Highly Luminescent Encapsulated Narrow Bandgap Polymers Based on Diketopyrrolopyrrole

Displacement Assay in a Polythiophene Sensor System Based on Supramacromolecuar Disassembly-Caused Emission Quenching

Exploring new methodologies for simple and on-demand methods of manipulating the emission and sensing ability of fluorescence sensor devices with solid-state emission molecular systems is important for realizing on-site sensing platforms. In this regard, although conjugated polymers (CPs) are some of the best candidates for preparing molecular sensor devices owing to their luminescent and molecular recognition properties, the development of CP-based sensor devices is still in its early stages. In this study, we herein propose a novel strategy for preparing a chemical stimuli-responsive solid-state emission system based on supramacromolecular assembly-induced emission enhancement (SmAIEE). The system was spontaneously developed by mixing only the component polymers (i.e., polythiophene and a transient cross-linking polymer). The proposed strategy can be applied to the facile preparation of molecular sensor devices. The analyte-induced fluorescent response of polythiophene originated from the dynamic displacement of the transient cross-linker in the polythiophene ensemble and the generation of the polythiophene-analyte complex. Our successful demonstration of the spontaneous preparation of the fluorescence sensor system by mixing two component polymers could lead to the development of on-site molecular analyzers including the determination of multiple analytes.

Suppression of Dexter transfer by covalent encapsulation for efficient matrix-free narrowband deep blue hyperfluorescent OLEDs

Hyperfluorescence shows great promise for the next generation of commercially feasible blue organic light-emitting diodes, for which eliminating the Dexter transfer to terminal emitter triplet states is key to efficiency and stability. Current devices rely on high-gap matrices to prevent Dexter transfer, which unfortunately leads to overly complex devices from a fabrication standpoint. Here we introduce a molecular design where ultranarrowband blue emitters are covalently encapsulated by insulating alkylene straps. Organic light-emitting diodes with simple emissive layers consisting of pristine thermally activated delayed fluorescence hosts doped with encapsulated terminal emitters exhibit negligible external quantum efficiency drops compared with non-doped devices, enabling a maximum external quantum efficiency of 21.5%. To explain the high efficiency in the absence of high-gap matrices, we turn to transient absorption spectroscopy. It is directly observed that Dexter transfer from a pristine thermally activated delayed fluorescence sensitizer host can be substantially reduced by an encapsulated terminal emitter, opening the door to highly efficient 'matrix-free' blue hyperfluorescence.

Tröger's Base-Enriched Conjugated Cyclopentannulated Copolymers: Prominent Adsorbents of CO2, H2, and Iodine

Three copolymers with conjugated structures, PTB1-PTB3, were produced utilizing a palladium-catalyzed cyclopentannulation polymerization by reacting a specially designed diethynyl Tröger's base surrogate with different dihalogenated polycondensed aromatic hydrocarbons. Brunauer, Emmet, and Teller nitrogen gas adsorption investigation revealed the surface areas of the copolymers, attaining ∼365 m2 g-1. Gas uptake studies demonstrated a considerable carbon dioxide uptake for PTB2 of 44.41 mg g-1 at 273 K and a promising H2 gas uptake of 3.18 mg g-1 at 77 K. PTB1-PTB3 displayed a sizable iodine adsorption capacity, achieving 4000 mg g-1, and mechanistic investigations demonstrated the prevalence of a pseudo-second-order kinetic model. Recyclability experiments proved the effective regeneration of the copolymers, even after performing several adsorption and desorption tests.

Four Slip-Stacked Arrangements, Three Types of Photophysics: Crystal Structure and Solid-State Fluorescence of 3,6-Diaryl Substituted Furo[3,4-c]furanone Polymorphs and Regioisomers

Six symmetrical 3,6-diaryl (aryl=phenyl, 2-, 3- and 4-tolyl, 2,4- and 3,5-xylyl) substituted furo[3,4-c]furanones (DFF) were synthesized. The computational analysis, based on density functional theory, found eight possible centrosymmetrical slipped π-stack arrangements, formed according to electron repulsion minimization principle, as for previously reported for π-isoelectronic diketopyrrolopyrroles (DPP). One of these slipped stack arrangements was found to form infinite columns in the crystals of a new polymorph of parent phenyl derivative (with centre-to-centre distance CC=6.975 Å), other three types of stacks were found for 3-tolyl (CC=6.153 Å), 4-tolyl (CC=3.849 Å) and 2,4-xylyl (CC=4.856 Å) derivatives by single crystal X-ray diffractometry. All six derivatives show intense solution fluorescence in blue/green region, with a maximum driven entirely by a number and position of methyl substituents on phenyl rings. On the other hand, the solid-state fluorescence from yellow over orange to red is observed only for four derivatives and its presence/absence, spectral position and vibronic structure is driven exclusively by the slips in π-stacks (with interplanar distance always less than 3.5 Å) of almost planar DFF molecules, resulting in J-type emission, H-type excimer-like emission and H-type quenching.

