Cell-permeable near-infrared fluorogenic substrates for imaging beta-lactamase activity

Chemical sensors for the early diagnosis of bacterial resistance to β-lactam antibiotics

β-Lactamases are bacterial enzymes that inactivate β-lactam antibiotics and, as such, are the most prevalent cause of antibiotic resistance in Gram-negative bacteria. The ever-increasing production and worldwide dissemination of bacterial strains producing carbapenemases is currently a global health concern. These enzymes catalyze the hydrolysis of carbapenems - the β-lactam antibiotics with the broadest spectrum of activity that are often considered as drugs of last resort. The incidence of carbapenem-resistant pathogens such as Pseudomonas aeruginosa, Acinetobacter baumannii and carbapenemase or extended spectrum beta-lactamase (ESBL)-producing Enterobacterales, which are frequent in clinical settings, is worrisome since, in some cases, no therapies are available. These include all metallo-β-lactamases (VIM, IMP, NDM, SMP, and L1), and serine-carbapenemases of classes A (KPC, SME, IMI, and GES), and of classes D (OXA-23, OXA-24/40, OXA-48 and OXA-58). Consequently, the early diagnosis of bacterial strains harboring carbapenemases is a pivotal task in clinical microbiology in order to track antibiotic bacterial resistance and to improve the worldwide management of infectious diseases. Recent research efforts on the development of chromogenic and fluorescent chemical sensors for the specific and sensitive detection and quantification of β-lactamase production in multidrug-resistant pathogens are summarized herein. Studies to circumvent the main limitations of the phenotypic and molecular methods are discussed. Recently reported chromogenic and fluorogenic cephalosporin- and carbapenem-based β-lactamase substrates will be reviewed as alternative options to the currently available nitrocefin and related compounds, a chromogenic cephalosporin-based reagent widely used in clinical microbiology laboratories. The scope of these new chemical sensors, along with the synthetic approaches to synthesize them, is also summarized.

Enzymatic Activity Profiling Using an Ultrasensitive Array of Chemiluminescent Probes for Bacterial Classification and Characterization

Identification and characterization of bacterial species in clinical and industrial settings necessitate the use of diverse, labor-intensive, and time-consuming protocols as well as the utilization of expensive and high-maintenance equipment. Furthermore, while cutting-edge identification technologies such as mass spectrometry and PCR are highly effective in identifying bacterial pathogens, they fall short in providing additional information for identifying bacteria not present in the databases upon which these methods rely. In response to these challenges, we present a robust and general approach to bacterial identification based on their unique enzymatic activity profiles. This method delivers results within 90 min, utilizing an array of highly sensitive and enzyme-selective chemiluminescent probes. Leveraging our recently developed technology of chemiluminescent luminophores, which emit light under physiological conditions, we have crafted an array of probes designed to rapidly detect various bacterial enzymatic activities. The array includes probes for detecting resistance to the important and large class of β-lactam antibiotics. The analysis of chemiluminescent fingerprints from a diverse range of prominent bacterial pathogens unveiled distinct enzymatic activity profiles for each strain. The reported universally applicable identification procedure offers a highly sensitive and expeditious means to delineate bacterial enzymatic activity fingerprints. This opens new avenues for characterizing and identifying pathogens in research, clinical, and industrial applications.

Mapping enzyme activity in living systems by real-time mid-infrared photothermal imaging of nitrile chameleons

Simultaneous spatial mapping of the activity of multiple enzymes in a living system can elucidate their functions in health and disease. However, methods based on monitoring fluorescent substrates are limited. Here, we report the development of nitrile (C≡N)-tagged enzyme activity reporters, named nitrile chameleons, for the peak shift between substrate and product. To image these reporters in real time, we developed a laser-scanning mid-infrared photothermal imaging system capable of imaging the enzymatic substrates and products at a resolution of 300 nm. We show that when combined, these tools can map the activity distribution of different enzymes and measure their relative catalytic efficiency in living systems such as cancer cells, Caenorhabditis elegans, and brain tissues, and can be used to directly visualize caspase-phosphatase interactions during apoptosis. Our method is generally applicable to a broad category of enzymes and will enable new analyses of enzymes in their native context.

