Morphogenesis of Metal–Organic Mesocrystals Mediated by Double Hydrophilic Block Copolymers

High-Index Faceted Cu2 O@CuO Mesocrystals Act as Efficient Catalyst for Si Hydrochlorination to Trichlorosilane

Mesocrystals (MCs) with high-index facets may have superior catalytic properties to those with low-index facets and their nanocrystal counterparts. However, synthesizing such mesocrystal materials is still very challenging because of the metastability of MCs and energetic high-index crystal facets. This work reports a successful solvothermal method followed by calcination for synthesizing copper oxide-based MCs possessing a core-shell structure (denoted as Cu2 O@CuO HIMCs). Furthermore, these MCs are predominantly bounded by the high-index facets such as {311} or {312} with a high-density of stepped atoms. When used as catalysts in Si hydrochlorination to produce trichlorosilane (TCS, the primary feedstock of high-purity crystalline Si), Cu2 O@CuO HIMCs exhibit significantly enhanced Si conversion and TCS selectivity compared to those with flat surfaces and their nanostructured counterparts. Theoretical calculations reveal that both the core-shell structure and the high-index surface contribute to the increased electron density of Cu sites in Cu2 O@CuO HIMCs, promoting the adsorption and dissociation of HCl and stabilizing the dissociated Cl* intermediate. This work provides a simple method for synthesizing high-index faceted MCs and offers a feasible strategy to enhance the catalytic performance of MCs.

Nonclassical Crystal Growth of Supramolecular Polymers in Aqueous Medium

A mechanistic understanding of the principles governing the hierarchical organization of supramolecular polymers offers a paradigm for tailoring synthetic molecular architectures at the nano to micrometric scales. Herein, the unconventional crystal growth mechanism of a supramolecular polymer of superbenzene(coronene)-diphenylalanine conjugate (Cr-FFOEt ) is demonstrated. 3D electron diffraction (3D ED), a technique underexplored in supramolecular chemistry, is effectively utilized to gain a molecular-level understanding of the gradual growth of the initially formed poorly crystalline hairy, fibril-like supramolecular polymers into the ribbon-like crystallites. The further evolution of these nanosized flat ribbons into microcrystals by oriented attachment and lateral fusion is probed by time-resolved microscopy and electron diffraction. The gradual morphological and structural changes reveal the nonclassical crystal growth pathway, where the balance of strong and weak intermolecular interactions led to a structure beyond the nanoscale. The role of distinct π-stacking and H-bonding interactions that drive the nonclassical crystallization process of Cr-FFOEt supramolecular polymers is analyzed in comparison to analogous molecules, Py-FFOEt and Cr-FF forming helical and twisted fibers, respectively. Furthermore, the Cr-FFOEt crystals formed through nonclassical crystallization are found to improve the functional properties.

Direct Synthesis of Mixed-Metal Paddle-Wheel Metal-Organic Frameworks with Controlled Metal Ratios under Ambient Conditions

Currently, synthesizing mixed-metal metal-organic frameworks (MM-MOFs) in a single step remains a challenge due to the varying reactivities of different metal cations. This often results in the formation of mixtures of monometallic MOFs or MM-MOFs with nonstoichiometric metal ratios. A promising approach to overcoming this issue is the controlled precursor method, which uses prebuilt polynuclear complexes with structures similar to the secondary building units (SBUs) of the desired MOFs. In this study, we report that metal acetates can serve as natural prebuilt SBUs, enabling the controlled synthesis of MBDs ([M2(BDC)2DABCO]n, M = metal, BDC = 1,4-benzenedicarboxylic acid, DABCO = 1,4-diazabicyclo[2,2,2]octane) under ambient conditions. By exploiting the fact that metal acetates readily form soluble paddle-wheel dimers similar to the SBUs of MBDs, we achieve the direct synthesis of mixed-metal MBDs at room temperature. The metal ratios (Zn, Co, and Ni) in the resulting MBDs are controllable, and the production yields exceed 90%. The use of metal acetates facilitates the fast and uniform nucleation of MBDs, regardless of the metal cations involved. This similarity in nucleation rates leads to the formation of bimetallic and trimetallic MBDs with predefined metal ratios and homogeneous metal distribution while maintaining the quality of the MOFs. Importantly, this strategy offers an efficient pathway for synthesizing mixed metal MBDs using stoichiometric amounts of metal salts without toxic additives, high energy consumption, and complex synthesis steps.

