Solutes probe hydration in specific association of cyclodextrin and adamantane

Easy and Effective Method for α-CD:N2O Host-Guest Complex Formation

α-CD:N2O "host-guest" type complexes were formed by a simple solid-gas reaction (N2O sorption into α-CD) under different gas pressures and temperatures. The new N2O inclusion method applied in the present study was compared with the already known technique based on the crystallization of clathrates from a water solution of α-CD saturated with N2O. A maximum storage capacity of 4.5 wt.% N2O was achieved when charging the cyclodextrin from a gas phase. The amount of included gas decreases to 1.3 wt.% when the complex is stored in air at 1 atm and room temperature, analogous to that achieved by the crystallization of α-CD:N2O. Furthermore, it was shown that the external coordination of N2O to either the upper or lower rim of α-CD without hydration water displacement is the preferred mode of binding, due to hydrogen bonds with neighboring -OH groups from the host macrocycle and three of the hydration water molecules nearby. The capacity of α-CD to store N2O and the thermal stability of the α-CD:N2O complex demonstrated promising applications of these types of complexes in food and beverages.

Integrating Enzymes with Supramolecular Polymers for Recyclable Photobiocatalytic Catalysis

Chemical modifications of enzymes excel in the realm of enzyme engineering due to its directness, robustness, and efficiency; however, challenges persist in devising versatile and effective strategies. In this study, we introduce a supramolecular modification methodology that amalgamates a supramolecular polymer with Candida antarctica lipase B (CalB) to create supramolecular enzymes (SupEnzyme). This approach features the straightforward preparation of a supramolecular amphiphilic polymer (β-CD@SMA), which was subsequently conjugated to the enzyme, resulting in a SupEnzyme capable of self-assembly into supramolecular nanoparticles. The resulting SupEnzyme nanoparticles can form micron-scale supramolecular aggregates through supramolecular and electrostatic interactions with guest entities, thus enhancing catalyst recycling. Remarkably, these aggregates maintain 80 % activity after seven cycles, outperforming Novozym 435. Additionally, they can effectively initiate photobiocatalytic cascade reactions using guest photocatalysts. As a consequence, our SupEnzyme methodology exhibits noteworthy adaptability in enzyme modification, presenting a versatile platform for various polymer, enzyme, and biocompatible catalyst pairings, with potential applications in the fields of chemistry and biology.

Overcoming barriers with non-covalent interactions: supramolecular recognition of adamantyl cucurbit[n]uril assemblies for medical applications

Adamantane, a staple in medicinal chemistry, recently became a cornerstone of a supramolecular host-guest drug delivery system, ADA/CB[n]. Owing to a good fit between the adamantane cage and the host cavity of the cucurbit[n]uril macrocycle, formed strong inclusion complexes find applications in drug delivery and controlled drug release. Note that the cucurbit[n]uril host is not solely a delivery vehicle of the ADA/CB[n] system but rather influences the bioactivity and bioavailability of drug molecules and can tune drug properties. Namely, as host-guest interactions are capable of changing the intrinsic properties of the guest molecule, inclusion complexes can become more soluble, bioavailable and more resistant to metabolic conditions compared to individual non-complexed molecules. Such synergistic effects have implications for practical bioapplicability of this complex system and provide a new viewpoint to therapy, beyond the traditional single drug molecule approach. By achieving a balance between guest encapsulation and release, the ADA/CB[n] system has also found use beyond just drug delivery, in fields like bioanalytics, sensing assays, bioimaging, etc. Thus, chemosensing in physiological conditions, indicator displacement assays, in vivo diagnostics and hybrid nanostructures are just some recent examples of the ADA/CB[n] applicability, be it for displacements purposes or as cargo vehicles.

Dual Effect of Secondary Solutes on Binding Equilibria: Contributions from Solute-Reactant Interactions and Solute-Water Interactions

This study examines the role of water in binding equilibria with a special focus on secondary solutes (cosolutes) that influence the equilibrium but are not constituents of the final product. Using a thermodynamic framework that includes an explicit term for the release of water molecules upon binding, this investigation reveals how solutes may alter equilibria by changing the activity of the reactants, reflected in ΔG°(obs), and by changing the chemical potential of the solvent, reflected in ΔGS. The framework is applied to four experimental binding systems that differ in the degree of electrostatic contributions. The model systems include the chelation of Ca2+ by EDTA and three host-guest reactions; the pairings of p-sulfonatocalix[4]arene with tetramethylammonium ion, cucurbit[7]uril with N-acetyl-phenylalanine-amide, and β-cyclodextrin with adamantane carboxylate are tested. Each reaction pair is examined by isothermal titration calorimetry at 25 °C in the presence of a common osmolyte, sucrose, and a common chaotrope, urea. Molar solutions of trehalose and phosphate were also tested with selected models. In general, cosolutes that enhance binding tend to reduce the solvation free energy penalty and cosolutes that weaken binding tend to increase the solvation free energy penalty. Notably, the nonpolar-nonpolar interaction between adamantane carboxylate and β-cyclodextrin is characterized by a ΔGS value near zero. The results with β-cyclodextrin, in particular, prompt further discussions of the hydrophobic effect and the biocompatible properties of trehalose. Other investigators are encouraged to test and refine the approach taken here to further our understanding of solvent effects on molecular recognition.

