Ship-in-a-Bottle Preparation of Long Wavelength Molecular Antennae in Lanthanide Metal-Organic Frameworks for Biological Imaging

Effect of the heteroatom on the magnetic and luminescence properties of hybrid lanthanide-substituted Keggin-type polyoxometalates

Replacement of the heteroatom from Si to Ge has a strong influence on the luminescence properties of a series of hybrid, sandwich-type K5[Ln(α-GeW11O39)(C20H22Br2N2O4)]·14H2O (1Ge-Ln, Ln = Sm to Lu) anions. Interestingly, the Gd and Yb derivatives retain their ability to display slow relaxation of magnetisation.

Postsynthetic Installation of Lanthanide Cubane Clusters in a 3D Hydrogen-Bonded Framework of IrIII4ZnII4 Multicarboxylates

Immersing single crystals of (Δ)4-K6[Ir4Zn4O(l-cysteinate)12]·nH2O (K6[1Ir]·nH2O) bearing 12 free carboxylate groups, which was newly prepared from Δ-H3[Ir(l-cysteinate)3], ZnBr2, ZnO, and KOH, in an aqueous solution of lanthanide(III) acetate produced Ln2[1Ir]·nH2O (2Ln; Ln = LaIII, CeIII, PrIII, and NdIII) and Ln0.33[Ln4(OH)4(OAc)3(H2O)7][1Ir]·nH2O (3Ln; Ln = SmIII, EuIII, GdIII, TbIII, DyIII, ErIII, HoIII, TmIII, YbIII, and LuIII) in a single-crystal-to-single-crystal transformation manner. X-ray crystallography showed that the KI ions in K6[1Ir]·nH2O are completely exchanged by the LnIII ions in 2Ln and 3Ln, retaining the 3D hydrogen-bonded framework that consists of the IrIII4ZnII4 complex anions of [1Ir]6-. While 2Ln contained the LnIII ions as isolated aqua species, the LnIII ions in 3Ln existed as cationic cubane clusters of [Ln4(OH)4(OAc)3(H2O)7]5+; these were linked by [1Ir]6- anions through carboxylate groups in a 3D polymeric structure. 3Ln showed magnetic and photoluminescence properties that are characteristically observed for discrete LnIII species in the solid state.

Eu3+ doped ethylenediamine functionalized UiO-66 probe for fluorescence sensing of formaldehyde

The development of probes with selectivity and prompt detection of aldehydes molecules is of great importance for protecting human health and public security. Herein, a system based on ethylenediamine (EDA) functionalized and Eu3+-doped UiO-66, namely EDA-Eu3+@UiO-66, was designed to detect formaldehyde molecules. Based on the "antenna effect" of lanthanide elements, UiO-66 transfers the absorbed energy to Eu3+ ions and emits characteristic fluorescence belonging to Eu3+. By using the fluorescence peaks of UiO-66 and Eu3+ respectively, a ratiometric fluorescence sensing probe can be constructed. Formaldehyde molecules react with the -NH2 on the surface of EDA-Eu3+@UiO-66 through an aldehyde-amine condensation reaction and connect to the functionalized surface of UiO-66. Due to the absorption of excitation light energy by formaldehyde molecules, the energy transfer efficiency from UiO-66 to Eu3+ ions is reduced, resulting in the fluorescence quenching of EDA-Eu3+@UiO-66, thus achieving selective detection of formaldehyde. The fabricated sensing platform successfully detected residual formaldehyde in frozen shrimp tail samples. The system was also used to respond to formaldehyde vapor, and a significant fluorescence quenching effect was observed. This strategy provides a sensitive, selective, and reliable method for the visual sensing of formaldehyde.

Fluorinated Iron Metal-Organic Frameworks for Activatable 19F Magnetic Resonance Imaging and Synergistic Therapy of Tumors

Due to their appealing physiochemical properties, metal-organic frameworks (MOFs) have been widely employed in biomedical fields. In this study, we utilize ferric ions and fluorine-containing organic ligands as both structural and functional units to develop a stimulus-responsive nanoagent, 19FIMOF-TA nanoparticles, for activatable 19F magnetic resonance imaging (MRI) and synergistic therapy of tumors. This nanoagent could respond to excess GSH in a tumor microenvironment, discharging fluorinated organic ligands and reduced ferrous ions. The release of these fluorine-containing small molecules results in boosting of the 19F MRI signals, which could be further enhanced by the photothermal effect of this nanoagent to achieve a responsive cascaded amplification of 19F MRI signals for tumor visualization. Meanwhile, ferroptosis promoted by the ferrous ions leads to significant tumor cell death, which is synergistically aggravated by the photothermal effect. The encouraging results illustrate the promising potential of our nanoagent for effective tumor imaging and combinative cancer therapy.

