Constructing Uranyl-Specific Nanofluidic Channels for Unipolar Ionic Transport to Realize Ultrafast Uranium Extraction

Revealing the role of interlayer spacing in radioactive-ion sieving of functionalized graphene membranes

Functionalization of graphene enables precise control over interlayer spacing during film formation, thereby enhancing the separation efficiency of radioactive ions in graphene membranes. However, the systematic impact of interlayer spacing of graphene membranes on radioactive-ion separation remains unexplored. This study aims to elucidate how interlayer spacing in functionalized graphene membranes affects the separation of radioactive ions. Utilizing polyamidoxime (PAO) to modify graphene oxide, we controlled the interlayer spacing of graphene membranes. Experimental results indicate that tuning interlayer spacing enables control of the permeation flux of radioactive ions (UO22+ 1.01 × 10-5-8.32 × 10-5 mol/m2·h, and K+ remains stable at 3.60 × 10-4 mol/m2·h), and the K+/UO22+ separation factors up to 36.2 at an interlayer spacing of 8.8 Å. Using density functional theory and molecular dynamics simulations, we discovered that the effective separation is mainly determined via interlayer spacing and the quantity of introduced functional groups, explaining the anomalous high permeation flux of target ions at low interlayer spacing (4.3 Å). This study deepens our comprehension of interlayer spacing within nanoconfined spaces for ion separation and recovery via graphene membranes, offering valuable insights for the design and synthesis of high-performance nanomembrane materials.

An imidazole-based covalent-organic framework enabling a super-efficiency in sunlight-driven uranium extraction from seawater

Uranium extraction from seawater represents an effective way to solve the difficulty of the insufficient uranium supply chain. However, this route is still restricted by the low extraction efficiency of reported adsorbents. Here, we find that reversing the donor-acceptor in imidazole-based COFs (covalent-organic frameworks) would be effective for enhancing the extraction efficiency of uranium. As a result, the TI-COF is found to enable a uranium extraction efficiency up to 8.8 mg g-1 day-1 from seawater under visible light irradiation, exceeding all established adsorbents for such use, and an unprecedented uranium extraction efficiency up to 6.9 mg g-1 day-1 from seawater under natural sunlight.

Unveiling Mechanistic Insight into Accelerating Oxygen Molecule Activation by Oxygen Defects in Co3O4-x/g-C3N4 p-n Heterojunction for Efficient Photo-Assisted Uranium Extraction from Seawater

Photo-assisted uranium extraction from seawater (UES) is regarded as an efficient technique for uranium resource recovery, yet it currently faces many challenges, such as issues like biofouling resistance, low charge separation efficiency, slow carrier transfer, and a lack of active sites. Based on addressing the above challenges, a novel oxygen-deficient Co3O4-x/g-C3N4 p-n heterojunction is developed for efficient photo-assisted uranium extraction from seawater. Relying on the defect-coupling heterojunction synergistic effect, the redistribution of molecular charge density formed the built-in electric field as revealed by DFT calculations, significantly enhancing the separation efficiency of carriers and accelerating their migration rate. Notably, oxygen vacancies served as capture sites for oxygen, effectively promoting the generation of reactive oxygen species (ROS), thereby significantly improving the photo-assisted uranium extraction performance and antibacterial activity. Thus, under simulated sunlight irradiation with no sacrificial reagent added, Co3O4-x/g-C3N4 extracted a high uranium extraction amount of 1.08 mg g-1 from 25 L of natural seawater after 7 days, which is superior to most reported carbon nitride-based photocatalysts. This study elaborates on the important role of surface defects and inerface engineering strategies in enhancing photocatalytic performance, providing a new approach to the development and design of uranium extraction material from seawater.

Polyoxometalate Clusters Confined in Reduced Graphene Oxide Membranes for Effective Ion Sieving and Desalination

Efficient 2D membranes play a critical role in water purification and desalination. However, most 2D membranes, such as graphene oxide (GO) membranes, tend to swell or disintegrate in liquid, making precise ionic sieving a tough challenge. Herein, the fabrication of the polyoxometalate clusters (PW12) intercalated reduced graphene oxide (rGO) membrane (rGO-PW12) is reported through a polyoxometalate-assisted in situ photoreduction strategy. The intercalated PW12 result in the interlayer spacing in the sub-nanometer scale and induce a nanoconfinement effect to repel the ions in various salt solutions. The permeation rate of rGO-PW12 membranes are about two orders of magnitude lower than those through the GO membrane. The confinement of nanochannels also generate the excellent non-swelling stability of rGO-PW12 membranes in aqueous solutions up to 400 h. Moreover, when applied in forward osmosis, the rGO-PW12 membranes with a thickness of 90 nm not only exhibit a high-water permeance of up to 0.11790 L m-2 h-1 bar-1 and high NaCl rejection (98.3%), but also reveal an ultrahigh water/salt selectivity of 4740. Such significantly improved ion-exclusion ability and high-water flux benefit from the multi-interactions and nanoconfinement effect between PW12 and rGO nanosheets, which afford a well-interlinked lamellar structure via hydrogen bonding and van der Waals interactions.

Dynamic Response of Ionic Current in Conical Nanopores

Ionic current rectification (ICR) of charged conical nanopores has various applications in fields including nanofluidics, biosensing, and energy conversion, whose function is closely related to the dynamic response of nanopores. The occurrence of ICR originates from the ion enrichment and depletion in conical pores, whose formation is found to be affected by the scanning rate of voltages. Here, through time-dependent simulations, we investigate the variation of ion current under electric fields and the dynamic formation of ion enrichment and depletion, which can reflect the response time of conical nanopores. The response time of nanopores when ion enrichment forms, i.e., at the "on" state is significantly longer than that with the formation of ion depletion, i.e., at the "off" state. Our simulation results reveal the regulation of response time by different nanopore parameters including the surface charge density, pore length, tip, and base radius, as well as the applied conditions such as the voltage and bulk concentration. The response time of nanopores is closely related to the surface charge density, pore length, voltage, and bulk concentration. Our uncovered dynamic response mechanism of the ionic current can guide the design of nanofluidic devices with conical nanopores, including memristors, ionic switches, and rectifiers.