Controlling π-Conjugated Polymer-Acceptor Interactions by Designing Polymers with a Mixture of π-Face Strapped and Nonstrapped Monomers

Controlling π-conjugated polymer-acceptor complex interaction, including the interaction strength and location along the polymer backbone, is central to organic electronics and energy applications. Straps in the strapped π-conjugated polymers mask the π-face of the polymer backbone and hence are useful to control the interactions of the π-face of the polymer backbone with other polymer chains and small molecules compared to the conventional pendant solubilizing chains. Herein, we have synthesized a series of strapped π-conjugated copolymers containing a mixture of strapped and nonstrapped comonomers to control the polymer-acceptor interactions. Simulations confirmed that the acceptor is directed toward the nonstrapped repeat unit. More importantly, strapped copolymers overcome a major drawback of homopolymers and display higher photoinduced photoluminescence (PL) quenching, which is a measure of electron transfer from the polymer to acceptor, compared to that of both the strapped homopolymer and the conventional polymer with pendant solubilizing chains. We have also shown that this strategy applies not only to strapped polymers, but also to the conventional polymers with pendant solubilizing chains. The increase in PL quenching is attributed to the absence of a steric sheath around the comonomers and their random location along the polymer backbone, which enhances the probability of non-neighbor acceptor binding events along the polymer backbone. Thus, by mixing insulated and noninsulated monomers along the polymer backbone, the location of the acceptor along the polymer backbone, polymer-acceptor interaction strength, and the efficiency of photoinduced charge transfer are controllable compared to the homopolymers.

Effects of Molecular Encapsulation on the Photophysical and Charge Transport Properties of a Naphthalene Diimide Bithiophene Copolymer

Engineering the molecular structure of conjugated polymers is key to advancing the field of organic electronics. In this work, we synthesized a molecularly encapsulated version of the naphthalene diimide bithiophene copolymer PNDIT2, which is among the most popular high charge mobility organic semiconductors in n-type field-effect transistors and non-fullerene acceptors in organic photovoltaic blends. The encapsulating macrocycles shield the bithiophene units while leaving the naphthalene diimide units available for intermolecular interactions. With respect to PNDIT2, the encapsulated counterpart displays an increased backbone planarity. Molecular encapsulation prevents preaggregation of the polymer chains in common organic solvents, while it permits π-stacking in the solid state and promotes thin film crystallinity through an intermolecular-lock mechanism. Consequently, n-type semiconducting behavior is retained in field-effect transistors, although charge mobility is lower than in PNDIT2 due to the absence of the fibrillar microstructure that originates from preaggregation in solution. Hence, molecularly encapsulating conjugated polymers represent a promising chemical strategy to tune the molecular interaction in solution and the backbone conformation and to consequently control the nanomorphology of casted films without altering the electronic structure of the core polymer.

New semi-ladder polymers for ambipolar organic light-emitting transistors

Organic light-emitting transistors (OLETs) combine the light-emitting and gate-modulated electrical switching functions in a single device. Over the past two decades, progress has been made in developing new fluorescent semiconductors and device engineering to improve the properties of OLETs. In this paper, we give a brief review of the achievement and disadvantages of the present polymer-based OLETs, while highlighting the recent developments in semi-ladder polymers from our lab for new electroluminescent materials. The special folded molecular structures and unique aggregation states make these polymers suitable for exploration as OLET materials. A short conclusion is provided with a discussion on the challenges and future perspectives in this field.

