Surface and Bulk Effects in Photochemical Reactions and Photomechanical Effects in Dynamic Molecular Crystals

Photodimerization-Triggered Photopolymerization of Triene Coordination Polymers Enables Macroscopic Photomechanical Movements

Controlling the packing of olefinic molecules in crystals is essential for triggering solid-state [2 + 2] photocycloaddition reactions and the synthesis of photocontrolled smart materials. Herein, we report the stepwise photodimerization-triggered photopolymerization of two triene coordination polymers (CPs), {[Zn(2-BBA)2(tpeb)]·0.5CH3CN}n (1, 2-HBBA = 2-bromobenzoic acid, tpeb = 1,3,5-tri-4-pyridyl-1,2-ethenylbenzene) and {[Zn(3-BBA)2(tpeb)]·CH3CN)}n (2, 3-HBBA = 3-bromobenzoic acid). Upon irradiation with 420 nm light, each pair of closely packed and parallel olefinic bonds in 1 undergoes a [2 + 2] cycloaddition reaction, which connects two adjacent Z-shaped chains into a ladder-like coordination chain [Zn(2-BBA)2(bpbdpvpcb)0.5]n (1a, bpbdpvpcb = 1,3-bis(4-pyridyl)-2,4-bis(3,5-di(2-(4-pyridyl)vinyl)phenyl]cyclobutene) through single-crystal to single-crystal (SCSC) transformation. After photodimerization from 1 to 1a has occurred, the olefinic bonds that were initially distant are brought in close enough proximity to meet the requirements for a subsequent [2 + 2] cycloaddition reaction. Upon further light irradiation, the neighboring bpbdpvpcb ligands in 1a experience a SCSC photopolymerization based on [2 + 2] photocycloaddition and transform into poly-3b,4,5,5a,8b,9,10a-octahydro-4,5,9,10-tetrapyridyl-2,7-di(2-(4-pyridyl)vinyl)dicyclobuta[e,l]-pyren (poly-otpdpvdcbp). 2 showed similar structural changes under UV light illumination. Under light exposure, single crystals of 1 and 2 with different morphologies exhibit bending, cracking, and jumping photomechanical motions. The composite film (1-PVA) engineered by dispersing crystalline particles of 1 in poly(vinyl alcohol) (PVA) displays interesting light-wavelength-dependent photomechanical motions and can perform photodriven swimming on a liquid surface. This work provides a useful and promising approach to enable photodimerization of those photoinactive olefin pairs embedded in CPs and opens a new route to synthesize organic polymers by using olefinic CP platforms.

Crystal Engineering-Driven Sunlight Responsiveness and Flexible Waveguide Transmission

Here, a barbituric acid derivative containing pyrene rings (DPPT) was successfully synthesized, and two types of crystals were prepared by using crystal engineering methods. Orange sheet-like crystals (DPPT-O, observed in visible light), prepared in a DCM/CH3OH solution, exhibited brittleness and weak fluorescence emission, along with sunlight-induced bending and fracturing. Red needle-like crystals (DPPT-R, also observed in visible light), synthesized in a DCM/CH3CN solution, demonstrated elastic properties, strong fluorescence emission, and excellent optical waveguide performance (with an optical loss coefficient of 0.23-0.30 dB mm-1). Single-crystal data analysis revealed that the stacking arrangement of molecules critically influenced the elasticity of the crystals, while the reaction cavity size regulated the photomechanical properties of the crystals. This study achieved effective control over sunlight responsiveness and flexible optical waveguide transmission for the first time, providing innovative insights for the application of homogeneous organic polycrystalline molecular crystals in this field.

