Microbial Corrosion of Aluminum 2024 Aeronautical Alloy by Hydrocarbon Degrading Bacteria Bacillus cereus ACE4 and Serratia marcescens ACE2

Microbial applications for sustainable space exploration beyond low Earth orbit

With the construction of the International Space Station, humans have been continuously living and working in space for 22 years. Microbial studies in space and other extreme environments on Earth have shown the ability for bacteria and fungi to adapt and change compared to "normal" conditions. Some of these changes, like biofilm formation, can impact astronaut health and spacecraft integrity in a negative way, while others, such as a propensity for plastic degradation, can promote self-sufficiency and sustainability in space. With the next era of space exploration upon us, which will see crewed missions to the Moon and Mars in the next 10 years, incorporating microbiology research into planning, decision-making, and mission design will be paramount to ensuring success of these long-duration missions. These can include astronaut microbiome studies to protect against infections, immune system dysfunction and bone deterioration, or biological in situ resource utilization (bISRU) studies that incorporate microbes to act as radiation shields, create electricity and establish robust plant habitats for fresh food and recycling of waste. In this review, information will be presented on the beneficial use of microbes in bioregenerative life support systems, their applicability to bISRU, and their capability to be genetically engineered for biotechnological space applications. In addition, we discuss the negative effect microbes and microbial communities may have on long-duration space travel and provide mitigation strategies to reduce their impact. Utilizing the benefits of microbes, while understanding their limitations, will help us explore deeper into space and develop sustainable human habitats on the Moon, Mars and beyond.

Characterization of petroleum degrading bacteria and its optimization conditions on effective utilization of petroleum hydrocarbons

Hydrocarbon contamination is continuing to be a serious environmental problem because of their toxicity. Hydrocarbon components have been known to be carcinogens and neurotoxic organic pollutants. The physical and chemical methods of petroleum removal have become ineffective and also are very costly. Therefore, bioremediation is considered the promising technology for the treatment of these contaminated sites since it is cost-effective and will lead to complete mineralization.The current study also concentrates on bioremediation of petroleum products by bacterium isolated from petroleum hydrocarbon contaminated soil. The current work shows that bacterial strains obtained from a petroleum hydrocarbon contaminated environment may degrade petroleum compounds. Two strains Bacillus licheniformis ARMP2 and Pseudomonas aeruginosa ARMP8 were identified as petroleum-degrading bacteria of the isolated bacterial colonies. The best growth conditions for the ARMP2 strain were determined to be pH 9, temperature 29 °C with sodium nitrate as its nitrogen source, whereas for the ARMP8 strain the optimal growth was found at pH 7, temperature 39 °C, and ammonium chloride as the nitrogen source. Both strains were shown to be effective at degrading petroleum chemicals confirmed by GCMS. Overall petroleum product degradation efficiency of the strains ARMP2 and ARMP8 was about 88 % and 73 % respectively in 48 h.The strains Bacillus licheniformis ARMP2 and Pseudomonas aeruginosa ARMP8 were shown to be effective at degrading petroleum compounds in the current study. Even greater results might be obtained if the organisms were utilised in consortia or the degradation time period was extended.

High-efficiency, environment-friendly moss-enriched microbial fuel cell

Microbial fuel cells (MFCs) can be used to produce clean energy from organic wastes. Various biomasses for MFCs can be used as biofuel materials. Moss (Bryophyta) is a source of biomass materials and can be used as an alternative fuel for microbial fuel cells. In this study, moss-enriched MFCs were produced by using moss as a biofuel source and aluminum and silver as an electrode. As a result of the good electrochemical performance of the metal electrodes (aluminum and silver), higher power density than previous studies involving moss was obtained, with the highest power density in this study being 20 mW/m2. Moreover, in this study, bacterial activity, biofilm formation, soil utilization, pH change, and corrosion were investigated in MFCs and the effects of MFC on power density were discussed. The addition of soil increased the corrosion rate and internal resistance while reducing the power density. As a result of the addition of soil, the power density dropped to 16.13 mW/m2. The corrosion rate was lower than industrial corrosion. Changes in pH confirmed that organic material dissolved and chemical reactions took place. Scanning electron microscope (SEM)-Energy dispersive spectroscopy (EDS) analyzes showed the presence of Bacillus and Coccus bacteria species on the electrode surfaces. These bacteria were acted as biocatalysts by forming a biofilm on the electrode surfaces.

