Detection of gliadin in foods using a quartz crystal microbalance biosensor that incorporates gold nanoparticles

A label-free aptamer-based colorimetric biosensor for rapid gliadin detection in foods: a focus on pasta, bread and cookies

Despite numerous advancements in gluten detection, a substantial need remains for innovative, cost-effective, in situ methods that can be employed without complex analytical instruments. Addressing this demand, this study introduces a pioneering label-free colorimetric biosensor for the in situ detection of gliadin, a major component of gluten, which is a prevalent trigger of food allergies. Our novel approach employs the strategic coating of gold nanoparticles (AuNP) with gliadin-specific aptamers. In the absence of gliadin, these aptamers stably disperse AuNP, preventing their aggregation. However, upon the introduction of gliadin and in the presence of sodium chloride, AuNP aggregate, yielding a measurable colorimetric signal that facilitates the precise quantification of gliadin. Under rigorously optimized conditions, this AuNP/aptamer-based colorimetric biosensor demonstrated exceptional sensitivity and selectivity, with a detection limit of 32.1 ng mL-1 and a linear response range of 0-300 ng mL-1. Critically, the sensor maintained reliable performance when applied to real-world food samples, including gluten-free bread, cookies, and pasta. Due to its simplicity, selectivity, speed, and cost-effectiveness, this assay represents a significant advancement over current gluten detection methods. Moreover, the developed AuNP/aptamer-based colorimetric biosensor design holds promising potential for adaptation to detect other food allergens or protein toxins through selective aptamer modifications.

Nanomedicine as a potential novel therapeutic approach against the dengue virus

Dengue is an arbovirus infection which is transmitted by Aedes mosquitoes. Its prompt detection and effective treatment is a global health challenge. Various nanoparticle-based vaccines have been formulated to present immunogen (antigens) to instigate an immune response or prevent virus spread, but no specific treatment has been devised. This review explores the role of nanomedicine-based therapeutic agents against dengue virus, taking into consideration the applicable dengue virus assays that are sensitive, specific, have a short turnaround time and are inexpensive. Various kinds of metallic, polymeric and lipid nanoparticles with safe and effective profiles present an alternative strategy that could provide a better remedy for eradicating the dengue virus.

Gold-based nanoplatform for a rapid lateral flow immunochromatographic test assay for gluten detection

Background

Gluten, a food allergen, is available in foods derived from wheat, rye and barley. It damages the small intestine and causes celiac disease. Herein, we designed a rapid immunochromatographic lateral flow test assay for detecting the gluten contents of raw materials. In this rapid test, the presence of gluten was screened through the capturing of gliadin (a toxic component of gluten) by two identical gliadin monoclonal antibodies. One of the antibodies was immobilized on the membrane in the test zone as a capture reagent. The other antibody was labeled with gold nanoparticles (AuNPs) as a detector reagent.

Results

Gold nanoparticles with a size of about 20 nm were synthesized and conjugated to the gliadin monoclonal antibodies. The detection limit of the experimental assay was 20 ppm and positive results were visualized after 15 min using only 40 μL of the extracted sample for each test. Analysis of different flour samples identified the best sensitivity and specificity of the lateral flow test strip (LFTS).

Conclusion

The experimental LFTS is an easy-to-use and rapid method for the screening of gluten level in raw materials. The LFTS may be employed to ensure the safety of foods.

Recent advances in analytical strategies and microsystems for food allergen detection

Food allergies are abnormal immune responses that typically occur within short period after exposure of certain allergenic proteins in food or food-related resources. Currently, the means to treat food allergies is not clearly understood, and the only known prevention method is avoiding the consumption of allergen-containing foods. From the viewpoint of analytical methods, the effective detection of food allergens is hindered by the effects of various treatment processes and food matrices on trace amounts of allergens. The aim of this effort is to provide the reader with a clear and concise view of new advances for the detection of food allergens. Therefore, the present review explored the development status of various biosensors for the real-time, on-site detection of food allergens with high selectivity and sensitivity. The review also described the analytical consideration for the quantification of food allergens, and global development trends and the future availability of these technologies.

