Confinement of Ultrasmall Cu/ZnOx Nanoparticles in Metal–Organic Frameworks for Selective Methanol Synthesis from Catalytic Hydrogenation of CO2

Orbital and free energy landscape expedition towards the unexplored catalytic realm of aromatically modified FLPs for CO2 sequestration

The emergence of frustrated Lewis pairs (FLPs) has created a whole new dimension in the development of metal free catalysts for CO2 sequestration. Efforts have been made to enhance the catalytic activity of the FLPs. The aromatic modulation of the catalytic sites has been successfully demonstrated to enhance the activity towards CO2. Although various aromatically modified geminal FLPs have been investigated for CO2 capture, the catalytic space of these FLPs has not been fully resolved yet. Thus, to fulfil the knowledge gap in the understanding of the catalytic behaviour and to extend the concept of aromatically enhanced FLPs, in the present study all the possible combinations of aromatic and antiaromatic modulations of the acidic and basic sites have been proposed and examined using density functional theory based orbital analysis. Further to verify the results obtained from the orbital analysis and to fully explore the catalytic space of the proposed systems, free energy landscapes have been examined using metadynamics simulations. The detailed intrinsic bond orbital (IBO) and principal interacting orbital (PIO) analyses capture crucial details of the reactions. Furthermore, evolution of anisotropy of induced current density (AICD) along the reaction justifies the effect of aromatic/antiaromatic modulation on the catalytic sites. The results show that highly asynchronous mechanisms have been found due to the aromatic/antiaromatic modulations. The simultaneous favourable aromatic/antiaromatic modification on the acidic and basic sites may greatly reduce the CO2 activation barrier. The enhancement of the acidic character of the B atom in the intramolecular FLPs (IFLPs) leads to a thermodynamically more feasible reaction with stable CO2 adducts. The acidic site has been found to play a major role in controlling the kinetics and thermodynamics of the reaction. This study provides valuable insights into the catalytic realm of the aromatically modified FLPs, which can be utilized to design more efficient and specific next-generation FLPs.

Highly Dispersed Pd@ZIF-8 for Photo-Assisted Cross-Couplings and CO2 to Methanol: Activity and Selectivity Insights

Our study unveils a pioneering methodology that effectively distributes Pd species within a zeolitic imidazolate framework-8 (ZIF-8). We demonstrate that Pd can be encapsulated within ZIF-8 as atomically dispersed Pd species that function as an excited-state transition metal catalyst for promoting carbon-carbon (C-C) cross-couplings at room temperature using visible light as the driving force. Furthermore, the same material can be reduced at 250 °C, forming Pd metal nanoparticles encapsulated in ZIF-8. This catalyst shows high rates and selectivity for carbon dioxide hydrogenation to methanol under industrially relevant conditions (250 °C, 50 bar): 7.46 molmethanol molmetal -1 h-1 and >99 %. Our results demonstrate the correlations of the catalyst structure with the performances at experimental and theoretical levels.

Redispersing Ir Nanoparticles via a Carbon-Assisted Pyrolysis Process to Break the Activity-Stability Trade-Off of H2 Sensors

Oxide semiconductor-supported metal nanoparticles often suffer from a high-temperature gas sensing process, resulting in agglomeration and coalescence, which significantly decrease their surface activity and stability. Here, we develop an in situ pyrolysis strategy to redisperse commercial Ir particles (∼15.6 nm) into monodisperse Ir species (∼5.4 nm) on ZnO supports, exhibiting excellent sintering-resistant properties and H2 sensing. We find that large-size Ir nanoparticles can undergo an unexpected splitting decomposition process and spontaneously migrate along the encapsulated carbon layer surface during high-temperature pyrolysis of ZIF-8. This resultant monodisperse status can be integrally reserved, accompanying further oxidation sintering. The final Irred/ZnO-450-based sensor exhibits outstanding stability, H2 response (10-2000 ppm), fast response/recovery capability (7/9.7 s@100 ppm), and good moisture resistance. In situ Raman and ex situ XPS further experimentally verify that highly dispersive Ir species can promote the electron transfer process during the gas sensing process. Our strategy thus provides important insights into the design of agglomeration-resistant gas sensing materials for highly effective H2 detection.

Promoted hydrogenation of CO2 to methanol over single-atom Cu sites with Na+-decorated microenvironment

Although single-atom Cu sites exhibit high efficiency in CO2 hydrogenation to methanol, they are prone to forming Cu nanoparticles due to reduction and aggregation under reaction conditions, especially at high temperatures. Herein, single-atom Cu sites stabilized by adjacent Na+ ions have been successfully constructed within a metal-organic framework (MOF)-based catalyst, namely MOF-808-NaCu. It is found that the electrostatic interaction between the Na+ and Hδ- species plays a pivotal role in upholding the atomic dispersion of Cu in MOF-808-NaCu during CO2 hydrogenation, even at temperatures of up to 275°C. This exceptional stabilization effect endows the catalyst with excellent activity (306 g·kgcat-1·h-1), high selectivity to methanol (93%) and long-term stability at elevated reaction temperatures, far surpassing the counterpart in the absence of Na+ (denoted as MOF-808-Cu). This work develops an effective strategy for the fabrication of stable single-atom sites for advanced catalysis by creating an alkali-decorated microenvironment in close proximity.

Enhanced Proximity of Rh1,2-Rhn Ensembles Encaged in UiO-67 Boosting Catalytic Conversion of Syngas to Oxygenates

Maintaining high conversion under the premise of high oxygenates selectivity in syngas conversion is important but a formidable challenge in Rh catalysis. Monometallic Rh catalysts provide poor oxygenate conversion efficiency, and efforts have been focused on constructing adjacent polymetallic sites; however, the one-pass yields of C2+ oxygenates over the reported Rh-based catalysts were mostly <20 %. In this study, we constructed a monometallic Rh catalyst encapsulated in UiO-67 (Rh/UiO-67) with enhanced proximity to dual-site Rh1,2-Rhn ensembles. Unexpectedly, this catalyst exhibited high efficacy for oxygenate synthesis from syngas, giving a high oxygenate selectivity of 72.0 % with a remarkable CO conversion of 50.4 %, and the one-pass yield of C2+ oxygenates exceeded 25 %. The state-of-the-art characterizations further revealed the spontaneous formation of an ensemble of Rh single atoms/dimers (Rh1,2) in the proximity of ultrasmall Rh clusters (Rhn) confined within the nanocavity of UiO-67, providing adjacent Rh+-Rh0 dual sites dynamically during the reaction that promote the relay of the undissociated CHO species to the CHx species. Thus, our results open a new route for designing highly efficient Rh catalysts for the conversion of syngas to oxygenates by precisely tuning the ensemble and proximity of the dual active sites in a confined space.