ESIPT-based fluorescent enhanced probes prompted by methylated β-cyclodextrin for the detection of thiophenols

Thiophenol and its derivatives are compounds with high toxicity to organisms and environmental pollution, so it is necessary to detect the level of thiophenols in the environment and biological samples. The probes 1a-b were obtained by introducing the 2,4-dinitrophenyl ether group into diethylcoumarin-salicylaldehyde based compounds. And they can form host-guest compounds with methylated β-cyclodextrin (M-β-CD), the association constants of inclusion complexes are 49.2 M-1, 125 M-1 respectively. The fluorescence intensities of probes 1a-b at 600 nm (1a) and 670 nm (1b) increased significantly in thiophenols detection. Meanwhile, with the addition of M-β-CD, the hydrophobic cavity of M-β-CD significantly increased the fluorescence intensity of probes 1a-b, thus the detection limits of probes 1a-b to thiophenols were reduced from 410 nM, 365 nM to 62 nM, 33 nM respectively. Whereas, the good selectivity and short response time of probes 1a-b towards thiophenols was not affected in the presence of M-β-CD. Moreover, probes 1a-b were used for further water sample detection and HeLa cell imaging experiments due to their good response to thiophenols and the results suggested that probes 1a-b had the potential to detect the content of thiophenols in water samples and living cells.

Not Always Sticky: Specificity of Protein Stabilization by Sugars Is Conferred by Protein-Water Hydrogen Bonds

Solutes added to buffered solutions directly impact protein folding. Protein stabilization by cosolutes or crowders has been shown to be largely driven by protein-cosolute volume exclusion complemented by chemical and soft interactions. By contrast to previous studies that indicate the invariably destabilizing role of soft protein-sugar attractions, we show here that soft interactions with sugar cosolutes are protein-specific and can be stabilizing or destabilizing. We experimentally follow the folding of two model miniproteins that are only marginally stable but in the presence of sugars and polyols fold into representative and distinct secondary structures: β-hairpin or α-helix. Our mean-field model reveals that while protein-sugar excluded volume interactions have a similar stabilizing effect on both proteins, the soft interactions add a destabilizing contribution to one miniprotein but further stabilize the other. Using molecular dynamics simulations, we link the soft protein-cosolute interactions to the weakening of direct protein-water hydrogen bonding due to the presence of sugars. Although these weakened hydrogen bonds destabilize both the native and denatured states of the two proteins, the resulting contribution to the folding free energy can be positive or negative depending on the amino acid sequence. This study indicates that the significant variation between proteins in their soft interactions with sugar determines the specific response of different proteins, even to the same sugar.

Proton‐Gradient‐Driven Sensitivity Enhancement of Liposome‐Encapsulated Supramolecular Chemosensors

An overarching challenge in the development of supramolecular sensor systems is to enhance their sensitivity, which commonly involves the synthesis of refined receptors with increased affinity to the analyte. We show that a dramatic sensitivity increase by 1–2 orders of magnitude can be achieved by encapsulating supramolecular chemosensors inside liposomes and exposing them to a pH gradient across the lipid bilayer membrane. This causes an imbalance of the influx and efflux rates of basic and acidic analytes leading to a significantly increased concentration of the analyte in the liposome interior. The utility of our liposome‐enhanced sensors was demonstrated with various host–dye reporter pairs and sensing mechanisms, and we could easily increase the sensitivity towards multiple biologically relevant analytes, including the neurotransmitters serotonin and tryptamine.

