Stitched α-helical peptides via bis ring-closing metathesis

Design-rules for stapled peptides with in vivo activity and their application to Mdm2/X antagonists

Although stapled α-helical peptides can address challenging targets, their advancement is impeded by poor understandings for making them cell permeable while avoiding off-target toxicities. By synthesizing >350 molecules, we present workflows for identifying stapled peptides against Mdm2(X) with in vivo activity and no off-target effects. Key insights include a clear correlation between lipophilicity and permeability, removal of positive charge to avoid off-target toxicities, judicious anionic residue placement to enhance solubility/behavior, optimization of C-terminal length/helicity to enhance potency, and optimization of staple type/number to avoid polypharmacology. Workflow application gives peptides with >292x improved cell proliferation potencies and no off-target cell proliferation effects ( > 3800x on-target index). Application of these 'design rules' to a distinct Mdm2(X) peptide series improves ( > 150x) cellular potencies and removes off-target toxicities. The outlined workflow should facilitate therapeutic impacts, especially for those targets such as Mdm2(X) that have hydrophobic interfaces and are targetable with a helical motif.

Structural flexibility of apolipoprotein E-derived arginine-rich peptides improves their cell penetration capability

Amphipathic arginine-rich peptide, A2-17, exhibits moderate perturbation of lipid membranes and the highest cell penetration among its structural isomers. We investigated the direct cell-membrane penetration mechanism of the A2-17 peptide while focusing on structural flexibility. We designed conformationally constrained versions of A2-17, stapled (StpA2-17) and stitched (StchA2-17), whose α-helical conformations were stabilized by chemical crosslinking. Circular dichroism confirmed that StpA2-17 and StchA2-17 had higher α-helix content than A2-17 in aqueous solution. Upon liposome binding, only A2-17 exhibited a coil-to-helix transition. Confocal microscopy revealed that A2-17 had higher cell penetration efficiency than StpA2-17, whereas StchA2-17 remained on the cell membrane without cell penetration. Although the tryptophan fluorescence analysis suggested that A2-17 and its analogs had similar membrane-insertion positions between the interface and hydrophobic core, StchA2-17 exhibited a higher membrane affinity than A2-17 or StpA2-17. Atomic force microscopy demonstrated that A2-17 reduced the mechanical rigidity of liposomes to a greater extent than StpA2-17 and StchA2-17. Finally, electrophysiological analysis showed that A2-17 induced a higher charge influx through transient pores in a planer lipid bilayer than StpA2-17 and StchA2-17. These findings indicate that structural flexibility, which enables diverse conformations of A2-17, leads to a membrane perturbation mode that contributes to cell membrane penetration.

Impact of chemical modifications on the antimicrobial and hemolytic activity of helical amphipathic peptide Lasioglossin LL-III

Insect venom is abundant in potential antimicrobial peptides (AMPs), which can serve as novel alternatives to conventional antibiotics. Among them, Lasioglossin III LL-III) is a promising candidate with a broad spectrum against many fungi strains and both types of bacteria, whereas almost non-toxic to red blood cells. Many chemical approaches have been recently applied to improve its pharmacological properties and provide useful information regarding structure-activity relationships. Hence, this review focused on highlighting the lesson learned from each modification and supporting the future design of potent, selective, and metabolically stable AMPs.

Structure-Based Design and Synthesis of Stapled 10Panx1 Analogues for Use in Cardiovascular Inflammatory Diseases

Following a rational design, a series of macrocyclic ("stapled") peptidomimetics of 10Panx1, the most established peptide inhibitor of Pannexin1 (Panx1) channels, were developed and synthesized. Two macrocyclic analogues SBL-PX1-42 and SBL-PX1-44 outperformed the linear native peptide. During in vitro adenosine triphosphate (ATP) release and Yo-Pro-1 uptake assays in a Panx1-expressing tumor cell line, both compounds were revealed to be promising bidirectional inhibitors of Panx1 channel function, able to induce a two-fold inhibition, as compared to the native 10Panx1 sequence. The introduction of triazole-based cross-links within the peptide backbones increased helical content and enhanced in vitro proteolytic stability in human plasma (>30-fold longer half-lives, compared to 10Panx1). In adhesion assays, a "double-stapled" peptide, SBL-PX1-206 inhibited ATP release from endothelial cells, thereby efficiently reducing THP-1 monocyte adhesion to a TNF-α-activated endothelial monolayer and making it a promising candidate for future in vivo investigations in animal models of cardiovascular inflammatory disease.

Peptide Stapling Applied to Antimicrobial Peptides

Antimicrobial peptides (AMPs) are considered a promising therapeutic approach against multi-drug resistant microorganisms. Besides their advantages, there are limitations to be overcome so that these molecules can become market competitive. One of the biggest limitations is proteolytic susceptibility, which could be overcome by structural modifications such as cyclization, especially for helix-constraining strategies. Over the years, many helix stabilization techniques have arisen, such as lactam-bridging, triazole-based, N-alkylation and all-hydrocarbon stapling. All-hydrocarbon stapling takes advantage of modified amino acid residues and olefinic cross-linking to constrain peptide helices. Despite being a well-established strategy and presenting efficient stability results, there are different limitations especially related to toxicity. In this review, recent studies on stapled AMPs for antimicrobial usage are explored with the aim of understanding the future of these molecules as putative antimicrobial agents.