Interfacing metal organic frameworks with polymers or carbon-based materials: from simple to hierarchical porous and nanostructured composites

In the past few years, metal organic frameworks (MOFs) have been assembled with (bio)polymers and a series of carbon-based materials (graphene, graphene oxide, carbon nanotubes, carbon quantum dots, etc.) leading to a wide range of composites differing in their chemical composition, pore structure and functionality. The objective was mainly to overcome the limitations of MOFs in terms of mechanical properties, chemical stability and processability while imparting novel functionality (electron conductivity, (photo)catalytic activity, etc.) and hierarchical porosity. These composites were considered for numerous applications including gas/liquid adsorption and separation, (photo)catalysis, biomedicine, energy storage, conversion and so on. The performance of such composites depends strongly on their microstructural and physico-chemical properties which are mainly driven by the chemical strategies used to design and process such composites. In this perspective article, we propose to cover this topic and provide a useful survey of recent progress in the synthesis and design of MOFs-carbon material composites. This article will describe the development of composites with increasing complexity in terms of porous architecture, spatial structuration and organisation, and functionality.

Understanding and controlling the nucleation and growth of metal-organic frameworks

Metal-organic frameworks offer a diverse landscape of building blocks to design high performance materials for implications in almost every major industry. With this diversity stems complex crystallization mechanisms with various pathways and intermediates. Crystallization studies have been key to the advancement of countless biological and synthetic systems, with MOFs being no exception. This review provides an overview of the current theories and fundamental chemistry used to decipher MOF crystallization. We then discuss how intrinsic and extrinsic synthetic parameters can be used as tools to modulate the crystallization pathway to produce MOF crystals with finely tuned physical and chemical properties. Experimental and computational methods are provided to guide the probing of MOF crystal formation on the molecular and bulk scale. Lastly, we summarize the recent major advances in the field and our outlook on the exciting future of MOF crystallization.

Metal-Organic Frameworks Meet Polymers: From Synthesis Strategies to Healthcare Applications

Metal-organic frameworks (MOFs) have been at the forefront of nanotechnological research for the past decade owing to their high porosity, high surface area, diverse configurations, and controllable chemical structures. They are a rapidly developing class of nanomaterials that are predominantly applied in batteries, supercapacitors, electrocatalysis, photocatalysis, sensors, drug delivery, gas separation, adsorption, and storage. However, the limited functions and unsatisfactory performance of MOFs resulting from their low chemical and mechanical stability hamper further development. Hybridizing MOFs with polymers is an excellent solution to these problems, because polymers-which are soft, flexible, malleable, and processable-can induce unique properties in the hybrids based on those of the two disparate components while retaining their individuality. This review highlights recent advances in the preparation of MOF-polymer nanomaterials. Furthermore, several applications wherein the incorporation of polymers enhances the MOF performance are discussed, such as anticancer therapy, bacterial elimination, imaging, therapeutics, protection from oxidative stress and inflammation, and environmental remediation. Finally, insights from the focus of existing research and design principles for mitigating future challenges are presented.

