Tailoring Electronic and Optical Properties of MXenes through Forming Solid Solutions

Synthesis of Three Isoelemental MXenes and Their Structure-Property Relationships

The MXene family has rapidly expanded since its discovery in 2011 to include nearly 50 unique MXenes, not accounting for solid solutions and diverse surface terminations. However, a question raised since their discovery has been: What is the effect of n? In other words, how does the number of layers affect the MXene properties? To date, no direct study of the impact of n has been conducted due to the lack of isoelemental MXene compositions spanning more than two n values. Herein, we report on a system of three MXenes with identical M-site chemistries, (Mo2/3V1/3)n+1CnTx (n = 1, 2, and 3), allowing for the study of MXene structure-property relationships across n, for the first time. Chemical analysis of the samples shows complete and partial ordering of the M-elements in the n = 2 and 3 samples, respectively. We show that sample stability gradually evolves as n is increased from 1 to 3, while electronic and electrochemical properties exhibit more significant changes in going from n = 1 to 2 than from n = 2 to 3.

Water-Driven Stacking Structure Transformation of Ultrathin Ru Nanosheets for Efficient Hydrogen Evolution Reaction

Ultrathin crystalline materials are a class of popular materials that can potentially exhibit fascinating physical and chemical properties dictated by their unique stacking freedom. However, it is challenging to achieve the controllable synthesis over their stacking structure for ultrathin crystalline materials. Herein, water is employed as a key regulatory factor to realize phase engineering in ultrathin nanosheets (NSs), thereby altering stacking faults to achieve distinct stacking arrangements. Ruthenium (Ru) NSs with consistent specific surface areas but different stacking manners are fabricated through the systematic regulation of water. Based on this, it is demonstrated that the hydrogen evolution reaction (HER) performance can be significantly influenced by their stacking structures. Further in-depth investigations reveal that the distinct stacking structures of Ru NSs, featuring a limited area of side facets, will influence the energy barrier of sluggish Volmer step in HER. Ru NSs with ABC stacking exhibit an accelerated Volmer process with outstanding catalytic activity, demonstrating a remarkably low overpotential (25 mV at 10 mA cm-2) and Tafel slope (29 mV dec-1) than most of the reported HER catalysts. The work will advance the understanding of controllable synthesis methods and illuminate the structure-activity relationships in ultrathin crystalline nanomaterials.

Ultrabroadband Optical Properties of 2D Titanium Carbide MXene

MXenes have rapidly ascended as a prominent class of two-dimensional (2D) materials, renowned for their distinctive optical and electrical properties. Despite extensive exploration of MXenes' optical properties, existing studies predominantly focus on the near-infrared (NIR) to the ultraviolet spectral range, leaving the mid-infrared (mid-IR) range relatively uncharted. In this study, we conducted a comprehensive characterization of the intrinsic optical properties of Ti3C2Tx MXene across an ultrabroadband spectral range, spanning from mid-IR (28 meV) to vacuum ultraviolet (VUV, 6.4 eV). For this purpose, Ti3C2Tx MXene films of varying thicknesses were coated on quartz substrates, resulting in two distinct categories: thin film samples with thicknesses below 50 nm and bulk-like samples with thicknesses exceeding 500 nm. Using spectroscopic ellipsometry, we analyzed the optical properties of films of various thicknesses and extracted detailed information on their dielectric functions. Our findings reveal resonances in the mid-IR to VUV range. Employing the Lorentz-Drude model to examine these resonances has uncovered the optical resistivity of MXene films and led to the identification of multiple plasmonic modes active in the visible to NIR range, as well as broad band-to-band transition-like resonances in the mid-IR range. This ultrabroadband optical versatility of Ti3C2Tx MXene is anticipated to bring about a wide range of thermal and optical applications.

Solid-Solution MXenes: Synthesis, Properties, and Applications

ConspectusMXenes, among other two-dimensional (2D) materials such as graphene, hexagonal BN, transition metal dichalcogenides (TMDs), 2D metal-organic frameworks (MOFs), and covalent organic frameworks (COFs), are the fastest growing class discovered thus far. The general formula of MXenes is Mn+1XnTx, where M, X, and Tx represent an early transition metal (Ti, V, Nb, Mo, etc.), C and/or N, and the surface functional groups (typically, O, OH, F, Cl), respectively, and n can be between 1 and 4. MXenes as a class of materials have extraordinary properties, such as high electrical conductivity, nonlinear optical properties, solution processability, scalability and ease of synthesis, redox capability, and tunable surface properties, among others; the specific properties, however, depend on their chemistry. Since the initial report of the first MXene in 2011, the research community has primarily focused on Ti3C2Tx, and the amount of research work to investigate its synthesis and properties has increased exponentially over the years. In materials science, alloying is a useful way of synthesizing new materials to improve the properties of a class of materials. Advancement of steel and synthesis of inorganic semiconductors can be regarded as some of the major historical advancements in the concept of alloying. Thus, just one year after the initial report of MXenes, the first solid-solution MXene, (TiNb)2CTx, was reported, which demonstrates the inherent chemical tunability of this class of materials.MXenes have two sites for compositional variation: elemental substitution on both the metal (M) and carbon/nitrogen (X) sites, presenting promising routes for tailoring their properties. X-site solid-solutions include carbonitride MXenes and are the least studied class of MXenes to date. Comparatively, multi-M MXenes have acquired significant attention, leading to the extreme example of high-entropy solid-solution MXenes. By using multiple M elements, a significant expansion of the structural and chemical diversity is possible, giving rise to novel chemical, magnetic, electronic, and optical properties that cannot be accessed by single-M MXenes. Solid-solution MXenes represent the largest and most tunable class of MXenes; solid-solution MXenes are those that have multiple metals that are randomly distributed on their M sites with no distinct chemical ordering. Using multiple M elements in MXenes, it is possible to synthesize novel MXene structures that cannot be produced otherwise, such as M5X4Tx MXenes. Based on their chemistry, it is possible to rationally control the electronic, optical, mechanical, and chemical properties in a way that no other class of MXenes can. In some cases, the resultant property is linearly related to the chemistry, such as the electrical conductivity, while in other cases the properties are nonlinear or emergent: optical properties, enabling these MXenes to fulfill roles that no other MXene, or 2D material, can.In this Account, we discuss the recent progress in the synthesis, properties, applications, and outlook of solid-solution MXenes. Importantly, we demonstrate how multi-M solid-solutions can be used to tailor properties for specific applications easily.

Development and Biomedical Application of Non-Noble Metal Nanomaterials in SERS

Surface-enhanced Raman scattering (SERS) is vital in many fields because of its high sensitivity, fast response, and fingerprint effect. The surface-enhanced Raman mechanisms are generally electromagnetic enhancement (EM), which is mainly based on noble metals (Au, Ag, etc.), and chemical enhancement (CM). With more and more studies on CM mechanism in recent years, non-noble metal nanomaterial SERS substrates gradually became widely researched and applied due to their superior economy, stability, selectivity, and biocompatibility compared to noble metal. In addition, non-noble metal substrates also provide an ideal new platform for SERS technology to probe the mechanism of biomolecules. In this paper, we review the applications of non-noble metal nanomaterials in SERS detection for biomedical engineering in recent years. Firstly, we introduce the development of some more common non-noble metal SERS substrates and discuss their properties and enhancement mechanisms. Subsequently, we focus on the progress of the application of SERS detection of non-noble metal nanomaterials, such as analysis of biomarkers and the detection of some contaminants. Finally, we look forward to the future research process of non-noble metal substrate nanomaterials for biomedicine, which may draw more attention to the biosensor applications of non-noble metal nanomaterial-based SERS substrates.