Tailoring Type III Porous Ionic Liquids for Enhanced Liquid-Liquid Two-Phase Catalysis

Porous Ionic Liquids (PILs) have gained attention but facing challenges in catalysis, especially in liquid-liquid two-phase reactions due to limited catalytic sites and hydrophilicity control. This work engineered a Type III PILs (PILS-M) using zeolitic imidazolate framework-8 (ZIF-8) confined phosphomolybdic acid (HPMo) as the microporous framework and N-butyl pyridine bis(trifluoromethane sulfonyl) imide ionic liquid ([Bpy][NTf2]) as the solvent. The PILS-M not only combines the advantages of traditional ionic liquids and microporous frameworks, including excellent extraction, high dispersion of catalytically active species, remarkable stability, etc., but also can make the inner surface of ZIF-8 turned to be hydrophilic that favors the contact between aqueous hydrogen peroxide oxidant and catalytically active sites for the promotion of catalytic performance in reactive extractive desulfurization (REDS) processes of fuel oils. This study demonstrates Type III PILs' potential as catalysts for sustainable chemical processes, offering insights into versatile PILs applications in diverse fields.

Bimetallic mutual-doping magnetic aerogels for iodine reduction capture and immobilization

Adsorption is considered to be one of the most effective methods to remove radioiodine from the solution. However, developing highly efficient adsorbents and the rapid recovery of the used adsorbents is still a challenge. Here, a series of Cu/Fe3O4 bimetallic mutual-doping magnetic aerogels (Cu/Fe3O4-BMMA) were synthesized. Based on the in-situ bimetallic co-gelation process, the high dispersion of Cu in the aerogel was realized, providing conditions for the efficient elimination of I2. The Fe3+ in the initial gel was reduced to magnetic Fe3O4 during the preparation process, allowing for the quick recovery of the adsorbent through the application of a magnetic field. The adsorption experiments showed that Cu/Fe3O4-BMMA has good I2 adsorption capacity (631.3 mg/g) and fast capture kinetics (equilibrium time < 30 min). In addition, Cu/Fe3O4-BMMA was able to effectively remove trace I2 in the solution from ppm level (1.0 ppm) down to ppb level (≤30 ppb). The adsorbed I2 was converted into stable CuI, avoiding secondary pollution due to desorption. Overall, this study provides a potentially efficient iodine capture material for long-term decay storage of radioactive iodine.

CO2 Enrichment Boosts Highly Selective Infrared-Light-Driven CO2 Conversion to CH4 by UiO-66/Co9S8 Photocatalyst

Photocatalytic CO2 reduction to high-value chemicals is an attractive approach to mitigate climate change, but it remains a great challenge to produce a specific product selectively by IR light. Hence, UiO-66/Co9S8 composite is designed to couple the advantages of metallic photocatalysts and porous CO2 adsorbers for IR-light-driven CO2-to-CH4 conversion. The metallic nature of Co9S8 endows UiO-66/Co9S8 with exceptional IR light absorption, while UiO-66 dramatically enhances its local CO2 concentration, revealed by finite-element method simulations. As a result, Co9S8 or UiO-66 alone does not show observable IR-light photocatalytic activity, whereas UiO-66/Co9S8 exhibits exceptional activity. The CH4 evolution rate over UiO-66/Co9S8 reaches 25.7 µmol g-1 h-1 with ca.100% selectivity under IR light irradiation, outperforming most reported catalysts under similar reaction conditions. The X-ray absorption fine structure spectroscopy spectra verify the presence of two distinct Co sites and confirm the existence of metallic Co─Co bond in Co9S8. Energy diagrams analysis and transient absorption spectra manifest that CO2 reduction mainly occurs on Co9S8 for UiO-66/Co9S8, while density functional theory calculations demonstrate that high-electron-density Co1 sites are the key active sites, possessing lower energy barriers for further protonation of *CO, leading to the ultra-high selectivity toward CH4.

A Ce-CuZn catalyst with abundant Cu/Zn-OV-Ce active sites for CO2 hydrogenation to methanol

CO2 hydrogenation to chemicals and fuels is a significant approach for achieving carbon neutrality. It is essential to rationally design the chemical structure and catalytic active sites towards the development of efficient catalysts. Here we show a Ce-CuZn catalyst with enriched Cu/Zn-OV-Ce active sites fabricated through the atomic-level substitution of Cu and Zn into Ce-MOF precursor. The Ce-CuZn catalyst exhibits a high methanol selectivity of 71.1% and a space-time yield of methanol up to 400.3 g·kgcat-1·h-1 with excellent stability for 170 h at 260 °C, comparable to that of the state-of-the-art CuZnAl catalysts. Controlled experiments and DFT calculations confirm that the incorporation of Cu and Zn into CeO2 with abundant oxygen vacancies can facilitate H2 dissociation energetically and thus improve CO2 hydrogenation over the Ce-CuZn catalyst via formate intermediates. This work offers an atomic-level design strategy for constructing efficient multi-metal catalysts for methanol synthesis through precise control of active sites.

Copper nanoparticles encapsulated in zeolitic imidazolate framework-8 as a stable and selective CO2 hydrogenation catalyst

Metal-organic frameworks have drawn attention as potential catalysts owing to their unique tunable surface chemistry and accessibility. However, their application in thermal catalysis has been limited because of their instability under harsh temperatures and pressures, such as the hydrogenation of CO2 to methanol. Herein, we use a controlled two-step method to synthesize finely dispersed Cu on a zeolitic imidazolate framework-8 (ZIF-8). This catalyst suffers a series of transformations during the CO2 hydrogenation to methanol, leading to ~14 nm Cu nanoparticles encapsulated on the Zn-based MOF that are highly active (2-fold higher methanol productivity than the commercial Cu-Zn-Al catalyst), very selective (>90%), and remarkably stable for over 150 h. In situ spectroscopy, density functional theory calculations, and kinetic results reveal the preferential adsorption sites, the preferential reaction pathways, and the reverse water gas shift reaction suppression over this catalyst. The developed material is robust, easy to synthesize, and active for CO2 utilization.