Interfacial Assembly of Nanowire Arrays toward Carbonaceous Mesoporous Nanorods and Superstructures

Synthesis of anisotropic carbonaceous nano- and micro-materials with well-ordered mesoporous structures has attracted increasing attention for a broad scope of applications. Although hard-templating method has been widely employed, overcoming the viscous forces to prepare anisotropic mesoporous materials is particularly challenging via the universal soft-templating method, especially from sustainable biomass as a carbon resource. Herein, the synthesis of biomass-derived nanowire-arrays based mesoporous nanorods and teeth-like superstructures is reported, through a simple and straightforward polyelectrolyte assisted soft-templating hydrothermal carbonization (HTC) approach. A surface energy induced interfacial assembly mechanism with the synergetic interactions between micelles, nanowire, nanorods, and polyelectrolyte is proposed. The polyelectrolyte acts not only as a stabilizer to decrease the surface energy of cylindrical micelles, nanowires and nanorods, but also as a structure-directing agent to regulate the oriented attachment and anisotropic assembly of micelles, nanowires, and nanorods. After a calcination treatment, the carbon nanorod and teeth-like superstructure are successfully coupled with Ru to directly produce supported catalysts for the hydrogen evolution reaction, exhibiting much better performance than the isotropic nanospheres based catalyst. This HTC approach will open up new avenues for the synthesis of anisotropic materials with various morphologies and dimensions, expanding the palette of materials selection for many applications.

Response to the Temperature and Solvent Stimulation of MOF Material in a Single-Crystal to Single-Crystal Manner

Under solvothermal conditions, a three-dimensional mononuclear crystal AQNU-1, {[Co(H₂L)(DPD)(H₂O)₂]·2DMA}_n (H₂L = 5-(bis(4-carboxybenzyl)amino)isophthalic acid, DPD = 4,4'-(2,5-diethoxy-1,4-phenylene)dipyridine) has been synthesized. The transformations of AQNU-1 to binuclear {[Co₂(L)(DPD)_1.5(H₂O)₃]·DMA·H₂O}_n (AQNU-2) and pentanuclear {[Co₅(L)₂(DPD)₂(OH)₂]·2H₂O}_n (AQNU-3) were realized by double stimulation of temperature and solvent, which were accomplished by single-crystal to single-crystal (SC-SC) reaction.

Graphene-Based Two-Dimensional Mesoporous Materials: Synthesis and Electrochemical Energy Storage Applications

Graphene (G)-based two dimensional (2D) mesoporous materials combine the advantages of G, ultrathin 2D morphology, and mesoporous structures, greatly contributing to the improvement of power and energy densities of energy storage devices. Despite considerable research progress made in the past decade, a complete overview of G-based 2D mesoporous materials has not yet been provided. In this review, we summarize the synthesis strategies for G-based 2D mesoporous materials and their applications in supercapacitors (SCs) and lithium-ion batteries (LIBs). The general aspect of synthesis procedures and underlying mechanisms are discussed in detail. The structural and compositional advantages of G-based 2D mesoporous materials as electrodes for SCs and LIBs are highlighted. We provide our perspective on the opportunities and challenges for development of G-based 2D mesoporous materials. Therefore, we believe that this review will offer fruitful guidance for fabricating G-based 2D mesoporous materials as well as the other types of 2D heterostructures for electrochemical energy storage applications.

Polymer-induced polymorphism in a Zn-based metal organic framework

Several MOF polymorphs exhibit enhanced properties compared to their previously known structures, motivating the development of polymorphic control methods. Here, we study polymorphism in the ZIF-8/ZIF-L system as a function of metal : ligand ratio during synthesis and show a significant shift in the phase transition point towards ZIF-8 with addition of dilute polyethylene oxide during synthesis. Computational results suggest a simple pathway for controlling MOF polymorphism where the choice of polymer can be guided via first-principles simulations.