Emerging Nanomaterials toward Uranium Extraction from Seawater: Recent Advances and Perspectives

Nuclear energy holds great potential to facilitate the global energy transition and alleviate the increasing environmental issues due to its high energy density, stable energy output, and carbon-free emission merits. Despite being limited by the insufficient terrestrial uranium reserves, uranium extraction from seawater (UES) can offset the gap. However, the low uranium concentration, the complicated uranium speciation, the competitive metal ions, and the inevitable marine interference remarkably affect the kinetics, capacity, selectivity, and sustainability of UES materials. To date, massive efforts have been made with varying degrees of success to pursue a desirable UES performance on various nanomaterials. Nevertheless, comprehensive and systematic coverage and discussion on the emerging UES materials presenting the fast-growing progress of this field is still lacking. This review thus challenges this position and emphatically focuses on this topic covering the current mainstream UES technologies with the emerging UES materials. Specifically, this review elucidates the causality between the physiochemical properties of UES materials induced by the intellectual design strategies and the UES performances and further dissects the relationships of materials-properties-activities and the corresponding mechanisms in depth. This review is envisaged to inspire innovative ideas and bring technical solutions for developing technically and economically viable UES materials.

Interlayer manipulation of bio-inspired Ti3C2Tx nanocontainer through intercalation of amino acid molecules to dramatically boosting uranyl hijacking capability from seawater

More than 4.5 billion tons of unconventional uranium resources [UO2(CO3)3]4- are uniformly dissolved in seawater, providing a sustainable and abundant fuel source for the development of nuclear energy. Herein, we presented a rational design and development of Ti3C2Tx nanocontainer inspired by the exceptional selectivity and affinity exhibited by superb-uranyl proteins through amino acid intercalation. The amino acid intercalation of Ti3C2Tx demonstrated exceptional UO22+ capture capacity (Arg-Ti3C2Tx, His-Ti3C2Tx, and Lys-Ti3C2Tx with qmax values of 594.46, 846.04, and 1030.17 mg/g). Furthermore, these intercalated materials exhibited remarkable sequestration efficiency and selectivity (Uinitial = ∼45.2 ∼7636 μg/L; ∼84.45% ∼98.08%; and ∼2.72 ×104 ∼1.28 ×105 KdU value), despite the presence of an overwhelming surplus of Na+, Ca2+, Mg2+, and Co2+ ions. Significantly, even in the 0.3 M NaHCO3 solution and surpassing 103-fold of the Na3VO4 system, the adsorption efficiency of Lys-Ti3C2Tx still achieved a remarkable 63.73% and 65.05%. Moreover, the Lys-Ti3C2Tx can extract ∼30.23 ∼8664.03 μg/g uranium after 24 h contact in ∼13.3 ∼5000 μg/L concentration from uranium-spiked natural seawater. The mechanism analysis revealed that the high binding capability can be attributed to the chelation of carboxyl and amino groups with uranyl ions. This innovative state-of-the-art approach in regulating uranium harvesting capability through intercalation of amino acid molecules provides novel insights for extracting uranium from seawater.

Carboxymethyl cellulose and metal-organic frameworks immobilized into polyacrylamide hydrogel for ultrahigh efficient and selective adsorption U(VI) from seawater

Metal-organic frameworks (MOF)-polymer hybrid hydrogel solves the processable forming of MOF powder and energy consumption of uranium extraction. However, the hybrid hydrogel by conventional synthesis methods inevitably lead to MOF agglomeration, poor filler-polymer interfacial compatibility and slowly adsorption. Herein, we designed that ZIF-67 was implanted into the carboxymethyl cellulose/polyacrylamide (CMC/PAM) by network-repairing strategy. The carboxyl and amino groups on the surface of CMC/PAM drive the uniform growth of ZIF-67 inside the CMC/PAM, which form an array of oriented and penetrating microchannels through coordination bonds. Our strategy eliminate the ZIF-67 agglomeration, increase the interfacial compatibility between MOF and polymer. The method also improve the free and fast diffusion of uranium in CMC/PAM/ZIF-67 hydrogel. According to the experimental, these enhancements synergistically enabled the CMC/PAM/ZIF-67 have a maximum adsorption capacity of 952 mg g-1. The adsorption process of CMC/PAM/ZIF-67 fits well with pseudo-second-order model and Langmuir isotherm. Meanwhile, the CMC/PAM/ZIF-67 maintain a high removal rate (87.3 %) and chemical stability even during ten adsorption-desorption cycles. It is worth noting that the adsorption amount of CMC/PAM/ZIF-67 in real seawater is 9.95 mg g-1 after 20 days, which is an ideal candidate adsorbent for uranium extraction from seawater.

Exploring Electron Transfer Mechanism in Synergistic Interactional Reduced Polyoxometalate-Based Cu(I)-Organic Framework for Photocatalytic Removal of U(VI)

Photocatalytic reduction of U(VI) is a promising method for removing uranium containing pollutants. However, using polyoxometalate-based metal-organic frameworks (POMOFs) for photoreduction of U(VI) is rare, and the relevant charge transfer pathway is also not yet clear. In this article, we demonstrate a highly efficient strategy and revealed a clearly electron transfer pathway for the photoreduction of U(VI) with 99% removal efficiency by using a novel POMOF, [Cu(4,4'-bipy)]5·{AsMo4VMo6VIV2VO40(VIVO)[VIVO(H2O)]}·2H2O (1), as catalyst. The POMOF catalyst was constructed by the connection of reduced {AsMo10V4} clusters and Cu(I)-MOF chains through Cu-O coordination bonds, which exhibits a broader and stronger light absorption capacity due to the presence of reduced {AsMo10V4} clusters. Significantly, the transition of electrons from Cu(I)-MOF to {AsMo10V4} clusters (Cu → Mo/V) greatly inhibits the recombination of photogenerated carriers, thereby advancing electron transfer. More importantly, the {AsMo10V4} clusters are not only adsorption sites but also catalytically active sites. This causes the fast transfer of photogenerated electrons from Mo/V to UO22+(Mo/V → O → U) via the surface oxygen atoms. The shorter electron transmission distance between catalytic active sites and UO22+ achieves faster and more effective electron transport. All in all, the highly effective photocatalytic removal of U(VI) using the POMOF as a catalyst is predominantly due to the synergistic interaction between Cu(I)-MOFs and reduced {AsMo10V4} clusters.

