In Situ Synthesis of Temperature-Sensitive Hollow Microspheres via Interfacial Polymerization

Charged hollow microgel capsules

Responsive hollow microgels are a fascinating class of soft model systems at the crossover between polymer capsules and microgels. The presence of the cavity makes them promising materials for encapsulation and controlled release applications but also confers them an additional softness that is reflected by their peculiar behaviour in bulk and at interfaces. Their responsivity to external stimuli, such as temperature, pH, and ionic strength, can be designed from their synthesis conditions and the choice of functional moieties. So far most studies have focused on "small" hollow microgels that were mostly studied with scattering or atomic force microscopy techniques. In our previous study, we have shown that large fluorescent hollow poly(N-isopropylacrylamide) (PNIPAM) microgels could be synthesized using micrometer-sized silica particles as sacrificial templates allowing their investigation in situ via confocal microscopy. In this work, we extend this approach to charged large hollow microgels based on poly(N-isopropylacrylamide-co-itaconic acid) (P(NIPAM-co-IA)). Hereby, we compare the structure and responsivity of "neutral" (PNIPAM) and "charged" (P(NIPAM-co-IA)) hollow microgel systems synthesized under similar conditions with the same sacrificial template using confocal and atomic force microscopy and light scattering techniques. In particular, we could demonstrate the extremely soft character of the swollen charged hollow microgels and their responsivity to pH, ionic strength, and temperature. To conclude this study, the buckling behavior of the different capsules was investigated illustrating the potential of such systems to change its conformation by varying the osmotic pressure and pH conditions.

Monoporous Microsphere as a Dynamically Movable Drug Carrier for Osteoporotic Bone Remodeling

To repair systematically osteoporotic bone defects, it is significant to take effort on both the diminishment of osteoporosis and the enhancement of bone regeneration. Herein, a specifically monoporous microsphere carrier encapsulating dosage-sensitive and short half-time parathyroid hormone (PTH) has been constructed to tackle the issue. Compared with conventional microsphere carriers involving compact, porous, and mesoporous microspheres, the monoporous microsphere is desirable to achieve precisely in-situ delivery and to minimize topical accumulation. Our findings show that the PTH loaded inside MPMs can be gradually released from the single hole of MPMs to improve the initial drug concentration. Also, the MPMs can self-shift with the daily movement of experimental animals to effectively reduce the topical aggregation of released drugs in vitro. In vivo evaluation further confirms that the implant of MPMs-PTH plays a dual role in stimulating the regenerative repair of the cranial defect and relieving osteoporosis in the whole body. Consequently, our current work develops a dynamically movable drug delivery system to achieve precisely in-situ delivery, minimize topical accumulation, and systematically repair osteoporotic bone defects. This article is protected by copyright. All rights reserved.

Multifunctional Silica-Modified Hybrid Microgels Templated from Inverse Pickering Emulsions

Microgels are regarded as soft colloids with environmental responsiveness. However, the majority of reported microgels are inherently hydrophilic, resulting in aqueous dispersions, and only used in water-based applications. Herein, we reported an efficient method for hybridization of poly(N-isopropylacrylamide) microgel by coating hydrophobic silica nanoparticles on their surface. The resultant hybrid microgel had switchable surface wettability and could be dispersed in both aqueous and oil phases. Meanwhile, the coated hydrophobic silica nanoparticles solved the difficulty in redispersing microgels caused by particle aggregation and film formation during the drying process, providing a significant advantage in dried storage. Furthermore, the introduction of hydrophobic silica nanoparticles endowed the hybrid microgel with a variety of applications, including cargo encapsulation, active release induced by emulsion reversion, and trace water absorption.

Insight into the mechanism and formation process of bioinspired poly(amino acid)/polyphenol capsules engineered with fast pH switchable permeability

Capsules have hollow cores and closed wall structures, and they have attracted considerable interest due to their wide applications and significance in life science. The engineering process of bioinspired capsules and related applications have earned heavy concerns. However, the mechanism of capsule formation is often ignored. Herein, based on polyornithine (POR) and tannic acid (TA), two facile strategies to engineer bioinspired capsules were proposed, and the formation mechanisms were deeply explored. We found that the oxidized state of TA had a profound influence not on the thickness or permeability of the formed capsule but on the mechanism and generation process. Compared to TA/POR capsules produced from TA without oxidization (TA/POR), capsules produced from TA with preoxidization (oTA/POR) had thicker shells with higher impermeability. The dominant construction mode in the shells of TA/POR capsules was electrostatic interactions but became Schiff base bonds in oTA/POR capsules. The permeability of oTA/POR displayed pH reversibility and strong pH dependence, with 100% permeability at lower pH and 100% impermeability at pH 7, completing loading/releasing kinetics in minutes at pH 4. We believe these findings contribute to knowledge of bioinspired capsules from engineering processes and formation mechanisms, extending their applications in various fields, such as in drug delivery, artificial cells, and sensors.

