Nitric oxide-releasing fumed silica particles: synthesis, characterization, and biomedical application

Delivery of Nitric Oxide by Chondroitin Sulfate C Increases the Rate of Wound Healing through Immune Modulation

Chronic wounds impact 2.5% of the United States population and will continue to be a major clinical challenge due to increases in population age, chronic disease diagnoses, and antibiotic-resistant infection. Nitric oxide (NO) is an endogenous signaling molecule that represents an attractive, simple therapeutic for chronic wound treatment due to its innate antibacterial and immunomodulatory function. Unfortunately, modulating inflammation for extended periods by low levels of NO is not possible with NO gas. Herein, we report the utility of a NO-releasing glycosaminoglycan biopolymer (GAG) for promoting wound healing. GAGs are naturally occurring biopolymers that are immunomodulatory and known to be involved in the native wound healing process. Thus, the combination of NO and GAG biopolymers represents an attractive wound therapeutic due to these known independent roles. The influence and contribution of chondroitin sulfate C (CSC) modified to facilitate controlled and targeted delivery of NO (CSC-HEDA/NO) was evaluated using in vitro cell proliferation and migration assays and an in vivo wound model.

Anti-Inflammatory Effect of Fermented Cabbage Extract Containing Nitric Oxide Metabolites with Silica

The aim of this study was to evaluate the anti-inflammatory effect of fermented cabbage extract (FC) containing nitric oxide metabolites with silica (FCS) on 1-fluoro-2,4-dinitrofluorobenzene (DNFB)-induced atopic dermatitis (AD) in BALB/c mice. Atopic dermatitis-like allergic contact dermatitis was induced by DNFB challenge in the ear after DNFB sensitization on the dorsal skin of mice. FCS alleviated the severity of atopic dermatitis-like skin lesions. In addition, epidermis thickness of the ear and penetration of inflammatory cells in atopic dermatitis-like skin lesions were decreased after topical application of FCS. The serum levels of TNF-α and IL-4 were measured in atopic dermatitis mice using ELISA kits, which were observed to be significantly decreased after topical application of FCS. This study demonstrates that the FCS can be used as a potential therapeutic for the treatment and prevention of AD.

Advances in Nitric Oxide-Releasing Hydrogels for Biomedical Applications

Hydrogels provide a plethora of advantages to biomedical treatments due to their highly hydrophilic nature and tissue-like mechanical properties. Additionally, the numerous and widespread endogenous roles of nitric oxide have led to an eruption in research developing biomimetic solutions to the many challenges the biomedical world faces. Though many design factors and fabrication details must be considered, utilizing hydrogels as nitric oxide delivery vehicles provides promising materials in several applications. Such applications include cardiovascular therapy, vasodilation and angiogenesis, antimicrobial treatments, wound dressings, and stem cell research. Herein, a recent update on the progress of NO-releasing hydrogels is presented in depth. In addition, considerations for the design and fabrication of hydrogels and specific biomedical applications of nitric oxide-releasing hydrogels are discussed.

Targeting and arginine-driven synergizing photodynamic therapy with nutritional immunotherapy nanosystems for combating MRSA biofilms

The resistance and immune escape of methicillin-resistant Staphylococcus aureus (MRSA) biofilms cause recalcitrant infections. Here, we design a targeting and synergizing cascade PDT with nutritional immunotherapy nanosystems (Arg-PCN@Gel) containing PCN-224 as PDT platform for providing reactive oxygen species (ROS), incorporating arginine (Arg) as nitric oxide (NO) donor to cascade with ROS to produce more lethal ONOO- and promote immune response, and coating with gelatin as targeting agent and persistent Arg provider. The nanosystems adhered to the autolysin of MRSA and inhibited Arg metabolism by down-regulating icdA and icaA. It suppressed polysaccharide intercellular adhesin and extracellular DNA synthesis to prevent biofilm formation. The NO broke mature biofilms and helped ROS and ONOO- penetrate into biofilms to inactivate internal MRSA. Arg-PCN@Gel drove Arg to enhance immunity via inducible NO synthase/NO axis and arginase/polyamine axis and achieve efficient target treatment in MRSA biofilm infections. The targeting and cascading PDT synergized with nutritional immunotherapy provide an effective promising strategy for biofilm-associated infections.

A multifunctional nanocomposite coated with a BSA membrane for cascaded nitric oxide therapy

Gas therapy based on nitric oxide (NO) has emerged as a potential therapeutic approach for cancer, and in conjunction with multi-mode combination therapy, offers new possibilities for achieving significant hyperadditive effects. In this study, an integrated AI-MPDA@BSA nanocomposite for diagnosis and treatment was constructed for PDA based photoacoustic imaging (PAI) and cascade NO release. Natural NO donor L-arginine (L-Arg) and photosensitizer (PS) IR780 were loaded into mesoporous polydopamine (MPDA). Bovine serum albumin (BSA) was conjugated to the MPDA to increase the dispersibility and biocompatibility of the nanoparticles, as well as to serve as a gatekeeper controlling IR780 release from the MPDA pores. The AI-MPDA@BSA produced singlet oxygen (¹O₂) and converted it into NO through a chain reaction based on L-Arg, enabling a combination of photodynamic therapy and gas therapy. Moreover, due to the photothermal properties of MPDA, the AI-MPDA@BSA performed good photothermal conversion, which allowed photoacoustic imaging. As expected, both in vitro and in vivo studies have confirmed that the AI-MPDA@BSA nanoplatform has a significant inhibitory effect on cancer cells and tumors, and no apparent systemic toxicity or side effects were detected during the treatment period.

Opportunities for Nitric Oxide in Potentiating Cancer Immunotherapy

Despite nearly 30 years of development and recent highlights of nitric oxide (NO) donors and NO delivery systems in anticancer therapy, the limited understanding of exogenous NO's effects on the immune system has prevented their advancement into clinical use. In particular, the effects of exogenously delivered NO differing from that of endogenous NO has obscured how the potential and functions of NO in anticancer therapy may be estimated and exploited despite the accumulating evidence of NO's cancer therapy-potentiating effects on the immune system. After introducing their fundamentals and characteristics, this review discusses the current mechanistic understanding of NO donors and delivery systems in modulating the immunogenicity of cancer cells as well as the differentiation and functions of innate and adaptive immune cells. Lastly, the potential for the complex modulatory effects of NO with the immune system to be leveraged for therapeutic applications is discussed in the context of recent advancements in the implementation of NO delivery systems for anticancer immunotherapy applications. SIGNIFICANCE STATEMENT: Despite a 30-year history and recent highlights of nitric oxide (NO) donors and delivery systems as anticancer therapeutics, their clinical translation has been limited. Increasing evidence of the complex interactions between NO and the immune system has revealed both the potential and hurdles in their clinical translation. This review summarizes the effects of exogenous NO on cancer and immune cells in vitro and elaborates these effects in the context of recent reports exploiting NO delivery systems in vivo in cancer therapy applications.

