Selective Methane Oxidation to Methanol on Cu-Oxo Dimers Stabilized by Zirconia Nodes of an NU-1000 Metal-Organic Framework

Metal-Organic Framework-Supported Mono Bipyridyl-Iron Hydroxyl Catalyst for Selective Benzene Hydroxylation into Phenol

Direct hydroxylation of benzene to phenol is more appealing in the industry for the economic and environmentally friendly phenol synthesis than the conventional cumene process. We have developed a UiO-metal-organic framework (MOF)-supported mono bipyridyl-Iron(II) hydroxyl catalyst [bpy-UiO-Fe(OH)2] for the selective benzene hydroxylation into phenol using H2O2 as the oxidant. The heterogeneous bpy-UiO-Fe(OH)2 catalyst showed high activity and remarkable phenol selectivity of 99%, giving the phenol mass-specific activity up to 1261 mmolPhOHgFe-1 h-1 at 60 °C. Bpy-UiO-Fe(OH)2 is significantly more active and selective than its homogeneous counterpart, bipyridine-Fe(OH)2. This enhanced catalytic activity of bpy-UiO-Fe(OH)2 over its homogeneous control is attributed to the active site isolation of the bpy-Fe(OH)2 moiety by the solid MOF that prevents intermolecular decomposition. Moreover, the exceptional selectivity of bpy-UiO-Fe(OH)2 in benzene to phenol conversion is originated via shape-selective catalysis, where the confined reaction space within the porous UiO-MOF prevents the formation of larger overoxidized products such as hydroquinone or benzoquinone, leading to the formation of only smaller-sized phenol after monohydroxylation of benzene. Spectroscopic and controlled experiments and theoretical calculations elucidated the reaction pathway, in which the in situ generated •OH radical mediated by bpy-UiO-FeII(OH)2 is the key species for benzene hydroxylation. This work underscores the significance of MOF-supported earth-abundant metal catalysts for sustainable production of fine chemicals.

Metalation of metal-organic frameworks: fundamentals and applications

Metalation of metal-organic frameworks (MOFs) has been developed as a prominent strategy for materials functionalization for pore chemistry modulation and property optimization. By introducing exotic metal ions/complexes/nanoparticles onto/into the parent framework, many metallized MOFs have exhibited significantly improved performance in a wide range of applications. In this review, we focus on the research progress in the metalation of metal-organic frameworks during the last five years, spanning the design principles, synthetic strategies, and potential applications. Based on the crystal engineering principles, a minor change in the MOF composition through metalation would lead to leveraged variation of properties. This review starts from the general strategies established for the incorporation of metal species within MOFs, followed by the design principles to graft the desired functionality while maintaining the porosity of frameworks. Facile metalation has contributed a great number of bespoke materials with excellent performance, and we summarize their applications in gas adsorption and separation, heterogeneous catalysis, detection and sensing, and energy storage and conversion. The underlying mechanisms are also investigated by state-of-the-art techniques and analyzed for gaining insight into the structure-property relationships, which would in turn facilitate the further development of design principles. Finally, the current challenges and opportunities in MOF metalation have been discussed, and the promising future directions for customizing the next-generation advanced materials have been outlined as well.

Heteronuclear Dual Metal Atom Electrocatalysts for Water-Splitting Reactions

Hydrogen is considered a promising substitute for traditional fossil fuels because of its widespread sources, high calorific value of combustion, and zero carbon emissions. Electrocatalytic water-splitting to produce hydrogen is also deemed to be an ideal approach; however, it is a challenge to make highly efficient and low-cost electrocatalysts. Single-atom catalysts (SACs) are considered the most promising candidate to replace traditional noble metal catalysts. Compared with SACs, dual-atom catalysts (DACs) are capable of greater attraction, including higher metal loading, more versatile active sites, and excellent catalytic activity. In this review, several general synthetic strategies and structural characterization methods of DACs are introduced, and recent experimental advances in water-splitting reactions are discussed. The authors hope that this review provides insights and inspiration to researchers regarding DACs in electrocatalytic water-splitting.

Unveiling the Role and Stabilization Mechanism of Cu+ into Defective Ce-MOF Clusters during CO Oxidation

Copper single-site catalysts supported on Zr-based metal-organic frameworks (MOFs) are well-known systems in which the nature of the active sites has been deeply investigated. Conversely, the redox chemistry of the Ce-counterparts is more limited, because of the often-unclear Cu2+/Cu+ and Ce4+/Ce3+ pairs behavior. Herein, we studied a novel Cu2+ single-site catalyst supported on a defective Ce-MOF, Cu/UiO-67(Ce), as a catalyst for the CO oxidation reaction. Based on a combination of in situ DRIFT and operando XAS spectroscopies, we established that Cu+ sites generated during catalysis play a pivotal role. Moreover, the oxygen vacancies associated with Ce3+ sites and presented in the defective Cu/UiO-67(Ce) material are able to activate the O2 molecules, closing the catalytic cycle. The results presented in this work open a new route for the design of active and stable single-site catalysts supported on defective Ce-MOFs.

Anionic oxyl radical formed on CrVI-oxo anchored on the defect site of the UiO-66 node facilitates methane to methanol conversion

The direct conversion of methane to methanol has attracted increasing interest due to abundant and low-cost natural gas resources. Herein, by anchoring Cr-oxo/-oxyhydroxides on UiO-66 metal-organic frameworks, we demonstrate that reactive anionic oxyl radicals can be formed by controlling the coordination environment based on the results of density functional theory calculations. The anionic oxyl radicals produced at the completely oxidized CrVI site acted as the active species for facile methane activation. The thermodynamically stable CrVI-oxo/-oxyhydroxides with the anionic oxyl radicals catalyze the activation of the methane C-H bond through a homolytic mechanism. An analysis of the results showed that the catalytic performance of the active oxyl species correlates with the reaction energy of methane activation and H adsorption energies. Following methanol formation, N2O can regenerate the active sites on the most stable CrVI oxyhydroxides, i.e., the Cr(O)4Hf species. The present study demonstrated that the anionic oxyl radicals formed on the anchored CrVI oxyhydroxides by tuning the coordination environment enabled facile methane activation and facilitated methanol production.

