Extracellular polymeric substances govern the surface charge of biogenic elemental selenium nanoparticles

Aerobic Se(IV) reducing bacteria and their reducing characteristics in estuarine sediment

Microorganisms play a critical role in the biogeochemical cycling of selenium in natural ecosystems, particularly in reducing selenite (Se(IV)) to element selenium (Se(0)) which reduces its mobility and bioavailability. However, Se(IV)-reducing bacteria and their reducing characteristics in estuarine sediments remain inadequately understood. In this study, the reduction of Se(IV) was confirmed to be microbially driven through the cultivation of a mixture of estuarine sediment and Se(IV) under aerobic conditions. Community analysis indicates that Bacillus was primarily involved in the reduction of Se(IV). A strain with high salt tolerance (7.5 % NaCl) and Se(IV) resistance (up to 200 mM), Bacillus cereus SD1, was isolated from an estuarine sediment. The reduction of Se(IV) occurred concomitantly with the onset of microbial growth, and reduction capacity increased approximately 5-fold by adjusting the pH. In addition, Se(IV) reduction in Bacillus cereus SD1 was significantly inhibited by sulfite, and the key enzyme activity tests revealed the possible presence of a sulfite reductase-mediated Se(IV) reduction pathway. These research findings provide new insights into the bioreducing characteristics and the biogeochemical cycling of selenium in estuarine environments.

Biochemical characterization, biosynthesis mechanism, and functional evaluation of selenium-enriched Aspergillus oryzae A02

The synthesis mechanisms and function evaluation of selenium(Se)-enriched microorganism remain relatively unexplored. This study unveils that total Se content within A. oryzae A02 mycelium soared to an impressive 8462 mg/kg DCW, surpassing Se-enriched yeast by 2-3 times. Selenium exists in two predominant forms within A. oryzae A02: selenoproteins (SeMet 32.1 %, SeCys 14.4 %) and selenium nanoparticles (SeNPs; 53.5 %). The extensive quantitative characterization of the elemental composition, surface morphology, and size of SeNPs on A. oryzae A02 mycelium significantly differs from those reported for other microorganisms. Comparative RNA-Seq analysis revealed the upregulation of functional genes implicated in selenium transformation, activating multiple potential pathways for selenium reduction. The assimilatory and dissimilatory reductions of Se oxyanions engaged numerous parallel and interconnected pathways, manifesting a harmonious equilibrium in overall Se biotransformation in A. oryzae A02. Furthermore, selenium-enriched A. oryzae A02 was observed to primarily upregulate peroxisome activity while downregulating estrogen 2-hydroxylase activity in mice hepatocytes, suggesting its potential in fortifying antioxidant physiological functions and upholding metabolic balance.

Identification and Functional Characterization of a Surfactant-like Protein Region in Flagellin FliC for Stabilizing Selenium Nanoparticles and Enhancing Bioavailability

Biogenic selenium nanoparticles (SeNPs) are the most favorable Se form for nutritional supplementation due to their high stability, low toxicity, and high activity. However, the interaction between the surface-binding proteins and their stable biogenic SeNPs, as well as their impact on the stability and bioavailability of SeNPs, remains to be understood. In vitro stabilization experiments revealed an amino acid segment (F(235-386)) in Rahnella aquatilis' flagellin FliC, with surfactant-like properties, stabilizing SeNPs under harsh conditions. FliC and F(235-386) were employed as stabilizers to synthesize SeNPs (FliC@SeNPs and F(235-386)@SeNPs), and surface chemistry analysis revealed coordination reactions between the proteins and Se atoms on the surface of SeNPs. Both FliC and F(235-386) enhanced SeNPs uptake in wheat seedlings but reduced it in bacteria and yeast. This study highlights FliC's core function in stabilizing SeNPs and enhancing their bioavailability, paving the way for agricultural and nutritional applications.

Harnessing active biofilm for microbial corrosion protection of carbon steel against Geobacter sulfurreducens

Microbiologically influenced corrosion (MIC) caused by corrosive microorganisms poses significant economic losses and safety hazards. Conventional corrosion prevention methods have limitations, so it is necessary to develop the eco-friendly and long-term effective strategies to mitigate MIC. This study investigated the inhibition of Vibrio sp. EF187016 biofilm on Geobacter sulfurreducens on carbon steel. Vibrio sp. EF187016 biofilm reduced the corrosion current density and impeded pitting corrosion. A thick and uniform Vibrio sp. EF187016 biofilm formed on the coupon surfaces, acting as a protective layer against corrosive ions and electron acquisition by G. sulfurreducens. The pre-grown mature Vibrio sp. EF187016 biofilms, provided enhanced protection against G. sulfurreducens corrosion. Additionally, the extracellular polymeric substances from Vibrio sp. EF187016 was confirmed to act as a green corrosion inhibitor to mitigate microbial corrosion. This study highlights the potential of active biofilms for eco-friendly corrosion protection, offering a novel perspective on material preservation against microbial corrosion.

Multi-pathways-mediated mechanisms of selenite reduction and elemental selenium nanoparticles biogenesis in the yeast-like fungus Aureobasidium melanogenum I15

Selenium (Se) plays a critical role in diverse biological processes and is widely used across manufacturing industries. However, the contamination of Se oxyanions also poses a major public health concern. Microbial transformation is a promising approach to detoxify Se oxyanions and produce elemental selenium nanoparticles (SeNPs) with versatile industrial potential. Yeast-like fungi are an important group of environmental microorganisms, but their mechanisms for Se oxyanions reduction remain unknown. In this study, we found that Aureobasidium melanogenum I15 can reduce 1.0 mM selenite by over 90% within 48 h and efficiently form intracellular or extracellular spherical SeNPs. Metabolomic and proteomic analyses disclosed that A. melanogenum I15 evolves a complicated selenite reduction mechanism involving multiple metabolic pathways, including the glutathione/glutathione reductase pathway, the thioredoxin/thioredoxin reductase pathway, the siderophore-mediated pathway, and multiple oxidoreductase-mediated pathways. This study provides the first report on the mechanism of selenite reduction and SeNPs biogenesis in yeast-like fungi and paves an alternative avenue for the bioremediation of selenite contamination and the production of functional organic selenium compounds.

Mechanisms of bacterial resistance to environmental silver and antimicrobial strategies for silver: A review

The good antimicrobial properties of silver make it widely used in food, medicine, and environmental applications. However, the release and accumulation of silver-based antimicrobial agents in the environment is increasing with the extensive use of silver-based antimicrobials, and the prevalence of silver-resistant bacteria is increasing. To prevent the emergence of superbugs, it is necessary to exercise rational and strict control over drug use. The mechanism of bacterial resistance to silver has not been fully elucidated, and this article provides a review of the progress of research on the mechanism of bacterial resistance to silver. The results indicate that bacterial resistance to silver can occur through inducing silver particles aggregation and Ag+ reduction, inhibiting silver contact with and entry into cells, efflux of silver particles and Ag+ in cells, and activation of damage repair mechanisms. We propose that the bacterial mechanism of silver resistance involves a combination of interrelated systems. Finally, we discuss how this information can be used to develop the next generation of silver-based antimicrobials and antimicrobial therapies. And some antimicrobial strategies are proposed such as the "Trojan Horse" - camouflage, using efflux pump inhibitors to reduce silver efflux, working with "minesweeper", immobilization of silver particles.

Nitrate reductase involves in selenite reduction in Rahnella aquatilis HX2 and the characterization and anticancer activity of the biogenic selenium nanoparticles

BACKGROUND

Biogenic selenium nanoparticles (SeNPs) show numerous advantages including their high stability, low toxicity, and high bioactivity. While metabolism of SeNPs remains not well studied and need more investigation to reveal the process.

PURPOSE

The objective of the study was to investigate the relationship between nitrate reductase and selenite reduction in Rahnella aquatilis HX2, characterize the properties of HX2 produced SeNPs, and explore their potential applications, particularly their anticancer activity.

PROCEDURES

Selenium species were measured by high-performance liquid chromatography coupled to inductively coupled plasma - Mass spectrometry (HPLC-ICP-MS). Transcription level of nitrate reductase was determined by Real-time quantitative PCR. Morphology, particle size, crystal structure and surface chemistry of SeNPs were determined by electron microscopy, dynamic light scattering method, Raman scattering, X-ray photoelectron spectroscopy, respectively. Anti cancer cell activity was measured by CCK-8 assay.