Adsorbents for the Uranium Capture from Seawater for a Clean Energy Source and Environmental Safety: A Review

On the global level, uranium is considered the main nuclear energy source, and its removal from terrestrial ores is enough to last until the end of the current century. Therefore, a major focus is attracted toward the capture of uranium from a sustainable source (seawater). Uranium recovery from seawater has been reported over the last few decades, and recently many efforts have been devoted to the preparation of such adsorbents with higher selectivity and adsorption capacity. The purpose of this review is to report the advancement in adsorbent preparation and modification of porous materials. It also discusses challenges such as adsorbent selectivity, low uranium concentration in seawater, contact time, biofouling, and the solution to the problems necessary to ensure a better adsorption performance of the adsorbent.

One particle three targets: Phosphate anion-modified magnetic mesoporous silica with enhanced fluorescence for sensitive detection, efficient adsorption, and repeated removal of uranium (VI) ions

An ideal adsorbent material that combines the multiple capabilities of sensitive detection, efficient adsorption, and repeatable removal of uranium (U) from the environment remains a serious challenge. Herin, a general method was developed for synthesizing a series of phosphate anions (such as: PO43-, P2O74-, P3O105- and P6O186-) modified magnetic mesoporous silica nanoparticles (Fe3O4 @mSiO2-Zn2+ NPs). The mesoporous surfaces and abundant phosphate groups provide potential, powerful uranium-binding sites for capturing U(VI) ions. Especially, the optimum adsorption capacity of Fe3O4 @mSiO2-Zn2+/P3O105- NPs was as high as 885.90 mg·g-1 (298 K), which was higher than that of unmodified or other phosphate anions-modified Fe3O4 @mSiO2-Zn2+ NPs. Meanwhile, P3O105--binding sites and mesoporous surfaces also strongly restrict U(VI) ions' fluorescence vibrational inactivation, the adsorption results in rapid green fluorescence enhancement (within 180 s), and an ultra-low detection limit (4.5 nmol·L-1), which is well below the standard in drinking water of the World Health Organization (WHO). Furthermore, even after 5 cycles, the adsorbent still maintained their original adsorption capacity of 80.21% and displayed excellent selectivity for detecting and removing U(VI) from seawater. Based on these results, the Fe3O4 @mSiO2-Zn2+/P3O105- NPs seem to be a suitable multifunctional adsorbent for the detection, adsorption, and removal of U(VI) from environment.

Bioinspired FeN5 Sites with Enhanced Peroxidase-like Activity Enable Colorimetric Sensing of Uranyl Ions in Seawater

Nanozymes with peroxidase (POD)-like activity have garnered significant attention due to their exceptional performance in colorimetric assays. However, nanozymes often possess oxidase (OD) and POD-like activity simultaneously, which affects the accuracy and sensitivity of the detection results. To address this issue, inspired by the catalytic pocket of natural POD, a single-atom nanozyme with FeN5 configuration is designed, exhibiting enhanced POD-like activity in comparison with a single-atom nanozyme with FeN4 configuration. The axial N atom in FeN5 highly mimics the amino acid residues in natural POD to optimize the electronic structure of the metal active center Fe, realizing the efficient activation of H2O2. In addition, in the presence of both H2O2 and O2, FeN5 enhances the activation of H2O2, effectively avoiding the interference of dissolved oxygen in colorimetric sensing. As a proof-of-concept application, a colorimetric detection platform for uranyl ions (UO22+) in seawater is successfully constructed, demonstrating satisfactory sensitivity and specificity.

Ultra-selective uranium separation by in-situ formation of π-f conjugated 2D uranium-organic framework

With the rapid development of nuclear energy, problems with uranium supply chain and nuclear waste accumulation have motivated researchers to improve uranium separation methods. Here we show a paradigm for such goal based on the in-situ formation of π-f conjugated two-dimensional uranium-organic framework. After screening five π-conjugated organic ligands, we find that 1,3,5-triformylphloroglucinol would be the best one to construct uranium-organic framework, thus resulting in 100% uranium removal from both high and low concentration with the residual concentration far below the WHO drinking water standard (15 ppb), and 97% uranium capture from natural seawater (3.3 ppb) with a record uptake efficiency of 0.64 mg·g-1·d-1. We also find that 1,3,5-triformylphloroglucinol can overcome the ion-interference issue such as the presence of massive interference ions or a 21-ions mixed solution. Our finds confirm the superiority of our separation approach over established ones, and will provide a fundamental molecule design for separation upon metal-organic framework chemistry.

Polyvinyl alcohol/phytic acid/phosphorylated chitosan hydrogel electrode highly efficient electroadsorption of low concentration uranium from uranium tailings leachate

In order to improve the removal rate of uranium and reduce the harm of radioactive pollution, a physically crosslinked polyvinyl alcohol/phosphorylated chitosan (PPP) hydrogel electrode was designed by freezing thawing method. The results show that PPP hydrogel has a good adsorption effect on uranium, and 200 mL of uranium tailings leachate is absorbed, and the treatment efficiency reaches 100 % within 15 min. PPP hydrogel can adapt to a wide range of pH conditions and exhibit excellent adsorption efficiency in the range of 3-9. At the same time, PPP hydrogel maintains an adsorption efficiency of over 85 % for 950 mg/L uranium solution. This lays the foundation for the practical application of PPP hydrogel. In addition, PPP hydrogel also exhibits good repeatability, after 7 cycles, the material still retains 95 % of its initial performance. The synergistic effect of various functional groups such as phosphate, hydroxyl, and ammonium in the material is the main mechanism of PPP's adsorption capacity for uranium. Furthermore, electrochemical adsorption method significantly enhances the adsorption performance of PPP hydrogel.