Cyclodextrin/Adamantane-Grafted Polyethylene Glycol-Based Self-assembling Constructs for Topical Delivery of Ketorolac Tromethamine: Formulation, Characterization, and In Vivo Studies

Topical formulation of non-steroidal anti-inflammatory drugs (NSAIDs) exhibits many advantages over the oral administration route, such as avoiding the direct effect on GIT and avoiding the poor oral bioavailability of such drugs. Our study aims to develop a new self-assembling construct based on the hydrophobic interaction between adamantane terminated poly (ethylene glycol) polymers and polymerized β-cyclodextrin. The viscous constructs were developed from direct mixing of host and guest polymer solutions, indicating spontaneous formation without cross-linkers. The modified system was evaluated by different analyses, including X-ray diffractometry, electron microscopy, isothermal titration calorimetry, and rheological analysis. Moreover, such a system's ability for drug loading and release was investigated via the in vitro release of ketorolac tromethamine (KT) as a model of NSAIDs. Finally, the prepared formulas were applied on a rat paw edema model to prove the enhanced anti-inflammatory activities. The obtained results indicated that the modified constructs have a rubbery porous structure with an amorphous nature. Also, from rheological results, the modified system exhibited a viscous behavior with higher loss modulus (G″) compared with storage (G'). The inclusion complexation between cyclodextrin and adamantane moieties was proved by the recorded high binding constants with a 1:1 stoichiometric ratio. Furthermore, the results showed the successful KT incorporation into the modified system and quantitatively released through a semi-permeable membrane in a sustained fashion (over 24 h). Finally, the in vivo results of the medicated constructs showed a significant inhibition of the induced inflammation and swelling, indicating that the modified construct has a great utility for safe non-irritating topical delivery applications.

Rapid self-healing and self-adhesive chitosan-based hydrogels by host-guest interaction and dynamic covalent bond as flexible sensor

A sensor used to monitor tissue deformation requires good flexibility, stretchability, self-adhesion, cyto-compatibility, and antibacterial property. Here, we prepared hydrogel sensor based on O-carboxymethyl chitosan (O-CMCS) and poly(vinyl alcohol) (PVA) for monitoring human and organ motions. Based on the host-guest complexing of poly(β-cyclodextrin) with diamantane, a cross-linker containing multiple aldehyde groups was prepared for cross-linking with O-CMCS through Schiff base linkages. Borax was used as the second cross-linker to cross-link PVA through dynamic borate ester bonds. Carbon nanotubes (CNTs) were added into the hydrogels to improve their electrical conductivity and mechanical properties. The obtained hydrogel exhibited rapid self-healing ability with healing efficiency as high as 97%-103% (in 15 s), good adhesion to human skin and wet organ, good antibacterial property, cyto-compatibility, and stretchability. Furthermore, the hydrogel sensor can monitor the respiratory movement of porcine lungs and the beating of rat hearts.

Cyclodextrin solubilization in hydrated reline: Resolving the unique stabilization mechanism in a deep eutectic solvent

By complexing with hydrophobic compounds, cyclodextrins afford increased solubility and thermodynamic stability to hardly soluble compounds, thereby underlining their invaluable applications in pharmaceutical and other industries. However, common cyclodextrins such as β-cyclodextrin, suffer from limited solubility in water, which often leads to precipitation and formation of unfavorable aggregates, driving the search for better solvents. Here, we study the solvation of cyclodextrin in deep eutectic solvents (DESs), environmentally friendly media that possess unique properties. We focus on reline, the DES formed from choline chloride and urea, and resolve the mechanism through which its constituents elevate β-cyclodextrin solubility in hydrated solutions compared to pure water or dry reline. Combining experiments and simulations, we determine that the remarkable solubilization of β-cyclodextrin in hydrated reline is mostly due to the inclusion of urea inside β-cyclodextrin's cavity and at its exterior surfaces. The role of choline chloride in further increasing solvation is twofold. First, it increases urea's solubility beyond the saturation limit in water, ultimately leading to much higher β-cyclodextrin solubility in hydrated reline in comparison to aqueous urea solutions. Second, choline chloride increases urea's accumulation in β-cyclodextrin's vicinity. Specifically, we find that the accumulation of urea becomes stronger at high reline concentrations, as the solution transitions from reline-in-water to water-in-reline, where water alone cannot be regarded as the solvent. Simulations further suggest that in dry DES, the mechanism of β-cyclodextrin solvation changes so that reline acts as a quasi-single component solvent that lacks preference for the accumulation of urea or choline chloride around β-cyclodextrin.

Guest-Mediated Reversal of the Tumbling Process in Phosphorus-Dendritic Compounds Containing β-Cyclodextrin Units: An NMR Study

The conformational study of dendritic platforms containing multiple β-cyclodextrin (βCD) units in the periphery is relevant to determine the availability of βCD cavities for the formation of inclusion complexes in aqueous biological systems. In this work, we performed a detailed conformational analysis in D2O, via 1D and 2D NMR spectroscopy of a novel class of phosphorus dendritic compounds of the type P3N3-[O-C6H4-O-(CH2)n-βCD]6 (where n = 3 or 4). We unambiguously demonstrated that a functionalized glucopyranose unit of at least one βCD unit undergoes a 360° tumbling process, resulting in a deep inclusion of the spacer that binds the cyclodextrin to the phosphorus core inside the cavity, consequently limiting the availability of the inner cavities. In addition, we confirmed through NMR titrations that this tumbling phenomenon can be reversed for all βCD host units using a high-affinity guest, namely 1-adamantanecarboxylic acid (AdCOOH). Our findings have demonstrated that it is possible to create a wide variety of multi-functional dendritic platforms.