The Pursuit of Shortwave Infrared-Emitting Nanoparticles with Bright Fluorescence through Molecular Design and Excited-State Engineering of Molecular Aggregates

Shortwave infrared (SWIR) fluorescence detection gradually becomes a pivotal real-time imaging modality, allowing one to elucidate biological complexity in deep tissues with subcellular resolution. The key challenge for the further growth of this imaging modality is the design of new brighter biocompatible fluorescent probes. This review summarizes the recent progress in the development of organic-based nanomaterials with an emphasis on new strategies that extend the fluorescence wavelength from the near-infrared to the SWIR spectral range and amplify the fluorescence brightness. We first introduce the most representative molecular design strategies to obtain near-infrared-SWIR wavelength fluorescence emission from small organic molecules. We then discuss how the formation of nanoparticles based on small organic molecules contributes to the improvement of fluorescence brightness and the shift of fluorescence to SWIR, with a special emphasis on the excited-state engineering of molecular probes in an aggregate state and spatial packing of the molecules in nanoparticles. We build our discussion based on a historical perspective on the photophysics of molecular aggregates. We extend this discussion to nanoparticles made of conjugated polymers and discuss how fluorescence characteristics could be improved by molecular design and chain conformation of the polymer molecules in nanoparticles. We conclude the article with future directions necessary to expand this imaging modality to wider bioimaging applications including single-particle deep tissue imaging. Issues related to the characterization of SWIR fluorophores, including fluorescence quantum yield unification, are also mentioned.

A Theoretical Design of Chiral Molecules through Conformational Lock towards Circularly Polarized Luminescence

Circularly polarized (CP) light has shown great potential in quantum computing, optical communications, and three-dimensional displays. It is still a challenge to produce high-efficiency and high-purity CP light. Herein, we proposed a strategy to design chiral organic small molecules for CP light generation. These kinds of chiral molecules are formed by achiral light-emitting groups and achiral alkyl chains through conformational lock, which indicates that chirality can also be introduced into achiral light-emitting groups through rational molecular design. The chirality of these molecules can be further tuned by changing the length of the alkyl chains connecting the diketopyrrolopyrrole unit. The chiroptical properties of these molecules are confirmed by calculated electronic circular dichroism and chiral emission spectra, and further confirmed in experiments. The strategy developed in this work will greatly enlarge the candidate library of chiral luminescent materials.

Molecular tetrominoes: selective masking of the donor π-face to control the configuration of donor-acceptor complexes

Understanding the doping mechanism in organic semiconductors and generating molecular design rules to control the doping process are crucial for improving the performance of organic electronics. Even though controlling the location and orientation of the dopant along the semiconductor backbone is an important step in the doping mechanism, studies in this direction are scarce as it is a challenging task. To address this, herein, we incorporated π-face masked (strapped) units in 1,4-bis(phenylethynylene)benzene (donor) to control the acceptor (dopant) location along the trimer, donor-acceptor binding strength, and acceptor ionization. Two strapped trimers, PCP and CPC, are synthesized with control over the location of the strapped repeat unit in the trimer. The trimers are complexed with the 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) acceptor in solution. DFT calculations show that DDQ residing on the non-strapped repeat unit (the percentage of this configuration is at least ca. 73%) has the highest binding energy for both PCP and CPC. The percentage of dopant ionization is higher in the case of strapped trimers (PCP and CPC) compared to that of linear control trimers (PLP and LPL) and the completely non-strapped (PPP) trimer. The percentage of dopant ionization increased by 15 and 59% in the case of PCP and CPC respectively compared to that of PPP.

Effect of chemical substitution on the construction of boroxine-based supramolecular crystalline polymers featuring B←N dative bonds

We report the mechanochemical synthesis of five single-crystalline phenylboroxine and 1,4-diazabicyclo[2.2.2]octane (DABCO) ligand-based adducts, directed by boron-nitrogen dative bonds. By tuning the electronic features of the phenylboroxines by chemical modifications...

Precision synthesis of linear oligorotaxanes and polyrotaxanes achieving well-defined positions and numbers of cyclic components on the axle

Interest in macromolecules has increased because of their functional properties, which can be tuned using precise organic synthetic methods. For example, desired functions have been imparted by controlling the nanoscale structures of such macromolecules. In particular, compounds with interlocked structures, including rotaxanes, have attracted attention because of their unique supramolecular structures. In such supramolecular structures, the mobility and freedom of the macrocycles are restricted by an axle and dependent on those of other macrocycles, which imparts unique functions to these threaded structures. Recently, methods for the ultrafine engineering and synthesis, as well as functions, of "defined" rotaxane structures that are not statistically dispersed on the axle (i.e., control over the number and position of cyclic molecules) have been reported. Various synthetic strategies allow access to such well-defined linear oligo- and polyrotaxanes, including [1]rotaxanes and [n]rotaxanes (mostly n > 3). These state-of-the-art synthetic methods have resulted in unique functions of these oligo-and polyrotaxane materials. Herein, we review the effective synthetic protocols and functions of precisely constructed one-dimensional oligomers and polymers bearing defined threaded structures, and discuss the latest reports and trends.

