella sp. At an environmentally relevant concentration of 1 mgL-1, all three GFNs induced considerable oxidative stress and impeded growth and photosynthetic activity of the algae. The order of the toxic potential followed GO > rGO > graphene. The various facets of adsorption of EPS (1:1 mixture of loosely bound, and tightly bound EPS) on GFNs were investigated through microscopy, surface chemical analyses, fluorescence quenching studies, and isotherm and kinetics studies. Amongst the pristine GFNs treated with algal cells, GO was found to exert the maximum negative effects on algal growth. Upon adsorption of EPS over the GFNs, a significant decline in growth inhibition was observed compared to the respective pristine forms which strongly correlated with reduced oxidative stress and enhanced photosynthetic parameters in the cells. The formation of a layer of eco-corona after interaction of GFNs with EPS possibly caused a barrier effect which in turn diminished their toxic potential. The findings from the present investigation offer valuable insights into the environmental toxicity of GFNs and show that the eco-corona formation may lessen the risk posed by these materials in the marine environment.

Removal of fluorouracil from aqueous environment using magnetite graphene oxide modified with γ-cyclodextrin

Fluorouracil (FU) is a widely utilized antineoplastic medication in the pharmaceutical industry for combating gastrointestinal cancers. However, its presence in wastewater originating from pharmaceutical facilities and hospital effluents has a potential effect on DNA, and cannot be efficiently eliminated through conventional treatment methods. Consequently, the adoption of advanced technologies becomes crucial for effectively treating such wastewater. Accordingly, this study investigated the efficiency of magnetite graphene oxide nanocomposite functionalized with γ-cyclodextrin for removing fluorouracil from aqueous solutions. The magnetite graphene oxide nanocomposite functionalized with γ-cyclodextrin was synthesized via the hydrothermal method. Next, the effect of pH, temperature, adsorbent content, and contact time on the fluorouracil removal efficiency was explored. Ultimately, the experimental data were matched against Langmuir, Freundlich, and Temkin isotherms and Kinetic models. Accordingly, the efficiency of the absorbent used was dependent on the pH, contact time, temperature, and initial concentration of the adsorbent. The results indicated that the maximum removal efficiency for fluorouracil was achieved within the contact time of 45 min and adsorbent content of 0.020 g. In addition, the optimal pH for removing the medicine was 7. The conditions of the adsorption process followed Langmuir isotherm with correlation coefficients of 0.992 and a quasi-second kinetic model with a correlation coefficient of 0.999, with the maximum adsorption capacity of the adsorbent synthesized for the evaluated medicine estimated as 190.9 mg/g. The results showed that the magnetite graphene oxide nanocomposite functionalized with γ-cyclodextrin could be used as an effective and available adsorbent for removing fluorouracil from pharmaceutical wastewater.

In the View of Electrons Transfer and Energy Conversion: The Antimicrobial Activity and Cytotoxicity of Metal-Based Nanomaterials and Their Applications

The global pandemic and excessive use of antibiotics have raised concerns about environmental health, and efforts are being made to develop alternative bactericidal agents for disinfection. Metal-based nanomaterials and their derivatives have emerged as promising candidates for antibacterial agents due to their broad-spectrum antibacterial activity, environmental friendliness, and excellent biocompatibility. However, the reported antibacterial mechanisms of these materials are complex and lack a comprehensive understanding from a coherent perspective. To address this issue, a new perspective is proposed in this review to demonstrate the toxic mechanisms and antibacterial activities of metal-based nanomaterials in terms of energy conversion and electron transfer. First, the antimicrobial mechanisms of different metal-based nanomaterials are discussed, and advanced research progresses are summarized. Then, the biological intelligence applications of these materials, such as biomedical implants, stimuli-responsive electronic devices, and biological monitoring, are concluded based on trappable electrical signals from electron transfer. Finally, current improvement strategies, future challenges, and possible resolutions are outlined to provide new insights into understanding the antimicrobial behaviors of metal-based materials and offer valuable inspiration and instructional suggestions for building future intelligent environmental health.