MAIN FINDINGS

SeNP production in R. aquatilis HX2 was correlated with the cell growth. The products of selenite reduction in HX2 detected by HPLC-ICP-MS included SeNPs, selenocysteine (SeCys), Se-Methylselenocysteine (MeSeCys), and 7 unknown compounds. Nitrate addition experiments suggested the involvement of nitrate reductase in selenite reduction in HX2. Both the cellular membrane and cytoplasm of HX2 exhibited selenite-reducing ability, indicating that membrane-associated nitrate reductase was not the sole selenite reductase in HX2. Characterization of the biogenic SeNPs revealed a spherical morphology and amorphous structure of them. Surface chemistry analysis implicated the binding of extracellular polymeric substances to the biogenic SeNPs, and the presence of Se0, Se2-, and electron-rich Se atoms on the surface of SeNPs. Finally, the IC50 values of the biogenic SeNPs were 36.49 μM for HepG2 and 3.70 μM for HeLa cells.

CONCLUSIONS

The study first revealed that the nitrate reductase is involving in selenite reduction in R. aquatilis HX2. The biogenic SeNPs coordinated with organic substances in the surface. And SeNPs produced by R. aquatilis HX2 showed excellent anticancer activities on HepG2 and HeLa cells.

Stabilization by Chaperone GroEL in Biogenic Selenium Nanoparticles Produced from Bifidobacterium animalis H15 for the Treatment of DSS-Induced Colitis

Inflammatory bowel diseases have a high rate of mortality and pose a serious threat to global public health. Selenium is an essential trace element, which has been shown to play important roles in redox control and antioxidant defense. Microorganisms play important roles in the reduction of toxic inorganic selenium (selenite and selenate) to less-toxic biogenic selenium nanoparticles (Bio-SeNPs), which have higher biocompatibility. In the present study, novel Bio-SeNPs with high stability were synthesized using probiotic Bifidobacterium animalis subsp. lactis H15, which was isolated from breastfed infant feces. The Bio-SeNPs with a size of 122 nm showed stability at various ionic strengths, temperatures, and in simulated gastrointestinal fluid, while chemosynthetic SeNPs underwent aggregation. The main surface protein in the Bio-SeNPs was identified as chaperone GroEL by liquid chromatography-tandem mass spectrometry. The overexpression and purification of GroEL demonstrated that GroEL controlled the assembly of Bio-SeNPs both in vitro and in vivo. In vivo, oral administration of Bio-SeNPs could alleviate dextran sulfate sodium-induced colitis by decreasing cell apoptosis, increasing antioxidant capacity and the number of proliferating cells, and improving the function of the intestinal mucosal barrier. In vitro experiments verified that Bio-SeNPs inhibited lipopolysaccharide-induced toll-like receptor 4/NF-κB signaling pathway activation. These results suggest that the Bio-SeNPs with high stability could have potential as a nutritional supplement for the treatment of colitis in nanomedicine applications.

Amorphous structure and crystal stability determine the bioavailability of selenium nanoparticles

Microorganisms play a critical role in the biogeochemical cycling of selenium, often reducing selenite/selenate to elemental selenium nanoparticles (SeNPs). These SeNPs typically exist in an amorphous structure but can transform into a trigonal allotrope. However, the crystal structural transition process and its impact on selenium bioavailability have not been well studied. To shed light on this, we prepared chemosynthetic and biogenic SeNPs and investigated the stability of their crystal structure. We found that biogenic SeNPs exhibited a highly stable amorphous structure in various conditions, such as lyophilization, washing, and laser irradiation, whereas chemosynthetic SeNPs transformed into a trigonal structure in the same conditions. Additionally, a core-shell structure was observed in biogenic SeNPs after electron beam irradiation. Further analysis revealed that biogenic SeNPs showed a coordination reaction between Se atoms and surface binding biomacromolecules, indicating that the outer layer of Se-biomacromolecules complex prevented the SeNPs from crystallizing. We also investigated the effects of SeNPs crystal structures on the bioavailability in bacteria, yeast, and plants, finding that the amorphous structure of SeNPs determined Se bioavailability.

Biological upcycling of nickel and sulfate as electrocatalyst from electroplating wastewater

Upcycling nickel (Ni) to useful catalyst is an appealing route to realize low-carbon treatment of electroplating wastewater and simultaneously recovering Ni resource, but has been restricted by the needs for costly membranes or consumption of large amount of chemicals in the existing upcycling processes. Herein, a biological upcycling route for synchronous recovery of Ni and sulfate as electrocatalysts, with certain amount of ferric salt (Fe3+) added to tune the product composition, is proposed. Efficient biosynthesis of bio-NiFeS nanoparticles from electroplating wastewater was achieved by harnessing the sulfate reduction and metal detoxification ability of Desulfovibrio vulgaris. The optimal bio-NiFeS, after further annealing at 300 °C, served as an efficient oxygen evolution electrocatalyst, achieving a current density of 10 mA·cm-1 at an overpotential of 247 mV and a Tafel slope of 60.2 mV·dec-1. It exhibited comparable electrocatalytic activity with the chemically-synthesized counterparts and outperformed the commercial RuO2. The feasibility of the biological upcycling approach for treating real Ni-containing electroplating wastewater was also demonstrated, achieving 99.5 % Ni2+removal and 41.0 % SO42- removal and enabling low-cost fabrication of electrocatalyst. Our work paves a new path for sustainable treatment of Ni-containing wastewater and may inspire technology innovations in recycling/ removal of various metal ions.

Advances in the Study of Selenium-Enriched Probiotics: From the Inorganic Se into Se Nanoparticles

Selenium (Se) is a momentous metallic element that plays an irreplaceable role in biochemical activities. Se deficiency remains a nutritional challenge across the world. Organic Se supplementation is the most effective treatment means for Se deficiency. Organic Se transformed from Se-enriched probiotics show outstanding excellent properties in antibacteria, anti-oxidation, anti-inflammation, and immunoregulation. Studying the influencing factors for Se enrichment capacity and enrichment mechanisms of Se-enriched probiotics is conducive to the exploit of more potent Se-enriched probiotics. Se-enriched probiotics transform inorganic Se into Se nanoparticles (SeNPs), which have been widely used in animal husbandry and biomedical field. In this paper, the novel development of Se-enriched probiotics is reviewed, and the bioactivities of SeNPs are assessed, so as to display their potential application prospects. The excellent role of SeNPs in anti-oxidation is summarized, and the mechanism by which SeNPs improve Se deficiency and boost animal health is explained.

Selenite bioreduction with concomitant green synthesis of selenium nanoparticles by a selenite resistant EPS and siderophore producing terrestrial bacterium

Environmental bacterial isolates play a very important role in bioremediation of metals and toxic metalloids. A bacterial strain with high selenite (SeO32-) tolerance and reducing capability was isolated from electronic waste dump site in Banaras Hindu University, Varanasi, India. Based on 16 S rRNA sequencing and BLAST search, this bacterial isolate was identified as Bacillus paramycoides and designated as strain MF-14. It tolerated Sodium selenite up to 110 mM when grown aerobically in LB broth and reduced selenite into elemental selenium (Se0) significantly within 24 h with concomitant biosynthesis of selenium nanoparticles as clearly revealed by brick red precipitate and specific surface plasmon resonance peak at 210 nm using UV-Visible spectrophotometer. Scanning electron microscopy (SEM) analysis of this bacterial strain exposed to 1mM and 5 mM selenite also demonstrated morphological alterations as cell enlargement due to accumulation and bioprecipitation of elemental selenium (Se0). The FTIR analysis clearly demonstrated that functional groups present on the surface of biogenic selenium nanoparticles (SeNPs) play a significant role in the stabilization and capping of SeNPs. Furthermore, these SeNPs were characterized using spectroscopic analysis involving Dynamic light scattering, zeta potential, XPS, FTIR, XRD and Raman spectroscopy which clearly revealed particle size 10-700 nm, amorphous nature, stability as well as it's oxidation state. The biochemical studies have demonstrated that membrane bound reductase enzyme may be responsible for significant reduction of selenite into elemental selenium. Therefore, we may employ Bacillus paramycoides strain MF-14 successfully for bioremediation of selenite contaminated environmental sites with concomitant green synthesis of SeNPs.

