A Biocompatible Method of Decorporation: Bisphosphonate-Modified Magnetite Nanoparticles to Remove Uranyl Ions from Blood

A Mitochondria-Targeted Heptamethine Indocyanine Small Molecular Chelator for Attenuating Uranium Nephrotoxicity

Radionuclide uranium has both a chemical and radioactive toxicity, leading to severe nephrotoxicity as it predominantly deposits itself in the kidneys after entering into human bodies. It crosses renal cell membranes, accumulates in mitochondria and causes mitochondrial oxidative damage and dysfunction. In this study, a mitochondria-targeted heptamethine indocyanine small molecule chelator modified with gallic acid (IR-82) is synthesized for uranium detoxication. Both gallic acid and sulfonic acid, as two hydrophilic endings, make IR-82, being excreted feasibly through kidneys. Gallic acid with polyphenol groups has a steady metal chelation effect and potent antioxidant ability, which may facilitate IR-82-alleviated uranium nephrotoxicity simultaneously by enhancing uranium decorporation from the kidneys and reducing mitochondrial oxidative damage. Cell viability assays demonstrate that IR-82 can significantly improve the cell viability of uranium-exposed human renal (HK-2) cells. It is also demonstrated to accumulate in mitochondria and reduce mitochondrial ROS and total intracellular ROS, as well as intracellular uranium content. In vivo imaging experiments in mice show that IR-82 could be excreted out through kidneys. ICP-MS tests further reveal that IR-82 can efficiently decrease the uranium deposition in mouse kidneys. IR-82 treatment improves the animal survival rate and renal function of experimental mice after high-dose uranium exposure. Collectively, our study may evidence that the development of uranium decorporation agents with kidney-mitochondrion dual targeting abilities is a promising strategy for attenuating uranium-induced nephrotoxicity.

Advances in functionalization and conjugation mechanisms of dendrimers with iron oxide magnetic nanoparticles

Iron oxide magnetic nanoparticles (MNPs) are crucial in various areas due to their unique magnetic properties. However, their practical use is often limited by instability and aggregation in aqueous solutions. This review explores the advanced technique of dendrimer functionalization to enhance MNP stability and expand their application potential. Dendrimers, with their symmetric and highly branched structure, effectively stabilize MNPs and provide tailored functional sites for specific applications. We summarize key synthetic modifications, focusing on the impacts of dendrimer size, surface chemistry, and the balance of chemical (e.g., coordination, anchoring) and physical (e.g., electrostatic, hydrophobic) interactions on nanocomposite properties. Current challenges such as dendrimer toxicity, control over dendrimer distribution on MNPs, and the need for biocompatibility are discussed, alongside potential solutions involving advanced characterization techniques. This review highlights significant opportunities in environmental, biomedical, and water treatment applications, stressing the necessity for ongoing research to fully leverage dendrimer-functionalized MNPs. Insights offered here aim to guide further development and application of these promising nanocomposites.

Perilla frutescens: A new strategy for uranium decorporation

Radionuclide uranium is a great threat to human health, due to its high chemical toxicity and radioactivity. Finding suitable uranium decorporation to reduce damage caused by uranium internal contamination is an important aspect of nuclear emergency response. However, the poor selectivity and/or high toxicity of the only excretory promoter approved by Food and Drug Administration (FDA) is an obvious disadvantage. Herein, we choose an edible natural product, the traditional Chinese medicine called Perilla frutescens (PF), which has wide sources and can be used as an excellent and effective uranyl decorporation. In vivo uranium decorporation assays illustrate the removal efficiency of uranium in kidney were 68.87% and 43.26%, in femur were 56.66% and 54.53%, by the test of prophylactic and immediate administration, respectively. Cell level experiments confirmed that it had better biocompatibility than CaNa3-DTPA (CaNa3-diethylenetriamine pentaacetate, a commercial actinide excretion agent). In vitro static adsorption experiments exhibited that its excellent selectivity sorption for uranyl. All those results findings would provide new research insights about natural product for uranyl decorporation.