Recent Advances in Non-Ti MXenes: Synthesis, Properties, and Novel Applications

One of the most fascinating 2D nanomaterials (NMs) ever found is various members of MXene family. Among them, the titanium-based MXenes, with more than 70% of publication-related investigations, are comparatively well studied, producing fundamental foundation for the 2D MXene family members with flexible properties, familiar with a variety of advanced novel technological applications. Nonetheless, there are still more candidates among transitional metals (TMs) that can function as MXene NMs in ways that go well beyond those that are now recognized. Systematized details of the preparations, characteristics, limitations, significant discoveries, and uses of the novel M-based MXenes (M-MXenes), where M stands for non-Ti TMs (M = Sc, V, Cr, Y, Zr, Nb, Mo, Hf, Ta, W, and Lu), are given. The exceptional qualities of the 2D non-Ti MXene outperform standard Ti-MXene in several applications. There is many advancement in top-down as well as bottom-up production of MXenes family members, which allows for exact control of the M-characteristics MXene NMs to contain cutting-edge applications. This study offers a systematic evaluation of existing research, covering everything in producing complex M-MXenes from primary limitations to the characterization and selection of their applications in accordance with their novel features. The development of double metal combinations, extension of additional metal candidates beyond group-(III-VI)B family, and subsequent development of the 2D TM carbide/TMs nitride/TM carbonitrides to 2D metal boride family are also included in this overview. The possibilities and further recommendations for the way of non-Ti MXene NMs are in the synthesis of NMs will discuss in detail in this critical evaluation.

MXene-Polydopamine-antiCEACAM1 Antibody Complex as a Strategy for Targeted Ablation of Melanoma

Photothermal therapy (PTT) is a method for eradicating tumor tissues through the use of photothermal materials and photosensitizing agents that absorb light energy from laser sources and convert it into heat, which selectively targets and destroys cancer cells while sparing healthy tissue. MXenes have been intensively investigated as photosensitizing agents for PTT. However, achieving the selectivity of MXenes to the tumor cells remains a challenge. Specific antibodies (Ab) against tumor antigens can achieve homing of the photosensitizing agents toward tumor cells, but their immobilization on MXene received little attention. Here, we offer a strategy for the selective ablation of melanoma cells using MXene-polydopamine-antiCEACAM1 Ab complexes. We coated Ti3C2Tx MXene with polydopamine (PDA), a natural compound that attaches Ab to the MXene surface, followed by conjugation with an anti-CEACAM1 Ab. Our experiments confirm the biocompatibility of the Ti3C2Tx-PDA and Ti3C2Tx-PDA-antiCEACAM1 Ab complexes across various cell types. We also established a protocol for the selective ablation of CEACAM1-positive melanoma cells using near-infrared irradiation. The obtained complexes exhibit high selectivity and efficiency in targeting and eliminating CEACAM1-positive melanoma cells while sparing CEACAM1-negative cells. These results demonstrate the potential of MXene-PDA-Ab complexes for cancer therapy. They underline the critical role of targeted therapies in oncology, offering a promising avenue for the precise and safe treatment of melanoma and possibly other cancers characterized by specific biomarkers. Future research will aim to refine these complexes for clinical use, paving the way for new strategies for cancer treatment.

Sequential Cascade Doping of Conjugated-Polymer-Wrapped Carbon Nanotubes for Highly Electrically Conductive Platforms

To explore a highly conductive flexible platform, this study develops PIDF-BT@SWCNT by wrapping single-walled carbon nanotubes (SWCNTs) with a conjugated polymer, PIDF-BT, known for its effective doping properties. By evaluating the doping behaviors of various dopants on PIDF-BT, appropriate dopant combinations for cascade doping are selected to improve the doping efficiency of PIDF-BT@SWCNT. Specifically, using F4TCNQ or F6TCNNQ as the first dopant, followed by AuCl3 as the second dopant, demonstrates remarkable doping efficiency, surpassing that of the individual dopants and yielding an exceptional electrical conductivity exceeding 6000 S/cm. Characterization using X-ray photoelectron spectroscopy and Raman spectroscopy elucidates the doping mechanism, revealing an increase in the proportion of electron-donating atoms and the ratio of quinoid structures upon F4TCNQ/AuCl3 cascade doping. These findings offer insights into optimizing dopant combinations for cascade doping, showcasing its advantages in enhancing doping efficiency and resulting electrical conductivity compared with single dopant processes.

Ultrasensitive electrochemical sensor based on synergistic effect of Ag@MXene and antifouling cyclic multifunctional peptide for PD-L1 detection in serum

A sensing interface co-constructed from the two-dimensional conductive material (Ag@MXene) and an antifouling cyclic multifunctional peptide (CP) is described. While the large surface area of Ag@MXene loads more CP probes, CP binds to Ag@MXene to form a fouling barrier and ensure the structural rigidity of the targeting sequence. This strategy synergistically enhances the biosensor's sensitivity and resistance to contamination. The SPR results showed that the binding affinity of the CP to the target was 6.23 times higher than that of the antifouling straight-chain multifunctional peptide (SP) to the target. In the 10 mg/mL BSA electrochemical fouling test, the fouling resistance of Ag@MXene + CP (composite sensing interface of CP combined with Ag@MXene) was 30 times higher than that of the bare electrode. The designed electrochemical sensor exhibited good selectivity and wide dynamic response range at PD-L1 concentrations from 0.1 to 50 ng/mL. The lowest detection limit was 24.54 pg/mL (S/N = 3). Antifouling 2D materials with a substantial specific surface area, coupled with non-straight chain antifouling multifunctional peptides, offer a wide scope for investigating the sensitivity and antifouling properties of electrochemical sensors.

Comprehensive synthesis of Ti3C2Tx from MAX phase to MXene

MXenes are a large family of two-dimensional materials that have attracted attention across many fields due to their desirable optoelectronic, biological, mechanical and chemical properties. There currently exist many synthesis procedures that lead to differences in flake size, defects and surface chemistry, which in turn affect their properties. Herein, we describe the steps to synthesize Ti3C2Tx-the most important and widely used MXene, from a Ti3AlC2 MAX phase precursor. The procedure contains three main sections: synthesis of Ti3AlC2 MAX, wet chemical etching of the MAX in hydrofluoric acid/HCl solution to yield multilayer Ti3C2Tx and its delamination into single-layer flakes. Three delamination options are described; these use LiCl, tertiary amines (tetramethyl ammonium hydroxide/ tetrabutyl ammonium hydroxide) and dimethylsulfoxide respectively. These procedures can be adapted for the synthesis of MXenes beyond Ti3C2Tx. The MAX phase synthesis takes about 1 week, with the etching and delamination each requiring 2 d. This protocol requires users to have experience working with hydrofluoric acid, and it is recommended that users have experience with wet chemistry and centrifugation; characterization techniques such as X-ray diffraction and particle size analysis are also essential for the success of the protocol. While alternative synthesis methods, such as minimally intensive layer delamination, are desirable for certain MXenes (such as Ti2CTx) or specific applications, this protocol aims to standardize the more commonly used hydrofluoric acid/HCl etching method, which produces Ti3C2Tx with minimal concentration of defects and the highest conductivity and serves as a guideline for those working with MXenes for the first time.