Ultrashort All-Hydrocarbon Stapled α-Helix Amphiphile as a Potent and Stable Antimicrobial Compound

The ravaging effect of drug-resistant bacteria has heightened the need for the development of membrane-soluble antimicrobial peptides (AMPs). However, their potential for clinical use is hindered by issues such as poor biocompatibility, salt sensitivity, and proteolytic lability. In this study, a series of ultrashort stapled cyclization heptapeptides were obtained by inserting all-hydrocarbon staples. StRRL with the highest therapeutic index (TI = 36.3) was selected after evaluating its antibacterial and toxic activity. Furthermore, stRRL demonstrated exceptional performance in high-protease and high-salt environments, making it an effective weapon against bacteria like Escherichia coli in a mouse peritonitis-sepsis model. The membrane lytic mechanism of stRRL, which operates from outside to inside, gives it a low drug-resistant tendency. This suggests that stRRL has the potential to replace antibiotics as a powerful candidate in tackling bacterial infection. In conclusion, the ultrashort all-hydrocarbon stapled antimicrobial amphiphiles inaugurated a novel entrance to the advancements of highly stable peptide compounds.

Rationally designed stapled peptides allosterically inhibit PTBP1-RNA-binding

The diverse role of the splicing factor PTBP1 in human cells has been widely studied and was found to be a driver for several diseases. PTBP1 binds RNA through its RNA-recognition motifs which lack obvious pockets for inhibition. A unique transient helix has been described to be part of its first RNA-recognition motif and to be important for RNA binding. In this study, we further confirmed the role of this helix and envisioned its dynamic nature as a unique opportunity to develop stapled peptide inhibitors of PTBP1. The peptides were found to be able to inhibit RNA binding via fluorescence polarization assays and directly occupy the helix binding site as observed by protein crystallography. These cell-permeable inhibitors were validated in cellulo to alter the regulation of alternative splicing events regulated by PTBP1. Our study demonstrates transient secondary structures of a protein can be mimicked by stapled peptides to inhibit allosteric mechanisms.

Rational design of stapled antimicrobial peptides

The global increase in antimicrobial drug resistance has dramatically reduced the effectiveness of traditional antibiotics. Structurally diverse antibiotics are urgently needed to combat multiple-resistant bacterial infections. As part of innate immunity, antimicrobial peptides have been recognized as the most promising candidates because they comprise diverse sequences and mechanisms of action and have a relatively low induction rate of resistance. However, because of their low chemical stability, susceptibility to proteases, and high hemolytic effect, their usage is subject to many restrictions. Chemical modifications such as D-amino acid substitution, cyclization, and unnatural amino acid modification have been used to improve the stability of antimicrobial peptides for decades. Among them, a side-chain covalent bridge modification, the so-called stapled peptide, has attracted much attention. The stapled side-chain bridge stabilizes the secondary structure, induces protease resistance, and increases cell penetration and biological activity. Recent progress in computer-aided drug design and artificial intelligence methods has also been used in the design of stapled antimicrobial peptides and has led to the successful discovery of many prospective peptides. This article reviews the possible structure-activity relationships of stapled antimicrobial peptides, the physicochemical properties that influence their activity (such as net charge, hydrophobicity, helicity, and dipole moment), and computer-aided methods of stapled peptide design. Antimicrobial peptides under clinical trial: Pexiganan (NCT01594762, 2012-05-07). Omiganan (NCT02576847, 2015-10-13).

A glutamine-based single α-helix scaffold to target globular proteins

The binding of intrinsically disordered proteins to globular ones can require the folding of motifs into α-helices. These interactions offer opportunities for therapeutic intervention but their modulation with small molecules is challenging because they bury large surfaces. Linear peptides that display the residues that are key for binding can be targeted to globular proteins when they form stable helices, which in most cases requires their chemical modification. Here we present rules to design peptides that fold into single α-helices by instead concatenating glutamine side chain to main chain hydrogen bonds recently discovered in polyglutamine helices. The resulting peptides are uncharged, contain only natural amino acids, and their sequences can be optimized to interact with specific targets. Our results provide design rules to obtain single α-helices for a wide range of applications in protein engineering and drug design.

Biocompatible and Selective Generation of Bicyclic Peptides

Bicyclic peptides possess superior properties for drug discovery; however, their chemical synthesis is not straightforward and often neither biocompatible nor fully orthogonal to all canonical amino acids. The selective reaction between 1,2-aminothiols and 2,6-dicyanopyridine allows direct access to complex bicyclic peptides in high yield. The process can be fully automated using standard solid-phase peptide synthesis. Bicyclization occurs in water at physiological pH within minutes and without the need for a catalyst. The use of various linkers allows tailored bicyclic peptides with qualities such as plasma stability, conformational preorganization, and high target affinity. We demonstrate this for a bicyclic inhibitor of the Zika virus protease NS2B-NS3 as well as for bicyclic versions of the α-helical antimicrobial peptide aurein 1.2.