Life-cycle risk assessment of graphene-enabled textiles in fire protection gear

A nanomaterial life-cycle risk assessment (Nano LCRA) of a graphene-enabled textile used in the construction of heat and fire-resistant personal protective equipment (PPE) was conducted to develop, analyze, and prioritize potential occupational, health and environmental risks. The analysis identifies potential receptors and exposure pathways at each product life-cycle stage and makes a qualitative evaluation of the potential significance of each scenario. A literature review, quality evaluation, and database were developed as part of the LCRA to identify potential hazards associated with graphene-based materials (GBMs) throughout the product life-cycle. Generally, risks identified from graphene-enabled textiles were low. Of the developed exposure scenarios, occupational inhalation exposures during raw material and product manufacturing ranked highest. The analysis identifies the key potential human and environmental hazards and exposures of the products across the product life-cycle of graphene enabled textiles. Priority research gaps to reduce uncertainty include evaluating long-term, low dose graphene exposures typical of the workplace, as well as the potential release and hazard characterization of graphene-acrylic nanocomposites.

Graphene-based nanomaterials for peripheral nerve regeneration

Emerging nanotechnologies offer numerous opportunities in the field of regenerative medicine and have been widely explored to design novel scaffolds for the regeneration and stimulation of nerve tissue. In this review, we focus on peripheral nerve regeneration. First, we introduce the biomedical problem and the present status of nerve conduits that can be used to guide, fasten and enhance regeneration. Then, we thoroughly discuss graphene as an emerging candidate in nerve tissue engineering, in light of its chemical, tribological and electrical properties. We introduce the graphene forms commonly used as neural interfaces, briefly review their applications, and discuss their potential toxicity. We then focus on the adoption of graphene in peripheral nervous system applications, a research field that has gained in the last years ever-increasing attention. We discuss the potential integration of graphene in guidance conduits, and critically review graphene interaction not only with peripheral neurons, but also with non-neural cells involved in nerve regeneration; indeed, the latter have recently emerged as central players in modulating the immune and inflammatory response and accelerating the growth of new tissue.

Visual mapping of global nanoplastics research progresses and hotspots: a scientometric assessment analysis

Environmental plastic wastes are continuously degraded into microplastics (MPs) and nanoplastics (NPs); the latter are more potentially harmful to organisms and human health as their smaller size and higher surface-to-volume ratio. Previous reviews on NPs mainly concentrate on specific aspects, such as sources, environmental behavior, and toxicological effects, but few focused on NPs-related scientific publications from a global point of view. Therefore, this bibliometric study aims to summarize the research themes and trends on NPs and also propose potential directions for future inquiry. Related papers were downloaded from the Web of Science Core Collection database on NPs published from 2008 to 2021, and then retrieved information was analyzed using CiteSpace 6.1 R2 and VOSviewer (version 1.6.). Research on NPs mainly involved environmental behaviors, toxicological effects, identification and extraction of NPs, whereas aquatic environments, especially marine systems, attracted more attentions from these scientists compare to terrestrial environments. Furthermore, the adsorption behavior of pollutants by NPs and the toxicological effects of organisms exposed to NPs are the present hotspots, while the regulation of humic acid (HA) on NPs behaviors and the environmental behavior of NPs in freshwater, like rivers and lakes, are the frontier areas of research. This study also explored the possible opportunities and challenges that may be faced in NPs research, which provide a valuable summary and outlook for ongoing NPs-related research, which may be of intrigue and noteworthiness for relevant researchers.

