Directed Biofabrication of Nanoparticles through Regulating Extracellular Electron Transfer

Engineering bionanoreactor in bacteria for efficient hydrogen production

Hydrogen production through water splitting is a vital strategy for renewable and sustainable clean energy. In this study, we developed an approach integrating nanomaterial engineering and synthetic biology to establish a bionanoreactor system for efficient hydrogen production. The periplasmic space (20 to 30 nm) of an electroactive bacterium, Shewanella oneidensis MR-1, was engineered to serve as a bionanoreactor to enhance the interaction between electrons and protons, catalyzed by hydrogenases for hydrogen generation. To optimize electron transfer, we used the microbially reduced graphene oxide (rGO) to coat the electrode, which improved the electron transfer from the electrode to the cells. Native MtrCAB protein complex on S. oneidensis and self-assembled iron sulfide (FeS) nanoparticles acted in tandem to facilitate electron transfer from an electrode to the periplasm. To enhance proton transport, S. oneidensis MR-1 was engineered to express Gloeobacter rhodopsin (GR) and the light-harvesting antenna canthaxanthin. This led to efficient proton pumping when exposed to light, resulting in a 35.6% increase in the rate of hydrogen production. The overexpression of native [FeFe]-hydrogenase further improved the hydrogen production rate by 56.8%. The bionanoreactor engineered in S. oneidensis MR-1 achieved a hydrogen yield of 80.4 μmol/mg protein/day with a Faraday efficiency of 80% at a potential of -0.75 V. This periplasmic bionanoreactor combines the strengths of both nanomaterial and biological components, providing an efficient approach for microbial electrosynthesis.

Biometabolically Derived Selenium Nanoparticles Armed with Protein Protective Suit toward High-Performance Li-Se Batteries

Selenium (Se) serves as a burgeoning high-energy-density cathode material in lithium-ion batteries. However, the development of Se cathode is strictly limited by low Se utilization and inferior cycling stability arising from intrinsic volume expansion and notorious shuttle effect. Herein, a microbial metabolism strategy is developed to prepare "functional vesicle-like" Se globules via Bacillus subtilis subsp. from selenite in sewage, in which Se nanoparticles are armed with a natural biological protein membrane with rich nitrogen and phosphorus, achieving the eco-efficient conversion of trash into treasure (selenite, SeO3 2- → Selenium, Se). The appealing-design "functional vesicle-like" Se globules are beneficial to accommodate volume changes of Se in electrochemical reactions, confining polyselenides via chemisorption, and enhancing mechanical strength of electrode by associated bacteria debris, realizing comprehensive utilization of microorganism. By conceptualizing "functional vesicle-like" Se globules, rather than artificial Se-host composites, as cathode for lithium-selenium batteries, it exhibits outstanding cycling stability and improved rate performance. This strategy opens the door to design smart electrode materials with unattainable structure that cannot be achieved by traditional approaches, achieving eco-efficient conversion of pollutants into energy-storage nanomaterials, which will be a promising research field for interdisciplinary of energy, biology, and environment.

Dual-mode harvest solar energy for photothermal Cu2-xSe biomineralization and seawater desalination by biotic-abiotic hybrid

Biotic-abiotic hybrid photocatalytic system is an innovative strategy to capture solar energy. Diversifying solar energy conversion products and balancing photoelectron generation and transduction are critical to unravel the potential of hybrid photocatalysis. Here, we harvest solar energy in a dual mode for Cu2-xSe nanoparticles biomineralization and seawater desalination by integrating the merits of Shewanella oneidensis MR-1 and biogenic nanoparticles. Photoelectrons generated by extracellular Se0 nanoparticles power Cu2-xSe synthesis through two pathways that either cross the outer membrane to activate periplasmic Cu(II) reduction or are directly delivered into the extracellular space for Cu(I) evolution. Meanwhile, photoelectrons drive periplasmic Cu(II) reduction by reversing MtrABC complexes in S. oneidensis. Moreover, the unique photothermal feature of the as-prepared Cu2-xSe nanoparticles, the natural hydrophilicity, and the linking properties of bacterium offer a convenient way to tailor photothermal membranes for solar water production. This study provides a paradigm for balancing the source and sink of photoelectrons and diversifying solar energy conversion products in biotic-abiotic hybrid platforms.

Cell-derived nanomaterials for biomedical applications

The ever-growing use of nature-derived materials creates exciting opportunities for novel development in various therapeutic biomedical applications. Living cells, serving as the foundation of nanoarchitectonics, exhibit remarkable capabilities that enable the development of bioinspired and biomimetic systems, which will be explored in this review. To understand the foundation of this development, we first revisited the anatomy of cells to explore the characteristics of the building blocks of life that is relevant. Interestingly, animal cells have amazing capabilities due to the inherent functionalities in each specialized cell type. Notably, the versatility of cell membranes allows red blood cells and neutrophils' membranes to cloak inorganic nanoparticles that would naturally be eliminated by the immune system. This underscores how cell membranes facilitate interactions with the surroundings through recognition, targeting, signalling, exchange, and cargo attachment. The functionality of cell membrane-coated nanoparticles can be tailored and improved by strategically engineering the membrane, selecting from a variety of cell membranes with known distinct inherent properties. On the other hand, plant cells exhibit remarkable capabilities for synthesizing various nanoparticles. They play a role in the synthesis of metal, carbon-based, and polymer nanoparticles, used for applications such as antimicrobials or antioxidants. One of the versatile components in plant cells is found in the photosynthetic system, particularly the thylakoid, and the pigment chlorophyll. While there are challenges in consistently synthesizing these remarkable nanoparticles derived from nature, this exploration begins to unveil the endless possibilities in nanoarchitectonics research.