The Use of Photocycloaddition Reactions to Drive Mechanical Motions Resembling Humanoid Movements

With the aim of producing a photomechanical material for incorporation in soft microrobots, a one-dimensional diene coordination polymer (CP) [Cd(F-bpeb)(3-CBA)2]n (CP1, F-bpeb=4,4'-((1E,1'E)-(2,5-difluoro-1,4-phenylene)bis(ethene-2,1-diyl))dipyridine, 3-HCBA=3-chlorobenzoic acid) was synthesized and characterized. Irradiation of CP1 with ultraviolet (UV) or visible light causes [2+2] photocycloaddition reactions resulting in the introduction of crystal strain which triggers various types of crystal movements. Composite films of CP1-PVA (SC) fabricated by dispersing CP1 crystals into polyvinyl alcohol (PVA) solution allow amplification of the crystal movement so that the film strips exhibit fast and flexible curling upon photoirradiation. The composite films may be cut into long rectangular strips and folded to simulate soft microrobots which exhibit a variety of fast, flexible and continuous photomechanical movements resembling a human performing various gymnastic exercises.

Strategies to Diversification of the Mechanical Properties of Organic Crystals

Structurally ordered soft materials that respond to complementary stimuli are susceptible to control over their spatial and temporal morphostructural configurations by intersectional or combined effects such as gating, feedback, shape-memory, or programming. In the absence of general and robust design and prediction strategies for their mechanical properties, at present, combined chemical and crystal engineering approaches could provide useful guidelines to identify effectors that determine both the magnitude and time of their response. Here, we capitalize on the purported ability of soft intermolecular interactions to instigate mechanical compliance by using halogenation to elicit both mechanical and photochemical activity of organic crystals. Starting from (E)-1,4-diphenylbut-2-ene-1,4-dione, whose crystals are brittle and photoinert, we use double and quadruple halogenation to introduce halogen-bonded planes that become interfaces for molecular gliding, rendering the material mechanically and photochemically plastic. Fluorination diversifies the mechanical effects further, and crystals of the tetrafluoro derivative are not only elastic but also motile, displaying the rare photosalient effect.

Highly efficient in crystallo energy transduction of light to work

Various mechanical effects have been reported with molecular materials, yet organic crystals capable of multiple dynamic effects are rare, and at present, their performance is worse than some of the common actuators. Here, we report a confluence of different mechanical effects across three polymorphs of an organic crystal that can efficiently convert light into work. Upon photodimerization, acicular crystals of polymorph I display output work densities of about 0.06-3.94 kJ m-3, comparable to ceramic piezoelectric actuators. Prismatic crystals of the same form exhibit very high work densities of about 1.5-28.5 kJ m-3, values that are comparable to thermal actuators. Moreover, while crystals of polymorph II roll under the same conditions, crystals of polymorph III are not photochemically reactive; however, they are mechanically flexible. The results demonstrate that multiple and possibly combined mechanical effects can be anticipated even for a simple organic crystal.

Single-Crystal-to-Single-Crystal Photosynthesis of Supramolecular Organoboron Polymers with Dynamic Effects

The solid-state synthesis of single-crystalline organic polymers, having functional properties, remains an attractive and developing research area in polymer chemistry and materials science. However, light-triggered topochemical synthesis of crystalline polymers comprising an organoboron backbone has not yet been reported. Here, we describe an intriguing example of single-crystal-to-single-crystal (SCSC) rapid photosynthesis (occurs on a seconds-scale) of two structurally different linear organoboron polymers, driven by environmentally sustainable visible/sun light, obtained from the same monomer molecule. A newly designed Lewis acid-base type molecular B ← N organoboron adduct (consisting of an organoboron core and naphthylvinylpyridine ligands) crystallizes in two solid-state forms featuring the same chemical structure but different 3D structural topologies, namely, monomers 1 and 2. The solvate molecule-free crystals of 1 undergo topochemical photopolymerization via an unusual olefin-naphthyl ring [2 + 2] cyclization to yield the single crystalline [3]-ladderane polymer 1P growing along the B ← N linkages, accompanied by instantaneous and violent macroscopic mechanical motions or photosalient effects (such as bending-reshaping and jumping motions). In contrast, visible light-harvesting single crystals of 2 quantitatively polymerize to a B ← N bond-stabilized polymer 2P in a SCSC fashion owing to the rapid [2 + 2] cycloaddition reaction among olefin double bonds. Such olefin bonds in the crystals of 2 are suitably preorganized for photoreaction due to the presence of solvate molecules in the crystal packing. Single crystals of 2 also show photodynamic jumping motions - in response to visible light but in a relatively slower fashion than the crystals of 1. In addition to SCSC topochemical polymerization and dynamic motions, both monomer crystals and their single-crystalline polymers feature green emissive and short-lived room-temperature phosphorescence properties upon excitation with visible-light wavelength.