First-principles study of hydrogen sulfide decomposition on Sc-Ti3C2O2 single-atom catalyst

CONTEXT

Hydrogen sulfide gas poses significant risks to both human health and the environment, with the potential to induce respiratory and neurological effects, and a heightened fatality risk at elevated concentrations. This article investigates the catalytic decomposition of H2S on a Sc-Ti3C2O2 single-atom catalyst(SAC) using the density functional theory-based first-principles calculation approach. Initially, the adsorption behavior of H2S on Ti3C2O2-MXene was examined, revealing weak physical adsorption between them. Subsequently, the transition metal atom Sc was introduced to the Ti3C2O2 surface, and its stability was studied, demonstrating high stability. Further exploration of H2S adsorption on Sc-Ti3C2O2 revealed direct dissociation of H2S gas molecules into HS* and H*, with HS* binding to Sc and H* binding to O on the Ti3C2O2 surface, resulting in OH groups. Using the transition state search method, the dissociation of H2S molecules on the SAC's surface was investigated, revealing a potential barrier of 2.45 eV for HS* dissociation. This indicates that the H2S molecule can be dissociated into H2 and S with the action of the Sc-Ti3C2O2 SAC. Moreover, the S atom left on the catalyst surface can aggregate to produce elemental S8, desorbing on the catalyst surface, completing the catalytic cycle. Consequently, the Sc-Ti3C2O2 SAC is poised to be an efficient catalyst for the catalytic decomposition of H2S.

METHODS

The Dmol3 module in Materials Studio software based on density functional theory is used in this study. The generalized gradient approximation method GGA-PBE is used for the exchange-correlation function. The complete LST/QST and the NEB methods in the Dmol3 module were used to study the minimum energy path of the dissociation of hydrogen sulfide molecules on the catalyst surface.

Oxidation of Molybdenum-Based Single-Metallic/bimetallic Carbide MXenes in Aqueous Suspensions: Mechanistic Insights

Molybdenum carbide MXenes have garnered considerable attention in electronics, energy storage, and catalysis. However, they are prone to oxidative degradation, but the associated mechanisms have not been systematically explored. Therefore, the oxidation mechanisms of Mo-based single-metallic/bimetallic carbide MXenes including Mo2CTx, Mo2TiC2Tx, and Mo2Ti2C3Tx in aqueous suspensions were investigated for the first time in this study. Similar to Ti3C2Tx MXene, Mo-based MXenes were found to undergo oxidative degradation in their aqueous dispersions, leading to the disruption of their crystal structure and subsequent loss of optical and electronic properties. Notably, the Mo2CTx MXene deviated from this typical oxidation behavior as it produced an amorphous product with Mo ions instead of highly crystalline Mo-oxides during oxidation. Similarly, the Mo2TiC2Tx and Mo2Ti2C3Tx MXenes did not yield crystalline Mo-oxides; instead, they produced highly crystalline anatase TiO2 and a Mo-ion-containing amorphous product simultaneously. Furthermore, high-temperature annealing of the oxidized Mo2CTx MXene powder at 800 °C transformed the amorphous Mo-containing product into highly crystalline MoO2 crystals. These findings highlight the unconventional oxidation behavior of Mo-based MXenes, which suggests that the formation of crystalline Mo-based oxides requires a higher activation energy during oxidation than that of TiO2. The unique oxidative pathway reported herein can help elucidate the oxidation mechanisms of Mo-based MXene dispersions and their products. The insights from this study can pave the way for fundamental studies in academia as well as broaden the applications of Mo-based MXenes in various industries.

Dual-Phase Structure through Selective Etching of the Double A-Element MAX Phase in Lewis Acidic Molten Salts

Two-dimensional (2D) MXene materials with innovative properties and versatile applications have gained immense popularity among scientists. The green and environmentally friendly Lewis acid salt etching route has opened up immense possibilities for the advancement of 2D MXene materials. In this study, we precisely etched the Al element from the double A-element MAX phases Ti2(SnyAl1-y)C by employing Lewis molten salt guided by redox potentials. This approach led to the discovery of a novel Ti2SnyCClx dual-phase structure consisting of Ti2SnC and Ti2CClx. We then established that the etching of the MAX phase via Lewis acid salt is facilitated by the oxidation of M-site elements, with the MX sublayer acting as an electron transmission conduit to enable the oxidation of A-site elements. This work is dedicated to unraveling the underlying mechanisms governing the etching processes using Lewis molten salt, thereby contributing to a more profound comprehension of these innovative etching routes.

Hierarchical Transparent Back Contacts for Bifacial CdTe PV

A hierarchical transparent back contact leveraging an AlGaOx passivating layer, Ti3C2Tx MXene with a high work function, and a transparent cracked film lithography (CFL) templated nanogrid is demonstrated on copper-free cadmium telluride (CdTe) devices. AlGaOx improves device open-circuit voltage but reduces the fill factor when using a CFL-templated metal contact. Including a Ti3C2Tx interlayer improves the fill factor, lowers detrimental Schottky barriers, and enables metallization with CFL by providing transverse conduction into the nanogrid. The bifacial performance of an AlGaOx/Ti3C2Tx/CFL gold contact is evaluated, reaching 19.5% frontside efficiency and 2.8% backside efficiency under 1-sun illumination for a copper-free, group-V doped CdTe device. Under dual illumination, device power generation reached 200 W/m2 with 0.1 sun backside illumination.

Fluorine-Free MXenes: Recent Advances, Synthesis Strategies, and Mechanisms

MXenes, an exceptional class of 2D materials, possess high conductivity, adaptable surface chemistry, mechanical strength, and tunable bandgaps, making them attractive for diverse applications. Unlocking the potential of MXenes requires precise control over synthesis methods and surface functionality. Conventionally, fluorine-based etchants are used in MXenes synthesis, posing both environmental concerns and alterations to surface properties, along with the introduction of certain defects. This prompts the exploration of innovative fluorine-free strategies for MXenes synthesis. This review focuses on environmentally friendly, fluorine-free techniques for MXene synthesis, emphasizing mechanisms and recent breakthroughs in alternative etching strategies. The comprehensive coverage includes electrochemical etching, Lewis acid-driven molten salt etching, alkaline/hydrothermal techniques, chemical vapor deposition (CVD), and recent innovative methods. Fluorine-free MXenes synthesis yields terminations such as ─O, ─OH, ─Cl, etc., influencing surface chemistry and improving their properties. The presence of ─OH groups in NaOH etched MXenes boosts their energy storage, while ─Cl functionality from Lewis acidic salts optimizes electrochemical performance. Fluorine-free methods mitigate adverse effects of ─F terminations on MXene conductivity, improving electronic properties and broadening their applications. In addition to traditional approaches, this review delves into novel fluorine-free methods for tailoring MXenes properties. It comprehensively addresses challenges, opportunities, and future perspectives in fluorine-free MXenes.

Recent advances in the application of MXenes for neural tissue engineering and regeneration

Transition metal carbides and nitrides (MXenes) are crystal nanomaterials with a number of surface functional groups such as fluorine, hydroxyl, and oxygen, which can be used as carriers for proteins and drugs. MXenes have excellent biocompatibility, electrical conductivity, surface hydrophilicity, mechanical properties and easy surface modification. However, at present, the stability of most MXenes needs to be improved, and more synthesis methods need to be explored. MXenes are good substrates for nerve cell regeneration and nerve reconstruction, which have broad application prospects in the repair of nervous system injury. Regarding the application of MXenes in neuroscience, mainly at the cellular level, the long-term in vivo biosafety and effects also need to be further explored. This review focuses on the progress of using MXenes in nerve regeneration over the last few years; discussing preparation of MXenes and their biocompatibility with different cells as well as the regulation by MXenes of nerve cell regeneration in two-dimensional and three-dimensional environments in vitro. MXenes have great potential in regulating the proliferation, differentiation, and maturation of nerve cells and in promoting regeneration and recovery after nerve injury. In addition, this review also presents the main challenges during optimization processes, such as the preparation of stable MXenes and long-term in vivo biosafety, and further discusses future directions in neural tissue engineering.