Mineralization of Few-Layer Graphene Made It Bioavailable in Chlamydomonas reinhardtii

Numerous studies have emphasized the toxicity of graphene-based nanomaterials to algae, however, the fundamental behavior and processes of graphene in biological hosts, including its transportation, metabolization, and bioavailability, are still not well understood. As photosynthetic organisms, algae are key contributors to carbon fixation and may play an important role in the fate of graphene. This study investigated the biological fate of 14C-labeled few-layer graphene (14C-FLG) in Chlamydomonas reinhardtii (C. reinhardtii). The results showed that 14C-FLG was taken up by C. reinhardtii and then translocated into its chloroplast. Metabolomic analysis revealed that 14C-FLG altered the metabolic profiles (including sugar metabolism, fatty acid, and tricarboxylic acid cycle) of C. reinhardtii, which promoted the photosynthesis of C. reinhardtii and then enhanced their growth. More importantly, the internalized 14C-FLG was metabolized into 14CO2, which was then used to participate in the metabolic processes required for life. Approximately 61.63%, 25.31%, and 13.06% of the total radioactivity (from 14CO2) was detected in carbohydrates, lipids, and proteins of algae, respectively. Overall, these results reveal the role of algae in the fate of graphene and highlight the potential of available graphene in bringing biological effects to algae, which helps to better assess the environmental risks of graphene.

Engineering the surface of Nbn+1CnTx MXenes to versatile bio-activity towards microorganisms

Two-dimensional (2D) transition metal carbides/nitrides (MXenes) are potential antibacterial agents. However, their activity against microorganisms is not fully understood. It could relate to MXenes' surface which further influences their biocidal action. Herein, we report no continuous biocidal activity for delaminated 2D niobium-based MXenes (Nbn+1XnTx) such as Nb2CTx and Nb4C3Tx prepared with HF/TMAOH protocol. Biocidal activity towards Bacillus subtilis and Staphylococcus aureus microorganisms was achieved by surface-functionalization with lysozyme macromolecule. MXenes' engineering with lysozyme changed MXene's surface charge from negative into positive thus enabling the elimination of bacteria cells during 48 h of incubation. In contrast, Nb4C3Tx functionalized with collagen stimulated the growth of Bacillus subtilis by 225 %, showing MXene's biocompatibility towards this particular strain. Altogether, our results show that MXenes are incredibly bio-tunable. Opposing bio-effects such as antimicrobial or growth-stimulating can be achieved towards various microorganisms with rational surface engineering.

Environmental biotechnology and the involving biological process using graphene-based biocompatible material

Biotechnology is a promising approach to environmental remediation but requires improvement in efficiency and convenience. The improvement of biotechnology has been illustrated with the help of biocompatible materials as biocarrier for environmental remediations. Recently, graphene-based materials (GBMs) have become promising materials in environmental biotechnology. To better illustrate the principle and mechanisms of GBM application in biotechnology, the comprehension of the biological response of microorganisms and enzymes when facing the GBMs is needed. The review illustrated distinct GBM-microbe/enzyme composites by providing the GBM-microbe/enzyme interaction and the determining factors. There are diverse GBM modifications for distinct biotechnology applications. Each of these methods and applications depends on the physicochemical properties of GBMs. The applications of these composites were mainly categorized as pollutant adsorption, anaerobic digestion, microbial fuel cells, and organics degradation. Where information was available, the strategies and mechanisms of GBMs in improving application efficacies were also demonstrated. In addition, the biological response, from microbial community changes, extracellular polymeric substances changes to biological pathway alteration, may become important in the application of these composites. Furthermore, we also discuss challenges facing the environmental application of GBMs, considering their fate and toxicity in the ecosystem, and offer potential solutions. This research significantly enhances our comprehension of the fundamental principles, underlying mechanisms, and biological pathways for the in-situ utilization of GBMs.

Enzymatic functionalization of liquid phase exfoliated graphene using horseradish peroxidase and laccase

We present a novel approach for the enzymatic functionalization of graphene, utilizing horseradish peroxidase (HPO) and laccase (LC) from Trametes versicolor. This study demonstrates, for the first time, the covalent modification of non-homogeneous graphene with a low surface-to-volume ratio, both in solution and on solid support. Through thermogravimetry analysis, we estimate the degree of functionalization to be 11% with HPO and 4% with LC, attributed to the varying redox potentials of the enzymes. This work highlights the potential of enzymatic reactions for tailored functionalization of graphene under mild conditions.