Augmenting Antimicrobial Resistance Surveillance: Rapid Detection of β-Lactamase-Expressing Drug-Resistant Bacteria through Sensitized Luminescence on a Paper-Supported Hydrogel

The emergence of antimicrobial resistance (AMR) in pathogenic bacteria, expedited by the overuse and misuse of antibiotics, necessitates the development of a rapid and pan-territorially accessible diagnostic protocol for resistant bacterial infections, which would not only enable judicious prescription of drugs, leading to infection control but also augment AMR surveillance. In this study, we introduce for the first time a "turn-on" terbium (Tb3+) photoluminescence assay supported on a paper-based platform for rapid point-of-care (POC) detection of β-lactamase (BL)-producing bacteria. We strategically conjugated biphenyl-4-carboxylic acid (BCA), a potent Tb3+ sensitizer, with cephalosporin to engineer a BL substrate CCS, where the energy transfer to terbium is arrested. However, BL, a major resistance element produced by bacteria resistant to β-lactam antibiotics, triggers a spontaneous release of BCA, empowering terbium sensitization within a supramolecular scaffold supported on paper. The remarkable optical response facilitates quick assessment with a binary answer, and the time-gated signal acquisition ensues improved sensitivity with a detection limit as low as 0.1 mU/mL. Furthermore, to ensure accessibility, particularly in resource-limited areas, we have developed an in loco imaging device as an affordable alternative to high-end instruments. The integration of the assay with the device readily identified the BL-associated drug-resistant strains in the mimic urinary tract infection samples within 2 h, demonstrating its excellent potential for in-field translation. We believe that this rapid paper-based POC assay, coupled with the in loco device, can be deployed anywhere, especially in developing regions, and will enable extensive surveillance on antibiotic-resistant infections.

β-Lactamase-Mediated Fragmentation: Historical Perspectives and Recent Advances in Diagnostics, Imaging, and Antibacterial Design

The discovery of β-lactam (BL) antibiotics in the early 20th century represented a remarkable advancement in human medicine, allowing for the widespread treatment of infectious diseases that had plagued humanity throughout history. Yet, this triumph was followed closely by the emergence of β-lactamase (BLase), a bacterial weapon to destroy BLs. BLase production is a primary mechanism of resistance to BL antibiotics, and the spread of new homologues with expanded hydrolytic activity represents a pressing threat to global health. Nonetheless, researchers have developed strategies that take advantage of this defense mechanism, exploiting BLase activity in the creation of probes, diagnostic tools, and even novel antibiotics selective for resistant organisms. Early discoveries in the 1960s and 1970s demonstrating that certain BLs expel a leaving group upon BLase cleavage have spawned an entire field dedicated to employing this selective release mechanism, termed BLase-mediated fragmentation. Chemical probes have been developed for imaging and studying BLase-expressing organisms in the laboratory and diagnosing BL-resistant infections in the clinic. Perhaps most promising, new antibiotics have been developed that use BLase-mediated fragmentation to selectively release cytotoxic chemical "warheads" at the site of infection, reducing off-target effects and allowing for the repurposing of putative antibiotics against resistant organisms. This Review will provide some historical background to the emergence of this field and highlight some exciting recent reports that demonstrate the promise of this unique release mechanism.

FRET-based cathepsin probes for simultaneous detection of cathepsin B and D activities

Fluorescent cathepsin probes were prepared by modification of peptidic substrates for cathepsin B (CTSB) and cathepsin D (CTSD) with FRET pairs. Fluorophores with distinguishable emission characteristics were applied to CTSB and CTSD probes with their appropriate quenchers to simultaneously monitor the activity of CTSB and/or CTSD. Conjugation of both the CTSB and CTSD probes with short single-stranded DNA drastically increased their reactivity to cathepsins over the parent probes possibly by improving their solubility. The activity of CTSB and CTSD were simultaneously detected by using these orthogonal FRET-based cathepsin probes.

β-Lactamase-Responsive Probe for Efficient Photodynamic Therapy of Drug-Resistant Bacterial Infection

Several photosensitizers have recently been proposed as novel approaches against β-lactamase-producing drug-resistant bacteria. However, these reported photosensitizers are rarely used for accurate recognition of drug-resistant bacteria. To tackle this challenge, the structurally modified photosensitizer CySG-2 based on a lipophilic cationic heptamethine indocyanine near-infrared (NIR) dye (IR-780) and an important synthesis intermediate of cephalosporin antibiotic (GCLE) not only achieved the accurate recognition of TEM-1 methicillin-resistant Staphylococcus aureus (MRSA) successfully but also achieved antimicrobial photodynamic therapy (aPDT) in animal models infected by drug-resistant bacteria. Accurate enzyme recognition and efficient photodynamic therapy capabilities allow CySG-2 to achieve one stone with two birds. In addition, CySG-2 could also promote the eradication of internalized MRSA by facilitating the autophagy process, which is synergistic with its capacity of inducing reactive oxygen species generation under NIR laser irradiation for aPDT. Collectively, it is an effective multifunctional photosensitizer with the potential ability to guide the optimal use of different antibiotics and apply them in clinical treatment.