Electrochemical Generation of Nitric Oxide for Medical Applications

Over the past 30 years, the significance of nitric oxide (NO) has become increasingly apparent in mammalian physiology. It is biosynthesized by three isoforms of nitric oxide synthases (NOS): neuronal (nNOS), endothelial (eNOS), and inducible (iNOS). Neuronal and eNOS both produce low levels of NO (nM) as a signaling agent and vasodilator, respectively. Inducible (iNOS) is present in activated macrophages at sites of infection to generate acutely toxic (μM) levels of NO as part of the mammalian immune defense mechanism. These discoveries have led to numerous animal and clinical studies to evaluate the potential therapeutic utility of NO in various medical operations/treatments, primarily using NO gas (via gas-cylinders) as the NO source. In this review, we focus specifically on recent advances in the electrochemical generation of NO (E-NOgen) as an alternative means to generate NO from cheap and inert sources, and the fabrication and testing of biomedical devices that utilize E-NOgen to controllably generate NO for medical applications.

Nitric oxide boosters as defensive agents against COVID-19 infection: an opinion

In the prevailing covid times, scientific community is busy in developing vaccine against COVID-19. Under such fascination this article describes the possible role of nitric oxide (NO) releasers in aiding the immune system of a human body against this dreadful pandemic disease. Despite some prodrug antiviral compounds are in practice to recover the patients suffering from covid-19, however, co-morbidity deaths are highest among the total deaths happened so far. This concurrence of a number of diseases in a patient along with this viral infection is indicative of the poor immunity. Literature background supports the use of NO as immunity boosting agent and hence, the nitric oxide releasing compounds could act as lucrative in this context. Some dietary suggestions of NO-containing food items have also been introduced in this article. Also, the profound effect of NO in relieving symptomatic severity of covid-19 has been opined in this work.Communicated by Ramaswamy H. Sarma.

Stearic acid modified nano CuMOFs used as a nitric oxide carrier for prolonged nitric oxide release

Nitric oxide (NO) shows high potential in the cardiovascular system with anticoagulant and antibacterial efficacy. Cu based metal organic frameworks with amino modification (CuMOFs) were found to have an extraordinary high NO loading, but at the expense of framework stability in ambient moisture. Nano CuMOFs was synthesized by hydrothermal method in this work, and treated with stearic acid (SA) creating a hydrophobic form. It was found that the structure of the particles was not affected after treatment with SA, and the treated CuMOFs had tunable hydrophobicity. Both CuMOFs and SA modified CuMOFs adsorbed NO with the reaction of the amino group and NO to form a NONOate. SA modification enhanced stability of the CuMOFs in phosphate buffer solution (PBS, pH = 7.4), slowed down the interaction between the NO loading unit and H₂O, and thus NO releasing was prolonged. The resulting NO-loaded CuMOFs inhibited platelet activation dramatically, prolonged the coagulation time and displayed excellent antibacterial properties. They could be envisioned as a good candidate for application in blood contacting implants.

Nitric oxide (NO) shows high potential in the cardiovascular system with anticoagulant and antibacterial efficacy.

The biofilm inhibition activity of a NO donor nanosilica with enhanced antibiotics action

Nitric oxide (NO) has emerged as a promising antibacterial agent, where NO donor compounds have been explored. Here, we investigated the role of a silica nanoparticle containing nitroprusside (MPSi-NP) as a NO donor agent against methicillin-sensitive (ATCC 25,923 and ATCC 12228) and methicillin-resistant (ATCC 700,698 and ATCC 35984) Staphylococcus strains. Biofilm inhibition was studied along with antibiotic activity in combination with standard antibiotics (ampicillin and tetracycline). MPSi-NP exhibited thermal release of 63% of NO within 24 h, while free nitroprusside released only 18% during a dialysis assay, indicating an assisted release of NO mediated by the nanoparticles. This nanomaterial showed only a moderate activity in blocking biofilm production, but exhibited a significant decrease in the number of viable bacterial cells (over 600-fold for Staphylococcus aureus ATCC 700,698 and Staphylococcus epidermidis ATCC 35984). Remarkably, even using MPSi-NP at concentrations below any antibacterial action, its combination with ampicillin promoted a significant decrease in MIC for resistant strains of S. aureus ATCC 700,698 (2-fold) and S. epidermidis ATCC 35,984 (4-fold). A carbopol-based gel formulation with MPSi-NP (0.5% w/w) was prepared and showed a zone of inhibition of 7.7 ± 0.6 mm for S. epidermidis ATCC 35984. Topical use of MPSi-NP in combination with antibiotics might be a manageable strategy to prevent and eventually treat complicated resistant bacterial infections.

Anti-thrombogenic Surface Coatings for Extracorporeal Membrane Oxygenation: A Narrative Review

Extracorporeal membrane oxygenation (ECMO) is used in critical care to manage patients with severe respiratory and cardiac failure. ECMO brings blood from a critically ill patient into contact with a non-endothelialized circuit which can cause clotting and bleeding simultaneously in this population. Continuous systemic anticoagulation is needed during ECMO. The membrane oxygenator, which is a critical component of the extracorporeal circuit, is prone to significant thrombus formation due to its large surface area and areas of low, turbulent, and stagnant flow. Various surface coatings, including but not limited to heparin, albumin, poly(ethylene glycol), phosphorylcholine, and poly(2-methoxyethyl acrylate), have been developed to reduce thrombus formation during ECMO. The present work provides an up-to-date overview of anti-thrombogenic surface coatings for ECMO, including both commercial coatings and those under development. The focus is placed on the coatings being developed for oxygenators. Overall, zwitterionic polymer coatings, nitric oxide (NO)-releasing coatings, and lubricant-infused coatings have attracted more attention than other coatings and showed some improvement in in vitro and in vivo anti-thrombogenic effects. However, most studies lacked standard hemocompatibility assessment and comparison studies with current clinically used coatings, either heparin coatings or nonheparin coatings. Moreover, this review identifies that further investigation on the thrombo-resistance, stability and durability of coatings under rated flow conditions and the effects of coatings on the function of oxygenators (pressure drop and gas transfer) are needed. Therefore, extensive further development is required before these new coatings can be used in the clinic.