Ferric Oxide Nanocrystals-Embedded Co/Fe-MOF with Self-Tuned d-Band Centers for Boosting Urea-Assisted Overall Water Splitting

A novel semiconductive Co/Fe-MOF embedded with Fe2 O3 nanocrystals (Fe2 O3 @CoFe-MOF) is developed as a trifunctional electrocatalyst for the urea oxidation reaction (UOR), oxygen evolution reaction (OER), and hydrogen evolution reaction for enhancing the efficiency of the hydrogen production via the urea-assisted overall water splitting. Fe2 O3 @CoFe-TPyP-MOF comprises unsaturated metal-nitrogen coordination sites, affording enriched defects, self-tuned d-band centers, and efficient π-π interaction between different layers. Density functional theory calculation confirms that the adsorption of urea can be optimized at Fe2 O3 @CoFe-TPyP-MOF, realizing the efficient adsorption of intermediates and desorption of the final product of CO2 and N2 characterized by the in situ Fourier transform infrared spectroscopy. The two-electrode urea-assisted water splitting device-assembled with Fe2 O3 @CoFe-TPyP-MOF illustrates a low cell voltage of 1.41 V versus the reversible hydrogen electrode at the current density of 10 mA cm-2 , attaining the hydrogen production rate of 13.13 µmol min-1 in 1 m KOH with 0.33 m urea. The in situ electrochemical Raman spectra and other basic characterizations of the used electrocatalyst uncover that Fe2 O3 @CoFe-TPyP-MOF undergoes the reversible structural reconstruction after the UOR test, while it demonstrates the irreversible reconstruction after the OER measurement. This work redounds the progress of urea-assisted water spitting for hydrogen production.

Zr-Based MOF-545 Metal-Organic Framework Loaded with Highly Dispersed Small Size Ni Nanoparticles for CO2 Methanation

We report the use of Zr-based metal-organic frameworks (MOFs) MOF-545 and MOF-545(Cu) as supports to prepare catalysts with uniformly and highly dispersed Ni nanoparticles (NPs) for CO2 hydrogenation into CH4. In the first step, we studied the MOF support under catalytic conditions using operando diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, ex situ characterizations (PXRD, XPS, TEM, and EDX-element mapping), and DFT calculations. We showed that the high-temperature conditions undoubtedly confer a potential for catalytic functionality to the solids toward CH4 production, while no role of the Cu could be evidenced. The MOF was shown to be transformed into a catalytically active material, amorphized but still structured with dehydroxylated Zr-oxoclusters, in line with DFT calculations. In the second step, Ni@MOF-545 catalysts were prepared using either impregnation (IM) or double solvent (DS) methods, followed by a dry reduction (R) route under H2 to immobilize Ni NPs. The highest catalytic activity was obtained with the Ni@MOF-545 DS R catalyst (595 mmolCH4 gNi-1 h-1) with 100% CH4 selectivity and 60% CO2 conversion after ∼3 h. The higher catalytic activity of Ni@MOF-545 DS R is a result of much smaller (∼5 nm) and better dispersed Ni NPs than in the IM sample (20-40 nm), the latter exhibiting sintering. The advantages of the encapsulation of Ni NPs by the DS method and of the use of a MOF-545-based support are discussed, highlighting the interest of designing yet-unexplored Zr-based MOFs loaded with Ni NPs for CO2 hydrogenation.

Pd-CeO2 catalyst facilely derived from one-pot generated Pd@Ce-BTC for low temperature CO oxidation

Due to the capacity to offer abundant catalytic sites within porous solids featuring high surface areas, metal-organic frameworks (MOFs) and their derivatives have garnered considerable attention as prospective catalysts in environmental catalysis. To promote the industrial application of MOFs, there is an urgent need for an effective and environmental-friendly preparation approach. Breaking through the limitation of the traditional two-step preparation method that Pd was introduced to the already prepared Ce-BTC (Pd/Ce-BTC, BTC = 1, 3, 5 benzenetricarboxylate), in this work, we present a novel one-pot solvothermal method for synthesizing the Pd material supported by Ce-BTC (Pd@Ce-BTC). After pyrolysis in N2 flow or air flow, Pd-CeO2 catalysts derived from Pd@Ce-BTC exhibited much higher CO oxidation activity than those from Pd/Ce-BTC. Moreover, Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in N2 flow (Pd/Ce-BTC-N and Pd@Ce-BTC-N) could better catalyze the oxidation of CO than Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in air flow (Pd/Ce-BTC-A and Pd@Ce-BTC-A). Further characterizations revealed that the abundant surface Ce3+ species, rich surface adsorbed oxygen species and superior redox properties were the main reasons for the superior CO oxidation activity of Pd@Ce-BTC-N.

Cu and Zn promoted Al-fumarate metal organic frameworks for electrocatalytic CO2 reduction

Metal organic frameworks (MOFs) are attractive materials to generate multifunctional catalysts for the electrocatalytic reduction of CO2 to hydrocarbons. Here we report the synthesis of Cu and Zn modified Al-fumarate (Al-fum) MOFs, in which Zn promotes the selective reduction of CO2 to CO and Cu promotes CO reduction to oxygenates and hydrocarbons in an electrocatalytic cascade. Cu and Zn nanoparticles (NPs) were introduced to the Al-fum MOF by a double solvent method to promote in-pore metal deposition, and the resulting reduced Cu-Zn@Al-fum drop-cast on a hydrophobic gas diffusion electrode for electrochemical study. Cu-Zn@Al-fum is active for CO2 electroreduction, with the Cu and Zn loading influencing the product yields. The highest faradaic efficiency (FE) of 62% is achieved at -1.0 V vs. RHE for the conversion of CO2 into CO, HCOOH, CH4, C2H4 and C2H5OH, with a FE of 28% to CH4, C2H4 and C2H5OH at pH 6.8. Al-fum MOF is a chemically robust matrix to disperse Cu and Zn NPs, improving electrocatalyst lifetime during CO2 reduction by minimizing transition metal aggregation during electrode operation.