Biogenic Copper Selenide Nanoparticles for Near-Infrared Photothermal Therapy Application

Near-infrared (NIR) photothermal therapy (PTT) is attractive for cancer treatment but is currently restricted by limited availability and insufficient NIR-II photoactivity of photothermal agents, for which artificial nanomaterials are usually used. Here, we report the first use of biogenic nanomaterials for PTT application. A fine-controlled extracellular biosynthesis of copper selenide nanoparticles (bio-Cu_2-xSe) by Shewanella oneidensis MR-1 was realized. The resulting bio-Cu_2-xSe, with fine sizes (∼35.5 nm) and high product purity, exhibited 76.9% photothermal conversion efficiency under 1064 nm laser irradiation, outperforming almost all the existing counterparts. The protein capping also imparted good biocompatibility to bio-Cu_2-xSe to favor a safe PTT application. The in vivo PTT with injected bio-Cu_2-xSe in mice (without extraction nor further modification) showed 87% tumor ablation without impairing the normal organisms. Our work not only opens a green route to synthesize the NIR-II photothermal nanomaterial but may also lay a basis for the development of bacteria-nanomaterial hybrid therapy technologies.

Selenium-mediated Cr(VI) reduction and SeNPs synthesis accelerated Bacillus cereus SES to remediate Cr contamination

Microbial biotransformation of Cr(VI) is a sustainable approach to reduce Cr(VI) toxicity and remediate Cr(VI) contamination. In this study, Bacillus cereus SES with the capability of reducing both Cr(VI) and Se(IV) was isolated, and the effect of Se supplementation on Cr(VI) reduction by Bacillus cereus SES was investigated. Se(IV) addition enabled 2.6-fold faster Cr(VI) reduction, while B. cereus SES reduced 96.96% Se(IV) and produced more selenium nanoparticles (SeNPs) in the presence of Cr(VI). Co-reduction products of B. cereus SES on Cr(VI) and Se(IV) were SeNPs adsorbed with Cr(III). The relevant mechanisms were further revealed by proteomics. Se(IV) supplementation mediated the synthesis of Cr(VI) reductants and stress-resistant substances, thus enhancing Cr(VI) resistance and promoting Cr(VI) reduction. Meanwhile, high Se(IV) reduction rate was associated with Cr(VI)-induced electron transport processes, and Cr(VI) mediated the up-regulation of flagellar assembly, protein export and ABC transporters pathways to synthesis and export more SeNPs. Furthermore, Se combined with B. cereus SES had the potential to reduce the toxicity of Cr(VI) via reducing the bioavailability of Cr and improving the bioavailability of Se in soil. Results suggested that Se could be an efficient strategy to enhance the remediation of B. cereus SES on Cr contamination.

Recent advances in enrichment, isolation, and bio-electrochemical activity evaluation of exoelectrogenic microorganisms

Exoelectrogenic microorganisms (EEMs) catalyzed the conversion of chemical energy to electrical energy via extracellular electron transfer (EET) mechanisms, which underlay diverse bio-electrochemical systems (BES) applications in clean energy development, environment and health monitoring, wearable/implantable devices powering, and sustainable chemicals production, thereby attracting increasing attentions from academic and industrial communities in the recent decades. However, knowledge of EEMs is still in its infancy as only ~100 EEMs of bacteria, archaea, and eukaryotes have been identified, motivating the screening and capture of new EEMs. This review presents a systematic summarization on EEM screening technologies in terms of enrichment, isolation, and bio-electrochemical activity evaluation. We first generalize the distribution characteristics of known EEMs, which provide a basis for EEM screening. Then, we summarize EET mechanisms and the principles underlying various technological approaches to the enrichment, isolation, and bio-electrochemical activity of EEMs, in which a comprehensive analysis of the applicability, accuracy, and efficiency of each technology is reviewed. Finally, we provide a future perspective on EEM screening and bio-electrochemical activity evaluation by focusing on (i) novel EET mechanisms for developing the next-generation EEM screening technologies, and (ii) integration of meta-omics approaches and bioinformatics analyses to explore nonculturable EEMs. This review promotes the development of advanced technologies to capture new EEMs.

Direct Visualization and Restoration of Metallic Ion-Induced Subcellular Ultrastructural Remodeling

Analysis of cellular ultrastructure dynamics and metal ions' fate can provide insights into the interaction between living organisms and metal ions. Here, we directly visualize the distribution of biogenic metallic aggregates, ion-induced subcellular reorganization, and the corresponding regulation effect in yeast by the near-native 3D imaging approach, cryo-soft X-ray tomography (cryo-SXT). By comparative 3D morphometric assessment, we observe the gold ions disrupting cellular organelle homeostasis, resulting in noticeable distortion and folding of vacuoles, apparent fragmentation of mitochondria, extreme swelling of lipid droplets, and formation of vesicles. The reconstructed 3D architecture of treated yeast demonstrates ∼65% of Au-rich sites in the periplasm, a comprehensive quantitative assessment unobtained by TEM. We also observe some AuNPs in rarely identified subcellular sites, namely, mitochondria and vesicles. Interestingly, the amount of gold deposition is positively correlated with the volume of lipid droplets. Shifting the external starting pH to near-neutral results in the reversion of changes in organelle architectures, boosting the amount of biogenic Au nanoparticles, and increasing cell viability. This study provides a strategy to analyze the metal ions-living organism interaction from subcellular architecture and spatial localization perspectives.