Temperature-responsive supramolecular hydrogels

Hydrogels comprise a class of soft materials which are extremely useful in a number of contexts, for example as matrix-mimetic biomaterials for applications in regenerative medicine and drug delivery. One particular subclass of hydrogels consists of materials prepared through non-covalent physical crosslinking afforded by supramolecular recognition motifs. The dynamic, reversible, and equilibrium-governed features of these molecular-scale motifs often transcend length-scales to endow the resulting hydrogels with these same properties on the bulk scale. In efforts to engineer hydrogels of all types with more precise or application-specific uses, inclusion of stimuli-responsive sol-gel transformations has been broadly explored. In the context of biomedical uses, temperature is an interesting stimulus which has been the focus of numerous hydrogel designs, supramolecular or otherwise. Most supramolecular motifs are inherently temperature-sensitive, with elevated temperatures commonly disfavoring motif formation and/or accelerating its dissociation. In addition, supramolecular motifs have also been incorporated for physical crosslinking in conjunction with polymeric or macromeric building blocks which themselves exhibit temperature-responsive changes to their properties. Through molecular-scale engineering of supramolecular recognition, and selection of a particular motif or polymeric/macromeric backbone, it is thus possible to devise a number of supramolecular hydrogel materials to empower a variety of future biomedical applications.

Structural Insights into the Host-Guest Complexation between β-Cyclodextrin and Bio-Conjugatable Adamantane Derivatives

Understanding the host–guest chemistry of α-/β-/γ- cyclodextrins (CDs) and a wide range of organic species are fundamentally attractive, and are finding broad contemporary applications toward developing efficient drug delivery systems. With the widely used β-CD as the host, we herein demonstrate that its inclusion behaviors toward an array of six simple and bio-conjugatable adamantane derivatives, namely, 1-adamantanol (adm-1-OH), 2-adamantanol (adm-2-OH), adamantan-1-amine (adm-1-NH₂), 1-adamantanecarboxylic acid (adm-1-COOH), 1,3-adamantanedicarboxylic acid (adm-1,3-diCOOH), and 2-[3-(carboxymethyl)-1-adamantyl]acetic acid (adm-1,3-diCH₂COOH), offer inclusion adducts with diverse adamantane-to-CD ratios and spatial guest locations. In all six cases, β-CD crystallizes as a pair supported by face-to-face hydrogen bonding between hydroxyl groups on C2 and C3 and their adjacent equivalents, giving rise to a truncated-cone-shaped cavity to accommodate one, two, or three adamantane derivatives. These inclusion complexes can be terminated as (adm-1-OH)₂⊂CD₂ (1, 2:2), (adm-2-OH)₃⊂CD₂ (2, 3:2), (adm-1-NH₂)₃⊂CD₂ (3, 3:2), (adm-1-COOH)₂⊂CD₂ (4, 2:2), (adm-1,3-diCOOH)⊂CD₂ (5, 1:2), and (adm-1,3-diCH₂COOH)⊂CD₂ (6, 1:2). This work may shed light on the design of nanomedicine with hierarchical structures, mediated by delicate cyclodextrin-based hosts and adamantane-appended drugs as the guests.

Adamantane Functionalized Poly(2-oxazoline)s with Broadly Tunable LCST-Behavior by Molecular Recognition

Smart or adaptive materials often utilize stimuli-responsive polymers, which undergo a phase transition in response to a given stimulus. So far, various stimuli have been used to enable the modulation of drug release profiles, cell-interactive behavior, and optical and mechanical properties. In this respect, molecular recognition is a powerful tool to fine-tune the stimuli-responsive behavior due to its high specificity. Within this contribution, a poly(2-oxazoline) copolymer bearing adamantane side chains was synthesized via triazabicyclodecene-catalyzed amidation of the ester side chains of a poly(2-ethyl-2-oxazoline-stat-2-methoxycarbonylpropyl-2-oxazoline) statistical copolymer. Subsequent complexation of the pendant adamantane groups with sub-stoichiometric amounts (0-1 equivalents) of hydroxypropyl β-cyclodextrin or β-cyclodextrin enabled accurate tuning of its lower critical solution temperature (LCST) over an exceptionally wide temperature range, spanning from 30 °C to 56 °C. Furthermore, the sharp thermal transitions display minimal hysteresis, suggesting a reversible phase transition of the complexed polymer chains (i.e., the β-cyclodextrin host collapses together with the polymers) and a minimal influence by the temperature on the supramolecular association. Analysis of the association constant of the polymer with hydroxypropyl β-cyclodextrin via 1H NMR spectroscopy suggests that the selection of the macrocyclic host and rational polymer design can have a profound influence on the observed thermal transitions.