Bimetallic MXene with tailored vanadium d-band as highly efficient electrocatalyst for reversible lithium-oxygen battery

Lithium-oxygen (Li-O2) battery possesses high theoretical energy density of ∼ 3500 Wh kg-1, yet the sluggish kinetics of oxygen redox reactions hinder its practical application. Herein, TiVC bimetallic MXene solid solution is prepared as the efficient electrocatalyst for Li-O2 battery. The results of experiment and theoretical calculations reveal that through the formation of Ti-C-V bond in TiVC, electrons transfer from V site to Ti site enhances electron delocalization of V sites, which causes the upshift of d band center of V site and strengthens the adsorption of intermediate products (LiO2) on TiVC electrode surface. Due to the strong adsorption of intermediates, the film-like Li2O2 can be formed on TiVC electrode via the surface-adsorbed pathway, which ensures the full contact between the electrode and discharged product and thus facilitates the charge transfer between TiVC electrode and oxygen species during charge process. As a consequence, the TiVC based Li-O2 battery exhibits superior electrochemical performance including large discharge capacity (12780 mAh/g) and extended cycling stability (422 cycles) at the current density of 300 mA g-1.

Manipulation of electrochemical properties of MXene electrodes for supercapacitor applications by chemical and magnetic disorder

The potential of two-dimensional MXenes as electrodes in supercapacitor applications has been studied extensively. However, the role of chemical and magnetic disorder in their electrochemical parameters, e.g., capacitance, has not been explored yet. In this work, we have systematically addressed this for V2-xMnxCO2 MXene solid solutions with an analysis based upon the results from first-principles electronic structure calculations. We find that the variations in the total capacitance over a voltage window depend on the degree of chemical and magnetic disorder. In the course of our investigation, it was also found that the magnetic structure on the surface can substantially influence the redox charge transfer, an as yet unexplored phenomenon. A significantly large charge transfer and thus a large capacitance can be obtained by manipulating the chemical composition and the magnetic order of the surfaces. These findings can be useful in designing operational supercapacitor electrodes with magnetic constituents.

MXene-based electrochemical devices applied for healthcare applications

The initial part of the review provides an extensive overview about MXenes as novel and exciting 2D nanomaterials describing their basic physico-chemical features, methods of their synthesis, and possible interfacial modifications and techniques, which could be applied to the characterization of MXenes. Unique physico-chemical parameters of MXenes make them attractive for many practical applications, which are shortly discussed. Use of MXenes for healthcare applications is a hot scientific discipline which is discussed in detail. The article focuses on determination of low molecular weight analytes (metabolites), high molecular weight analytes (DNA/RNA and proteins), or even cells, exosomes, and viruses detected using electrochemical sensors and biosensors. Separate chapters are provided to show the potential of MXene-based devices for determination of cancer biomarkers and as wearable sensors and biosensors for monitoring of a wide range of human activities.

Anisotropic Superconducting Nb2 CTx MXene Processed by Atomic Exchange at the Wafer Scale

Superconductivty has recently been induced in MXenes through surface modification. However, the previous reports have mostly been based on powders or cold-pressed pellets, with no known reports on the intrinsic superconsucting properties of MXenes at the nanoale. Here, it is developed a high-temperature atomic exchange process in NH3 atmosphere which induces superconductivity in either singleflakes or thin films of Nb2 CTx MXene. The exchange process between nitrogen atoms and fluorine, carbon, and oxygen atoms in the MXene lattice and related structural adjustments are studied using both experiments and density functional theory. Using either single-flake or thin-film devices, an anisotropic magnetic response of the 2D superconducting transformation has been successfully revealed. The anisotropic superconductivity is further demonstrated using superconducting thin films uniformly deposited over a 4 in. wafers, which opens up the possibility of scalable MXene-based superconducting devices.

Functional MXenes: Progress and Perspectives on Synthetic Strategies and Structure-Property Interplay for Next-Generation Technologies

MXenes are a class of 2D materials that include layered transition metal carbides, nitrides, and carbonitrides. Since their inception in 2011, they have garnered significant attention due to their diverse compositions, unique structures, and extraordinary properties, such as high specific surface areas and excellent electrical conductivity. This versatility has opened up immense potential in various fields, catalyzing a surge in MXene research and leading to note worthy advancements. This review offers an in-depth overview of the evolution of MXenes over the past 5 years, with an emphasis on synthetic strategies, structure-property relationships, and technological prospects. A classification scheme for MXene structures based on entropy is presented and an updated summary of the elemental constituents of the MXene family is provided, as documented in recent literature. Delving into the microscopic structure and synthesis routes, the intricate structure-property relationships are explored at the nano/micro level that dictate the macroscopic applications of MXenes. Through an extensive review of the latest representative works, the utilization of MXenes in energy, environmental, electronic, and biomedical fields is showcased, offering a glimpse into the current technological bottlenecks, such asstability, scalability, and device integration. Moreover, potential pathways for advancing MXenes toward next-generation technologies are highlighted.

Iron Oxide Nanoparticle-Assisted Delamination of Ti3C2Tx MXenes: A New Approach to Produce Magnetic MXene-Based Composites

Ti3C2Tx MXene is one of the most comprehensively studied 2D materials in terms of its adsorptive, transport, and catalytic properties, cytotoxic performance, etc. Still, conventional MXene synthesis approaches provide low single-flake MXene yield and frequently uncontrollable properties, demanding further post-processing. The MXene family also lacks magnetism, which is helpful for producing effective nanoadsorbents as their magnetic decantation is the cheapest and most convenient way to remove the spent adsorbent from water. Composite materials consisting of magnetic nanoparticles grown on top of MXene flakes are commonly used to provide magnetic properties to the resulting nanocomposite. In this paper, we study the possibility to delaminate multilayer Ti3C2Tx MXene sheets directly by growing iron oxide magnetic nanoparticles inside their interlayer spacing. We find out that, with a mass fraction of particles comparable or exceeding that of MXenes, their growth is accompanied by an effective enhancement of single-layer MXene yield and suitable magnetic properties of the resulting composite. The developed approach can be further used for simplifying synthesis protocols to obtain magnetic MXene-based nanoadsorbents with tunable properties.

Atomic Scale Design of MXenes and Their Parent Materials─From Theoretical and Experimental Perspectives

More than a decade after the discovery of MXene, there has been a remarkable increase in research on synthesis, characterization, and applications of this growing family of two-dimensional (2D) carbides and nitrides. Today, these materials include one, two, or more transition metals arranged in chemically ordered or disordered structures of three, five, seven, or nine atomic layers, with a surface chemistry characterized by surface terminations. By combining M, X, and various surface terminations, it appears that a virtually endless number of MXenes is possible. However, for the design and discovery of structures and compositions beyond current MXenes, one needs suitable (stable) precursors, an assessment of viable pathways for 3D to 2D conversion, and utilization or development of corresponding synthesis techniques. Here, we present a critical and forward-looking review of the field of atomic scale design and synthesis of MXenes and their parent materials. We discuss theoretical methods for predicting MXene precursors and for assessing whether they are chemically exfoliable. We also summarize current experimental methods for realizing the predicted materials, listing all verified MXenes to date, and outline research directions that will improve the fundamental understanding of MXene processing, enabling atomic scale design of future 2D materials, for emerging technologies.

Preparation and properties of novel binary and ternary highly amorphous poly(vinyl alcohol)-based composites with hybrid nanofillers

Smart protective coatings and devices are currently of great interest. In particular, they can absorb or reflect harmful waves of electromagnetic interference (EMI). In this work, novel binary and ternary composites with highly amorphous poly(vinyl alcohol) (HAVOH) as a matrix and single-walled carbon nanotubes (SWCNTs) and MXenes as nanofillers were prepared. HAVOH is a recently patented kind of poly(vinyl alcohol) (PVOH) that was modified with diol monomers. MXenes are a new type of inorganic two-dimensional (2D) nanoparticle consisting of carbides, nitrides and carbonitrides. Three series of composites, HAVOH/SWCNTs, HAVOH/MXenes and HAVOH/SWCNTs/MXenes, were prepared using the solvent casting method. Samples were tested with various methods to study their structure, electrical properties, thermal behavior and EMI-shielding properties. HAVOH/3.0 wt.% SWCNTs/3.0 wt.% MXene specimens revealed a shielding effectiveness of 55 dB, which is 122 times better than that of the neat matrix. These results are promising for the fabrication of films with protective effects against EMI.