Enhanced transmembrane electron transfer in Shewanella oneidensis MR-1 using gold nanoparticles for high-performance microbial fuel cells

Low efficiency of extracellular electron transfer (EET) is a major bottleneck in developing high-performance microbial fuel cells (MFCs). Herein, we construct Shewanella oneidensis MR-1@Au for the bioanode of MFCs. Through performance recovery experiments of mutants, we proved that abundant Au nanoparticles not only tightly covered the bacteria surface, but were also distributed in the periplasm and cytoplasm, and even embedded in the outer and inner membranes of the cell. These Au nanoparticles could act as electron conduits to enable highly efficient electron transfer between S. oneidensis MR-1 and electrodes. Strikingly, the maximum power density of the S. oneidensis MR-1@Au bioanode reached up to 3749 mW m^-2, which was 17.4 times higher than that with the native bacteria, reaching the highest performance yet reported in MFCs using Au or Au-based nanocomposites as the anode. This work elucidates the role of Au nanoparticles in promoting transmembrane and extracellular electron transfer from the perspective of molecular biology and electrochemistry, while alleviating bottlenecks in MFC performances.

Reversing Electron Transfer Chain for Light-Driven Hydrogen Production in Biotic-Abiotic Hybrid Systems

The biotic-abiotic photosynthetic system integrating inorganic light absorbers with whole-cell biocatalysts innovates the way for sustainable solar-driven chemical transformation. Fundamentally, the electron transfer at the biotic-abiotic interface, which may induce biological response to photoexcited electron stimuli, plays an essential role in solar energy conversion. Herein, we selected an electro-active bacterium Shewanella oneidensis MR-1 as a model, which constitutes a hybrid photosynthetic system with a self-assembled CdS semiconductor, to demonstrate unique biotic-abiotic interfacial behavior. The photoexcited electrons from CdS nanoparticles can reverse the extracellular electron transfer (EET) chain within S. oneidensis MR-1, realizing the activation of a bacterial catalytic network with light illumination. As compared with bare S. oneidensis MR-1, a significant upregulation of hydrogen yield (711-fold), ATP, and reducing equivalent (NADH/NAD⁺) was achieved in the S. oneidensis MR-1-CdS under visible light. This work sheds light on the fundamental mechanism and provides design guidelines for biotic-abiotic photosynthetic systems.

Defined and unknown roles of conductive nanoparticles for the enhancement of microbial current generation: A review

The ability of various bacteria to make use of solid substrates through extracellular electron transfer (EET) or extracellular electron uptake (EEU) has enabled the development of valuable biotechnologies such as microbial fuel cells (MFCs) and microbial electrosynthesis (MES). It is common practice to use metallic and semiconductive nanoparticles (NPs) for microbial current enhancement. However, the effect of NPs is highly variable between systems, and there is no clear guideline for effectively increasing the current generation. In the present review, the proposed mechanisms for enhancing current production in MFCs and MES are summarized, and the critical factors for NPs to enhance microbial current generation are discussed. Implications for microbially induced iron corrosion, where iron sulfide NPs are proposed to enhance the rate of EEU, photochemically driven MES, and several future research directions to further enhance microbial current generation, are also discussed.

Bacterially Synthesized Tellurium Nanorods for Elimination of Advanced Malignant Tumor by Photothermal Immunotherapy

Probiotic Escherichia coli Nissle 1917 (EcN) are employed as a bioreactor for intracellularly synthesizing tellurium nanorods (TeNRs) providing a biohybrid therapeutic platform (Te@EcN) for the elimination of advanced malignant tumor by photothermal immunotherapy. Te@EcN is found to possess superior photothermal property upon near-infrared irradiation, and can efficiently accumulate and retain in tumors, although EcN loses proliferation ability after the synthesis of TeNRs, thus inducing considerable immunogenic tumor cell death. Under co-stimulation by EcN acting as immunoadjuvants, maturation of dendritic cells and priming of cytotoxic T cells are largely promoted. In addition, Te@EcN can reprogram tumor-associated macrophages to ameliorate the immunosuppressive tumor microenvironment. Thus, tumor metastasis and recurrence can be efficiently suppressed. Most importantly, owing to the non-pathogenicity of probiotic EcN and their non-proliferative characteristics after TeNRs synthesis, Te@EcN is found to be rapidly metabolized and cleared from the normal tissues, showing very slight acute side effects in healthy mice even at a relatively high administration dose. Therefore, the proposed combined therapeutic strategy based on bacteria-synthesized TeNRs may find great potential in improving bacteria-mediated tumor therapy with increased antitumor efficacy and reduced toxicity.

Reduction and removal of Cr(VI) in water using biosynthesized palladium nanoparticles loaded Shewanella oneidensis MR-1

In materials science, "green" synthesis has gotten a lot of interest as a reliable, long-lasting, and ecofriendly way to make a variety of materials/nanomaterials, including metal/metal oxide nanomaterials. To accommodate various biological materials, green synthesis of metallic nanoparticles has been used (e.g., bacteria, fungi, algae, and plant extracts). In this work, Shewanella oneidensis MR-1 was used to biosynthesize palladium nanoparticles (bioPd) under aerobic conditions for the Cr(VI) bio-reduction. The size and distribution of bio-Pd are controlled by adjusting the ratio of microbial biomass and palladium precursors. The high cell: Pd ratio has the smallest average particle size of 6.33 ± 1.69 nm. And it has the lowest electrocatalytic potential (-0.132 V) for the oxidation of formic acid, which is 0.158 V lower than commercial Pd/C (5%). Our results revealed that the small size and uniformly distributed extracellular bio-Pd could achieve completely catalytic reduction of 200 mg/L Cr(VI) solution within 10 min, while the commercial Pd/C (5%) need at least 45 min. The bio-Pd materials maintain a high reduction during five cycles. Microorganisms play an important role in the whole process, which can fully disperse palladium nanoparticles, completely reduce Cr(VI), and effectively adsorb Cr(III). This work expands our understanding and provides a reference for the design and development of efficient and green bio-Pd catalysts for environmental pollution control under simple and mild conditions.