Selective Reduction of Nitro Compounds by Organosilanes Catalyzed by a Zirconium Metal-Organic Framework Supported Salicylaldimine-Cobalt(II) Complex

Reducing nitro compounds to amines is a fundamental reaction in producing valuable chemicals in industry. Herein, the synthesis and characterization of a zirconium metal-organic framework-supported salicylaldimine-cobalt(II) chloride (salim-UiO-CoCl) and its application in catalytic reduction of nitro compounds are reported. Salim-UiO-Co displayed excellent catalytic activity in chemoselective reduction of aromatic and aliphatic nitro compounds to the corresponding amines in the presence of phenylsilane as a reducing agent under mild reaction conditions. Salim-UiO-Co catalyzed nitro reduction had a broad substrate scope with excellent tolerance to diverse functional groups, including easily reducible ones such as aldehyde, keto, nitrile, and alkene. Salim-UiO-Co MOF catalyst could be recycled and reused at least 14 times without noticeable losing activity and selectivity. Density functional theory (DFT) studies along with spectroscopic analysis were employed to get into a comprehensive investigation of the reaction mechanism. This work underscores the significance of MOF-supported single-site base-metal catalysts for the sustainable and cost-effective synthesis of chemical feedstocks and fine chemicals.

Metal-Organic Layers with Photosensitizer and Pyridine Pairs Activate Alkyl Halides for Photocatalytic Heck-Type Coupling with Olefins

Photochemical generation of alkyl radicals from haloalkanes often requires strong energy input from ultraviolet light or a strong photoreductant. Haloalkanes can alternatively be activated with nitrogen-based nucleophiles through a sequential SN2 reaction and single-electron reduction to access alkyl radicals, but these two reaction steps have opposite steric requirements on the nucleophiles. Herein, we report the design of Hf12 metal-organic layers (MOLs) with iridium-based photosensitizer bridging ligands and secondary-building-unit-supported pyridines for photocatalytic alkyl radical generation from haloalkanes. By bringing the photosensitizer and pyridine pairs in proximity, the MOL catalysts allowed facile access to the pyridinium salts from SN2 reactions between haloalkanes and pyridines and at the same time enhanced electron transfer from excited photosensitizers to pyridinium salts to facilitate alkyl radical generation. Consequentially, the MOLs efficiently catalyzed Heck-type cross-coupling reactions between haloalkanes and olefinic substrates to generate functionalized alkenes. The MOLs showed 4.6 times higher catalytic efficiency than the homogeneous counterparts and were recycled and reused without a loss of catalytic activity.

Enhancing CO2 Hydrogenation Using a Heterogeneous Bimetal NiAl-Deposited Metal-Organic Framework NU-1000: Insights from First-Principles Calculations

The hydrogenation of CO2 to high-value-added liquid fuels is crucial for greenhouse gas emission reduction and optimal utilization of carbon resources. Developing supported heterogeneous catalysts is a key strategy in this context, as they offer well-defined active sites for in-depth mechanistic studies and improved catalyst design. Here, we conducted extensive first-principles calculations to systematically explore the reaction mechanisms for CO2 hydrogenation on a heterogeneous bimetal NiAl-deposited metal-organic framework (MOF) NU-1000 and its catalytic performance as atomically dispersed catalysts for CO2 hydrogenation to formic acid (HCOOH), formaldehyde (H2CO), and methanol (CH3OH). The present results reveal that the presence of the NiAl-oxo cluster deposited on NU-1000 efficiently activates H2, and the facile heterolysis of H2 on Ni and adjacent O sites serves as a precursor to the hydrogenation of CO2 into various C1 products HCOOH, H2CO, and CH3OH. Generally, H2 activation is the rate-determining step in the entire CO2 hydrogenation process, the corresponding relatively low free energy barriers range from 14.5 to 15.9 kcal/mol, and the desorption of products on NiAl-deposited NU-1000 is relatively facile. Although the Al atom does not directly participate in the reaction, its presence provides exposed oxygen sites that facilitate the heterolytic cleavage of H2 and the hydrogenation of C1 intermediates, which plays an important role in enhancing the catalytic activity of the Ni site. The present study demonstrates that the catalytic performance of NU-1000 can be finely tuned by depositing heterometal-oxo clusters, and the porous MOF should be an attractive platform for the construction of atomically dispersed catalysts.

Atomic-level design of metalloenzyme-like active pockets in metal-organic frameworks for bioinspired catalysis

Natural metalloenzymes with astonishing reaction activity and specificity underpin essential life transformations. Nevertheless, enzymes only operate under mild conditions to keep sophisticated structures active, limiting their potential applications. Artificial metalloenzymes that recapitulate the catalytic activity of enzymes can not only circumvent the enzymatic fragility but also bring versatile functions into practice. Among them, metal-organic frameworks (MOFs) featuring diverse and site-isolated metal sites and supramolecular structures have emerged as promising candidates for metalloenzymes to move toward unparalleled properties and behaviour of enzymes. In this review, we systematically summarize the significant advances in MOF-based metalloenzyme mimics with a special emphasis on active pocket engineering at the atomic level, including primary catalytic sites and secondary coordination spheres. Then, the deep understanding of catalytic mechanisms and their advanced applications are discussed. Finally, a perspective on this emerging frontier research is provided to advance bioinspired catalysis.

Postsynthetic Modification of the Nonanuclear Node in a Zirconium Metal-Organic Framework for Photocatalytic Oxidation of Hydrocarbons

Heterogeneous catalysis plays an indispensable role in chemical production and energy conversion. Incorporation of transition metals into metal oxides and zeolites is a common strategy to fine-tune the activity and selectivity of the resulting solid catalysts, as either the active center or promotor. Studying the underlying mechanism is however challenging. Decorating the metal-oxo clusters with transition metals in metal-organic frameworks (MOFs) via postsynthetic modification offers a rational approach to construct well-defined structural models for better understanding of the reaction mechanism. Therefore, it is important to expand the materials scope beyond the currently widely studied zirconium MOFs consisting of Zr6 nodes. In this work, we report the design and synthesis of a new (4,12)-connected Zr-MOF with ith topology that consists of rare Zr9 nodes. FeIII was further incorporated onto the Zr9 nodes of the framework, and the resulting MOF material exhibits significantly enhanced activity and selectivity toward the photocatalytic oxidation of toluene. This work demonstrates a delicate ligand design strategy to control the nuclearity of Zr-oxo clusters, which further dictates the number and binding sites of transition metals and the overall photocatalytic activity toward C-H activation. Our work paves the way for future exploration of the structure-activity study of catalysts using MOFs as the model system.