Comparison of Nutritional Availability of Biogenic Selenium Nanoparticles and Chemically Synthesized Selenium Nanoparticles

Selenium (Se) is an essential micronutrient, and animals biosynthesize selenoproteins from various selenocompounds such as inorganic salts and organic selenocompounds as a Se source. In addition to the inorganic and organic forms of Se, it is also known that elemental Se is biologically synthesized at the nanoscale in nature. Biologically synthesized Se nanoparticles (Se-NPs), i.e., biogenic Se-NPs (Se-BgNPs), have not been fully investigated as a Se source compared with the other forms of Se. In this study, we evaluated the nutritional availability of Se-BgNPs biosynthesized in E. coli and revealed that Se-BgNPs were less assimilated into selenoproteins in rats as a Se source than inorganic Se salt or chemically synthesized Se-NPs. Se-BgNPs showed tolerance toward digestion and low absorbability in gut, which resulted in the low nutritional availability. Se-BgNPs seem to be coated with a biomaterial that functions to reduce their toxicity toward E. coli and at the same time lowers their availability to animals.

Aggregation and stability of selenium nanoparticles: Complex roles of surface coating, electrolytes and natural organic matter

The application of selenium nanoparticles (SeNPs) as nanofertilizers may lead to the release of SeNPs into aquatic systems. However, the environmental behavior of SeNPs is rarely studied. In this study, using alginate-coated SeNPs (Alg-SeNPs) and polyvinyl alcohol-coated SeNPs (PVA-SeNPs) as models, we systematically investigated the aggregation and stability of SeNPs under various water conditions. PVA-SeNPs were highly stable in mono- and polyvalent electrolytes, probably due to the strong steric hindrance of the capping agent. Alg-SeNPs only suffered from a limited increase in size, even at 2500 mmol/L NaCl and 200 mmol/L MgCl₂, while they underwent apparent aggregation in CaCl₂ and LaCl₃ solutions. The binding of Ca²⁺ and La³⁺ with the guluronic acid part in alginate induced the formation of cross-linking aggregates. Natural organic matter enhanced the stability of Alg-SeNPs in monovalent electrolytes, while accelerated the attachment of Alg-SeNPs in polyvalent electrolytes, due to the cation bridge effects. The long-term stability of SeNPs in natural water showed that the aggregation sizes of Alg-SeNPs and PVA-SeNPs increased to several hundreds of nanometers or above 10 µm after 30 days, implying that SeNPs may be suspended in the water column or further settle down, depending on the surrounding water chemistry. The study may contribute to the deep insight into the fate and mobility of SeNPs in the aquatic environment. The varying fate of SeNPs in different natural waters also suggests that the risks of SeNPs to organisms living in diverse depths in the aquatic compartment should be concerned.

Nanoscale heterogeneity of arsenic and selenium species in coal fly ash particles: analysis using enhanced spectroscopic imaging and speciation techniques

Coal combustion byproducts are known to be enriched in arsenic (As) and selenium (Se). This enrichment is a concern during the handling, disposal, and reuse of the ash as both elements can be harmful to wildlife and humans if mobilized into water and soils. The leaching potential and bioaccessibility of As and Se in coal fly ash depends on the chemical forms of these elements and their association with the large variety of particles that comprise coal fly ash. The overall goal of this research was to determine nanoscale and microscale solid phase mineral associations and oxidation states of As and Se in fly ash. We utilized nanoscale 2D imaging (30-50 nm spot size) with the Hard X-ray Nanoprobe (HXN) in combination with microprobe X-ray capabilities (∼5 μm resolution) to determine the As and Se elemental associations. Speciation of As and Se was also measured at the nano- to microscale with X-ray absorption spectroscopy. The enhanced resolution of HXN showed As and Se as either diffusely located around or comingled with Ca- and Fe-rich particles. The results also showed nanoparticles of Se attached to the surface of fly ash grains. Overall, a comparison of As and Se species across scales highlights the heterogeneity and complexity of chemical associations for these trace elements of concern in coal fly ash.

Coupling of selenate reduction and pyrrhotite oxidation by indigenous microbial consortium in natural aquifer

Pyrrhotite is ubiquitously found in natural environment and involved in diverse (bio)processes. However, the pyrrhotite-driven bioreduction of toxic selenate [Se(VI)] remains largely unknown. This study demonstrates that Se(VI) is successfully bioreduced under anaerobic condition with the participation of pyrrhotite for the first time. Completely removal of Se(VI) was achieved at initial concentration of 10 mg/L Se(VI) and 0.56 mL/min flow rate in continuous column experiment with indigenous microbial consortium and pyrrhotite. Variation in hydrochemistry and hydrodynamics affected Se(VI) removal performance. Se(VI) was reduced to insoluble Se(0) while elements in pyrrhotite were oxidized to Fe(III) and SO₄^2-. Breakthrough study indicated that biotic activity contributed 81.4 ± 1.07% to Se(VI) transformation. Microbial community analysis suggested that chemoautotrophic genera (e.g., Thiobacillus) could realize pyrrhotite oxidation and Se(VI) reduction independently, while heterotrophic genera (e.g., Bacillus, Pseudomonas) contributed to Se(VI) detoxification by utilizing metabolic intermediates generated through Fe(II) and S(-II) oxidation, which were further verified by pure culture tests. Metagenomic and qPCR analyses indicated genes encoding enzymes for Se(VI) reduction (e.g., serA, napA and srdBAC), S oxidation (e.g., soxB) and Fe oxidation (e.g., mtrA) were upregulated. The elevated electron transporters (e.g., nicotinamide adenine dinucleotide, cytochrome c) promoted electron transfer from pyrrhotite to Se(VI). This study gains insights into Se biogeochemistry under the effect of Fe(II)-bearing minerals and provides a sustainable strategy for Se(VI) bioremediation in natural aquifer.

Selenite Bioremediation by Food-Grade Probiotic Lactobacillus casei ATCC 393: Insights from Proteomics Analysis

Microorganisms capable of converting toxic selenite into elemental selenium (Se0) are considered an important and effective approach for bioremediation of Se contamination. In this study, we investigated the mechanism of reducing selenite to Se0 and forming Se nanoparticles (SeNPs) by food-grade probiotic Lactobacillus casei ATCC 393 (L. casei ATCC 393) through proteomics analysis. The results showed that selenite added during the exponential growth period of bacteria has the highest reduction efficiency, and 4.0 mM selenite decreased by nearly 95% within 72 h and formed protein-capped-SeNPs. Proteomics analysis revealed that selenite induced a significant increase in the expression of glutaredoxin, oxidoreductase, and ATP binding cassette (ABC) transporter, which can transport glutathione (GSH) and selenite. Selenite treatment significantly increased the CydC and CydD (putative cysteine and glutathione importer, ABC transporter) mRNA expression level, GSH content, and GSH reductase activity. Furthermore, supplementation with an additional GSH significantly increased the reduction rate of selenite, while GSH depletion significantly inhibited the reduction of selenite, indicating that GSH-mediated Painter-type reaction may be the main pathway of selenite reduction in L. casei ATCC 393. Moreover, nitrate reductase also participates in the reduction process of selenite, but it is not the primary factor. Overall, L. casei ATCC 393 effectively reduced selenite to SeNPs by GSH and nitrate reductase-mediated reduction pathway, and the GSH pathway played the decisive role, which provides an environmentally friendly biocatalyst for the bioremediation of Se contamination. IMPORTANCE Due to the high solubility and bioavailability of selenite, and its widespread use in industrial and agricultural production, it is easy to cause selenite to accumulate in the environment and reach toxic levels. Although the bacteria screened from special environments have high selenite tolerance, their safety has not been fully verified. It is necessary to screen out strains with selenite-reducing ability from nonpathogenic, functionally known, and widely used strains. Herein, we found food-grade probiotic L. casei ATCC 393 effectively reduced selenite to SeNPs by GSH and nitrate reductase-mediated reduction pathway, which provides an environmentally friendly biocatalyst for the bioremediation of Se contamination.