Remarkable Off-On Tunable Solid-State Luminescence by the Regulation of Pyrene Dimer

It is always a challenge to achieve "off-on" luminescent switch by regulating non-covalent interactions. Herein, we report a unique strategy for constructing high performance "off-on" tunable luminescent materials utilizing a novel molecule (TFPA) consist of pyrene and cyanostilbene. The pristine crystal of TFPA is almost non-emissive. Upon grinding/UV irradiation, an obvious luminescence enhancement is observed. Theoretical and experimental results revealed the underlying mechanism of this intriguing "off-on" switching behavior. The non-emissive crystal consists of ordered H-aggregates, with adjacent two molecules stacked in an anti-parallel manner and no overlapped area in pyrene moieties. When external force is applied by grinding or internal force is introduced through the photoisomerization, the dimer structures are facilitated with shorter intermolecular distances and better overlapping of pyrene moieties. In addition, the "on" state can recover to "off" state under thermal annealing, showing good reversibility and applicability in intelligence material. The present results promote an in-depth insight between packing structure and photophysical property, and offer an effective strategy for the construction of luminescence "off-on" switching materials, toward the development of stimuli-responsive luminescent materials for anti-counterfeiting.

Mechanical Effects of Elastic Crystals Driven by Natural Sunlight and Force

Flexible crystals that can capture solar energy and convert it into mechanical energy are promising for a wide range of applications such as information storage and actuators, but obtaining them remains a challenge. Herein, an elastic crystal of a barbiturate derivative was found to be an excellent candidate, demonstrating plastic bending behavior under natural sunlight irradiation. 1 H NMR and high-resolution mass spectrum data of microcrystals before and after light irradiation demonstrated that light-induced [2+2] cycloaddition was the driving force for the photomechanical effects. Interestingly, the crystals retained elastic bending even after light irradiation. This is the first report of flexible crystals that can be driven by natural sunlight and that have both photomechanical properties and elasticity. Furthermore, regulation of the passive light output direction of the crystals and transport of objects by applying mechanical forces and light was demonstrated.

Photo-actuators via epitaxial growth of microcrystal arrays in polymer membranes

Photomechanical crystals composed of three-dimensionally ordered and densely packed photochromes hold promise for high-performance photochemical actuators. However, bulk crystals with high structural ordering are severely limited in their flexibility, resulting in poor processibility and a tendency to fragment upon light exposure, while previous nano- or microcrystalline composites have lacked global alignment. Here we demonstrate a photon-fuelled macroscopic actuator consisting of diarylethene microcrystals in a polyethylene terephthalate host matrix. These microcrystals survive large deformations and show a high degree of three-dimensional ordering dictated by the anisotropic polyethylene terephthalate, which critically also has a similar stiffness. Overall, these ordered and compliant composites exhibit rapid response times, sustain a performance of over at least hundreds of cycles and generate work densities exceeding those of single crystals. Our composites represent the state-of-the-art for photochemical actuators and enable properties unattainable by single crystals, such as controllable, reversible and abrupt jumping (photosalient behaviour).