α-Aminobisphosphonate Copolymers Based on Poly(ε-caprolactone)s and Poly(ethylene glycol): A New Opportunity for Actinide Complexation

Original α-aminobisphosphonate-based copolymers were synthesized and successfully used for actinide complexation. For this purpose, poly(α-chloro-ε-caprolactone-co-ε-caprolactone)-b-poly(ethylene glycol)-b-poly(α-chloro-ε-caprolactone-co-ε-caprolactone) copolymers were first prepared by ring-opening copolymerization of ε-caprolactone (εCL) and α-chloro-ε-caprolactone using poly(ethylene glycol) (PEG) as a macro-initiator and tin(II) octanoate as a catalyst. The chloride functions were then converted to azide moieties by chemical modification, and finally α-aminobisphosphonate alkyne ligand (TzBP) was grafted using click chemistry, to afford well-defined poly(αTzBPεCL-co-εCL)-b-PEG-b-poly(αTzBPεCL-co-εCL) copolymers. Three copolymers, showing different α-aminobisphosphonate group ratios, were prepared (7, 18, and 38%), namely, CP8, CP9, and CP10, respectively. They were characterized by 1H and 31P NMR and size exclusion chromatography. Sorption properties of these copolymers were evaluated by isothermal titration calorimetry (ITC) with neodymium [Nd(III)] and cerium [Ce(III)] cations, used as surrogates of actinides, especially uranium and plutonium, respectively. ITC enabled the determination of the full thermodynamic profile and the calculation of the complete set of thermodynamic parameter (ΔH, TΔS, and ΔG), with the Ka constant and the n stoichiometry. The results showed that the number of cations sorbed by the functional copolymers logically increased with the number of bisphosphonate functions borne by the macromolecular chain, independently of the complexed cation. Additionally, CP9 and CP10 copolymers showed higher sorption capacities [21.4 and 34.0 mg·g-1 for Nd(III) and 9.6 and 14.3 mg·g-1 for Ce(III), respectively] than most of the systems previously described in the literature. CP9 also showed a highest binding constant (7000 M-1). These copolymers, based on non-toxic and biocompatible poly(ε-caprolactone) and PEG, are of great interest for external body decontamination of actinides as they combine high number of complexing groups, thus leading to great decontamination efficiency, and limited diffusion through the skin due to their high-molecular weight, thus avoiding additional possible internal contamination.

Organic Phase-Soluble Nanomagnetically Cationic Phospholipid: Synthesis, Characterization, and In Vitro Transfection Activity

The presented work describes the synthesis and characterization of a novel magnetic cationic phospholipid (MCP) system with a stable dopamine anchor as well as its transfection activity study. The synthesized architectural system increases the biocompatibility of iron oxide and promises applications of magnetic nanoparticles in living cells. The MCP system is soluble in organic solvents and can be easily adapted to prepare magnetic liposomes. We created complexes with liposomes containing MCP and other functional cationic lipids and pDNA as gene delivery tools, which possessed the ability to enhance the efficiency of transfection, particularly the process of interaction with cells by inducing a magnetic field. The MCP is able to create iron oxide nanoparticles and has the potential for the materials to prepare the system for site-specific gene delivery with the application of an external magnetic field.

A facile aqueous production of bisphosphonated-polyelectrolyte functionalized magnetite nanoparticles for pH-specific targeting of acidic-bone cells

Bone malignancy treatment is being hindered due to the insufficient selectivity of therapeutic nanoparticles towards malignant bone sites. Polyelectrolyte functionalized magnetic nanoparticles having dually specific pH-sensing ability and bisphosphonate moieties, can be an effective solution for selective targeting of bone malignancies. First, polyelectrolyte was prepared via N-carboxycitraconyzation of chitosan (NCCS) followed by successive functionalization with alendronic acid (AL) and fluorescein isothiocyanate (FITC). Then, Fe3O4-NCCS-FITC-AL nanoparticles were synthesized by a facile one-step microwave-assisted aqueous method via in situ surface functionalization. The formation, crystal structure, and surface conjugation of Fe3O4 nanoparticles with polyelectrolytic stabilizer were confirmed by Fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analyses. Synthesized Fe3O4-NCCS-FITC-AL nanoparticles were superparamagnetic, colloidally stable and highly hemocompatible under physiological conditions. Moreover, at pH 5.0, Fe3O4-NCCS-FITC-AL nanoparticles formed a precipitate due to inversion of their surface charge. This pH-dependent charge-inversion drastically changed the interactions with erythrocytes and bones. Selective membranolysis of erythrocytes occurred at pH 5.0. The designed nanoparticles showed enough potential for selective targeting of pathological bone sites in early-stage magnetofluorescent imaging and as a therapeutics carrier to treat malignant bone diseases.