Monolayer Amorphous Carbon-Bridged Nanosheet Mesocrystal: Facile Preparation, Morphosynthetic Transformation, and Energy Storage Applications

Self-assembly of nanoscale building units into mesoscopically ordered superstructures opens the possibility for tailored applications. Nonetheless, the realization of precise controllability related specifically to the atomic scale has been challenging. Here, first, we explore the key role of a molecular surfactant in adjusting the growth kinetics of two-dimensional (2D) layered SnS₂. Experimentally, we show that high pressure both enhances the adsorption energy of the surfactant sodium dodecylbenzene sulfonate (SDBS) on the SnS₂(001) surface at the initial nucleation stage and induces the subsequent oriented attachment (OA) growth of 2D crystallites with monolayer thickness, leading to the formation of a monolayer amorphous carbon-bridged nanosheet mesocrystal. It is notable that such a nanosheet-coalesced mesocrystal is metastable with a flowerlike morphology and can be turned into a single crystal via crystallographic fusion. Subsequently, direct encapsulation of the mesocrystal via FeCl₃-induced pyrrole monomer self-polymerization generates conformal polypyrrole (PPy) coating, and carbonization of the resulting nanocomposites generates Fe-N-S-co-doped carbons that are embedded with well-dispersed SnS/FeCl₃ quantum sheets; this process skillfully integrated structural phase transformation, pyrolysis graphitization, and self-doping. Interestingly, such an integrated design not only guarantees the flowerlike morphology of the final nanohybrids but also, more importantly, allows the thickness of petalous carbon and the size of the nanoconfined particles to be controlled. Benefiting from the unique structural features, the resultant nanohybrids exhibited the brilliant electrochemical performance while simultaneously acting as a reliable platform for exploring the structure-performance correlation of a Li-ion battery (LIB).

Formation of double-cone-shaped ZnO mesocrystals by addition of ethylene glycol to ZnO dissolved choline chloride–urea deep eutectic solvents and observation of their manners of growth

ZnO mesocrystals were grown in ZnO dissolved CU-DESs with addition of ethylene glycol. Their manner of growth was observed and discussed.

Tumor-Activated and Metal-Organic Framework Assisted Self-Assembly of Organic Photosensitizers

Tumor accumulation and intratumoral singlet oxygen (¹O₂) generation efficiency of photosensitizers (PSs) are two essential factors that determine their photodynamic therapy (PDT) efficacies. How to maximize the PS performance at the tumor site is of great research interest. Herein, we report a metal-organic framework (ZIF-8, ZIF = zeolitic imidazolate framework) assisted in vivo self-assembly nanoplatform, ZIF-8-PMMA-S-S-mPEG, as an effective tool for organic PS payloads to achieve efficient PDT. Using an organic PS with aggregation-induced emission as an example, under intratumoral bioreduction, PS-loaded ZIF-8-PMMA-S-S-mPEG (PS@ZIF-8-PMMA-S-S-mPEG) was self-assembled into large ordered hydrophobic clusters, which greatly enhance tumor retention and accumulation of the PS. Moreover, hydrophobic ZIF-8 assemblies greatly isolate the loaded PSs from water and improve O₂ transport for the PSs to effectively produce ¹O₂ inside tumors under light irradiation. The organic PS is therefore endowed with optimal tumor accumulation and intratumoral ¹O₂ production, demonstrating the effectiveness of the developed self-assembly strategy in PDT application.

Structure of the Polymer Backbones in polyMOF Materials

The molecular connectivity of polymer-metal-organic framework (polyMOF) hybrid materials was investigated using density functional theory calculations and solid-state NMR spectroscopy. The architectural constraints that dictate the formation of polyMOFs were assessed by examining poly(1,4-benzenedicarboxylic acid) (pbdc) polymers in two archetypical MOF lattices (UiO-66 and IRMOF-1). Modeling of the polyMOFs showed that in the IRMOF-1-type lattice, six, seven, and eight methylene (-CH₂-) groups between 1,4-benzenedicarboxylate (terephthalate, bdc^2-) units can be accommodated without significant distortions, while in the UiO-66-type lattice, an optimal spacing of seven methylene groups between bdc^2- units is needed to minimize strain. Solid-state NMR supports these predictions and reveals pronounced spectral differences for the same polymer in the two polyMOF lattices. With seven methylene groups, polyUiO-66-7a shows 7 ± 3% of uncoordinated terephthalate linkers, while these are undetectable (<4%) in the corresponding polyIRMOF-1-7a. In addition, NMR-detected backbone mobility is significantly higher in the polyIRMOF-1-7a than in the corresponding polyUiO-66-7a, again indicative of taut chains in the latter.