Cyclodextrins in Parenteral Formulations

Most drugs have very limited solubility in water and some can be extremely difficult to formulate as parenteral solutions where the dose should preferably be dissolved in couple of ml of aqueous media without use of organic solvents and surface active agents, or application of somewhat extreme techniques such as prodrug formation. Thus, pharmaceutical formulators are constantly looking for new, biologically acceptable, and low-cost armamentarium for parenteral formulation development. Cyclodextrins (CDs) are enabling pharmaceutical excipients that can temporarily camouflage undesirable physiochemical drug properties such as low aqueous solubility through formation of drug/CD inclusion complexes. CDs are cyclic oligosaccharides that have similar physiological and biological properties like linear saccharides of comparable molecular weight. Due to their very favorable toxicological and pharmacokinetic profiles their usage in parenteral drug formulations is frequently preferred over other solubilizing techniques. Here the physiochemical and biological properties of CDs are reviewed as well as their pharmacokinetics after intravenous administration. Their regulatory status is briefly reviewed and their tendency to self-assemble to form clusters or aggregates discussed. Finally, some examples are given of how CDs are applied in aqueous parenteral formulations, how their solubilizing effect has been enhanced and how their target concentration is determined.

Dexamethasone-loaded β-cyclodextrin for osteogenic induction of mesenchymal stem/progenitor cells and bone regeneration

Dexamethasone (DEX) is a glucocorticoid commonly used as an in vitro osteogenic inducer of mesenchymal stem/progenitor cells (abbreviated MSCs). However, several studies investigating the effects of glucocorticoids on bone regeneration through systemic injections have demonstrated negative impacts of the drugs at high concentration on the healing of hard tissues. These contrasting evidences suggest that application of glucocorticoids should be limited to low dosages but at the same time a long enough treatment period is preferred, which prompted us to evaluate the effects of different local release systems of DEX on MSC differentiation and bone repair. Two types of DEX-loaded β-cyclodextrin (CD) complexes, including CD/DEX and CD/AD-DEX, were fabricated via host-guest interactions and characterized by FTIR, 1H-NMR, MS-ESI, and UV-vis. The results demonstrated that these CD-based assemblies released DEX in differentiated profiles, with CD/DEX releasing significantly faster than CD/AD-DEX. Although CD/DEX were slightly more powerful than CD/AD-DEX in inducing rat bone marrow MSCs (rBMSCs) into osteogenic lineage in vitro, CD/AD-DEX was advantageous over CD/DEX in accelerating bone regeneration over a time period of 4 weeks in a rat tibia defect model. The results suggest that DEX-loaded assemblies via host-guest interactions are flexible in modulating DEX release patterns and have great potential in bone tissue engineering.

Efficient modification of PAMAM G1 dendrimer surface with β-cyclodextrin units by CuAAC: impact on the water solubility and cytotoxicity

The toxicity of the poly(amidoamine) dendrimers (PAMAM) caused by the peripheral amino groups has been a limitation for their use as drug carriers in clinical applications. In this work, we completely modified the periphery of PAMAM dendrimer generation 1 (PAMAM G1) with β-cyclodextrin (β-CD) units through the Cu(i)-catalyzed azide–alkyne cycloaddition (CuAAC) to obtain the PAMAM G1-β-CD dendrimer with high yield. The PAMAM G1-β-CD was characterized by ¹H- and ¹³C-NMR and mass spectrometry studies. Moreover, the PAMAM G1-β-CD dendrimer showed remarkably higher water solubility than native β-CD. Finally, we studied the toxicity of PAMAM G1-β-CD dendrimer in four different cell lines, human breast cancer cells (MCF-7 and MDA-MB-231), human cervical adenocarcinoma cancer cells (HeLa) and pig kidney epithelial cells (LLC-PK1). The PAMAM G1-β-CD dendrimer did not present any cytotoxicity in cell lines tested which shows the potentiality of this new class of dendrimers.

The toxicity of the poly(amidoamine) dendrimers (PAMAM) caused by the peripheral amino groups has been a limitation for their use as drug carriers in clinical applications.