Quantum anomalous valley Hall effect in ferromagnetic MXenes with asymmetric functionalization

The potential to detect and manipulate the valley degree of freedom within two-dimensional hexagonal lattices possessing both inversion asymmetry and time-reversal symmetry is theoretically feasible. Intrinsic ferrovalley polarization in MXenes could be induced by asymmetric surface functionalization to break their inversion symmetry and the presence of spin-orbital coupling ensures their time-reversal symmetry. Our results indicate that the ferromagnetic Cr2COF MXene with Janus functionalization becomes an intrinsic Chern insulator with large spin-valley polarization and belongs to the family of quantum anomalous valley Hall effect (QAVHE) materials, based on Berry curvature and edge state calculations. Applying chemical engineering of functionalization to magnetic MXenes allows us to tune the structure-property relationship in 2D layers to obtain desirable spin-valley coupling. Our theoretical insight into the QAVHE on magnetic MXenes with asymmetry functionalization provides a new opportunity for valleytronics and spintronics.

Interface plasmon damping in the Cd33Se33/Ti2C MXene heterostructure

MXenes, a class of two-dimensional materials, have shown immense potential in various applications such as energy storage, electromagnetic shielding, solar cells, smart fabrics, optoelectronics, and plasmonics. In this study, we employ first-principles density functional theory (DFT) and time-dependent DFT calculations to investigate a semiconductor-metal heterostructure composed of a Cd33Se33 cluster and Ti2C MXene monolayer flakes. Our research focuses on the formation and damping of localized surface plasmon resonances (LSPRs) within this heterostructure. We discover that the Cd33Se33/Ti2C interface gives rise to a Schottky barrier. Importantly, this interface formation results in the damping of the Ti2C LSPR, thereby facilitating the transfer of electrons into the Cd33Se33 cluster. By directly visualizing the LSPR damping phenomenon, our study enhances our understanding of the semiconductor-MXene interface and provides novel insights for the design of MXene-based photocatalysts.

Synthesis of Three Families of Titanium Carbonitride MXenes

Layered MAX phases and two-dimensional (2D) MXenes derived from them are among the most studied materials due to their attractive properties and numerous potential applications. The tunability of their structure and composition allows for every property to be modulated over a wide range. Particularly, elemental replacement and formation of a solid solution without changing the structure allow fine-tuning of material properties. While solid solutions on the M (metal) site have received attention, the partial replacement of carbon with nitrogen (carbonitrides) has received little attention. By applying this concept, herein we report the synthesis of three families of titanium carbonitride Tin+1Al(C1-yNy)n MAX phases and Tin+1(C1-yNy)nTx MXenes with one, two, and three C/N layers. This greatly expands the variety of known MAX phases and MXenes to encompass 16 titanium carbonitrides with tunable X-site chemistries and different 2D layer thicknesses, including MXenes in the Ti4(C1-yNy)3Tx system, which have not been previously reported. We further investigated the relationship among the composition, structure, stability, and synthesis conditions of the MXenes and their respective Al-based MAX phases. This range of materials will enable fundamental studies of the N/C ratio effect on optoelectronic, electromagnetic, and mechanical properties of MXenes, as well as tuning those properties for specific applications.

Triple-enhanced Raman scattering sensors from flexible MXene/Au nanocubes platform via attenuating the coffee ring effect

Developing substrates that combine sensitivity and signal stability is a major challenge in surface enhanced Raman scattering (SERS) research. Herein, we present a flexible triple-enhanced Raman Scattering MXene/Au nanocubes (AuNCs) sensor fabricated by selective filtration of Ti3C2Tx MXene/AuNCs hybrid on the Ti3C2Tx MXene membrane and subsequent treatment with 1H,1H,2H,2H-perfluoro-octyltriethoxysilane (FOTS). The resultant superhydrophobic MXene/AuNCs-FOTS membrane not only provides the SERS substrate with environmental stability, but also imparts analyte enrichment to enhance the sensitivity (LOD = 1 × 10-14 M) and reliability (RSD = 6.41%) for Rhodamine 6G (R6G) molecules owing to the attenuation of the coffee ring effect. Moreover, the triple enhancement mechanism of combining plasmonic coupling enhancement from plasmonic coupling (EM) of nearby AuNCs at lateral and longitudinal direction of MXene/AuNCs-FOTS membrane, charge transfer (CT) from Ti3C2Tx MXene and target molecules and analyte enrichment function provides the substrate with excellent SERS performance (EF = 3.19 × 109), and allows efficient quantification of biomarkers in urine. This work could provide new insights into MXenes as building blocks for high-performance substrates and fill existing gaps in SERS techniques.

Optically Active MXenes in Van der Waals Heterostructures

The vertical integration of distinct 2D materials in van der Waals (vdW) heterostructures provides the opportunity for interface engineering and modulation of electronic as well as optical properties. However, scarce experimental studies reveal many challenges for vdW heterostructures, hampering the fine-tuning of their electronic and optical functionalities. Optically active MXenes, the most recent member of the 2D family, with excellent hydrophilicity, rich surface chemistry, and intriguing optical properties, are a novel 2D platform for optoelectronics applications. Coupling MXenes with various 2D materials into vdW heterostructures can open new avenues for the exploration of physical phenomena of novel quantum-confined nanostructures and devices. Therefore, the fundamental basis and recent findings in vertical vdW heterostructures composed of MXenes as a primary component and other 2D materials as secondary components are examined. Their robust designs and synthesis approaches that can push the boundaries of light-harvesting, transition, and utilization are discussed, since MXenes provide a unique playground for pursuing an extraordinary optical response or unusual light conversion features/functionalities. The recent findings are finally summarized, and a perspective for the future development of next-generation vdW multifunctional materials enriched by MXenes is provided.

M5X4: A Family of MXenes

MXenes are two-dimensional (2D) transition metal carbides, nitrides, and carbonitrides typically synthesized from layered MAX-phase precursors. With over 50 experimentally reported MXenes and a near-infinite number of possible chemistries, MXenes make up the fastest-growing family of 2D materials. They offer a wide range of properties, which can be altered by their chemistry (M, X) and the number of metal layers in the structure, ranging from two in M2XTx to five in M5X4Tx. Only one M5X4 MXene, Mo4VC4, has been reported. Herein, we report the synthesis and characterization of two M5AX4 mixed transition metal MAX phases, Ti2.5Ta2.5AlC4 and Ti2.675Nb2.325AlC4, and their successful topochemical transformation into Ti2.5Ta2.5C4Tx and Ti2.675Nb2.325C4Tx MXenes. The resulting MXenes were delaminated into single-layer flakes, analyzed structurally, and characterized for their thermal and optical properties. This establishes a family of M5AX4 MAX phases and their corresponding MXenes. These materials were experimentally produced based on guidance from theoretical predictions, leading to more exciting applications for MXenes.

Can MXene be the Effective Nanomaterial Family for the Membrane and Adsorption Technologies to Reach a Sustainable Green World?

