Direct Formation of Large-Area 2D Nanosheets from Fluorescent Semiconducting Homopolymer with Orthorhombic Crystalline Orientation

Well-Defined Homopolymer Nanoparticles with Uniaxial Molecular Orientation by Synchronized Polymerization and Self-Assembly

Synthesizing anisotropic polymeric nanoparticles (NPs) with well-defined shapes, dimensions, and molecular orientations is a very challenging task. Herein, we report the synthesis of surprisingly highly uniform shape-anisotropic polymer NPs with uniaxial internal molecular orientation. Keys to our method are synchronized polymerization and self-assembly (SPSA), which can even be realized by regular dispersion polymerization. This is demonstrated using a monomer containing a rigid 4-nitroazobenzene (NAB) side group. The short nucleation period, the completion of microphase separation before molecular motion is frozen, and sufficient low particle/solvent interfacial tension are shown to be the origins of the highly uniform dimensions, single liquid crystal domains, and well-defined anisotropic shape of particles. The liquid crystallization ability of the polymers, control of molecular weight distribution, and the polymerization kinetics are identified as three key factors controlling the NP formation. The uniformity of these NPs facilitates their SA formation into colloidal crystals. The particles exhibit optically anisotropic properties depending on orientations and, in particular, show intriguing photoswitchable LC-glass (order-disorder) transition, which can be used for the detection of ultraviolet (UV) light and allows the fabrication of photoreversible colloidal films.

Independent Control of the Width and Length of Semiconducting 2D Nanorectangles via Accelerated Living Crystallization-Driven Self-Assembly

Self-assembly of conjugated polymers offers a powerful method to prepare semiconducting two-dimensional (2D) nanosheets for optoelectronic applications. However, due to the typical biaxial growth behavior of the polymer self-assembly, independent control of the width and length of 2D sheets has been challenging. Herein, we present a greatly accelerated crystallization-driven self-assembly (CDSA) system of polyacetylene-based conjugated polymer to produce 2D semiconducting nanorectangles with precisely controllable dimensions. In detail, rectangular 2D seeds with tunable widths of 0.2-1.3 μm were produced by changing the cosolvent% and grown in the length direction by uniaxial living CDSA up to 11.8 μm. The growth rate was effectively enhanced by tuning the cosolvent%, seed concentration, and temperature, achieving up to 27-fold increase. Additionally, systematic kinetic investigation yielded empirical rate equations, elucidating the relationship between growth rate constant, cosolvent%, seed concentration, and seed width. Finally, the living CDSA allowed us to prepare penta-block comicelles with tunable width, length, and height.

Concentric hollow multi-hexagonal platelets from a small molecule

The creation of well-defined hollow two-dimensional structures from small organic molecules, particularly those with controlled widths and numbers of segments, remains a formidable challenge. Here we report the fabrication of the well-defined concentric hollow two-dimensional platelets with programmable widths and numbers of segments through constructing a concentric multiblock two-dimensional precursor followed by post-processing. The fabrication of concentric multi-hexagons two-dimensional platelets is realized by the alternative heteroepitaxial growth of two donor-acceptor molecules. Upon ultraviolet irradiation, one of the two donor-acceptor molecules can be selectively oxidized by singlet oxygen generated during the process, and the oxidized product becomes more soluble due to increased polarity. This allows for selective removal of the oxidized segments simply by solvent dissolution, yielding hollow multiblock two-dimensional structures. The hollow two-dimensional platelets can be utilized as templates to lithograph complex electrodes with precisely controlled gap sizes, thereby offering a platform for examining the optoelectronic performance of functional materials.