Long-term exposure of polytetrafluoroethylene-nanoplastics on the nitrogen removal and extracellular polymeric substances in sequencing batch reactor

The impact of polytetrafluoroethylene-nanoplastics (PTFE-NPs) on biological sewage disposal was delved, containing nitrogen remotion, microbiological activity and composition of extracellular polymer (EPS). The addition of PTFE-NPs reduced the removal efficiencies of chemical oxygen demand (COD) and ammonia nitrogen (NH₄⁺-N) by 3.43 % and 2.35 %, respectively. In comparison with no PTFE-NPs, the specific oxygen uptake rate (SOUR), specific ammonia oxidation rate (SAOR), specific nitrite oxidation rate (SNOR) and specific nitrate reduction rate (SNRR) decreased by 65.26 %, 65.24 %, 41.77 % and 54.56 %, respectively. The PTFE-NPs inhibited the activities of nitrobacteria and denitrobacteria. It was worth noting that, nitrite oxidized bacterium was more resistant to adverse environments than ammonia oxidizing bacterium. Compared with no PTFE-NPs, the reactive oxygen species (ROS) content and lactate dehydrogenase (LDH) grew by 130 % and 50 % under PTFE-NPs pressure. The appearance of PTFE-NPs affected the normal function of microorganisms by inducing endocellular oxidative stress and destroying the completeness of the cytomembrane. The protein (PN) and polysaccharide (PS) levels in loosely bound EPS (LB-EPS) and tightly bound EPS (TB -EPS) increased by 4.96, 0.70, 3.07 and 0.71 mg g^-1 VSS, under PTFE-NPs. Meanwhile, the PN/PS ratios of LB-EPS and TB -EPS increased from 6.18 and 6.41-11.04 and 9.29, respectively. The LB-EPS might provide sufficient binding sites for PTFE-NPs adsorption due to its loose and porous structure. The defense mechanism of bacteria against PTFE-NPs was mainly the PN in loosely bound EPS. Moreover, the functional groups referred to the complexation of EPS with PTFE-NPs were mainly related to N-H, CO, and C-N in proteins and O-H in polysaccharides.

Heavy-metal resistant bio-hybrid with biogenic ferrous sulfide nanoparticles: pH-regulated self-assembly and wastewater treatment application

Self-assembled bio-hybrids with biogenic ferrous sulfide nanoparticles (bio-FeS) on the cell surface are attractive for reduction of toxic heavy metals due to higher activity than bare bacteria, but they still suffer from slow synthesis and regeneration of bio-FeS and bacterial activity decay for removal of high-concentration heavy metals. A further optimization of the bio-FeS synthesis process and properties is of vital importance to address this challenge. Herein, we present a simple pH-regulation strategy to enhance bio-FeS synthesis and elucidated the underlying regulatory mechanisms. Slightly raising the pH from 7.4 to 8.3 led to 1.5-fold higher sulfide generation rate due to upregulated expression of thiosulfate reduction-related genes, and triggered the formation of fine-sized bio-FeS (29.4 ± 6.1 nm). The resulting bio-hybrid exhibited significantly improved extracellular reduction activity and was successfully used for treatment of high-concentration chromium -containing wastewater (Cr(VI), 80 mg/L) at satisfactory efficiency and stability. Its feasibility for bio-augmented treatment of real Cr(VI)-rich electroplating wastewater was also demonstrated, showing no obvious activity decline during 7-day operation. Overall, our work provides new insights into the environmental-responses of bio-hybrid self-assembly process, and may have important implications for optimized application of bio-hybrid for wastewater treatment and environmental remediation.

Bioconversion of inorganic selenium to less toxic selenium forms by microbes: A review

In recent years, microbial conversion of inorganic selenium into an efficient and low-toxic form of selenium has attracted much attention. With the improvement of scientific awareness and the continuous progress of nanotechnology, selenium nanoparticles can not only play the unique functions of organic selenium and inorganic selenium but also have higher safety, absorption and biological activity than other selenium forms. Therefore, the focus of attention has gradually shifted beyond the level of selenium enrichment in yeast to the combination of biosynthetic selenium nanoparticles (BioSeNPs). This paper primarily reviews inorganic selenium and its conversion to less toxic organic selenium and BioSeNPs by microbes. The synthesis method and potential mechanism of organic selenium and BioSeNPs are also introduced, which provide a basis for the production of specific forms of selenium. The methods to characterize selenium in different forms are discussed to understand the morphology, size and other characteristics of selenium. In general, to obtain safer and higher selenium content products, it is necessary to develop yeast resources with higher selenium conversion and accumulation.

Biogenic selenium nanoparticles with antifungal activity against the wood-rotting fungus Oligoporus pelliculosus

Selenium nanoparticles (SeNPs) have antimicrobial and antifungal activity. SeNPs using Se resistant bacteria is a low cost and eco-friendly technology. Fungal contamination of wood during drying is one of the main causes of economic losses in the wood industry. The bacterium Delftia sp. 5 resistance to Se and its ability to produce SeNPs able to inhibit the growth of the wood brown-rotting fungus Oligoporus pelliculosus was analyzed. The strain showed an optimal SeNPs production when selenite concentration was 160 mg L ^-1. The SeNPs were spherical with an average size 192.33 ± 8.6 nm and a zeta potential of -41.4 ± 1.3 nm. The SeNPs produced by Delftia sp. 5 (33.6 ± 0.1 mg L ^-1 Se) inhibited the growth of O. pelliculosus in agar plates and in Nothofagus pumilio (Lenga) wood samples. Delftia sp. 5 SeNPs could be used for embedding lenga wood prior to drying for preventing the growth of the deteriorating fungi O. pelliculosus.

Allotropy of selenium nanoparticles: Colourful transition, synthesis, and biotechnological applications

Elemental selenium (Se⁰ ) nanomaterials undergo allotropic transition from thermodynamically-unstable to more stable phases. This process is significantly different when Se⁰ nanoparticles (NPs) are produced via physico-chemical and biological pathways. While the allotropic transition of physico-chemically synthesized Se⁰ is fast (minutes to hours), the biogenic Se⁰ takes months to complete. The biopolymer layer covering biogenic Se⁰ NPs might be the main factor controlling this retardation, but this still remains an open question. Phylogenetically-diverse bacteria reduce selenium oxyanions to red amorphous Se⁰ allotrope, which has low market value. Then, red Se⁰ undergoes allotropic transition to trigonal (metallic grey) allotrope, the end product having important industrial applications (e.g. semiconductors, alloys). Is it not yet clear whether biogenic Se⁰ presents any biological function, or it is mainly a detoxification and respiratory by-product. The better understanding of this transition would benefit the recovery of Se⁰ NPs from secondary resources and its targeted utilization with respect to each allotropic stage. This review article presents and critically discusses the main physico-chemical methods and biosynthetic pathways of Se⁰ (bio)mineralization. In addition, the article proposes a conceptual model for the resource recovery potential of trigonal selenium nanomaterials in the context of circular economy.

Preparation, characteristics and cytotoxicity of green synthesized selenium nanoparticles using Paenibacillus motobuensis LY5201 isolated from the local specialty food of longevity area

Selenium is an essential micronutrient element. For the extremely biotoxic of selenite, Selenium nanoparticles (SeNPs) is gaining increasing interest. In this work, a selenium-enriched strain with highly selenite-resistant (up to 173 mmol/L) was isolated from the local specialty food of longevity area and identified as Paenibacillus motobuensis (P. motobuensis) LY5201. Most of the SeNPs were accumulated extracellular. SeNPs were around spherical with a diameter of approximately 100 nm. The X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy showed that the purified SeNPs consisted of selenium and proteins. Our results suggested that P. motobuensis LY5201could be a suitable and robust biocatalyst for SeNPs synthesis. In addition, the cytotoxicity effect and the anti-invasive activity of SeNPs on the HepG2 showed an inhibitory effect on HepG2, indicating that SeNPs could be used as a potential anticancer drug.