Understanding the Complexities and Changes of the Astronaut Microbiome for Successful Long-Duration Space Missions

During space missions, astronauts are faced with a variety of challenges that are unique to spaceflight and that have been known to cause physiological changes in humans over a period of time. Several of these changes occur at the microbiome level, a complex ensemble of microbial communities residing in various anatomic sites of the human body, with a pivotal role in regulating the health and behavior of the host. The microbiome is essential for day-to-day physiological activities, and alterations in microbiome composition and function have been linked to various human diseases. For these reasons, understanding the impact of spaceflight and space conditions on the microbiome of astronauts is important to assess significant health risks that can emerge during long-term missions and to develop countermeasures. Here, we review various conditions that are caused by long-term space exploration and discuss the role of the microbiome in promoting or ameliorating these conditions, as well as space-related factors that impact microbiome composition. The topics explored pertain to microgravity, radiation, immunity, bone health, cognitive function, gender differences and pharmacomicrobiomics. Connections are made between the trifecta of spaceflight, the host and the microbiome, and the significance of these interactions for successful long-term space missions.

Biological and Corrosion Evaluation of In Situ Alloyed NiTi Fabricated through Laser Powder Bed Fusion (LPBF)

In this work, NiTi alloy parts were fabricated using laser powder bed fusion (LBPF) from pre-alloyed NiTi powder and in situ alloyed pure Ni and Ti powders. Comparative research on the corrosive and biological properties of both studied materials was performed. Electrochemical corrosion tests were carried out in phosphate buffered saline at 37 °C, and the degradation rate of the materials was described based on Ni ion release measurements. Cytotoxicity, bacterial growth, and adhesion to the surface of the fabricated coupons were evaluated using L929 cells and spherical Escherichia coli (E. coli) bacteria, respectively. The in situ alloyed NiTi parts exhibit slightly lower corrosion resistance in phosphate buffered saline solution than pre-alloyed NiTi. Moreover, the passive layer formed on in situ alloyed NiTi is weaker than the one formed on the NiTi fabricated from pre-alloyed NiTi powder. Furthermore, in situ alloyed NiTi and NiTi made from pre-alloyed powders have comparable cytotoxicity and biological properties. Overall, the research has shown that nitinol sintered using in situ alloyed pure Ni and Ti is potentially useful for biomedical applications.

Characterization of crude oil degrading bacterial communities and their impact on biofilm formation

In the present study, produced water sample collected from the Indian crude oil reservoir is used to enrich the bacterial communities. The impact of these enriched bacterial communities on the biodegradation of crude oil, biofilm formation, and biocorrosion process are elucidated. A crude oil degradation study is carried out with the minimal salt medium and 94% of crude oil was utilized by enriched bacterial communities. During the crude oil degradation many enzymes including alkane hydroxylase, alcohol dehydrogenase, and lipase are playing a key role in the biodegradation processes. The role of enriched bacterial biofilm on biocorrosion reactions are monitored by weight loss studies and electrochemical analysis. Weight loss study revealed that the biotic system has vigorous corrosion attacks compared to the abiotic system. Both AC-Impedance and Tafel analysis confirmed that the nature of the corrosion reaction take place in the biotic system. Very less charge transfer resistance and higher corrosion current are observed in the biotic system than in the abiotic system. Scanning electron microscope confirms that the dense biofilm formation favoured the pitting type of corrosion. X-ray diffraction analysis confirms that the metal oxides formed in the corrosion systems (biotic). From the metagenomic analysis of the V3-V4 region revealed that presence of diverse bacterial communities in the biofilm, and most of them are uncultured/unknown. Among the known genus, Bacillus, Halomonas, etc are dominant in the enriched bacterial biofilm sample. From this study, we conclude that the uncultured bacterial strains are found to be playing a key role in the pitting type of corrosion and they can utilize crude oil hydrocarbons, which make them succeeded in extreme oil reservoir environments.

Di-n-octyl phthalate degradation by a halotolerant bacterial consortium LF and its application in soil

Di-n-octyl phthalate (DOP), a plasticizer used in many different industrial products, is a frequently observed pollutant in the environment. Biodegradation by microorganisms is considered to be a realistic choice for the remediation of DOP contamination. In the present research, the halotolerant bacterial consortium (LF) enriched in our previous research was used to degrade DOP. It was found that the optimal conditions for LF to degrade DOP was temperature 30^oC, pH 6.0, inoculum size >5%, and salt content <3%. LF could degrade a high concentration of DOP (2000 mg/L) with the removal efficiency of 96.33%. Substrate inhibition analyses indicated that the inhibition constant, maximum specific degradation rate and half-saturation constant were 2544.6 mg/L, 0.7 d^-1 and 59.1 mg/L, respectively. Based on the analysis of the gas chromatography-mass spectrometry (GC-MS), the biodegradation pathway for DOP by LF was proposed. Furthermore, LF could degrade DOP in soil (100 mg/kg) with the highest removal efficiency of 89.3%. This study is the first report on DOP biodegradation by bacterial consortium. These results suggest that LF can be used to remediate DOP-contaminated environment.