Understanding the Seeded Heteroepitaxial Growth of Crystallizable Polymers: The Role of Crystallization Thermodynamics

Seeded heteroepitaxial growth is a "living" crystallization-driven self-assembly (CDSA) method that has emerged as a promising route to create uniform segmented nanoparticles with diverse core chemistries by using chemically distinct core-forming polymers. Our previous results have demonstrated that crystallization kinetics is a key factor that determines the occurrence of heteroepitaxial growth, but an in-depth understanding of controlling heteroepitaxy from the perspective of crystallization thermodynamics is yet unknown. Herein, we select crystallizable aliphatic polycarbonates (PxCs) with a different number of methylene groups (xCH2, x = 4, 6, 7, 12) in their repeating units as model polymers to explore the effect of lattice match and core compatibility on the seeded growth behavior. Seeded growth of PxCs-containing homopolymer/block copolymer blend unimers from poly(ε-caprolactone) (PCL) core-forming seed platelet micelles exhibits distinct crystal growth behavior at subambient temperatures, which is governed by the lattice match and core compatibility. A case of seeded growth with better core compatibility and a smaller lattice mismatch follows epitaxial growth, where the newly created crystal domain has the same structural orientation as the original platelet substrate. In contrast, a case of seeded growth with better core compatibility but a larger lattice mismatch shows nonepitaxial growth with less-defined crystal orientations in the platelet plane. Additionally, a case of seeded growth with poor core compatibility and larger lattice mismatch results in polydisperse platelet micelles, whereby crystal formation is not nucleated from the crystalline substrate. These findings reveal important factors that govern the specific crystal growth during a seeded growth approach by using compositionally distinct cores, which would further guide researchers in designing 2D segmented materials via polymer crystallization approaches.

Apparent symmetry rising induced by crystallization inhibition in ternary co-crystallization-driven self-assembly

The concept of apparent symmetry rising, opposite to symmetry breaking, was proposed to illustrate the unusual phenomenon that the symmetry of the apparent morphology of the multiply twinned particle is higher than that of its crystal structure. We developed a unique strategy of co-crystallization-driven self-assembly of amphiphilic block copolymers PEO-b-PS and the inorganic cluster silicotungstic acid to achieve apparent symmetry rising of nanoparticles under mild conditions. The triangular nanoplates triply twinned by orthogonal crystals (low symmetry) have an additional triple symmetry (high symmetry). The appropriate crystallization inhibition of short solvophilic segments of the block copolymers favors the oriented attachment of homogeneous domains of hybrid nanoribbons, and consequently forms kinetic-controlled triangular nanoplates with twin grain boundaries.

Size-Tunable Semiconducting 2D Nanorectangles from Conjugated Polyenyne Homopolymer Synthesized via Cascade Metathesis and Metallotropy Polymerization

Size-tunable semiconducting two-dimensional (2D) nanosheets from conjugated homopolymers are promising materials for easy access to optoelectronic applications, but it has been challenging due to the low solubility of conjugated homopolymers. Herein, we report size-tunable and uniform semiconducting 2D nanorectangles via living crystallization-driven self-assembly (CDSA) of a fully conjugated polyenyne homopolymer prepared by cascade metathesis and metallotropy (M&M) polymerization. The resulting polyenyne with enhanced solubility successfully underwent living CDSA via biaxial growth mechanism, thereby producing 2D nanorectangles with sizes precisely tuned from 0.1 to 3.0 μm² with narrow dispersity mostly less than 1.1 and low aspect ratios less than 3.1. Furthermore, living CDSA produced complex 2D block comicelles with different heights from various degrees of polymerization (DPs) of unimers. Based on diffraction analyses and DFT calculations, we proposed an interdigitating packing model with an orthorhombic crystal lattice of semiconducting 2D nanorectangles.

Practical Route for Catalytic Ring-Opening Metathesis Polymerization

Norbornene derivatives are typical monomers for ring-opening metathesis polymerization (ROMP) for synthesizing highly functional polymers. However, the lack of catalytic methods, that is, the lack of readily available chain transfer agents (CTAs) for these monomers has been a significant cost limitation when large-scale syntheses are required. Here, we report commercially available styrene and its derivatives as efficient regioselective CTAs for the catalytic synthesis of metathesis polymers requiring up to 1000 times less ruthenium than in classical ROMP experiments. The molecular weight of the synthesized polymers was controlled by the monomer-to-CTA ratio. Low molecular weight ROMP polymers known for their antimicrobial properties were also synthesized on a gram scale in this report. Polymers were characterized by SEC, ¹H NMR spectroscopy, and isotopically resolved MALDI-TOF MS. This approach describes a greener, more cost-effective, and eco-friendly methodology for the preparation of metathesis-based materials on the multigram scale.