A supported pyridylimine-cobalt catalyst for N-formylation of amines using CO2

N-Formylation of amines with CO2 as a cheap and non-toxic C1-feedstock and hydrosilane reducing agent is a practical and environment friendly method to synthesize formamides. This study describes an efficient and chemoselective mono-N-formylation of amines using CO2 and phenylsilane under mild conditions using a porous metal-organic framework (MOF)-supported single-site cobalt catalyst (pyrim-UiO-Co). The pyrim-UiO-Co MOF has a UiO-topology, and its organic linkers bear a pyridylimine ligated Co catalytic moiety. A wide range of aliphatic and aromatic amines are transformed into desired N-formamides in moderate to excellent yields under 1-5 bar CO2. Pyrim-UiO-Co is tolerant to various functional groups and could be recycled and reused at least 10 times. Mechanistic investigation using kinetic, spectroscopic and density functional theory studies suggests that the formylation of benzylamine proceeds sequentially via oxidative addition of PhSiH3 and CO2 insertion, followed by a turn-over limiting reaction with an amine. Our work highlights the importance of MOF-based Earth-abundant metal catalysts for the practical and eco-friendly synthesis of fine chemicals using cheap feedstocks.

Recent Advances in the Catalytic Conversion of Methane to Methanol: From the Challenges of Traditional Catalysts to the Use of Nanomaterials and Metal-Organic Frameworks

Methane and carbon dioxide are the main contributors to global warming, with the methane effect being 25 times more powerful than carbon dioxide. Although the sources of methane are diverse, it is a very volatile and explosive gas. One way to store the energy content of methane is through its conversion to methanol. Methanol is a liquid under ambient conditions, easy to transport, and, apart from its use as an energy source, it is a chemical platform that can serve as a starting material for the production of various higher-value products. Accordingly, the transformation of methane to methanol has been extensively studied in the literature, using traditional catalysts as different types of zeolites. However, in the last few years, a new generation of catalysts has emerged to carry out this transformation with higher conversion and selectivity, and more importantly, under mild temperature and pressure conditions. These new catalysts typically involve the use of a highly porous supporting material such as zeolite, or more recently, metal-organic frameworks (MOFs) and graphene, and metallic nanoparticles or a combination of different types of nanoparticles that are the core of the catalytic process. In this review, recent advances in the porous supports for nanoparticles used for methane oxidation to methanol under mild conditions are discussed.

Bioinspired Cu(II) Defect Sites in ZIF-8 for Selective Methane Oxidation

Activating the C-H bonds of alkanes without further oxidation to more thermodynamically stable products, CO and CO2, is a long-sought goal of catalytic chemistry. Inspired by the monocopper active site of methane monooxygenase, we synthesized a Cu-doped ZIF-8 metal-organic framework with 25% Cu and 75% Zn in the nodes and activated it by heating to 200 °C and dosing in a stepwise fashion with O2, methane, and steam. We found that it does oxidize methane to methanol and formaldehyde. The catalysis persists through at least five cycles, and beyond the third cycle, the selectivity improves to the extent that no CO2 can be detected. Experimental characterization and analysis were carried out by PXRD, DRUV-vis, SEM, and XAS (XANES and EXAFS). The reaction is postulated to proceed at open-coordination copper sites generated by defects, and the mechanism of methanol production was explicated by density functional calculations with the revMO6-L exchange-correlation functional. The calculations reveal a catalytic cycle of oxygen-activated CuI involving the conversion of two molecules of CH4 to two molecules of CH3OH by a sequence of hydrogen atom transfer reactions and rebound steps. For most steps in the cycle, the reaction is more favored by singlet species than by triplets.

Dual Atom Catalysts for Energy and Environmental Applications

The pursuit of high metal utilization in heterogeneous catalysis has triggered the burgeoning interest of various atomically dispersed catalysts. Our aim in this review is to assess key recent findings in the synthesis, characterization, structure-property relationship and computational studies of dual-atom catalysts (DACs), which cover the full spectrum of applications in thermocatalysis, electrocatalysis and photocatalysis. In particular, combination of qualitative and quantitative characterization with cooperation with DFT insights, synergies and superiorities of DACs compare to counterparts, high-throughput catalyst exploration and screening with machine-learning algorithms are highlighted. Undoubtably, it would be wise to expect more fascinating developments in the field of DACs as tunable catalysts.

Full Spectroscopic Characterization of the Molecular Oxygen-Based Methane to Methanol Conversion over Open Fe(II) Sites in a Metal-Organic Framework

Iron-based enzymes efficiently activate molecular oxygen to perform the oxidation of methane to methanol (MTM), a reaction central to the contemporary chemical industry. Conversely, a very limited number of artificial catalysts have been devised to mimic this process. Herein, we employ the MIL-100(Fe) metal-organic framework (MOF), a material that exhibits isolated Fe sites, to accomplish the MTM conversion using O2 as the oxidant under mild conditions. We apply a diverse set of advanced operando X-ray techniques to unveil how MIL-100(Fe) can act as a catalyst for direct MTM conversion. Single-phase crystallinity and stability of the MOF under reaction conditions (200 or 100 °C, CH4 + O2) are confirmed by X-ray diffraction measurements. X-ray absorption, emission, and resonant inelastic scattering measurements show that thermal treatment above 200 °C generates Fe(II) sites that interact with O2 and CH4 to produce methanol. Experimental evidence-driven density functional theory (DFT) calculations illustrate that the MTM reaction involves the oxidation of the Fe(II) sites to Fe(III) via a high-spin Fe(IV)═O intermediate. Catalyst deactivation is proposed to be caused by the escape of CH3• radicals from the relatively large MOF pore cages, ultimately resulting in the formation of hydroxylated triiron units, as proven by valence-to-core X-ray emission spectroscopy. The O2-based MTM catalytic activity of MIL-100(Fe) in the investigated conditions is demonstrated for two consecutive reaction cycles, proving the MOF potential toward active site regeneration. These findings will desirably lay the groundwork for the design of improved MOF catalysts for the MTM conversion.

Mechanistic insight into the effect of active site motif structures on direct oxidation of methane to methanol over Cu-ZSM-5

Direct oxidation of methane to methanol (DMTM), a highly challenging reaction in C1 chemistry, has attracted lots of attention. Herein, we investigate the continuous H2O-mediated N2O-DMTM over a series of Cu-ZSM-5-n zeolites prepared by a solid-state ion-exchange method. Excellent CH3OH productivity (194.8 μmol gcat-1 h-1) and selectivity (67.1%) can be achieved over Cu-ZSM-5-0.3%, which surpasses most recently reported zeolite catalysts. The effect of the active site motif structure on the reaction was systematically investigated by the combined experimental and theoretical studies. It has been revealed that both the monomeric [Cu]+ and binuclear [Cu]+-[Cu]+ sites function to produce CH3OH, following the radical rebound mechanism, wherein the latter one plays a dominant role due to the synergistic effect of neighboring [Cu]+ that can efficiently reduce the N2O dissociation barrier to generate active oxygen for CH4 oxidation. Microkinetic modeling results further show that the dicopper site possesses a much higher net reaction rate (1.23 × 105 s-1) than the monomeric Cu site (0.962 s-1); moreover, H2O can shift the rate determining step from the CH3OH desorption step to the N2O dissociation step over the dicopper site, thereby efficiently favoring CH3OH production and resisting carbon deposition. Generally, the study in the present work would substantially favor other highly efficient catalyst designs.