Nanotherapies for sepsis by regulating inflammatory signals and reactive oxygen and nitrogen species: New insight for treating COVID-19

SARS-CoV-2 has caused up to 127 million cases of COVID-19. Approximately 5% of COVID-19 patients develop severe illness, and approximately 40% of those with severe illness eventually die, corresponding to more than 2.78 million people. The pathological characteristics of COVID-19 resemble typical sepsis, and severe COVID-19 has been identified as viral sepsis. Progress in sepsis research is important for improving the clinical care of these patients. Recent advances in understanding the pathogenesis of sepsis have led to the view that an uncontrolled inflammatory response and oxidative stress are core factors. However, in the traditional treatment of sepsis, it is difficult to achieve a balance between the inflammation, pathogens (viruses, bacteria, and fungi), and patient tolerance, resulting in high mortality of patients with sepsis. In recent years, nanomaterials mediating reactive oxygen and nitrogen species (RONS) and the inflammatory response have shown previously unattainable therapeutic effects on sepsis. Despite these advantages, RONS and inflammatory response-based nanomaterials have yet to be extensively adopted as sepsis therapy. To the best of our knowledge, no review has yet discussed the pathogenesis of sepsis and the application of nanomaterials. To help bridge this gap, we discuss the pathogenesis of sepsis related to inflammation and the overproduction RONS, which activate pathogen-associated molecular pattern (PAMP)-pattern recognition receptor (PRR) and damage-associated molecular pattern (DAMP)-PRR signaling pathways. We also summarize the application of nanomaterials in the treatment of sepsis. As highlighted here, this strategy could synergistically improve the therapeutic efficacy against both RONS and inflammation in sepsis and may prolong survival. Current challenges and future developments for sepsis treatment are also summarized.

Empowering the Medicinal Applications of Bisphosphonates by Unveiling their Synthesis Details

Bisphosphonates (BPs), well-known medicinal compounds used for osteoporosis management, are currently the target of intensive research, from basic pre-formulation studies to more advanced stages of clinical practice. The high demand by the pharmaceutical industry inherently requires an easy, efficient and quick preparation of BPs. Current synthetic procedures are, however, still far from ideal. This work presents a comprehensive compilation of reports on the synthesis of the commercially available bisphosphonates that are pharmaceutical active ingredients. Current limitations to the conventional synthesis are assessed, and paths towards their improvement are described, either through the use of alternative solvents and/or by selecting appropriate ratios of the reactants. Innovative processes, such as microwave-assisted synthesis, are presented as more environmental-friendly and effective methods. The main advantages and setbacks of all syntheses are provided as a way to clarify and promote the development of simpler and improved procedures. Only in this way one will be able to efficiently respond to the future high demand of BPs, mostly due to the increase in life span in occidental countries.

Design of Functional Magnetic Nanocomposites for Bioseparation

Magnetic materials have been widely used in bioseparation in recent years due to their good biocompatibility, magnetic properties, and high binding capacity. In this review, we provide a brief introduction on the preparation and bioseparation applications of magnetic materials including the synthesis and surface modification of magnetic nanoparticles as well as the preparation and applications of magnetic nanocomposites in the separation of proteins, peptides, cells, exosomes and blood. The current limitations and remaining challenges in the fabrication process of magnetic materials for bioseparation will be also detailed.

Nanomaterials and nanocomposite applications in veterinary medicine

Nowadays, nanotechnology has made huge, significant advancements in biotechnology and biomedicine related to human and animal science, including increasing health safety, production, and the elevation of national income. There are various fields of nanomaterial applications in veterinary medicine such as efficient diagnostic and therapeutic tools, drug delivery, animal nutrition, breeding and reproduction, and valuable additives. Additional benefits include the detection of pathogens, protein, biological molecules, antimicrobial agents, feeding additives, nutrient delivery, and reproductive aids. There are many nanomaterials and nanocomposites that can be used in nanomedicine such as metal nanoparticles, liposomes, carbon nanotubes, and quantum dots. In the near future, nanotechnology research will have the ability to produce novel tools for improving animal health and production. Therefore, this chapter was undertaken to spotlight novel methods created by nanotechnology for application in the improvement of animal health and production. In addition, the toxicity of nanomaterials is fully discussed to avoid the suspected health hazards of toxicity for animal health safety.