2D Hexagonal Assemblies of Amphiphilic Double-Helical Poly(phenylacetylene) Homopolymers with Enhanced Circularly Polarized Luminescence and Chiral Self-Sorting

Two-dimensional (2D) chiral materials have been attracting immense attentions owing to their unique properties. Herein, we successfully developed a unique assembly strategy of amphiphilic homopolymers to construct stable free-standing 2D chiral nanosheets in solution. The amphiphilic poly(phenylacetylene) (PPA) homopolymers bearing the hydrophobic and hydrophilic dendritic side chains adopt a DNA-like double-helical conformation. The regular hexagonal nanosheets were formed in THF/EtOH through nucleation and epitaxial growth. The sizes of the nanosheets can be modulated from nanometers to submillimeters upon varying the ratio of binary solvents, while the thickness is linearly correlated with the molecular weights. The 2D architecture can significantly enhance the CPL of polymers with a high dissymmetry factor ≈0.1. Driven by a discrimination of helical conformation, the PPAs can self-sort into homochiral 2D nanosheets, as directly visualized by using fluorescent microscopy.

Self-Assembly of Copolymers Containing Crystallizable Blocks: Strategies and Applications

The self-assembly of copolymers containing crystallizable block in solution has received increasing attentions in the past few years. Various strategies including crystallization-driven self-assembly (CDSA) and polymerization-induced CDSA (PI-CDSA) have been widely developed. Abundant self-assembly morphologies were captured and advanced applications have been attempted. In this review, the synthetic strategies including the mechanisms and characteristics are highlighted, the survey on the advanced applications of crystalline nano-assemblies are collected. This review is hoped to depict a comprehensive outline for self-assembly of copolymers containing crystallizable block in recent years and to prompt the development of the self-assembly technology in interdisciplinary field. This article is protected by copyright. All rights reserved.

π-Conjugated-polymer-based nanofibers through living crystallization-driven self-assembly: preparation, properties and applications

π-Conjugated-polymer-based nanofibers (CPNFs) of controlled length, composition and morphology are promising for a broad range of emerging applications in optoelectronics, biomedicine and catalysis, owing to the morphological merits of fiber-like nanostructures and structural attributes of π-conjugated polymers. Living crystallization-driven self-assembly (CDSA) of π-conjugated-polymer-containing block copolymers (BCPs) has emerged as an efficient strategy to prepare CPNFs with precise dimensional and structural controllability by taking advantage of the crystallinity of π-conjugated polymers. In this review, recent advances in the generation of CPNFs have been highlighted. The influence of the structure of π-conjugated-polymer-containing BCPs and experimental conditions on the CDSA behaviors, especially seeded growth and self-seeding processes of living CDSA, has been discussed in detail, aiming to provide an in-depth overview of living CDSA of π-conjugated-polymer-containing BCPs. In addition, the properties of CPNFs as well as their potential applications have been illustrated. Finally, we put forward the current challenges and research directions in the field of CPNFs.