Small-molecule fluorescent probes: big future for specific bacterial labeling and infection detection

Bacterial infections remain a global healthcare problem that is particularly attributed to the spread of antibiotic resistance and the evolving pathogenicity. Accurate and swift approaches for infection diagnosis are urgently needed to facilitate antibiotic stewardship and effective medical treatment. Direct optical imaging for specific bacterial labeling and infection detection offers an attractive prospect of precisely monitoring the infectious disease status and therapeutic response in real time. This feature article focuses on the recent advances of small-molecule probes developed for fluorescent imaging of bacteria and infection, which covers the probe design, responsive mechanisms and representative applications. In addition, the perspective and challenges to advance small-molecule fluorescent probes in the field of rapid drug-resistant bacterial detection and clinical diagnosis of bacterial infections are discussed. We envision that the continuous advancement and clinical translations of such a technique will have a strong impact on future anti-infective medicine.

Flipping the Switch: Innovations in Inducible Probes for Protein Profiling

Over the past two decades, activity-based probes have enabled a range of discoveries, including the characterization of new enzymes and drug targets. However, their suitability in some labeling experiments can be limited by nonspecific reactivity, poor membrane permeability, or high toxicity. One method for overcoming these issues is through the development of “inducible” activity-based probes. These probes are added to samples in an unreactive state and require in situ transformation to their active form before labeling can occur. In this Review, we discuss a variety of approaches to inducible activity-based probe design, different means of probe activation, and the advancements that have resulted from these applications. Additionally, we highlight recent developments which may provide opportunities for future inducible activity-based probe innovations.

Specific detection of IMP-1 β-lactamase activity using a trans cephalosporin-based fluorogenic probe

A fluorogenic probe for the specific detection of IMP-1 β-lactamase activity has been developed. This imaging reagent features a unique trans-acetylamino cephalosporin as an enzymatic recognition moiety, exhibiting excellent selectivity to IMP-1 β-lactamase over other β-lactamases, including serine- and metallo-β-lactamases. The selective activation of the probe by IMP-1 β-lactamase leads to over 30-fold enhancement in the fluorescence intensity, which allows enzyme activity to be reported with high sensitivity.

NIR Fluorescent Imaging and Photodynamic Therapy with a Novel Theranostic Phospholipid Probe for Triple-Negative Breast Cancer Cells

New exogenous probes are needed for both imaging diagnostics and therapeutics. Here, we introduce a novel nanocomposite near-infrared (NIR) fluorescent imaging probe and test its potency as a photosensitizing agent for photodynamic therapy (PDT) against triple-negative breast cancer cells. The active component in the nanocomposite is a small molecule, pyropheophorbide a-phosphatidylethanolamine-QSY21 (Pyro-PtdEtn-QSY), which is imbedded into lipid nanoparticles for transport in the body. The probe targets abnormal choline metabolism in cancer cells; specifically, the overexpression of phosphatidylcholine-specific phospholipase C (PC-PLC) in breast, prostate, and ovarian cancers. Pyro-PtdEtn-QSY consists of a NIR fluorophore and a quencher, attached to a PtdEtn moiety. It is selectively activated by PC-PLC resulting in enhanced fluorescence in cancer cells compared to normal cells. In our in vitro investigation, four breast cancer cell lines showed higher probe activation levels than noncancerous control cells, immortalized human mammary gland cells, and normal human T cells. Moreover, the ability of this nanocomposite to function as a sensitizer in PDT experiments on MDA-MB-231 cells suggests that the probe is promising as a theranostic agent.

A dual-caged resorufin probe for rapid screening of infections resistant to lactam antibiotics

The alarming increase of antimicrobial resistance urges rapid diagnosis and pathogen specific infection management. This work reports a rapid screening assay for pathogenic bacteria resistant to lactam antibiotics. We designed a fluorogenic N-cephalosporin caged 3,7-diesterphenoxazine probe CDA that requires sequential activations to become fluorescent resorufin. A series of studies with recombinant β-lactamases and clinically prevalent pathogens including Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae and Serratia marcescens demonstrated that CDA possessed superior sensitivity in reporting the activity of β-lactamases including cephalosporinases and carbapenemases. After a simple filtration, lactam-resistant bacteria in urine samples could be detected at 103 colony-forming units per milliliter within 2 hours.