Nanogels: A novel approach in antimicrobial delivery systems and antimicrobial coatings

The implementation of nanotechnology to develop efficient antimicrobial systems has a significant impact on the prospects of the biomedical field. Nanogels are soft polymeric particles with an internally cross-linked structure, which behave as hydrogels and can be reversibly hydrated/dehydrated (swollen/shrunken) by the dispersing solvent and external stimuli. Their excellent properties, such as biocompatibility, colloidal stability, high water content, desirable mechanical properties, tunable chemical functionalities, and interior gel-like network for the incorporation of biomolecules, make them fascinating in the field of biological/biomedical applications. In this review, various approaches will be discussed and compared to the newly developed nanogel technology in terms of efficiency and applicability for determining their potential role in combating infections in the biomedical area including implant-associated infections.

Preparation of Salt-Responsive Hollow Hydrophilic Polymer Particles by Inverse Suspension Polymerization

Hydrophilic polymer particles with a hollow structure have potential applications such as carriers for hydrophilic drugs. However, there are few reports on preparation and morphology control of such particles via a simple method. In this study, hollow hydrophilic polymer particles were prepared by inverse suspension polymerization for water droplets containing 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) anions, 1-vinylimidazole (VIm) cations, oligo(ethylene glycol) diacrylate (OEGDA), dextran, and an initiator via the self-assembling phase-separated polymer (SaPSeP) method developed in our lab. The inner morphology of the particle could be controlled (as single- or multi-hollow structures) by changing the concentrations of the OEGDA and the dextran. The obtained hollow particles could encapsulate a hydrophilic fluorescent substance in their hollow region when the substance was added to the primary droplets before polymerization. In addition, the poly(AMPS-co-VIm-co-OEGDA) shell of the particles exhibited an ionic cross-linked structure, which could be stimulated by salt. The poly(AMPS-co-VIm-co-OEGDA) hollow particles with the encapsulated substance released the substance when salt was added to the dispersion. These results indicated that the applicability of the SaPSeP method can be broadened for morphology control of the hydrophilic polymer particles encapsulating water-soluble materials.

Polycarbazole and Its Derivatives: Synthesis and Applications. A Review of the Last 10 Years

Polycarbazole and its derivatives have been extensively used for the last three decades, although the interest in these materials briefly decreased. However, the increasing demand for conductive polymers for several applications such as light emitting diodes (OLEDs), capacitators or memory devices, among others, has renewed the interest in carbazole-based materials. In this review, the synthetic routes used for the development of carbazole-based polymers have been summarized, reviewing the main synthetic methodologies, namely chemical and electrochemical polymerization. In addition, the applications reported in the last decade for carbazole derivatives are analysed. The emergence of flexible and wearable electronic devices as a part of the internet of the things could be an important driving force to renew the interest on carbazole-based materials, being conductive polymers capable to respond adequately to requirement of these devices.

Interfacial Polymerization: From Chemistry to Functional Materials

Interfacial polymerization, where a chemical reaction is confined at the liquid-liquid or liquid-air interface, exhibits a strong advantage for the controllable fabrication of films, capsules, and fibers for use as separation membranes and electrode materials. Recent developments in technology and polymer chemistry have brought new vigor to interfacial polymerization. Here, we consider the history of interfacial polymerization in terms of the polymerization types: interfacial polycondensation, interfacial polyaddition, interfacial oxidative polymerization, interfacial polycoordination, interfacial supramolecular polymerization, and some others. The accordingly emerging functional materials are highlighted, as well as the challenges and opportunities brought by new technologies for interfacial polymerization. Interfacial polymerization will no doubt keep on developing and producing a series of fascinating functional materials.