Programmable Assembly of π-Conjugated Polymers

π-Conjugated polymers have numerous applications due to their advantageous optoelectronic and mechanical properties. These properties depend intrinsically on polymer ordering, including crystallinity, orientation, morphology, domain size, and π-π interactions. Programming, or deliberately controlling the composition and ordering of π-conjugated polymers by well-defined inputs, is a key facet in the development of organic electronics. Here, π-conjugated programming is described at each stage of material development, stressing the links between each programming mode. Covalent programming is performed during polymer synthesis such that complex architectures can be constructed, which direct polymer assembly by governing polymer orientation, π-π interactions, and morphological length-scales. Solution programming is performed in a solvated state as polymers dissolve, aggregate, crystallize, or react in solution. Solid-state programming occurs in the solid state and is governed by polymer crystallization, domain segregation, or gelation. Recent progress in programming across these stages is examined, highlighting order-dependent features and assembly techniques that are unique to π-conjugated polymers. This should serve as a guide for delineating the many ways of directing π-conjugated polymer assembly to control ordering, structure, and function, enabling the further development of organic electronics.

Crosslinked Polydicyclopentadiene Nanoparticles via Ring-Opening Metathesis Polymerization-Induced Self-Assembly Approach

In this communication, the preparation of crosslinked polydicyclopentadiene (PDCPD) nanoparticles via ring-opening metathesis polymerization (ROMP)-induced self-assembly approach is reported. For the ROMPs, the macromolecular chain transfer agents (Macro-CTAs) are synthesized via the ring-opening polymerization (ROP) of ε-caprolactone (CL) with cis-2-butene-1,4-diol as the initiator. The ROMPs are performed with chloroform, tetrahydrofuran, toluene, 1,4-dioxane, and N,N-dimethylacetamide as the solvents, respectively, which are catalyzed with Grubbs second generation catalyst. It is found that the crosslinked PDCPD nanoparticles are obtained with spherical, cylindrical to planar morphologies, depending on the molecular weights of Macro-CTAs, the concentrations of DCPD and the natures of solvents. The polymerization induced self-assembly (ROMPISA) by the use of a non-norbornene-based macromolecular chain transfer agent provides a new and efficient approach to prepare crosslinked polymer nanoparticles.

Semi-conducting 2D rectangles with tunable length via uniaxial living crystallization-driven self-assembly of homopolymer

Semi-conducting two-dimensional (2D) nanoobjects, prepared by self-assembly of conjugated polymers, are promising materials for optoelectronic applications. However, no examples of self-assembled semi-conducting 2D nanosheets whose lengths and aspect ratios are controlled at the same time have been reported. Herein, we successfully prepared uniform semi-conducting 2D sheets using a conjugated poly(cyclopentenylene vinylene) homopolymer and its block copolymer by blending and heating. Using these as 2D seeds, living crystallization-driven self-assembly (CDSA) was achieved by adding the homopolymer as a unimer. Interestingly, unlike typical 2D CDSA examples showing radial growth, this homopolymer assembled only in one direction. Owing to this uniaxial growth, the lengths of the 2D nanosheets could be precisely tuned from 1.5 to 8.8 μm with narrow dispersity according to the unimer-to-seed ratio. We also studied the growth kinetics of the living 2D CDSA and confirmed first-order kinetics. Subsequently, we prepared several 2D block comicelles (BCMs), including penta-BCMs in a one-shot method.

Emerging applications for living crystallization-driven self-assembly

The use of crystallization as a tool to control the self-assembly of polymeric and molecular amphiphiles in solution is attracting growing attention for the creation of non-spherical nanoparticles and more complex, hierarchical assemblies. In particular, the seeded growth method termed living crystallization-driven self-assembly (CDSA) has been established as an ambient temperature and potentially scalable platform for the preparation of low dispersity samples of core-shell fiber-like or platelet micellar nanoparticles. Significantly, this method permits predictable control of size, and access to branched and segmented structures where functionality is spatially-defined. Living CDSA operates under kinetic control and shows many analogies with living chain-growth polymerizations of molecular organic monomers that afford well-defined covalent polymers of controlled length except that it covers a much longer length scale (ca. 20 nm to 10 μm). The method has been applied to a rapidly expanding range of crystallizable polymeric amphiphiles, which includes block copolymers and charge-capped homopolymers, to form assemblies with crystalline cores and solvated coronas. Living CDSA seeded growth methods have also been transposed to a wide variety of π-stacking and hydrogen-bonding molecular species that form supramolecular polymers in processes termed "living supramolecular polymerizations". In this article we outline the main features of the living CDSA method and then survey the promising emerging applications for the resulting nanoparticles in fields such as nanomedicine, colloid stabilization, catalysis, optoelectronics, information storage, and surface functionalization.