A review on nanomaterial-based electrochemical, optical, photoacoustic and magnetoelastic methods for determination of uranyl cation

This review (with 177 refs) gives an overview on nanomaterial-based methods for the determination of uranyl ion (UO₂²⁺) by different types of transducers. Following an introduction into the field, a first large section covers the fundamentals of selective recognition of uranyl ion by receptors such as antibodies, aptamers, DNAzymes, peptides, microorganisms, organic ionophores (such as salophens, catechols, phenanthrolines, annulenes, benzo-substituted macrocyclic diamides, organophosphorus receptors, calixarenes, crown ethers, cryptands and β-diketones), by ion imprinted polymers, and by functionalized nanomaterials. A second large section covers the various kinds of nanomaterials (NMs) used, specifically on NMs for electrochemical signal amplification, on NMs acting as signal tags or carriers for signal tags, on fluorescent NMs, on NMs for colorimetric assays, on light scattering NMs, on NMs for surface enhanced Raman scattering (SERS)-based assays and wireless magnetoelastic detection systems. We then discuss detection strategies, with subsections on electrochemical methods (including ion-selective and potentiometric systems, voltammetric systems and impedimetric systems). Further sections treat colorimetric, fluorometric, resonance light scattering-based, SERS-based and photoacoustic methods, and wireless magnetoelastic detection. The current state of the art is summarized, and current challenges are discussed at the end. Graphical abstract An overview is given on nanomaterial-based methods for the detection of uranyl ion by different types of transducers (such as electrochemical, optical, photoacoustic, magnetoelastic, etc) along with a critical discussion of their limitations, benefits and application to real samples.

Evaluating the Effect of Shear Stress on Graft-To Zwitterionic Polycarboxybetaine Coating Stability Using a Flow Cell

The effect of surface coatings on the performance of antifouling activity under flow can be influenced by the flow/coating interactions. This study evaluates the effect of surface coatings on antifouling activity under different flows for the analyses of coating stability. This was done by exposing DOPA-PCB-300/dopamine coated polydimethylsiloxane (PDMS) to physiological shear stresses using a recirculation system which consisted of dual chamber acrylic flow cells, tygon tubing, flow probe and meter, and perfusion pumps. The effect of shear stress induced by phosphate buffered saline flow on coating stability was characterized with differences in fibrinogen adsorption between control (coated PDMS not loaded with shear stress) and coated samples loaded with various shear stresses. Fibrinogen adsorption data showed that relative adsorption on coated PDMS that were not exposed to shear (5.73% ± 1.97%) was significantly lower than uncoated PDMS (100%, p < 0.001). Furthermore, this fouling level, although lower, was not significantly different from coated PDMS membranes that were exposed to 1 dyn/cm² (9.55% ± 0.09%, p = 0.23), 6 dyn/cm² (15.92% ± 10.88%, p = 0.14), and 10 dyn/cm² (21.62% ± 13.68%, p = 0.08). Our results show that DOPA-PCB-300/dopamine coatings are stable, with minimal erosion, under shear stresses tested. The techniques from this fundamental study may be used to determine the limits of stability of coatings in long-term experiments.

Advection Flows-Enhanced Magnetic Separation for High-Throughput Bacteria Separation from Undiluted Whole Blood

A major challenge to scale up a microfluidic magnetic separator for extracorporeal blood cleansing applications is to overcome low magnetic drag velocity caused by viscous blood components interfering with magnetophoresis. Therefore, there is an unmet need to develop an effective method to position magnetic particles to the area of augmented magnetic flux density gradients while retaining clinically applicable throughput. Here, a magnetophoretic cell separation device, integrated with slanted ridge-arrays in a microfluidic channel, is reported. The slanted ridges patterned in the microfluidic channels generate spiral flows along the microfluidic channel. The cells bound with magnetic particles follow trajectories of the spiral streamlines and are repeatedly transferred in a transverse direction toward the area adjacent to a ferromagnetic nickel structure, where they are exposed to a highly augmented magnetic force of 7.68 µN that is much greater than the force (0.35 pN) at the side of the channel furthest from the nickel structure. With this approach, 91.68% ± 2.18% of Escherichia coli (E. coli) bound with magnetic nanoparticles are successfully separated from undiluted whole blood at a flow rate of 0.6 mL h^-1 in a single microfluidic channel, whereas only 23.98% ± 6.59% of E. coli are depleted in the conventional microfluidic device.