Fluorescent Mesoporous Nanoparticles for β-Lactamase Screening Assays

We present a sensitive and rapid screening method for the determination of β-lactamase activity of antibiotic-resistant bacteria, by designing a pH-sensitive fluorescent dye-doped mesoporous silica nanoparticle encapsulated with penicillin G as a substrate. When penicillin G was hydrolysed by β-lactamase and converted into penicilloic acid, the acidic environment resulted in fluorescence quenching of the dye. The dye-doped mesoporous nanoparticles not only enhanced the β-lactamase-catalyzed reaction rate but also stablized the substrate, penicillin G, which degrades into penicilloic acid in a water solution without β-lactamase. Twentyfive clinical bacterial samples were tested and the antibiotic resistant and susceptible strains were identified. The proposed method may detect the presence of β -lactamases of clinically relevant samples in less than 1 hour. Moreover, the detection limit of β-lactamase activity was as low as 7.8×10-4 U/mL, which was determined within two hours.

Fluorescence imaging of drug target proteins using chemical probes

Fluorescence imaging can provide valuable information on the expression, distribution, and activity of drug target proteins. Chemical probes are useful small-molecule tools for fluorescence imaging with high structural flexibility and biocompatibility. In this review, we briefly introduce two classes of fluorescent probes for the visualization of drug target proteins. Enzymatically activatable probes make use of the specific enzymatic transformations that generally produce a fluorogenic response upon reacting with target enzymes. Alternatively, specific imaging can be conferred with a ligand that drives the probes to target proteins, where the labeling relies on noncovalent binding, covalent inhibition, or traceless labeling by ligand-directed chemistry.

•

Fluorescence imaging of drug target proteins is useful for studying their localization and interaction with drugs.

•

Enzymatically activatable probes provide high-contrast imaging and a readout of enzyme activity.

•

Targeted probes favor specific imaging of non-enzymatic proteins, and LD chemistry allows for traceless labeling.

A cephalosporin-chemiluminescent conjugate increases beta-lactamase detection sensitivity by four orders of magnitude

The expression of beta-lactamases in bacteria is a central cause of drug resistance. In this report, we present a beta-lactamase chemiluminescent probe, termed CCP, which can for the first time detect beta-lactamase activity via chemiluminescence and can detect beta lactamase with a sensitivity that is 4-orders of magnitude higher than the commercially available fluorescent lactamase substrate fluorocillin.

First clinical assessment of a prototype assay to detect the enzymatic activity of β-lactamase as a marker for pulmonary tuberculosis

The objective was to evaluate the sensitivity and specificity of a novel prototype test, TB REaD™, a reporter enzyme fluorescence-based assay, for pulmonary tuberculosis and to determine the optimal threshold for test positivity. This blinded, prospective study enrolled 250 patients, of which 23.2% were Mycobacterium tuberculosis complex (MTB) culture-positive. At the manufacturer-set threshold, sensitivity of the assay was 93.1% (95% confidence interval [CI] 83.3-98.1) and specificity was 8.9% (95% CI 5.2-13.8). The highest accuracy was seen at a higher threshold: sensitivity 58.6% (95% CI 44.9-71.4), specificity 59.4% (95% CI 52.1%-66.4%), with sensitivity by smear status being 40.0% (95% CI 21.1-61.3) for smear-negative and 72.7% (95% CI 54.5-86.7) for smear-positive. This study demonstrated limited accuracy of the TB REaD™ prototype for detection of pulmonary TB. Further improvements are necessary, potentially exploring probes that are more specific to MTB.

Development of carbapenem-based fluorogenic probes for the clinical screening of carbapenemase-producing bacteria

This report describes the synthesis of a library of fluorogenic carbapenemase substrates consisting of carbapenem derivatives, fluorescence dyes, and active cleavable linkers and their evaluation for specifically detecting carbapenemase-producing organisms (CPOs). We synthesized a series of compounds having three different types of linkers such as benzyl ether, carbamate, and amine using hydroxymethyl carbapenem 7a and hydroxyallyl carbapenem 7b as key intermediates. Probe 1b exhibited high stability and a prompt turn-on fluorescence signal upon hydrolysis by carbapenemases. In particular, the screening of clinical samples indicated that the probe 1b exhibited excellent selectivity to the CPOs over other β-lactamases or non-carbapenemase producing bacteria, which may be of clinical use for the rapid and accurate detection of CPOs for timely diagnosis and treatment.