Robust liquid-core nanocapsules as biocompatible and precise ratiometric fluorescent thermometers for living cells

Intracellular thermometry with favorable biocompatibility and precision is essential for insight into temperature-related cellular events. Here, liquid-core nanocapsule ratiometric fluorescent thermometers (LCN-RFTs) were prepared by encapsulating thermosensitive organic fluorophores (N,N'-di(2-ethylhexyl)-3,4,9,10-perylene tetracarboxylic diimide, DEH-PDI) with hydrophobic solvent (2,2,4-trimethylpentane, TMP) into polystyrene/silica hybrid nanoshells. As the fluorescent thermosensitive unit of the LCN-RFT, the TMP solution of DEH-PDI was responsible for the fluorescence response to temperature. Benefitting from the hydrophilic nanoshells, the LCN-RFTs exhibited favorable anti-interference and biocompatibility. Furthermore, the LCN-RFTs showed an excellent precision of 0.02 °C-0.10 °C in a simulated physiological environment from 10.00 °C to 90.00 °C, and were employed to realize intracellular thermometry with an outstanding precision of 0.06 °C-0.14 °C. This work provides a feasible method of using hydrophobic organic fluorophores for intracellular thermometry by encapsulating them into nanocapsules.

Catalytic Activity of Alkali Metal Cations for the Chemical Oxygen Reduction Reaction in a Biphasic Liquid System Probed by Scanning Electrochemical Microscopy

Chemical reduction of dioxygen in organic solvents for the production of reactive oxygen species or the concomitant oxidation of organic substrates can be enhanced by the separation of products and educts in biphasic liquid systems. Here, the coupled electron and ion transfer processes is studied as well as reagent fluxes across the liquid|liquid interface for the chemical reduction of dioxygen by decamethylferrocene (DMFc) in a dichloroethane-based organic electrolyte forming an interface with an aqueous electrolyte containing alkali metal ions. This interface is stabilized at the orifice of a pipette, across which a Galvani potential difference is externally applied and precisely adjusted to enforce the transfer of different alkali metal ions from the aqueous to the organic electrolyte. The oxygen reduction is followed by H2 O2 detection in the aqueous phase close to the interface by a microelectrode of a scanning electrochemical microscope (SECM). The results prove a strong catalytic effect of hydrated alkali metal ions on the formation rate of H2 O2 , which varies systematically with the acidity of the transferred alkali metal ions in the organic phase.

Construction and Swelling Properties of Thermosensitive N-isopropyl Acrylamide Microspheres With Controllable Size

In recent years, thermosensitive poly(N-isopropylacrylamide) (PNIPAM) microspheres have received extensive attention due to their many advantages, and their size and swelling ratio are two crucial factors. In this paper, homogeneous and hollow thermosensitive microspheres were prepared by free radical polymerization in an aqueous solution. The effects of the process parameters on the size of the microspheres were studied. The results indicated that the change in size during reaction at different temperatures was not obvious. The size of the microspheres ranged from 802 ± 35.4 nm to 423 ± 33.7 nm with the changes in the dosage of the initiator. Meanwhile, it was observed that the size of microspheres was slightly reduced due to the increase of reaction time. When the dosage of methyl methacrylate (MAA) is increased, the size of the hollow microspheres increased by more than 110%. The average size of the microspheres was smaller when the content of sodium dodecyl sulfate (SDS) was 3 wt%. The microspheres with varying reaction parameters showed a continuous decreasing swelling ratio when the temperatures were changed from 28 °C to 35 °C. In comparison with homogeneous microspheres, the average swelling ratio of hollow microspheres was larger.

Microfluidics Assisted Fabrication of Three-Tier Hierarchical Microparticles for Constructing Bioinspired Surfaces

Construction of textured bioinspired surfaces with refined structures that exhibit superior wetting properties is of great importance for many applications ranging from self-cleaning, antibiofouling, anti-icing, oil/water separation, smart membrane, and microfluidic devices. Previously, the preparation of artificial surfaces generally relies on the combination of different approaches together, which is a lack of flexibility to control over the individual architecture unit, the surface topology, as well as the complex procedure needed. In this work, we report a method for rapid fabrication of three-tier hierarchical microunits (structures consisting of multiple levels) using a facile droplet microfluidics approach. These units include the first-tier microspheres consisting of the second-tier close-packed polystyrene (PS) nanoparticles decorated with the third-tier elegant polymer nanowrinkles. These nanowrinkles on the PS nanoparticles are formed according to the interfacial instability induced by gradient photopolymerization of N-isopropylacrylamide (NIPAM) monomers. The formation process and topologies of nanowrinkles can be regulated by the photopolymerization process and the fraction of carboxylic groups on the PS nanoparticle surface. Such a hierarchical microsphere mimics individual units of bioinspired surfaces. Therefore, the surfaces from self-assembly of these fabricated two-tier and three-tier hierarchical microunits collectively exhibit "gecko" and "rose petal" wetting states, with the micro- and nanoscale structures amplifying the initial hydrophobicity but still being highly adhesive to water. This approach offers promising advantages of high-yield fabrication, precise control over the size and component of the microspheres, and integration of microfluidic droplet generation, colloidal nanoparticle self-assembly, and interfacial polymerization-induced nanowrinkles in a straightforward manner.