Self-Standing Porous Aromatic Framework Electrodes for Efficient Electrochemical Uranium Extraction

Electrochemical uranium extraction from seawater provides a new opportunity for a sustainable supply of nuclear fuel. However, there is still room for studying flexible electrode materials in this field. Herein, we construct amidoxime group modified porous aromatic frameworks (PAF-144-AO) on flexible carbon cloths in situ using an easy to scale-up electropolymerization method followed by postdecoration to fabricate the self-standing, binder-free, metal-free electrodes (PAF-E). Based on the architectural design, adsorption sites (amidoxime groups) and catalytic sites (carbazole groups) are integrated into PAF-144-AO. Under the action of an alternating electric field, uranyl ions are selectively captured by PAN-E and subsequently transformed into Na2O(UO3·H2O)x precipitates in the presence of Na+ via reversible electron transfer, with an extraction capacity of 12.6 mg g-1 over 24 days from natural seawater. This adsorption-electrocatalysis mechanism is also demonstrated at the molecular level by ex situ spectroscopy. Our work offers an effective approach to designing flexible porous organic polymer electrodes, which hold great potential in the field of electrochemical uranium extraction from seawater.

Unveiling the Critical Role of Surface Hydroxyl Groups for Electro-Assisted Uranium Extraction from Wastewater

The electro-driven extraction of uranium from fluorine-containing uranium wastewater is anticipated to address the challenge of separating fluoro-uranium complexes in conventional technologies. Herein, we developed hydroxy-rich cobalt-based oxides (CoOx) for electro-assisted uranium extraction from fluorine-containing wastewater. Relying on theoretical calculations and other spectral measurements, the hydroxy-rich CoOx nanosheets can enhance the affinity for uranium due to the existence of a substantial quantity of hydroxyl groups. Accordingly, the CoOx nanosheets exhibit outstanding U(VI) removal efficiency in the presence of fluorine ions. Through the utilization of X-ray absorption fine structure (XAFS), we confirm that hydroxy-rich CoOx nanosheets capture free uranyl ions to form a sturdy 2Oax-1U-3Oeq configuration, which can be achieved through electro-driven fluorine-uranium separation. Notably, for the first time, the whole reaction process of uranium species on the CoOx surface from the initial uranium single atom growth to uranium oxide nanosheets is monitored by aberration-corrected transmission electron microscopes (AC-TEM). This work provides a paradigm for the advancement of novel functional materials as electrocatalysts for uranium extraction, as well as a new approach for studying the evolution mechanism of uranium species.

Efficient and sustainable extraction of uranium from aquatic solution using biowaste-derived active carbon

Efficient and cost-effective biosorbents derived from biowaste are highly demanding to handle various environmental challenges, and demonstrate the remarkable synergy between sustainability and innovation. In this study, the extraction of uranium U(VI) was investigated on biowaste activated carbon (BAC) obtained by chemical activation (phosphoric acid) using Albizia Lebbeck pods as biowaste. The biowaste powder (BP), biowaste charcoal (BC) and BAC were evaluated by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller (BET) with nitrogen adsorption for thermal properties, chemical structures, porosity and surface area, respectively. The pHPZC for acidic or basic nature of the surface and X-ray diffraction (XRD) analysis were performed for BAC. The morphological and elemental analysis were performed by scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). The extraction of uranium U(VI) ions from aqueous solutions using BAC as sorbent was investigated by using different variables such as pH, contact time, initial uranium U(VI) concentration and BAC dose. The highest adsorption (90.60% was achieved at 0.5 g BAC dose, 2 h contact time, pH 6, 10 ppm initial U(VI) concentration and with 200 rpm shaking speeds. The production of this efficient adsorbent from biowaste could be a potential step forward in adsorption of uranium to meet the high demand of uranium for nuclear energy applications.

Strengthening Fe(II)/Fe(III) Dynamic Cycling by Surface Sulfation to Achieve Efficient Electrochemical Uranium Extraction at Ultralow Cell Voltage

Electrochemically mediated Fe(II)/Fe(III) redox-coupled uranium extraction can efficiently reduce the cell voltage of electrochemical uranium extraction (EUE). How to regulate the surface structure to enhance the uranium acyl ion adsorption capacity and strengthen the Fe(II)/Fe(III) redox cycle process is crucial for EUE. In this work, we developed surface sulfated nanoreduced iron (S-NRI) for EUE and exhibited improved properties for EUE at an ultralow cell voltage (-0.1 V). Compared with a nanoreduced iron (NRI) adsorbent, S-NRI displayed faster electrochemical extraction kinetics properties and higher extraction efficiency and capacity for uranium. In a more complex seawater electrolyte containing uranyl ion concentration ranging from 1 to 20 ppm, the removal efficiency could reach almost ∼100% after EUE for 24 h. At a higher 50 ppm uranium acyl ion concentration in a seawater electrolyte, S-NRI exhibited higher extraction capacity (755.03 mg/g), which is better than 528.53 mg/g of NRI at a cell voltage of -0.1 V. Outstanding EUE property could be attributed to the fact that sulfate species (M-SO42-) on the S-NRI surface not only enhanced selective adsorption of uranyl ions but also strengthened the Fe(II)/Fe(III) redox cycle, which accelerated electron transfer between Fe(II) and U(VI), promoted the regeneration of Fe(II) active sites, and finally enhanced the EUE property.

Selective heterogeneous capture and release of actinides using carborane-functionalized electrodes

We report the heterogenization of molecular, electrochemically switchable ortho-substituted carboranes (^POCb, ^POCb-Pyr) for selective metal capture. Films of ^POCb and ^POCb-Pyr on glassy carbon and carbon fiber (CF) electrodes demonstrated heterogeneous electrochemical behaviour that was enhanced by the inclusion of single-walled carbon nanotubes (CNTs). Galvanostatically charged CF|CNT|^POCb and CF|CNT|^POCb-Pyr electrodes selectively captured and released actinides (Th⁴⁺, UO₂²⁺) from mixed solutions containing alkali (Cs⁺), lanthanide (Nd³⁺, Sm³⁺) and actinide (Th⁴⁺, UO₂²⁺) metal ions.