New Trimodal Phenotypic Reporter of Extended-Spectrum β-Lactamase Activity

Bacterial resistance to β-lactam antibiotics continues to grow as misadministration presents evolutionary pressure that drives bacteria to develop improved resistance enzymes. Known as extended-spectrum β-lactamases (ESBLs), these enzymes are capable of hydrolyzing advanced β-lactam antibiotics such as third-generation (and higher) cephalosporins. Phenotypic detection substrates can be used to rapidly identify a cultured patient sample prior to confirmation by more exhaustive but slower means, critically aiding in the antibiotic stewardship essential in maintaining the effectiveness of not only the cephalosporins but also indirectly the carbapenems, our last-resort β-lactams. To enhance the phenotypic detection arsenal, we have designed an ESBL detection substrate that releases a glucose molecule upon β-lactamase hydrolysis. Because many forms of detection for glucose exist, the substrate enables ESBL quantification via three modalities commonly found in the clinical laboratory: optical absorbance, for use with the most common microbiology platforms; fluorescence, for enhanced sensitivity; and electrochemistry, which offers the potential for integration into a hand-held platform similar to a personal glucometer. Moreover, we demonstrate that, as opposed to currently available phenotypic detection substrates, our new substrate is engineered to be resistant to older and narrower β-lactamases, thus enabling specific identification of newer and more dangerous ESBLs.

A molecular design strategy toward enzyme-activated probes with near-infrared I and II fluorescence for targeted cancer imaging

The advance of cancer imaging requires innovations to establish novel fluorescent scaffolds that are excitable and emit in the near-infrared region with favorable Stokes shifts. Nevertheless, the lack of probes with these optimized optical properties presents a major bottleneck in targeted cancer imaging. By coupling of boron dipyrromethene platforms to enzymic substrates via a self-immolative benzyl thioether linker, we here report a strategy toward enzyme-activated fluorescent probes to satisfy these requirements. This strategy is applicable to generate various BODIPY-based probes across the NIR spectrum via introducing diverse electron-withdrawing substituents at the 3-position of the BODIPY core through a vinylene unit. As expected, such designed probes show advantages of two-channel ratiometric fluorescence and light-up NIR (I and II) emission with large Stokes shifts upon enzyme activation, enabling targeted cancer cell imaging and accurate tumor location by real-time monitoring of enzyme activities. This strategy is promising in engineering activatable molecular probes suitable for precision medicine.

Highly selective and wash-free visualization of resistant bacteria with a relebactam-derived fluorogenic probe

An unprecedented relebactam-based fluorogenic probe is reported for the wash-free imaging of resistant bacteria.

Unique Fluorescent Imaging Probe for Bacterial Surface Localization and Resistant Enzyme Imaging

Emergence of antibiotic bacterial resistance has caused serious clinical issues worldwide due to increasingly difficult treatment. Development of a specific approach for selective visualization of resistant bacteria will be highly significant for clinical investigations to promote timely diagnosis and treatment of bacterial infections. In this article, we present an effective method that not only is able to selectively recognize drug resistant AmpC β-lactamases enzyme but, more importantly, is able to interact with bacterial cell wall components, resulting in a desired localization effect on the bacterial surface. A unique and specific enzyme-responsive cephalosporin probe (DFD-1) has been developed for the selective recognition of resistance bacteria AmpC β-lactamase, by employing fluorescence resonance energy transfer with an "off-on" bioimaging. To achieve the desired localization, a lipid-azide conjugate (LA-12) was utilized to facilitate its penetration into the bacterial surface, followed by copper-free click chemistry. This enables the probe DFD-1 to be anchored onto the cell surface. In the presence of AmpC enzymes, the cephalosporin β-lactam ring on DFD-1 will be hydrolyzed, leading to the quencher release, thus generating fluorescence for real-time resistant bacterial screening. More importantly, the bulky dibenzocyclooctyne group in DFD-1 allowed selective recognition toward the AmpC bacterial enzyme instead of its counterpart ( e.g., TEM-1 β-lactamase). Both live cell imaging and cell cytometry assays showed the great selectivity of DFD-1 to drug resistant bacterial pathogens containing the AmpC enzyme with significant fluorescence enhancement (∼67-fold). This probe presented promising capability to selectively localize and screen for AmpC resistance bacteria, providing great promise for clinical microbiological applications.

Nonprotecting Group Synthesis of a Phospholipase C Activatable Probe with an Azo-Free Quencher

The near-infrared fluorescent activatable smart probe Pyro-phosphatidylethanolamine (PtdEtn)-QSY was synthesized and observed to selectively fluoresce in the presence of phosphatidylcholine-specific phospholipase C (PC-PLC). PC-PLC is an important biological target as it is known to be upregulated in a variety of cancers, including triple negative breast cancer. Pyro-PtdEtn-QSY features a QSY21 quenching moiety instead of the Black Hole Quencher-3 (BHQ-3) used previously because the latter contains an azo bond, which could lead to biological instability.