Nitric Oxide Releasing Delivery Platforms: Design, Detection, Biomedical Applications, and Future Possibilities

Gasotransmitters belong to the subfamily of endogenous gaseous signaling molecules, which find a wide range of biomedical applications. Among the various gasotransmitters, nitric oxide (NO) has an enormous effect on the cardiovascular system. Apart from this, NO showed a pivotal role in neurological, respiratory, and immunological systems. Moreover, the paradoxical concentration-dependent activities make this gaseous signaling molecule more interesting. The gaseous NO has negligible stability in physiological conditions (37 °C, pH 7.4), which restricts their potential therapeutic applications. To overcome this issue, various NO delivering carriers were reported so far. Unfortunately, most of these NO donors have low stability, short half-life, or low NO payload. Herein, we review the synthesis of NO delivering motifs, development of macromolecular NO donors, their advantages/disadvantages, and biological applications. Various NO detection analytical techniques are discussed briefly, and finally, a viewpoint about the design of polymeric NO donors with improved physicochemical characteristics is predicted.

Recent advances in the development of nitric oxide-releasing biomaterials and their application potentials in chronic wound healing

Chronic wounds, such as pressure ulcers, vascular ulcers and diabetic foot ulcers (DFUs), often stay in a state of pathological inflammation and suffer from persistent infection, excess inflammation, and hypoxia, thus they are difficult to be healed. Nitric oxide (NO) plays a critical role in the regulation of various wound healing processes, including inflammatory response, cell proliferation, collagen formation, antimicrobial action and angiogenesis. The important role of NO in wound healing attracts intensive research focus on NO-based wound healing therapy. However, the application of NO gas therapy needs to resolve the intrinsic shortcomings of gas therapy, such as short storage and release times as well as temporal and spatial uncontrollability of the release mode. So far, various types of NO donors, including organic nitrates (RONO2), nitrites (RONO), S-nitrosothiols (RSNOs), nitrosamines, N-diazeniumdiolates (NONOates), and metal-NO complexes, have been developed to solidify gaseous NO and they were further encapsulated in or conjugated onto a variety of biomaterial vectors to develop NO delivery systems. NO synthetic enzyme mimics to catalyze the production and release of NO from l-arginine have also been developed. This paper reviews recent advances of NO donors, biomaterial vectors, thus-formed NO delivery systems, as well as recently emerged NO synthetic enzyme mimics. Furthermore, this review also summarizes the functions of NO releasing biomaterials that would benefit chronic wound healing, including antibacterial properties and the promotion of angiogenesis, as well as the convenient combination of light/thermal induced NO release with light/thermal therapies, and the prospects for future developing trends in this area.

Challenges and strategies for in situ endothelialization and long-term lumen patency of vascular grafts

Vascular diseases are the most prevalent cause of ischemic necrosis of tissue and organ, which even result in dysfunction and death. Vascular regeneration or artificial vascular graft, as the conventional treatment modality, has received keen attentions. However, small-diameter (diameter < 4 mm) vascular grafts have a high risk of thrombosis and intimal hyperplasia (IH), which makes long-term lumen patency challengeable. Endothelial cells (ECs) form the inner endothelium layer, and are crucial for anti-coagulation and thrombogenesis. Thus, promoting in situ endothelialization in vascular graft remodeling takes top priority, which requires recruitment of endothelia progenitor cells (EPCs), migration, adhesion, proliferation and activation of EPCs and ECs. Chemotaxis aimed at ligands on EPC surface can be utilized for EPC homing, while nanofibrous structure, biocompatible surface and cell-capturing molecules on graft surface can be applied for cell adhesion. Moreover, cell orientation can be regulated by topography of scaffold, and cell bioactivity can be modulated by growth factors and therapeutic genes. Additionally, surface modification can also reduce thrombogenesis, and some drug release can inhibit IH. Considering the influence of macrophages on ECs and smooth muscle cells (SMCs), scaffolds loaded with drugs that can promote M2 polarization are alternative strategies. In conclusion, the advanced strategies for enhanced long-term lumen patency of vascular grafts are summarized in this review. Strategies for recruitment of EPCs, adhesion, proliferation and activation of EPCs and ECs, anti-thrombogenesis, anti-IH, and immunomodulation are discussed. Ideal vascular grafts with appropriate surface modification, loading and fabrication strategies are required in further studies.

Nitric oxide releasing halloysite nanotubes for biomedical applications

Halloysite nanotubes (HNTs) are natural aluminosilicate clay that have been extensivelyexplored fordelivery of bioactive agents in biomedical applications because of their desirable features including unique hollow tubular structure, good biocompatibility, high mechanical strength, and extensive functionality. For the first time, in this work, functionalized HNTs are developed as a delivery platform for nitric oxide (NO), a gaseous molecule, known for its important roles in the regulation of various physiological processes. HNTs were first hydroxylated and modified with an aminosilane crosslinker, (3-aminopropyl) trimethoxysilane (APTMS), to enable the covalent attachment of a NO donor precursor, N-acetyl-d-penicillamine (NAP). HNT-NAP particles were then converted to NO-releasing S-nitroso-N-acetyl-penicillamine HNT-SNAP by nitrosation. The total NO loading on the resulting nanotubes was 0.10 ± 0.07 μmol/mg which could be released using different stimuli such as heat and light. Qualitative (Fourier-transform infrared spectroscopy and Nuclear magnetic resonance) and quantitative (Ninhydrin and Ellman) analyses were performed to confirm successful functionalization of HNTs at each step. Field emission scanning electron microscopy (FE-SEM) showed that the hollow tubular morphology of the HNTs was preserved after modification. HNT-SNAP showed concentration-dependent antibacterial effects against Gram-positive Staphylococcus aureus (S. aureus), resulting in up to 99.6% killing efficiency at a concentration of 10 mg/mL as compared to the control. Moreover, no significant cytotoxicity toward 3T3 mouse fibroblast cells was observed at concentrations equal or below 2 mg/mL of HNT-SNAP according to a WST-8-based cytotoxicity assay. The SNAP-functionalized HNTs represent a novel and efficient NO delivery system that holds the potential to be used, either alone or in combination with polymers for different biomedical applications.