Efficient adsorption of low-concentration uranium from aqueous solutions

The development of nuclear energy has led to the depletion of uranium resources and now presents the challenge of treating radioactive wastewater. Extracting uranium from seawater and nuclear wastewater has been identified as an effective strategy for addressing these issues. However, extracting uranium from nuclear wastewater and seawater is still extremely challenging. In this study, an amidoxime-modified feather keratin aerogel (FK-AO aerogel) was prepared using feather keratin for efficient uranium adsorption. The FK-AO aerogel showed an impressive adsorption capacity of 585.88 mg·g^-1 in an 8 ppm uranium solution, with a calculated maximum adsorption capacity of 990.10 mg·g^-1. Notably, the FK-AO aerogel demonstrated excellent selectivity for U(VI) in simulated seawater that contained coexisting heavy metal ions. In a uranium solution having a salinity of 35 g·L^-1 and a concentration of 0.1-2 ppm, the FK-AO aerogel achieved a uranium removal rate of greater than 90 %, indicating its effectiveness in adsorbing uranium in environments having high salinity and low concentration. This suggests that FK-AO aerogel is an ideal adsorbent for extracting uranium from seawater and nuclear wastewater, and it is also expected that it could be used in industrial applications for extracting uranium from seawater.

Bi-Functional Co/Al Modified 1T-MoS2 /rGO Catalyst for Enhanced Uranium Extraction and Hydrogen Evolution Reaction in Seawater

Uranium is a key element in the preparation of nuclear fuel. An electrochemical uranium extraction technique is proposed to achieve high efficiency uranium extraction performance through HER catalyst. However, it is still a challenge to design and develop a high-performance hydrogen evolution reaction (HER) catalyst for rapid extraction and recovery of uranium from seawater. Herein, a bi-functional Co, Al modified 1T-MoS₂ /reduced graphene oxide (CA-1T-MoS₂ /rGO) catalyst, showing a good HER performance with a HER overpotential of 466 mV at 10 mA cm^-2 in simulated seawater, is first developed. Benefiting from the high HER performance of CA-1T-MoS₂ /rGO, efficient uranium extraction is achieved with a uranium extraction capacity of 1990 mg g^-1 in simulated seawater without post-treatment, exhibiting a good reusability. The results of experiments and density functional theory (DFT) show that a high uranium extraction and recovery capability is attributed to the synergy effect of the improved HER performance and the strong adsorption capacity between U and OH*. This work provides a new strategy for the design and preparation of bi-functional catalysts with high HER performance and uranium extraction and recovery capabilities in seawater.

Host-Guest Recognition Boosts Biomimetic Mono/Multivalent Cation Separation

Biomimetic ion permselective membranes with ultrahigh ion permeability and selectivity represent a research frontier in ion separation, yet the successful fabrication of such membranes remains a formidable challenge. Here, we demonstrate a 4-sulfocalix[4]arene (4-SCA)-modified graphene oxide (GO) membrane that shows extraordinary performance in separating mono-from multivalent cations, as well as having reversible pH-responsiveness. The resulting 4-SCA-modified GO (SCA-GO) membrane preferentially transports potassium ions (K⁺) over radionuclide cations (Co²⁺, UO₂²⁺, La³⁺, Eu³⁺, and Th⁴⁺). The ion selectivities are an order of magnitude higher than that of the unmodified GO membrane. Theoretical calculations and experimental investigations demonstrate that the much-improved ion selectivity arises from the specific recognition between 4-SCA and radionuclide cations. The transport of multivalent radionuclides is impeded by a binding-obstructing mechanism from the host-guest interactions. Interestingly, the host-guest interactions are responsive to the protonation/deprotonation transformation of the 4-SCA. Therefore, the SCA-GO membrane mimics pH-regulated ion selective behavior found in biological ion channels. Our strategy of designing a biomimetic permselective GO membrane may allow efficient nuclear wastewater treatment and, more importantly, deepen our understanding of biomimetic ion transport mechanisms.

Direct Separation of UO2 2+ by Coordination Sieve Effect via Spherical Coordination Traps

Molecule sieve effect (MSE) can enable direct separation of target, thus overcoming two major scientific and industrial separation problems in traditional separation, coadsorption, and desorption. Inspired by this, herein, the concept of coordination sieve effect (CSE) for direct separation of UO₂ ²⁺ , different from the previously established two-step separation method, adsorption plus desorption is reported. The used adsorbent, polyhedron-based hydrogen-bond framework (P-HOF-1), made from a metal-organic framework (MOF) precursor through a two-step postmodification approach, afforded high uptake capacity (close to theoretical value) towards monovalent Cs⁺ , divalent Sr²⁺ , trivalent Eu³⁺ , and tetravalent Th⁴⁺ ions, but completely excluded UO₂ ²⁺ ion, suggesting excellent CSE. Direct separation of UO₂ ²⁺ can be achieved from a mixed solution containing Cs⁺ , Sr²⁺ , Eu³⁺ , Th⁴⁺ , and UO₂ ²⁺ ions, giving >99.9% removal efficiency for Cs⁺ , Sr²⁺ , Eu³⁺ , and Th⁴⁺ ions, but <1.2% removal efficiency for UO₂ ²⁺ , affording benchmark reverse selectivity (S_M/U ) of >83 and direct generation of high purity UO₂ ²⁺ (>99.9%). The mechanism for such direct separation via CSE, as unveiled by both single crystal X-ray diffraction and density-functional theory (DFT) calculation, is due to the spherical coordination trap in P-HOF-1 that can exactly accommodate the spherical coordination ions of Cs⁺ , Sr²⁺ , Eu³⁺ , and Th⁴⁺ , but excludes the planar coordination UO₂ ²⁺ ion.