Tailoring carbon nitride properties and photoactivity by interfacial engineering of hydrogen-bonded frameworks

The rational synthesis of carbon nitride materials, ranging from polymeric carbon nitride to nitrogen-doped carbon, by supramolecular preorganization of their monomers is a powerful tool for the design of their morphology and photophysical and catalytic activities. Here we show a new facile and scalable approach for the synthesis of ordered CN materials with excellent photoactivity, which consists of supramolecular interfacial preorganization of CN monomers at the interface of two non-miscible solvents. Molecular dynamic simulations supported by experimental results reveal that an appropriate choice of monomers and solvents leads to the formation of a supramolecular assembly solely at the interface of the solvents. As a proof of concept, we show that the properties of the CN materials after thermal condensation can be tuned by adding an additional monomer to one solvent only. The advantages of the new method are demonstrated here through the tunable morphologies and surface area, the formation of new electronic junctions and high activity as a photocatalyst for hydrogen evolution and pollutant degradation of the CN materials.

Design of Robust Thermal and Anion Dual-Responsive Membranes with Switchable Response Temperature

In this study, poly(ionic liquids/ N-isopropylacrylamide) (PIL/NIPAM) modified poly(ether sulfone) microporous membranes were prepared using a pore-filling method. Due to the anion-sensitive wettability of the PIL and the thermal-sensitive phase transformation of PNIPAM, the permeability of the modified membranes showed robust anion and thermal dual-responsive behaviors. In addition, the response temperature of the membranes could be adjusted precisely from 30 to 55 °C by anion exchange, which was attributed to the cooperative interaction of the PIL and PNIPAM. The switchable response temperature and the dual-responsive performances of the membranes were demonstrated by measuring the water fluxes under various conditions. The results indicated that the membrane permeabilities increased when exchanging the counteranions (CAs) from hydrophilic to hydrophobic ones; the thermal response behaviors were also obvious, and the sensitivity increased when increasing the hydrophobicity of the CA (the fluxes could be adjusted from 0 to 3800 mL/m² mmHgh by controlling the temperature and CAs). At last, filtration tests were designed with the membranes, and the results indicated that by controlling the temperature and/or CA species, three different poly(ethylene glycol) molecules could be easily separated according to their molecule sizes in a single step.

Preparation of morphology-controllable PGMA-DVB microspheres by introducing Span 80 into seed emulsion polymerization

Microporous, hollow, or macroporous polymer spheres were prepared by a seed emulsion polymerisation method. Different from the conventional seeded emulsion polymerization, the sorbitan monooleate (Span 80) was added to the seeded emulsion polymerization. In this study, the monodisperse PS seeds prepared by dispersion polymerization were swelled by dibutyl phthalate (DBP), glycidyl methacrylate (GMA), divinylbenzene (DVB) and Span 80 successively. The effect of the amount of Span 80 on the morphology of microspheres was investigated. As different amount of Span 80 was added to the mixture, the poly(glycidyl methacrylate-divinylbenzene) (PGMA-DVB) microspheres showed a variety of morphologies containing microporous, hollow, and macroporous structure. In addition, uniform hollow particles with different pore size can be obtained through adjusting the amount of Span 80.

The obtained PGMA-DVB microspheres showed a variety of morphologies by adjusting the amount of Span 80 in the seeded emulsion polymerization.

Non-invasive strategies for targeting the posterior segment of eye

The safe and effective treatment of eye diseases has been remained a global myth. Several advancements have been done and various drug delivery and treatment techniques have been suggested. The Posterior segment disorders are the leading cause of visual impairments and blindness. Targeting the therapeutic agents to the anterior and posterior segments of the eye has attracted extensive attention from the scientific community. Significant key factors in the success of ocular therapy are the development of safe, effective, economic and non-invasive novel drug delivery systems. These specialized non-invasive ocular drug delivery systems revolutionized the drug delivery strategies by overcoming the limitations, provided targeted delivery to the ocular tissues by avoiding larger doses, and reducing the toxicity encountered by the conventional approaches. These non-invasive systems are fabricated by ingredients encompassing biodegradability, biocompatibility, mucoadhesion, solubility and permeability enhancement and stimuli responsiveness. The variety of routes are utilized to provide minimally invasive drug delivery to the patients without any discomfort and pain. This review is focused on the brief introduction, types, significance, preparation techniques, components and mechanism of drug release of non-invasive systems, including in situ gelling systems, microspheres, iontophoresis, nanoparticles, nanosuspensions and specialized novel emulsions.