Probing sedimentation non-ideality of particulate systems using analytical centrifugation

Analytical centrifugation is a versatile technique for the quantitative characterization of colloidal systems including colloidal stability. The recent developments in data acquisition and evaluation allow the accurate determination of particle size, shape anisotropy and particle density. High precision analytical centrifugation is in particular suited for the study of particle interactions and concentration-dependent sedimentation coefficients. We present a holistic approach for the quantitative determination of sedimentation non-ideality via analytical centrifugation for polydisperse, plain and amino-functionalized silica particles spanning over one order of magnitude in particle size between 100 nm and 1200 nm. These systems typically behave as neutral hard spheres as predicted by auxiliary lattice Boltzmann simulations. The extent of electrostatic interactions and their impact on sedimentation non-ideality can be quantified by the repulsion range, which is the ratio of the Debye length and the average interparticle distance. Experimental access to the repulsion range is provided through conductivity measurements. With the experimental repulsion range at hand, we estimate the effect of polydispersity on concentration-dependent sedimentation properties through a combination of lattice Boltzmann and Brownian dynamics simulations. Finally, we determine the concentration-dependent sedimentation properties of charge-stabilized, fluorescently-labeled silica particles with a nominal particle size of 30 nm and reduced interparticle distance, hence an elevated repulsion range. Overall, our results demonstrate how the influence of hard-sphere type and electrostatic interactions can be quantified when probing sedimentation non-ideality of particulate systems using analytical centrifugation even for systems exhibiting moderate sample heterogeneity and complex interactions.

Nitric Oxide-Releasing Hyaluronic Acid as an Antibacterial Agent for Wound Therapy

Taking advantage of their respective wound-healing roles in physiology, the dual activity of hyaluronic acid (HA) and nitric oxide (NO) was combined to create a single-agent wound therapeutic. Carboxylic acid groups of HA (6 and 90 kDa) were chemically modified with a series of alkylamines via carbodiimide chemistry to provide secondary amines for subsequent N-diazeniumdiolate NO donor formation. The resulting NO-releasing HA derivatives stored 0.3-0.6 μmol NO mg-1 and displayed diverse release kinetics (5-75 min NO-release half-lives) under physiological conditions. The 6 kDa HA with terminal primary amines and intermediate release kinetics exhibited broad-spectrum bactericidal activity against common wound pathogens, including planktonic methicillin-resistant Staphylococcus aureus as well as planktonic and biofilm-based multidrug-resistant Pseudomonas aeruginosa. The treatment of infected murine wounds with NO-releasing HA facilitated more rapid wound closure and decreased the quantity of the P. aeruginosa genetic material in the remaining wound tissue. Hyaluronidase readily degraded the HA derivatives, indicating that NO donor modification did not prohibit endogenous biodegradation pathways.

Polymeric Nitric Oxide Delivery Nanoplatforms for Treating Cancer, Cardiovascular Diseases, and Infection

The shortened Abstract is as follows: Therapeutic gas nitric oxide (NO) has demonstrated the unique advances in biomedical applications due to its prominent role in regulating physiological/pathophysiological activities in terms of vasodilation, angiogenesis, chemosensitizing effect, and bactericidal effect. However, it is challenging to deliver NO, due to its short half-life (<5 s) and short diffusion distances (20-160 µm). To address these, various polymeric NO delivery nanoplatforms (PNODNPs) have been developed for cancer therapy, antimicrobial and cardiovascular therapeutics, because of the important advantages of polymeric delivery nanoplatforms in terms of controlled release of therapeutics and the extremely versatile nature. This reviews highlights the recent significant advances made in PNODNPs for NO storing and targeting delivery. The ideal and unique criteria that are required for PNODNPs for treating cancer, cardiovascular diseases and infection, respectively, are summarized. Hopefully, effective storage and targeted delivery of NO in a controlled manner using PNODNPs could pave the way for NO-sensitized synergistic therapy in clinical practice for treating the leading death-causing diseases.

Tidal Flow Perfusion for the Artificial Placenta: A Paradigm Shift

The modalities of vascular access for the extracorporeal artificial placenta (AP) have undergone many iterations over the past decade. We hypothesized that single lumen cannulation (SLC) of the jugular vein using tidal flow extracorporeal life (ECLS) support is a feasible alternative to venovenous (VV) umbilical-jugular cannulation and double lumen cannulation (DLC) and can maintain fetal circulation, stable hemodynamics, and adequate gas exchange for 24 hours. After in vitro evaluation of the tidal flow system, six preterm lambs at estimated gestational age 118-124 days (term 145 days) were delivered and underwent VV-ECLS. Three were supported using DLC and three with SLC utilizing tidal flow AP support. Hemodynamics, circuit flow, and gas exchange were monitored. Target fetal parameters were as follows: mean arterial pressure 40-60 mmHg, heart rate 140-240 beats per minute (bpm), SatO2% 60-80%, PaO2 25-50 mmHg, PaCO2 30-55 mmHg, oxygen delivery >5 ml O2/dl/kg/min, and circuit flow 100 ± 25 ml/kg/min. All animals survived 24 hours and maintained fetal circulation with stable hemodynamics and adequate gas exchange. Parameters of the tidal flow group were comparable with those of DLC. Single lumen jugular cannulation using tidal flow is a promising vascular access strategy for AP support. Successful miniaturization holds great potential for clinical translation to support extremely premature infants.

Theranostic Activity of Nitric Oxide-Releasing Carbon Quantum Dots

The synthesis and anticancer cell activity of nitric oxide (NO)-releasing carbon quantum dots (CQDs) are described as potential theranostics. A series of secondary amine-modified CQDs were prepared using a hydrothermal method to modify β-cyclodextrin with hydroxyl and primary amine terminal functional groups. Subsequent reaction of the CQDs with NO gas under alkaline conditions yielded N-diazeniumdiolate NO donor-modified CQDs with adjustable NO payloads (0.2-1.1 μmol/mg) and release kinetics (half-lives from 29 to 79 min) depending on the level of secondary amines and surface functional groups. The anticancer activity of the NO-releasing CQDs against Pa14c, A549, and SW480 cancer cell lines proved to be dependent on both NO payloads and surface functionalizations. Primary amine-modified CQDs with NO payloads ∼1.11 μmol/mg exhibited the greatest anticancer action. A fluorescence microscopy study demonstrated the utility of these NO-releasing CQDs as dual NO-releasing and bioimaging probes.

Nitric oxide as a therapeutic option for COVID-19 treatment: a concise perspective

Among several possible therapies applicable for treating COVID-19, nitric oxide therapy has also gained considerable interest. This article describes the same with mechanistic details.