Target Design of Multinary Metal-Organic Frameworks for Near-Infrared Imaging and Chemodynamic Therapy

Imaging-guided chemodynamic therapy is widely considered a promising modality for personalized and precision cancer treatment. Combining both imaging and chemodynamic functions in one system conventionally relies on the hybrid materials approach. However, the heterogeneous, ill-defined, and dissociative/disintegrative nature of the composites tends to complicate their action proceedings in biological environments and thus makes the treatment imprecise and ineffective. Herein, a strategy to employ two kinds of inorganic units with different functions─reactive oxygen species generation and characteristic emission─has achieved two single-crystalline metal-organic frameworks (MOFs), demonstrating the competency of reticular chemistry in creating multifunctional materials with atomic precision. The multinary MOFs could not only catalyze the transformation from H2O2 to hydroxyl radicals by utilizing the redox-active Cu-based units but also emit characteristic tissue-penetrating near-infrared luminescence brought by the Yb4 clusters in the scaffolds. Dual functions of MOF nanoparticles are further evidenced by pronounced cell imaging signals, elevated intracellular reactive oxygen species levels, significant cell apoptosis, and reduced cell viabilities when they are taken up by the HeLa cells. In vivo NIR imaging is demonstrated after the MOF nanoparticles are further functionalized. The independent yet interconnected modules in the intact MOFs could operate concurrently at the same cellular site, achieving a high spatiotemporal consistency. Overall, our work suggests a new method to effectively accommodate both imaging and therapy functions in one well-defined material for precise treatment.

Recent advances in surface-mounted metal-organic framework thin film coatings for biomaterials and medical applications: a review

Coatings of metal-organic frameworks (MOFs) have potential applications in surface modification for medical implants, tissue engineering, and drug delivery systems. Therefore, developing an applicable method for surface-mounted MOF engineering to fabricate protective coating for implant tissue engineering is a crucial issue. Besides, the coating process was desgined for drug infusion and effect opposing chemical and mechanical resistance. In the present review, we discuss the techniques of MOF coatings for medical application in both in vitro and in vivo in various systems such as in situ growth of MOFs, dip coating of MOFs, spin coating of MOFs, Layer-by-layer methods, spray coating of MOFs, gas phase deposition of MOFs, electrochemical deposition of MOFs. The current study investigates the modification in the implant surface to change the properties of the alloy surface by MOF to improve properties such as reduction of the biofilm adhesion, prevention of infection, improvement of drugs and ions rate release, and corrosion resistance. MOF coatings on the surface of alloys can be considered as an opportunity or a restriction. The presence of MOF coatings in the outer layer of alloys would significantly demonstrate the biological, chemical and mechanical effects. Additionally, the impact of MOF properties and specific interactions with the surface of alloys on the anti-microbial resistance, anti-corrosion, and self-healing of MOF coatings are reported. Thus, the importance of multifunctional methods to improve the adhesion of alloy surfaces, microbial and corrosion resistance and prospects are summarized.

The Effect of Linker-to-Metal Energy Transfer on the Photooxidation Performance of an Isostructural Series of Pyrene-Based Rare-Earth Metal-Organic Frameworks

The tetratopic linker, 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4 TBAPy) along with rare-earth (RE) ions is used for the synthesis of 9 isostructures of a metal-organic framework (MOF) with shp topology, named RE-CU-10 (RE = Y(III), Gd(III), Tb(III), Dy(III), Ho(III), Er(III), Tm(III), Yb(III), and Lu(III)). The synthesis of each RE-CU-10 analogue requires different reaction conditions to achieve phase pure products. Single crystal X-ray diffraction indicates the presence of a RE9 -cluster in Y- to Tm-CU-10, while a RE11 -cluster is observed for Yb- and Lu-CU-10. The photooxidation performance of RE-CU-10 analogues is evaluated, observing competition between linker-to-metal energy transfer versus the generation of singlet oxygen. The singlet oxygen produced is used to detoxify a mustard gas simulant 2-chloroethylethyl sulfide, with half-lives ranging from 4.0 to 5.8 min, some of the fastest reported to date using UV-irradiation and < 1 mol% catalyst, in methanol under O2 saturation.