Selective Gas-Phase Hydrogenation of CO2 to Methanol Catalysed by Metal-Organic Frameworks

Large scale production of green CH3 OH obtained from CO2 and green H2 is a highly wanted process due to the role of CH3 OH as H2 /energy carrier and for producing chemicals. Starting with a short summary of the advantages of metal-organic frameworks (MOFs) as catalysts in liquid-phase reactions, the present article highlights the opportunities that MOFs may offer also for some gas-phase reactions, particularly for the selective CO2 hydrogenation to CH3 OH. It is commented that there is a temperature compatibility window that combines the thermal stability of some MOFs with the temperature required in the CO2 hydrogenation to CH3 OH that frequently ranges from 250 to 300 °C. The existing literature in this area is briefly organized according to the role of MOF as providing the active sites or as support of active metal nanoparticles (NPs). Emphasis is made to show how the flexibility in design and synthesis of MOFs can be used to enhance the catalytic activity by adjusting the composition of the nodes and the structure of the linkers. The influence of structural defects and material crystallinity, as well as the role that should play theoretical calculations in models have also been highlighted.

Synergistic Interplay of Dual-Active-Sites on Metallic Ni-MOFs Loaded with Pt for Thermal-Photocatalytic Conversion of Atmospheric CO2 under Infrared Light Irradiation

Infrared light driven photocatalytic reduction of atmospheric CO2 is challenging due to the ultralow concentration of CO2 (0.04 %) and the low energy of infrared light. Herein, we develop a metallic nickel-based metal-organic framework loaded with Pt (Pt/Ni-MOF), which shows excellent activity for thermal-photocatalytic conversion of atmospheric CO2 with H2 even under infrared light irradiation. The open Ni sites are beneficial to capture and activate atmospheric CO2 , while the photogenerated electrons dominate H2 dissociation on the Pt sites. Simultaneously, thermal energy results in spilling of the dissociated H2 to Ni sites, where the adsorbed CO2 is thermally reduced to CO and CH4 . The synergistic interplay of dual-active-sites renders Pt/Ni-MOF a record efficiency of 9.57 % at 940 nm for converting atmospheric CO2 , enables the procurement of CO2 to be independent of the emission sources, and improves the energy efficiency for trace CO2 conversion by eliminating the capture media regeneration and molecular CO2 release.

Reticular framework materials for photocatalytic organic reactions

Photocatalytic organic reactions, harvesting solar energy to produce high value-added organic chemicals, have attracted increasing attention as a sustainable approach to address the global energy crisis and environmental issues. Reticular framework materials, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), are widely considered as promising candidates for photocatalysis owing to their high crystallinity, tailorable pore environment and extensive structural diversity. Although the design and synthesis of MOFs and COFs have been intensively developed in the last 20 years, their applications in photocatalytic organic transformations are still in the preliminary stage, making their systematic summary necessary. Thus, this review aims to provide a comprehensive understanding and useful guidelines for the exploration of suitable MOF and COF photocatalysts towards appropriate photocatalytic organic reactions. The commonly used reactions are categorized to facilitate the identification of suitable reaction types. From a practical viewpoint, the fundamentals of experimental design, including active species, performance evaluation and external reaction conditions, are discussed in detail for easy experimentation. Furthermore, the latest advances in photocatalytic organic reactions of MOFs and COFs, including their composites, are comprehensively summarized according to the actual active sites, together with the discussion of their structure-property relationship. We believe that this study will be helpful for researchers to design novel reticular framework photocatalysts for various organic synthetic applications.

Enhancing the Photocatalytic Activity of Zirconium-Based Metal-Organic Frameworks Through the Formation of Mixed-Valence Centers

Despite the desirability of metal-organic frameworks (MOFs) as heterogeneous photocatalysts, current strategies available to enhance the performance of MOF photocatalysts are complicated and expensive. Herein, a simple strategy is presented for improving the activity of MOF photocatalysts by regulating the atomic interface structure of the metal active sites on the MOF. In this study, MOF (PCN-222) is hybridized with cellulose acetate (CA@PCN-222) through an optimized atomic interface strategy, which lowers the average valence state of Zr ions. The electronic metal-support interaction mechanism of CA@PCN-222 is revealed by evaluating the photocatalytic CO2 reduction reaction (CO2 RR). The experimental results suggested that the electron migration efficiency at the atomic interface of the MOFs strongly coupled with cellulose is significantly improved. In particular, the CO2 RR to formate activity of CA@PCN-222 photocatalyst greatly increased from 778.2 to 2816.0 µmol g-1 compared with pristine PCN-222 without cellulose acetate. The findings suggest that the strongly coupled metal-ligand moiety at the atomic interface of MOFs may play a synergistic role in heterogeneous catalysts.

PIO and IBO analysis to unravel the hidden details of the CO2 sequestration mechanism of aromatically tempered N/B-based IFLPs

Enhancing the catalytic reactivity of Frustrated Lewis Pairs (FLPs) in various activities such as CO2 activation and sequestration has recently gained interest among researchers around the globe. A recent investigation showed the use of aromaticity as a tool to modulate the catalytic behaviour of FLPs, establishing a whole new dimension in this area. In this work, aromatically tempered N/B-based intramolecular frustrated Lewis Pairs (IFLPs) are proposed for CO2 sequestration. Density functional theory (DFT)-based calculations were carried out to probe the reaction mechanism. The detailed mechanistic investigation was carried out using intrinsic reaction coordinate (IRC), principal interacting orbital (PIO), intrinsic bond orbital (IBO) and natural bonding orbital (NBO) analyses. The results show that aromatic gain in the system at the basic sites lowers the activation barrier, whereas the antiaromatic gain results in increased activation energy. The sequestration mechanism was found to be an asynchronous concerted mechanism, and polar solvents result in higher asynchronicity. This work, for the first time, reports asynchronicity in the catalytic behavior of aromatically tempered IFLPs, which can be crucial to designing better IFLPs for CO2 sequestration.