Direct formation of nano-objects via in situ self-assembly of conjugated polymers

The development of the polymer self-assembly method “in situ nanoparticlization of conjugated polymers” is discussed in this Perspective.

Rapid formation and real-time observation of micron-sized conjugated nanofibers with tunable lengths and widths in 20 minutes by living crystallization-driven self-assembly

Preparing well-defined semiconducting nanostructures from conjugated polymers is of paramount interest for organic optoelectronic devices. Several studies have demonstrated excellent structural and size control from block copolymers (BCPs) containing non-conjugated blocks via crystallization-driven self-assembly (CDSA); however, the precise control of their size and shape remains a challenge due to their poor solubility, causing rapid and uncontrolled aggregation. This study presents a new type of fully conjugated BCP comprising two polyacetylene derivatives termed poly(cyclopentenylene-vinylene) to prepare semiconducting 1D nanofibers. Interestingly, the widths of nanofibers were tuned from 12 to 32 nm based on the contour lengths of their crystalline core blocks. Their lengths could also be controlled from 48 nm to 4.7 μm using the living CDSA. Monitoring of the growth kinetics of the living CDSA revealed the formation of micron-sized 1D nanofibers in less than 20 min. The rapid CDSA enabled us to watch real-time growth using confocal fluorescence microscopy.

New fully conjugated block copolymers formed semiconducting 1D nanofibers with excellent structural and size control. The rapid living CDSA enabled us to watch the real-time video of the whole self-assembly process.

Spectroscopy and excited state dynamics of nearly infinite polyenes

Steady-state and transient absorption spectra with <50 fs time resolution were obtained for two conjugated polymers, both with ≈200 conjugated double bonds (N), constrained in planar, stable, polyene frameworks. Solutions of the polymers exhibit the same S2 → S1 → S* → S0 decay pathway observed for the N = 11-19 polyene oligomers and for zeaxanthin homologues with N = 11-23. Comparisons with the excited state dynamics of polydiactylene and a much longer, more disordered polyene polymer (poly(DEDPM)) show that the S2, S1, and S* lifetimes of the four polymers are almost identical. The S* signals in the polymers are assigned to absorption from vibrationally excited ground states. In spite of significant heterogeneities and variations in conjugation lengths in these long polyenes, their S0 → S2 absorptions are vibronically-resolved in room temperature solutions with electronic origins at ≈600 nm. The limiting wavelength for the S0 → S2 transitions is consistent with the persistence of bond length alternation in the electronic ground states and a HOMO-LUMO band gap in polyenes with N ≈ 200. The coincidence of the well-resolved S0 → S2 electronic origins and the convergence of the excited state lifetimes in the four polymers point to a common, "nearly infinite" polyene limit.

Interfacial self-assembly of amphiphilic conjugated block copolymer into 2D nanotapes

In the present work, the evaporation-induced interfacial self-assembly behavior of an amphiphilic conjugated polymer, poly(3-hexylthiophene)-b-poly(acrylic acid) (P3HT-b-PAA), at the oil-water interface is explored. Novel 2D nanotapes of P3HT-b-PAA are prepared via the interfacial self-assembly. It is inferred that P3HT segments adopt a special conformation at the oil-water interface, which facilitates the packing of alkyl side chains and π-π interaction. The UV-vis spectrum further confirms that the ordering degree of P3HT segments is increased while transmission IR and Raman spectroscopic studies suggest that the P3HT chains adopt a more planar conformation at the oil-water interface. It is proposed that the formation of the nanotapes is driven by the ordered packing of the P3HT chains at the oil-water interface. Finally, the packing model of the P3HT chains inside the nanotapes is roughly proposed.