Regulating the synthesis rate and yield of bio-assembled FeS nanoparticles for efficient cancer therapy

Biosynthesis has gained growing interest due to its energy efficiency and environmentally benign nature. Recently, biogenic iron sulfide nanoparticles (FeS NPs) have exhibited excellent performance in environmental remediation and energy recovery applications. However, their biosynthesis regulation strategy and application prospects in the biomedical field remain to be explored. Herein, biogenic FeS NPs are controllably synthesized by Shewanella oneidensis MR-1 and applied for cancer therapy. Tuning the synthesis rate and yield of biogenic FeS NPs is realized by altering the initial iron precursor dosage. Notably, increasing the precursor concentration decreases and delays FeS NP biosynthesis. The biogenic FeS NPs (30 nm) are homogeneously anchored on the cell surface of S. oneidensis MR-1. Moreover, the good hydrophilic nature and outstanding Fenton properties of the as-prepared FeS NPs endow them with good cancer therapy performance. The intracellular location of the FeS NPs taken up is visualized with a soft X-ray microscope (SXM). Highly efficient cancer cell killing can be achieved at extremely low concentrations (<12 μg mL^-1), lower than those in reported works. Such good performance is attributed to the Fe²⁺ release, elevated ROS, reduced glutathione (GSH) consumption, and lipid hydroperoxide (LPO) generation. The resulting FeS NPs show excellent in vivo therapeutic performance. This work provides a facile, eco-friendly, and scalable approach to produce nanomedicine, demonstrating the potential of biogenic nanoparticles for use in cancer therapy.

Customized materials-assisted microorganisms in tumor therapeutics

Microorganisms have been extensively applied as active biotherapeutic agents or drug delivery vehicles for antitumor treatment because of their unparalleled bio-functionalities. Taking advantage of the living attributes of microorganisms, a new avenue has been opened in anticancer research. The integration of customized functional materials with living microorganisms has demonstrated unprecedented potential in solving existing questions and even conferring microorganisms with updated antitumor abilities and has also provided an innovative train of thought for enhancing the efficacy of microorganism-based tumor therapy. In this review, we have summarized the emerging development of customized materials-assisted microorganisms (MAMO) (including bacteria, viruses, fungi, microalgae, as well as their components) in tumor therapeutics with an emphasis on the rational utilization of chosen microorganisms and tailored materials, the ingenious design of biohybrid systems, and the efficacious antitumor mechanisms. The future perspectives and challenges in this field are also discussed.

Self-regenerable bio-hybrid with biogenic ferrous sulfide nanoparticles for treating high-concentration chromium-containing wastewater

Biogenic ferrous sulfide nanoparticles (bio-FeS) as low-cost and green-synthesized nanomaterial are promising for heavy metals removal, but the need for complicated extraction, storage processes and the production of iron sludge still restrict their practical application. Here, a self-regenerable bio-hybrid consisting of bacterial cells and self-assembled bio-FeS was developed to efficiently remove chromium (Cr(VI)). A dense layer of bio-FeS was distributed on the cell surface and in the periplasmic space of Shewanella oneidensis MR-1, endowing the bacterium with good Cr(VI) tolerance and unusual activity for bio-FeS-mediated Cr(VI) reduction. An artificial transmembrane electron channel was constituted by the bio-FeS to facilitate extracellular electron pumping, enabling efficient regeneration of extracellular bio-FeS for continuous Cr(VI) reduction. The bio-hybrid maintained high activity within three consecutive treatment-regeneration cycles for treating both simulated Cr(VI)-containing wastewater (50 mg/L) and real electroplating wastewater. Importantly, its activity can be facilely and fully restored through bio-FeS re-synthesis or regeneration with replenished fresh bacteria. Overall, the bio-hybrid merges the self-regeneration ability of bacteria with high activity of bio-FeS , opening a promising new avenue for sustainable treatment of heavy metal- containing wastewater.

The interaction between selenium and cadmium in the soil-rice-human continuum in an area with high geological background of selenium and cadmium

Natural selenium (Se)-rich areas in China are generally characterized by high geological background of cadmium (Cd). However, the interaction between Se and Cd in the soil-rice-human continuum in such areas remains elusive. The concentrations, bioaccessibilities, and biomarkers of Se and Cd in a typical Se-Cd rich area were determined through chemical analysis, in vitro digestion model and cross-sectional study, respectively. The results showed that the molar ratio of available Se/Cd in the soil was averaged at 0.55 and soil Se did not reduce Cd accumulation and transportation in rice. Se bioaccessibility increased from the gastric phase to the intestinal phase, but the opposite was the case for Cd bioaccessibility. Moreover, bioaccessible concentration of Cd was positively correlated to corresponding total concentration in rice but negatively associated with the logarithm of molar ratio of Se/Cd. The risk of Cd-induced nephrotoxicity for the exposure group was not higher than the reference group, which could be ascribed to the mitigative effect of Se. Males and elders were at higher risk of Cd-induced injury owing to higher urinary Cd (U-Cd) and β2-microglobulin (U-β2-MG), and lower urinary Se (U-Se). Our results suggested that Cd-induced health risk should be assessed from a soil-rice-human perspective and the interaction between Se and Cd should be taken into account.