The Factor beyond Schmidt's Criteria Impacting the Photo-Induced [2+2] Cycloaddition Reactivity and Photoactuation of Molecular Crystals Based on Cyclic Chalcone Analogues

Generally, the potential reactive "olefin pairs" in the molecular crystals satisfying Schmidt's criteria could undergo topological [2+2] cycloaddition. In this study, another factor that affects the photodimerization reactivity of chalcone analogues was found. The cyclic chalcone analogues of (E)-2-(2,4-dichlorobenzylidene)-2,3-dihydro-1H-inden-1-one (BIO), (E)-2-(naphthalen-2-ylmethylene)-2,3-dihydro-1H-inden-1-one (NIO), (Z)-2-(2,4-dichlorobenzylidene)benzofuran-3(2H)-one (BFO), and (Z)-2-(2,4-dichlorobenzylidene)benzo[b]thiophen-3(2H)-one (BTO) have been synthesized. While the geometrical parameters for the molecular packing of the above four compounds did not exceed Schmidt's criteria, [2+2] cycloaddition did not occur in the crystals of BIO and BTO. The single crystal structures and Hirshfeld surface analyses revealed that interactions of C=O⋅⋅⋅H (CH2 ) existed between adjacent molecules in the crystal of BIO. Therefore, the carbonyl and methylene groups linked with one carbon atom in carbon-carbon double bond were tightly confined in the lattice, acting as a tweezer to inhibit free movement of the double bond and suppressing [2+2] cycloaddition. In the crystal of BTO, similar interactions of Cl⋅⋅⋅S and C=O⋅⋅⋅H (C6 H4 ) prevented free movement of the double bond. In contrast, the intermolecular interaction of C=O⋅⋅⋅H only exists around the carbonyl group in the crystals of BFO and NIO, leaving the C=C double bonds to move freely and allowing the occurrence of [2+2] cycloaddition. Driven by photodimerization, the needle-like crystals of BFO and NIO displayed evident photo-induced bending behavior. This work demonstrates that the intermolecular interactions around carbon-carbon double bond affect the [2+2] cycloaddition reactivity except for Schmidt's criteria. These findings provide valuable insights into the design of photomechanical molecular crystalline materials.

Organic Crystal Packing Is Key to Determining the Photomechanical Response

Organic photomechanical crystals have great promise as molecular machines, but their development has been hindered by a lack of clear theoretical design principles. While much research has focused on the choice of the molecular photochrome, density functional theory calculations here demonstrate that crystal packing has a major impact on the work densities that can be produced by a photochrome. Examination of two diarylethene molecules reveals that the predicted work densities can vary by an order of magnitude across different experimentally known crystal structures of the same species. The highest work densities occur when molecules are aligned in parallel, thereby producing a highly anisotropic photomechanical response. These results suggest that a greater emphasis on polymorph screening and/or crystal engineering could improve the work densities achieved by photomechanical engines. Finally, an inherent thermodynamic asymmetry is identified that biases photomechanical engines to exhibit higher work densities in the forward stroke direction.

Collective photothermal bending of flexible organic crystals modified with MXene-polymer multilayers as optical waveguide arrays

The performance of any engineering material is naturally limited by its structure, and while each material suffers from one or multiple shortcomings when considered for a particular application, these can be potentially circumvented by hybridization with other materials. By combining organic crystals with MXenes as thermal absorbers and charged polymers as adhesive counter-ionic components, we propose a simple access to flexible hybrid organic crystal materials that have the ability to mechanically respond to infrared light. The ensuing hybrid organic crystals are durable, respond fast, and can be cycled between straight and deformed state repeatedly without fatigue. The point of flexure and the curvature of the crystals can be precisely controlled by modulating the position, duration, and power of thermal excitation, and this control can be extended from individual hybrid crystals to motion of ordered two-dimensional arrays of such crystals. We also demonstrate that excitation can be achieved over very long distances (>3 m). The ability to control the shape with infrared light adds to the versatility in the anticipated applications of organic crystals, most immediately in their application as thermally controllable flexible optical waveguides for signal transmission in flexible organic electronics.