A supramolecular platform for controlling and optimizing molecular architectures of siRNA targeted delivery vehicles

It requires multistep synthesis and conjugation processes to incorporate multifunctionalities into a polyplex gene vehicle to overcome numerous hurdles during gene delivery. Here, we describe a supramolecular platform to precisely control, screen, and optimize molecular architectures of siRNA targeted delivery vehicles, which is based on rationally designed host-guest complexation between a β-cyclodextrin-based cationic host polymer and a library of guest polymers with various PEG shape and size, and various density of ligands. The host polymer is responsible to load/unload siRNA, while the guest polymer is responsible to shield the vehicles from nonspecific cellular uptake, to prolong their circulation time, and to target tumor cells. A series of precisely controlled molecular architectures through a simple assembly process allow for a rapid optimization of siRNA delivery vehicles in vitro and in vivo for therapeutic siRNA-Bcl2 delivery and tumor therapy, indicating the platform is a powerful screening tool for targeted gene delivery vehicles.

Crowders Steal Dihydrofolate Reductase Ligands through Quinary Interactions

Dihydrofolate reductase (DHFR) reduces dihydrofolate (DHF) to tetrahydrofolate using NADPH as a cofactor. Due to its role in one carbon metabolism, chromosomal DHFR is the target of the antibacterial drug, trimethoprim. Resistance to trimethoprim has resulted in a type II DHFR that is not structurally related to the chromosomal enzyme target. Because of its metabolic significance, understanding DHFR kinetics and ligand binding behavior in more cell-like conditions, where the total macromolecule concentration can be as great as 300 mg/mL, is important. The progress-curve kinetics and ligand binding properties of the drug target (chromosomal E. coli DHFR) and the drug resistant (R67 DHFR) enzymes were studied in the presence of macromolecular cosolutes. There were varied effects on NADPH oxidation and binding to the two DHFRs, with some cosolutes increasing affinity and others weakening binding. However, DHF binding and reduction in both DHFRs decreased in the presence of all cosolutes. The decreased binding of ligands is mostly attributed to weak associations with the macromolecules, as opposed to crowder effects on the DHFRs. Computer simulations found weak, transient interactions for both ligands with several proteins. The net charge of protein cosolutes correlated with effects on NADP⁺ binding, with near neutral and positively charged proteins having more detrimental effects on binding. For DHF binding, effects correlated more with the size of binding pockets on the protein crowders. These nonspecific interactions between DHFR ligands and proteins predict that the in vivo efficiency of DHFRs may be much lower than expected from their in vitro rates.

Approaching Materials with Atomic Precision Using Supramolecular Cluster Assemblies

Supramolecular chemistry is a major area of chemistry that utilizes weaker non-covalent interactions between molecules, including hydrogen bonding, van der Waals, electrostatic, π···π, and C-H···π interactions. Such forces have been the basis of several molecular self-assemblies and host-guest complexes in organic, inorganic, and biological systems. Atomically precise nanoclusters (NCs) are materials of growing interest that display interesting structure-property correlations. The evolving science of such systems reaffirms their molecular behavior. This gives a possibility of exploring their supramolecular chemistry, leading to assemblies with similar or dissimilar cluster molecules. Such assemblies with compositional, structural, and conformational precision may ultimately result in cluster-assembled hybrid materials. In this Account, we present recent advancements on different possibilities of supramolecular interactions in atomically precise cluster systems that can occur at different length scales. We first present a brief discussion of the aspicule model of clusters, considering Au₂₅(SR)₁₈ as an example, that can explain various aspects of its atomic precision and distinguish the similar or dissimilar interacting sites in their structures. The supramolecular interaction of 4- tert-butylbenzyl mercaptan (BBSH)-protected [Au₂₅(SBB)₁₈]^- NCs with cyclodextrins (CD) to form Au₂₅SBB₁₈∩CD _n ( n = 1-4) and that of [Ag₂₉(BDT)₁₂]^3- with fullerenes to form [Ag₂₉(BDT)₁₂(C₆₀) _n]^3- ( n = 1-9) (BDT = 1,3-benzenedithiolate) are discussed subsequently. The formation of these adducts was studied by electrospray ionization mass spectrometry (ESI MS), optical absorption and NMR spectroscopy. In the subsequent sections, we discuss how variation in intercluster interactions can lead to polymorphic crystals, which are observable in single-crystal X-ray diffraction. Taking [Ag₂₉(BDT)₁₂(TPP)₄]^3- (TPP = triphenylphosphine) clusters as an example, we discuss how the different patterns of C-H···π and π···π interactions between the secondary ligands can alter the packing of the NCs into cubic and trigonal lattices. Finally, we discuss how the supramolecular interactions of atomically precise clusters can result in their hybrid assemblies with plasmonic nanostructures. The interaction of p-mercaptobenzoic acid ( p-MBA)-protected Ag₄₄( p-MBA)₃₀ NCs with tellurium nanowires (Te NWs) can form crossed-bilayer precision assemblies with a woven-fabric-like structure with an angle of 81° between the layers. Similar crossed-bilayer assemblies show an angle of 77° when Au₁₀₂( p-MBA)₄₄ clusters are used to form the structure. Such assemblies were studied by transmission electron microscopy (TEM). Precision in these hybrid assemblies of Te NWs was highly controlled by the geometry of the ligands on the NC surface. Moreover, we also present how Ag₄₄( p-MBA)₃₀ clusters can encapsulate gold nanorods to form cage-like nanostructures. Such studies involved TEM, scanning transmission electron microscopy (STEM), and three-dimensional tomographic reconstructions of the nanostructures. The hydrogen bonding interactions of the -COOH groups of the p-MBA ligands were the major driving force in both of these cases. An important aspect that is central to the advancement of the area is the close interplay of molecular tools such as MS with structural tools such as TEM along with detailed computational modeling. We finally conclude this Account with a future perspective on the supramolecular chemistry of clusters. Advancements in this field will help in developing new materials with potential optical, electrical, and mechanical properties.