Sensitive Current Sensor Based on a Lanthanide Framework with Lewis Basic Bipyridyl Sites for Cu2+ Detection

A new Yb-based three-dimensional metal-organic framework with free Lewis basic sites, [Yb₂(ddbpdc)₃(CH₃OH)₂] (referred to as ACBP-6), from YbCl₃ and (6R,8R)-6,8-dimethyl-7,8-dihydro-6H-[1,5]dioxonino[7,6-b:8,9-b']dipyridine-3,11-dicarboxylic acid (H₂ddbpdc) was synthesized by a conventional solvothermal method. Two Yb³⁺ are connected by three carboxyl groups to form the [Yb₂(CO₂)₅] binuclear unit, which is further bridged by two carboxyl moieties to produce a tetranuclear secondary building unit. With further ligation of the ligand ddbpdc^2-, a 3-D MOF with helical channels is constructed. In the MOF, Yb³⁺ only coordinates with O atoms, leaving the bipyridyl N atoms of ddbpdc^2- unoccupied. The unsaturated Lewis basic sites make this framework possible to coordinate with other metal ions. After growing the ACBP-6 in situ into a glass micropipette, a novel current sensor is formed. This sensor shows high selectivity and a high signal-to-noise ratio toward Cu²⁺ detection with a detection limit of 1 μM, due to the stronger coordination ability between the Cu²⁺ and the bipyridyl N atoms.

Structural Compromise Between Conflicted Spatial-Arrangements of Two Linkers in Metal-Organic Frameworks

The structural control of metal-organic frameworks (MOFs) is essential for the development of superlative MOFs because the structural features of MOFs and their components play a critical role in determining their properties, and ultimately, their applications. The best components to endow the desired properties for MOFs are available via the appropriate choice from many existing chemicals or synthesizing new ones. However, to date, considerably less information exists regarding fine-tuning the MOF structures. Herein, a strategy for tuning MOF structures by merging two MOF structures into a single MOF, is demonstrated. Depending on the incorporated amounts and relative contributions of the two coexisting organic linkers, benzene-1,4-dicarboxylate (BDC^2- ) and naphthalene-1,4-dicarboxylate (NDC^2- ), which have conflicting spatial-arrangement preferences within an MOF structure, MOFs are rationally designed to have a Kagomé or rhombic lattice. In particular, MOFs with rhombic lattices are constructed to have specific lattice angles by compromising the optimal structural arrangements between the two mixed linkers. The relative contributions of the two linkers during MOF construction determine the final MOF structures, and the competitive influence between BDC^2- and NDC^2- is effectively regulated to produce specific MOF structures with controlled lattices.

An iron(III) complex-based supramolecular organic framework (SOF) as a theranostic platform via magnetic resonance imaging-guided chemotherapy

It is crucially important to explore the additional metal-endowed functions of supramolecular organic frameworks (SOFs) for expanding their applications. In this work we have reported the performance of a SOF (designated as Fe(III)-SOF) as a theranostic platform via magnetic resonance imaging (MRI)-guided chemotherapy. The Fe(III)-SOF may be used as an MRI contrast agent for cancer diagnosis because the building unit (iron complex) contains high spin iron(III) ions. Additionally, the Fe(III)-SOF may also be used as a drug carrier because it possesses stable internal voids. We loaded doxorubicin (DOX) into the Fe(III)-SOF to obtain a DOX@Fe(III)-SOF. The Fe(III)-SOF showed good loading content (16.3%) and high loading efficiency (65.2%) for DOX. Additionally, the DOX@Fe(III)-SOF had a relatively modest relaxivity value (r₂ = 19.745 mM^-1 s^-1) and exhibited the strongest negative contrast (darkest) at 12 h of post-injection. Furthermore, the DOX@Fe(III)-SOF effectively inhibited tumor growth and showed high anticancer efficiency. In addition, the Fe(III)-SOF was biocompatible and biosafe. Therefore, the Fe(III)-SOF was an excellent theranostic platform and may have potential applications in tumor diagnosis and treatment in the future. We believe that this work will initiate extensive research endeavors not only on the development of SOFs, but also on the construction of theranostic platforms based on SOFs.