A solvent-assisted ligand exchange approach enables metal-organic frameworks with diverse and complex architectures

Unlike inorganic crystals, metal-organic frameworks do not have a well-developed nanostructure library, and establishing their appropriately diverse and complex architectures remains a major challenge. Here, we demonstrate a general route to control metal-organic framework structure by a solvent-assisted ligand exchange approach. Thirteen different types of metal-organic framework structures have been prepared successfully. To demonstrate a proof of concept application, we used the obtained metal-organic framework materials as precursors for synthesizing nanoporous carbons and investigated their electrochemical Na+ storage properties. Due to the unique architecture, the one-dimensional nanoporous carbon derived from double-shelled ZnCo bimetallic zeolitic imidazolate framework nanotubes exhibits high specific capacity as well as superior rate capability and cycling stability. Our study offers an avenue for the controllable preparation of well-designed meta-organic framework structures and their derivatives, which would further broaden the application opportunities of metal-organic framework materials.

Covalent organic framework mesocrystals through dynamic modulator manipulated mesoscale self-assembly of imine macrocycle precursors

Framework crystallization is an unresolved challenge in the chemistry of covalent organic frameworks (COFs) due to the poorly controlled simultaneous polymerization and crystallization processes. Here, we report the first morphogenesis of COF mesocrystals with two-dimensional hexagonal p6m symmetry through the combination of alkyl amine as a dynamic modulator and 2,4,6- triformylresorcinol imine as an asymmetrical building block. The amine modulator depresses the lateral growth of 2D sheets, and the slow kinetics combined with the asymmetrical conformation of 2,4,6-triformylresorcinol imine lead to the formation of transient imine macrocycles, which further undergo mesoscale self-assembly into nanotubular structures. The nanotubular structures tend to join together into rod-like bundles with ordered hexagonal rods, which finally grow into uniform hexagonal COF mesocrystals. The present strategy opens a nonclassical nucleation and crystal growth approach to create COFs with unexplored mesocrystal structures, which further extends the scope of crystalline framework materials and provides a new strategy for crystal morphogenesis.

MOF-Polymer Hybrid Materials: From Simple Composites to Tailored Architectures

Metal-organic frameworks (MOFs) are inherently crystalline, brittle porous solids. Conversely, polymers are flexible, malleable, and processable solids that are used for a broad range of commonly used technologies. The stark differences between the nature of MOFs and polymers has motivated efforts to hybridize crystalline MOFs and flexible polymers to produce composites that retain the desired properties of these disparate materials. Importantly, studies have shown that MOFs can be used to influence polymer structure, and polymers can be used to modulate MOF growth and characteristics. In this Review, we highlight the development and recent advances in the synthesis of MOF-polymer mixed-matrix membranes (MMMs) and applications of these MMMs in gas and liquid separations and purifications, including aqueous applications such as dye removal, toxic heavy metal sequestration, and desalination. Other elegant ways of synthesizing MOF-polymer hybrid materials, such as grafting polymers to and from MOFs, polymerization of polymers within MOFs, using polymers to template MOFs, and the bottom-up synthesis of polyMOFs and polyMOPs are also discussed. This review highlights recent papers in the advancement of MOF-polymer hybrid materials, as well as seminal reports that significantly advanced the field.

Self-assembly of block copolymers towards mesoporous materials for energy storage and conversion systems

This paper reviews the progress in the field of block copolymer-templated mesoporous materials, including synthetic methods, morphological and pore size control and their potential applications in energy storage and conversion devices.