Living β-selective cyclopolymerization using Ru dithiolate catalysts

Cyclopolymerization (CP) of 1,6-heptadiyne derivatives is a powerful method for synthesizing conjugated polyenes containing five- or six-membered rings via α- or β-addition, respectively. Fifteen years of studies on CP have revealed that user-friendly Ru-based catalysts promoted only α-addition; however, we recently achieved β-selective regiocontrol to produce polyenes containing six-membered-rings, using a dithiolate-chelated Ru-based catalyst. Unfortunately, slow initiation and relatively low catalyst stability inevitably led to uncontrolled polymerization. Nevertheless, this investigation gave us some clues to how successful living polymerization could be achieved. Herein, we report living β-selective CP by rational engineering of the steric factor on monomer or catalyst structures. As a result, the molecular weight of the conjugated polymers from various monomers could be controlled with narrow dispersities, according to the catalyst loading. A mechanistic investigation by in situ kinetic studies using 1H NMR spectroscopy revealed that with appropriate pyridine additives, imposing a steric demand on either the monomer or the catalyst significantly improved the stability of the propagating carbene as well as the relative rates of initiation over propagation, thereby achieving living polymerization. Furthermore, we successfully prepared diblock and even triblock copolymers with a broad monomer scope.

Synthesis of Functional Polyacetylenes via Cyclopolymerization of Diyne Monomers with Grubbs-type Catalysts

Metathesis cyclopolymerization (CP) of α,ω-diynes is a powerful method to prepare functional polyacetylenes (PAs). PAs have long been studied due to their interesting electrical, optical, photonic, and magnetic properties which make them candidates for use in various advanced applications. Grubbs catalysts are widely used throughout synthetic chemistry, largely due to their accessibility, high reactivity, and tolerance to air, moisture, and many functional groups. Prior to our entrance into this field, only a few examples of CP using modified Grubbs catalysts existed. Inspired by these works, we saw an opportunity to expand the accessibility and utility of Grubbs-catalyzed CPs. We began by exploring CP with popular and commercially available Grubbs catalysts. We found Grubbs third-generation catalyst (G3) to be an excellent catalyst when we used strategies to stabilize the propagating Ru carbene, such as decreasing the polymerization temperature or using weakly coordinating solvent or ligands. Controlled living polymerizations were demonstrated using various 1,6-heptadiyne monomers and yielded polymers with exclusively 5-membered rings (via α-addition) in the polymer backbone. The strategy of stabilizing the Ru carbene was also critical to successful CP with Hoveyda-Grubbs second-generation (HG2) and Grubbs first-generation (G1) catalysts. We found that decomposed Ru species were catalyzing side reactions which could be completely shut down by decreasing the reaction temperature or using weakly coordinating ligands. While HG2 generally led to uncontrolled polymerizations, we found it to be an effective catalyst for monomers with very large side chains. G1 displayed broader functional group tolerance and thus broader monomer scope than G3. We next looked at our ability to change the regioselectivity of the polymerization by using Z-selective catalysts which favor β-addition and the formation of 6-membered rings in the polymer backbone. While modest β-selectivity could be obtained using Grubbs Z-selective catalyst at low temperatures, we found that by using one of Hoveyda and co-workers' catalysts with decreased carbene electrophilicity, we could achieve exclusive formation of 6-membered rings. We also pursued alternative routes to achieve 6+-membered rings in the polymer backbone by using diyne monomers with increased distance between alkynes. We found that optimizing the monomer structure for CP was an effective strategy to achieve controlled polymerizations. By using bulky substituents (maximizing the Thorpe-Ingold effect) and/or using heteroatoms (shorter bonds) to bring the alkynes closer together, controlled living CP could be achieved with various 1,7-octadiyne and 1,8-nonadiyne monomers. Finally, we took advantage of several inherent properties of controlled CP techniques to prepare polymers with advanced architectures and nanostructures. For instance, the living nature of the polymerization enabled production of block copolymers, the tolerance of very large substituents enabled production of dendronized and brush polymers, and the insolubility or crystallinity of some monomers was utilized for the spontaneous self-assembly of polymers into various one- and two-dimensional nanostructures. Overall, the strategies of stabilizing the propagating Ru carbene, modulating the selectivity and reactivity of the Ru carbene, and enhancing the inherent reactivity of monomers were key to improving the utility and performance of CP with Grubbs-type catalysts. The insight provided by these studies will be important for future developments of CP and other metathesis polymerizations utilizing ring-closing steps.