Tetra-Nuclear Cluster-Based Lanthanide Metal-Organic Frameworks as White Phosphor, Information Encryption, Self-Calibrating Thermometers, and Fe2+ Sensors

The application of one kind of metal-organic framework (MOF) material used in multiple fields is one of the most interesting research topics. In this work, four new tetra-nuclear cluster-based lanthanide metal-organic frameworks (LnMOFs) [Ln₂(BTDB)₃(DMA)(phen)]_n (Ln = Tb TbMOF, Eu EuMOF, Gd GdMOF, Tb_1.830Eu_0.170 Tb,EuMOF, 3,5-bis(trifluoromethyl)-4',4″-dicarboxytriphenylamine = H₂BTDB, 1,10-phenanthroline = phen) are obtained based on the ligand of H₂BTDB that is synthesized in our laboratory, and the precise single-crystal structure of H₂BTDB is obtained for the first time. The white phosphor was obtained by facilely hybridizing two components of the orange-yellow emission phosphor of Tb,EuMOF and the blue luminescence material of triphenylamine according to the trichromatic theory. At the same time, TbMOF, EuMOF, Tb,EuMOF, and the white phosphor can be used for information encryption, demonstrating their potential application in the field of anti-counterfeiting. Tb,EuMOF is also a multi-mode and self-calibrating thermometer within a broad temperature range of 110-300 K. Further studies show that EuMOF is a rapid response sensor for Fe²⁺, with a very low limit of detection of 2.0 nM, which is much lower than the national standards for Fe²⁺ (GB 5749-2005, 5.357 μM). It can achieve strong anti-interference detection of Fe²⁺ in actual samples of tap water and lake water. In addition, EuMOF can also be made into an easy-to-use sensing device of test paper for real-time and visual sensing of Fe²⁺.

The Human Dermis as a Target of Nanoparticles for Treating Skin Conditions

Skin has a preventive role against any damage raised by harmful microorganisms and physical and chemical assaults from the external environment that could affect the body's internal organs. Dermis represents the main section of the skin, and its contribution to skin physiology is critical due to its diverse cellularity, vasculature, and release of molecular mediators involved in the extracellular matrix maintenance and modulation of the immune response. Skin structure and complexity limit the transport of substances, promoting the study of different types of nanoparticles that penetrate the skin layers under different mechanisms intended for skin illness treatments and dermo-cosmetic applications. In this work, we present a detailed morphological description of the dermis in terms of its structures and resident cells. Furthermore, we analyze the role of the dermis in regulating skin homeostasis and its alterations in pathophysiological conditions, highlighting its potential as a therapeutic target. Additionally, we describe the use of nanoparticles for skin illness treatments focused on dermis release and promote the use of metal-organic frameworks (MOFs) as an integrative strategy for skin treatments.

Robust Carbazole-Based Rare-Earth MOFs: Tunable White-Light Emission for Temperature and DMF Sensing

Rare-earth metal-organic frameworks (RE-MOFs) are an attractive platform to construct luminescent materials for practical applications in lighting, optoelectronics, and sensing. By adjusting the metal composition in mixed RE-MOFs, one can not only realize tunable emission but also construct ratiometric luminescent sensors. As such, it is highly desirable to prepare robust RE-MOFs that display efficient, multifunctional sensing capability. In this work, we designed and synthesized a series of RE-MOFs that exhibit both excellent thermal and chemical stability due to the incorporation of a bulky tert-butyl group on a new carbazole-based ligand. By rationally tuning the molar ratio of Eu³⁺/Tb³⁺/Y³⁺, a white-light-emitting MOF was developed as an excellent thermal sensor that exhibits a temperature-induced ratiometric luminescence response between 278 and 378 K. After removing the coordinated solvent molecules via thermal treatment, the desolvated MOF materials exhibit excellent turn-on or color change sensitivity to recognize dimethylformamide (DMF) molecules. Such high sensitivity is attributed to the DMF coordination that induces the framework structure change and shifts the ligand's excited-state energy level to facilitate the ligand-to-metal energy transfer process. Taking together, NPF-700-RE represents a new class of robust, tunable luminescent materials that have great potential in white-light emission and thermal- and DMF-sensing applications.

Portable visual assay of Bacillus anthracis biomarker based on ligand-functionalized dual-emission lanthanide metal-organic frameworks and smartphone-integrated mini-device