Environmental pollution has intensified and accelerated due to a steady increase in the number of industries, and exploring methods to remove hazardous contaminants, which can be typically divided into inorganic and organic compounds, have become inevitable. Therefore, the development of efficacious technology for the separation processes is of paramount importance to ensure the environmental remediation. Membrane and adsorption technologies garnered attention, especially with the use of novel and high performing nanomaterials, which provide a target-specific solution. Specifically, widespread use of MXene nanomaterials in membrane and adsorption technologies has emerged due to their intriguing characteristics, combined with outstanding separation performance. In this review, we demonstrated the intrinsic properties of the MXene family for several separation applications, namely, gas separation, solvent dehydration, dye removal, separation of oil-in-water emulsions, heavy metal ion removal, removal of radionuclides, desalination, and other prominent separation applications. We highlighted the recent advancements used to tune separation potential of the MXene family such as the manipulation of surface chemistry, delamination or intercalation methods, and fabrication of composite or nanocomposite materials. Moreover, we focused on the aspects of stability, fouling, regenerability, and swelling, which deserve special attention when the MXene family is implemented in membrane and adsorption-based separation applications.

2D Layered Materials for Fast-Charging Lithium-Ion Battery Anodes

The development of electric vehicles has received worldwide attention in the background of reducing carbon emissions, wherein lithium-ion batteries (LIBs) become the primary energy supply systems. However, commercial graphite-based anodes in LIBs currently confront significant difficulty in enduring ultrahigh power input due to the slow Li+ transport rate and the low intercalation potential. This will, in turn, cause dramatic capacity decay and lithium plating. The 2D layered materials (2DLMs) recently emerge as new fast-charging anodes and hold huge promise for resolving the problems owing to the synergistic effect of a lower Li+ diffusion barrier, a proper Li+ intercalation potential, and a higher theoretical specific capacity with using them. In this review, the background and fundamentals of fast-charging for LIBs are first introduced. Then the research progress recently made for 2DLMs used for fast-charging anodes are elaborated and discussed. Some emerging research directions in this field with a short outlook on future studies are further discussed.

Extending the Chemistry of Layered Solids and Nanosheets: Chemistry and Structure of MAX Phases, MAB Phases and MXenes

MAX phases are layered solids with unique properties combining characteristics of ceramics and metals. MXenes are their two-dimensional siblings that can be synthesized as van der Waals-stacked and multi-/single-layer nanosheets, which possess chemical and physical properties that make them interesting for a plethora of applications. Both families of materials are highly versatile in terms of their chemical composition and theoretical studies suggest that many more members are stable and can be synthesized. This is very intriguing because new combinations of elements, and potentially new structures, can lead to further (tunable) properties. In this review, we focus on the synthesis science (including non-conventional approaches) and structure of members less investigated, namely compounds with more exotic M-, A-, and X-elements, for example nitrides and (carbo)nitrides, and the related family of MAB phases.

MXene and Carbon-Based Electrodes of Thermocells for Continuous Thermal Energy Harvest

Low-grade heat represents a significant form of energy loss; thermocells (TECs) utilizing the thermogalvanic effect can convert thermal energy into electricity without generating vibrations, noise, or waste emissions, making them a promising energy conversion technology for efficiently harvesting low-grade heat. Despite recent advancements, the reliance on high-cost platinum electrodes in TECs has considerably hindered their widespread adoption. Developing cost-effective electrodes that maintain the same thermoelectrochemical performance is crucial for the successful application of TECs. In this review article, the exploration of MXene materials as TEC electrodes is discussed first, emphasizing the immense potential of the MXene family for low-grade heat harvesting applications. Next, recent research on carbon-based electrodes is summarized, and morphological and structural optimizations are comprehensively discussed aiming at enhancing the thermoelectrochemical performance of TECs. In the concluding section, the challenges are outlined and future perspectives are offered, which provide valuable insights into the ongoing development of high-performance TEC electrodes using MXene and carbon-based materials.

Two-Dimensional MXenes Derived from Medium/High-Entropy MAX Phases M2 GaC (M = Ti/V/Nb/Ta/Mo) and their Electrochemical Performance

Two-dimensional (2D) transition metal carbides and/or nitrides, MXenes, are prepared by selective etching of the A-site atomically thin metal layers from their MAX phase precursors. High entropy MXenes, the most recent subfamily of MXenes, are in their infancy and have attracted great interest recently. They are currently synthesized mainly through wet chemical etching of Al-containing MAX phases, while various MAX phases with A-sites elements other than Al have not been explored. It is important to embody non-Al MAX phases as precursors for the high entropy MXenes synthesis to allow for new compositions. In this work, it is reported on the design and synthesis of Ga-containing medium/high entropy MAX phases and then their corresponding medium/high entropy MXenes. Gallium atomic layer etching is carried out using a Lewis acid molten salt (CuCl2). The as-prepared (Ti1/4 V1/4 Nb1/4 Ta1/4 )2 CTx exhibits a Li+ specific capacity of ≈400 mAh g-1 . For (Ti1/5 V1/5 Nb1/5 Ta1/5 Mo1/5 )2 CTx a specific capacity of 302 mAh g-1 is achieved after 300 cycles, and high cycling stability is observed at high current densities. This work is of great significance for expanding the family members of MXenes with tunable chemistries and structures.

Regulating d-Band Center of Ti2 C MXene Via Nb Alloying for Stable and High-Efficient Supercapacitive Performances

Ti2 C MXene with the lowest formula weight is expected to gain superior advantages in gravimetric capacitances over other heavier MXenes. Nevertheless, its poor chemical and electrochemical stability is the most fatal drawback and seriously hinders its practical applications. Herein, an alloy engineering strategy at the transition metal-sites of Ti2 C MXene is proposed. Theoretical calculations reveal that the electronic redistribution of the solid-solution TiNbC MXene improves the electronic conductivity, induces the upward d-band center, tailors the surface functional groups, and increases the electron loss impedance, resulting in its excellent capacitive performance and high chemical stability. The as-prepared flexible TiNbC film delivers specific capacitance up to 381 F g-1 at a scan rate of 2 mV s-1 and excellent electrochemical stability without capacitance loss after 10000 charge/discharging cycles. This work provides a universal approach to develop high-performance and chemically stable MXene electrodes.

Photocatalytic Activity of the Oxidation Stabilized Ti3 C2 Tx MXene in Decomposing Methylene Blue, Bromocresol Green and Commercial Textile Dye

Two-dimensional MXenes are excellent photocatalysts. However, their low oxidation stability makes controlling photocatalytic processes challenging. For the first time, this work elucidates the influence of the oxidation stabilization of model 2D Ti3 C2 Tx MXene on its optical and photocatalytic properties. The delaminated MXene is synthesized via two well-established approaches: hydrofluoric acid/tetramethylammonium hydroxide (TMAOH-MXene) and minimum intensive layer delamination with hydrochloric acid/lithium fluoride (MILD-MXene) and then stabilized by L-ascorbic acid. Both MXenes at a minimal concentration of 32 mg L-1 show almost 100% effectiveness in the 180-min photocatalytic decomposition of 25 mg L-1 model methylene blue and bromocresol green dyes. Industrial viability is achieved by decomposing a commercial textile dye having 100 times higher concentration than that of model dyes. In such conditions, MILD-MXene is the most efficient due to less wide optical band gap than TMAOH-MXene. The MILD-MXene required only few seconds of UV light, simulated white light, or 500 nm (cyan) light irradiation to fully decompose the dye. The photocatalytic mechanism of action is associated with the interplay between surface dye adsorption and the reactive oxygen species generated by MXene under light irradiation. Importantly, both MXenes are successfully reused and retained approximately 70% of their activity.