Molecular Twisting Affects the Solid-State Photochemical Reactions of Unsaturated Ketones and the Photomechanical Effects of Molecular Crystals

Three groups of chalcone derivatives and their analogues involving halogen atoms (X=F, Cl, Br) have been synthesized. Firstly, the nearly planar acyclic chalcone derivatives were inclined to undergo photo-induced stereospecific [2+2] cycloaddition, which triggered the crystals to exhibit macroscopic motions of bending or cracking. In particular, the single-crystal-to-single-crystal transformation happened upon UV irradiation of the crystals, which was helpful for the understanding photomechanical effects. Cyclic 3,4-dihydronaphthalene-based chalcone analogues possess a more twisted conformation, and they tend to undergo trans-cis isomerization. No photomechanical effect was observed for the crystals of the cyclic chalcone analogues due to the lower isomerization rate. The twist degree of chroman-based molecules was in between of the first two, [2+2] cycloaddition and trans-cis isomerization simultaneously took place in crystals. Photo-induced bending and twisting were observed for the crystals of chroman-based chalcone analogues. Therefore, the differences in molecular dihedral angles in α,β-unsaturated ketones were responsible for their photochemical characters and in turn to tune the photomechanical effects. In this work, a bridge between the molecular structures and solid-state photochemical reactions triggered photomechanical crystals is built.

Polymorphs with Remarkably Distinct Physical and/or Chemical Properties

Polymorphism in crystals is known since 1822 and the credit goes to Mitscherlich who realized the existence of different crystal structures of the same compound while working with some arsenate and phosphate salts. Later on, this phenomenon was observed also in organic crystals. With the advent of different technologies, especially the easy availability of single crystal XRD instruments, polymorphism in crystals has become a common phenomenon. Almost 37 % of compounds (single component) are polymorphic to date. As the energies of the different polymorphic forms are very close to each other, small changes in crystallization conditions might lead to different polymorphic structures. As a result, sometimes it is difficult to control polymorphism. For this reason, it is considered to be a nuisance to crystal engineering. It has been realized that the property of a material depends not only on the molecular structure but also on its crystal structure. Therefore, it is not only of interest to academia but also has widespread applications in the materials science as well as pharmaceutical industries. In this review, we have discussed polymorphism which causes significant changes in materials properties in different fields of solid-state science, such as electrical, magnetic, SHG, thermal expansion, mechanical, luminescence, color, and pharmaceutical. Therefore, this review will interest researchers from supramolecular chemistry, materials science as well as medicinal chemistry.

Edge-to-Center Propagation of Photochemical Reaction during Single-Crystal-to-Single-Crystal Photomechanical Transformation of 2,5-Distyrylpyrazine Crystals

Photomechanical molecular crystals are promising materials for photon-powered artificial actuators. To interpret the photomechanical responses, the spatiotemporal distribution of photoproducts in crystals could be an important role in addition to molecular structures, molecular packings, illumination conditions, crystal morphology, crystal size, and so on. In this study, we have found that single crystals of 2,5-distyrylpyrazine show a smooth single-crystal-to-single-crystal photomechanical expansion, and the photochemical reaction propagates from the edge to the center of the single crystal. We revealed that the surface effect (special reactivity at the crystal surface) in addition to the cooperative effect (the reaction is facilitated by neighboring molecules) is essential for the edge-to-center propagation of the photochemical reaction. Our results would provide a foundation for future studies of the photochemical reaction dynamics in photomechanical molecular crystals.

Photomechanical Motions in Organoboron-Based Phosphorescent Molecular Crystals Driven by a Crystal-State [2 + 2] Cycloaddition Reaction

Photoluminescent molecular crystals integrated with the ability to transform light energy into macroscopic mechanical motions are a promising choice of materials for both actuating and photonic devices. However, such dynamic photomechanical effects, based on molecular organoboron compounds as well as phosphorescent crystalline materials, are not yet known. Here we present an intriguing example of photomechanical molecular single crystals of a newly synthesized organoboron containing Lewis acid-base molecular adduct (BN1, substituted triphenylboroxine and 1,2-di(4-pyridyl)ethylene) having a capsule shape molecular geometry. The single crystals of BN1 under UV light exhibit controllable rapid bending-shape recovery, delamination, violent splitting-jumping, and expanding features. The detailed structural investigation by single-crystal X-ray diffraction and ¹H NMR spectroscopy reveals that the photosalient behavior of the BN1 single crystals is driven by a crystal-to-crystal [2 + 2] cycloaddition reaction, supported by four donor-acceptor type B←N bonds. The instant photomechanical reaction in the BN1 crystals occurs under UV on account of sudden release of stress associated with the strained molecular geometry, significant solid-state molecular movements (supramolecular change), and cleavage of half intermolecular B←N linkages to result in a complete photodimerized single-crystalline product via the existence of two other intermediate photoproducts. In addition, the BN1 crystals display short-lived room temperature phosphorescence, and the photodynamic events are accompanied by the enhancement of their phosphorescence intensity to yield the photoproduct. Interestingly, the molecular crystals of the final photoproduct polymerize at ambient conditions when recrystallized from the solution forming a 2D supramolecular crystalline polymer stabilized by the retention of all B←N coordination modes.