Graphene nanoparticles improve alfalfa (Medicago sativa L.) growth through multiple metabolic pathways under salinity-stressed environment

Graphene, one of the emerging carbon nanomaterials, has many advantages and applications. Salinity stress seriously affects ecology and agroforestry worldwide. The effects of graphene on alfalfa under salinity stress were investigated. The results indicated that graphene promoted alfalfa growth under non-salinity stress but caused some degree of damage to root cells and leaf parameters. Graphene used in salinity stress had a positive effect on growth parameters, chlorophyll, photosynthetic gas parameters, stomatal opening, ion balance, osmotic homeostasis, cell membrane integrity and antioxidant system, while it decreased Na+, lipid peroxidation and reactive oxygen species levels. Correlation analysis revealed that most of the parameters were significantly correlated; and principal component analysis indicated that the first two dimensions (78.1% and 4.1%) explained 82.2% of the total variability, and the majority of them exceeded the average contribution. Additionally, Gene Ontology functional enrichment analysis and Kyoto Encyclopedia of Genes and Genomes signaling pathway enrichment analysis showed that there were numerous differentially expressed genes and pathways to regulate alfalfa responding to salinity stress. Taken together, the findings reveal that graphene does not enter the plant, but improves the properties and adsorption of soil to enhance salt tolerance and seedling growth of alfalfa through morphological, physiological, biochemical, and transcriptomic aspects. Furthermore, this study provides a reference for the application of graphene to improve soil environment and agricultural production.

Predicting adsorption of organic compounds onto graphene and black phosphorus by molecular dynamics and machine learning

With an increase in production and application of various engineering nanomaterials (ENMs), they will inevitably be released into the environment. Adsorption of various organic chemicals onto ENMs will impact on their environmental behavior and toxicology. It is unrealistic to experimentally determine adsorption equilibrium constants (K) for the vast number of organics and ENMs due to high cost in expenditure and time. Herein, appropriate molecular dynamics (MD) methods were evaluated and selected by comparing experimental K values of seven organics adsorbed onto graphene with the MD-calculated ones. Machine learning (ML) models on K of organics adsorption onto graphene and black phosphorus nanomaterials were constructed based on a benchmark data set from the MD simulations. Lasso models based on Mordred descriptors outperformed ML models built by support vector machine, random forest, k-nearest neighbor, and gradient boosting decision tree, in terms of cross-validation coefficients (Q2 > 0.90). The Lasso models also outperformed conventional poly-parameter linear free energy relationship models for predicting logK. Compared with previous models, the Lasso models considered more compounds with different functional groups and thus have broader applicability domains. This study provides a promising way to fill the data gap in logK for chemicals adsorbed onto the ENMs.

The Potentiating Effect of Graphene Oxide on the Arylhydrocarbon Receptor (AhR)-Cytochrome P4501A (Cyp1A) System Activated by Benzo(k)fluoranthene (BkF) in Rainbow Trout Cell Line

The increasing use of graphene oxide (GO) will result in its release into the environment; therefore, it is essential to determine its final fate and possible metabolism by organisms. The objective of this study was to assess the possible role of the aryl hydrocarbon receptor (AhR)-dependent cytochrome P4501A (Cyp1A) detoxification activities on the catabolism of GO. Our hypothesis is that GO cannot initially interact with the AhR, but that after an initial degradation caused by other mechanisms, small fractions of GO could activate the AhR, inducing Cyp1A. The environmental pollutant benzo(k)fluoranthene (BkF) was used for the initial activation of the AhR in the rainbow trout (Oncorhynchus mykiss) cell line RTL-W1. Pre-, co-, and post-exposure experiments with GO were performed and Cyp1A induction was monitored. The strong stimulation of Cyp1A observed in cells after exposure to GO, when BkF levels were not detected in the system, suggests a direct action of GO. The role of the AhR was confirmed by a blockage of the observed effects in co-treatment experiments with αNF (an AhR antagonist). These results suggest a possible role for the AhR and Cyp1A system in the cellular metabolism of GO and that GO could modulate the toxicity of environmental pollutants.