Artificial-regulated synthesis of nanocrystals in live cells

Live cells, as reservoirs of biochemical reactions, can serve as amazing integrated chemical plants where precursor formation, nucleation and growth of nanocrystals, and functional assembly can be carried out accurately following an artificial program. It is crucial but challenging to deliberately direct intracellular pathways to synthesize desired nanocrystals that cannot be produced naturally in cells, because the relevant reactions exist in different spatiotemporal dimensions and will never encounter spontaneously. This article summarizes progress in the introduction of inorganic functional nanocrystals into live cells via the ‘artificial-regulated space–time-coupled live-cell synthesis’ strategy. We also describe ingenious bio-applications of the nanocrystal–cell systems, and quasi-biosynthesis strategies expanded from live-cell synthesis. Artificial-regulated live-cell synthesis—which involves the interdisciplinary application of biology, chemistry, nanoscience and medicine—will enable researchers to better exploit the unanticipated potentialities of live cells and open up new directions in synthetic biology.

Mixotrophic bacteria for environmental detoxification of contaminated waste and wastewater

Mixotrophic bacteria provide a desirable alternative to the use of classical heterotrophic or chemolithoautotrophic bacteria in environmental technology, particularly under limiting nutrients conditions. Their bi-modal ability of adapting to inorganic or organic carbon feed and sulfur, nitrogen, or even heavy metal stress conditions are attractive features to achieve efficient bacterial activity and favorable operation conditions for the environmental detoxification or remediation of contaminated waste and wastewater. This review provides an overview on the state of the art and summarizes the metabolic traits of the most promising and emerging non-model mixotrophic bacteria for the environmental detoxification of contaminated wastewater and waste containing excess amounts of limiting nutrients. Although mixotrophic bacteria usually function with low organic carbon sources, the unusual capabilities of mixotrophic electroactive exoelectrogens and electrotrophs in bioelectrochemical systems and in microbial electrosynthesis for accelerating simultaneous metabolism of inorganic or organic C and N, S or heavy metals are reviewed. The identification of the mixotrophic properties of electroactive bacteria and their capability to drive mono- or bidirectional electron transfer processes are highly exciting and promising aspects. These aspects provide an appealing potential for unearthing new mixotrophic exoelectrogens and electrotrophs, and thus inspire the next generation of microbial electrochemical technology and mixotrophic bacterial metabolic engineering. KEY POINTS: • Mixotrophic bacteria efficiently and simultaneously remove C and N, S or heavy metals. • Exoelectrogens and electrotrophs accelerate metabolism of C and N, S or heavy metals. • New mixotrophic exoelectrogens and electrotrophs should be discovered and exploited.

Deciphering Single-Bacterium Adhesion Behavior Modulated by Extracellular Electron Transfer

For bacterial adhesion and biofilm formation, a thorough understanding of the mechanism and effective modulating is lacking due to the complex extracellular electron transfer (EET) at bacteria-surface interfaces. Here, we explore the adhesion behavior of a model electroactive bacteria under various metabolic conditions by an integrated electrochemical single-cell force microscopy system. A nonlinear model between bacterial adhesion force and electric field intensity is established, which provides a theoretical foundation for precise tuning of bacterial adhesion strength by the surface potential and the direction and flux of electron flow. In particular, based on quantitative analyses with equivalent charge distribution modeling and wormlike chain numerical simulations, it is demonstrated that the chain conformation and unfolding events of outer membrane appendages are dominantly impacted by the dynamic bacterial EET processes. This reveals how the anisotropy of bacterial conductive structure can translate into the desired adhesion behavior in different scenarios.

Roles of cation efflux pump in biomineralization of cadmium into quantum dots in Escherichia coli

Cadmium (Cd) is a typical and widely present toxic heavy metals in environments. Biomineralization of Cd ions could alleviate the toxicity and produce valuable products in certain waste streams containing selenite. However, the impact of the intrinsic Cd(II) efflux system on the biotransformation process remains unrevealed. In this work, the significance of the efflux system on Cd biomineralization was evaluated by constructing engineered Escherichia coli strains, including ΔzntA with suppressed Cd(II) efflux system and pYYDT-zntA with strengthened Cd(II) efflux system. Compared to the wild type (WT), 20% more Cd ions were accumulated in ΔzntA and 17% less were observed in pYYDT-zntA in the presence of selenite as determined by inductively coupled plasma atomic emission spectrometer. Through combination with X-ray absorption fine structure analysis, it was discovered that 50% higher production of CdS_xSe_1-x quantum dots (QDs) was achieved in the ΔzntA cells than that in the WT cells. Moreover, the ΔzntA cells exhibited the same viability as the WT cells and the pYYDT-zntA cells because accumulated Cd ions were transformed into biocompatible QDs. In addition, the biosynthesized QDs had a uniform particle size (3.82 ± 0.53 nm) and a long fluorescence lifetime (45.6 ns), which could potentially be utilized for bio-imaging. These results not only elucidate the significance of Cd(II) efflux system in the biotransformation of Cd ions and selenite, but also provide a promising way to recover Cd and Se as valuable products in certain waste streams.