Orienting an Organic Semiconductor into DNA 3D Arrays by Covalent Bonds

A quasi-one-dimensional organic semiconductor, hepta(p-phenylene vinylene) (HPV), was incorporated into a DNA tensegrity triangle motif using a covalent strategy. 3D arrays were self-assembled from an HPV-DNA pseudo-rhombohedron edge by rational design and characterized by X-ray diffraction. Templated by the DNA motif, HPV molecules exist as single-molecule fluorescence emitters at the concentration of 8 mM within the crystal lattice. The anisotropic fluorescence emission from HPV-DNA crystals indicates HPV molecules are well aligned in the macroscopic 3D DNA lattices. Sophisticated nanodevices and functional materials constructed from DNA can be developed from this strategy by addressing functional components with molecular accuracy.

Molecular Encapsulation of Naphthalene Diimide (NDI) Based π-Conjugated Polymers: A Tool for Understanding Photoluminescence

Conjugated polymers are an important class of chromophores for optoelectronic devices. Understanding and controlling their excited state properties, in particular, radiative and non-radiative recombination processes are among the greatest challenges that must be overcome. We report the synthesis and characterization of a molecularly encapsulated naphthalene diimide-based polymer, one of the most successfully used motifs, and explore its structural and optical properties. The molecular encapsulation enables a detailed understanding of the effect of interpolymer interactions. We reveal that the non-encapsulated analogue P(NDI-2OD-T) undergoes aggregation enhanced emission; an effect that is suppressed upon encapsulation due to an increasing π-interchain stacking distance. This suggests that decreasing π-stacking distances may be an attractive method to enhance the radiative properties of conjugated polymers in contrast to the current paradigm where it is viewed as a source of optical quenching.

Free-radical cyclization approach to polyheterocycles containing pyrrole and pyridine rings

A wide range of derivatives with new pyrido[2,1-a]pyrrolo[3,4-c]isoquinoline skeleton was synthesized by free-radical intramolecular cyclization of o-bromophenyl-substituted pyrrolylpyridinium salts using the (TMS)₃SiH/AIBN system. The cyclization provides generally good yields of pyrido[2,1-a]pyrrolo[3,4-c]isoquinoline hydrobromides having no additional radical-sensitive substituents. The free bases can be obtained from the synthesized hydrobromides in quantitative yield by basification at room temperature. The selectivity control of intramolecular arylation was achieved by replacing the halogen: the use of 1-(2-(ortho-bromophenyl)-4-(ortho-iodophenyl)pyrrol-3-yl)pyridinium bromide makes it possible to obtain a monocyclization product, and the bicyclization product from the dibromo derivative. The procedure is also applicable to obtain 3-arylpyrido[2,1-a]pyrrolo[3,2-c]isoquinoline derivatives including 2-unsubstituted skeletons that are inaccessible via Pd-catalyzed cyclization.

New Synthetic Approaches to N-Aryl and π-Expanded Diketopyrrolopyrroles as New Building Blocks for Organic Optoelectronic Materials

Diketopyrrolopyrrole (DPP) as a building block has been intensively investigated for organic semiconductors and light emitting materials. The synthesis of N-aryl DPPs remains challenging. Herein, we firstly report a new easily handled synthetic method toward N-aryl DPPs through H-DPP with diaryliodonium salt in the presence of CuI, which shows broad reaction scope. Sixteen N-aryl DPPs, including phenyl, furan and thiophene as flanking aromatic groups, were synthesized with yields up to 78 %. These N-aryl DPPs are fluorescent in both solutions and solid states, with quantum yields up to 96 % and 40 %, respectively. Moreover, we show that the reaction between H-DPP and diaryliodonium salt can lead to π-expanded DPPs by using Pd(OAc)₂ as catalyst. Nine π-expanded DPPs were obtained in 27-61 % yields. These π-expanded DPPs exhibit good semiconducting properties with hole mobility of 0.71 cm²  V^-1  s^-1 , demonstrating that they are useful building blocks for high performance organic semiconductors.