Highly Efficient Biotransformation and Production of Selenium Nanoparticles and Polysaccharides Using Potential Probiotic Bacillus subtilis T5

Selenium is an essential microelement required for human health. The biotransformation of selenium nanoparticles has attracted increasing attention in recent years. However, little of the literature has investigated the comprehensive evaluation of the strains for practical application and the effect on the functional properties in the existence of Se. The present study showed the selenite reduction strain Bacillus subtilis T5 (up to 200 mM), which could produce high yields of selenium polysaccharides and selenium nanoparticles in an economical and feasible manner. Biosynthesized selenium nanoparticles by B. subtilis T5 were characterized systematically using UV-vis spectroscopy, FTIR, Zeta Potential, DLS, and SEM techniques. The biosynthesized SeNPs exhibited high stability with small particle sizes. B. subtilis T5 also possessed a tolerance to acidic pH and bile salts, high aggregation, negative hemolytic, and superior antioxidant activity, which showed excellent probiotic potential and can be recommended as a potential candidate for the selenium biopharmaceuticals industry. Remarkably, B. subtilis T5 showed that the activity of α-amylase was enhanced with selenite treatment to 8.12 U/mL, 2.72-fold more than the control. The genus Bacillus was first reported to produce both selenium polysaccharides with extremely high Se-content (2.302 g/kg) and significantly enhance the activity to promote α-amylase with selenium treatment. Overall, B. subtilis T5 showed potential as a bio-factory for the biosynthesized SeNPs and organ selenium (selenium polysaccharide), providing an appealing perspective for the biopharmaceutical industry.

Therapeutic potential of selenium nanoparticles

Diseases have always been a disconcerting issue and have changed into being an inevitable member of the world’s population. Medical advancements have brought in improved treatments for particular ailments, but unfortunately those betterments have resulted in either side effects or turned out futile to a certain extent. The emergence of nanotechnology has considerably benefitted medical experts in disease diagnosis and therapeutics. Currently, an expansive range of nanoparticles is being explored for their effectiveness in therapies, and one among them is selenium nanoparticles (SeNPs). Nano-selenium exhibits significant properties which make it best suited for this purpose. The article highlights the key role of SeNPs in treating major diseases like cancer, diabetes, and microbial infections.

Biological selenate and selenite reduction by waste activated sludge using hydrogen as electron donor

Biological reduction of selenium oxyanions is widely used for selenium removal from wastewater. The process is, however, limited by the availability of a suitable, efficient and low cost electron donor. In this study, selenite and selenate reduction by waste activated sludge using hydrogen as the electron donor was investigated. Both selenite and selenate (80 mg/L) were completely removed using H₂ within 8 days of incubation. In the presence of sulfate in the medium, the Se removal efficiency decreased to 77.8-95.4% (for selenite) and 88.2-99.4% (for selenate) at different temperatures and initial sulfate concentrations. Thermophilic conditions (50 °C) were better suited for both selenite and selenate reduction using H₂ as electron donor with a 0.8-13.5% increase in overall Se removal. Similarly, sulfate reduction also increased from 69.1- 88% at 30 °C to 72-94.6% at 50 °C. Most of the H₂ utilized was diverted towards Se and sulfate reduction with minimal production of byproducts such as methane (<0.32 mM) or volatile fatty acids (<0.92 mg/L). The elemental Se produced from selenite and selenate reduction ranged between 33.9 and 52.1 mg/L. The elemental selenium nanoparticles produced as a result of selenite and selenate reduction were characterized using transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX) and dynamic light scattering (DLS) spectroscopy. Furthermore, characterization of the biomass using Fourier-transform infrared spectroscopy (FTIR) and excitation emission matrix (EEM) spectra of the extracellular polymeric substances (EPS) produced by the waste activated sludge were performed to elucidate the mechanism of selenium oxyanion reduction to elemental selenium nanoparticles.

Characterization of exopolysaccharide derived from Enterobacter ludwigii and its possible role as an emulsifier

Enterobacter ludwigii is an oral growing bacteria responsible for teeth blackening. It can form biofilm. The exopolysaccharide (EPS) cluster associated with biofilm formation was isolated using ethanol precipitation and the formaldehyde-sodium hydroxide method. The chemical characterization of EPS was done using UV spectroscopy, Fourier transforms infrared spectroscopy, and gas chromatography-mass spectrometry. Energy-dispersive X-ray spectroscopy (EDS) analysis of  EPS has revealed the presence of carbon > boron > nitrogen > phosphorous > calcium > sulfur > iron > potassium > magnesium. The carbon content was quite high (72.72-77.63%) in the EPS due to polysaccharide composition. The study showed the presence of different monosaccharides glucose (16.91%), galactose (4.25%), mannose (4.04%), and xylose (8.06%) as the major components of EPS. It appears such as thin filaments with three-dimensional structure, compact, irregular lumps and stacked flakes of polysaccharides. The EPS was also examined using different 1D, 2D Nuclear Magnetic Resonance (NMR) spectroscopy techniques (1H NMR, 13C NMR, 1H-1H COSY, 1H-13C HSQC, 1H-13C HMBC) with different deuterated solvents (Protic and aprotic solvents for exchangeable protons), which showed eight distinguished monomers (seven confirmed by HSQC spectrum and one from 1H spectrum). Semi-crystalline nature and thermal stability were confirmed by X-ray diffractogram and differential scanning calorimetry analysis, respectively. The EPS further shows antioxidant potential in a concentration-dependent manner. It can form a stable emulsion against different edible oil that makes it promising alternative for use in food, and pharmaceutical industries.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-022-03279-z.

Selective removal and recovery of gallium and germanium from synthetic zinc refinery residues using biosorption and bioprecipitation

The depletion of primary ores, the environmental concerns related to mining activities, and the need to promote circular economy has drawn attention to the recycling of metallic compounds. Bio-based technologies are suitable for metal recovery, as they operate under mild conditions (ambient temperature and pressure) and are ideal for treating low-concentration waters. This study compared the effectiveness of adsorption and precipitation for the removal and recovery of gallium, germanium and zinc. Adsorption of the metallic ions on elemental forms of sulfur (S⁰), selenium (Se⁰) and tellurium (Te⁰), both of chemical and biological sources, was tested. Biosorption onto elemental forms of S⁰_bio, Se⁰_bio and Te⁰_bio effectively removed Ga and Zn. The highest removal efficiency (ղ) was obtained for Ga onto the adsorbent Te⁰_bio (69 ± 0.4%), with an adsorption capacity (q) of 74 mg Ga (g Te⁰_bio)^-1, followed by Zn (ղ = 40 ± 0.7%) with 43 mg Zn (g Te⁰_bio)^-1. Precipitation with chemical and biogenic sulfide at different metal to sulfide (Me/S) ratios was also assessed. Biologically produced sulfide was more efficient for Ga and Zn compared to chemical sulfide. Precipitation with biogenic sulfide was efficient for the removal of Ga (ղ = 59.9 ± 2.6%) and Zn (ղ = 44.2 ± 3.0%). The lowest ratio between metal to sulfide (Me/S = 0.2) achieved higher zinc removal efficiencies, whereas gallium removal was more efficient at Me/S = 1.5. None of the tested methods allowed for recovery of Ge. Biosorption and bioprecipitation gave nevertheless high removal and recovery of Ga and Zn.

Self-defense mechanisms of microorganisms from the antimicrobial effect of silver nanoparticles: Highlight the role of extracellular polymeric substances

Silver nanoparticles (AgNPs) are nowadays widely utilized in various fields due to their unique antimicrobial properties. Extracellular polymeric substances (EPS) excreted by microorganisms might affect the transformations and antibacterial efficacy of AgNPs. In the present study, the effects of EPS released by Escherichia coli (E. coli) on the dissolution and sulfidation of AgNPs as well as the associated growth inhibition to E. coli were systematically investigated. The formation of EPS-corona caused the reduced exposure of (111) facets of AgNPs due to the preferential binding with aromatic protein components in EPS. The EPS inhibited AgNPs dissolution, while facilitated reductive transformation of the released Ag⁺ to Ag⁰ under simulated sunlight. Additionally, EPS enhanced the colloidal stability and reduced electrostatic repulsive of AgNPs, which favored the access of sulfide and significantly promoted the sulfidation of AgNPs under simulated sunlight, further reducing the available dissolved Ag⁺ ions. Consequently, the EPS relieved the antibacterial activity of AgNPs to E. coli. These findings highlight the importance of microbial EPS in the transformations and bactericidal effect of AgNPs, which provide clues for the development of AgNPs-based antibacterial strategies.