A single-functionalized ligand single-Ln³⁺ based dual-emission Ln-MOF fluorescent sensor was established for portable and visual dipicolinic acid (DPA, Bacillus anthracis biomarker) detection. First, a theory calculation-based prediction model was developed for designing single-functionalized ligand single-Ln³⁺ dual-emission Ln-MOFs. The model consisted of three calculation modules: intramolecular hydrogen bonds, excited state energy levels, and coordination stability with Ln³⁺ of ligands. Tb³⁺ and Eu³⁺ were selected as metal luminescence centers, PTA-X (PTA: p-phthalic acid, X = NH₂, CH₃, H, OH) with different functional groups as one-step functionalization ligands, and the luminescent feature of four Tb-MOFs and four Eu-MOFs was predicted with the model. Coupled with prediction results and experimental verification results, Tb-PTA-OH was rapidly determined to be the sole dual-emission Ln-MOF. Then, Tb-PTA-OH was applied to DPA detection by ratiometric fluorescence, and an ultra-low limit of detection (13.4 nM) was obtained, which is much lower than the lowest anthrax infectious dose (60 μM). A portable visual assay method based on paper-microchip and smartphone integrated mini-device was further established (limit of qualification 0.48 μM). A new sensing mechanism and a "triple gates" selectivity mechanism to DPA were proposed. This work reveals guidelines for material design and mini-device customization in detecting hazardous substances.

Solvo-thermal synthesis of a unique cluster-based nano-porous zinc(II) luminescent metal-organic framework for highly sensitive detection of anthrax biomarker and dichromate

In this work a flexible multi-dentate 4,4'-(1H-1,2,4-triazole-1-yl) methylene-bis(benzonic acid) (H₂L) ligand has been employed, a unique cluster-based nano-porous luminescent zinc(II) metal-organic framework {[Zn(μ₆-L)]·(DMAC)₂}_n (1) (DMAC = Dimethylacetamide) has been isolated under solvo-thermal conditions. The H₂L ligand adopts hexa-dentate coordination modes via one triazole nitrogen atom and four aromatic carboxylate oxygen atoms, which bridge the neighboring six-coordinated Zn^II centers, leading to a three-dimensional (3D) nano-porous metal organic framework. A PLATON program analysis suggests the total potential solvent area volume is 2028.9 Å³, which occupy 62.5% percent of the unit cell volume (3248.4 Å³). PXRD Patterns of the as-synthesized samples 1 have been determined confirming the purity of the bulky samples. Photo-luminescent properties indicate strong fluorescent emissions of 1 at the room temperature. Further photo-luminescent measurements show that 1 can exhibit highly sensitive real-time luminescence sensing of anthrax biomarker dipicolinic acid (DPA) with high quenching efficiency (K_SV = 1.48 × 10⁵ M^-1) and low detection limit (0.298 μM (S/N = 3)). Meanwhile 1 also exhibits highly selective and sensitive luminescence sensing for Cr₂O₇^2- ions in aqueous solutions with high quenching efficiency K_SV = 1.22 × 10⁴ L·mol^-1 and low detection limit (0.023 μM (S/N = 3)). Therefore 1 can be used a unique multi-functional 3D cluster-based metal organic material in sensitive detection and effective detection of environment pollutants and biomarker molecules.

Strength and Nature of Host-Guest Interactions in Metal-Organic Frameworks from a Quantum-Chemical Perspective

Metal-organic frameworks (MOFs) offer a convenient means for capturing, transporting, and releasing small molecules. Their rational design requires an in-depth understanding of the underlying non-covalent host-guest interactions, and the ability to easily and rapidly pre-screen candidate architectures in silico. In this work, we devised a recipe for computing the strength and analysing the nature of the host-guest interactions in MOFs. By assessing a range of density functional theory methods across periodic and finite supramolecular cluster scale we find that appropriately constructed clusters readily reproduce the key interactions occurring in periodic models at a fraction of the computational cost. Host-guest interaction energies can be reliably computed with dispersion-corrected density functional theory methods; however, decoding their precise nature demands insights from energy decomposition schemes and quantum-chemical tools for bonding analysis such as the quantum theory of atoms in molecules, the non-covalent interactions index or the density overlap regions indicator.

Cyanine-Doped Lanthanide Metal-Organic Frameworks for Near-Infrared II Bioimaging

Developing metal-organic frameworks (MOFs) with strong near-infrared II (NIR-II, 1000-1700 nm) emission is significant for biomedical research but highly challenging. So far there are no MOFs reported for NIR-II imaging in vivo due to their poor NIR-II emission efficiency. Herein, a strategy is proposed to prepare MOFs with strong NIR-II emission, by integrating NIR dye IR-3C and Ln3+ (Ln = Yb, Nd, and Er) into a same framework. IR-3C with high photon-absorption ability harvests the excitation photons and transfers energy to Ln3+ via a resonance energy transfer pathway, significantly enhancing the NIR-II emission of Ln3+ . The as-obtained Er-BTC-IR exhibits excellent NIR-IIb (1500-1700 nm) emission efficiency in aqueous phase and good biocompatibility after surface modification, which provides advanced bioimaging performance in vivo. It is able to clearly delineate the vessels, spine, and lymph of mice, and also to differentiate the vessels with acute vascular inflammation. This strategy paves the way to the preparation of NIR-II emissive MOFs and will promote their bioapplication.