Near-Infrared Light-Triggered Nitric-Oxide-Enhanced Photodynamic Therapy and Low-Temperature Photothermal Therapy for Biofilm Elimination

Photothermal treatment (PTT) involving a combination of therapeutic modalities recently emerged as an efficient alternative for combating biofilm. However, PTT-related local high temperature may destroy the surrounding healthy tissues. Herein, we present an all-in-one phototherapeutic nanoplatform consisting of l-arginine (l-Arg), indocyanine green (ICG), and mesoporous polydopamine (MPDA), namely, AI-MPDA, to eliminate the already-formed biofilm. The fabrication process included surface modification of MPDA with l-Arg and further adsorption of ICG via π-π stacking. Under near-infrared (NIR) exposure, AI-MPDA not only generated heat but also produced reactive oxygen species, causing a cascade catalysis of l-Arg to release nitric oxide (NO). Under NIR irradiation, biofilm elimination was attributed to the NO-enhanced photodynamic therapy and low-temperature PTT (≤45 °C). Notably, the NIR-triggered all-in-one strategy resulted in severe destruction of bacterial membranes. The phototherapeutic AI-MPDA also displayed good cytocompatibility. NIR-irradiated AI-MPDA nanoparticles not only prevented bacterial colonization but also realized a rapid recovery of infected wounds. More importantly, the all-in-one phototherapeutic platform displayed effective biofilm elimination with an efficiency of around 100% in a abscess formation model. Overall, this low-temperature phototherapeutic platform provides a reliable tool for combating already-formed biofilms in clinical applications.

Sustained Nitric Oxide-Providing Small Molecule and Precise Release Behavior Study for Glaucoma Treatment

Incidence ofglaucoma, a severe disease leading to irreversible loss of vision, is increasing with global aging populations. Lowering intraocular pressure (IOP) is the only proven treatment method for glaucoma. Nitric oxide (NO) is an emerging material targeting the conventional outflow pathway by relaxing the trabecular meshwork (TM). However, there is little understanding on the NO level effective in IOP lowering without toxicity. Here, we report a novel long-term NO-releasing polydiazeniumdiolate (NOP) that enables lowering IOP via the conventional outflow pathway. NOP is composed of carbon-bound polydiazeniumdiolate, a stable NO donor moiety. NO release was monitored with accurate parameters by real-time detection of gas and analysis of the accumulated release profile. Based on the NO release information, the selected safe level of NOP exhibited effective TM relaxation and a potential IOP lowering effect in vivo without side effects. This work provides new insights into nitric oxide release behavior that should be considered for glaucoma treatment.

Cysteine immobilisation on the polyethylene terephthalate surfaces and its effect on the haemocompatibility

Nitric oxide (NO) is an important signalling molecule involved in haemostasis. NO, present as endogenous S-nitrosothiols, is released by cysteine through a transnitrosation reaction. To exploit this mechanism, cysteine was immobilised onto the different carboxylated polyethylene terephthalate (PET) surfaces using 1-step EDC (1-ethyl-3-(3-dimethylaminopropyl) carbodiimide) crosslinking mechanism. Immobilised cysteine concentration and NO release were dependent on the surface carboxyl density. Stability studies showed that the immobilised cysteine concentration and NO release reduced within 6 h. Immobilisation of cysteine derivatives eliminated the possibility of formation of polycysteine and its electrostatic interaction with the carboxylated PET. The immobilised cysteine concentration did not recover after DTT treatment, eliminating the possibility of disulphide bond formation. Further, cysteine was immobilised using a 2-step EDC crosslinking mechanism. Although the cysteine concentration reduced during stability studies, it recovered upon DTT treatment, indicating that cysteine forms amide bonds with the carboxylated PET and the observed decrease in cysteine concentration is probably due to the formation of disulphide bonds. The haemocompatibility of the cysteine immobilised PET surfaces showed similar results compared to the carboxylated PET. The loss of thiol groups due to the disulphide bond restricts the transnitrosation reaction. Hence, these materials can be used primarily in short-term applications.

Temperature dependent 15N NMR study of nitric oxide

For the first time, ¹⁵N NMR data are obtained for a sample of nitric oxide at various temperatures. Spectra have been obtained in the liquid and solid state. In the former, the chemical shift as well as the spin-lattice relaxation time is characterized by the dynamic equilibrium of the dimerization reaction. Only the signal of the (NO)₂ dimer is observed, while the paramagnetic NO has strong influences on the NMR parameter. From T₁ relaxation and linewidth analysis a range for the correlation time of the exchange between monomer and dimer is obtained. SQUID measurements corroborate the NMR analysis.

Zinc-oxide nanoparticles act catalytically and synergistically with nitric oxide donors to enhance antimicrobial efficacy

The development of infection-resistant materials is of substantial importance as seen with an increase in antibiotic resistance. In this project, the nitric oxide (NO)-releasing polymer has an added topcoat of zinc oxide nanoparticle (ZnO-NP) to improve NO-release and match the endogenous NO flux (0.5-4 × 10-10 mol cm-2 min-1 ). The ZnO-NP is incorporated to act as a catalyst and provide the additional benefit of acting synergistically with NO as an antimicrobial agent. The ZnO-NP topcoat is applied on a polycarbonate-based polyurethane (CarboSil) that contains blended NO donor, S-nitroso-N-acetylpenicillamine (SNAP). This sample, SNAP-ZnO, continuously sustained NO release above 0.5 × 10-10 mol cm-2 min-1 for 14 days while samples containing only SNAP dropped below physiological levels within 24 h. The ZnO-NP topcoat improved NO release and reduced the amount of SNAP leached by 55% over a 7-day period. ICP-MS data observed negligible Zn ion release into the environment, suggesting longevity of the catalyst within the material. Compared to samples with no NO-release, the SNAP-ZnO films had a 99.03% killing efficacy against Staphylococcus aureus and 87.62% killing efficacy against Pseudomonas aeruginosa. A cell cytotoxicity study using mouse fibroblast 3T3 cells also noted no significant difference in viability between the controls and the SNAP-ZnO material, indicating no toxicity toward mammalian cells. The studies indicate that the synergy of combining a metal ion catalyst with a NO-releasing polymer significantly improved NO-release kinetics and antimicrobial activity for device coating applications. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 00A: 000-000, 2019.

Bovine serum albumin-templated nanoplatform for magnetic resonance imaging-guided chemodynamic therapy

BACKGROUND

Nanotechnology in medicine has greatly expanded the therapeutic strategy that may be explored for cancer treatment by exploiting the specific tumor microenvironment such as mild acidity, high glutathione (GSH) concentration and overproduced hydrogen peroxide (H2O2). Among them, tumor microenvironment responsive chemodynamic therapy (CDT) utilized the Fenton or Fenton-like reaction to produce excess hydroxyl radical (·OH) for the destruction of tumor cells. However, the produced ·OH is easily depleted by the excess GSH in tumors, which would undoubtedly impair the CDT's efficiency. To overcome this obstacle and enhance the treatment efficiency, we design the nanoplatforms for magnetic resonance imaging (MRI)-guided CDT.

RESULTS

In this study, we applied the bovine serum albumin (BSA)-templated CuS:Gd nanoparticles (CuS:Gd NPs) for MRI-guided CDT. The Cu2+ in the CuS:Gd NPs could be reduced to Cu+ by GSH in tumors, which further reacted with H2O2 and triggered Fenton-like reaction to simultaneously generate abundant ·OH and deplete GSH for tumor enhanced CDT. Besides, the Gd3+ in CuS:Gd NPs endowed them with excellent MRI capability, which could be used to locate the tumor site and monitor the therapy process preliminarily.