Highly selective synthesis of surface FeIV=O with nanoscale zero-valent iron and chlorite for efficient oxygen transfer reactions

High-valent iron-oxo species (FeIV=O) has been a long-sought-after oxygen transfer reagent in biological and catalytic chemistry but suffers from a giant challenge in its gentle and selective synthesis. Herein, we propose a new strategy to synthesize surface FeIV=O (≡FeIV=O) on nanoscale zero-valent iron (nZVI) using chlorite (ClO2-) as the oxidant, which possesses an impressive ≡FeIV=O selectivity of 99%. ≡FeIV=O can be energetically formed from the ferrous (FeII) sites on nZVI through heterolytic Cl-O bond dissociation of ClO2- via a synergistic effect between electron-donating surface ≡FeII and proximal electron-withdrawing H2O, where H2O serves as a hydrogen-bond donor to the terminal O atom of the adsorbed ClO2- thereby prompting the polarization and cleavage of Cl-O bond for the oxidation of ≡FeII toward the final formation of ≡FeIV=O. With methyl phenyl sulfoxide (PMS16O) as the probe molecule, the isotopic labeling experiment manifests an exclusive 18O transfer from Cl18O2- to PMS16O18O mediated by ≡FeIV=18O. We then showcase the versatility of ≡FeIV=O as the oxygen transfer reagent in activating the C-H bond of methane for methanol production and facilitating selective triphenylphosphine oxide synthesis with triphenylphosphine. We believe that this new ≡FeIV=O synthesis strategy possesses great potential to drive oxygen transfer for efficient high-value-added chemical synthesis.

MOF-based catalysts: insights into the chemical transformation of greenhouse and toxic gases

Metal-organic framework (MOF)-based catalysts are outstanding alternative materials for the chemical transformation of greenhouse and toxic gases into high-add-value products. MOF catalysts exhibit remarkable properties to host different active sites. The combination of catalytic properties of MOFs is mentioned in order to understand their application. Furthermore, the main catalytic reactions, which involve the chemical transformation of CH4, CO2, NOx, fluorinated gases, O3, CO, VOCs, and H2S, are highlighted. The main active centers and reaction conditions for these reactions are presented and discussed to understand the reaction mechanisms. Interestingly, implementing MOF materials as catalysts for toxic gas-phase reactions is a great opportunity to provide new alternatives to enhance the air quality of our planet.

Chemical complexity for targeted function in heterometallic titanium-organic frameworks

Research on metal-organic frameworks is shifting from the principles that control the assembly, structure, and porosity of these reticular solids, already established, into more sophisticated concepts that embrace chemical complexity as a tool for encoding their function or accessing new properties by exploiting the combination of different components (organic and inorganic) into these networks. The possibility of combining multiple linkers into a given network for multivariate solids with tunable properties dictated by the nature and distribution of the organic connectors across the solid has been well demonstrated. However, the combination of different metals remains still comparatively underexplored due to the difficulties in controlling the nucleation of heterometallic metal-oxo clusters during the assembly of the framework or the post-synthetic incorporation of metals with distinct chemistry. This possibility is even more challenging for titanium-organic frameworks due to the additional difficulties intrinsic to controlling the chemistry of titanium in solution. In this perspective article we provide an overview of the synthesis and advanced characterization of mixed-metal frameworks and emphasize the particularities of those based in titanium with particular focus on the use of additional metals to modify their function by controlling their reactivity in the solid state, tailoring their electronic structure and photocatalytic activity, enabling synergistic catalysis, directing the grafting of small molecules or even unlocking the formation of mixed oxides with stoichiometries not accessible to conventional routes.

Computational Screening of Supported Metal Oxide Nanoclusters for Methane Activation: Insights into Homolytic versus Heterolytic C-H Bond Dissociation

Since its discovery in zeolites, the [CuOCu]²⁺ motif has played an important role in our understanding of selective methane activation over supported metal oxide nanoclusters. Although there are two known C-H bond dissociation mechanisms, namely, homolytic and heterolytic cleavage, most computational studies on optimizing metal oxide nanoclusters for improved methane activation reactivity have focused only on the homolytic mechanism. In this work, both mechanisms were examined for a set of 21 mixed metal oxide complexes of the form of [M₁OM₂]²⁺ (M₁ and M₂ = Mn, Fe, Co, Ni, Cu, and Zn). Except for pure copper, heterolytic cleavage was found to be the dominant C-H bond activation pathway for all systems. Furthermore, mixed systems including [CuOMn]²⁺, [CuONi]²⁺, and [CuOZn]²⁺ are predicted to possess methane activation activity similar to pure [CuOCu]²⁺. These results suggest that both homolytic and heterolytic mechanisms should be considered in computing methane activation energies on supported metal oxide nanoclusters.

Insight into the direct conversion of methane to methanol on modified ZIF-204 from the perspective of DFT-based calculations

Direct oxidation of methane over oxo-doped ZIF-204, a bio-mimetic metal-organic framework, is investigated under first-principles calculations based on density functional theory. In the pristine ZIF-204, the tetrahedral methane molecule anchors to an open monocopper site via the so-called η² configuration with a physisorption energy of 0.24 eV. This weak binding arises from an electrostatic interaction between the negative charge of carbon in the methane molecule and the positive Cu²⁺ cation in the framework. In the modified ZIF-204, the doped oxo species is stabilized at the axial position of a CuN₄-base square pyramid at a distance of 2.06 Å. The dative covalent bond between Cu and oxo is responsible for the formation energy of 1.06 eV. With the presence of the oxo group, the presenting of electrons in the O_p_z orbital accounts for the adsorption of methane via hydrogen bonding with an adsorption energy of 0.30 eV. The methane oxidation can occur via either a concerted direct oxo insertion mechanism or a hydrogen-atom abstraction radical rebound mechanism. Calculations on transition-state barriers show that reactions via the concerted direct oxo insertion mechanism can happen without energy barriers. Concerning the hydrogen-atom abstraction radical rebound mechanism, the C-H bond dissociation of the CH₄ molecule is barrierless, but the C-O bond recombination to form the CH₃OH molecule occurs through a low barrier of 0.16 eV. These predictions suggest the modified ZIF-204 is a promising catalyst for methane oxidization.