Synergy between Photoluminescence and Charge Transport Achieved by Finely Tuning Polymeric Backbones for Efficient Light-Emitting Transistor

The lack of design principle for developing high-performance polymer materials displaying strong fluorescence and high ambipolar charge mobilities limited their performance in organic light-emitting transistors (OLETs), electrically pumped organic laser, and other advanced electronic devices. A series of semiladder polymers by copolymerization of weak acceptors (TPTQ or TPTI) and weak donors (fluorene (F) or carbazole (C)) have been developed for luminescent and charge transporting properties. It was found that enhanced planarity, high crystallinity, and a delicate balance in interchain aggregation obtained in the new copolymer, TPTQ-F, contributed to high ambipolar charge mobilities and photoluminescent quantum yield. TPTQ-F showed excellent performance in solution-processed multilayered OLET devices with an external quantum efficiency (EQE) of 5.3%.

An isoxazole strategy for the synthesis of alkyl 5-amino-4-cyano-1H-pyrrole-2-carboxylates - versatile building blocks for assembling pyrrolo-fused heterocycles

A full atom-economical domino method has been developed for the preparation of alkyl 5-amino-4-cyano-1H-pyrrole-2-carboxylates by transannulation of 5-alkoxyisoxazoles with malononitrile under Fe(ii) catalysis. Alkyl 5-amino-4-cyano-1H-pyrrole-2-carboxylates are excellent building blocks for various annulation reactions, leading to new derivatives of 1H-pyrrolo[1,2-a]imidazole and pyrrolo[2,3-d]pyrimidine. The DFT calculations of mechanistic details of alkyl 5-amino-4-cyano-1H-pyrrole-2-carboxylate formation are presented.

Synthesis of fully asymmetric diketopyrrolopyrrole derivatives

Diaryl-diketopyrrolopyrroles (DPP) are a widely studied class of chromophore that possesses unique properties which have been of great interest for use in conjugated polymers and as small molecules in optoelectronic devices. While previously only partially asymmetric DPP derivatives have been reported, here a novel methodology towards fully asymmetric DPP derivatives is demonstrated via the synthesis and condensation of novel alkylated thienyl pyrrolinone esters with aromatic nitriles followed by N-alkylation. Two fully asymmetric DPP structural isomers T-DPP-P and P-DPP-T were synthesised demonstrating the full customizability of the DPP core. A further two fully asymmetric DPP derivatives incorporating an ethylene glycol chain and a furan moiety were also synthesised, demonstrating the scope of this powerful methodology and it's potential to largely broaden the library of available DPP derivatives.

Conjugated microporous polymers using a copper-catalyzed [4 + 2] cyclobenzannulation reaction: promising materials for iodine and dye adsorption

A new design strategy is disclosed to synthesize conjugated microporous polymers using a Cu-catalyzed [4 + 2] cyclobenzannulation reaction. The polymers reveal BET surface areas up to 794 m² g⁻¹ and promising uptake of iodine and methylene blue.

Keep glowing and going: recent progress in diketopyrrolopyrrole synthesis towards organic optoelectronic materials

Recent progress in the syntheses of DPP derivatives is summarized as well as the structure–property relationships of the derivatives, including the syntheses of DPP cores, N-functionalization reactions, and π-extensions on and along the DPP cores.

Suppressing aggregation induced quenching in anthracene based conjugated polymers

We demonstrate an anthracene based conjugated polymer with a solid state PLQY that is effectively unchanged compared to solution measurements, alongside an identical PL 0–0 transition wavelength in solution and thin film.

Excited state dynamics and exciton diffusion in triphenylamine/dicyanovinyl push-pull small molecule for organic optoelectronics