Effects of photochlorination on the physicochemical transformation of polystyrene nanoplastics: Mechanism and environmental fate

With the increasingly severe plastic pollution, the environmental behavior and effects of nanoplastics (NPs) have attracted much attention. The transformation of NPs in natural and engineered environments (e.g., photooxidation, disinfection) can significantly alter the physicochemical properties and thus affect the fate and toxicity of NPs. However, how solar irradiation with free chlorine, an inevitable process once NPs enter the environment from wastewater treatment plants, affects the physicochemical properties of NPs is still unclear. In this study, the behavior and mechanism of polystyrene (PS) NPs transformation in the solar/chlorine process were evaluated. The results demonstrated that solar irradiation significantly enhanced the physicochemical transformation of PS NPs during chlorination, including chain scission, surface oxidation, and organic release. In addition, two-dimensional correlation spectroscopy analysis using Fourier transform infrared spectroscopy and reactive species quenching experiments showed that chain scission and surface oxidation of PS NPs were primarily caused by direct oxidation of hydroxyl radicals and ozone, while reactive chlorine species played an indirect role. Moreover, photochlorination-induced changes in the properties of PS NPs enhanced the colloidal stability in synthetic wastewater solution and toxicity to Caenorhabditis elegans. These findings reveal an important transformation behavior of nanoplastics in the environment and emphasize the importance of accounting for photochlorination to accurately assess the ecological risk of nanoplastics.

Functional graphene oxide for organic pollutants removal from wastewater: a mini review

Graphene oxide (GO), an important derivative of graphene, with a variety of active oxygen-containing groups (hydroxyl, carboxyl and epoxy) on its surface is easy to be functionalized to obtain adsorbent with high adsorption capacity. To date, the adsorption behaviour of organic pollutants by functionalized GO adsorbents have been extensively studied, but there has been no systematic review regarding the functionalization method of GO for the purpose to remove organic pollutants from wastewater. The leading objective of this review is to (i) summarize the functionalization strategies of GO for organic pollutants removal (covalent functionalization and non-covalent functionalization), (ii) evaluate the adsorption performance of functional GO towards organic pollutants by taking aromatic pollutants and dyes as examples and (iii) discuss the regeneration property and adsorption mechanism of functional GO adsorbent. In addition, the problems of existing studies and future research directions are also identified briefly.

Effect of molecular structure on the adsorption behavior of sulfanilamide antibiotics on crumpled graphene balls

Since the 1930s, sulfonamide(SA)-based antibiotics have served as important pharmaceuticals, but their widespread detection in water systems threatens aquatic organisms and human health. Adsorption via graphene, its modified form (graphene oxide, GO), and related nanocomposites is a promising method to remove SAs, owing to the strong and selective surface affinity of graphene/GO with aromatic compounds. However, a deeper understanding of the mechanisms of interaction between the chemical structure of SAs and the GO surface is required to predict the performance of GO-based nanostructured materials to adsorb the individual chemicals making up this large class of pharmaceuticals. In this research, we studied the adsorptive performance of 3D crumpled graphene balls (CGBs) to remove 10 SAs and 13 structural analogs from water. The maximum adsorption capacity qm of SAs on CGB increased with the number of (1) aromatic rings; (2) electron-donating functional groups; (3) hydrogen bonding acceptor sites. Furthermore, the CGB surface displayed a preference for homocyclic relative to heterocyclic aromatic structures. A leading mechanism, π-π electron-donor-acceptor interaction, combined with hydrogen bonding, explains these trends. We developed a multiple linear regression model capable of predicting the qm as a function of SA chemical structure and properties and the oxidation level of CGB. The model predicted the adsorptive behaviors of SAs well with the exception of a chlorinated/fluorinated SA. The insights afforded by these experiments and modeling will aid in tailoring graphene-based adsorbents to remove micropollutants from water and reduce the growing public health threats associated with antibiotic resistance and endocrine-disrupting chemicals.