Synergistic binding sites in a metal-organic framework for the optical sensing of nitrogen dioxide

Luminescent metal-organic frameworks are an emerging class of optical sensors, able to capture and detect toxic gases. Herein, we report the incorporation of synergistic binding sites in MOF-808 through post-synthetic modification with copper for optical sensing of NO₂ at remarkably low concentrations. Computational modelling and advanced synchrotron characterization tools are applied to elucidate the atomic structure of the copper sites. The excellent performance of Cu-MOF-808 is explained by the synergistic effect between the hydroxo/aquo-terminated Zr₆O₈ clusters and the copper-hydroxo single sites, where NO₂ is adsorbed through combined dispersive- and metal-bonding interactions.

Selective Methane Oxidation to Acetic Acid Using Molecular Oxygen over a Mono-Copper Hydroxyl Catalyst

Acetic acid is an industrially important chemical, produced mainly via carbonylation of methanol using precious metal-based homogeneous catalysts. As a low-cost feedstock, methane is commercially transformed to acetic acid via a multistep process involving energy-intensive methane steam reforming, methanol synthesis, and, subsequently, methanol carbonylation. Here, we report a direct single-step conversion of methane to acetic acid using molecular oxygen (O₂) as the oxidant under mild conditions over a mono-copper hydroxyl site confined in a porous cerium metal-organic framework (MOF), Ce-UiO-Cu(OH). The Ce-UiO MOF-supported single-site copper hydroxyl catalyst gave exceptionally high acetic acid productivity of 335 mmolg_cat^-1 in 96% selectivity with a Cu TON up to 400 at 115 °C in water. Our spectroscopic and theoretical studies and controlled experiments reveal that the conversion of methane to acetic acid occurs via oxidative carbonylation, where methane is first activated at the copper hydroxyl site via σ-bond metathesis to afford Cu-methyl species, followed by carbonylation with in situ-generated carbon monoxide and subsequent hydrolysis by water. This work may guide the rational design of heterogeneous abundant metal catalysts for the activation and conversion of methane to acetic acid and other valuable chemicals under mild and environmentally friendly reaction conditions.

Metal-Organic Frameworks for Greenhouse Gas Applications

Using petrol to supply energy for a car or burning coal to heat a building generates plenty of greenhouse gas (GHG) emissions, including carbon dioxide (CO₂ ), water vapor (H₂ O), methane (CH₄ ), nitrous oxide (N₂ O), ozone (O₃ ), fluorinated gases. These up-and-coming metal-organic frameworks (MOFs) are structurally endowed with rigid inorganic nodes and versatile organic linkers, which have been extensively used in the GHG-related applications to improve the lives and protect the environment. Porous MOF materials and their derivatives have been demonstrated to be competitive and promising candidates for GHG separation, storage and conversions as they shows facile preparation, large porosity, adjustable nanostructure, abundant topology, and tunable physicochemical property. Enormous progress has been made in GHG storage and separation intrinsically stemmed from the different interaction between guest molecule and host framework from MOF itself in the recent five years. Meanwhile, the use of porous MOF materials to transform GHG and the influence of external conditions on the adsorption performance of MOFs for GHG are also enclosed. In this review, it is also highlighted that the existing challenges and future directions are discussed and envisioned in the rational design, facile synthesis and comprehensive utilization of MOFs and their derivatives for practical applications.

High-Throughput Experimentation, Theoretical Modeling, and Human Intuition: Lessons Learned in Metal-Organic-Framework-Supported Catalyst Design

We have screened an array of 23 metals deposited onto the metal-organic framework (MOF) NU-1000 for propyne dimerization to hexadienes. By a first-of-its-kind study utilizing data-driven algorithms and high-throughput experimentation (HTE) in MOF catalysis, yields on Cu-deposited NU-1000 were improved from 0.4 to 24.4%. Characterization of the best-performing catalysts reveal conversion to hexadiene to be due to the formation of large Cu nanoparticles, which is further supported by reaction mechanisms calculated with density functional theory (DFT). Our results demonstrate both the strengths and weaknesses of the HTE approach. As a strength, HTE excels at being able to find interesting and novel catalytic activity; any a priori theoretical approach would be hard-pressed to find success, as high-performing catalysts required highly specific operating conditions difficult to model theoretically, and initial simple single-atom models of the active site did not prove representative of the nanoparticle catalysts responsible for conversion to hexadiene. As a weakness, our results show how the HTE approach must be designed and monitored carefully to find success; in our initial campaign, only minor catalytic performances (up to 4.2% yield) were achieved, which were only improved following a complete overhaul of our HTE approach and questioning our initial assumptions.

Conceptual and Practical Aspects of Metal-Organic Frameworks for Solid-Gas Reactions

The presence of site-isolated and well-defined metal sites has enabled the use of metal-organic frameworks (MOFs) as catalysts that can be rationally modulated. Because MOFs can be addressed and manipulated through molecular synthetic pathways, they are chemically similar to molecular catalysts. They are, nevertheless, solid-state materials and therefore can be thought of as privileged solid molecular catalysts that excel in applications involving gas-phase reactions. This contrasts with homogeneous catalysts, which are overwhelmingly used in the solution phase. Herein, we review theories dictating gas phase reactivity within porous solids and discuss key catalytic gas-solid reactions. We further treat theoretical aspects of diffusion within confined pores, the enrichment of adsorbates, the types of solvation spheres that a MOF might impart on adsorbates, definitions of acidity/basicity in the absence of solvent, the stabilization of reactive intermediates, and the generation and characterization of defect sites. The key catalytic reactions we discuss broadly include reductive reactions (olefin hydrogenation, semihydrogenation, and selective catalytic reduction), oxidative reactions (oxygenation of hydrocarbons, oxidative dehydrogenation, and carbon monoxide oxidation), and C-C bond forming reactions (olefin dimerization/polymerization, isomerization, and carbonylation reactions).