Natural-Product-Tailored Polyurethane: Size-Dictated Construction of Polypseudorotaxanes with Cyclodextrin-Triterpenoid Pairs

Cyclodextrin (CD)-based polyrotaxanes (PRs) and polypseudorotaxanes (PPRs) have attracted considerable attention due to their unique topological structures and functions. However, limited by the simple chemical structures and the single functionalization of guest polymer units like poly(ethylene glycol) (PEG) and poly(propylene glycol) (PPG), to date the construction of CD-based PRs and PPRs with precisely controllable supramacromolecular structures is fairly rare. In this work, two kinds of molecular necklace-like PPRs with CD-triterpenoid pairs were prepared via the size-dictated construction, where the threaded guest polymer was a natural product-tailored polyurethane (PU-PEG-GA) with the alternating structure of triterpenoid and PEG segments via a simple step-growth polymerization. Taking advantage of the differentiation in host-guest interactions between β/γ-CD and triterpenoid pairs, β-CD simultaneously located on both PEG segments and triterpenoid units in PU-PEG-GA, while γ-CD selectively recognized triterpenoid units. Consequently, the assembly morphology of PU-PEG-GA was adjusted hierarchically from micelles to worms and vesicles upon addition of β-CD, whereas they gradually collapsed to disappear in the presence of γ-CD. Our biocompatible PPRs with precisely controllable supramacromolecular structures may lead to the exploration on understanding and simulating macromolecular recognition using natural products.

Reversing Redox Responsiveness of Hydrogels due to Supramolecular Interactions by Utilizing Double-Network Structures

Stimuli-responsive hydrogels have been actively researched, and some of them have been put into practical use. When we create and use stimuli-responsive hydrogel materials, controlling stimuli responsiveness of hydrogels is a very important issue. In this research, we prepared hydrogels having single-network (SN) or double-network (DN) gel structures with the host-guest interaction groups cyclodextrin and methyl viologen and evaluated their stimuli responsiveness. The results of the tensile and compression tests showed that the hydrogels with SN and DN structures exhibited opposite stimuli responsiveness in response to the redox reaction of methyl viologen through the association and dissociation of the host molecule, β-cyclodextrin, and the guest molecule, methyl viologen. Spectroscopic measurements and rheological studies all indicated that this difference in stimuli responsiveness originated from the polymer-network structures. In addition, a chemically cross-linked DN gel was prepared and its redox responsiveness was evaluated.

The Thermodynamics of Anion Complexation to Nonpolar Pockets

The interactions between nonpolar surfaces and polarizable anions lie in a gray area between the hydrophobic and Hofmeister effects. To assess the affinity of these interactions, NMR and ITC were used to probe the thermodynamics of eight anions binding to four different hosts whose pockets each consist primarily of hydrocarbon. Two classes of host were examined: cavitands and cyclodextrins. For all hosts, anion affinity was found to follow the Hofmeister series, with associations ranging from 1.6-5.7 kcal mol-1. Despite the fact that cavitand hosts 1 and 2 possess intrinsic negative electrostatic fields, it was determined that these more enveloping hosts generally bound anions more strongly. The observation that the four hosts each possess specific anion affinities that cannot be readily explained by their structures, points to the importance of counter cations and the solvation of the "empty" hosts, free guests, and host-guest complexes, in defining the affinity.