Tumor-targeting inorganic nanomaterials synthesized by living cells

Inorganic nanomaterials (NMs) have shown potential application in tumor-targeting theranostics, owing to their unique physicochemical properties. Some living cells in nature can absorb surrounding ions in the environment and then convert them into nanomaterials after a series of intracellular/extracellular biochemical reactions. Inspired by that, a variety of living cells have been used as biofactories to produce metallic/metallic alloy NMs, metalloid NMs, oxide NMs and chalcogenide NMs, which are usually automatically capped with biomolecules originating from the living cells, benefitting their tumor-targeting applications. In this review, we summarize the biosynthesis of inorganic nanomaterials in different types of living cells including bacteria, fungi, plant cells and animal cells, accompanied by their application in tumor-targeting theranostics. The mechanisms involving inorganic-ion bioreduction and detoxification as well as biomineralization are emphasized. Based on the mechanisms, we describe the size and morphology control of the products via the modulation of precursor ion concentration, pH, temperature, and incubation time, as well as cell metabolism by a genetic engineering strategy. The strengths and weaknesses of these biosynthetic processes are compared in terms of the controllability, scalability and cooperativity during applications. Future research in this area will add to the diversity of available inorganic nanomaterials as well as their quality and biosafety.

Bacterial extracellular electron transfer: a powerful route to the green biosynthesis of inorganic nanomaterials for multifunctional applications

Synthesis of inorganic nanomaterials such as metal nanoparticles (MNPs) using various biological entities as smart nanofactories has emerged as one of the foremost scientific endeavors in recent years. The biosynthesis process is environmentally friendly, cost-effective and easy to be scaled up, and can also bring neat features to products such as high dispersity and biocompatibility. However, the biomanufacturing of inorganic nanomaterials is still at the trial-and-error stage due to the lack of understanding for underlying mechanism. Dissimilatory metal reduction bacteria, especially Shewanella and Geobacter species, possess peculiar extracellular electron transfer (EET) features, through which the bacteria can pump electrons out of their cells to drive extracellular reduction reactions, and have thus exhibited distinct advantages in controllable and tailorable fabrication of inorganic nanomaterials including MNPs and graphene. Our aim is to present a critical review of recent state-of-the-art advances in inorganic biosynthesis methodologies based on bacterial EET using Shewanella and Geobacter species as typical strains. We begin with a brief introduction about bacterial EET mechanism, followed by reviewing key examples from literatures that exemplify the powerful activities of EET-enabled biosynthesis routes towards the production of a series of inorganic nanomaterials and place a special emphasis on rationally tailoring the structures and properties of products through the fine control of EET pathways. The application prospects of biogenic nanomaterials are then highlighted in multiple fields of (bio-) energy conversion, remediation of organic pollutants and toxic metals, and biomedicine. A summary and outlook are given with discussion on challenges of bio-manufacturing with well-defined controllability.

Facile Bioself-Assembled Crystals in Plants Promote Photosynthesis and Salt Stress Resistance

Salty soil is a global problem that has adverse effects on plants. We demonstrate that bioself-assembled molybdenum-sulfur (Mo-S) crystals formed by the foliar application of MoCl₅ and cysteine augment the photosynthesis of plants treated with 200 mM salt for 7 days by promoting Ca²⁺ signal transduction and free radical scavenging. Reductions in glutathione and phytochelatins were attributed to the biosynthesized Mo-S crystals. Plants embedded with the Mo-S crystals and exposed to salty soil exhibited carbon assimilation rates, photosynthesis rates (Fv/Fm), and electron transport rates (ETRs) that were increased by 40%, 63-173%, and 50-78%, respectively, compared with those of plants without Mo-S crystals. Increased compatible osmolyte levels and decreased levels of oxidative damage, stomatal conductance (0.63-0.42 mmol m² s^-1), and transpiration (22.9-15.3 mmol m² s^-1), free radical scavenging, and calcium-dependent protein kinase, and Ca²⁺ signaling pathway activation were evidenced by transcriptomics and metabolomics. The bioself-assembled crystals originating from ions provide a method for protecting plant development under adverse conditions.

Microbiologically-Synthesized Nanoparticles and Their Role in Silencing the Biofilm Signaling Cascade

The emergence of bacterial resistance to antibiotics has led to the search for alternate antimicrobial treatment strategies. Engineered nanoparticles (NPs) for efficient penetration into a living system have become more common in the world of health and hygiene. The use of microbial enzymes/proteins as a potential reducing agent for synthesizing NPs has increased rapidly in comparison to physical and chemical methods. It is a fast, environmentally safe, and cost-effective approach. Among the biogenic sources, fungi and bacteria are preferred not only for their ability to produce a higher titer of reductase enzyme to convert the ionic forms into their nano forms, but also for their convenience in cultivating and regulating the size and morphology of the synthesized NPs, which can effectively reduce the cost for large-scale manufacturing. Effective penetration through exopolysaccharides of a biofilm matrix enables the NPs to inhibit the bacterial growth. Biofilm is the consortia of sessile groups of microbial cells that are able to adhere to biotic and abiotic surfaces with the help extracellular polymeric substances and glycocalyx. These biofilms cause various chronic diseases and lead to biofouling on medical devices and implants. The NPs penetrate the biofilm and affect the quorum-sensing gene cascades and thereby hamper the cell-to-cell communication mechanism, which inhibits biofilm synthesis. This review focuses on the microbial nano-techniques that were used to produce various metallic and non-metallic nanoparticles and their "signal jamming effects" to inhibit biofilm formation. Detailed analysis and discussion is given to their interactions with various types of signal molecules and the genes responsible for the development of biofilm.