Porous Materials for Water Purification

Water pollution is a growing threat to humanity due to the pervasiveness of contaminants in water bodies. Significant efforts have been made to separate these hazardous components to purify polluted water through various methods. However, conventional remediation methods suffer from limitations such as low uptake capacity or selectivity, and current water quality standards cannot be met. Recently, advanced porous materials (APMs) have shown promise in improved segregation of contaminants compared to traditional porous materials in uptake capacity and selectivity. These materials feature merits of high surface area and versatile functionality, rendering them ideal platforms for the design of novel adsorbents. This Review summarizes the development and employment of APMs in a variety of water treatments accompanied by assessments of task-specific adsorption performance. Finally, we discuss our perspectives on future opportunities for APMs in water purification.

Intercalation of salicylaldoxime into layered double hydroxide: ultrafast and highly selective uptake of uranium from different water systems via versatile binding modes

We report the first example of MgAl layered double hydroxide intercalated with salicylaldoxime (SA-LDH) which exhibits excellent uranium (U(VI)) capture performance. In U(VI) aqueous solutions, the SA-LDH shows a tremendous maximum U(VI) sorption capacity (q_m^U) of 502 mg·g^-1, surpassing most known sorbents. For the aqueous solution with an initial U(VI) concentration (C₀^U) of ∼ 10 ppm, ≥99.99 % uptake is achieved in a wide pH range of 3-10. At C₀^U ∼ 20 ppm, >99 % uptake is reached within only 5 min, and pseudo-second-order kinetics rate constant (k₂) of 44.9 g·mg^-1·min^-1 reaches the record value, placing the SA-LDH amongst the fastest U adsorbing materials reported to date. In contaminated seawater with 35 ppm of U while highly concentrated metal ions of Na⁺, Mg²⁺, Ca²⁺, and K⁺, the SA-LDH still displays exceptionally high selectivity and ultrafast extraction for UO₂²⁺, giving >95 % uptake of U(VI) within 5 min, and the k₂ value of 0.308 g·mg^-1·min^-1 for seawater surpasses most reported values for aqueous solutions. Versatile binding modes toward U by SA-LDH, including complexation (UO₂²⁺ with SA^- and/or CO₃^2-), ion exchange and precipitation, contribute to the preferable uptake of U at different concentrations. X-ray absorption fine structure (XAFS) analyses demonstrate that one uranyl ion (UO₂²⁺) binds to two SA^- anions and two H₂O molecules forming 8-coordinated configuration. The U coordinates with O atom of the phenolic hydroxyl group and N atom of the -CN-O^- group of SA^-, forming a stable six-membered ring motif, which endows the fast and robust capture of U. The wonderful uranium trapping ability makes the SA-LDH among the best adsorbent used for uranium extraction from various solution systems including seawater.

Tuning excited state electronic structure and charge transport in covalent organic frameworks for enhanced photocatalytic performance

Covalent organic frameworks (COFs) represent an emerging class of organic photocatalysts. However, their complicated structures lead to indeterminacy about photocatalytic active sites and reaction mechanisms. Herein, we use reticular chemistry to construct a family of isoreticular crystalline hydrazide-based COF photocatalysts, with the optoelectronic properties and local pore characteristics of the COFs modulated using different linkers. The excited state electronic distribution and transport pathways in the COFs are probed using a host of experimental methods and theoretical calculations at a molecular level. One of our developed COFs (denoted as COF-4) exhibits a remarkable excited state electron utilization efficiency and charge transfer properties, achieving a record-high photocatalytic uranium extraction performance of ~6.84 mg/g/day in natural seawater among all techniques reported so far. This study brings a new understanding about the operation of COF-based photocatalysts, guiding the design of improved COF photocatalysts for many applications.

Tuning excited state electronic structure and charge transport in covalent organic frameworks for enhanced photocatalytic performance

Covalent organic frameworks (COFs) represent an emerging class of organic photocatalysts. However, their complicated structures lead to indeterminacy about photocatalytic active sites and reaction mechanisms. Herein, we use reticular chemistry to construct a family of isoreticular crystalline hydrazide-based COF photocatalysts, with the optoelectronic properties and local pore characteristics of the COFs modulated using different linkers. The excited state electronic distribution and transport pathways in the COFs are probed using a host of experimental methods and theoretical calculations at a molecular level. One of our developed COFs (denoted as COF-4) exhibits a remarkable excited state electron utilization efficiency and charge transfer properties, achieving a record-high photocatalytic uranium extraction performance of ~6.84 mg/g/day in natural seawater among all techniques reported so far. This study brings a new understanding about the operation of COF-based photocatalysts, guiding the design of improved COF photocatalysts for many applications.

Arrangement of Indocyanine Green in a 1.5-Nanometer Channel to Achieve High-Efficiency Imaging of the Intestinal Lymphatic System

The complications of inflammatory bowel diseases (IBDs) seriously endanger people’s health, such as bleeding, polyp hyperplasia, and even cancer. Although the precise pathophysiology of IBD is unknown, alterations in the intestinal lymphatic network, such as lymphangiogenesis and lymphatic vessel dysfunction, are well-established features. Therefore, the development of a reliable technology is urgently required, with a stereoscopic, deep, and high-resolution technology for IBD lymphatic targeting imaging in clinical practice. However, indocyanine green, the only clinically approved imaging agent by the Food and Drug Administration, can easily cause self-aggregation or be interfered with by microenvironments, causing fluorescence quenching, which seriously affects the imaging and detective capabilities. Herein, indocyanine green molecules are arranged in a 1.5-nanometer one-dimensional channel (TpPa-1@ICG). Based on this specified structure, the fluorescence enhancement effect is observed in the TpPa-1@ICG resultant, and the fluorescence intensity is enhanced by 27%. In addition, the ICG-incorporated porous solid reveals outstanding solvent (dichloromethane, tetrahydrofuran, etc.) and thermal (>300 °C) stability. After modifying the target molecules, TpPa-1@ICG showed excellent imaging ability for intestinal lymphatic vessels, providing a new imaging tool for IBDs research.