Effect of Dimethyl Sulfoxide on the Binding of 1-Adamantane Carboxylic Acid to β- and γ-Cyclodextrins

Most therapeutic targets are proteins whose binding sites are hydrophobic cavities. For this reason, the majority of drugs under development are hydrophobic molecules exhibiting low solubility in water. To tackle this issue, a few percent of cosolvent, such as dimethyl sulfoxide (DMSO), is usually employed to increase drug solubility during the drug screening process. However, the few published studies dealing with the effect of adding DMSO showed that the affinity of hydrophobic ligands is systematically underestimated. To better understand the effect of DMSO, there is a need of studying its effect on a large range of systems. In this work, we used β- and γ-cyclodextrins (made of 6 and 7 α-d-glucopyranoside units, respectively) as models of hydrophobic cavities to investigate the effect of the addition 5% DMSO on the affinity of 1-adamantane carboxylic acid (ADA) to these cyclodextrins. The two systems differ by the size of the cyclodextrin cavity. The evaluation of binding constants was performed using ultrasound velocimetry, nuclear magnetic resonance spectroscopy, and molecular simulations. All techniques show that the presence of 5% DMSO does not significantly modify the affinity of ADA for γ-cyclodextrin, while the affinity is dramatically reduced for β-cyclodextrin. The bias induced by the presence of DMSO is thus more important when the ligand volume better fits the cyclodextrin cavity. Our work also suggests that free energy calculations provide a sound alternative to experimental techniques when dealing with poorly water-soluble drugs.

Acid-sensitive poly(β-cyclodextrin)-based multifunctional supramolecular gene vector

Multifunctional host–guest supramolecular PCD-acetal-PGEA/Ad-PEG-FA polyplexes showing FA-targeting and acid-triggered intracellular gene release resulted in good transfection efficiency and low cytotoxicity.

β-Cyclodextrin- and adamantyl-substituted poly(acrylate) self-assembling aqueous networks designed for controlled complexation and release of small molecules

Three aqueous self-assembling poly(acrylate) networks have been designed to gain insight into the factors controlling the complexation and release of small molecules within them. These networks are formed between 8.8% 6^A-(2-aminoethyl)amino-6^A-deoxy-6^A-β-cyclodextrin, β-CDen, randomly substituted poly(acrylate), PAAβ-CDen, and one of the 3.3% 1-(2-aminoethyl)amidoadamantyl, ADen, 3.0% 1-(6-aminohexyl)amidoadamantyl, ADhn, or 2.9% 1-(12-aminododecyl)amidoadamantyl, ADddn, randomly substituted poly(acrylate)s, PAAADen, PAAADhn and PAAADddn, respectively, such that the ratio of β-CDen to adamantyl substituents is ca. 3:1. The variation of the characteristics of the complexation of the dyes methyl red, methyl orange and ethyl orange in these three networks and by β-cyclodextrin, β-CD, and PAAβ-CDen alone provides insight into the factors affecting dye complexation. The rates of release of the dyes through a dialysis membrane from the three aqueous networks show a high dependence on host–guest complexation between the β-CDen substituents and the dyes as well as the structure and the viscosity of the network as shown by ITC, ¹H NMR and UV–vis spectroscopy, and rheological studies. Such networks potentially form a basis for the design of controlled drug release systems.

Impact of trehalose on the activity of sodium and potassium chloride in aqueous solutions: Why trehalose is worth its salt

Trehalose is revered for its multiple unique impacts on solution properties, including the ability to modulate the salty and bitter tastes of sodium and potassium salts. However, the molecular mechanisms underlying trehalose's effect on taste perception are unknown. Here we focus on the physico-chemical effect of trehalose to alter the activity of monovalent salts in aqueous solution. Using a modified isopiestic methodology that relies on contemporary vapor pressure osmometry, we elucidate how trehalose modifies the thermodynamic chemical activity of sodium and potassium chloride, as well as the effect of the salts on the sugar's activity. We find that trehalose has a specific impact on potassium chloride that is unlike that of other sugars or polyols. Remarkably, especially at low salt concentrations, trehalose considerably elevates the activity (or chemical potential) of KCl, raising the salt activity coefficient as high as ∼1.5 its value in the absence of the sugar. Moreover, in contrast to their action on other known carbohydrates, both KCl and NaCl act as salting-out agents towards trehalose, as seen in the elevated activity coefficient compared with its value in pure water (up to ∼1.5 higher at low sugar and salt concentrations). We discuss the possible relevance of our findings to the mechanism of trehalose taste perception modification, and point to necessary future directed sensory experiments needed to resolve the possible link between our findings and the emerging biochemical or physiological mechanisms involved.