Controllable photomechanical bending of metal-organic rotaxane crystals facilitated by regioselective confined-space photodimerization

Molecular machines based on mechanically-interlocked molecules (MIMs) such as (pseudo) rotaxanes or catenates are known for their molecular-level dynamics, but promoting macro-mechanical response of these molecular machines or related materials is still challenging. Herein, by employing macrocyclic cucurbit[8]uril (CB[8])-based pseudorotaxane with a pair of styrene-derived photoactive guest molecules as linking structs of uranyl node, we describe a metal-organic rotaxane compound, U-CB[8]-MPyVB, that is capable of delivering controllable macroscopic mechanical responses. Under light irradiation, the ladder-shape structural unit of metal-organic rotaxane chain in U-CB[8]-MPyVB undergoes a regioselective solid-state [2 + 2] photodimerization, and facilitates a photo-triggered single-crystal-to-single-crystal (SCSC) transformation, which even induces macroscopic photomechanical bending of individual rod-like bulk crystals. The fabrication of rotaxane-based crystalline materials with both photoresponsive microscopic and macroscopic dynamic behaviors in solid state can be promising photoactuator devices, and will have implications in emerging fields such as optomechanical microdevices and smart microrobotics.

Tunable photosalient behaviours within coordination polymers via functional molecular prearrangements

Four Cd(II)/diene coordination polymers (CPs) with similar 1D chain motifs exhibit different photosalient (PS) behaviours in response to UV light. The [2+2] photoreaction between the CC groups within these CPs results in diverse PS behaviours of their crystals with different CC pair arrangements. The interesting PS behaviours of these CPs can be applied in design and fabrication of advanced photoactuating materials.

Photomechanical effect in Zn(ii) and Cd(ii) 1D coordination polymers: photosalient to non-salient behaviour

Two Zn(ii)/Cd(ii) 1D coordination polymers undergo [2+2] photodimerization, wherein Zn-CP shows mechanical motion and generates a free cyclobutane ligand, while Cd-CP does not.

Fast and reversible bidirectional photomechanical response displayed by a flexible polycrystalline aggregate of a hydrazone

In this study, a typical laboratory experiment was carried out to isolate the flat strips of a flexible polycrystalline aggregate of a hydrazone derivative.

Recent Development of Photodeformable Crystals: From Materials to Mechanisms

Photodeformable materials are a class of molecules that can convert photon energy into mechanical energy, which have attracted tremendous attention in the last few decades. Owing to their unique photoinduced deformable properties, including fast light-response and diverse mechanical behaviors, photodeformable materials have exhibited great potential in many practical applications such as actuators, photoswitches, artificial muscles, and bioimaging. In this review, we sort out the current state of photodeformable crystals and classify them into six categories by molecular structures: diarylethenes, azobenzenes, anthracenes, olefins, triarylethylenes, and other systems. Three distinct light-responsive mechanisms, photocyclization, trans-cis isomerization, and photodimerization, are revealed to play significant roles in the molecular photodeformation. Their corresponding photodeformable behaviors such as twisting, bending, hopping, bursting, and curling, as well as the potential applications, are also discussed. Furthermore, the challenges and prospective development directions of photodeformable crystals are highlighted.