Controlling the morphology of metal–organic frameworks and porous carbon materials: metal oxides as primary architecture-directing agents

We give a comprehensive overview of how the morphology control is an effective and versatile way to control the physicochemical properties of metal oxides that can be transferred to metal–organic frameworks and porous carbon materials.

Micro-Blooming: Hierarchically Porous Nitrogen-Doped Carbon Flowers Derived from Metal-Organic Mesocrystals

Synthesis of 3D flower-like zinc-nitrilotriacetic acid (ZnNTA) mesocrystals and their conformal transformation to hierarchically porous N-doped carbon superstructures is reported. During the solvothermal reaction, 2D nanosheet primary building blocks undergo oriented attachment and mesoscale assembly forming stacked layers. The secondary nucleation and growth preferentially occurs at the edges and defects of the layers, leading to formation of 3D flower-like mesocrystals comprised of interconnected 2D micropetals. By simply varying the pyrolysis temperature (550-1000 °C) and the removal method of in the situ-generated Zn species, nonporous parent mesocrystals are transformed to hierarchically porous carbon flowers with controllable surface area (970-1605 m² g^-1 ), nitrogen content (3.4-14.1 at%), pore volume (0.95-2.19 cm³ g^-1 ), as well as pore diameter and structures. The carbon flowers prepared at 550 °C show high CO₂ /N₂ selectivity due to the high nitrogen content and the large fraction of (ultra)micropores, which can greatly increase the CO₂ affinity. The results show that the physicochemical properties of carbons are highly dependent on the thermal transformation and associated pore formation process, rather than directly inherited from parent precursors. The present strategy demonstrates metal-organic mesocrystals as a facile and versatile means toward 3D hierarchical carbon superstructures that are attractive for a number of potential applications.

Metal-Organic Frameworks in Polymer Science: Polymerization Catalysis, Polymerization Environment, and Hybrid Materials

The development of metal-organic frameworks (MOFs) has had a significant impact on various fields of chemistry and materials science. Naturally, polymer science also exploited this novel type of material for various purposes, which is due to the defined porosity, high surface area, and catalytic activity of MOFs. The present review covers various topics of MOF/polymer research beginning with MOF-based polymerization catalysis. Furthermore, polymerization inside MOF pores as well as polymerization of MOF ligands is described, which have a significant effect on polymer structures. Finally, MOF/polymer hybrid and composite materials are highlighted, encompassing a range of material classes, like bulk materials, membranes, and dispersed materials. In the course of the review, various applications of MOF/polymer combinations are discussed (e.g., adsorption, gas separation, drug delivery, catalysis, organic electronics, and stimuli-responsive materials). Finally, past research is concluded and an outlook toward future development is provided.

Tannic Acid-Mediated Aggregate Stabilization of Poly(N-vinylpyrrolidone)-b-poly(oligo (ethylene glycol) methyl ether methacrylate) Double Hydrophilic Block Copolymers

The self-assembly of block copolymers in aqueous solution is an important field in modern polymer science that has been extended to double hydrophilic block copolymers (DHBC) in recent years. In here, a significant improvement of the self-assembly process of DHBC in aqueous solution by utilizing a linear-brush macromolecular architecture is presented. The improved self-assembly behavior of poly(N-vinylpyrrolidone)-b-poly(oligo(ethylene glycol) methyl ether methacrylate) (PVP-b-P(OEGMA)) and its concentration dependency is investigated via dynamic light scattering (DLS) (apparent hydrodynamic radii ≈ 100-120 nm). Moreover, the DHBC assemblies can be non-covalently crosslinked with tannic acid via hydrogen bonding, which leads to the formation of small aggregates as well (apparent hydrodynamic radius ≈ 15 nm). Non-covalent crosslinking improves the self-assembly and stabilizes the aggregates upon dilution, reducing the concentration dependency of aggregate self-assembly. Additionally, the non-covalent aggregates can be disassembled in basic media. The presence of aggregates was studied via cryogenic scanning electron microscopy (cryo-SEM) and DLS before and after non-covalent crosslinking. Furthermore, analytical ultracentrifugation of the formed aggregate structures was performed, clearly showing the existence of polymer assemblies, particularly after non-covalent crosslinking. In summary, we report on the completely hydrophilic self-assembled structures in solution formed from fully biocompatible building entities in water.