Intercalating negatively charged pillars into graphene oxide sheets to enhance sulfonamide pharmaceutical removal from water

Herein, novel composite materials were prepared by intercalating functional pillars, i.e., pentafluorobenzene (PFB) and sodium 2,3,4,5,6-pentafluorobenzoate (PFBS), into graphene oxide (GO) sheets. It led to forming size hives and increased availability of intrinsic area of GO. The synthesized materials (GO-PFB and GO-PFBS) were investigated as adsorbents to eliminate sulfadiazine (SD) from aqueous solutions. The adsorption capacities of GO-PFBS (1002.21 μmol/g) and GO-PFB (564.17 μmol/g) were 6.37 and 3.59 times higher than that of GO (157.21 μmol/g), respectively. The adsorption of SD onto GO-PFBS decreased with increasing solution pH. Density functional theory (DFT) results revealed that the SD adsorption onto the adsorbents was exothermic, and the introduction of the carboxylate groups showed lower binding energy. It was found that hydrophobic interaction fully participates in the adsorption process, and the electrostatic complementation of hydrogen bonding further enhances the SD adsorption. Obtained results showed that intercalating functional rigid molecules as pillars to support GO sheets could improve its adsorption behavior.

Co-construction of molecular-level uranyl-specific "nano-holes" with amidoxime and amino groups on natural bamboo strips for specifically capturing uranium from seawater

Efficiently capturing of uranium (VI) [U(VI)] from seawater elicits unparalleled attraction for sustaining the uplifted requirement for nuclear fuel. However, obtaining the abundant U(VI) resource from seawater has always seriously restricted by competitive adsorption from higher concentrations of competitors, especially vanadium (V) [V(V)]. Herein, based on amidoximized natural bamboo strips with hierarchical porous structure, the molecular-level uranyl-specific "nano-holes" was co-constructed by the intramolecular hydrogen bonds for specifically trapping U(VI) from seawater. Manipulating the branched degrees of amino groups enabled the creation of a series of the molecular-level uranyl-specific "nano-holes" that exhibit ultrahigh affinity and selective adsorption of U(VI) with a adsorption capacity 1.8 fold higher compared to that of V(V) after 30 days floating in the Yellow Sea basin, conquering the long-term challenge of the competitive adsorption of V(V) for amidoxime-based adsorbents applied to extract U(VI) from seawater. The diameter of the molecular-level uranyl-specific "nano-holes" is approximately 12.07 Å, significantly larger than (UO₂)₃(OH)₃⁺ (10.37 Å) and smaller than HV₁₀O₂₈^5-, thereby exhibiting specifically trapping of U(VI) in a series of adsorption experiments with different U(VI)-V(V) ratios. Besides, the adsorption model based on the combination of experimental and theoretical results is accompanied by "hydrogen bond breaking and coordination bond formation".

Encapsulating Amidoximated Nanofibrous Aerogels within Wood Cell Tracheids for Efficient Cascading Adsorption of Uranium Ions

Continuous filtering adsorption has drawn growing interest in the exploration of uranium resources in seawater and reduction in the environmental risks of uraniferous wastewater from nuclear industries. For most filtering adsorbents, repeated filtration, high membrane thickness, and high pressure are normally essential to achieve both a high rejection ratio and high filtration flux. Herein cellulose fibrils were preferentially exfoliated from the lignin-poor layer of secondary cell walls of balsa wood during an in situ amidoximation process. By maintaining honeycomb-like cellular microstructures and cellulose aerogel stuffing in their cell tracheids, the resultant nanowoods showed superior mechanical properties (e.g., compressive strength ∼1.3 MPa in transverse direction) with large surface areas (∼80 m² g^-1). When their cell tracheids were aligned perpendicular to the flow and the edges sealed with a thermoset polymer, they could serve as efficient and high-pressure filtration membranes to capture aquatic uranium ions. In analogy to a typical cascading filtration system, the filtrate passed successively the layered-organized cell tracheids through abundant micropores on their cell walls, enabling a high rejection ratio of >99% and flux of ∼920 L m^-2 h^-1 under pressure up to 6 bar (membrane thickness of 2 mm). Thus, this study not only provides an in situ approach to producing robust woods with functional nanocellulose encapsulated into their cell tracheids but also offers a sustainable route for high-efficiency extraction of aqueous uranium.

High-strength and anti-biofouling nanofiber membranes for enhanced uranium recovery from seawater and wastewater

Ultrathin fibers can increase the contact area between adsorbents and seawater during the uranium extraction process; however, their construction usually aggravates the complex spinning technology and lowers their mechanical strength. Meanwhile, high strength and antifouling ability are essential for ocean adsorbents to withstand the complex natural environment and microbial systems. Herein, we design high-strength and anti-biofouling poly(amidoxime) nanofiber membranes (HA-PAO NFMs) via a supramolecular crosslinking. Bacterial cellulose supplies the NFMs with ultrathin fiber structure, and large amounts of adsorption ligands are immobilized on the framework via the crosslinking with antibacterial ions. Thus, different from other fibers, HA-PAO NFMs achieve ultrathin diameter (20-30 nm), high BET area (51 m² g^-1), and excellent mechanical strength (13.6 MPa). The uranium adsorption capacity reaches to 409 mg-U/g-Ads in the simulated seawater, 99.2% uranium can be removed from the U-contained wastewater, and the adsorption process can be observed by the naked eye due to the significant color changes. The inhibition zones indicate their excellent anti-biofouling ability, which contributes to 1.83 times more uranium extraction amount from natural seawater than the non-antifouling adsorbents. Furthermore, they display a long service life and can be large-scale prepared, and the HA-PAO NFMs have potential in the massive uranium recovery.