Mechanical Motion in Crystals Triggered by Solid State Photochemical [2+2] Cycloaddition Reaction

Some special crystals respond to light by jumping, scattering or bursting just like popping of popcorn kernels on a hot surface. This rare phenomenon is called the photosalient (PS) effect. Molecular level control over the arrangement of light-responsive molecules in microscopic crystals for macroscale deformation or mechanical motion offers the possibility of using light to control smart material structures across the length scales. Photochemical [2+2] cycloaddition has recently emerged as a promising route to obtain photoswitchable structures and a wide variety of frameworks, but such reaction in crystals leading to macroscopic mechanical motion is relatively less explored. Study of chemistry of such novel soft crystals for the generation of smart materials is an imperative task. This minireview highlights recent advances in solid-state [2+2] cycloaddition in crystals to induce macroscale mechanical motion and thereby transduction of light into kinetic energy.

(9-Isocyanoanthracene)gold(I) Complexes Exhibiting Two Modes of Crystal Jumps by Different Structure Change Mechanisms

The first examples of single crystals exhibiting salient effects by different structure change mechanisms are reported. The crystals of newly prepared aryl(9-isocyanoanthracene)gold(I) complexes jump in response to two different external stimuli: ultraviolet (UV) irradiation and cooling. The photosalient effect is triggered by photodimerization reaction of the anthracene moieties under photoirradiation. By contrast, the thermosalient effect is caused by anisotropic thermal contraction upon cooling without a chemical structure change. By taking advantage of the multiple-jump feature, we also show sequential jumps of crystals by cooling and then UV irradiation for demonstration of the programmed motion of molecular crystals.

Phase-transition-induced jumping, bending, and wriggling of single crystal nanofibers of coronene

For decades, it has been reported that some organic crystals suddenly crack, break, or jump when they are heated from room temperature. Recently, such crystals have been intensively studied both in fundamental science and for high-speed mechanical device applications. According to these studies, the sudden crystal motions have been attributed to structural phase transitions induced by heating. Stress created by the phase transition is released through the sudden and rapid motion of the crystals. Here we report that single crystal nanofibers of coronene exhibit a new type of ultrafast motion when they are cooled from room temperature and subsequently heated to room temperature. The nanofibers make centimeter-scale jumps accompanied by surprisingly unique behaviors such as sharp bending and wriggling. We found that the motions are caused by a significantly fast structural phase transition between two polymorphs of coronene. A theoretical investigation revealed that the sudden force generated by the phase transition together with the nanoscale dimensions and elastic properties create dynamical instability in the nanofibers that results in the motions. Our finding demonstrates the novel mechanism that leads to ultrafast, large deformation of organic crystals.

Dynamic effects in crystalline coordination polymers

Dynamic macroscopic behaviour of single crystals of coordination polymers when subjected to light, heat, and mechanical force.

Photomechanical response of sulfonylhydrazone molecular crystals

Photomechanical responses of the single crystals of a series of sulfonylhydrazones are explored for the first time.

Structure–mechanical property relationship of a pentapeptide crystal

A peptide having miniature (P)310/α-helix conformation, forms intermolecular H-bonded supramolecular helical bundle structure which further self-assembled to interdigited supramolecular sheet-like structure that eventually from the brittle crystal.

Light-fueled rapid macroscopic motion of a green fluorescent organic crystal

We report here a new green fluorescent organic crystal of an amide functionalized acrylonitrile derivative (E-ArF2) that displays various types of macroscopic response when illuminated with UV light (390 nm).

Fluorine as a robust balancer for tuning the reactivity of topo-photoreactions of chalcones and the photomechanical effects of molecular crystals

The higher the number of fluorine atoms, the higher the topological photo-induced [2 + 2] cycloaddition reactivity of chalcones.

Photoinduced topographical surface changes and photoresponse of the crystals of 7-methoxycoumarin

Photoinduced topographical changes, bending, and photosalient effect due to the dimerization reaction were observed on a single crystal of 7-methoxycoumarin, upon deep UV (254 nm) light irradiation.