Bio-electrokinetic remediation of crude oil contaminated soil enhanced by bacterial biosurfactant

The present study evaluating the coupling between bioremediation (BIO) and electrokinetic (EK) remediation of crude oil hydrocarbon by using bio-electrokinetic (BIO-EK) technique. The application of bacterial biosurfactant (BS) may increase the remediation efficiency by increasing the solubility of organic materials. In this work, the potential biosurfactant producing marine bacteria were isolated and identified by 16S rDNA analysis namely Bacillus subtilis AS2, Bacillus licheniformis AS3 and Bacillus velezensis AS4. Biodegradation efficiency of crude oil was found as 88%, 92% and 97% for strain AS2, AS3 and AS4 respectively, with the optimum temperature of 37 °C and pH 7. FTIR confirm the BS belongs to lipopeptide in nature. GCMS reveals that three isolates degraded the lower to higher molecular weight of the crude oil (C₈ to C₂₈) effectively. Results showed that use of BS in electokinetic remediation enhance the biodegradation rate of crude oil contaminated soil about 92% than EK (60%) in 2 days operation. BS enhances the solubilization of hydrocarbon and it leads to the faster electromigration of hydrocarbon to the anodic compartment, which was confirmed by the presence of higher total organic content than the EK. This study proven that the BIO-EK combined with BS can be used to enhance in situ bioremediation of petroleum contaminated soils.

Microbial corrosion of metals: The corrosion microbiome

Microbially catalyzed corrosion of metals is a substantial economic concern. Aerobic microbes primarily enhance Fe⁰ oxidation through indirect mechanisms and their impact appears to be limited compared to anaerobic microbes. Several anaerobic mechanisms are known to accelerate Fe⁰ oxidation. Microbes can consume H₂ abiotically generated from the oxidation of Fe⁰. Microbial H₂ removal makes continued Fe⁰ oxidation more thermodynamically favorable. Extracellular hydrogenases further accelerate Fe⁰ oxidation. Organic electron shuttles such as flavins, phenazines, and possibly humic substances may replace H₂ as the electron carrier between Fe⁰ and cells. Direct Fe⁰-to-microbe electron transfer is also possible. Which of these anaerobic mechanisms predominates in model pure culture isolates is typically poorly documented because of a lack of functional genetic studies. Microbial mechanisms for Fe⁰ oxidation may also apply to some other metals. An ultimate goal of microbial metal corrosion research is to develop molecular tools to diagnose the occurrence, mechanisms, and rates of metal corrosion to guide the implementation of the most effective mitigation strategies. A systems biology approach that includes innovative isolation and characterization methods, as well as functional genomic investigations, will be required in order to identify the diagnostic features to be gleaned from meta-omic analysis of corroding materials. A better understanding of microbial metal corrosion mechanisms is expected to lead to new corrosion mitigation strategies. The understanding of the corrosion microbiome is clearly in its infancy, but interdisciplinary electrochemical, microbiological, and molecular tools are available to make rapid progress in this field.

Antimicrobial surfaces: a review of synthetic approaches, applicability and outlook

The rapid spread of microorganisms such as bacteria, fungi, and viruses can be extremely detrimental and can lead to seasonal epidemics or even pandemic situations. In addition, these microorganisms may bring about fouling of food and essential materials resulting in substantial economic losses. Typically, the microorganisms get transmitted by their attachment and growth on various household and high contact surfaces such as doors, switches, currency. To prevent the rapid spread of microorganisms, it is essential to understand the interaction between various microbes and surfaces which result in their attachment and growth. Such understanding is crucial in the development of antimicrobial surfaces. Here, we have reviewed different approaches to make antimicrobial surfaces and correlated surface properties with antimicrobial activities. This review concentrates on physical and chemical modification of the surfaces to modulate wettability, surface topography, and surface charge to inhibit microbial adhesion, growth, and proliferation. Based on these aspects, antimicrobial surfaces are classified into patterned surfaces, functionalized surfaces, superwettable surfaces, and smart surfaces. We have critically discussed the important findings from systems of developing antimicrobial surfaces along with the limitations of the current research and the gap that needs to be bridged before these approaches are put into practice.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10853-021-06404-0.