Triphenylamine-based small push–pull molecules have recently attracted substantial research attention due to their unique optoelectronic properties. Here, we investigate the excited state de-excitation dynamics and exciton diffusion in TPA-T-DCV-Ph-F small molecule, having simple chemical structure with asymmetrical architecture and end-capped with electron-withdrawing p-fluorodicyanovinyl group. The excited state lifetime in diluted solutions (0.04 ns in toluene and 0.4 ns in chloroform) are found to be surprisingly shorter compared to the solid state (3 ns in PMMA matrix). Time-dependent density functional theory indicates that this behavior originates from non-radiative relaxation of the excited state through a conical intersection between the ground and singlet excited state potential energy surfaces. Exciton diffusion length of ~ 16 nm in solution processed films was retrieved by employing time-resolved photoluminescence volume quenching measurements with Monte Carlo simulations. As means of investigating the device performance of TPA-T-DCV-Ph-F, we manufactured solution and vacuum processed bulk heterojunction solar cells that yielded efficiencies of ~ 1.5% and ~ 3.7%, respectively. Our findings demonstrate that the short lifetime in solutions does not hinder per se long exciton diffusion length in films thereby granting applications of TPA-T-DCV-Ph-F and similar push–pull molecules in vacuum and solution processable devices.

Tuning the Optical Characteristics of Diketopyrrolopyrrole Molecules in the Solid State by Alkyl Side Chains

The optical properties of two sets of donor-acceptor-donor molecules with terminal bithiophene donor units and a central diketopyrrolopyrrole (DPP) acceptor unit are studied. The two sets differ in the alkyl chains on the DPP, which are either branched at the α-carbon (3-pentyl) (1-4) or linear (n-hexyl) (5-8). Within each set, the molecules differ by the absence or presence of n-hexyl chains on the terminal thiophene rings in the 3', 4', or 5' positions. While in solution, the optical spectra differ only subtly; they differ dramatically in the solid state. In contrast to 5-8, 1-4 are nonplanar as a consequence of the sterically demanding 3-pentyl groups, which inhibit π-stacking of the DPP units. Using the crystal structures of 2 (brick layer stacking) and 6 (slipped stacking), we quantitatively explain the solid state absorption spectra. By computing the molecular transition charge density and solving the dispersion relation, the optical absorption of the molecules in the crystal is predicted and in agreement with experiments. For 2, a single resonance frequency is obtained, while for 6 two transitions are seen, with the lower-energy transition being less intense. The results demonstrate how subtle changes in substitution exert large effects in optical properties.

Molecular Sizes and Antibacterial Performance Relationships of Flexible Ionic Liquid Derivatives

Cationic agents, such as ionic liquids (ILs)-based species, have broad-spectrum antibacterial activities. However, the antibacterial mechanisms lack systematic and molecular-level research, especially for Gram-negative bacteria, which have highly organized membrane structures. Here, we designed a series of flexible fluorescent diketopyrrolopyrrole-based ionic liquid derivatives (ILDs) with various molecular sizes (1.95-4.2 nm). The structure-antibacterial activity relationships of the ILDs against Escherichia coli (E. coli) were systematically studied thorough antibacterial tests, fluorescent tracing, morphology analysis, molecular biology, and molecular dynamics (MD) simulations. ILD-6, with a relatively small molecular size, could penetrate through the bacterial membrane, leading to membrane thinning and intracellular activities. ILD-6 showed fast and efficient antimicrobial activity. With the increase of molecular sizes, the corresponding ILDs were proven to intercalate into the bacterial membrane, leading to the destabilization of the lipid bilayer and further contributing to the antimicrobial activities. Moreover, the antibacterial activity of ILD-8 was limited, where the size was not large enough to introduce significant membrane disorder. Relative antibacterial experiments using another common Gram-negative bacteria, Pseudomonas aeruginosa (PAO1), further confirmed the proposed structure-antibacterial activity relationships of ILDs. More impressively, both ILD-6 and ILD-12 displayed significant in vivo therapeutic effects on the PAO1-infected rat model, while ILD-8 performed poorly, which confirmed the antibacterial mechanism of ILDs and proved their potentials for future application. This work clarifies the interactions between molecular sizes of ionic liquid-based species and Gram-negative bacteria and will provide useful guidance for the rational design of high-performance antibacterial agents.

The Effect of α-Branched Side Chains on the Structural and Opto-Electronic Properties of Poly(Diketopyrrolopyrrole-alt-Terthiophene)

Introducing solubilizing α‐branched alkyl chains on a poly(diketopyrrolopyrrole‐alt‐terthiophene) results in a dramatic change of the structural, optical, and electronic properties compared to the isomeric polymer carrying β‐branched alkyl side chains. When branched at the α‐position the alkyl substituent creates a steric hindrance that reduces the tendency of the polymer to π–π stack and endows the material with a much higher solubility in common organic solvents. The wider π–π stacking and reduced tendency to crystallize, evidenced from grazing‐incidence wide‐angle X‐ray scattering, result in a wider optical band gap in the solid state. In solar cells with a fullerene acceptor, the α‐branched isomer affords a higher open‐circuit voltage, but an overall lower power conversion efficiency as a result of a too well‐mixed nanomorphology. Due its reduced π–π stacking, the α‐branched isomer fluoresces and affords near‐infrared light‐emitting diodes emitting at 820 nm.