One-step preparation of polyimide-inlaid amine-rich porous organic block copolymer for efficient removal of chlorophenols from aqueous solution

A novel polyimide-inlaid amine-rich porous organic block copolymer (PI-b-ARPOP) was prepared via one-step polymerization by using different molar ratios of melamine (MA)/terephthalaldehyde (TA)/pyromellitic dianhydride (PMDA), at molar ratios of 4/3/1, 4/2/2 and 4/1/3. The copolymer contained both aminal groups belonging to ARPOP and imide groups belonging to PI, and the bonding styles of the monomers and growth orientations of the polymeric chains were diversiform, forming an excellent porous structure. Notably, MA/TA/PMDA (4/2/2) had a surface area and pore volume of 487.27 m²/g and 1.169 cm³/g, respectively. The adsorption performance of the materials towards 2,4-dichlorophenol (2,4-DCP) in ultra-pure water was systematically studied. The pH value of 7 was optimal in aqueous solution. Na⁺ and Cl^- ions did not negatively affect the adsorption process, while humic acid (HA) slightly decreased the capacity. The equilibrium time was 40 sec, and the maximum adsorption capacity reached 282.49 mg/g at 298 K. The removal process was endothermic and spontaneous, and the copolymer could maintain its porous structure and consistent performance after regeneration by treatment with alkali. Moreover, to further assess the practical applicability of the material, the adsorption performance towards 2,4-DCP in river water was also investigated. This paper demonstrated that the PI-b-ARPOP can be an efficient and practical adsorbent to remove chlorophenols from aqueous solution.

Ultrathin metal/covalent-organic framework membranes towards ultimate separation

Metal/covalent-organic framework (MOF/COF) membranes have attracted increasing research interest and have been considered as state-of-the-art platforms applied in various environment- and energy-related separation/transportation processes. To break the trade-off between permeability and selectivity to achieve ultimate separation, recent studies have been oriented towards how to design and exploit ultrathin MOF/COF membranes (i.e. sub-1 μm-thick). Given great advances made in the past five years, it is valuable to timely and systematically summarize the recent development and shed light on the future trend in this multidisciplinary field. In this review, we first present the advanced strategies in fabricating ultrathin defect-free MOF/COF membranes such as in situ growth, contra-diffusion method, layer-by-layer (LBL) assembly, metal-based precursor as the pre-functionalized layer, interface-assisted strategy, and laminated assembly of MOF/COF nanosheets. Then, the recent progress in some emerging applications of ultrathin MOF/COF membranes beyond gas separation is highlighted, including water treatment and seawater desalination, organic solvent nanofiltration, and energy-related separation/transportation (i.e. lithium ion separation and proton conductivity). Finally, some unsolved scientific and technical challenges associated with future perspectives in this field are discussed, inspiring the development of next-generation separation membranes.

Polyacids as Modulators for the Synthesis of UiO-66

Poly(acrylic acid) (PAA) and poly(vinylbenzoic acid) (PBA) were synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization and used as modulators for the synthesis of the metal–organic framework (MOF) UiO-66 (UiO=University of Oslo). Whereas typical syntheses of UiO-66 require large excesses of acid modulators, such as acetic acid or benzoic acid, to achieve controlled particle size and morphology of the resulting MOF particles, the use of polymerized acids allows for narrow particle size distributions at sub-stoichiometric quantities of modulator. We show using scanning electron microscopy and dynamic light scattering techniques that polyacids can act as alternative modulators for the growth of UiO-66.