Multifunctional lanthanide MOF luminescent sensor built by structural designing and energy level regulation of a ligand

In order to reduce usage cost and simplify the detection process, it is necessary to develop multifunctional and multi-emitter Ln-MOF luminescent sensors.

Amino Group Induced Structural Diversity and Near-Infrared Emission of Yttrium-Tetracarboxylate Frameworks

Near-infrared (NIR)-emitting materials have been extensively studied due to their important applications in biosensing and bioimaging. Luminescent metal–organic frameworks (LMOFs) are a new class of highly emissive materials with strong potential for utilization in biomedical related fields because of their nearly unlimited structural and compositional tunability. However, very little work has been reported on organic linker-based NIR-MOFs and their emission properties. In the present work, a series of yttrium-tetracarboxylate-based LMOFs (HIAM-390X) are prepared via judicious linker design to achieve NIR emission with diverse structures. The introduction of an amino group not only offers the remarkable emission bathochromic shift from 521 nm, 665 nm to 689 nm for the resultant MOFs, but also influences the linker conformations, leading to the topology evolution from (4,12)-c ftw, (4,8)-c scu, which is rarely reported in rare earth element-based MOFs, to an unprecedented topology hlx for HIAM-3901 (without an amino group), HIAM-3905 (with one amino group) and HIAM-3906 (with two amino groups). Among these MOFs, HIAM-3907 shows an emission maximum at ∼790 nm, with the emission tail close to 1000 nm. The NIR emission may be attributed to the combination of the strongly electron-donating amino group and the strongly electron-withdrawing acceptor naphtho[2,3-c][1,2,5]selenadiazole. This work sheds light on the rational design of organic linker-based LMOFs with controlled structures and NIR emission, and inspires future interest in biosensing and bioimaging related applications of NIR-MOFs.

Introduction of amino groups into linkers will not only induce a significant emission red-shift to near-infrared, but also increase structural diversity of resultant LMOFs, leading to structural change from ftw, scu to an unprecedented topology hlx.

An imine-linked covalent organic framework for renewable and sensitive determination of antibiotic

Lanthanide-functionalized porous organic materials have been the promising candidates in the chemical and biological sensing. Considering the superior thermal and solvent stability of covalent organic frameworks (COFs), the development of lanthanide ions-functionalized COFs based sensing platform is meaningful, while remains to be a challenge. In this work, a new imine-linked COF which provides suitable coordination sites for Tb³⁺ was constructed via the Schiff base reaction between P-phenylenediamine (Pda) and 2,6-Diformylpyridine (Dfp). Benefiting from its high signal-to-noise, the COF@Tb shows excellent ability to determinate ciprofloxacin (CIP) with a detection limit of 3.01 nM. The measurement can maintain good stability in the presence of potential interference or in actual sample. Being washed with ethanol after each measurement, COF@Tb can be recycled for five times. This work provides a novel alternative strategy for efficient construction of lanthanide-grafted COFs and may promote the development of porous organic materials based chemical sensing.

Near-Infrared Emissive Lanthanide Metal-Organic Frameworks for Targeted Biological Imaging and pH-Controlled Chemotherapy

Near-infrared window II (NIR-II, 1000-1700 nm) imaging displays the advantages in deep-tissue high-contrast imaging in vivo on the strength of the high temporal-spatial resolution and deeper penetration. However, the clinical utility of NIR-II imaging agents is limited by their single function. Herein, for the first time, we report the design of a multifunctional drug delivery system (DDS) assembly, CQ/Nd-MOF@HA nanohybrids, with NIR-II fluorescence (1067 nm), large Stokes shifts, and ultrahigh quantum yield, which combined targeted NIR-II luminescence bioimaging and pH-controlled drug delivery. The nanoscale metal-organic framework (MOF) as a highly promising multifunctional DDS for targeted NIR-II bioimaging and chemotherapy in vitro and in vivo lays the foundation of the MOF-based DDS for further clinical diagnosis and treatment.