Integration of quantum dots with Zn2GeO4 nanoellipsoids to expand the dynamic detection range of uranyl ions in fluorescent test strips

Fluorescent colorimetric test strips normally have a narrow dynamic detection-range due to the limited responsive range from single responsive materials, which cannot meet the wide detection requirement in practical applications. Herein, we developed an approach to detect uranyl ions (UO₂²⁺) with a broad detection range using the synthesized ZnS:Mn quantum dots (QDs) modified Zn₂GeO₄ nanoellipsoids (Zn₂GeO₄ @ZnS:Mn NEs), containing two responsive materials with the opposite signal responses at different UO₂²⁺ concentrations. Specifically, a red to chocolate color change was observed at low analyte concentrations (0.01-100 μM) resulting from the photoinduced electron transfer effect from ZnS:Mn QDs to UO₂²⁺. A sequentially olive drab to green color change has been observed when further increasing the UO₂²⁺ concentration (100-1000 μM) as a result of the antenna effect between Zn₂GeO₄ nanoellipsoids and UO₂²⁺. In addition, a low-cost and portable fluorescent test strip has been further fabricated through embedding Zn₂GeO₄ @ZnS:Mn NEs on a microporous structure membrane, demonstrating a facile yet effective colorimetric response to UO₂²⁺ in lab water, lake water, and seawater with a wide dynamic range. Therefore, it is potentially attractive for real-time and on-site detection of UO₂²⁺ in sudden-onset situations.

Biofibrous nanomaterials for extracting strategic metal ions from water

Strategic metals play an indispensable role in the related industries. Their extraction and recovery from water are of great significance due to both their rapid consumption and environmental concern. Biofibrous nanomaterials have shown great advantages in capturing metal ions from water. Recent progress in extraction of typical strategic metal ions such as noble metal ions, nuclear metal ions, and Li-battery related metal ions is reviewed here using typical biological nanofibrils like cellulose nanofibrils, chitin nanofibrils, and protein nanofibrils, as well as their assembly forms like fibers, aerogels/hydrogels, and membranes. An overview of advances in material design and preparation, extraction mechanism, dynamics/thermodynamics, and performance improvement in the last decade is provided. And at last, we propose the current challenges and future perspectives for promoting biological nanofibrous materials toward extracting strategic metal ions in practical conditions of natural seawater, brine, and wastewater.

Highly Efficient Electrocatalytic Uranium Extraction from Seawater over an Amidoxime-Functionalized In-N-C Catalyst

Seawater contains uranium at a concentration of ≈3.3 ppb, thus representing a rich and sustainable nuclear fuel source. Herein, an adsorption-electrocatalytic platform is developed for uranium extraction from seawater, comprising atomically dispersed indium anchored on hollow nitrogen-doped carbon capsules functionalized with flexible amidoxime moieties (In-N_x -C-R, where R denotes amidoxime groups). In-N_x -C-R exhibits excellent uranyl capture properties, enabling a uranium removal rate of 6.35 mg g^-1 in 24 h, representing one of the best uranium extractants reported to date. Importantly, In-N_x -C-R demonstrates exceptional selectivity for uranium extraction relative to vanadium in seawater (8.75 times more selective for the former). X-ray absorption spectroscopy (XAS) reveals that the amidoxime groups serve as uranyl chelating sites, thus allowing selective adsorption over other ions. XAS and in situ Raman results directly indicate that the absorbed uranyl can be electrocatalytically reduced to an unstable U(V) intermediate, then re-oxidizes to U(VI) in the form of insoluble Na₂ O(UO₃ ·H₂ O)_x for collection, through reversible single electron transfer processes involving InN_x sites. These results provide detailed mechanistic understanding of the uranium extraction process at a molecular level. This work provides a roadmap for the adsorption-electrocatalytic extraction of uranium from seawater, adding to the growing suite of technologies for harvesting valuable metals from the earth's oceans.

Facile synthesis of low-cost MnPO4 with hollow grape-like clusters for rapid removal uranium from wastewater

In order to deal with the environmental resource problems caused by nuclear pollution and uranium mine wastewater, it is particularly important to develop uranium removal adsorbent materials with low cost, high efficiency and controllable rapid preparation. In this work, the hollow grape-like manganese phosphate clusters (h-MnPO₄) were synthesized in 4 h by in-situ etching without template at room temperature, which can quickly and effectively remove uranium ions from wastewater. Due to the reasonable hollow structure, more effective adsorption sites are exposed. The obtained sample h-MnPO₄-200 reaches adsorption equilibrium in 1 h and can remove 97.20% uranyl ions (initial concentration is 100 mg L^-1). Under the condition of 25 ℃ and pH= 4, the maximum adsorption capacity of h-MnPO₄-200 for uranium was 751.88 mg g^-1. The FT-IR, XPS and XRD analysis showed that -OH and PO₄^3- groups played a key role in the adsorption process. Thanks to the synergistic adsorption mechanism of surface complexation and dissolution-precipitation, h-MnPO₄-200 maintained a high removal rate in the presence of competitive anions and cations. In a word, h-MnPO₄-200 can be rapidly synthesized through a facile and low-cost method and has a great application prospect in the practical emergency treatment of uranium-containing wastewater.

Easily synthesized mesoporous aluminum phosphate for the enhanced adsorption performance of U(VI) from aqueous solution

High-yield selective adsorbents and suitable modification methods are both significant for the efficient treatment of U-contaminated wastewater. In this work, a rich-mesoporous aluminum phosphate adsorbent (APO-10) was synthesized by simply increasing the mass of reactants under a fixed solvent volume. After increasing the mass of reactants ten times, APO-10 has the added defect level, the increased specific surface area, and mesoporous structure, and the increased number and enhanced adsorption ability of adsorption active sites (phosphorus-oxygen groups) on the surface, resulting in an enhanced adsorption performance of U(VI) in various environmental conditions. Its ultrahigh adsorption capacity calculated by the Langmuir model can reach 826.44 mg g^-1 at pH = 5.5 and T = 298 K. Its crystal structure did not change after adsorption and remained at 584.40 mg g^-1 after 6 cycles. Additionally, APO-10 shows an excellent uranium-selectivity over 68% from a mixed aqueous solution and has excellent applicability in the acidic and alkaline environment based on dynamic adsorption and desorption column experiments. This study not only provides a high-yield efficient selective adsorbent (APO-10) with excellent anti-radiation structure stability for the treatment of radioactive contamination but also provides a feasible modification method by simply increasing the mass of reactants.