In vivo study on borophene nanoflakes interaction with Tenebrio molitor beetle: viability of hemocytes and short-term immunity effect

The family of graphene-based materials welcomed a new member, borophene, in 2014. Research on synthesis routes and experimental study on physicochemical and biological (especially in vivo) properties still is strongly desired in order to evaluate its practical potential as a drug delivery-system. The effect of two-dimensional borophene nanoflakes on cells, systems and the entire animal organism has not been studied so far. Therefore, we investigated in vivo its biocompatibility with hemocytes in the Tenebrio molitor as a model organism. Short-term studies demonstrated that borophene nanoflakes at doses of 0.5, 1 or 2 µg of nanoflakes per insect did not induce hemocytotoxicity. Hemocytes exposed to nanoflakes showed morphology, adhesiveness and ability to form filopodia as in the control hemocytes. A detailed study indicates that borophene nanoflakes do not: (i) generate intracellular reactive oxygen species in hemocytes, (ii) affect the mitochondrial membrane potential and (iii) interfere with phagocytosis. Therefore, this contribution presents new in vivo insights into the group of two-dimensional materials which are one of the most promising materials for biomedical applications owing to their special structure and unique properties. However, long-term studies in insects and other animals are still necessary to confirm that borophene is biocompatible and biologically safe.

A Review of the Aquatic Environmental Transformations of Engineered Nanomaterials

Once released into the environment, engineered nanomaterials (ENMs) undergo complex interactions and transformations that determine their fate, exposure concentration, form, and likely impact on biota. Transformations are physical, chemical, or biological changes that occur to the ENM or the ENM coating. Over time, these transformations have an impact on their behaviour and properties. The interactions and transformations of ENMs in the environment depend on their pristine physical and chemical characteristics and the environmental or biological compartment into which they are released. The uniqueness of each ENM property or lifecycle results in a great deal of complexity. Even small changes may have a significant impact on their potential transformations. This review outlines the key influences and outcomes of ENM evolution pathways in aquatic environments and provides an assessment of potential environmental transformations, focusing on key chemical, physical, and biological processes. By obtaining a comprehensive understanding of the potential environmental transformations that nanomaterials can undergo, more realistic models of their probable environmental behaviour and potential impact can be developed. This will, in turn, be crucial in supporting regulatory bodies in their efforts to develop environmental policy in the field of nanotechnology.

Transformation of graphene oxide affects photodegradation of imidacloprid in the aquatic environment: Mechanism and implication

Graphene oxide (GO) is a representative novel carbonaceous nanomaterial, and neonicotinoid insecticides (NEOs) are currently the insecticides with the highest market share in the world. Their widespread application deservedly leads to their release to the environment. Thus, the complex interactions of these two types of organic compounds have attracted extensive attention. In this study, the effects of GO and its derivatives, reduced GO (RGO) and oxidized GO (OGO), on the photolysis of imidacloprid (IMD) (a typical NEO) under ultraviolet (UV) irradiation were systematically investigated. The results showed that the presence of the graphene-based nanomaterials (GNs) largely depressed the photodegradation of IMD, and the inhibition degree followed the order of RGO > GO > OGO. This was because the sp² π-conjugated structure in the GNs caused light-shielding effect and attenuated the direct photolysis of IMD, even though the GNs-generated reactive oxygen species (ROS) promoted the indirect photodegradation of IMD to a certain extent. Additionally, the rich O-functionalized GO and OGO altered the photolysis pathway of IMD and induced more toxic intermediate products. These results highlight the implication of carbonaceous nanomaterials on the behavior, fate and potential risk of NEOs in aqueous systems.