Effect of Substitutional Oxygen on Properties of Ti3 C2 Tx MXene Produced Using Recycled TiO2 Source

MXenes are an emerging class of 2D materials with unique properties including metallic conductivity, mechanical flexibility, and surface tunability, which ensure their utility for diverse applications. However, the synthesis of MXenes with high crystallinity and atomic stoichiometry in a low-cost process is still challenging because of the difficulty in controlling the oxygen substitute in the precursors and final products of MXenes, which limits their academic understanding and practical applications. Here, a novel cost-effective method is reported to synthesize a highly crystalline and stoichiometric Ti3 C2 Tx MXene with minimum substitutional oxygen impurities by controlling the amount of excess carbon and time of high-energy milling in carbothermal reduction of recycled TiO2 source. The highest used content (2 wt%) of excess-carbon yields TiC with the highest carbon content and minimal oxygen substitutes, which leads to the Ti3 AlC2 MAX phase with improved crystallinity and atomic stoichiometry, and finally Ti3 C2 Tx MXene with the highest electrical conductivity (11738 S cm-1 ) and superior electromagnetic shielding effectiveness. Additionally, the effects of carbon content and substitutional oxygen on the physical properties of TiC and Ti3 AlC2 are elucidated by density-functional-theory calculations. This inexpensive TiO2 -based method of synthesizing high-quality Ti3 C2 Tx MXene can facilitate large-scale production and thus accelerate global research on MXenes.

Biocompatible and Oxidation-Resistant Ti3 C2 Tx MXene with Halogen-Free Surface Terminations

Surface chemistry influences not only physicochemical properties but also safety and applications of MXene nanomaterials. Fluorinated Ti3 C2 Tx MXene, synthesized using conventional HF-based etchants, raises concerns regarding harmful effects on electronics and toxicity to living organisms. In this study, well-delaminated halogen-free Ti3 C2 Tx flakes are synthesized using NaOH-based etching solution. The transversal surface plasmon mode of halogen-free Ti3 C2 Tx MXene (833 nm) confirmed red-shift compared to conventional Ti3 C2 Tx (752 nm), and the halogen-free Ti3 C2 Tx MXene has a different density of state by the high proportion of -O and -OH terminations. The synthesized halogen-free Ti3 C2 Tx exhibits a lower water contact angle (34.5°) and work function (3.6 eV) than those of fluorinated Ti3 C2 Tx (49.8° and 4.14 eV, respectively). The synthesized halogen-free Ti3 C2 Tx exhibits high biocompatibility with the living cells, as evidenced by no noticeable cytotoxicity, even at very high concentrations (2000 µg mL⁻1 ), at which fluorinated Ti3 C2 Tx caused ≈50% reduction in cell viability upon its oxidation. Additionally, the oxidation stability of halogen-free Ti3 C2 Tx is enhanced unexpectedly, which cumulatively provides a good rationale for pursuing the halogen-free routes for synthesizing MXene materials for their uses in biomedical and therapeutic applications.

In Situ Formed Ti/Nb Nanocatalysts within a Bimetal 3D MXene Nanostructure Realizing Long Cyclic Lifetime and Faster Kinetic Rates of MgH2

Magnesium hydride (MGH) is a high-capacity and low-cost hydrogen storage material; however, slow kinetic rates, high dehydrogenation temperature, and short cycle life hindered its large-scale applications. We proposed a strategy of designing novel delaminated 3D bimetal MXene (d-TiNbCT_x) nanostructure to solve these problems. The on-set dehydrogenation temperature of MGH@d-TiNbCT_x composition was reduced to 150 °C, achieving 7.2 wt % of hydrogen releasing capacity within the range of 150-250 °C. This composition absorbed 7.2 wt % hydrogen within 5 min at 200 °C and 5.5 wt % at 30 °C within 2 h, while the desorption capacity (6.0 wt %) was measured at 275 °C within 7 min. After 150 cycles at 250 °C, the 6.5 wt % capacity was retained with negligible loss of hydrogen content. These results were attributed to the catalytic effect of in situ-formed TiH₂/NbH₂ nanocatalysts, which lead to dissociate the Mg-H bonds and promote of kinetic rates. This unique structure paves great opportunities for designing of highly efficient MGHs/MXene nanocomposites to improve the hydrogen storage performance of MGHs.

MXene/graphene oxide nanocomposites for friction and wear reduction of rough steel surfaces

Development of solid lubricant materials that render reliable performance in ambient conditions, are amenable to industrial size and design complexities, and work on engineered surfaces is reported. These coatings are composed of Ti3C2Tx-Graphene Oxide blends, spray-coated onto bearing steel surfaces. The tribological assessment was carried out in ambient environmental conditions and high contact pressures in a ball-on-disc experimental set-up. The evaluation yielded that the use of Ti3C2Tx-Graphene-Oxide coatings led to substantial reduction in friction down to 0.065 (at 1 GPa contact pressure and 100 mm/s) in comparison to the uncoated of single-component-coated surfaces, surpassing the state-of-the-art. The coatings also provided excellent protection against wear loss of the substrate and counter-face. The results were explained based on the observations from Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and nanoindentation measurements. In operando formation of a dense, hard and stiff, dangling-bond-saturated tribolayer was observed to be the reason for the sustained lubricity even at high test loads and sliding speeds. This report presents the holistic exploration and correlation of structure-property-processing pertaining to the advancement of solid lubrication science.

Recent Advances in 2D Material Theory, Synthesis, Properties, and Applications

Two-dimensional (2D) material research is rapidly evolving to broaden the spectrum of emergent 2D systems. Here, we review recent advances in the theory, synthesis, characterization, device, and quantum physics of 2D materials and their heterostructures. First, we shed insight into modeling of defects and intercalants, focusing on their formation pathways and strategic functionalities. We also review machine learning for synthesis and sensing applications of 2D materials. In addition, we highlight important development in the synthesis, processing, and characterization of various 2D materials (e.g., MXnenes, magnetic compounds, epitaxial layers, low-symmetry crystals, etc.) and discuss oxidation and strain gradient engineering in 2D materials. Next, we discuss the optical and phonon properties of 2D materials controlled by material inhomogeneity and give examples of multidimensional imaging and biosensing equipped with machine learning analysis based on 2D platforms. We then provide updates on mix-dimensional heterostructures using 2D building blocks for next-generation logic/memory devices and the quantum anomalous Hall devices of high-quality magnetic topological insulators, followed by advances in small twist-angle homojunctions and their exciting quantum transport. Finally, we provide the perspectives and future work on several topics mentioned in this review.

Recent catalytic applications of MXene-based layered nanomaterials

The urgent issues related to the catalytic processes and energy applications have accelerated the development of hybrid and smart materials. MXenes are a new family of atomic layered nanostructured materials that require considerable research. Tailorable morphologies, strong electrical conductivity, great chemical stability, large surface-to-volume ratios, tunable structures, among others are some significant characteristics that make MXenes appropriate for various electrochemical reactions, including dry reforming of methane, hydrogen evolution reaction, methanol oxidation reaction, sulfur reduction reaction, Suzuki-Miyaura coupling reaction, water-gas shift reaction, and so forth. MXenes, on the other hand, have a fundamental drawback of agglomeration, as well as poor long-term recyclability and stability. One possibility for overcoming the restrictions is the fusion of nanosheets or nanoparticles with MXenes. Herein, the relevant literature on the synthesis, catalytic stability and reusability, and applications of several MXene-based nanocatalysts are deliberated including the merits and cons of the newer MXene-based catalysts.

Effect of surface functional groups on MXene conductivity

We report the in-plane electron transport in the MXenes (i.e., within the MXene layers) as a function of composition using the density-functional tight-binding method, in conjunction with the non-equilibrium Green's functions technique. Our study reveals that all MXene compositions have a linear relationship between current and voltage at lower potentials, indicating their metallic character. However, the magnitude of the current at a given voltage (conductivity) has different trends among different compositions. For example, MXenes without any surface terminations (Ti3C2) exhibit higher conductivity compared to MXenes with surface functionalization. Among the MXenes with -O and -OH termination, those with -O surface termination have lower conductivity than the ones with -OH surface terminations. Interestingly, conductivity changes with the ratio of -O and -OH on the MXene surface. Our calculated I-V curves and their conductivities correlate well with transmission functions and the electronic density of states around the Fermi level. The surface composition-dependent conductivity of the MXenes provides a path to tune the in-plane conductivity for enhanced pseudocapacitive performance.