A Mixture of D-Amino Acids Enhances the Biocidal Efficacy of CMIT/MIT Against Corrosive Vibrio harveyi Biofilm

Biocides are widely used for the mitigation of microbial contamination, especially in the field of the aviation fuel industry. However, the long-term use of biocide has raised the concerns regarding the environmental contamination and microbial drug resistance. In this study, the effect of a mixture of D-amino acids (D-tyrosine and D-methionine) on the enhancement of the bactericidal effect of 5-Chloro-2-Methyl-4-isothiazolin-3-one/2-Methyl-2H-isothiazole-3-one (CMIT/MIT) against corrosive Vibrio harveyi biofilm was evaluated. The results revealed that D-Tyr and D-Met alone can enhance the biocidal efficacy of CMIT/MIT, while the treatment of 5 ppm CMIT/MIT, 1 ppm D-Tyr and 100 ppm D-Met showed the best efficacy comparable to that of 25 ppm CMIT/MIT alone. The triple combination treatment successfully prevented the establishment of the corrosive V. harveyi biofilm and effectively removed the mature V. harveyi biofilm. These conclusions were confirmed by the results of sessile cell counts, images obtained by scanning electron microscope and confocal laser scanning microscope, and the ATP test kit.

Microbial degradation, spectral analysis and toxicological assessment of malachite green by Streptomyces chrestomyceticus S20

Malachite green (MG), a triphenylmethane dye is extensively used for coloring silk, aquaculture and textile industries, it has also has been reported toxic to life forms. This study aimed to investigate the biodegradation potential of MG by actinobacteria. The potent actinobacterial strain S20 used in this study was isolated from forest soil (Sabarimala, Kerala, India) and identified as Streptomyces chrestomyceticus based on phenotype and molecular features. Strain S20 degraded MG up to 59.65 ± 0.68% was studied in MSM medium and MG (300 mg l^-1) and degradation was increased (90-99%) by additions of 1% glucose and yeast extract into the medium at pH 7. The treated metabolites from MG by S20 characterized by FT-IR and GC-MS. The results showed MG has been degraded into nontoxic compounds evaluated by (1) phytotoxic assay on Vigna radiata, (2) microbial toxicity on Staphylococcus aureus, Bacillus subtilis, Micrococcus luteus, Streptococcus sp. and Escherichia coli, (3) cytotoxicity assay in a human cell line (MCF 7). The toxicity studies demonstrated that the byproducts from MG degradation by S. chrestomyceticus S20 were no toxic to plants and microbes and less toxic to human cells as compared to the parent MG. Perhaps this is the first work reported on biodegradation of MG by S. chrestomyceticus which could be a potential candidate for the removal of MG from various environments.

Effect of Bacillus subtilis on corrosion behavior of 10MnNiCrCu steel in marine environment

Bacillus widely exists in wet natural environment such as soil, water and air, and is often studied as one of representative microorganisms for microbiologically influenced corrosion(MIC) research. In this paper, the growth curve of Bacillus subtilis isolated from marine environment was determined by turbidimetry and its effect on corrosion behavior of 10MnNiCrCu steel was studied by open circuit potential, AC impedance, polarization curve and scanning electron microscopy(SEM). The results showed that with the change of the growth curve of Bacillus subtilis(BS), the open circuit potential(E_ocp) shifted positively and then negatively, and the charge transfer resistance shown by AC impedance was much lower than that of the sterile system, increasing first and then decreasing. The polarization curves showed that the corrosion current density in BS medium was obviously higher than that in sterile system. The corrosion morphology observation showed that although a biofilm by BS developed on the steel surface, the localized corrosion of 10MnNiCrCu steel was aggravated due to the acidness of the metabolite itself and the biofilm with access for electrolyte ions.

Nutrient Level Determines Biofilm Characteristics and Subsequent Impact on Microbial Corrosion and Biocide Effectiveness