Unprecedented Activation of CO2 by α-Amino Boronic Acids

Efficient and environmentally benign transformation of carbon dioxide (CO2) into valuable chemicals is mainly obstructed by the lack of suitable catalysts. To date, various catalysts have already been investigated for the conversion of CO2 molecules, but still finding metal-free, simple, and environment-friendly catalysts is a topic of utmost interest among researchers. Thus, in this regard, the present work projects α-amino boronic acids (AABs) as a metal-free and simple catalyst for CO2 activation. The density functional theory (DFT)-based calculations have been carried out to explore the catalytic potential of AABs. The detailed electronic structure analysis of the considered AABs unveils the catalytic similarities with frustrated Lewis pairs (FLPs) in a gas phase. Interestingly, a peculiar catalytic action of AABs has been observed in the presence of solvents. The contrasting catalytic behavior of AABs in solvents has been extensively investigated by employing principal interacting orbital (PIO), intrinsic bond orbital (IBO), and natural bond orbital (NBO) analyses along the reaction paths. The results of the orbital studies provide concrete ground for the observed reaction mechanism. Further, the energetic analysis of the reaction of CO2 with AABs reveals that <5 kcal/mol energy is required for activation in a solvent phase, and the formed adducts are readily active. These observations show that AABs can be considered as an efficient catalyst for CO2 activation.

Accelerated Catalytic Ozonation in a Mesoporous Carbon-Supported Atomic Fe-N4 Sites Nanoreactor: Confinement Effect and Resistance to Poisoning

The design of a micro-/nanoreactor is of great significance for catalytic ozonation, which can achieve effective mass transfer and expose powerful reaction species. Herein, the mesoporous carbon with atomic Fe-N4 sites embedded in the ordered carbon nanochannels (Fe-N4/CMK-3) was synthesized by the hard-template method. Fe-N4/CMK-3 can be employed as nanoreactors with preferred electronic and geometric catalytic microenvironments for the internal catalytic ozonation of CH3SH. During the CH3SH oxidation process, the mass transfer coefficient of the Fe-N4/CMK-3 confined system with sufficient O3 transfer featured a level of at least 1.87 × 10-5, which is 34.6 times that of the Fe-N4/C-Si unconfined system. Detailed experimental studies and theoretical calculations demonstrated that the anchored atomic Fe-N4 sites and nanoconfinement effects regulated the local electronic structure of the catalyst and promoted the activation of O3 molecules to produce atomic oxygen species (AOS) and reactive oxygen species (ROS), eventually achieving efficient oxidation of CH3SH into CO2/SO42-. Benefiting from the high diffusion rate and the augmentation of AOS/ROS, Fe-N4/CMK-3 exhibited an excellent poisoning tolerance, along with high catalytic durability. This contribution provides the proof-of-concept strategy for accelerating catalytic ozonation of sulfur-containing volatile organic compounds (VOCs) by combining confined catalysis and atomic catalysts and can be extended to the purification of other gaseous pollutants.

Tailoring Zeolite L-Supported-Cu Catalysts for CO2 Hydrogenation: Insights into the Mechanism of CH3OH and CO Formation

The utilization of Cu-based catalysts in CO2 conversion into valuable chemicals is of significant interest due to their potential in mitigating greenhouse gas emissions. However, the controllable design of Cu-based catalysts and the regulation of their mechanism remain challenging. In this study, a series of efficient Cu/L catalysts were prepared for this process, and the intrinsic influencing factors on the reaction routes were systematically revealed. Various techniques revealed that Cu particles in L-supported catalysts exhibited higher dispersion and formed Cu-O(OH)-K interfacial sites. However, with increasing Cu loading, the dispersion of Cu particles and the percentage of Cu-O(OH)-K interfaces decreased. Kinetic investigations revealed that the adsorption configuration and electronic structure of Cu species codetermined the reaction pathways and resulting selectivity. Cu/L catalysts possessing Cu-O(OH)-K interfaces and small particles demonstrated the preferential formation of formate species, promoting methanol formation. However, larger Cu particles generated carboxylate intermediates, resulting in higher CO selectivity..

Thermocatalytic Conversion of CO2 to Valuable Products Activated by Noble-Metal-Free Metal-Organic Frameworks

Thermocatalysis of CO2 into high valuable products is an efficient and green method for mitigating global warming and other environmental problems, of which Noble-metal-free metal-organic frameworks (MOFs) are one of the most promising heterogeneous catalysts for CO2 thermocatalysis, and many excellent researches have been published. Hence, this review focuses on the valuable products obtained from various CO2 conversion reactions catalyzed by noble-metal-free MOFs, such as cyclic carbonates, oxazolidinones, carboxylic acids, N-phenylformamide, methanol, ethanol, and methane. We classified these published references according to the types of products, and analyzed the methods for improving the catalytic efficiency of MOFs in CO2 reaction. The advantages of using noble-metal-free MOF catalysts for CO2 conversion were also discussed along the text. This review concludes with future perspectives on the challenges to be addressed and potential research directions. We believe that this review will be helpful to readers and attract more scientists to join the topic of CO2 conversion.

Zeolite-encaged mononuclear copper centers catalyze CO2 selective hydrogenation to methanol

The selective hydrogenation of CO2 to methanol by renewable hydrogen source represents an attractive route for CO2 recycling and is carbon neutral. Stable catalysts with high activity and methanol selectivity are being vigorously pursued, and current debates on the active site and reaction pathway need to be clarified. Here, we report a design of faujasite-encaged mononuclear Cu centers, namely Cu@FAU, for this challenging reaction. Stable methanol space-time-yield (STY) of 12.8 mmol gcat-1 h-1 and methanol selectivity of 89.5% are simultaneously achieved at a relatively low reaction temperature of 513 K, making Cu@FAU a potential methanol synthesis catalyst from CO2 hydrogenation. With zeolite-encaged mononuclear Cu centers as the destined active sites, the unique reaction pathway of stepwise CO2 hydrogenation over Cu@FAU is illustrated. This work provides a clear example of catalytic reaction with explicit structure-activity relationship and highlights the power of zeolite catalysis in complex chemical transformations.

Stabilization of transition metal heterojunctions inside porous materials for high-performance catalysis

Transition metal-based heterostructural materials are a class of very promising substitutes for noble metal-based catalysts for high-performance catalysis, due to their inherent internal electric field at the interface in the heterojunctions, which could induce electron relocalization and facilitate charge carrier migration between different metal sites at heterostructural boundaries. However, redox-active metal species suffer from reduction, oxidation, migration, aggregation, leaching and poisoning in catalysis, which results in heavy deterioration of the catalytic properties of transition metal-based heterojunctions and frustrates their practical applications. To improve the stability of transition metal-based heterojunctions and sufficiently expose redox-active sites at the heterosurfaces, many kinds of porous materials have been used as porous hosts for the stabilization of non-precious metal heterojunctions. This review article will discuss recently developed strategies for encapsulation and stabilization of transition metal heterojunctions inside porous materials, and highlight their improved stability and catalytic performance through the spatial confinement effect and synergistic interaction between the heterojunctions and the host matrices.

