Nonadditivity of Faradaic Currents and Modification of Capacitance Currents in the Voltammetry of Mixtures of Ferrocene and the Cobaltocenium Cation in Protic and Aprotic Ionic Liquids

Ion and Solvent Modulation of Ferrocene and Decamethylferrocene Oxidation Potentials in Organic Electrolytes as Predicted by Molecular Dynamics Simulations

Ferrocene is commonly used as an internal redox couple in electrochemical measurements. Therefore, understanding how the absolute oxidation potential of ferrocene is modulated by different solvents and ion concentrations is important for the comparison of experimental measurements between different electrochemical systems. While standard implicit solvation models may provide relatively good predictions in bulk solvents, they lack the ability to describe ion coordination effects that can substantially alter redox potentials in practical electrolyte systems. In this work, we utilize molecular dynamics simulations to compute absolute oxidation potentials for the ferrocene and decamethylferrocene redox couple in bulk solvents of water, acetonitrile, 1,2-dichloroethane, and trichloromethane, as well as organic electrolytes consisting of mixtures of [BMIM+][BF4-] ionic liquid and acetonitrile and 1,2-dichloroethane solvents, for a wide range of ion concentrations. The goals are twofold: first, for the bulk solvents, we compare and evaluate the consistency of redox potential predictions for polarizable and nonpolarizable force fields from explicit solvent, free energy simulations, with predictions from an implicit solvent model. Second, we evaluate how ion coordination within the organic electrolytes modulates the redox potential of ferrocene and decamethylferrocene as a function of the ionic concentration and solvent dielectric constant. Utilizing linear response theory, we analyze the solvation contribution to the redox potential in terms of distributions of anion coordination number and how the anion coordination modulates the vertical ionization energy. We show that inclusion of liquid-vacuum interfacial potentials is essential for consistent prediction/interpretation of redox potentials across different solvents and force fields in order to compensate for the artificial quadrupole trace contribution to the solute cavity interfacial potential; this important consideration was previously proposed by Harder and Roux [J. Chem. Phys. 2008, 129, 234706].

Ferrocene/ferrocenium, cobaltocene/cobaltocenium and nickelocene/nickelocenium: from gas phase ionization energy to one-electron reduction potential in solvated medium

We propose a theoretical procedure for accurate determination of reduction potentials for three metallocene couples, Cp₂M⁺/Cp₂M, where M = Fe, Co and Ni. This procedure first computes the gas phase ionization energy (IE) using the explicitly correlated CCSD(T)-F12 method and includes the zero-point energy correction, core-valence electronic correlation, and relativistic and spin-orbit coupling effects. By means of Born-Haber thermochemical cycle, the one-electron reduction potential is obtained as the sum of the gas phase IE and the corresponding Gibbs free energies of solvation (ΔG_solv) for both the neutral and cationic species. Among the three solvent models (PCM, SMD and uESE) investigated here, it turns out that only the SMD model (computed at the DFT level) gives the best estimation of the value for "ΔG_solv(cation) - ΔG_solv(neutral)" and thus, combining with the accurate IE values, the theoretical protocol is capable of yielding reliable values (in V) for , and . These predictions compare favorably with the available experimental data (in V): , , and . We show that our theoretical procedure is reliable for accurate reduction potential predictions of Cp₂Fe⁺/Cp₂Fe, Cp₂Co⁺/Cp₂Co and Cp₂Ni⁺/Cp₂Ni redox couples in aqueous and non-aqueous media; the maximum absolute deviation is as small as ≈120 mV, which outperforms those of the existing theoretical methods.

Investigating the Electrochemically Driven Capture and Release of Long-Chain PFAS by Redox Metallopolymer Sorbents