CONCLUSIONS

The designed nanoplatforms offer a major step forward in CDT for effective treatment of tumors guided by MRI.

Nanoscale Coordination Polymers for Synergistic NO and Chemodynamic Therapy of Liver Cancer

Nitric oxide (NO) induces a multitude of antitumor activities, encompassing the induction of apoptosis, sensitization to chemo-, radio-, or immune-therapy, and inhibition of metastasis, drug resistance, angiogenesis, and hypoxia, thus attracting much attention in the area of cancer intervention. To improve the precise targeting and treatment efficacy of NO, a glutathione (GSH)-sensitive NO donor (1,5-bis[(l-proline-1-yl)diazen-1-ium-1,2-diol- O²-yl]-2,4-dinitrobenzene, BPDB) coordinates with iron ions to form the nanoscale coordination polymer (NCP) via a simple precipitation and then partial ion exchange process. The obtained Fe(II)-BNCP shows desirable solubility, biocompatibility, and circulation stability. Quick NO release triggered by high concentrations of GSH in tumor cells improves the specificity of NO release in situ, thus avoiding side effects in other tissues. Meanwhile, under high concentrations of H₂O₂ in tumors, Fe²⁺ ions in BPDB-based NCP, named Fe(II)-BNCP, exert Fenton activity to generate hydroxyl radicals (·OH), which is the main contribution for chemodynamic therapy (CDT). In addition, ·O₂^- generated by the Haber-Weiss reaction of Fe²⁺ ions with H₂O₂ can quickly react with NO to produce peroxynitrite anion (ONOO^-) that is more cytotoxic than ·O₂^- or NO only. This synergistic NO-CDT effect has been proved to retard the tumor growth in Heps xenograft ICR mouse models. This work not only implements a synergistic effect of NO-CDT therapy but also offers a simple and efficient strategy to construct a coordination polymer nanomedicine via rationally designed prodrug molecules such as NO donors.

Nitric Oxide Release from Antimicrobial Peptide Hydrogels for Wound Healing

Nitric oxide (NO) is an endogenously produced molecule that has been implicated in several wound healing mechanisms. Its topical delivery may improve healing in acute or chronic wounds. In this study an antimicrobial peptide was synthesized which self-assembled upon a pH shift, forming a hydrogel. The peptide was chemically functionalized to incorporate a NO-donor moiety on lysine residues. The extent of the reaction was measured by ninhydrin assay and the NO release rate was quantified via the Griess reaction method. The resulting compound was evaluated for its antimicrobial activity against Escherichia coli, and its effect on collagen production by fibroblasts was assessed. Time-kill curves point to an initial increase in bactericidal activity of the functionalized peptide, and collagen production by human dermal fibroblasts when incubated with the NO-functionalized peptide showed a dose-dependent increase in the presence of the NO donor within a range of 0⁻20 μM.

Nitric Oxide-Releasing Cyclodextrins

A series of secondary amine-modified cyclodextrin (CD) derivatives was synthesized with diverse exterior terminal groups (i.e., hydroxyl, methyl, methoxyl, and primary amine). Subsequent reaction with nitric oxide (NO) gas under alkaline conditions yielded N-diazeniumdiolate-modified CD derivatives. Adjustable NO payloads (0.6-2.4 μmol/mg) and release half-lives (0.7-4.2 h) were achieved by regulating both the amount of secondary amine precursors and the functional groups around the NO donors. The bactericidal action of these NO-releasing cyclodextrin derivatives was evaluated against Pseudomonas aeruginosa, a Gram-negative pathogen, with antibacterial activity proving dependent on both the NO payload and exterior modification. Materials containing a high density of NO donors or primary amines exhibited the greatest ability to eradicate P. aeruginosa. Of the materials prepared, only the primary amine-terminated heptasubstituted CD derivatives exhibited toxicity against mammalian L929 mouse fibroblast cells. The NO donor-modified CD was also capable of delivering promethazine, a hydrophobic drug, thus demonstrating potential as a dual-drug-releasing therapeutic.

Nitric Oxide-Releasing Macromolecular Scaffolds for Antibacterial Applications

Exogenous nitric oxide (NO) represents an attractive antibacterial agent because of its ability to both disperse and directly kill bacterial biofilms while avoiding resistance. Due to the challenges associated with administering gaseous NO, NO-releasing macromolecular scaffolds are developed to facilitate NO delivery. This progress report describes the rational design and application of NO-releasing macromolecular scaffolds as antibacterial therapeutics. Special consideration is given to the role of the physicochemical properties of the NO storage vehicles on antibacterial or anti-biofilm activity.

Synthesis of Self-Assembled Porphyrin Nanoparticle Photosensitizers

The use of nanoparticles as a potential building block for photosensitizers has recently become a focus of interest in the field of photocatalysis and photodynamic therapy. Porphyrins and their derivatives are effective photosensitizers due to extended π-conjugated electronic structure, high molar absorption from visible to near-infrared spectrum, and high singlet oxygen quantum yields as well as chemical versatility. In this paper, we report a synthesis of self-assembled porphyrin nanoparticle photosensitizers using zinc meso-tetra(4-pyridyl)porphyrin (ZnTPyP) through a confined noncovalent self-assembly process. Scanning electron microscopy reveals formation of monodisperse cubic nanoparticles. UV-vis characterizations reveal that optical absorption of the nanoparticles exhibits a red shift due to noncovalent self-assembly of porphyrins, which not only effectively increase intensity of light absorption but also extend light absorption broadly covering visible light for enhanced photodynamic therapy. Electron spin-resonance spectroscopy (ESR) studies show the resultant porphyrin nanoparticles release a high yield of singlet oxygen. Nitric oxide (NO) coordinates to central metal Zn ions to form stabilized ZnTPyP@NO nanoparticles. We show that under light irradiation ZnTPyP@NO nanoparticles release highly reactive peroxynitrite molecules that exhibit enhanced antibacterial photodynamic therapy (APDT) activity. The ease of the synthesis of self-assembled porphyrin nanoparticles and light-triggered release of highly reactive moieties represent a completely different photosensitizer system for APDT application.