A novel alendronate functionalized nanoprobe for simple colorimetric detection of cancer-associated hypercalcemia

The calcium (Ca2+) ion concentration in the blood serum is tightly regulated, and any abnormalities in the level of serum calcium ions are associated with many potentially dangerous diseases. Thus, monitoring of the Ca2+ ion concentration in the blood serum is of fundamental importance. Gold nanoparticle (GNP)-based colorimetric biosensors have enormous potential in clinical diagnostic applications due to their simplicity, versatility, and unique optical properties. In this study, we have developed an alendronate functionalized gold nanoparticle (GNP-ALD) system for the measurement of Ca2+ ion concentration in biological samples. The GNP-ALD system showed higher sensitivity towards the Ca2+ ion compared to adenosine diphosphate (ADP) or adenosine triphosphate (ATP). The strong interaction between the Ca2+ ion and ALD at the GNP/solution interface resulted in significant aggregation of the ALD conjugated GNPs, and induced a color change of the solution from red to blue, which could be visually observed with the naked eye. The interaction between the Ca2+ ion and GNP-ALD was characterized by UV-visible spectroscopy, transmission electron microscopy (TEM) imaging, and dynamic light scattering (DLS) analysis. Under the optimized conditions, the lower limit of Ca2+ ion detection using this method was found to be 25 μM and a linear response range from 25 μM to 300 μM Ca2+ ions was obtained with excellent discrimination against other metal ions. The GNP-ALD nanoprobe could successfully determine the ionized Ca2+ concentration in various serum samples and the results were validated using a commercial calcium assay kit. Moreover, as a practical application, we demonstrated the utility of this nanoprobe for the detection of cancer-associated hypercalcemia in a mouse model.

Computational modeling and fluorescence microscopy characterization of a two-phase magnetophoretic microsystem for continuous-flow blood detoxification

Magnetic beads can be functionalized to capture and separate target pathogens from blood for extracorporeal detoxification. The beads can be magnetically separated from a blood stream and collected into a coflowing buffer solution using a two-phase liquid-liquid continuous-flow microfluidic device in the presence of an external field. However, device design and process optimization, i.e. high bead recovery with minimum blood loss or dilution remain a substantial technological challenge. We introduce a CFD-based Eulerian-Lagrangian computational model that enables the rational design and optimization of such systems. The model takes into account dominant magnetic and hydrodynamic forces on the beads as well as coupled bead-fluid interactions. Fluid flow (Navier-Stokes equations) and mass transfer (Fick's law) between the coflowing fluids are solved numerically, while the magnetic force on the beads is predicted using analytical methods. The model is demonstrated via application to a prototype device and used to predict key performance metrics; degree of bead separation, flow patterns, and mass transfer, i.e. blood diffusion to the buffer phase. The impact of different process variables and parameters - flow rates, bead and magnet dimensions and fluid viscosities - on both bead recovery and blood loss or dilution is quantified for the first time. The performance of the prototype device is characterized using fluorescence microscopy and the experimental results are found to match theoretical predictions within an absolute error of 15%. While the model is demonstrated here for analysis of a detoxification device, it can be readily adapted to a broad range of magnetically-enabled microfluidic applications, e.g. bioseparation, sorting and sensing.

Porous 3D Prussian blue/cellulose aerogel as a decorporation agent for removal of ingested cesium from the gastrointestinal tract

In the present study, we successfully synthesized a porous three-dimensional Prussian blue-cellulose aerogel (PB-CA) composite and used it as a decorporation agent for the selective removal of ingested cesium ions (Cs⁺) from the gastrointestinal (GI) tract. The safety of the PB-CA composite was evaluated through an in vitro cytotoxicity study using macrophage-like THP-1 cells and Caco-2 intestinal epithelial cells. The results revealed that the PB-CA composite was not cytotoxic. An adsorption study to examine the efficiency of the decorporation agent was conducted using a simulated intestinal fluid (SIF). The adsorption isotherm was fitted to the Langmuir model with a maximum Cs⁺ adsorption capacity of 13.70 mg/g in SIF that followed pseudo-second-order kinetics. The PB-CA composite showed excellent stability in SIF with a maximum Cs⁺ removal efficiency of 99.43%. The promising safety toxicology profile, remarkable Cs⁺ adsorption efficacy, and excellent stability of the composite demonstrated its great potential for use as an orally administered drug for the decorporation of Cs⁺ from the GI tract.