Computational and Experimental Characterization of the Ligand Environment of a Ni-Oxo Catalyst Supported in the Metal-Organic Framework NU-1000

Heterogeneous catalysts exhibit significant changes in composition due to the influence of operating conditions, and these compositional changes can have dramatic effects on catalytic performance. For traditional bulk metal heterogeneous catalysts, relationships between composition and catalytic operating conditions are well documented. However, the influence of operating conditions on the compositions of single-site heterogeneous catalysts remains largely unresolved. To address this, we report a combined computational and experimental characterization of a Ni oxo catalyst under catalytic hydrogenation conditions. Specifically, pair distribution function (PDF) analysis is combined with ab initio thermodynamic modeling to investigate ligand environments present on a Ni oxo cluster supported in the metal-organic framework NU-1000. Comparisons of the experimentally observed and simulated Ni-O coordination numbers and Ni-O, Ni···Ni, and Ni···Zr distances provide insight into the Ni ligand environment under H₂ (g). These comparisons suggest significant OH and H₂O content and, further, that different Ni ions within the cluster and/or NU-1000 structure may comprise subtly different numbers of these ligands. Further, the observation of significant H₂O content under H₂ (g) suggests that the NU-1000 support supplies H₂O to the cluster. Examples of ligand environments that could lead to the observed PDFs are provided. The combination of simulations and experiments provides new insights into the ligand environment for Ni-NU-1000 catalysts that will be useful for understanding the ligand environments of other single-site Ni catalysts as well.

Influence of 1-Butene Adsorption on the Dimerization Activity of Single Metal Cations on UiO-66 Nodes

Grafting metal cations to missing linker defect sites in zirconium-based metal-organic frameworks, such as UiO-66, produces a uniquely well-defined and homotopic catalytically active site. We present here the synthesis and characterization of a group of UiO-66-supported metal catalysts, M-UiO-66 (M = Ni, Co, Cu, and Cr), for the catalytic dimerization of alkenes. The hydrogen-deuterium exchange via deuterium oxide adsorption followed by infrared spectroscopy showed that the last molecular water ligand desorbs from the sites after evacuation at 300 °C leading to M(OH)-UiO-66 structures. Adsorption of 1-butene is studied using calorimetry and density functional theory techniques to characterize the interactions of the alkene with metal cation sites that are found active for alkene oligomerization. For the most active Ni-UiO-66, the removal of molecular water from the active site significantly increases the 1-butene adsorption enthalpy and almost doubles the catalytic activity for 1-butene dimerization in comparison to the presence of water ligands. Other M-UiO-66 (M = Co, Cu, and Cr) exhibit 1-3 orders of magnitude lower catalytic activities compared to Ni-UiO-66. The catalytic activities correlate linearly with the Gibbs free energy of 1-butene adsorption. Density functional theory calculations probing the Cossee-Arlman mechanism for all metals support the differences in activity, providing a molecular level understanding of the metal site as the active center for 1-butene dimerization.

Novel catalysts with multivalence copper for organic pollutants removal from wastewater with excellent selectivity and stability in Fenton-like process under neutral pH conditions

Fenton-like reaction has been widely used for organics degradation. However, most Fenton-like reaction works at low pH range (pH < 4) with uncontrollable selectivity of hydroxyl radicals from H₂ O₂ activation, and unsatisfied catalyst stability, which is compromised advanced oxidation performance for water/wastewater treatments. In this work, to solve the drawbacks, novel copper catalysts were fabricated via hydrogen reduction/calcination of Cu²⁺ -supported Al/MCM-41 with precisely controllable copper valence state. Compared with catalysts with monovalence copper (i.e., CuO, Cu, and Cu²⁺ ), the obtained catalysts with multivalence copper present higher selectivity, excellent stability towards •OH radical pathways, and outperformance in pCBA degradation efficiency at neutral state. In addition, the fabricated catalysts also exhibited excellent phenol removal efficiency (75.5%) and H₂ O₂ utilization efficiency (47.9%) within neutral environment. Moreover, the degradation efficiency of phenol approaches to 100% within only 2 h. The catalyst also shows good stability for organic pollutants removal, which shows good potential in catalytic oxidation for phenolic compounds-containing wastewater in Fenton-like reaction, especially under neutral pH conditions. PRACTITIONER POINTS: Multivalence copper presents great potentials for organic compounds removal at neutral condition. Multivalence copper shows higher selectivity toward •OH and good stability at neutral condition. Multivalence copper exhibiters outperformed phenol removal efficiency at neutral condition.

Exchange controlled triplet fusion in metal-organic frameworks

Triplet-fusion-based photon upconversion holds promise for a wide range of applications, from photovoltaics to bioimaging. The efficiency of triplet fusion, however, is fundamentally limited in conventional molecular and polymeric systems by its spin dependence. Here, we show that the inherent tailorability of metal-organic frameworks (MOFs), combined with their highly porous but ordered structure, minimizes intertriplet exchange coupling and engineers effective spin mixing between singlet and quintet triplet-triplet pair states. We demonstrate singlet-quintet coupling in a pyrene-based MOF, NU-1000. An anomalous magnetic field effect is observed from NU-1000 corresponding to an induced resonance between singlet and quintet states that yields an increased fusion rate at room temperature under a relatively low applied magnetic field of 0.14 T. Our results suggest that MOFs offer particular promise for engineering the spin dynamics of multiexcitonic processes and improving their upconversion performance.

Recent Insights into Cu-Based Catalytic Sites for the Direct Conversion of Methane to Methanol

Direct conversion of methane to methanol is an effective and practical process to improve the efficiency of natural gas utilization. Copper (Cu)-based catalysts have attracted great research attention, due to their unique ability to selectively catalyze the partial oxidation of methane to methanol at relatively low temperatures. In recent decades, many different catalysts have been studied to achieve a high conversion of methane to methanol, including the Cu-based enzymes, Cu-zeolites, Cu-MOFs (metal-organic frameworks) and Cu-oxides. In this mini review, we will detail the obtained evidence on the exact state of the active Cu sites on these various catalysts, which have arisen from the most recently developed techniques and the results of DFT calculations. We aim to establish the structure–performance relationship in terms of the properties of these materials and their catalytic functionalities, and also discuss the unresolved questions in the direct conversion of methane to methanol reactions. Finally, we hope to offer some suggestions and strategies for guiding the practical applications regarding the catalyst design and engineering for a high methanol yield in the methane oxidation reaction.

Creating enzyme-mimicking nanopockets in metal-organic frameworks for catalysis

Numerous efforts are being made toward constructing artificial nanopockets inside heterogeneous catalysts to implement challenging reactions that are difficult to occur on traditional heterogeneous catalysts. Here, the enzyme-mimetic nanopockets are fabricated inside the typical UiO-66 by coordinating zirconium nodes with terephthalate (BDC) ligands and monocarboxylate modulators including formic acid (FC), acetic acid (AC), or trifluoroacetic acid (TFA). When used in transfer hydrogenation of alkyl levulinates with isopropanol toward γ-valerolactone (GVL), these modulators endow zirconium sites with enhanced activity and selectivity and good stability. The catalytic activity of UiO-66FC is ~30 times that of UiO-66, also outperforming the state-of-the-art heterogeneous catalysts. Distinct from general consensus on electron-withdrawing or electron-donating effect on the altered activity of metal centers, this improvement mainly originates from the conformational change of modulators in the nanopocket to assist forming the rate-determining six-membered ring intermediate at zirconium sites, which are stabilized by van der Waals force interactions.