The remediation of perfluoroalkyl substances (PFAS) is an urgent challenge due to their prevalence and persistence in the environment. Electrosorption is a promising approach for wastewater treatment and water purification, especially through the use of redox polymers to control the binding and release of target contaminants without additional external chemical inputs. However, the design of efficient redox electrosorbents for PFAS faces the significant challenge of balancing a high adsorption capacity while maintaining significant electrochemical regeneration. To overcome this challenge, we investigate redox-active metallopolymers as a versatile synthetic platform to enhance both electrochemical reversibility and electrosorption uptake capacity for PFAS removal. We selected and synthesized a series of metallopolymers bearing ferrocene and cobaltocenium units spanning a range of redox potentials to evaluate their performance for the capture and release of perfluorooctanoic acid (PFOA). Our results demonstrate that PFOA uptake and regeneration efficiency increased with more negative formal potential of the redox polymers, indicating possible structural correlations with the electron density of the metallocenes. Poly(2-(methacryloyloxy)ethyl cobaltoceniumcarboxylate hexafluorophosphate) (PMAECoPF₆) showed the highest affinity toward PFOA, with an uptake capacity of more than 90 mg PFOA/g adsorbent at 0.0 V vs Ag/AgCl and a regeneration efficiency of more than 85% at -0.4 V vs Ag/AgCl. Kinetics of PFOA release showed that electrochemical bias greatly enhanced the regeneration efficiency when compared to open-circuit desorption. In addition, electrosorption of PFAS from different wastewater matrices and a range of salt concentrations demonstrated the capability of PFAS remediation in complex water sources, even at ppb levels of contaminants. Our work showcases the synthetic tunability of redox metallopolymers for enhanced electrosorption capacity and regeneration of PFAS.

Potential application of metallacarboranes as internal reference: An electrochemical comparative study to ferrocene

Ferrocene and its derivatives have been extensively used as internal reference in electrochemical processes. Yet, they possess limitations such as solvent restrictions that require chemical modifications. In this regard, we...

Ion Selective Detection Based on the Nuances of the Kinetic Fingerprint for Ion Transfer at Soft Interfaces

A novel approach has been developed for the selective determination of cations or anions based on the application of Fourier transformed staircase sinusoidal voltammetry (FT-SC-SV) in combination with the interface between two immiscible electrolyte solutions (ITIES) in the four-electrode configuration. The electrochemistry at the ITIES provides a very simple yet sensitive platform for the detection of a broad spectrum of redox inactive ions and even the neutral (bio)molecules that can be charged (e.g., protonated in appropriate pH). FT-SC-SV employs a complex potential excitation, i.e., a large-amplitude sine wave superimposed onto a dc bias potential that is stepped/scanned throughout the potential window. The response current is subsequently analyzed in the frequency domain by FT. Although the ions have close standard/formal transfer potential, discrimination and selective detection can be achieved by the higher harmonics. Feasibility and reliability of the proposed approach were verified with two pairs of ions that have very close transfer potentials across the ITIES and were chosen as the model systems. Besides, the additivity of the ionic current magnitude on concentration measured either in the mixture of ionic analytes or in individually prepared solutions containing the separate ionic analyte was tested. The experimental results prove that the principle of additivity holds. Compared with the traditional voltammetry, FT-SC-SV is simpler and more efficient in discrimination and quantification of apparently indistinguishable ion transfer from the viewpoint of thermodynamics. This demonstration may provide a new way for analytical detection of a broad range of redox inactive ions in terms of both fundamentals and applications.

Electrochemical study of fast blue BB. A green strategy for sulfination of fast blue BB

This research has led to the development of an environmentally friendly method for the synthesis of some new sulfone derivatives with high yields and without using any toxic reagents and solvents.

Colorimetric and electrochemical quantification of global DNA methylation using a methyl cytosine-specific antibody

We report a simple colorimetric (naked-eye) and electrochemical method for the rapid, sensitive and specific quantification of global methylation levels using only 25 ng of input DNA. Our approach utilises a three-step strategy; (i) initial adsorption of the extracted, purified and denatured bisulfite-treated DNA on a screen-printed gold electrode (SPE-Au), (ii) immuno-recognition of methylated DNA using a horseradish peroxidase (HRP)-conjugated methylcytosine (HRP-5mC) antibody and (iii) subsequent colorimetric detection by the enzymatic oxidation of 3,3',5,5'-tetramethylbenzidin (TMB)/H₂O₂ which generated a blue-coloured product in the presence of methylated DNA and HRP-5mC immunocomplex. As TMB_(ox) is electroactive, it also produces detectable amperometric current at +150 mV versus a Ag pseudo-reference electrode (electrochemical detection). The assay could successfully differentiate 5-aza-2'-deoxycytidine drug-treated and untreated Jurkat DNA samples. It showed good reproducibility (relative standard deviation (% RSD) = <5%, for n = 3) with fairly good sensitivity (as low as 5% difference in methylation levels) and specificity while analysing various levels of global DNA methylation in synthetic samples and cell lines. The method has also been tested for analysing the methylation level in fresh tissue samples collected from eight patients with oesophageal squamous cell carcinoma. We believe that this assay could be potentially useful as a low-cost alternative for genome-wide DNA methylation analysis in point-of-care applications.