Patterning Large-Scale Nanostructured Microarrays on Coverslip for Sensitive Plasmonic Detection of Aqueous Gliadin Traces

User-friendly devices for detecting low gliadin content in commercial foods are of extreme importance for people with gluten diseases. With this concern, the present work proposes a rapid and sensitive optical nanostructured microarrays platform for the detection of gliadin using specific anti-gliadin IgG antibodies immobilized on annealed gold nanostructures (AuNPs) obtained after the high annealing process (550 °C) of gold thin films evaporated on commercial glass coverslips. Localized Surface Plasmon Resonance (LSPR) immunosensing of gliadin in the range of 0.1 ppm to 1000 ppm is successfully achieved. In addition, the biofunctionalization protocol was used for gluten screening in five food complex products.

Rapid spectroscopic method for quantifying gluten concentration as a potential biomarker to test adulteration of green banana flour

The demand for gluten-free banana flour has led manufactures to enforce strict measures for quality control. A need has arisen for the development of more sensitive and reliable methods to test the quality of green banana flour (GBF). The objective of this study was to develop rapid visible to near-infrared (Vis-NIR) based spectroscopic models to detect gluten concentration, as a biomarker to detect wheat flour adulteration in green banana flour (GBF). Spectroscopic data were acquired using a desktop (FOSS®) Vis-NIR spectroscopy ranging from 400 to 2500 nm of the electromagnetic spectrum. The spectral and reference data were submitted to principal component analysis (PCA) and partial least squares regression (PLSR) for the development of gluten adulteration detection models. Calibration models were constructed based on a full cross-validation approach, consisting of 51 samples for the calibration set and 21 samples for the test set. PCA scores plot discriminated gluten adulterated and unadulterated GBF samples with 100% accuracy for the first two principal components (PCs). The optimal prediction model was obtained after a combination of baseline (offset and baseline linear correlation) and standard normal variate (SNV) pre-processing technique. This model showed a 94% coefficient of determination of cross-validation (R²_cv) and prediction (R²_p); root mean square error of cross-validation (RMSECV) of 3.7 mg/kg, root mean square error of prediction (RMSEP) of 3.9 mg/kg; and RPD value of 4. This work has demonstrated that Vis-NIRS method is a robust and feasible technology that may be used to ensure the safety of banana flour and that this product stays gluten-free by providing good and reliable gluten detection and quantification prediction models.

A biomimetic "intestinal microvillus" cell sensor based on 3D bioprinting for the detection of wheat allergen gliadin

A biomimetic "intestinal microvillus" electrochemical cell sensor based on three-dimensional (3D) bioprinting was developed, which can specifically and accurately detect wheat gliadin. Self-assembled flower-like copper oxide nanoparticles (FCONp) and hydrazide-functionalized multiwalled carbon nanotubes (MWCNT-CDH) were innovatively synthesized to improve the sensor performance. A conductive biocomposite hydrogel (bioink) was prepared by mixing FCONp and MWCNT-CDH based on GelMA gel. The cluster-shaped microvillus structure of small intestine was accurately printed on the screen printing electrode with the prepared bioink using stereolithography 3D-bioprinting technology, and then the Rat Basophilic Leukemia cells were immobilized on the gel skeleton. Next, the developed cell sensor was used to effectively detect wheat allergen gliadin. The experimental results show that the bioprinted cell sensor sensitively detects wheat gliadin when the optimized cell numbers and immobilized time are 1 × 10⁶ cells/mL and 10 min, respectively. The linear detection range is 0.1-0.8 ng/mL, and the detection limit is 0.036 ng/mL. The electrochemical cell sensor based on 3D printing technology has excellent stability and reproducibility. Thus, a simple and novel electrochemical detection approach for food allergens was established in this study with potential application in food safety detection and evaluation.

A fluorogenic capped mesoporous aptasensor for gluten detection

Celiac disease is a complex and autoimmune disorder caused by the ingestion of gluten affecting almost 1% of global population. Nowadays an effective treatment does not exist, and the only way to manage the disease is the removal of gluten from the diet. Owing the key role played by gluten, clear and regulated labelling of foodstuff and smart methods for gluten detection are needed to fight frauds on food industry and to avoid the involuntary ingestion of this protein by celiac patients. On that scope, the development of a novel detection system of gluten is here presented. The sensor consists of nanoporous anodic alumina films loaded with a fluorescent dye and capped with an aptamer that recognizes gliadin (gluten's soluble proteins). In the presence of gliadin, aptamer sequences displace from the surface of anodic alumina resulting in pore opening and dye delivery. The dispositive shows a limit of detection (LOD) of 100 μg kg^-1 of gliadin, good selectivity and a detection time of approximately 60 min. Moreover, the sensor is validated in real food samples. This novel probe allows fast gluten detection through a simple signalling process with potential use for food control.