A novel design of Cu(I) active site on the metal-organic framework for exploring the structural transformation of Fenton-like catalysts through in situ "capturing" OH. J Colloid Interface Sci 2023;648:778-786. [PMID: 37321097 DOI: 10.1016/j.jcis.2023.05.189] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

The mutual transformation of reactive oxygen species may affect the structural transformation of catalysts during the Fenton-like processes. Its in-depth understanding is essential to achieve high catalytic activity and stability. In this study, a novel design of Cu(I) active sites based on the metal-organic framework (MOF) is proposed to "capture" OH^- produced via Fenton-like processes and re-coordinate the oxidized Cu sites. The Cu(I)-MOF presents an excellent removal efficiency for sulfamethoxazole (SMX), with a high removal kinetic constant of 7.146 min^-1. Combing DFT calculations with experimental observations, we have revealed that the Cu of Cu(I)-MOF exhibits a lower d-band center, enabling efficient activation of H₂O₂ and spontaneous "capturing" of OH^- to form Cu-MOF, which can be reorganized into the Cu(I)-MOF through molecular regulation for recycle. This research demonstrates a promising Fenton-like approach for solving the trade-off between catalytic activity and stability and provides new insights into the design and synthesis of efficient MOF-based catalysts for water treatment.

Nanoreactor Engineering Can Unlock New Possibilities for CO2 Tandem Catalytic Conversion to C-C Coupled Products

Climate change is becoming increasingly more pronounced every day while the amount of greenhouse gases in the atmosphere continues to rise. CO2 reduction to valuable chemicals is an approach that has gathered substantial attention as a means to recycle these gases. Herein, some of the tandem catalysis approaches that can be used to achieve the transformation of CO2 to C-C coupled products are explored, focusing especially on tandem catalytic schemes where there is a big opportunity to improve performance by designing effective catalytic nanoreactors. Recent reviews have highlighted the technical challenges and opportunities for advancing tandem catalysis, especially highlighting the need for elucidating structure-activity relationships and mechanisms of reaction through theoretical and in situ/operando characterization techniques. In this review, the focus is on nanoreactor synthesis strategies as a critical research direction, and discusses these in the context of two main tandem pathways (CO-mediated pathway and Methanol-mediated pathway) to C-C coupled products.

Constructing carbon supported copper-based catalysts for efficient CO2 hydrogenation to methanol

An activated carbon-supported Cu/ZnO catalyst (CCZ-AE-ox) was successfully obtained by the ammonia evaporation method for the hydrogenation of carbon dioxide to methanol, and the surface properties of the catalyst post-calcination and reduction were investigated. Activated carbon facilitated the increased dispersion of the loaded metals, which promote the CO₂ space-time yield (STY) of methanol and turnover frequency (TOF) on the active sites. Furthermore, the factors affecting the catalyst in the hydrogenation of CO₂ to methanol were in-depth investigated. The larger surface area and higher CO₂ adsorption capacity are found to make possible the main attributions of the superior activity of the CCZ-AE-ox catalyst.

Why can poorly conductive Bi@UiO-MOF catalyze CO2 electroreduction?

Metal NP @ metal-organic frameworks (MOFs) are widely used in electrocatalysis. However, many of the MOFs are poorly conductive. Here, we loaded bismuth (Bi) into a Zr-based MOF of the UiO structure that is active for CO₂ reduction to formate and found that a moderate conductivity of the nanosized MOFs is sufficient to support a reasonably high catalytic current density. This finding allows simpler catalyst design and quantitative rationalization of MOF electrocatalysis.

An electroactive metal-organic framework-based novel on-off ratiometric electrochemical platform for effective detection of lead ions

Metal-organic framework (MOF) materials exhibit unique advantages in adsorption, pre-enrichment and selective recognition of heavy metal ions due to their porous nature, tunable structure and ease of functionalization. However, due to the poor conductivity and electrochemical activity of most MOFs, their application in electrochemical sensing is limited. In this paper, an electroactive hybrid material rGO/UiO-bpy composed of UiO-bpy and electrochemically reduced graphene oxide (rGO) was prepared and has been successfully used in the electrochemical determination of lead ions (Pb²⁺). Interestingly, a reverse response relationship between the electrochemical signal of UiO-bpy and the concentration of Pb²⁺ was discovered in the experiment, which can be used to develop a novel on-off ratiometric sensing strategy for Pb²⁺ detection. To our knowledge, this is the first time that UiO-bpy has been used as both an improved electrode material for heavy metal ion detection and an internal reference probe for ratiometric analysis. This study is of great significance to expand the electrochemical application of UiO-bpy and develop innovative electrochemical ratiometric sensing strategies for Pb²⁺ determination.

Target Recognition-Triggered Peroxidase-Mimicking Activity Depression in Homochiral Nanochannels for Identifying Cystine Enantiomers

Enantioselective identification of chiral molecules is of paramount importance in medical science, biochemistry, and pharmaceutics owing to the configuration-dependent activities of enantiomers. However, the identical physicochemical properties of enantiomers remain challenging in chiral sensing. In this study, inspired by the peroxidase-mimicking activity of Fe(III)-based nanomaterials, an enantioselective artificial architecture is constructed on TiO₂ nanochannels. Homochiral Ti-based metal-organic frameworks (MOFs) use a 2,2'-bipyridine-5,5'-dicarboxylic acid ligand as the artificial enzyme skeleton, Fe(III) as peroxidase-mimicking centers, and l-tartaric acid (TA) as a chiral recognition selector. Using l-/d-cystine as model enantiomers, the chiral moieties of l-TA on Ti-MOFs allow stereoselective recognition of guest molecules through hydrogen bonds formed between chiral cystine and the host. In a tris(2-carboxyethyl)phosphine hydrochloride-containing environment, the disulfide bonds in cystine molecules are further cleaved, and the HS-tails react with Fe(III) active sites, causing the loss of peroxidase-like performance of nanochannels. Benefitting from the nanochannel architecture's current-potential (I-V) properties, the selective recognition of cystine enantiomers is directly monitored through the peroxidase-like activity change-induced ionic current signatures. This study provides a new and universal strategy for distinguishing disulfide- and thiol-containing chiral molecules.