Recent advances in nitric oxide delivery for antimicrobial applications using polymer-based systems

The nitric oxide (NO) molecule has gained increasing attention in biological applications to combat biofilm-associated bacterial infections. However, limited NO loading, relatively short half-lives of low molecular weight NO donor compounds, and difficulties in targeted delivery of NO have hindered their practical clinical administration. To overcome these drawbacks, the combination of NO and scaffolds based on biocompatible polymers is an effective way towards realizing the practical utility of NO in biomedical applications. In this regard, the present overview highlights the recent developments in NO-releasing polymeric biomaterials for antimicrobial applications, focusing on antibiofilm treatments and the challenges that need to be overcome.

Functional Layer-by-Layer Thin Films of Inducible Nitric Oxide (NO) Synthase Oxygenase and Polyethylenimine: Modulation of Enzyme Loading and NO-Release Activity

Nitric oxide (NO) release counteracts platelet aggregation and prevents the thrombosis cascade in the inner walls of blood vessels. NO-release coatings also prevent thrombus formation on the surface of blood-contacting medical devices. Our previous work has shown that inducible nitric oxide synthase (iNOS) films release NO fluxes upon enzymatic conversion of the substrate l-arginine. In this work, we report on the modulation of enzyme loading in layer-by-layer (LbL) thin films of inducible nitric oxide synthase oxygenase (iNOSoxy) on polyethylenimine (PEI). The layer of iNOSoxy is electrostatically adsorbed onto the PEI layer. The pH of the iNOSoxy solution affects the amount of enzyme adsorbed. The overall negative surface charge of iNOSoxy in solution depends on the pH and hence determines the density of adsorbed protein on the positively charged PEI layer. We used buffered iNOSoxy solutions adjusted to pHs 8.6 and 7.0, while saline PEI solution was used at pH 7.0. Atomic force microscopy imaging of the outermost layer shows higher protein adsorption with iNOSoxy at pH 8.6 than with a solution of iNOSoxy at pH 7.0. Graphite electrodes with PEI/iNOSoxy films show higher catalytic currents for nitric oxide reduction mediated by iNOSoxy. The higher enzyme loading translates into higher NO flux when the enzyme-modified surface is exposed to a solution containing the substrate and a source of electrons. Spectrophotometric assays showed higher NO fluxes with iNOSoxy/PEI films built at pH 8.6 than with films built at pH 7.0. Fourier transform infrared analysis of iNOSoxy adsorbed on PEI at pH 8.6 and 7.0 shows structural differences of iNOSoxy in films, which explains the observed changes in enzymatic activity. Our findings show that pH provides a strategy to optimize the NOS loading and enzyme activity in NOS-based LbL thin films, which enables improved NO release with minimum layers of PEI/NOS.

Mesoporous Silica and Organosilica Nanoparticles: Physical Chemistry, Biosafety, Delivery Strategies, and Biomedical Applications

Predetermining the physico-chemical properties, biosafety, and stimuli-responsiveness of nanomaterials in biological environments is essential for safe and effective biomedical applications. At the forefront of biomedical research, mesoporous silica nanoparticles and mesoporous organosilica nanoparticles are increasingly investigated to predict their biological outcome by materials design. In this review, it is first chronicled that how the nanomaterial design of pure silica, partially hybridized organosilica, and fully hybridized organosilica (periodic mesoporous organosilicas) governs not only the physico-chemical properties but also the biosafety of the nanoparticles. The impact of the hybridization on the biocompatibility, protein corona, biodistribution, biodegradability, and clearance of the silica-based particles is described. Then, the influence of the surface engineering, the framework hybridization, as well as the morphology of the particles, on the ability to load and controllably deliver drugs under internal biological stimuli (e.g., pH, redox, enzymes) and external noninvasive stimuli (e.g., light, magnetic, ultrasound) are presented. To conclude, trends in the biomedical applications of silica and organosilica nanovectors are delineated, such as unconventional bioimaging techniques, large cargo delivery, combination therapy, gaseous molecule delivery, antimicrobial protection, and Alzheimer's disease therapy.

Biotemplated Synthesis and Characterization of Mesoporous Nitric Oxide-Releasing Diatomaceous Earth Silica Particles

Diatomaceous earth (DE), a nanoporous silica material composed of fossilized unicellular marine algae, possesses unique mechanical, molecular transport, optical, and photonic properties exploited across an array of biomedical applications. The utility of DE in these applications stands to be enhanced through the incorporation of nitric oxide (NO) technology shown to modulate essential physiological processes. In this work, the preparation and characterization of a biotemplated diatomaceous earth-based nitric oxide delivery scaffold are described for the first time. Three aminosilanes [(3-aminopropyl)triethoxysilane (APTES), N-(6-aminohexyl)aminomethyltriethoxysilane (AHAMTES), and 3-aminopropyldimethylethoxysilane (APDMES)] were evaluated for their ability to maximize NO loading via the covalent attachment of N-acetyl-d-penicillamine (NAP) to diatomaceous earth. The use of APTES cross-linker resulted in maximal NAP tethering to the DE surface, and NAP-DE was converted to NO-releasing S-nitroso-N-acetyl-penicillamine (SNAP)-DE by nitrosation. The total NO loading of SNAP-DE was determined by chemiluminescence to be 0.0372 ± 0.00791 μmol/mg. Retention of diatomaceous earth's unique mesoporous morphology throughout the derivatization was confirmed by scanning electron microscopy. SNAP-DE exhibited 92.95% killing efficiency against Gram-positive bacteria Staphylococcus aureus as compared to the control. The WST-8-based cytotoxicity testing showed no negative impact on mouse fibroblast cells, demonstrating the biocompatible potential of SNAP-DE. The development of NO releasing diatomaceous earth presents a unique means of delivering tunable levels of NO to materials across the fields of polymer chemistry, tissue engineering, drug delivery, and wound healing.

Structural heterogeneity in polymeric nitric oxide donor nanoblended coatings for controlled release behaviors

Controlled nitric oxide (NO) delivery based on the heterogeneity of polymeric coating structures for local NO treatment.

Synthesis, functionalization, and applications of metal–organic frameworks in biomedicine

Metal–organic frameworks (MOFs), also known as coordination polymers, have attracted extensive research interest in the past few decades due to their unique physical structures and potentially vast applications.

Controlling the Uptake and Regulating the Release of Nitric Oxide in Microporous Solids

Representative compounds from three classes of microporous solids, namely, metal-organic frameworks (MOFs), hybrid ultra-microporous materials (HUMs), and porous-organic polymers (POPs), were investigated for their nitric oxide gas uptake and release behavior. Low-pressure sorption studies indicated strong chemisorption of NO on the free amine groups decorating the MOF UiO-66-NH₂ when compared to its non-amine-functionalized parent. The HUMs demonstrated reversible physisorption within the low-pressure regime, but interestingly in one case there was evidence for chemisorption following pressurization with NO at 10 bar. Significant release of chemisorbed NO from the UiO-66-NH₂ and one of the HUMs was triggered by addition of acid to the medium, a pH change from 7.4 to 5.4 being sufficient to trigger NO release. An imidazole-based POP exhibited chemisorption of NO at high pressure wherein the ring basicity facilitated both NO uptake and spontaneous release upon contact with the aqueous release medium.