Biosynthesized Quantum Dots as Improved Biocompatible Tools for Biomedical Applications

Quantum Dots (QDs), whose diameters are often limited to 10 nm, have been of interest to researchers for their unique optical characteristics, which are attributed to quantum confinement. Following their early application in the electrical industry as light-emitting diode materials, semiconductor nanocrystals have continued to show great potential in clinical diagnosis and biomedical applications. The conventional physical and chemical pathways for QD syntheses typically require harsh conditions and hazardous reagents, and these products encounter non-hydrophilic problems due to organic capping ligands when they enter the physiological environment. The natural reducing abilities of living organisms, especially microbes, are then exploited to prepare QDs from available metal precursors. Low-cost and eco-friendly biosynthesis approaches have the potential for further biomedical applications which benefit from the good biocompatibility of protein-coated QDs. The surface biomass offers many binding sites to modify substances or target ligands, therefore achieving multiple functions through simple and efficient operations. Biosynthetic QDs could function as bioimaging and biolabeling agents because of their luminescence properties similar to those of chemical QDs. In addition, extensive research has been carried out on the antibacterial activity, metal ion detection and bioremediation. As a result, this review details the advanced progress of biomedical applications of biosynthesized QDs and illustrates these principles as clearly as possible.

Developments in the study and applications of bacterial transformations of selenium species

Microbial bio-transformations of the essential trace element selenium are now recognized to occur among a wide variety of microorganisms. These transformations are used to convert this element into its assimilated form of selenocysteine, which is at the active center of a number of key enzymes, and to produce selenium nanoparticles, quantum dots, metal selenides, and methylated selenium species that are indispensable for biotechnological and bioremediation applications. The focus of this review is to present the state-of-the-art of all aspects of the investigations into the bacterial transformations of selenium species, and to consider the characterization and biotechnological uses of these transformations and their products.

Bacterial Template Synthesis of Multifunctional Nanospindles for Glutathione Detection and Enhanced Cancer-Specific Chemo-Chemodynamic Therapy

Biological synthetic methods of nanoparticles have shown great advantages, such as environmental friendliness, low cost, mild reaction conditions, and enhanced biocompatibility and stability of products. Bacteria, as one of the most important living organisms, have been utilized as bioreducing nanofactories to biosynthesize many metal nanoparticles or compounds. Here, inspired by the disinfection process of KMnO₄, we for the first time introduce bacteria as both the template and the reducing agent to construct a novel tumor microenvironment-responsive MnO_x-based nanoplatform for biomedical applications in various aspects. It is found that the bacterium/MnO_x-based nanospindles (EM NSs) can efficiently encapsulate the chemotherapeutic agent doxorubicin (DOX), leading to the fluorescence quenching of the drug. The as-formed DOX-loaded EM NSs (EMD NSs) are proven to be decomposed by glutathione (GSH) and can simultaneously release DOX and Mn²⁺ ions. The former can be utilized for sensitive fluorescence-based GSH sensing with a limit of detection as low as 0.28 μM and selective cancer therapy, while the latter plays important roles in GSH-activated magnetic resonance imaging and chemodynamic therapy. We also demonstrate that these nanospindles can generate oxygen in the presence of endogenous hydrogen peroxide to inhibit P-glycoprotein expression under hypoxia and can achieve excellent tumor eradication and tumor metastasis inhibition performance. Taken together, this work designs a multifunctional bacterially synthesized nanomissile for imaging-guided tumor-specific chemo-chemodynamic combination therapy and will have implications for the design of microorganism-derived smart nanomedicines.

Substrate Metabolism-Driven Assembly of High-Quality CdS xSe1- x Quantum Dots in Escherichia coli: Molecular Mechanisms and Bioimaging Application

Biosynthesis offers opportunities for cost-effective and sustainable production of semiconductor quantum dots (QDs), but is currently restricted by poor controllability on the synthesis process, resulting from limited knowledge on the assembly mechanisms and the lack of effective control strategies. In this work, we provide molecular-level insights into the formation mechanism of biogenic QDs (Bio-QDs) and its connection with the cellular substrate metabolism in Escherichia coli. Strengthening the substrate metabolism for producing more reducing power was found to stimulate the production of several reduced thiol-containing proteins (including glutaredoxin and thioredoxin) that play key roles in Bio-QDs assembly. This effectively diverted the transformation route of the selenium (Se) and cadmium (Cd) metabolic from Cd₃(PO₄)₂ formation to CdS _xSe_{1- x} QDs assembly, yielding fine-sized (2.0 ± 0.4 nm), high-quality Bio-QDs with quantum yield (5.2%) and fluorescence lifetime (99.19 ns) far exceeding the existing counterparts. The underlying mechanisms of Bio-QDs crystallization and development were elucidated by density functional theory calculations and molecular dynamics simulation. The resulting Bio-QDs were successfully used for bioimaging of cancer cells and tumor tissue of mice without extra modification. Our work provides fundamental knowledge on the Bio-QDs assembly mechanisms and proposes an effective, facile regulation strategy, which may inspire advances in controlled synthesis and practical applications of Bio-QDs as well as other bionanomaterials.