Polymer architecture of magnetic gels: a review

In this review article, we provide an introduction to ferrogels, i.e. polymeric gels with embedded magnetic particles. Due to the interplay between magnetic and elastic properties of these materials, they are promising candidates for engineering and biomedical applications such as actuation and controlled drug release. Particular emphasis will be put on the polymer architecture of magnetic gels since it controls the degrees of freedom of the magnetic particles in the gel, and it is important for the particle-polymer coupling determining the mechanisms available for the gel deformation in magnetic fields. We report on the different polymer architectures that have been realized so far, and provide an overview of synthesis strategies and experimental techniques for the characterization of these materials. We further focus on theoretical and simulational studies carried out on magnetic gels, and highlight their contributions towards understanding the influence of the gels' polymer architecture.

Magnetite-based adsorbents for sequestration of radionuclides: a review

As a result of extensive research efforts by several research groups, magnetite-based materials have gained enormous attention in diverse fields including biomedicine, catalysis, energy and data storage devices, magnetic resonance imaging, and environmental remediation. Owing to their low production cost, ease of modification, biocompatibility, and superparamagnetism, the use of these materials for the abatement of environmental toxicants has been increasing continuously. Here we focus on the recent advances in the use of magnetite-based adsorbents for removal of radionuclides (such as 137Cs(i), 155Eu(iii), 90Sr(ii), 238U(vi), etc.) from diverse aqueous phases. This review summarizes the preparation and surface modification of magnetite-based adsorbents, their physicochemical properties, adsorption behavior and mechanism, and diverse conventional and recent environmental technological options for the treatment of water contaminated with radionuclides. In addition, case studies for the removal of radionuclides from actual contaminated sites are discussed, and finally the optimization of magnetite-based remedial solutions is presented for practical application.

Phosphonic acid: preparation and applications

The phosphonic acid functional group, which is characterized by a phosphorus atom bonded to three oxygen atoms (two hydroxy groups and one P=O double bond) and one carbon atom, is employed for many applications due to its structural analogy with the phosphate moiety or to its coordination or supramolecular properties. Phosphonic acids were used for their bioactive properties (drug, pro-drug), for bone targeting, for the design of supramolecular or hybrid materials, for the functionalization of surfaces, for analytical purposes, for medical imaging or as phosphoantigen. These applications are covering a large panel of research fields including chemistry, biology and physics thus making the synthesis of phosphonic acids a determinant question for numerous research projects. This review gives, first, an overview of the different fields of application of phosphonic acids that are illustrated with studies mainly selected over the last 20 years. Further, this review reports the different methods that can be used for the synthesis of phosphonic acids from dialkyl or diaryl phosphonate, from dichlorophosphine or dichlorophosphine oxide, from phosphonodiamide, or by oxidation of phosphinic acid. Direct methods that make use of phosphorous acid (H3PO3) and that produce a phosphonic acid functional group simultaneously to the formation of the P-C bond, are also surveyed. Among all these methods, the dealkylation of dialkyl phosphonates under either acidic conditions (HCl) or using the McKenna procedure (a two-step reaction that makes use of bromotrimethylsilane followed by methanolysis) constitute the best methods to prepare phosphonic acids.

Removal of Cells from Body Fluids by Magnetic Separation in Batch and Continuous Mode: Influence of Bead Size, Concentration, and Contact Time

The magnetic separation of pathogenic compounds from body fluids is an appealing therapeutic concept. Recently, removal of a diverse array of pathogens has been demonstrated using extracorporeal dialysis-type devices. The contact time between the fluid and the magnetic beads in such devices is limited to a few minutes. This poses challenges, particularly if large compounds such as bacteria or cells need to be removed. Here, we report on the feasibility to remove cells from body fluids in a continuous dialysis type of setting. We assessed tumor cell removal efficiencies from physiological fluids with or without white blood cells using a range of different magnetic bead sizes (50-4000 nm), concentrations, and contact times. We show that tumor cells can be quantitatively removed from body fluids within acceptable times (1-2 min) and bead concentrations (0.2 mg per mL). We further present a mathematical model to describe the minimal bead number concentration needed to remove a certain number of cells, in the presence of competing nonspecific uptake. The present study paves the way for investigational studies to assess the therapeutic potential of cell removal by magnetic blood purification in a dialysis-like setting.