The impact that nutrient level has on biofilm characteristics, biocide effectiveness, and the associated risk of microbiologically influenced corrosion (MIC) was assessed using multispecies biofilms from two different oilfield consortia. A range of microbiological, microscopy, and corrosion methods demonstrated that the continuous flow of nutrients for the microbial growth resulted in higher activity, thickness, and robustness of the biofilms formed on carbon steel, which induced greater localized corrosion compared to biofilms formed under batch, nutrient-depleted conditions. Despite of the differences in biofilm characteristics, biofilms displayed comparable susceptibilities to glutaraldehyde biocide, with similar log10 reductions and percent reductions of microorganisms under both nutrient conditions. Nevertheless, nutrient replenishment impacted the effectiveness of the biocide in controlling microbial populations; a higher concentration of cells survived the biocide treatment in biofilms formed under a continuous flow of nutrients. Complementary DNA-/RNA-based amplicon sequencing and bioinformatics analysis were used to discriminate the active within the total populations in biofilms established at the different nutrient conditions and allowed the identification of the microbial species that remained active despite nutrient depletion and biocide treatment. Detection of persistent active microorganisms after exposure to glutaraldehyde, regardless of biofilm structure, suggested the presence of microorganisms less susceptible to this biocide and highlighted the importance of monitoring active microbial species for the early detection of biocide resistance in oil production facilities.IMPORTANCE Microbiologically influenced corrosion (MIC) is a complex process that generates economic losses to the industry every year. Corrosion must be managed to prevent a loss of containment of produced fluids to the external environment. MIC management includes the identification of assets with higher MIC risk, which could be influenced by nutrient levels in the system. Assessing biofilms under different nutrient conditions is essential for understanding the impact of flow regime on microbial communities and the subsequent impact on microbial corrosion and on the effectiveness of biocide treatment. This investigation simulates closely oil production systems, which contain piping sections exposed to continuous flow and sections that remain stagnant for long periods. Therefore, the results reported here are useful for MIC management and prevention. Moreover, the complementary methodological approach applied in this investigation highlighted the importance of implementing RNA-based methods for better identification of active microorganisms that survive stress conditions in oil systems.

Non-contact electrochemical evaluation of biofilms

Abstract

Here, we demonstrate a non-contact technique for electrochemical evaluation of biofilms on surfaces in relation to corrosion. Electrochemical impedance spectrometry was employed, incorporating flat patterned electrodes positioned over the surfaces of aluminum and glass with and without biofilms. Signal communication from the working electrode to the counter electrode followed electric field lines passing tangentially through the biofilms. Electrochemical impedance parameters that were evaluated included complex impedance, phase angle, imaginary (out of phase) conductivity and Cole–Cole plots with a corresponding equivalent circuit. Changes in the impedance properties due to the presence of biofilms were monitored and correlated through microbiological, chemical and electrochemical assays. Impedance parameters associated with microbial activity correlated with biofilms on aluminum and glass surfaces. This technical approach provides impedance information about the biofilm without the signal traveling through the underlying conductive media or disrupting the biofilm. In this way, biological contributions to surface fouling can be evaluated with minimal contribution from the inorganic surface under the biofilm. In addition, this technique can be used to monitor biofilms on electrochemically inert surfaces as well as electrically conductive surfaces.

Graphic abstract

Study of an Antarctic thermophilic consortium and its influence on the electrochemical behavior of aluminum alloy 7075-T6

Common alloys used for the manufacture of aircrafts are subject to different forms of environmental deterioration. A major one is corrosion, and there is a strong body of evidence suggesting that environmental microorganisms initiate and accelerate it. The development of an appropriate strategy to reduce this process depends on the knowledge concerning the factors involved in corrosion. In this work, a biofilm forming bacterial consortium was extracted in situ from the corrosion products formed in an aircraft exposed to Antarctic media. Two thermophilic bacteria, an Anoxybacillus and a Staphylococcus strain, were successfully isolated from this consortium. Two extracellular enzymes previously speculated to participate in corrosion, catalase and peroxidase, were detected in the extracellular fraction of the consortium. Additionally, we assessed the individual contribution of those thermophilic microorganisms on the corrosion process of 7075-T6 aluminum alloy, which is widely used in aeronautical industry, through electrochemical methods and surface analysis techniques.

Profiling the microbial contamination in aviation fuel from an airport

Microbial contamination during fuel storage can cause fuel system fouling and corrosion. Characterizing microbial contamination is critical for preventing and solving these problems. In this study, culture-based combing with the culture-independent methods, were used to profile the microbial contamination in aviation fuel. High-throughput sequencing (HTS) modified by propidium monoazide (PMA) revealed a higher diversity of contaminating microorganisms in samples than the culture method. Proteobacteria (47%), Actinobacteria (21%) and Ascomycota (>99%, fungi) were the most abundant phyla, and the neglected archaea was also detected. Additionally, qPCR-based methods revealed all samples contained a heavy level of microbial contamination, which was more accurate than its culturable counterparts, and fungal contamination was still a problem in aviation fuel. The application of a PCR-based method gives deeper insight into microbial contamination in aviation fuel than the conventional culture method, thus using it for regular detection and accurate description of fuel contamination is strongly recommended in the case of explosive microbial growth.