Fast Detection of Entacapone by a Lanthanide-Organic Framework with Rhombic Channels

Entacapone (ENT) is a powerful catechol-O-methyl transferase inhibitor that is used for the diagnosis and treatment of Parkinson's syndrome, but the amount used must be well controlled to avoid overtreatment and side effect. Fast and selective detection of ENT needs well-matched energy levels and well-designed sensor-ENT interaction which is highly challenging. In this work, a water stable europium-based metal-organic framework (Eu-TDA) was synthesized to detect ENT by luminescence with excellent reusability and selectivity in the presence of main coexisting and interference species of plasma with a limit of detection of 5.01 μM. The experimental results showed that the luminescence of Eu-TDA can be effectively quenched by ENT via well-designed photoinduced electron transfer mechanism and internal filtration effect mechanism in the system.

Inside-Out/Outside-In Tunability in Nanosized Lanthanide-Based Molecular Cluster-Aggregates: Modulating the Luminescence Thermometry Performance via Composition Control

Modulating the optical property of a material via structural modification is a powerful tool for obtaining the desired optical output. If a material can be tuned inside (core) and outside (outer shell), then the degree of control is greater toward application. Herein, we present a lanthanide-based nanosized molecular cluster aggregate (MCA) that allows fine-tuning of the inner core via composition control akin to nanoparticles. At the same time, the tunable outer shell enables light-harvesting properties similar to molecular systems. As such {Eu₄Tb₁₆}, {Eu₃Gd₅Tb₁₂}, {Eu₂Gd₁₀Tb₈}, and {Eu₁Gd₁₅Tb₄} compositions were synthesized, and their photophysical properties were investigated in solution and in the solid state. Controlling the composition and spacing of the emitter ions with the optically silent Gd^III ions results in a decrease in the Tb^III → Eu^III energy-transfer process efficiency. Consequently, ratiometric luminescence thermometry performance is fine-tuned to reach a maximum relative sensitivity of 4.17% °C^-1 at 36 °C for the {Eu₄Tb₁₆} MCA. This study demonstrates that the optical properties are intrinsic to individual MCA species rather than a collective intermolecular effect. The color change observed close to room temperature for {Eu₂Gd₁₀Tb₈} suggests potential applications such as multistage anticounterfeiting technology.

Lanthanide upconversion and downshifting luminescence for biomolecules detection

Biomolecules play critical roles in biological activities and are closely related to various disease conditions. The reliable, selective and sensitive detection of biomolecules holds much promise for specific and rapid biosensing. In recent years, luminescent lanthanide probes have been widely used for monitoring the activity of biomolecules owing to their long luminescence lifetimes and line-like emission which allow time-resolved and ratiometric analyses. In this review article, we concentrate on recent advances in the detection of biomolecule activities based on lanthanide luminescent systems, including upconversion luminescent nanoparticles, lanthanide-metal organic frameworks, and lanthanide organic complexes. We also introduce the latest remarkable accomplishments of lanthanide probes in the design principles and sensing mechanisms, as well as the forthcoming challenges and perspectives for practical achievements.

The coordination chemistry of benzhydrazide with lanthanide(iii) ions: hydrothermal in situ ligand formation, structures, magnetic and photoluminescence sensing properties

The influence of synthetic conditions on the solid-state structural formation of lanthanide(iii) complexes based on a hydrazide ligand have been investigated and reported. Depending on the solvents and reaction temperatures, the reactions of hydrated Ln(NO3)3 with a benzohydrazide (bzz) ligand afforded three classes of lanthanide(iii) coordination complexes viz. [Ln(bzz)(NO3)](NO3)2 (1Ln; Ln = Sm (1), Eu (2), Gd (3), Tb (4), Dy (5)), [Ln(bzz)(ben)3(H2O)]·H2O (2Ln; Ln = Pr (6), Nd (7), Sm (8), Eu (9), Gd (10), Tb (11), Dy (12), Er (13)), and [Ln3(ben)3] (3Ln; Ln = Eu (14), Gd (15), Tb (16), Dy (17), Er (18), Tm (19), Yb (20), Lu (21)). Complexes 1-5 in series 1Ln were isolated by slow evaporation of their isopropanol solutions at ambient temperature, and the complexes display similar discrete structures bearing distinct intermolecular N-H⋯O hydrogen bonds to generate a three-dimensional (3D) supramolecular architecture. Complexes 6-13 in series 2Ln were obtained under hydrothermal conditions at 110 °C where the in situ generated benzoate (ben) ligands participated in the formation of one-dimensional (1D) coordination polymers (CPs) with the bzz ligands. At a temperature of 145 °C the hydrothermal conditions result in the formation of the thermodynamically more stable products of 14-21 in series 3Ln, in which the bzz ligand underwent complete in situ hydrolysis to create the ben ligand. These coordination assemblies feature 1D zigzag chains that are formed by unusual low coordination numbers of the six- and seven-fold coordinated Ln3+ centers bridged by the ben ligands in μ 2- and μ 3-coordination modes. Notably, the chain structures of 2Ln can be transformed into the zigzag tape-like structures of 3Ln upon heating the crystalline samples to 400 °C in air. In the solid state at room temperature, the Eu- (2, 9, 14) and Tb- (4, 11, 16) containing complexes emit red and green light, respectively. The luminescence investigations show that the Eu- (9, 14) and Tb-(11, 16) based CPs could be used as fluorescent probes for acetone and Co2+ ions via an energy competition mechanism. Meanwhile, the Gd- (10, 15) and Dy- (12, 17) based CPs show typical antiferromagnetic interactions.