Strategies for Improving Peptide Stability and Delivery

Peptides play an important role in many fields, including immunology, medical diagnostics, and drug discovery, due to their high specificity and positive safety profile. However, for their delivery as active pharmaceutical ingredients, delivery vectors, or diagnostic imaging molecules, they suffer from two serious shortcomings: their poor metabolic stability and short half-life. Major research efforts are being invested to tackle those drawbacks, where structural modifications and novel delivery tactics have been developed to boost their ability to reach their targets as fully functional species. The benefit of selected technologies for enhancing the resistance of peptides against enzymatic degradation pathways and maximizing their therapeutic impact are also reviewed. Special note of cell-penetrating peptides as delivery vectors, as well as stapled modified peptides, which have demonstrated superior stability from their parent peptides, are reported.

Helix-Stabilized Cell-Penetrating Peptides for Delivery of Antisense Morpholino Oligomers: Relationships among Helicity, Cellular Uptake, and Antisense Activity

The secondary structures of cell-penetrating peptides (CPPs) influence their properties including their cell-membrane permeability, tolerability to proteases, and intracellular distribution. Herein, we developed helix-stabilized arginine-rich peptides containing α,α-disubstituted α-amino acids and their conjugates with antisense phosphorodiamidate morpholino oligomers (PMOs), to investigate the relationships among the helicity of the peptides, cellular uptake, and antisense activity of the peptide-conjugated PMOs. We demonstrated that helical CPPs can efficiently deliver the conjugated PMO into cells compared with nonhelical CPPs and that their antisense activities are synergistically enhanced in the presence of an endosomolytic reagent or an endosomal escape domain peptide.

An Orthogonal Dynamic Covalent Chemistry Tool for Ring-Opening Polymerization of Cyclic Oligochalcogenides on Detachable Helical Peptide Templates

A model system is introduced as a general tool to elaborate on orthogonal templation of dynamic covalent ring‐opening polymerization (ODC‐TROP). The tool consists of 3₁₀ helical peptides as unprecedented templates and semicarbazones as orthogonal dynamic covalent linkers. With difficult‐to‐control 1,2‐dithiolanes, ODC‐TROP on the level of short model oligomers occurs with high templation efficiency, increasing and diminishing upon helix stabilization and denaturation, respectively. Further, an anti‐templated conjugate with mispositioned monomers gave reduced templation upon helix twisting. Even with the “unpolymerizable” 1,2‐diselenolanes, initial studies already afford mild templation efficiency. These proof‐of‐principle results promise that the here introduced tool, recyclable and enabling late‐stage side chain modification, will be useful to realize ODC‐TROP of intractable or unknown cyclic dynamic covalent monomers for dynamer materials as well as cellular uptake and signaling applications.

Helical Foldamers and Stapled Peptides as New Modalities in Drug Discovery: Modulators of Protein-Protein Interactions

A “foldamer” is an artificial oligomeric molecule with a regular secondary or tertiary structure consisting of various building blocks. A “stapled peptide” is a peptide with stabilized secondary structures, in particular, helical structures by intramolecular covalent side-chain cross-linking. Helical foldamers and stapled peptides are potential drug candidates that can target protein-protein interactions because they enable multipoint molecular recognition, which is difficult to achieve with low-molecular-weight compounds. This mini-review describes a variety of peptide-based foldamers and stapled peptides with a view to their applications in drug discovery, including our recent progress.

Redesigning of Cell-Penetrating Peptides to Improve Their Efficacy as a Drug Delivery System

Cell-penetrating peptides (CPP) are promising tools for the transport of a broad range of compounds into cells. Since the discovery of the first members of this peptide family, many other peptides have been identified; nowadays, dozens of these peptides are known. These peptides sometimes have very different chemical–physical properties, but they have similar drawbacks; e.g., non-specific internalization, fast elimination from the body, intracellular/vesicular entrapment. Although our knowledge regarding the mechanism and structure–activity relationship of internalization is growing, the prediction and design of the cell-penetrating properties are challenging. In this review, we focus on the different modifications of well-known CPPs to avoid their drawbacks, as well as how these modifications may increase their internalization and/or change the mechanism of penetration.

Strategies employed in the design of antimicrobial peptides with enhanced proteolytic stability

Due to the alarming developing rate of multidrug-resistant bacterial pathogens, the development and modification of antimicrobial peptides (AMPs) are unprecedentedly active. Despite the fact that considerable efforts have been expended on the discovery and design strategies of AMPs, the clinical translation of peptide antibiotics remains inadequate. A large number of articles and reviews credited the limited success of AMPs to their poor stability in the biological environment, particularly their poor proteolytic stability. In the past forty years, various design strategies have been used to improve the proteolytic stability of AMPs, such as sequence modification, cyclization, peptidomimetics, and nanotechnology. Herein, we focus our discussion on the progress made in improving the proteolytic stability of AMPs and the principle, successes, and limitations of various anti-proteolytic design strategies. It is of prospective significance to extend current insights into the degradation-related inactivation of AMPs and also alleviate/overcome the problem.