Multiplexible Wash-Free Immunoassay Using Colloidal Assemblies of Magnetic and Photoluminescent Nanoparticles

Colloidal assemblies of nanoparticles possess both the intrinsic and collective properties of their constituent nanoparticles, which are useful in applications where ordinary nanoparticles are not well suited. Here, we report an immunoassay technique based on colloidal nanoparticle assemblies made of iron oxide nanoparticles (magnetic substrate) and manganese-doped zinc sulfide (ZnS:Mn) nanoparticles (photoluminescent substrate), both of which are functionalized with antibodies to capture target proteins in a sandwich assay format. After magnetic isolation of the iron oxide nanoparticle assemblies and their bound ZnS:Mn nanoparticle assemblies (MZSNAs), photoluminescence of the remaining MZSNAs is measured for the protein quantification, eliminating the need for washing steps and signal amplification. Using human C-reactive protein as a model biomarker, we achieve a detection limit of as low as 0.7 pg/mL, which is more than 1 order of magnitude lower than that of enzyme-linked immunosorbent assay (9.1 pg/mL) performed using the same pair of antibodies, while using only one-tenth of the antibodies. We also confirm the potential for multiplex detection by using two different types of photoluminescent colloidal nanoparticle assemblies simultaneously.

Measurement and Surface Complexation Modeling of U(VI) Adsorption to Engineered Iron Oxide Nanoparticles

Surface-functionalized magnetite nanoparticles have high capacity for U(VI) adsorption and can be easily separated from the aqueous phase by applying a magnetic field. A surface-engineered bilayer structure enables the stabilization of nanoparticles in aqueous solution. Functional groups in stearic acid (SA), oleic acid (OA), and octadecylphosphonic acid (ODP) coatings led to different adsorption extents (SA≈ OA > ODP) under the same conditions. The impact of water chemistry (initial loading of U(VI), pH, and the presence of carbonate) has been systematically examined for U(VI) adsorption to OA-coated nanoparticles. A diffuse double layer surface complexation model was developed for surface-functionalized magnetite nanoparticles that could simulate both the measured surface charge and the U(VI) adsorption behavior at the same time. With a small set of adsorption reactions for uranyl hydroxide and uranyl carbonate complexes to surface sites, the model can successfully simulate the entire adsorption data set over all uranium loadings, pH values, and dissolved inorganic carbon concentrations. The results show that the adsorption behavior was related to the changing U(VI) species and properties of surface coatings on nanoparticles. The model could also fit pH-dependent surface potential values that are consistent with measured zeta potentials.

Rapid extraction of uranium from sea water using Fe3O4 and humic acid coated Fe3O4 nanoparticles

Uranium is one of the most toxic elements present in the environment and a number of methods have been developed for its extraction. Herein we have demonstrated a new method using magnetic nanoparticles (NPs) that can be used for uranium extraction from water and sea water matrix. Fe₃O₄ and humic acid (HA) coated Fe₃O₄ NPs with different amount of HA coating were synthesized and uranium sorption from water and sea water matrix was demonstrated. It was observed that sorption increases with increase in amount of HA coating. NPs settlement in presence of magnetic field was monitored where only bare Fe₃O₄ and Fe₃O₄/HA 1 NPs settles while no settlement was observed for Fe₃O₄/HA 2 and Fe₃O₄/HA 3 NPs. Considering both sorption and particle separation from the matrix Fe₃O₄/HA 1 NPs are the best among synthesized ones with maximum sorption capacity of 10.5mg of U/g of NPs. The results presented here reveal the exceptional potential of magnetic NPs and functionalized magnetic NPs for environmental remediation of uranium and to extract uranium from sea water on which to the best of our knowledge no report is available till now.

Cesium Removal from Human Blood by Poly(ethylene glycol)-Decorated Prussian Blue Magnetic Nanoparticles

The current oral administration of drugs for cesium (Cs) decorporation treatment are often subject to side effects and low efficiency. Therefore, it is of great significance, yet challenging, to develop novel materials and techniques for efficient removal of Cs from the human body. We report herein a new method for directly removing cesium from blood by poly(ethylene glycol)-decorated Prussian blue magnetic nanoparticles (PEG-PB MNs). The nanoparticles have been successfully synthesized by one-pot hydrothermal reaction. The adsorption of cesium in aqueous solution is a highly selective process and kinetically follows a pseudo-second-order model, which can reach equilibrium with a large capacity of 274.7 mg Cs g^-1 within one hour at 298.15 K. PEG-PB MNs were also efficiently regenerated and reused with high adsorption efficiency after five cycles. The nanoparticles successfully removed cesium ions from human blood with improved biocompatibility. The removal efficiency achieved 64 % in the blood with an initial Cs concentration of 168.4 ppb. This study provides a new approach to directly remove cesium ions from the human body by utilizing biocompatible Prussian blue magnetic nanoparticles.