Gold-loaded nanoporous ferric oxide nanocubes for electrocatalytic detection of microRNA at attomolar level

A crucial issue in microRNA (miRNA) detection is the lack of sensitive method capable of detecting the low levels of miRNA in RNA samples. Herein, we present a sensitive and specific method for the electrocatalytic detection of miR-107 using gold-loaded nanoporous superparamagnetic iron oxide nanocubes (Au-NPFe₂O₃NC). The target miRNA was directly adsorbed onto the gold surfaces of Au-NPFe₂O₃NC via gold-RNA affinity interaction. The electrocatalytic activity of Au-NPFe₂O₃NC was then used for the reduction of ruthenium hexaammine(III) chloride (RuHex, [Ru(NH₃)₆]³⁺) bound with target miRNA. The catalytic signal was further amplified by using the ferri/ferrocyanide [Fe(CN)₆]^3-/4- system. These multiple signal enhancement steps enable our assay to achieve the detection limit of 100aM which is several orders of magnitudes better than most of the conventional miRNA sensors. The method was also successfully applied to detect miR-107 from cancer cell lines and a panel of tissue samples derived from patients with oesophageal squamous cell carcinoma with excellent reproducibility (% RSD = < 5%, for n = 3) and high specificity. The analytical accuracy of the method was validated with a standard RT-qPCR method. We believe that our method has the high translational potential for screening miRNAs in clinical samples.

Quantum dot-based sensitive detection of disease specific exosome in serum

Tumor-derived exosomes have emerged as promising cancer biomarkers due to their unique composition and functions. Herein, we report a stripping voltammetric immunoassay for the electrochemical detection of disease-specific exosomes using quantum dots as signal amplifiers. The assay involves three subsequent steps where bulk exosome populations are initially magnetically captured on magnetic beads by a generic tetraspanin antibody (e.g., CD9 or CD63) followed by the identification of disease-specific exosomes using cancer-related. Here, we used CdSe quantum dot (CdSeQD) functionalised-biotinylated HER-2 and FAM134B antibodies as breast and colon cancer markers. After magnetic washing and purification steps, acid dissolution of CdSeQDs and subsequent anodic stripping voltammetric quantification of Cd²⁺ were carried out at the bare glassy carbon working electrode. This method enabled sensitive detection of 100 exosomes per μL with a relative standard deviation (%RSD) of <5.5% in cancer cell lines and a small cohort of serum samples (n = 9) collected from patients with colorectal adenocarcinoma. We believe that our approach could potentially represent an effective bioassay for the quantification of disease-specific exosomes in clinical samples.

Substituted ferrocenes and iodine as synergistic thermoelectrochemical heat harvesting redox couples in ionic liquids

Combining ferrocene and iodine results in enhanced thermoelectrochemical (or thermogalvanic) waste heat harvesting abilities, for both the Seebeck coefficient and the overall power output. All systems displayed a mixture of ferrocene, ferrocenium, iodine and triiodide. The observed enhancement correlates with lower electron-density on the ferrocene; the synergistic improvement observed for mixtures of substituted ferrocenes and iodine is attributed to the formation of charge-transfer complexes. Combining dibutanoylferrocene and iodine resulted in the highest Seebeck coefficient of 1.67 mV K(-1).

Dependence of cobaltocenium diffusion in ionic liquids on the alkyl chain length of 1-alkyl-3-methylimidazolium cations

The electrochemical behavior of cobaltocenium (Cc(+)) on a Au(111) electrode was investigated in five 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([Cnmim][Tf2N], n = 2, 4, 6, 8, or 10) ionic liquids (ILs) in the temperature range from 293.15 to 343.15 K by cyclic voltammetry and chronoamperometry. The redox couple of Cc(+) exhibited a clear reversible one-electron reaction in all the [Cnmim][Tf2N] ILs. The diffusion coefficients of Cc(+) increased with an increase in the alkyl chain length of [Cnmim](+) and a decrease in the viscosity of the IL upon elevating the temperature. The viscosity of the IL plays an important role in determining the activation energy for the diffusion of Cc(+). The obtained results suggested that the alkyl chain length of [Cnmim](+) affects the strength of the interaction between Cc(+) and the surrounding ion species. The results also clarified that the equation proposed by Sutherland adequately describes the diffusion of Cc(+) in ILs when the effect of the type of IL and the temperature on the product of the Stokes radius of Cc(+) and the Sutherland coefficient is considered.