Horizontal transfer of the multidrug resistance plasmid RP4 inhibits ammonia nitrogen removal dominated by ammonia-oxidizing bacteria

Antibiotic resistance genes (ARGs) have become an important public health concern. Particularly, although several ARGs have been identified in wastewater treatment plants (WWTPs), very few studies have characterized their impacts on reactor performance. Therefore, our study sought to investigate the effect of a representative conjugative transfer plasmid (RP4) encoding multidrug resistance genes on ammonia oxidation. To achieve this, we established sequencing batch reactors (SBRs) and a conjugation model with E. coli donor strains carrying the RP4 plasmid and a typical ammonia-oxidating (AOB) bacterial strain (Nitrosomonas europaea ATCC 25978) as a recipient to investigate the effect of conjugative transfer of plasmid RP4 on AOB. Our findings demonstrated that the RP4 plasmid carried by the donor strains could be transferred to AOB in the SBR and to Nitrosomonas europaea ATCC 25978. In SBR treated with donor strains carrying the RP4 plasmid, ammonia removal efficiency continuously decreased to 71%. Once the RP4 plasmid entered N. europaea ATCC 25978 in the conjugation model, ammonia removal was significantly inhibited and nitrite generation was decreased. Furthermore, the expression of several functional genes related to ammonia oxidation in AOB was suppressed following the transfer of the RP4 plasmid, including amoA, amoC, hao, nirK, and norB. In contrast, the cytL gene encoding cytochrome P460 was upregulated. These results demonstrated the ecological risk of ARGs in WWTPs, and therefore measures must be taken to avoid their transfer.

Comparative efficacy of bio-selenium nanoparticles and sodium selenite on morpho-physiochemical attributes under normal and salt stress conditions, besides selenium detoxification pathways in Brassica napus L

Selenium nanoparticles (SeNPs) have attracted considerable attention globally due to their significant potential for alleviating abiotic stresses in plants. Accordingly, further research has been conducted to develop nanoparticles using chemical ways. However, our knowledge about the potential benefit or phytotoxicity of bioSeNPs in rapeseed is still unclear. Herein, we investigated the effect of bioSeNPs on growth and physiochemical attributes, and selenium detoxification pathways compared to sodium selenite (Se (IV)) during the early seedling stage under normal and salt stress conditions. Our findings showed that the range between optimal and toxic levels of bioSeNPs was wider than Se (IV), which increased the plant’s ability to reduce salinity-induced oxidative stress. BioSeNPs improved the phenotypic characteristics of rapeseed seedlings without the sign of toxicity, markedly elevated germination, growth, photosynthetic efficiency and osmolyte accumulation versus Se (IV) under normal and salt stress conditions. In addition to modulation of Na⁺ and K⁺ uptake, bioSeNPs minimized the ROS level and MDA content by activating the antioxidant enzymes engaged in ROS detoxification by regulating these enzyme-related genes expression patterns. Importantly, the main effect of bioSeNPs and Se (IV) on plant growth appeared to be correlated with the change in the expression levels of Se-related genes. Our qRT-PCR results revealed that the genes involved in Se detoxification in root tissue were upregulated upon Se (IV) treated seedlings compared to NPs, indicating that bioSeNPs have a slightly toxic effect under higher concentrations. Furthermore, bioSeNPs might improve lateral root production by increasing the expression level of LBD16. Taken together, transamination and selenation were more functional methods of Se detoxification and proposed different degradation pathways that synthesized malformed or deformed selenoproteins, which provided essential mechanisms to increase Se tolerance at higher concentrations in rapeseed seedlings. Current findings could add more knowledge regarding the mechanisms underlying bioSeNPs induced plant growth.

Perfluorooctanoic acid triggers oxidative stress in anaerobic digestion of sewage sludge

Perfluorooctanoic acid (PFOA), as a recalcitrant organic pollutant, inevitably enters wastewater treatment facilities and is enriched in settled sludge. However, the potential impact of PFOA on sludge treatment has never been documented. In this study, the effect of PFOA on anaerobic digestion of sewage sludge and its underlying mechanism were investigated through batch and long-term experiments. The presence of PFOA was found to be deleterious for methane production from sewage sludge. 170 mg/kg total solids PFOA reduced the cumulative methane production from 197.1 ± 1.92-159.9 ± 3.10 mL/g volatile solids. PFOA induces the production of reactive oxygen species, which directly leads to cell inactivation and interferes with methane production. PFOA stimulates microorganisms to secrete more extracellular polymeric substances (mainly proteins), which not only hinders the solubilization of organic matter but also down-regulate enzyme activities to inhibit acidification and methanogenesis. In addition, PFOA reduces the diversity of microorganisms, especially the abundance of acid-producing bacteria and methanogens, making the microbial community unfavorable for methane production.

Aerobic granular sludge for efficient biotransformation of chalcogen SeIV and TeIV oxyanions: Biological nutrient removal and biogenesis of Se0 and Te0 nanostructures

Simultaneous removal of selenite (Se^IV), tellurite (Te^IV) and nutrients by aerobic granular sludge (AGS) was investigated. A sequencing batch reactor (SBR) was operated with increasing Se^IV and Te^IV (up to 500 µM each) for 205 days to evaluate metalloid oxyanion and nutrient removal. AGS efficiently removed Se^IV and Te^IV by readily converting them to biomass associated forms. The total Se and Te removal efficiencies were higher at 98% and 99%, respectively. Formation of biomass-associated Se⁰ and Te⁰ was confirmed by XRD, Raman spectroscopy and SEM-EDX. Feeding of Se^IV and Te^IV elicited inhibitory action on ammonium removal initially, nonetheless removal performance was recovered during the subsequent cycles. Ammonium, total nitrogen and phosphorus removals were stabilized at 85%, 80% and 75%, respectively, at 500 µM of Se^IV and Te^IV. Sequencing of 16S rRNA gene confirmed enrichment of known Se^IV and Te^IV reducing bacteria in the granules. qPCR and removal kinetics supported ammonia removal via nitritation-denitritation. This work demonstrates functional capabilities of AGS for effectively removing toxic Se^IV and Te^IV oxyanions apart from performing simultaneous COD, nitrogen and phosphorus removal. Efficient biological nutrient removal in the presence of toxic Se^IV and Te^IV concentrations, suggests robustness of AGS and its resilience to toxic contaminants.

Microbial selenate detoxification linked to elemental sulfur oxidation: Independent and synergic pathways

Elevated selenium levels in the environment, with soluble selenate [Se(VI)] as the common chemical species, pose a severe threat to human health. Anaerobic Se(VI) bioreduction is a promising approach for selenium detoxification, and various organic/inorganic electron donors have proved effective in supporting this bioprocess. Nevertheless, autotrophic Se(VI) bioreduction driven by solid inorganic electron donors is still not fully understood. This work is the first to employ elemental sulfur [S(0)] as electron donor to support Se(VI) bioreduction. A batch trial with mixed culture demonstrated the feasibility of this bioprocess, with Se(VI) removal efficiency of 92.4 ± 0.7% at an initial Se(VI) concentration of 10 mg/L within 36 h. Continuous column tests showed that increased initial concentration, flow rate, and introduction of NO₃^--N depressed Se(VI) removal. Se(VI) was mainly bioreduced to solid elemental Se with trace selenite in the effluent, while S(0) was oxidized to SO₄^2-. Enrichment of Thiobacillus, Desulfurivibrio, and Sulfuricurvum combined with upregulation of genes serA, tatC, and soxB indicated Se(VI) bioreduction was coupled to S(0) oxidation. Thiobacillus performed S(0) oxidation and Se(VI) reduction independently. Intermediate metabolites as volatile fatty acids, hydrogen and methane from S(0) oxidation were utilized by heterotrophic Se(VI) reducers for Se(VI) detoxification, indicative of microbial synergy.

Microbial reduction and resistance to selenium: Mechanisms, applications and prospects

Selenium is an essential trace element for humans, animals and microorganisms. Microbial transformations, in particular, selenium dissimilatory reduction and bioremediation applications have received increasing attention in recent years. This review focuses on multiple Se-reducing pathways under anaerobic and aerobic conditions, and the phylogenetic clustering of selenium reducing enzymes that are involved in these processes. It is emphasized that a selenium reductase may have more than one metabolic function, meanwhile, there are several Se(VI) and/or Se(IV) reduction pathways in a bacterial strain. It is noted that Se(IV)-reducing efficiency is inconsistent with Se(IV) resistance in bacteria. Moreover, we discussed the links of selenium transformations to biogeochemical cycling of other elements, roles of Se-reducing bacteria in soil, plant and digestion system, and the possibility of using functional genes involved in Se transformation as biomarker in different environments. In addition, we point out the gaps and perspectives both on Se transformation mechanisms and applications in terms of bioremediation, Se fortification or dietary supplementation.