Role of 2-mercaptopyridine on control of microbial influenced corrosion of copper CW024A metal in cooling water system

In this present study, the biocorrosion behaviour of Bacillus thuringiensis EN2 and B. oleronius EN9 on copper metal CW024A (Cu) in cooling water system (1% chloride) were evaluated using weight loss, electrochemical impedance spectroscopy (EIS) and surface analysis. In presence of EN2 and EN9, the corrosion rates (CR) were higher, about 0.021 mm/y and 0.032 mm/y than control system (0.004 mm/y). On the other hand, the presence of corrosion inhibitor 2-mercaptopyridine (2-MCP) with bacteria (EN2 and EN9), the biofilm on metal surface was highly inhibited and thus reduces the corrosion rate (CR: 0.004 mm/y). The electrochemical behaviour of CW024A metal was correlated with the adsorbed corrosion inhibitor film and biofilm. Atomic force microscopy (AFM) analysis revealed that the presence of EN2 and EN9 more pits was observed on the metal surface rather than 2-MCP system. EIS confirms the inhibitor act as cathodic type of inhibitor and thus leads to the inhibition of CR. Overall, this work concluded that corrosion inhibitor (2-MCP) inhibits, the bacterial biofilm formation on the metal surface due to the formation of productive layer on metal surface as coordination of NH bond. Which leads to the reduction of bacterial attachment and thus higher corrosion inhibition efficiency (75%) obtained. This is the first work disclosing the role of 2-MCP formulations as potent anti-bacterial and corrosion inhibition efficiency on copper metal in cooling water tower environment.

Characterization of the total and viable bacterial and fungal communities associated with the International Space Station surfaces

BACKGROUND

The International Space Station (ISS) is a closed system inhabited by microorganisms originating from life support systems, cargo, and crew that are exposed to unique selective pressures such as microgravity. To date, mandatory microbial monitoring and observational studies of spacecraft and space stations have been conducted by traditional culture methods, although it is known that many microbes cannot be cultured with standard techniques. To fully appreciate the true number and diversity of microbes that survive in the ISS, molecular and culture-based methods were used to assess microbial communities on ISS surfaces. Samples were taken at eight pre-defined locations during three flight missions spanning 14 months and analyzed upon return to Earth.

RESULTS

The cultivable bacterial and fungal population ranged from 104 to 109 CFU/m2 depending on location and consisted of various bacterial (Actinobacteria, Firmicutes, and Proteobacteria) and fungal (Ascomycota and Basidiomycota) phyla. Amplicon sequencing detected more bacterial phyla when compared to the culture-based analyses, but both methods identified similar numbers of fungal phyla. Changes in bacterial and fungal load (by culture and qPCR) were observed over time but not across locations. Bacterial community composition changed over time, but not across locations, while fungal community remained the same between samplings and locations. There were no significant differences in community composition and richness after propidium monoazide sample treatment, suggesting that the analyzed DNA was extracted from intact/viable organisms. Moreover, approximately 46% of intact/viable bacteria and 40% of intact/viable fungi could be cultured.

CONCLUSIONS

The results reveal a diverse population of bacteria and fungi on ISS environmental surfaces that changed over time but remained similar between locations. The dominant organisms are associated with the human microbiome and may include opportunistic pathogens. This study provides the first comprehensive catalog of both total and intact/viable bacteria and fungi found on surfaces in closed space systems and can be used to help develop safety measures that meet NASA requirements for deep space human habitation. The results of this study can have significant impact on our understanding of other confined built environments on the Earth such as clean rooms used in the pharmaceutical and medical industries.

Characterization, phylogenetic distribution and evolutionary trajectories of diverse hydrocarbon degrading microorganisms isolated from refinery sludge

Phylogenic association between bacteria living under harsh conditions can provide important information on adaptive mechanism, survival strategy and their potential application. Indigenous microorganisms isolated from toxic refinery oily sludge with ability to degrade a diverse range of hydrocarbons were identified and characterized. The strains including Pseudomonas aeruginosa RS1, Microbacterium sp. RS2, Bacillus sp. RS3, Acinetobacter baumannii RS4 and Stenotrophomonas sp. RS5 could utilize n-alkanes, cycloalkanes, polynuclear aromatic hydrocarbons (PAHs) with 2-4 rings and also substituted PAHs as sole substrate. The phylogenetic position of Bacillus sp. RS3 and Pseudomonas sp. RS1 was tested by applying the maximum likelihood (ML) method to the aligned 16S rRNA nucleotide sequences of PAH and aliphatic hydrocarbon degrading strains belonging to the corresponding genus. The base substitution matrix created with each set of organisms capable of degrading aromatic and aliphatic hydrocarbons showed significant transitional event with high values of transition: transversion ratio (R) under all conditions. The guanine-cytosine (GC) content of the hydrocarbon degrading test strains was also found to be highest for the clade which harbored them. The test strains consistently occupied a distinct terminal end within the phylogenetic tree constructed by ML analysis. This study reveals that the refinery sludge imposed environmental stress on the bacterial strains which possibly caused significant genetic alteration and phenotypic adaptation. Due to the divergent evolution of the Pseudomonas and Bacillus strains in the sludge, they appeared distinctly different from other hydrocarbon degrading strains of the same genus.