The Effect of Temperature on Kinetics and Diffusion Coefficients of Metallocene Derivatives in Polyol-Based Deep Eutectic Solvents

The temperature dependence of the density, dynamic viscosity and ionic conductivity of several deep eutectic solvents (DESs) containing ammonium-based salts and hydrogen bond donvnors (polyol type) are investigated. The temperature-dependent electrolyte viscosity as a function of molar conductivity is correlated by means of Walden's rule. The oxidation of ferrocene (Fc/Fc+) and reduction of cobaltocenium (Cc+/Cc) at different temperatures are studied by cyclic voltammetry and potential-step chronoamperometry in DESs. For most DESs, chronoamperometric transients are demonstrated to fit an Arrhenius-type relation to give activation energies for the diffusion of redox couples at different temperatures. The temperature dependence of the measured conductivities of DES1 and DES2 are better correlated with the Vogel-Tamman-Fulcher equation. The kinetics of the Fc/Fc+ and Cc+/Cc electrochemical systems have been investigated over a temperature range from 298 to 338 K. The heterogeneous electron transfer rate constant is then calculated at different temperatures by means of a logarithmic analysis. The glycerol-based DES (DES5) appears suitable for further testing in electrochemical energy storage devices.

Tuning of HOMO energy levels and open circuit voltages in solar cells based on statistical copolymers prepared by ADMET polymerization

A donor–acceptor statistical copolymer series spanning the entire composition window was prepared and studied in organic solar cells.

Electrochemical study of Alamar Blue (resazurin) in aqueous solutions and room-temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate at a glassy carbon electrode

Electrochemical behaviour of resazurin in aqueous buffered solutions and ionic liquid was studied. The orientation of adsorbed resazurin was estimated. It is found that, the orientation of the adsorbed resazurin at glassy carbon surface is edgewise.

Solute diffusion in ionic liquids, NMR measurements and comparisons to conventional solvents

Diffusion coefficients of a variety of dilute solutes in the series of 1-alkyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imides ([Prn1][Tf2N], n = 3, 4, 6, 8, and 10), trihexyltetracedecylphosphonium bis(trifluoromethanesulfonyl)imide [P14,666][Tf2N], and assorted imidazolium ionic liquids are measured using pulsed field gradient (1)H NMR. These data, combined with available literature data, are used to try to uncover the solute and solvent characteristics most important in determining tracer diffusion rates. Discussion is framed in terms of departures from simple hydrodynamic predictions for translational friction using the ratio ζobs/ζSE, where ζobs is the observed friction, determined from the measured diffusion coefficient D via ζobs = kBT/D, and ζSE = 6πηR is the Stokes friction on a sphere of radius R (determined from the solute van der Waals volume) in a solvent with viscosity η. In the case of neutral solutes, the primary determinant of whether hydrodynamic predictions are accurate is the relative size of solute versus solvent molecules. A single correlation, albeit with considerable scatter, is found between ζobs/ζSE and the ratio of solute-to-solvent van der Waals volumes, ζobs/ζSE = {1 + a(VU/VV)(-p)}, with constants a = 1.93 and p = 1.88. In the case of small solutes, the observed friction is over 100-fold smaller than predictions of hydrodynamic models. The dipole moment of the solute has little effect on the friction, whereas solute charge has a marked effect. For monovalent solutes of size comparable to or smaller than the solvent ions, the observed friction is comparable to or even greater than what is predicted by hydrodynamics. These general trends are shown to be quite similar to what is observed for tracer diffusion in conventional solvents.

Electrochemical Behavior of Cobaltocene in Ionic Liquids

The electrochemical behavior of cobaltocenium has been studied in a number of room temperature aprotic ionic liquids. Well defined, diffusion controlled, anodic and cathodic peaks were found for the Cc+/Cc (cobaltocenium/cobaltocene) reduction/oxidation on gold, platinum and glassy carbon electrodes. Values of the peak separation parameters suggest quasireversibility or even irreversibility for the redox process. The difference between the ferrocene/ferrocenium and cobaltocenium/cobaltocene couples has been evaluated as equal to (1.350 ± 0.020) V. Values of the cobaltocenium (Cc+) diffusion coefficients D have been calculated on the basis of the Randles-Sevcik equation.