Creation of Centimeter-Sized 2 D Crystalline Film by Crystallization of Homopolymer in Solution

The 2 D assembly of polymers to form free-standing and large crystalline films is quite appealing but very challenging. Although there have been some works using interface templates, reports of in situ assembly in solution are still rare. Herein, a simple strategy is developed for the creation of a free-standing and centimeter-sized 2 D crystalline polymer film through crystallization of an amphiphilic brush polydiacetylene (PDA) in solution. The film exhibits good shape memory, a low dielectric constant, and good carrier mobility. This strategy may be applied extensively to produce a variety of other macroscopic 2 D crystalline polymer films for applications in electronics, catalysis, and so on.

Probing the Growth Kinetics for the Formation of Uniform 1D Block Copolymer Nanoparticles by Living Crystallization-Driven Self-Assembly

Living crystallization-driven self-assembly (CDSA) is a seeded growth method for crystallizable block copolymers (BCPs) and related amphiphiles in solution and has recently emerged as a highly promising and versatile route to uniform core-shell nanoparticles (micelles) with control of dimensions and architecture. However, the factors that influence the rate of nanoparticle growth have not been systematically studied. Using transmission electron microscopy, small- and wide-angle X-ray scattering, and super-resolution fluorescence microscopy techniques, we have investigated the kinetics of the seeded growth of poly(ferrocenyldimethylsilane)- b-(polydimethylsiloxane) (PFS- b-PDMS), as a model living CDSA system for those employing, for example, crystallizable emissive and biocompatible polymers. By altering various self-assembly parameters including concentration, temperature, solvent, and BCP composition our results have established that the time taken to prepare fiber-like micelles via the living CDSA method can be reduced by decreasing temperature, by employing solvents that are poorer for the crystallizable PFS core-forming block, and by increasing the length of the PFS core-forming block. These results are of general importance for the future optimization of a wide variety of living CDSA systems. Our studies also demonstrate that the growth kinetics for living CDSA do not exhibit the first-order dependence of growth rate on unimer concentration anticipated by analogy with living covalent polymerizations of molecular monomers. This difference may be caused by the combined influence of chain conformational effects of the BCP on addition to the seed termini and chain length dispersity.

Cyclopolymerizations: Synthetic Tools for the Precision Synthesis of Macromolecular Architectures

Monomers possessing two functionalities suitable for polymerization are often designed and utilized in syntheses directed to the formation of cross-linked macromolecules. In this review, we give an account of recent developments related to the use of such monomers in cyclopolymerization processes, in order to form linear, soluble macromolecules. These processes can be activated by means of radical, ionic, or transition-metal mediated chain-growth polymerization mechanisms, to achieve cyclic moieties of variable ring size which are embedded within the polymer backbone, driving and tuning peculiar physical properties of the resulting macromolecules. The two functionalities are covalently linked by a "tether", which can be appropriately designed in order to "imprint" elements of chemical information into the polymer backbone during the synthesis and, in some cases, be removed by postpolymerization reactions. The two functionalities can possess identical or even very different reactivities toward the polymerization mechanism involved; in the latter case, consequences and outcomes related to the sequence-controlled, precision synthesis of macromolecules have been demonstrated. Recent advances in new initiating systems and polymerization catalysts enabled the precision syntheses of polymers with regulated cyclic structures by highly regio- and/or stereoselective cyclopolymerization. Cyclopolymerizations involving double cyclization, ring-opening, or isomerization have been also developed, generating unique repeating structures, which can hardly be obtained by conventional polymerization methods.