Control of corrosive bacterial community by bronopol in industrial water system

ABSTRACT

Ten aerobic corrosive bacterial strains were isolated from a cooling tower water system (CWS) which were identified based on the biochemical characterization and 16S rRNA gene sequencing. Out of them, dominant corrosion-causing bacteria, namely, Bacillus thuringiensis EN2, Terribacillus aidingensis EN3, and Bacillus oleronius EN9, were selected for biocorrosion studies on mild steel 1010 (MS) in a CWS. The biocorrosion behaviour of EN2, EN3, and EN9 strains was studied using immersion test (weight loss method), electrochemical analysis, and surface analysis. To address the corrosion problems, an anti-corrosive study using a biocide, bronopol was also demonstrated. Scanning electron microscopy and Fourier-transform infrared spectroscopy analyses of the MS coupons with biofilm developed after exposure to CWS confirmed the accumulation of extracellular polymeric substances and revealed that biofilms was formed as microcolonies, which subsequently cause pitting corrosion. In contrast, the biocide system, no pitting type of corrosion, was observed and weight loss was reduced about 32 ± 2 mg over biotic system (286 ± 2 mg). FTIR results confirmed the adsorption of bronopol on the MS metal surface as protective layer (co-ordination of NH2-Fe3+) to prevent the biofilm formation and inhibit the corrosive chemical compounds and thus led to reduction of corrosion rate (10 ± 1 mm/year). Overall, the results from WL, EIS, SEM, XRD, and FTIR concluded that bronopol was identified as effective biocide and corrosion inhibitor which controls the both chemical and biocorrosion of MS in CWS.

GRAPHICAL ABSTRACT

Ginger extract as green biocide to control microbial corrosion of mild steel

In latest years, various techniques and chemicals have been used for the control of microbial influenced corrosion (MIC) of metals. The application of botanical-based biocides is one of the effective and practical techniques in the fight against MIC. In the present study, the role of aqueous extract of ginger (Zingiber officinale) (GIE) as green biocide to control MIC of mild steel 1010 (MS) in a cooling water system was investigated. Biocorrosion behavior of Bacillus thuringiensis EN2 on MS and its control by GIE was analyzed by electrochemical measurements. Polarization, electrochemical studies (ES), weight loss measurements (WL), and surface analysis (XRD, X-ray diffraction spectroscopy, and FTIR, Fourier transform infra-red spectroscopy) were performed under various incubation periods up to 4 weeks. We observed that EN2 forms a thick biofilm on the MS metal surface at the end of the incubation period and the WL significantly increased to 993 mg at fourth week when compared to the initial immersion period (194 ± 2 mg). In contrast, with addition of GIE, WL was reduced about 41 ± 2 mg over biotic system (993 ± 2 mg). GC-MS analysis confirmed the adsorption of active component of GIE (β-turmerone) on the metal surface as a protective layer to prevent the biofilm formation and thus leads to reduction of corrosion. The optimum 20 ppm of GIE was found to be effective corrosion inhibition efficiency which was about 80%. From the results of WL, ES, XRD, FTIR, and GC-MS, GIE was identified as biocide and thus inhibits the bacterial growth on MS metal surface and it leads to control MIC. XRD showed that the GIE with EN2 resulted in less formation of corrosion products over biotic and abiotic systems. Overall, this research first shed light on the antibacterial activity of GIE inhibiting biofilm formation, thus reducing the corrosion of MS in cooling water systems.

Enzyme-mediated biodegradation of long-chain n-alkanes (C32 and C40) by thermophilic bacteria

Removal of long-chain hydrocarbons and n-alkanes from oil-contaminated environments are mere important to reduce the ecological damages, while bio-augmentation is a very promising technology that requires highly efficient microbes. In present study, the efficiency of pure isolates, i.e., Geobacillus thermoparaffinivorans IR2, Geobacillus stearothermophillus IR4 and Bacillus licheniformis MN6 and mixed consortium on degradation of long-chain n-alkanes C₃₂ and C₄₀ was investigated by batch cultivation test. Biodegradation efficiencies were found high for C₃₂ by mixed consortium (90%) than pure strains, while the pure strains were better in degradation of C₄₀ than mixed consortium (87%). In contrast, the maximum alkane hydroxylase activities (161 µmol mg^-1 protein) were recorded in mixed consortium system that had supplied with C₄₀ as sole carbon source. Also, the alcohol dehydrogenase (71 µmol mg^-1 protein) and lipase activity (57 µmol mg^-1 protein) were found high. Along with the enzyme activities, the hydrophobicity natures of the bacterial strains were found to determine the degradation efficiency of the hydrocarbons. Thus, the study suggested that the hydrophobicity of the bacteria is a critical parameter to understand the biodegradation of n-alkanes.