Band Gap and HOMO Level Control in Poly(thienylene vinylene)s Prepared by ADMET Polymerization

Three dipropenyl monomers were prepared for ruthenium-catalyzed acyclic diene metathesis (ADMET) polymerization. Homopolymerization afforded three poly(thienylene vinylene)s (PTVs) with distinct optoelectronic properties. Binary combinations of the monomers over a range of compositions gave three series of copolymer samples with tunable HOMO levels and band gaps. The utility of this method was further demonstrated by the preparation of a stoichiometric terpolymer. Polymers were characterized by ¹H NMR spectroscopy, size-exclusion chromatography, ultraviolet-visible spectroscopy, and cyclic voltammetry. This copolymerization approach effectively demonstrates the ability of ADMET polymerization to prepare conjugated copolymers with tuned optoelectronic properties that span a broad composition window.

Large amplitude Fourier transformed AC voltammetric investigation of the active state electrochemistry of a copper/aqueous base interface and implications for electrocatalysis

The higher harmonic components available from large-amplitude Fourier-transformed alternating current (FT-ac) voltammetry enable the surface active state of a copper electrode in basic media to be probed in much more detail than possible with previously used dc methods. In particular, the absence of capacitance background current allows low-level Faradaic current contributions of fast electron-transfer processes to be detected; these are usually completely undetectable under conditions of dc cyclic voltammetry. Under high harmonic FT-ac voltammetric conditions, copper electrodes exhibit well-defined and reversible premonolayer oxidation responses at potentials within the double layer region in basic 1.0 M NaOH media. This process is attributed to oxidation of copper adatoms (Cu*) of low bulk metal lattice coordination numbers to surface-bonded, reactive hydrated oxide species. Of further interest is the observation that cathodic polarization in 1.0 M NaOH significantly enhances the current detected in each of the fundamental to sixth FT-ac harmonic components in the Cu*/Cu hydrous oxide electron-transfer process which enables the underlying electron transfer processes in the higher harmonics to be studied under conditions where the dc capacitance response is suppressed; the results support the incipient hydrous oxide adatom mediator (IHOAM) model of electrocatalysis. The underlying quasi-reversible interfacial Cu*/Cu hydrous oxide process present under these conditions is shown to mediate the reduction of nitrate at a copper electrode, while the mediator for the hydrazine oxidation reaction appears to involve a different mediator or active state redox couple. Use of FT-ac voltammetry offers prospects for new insights into the nature of active sites and electrocatalysis at the electrode/solution interface of Group 11 metals in aqueous media.

On the diffusion of ferrocenemethanol in room-temperature ionic liquids: an electrochemical study

The electrochemical behaviour of ferrocenemethanol (FcMeOH) has been studied in a range of room-temperature ionic liquids (RTILs) using cyclic voltammetry, chronoamperomery and scanning electrochemical microscopy (SECM). The diffusion coefficient of FcMeOH, measured using chronoamperometry, decreased with increasing RTIL viscosity. Analysis of the mass transport properties of the RTILs revealed that the Stokes-Einstein equation did not apply to our data. The "correlation length" was estimated from diffusion coefficient data and corresponded well to the average size of holes (voids) in the liquid, suggesting that a model in which the diffusing species jumps between holes in the liquid is appropriate in these liquids. Cyclic voltammetry at ultramicroelectrodes demonstrated that the ability to record steady-state voltammograms during ferrocenemethanol oxidation depended on the voltammetric scan rate, the electrode dimensions and the RTIL viscosity. Similarly, the ability to record steady-state SECM feedback approach curves depended on the RTIL viscosity, the SECM tip radius and the tip approach speed. Using 1.3 μm Pt SECM tips, steady-state SECM feedback approach curves were obtained in RTILs, provided that the tip approach speed was low enough to maintain steady-state diffusion at the SECM tip. In the case where tip-induced convection contributed significantly to the SECM tip current, this effect could be accounted for theoretically using mass transport equations that include diffusive and convective terms. Finally, the rate of heterogeneous electron transfer across the electrode/RTIL interface during ferrocenemethanol oxidation was estimated using SECM, and k(0) was at least 0.1 cm s(-1) in one of the least viscous RTILs studied.