Simultaneous removal of lead and selenium through biomineralization as lead selenide by anaerobic granular sludge

This study demonstrated the simultaneous removal of lead (Pb) and selenium (Se) as lead selenide biomineralization using anaerobic granular sludge. The microbial community of the granular sludge was first enriched for 140 days in the presence of Pb(II) only, selenate and selenite only, Pb(II)+selenate, and Pb(II)+selenite. In the absence of Se, removal of Pb(II) mainly occurred via biosorption and deposited on the biomass as lead oxide and lead carbonate. The Pb removal efficiency (94% of initial 50 mg L^-1) was reduced to 90% and 86% in the presence of selenate and selenite, respectively, due to biosorption. Addition of Pb(II) didn't exert any toxic effect on the Se-reducing microbial community, on the contrary: Pb(II) addition improved the Se removal efficiency for selenate from 85% to 90%, but did not affect selenite removal after 14 d of incubation. The bioreduction of the Se-oxyanions produced elemental Se (Se(0)) and selenide, which later interacted with Pb(II) to produce lead selenide (PbSe). Adsorption of Pb(II) onto the Se(0) nanoparticles and precipitation as the Se(0)-Pb complex might also have contributed to the simultaneous removal of Pb and Se. XPS and XRD analysis further confirmed the immobilization of Pb as PbSe, PbO and PbCO₃ in the biomass.

Selenite bioreduction and biosynthesis of selenium nanoparticles by Bacillus paramycoides SP3 isolated from coal mine overburden leachate

A native strain of Bacillus paramycoides isolated from the leachate of coal mine overburden rocks was investigated for its potential to produce selenium nanoparticles (SeNPs) by biogenic reduction of selenite, one of the most toxic forms of selenium. 16S rDNA sequencing was used to identify the bacterial strain (SP3). The SeNPs were characterized using spectroscopic (UV-Vis absorbance, dynamic light scattering, X-ray diffraction, and Raman), surface charge measurement (zeta potential), and ultramicroscopic (FESEM, EDX, FETEM) analyses. SP3 exhibited extremely high selenite tolerance (1000 mM) and reduced 10 mM selenite under 72 h to produce spherical monodisperse SeNPs with an average size of 149.1 ± 29 nm. FTIR analyses indicated exopolysaccharides coating the surface of SeNPs, which imparted a charge of -29.9 mV (zeta potential). The XRD and Raman spectra revealed the SeNPs to be amorphous. Furthermore, biochemical assays and microscopic studies suggest that selenite was reduced by membrane reductases. This study reports, for the first time, the reduction of selenite and biosynthesis of SeNPs by B. paramycoides, a recently discovered bacterium. The results suggest that B. paramycoides SP3 could be exploited for eco-friendly removal of selenite from contaminated sites with the concomitant biosynthesis of SeNPs.

Magnetic properties of biogenic selenium nanomaterials

Bioreduction of selenium oxyanions to elemental selenium is ubiquitous; elucidating the properties of this biogenic elemental selenium (BioSe) is thus important to understand its environmental fate. In this study, the magnetic properties of biogenic elemental selenium nanospheres (BioSe-Nanospheres) and nanorods (BioSe-Nanorods) obtained via the reduction of selenium(IV) using anaerobic granular sludge taken from an upflow anaerobic sludge blanket (UASB) reactor treating paper and pulp wastewater were investigated. The study indicated that the BioSe nanomaterials have a strong paramagnetic contribution with some ferromagnetic component due to the incorporation of Fe(III) (high-spin and low-spin species) as indicated by electron paramagnetic resonance (EPR). The paramagnetism did not saturate up to 50,000 Oe at 5 K, and the hysteresis curve showed the coercivity of 100 Oe and magnetic moment saturation around 10 emu. X-ray photoelectron spectroscopy (XPS) and EPR evidenced the presence of Fe(III) in the nanomaterial. Signals for Fe(II) were observed neither in EPR nor in XPS ruling out its presence in the BioSe nanoparticles. Fe(III) being abundantly present in the sludge likely got entrapped in the extracellular polymeric substances (EPS) coating the biogenic nanomaterials. The presence of Fe(III) in BioSe nanomaterial increases the mobility of Fe(III) and may have an effect on phytoplankton growth in the environment. Furthermore, as supported by the literature, there is a potential to exploit the magnetic properties of BioSe nanomaterials in drug delivery systems as well as in space refrigeration.

Antimicrobial Activity of Se-Nanoparticles from Bacterial Biotransformation

Selenium nanoparticles (SeNPs) are gaining importance in the food and medical fields due to their antibacterial properties. The microbial inhibition of these kinds of particles has been tested in a wide range of Gram (+) and Gram (−) pathogenic bacteria. When SeNPs are synthesized by biological methods, they are called biogenic SeNPs, which have a negative charge caused by their interaction between surface and capping layer (bioorganic material), producing their high stability. This review is focused on SeNPs synthesis by bacteria and summarizes the main factors that influence their main characteristics: shape, size and surface charge, considering the bacteria growth conditions for their synthesis. The different mechanisms of antimicrobial activity are revised, and this review describes several biosynthesis hypotheses that have been proposed due to the fact that the biological mechanism of SeNP synthesis is not fully known.

Highly stable selenium nanoparticles: Assembly and stabilization via flagellin FliC and porin OmpF in Rahnella aquatilis HX2

Microorganisms play a critical role in the reduction of the more toxic selenite and selenate to the less toxic elemental selenium. However, the assembly process and stability of selenium nanoparticles (SeNPs) remain understudied. The plant growth-promoting rhizobacterium Rahnella aquatilis HX2 can reduce selenite to biogenic SeNPs (BioSeNPs). Two main proteins, namely flagellin FliC and porin OmpF were identified in the BioSeNPs. The fliC and ompF gene mutation experiments demonstrated that the FliC and OmpF could control the assembly of BioSeNPs in vivo. At the same time, the expressed and purified FliC and OmpF could control the assembly of SeNPs in vitro. BioSeNPs produced by R. aquatilis HX2 exhibited high stability under various ionic strengths, while the chemically synthesized SeNPs (CheSeNPs) showed a high level of aggregation. The in vitro experiments verified that FliC and OmpF could prevent the aggregation of the CheSeNPs under various ionic strengths. This work reports the preparation of highly stable BioSeNPs produced by strain R. aquatilis HX2 and verifies that FliC and OmpF both could control the assembly and stability of BioSeNPs. BioSeNPs with high stability could be suitable as nutritional supplement to remedy selenium deficiency and in nanomedicine applications.

Impact of the Microbial Origin and Active Microenvironment on the Shape of Biogenic Elemental Selenium Nanomaterials

The shape of nanomaterials affects their colloidal properties, cellular uptake, and fate in the environment. The microbial origin and microenvironment can play a role in altering the shape of the nanomaterial. However, such studies have never been conducted. Here, we demonstrate that the selenium nanomaterials produced by Escherichia coli K-12 are stable and remain as BioSe-Nanospheres under thermophilic conditions, while those produced by anaerobic granular sludge transform to BioSe-Nanorods, due to a lower quantity of proteins coating these nanoparticles, which has been verified by proteomics analysis as well as using chemically synthesized selenium nanomaterials. Furthermore, the presence of Bacillus safensis JG-B5T transform the purified BioSe-Nanospheres produced by E. coli K-12 to BioSe-Nanorods, though they are not transformed in the absence of B. safensis JG-B5T. This is due to the production of peptidases by B. safensis JG-B5T that cleaves the protein coating the BioSe-Nanospheres produced by E. coli K-12, leading to their transformation to trigonal BioSe-Nanorods, which is the thermodynamically more stable state. These findings suggest that the fate of selenium and probably other redox-active elements released from the biological wastewater treatment units needs to be reevaluated and improved by including microbial criteria for better accuracy.

Selenium respiration in anaerobic bacteria: Does energy generation pay off?