Effect of hydrophobic moment on membrane interaction and cell penetration of apolipoprotein E-derived arginine-rich amphipathic α-helical peptides

We previously developed an amphipathic arginine-rich peptide, A2-17, which has high ability to directly penetrate across cell membranes. To understand the mechanism of the efficient cell-penetrating ability of the A2-17 peptide, we designed three structural isomers of A2-17 having different values of the hydrophobic moment and compared their membrane interaction and direct cell penetration. Confocal fluorescence microscopy revealed that cell penetration efficiency of peptides tends to increase with their hydrophobic moment, in which A2-17 L14R/R15L, an A2-17 isomer with the highest hydrophobic moment, predominantly remains on plasma cell membranes. Consistently, Trp fluorescence analysis indicated the deepest insertion of A2-17 L14R/R15L into lipid membranes among all A2-17 isomers. Electrophysiological analysis showed that the duration and charge flux of peptide-induced pores in lipid membranes were prominent for A2-17 L14R/R15L, indicating the formation of stable membrane pores. Indeed, the A2-17 L14R/R15L peptide exhibited the strongest membrane damage to CHO-K1 cells. Atomic force microscopy quantitatively defined the peptide-induced membrane perturbation as the decrease in the stiffness of lipid vesicles, which was correlated with the hydrophobic moment of all A2-17 isomers. These results indicate that optimal membrane perturbation by amphipathic A2-17 peptide is critical for its efficient penetration into cells without inducing stabilized membrane pores.

Functional stapled fragments of human preptin of minimised length

Preptin is a 34-amino-acid-long peptide derived from the E-domain of a precursor of insulin-like growth factor 2 (pro-IGF2) with bone-anabolic and insulin secretion amplifying properties. Here, we describe the synthesis, structures, and biological activities of six shortened analogues of human preptin. Eight- and nine-amino-acid-long peptide amides corresponding to the C-terminal part of human preptin were stabilised by two types of staples to induce a higher proportion of helicity in their secondary structure. We monitored the secondary structure of the stapled peptides using circular dichroism. The biological effect of the structural changes was determined afterwards by the ability of peptides to stimulate the release of intracellular calcium ions. We confirmed the previous observation that the stabilisation of the disordered conformation of human preptin has a deleterious effect on biological potency. However, surprisingly, one of our preptin analogues, a nonapeptide stabilised by olefin metathesis between positions 3 and 7 of the amino acid chain, had a similar ability to stimulate calcium ions' release to the full-length human preptin. Our findings could open up new ways to design new preptin analogues, which may have potential as drugs for the treatment of diabetes and osteoporosis.

Application of the All-Hydrocarbon Stapling Technique in the Design of Membrane-Active Peptides

The threats of drug resistance and new emerging pathogens have led to an urgent need to develop alternative treatment therapies. Recently, considerable research efforts have focused on membrane-active peptides (MAPs), a category of peptides in drug discovery with antimicrobial, anticancer, and cell penetration activities that have demonstrated their potential to be multifunctional agents. Nonetheless, natural MAPs have encountered various disadvantages, which mainly include poor bioavailability, the lack of a secondary structure in short peptides, and high production costs for long peptide sequences. Hence, an "all-hydrocarbon stapling system" has been applied to these peptides and proven to effectively stabilize the helical conformations, improving proteolytic resistance and increasing both the potency and the cell permeability. In this review, we summarized and categorized the advances made using this powerful technique in the development of stapled MAPs. Furthermore, outstanding issues and suggestions for future design within each subcategory were thoroughly discussed.

Head-to-Tail Cross-Linking to Generate Bicyclic Helical Peptides with Enhanced Helicity and Proteolytic Stability

We report a new pattern of a bicyclic helical peptide constructed through head-to-tail cross-linking. The described bicyclic helical peptide has a head-to-tail cross-linking arm and a C-terminal i, i + 4 cross-linking arm. This scaffold will provide a promising scaffold for designing a proteolytically resistant helix-constrained peptide.