Nanoantibiotics: a new paradigm for the treatment of surgical infection

Infections following orthopedic device implantations often impose a substantial health burden and result in high medical costs. Currently, preventative methods are often employed following an orthopedic implant to reduce risk of infection; however, contamination of the surgical site can still occur. Although antibiotics have demonstrated a substantial reduction in bacterial growth and maintenance, biofilm formation around the implant can often minimize efficacy of the antibiotic. Recently, nanotechnology has garnered significant interest, resulting in the development of several antibiotic delivery strategies that exhibit extended release and increased efficacy. In this review, treatment methods of orthopedic-device-related infections will be discussed and an overview of antimicrobial-based nanotechnologies will be provided. Specifically, nonmetal-, metal- and oxide-based nanotechnologies, incorporating antibacterial strategies, will be discussed.

A two-photon excitable and ratiometric fluorogenic nitric oxide photoreleaser and its biological applications

We report a two-photon excitable nitric oxide photoreleaser with ratiometric fluorescence variation, its spatiotemporally controlled release and biological applications.

Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO)

Biomedical devices are essential for patient diagnosis and treatment; however, when blood comes in contact with foreign surfaces or homeostasis is disrupted, complications including thrombus formation and bacterial infections can interrupt device functionality, causing false readings and/or shorten device lifetime. Here, we review some of the current approaches for developing antithrombotic and antibacterial materials for biomedical applications. Special emphasis is given to materials that release or generate low levels of nitric oxide (NO). Nitric oxide is an endogenous gas molecule that can inhibit platelet activation as well as bacterial proliferation and adhesion. Various NO delivery vehicles have been developed to improve NO's therapeutic potential. In this review, we provide a summary of the NO releasing and NO generating polymeric materials developed to date, with a focus on the chemistry of different NO donors, the polymer preparation processes, and in vitro and in vivo applications of the two most promising types of NO donors studied thus far, N-diazeniumdiolates (NONOates) and S-nitrosothiols (RSNOs).

Light-Induced Acid Generation on a Gatekeeper for Smart Nitric Oxide Delivery

We report herein the design of a light-responsive gatekeeper for smart nitric oxide (NO) delivery. The gatekeeper is composed of a pH-jump reagent as an intermediary of stimulus and a calcium phosphate (CaP) coating as a shielding layer for NO release. The light irradiation and subsequent acid generation are used as triggers for uncapping the gatekeeper and releasing NO. The acids generated from a light-activated pH-jump agent loaded in the mesoporous nanoparticles accelerated the degradation of the CaP-coating layers on the nanoparticles, facilitating the light-responsive NO release from diazeniumdiolate by exposing a NO donor to physiological conditions. Using the combination of the pH-jump reagent and CaP coating, we successfully developed a light-responsive gatekeeper system for spatiotemporal-controlled NO delivery.

Co-delivery of nitric oxide and antibiotic using polymeric nanoparticles

The rise of hospital-acquired infections, also known as nosocomial infections, is a growing concern in intensive healthcare, causing the death of hundreds of thousands of patients and costing billions of dollars worldwide every year. In addition, a decrease in the effectiveness of antibiotics caused by the emergence of drug resistance in pathogens living in biofilm communities poses a significant threat to our health system. The development of new therapeutic agents is urgently needed to overcome this challenge. We have developed new dual action polymeric nanoparticles capable of storing nitric oxide, which can provoke dispersal of biofilms into an antibiotic susceptible planktonic form, together with the aminoglycoside gentamicin, capable of killing the bacteria. The novelty of this work lies in the attachment of NO-releasing moiety to an existing clinically used drug, gentamicin. The nanoparticles were found to release both agents simultaneously and demonstrated synergistic effects, reducing the viability of Pseudomonas aeruginosa biofilm and planktonic cultures by more than 90% and 95%, respectively, while treatments with antibiotic or nitric oxide alone resulted in less than 20% decrease in biofilm viability.

Functionalized Mesoporous Silica via an Aminosilane Surfactant Ion Exchange Reaction: Controlled Scaffold Design and Nitric Oxide Release

Nitric oxide-releasing mesoporous silica nanoparticles (MSNs) were prepared using an aminosilane-template surfactant ion exchange reaction. Initially, bare silica particles were synthesized under basic conditions in the presence of cetyltrimethylammonium bromide (CTAB). These particles were functionalized with nitric oxide (NO) donor precursors (i.e., secondary amines) via the addition of aminosilane directly to the particle sol and a commensurate ion exchange reaction between the cationic aminosilanes and CTAB. N-Diazeniumdiolate NO donors were formed at the secondary amines to yield NO-releasing MSNs. Tuning of the ion exchange-based MSN modification approach allowed for the preparation of monodisperse particles ranging from 30 to 1100 nm. Regardless of size, the MSNs stored appreciable levels of NO (0.4-1.5 μmol mg(-1)) with tunable NO release durations (1-33 h) dependent on the aminosilane modification. Independent control of NO release properties and particle size was achieved, demonstrating the flexibility of this novel MSN synthesis over conventional co-condensation and surface grafting strategies.

Managing bacterial biofilms with chitosan-based polymeric nitric oxides: Inactivation of biofilm bacteria and synergistic effects with antibiotics

In this study, we developed a new approach in the preparation of chitosan-based polymeric nitric oxides. Chitosan film (unreacted chitosan) reacted with glutaraldehyde to introduce aldehyde groups onto the material surface (glutaraldehyde-treated chitosan). Glutaraldehyde-treated chitosan reacted with a small-molecule nitric oxide donor, 3,3-bis(aminoethyl)-1-hydroxy-2-oxo-1-triazene, to covalently immobilize nitric oxide–releasing moieties onto the polymer (chitosan-based polymeric nitric oxide). Chitosan-based polymeric nitric oxide showed sustained release of nitric oxide. The activation energies and rate constants of nitric oxide release were determined. The released nitric oxide provided potent antimicrobial effects against Gram-positive and Gram-negative bacteria living in biofilms, and the chitosan-based polymeric nitric oxide film showed added/synergistic effects with common antibiotics. At 4°C, the chitosan-based polymeric nitric oxide could be stored for more than 1 month, without significantly losing nitric oxide–releasing capabilities. Furthermore, chitosan-based polymeric nitric oxide showed excellent biocompatibility with mammalian cells, pointing to great potentials of the new materials for a wide range of biomedical applications.