The essentialness of glutathione reductase GorA for biosynthesis of Se(0)-nanoparticles and GSH for CdSe quantum dot formation in Pseudomonas stutzeri TS44

Pseudomonas stutzeri TS44 was able to aerobically reduce Se(IV) into SeNPs and transform Se(IV)/Cd(II) mixture into CdSe-QDs. The SeNPs and CdSe-QDs were systematically characterized by surface feature analyses, and the molecular mechanisms of SeNPs and CdSe-QD formation in P. stutzeri TS44 were characterized in detail. In vivo, under 2.5 mmol/L Se(IV) exposure, GorA was essential for catalyzing of Se(IV) reduction rate decreased by 67% when the glutathione reductase gene gorA was disrupted, but it was not decreased in the glutathione synthesis rate-limiting gene gshA mutated strain compared to the wild type. The complemented strains restored the phenotypes. While under low amount of Se(IV) (0.5 mmol/L), GSH played an important role for Se(IV) reduction. In vitro, GorA catalyzed Se(IV) reduction with NADPH as the electron donor (Vmax of 3.947 ± 0.1061 μmol/min/mg protein under pH 7.0 and 28℃). In addition, CdSe-QDs were successfully synthesized by a one-step method in which Se(IV) and Cd(II) were added to bacterial culture simultaneously. GSH rather than GorA is necessary for CdSe-QD formation in vivo and in vitro. In conclusion, the results provide new findings showing that GorA functions as a selenite reductase under high amount Se(IV) and GSH is essential for bacterial CdSe-QD synthesis.

Microorganism Assisted Synthesized Nanoparticles for Catalytic Applications

Metal and metalloid nanoparticles (NPs) have attracted substantial attention from research communities over the past few decades. Traditional methodologies for NP fabrication have also been intensely explored. However, drawbacks such as the use of toxic agents and the high energy consumption involved in chemical and physical processes hinder their further application in various fields. It is well known that some bacteria are capable of binding and concentrating dissolved metal and metalloid ions, thereby detoxifying their environments. Bioinspired fabrication of NPs is environmentally friendly and inexpensive and requires only low energy consumption. Some biosynthesized NPs are usually used as heterogeneous catalysts in environmental remediation and show higher catalytic efficiency because of their enhanced biocompatibility, stability and large specific surface areas. Therefore, bacteria used as nanofactories can provide a novel approach for removing metal or metalloid ions and fabricating materials with unique properties. Even though a wide range of NPs have been biosynthesized, and their synthetic mechanisms have been proposed, some of these mechanisms are not known in detail. This review focuses on the synthesis and catalytic applications of NPs obtained using bacteria. The known mechanisms of bioreduction and prospects in the design of NPs for catalytic applications are also discussed.

Extracellular Electron Transfer by Shewanella oneidensis Controls Palladium Nanoparticle Phenotype

The relative scarcity of well-defined genetic and metabolic linkages to material properties impedes biological production of inorganic materials. The physiology of electroactive bacteria is intimately tied to inorganic transformations, which makes genetically tractable and well-studied electrogens, such as Shewanella oneidensis, attractive hosts for material synthesis. Notably, this species is capable of reducing a variety of transition-metal ions into functional nanoparticles, but exact mechanisms of nanoparticle biosynthesis remain ill-defined. We report two key factors of extracellular electron transfer by S. oneidensis, the outer membrane cytochrome, MtrC, and soluble redox shuttles (flavins), that affect Pd nanoparticle formation. Changes in the expression and availability of these electron transfer components drastically modulated particle synthesis rate and phenotype, including their structure and cellular localization. These relationships may serve as the basis for biologically tailoring Pd nanoparticle catalysts and could potentially be used to direct the biogenesis of other metal nanomaterials.

Microbial electrocatalysis: Redox mediators responsible for extracellular electron transfer

Redox mediator plays an important role in extracellular electron transfer (EET) in many environments wherein microbial electrocatalysis occurs actively. Because of the block of cell envelope and the low difference of redox potential between the intracellular and extracellular surroundings, the proceeding of EET depends mainly on the help of a variety of mediators that function as an electron carrier or bridge. In this Review, we will summarize a wide range of redox mediators and further discuss their functional mechanisms in EET that drives a series of microbial electrocatalytic reactions. Studying these mediators adds to our knowledge of how charge transport and electrochemical reactions occur at the microorganism-electrode interface. This understanding would promote the widespread applications of microbial electrocatalysis in microbial fuel cells, bioremediation, bioelectrosynthesis, biomining, nanomaterial productions, etc. These improved applications will greatly benefit the sustainable development of the environmental-friendly biochemical industries.

Electrochemical and microbial community responses of electrochemically active biofilms to copper ions in bioelectrochemical systems

Heavy metals play an important role in the conductivity of solution, power generation and activity of microorganisms in bioelectrochemical systems (BESs). However, effect of heavy metal on the process of exoelectrogenesis metabolism and extracellular electron transfer of electrochemically active biofilms (EABs) was poorly understood. Herein, we investigated the impact of Cu²⁺ at gradually increasing concentration on the morphological and electrochemical performance and bacterial communities of anodic biofilms in mixed-culture BESs. The voltage output decreased continuously and dropped to zero at 10 mg L^-1, which was attributed to the toxic inhibition that cased anodic biofilm damage and decreased secretion of outer membrane cytochromes. When stopping the introduction of Cu²⁺ to anodic chamber, the maximum voltage production recovered 75.1% of the voltage produced from BES and coulombic efficiency was higher but acetate removal rate was lower than that before Cu²⁺ addition, demonstrating the recovery capability of EABs was higher compared to nonelectroactive bacteria. Moreover, SEM-EDS and XPS suggested that most of Cu²⁺ was adsorbed by the anode electrode and reduced by EABs on anode. Compared to the open-circuit BES, the flow of electrons through a circuit could improve the reduction of copper. Community analysis showed a decrease in Geobacter accompanied by an increase in Stenotrophomonas in response to Cu²⁺ shock in anodic chamber.