Synthesis of conjugated polymers via cyclopentannulation reaction: promising materials for iodine adsorption

A new class of conjugated polymers is prepared by means of a versatile palladium-catalyzed cyclopentannulation reaction using a series of specially designed diethynyl aryl synthons with the commercially available 9,10-dibromoanthracene DBA monomer.

Developments of Diketopyrrolopyrrole-Dye-Based Organic Semiconductors for a Wide Range of Applications in Electronics

In recent times, fused aromatic diketopyrrolopyrrole (DPP)-based functional semiconductors have attracted considerable attention in the developing field of organic electronics. Over the past few years, DPP-based semiconductors have demonstrated remarkable improvements in the performance of both organic field-effect transistor (OFET) and organic photovoltaic (OPV) devices due to the favorable features of the DPP unit, such as excellent planarity and better electron-withdrawing ability. Driven by this success, DPP-based materials are now being exploited in various other electronic devices including complementary circuits, memory devices, chemical sensors, photodetectors, perovskite solar cells, organic light-emitting diodes, and more. Recent developments in the use of DPP-based materials for a wide range of electronic devices are summarized, focusing on OFET, OPV, and newly developed devices with a discussion of device performance in terms of molecular engineering. Useful guidance for the design of future DPP-based materials and the exploration of more advanced applications is provided.

Doubly Encapsulated Perylene Diimides: Effect of Molecular Encapsulation on Photophysical Properties

Intermolecular interactions play a fundamental role on the performance of conjugated materials in organic electronic devices, as they heavily influence their optoelectronic properties. Synthetic control over the solid state properties of organic optoelectronic materials is crucial to access real life applications. Perylene diimides (PDIs) are one of the most highly studied classes of organic fluorescent dyes. In the solid state, π-π stacking suppresses their emission, limiting their use in a variety of applications. Here, we report the synthesis of a novel PDI dye that is encapsulated by four alkylene straps. X-ray crystallography indicates that intermolecular π-π stacking is completely suppressed in the crystalline state. This is further validated by the photophysical properties of the dye in both solution and solid state and supported by theoretical calculations. However, we find that the introduction of the encapsulating "arms" results in the creation of charge-transfer states which modify the excited state properties. This article demonstrates that molecular encapsulation can be used as a powerful tool to tune intermolecular interactions and thereby gain an extra level of control over the solid state properties of organic optoelectronic materials.

Manipulating Nonradiative Decay Channel by Intermolecular Charge Transfer for Exceptionally Improved Photothermal Conversion

In-depth studies of nonradiative (NR) decay, seeking to maximize NR decay rate or manipulate other NR decay channels, are of greatest significance for improving the photothermal conversion efficiency (η) of organic materials for phototheranostics; however, to date, relevant work remains scarce. Here, we present an insightful study of NR decay in BODIPY (BDP) dye, in an aggregated state, i.e., in BDP nanoparticles (BDP NPs), which show an efficient additional NR decay channel from the aggregation-stabilized intermolecular charge transfer (CT) state, resulting in exceptionally high η (61%) for highly efficient phototheranostics in vivo. BDP NPs exhibit two ultrafast NR decay channels with ultrashort lifetimes of 1.7 and 50 ps, which is in stark contrast to the only S₁ → S₀ NR channel with a long lifetime of 373 ps in the isolated BDP dye. More importantly, the ultrafast NR channel (1.7 ps) in BDP NPs depletes a substantial portion of the excited-state population (71%), which accounts for its much better photothermal effect as compared with the isolated BDP dye. Finally, BDP NPs display a highly efficient photoacoustic imaging (PAI) guided photothermal therapy (PTT) of tumors in live mice. This study presents a deeper fundamental understanding of NR decay in organic materials, setting a valuable guideline that may be widely applicable to similar molecular structure to develop more advanced organic materials not only for photothermal-related applications.