Direct photo-oxidation of methane to methanol over a mono-iron hydroxyl site

Natural gas, consisting mainly of methane (CH₄), has a relatively low energy density at ambient conditions (~36 kJ l^-1). Partial oxidation of CH₄ to methanol (CH₃OH) lifts the energy density to ~17 MJ l^-1 and drives the production of numerous chemicals. In nature, this is achieved by methane monooxygenase with di-iron sites, which is extremely challenging to mimic in artificial systems due to the high dissociation energy of the C-H bond in CH₄ (439 kJ mol^-1) and facile over-oxidation of CH₃OH to CO and CO₂. Here we report the direct photo-oxidation of CH₄ over mono-iron hydroxyl sites immobilized within a metal-organic framework, PMOF-RuFe(OH). Under ambient and flow conditions in the presence of H₂O and O₂, CH₄ is converted to CH₃OH with 100% selectivity and a time yield of 8.81 ± 0.34 mmol g_cat^-1 h^-1 (versus 5.05 mmol g_cat^-1 h^-1 for methane monooxygenase). By using operando spectroscopic and modelling techniques, we find that confined mono-iron hydroxyl sites bind CH₄ by forming an [Fe-OH···CH₄] intermediate, thus lowering the barrier for C-H bond activation. The confinement of mono-iron hydroxyl sites in a porous matrix demonstrates a strategy for C-H bond activation in CH₄ to drive the direct photosynthesis of CH₃OH.

Revisiting Vibrational Spectroscopy to Tackle the Chemistry of Zr6O8 Metal-Organic Framework Nodes

The metal-organic framework MOF-808 contains Zr6O8 nodes with a high density of vacancy sites, which can incorporate carboxylate-containing functional groups to tune chemical reactivity. Although the postsynthetic methods to modify the chemistry of the Zr6O8 nodes in MOFs are well known, tackling these alterations from a structural perspective is still a challenge. We have combined infrared spectroscopy experiments and first-principles calculations to identify the presence of node vacancies accessible for chemical modifications within the MOF-808. We demonstrate the potential of our approach to assess the decoration of MOF-808 nodes with different catechol-benzoate ligands. Furthermore, we have applied advanced synchrotron characterization tools, such as pair distribution function analyses and X-ray absorption spectroscopy, to resolve the atomic structure of single metal sites incorporated into the catechol groups postsynthetically. Finally, we demonstrate the catalytic activity of these MOF-808 materials decorated with single copper sites for 1,3-dipolar cycloadditions.

Titration of Cu(I) Sites in Cu-ZSM-5 by Volumetric CO Adsorption

Cu-exchanged zeolites are widely studied materials because of their importance in industrial energetic and environmental processes. Cu redox speciation lies at the center of many of these processes but is experimentally difficult to investigate in a quantitative manner with regular laboratory equipment. This work presents a novel technique for this purpose that exploits the selective adsorption of CO over accessible Cu(I) sites to quantify them. In particular, isothermal volumetric adsorption measurements are performed at 50 °C on a series of opportunely pre-reduced Cu-ZSM-5 to assess the relative fraction of Cu(I); the setup is fairly simple and only requires a regular volumetric adsorption apparatus to perform the actual measurement. Repeatability tests are carried out on the measurement and activation protocols to assess the precision of the technique, and the relative standard deviation (RSD) obtained is less than 5%. Based on the results obtained for these materials, the same CO adsorption protocol is studied for the sample using infrared spectroscopy, and a good correlation is found between the results of the volumetric measurements and the absorbance of the peak assigned to the Cu(I)-CO adducts. A linear model is built for this correlation, and the molar attenuation coefficient is obtained, allowing for spectrophotometric quantification. The good sensitivity of the spectrophotometric approach and the precision and simplicity of the volumetric approach form a complementary set of tools to quantitatively study Cu redox speciation in these materials at the laboratory scale, allowing for a wide range of Cu compositions to be accurately investigated.

Selective Catalytic Oxidation of Methane to Methanol in Aqueous Medium over Copper Cations Promoted by Atomically Dispersed Rhodium on TiO2

Direct conversion of methane into value-added chemicals, such as methanol under mild conditions, is a promising route for industrial applications. In this work, atomically dispersed Rh on TiO₂ suspended in an aqueous solution was used for the oxidation of methane to methanol. Promoted by copper cations (as co-catalyst) in solution, the catalysts exhibited high activity and selectivity for the production of methanol using molecular oxygen with the presence of carbon monoxide at 150 °C with a reaction pressure of 31 bar. Millimole level yields of methanol were reached with the selectivity higher than 99 % using the Rh/TiO₂ catalysts with the promotion of the copper cation. CO was the reductive agent to generate H₂ from H₂ O, which led to the formation of H₂ O₂ through the reaction of H₂ and O₂ . Atomically dispersed Rh activated the C-H bond in CH₄ and catalyzed the oxidation using H₂ O₂ . Copper cations maintained the low-valence state of Rh. Moreover, copper acted as a scavenger for suppressing the overoxidation, thus leading to the high selectivity of methanol.

Oxo dicopper anchored on carbon nitride for selective oxidation of methane

Selective conversion of methane (CH₄) into value-added chemicals represents a grand challenge for the efficient utilization of rising hydrocarbon sources. We report here dimeric copper centers supported on graphitic carbon nitride (denoted as Cu₂@C₃N₄) as advanced catalysts for CH₄ partial oxidation. The copper-dimer catalysts demonstrate high selectivity for partial oxidation of methane under both thermo- and photocatalytic reaction conditions, with hydrogen peroxide (H₂O₂) and oxygen (O₂) being used as the oxidizer, respectively. In particular, the photocatalytic oxidation of CH₄ with O₂ achieves >10% conversion, and >98% selectivity toward methyl oxygenates and a mass-specific activity of 1399.3 mmol g Cu⁻¹h⁻¹. Mechanistic studies reveal that the high reactivity of Cu₂@C₃N₄ can be ascribed to symphonic mechanisms among the bridging oxygen, the two copper sites and the semiconducting C₃N₄ substrate, which do not only facilitate the heterolytic scission of C-H bond, but also promotes H₂O₂ and O₂ activation in thermo- and photocatalysis, respectively.