Probing the corrosion inhibiting role of a thermophilic Bacillus licheniformis biofilm on steel in a saline axenic culture

The adhesion of denseBacillus licheniformis(thermophilic strain) biofilm on stainless steel has been found to inhibit corrosion in saline medium up to 90% inhibition efficiency for double the concentration of bacterial cells after 3 weeks.

Comparative analysis of biofilm formation by Bacillus cereus reference strains and undomesticated food isolates and the effect of free iron

Biofilm formation of Bacillus cereus reference strains ATCC 14579 and ATCC 10987 and 21 undomesticated food isolates was studied on polystyrene and stainless steel as contact surfaces. For all strains, the biofilm forming capacity was significantly enhanced when in contact with stainless steel (SS) as a surface as compared to polystyrene (PS). For a selection of strains, the total CFU and spore counts in biofilms were determined and showed a good correlation between CFU counts and total biomass of these biofilms. Sporulation was favoured in the biofilm over the planktonic state. To substantiate whether iron availability could affect B. cereus biofilm formation, the free iron availability was varied in BHI by either the addition of FeCl3 or by depletion of iron with the scavenger 2,2-Bipyridine. Addition of iron resulted in increased air-liquid interface biofilm on polystyrene but not on SS for strain ATCC 10987, while the presence of Bipyridine reduced biofilm formation for both materials. Biofilm formation was restored when excess FeCl3 was added in combination with the scavenger. Further validation of the iron effect for all 23 strains in microtiter plate showed that fourteen strains (including ATCC10987) formed a biofilm on PS. For eight of these strains biofilm formation was enhanced in the presence of added iron and for eleven strains it was reduced when free iron was scavenged. Our results show that stainless steel as a contact material provides more favourable conditions for B. cereus biofilm formation and maturation compared to polystyrene. This effect could possibly be linked to iron availability as we show that free iron availability affects B. cereus biofilm formation.

Characterization of Corrosive Bacterial Consortia Isolated from Water in a Cooling Tower

An analysis of a culturable corrosive bacterial community in water samples from a cooling tower was performed using traditional cultivation techniques and its identification based on 16S rRNA gene sequence. Seven aerobic bacterial species were identified: Pseudomonas putida ARTYP1, Pseudomonas aeruginosa ARTYP2, Massilia timonae ARTYP3, Massilia albidiflava ARTYP4, Pseudomonas mosselii ARTYP5, Massilia sp. ARTYP6, and Pseudomonas sp. ARTYP7. Although some of these species have commonly been observed and reported in biocorrosion studies, the genus Massilia is identified for the first time in water from a cooling tower. The biocorrosion behaviour of copper metal by the new species Massilia timonae ARTYP3 was selected for further investigation using a weight loss method, as well as electrochemical and surface analysis techniques (SEM, AFM, and FTIR). In contrast with an uninoculated system, thin bacterial biofilms and pitting corrosion were observed on the copper metal surface in the presence of M. timonae. The use of a biocide, bronopol, inhibited the formation of biofilm and pitting corrosion on the copper metal surface.

Bacteria attachment to surfaces--AFM force spectroscopy and physicochemical analyses

Understanding bacterial adhesion to surfaces requires knowledge of the forces that govern bacterial-surface interactions. Biofilm formation on stainless steel 316 (SS316) by three bacterial species was investigated by examining surface force interaction between the cells and metal surface using atomic force microscopy (AFM). Bacterial-metal adhesion force was quantified at different surface delay time from 0 to 60s using AFM tip coated with three different bacterial species: Gram-negative Massilia timonae and Pseudomonas aeruginosa, and Gram-positive Bacillus subtilis. The results revealed that bacterial adhesion forces on SS316 surface by Gram-negative bacteria is higher (8.53±1.40 nN and 7.88±0.94 nN) when compared to Gram-positive bacteria (1.44±0.21 nN). Physicochemical analysis on bacterial surface properties also revealed that M. timonae and P. aeruginosa showed higher hydrophobicity and surface charges than B. subtilis along with the capability of producing extracellular polymeric substances (EPS). The higher hydrophobicity, surface charges, and greater propensity to form EPS by M. timonae and P. aeruginosa led to high adhesive force on the metal surface.