Fate and effects of graphene oxide alone and with sorbed benzo(a)pyrene in mussels Mytilus galloprovincialis

Graphene oxide (GO) has gained a great scientific and economic interest due to its unique properties. As incorporation of GO in consumer products is rising, it is expected that GO will end up in oceans. Due to its high surface to volume ratio, GO can adsorb persistent organic pollutants (POPs), such as benzo(a)pyrene (BaP), and act as carrier of POPs, increasing their bioavailability to marine organisms. Thus, uptake and effects of GO in marine biota represent a major concern. This work aimed to assess the potential hazards of GO, alone or with sorbed BaP (GO+BaP), and BaP alone in marine mussels after 7 days of exposure. GO was detected through Raman spectroscopy in the lumen of the digestive tract and in feces of mussels exposed to GO and GO+BaP while BaP was bioaccumulated in mussels exposed to GO+BaP, but especially in those exposed to BaP. Overall, GO acted as a carrier of BaP to mussels but GO appeared to protect mussels towards BaP accumulation. Some effects observed in mussels exposed to GO+BaP were due to BaP carried onto GO nanoplatelets. Enhanced toxicity of GO+BaP with respect to GO and/or BaP or to controls were identified for other biological responses, demonstrating the complexity of interactions between GO and BaP.

Environmental behaviors of emerging contaminants in freshwater ecosystem dominated by submerged plants: A review

Persistent exposure of emerging contaminants (ECs) in freshwater ecosystem has initiated intense global concerns. Freshwater ecosystem dominated by submerged plants (SP-FES) has been widely constructed to control eutrophic water. However, the environmental behaviors (e.g. migration, transformation, and degradation) of ECs in SP-FES have rarely been concerned and summarized. This review briefly introduced the sources of ECs, the pathways of ECs entering into SP-FES, and the constituent elements of SP-FES. And then the environmental behaviors of dissolved ECs and refractory solid ECs in SP-FES were comprehensively summarized, and the feasibility of removing ECs from SP-FES was critically evaluated. Finally, the challenges and perspectives on the future development for ECs removal from SP-FES were prospected, giving possible research gaps and key directions. This review will provide theoretical and technical support for the effective removal of ECs in freshwater ecosystem, especially in SP-FES.

Comparative ecotoxicity of graphene, functionalized multi-walled CNTs, and their mixture in freshwater microalgae, Scenedesmus obliquus: analyzing the role of oxidative stress

Due to their remarkable properties, the applications of carbon-based nanomaterials (CNMs) such as graphene and functionalized multi-walled carbon nanotubes (f-MWCNTs) are increasing. These CNMs can enter the freshwater environment via numerous routes, potentially exposing various organisms. The current study assesses the effects of graphene, f-MWCNTs, and their binary mixture on the freshwater algal species Scenedesmus obliquus. The concentration for the individual materials was kept at 1 mg L-1, while graphene and f-MWCNTs were taken at 0.5 mg L-1 each for the combination. Both the CNMs caused a decrease in cell viability, esterase activity, and photosynthetic efficiency in the cells. The cytotoxic effects were accompanied by increased hydroxyl and superoxide radical generation, lipid peroxidation, antioxidant enzyme activity (catalase and superoxide dismutase), and mitochondrial membrane potential. Graphene was more toxic compared to f-MWCNTs. The binary mixture of the pollutants demonstrated a synergistic enhancement of the toxic potential. Oxidative stress generation played a critical role in toxicity responses, as noted by a strong correlation between the physiological parameters and the biomarkers of oxidative stress. The outcomes from this study emphasize the significance of considering the combined effects of various CNMs as part of a thorough evaluation of ecotoxicity in freshwater organisms.

Air-enclosed pores in graphene aerogel inhibit the adsorption of bisphenol A but accelerate the adsorption of naphthalene

Graphene hydrogel (GH) and aerogel (GA) have great application potential as highly effective adsorbents, but the accessibility of their adsorption sites have not yet been identified, restricting our understanding on the adsorption mechanisms and manufacturing. This study comparatively studied the adsorption characteristics of bisphenol A (BPA) and naphthalene (NAP) on GH and GA, focussing on the accessibility of the adsorption sites. The adsorption of BPA on GA was much lower but faster than that on GH. NAP adsorption on GA was very close to that on GH but faster than that on the latter. Considering that NAP is volatilisable, we speculate that some unwetted sites in the air-enclosed pores are available to it, but not to BPA. We applied ultrasonic and vacuum treatments to remove the air in GA pores, which was verified using a CO₂ replacement experiment. BPA adsorption was greatly enhanced but slowed, while that of NAP was not enhanced. This phenomenon suggested that some inner pores became accessible in the aqueous phase after air removal from pores. The enhanced accessibility of air-enclosed pores was verified by the increased relaxation rate of surface-bounded water on GA, based on a ¹H NMR relaxation analysis. This study highlights that the accessibility of adsorption site plays a crucial role for the adsorption properties of carbon-based aerogel. The volatile chemicals may be quickly adsorbed in the air-enclosed pores, which be useful for immobilizing volatile contaminants.