Backbone distortions in lactam-bridged helical peptides

Side‐chain‐to‐side‐chain cyclization is frequently used to stabilize the α‐helical conformation of short peptides. In a previous study, we incorporated a lactam bridge between the side chains of Lys‐i and Asp‐i+4 in the nonapeptide 1Y, cyclo‐(2,6)‐(Ac‐VKRLQDLQY‐NH₂), an artificial ligand of the inhibitor of DNA binding and cell differentiation (ID) protein with antiproliferative activity on cancer cells. Herein, we show that only the cyclized five‐residue segment adopts a helical turn whereas the C‐terminal residues remain flexible. Moreover, we present nine 1Y analogs arising from different combinations of hydrophobic residues (leucine, isoleucine, norleucine, valine, and tyrosine) at positions 1, 4, 7, and 9. All cyclopeptides except one build a lactam‐bridged helical turn; however, residue‐4 reveals less helix character than the neighboring Arg‐3 and Gln‐5, especially with residue‐4 being isoleucine, valine, and tyrosine. Surprisingly, only two cyclopeptides exhibit helix propagation until the C‐terminus, whereas the others share a remarkable outward tilting of the backbone carbonyl of the lactam‐bridged Asp‐6 (>40° deviation from the orientation parallel to the helix axis), which prevents the formation of the H‐bond between Arg‐3 CO and residue‐7 NH: As a result, the propagation of the helix beyond the lactam‐bridged sequence becomes unfavorable. We conclude that, depending on the amino‐acid sequence, the lactam bridge between Lys‐i and Asp‐i+4 can stabilize a helical turn but deviations from the ideal helix geometry are possible: Indeed, besides the outward tilting of the backbone carbonyls, the residues per turn increased from 3.6 (typical of a regular α‐helix) to 4.2, suggesting a partial helix unwinding.

Rational Design of a Dual-Targeting Natural Toxin-Like Bicyclic Peptide for Selective Bioenergetic Blockage in Cancer Cells

Stapled α-helical peptides emerge as one of the attractive peptidomimetics which can efficiently penetrate the cell membrane to access intracellular targets. However, the incorporation of a highly lipophilic cross-link may lead to nonspecific membrane toxicity in certain cases. Here, we report a new class of thioether-tethered bicyclic α-helical peptide to mimic the highly constrained loop-helix structure of natural toxins with the dual-targeting ability for both cell-surface receptors and intracellular targets. The thioether cross-links are introduced to replace the redox-sensitive disulfide bonds in natural toxins via a photoinduced thiol-yne reaction followed by macrolactamization. As a proof of concept, αVβ3 integrin targeting ligand was grafted into one of the macrocycles in the bicyclic scaffold, while a mitochondria-targeting proapoptotic motif was introduced into the other macrocycle stabilized by an i, i + 7 alkyl thioether cross-link to recapitulate its α-helical conformation. The obtained dual-targeting bicyclic α-helical BIRK peptides showed highly stable α-helical conformation in the presence of denaturants or under high temperature. Notably, BIRK peptides could induce selective cell death in αVβ3 integrin-positive B16F10 cells by interfering with the bioenergetic functions of mitochondria. This work provides a new avenue to design and stabilize α-helical peptides in a highly constrained bicyclic loop-helix scaffold with dual functionality.

Solid-Phase Peptide Macrocyclization and Multifunctionalization via Dipyrrin Construction

We introduce a new and highly efficient synthetic protocol towards multifunctional fluorescent cyclopeptides by solid-phase peptide macrocyclization via dipyrrin construction, with full scope of proteinogenic amino acids and different ring sizes. Various bicyclic peptides can be created by dipyrrin-based crosslinking and double dipyrrin-ring formation. The embedded dipyrrin can be either transformed to fluorescent BODIPY and then utilized as cancer-selective targeted protein imaging probe in vitro, or directly employed as a selective metal sensor in aqueous media. This work provides a valuable addition to the peptide macrocyclization toolbox, and a blueprint for the development of multifunctional dipyrrin linkers in cyclopeptides for a wide range of potential bioapplications.

Rational Design of Helix-Stabilized Antimicrobial Peptide Foldamers Containing α,α-Disubstituted Amino Acids or Side-Chain Stapling

Antimicrobial peptides (AMPs) are expected to be good candidate molecules for novel antimicrobial therapies. Most AMPs exert their antimicrobial activity through disruption of microbial membranes due to their amphipathic properties. Recently, the helical peptide 'Stripe' was reported by our group, a rationally designed amphipathic AMP focused on distribution of natural cationic and hydrophobic amino acid residues. In this study, a set of Stripe-based AMP foldamers was designed, synthesized and investigated that contain α,α-disubstituted amino acids or side-chain stapling to stabilize their helical structures. Our results showed that a peptide containing 2-aminoisobutyric acid (Aib) residues exhibited potent antimicrobial activity against both Gram-positive S.aureus (MIC value: 3.125 μM) and Gram-negative bacteria (including a multidrug-resistant strain, MDRP, MIC value: 1.56 μM), without significant hemolytic activity (>100 μM). Electrophysiological measurements revealed that this peptide formed stable pores in a 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE)/1,2-dioleoyl-sn-glycero-3-phosphoglycerol (DOPG) bilayer but not in a dioleoylphosphocholine (DOPC) bilayer. The introduction of Aib residues into Stripe could be a promising way to increase the antimicrobial activity of AMP foldamers, and the peptide could represent a promising novel therapeutic candidate to treat multidrug-resistant bacterial infection.

Rational design of a stapled JAZ9 peptide inhibiting protein-protein interaction of a plant transcription factor

We herein describe the development of a stapled peptide inhibitor for a jasmonate-related transcription factor. The designed peptide selectively inhibited MYCs, master-regulators of jasmonate signaling, and selectively suppressed MYC-mediated gene expression in Arabidopsis thaliana. It is proposed as a novel chemical tool for the analysis of MYC related jasmoante signaling.