Selenium (Se) respiration in bacteria was revealed for the first time at the end of 1980s. Although thermodynamically-favorable, energy-dense and documented in phylogenetically-diverse bacteria, this metabolic process appears to be accompanied by a number of challenges and numerous unanswered questions. Selenium oxyanions, SeO₄^2- and SeO₃^2-, are reduced to elemental Se (Se⁰) through anaerobic respiration, the end product being solid and displaying a considerable size (up to 500 nm) at the bacterial scale. Compared to other electron acceptors used in anaerobic respiration (e.g. N, S, Fe, Mn, and As), Se is one of the few elements whose end product is solid. Furthermore, unlike other known bacterial intracellular accumulations such as volutin (inorganic polyphosphate), S⁰, glycogen or magnetite, Se⁰ has not been shown to play a nutritional or ecological role for its host. In the context of anaerobic respiration of Se oxyanions, biogenic Se⁰ appears to be a by-product, a waste that needs proper handling, and this raises the question of the evolutionary implications of this process. Why would bacteria use a respiratory substrate that is useful, in the first place, and then highly detrimental? Interestingly, in certain artificial ecosystems (e.g. upflow bioreactors) Se⁰ might help bacterial cells to increase their density and buoyancy and thus avoid biomass wash-out, ensuring survival. This review article provides an in-depth analysis of selenium respiration (model selenium respiring bacteria, thermodynamics, respiratory enzymes, and genetic determinants), complemented by an extensive discussion about the evolutionary implications and the properties of biogenic Se⁰ using published and original/unpublished results.

Hydrodynamics- and hydrochemistry-affected microbial selenate reduction in aquifer: Performance and mechanisms

Selenate [Se(VI)] with higher content in groundwater will be harmful for human beings. Hence, effective treatment for Se(VI) in aquifer should be conducted reasonably. Microbial reduction of Se(VI) to elemental selenium with weak movability and toxicity has attracted significant attention due to its high efficiency and no secondary contamination. However, hydrodynamic and hydrochemical influences with corresponding mechanisms during Se(VI) bioreduction are still not clear. In this study, influences of flow rate, initial Se(VI) and organic concentrations, coexisting nitrate were evaluated. Se(VI) removal efficiency and capacity reached 96.42 ± 6.82% and 41.28 ± 3.41 (g/m³·d) with flow rate of 0.56 mL/min, initial Se(VI) and chemical organic demand concentrations of 10 mg/L and 400 mg/L. Dechloromonas and Pseudomonas were presumably contributed to Se(VI) reduction, with upregulated serA and tatC genes. Solid Se⁰ was identified as the final product from Se(VI) reduction. These results will be beneficial for the further comprehending of Se(VI) remediation in aquifer.

Nanoparticles-EPS corona increases the accumulation of heavy metals and biotoxicity of nanoparticles

Microbial extracellular polymeric substances (EPS) coating nanoparticles (NPs) surface can form NPs-EPS corona, which significantly affect the adsorption of NPs to toxic substances and alter the ecotoxicological effect of NPs. In this work, the EPS coronas on TiO₂ NPs (TNPs) and CeO₂ NPs (CNPs) were characterized and the adsorption characteristics of NPs with and without EPS corona to five heavy metals were investigated in single-metal and multiple-metal systems. The results of spectral analysis showed that NPs-EPS corona exhibited new crystalline phases and abundant functional groups. Moreover, 42 and 13 proteins were identified in the TNPs-EPS and CNPs-EPS coronas, respectively. The rates of Cd²⁺, Pb²⁺, Cu²⁺, Ni²⁺ and Ag⁺ adsorption by NPs-EPS corona increased to values that were 6.7-7.6, 4.4-5.1, 4.2-5.5, 3.9-4.9 and 8.5-8.8 times those of NPs without EPS corona, respectively, in single-metal system. NPs-EPS coronas are effective in absorbing Ag⁺, Pb²⁺ and Cu²⁺ compared with Cd²⁺and Ni²⁺ in multiple metal adsorption. These results indicated that NPs-EPS corona effectively adsorb and remove heavy metals by forming NPs-EPS-metal complexes and inducing precipitation. However, NPs-EPS corona can enhance the toxicity of NPs by accumulating highly-toxic heavy metals in aquatic environments.

Biogenic selenium nanoparticles produced by Lactobacillus casei ATCC 393 inhibit colon cancer cell growth in vitro and in vivo

Selenium compounds exhibit excellent anticancer properties but have a narrow therapeutic window. Selenium nanoparticles, however, are less toxic compared to other selenium forms, and their biogenic production leads to improved bioavailability. Herein, we used the probiotic strain Lactobacillus casei ATCC 393, previously shown to inhibit colon cancer cell growth, to synthesize biogenic selenium nanoparticles. We examined the anticancer activity of orally administered L. casei, L. casei-derived selenium nanoparticles and selenium nanoparticle-enriched L. casei, and investigated their antitumor potential in the CT26 syngeneic colorectal cancer model in BALB/c mice. Our results indicate that L. casei-derived selenium nanoparticles and selenium nanoparticle-enriched L. casei exert cancer-specific antiproliferative activity in vitro. Moreover, the nanoparticles were found to induce apoptosis and elevate reactive oxygen species levels in cancer cells. It is noteworthy that, when administered orally, selenium nanoparticle-enriched L. casei attenuated the growth of colon carcinoma in mice more effectively than the isolated nanoparticles or L. casei, suggesting a potential additive effect of the nanoparticles and the probiotic. To the best of our knowledge this is the first comparative study examining the anticancer effects of selenium nanoparticles synthesized by a microorganism, the selenium nanoparticle-enriched microorganism and the sole microorganism.

In situ prepared algae-supported iron sulfide to remove hexavalent chromium

The effects of algae on the removal of contaminant by iron sulfide (FeS) are still unknown. Chlorella vulgaris (CV), a remarkable algal specie, was used to prepare the CV-supported FeS (CV-FeS) and to investigate the role that CV plays in the removal of a heavy metal (i.e., hexavalent chromium (Cr(VI)) by FeS. The stabilized effect from algal extracellular polymeric substance (EPS) enhanced the reactivity of FeS due to the decrease of FeS aggregation, thus increasing Cr(VI) removal rate from 0.21 min^-1 to 0.79 min^-1. Furthermore, the strong buffering induced by the algal functional groups could effectively prevent the solution pH from increasing, which improved Cr(VI) removal because acidic solution facilitated Cr(VI) reduction by FeS. However, the complexing capacity from algal EPS made Fe(II) unavailable for Cr(VI) reduction, which led to 35% decrease of Cr(VI) removal. The Fe(II) was oxidized to α-FeOOH by Cr(VI) in the absence of CV, while the unreacted Fe(II) was detected as in the form of Fe(OH)₂ in CV-FeS. Cr(VI) was reduced to Cr(III) and S(-II) was oxidized to elemental sulfur (S₈) regardless of the CV. This work showed the different roles of algae in the removal of Cr(VI) by FeS and provided value information for the application of FeS in the polluted algae-containing water system.

Bioactive anti-oxidative polycaprolactone/gelatin electrospun nanofibers containing selenium nanoparticles/vitamin E for wound dressing applications

In this study, polycaprolactone/gelatin (PCL/GEL) electrospun nanofibers containing biogenic selenium nanoparticles (Se NPs) and Se NPs/vitamin E (VE) with average diameters of 397.8 nm and 279.5 nm, respectively (as determined by SEM inspection) were prepared and their effect on wound healing was evaluated using in-vivo studies. The energy dispersive X-ray (EDX) mapping, TEM micrograph, and FTIR spectra of the prepared nanofibers strongly demonstrated well entrapment of Se NPs and VE into scaffolds. An amount of 57% Se NPs and 43% VE were gradually released from PCL/GEL/Se NPs/VE scaffold after 4 days immersion in PBS solution (pH 7.4). The both PCL/GEL/Se NPs and PCL/GEL/Se NPs/VE scaffolds supported 3T3 cell proliferation and attachment as confirmed by MTT assay and SEM imaging. Complete re-epithelialization, low level of edema and inflammatory cells in coordination with high level of oriented collagens demonstrated the wound healing activity of PCL/GEL/Se NPs/VE. Besides, significant antioxidant efficacy of PCL/GEL/Se NPs and PCL/GEL/Se NPs/VE scaffolds was demonstrated according to GSH and MDA assays. To sum up, the prepared PCL/GEL/Se NPs/VE scaffold in the present study represented suitable healing effect on animal model which candidate it for further studies.