Metal-Organic Frameworks for Greenhouse Gas Applications

Using petrol to supply energy for a car or burning coal to heat a building generates plenty of greenhouse gas (GHG) emissions, including carbon dioxide (CO₂ ), water vapor (H₂ O), methane (CH₄ ), nitrous oxide (N₂ O), ozone (O₃ ), fluorinated gases. These up-and-coming metal-organic frameworks (MOFs) are structurally endowed with rigid inorganic nodes and versatile organic linkers, which have been extensively used in the GHG-related applications to improve the lives and protect the environment. Porous MOF materials and their derivatives have been demonstrated to be competitive and promising candidates for GHG separation, storage and conversions as they shows facile preparation, large porosity, adjustable nanostructure, abundant topology, and tunable physicochemical property. Enormous progress has been made in GHG storage and separation intrinsically stemmed from the different interaction between guest molecule and host framework from MOF itself in the recent five years. Meanwhile, the use of porous MOF materials to transform GHG and the influence of external conditions on the adsorption performance of MOFs for GHG are also enclosed. In this review, it is also highlighted that the existing challenges and future directions are discussed and envisioned in the rational design, facile synthesis and comprehensive utilization of MOFs and their derivatives for practical applications.

Photo-Induced Switching of CO2 Hydrogenation Pathway towards CH3 OH Production over Pt@UiO-66-NH2 (Co)

It is highly desired to achieve controllable product selectivity in CO₂ hydrogenation. Herein, we report light-induced switching of reaction pathways of CO₂ hydrogenation towards CH₃ OH production over actomically dispersed Co decorated Pt@UiO-66-NH₂ . CO, being the main product in the reverse water gas shift (RWGS) pathway under thermocatalysis condition, is switched to CH₃ OH via the formate pathway with the assistance of light irradiation. Impressively, the space-time yield of CH₃ OH in photo-assisted thermocatalysis (1916.3 μmol g_cat ^-1  h^-1 ) is about 7.8 times higher than that without light at 240 °C and 1.5 MPa. Mechanism investigation indicates that upon light irradiation, excited UiO-66-NH₂ can transfer electrons to Pt nanoparticles and Co sites, which can efficiently catalyze the critical elementary steps (i.e., CO₂ -to-*HCOO conversion), thus suppressing the RWGS pathway to achieve a high CH₃ OH selectivity.

Confinement Effects in Well-Defined Metal-Organic Frameworks (MOFs) for Selective CO2 Hydrogenation: A Review

Decarbonization has become an urgent affair to restrain global warming. CO₂ hydrogenation coupled with H₂ derived from water electrolysis is considered a promising route to mitigate the negative impact of carbon emission and also promote the application of hydrogen. It is of great significance to develop catalysts with excellent performance and large-scale implementation. In the past decades, metal-organic frameworks (MOFs) have been widely involved in the rational design of catalysts for CO₂ hydrogenation due to their high surface areas, tunable porosities, well-ordered pore structures, and diversities in metals and functional groups. Confinement effects in MOFs or MOF-derived materials have been reported to promote the stability of CO₂ hydrogenation catalysts, such as molecular complexes of immobilization effect, active sites in size effect, stabilization in the encapsulation effect, and electron transfer and interfacial catalysis in the synergistic effect. This review attempts to summarize the progress of MOF-based CO₂ hydrogenation catalysts up to now, and demonstrate the synthetic strategies, unique features, and enhancement mechanisms compared with traditionally supported catalysts. Great emphasis will be placed on various confinement effects in CO₂ hydrogenation. The challenges and opportunities in precise design, synthesis, and applications of MOF-confined catalysis for CO₂ hydrogenation are also summarized.

Cu/Al2O3 aerogels for high-efficiency and rapid iodide elimination from water

Cu-based functional materials are excellent candidates for the elimination of iodine anions. However, the low utilization rate of Cu and its unsatisfactory adsorption performance limit its large-scale practical applications. This paper proposes a co-gelation method to obtain Cu/Al₂O₃ aerogels with a high specific area (537 m²/g). Cu/Al₂O₃ aerogels have a hierarchical porous structure and contain a high proportion of Cu (20.5 wt%). The high dispersibility of Cu, which is based on an in-situ gel process, provides conditions for the high-efficiency elimination of iodide anions. We conducted adsorption experiments that demonstrated that the fabricated Cu/Al₂O₃ aerogel had an ultrahigh adsorption capacity (407.6 mg/g) and a fast adsorption equilibrium time (0.5 h) for iodide anions. Additionally, the Cu/Al₂O₃ aerogel could selectively capture iodine anions even in the presence of high concentrations of competing ions (NO₃^-, SO₄^2-, and Cl^- at 60 mmol/L). Importantly, the aerogel can operate in a wide pH range of 3-11 without causing secondary pollution. This work demonstrates that low-cost Cu/Al₂O₃ aerogels exhibit great potential for eliminating radioactive iodine anions.

Metal organic frameworks derived functional materials for energy and environment related sustainable applications

With the vigorous development of industrial economy, energy and environmental problems have become the most serious issues affecting people's production and life. Therefore, the demand for clean energy production, effective separation and storage is growing. Metal-organic frameworks (MOFs), as a kind of porous crystalline materials with large surface area and porosity, which is self-assembled by metal ions or clusters and organic ligands through coordination bonds. Thanks to a number of unique characteristics such as adjustable pore environment, homogeneous void structure, abundant active sites, unprecedented chemical composition tunability and functional versatility, it has been widely studied, especially for the clean energy conversion in catalysis. In this review, we focus on the research progress of clean energy in catalysis based on MOFs. Emphasis is placed on MOFs with different structures of compositions and their applications in catalytic for clean energy conversion, such as CO oxidation, CO₂ reduction and H₂ evolution. In addition, the situation of MOFs assisting environmental remediation is also briefly described. Finally, the prospects and challenges of MOFs in clean energy and the remaining issues in this field are presented.

Constructing a metal-free 2D covalent organic framework for visible-light-driven photocatalytic reduction of CO2: a sustainable strategy for atmospheric CO2 utilization

A 2D polyimide-linked covalent organic framework (COF) with band gap energy of 2.2 eV is developed as a stable and efficient porous photocatalyst which shows CO2 reduction to formic acid, formaldehyde and methanol.