Twisted-Intramolecular-Charge-Transfer-Based Turn-On Fluorogenic Nanoprobe for Real-Time Detection of Serum Albumin in Physiological Conditions

Two cyanine-based fluorescent probes, ( E)-2-(4-(diethylamino)-2-hydroxystyryl)-3-ethyl-1,1-dimethyl-1 H-benzo[ e]indol-3-ium iodide (L) and ( E)-3-ethyl-1,1-dimethyl-2-(4-nitrostyryl)-1 H-benzo[ e]indol-3-ium iodide (L₁), have been designed and synthesized. Of these two probes, the twisted-intramolecular-charge-transfer (TICT)-based probe, L, can preferentially self-assemble to form nanoaggregates. L displayed a selective turn-on fluorescence response toward human and bovine serum albumin (HSA and BSA) in ∼100% aqueous PBS medium, which is noticeable with the naked eye, whereas L₁ failed to sense these albumin proteins. The selective turn-on fluorescence response of L toward HSA and BSA can be attributed to the selective binding of probe L with HSA and BSA without its interfering with known drug-binding sites. The specific binding of L with HSA led to the disassembly of the self-assembled nanoaggregates of L, which was corroborated by dynamic-light-scattering (DLS) and transmission-electron-microscopy (TEM) analysis. Probe L has a limit of detection as low as ∼6.5 nM. The sensing aptitude of probe L to detect HSA in body fluid and an artificial-urine sample has been demonstrated.

Active Probes for Imaging Membrane Dynamics of Live Cells with High Spatial and Temporal Resolution over Extended Time Scales and Areas

Despite the advancement of molecular imaging techniques, there is an unmet need for probes for direct imaging of membrane dynamics of live cells. Here we report a novel type of active (or enzyme responsive) probes to directly image membrane dynamics of live cells with high spatial and temporal resolution over extended time scales and areas. Because lipid rafts enrich cholesterols and GPI-anchored enzymes (e.g., ectophosphatases), we design probes that consist of an enzymatic trigger, a fluorophore, and a cholesterol that are affinitive to the cell membrane. Being water-soluble and as the substrate of ectophosphatase, these cell compatible probes preferentially and rapidly assemble in plasma membrane, exhibit strong fluorescence, work at micromolar concentrations, and easily achieve high resolution monitoring of nanoscale heterogeneity in membranes of live cells, the release of exosomes, and the membrane dynamics of live cells. This work provides a facile means to link membrane dynamics and heterogeneity to cellular processes for understanding the interactions between membranes and proteins.

Target-activated streptavidin-biotin controlled binding probe

Target-activated chemical probes are important tools in basic biological research and medical diagnosis for monitoring enzyme activities and reactive small molecules. Based on the fluorescence turn-on mechanism, they can be divided into two classes: dye-based fluorescent probes and caged-luciferin. In this paper, we introduce a new type of chemical probe in which the fluorescence turn-on is based on controlled streptavidin-biotin binding. Compared to conventional probes, the streptavidin-biotin controlled binding probe has several advantages, such as minimal background at its "OFF" state, multiple signal amplification steps, and unlimited selection of the optimal dyes for detection. To expand the scope, a new synthetic method was developed, through which a wider range of analyte recognition groups can be easily introduced to construct the binding probe. This probe design was successfully applied to image and study secreted peroxynitrite (ONOO^-) at the cell surface of macrophages where information on ONOO^- is difficult to obtain. As the signals are generated upon the binding of streptavidin to the biotin probe, this highly versatile design can not only be used in fluorescence detection but can also be applied in various other detection modes, such as electrochemical and enzyme-amplified luminescence detection.

Near-Infrared Emissive Discrete Platinum(II) Metallacycles: Synthesis and Application in Ammonia Detection

Two novel discrete organoplatinum(II) metallacycles are prepared by means of coordination-driven self-assembly of a 90° organoplatinum(II) acceptor, cis-(PEt3)2Pt(OTf)2, with two donors, a pyridyl donor, 9,10-di(4-pyridylvinyl)anthracene, and one of two dicarboxylate ligands. Both metallacycles display aggregation-induced emission as well as solvatochromism. More interestingly, both metallacycles exhibit near-infrared fluorescent emission in the solid state and can be used to detect ammonia gas.