A near-infrared emitting MOF: controlled encapsulation of a fluorescein sensitizer at the time of crystal growth

We report here a near-infrared (NIR) emitting lanthanide-based metal-organic framework (MOF) in which Yb³⁺ are sensitized by fluorescein (FL) as a low energy absorbing chromophore (FL@CD-MOF-161). The unique design of CD-MOF-161 allows for the entrapment of FL molecules in its pores during the synthesis and crystal growth, ensuring the efficient loading and spreading of chromophores within the crystal volume.

Metal-Organic Frameworks for Liquid Phase Applications

In the last two decades, metal-organic frameworks (MOFs) have attracted overwhelming attention. With readily tunable structures and functionalities, MOFs offer an unprecedentedly vast degree of design flexibility from enormous number of inorganic and organic building blocks or via postsynthetic modification to produce functional nanoporous materials. A large extent of experimental and computational studies of MOFs have been focused on gas phase applications, particularly the storage of low-carbon footprint energy carriers and the separation of CO2-containing gas mixtures. With progressive success in the synthesis of water- and solvent-resistant MOFs over the past several years, the increasingly active exploration of MOFs has been witnessed for widespread liquid phase applications such as liquid fuel purification, aromatics separation, water treatment, solvent recovery, chemical sensing, chiral separation, drug delivery, biomolecule encapsulation and separation. At this juncture, the recent experimental and computational studies are summarized herein for these multifaceted liquid phase applications to demonstrate the rapid advance in this burgeoning field. The challenges and opportunities moving from laboratory scale towards practical applications are discussed.

A hybrid of ultrathin metal-organic framework sheet and ultrasmall copper nanoparticles for detection of hydrogen peroxide with enhanced activity

Here, we design and synthesize a novel 2D Cu-tetrakis(4-carboxyphenyl)porphyrin (TCPP) metal-organic framework (MOF) sheet and ultrasmall Cu_5.4O nanoparticle (Cu_5.4O USNP) hybrid (Cu-TCPP MOF/Cu_5.4O nanocomposite). The graphene-like ultrathin Cu-TCPP MOF sheets offer high surface-to-volume atom ratios and many active sites, which is beneficial for loading more Cu_5.4O USNPs. The Cu_5.4O USNPs with ultrasmall size (<5 nm) have promising conductivity and excellent enzymatic ability for H₂O₂. The successfully prepared nanocomposites are characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) techniques. The 2D graphene-like ultrathin Cu-TCPP MOF sheets show no H₂O₂-sensing signals, whereas Cu_5.4O USNPs exhibit a clear reduction peak for detection of H₂O₂. Interestingly, the combination of two kinds of nanomaterials improved the H₂O₂ sensing ability due to their synergistic effect. The properties of the unmodified electrodes and the Cu-TCPP MOF/Cu_5.4O nanocomposite-modified electrodes were systemically studied by cyclic voltammetry (CV), current-time (i-t) response, and square-wave voltammetry (SWV) techniques. The electrochemical sensor for the detection of H₂O₂ based on the Cu-TCPP MOF/Cu_5.4O nanocomposite has a lower detection limit of 0.13 μmol·L^-1 and wider linear range of 0.1 × 10^-6 ~ 0.59 × 10^-3 mol·L^-1 and 1.59 × 10^-3 ~ 20.59 × 10^-3 mol·L^-1 when compared with the Cu_5.4O USNPs-modified electrode. The electrochemical sensor can be further used to detect H₂O₂ produced by cells. Graphical abstract The mechanism for sensing H₂O₂ produced from cells based on a Cu-TCPP MOF/Cu_5.4O USNPs nanocomposite-modified electrode.