Characterization of oxidative damage induced by nanoparticles via mechanism-driven machine learning approaches

The wide application of TiO₂-based engineered nanoparticles (nTiO₂) inevitably led to release into aquatic ecosystems. Importantly, increasing studies have emphasized the high risks of nTiO₂ to coastal environments. Bivalves, the representative benthic filter feeders in coastal zones, acted as important roles to assess and monitor the toxic effects of nanoparticles. Oxidative damage was one of the main toxic mechanisms of nTiO₂ on bivalves, but the experimental variables/nanomaterial characteristics were diverse and the toxicity mechanism was complex. Therefore, it was very necessary to develop machine learning model to characterize and predict the potential toxicity. In this study, thirty-six machine learning models were built by nanodescriptors combined with six machine learning algorithms. Among them, random forest (RF) - catalase (CAT), k-neighbors classifier (KNN) - glutathione peroxidase (GPx), neural networks - multilayer perceptron (ANN) - glutathione s-transferase (GST), random forest (RF) - malondialdehyde (MDA), random forest (RF) - reactive oxygen species (ROS), and extreme gradient boosting decision tree (XGB) - superoxide dismutase (SOD) models performed good with high accuracy and balanced accuracy for both training sets and external validation sets. Furthermore, the best model revealed the predominant factors (exposure concentration, exposure periods, and exposure matrix) influencing the oxidative stress induced by nTiO₂. These results showed that high exposure concentrations and short exposure-intervals tended to cause oxidative damage to bivalves. In addition, gills and digestive glands could be vulnerable to nTiO₂-induced oxidative damage as tissues/organs differences were the important factors controlling MDA activity. This study provided insights into important nano-features responsible for the different indicators of oxidative stress and thereby extended the application of machine learning approaches in toxicological assessment for nanoparticles.

The impact of various carbon nanomaterials on the morphological, behavioural, and biochemical parameters of rainbow trout in the early life stages

With the increasing production and the number of potential applications of carbon nanomaterials, mainly from the graphene family, their release into the natural environment, especially to aquatic ecosystems, is inevitable. The aim of the study was to determine the effects of various carbon nanomaterials (graphene nanoflakes (GNF), graphene oxide (GO), reduced graphene oxide (RGO) and silicon carbide nanofibers (NFSiC) in the concentration of 4 mg L^-1 on the early life stages of the rainbow trout Oncorhynchus mykiss. The survival rates of O. mykiss were not affected after 36 days of exposure to studied materials, except for RGO, which caused significant mortality of both embryos and larvae compared to the control conditions. Larvae exposed to GO and NFSiC were characterized by a smaller standard body length at hatch, whereas at the end of the experiment, the growth of fish exposed to all materials was accelerated, especially in GO and RGO treatment, in which higher body weight and length were accompanied by lower volume of the yolk sac. Neither the markers of the oxidative damage nor the antioxidant enzymes activities were significantly affected in embryos, newly hatched larvae and larvae after 26-day exposure to studied carbon nanomaterials. Also, no neurotoxic effect expressed by the activity of the whole-body acetylcholinesterase was observed. Nevertheless, the significant increase in the velocity and the overall activity of larvae exposed to GNF (not investigated after exposure to other materials) must be highlighted. The most pronounced effect of RGO might be connected with its large particle size, sharp edges, and the presence of TiO₂ nanoparticles. The results indicate for the first time that various carbon nanomaterials potentially released into aquatic ecosystems may have serious developmental implications for the early life stages of salmonid fish.