Process Controlled Ruthenium on 2D Engineered V-MXene via Atomic Layer Deposition for Human Healthcare Monitoring

In searching for unique and unexplored 2D materials, the authors try to investigate for the very first time the use of delaminated V-MXene coupled with precious metal ruthenium (Ru) through atomic layer deposition (ALD) for various contact and noncontact mode of real-time temperature sensing applications at the human-machine interface. The novel delaminated V-MXene (DM-V₂ CT_x ) engineered ruthenium-ALD (Ru-ALD) temperature sensor demonstrates a competitive sensing performance of 1.11% °C^-1 as of only V-MXene of 0.42% °C^-1 . A nearly threefold increase in sensing and reversibility performance linked to the highly ordered few-layered V-MXene and selective, well-controlled Ru atomic doping by ALD for the successful formation of Ru@DM-V₂ CT_X heterostructure. The advanced heterostructure formation, the mechanism, and the role of Ru have been comprehensively investigated by ultra-high-resolution transmission/scanning transmission electron microscopies coupled with next-generation spherical aberration correction technology and fast, accurate elemental mapping quantifications, also by ultraviolet photoelectron spectroscopy. To the knowledge, this work is the first to use the novel, optimally processed V-MXene over conventionally used Ti-MXene and its surface-internal structure engineering by Ru-ALD process-based temperature-sensing devices function and operational demonstrations. The current work could potentially motivate the development of multifunctional, future, next-generation, safe, personal healthcare electronic devices by the industrially scalable ALD technique.

Facile Tailoring of Surface Terminations of MXenes by Doping Nb Element: Toward Extraordinary Pseudocapacitance Performance

MXenes show promising potential in supercapacitors due to their unique two-dimensional (2D) structure and abundant surface functional groups. However, most studies about MXenes have focused on tailoring surface structures by alternating synthesis methods or post-etch treatments, and little is known about the inherent relationship between surface groups and M elements. Herein, we propose a simple and novel strategy to adjust the surface structure of few-layered MXene flakes by adding a small amount of Nb element. Because of the strong affinity between Nb and O elements, the as-received V_1.8Nb_0.2CT_x and Ti_2.7Nb_0.3C₂T_x MXenes have much fewer -F functional groups and a higher O content than V₂CT_x and Ti₃C₂T_x MXenes, respectively. Thus, both V_1.8Nb_0.2CT_x and Ti_2.7Nb_0.3C₂T_x MXenes show enhanced pseudocapacitance performance. Especially, V_1.8Nb_0.2CT_x delivers an ultrahigh volumetric capacitance of 1698 F/cm³ at a scan rate of 2 mV/s. Moreover, benefiting from the high activity of MAX precursors obtained through a fast self-propagating high-temperature synthesis, the etching time to produce V-based MXenes is much shorter than that in previous reports. Therefore, the results presented here are applicable to the surface engineering and rational design of 2D MXene materials and develop them into promising, cost-effective electrode materials for supercapacitors or other energy-storage equipment.

Structural Engineering Enabled Bimetallic (Ti1- y Nby )2 AlC Solid Solution Structure for Efficient Electromagnetic Wave Absorption in Gigahertz

Microstructures play a critical role to influence the polarization behavior of dielectric materials, which determines the electromagnetic response ability in gigahertz. However, the relationship between them, especially in the solid-solution structures is still absent. Herein, a series of (Ti_{1- y} Nb_y )₂ AlC MAX phase solid solutions with nano-laminated structures have been employed to illuminate the aforementioned problem. The relationship has been investigated by the lattice distortion constructed via tuning the composition from Ti to Nb in the M-site atomic layer. Experimental characterizations indicated that the dielectric response behaviors between declined conduction loss and boosted polarization loss can be well balanced by niobium atom manipulative solid-solution engineering, which is conducive to impedance matching and electromagnetic absorption performance. Theoretical calculation further proved that the origin of electric dipoles is ascribed to the charge density differences resulting from the altered microscopic atomic distribution. As a result, the Ti_1.2 Nb_0.8 AlC exhibits the mostly optimized microwave absorption property, in which a minimum reflection loss of -42 dB and an effective absorption bandwidth of 4.3 GHz under an ultra-thin thickness of 1.4 mm can be obtained. This work provides insight into the structural engineering in modifying electromagnetic response performance at gigahertz and which can be expanded to other solid-solution materials.

Ultrafast Spectroscopy of Plasmons and Free Carriers in 2D MXenes

2D MXenes have diverse and chemically tunable optical properties that arise from an interplay between free carriers, interband transitions, and plasmon resonances. The nature of photoexcitations and their dynamics in three different members of the MXene family, Ti₃ C₂ , Mo₂ Ti₂ C₃ , and Nb₂ C, are investigated using two complementary pump-probe techniques, transient optical absorption, and time-resolved terahertz (THz) spectroscopy. Measurements reveal pronounced plasmonic effects in the visible and near-IR in all three. Optical excitation, with either 400 or 800 nm pulses, results in a rapid increase in lattice temperature, evidenced by a pronounced broadening of the plasmon mode that presents as a plasmon bleach in transient absorption measurements. Observed kinetics of plasmon bleach recovery provide a means to monitor lattice cooling. Remarkably slow cooling, proceeding over hundreds of picoseconds to nanoseconds time scales, implies MXenes have low thermal conductivities. The slowest recovery kinetics are observed in the MXene with the highest free carrier density, viz. Ti₃ C₂ , that supports phonon scattering by free carriers as a possible mechanism limiting thermal conductivity. These new insights into photoexcitation dynamics can facilitate their applications in photothermal solar energy conversion, plasmonic devices, and even photothermal therapy and drug delivery.

Perspectives of 2D MXene Tribology

The large and rapidly growing family of 2D early transition metal carbides, nitrides, and carbonitrides (MXenes) raises significant interest in the materials science and chemistry of materials communities. Discovered a little more than a decade ago, MXenes have already demonstrated outstanding potential in various applications ranging from energy storage to biology and medicine. The past two years have witnessed increased experimental and theoretical efforts toward studying MXenes' mechanical and tribological properties when used as lubricant additives, reinforcement phases in composites, or solid lubricant coatings. Although research on the understanding of the friction and wear performance of MXenes under dry and lubricated conditions is still in its early stages, it has experienced rapid growth due to the excellent mechanical properties and chemical reactivities offered by MXenes that make them adaptable to being combined with other materials, thus boosting their tribological performance. In this perspective, the most promising results in the area of MXene tribology are summarized, future important problems to be pursued further are outlined, and methodological recommendations that could be useful for experts as well as newcomers to MXenes research, in particular, to the emerging area of MXene tribology, are provided.

Advancing MXene Electrocatalysts for Energy Conversion Reactions: Surface, Stoichiometry, and Stability

MXenes, due to their tailorable chemistry and favourable physical properties, have great promise in electrocatalytic energy conversion reactions. To exploit fully their enormous potential, further advances specific to electrocatalysis revolving around their performance, stability, compositional discovery and synthesis are required. The most recent advances in these aspects are discussed in detail: surface functional and stoichiometric modifications which can improve performance, Pourbaix stability related to their electrocatalytic operating conditions, density functional theory and advances in machine learning for their discovery, and prospects in large scale synthesis and solution processing techniques to produce membrane electrode assemblies and integrated electrodes. This Review provides a perspective that is complemented by new density functional theory calculations which show how these recent advances in MXene material design are paving the way for effective electrocatalysts required for the transition to integrated renewable energy systems.