Single-Crystal-to-Single-Crystal [2 + 2] Photocycloaddition Reaction in a Photosalient One-Dimensional Coordination Polymer of Pb(II)

In a remarkable example, we report a one-dimensional coordination polymer (CP) of Pb(II) showing photosalient (PS) properties triggered by [2 + 2] cycloaddition of olefinic ligands, which is seldom observed in CPs. Macroscopic rod-shaped crystals show various photomechanical effects such as jumping, splitting, rolling, and breaking upon UV illumination. In this rare example, we could determine the solid-state structure of the 100% dimerized product and three intermediate structures, even after the shattering of crystals into small pieces. Detailed mechanistic investigation from the single-crystal data indicates that the strain generated in the unit cell due to anisotropic expansion played a bigger role for the PS effects. Nucleated growth of the photoproduct crystal created different domains inside the single crystal, which multiplied the already developed stress leading to the photomechanical movements. This example falls in the gray area of a clean single-crystal-to-single-crystal (SCSC) transformation and violent PS effect. Such photochemical behavior has never been reported before.

Symmetry Breaking and Photomechanical Behavior of Photochromic Organic Crystals

Photomechanical materials exhibit mechanical motion in response to light as an external stimulus. They have attracted much attention because they can convert light energy directly to mechanical energy, and their motions can be controlled without any physical contact. This review paper introduces the photomechanical motions of photoresponsive molecular crystals, especially bending and twisting behaviors, from the viewpoint of symmetry breaking. The bending (right–left symmetry breaking) and twisting (chiral symmetry breaking) of photomechanical crystals are based on both intrinsic and extrinsic factors like molecular orientation in the crystal and illumination conditions. The ability to design and control this symmetry breaking will be vital for generating new science and new technological applications for organic crystalline materials.

Light-Driven Crawling of Molecular Crystals by Phase-Dependent Transient Elastic Lattice Deformation

The light-driven crawling of a molecular crystal that can form three phases, (α, β, and γ) is presented. Laser irradiation of the molecular crystal can generate phase-dependent transient elastic lattice deformation. The resulting elastic lattice deformation that follows scanning irradiation of a laser can actuate the different phases of molecular crystal to move with different velocity and direction. Because the γ phase has a large Young's modulus (ca. 26 GPa), a force of 0.1 μN can be generated under one laser spot. The generated force is sufficient to actuate the γ-formed molecular crystals in a wide dimensional range to move longitudinally at a velocity of about 60 μm min^-1 , which is two orders of magnitude faster than the α and β phases.

Fabrication of Photoactuators: Macroscopic Photomechanical Responses of Metal-Organic Frameworks to Irradiation by UV Light

Photoreactive olefinic species are incorporated into a metal-organic framework (MOF), [Zn(bdc)(3-F-spy)] (1). Single crystals of 1 are shown to undergo three types of photomechanical macroscopic deformation upon illumination by UV light. To demonstrate the practical potential of this system, the inclusion of 1 in a PVA (polyvinyl alcohol) composite membrane, by exploiting hydrogen-bonding interactions, is presented. Using this composite membrane, the amplification of mechanical stress to achieve macroscopic actuation behavior is demonstrated. These results pave the way for the generation of MOF-based soft photoactuators that produce clearly defined mechanical responses upon irradiation with light. Such systems are anticipated to have considerable potential in photomechanical energy harvesting and conversion systems.

Photosalient Effect of Diarylethene Crystals of Thiazoyl and Thienyl Derivatives

The photoresponse of diarylethene crystals is found to depend on the intensity of UV light, that is, photoinduced bending is switched to photosalient phenomena by increasing the light intensity. The change in the size of the crystal unit cell upon UV irradiation is larger for asymmetric diarylethenes with thiazole and thiophene rings than that for the corresponding symmetric diarylethenes. As a result, the crystals of an asymmetric diarylethene show much more drastic photosalient effects than those of the corresponding symmetric diarylethene crystals upon UV irradiation. It is also found that the crystals of diarylethene, which have not previously been reported to exhibit a photosalient effect, show photosalient phenomena upon irradiation with strong UV light. Furthermore, the dependence of photosalient phenomena on the size and shape of the crystals is reported.