Intramolecular substitution uncages fluorogenic probes for detection of metallo-carbapenemase-expressing bacteria

This work reports a novel caging strategy for designing fluorogenic probes to detect the activity of β-lactamases. The caging strategy uses a thiophenyl linker connected to a fluorophore caged by a good leaving group-dinitrophenyl. The uncaging proceeds in two steps through the sulfa-releasing and subsequent intramolecular substitution. The length of the linker has been examined and optimized to maximize the rate of intramolecular reaction and thus the rate of fluorescence activation. Finally based on this strategy, we prepared a green fluorogenic probe CAT-7 and validated its selectivity for detecting metallo-carbapenemases (VIM-27, IMP-1, NDM-1) in carbapenem-resistant Enterobacteriaceae (CRE) lysates.

Live Cell Imaging and Profiling of Cysteine Cathepsin Activity Using a Quenched Activity-Based Probe

Since protease activity is highly regulated by structural and environmental influences, the abundance of a protease often does not directly correlate with its activity. Because in most of the cases it is the activity of a protease that gives rise to its biological relevance, tools to report on this activity are of great value to the research community. Activity-based probes (ABPs) are small molecule tools that allow for the monitoring and profiling of protease activities in complex biological systems. The class of fluorescent quenched ABPs (qABPs), being intrinsically "dark" and only emitting fluorescence after reaction with the target protease, are ideally suited for imaging techniques such as small animal noninvasive fluorescence imaging and live cell fluorescence microscopy. An additional powerful characteristic of qABPs is their covalent and irreversible modification of the labeled protease, enabling in-depth target characterization. Here we describe the synthesis of a pan-cysteine cathepsin qABP BMV109 and the application of this probe to live cell fluorescence imaging and fluorescent SDS-PAGE cysteine cathepsin activity profiling.

Enzyme-responsive reporter molecules for selective localization and fluorescence imaging of pathogenic biofilms

A novel enzyme-responsive reporter molecule (ERM-1) for selective localization of AmpC in pathogenic biofilms.

Quantitative Fluorescence Sensing Through Highly Autofluorescent, Scattering, and Absorbing Media Using Mobile Microscopy

Compact and cost-effective systems for in vivo fluorescence and near-infrared imaging in combination with activatable reporters embedded inside the skin to sample interstitial fluid or blood can enable a variety of biomedical applications. However, the strong autofluorescence of human skin creates an obstacle for fluorescence-based sensing. Here we introduce a method for quantitative fluorescence sensing through highly autofluorescent, scattering, and absorbing media. For this, we created a compact and cost-effective fluorescence microscope weighing <40 g and used it to measure various concentrations of a fluorescent dye embedded inside a tissue phantom, which was designed to mimic the optical characteristics of human skin. We used an elliptical Gaussian beam excitation to digitally separate tissue autofluorescence from target fluorescence, although they severely overlap in both space and optical spectrum. Using ∼10-fold less excitation intensity than the safety limit for skin radiation exposure, we successfully quantified the density of the embedded fluorophores by imaging the skin phantom surface and achieved a detection limit of ∼5 × 10(5) and ∼2.5 × 10(7) fluorophores within ∼0.01 μL sample volume that is positioned 0.5 and 2 mm below the phantom surface, corresponding to a concentration of 105.9 pg/mL and 5.3 ng/mL, respectively. We also confirmed that this approach can track the spatial misalignments of the mobile microscope with respect to the embedded target fluorescent volume. This wearable microscopy platform might be useful for designing implantable biochemical sensors with the capability of spatial multiplexing to continuously monitor a panel of biomarkers and chronic conditions even at patients' home.

Fluorescence switchable probes based on a molecular rotor for selective detection of proteins and small molecules

In this communication, we report a general strategy to create fluorescence switchable probes, where a small molecule ligand is conjugated to a fluorescent molecular rotor, for the selective detection of proteins through a non-enzymatic process. In the presence of target proteins, bond rotation of the molecular rotor is restricted, thereby triggering the emission of strong fluorescence.

Near-infrared fluorescence activation probes based on disassembly-induced emission cyanine dye

Currently most of the fluorogenic probes are designed for the detection of enzymes which work by converting the non-fluorescence substrate into the fluorescence product via an enzymatic reaction. On the other hand, the design of fluorogenic probes for non-enzymatic proteins remains a great challenge. Herein, we report a general strategy to create near-IR fluorogenic probes, where a small molecule ligand is conjugated to a novel γ-phenyl-substituted Cy5 fluorophore, for the selective detection of proteins through a non-enzymatic process. Detail mechanistic studies reveal that the probes self-assemble to form fluorescence-quenched J-type aggregate. In the presence of target analyte, bright fluorescence in the near-IR region is emitted through the recognition-induced disassembly of the probe aggregate. This Cy5 fluorophore is a unique self-assembly/disassembly dye as it gives remarkable fluorescence enhancement. Based on the same design, three different fluorogenic probes were constructed and one of them was applied for the no-wash imaging of tumor cells for the detection of hypoxia-induced cancer-specific biomarker, transmembrane-type carbonic anhydrase IX.