The Progress of Metal-Organic Framework for Boosting CO2 Conversion

With the rapid development of modern society, environmental problems, including excessive amounts of CO2 released in the atmosphere, are becoming more and more serious. It is necessary to develop new materials and technologies to reduce pollution. Among them, metal–organic frameworks (MOFs) have shown potential for application in the area of catalysis due to their ultra-high specific surface area, structural versatility, and designability as well as ease of modification and post-synthesis. Herein, we summarize recent research advances by use of MOFs for boosting CO2 conversion. Furthermore, challenges and possible research directions related to further exploration are also discussed.

A Comprehensive Review on Graphitic Carbon Nitride for Carbon Dioxide Photoreduction

Inspired by natural photosynthesis, harnessing the wide range of natural solar energy and utilizing appropriate semiconductor-based catalysts to convert carbon dioxide into beneficial energy species, for example, CO, CH₄ , HCOOH, and CH₃ COH have been shown to be a sustainable and more environmentally friendly approach. Graphitic carbon nitride (g-C₃ N₄ ) has been regarded as a highly effective photocatalyst for the CO₂ reduction reaction, owing to its cost-effectiveness, high thermal and chemical stability, visible light absorption capability, and low toxicity. However, weaker electrical conductivity, fast recombination rate, smaller visible light absorption window, and reduced surface area make this catalytic material unsuitable for commercial photocatalytic applications. Therefore, certain procedures, including elemental doping, structural modulation, functional group adjustment of g-C₃ N₄ , the addition of metal complex motif, and others, may be used to improve its photocatalytic activity towards effective CO₂ reduction. This review has investigated the scientific community's perspectives on synthetic pathways and material optimization approaches used to increase the selectivity and efficiency of the g-C₃ N₄ -based hybrid structures, as well as their benefits and drawbacks on photocatalytic CO₂ reduction. Finally, the review concludes a comparative discussion and presents a promising picture of the future scope of the improvements.

Recent Application of Core-Shell Nanostructured Catalysts for CO2 Thermocatalytic Conversion Processes

Carbon-intensive industries must deem carbon capture, utilization, and storage initiatives to mitigate rising CO2 concentration by 2050. A 45% national reduction in CO2 emissions has been projected by government to realize net zero carbon in 2030. CO2 utilization is the prominent solution to curb not only CO2 but other greenhouse gases, such as methane, on a large scale. For decades, thermocatalytic CO2 conversions into clean fuels and specialty chemicals through catalytic CO2 hydrogenation and CO2 reforming using green hydrogen and pure methane sources have been under scrutiny. However, these processes are still immature for industrial applications because of their thermodynamic and kinetic limitations caused by rapid catalyst deactivation due to fouling, sintering, and poisoning under harsh conditions. Therefore, a key research focus on thermocatalytic CO2 conversion is to develop high-performance and selective catalysts even at low temperatures while suppressing side reactions. Conventional catalysts suffer from a lack of precise structural control, which is detrimental toward selectivity, activity, and stability. Core-shell is a recently emerged nanomaterial that offers confinement effect to preserve multiple functionalities from sintering in CO2 conversions. Substantial progress has been achieved to implement core-shell in direct or indirect thermocatalytic CO2 reactions, such as methanation, methanol synthesis, Fischer-Tropsch synthesis, and dry reforming methane. However, cost-effective and simple synthesis methods and feasible mechanisms on core-shell catalysts remain to be developed. This review provides insights into recent works on core-shell catalysts for thermocatalytic CO2 conversion into syngas and fuels.

Biogas improvement as renewable energy through conversion into methanol: A perspective of new catalysts based on nanomaterials and metal organic frameworks

In recent years, the high cost and availability of energy sources have boosted the implementation of strategies to obtain different types of renewable energy. Among them, methane contained in biogas from anaerobic digestion has gained special relevance, since it also permits the management of a big amount of organic waste and the capture and long-term storage of carbon. However, methane from biogas presents some problems as energy source: 1) it is a gas, so its storage is costly and complex, 2) it is not pure, being carbon dioxide the main by-product of anaerobic digestion (30%–50%), 3) it is explosive with oxygen under some conditions and 4) it has a high global warming potential (27–30 times that of carbon dioxide). Consequently, the conversion of biogas to methanol is as an attractive way to overcome these problems. This process implies the conversion of both methane and carbon dioxide into methanol in one oxidation and one reduction reaction, respectively. In this dual system, the use of effective and selective catalysts for both reactions is a critical issue. In this regard, nanomaterials embedded in metal organic frameworks have been recently tested for both reactions, with very satisfactory results when compared to traditional materials. In this review paper, the recent configurations of catalysts including nanoparticles as active catalysts and metal organic frameworks as support materials are reviewed and discussed. The main challenges for the future development of this technology are also highlighted, that is, its cost in environmental and economic terms for its development at commercial scale.

Towards High CO2 Conversions Using Cu/Zn Catalysts Supported on Aluminum Fumarate Metal-Organic Framework for Methanol Synthesis

Green methanol is a viable alternative for the storage of hydrogen and may be produced from captured anthropogenic sources of carbon dioxide. The latter was hydrogenated over Cu-ZnO catalysts supported on an aluminum fumarate metal-organic framework (AlFum MOF). The catalysts, prepared via slurry phase impregnation, were assessed for thermocatalytic hydrogenation of CO2 to methanol. PXRD, FTIR, and SBET exhibited a decrease in crystallinity of the AlFum MOF support after impregnation with Cu-Zn active sites. SEM, SEM-EDS, and TEM revealed that the morphology of the support is preserved after metal loading, where H2-TPR confirmed the presence of active sites for hydrogen uptake. The catalysts exhibited good activity, with a doubling in Cu and Zn loading over the AlFum MOF, resulting in a 4-fold increase in CO2 conversions from 10.8% to 45.6% and an increase in methanol productivity from 34.4 to 56.5 gMeOH/Kgcat/h. The catalysts exhibited comparatively high CO selectivity and high yields of H2O, thereby favoring the reverse water-gas shift reaction. The selectivity of the catalysts towards methanol was found to be 12.9% and 6.9%. The performance of the catalyst supported on AlFum MOF further highlights the potential use of MOFs as supports in the heterogeneous thermocatalytic conversion of CO2 to value-added products.