A rationally designed stapled JAZ peptide selectively inhibited MYCs, master-regulators of the jasmonate signaling in Arabidopsis thaliana. It is proposed as a novel chemical tool for the analysis of MYC related jasmonate signaling.

Peptide-based inhibitors of protein-protein interactions: biophysical, structural and cellular consequences of introducing a constraint

Protein-protein interactions (PPIs) are implicated in the majority of cellular processes by enabling and regulating the function of individual proteins. Thus, PPIs represent high-value, but challenging targets for therapeutic intervention. The development of constrained peptides represents an emerging strategy to generate peptide-based PPI inhibitors, typically mediated by α-helices. The approach can confer significant benefits including enhanced affinity, stability and cellular penetration and is ingrained in the premise that pre-organization simultaneously pays the entropic cost of binding, prevents a peptide from adopting a protease compliant β-strand conformation and shields the hydrophilic amides from the hydrophobic membrane. This conceptual blueprint for the empirical design of peptide-based PPI inhibitors is an exciting and potentially lucrative way to effect successful PPI inhibitor drug-discovery. However, a plethora of more subtle effects may arise from the introduction of a constraint that include changes to binding dynamics, the mode of recognition and molecular properties. In this review, we summarise the influence of inserting constraints on biophysical, conformational, structural and cellular behaviour across a range of constraining chemistries and targets, to highlight the tremendous success that has been achieved with constrained peptides alongside emerging design opportunities and challenges.

Toxin-Activating Stapled Peptides Discovered by Structural Analysis Were Identified as New Therapeutic Candidates That Trigger Antibacterial Activity against Mycobacterium tuberculosis in the Mycobacterium smegmatis Model

The structure-function relationships of toxin-antitoxin (TA) systems from Mycobacterium tuberculosis have prompted the development of novel and effective antimicrobial agents that selectively target this organism. The artificial activation of toxins by peptide inhibitors can lead to the growth arrest and eventual death of bacterial cells. Optimizing candidate peptides by hydrocarbon α-helix stapling based on structural information from the VapBC TA system and in vitro systematic validation led to V26-SP-8, a VapC26 activator of M. tuberculosis. This compound exhibited highly enhanced activity and cell permeability owing to the stabilizing helical propensity of the peptide. These characteristics will increase its efficacy against multidrug-resistant tuberculosis and extensively drug-resistant tuberculosis. Similar approaches utilizing structural and biochemical information for new antibiotic targets opens a new era for developing TB therapies.

Small and Simple, yet Sturdy: Conformationally Constrained Peptides with Remarkable Properties

The sheer size and vast chemical space (i.e., diverse repertoire and spatial distribution of functional groups) underlie peptides’ ability to engage in specific interactions with targets of various structures. However, the inherent flexibility of the peptide chain negatively affects binding affinity and metabolic stability, thereby severely limiting the use of peptides as medicines. Imposing conformational constraints to the peptide chain offers to solve these problems but typically requires laborious structure optimization. Alternatively, libraries of constrained peptides with randomized modules can be screened for specific functions. Here, we present the properties of conformationally constrained peptides and review rigidification chemistries/strategies, as well as synthetic and enzymatic methods of producing macrocyclic peptides. Furthermore, we discuss the in vitro molecular evolution methods for the development of constrained peptides with pre-defined functions. Finally, we briefly present applications of selected constrained peptides to illustrate their exceptional properties as drug candidates, molecular recognition probes, and minimalist catalysts.

Challenge to overcome current limitations of cell-penetrating peptides

The penetration of biological membranes is a prime obstacle for the delivery of pharmaceutical drugs. Cell-penetrating peptide (CPP) is an efficient vehicle that can deliver various cargos across the biological membranes. Since the discovery, CPPs have been rigorously studied to unveil the underlying penetrating mechanism as well as to exploit CPPs for various biomedical applications. This review will focus on the various strategies to overcome current limitations regarding stability, selectivity, and efficacy of CPPs.

Photo-induced radical thiol-ene chemistry: a versatile toolbox for peptide-based drug design

While the global market for peptide/protein-based therapeutics is witnessing significant growth, the development of peptide drugs remains challenging due to their low oral bioavailability, poor membrane permeability, and reduced metabolic stability. However, a toolbox of chemical approaches has been explored for peptide modification to overcome these obstacles. In recent years, there has been a revival of interest in photoinduced radical thiol-ene chemistry as a powerful tool for the construction of therapeutic peptides.