Protein-like Enwrapped Perylene Bisimide Chromophore as a Bright Microcrystalline Emitter Material

Strongly emissive solid-state materials are mandatory components for many emerging optoelectronic technologies, but fluorescence is often quenched in the solid state owing to strong intermolecular interactions. The design of new organic pigments, which retain their optical properties despite their high tendency to crystallize, could overcome such limitations. Herein, we show a new material with monomer-like absorption and emission profiles as well as fluorescence quantum yields over 90 % in its crystalline solid state. The material was synthesized by attaching two bulky tris(4-tert-butylphenyl)phenoxy substituents at the perylene bisimide bay positions. These substituents direct a packing arrangement with full enwrapping of the chromophore and unidirectional chromophore alignment within the crystal lattice to afford optical properties that resemble those of their natural pigment counterparts, in which chromophores are rigidly embedded in protein environments.

One-Step Construction of Fluorenone-Based Donor-Acceptor-Type Conjugated Polymers via Direct Arylation Polymerization for Cell-Imaging Applications

Direct arylation polymerization (DARP) is a novel approach to obtain conjugated polymers (CPs) through the straightforward C-H activation of monomer building blocks. In this work, a convenient DARP method with high efficiency and excellent regioselectivity is developed to synthesize a series of donor-acceptor (D-A)-type CPs composed of electron-acceptor moiety fluorenones (FOs) and various electron-donor moieties. CPs with different band gaps are obtained in good yields and display large Stokes shifts up to 295 nm. Two ionic CPs, PFOP-NEt3(+) and PFOP-COO(-), were prepared in a polar solvent system to improve the water solubility and biocompatibility using the proposed DARP method. Detailed photophysical studies of these two CPs suggest that both solvation and hydrogen bonds play important roles in determining the polymers' spectroscopic properties. Further studies of the cationic polymer PFOP-NEt3(+) in cell imaging demonstrate its potential application in labeling cell membranes and lysosomes given its low cytotoxicity, excellent photostability, and specific subcellular localization.

Synthesis of 2,5-Dibutyl-3,6-dimethyl-1 H,2 H,4 H,5 H-pyrrolo[3,4- c]pyrrole-1,4-dione: A Diketopyrrolopyrrole Scaffold for the Formation of Alkenyldiketopyrrolopyrrole Compounds

This manuscript describes an unprecedented and efficient synthesis of a new DPP scaffold, 2,5-dibutyl-3,6-dimethyl-1 H,2 H,4 H,5 H-pyrrolo[3,4- c]pyrrole-1,4-dione (DMDPP), containing methyl groups at the 3,6-positions as a precursor to preparing 3,6-divinyl-substituted DPP compounds. Subsequently, following the synthesis of DMDPP, we performed an efficient and mild C-H functionalization of the methyl groups with a variety of aromatic aldehydes to synthesize the first examples of 3,6-divinyl-substituted DPP compounds in moderate to good yields.

Fluorinated dithienyl-diketopyrrolopyrrole: a new building block for organic optoelectronic materials

The synthesis of monofluorinated and difluorinated dithienyl-DPP was reported using a stepwise synthesis method starting from the preparation of pyrrolinone followed by condensation with methyl thiophene-2-carbimidate derivatives.

Polydopamine Dots-Based Fluorescent Nanoswitch Assay for Reversible Recognition of Glutamic Acid and Al3+ in Human Serum and Living Cell

We developed a facile and feasible fluorescent nanoswitch assay for reversible recognition of glutamate (Glu) and Al³⁺ in human serum and living cell. The proposed nanoswitch assay is based on our recently developed method for controlled synthesis of fluorescent polydopamine dots (PDADs) at room temperature with dopamine as the sole precursor. The fluorescence of nanoswitch assay could be quickly and efficiently quenched by Glu (turn-Off), and the addition of Al³⁺ could recover the fluorescence of the PDADs-Glu system (turn-On). Meanwhile, the reversible recognition of Glu and Al³⁺ in this nanoswitch system was stable after three cycles. Additionally, the system displayed excellent performance for Glu and Al³⁺ determination with a low detection limit of 0.12 and 0.2 μM, respectively. Moreover, PDADs are successfully applied to determine Glu and monitor Al³⁺ in human serum. Noteworthy, the nanoswitch assay is transported into HepG2 cells and realized "Off" detection of Glu and "On" sensing Al³⁺ in the living cells. Therefore, this PDADs-based nanoswitch assay provides a strategy to develop reversible recognition biosensors for intracellular and external molecular analysis.