Selective conversion of methane into value-added chemicals is a promising approach for utilization of hydrocarbon sources. Here the authors develop dimeric copper centers supported on graphitic carbon nitride (denoted as Cu₂@C₃N₄) with >10% conversion and >98% selectivity toward methyl oxygenates in both thermo- and photo- catalytic reactions.

Modulating Chemical Environments of Metal-Organic Framework-Supported Molybdenum(VI) Catalysts for Insights into the Structure-Activity Relationship in Cyclohexene Epoxidation

Solid supports are crucial in heterogeneous catalysis due to their profound effects on catalytic activity and selectivity. However, elucidating the specific effects arising from such supports remains challenging. We selected a series of metal-organic frameworks (MOFs) with 8-connected Zr₆ nodes as supports to deposit molybdenum(VI) onto to study the effects of pore environment and topology on the resulting Mo-supported catalysts. As characterized by X-ray absorption spectroscopy (XAS) and single-crystal X-ray diffraction (SCXRD), we modulated the chemical environments of the deposited Mo species. For Mo-NU-1000, the Mo species monodentately bound to the Zr₆ nodes were anchored in the microporous c-pore, but for Mo-NU-1008 they were bound in the mesopore of Mo-NU-1008. Both monodentate and bidentate modes were found in the mesopore of Mo-NU-1200. Cyclohexene epoxidation with H₂O₂ was probed to evaluate the support effect on catalytic activity and to unveil the resulting structure-activity relationships. SCXRD and XAS studies demonstrated the atomically precise structural differences of the Mo binding motifs over the course of cyclohexene epoxidation. No apparent structural change was observed for Mo-NU-1000, whereas the monodentate mode of Mo species in Mo-NU-1008 and the monodentate and bidentate Mo species in Mo-NU-1200 evolved to a new bidentate mode bound between two adjacent oxygen atoms from the Zr₆ node. This work demonstrates the great advantage of using MOF supports for constructing heterogeneous catalysts with modulated chemical environments of an active species and elucidating structure-activity relationships in the resulting reactions.

Light alkane oxidation over well-defined active sites in metal–organic framework materials

We review structure–catalytic property relationships for MOF materials used in the direct oxidation of light alkanes, focusing specifically on the elucidation of active site structures and probes for reaction mechanisms.

Metal–organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C–H bond activation and functionalization reactions

The review summarizes the state-of-the-art of C–H active transformations over crystalline and amorphous porous materials as new emerging heterogeneous (photo)catalysts.

Transforming CO2 into Methanol with N-Heterocyclic Carbene-Stabilized Coinage Metal Hydrides Immobilized in a Metal-Organic Framework UiO-68

By synergizing the advantages of homogeneous and heterogeneous catalysis, single-site heterogeneous catalysis represents a highly promising opportunity for many catalytic processes. Particularly, the unprecedented designability and versatility of metal-organic frameworks (MOFs) promote them as salient platforms for designing single-site catalytic materials by introducing isolated, well-defined active sites into the frameworks. Herein, we design new MOF-supported single-site catalysts for CO₂ hydrogenation to methanol (CH₃OH), a reaction of great significance in CO₂ valorization. Specifically, N-heterocyclic carbene (NHC), a class of excellent modifiers and anchors, is used to anchor coinage metal hydrides M(I)-H (M = Cu, Ag, and Au) onto the organic linker of UiO-68. The strong metal-ligand interactions between NHC and M(I)-H verify the robustness and feasibility of our design strategy. On the tailor-made catalysts, a three-stage sequential transformation is proposed for CH₃OH synthesis with HCOOH and HCHO as the transit intermediates. A density functional theory-based comparative study suggests that UiO-68 decorated with NHC-Cu(I)-H performs best for CO₂ hydrogenation to HCOOH. This is further rationalized by three linear relationships for the Gibbs energy barrier of CO₂ hydrogenation to HCOO intermediate, the first with the NBO charge of the hydride in NHC-M(I)-H, the second with the electronegativity of M, and the third with the gap between the lowest unoccupied molecular orbital of CO₂ and the highest occupied molecular orbital of the catalyst. It is confirmed that the high efficiency of MOF-supported NHC-Cu(I)-H for CO₂ transformation to CH₃OH is via the proposed three-stage mechanism, and in each stage, the step involving heterolytic dissociation of H₂ together with product generation is the most energy-intensive. The rate-limiting step in the entire mechanism is identified to be H₂ dissociation accompanying with simultaneous HCHO and H₂O formation. Altogether, the tailor-made UiO-68 decorated with NHC-Cu(I)-H features well-defined active sites, enables precise manipulation of reaction paths, and demonstrates excellent reactivity for CO₂ hydrogenation to CH₃OH. It is also predicted to surpass a recently reported MOF-808 catalyst consisting of neighboring Zn²⁺-O-Zr⁴⁺ sites. The designed MOFs as well as the proposed strategy here establish a new paradigm and can be extended to other hydrogenation reactions.

Z-Scheme In2 S3 /NU-1000 Heterojunction for Boosting Photo-Oxidation of Sulfide into Sulfoxide under Ambient Conditions

Photocatalytic oxidation of sulfide into sulfoxide has attracted extensive attention as an environmentally friendly strategy for chemical transformations or toxic chemicals degradation. Herein, we construct a series of In₂ S₃ /NU-1000 heterojunction photocatalysts, which can efficiently catalyze the oxidation of sulfides to form sulfoxides as the sole product under LED lamp (full-spectrum) illumination in air at room temperature. Especially, the sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES), can also be photocatalytically oxidized with In₂ S₃ /NU-1000 to afford nontoxic 2-chloroethyl ethyl sulfoxide (CEESO) selectively and effectively. In contrast, individual NU-1000 and In₂ S₃ show very low catalytic activity on this reaction. The significantly improved photocatalytic activity is ascribed to the constructing of an efficient Z-scheme photocatalysts In₂ S₃ /NU-1000, which exhibits the enhancement of light harvesting, the promotion of photogenerated electron-hole separation, and the retention of high porosity of the parent MOF. Moreover, mechanism studies in photocatalytic oxidation reveal that the superoxide radical (^. O₂ ^- ) and singlet oxygen (¹ O₂ ) are the main oxidative species in the oxidation system. This work exploits the opportunities for the construction of porous Z-scheme photocatalysts based on the photoactive MOFs materials and inorganic semiconductors for promoting catalytic organic transformations. More importantly, it provides a route to the rational design of efficient photocatalysts for the detoxification of mustard gas.