Facile Chemoselective Modification of Thioethers Generates Chiral Center-Induced Helical Peptides

The modulation of protein-protein interactions (PPIs) is a promising way for interrogating disease. Stapled peptides that stabilize peptides into a fixed α-helical conformation via chemical means are important representative compounds for regulating PPIs. The effect of the secondary conformation of peptides on the biophysical properties has not been explicitly elucidated due to the difficulty of obtaining peptide epimers with the same chemical composition but different conformations. Herein, we systematically designed and demonstrated the concept of "Chiral Center-Induced Helicity" (CIH) to stabilize the secondary structure of peptides. By introducing a precise R-configuration chiral center on the side-ring of a peptide, researchers can decisively regulate the secondary structure of peptides. Through the study of CIH peptides, we found that increasing the helicity can significantly enhance the stability of peptides and improve the cell membrane penetrating capability of the peptides. Moreover, the substitution group in the chiral center could contribute to additional interactions with the binding groove, which shows great significance for fragment-based drug design. This chapter will focus on the method involved in this research, including specific protocols of the synthesis and basic characterization of CIH peptides in Subheading 3.1. In addition, we have also extended the concept of CIH to dual-chiral center systems, including sulfoxide-based and sulfonium-based in-tether chiral center peptides, which we will introduce in Subheadings 3.2 and 3.3.

Structure-Based De Novo Design of Mycobacterium Tuberculosis VapC-Activating Stapled Peptides

Toxin-antitoxin (TA) systems have been considered essential factors for bacterial survival. During our drug development program aimed against tuberculosis (TB), we discovered certain peptides that mimic the binding of the VapBC30 complex, leading to the arrest of bacterial cell growth and eventually cell death. Herein, we optimized these candidate peptides based on a hydrocarbon stapling strategy and performed biological in vitro evaluations. The V30-SP-8 peptide successfully penetrated Mycobacterium smegmatis cell membranes and exerted bactericidal activity at a minimum inhibitory concentration that inhibited 50% of the isolates (MIC₅₀) < 6.25 μM. With the aid of structural and biochemical information for the VapBC30 TA system from M. tuberculosis, we suggest potential antimicrobial agents that could provide a platform to establish a novel antibacterial strategy. Reflecting the limited number of therapeutic agents targeting TA systems, we believe that this study not only provides chemical tools for exploring the biological events relevant to TA systems but also opens a new gateway toward TB drug discovery.

Advances in cell penetrating peptides and their functionalization of polymeric nanoplatforms for drug delivery

Cell penetrating peptides (CPPs), known as protein translocation domains, have emerged as efficient molecular transporters to overcome biological barriers and deliver cell-impermeable cargoes into cells. The conjugation of CPPs to polymeric nanoplatforms enhances the drug delivery efficiency thus increasing their therapeutic efficacy. However, conventional CPPs are generally lack of cell specificity and could be easily degraded in vivo. These limitations lead to the development of new CPPs with superior properties. To address the issue of cell specificity, activatable CPPs have been designed to be activated at desired site through different stimuli. On the other hand, macrocyclization has been used to constrain linear CPPs into their cyclic forms. This chemical optimization of peptides endows CPPs with enhanced stability and cell permeability. This brief review will cover recent advances in terms of different types of CPPs for enhanced cell penetration. In addition, the modification chemistry used to functionalize polymeric nanoplatforms with CPPs and their recent applications for drug delivery will also be discussed. This article is categorized under: Nanotechnology Approaches to Biology > Cells at the Nanoscale Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

The peptide PROTAC modality: a novel strategy for targeted protein ubiquitination

Despite dramatic advances in drug discovery over the decades, effective therapeutic strategies for cancers treatment are still in urgent demands. PROteolysis TArgeting Chimera (PROTAC), a novel therapeutic modality, has been vigorously promoted in preclinical and clinical applications. Unlike small molecule PROTAC, peptide PROTAC (p-PROTAC) with advantages of high specificity and low toxicity, while avoiding the limitations of shallow binding pockets through large interacting surfaces, provides promising substitutions for E3 ubiquitin ligase complex-mediated ubiquitination of "undruggable proteins". It is worth noting that successful applications of p-PROTAC still have some obstacles, including low stability and poor membrane permeability. Hence, we highlight that p-PROTAC combined with cell-penetrating peptides, constrained conformation technique, and targeted delivery systems could be the future efforts for potential translational research.

Hydrocarbon-Stitched Peptide Agonists of Glucagon-Like Peptide-1 Receptor

Glucagon-like peptide 1 (GLP-1) is a natural peptide agonist of the GLP-1 receptor (GLP-1R) found on pancreatic β-cells. Engagement of the receptor stimulates insulin release in a glucose-dependent fashion and increases β-cell mass, two ideal features for pharmacologic management of type 2 diabetes. Thus, intensive efforts have focused on developing GLP-1-based peptide agonists of GLP-1R for therapeutic application. A primary challenge has been the naturally short half-life of GLP-1 due to its rapid proteolytic degradation in vivo. Whereas mutagenesis and lipidation strategies have yielded clinical agents, we developed an alternative approach to preserving the structure and function of GLP-1 by all-hydrocarbon i, i + 7 stitching. This particular "stitch" is especially well-suited for reinforcing and protecting the structural fidelity of GLP-1. Lead constructs demonstrate striking proteolytic stability and potent biological activity in vivo. Thus, we report a facile approach to generating alternative GLP-1R agonists for glycemic control.