Molecular Control of Internal Crystallization and Photocatalytic Function in Supramolecular Nanostructures

Supramolecular light-absorbing nanostructures are useful building blocks for the design of next-generation artificial photosynthetic systems. Development of such systems requires a detailed understanding of how molecular packing influences the material's optoelectronic properties. We describe a series of crystalline supramolecular nanostructures in which the substituents on their monomeric units strongly affects morphology, ordering kinetics, and exciton behavior. By designing constitutionally-isomeric perylene monoimide (PMI) amphiphiles, the effect of side chain sterics on nanostructure crystallization was studied. Molecules with short amine linked alkyl-tails rapidly crystallize upon dissolution in water, while bulkier tails require the addition of salt to screen electrostatic repulsion and annealing to drive crystallization. A PMI monomer bearing a 3-pentylamine tail was found to possess a unique structure that results in strongly red-shifted absorbance, indicative of charge-transfer exciton formation. This particular supramolecular structure was found to have an enhanced ability to photosensitize a thiomolybdate, [(NH₄)₂Mo₃S₁₃], catalyst to generate hydrogen gas.

Ultrathin two-dimensional porous organic nanosheets with molecular rotors for chemical sensing

Molecular rotors have played an important role in recent materials chemistry. Although several studies on functional materials containing molecular rotors have been reported for fluorescence sensing, this concept has yet to be realized in two-dimensional (2D) materials. Here we report the preparation of all-carbon, π-conjugated 2D porous organic nanosheets, named NUS-24, which contain flexible tetraphenylethylene (TPE) units as the molecular rotors. NUS-24 nanosheets exhibit high stability, large lateral size, and ultrathin thickness (2-5 nm). The dynamic TPE rotors exposed on the surface of NUS-24 nanosheets can be restricted in the aggregated state with different water fractions, which is reminiscent of the aggregation-induced emission mechanism, thereby leading to the size-selective turn-on fluorescence by volatile organic compounds. Significantly, the ultrathin 2D nanosheets and its composite membranes show much higher sensitivity and selectivity toward Fe³⁺ ions and nitro-containing compounds sensing, suggesting their potential applications in explosive detection and environmental monitoring.

Complex and Hierarchical 2D Assemblies via Crystallization-Driven Self-Assembly of Poly(l-lactide) Homopolymers with Charged Termini

Poly(l-lactide) (PLLA)-based nanoparticles have attracted much attention with respect to applications in drug delivery and nanomedicine as a result of their biocompatibility and biodegradability. Nevertheless, the ability to prepare PLLA assemblies with well-defined shape and dimensions is limited and represents a key challenge. Herein we report access to a series of monodisperse complex and hierarchical colloidally stable 2D structures based on PLLA cores using the seeded growth, "living-crystallization-driven self-assembly" method. Specifically, we describe the formation of diamond-shaped platelet micelles and concentric "patchy" block co-micelles by using seeds of the charge-terminated homopolymer PLLA₂₄[PPh₂Me]I to initiate the sequential growth of either additional PLLA₂₄[PPh₂Me]I or a crystallizable blend of the latter with the block copolymer PLLA₄₂-b-P2VP₂₄₀, respectively. The epitaxial nature of the growth processes used for the creation of the 2D block co-micelles was confirmed by selected area electron diffraction analysis. Cross-linking of the P2VP corona of the peripheral block in the 2D block co-micelles using Pt nanoparticles followed by dissolution of the interior region in good solvent for PLLA led to the formation of novel, hollow diamond-shaped assemblies. We also demonstrate that, in contrast to the aforementioned results, seeded growth of the unsymmetrical PLLA BCPs PLLA₄₂-b-P2VP₂₄₀ or PLLA₂₀-b-PAGE₈₀ alone from 2D platelets leads to the formation of diamond-fiber hybrid structures.