Engineering Nanoscale Iron Oxides for Uranyl Sorption and Separation: Optimization of Particle Core Size and Bilayer Surface Coatings

Herein, we describe engineered superparamagnetic iron oxide nanoparticles (IONPs) as platform materials for enhanced uranyl (UO₂²⁺) sorption and separation processes under environmentally relevant conditions. Specifically, monodispersed 8-25 nm iron oxide (magnetite, Fe₃O₄) nanoparticles with tailored organic acid bilayered coatings have been systematically evaluated and optimized to bind, and thus remove, uranium from water. The combined nonhydrolytic synthesis and bilayer phase transfer material preparation methods yield highly uniform and surface tailorable IONPs, which allow for direct evaluation of the size-dependent and coating-dependent sorption capacities of IONPs. Optimized materials demonstrate ultrahigh sorption capacities (>50% by wt/wt) at pH 5.6 for 8 nm oleic acid (OA) bilayer and sodium monododecyl phosphate (SDP) surface-stabilized IONPs. Synchrotron-based X-ray absorption spectroscopy shows that iron oxide core particle size and stabilizing surface functional group(s) substantially affect U(VI)-removal mechanisms, specifically the ratio of uptake via adsorption versus reduction to U(IV). Taken together, tunable size and surface functionality, high colloidal stability, and favorable affinity toward uranium provide distinct synergistic advantage(s) for the application of bilayered IONPs as part of the next-generation material-based uranium recovery, remediation, and sensing technologies.

Physico-chemical characteristics, biocompatibility, and MRI applicability of novel monodisperse PEG-modified magnetic Fe3O4&SiO2 core–shell nanoparticles

Biocompatible monodisperse PEG-modified magnetic Fe₃O₄&SiO₂ core–shell nanoparticles with controlled size provided sufficient contrast for magnetic resonance imaging (MRI).

Synthetic Procedures Leading towards Aminobisphosphonates

Growing interest in the biological activity of aminobisphosphonates has stimulated the development of methods for their synthesis. Although several general procedures were previously elaborated to reach this goal, aminobisphosphonate chemistry is still developing quite substantially. Thus, innovative modifications of the existing commonly used reactions, as well as development of new procedures, are presented in this review, concentrating on recent achievements. Additionally, selected examples of aminobisphosphonate derivatization illustrate their usefulness for obtaining new diagnostic and therapeutic agents.

Luteinizing Hormone Releasing Hormone-Targeted Cisplatin-Loaded Magnetite Nanoclusters for Simultaneous MR Imaging and Chemotherapy of Ovarian Cancer

Given the superior soft tissue contrasts obtained by MRI and the long residence times of magnetic nanoparticles (MNPs) in soft tissues, MNP-based theranostic systems are being developed for simultaneous imaging and treatment. However, development of such theranostic nanoformulations presents significant challenges of balancing the therapeutic and diagnostic functionalities in order to achieve optimum effect from both. Here we developed a simple theranostic nanoformulation based on magnetic nanoclusters (MNCs) stabilized by a bisphosphonate-modified poly(glutamic acid)-b-(ethylene glycol) block copolymer and complexed with cisplatin. The MNCs were decorated with luteinizing hormone releasing hormone (LHRH) to target LHRH receptors (LHRHr) overexpressed in ovarian cancer cells. The targeted MNCs significantly improved the uptake of the drug in cancer cells and decreased its IC50 compared to the nontargeted formulations. Also, the enhanced LHRHr-mediated uptake of the targeted MNCs resulted in enhancement in the T2-weighted negative contrast in cellular phantom gels. Taken together, the LHRH-conjugated MNCs show good potential as ovarian cancer theranostics.

Electrochemically-responsive magnetic nanoparticles for reversible protein adsorption

Electrochemically-responsive magnetic hybrid nanoparticles are designed and prepared to achieve electrochemically-controlled reversible separation of proteins.

Theranostic body fluid cleansing: rationally designed magnetic particles enable capturing and detection of bacterial pathogens

We show theoretical and experimental considerations on bacteria capturing and enrichment via magnetic separation enabling integrated diagnosis and treatment of blood stream infections.