Macrocyclization of an all-d linear α-helical peptide imparts cellular permeability

Peptide-based molecules hold great potential as targeted inhibitors of intracellular protein-protein interactions (PPIs). Indeed, the vast diversity of chemical space conferred through their primary, secondary and tertiary structures allows these molecules to be applied to targets that are typically deemed intractable via small molecules. However, the development of peptide therapeutics has been hindered by their limited conformational stability, proteolytic sensitivity and cell permeability. Several contemporary peptide design strategies are aimed at addressing these issues. Strategic macrocyclization through optimally placed chemical braces such as olefinic hydrocarbon crosslinks, commonly referred to as staples, may improve peptide properties by (i) restricting conformational freedom to improve target affinities, (ii) improving proteolytic resistance, and (iii) enhancing cell permeability. As a second strategy, molecules constructed entirely from d-amino acids are hyper-resistant to proteolytic cleavage, but generally lack conformational stability and membrane permeability. Since neither approach is a complete solution, we have combined these strategies to identify the first examples of all-d α-helical stapled and stitched peptides. As a template, we used a recently reported all d-linear peptide that is a potent inhibitor of the p53-Mdm2 interaction, but is devoid of cellular activity. To design both stapled and stitched all-d-peptide analogues, we used computational modelling to predict optimal staple placement. The resultant novel macrocyclic all d-peptide was determined to exhibit increased α-helicity, improved target binding, complete proteolytic stability and, most notably, cellular activity.

De Novo Design of Cell-Penetrating Foldamers

Cell-penetrating peptides (CPPs) have gained much attention as carriers of hydrophilic molecules, such as drugs, peptides, and nucleic acids, into cells. CPPs are mainly composed of cationic amino acid residues, which play an important role in their intracellular uptake via interactions with acidic groups on cell surfaces. In addition, the secondary structures of CPPs also affect their cell-membrane permeability. Based on this knowledge, a variety of cell-penetrating foldamers (oligomers that form organized secondary structures) have been developed to date. In this account, we describe recent attempts to develop cell-penetrating foldamers containing various building blocks, and their application as DDS carriers.

Methods and Approaches for the Solid-Phase Synthesis of Peptide Alcohols

Many methods have been developed for attaching an alcohol functionality to a solid support. However, not all of these methods are used to obtain peptide alcohols. In this Minireview, we will discuss several of the most important methods and approaches for the synthesis of peptide alcohols and the attachment of hydroxy groups to a solid support for the synthesis of cyclic peptides. Some of the methods include the use of functionalized Wang resin and the attachment of an alcohol to an enol ether resin. We also discuss the use of the chlorotrityl resin, one of the most common linkers used to obtain peptide alcohols. In addition, we outline the recently developed resins with the Rink, Ramage and Sieber handles. The majority of these methods have been used to synthesize many important drugs, such as octreotide and the antibiotic peptaibols.

Bent Into Shape: Folded Peptides to Mimic Protein Structure and Modulate Protein Function

Protein secondary and tertiary structure mimics have served as model systems to probe biophysical parameters that guide protein folding and as attractive reagents to modulate protein interactions. Here we review contemporary methods to reproduce loop, helix, sheet and coiled-coil conformations in short peptides.

The rational design of cell-penetrating peptides for application in delivery systems

Cell penetrating peptides (CPPs) play a crucial role in the transportation of bioactive molecules. Although CPPs have been used widely in various delivery systems, further applications of CPPs are hampered by several drawbacks, such as high toxicity, low delivery efficiency, proteolytic instability and poor specificity. To design CPPs with great cell-penetrating ability, physicochemical properties and safety, researchers have tried to develop new methods to overcome the defects of CPPs. Briefly, (1) the side chain of arginine containing the guanidinium group is essential for the facilitation of cellular uptake; (2) the hydrophobic counterion complex around the guanidinium-rich backbone can "coat" the highly cationic structure with lipophilic moieties and act as an activator; (3) the conformation-constrained strategy was pursued to shield the peptide, thereby impeding access of the proteolytic enzyme; (4) targeting strategies can increase cell-type specificity of CPPs. In this review, the above four aspects were discussed in detail.

Fluorescent Isoindole Crosslink (FlICk) Chemistry: A Rapid, User-friendly Stapling Reaction

The stabilization of peptide secondary structure via stapling is a ubiquitous goal for creating new probes, imaging agents, and drugs. Inspired by indole-derived crosslinks found in natural peptide toxins, we employed ortho-phthalaldehydes to create isoindole staples, thus transforming inactive linear and monocyclic precursors into bioactive monocyclic and bicyclic products. Mild, metal-free conditions give an array of macrocyclic α-melanocyte-stimulating hormone (α-MSH) derivatives, of which several isoindole-stapled α-MSH analogues (K_i ≈1 nm) are found to be as potent as α-MSH. Analogously, late-stage intra-annular isoindole stapling furnished a bicyclic peptide mimic of α-amanitin that is cytotoxic to CHO cells (IC₅₀ =70 μm). Given its user-friendliness, we have termed this approach FlICk (fluorescent isoindole crosslink) chemistry.