Quantitative detection of cells expressing BlaC using droplet-based microfluidics for use in the diagnosis of tuberculosis

This paper describes a method for the quantitative detection of cells expressing BlaC, a β-lactamase naturally expressed by Mycobacterium tuberculosis, intended for the diagnosis of tuberculosis. The method is based on the compartmentalization of bacteria in picoliter droplets at limiting dilutions such that each drop contains one or no cells. The co-encapsulation of a fluorogenic substrate probe for BlaC allows the quantification of bacteria by enumerating the number of fluorescent drops. Quantification of 10 colony forming units per milliliter is demonstrated. Furthermore, the encapsulation of single cell in drops maintains the specificity of the detection scheme even when the concentration of bacteria that do not express BlaC exceeds that expressing BlaC by one million-fold.

A fluorogenic aryl fluorosulfate for intraorganellar transthyretin imaging in living cells and in Caenorhabditis elegans

Fluorogenic probes, due to their often greater spatial and temporal sensitivity in comparison to permanently fluorescent small molecules, represent powerful tools to study protein localization and function in the context of living systems. Herein, we report fluorogenic probe 4, a 1,3,4-oxadiazole designed to bind selectively to transthyretin (TTR). Probe 4 comprises a fluorosulfate group not previously used in an environment-sensitive fluorophore. The fluorosulfate functional group does not react covalently with TTR on the time scale required for cellular imaging, but does red shift the emission maximum of probe 4 in comparison to its nonfluorosulfated analogue. We demonstrate that probe 4 is dark in aqueous buffers, whereas the TTR·4 complex exhibits a fluorescence emission maximum at 481 nm. The addition of probe 4 to living HEK293T cells allows efficient binding to and imaging of exogenous TTR within intracellular organelles, including the mitochondria and the endoplasmic reticulum. Furthermore, live Caenorhabditis elegans expressing human TTR transgenically and treated with probe 4 display TTR·4 fluorescence in macrophage-like coelomocytes. An analogue of fluorosulfate probe 4 does react selectively with TTR without labeling the remainder of the cellular proteome. Studies on this analogue suggest that certain aryl fluorosulfates, due to their cell and organelle permeability and activatable reactivity, could be considered for the development of protein-selective covalent probes.

Novel fluorescent probes based on rhodamine for naked-eye detection of Fe3+ and their application of imaging in living cells

Novel fluorescent probes for Fe³⁺ and their application of imaging in living cells.

Fluorogenic probes with substitutions at the 2 and 7 positions of cephalosporin are highly BlaC-specific for rapid Mycobacterium tuberculosis detection

Current methods for the detection of Mycobacterium tuberculosis (Mtb) are either time consuming or require expensive instruments and are thus are not suitable for point-of-care diagnosis. The design, synthesis, and evaluation of fluorogenic probes with high specificity for BlaC, a biomarker expressed by Mtb, are described. The fluorogenic probe CDG-3 is based on cephalosporin with substitutions at the 2 and 7 positions and it demonstrates over 120,000-fold selectivity for BlaC over TEM-1 Bla, the most common β-lactamase. CDG-3 can detect 10 colony-forming units of the attenuated Mycobacterium bovis strain BCG in human sputum in the presence of high levels of contaminating β-lactamases expressed by other clinically prevalent bacterial strains. In a trial with 50 clinical samples, CDG-3 detected tuberculosis with 90% sensitivity and 73% specificity relative to Mtb culture within one hour, thus demonstrating its potential as a low-cost point-of-care test for use in resource-limited areas.

An expanded set of fluorogenic sulfatase activity probes

Fluorogenic probes that are activated by an enzymatic transformation are ideally suited for profiling enzyme activities in biological systems. Here, we describe two fluorogenic enzyme probes, 3-O-methylfluorescein-sulfate and resorufin-sulfate, that can be used to detect sulfatases in mycobacterial lysates. Both probes were validated with a set of commercial sulfatases and used to reveal species-specific sulfatase banding patterns in a gel-resolved assay of mycobacterial lysates. The fluorogenic probes described here are suitable for various assays and provide a starting point for creating new sulfatase probes with improved selectivity for mycobacterial sulfatases.