Polystyrene-based Hollow Microsphere Synthesized by γ-ray Irradiation-assisted Polymerization and Self-Assembly and Its Application in Detection of Ionizing Radiation

To simply and multitudinously synthesize hollow microspheres in a pure system is important for relevant research and application. Here, a simple and novel one-pot synthetic strategy to prepare polystyrene (PS) hollow microspheres via irradiation-assisted free-radical polymerizing and self-assembly (IFPS) approach under γ-ray irradiation with no additives introduced into the system is presented. And PS/2,5-Diphenyloxazole (PPO) fluorescent microspheres have been prepared successfully by IFPS reaction, which can be used as scintillators for the detection of ionizing radiation. A linear relationship between emitted luminescence and dose-activity in water is obtained, which suggests that composite microspheres could be used as liquid scintillation in specific environment.

Interfacial synthesis of lollipop-like Au–polyaniline nanocomposites for catalytic applications

Lollipop-like Au–PANI nanocomposites show high catalytic activity for the reduction of 4-nitrophenol (4-NP) into 4-aminophenol (4-AP) and plasmon-driven conversion of 4-aminothiophenol (4ATP) into 4,4′-dimercaptoazobenzene (DMAB).

Inkjet printing based assembly of thermoresponsive core–shell polymer microcapsules for controlled drug release

A thermoresponsive polymer microcapsule with a hollow core–porous shell structure was fabricated based on inkjet printing, which can be used to control drug release by changing the temperature at around 38 °C.

Facile route to synthesis and morphology control of anionic waterborne polyurethane hollow microspheres via self-crosslinking reaction

Porous waterborne polyurethane (WPU) hollow microspheres were synthesized via a self-crosslinking reaction of WPU prepolymer terminated by 3-aminopropyltriethoxysilane (APTES).

Novel smart yolk/shell polymer microspheres as a multiply responsive cargo delivery system

An effective strategy was developed to fabricate the novel dually thermo- and pH-responsive yolk/shell polymer microspheres as a drug delivery system (DDS) for the controlled release of anticancer drugs via two-stage distillation precipitation polymerization and seed precipitation polymerization. Their pH-induced thermally responsive polymer shells act as a smart "valve" to adjust the diffusion of the loaded drugs in/out of the polymer containers according to the body environments, while the movable P(MAA-co-EGDMA) cores enhance the drug loading capacity for the anticancer drug doxorubicin hydrochloride (DOX). The yolk/shell polymer microspheres show a low leakage at high pH values but significantly enhanced release at lower pH values equivalent to the tumor body fluid environments at human body temperature, exhibiting the apparent tumor-environment-responsive controlled "on-off" drug release characteristics. Meanwhile, the yolk/shell microspheres expressed very low in vitro cytotoxicity on HepG2 cells. Consequently, their precise tumor-environment-responsive drug delivery performance and high drug loading capacity offer promise for tumor therapy.

Preparation and characterization of nanosized P(NIPAM-MBA) hydrogel particles and adsorption of bovine serum albumin on their surface

Thermosensitive polymer hydrogel particles with size varying from 480 to 620 nm were prepared through precipitation copolymerization of N-isopropylacrylamide with N,N'-methylenebisacrylamide (MBA) in water with ammonium persulfate as the initiator. Only polymer hydrogels without any coagula were obtained when MBA concentration in the monomer mixture was kept between 2.5 and 10.0 wt%; with increased MBA concentration, the monomer conversion was enhanced, the size of the hydrogels was increased, and their shrinking was lessened when heated from 25°C to 40°C. Bovine serum albumin adsorption on the surface of the hydrogels of different MBA content was measured at different pH levels and under different temperatures. The results demonstrated that the adsorption of the protein on the hydrogels could be controlled by adjusting the pH, the temperature of adsorption, and the crosslinking in the hydrogels. The results were interpreted, and the mechanisms of the polymerization were proposed.