Block co-polyMOFs: morphology control of polymer-MOF hybrid materials

The hybridization of block copolymers and metal-organic frameworks (MOFs) to create novel materials (block co-polyMOFs, BCPMOFs) with controlled morphologies is reported. In this study, block copolymers containing poly(1,4-benzenedicarboxylic acid, H₂bdc) and morphology directing poly(ethylene glycol) (PEG) or poly(cyclooctadiene) (poly(COD)) blocks were synthesized for the preparation of BCPMOFs. Block copolymer architecture and weight fractions were found to have a significant impact on the resulting morphology, mediated through the assembly of polymer precursors prior to MOF formation, as determined through dynamic light scattering. Simple modification of block copolymer weight fraction allowed for tuning of particle size and morphology with either faceted and spherical features. Modification of polymer block architecture represents a simple and powerful method to direct morphology in highly crystalline polyMOF materials. Furthermore, the BCPMOFs could be prepared from both Zr⁴⁺ and Zn²⁺ MOFs, yielding hybrid materials with appreciable surface areas and tuneable porosities. The resulting Zn²⁺ BCPMOF yielded materials with very narrow size distributions and uniform cubic morphologies. The use of topology in BCPMOFs to direct morphology in block copolymer assemblies may open new methodologies to access complex materials far from thermodynamic equilibrium.

Controlled polymerizations using metal-organic frameworks

This short review focuses on recent developments in polymerization reactions using metal-organic frameworks (MOFs). MOFs are crystalline porous materials that are able to tune their frameworks, enabling their use as promising media for polymerization. The precise design of the MOF structure is key to controlling polymerizations, allowing for the regulation of not only primary but also higher-order structures.

Selective sorting of polymers with different terminal groups using metal-organic frameworks

Separation of high-molecular-weight polymers differing just by one monomeric unit remains a challenging task. Here, we describe a protocol using metal-organic frameworks (MOFs) for the efficient separation and purification of mixtures of polymers that differ only by their terminal groups. In this process, polymer chains are inserted by threading one of their extremities through a series of MOF nanowindows. Selected termini can be adjusted by tuning the MOF structure, and the insertion methodology. Accordingly, MOFs with permanently opened pores allow for the complete separation of poly(ethylene glycol) (PEG) based on steric hindrance of the terminal groups. Excellent separation is achieved, even for high molecular weights (20 kDa). Furthermore, the dynamic character of a flexible MOF is used to separate PEG mixtures with very similar terminal moieties, such as OH, OMe, and OEt, as the slight difference of polarity in these groups significantly changes the pore opening kinetics.

The separation of high molecular weight polymers composed of the same number of monomeric units remains highly challenging. Here, the authors show that efficient separation and purification of mixtures of polymers that differ only by their terminal groups can be achieved through polymer threading in metal-organic framework channels.

Thermoadaptive Supramolecular α-Cyclodextrin Crystallization-Based Hydrogels via Double Hydrophilic Block Copolymer Templating

Supramolecular hydrogels play a prominent role in contemporary research of hydrophilic polymers. Especially, hydrogels based on α-cyclodextrin/poly(ethylene glycol) (α-CD/PEG) complexation and crystal formation are studied frequently. Here, the effect of double hydrophilic block copolymers (DHBCs) on α-CD/PEG hydrogel properties is investigated. Therefore, a novel DHBC, namely poly(N-vinylpyrrolidone)-b-poly(oligo ethylene glycol methacrylate) (PVP-b-POEGMA), was synthesized via a combination of reversible deactivation radical polymerization and modular conjugation methods. In the next step, hydrogel formation was studied after α-CD addition. Interestingly, DHBC-based hydrogels showed a significant response to thermal history. Heating of the gels to different temperatures led to different mechanical properties after cooling to ambient temperature, i.e., gels with mechanical properties similar to the initial gels or weak flowing gels were obtained. Thus, the hydrogels showed thermoadaptive behavior, which might be an interesting property for future applications in sensing.