A Systematic Review of Food Allergy: Nanobiosensor and Food Allergen Detection

Several individuals will experience accidental exposure to an allergen. In this sense, the industry has invested in the processes of removing allergenic compounds in food. However, accidental exposure to allergenic proteins can result from allergenic substances not specified on labels. Analysis of allergenic foods is involved in methods based on immunological, genetic, and mass spectrometry. The traditional methods have some limitations, such as high cost. In recent years, biosensor and nanoparticles combined have emerged as sensitive, selective, low-cost, and time-consuming techniques that can replace classic techniques. Nevertheless, each nanomaterial has shown a different potential to specific allergens or classes. This review used Preferred Reporting Items for Systematic Reviews and the Meta-Analysis guidelines (PRISMA) to approach these issues. A total of 104 articles were retrieved from a standardized search on three databases (PubMed, Scopus and Web of Science). The systematic review article is organized by the category of allergen detection and nanoparticle detection. This review addresses the relevant biosensors and nanoparticles as gold, carbon, graphene, quantum dots to allergen protein detection. Among the selected articles it was possible to notice a greater potential application on the allergic proteins Ah, in peanuts and gold nanoparticle-base as a biosensor. We envision that in our review, the association between biosensor and nanoparticles has shown promise in the analysis of allergenic proteins present in different food samples.

Acoustic Multi-Detection of Gliadin Using QCM Crystals Patterned with Controlled Sectors of TEM Grid and Annealed Nanoislands on Gold Electrode

Celiac diseases are a group of gluten ingestion-correlated pathologies that are widespread and, in some cases, very dangerous for human health. The only effective treatment is the elimination of gluten from the diet throughout life. Nowadays, the food industries are very interested in cheap, easy-to-handle methods for detecting gluten in food, in order to provide their consumers with safe and high-quality food. Here, for the first time, the manufacture of controlled micropatterns of annealed gold nanoislands (AuNIs) on a single QCM crystal (QCM-color) and their biofunctionalization for the specific detection of traces of gliadin is reported. In addition, the modified quartz crystal with a TEM grid and 30 nm Au (Q-TEM grid crystal) is proposed as an acoustic sensitive biosensing platform for the rapid screening of the gliadin content in real food products.

Gluten Detection Methods and Their Critical Role in Assuring Safe Diets for Celiac Patients

Celiac disease, wheat sensitivity, and allergy represent three different reactions, which may occur in genetically predisposed individuals on the ingestion of wheat and derived products with various manifestations. Improvements in the disease diagnostics and understanding of disease etiology unveiled that these disorders are widespread around the globe affecting about 7% of the population. The only known treatment so far is a life-long gluten-free diet, which is almost impossible to follow because of the contamination of allegedly "gluten-free" products. Accidental contamination of inherently gluten-free products could take place at any level from field to shelf because of the ubiquity of these proteins/grains. Gluten contamination of allegedly "gluten-free" products is a constant threat to celiac patients and a major health concern. Several detection procedures have been proposed to determine the level of contamination in products for celiac patients. The present article aims to review the advantages and disadvantages of different gluten detection methods, with emphasis on the recent technology that allows identification of the immunogenic-gluten peptides without the use of antibodies. The possibility to detect gluten contamination by different approaches with similar or better detection efficiency in different raw and processed foods will guarantee the safety of the foods for celiac patients.

Gold substrates of controlled roughness and electrokinetic properties formed by nanoparticle deposition

The kinetics of positively charged gold nanoparticle self-assembly on oxidized silicon substrates (wafers) under diffusion-controlled transport was studied using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The latter technique allowed the roughness parameters of the monolayer (root mean square) to be determined as a function of the particle coverage. These results were adequately interpreted in terms of a theoretical model developed for surfaces covered by features of spherical shape considering the tip convolution effect. The stability and the electrokinetic characteristics (zeta potential) of the monolayers were also acquired using streaming potential measurements. It was shown that the inversion of the negative zeta potential of the bare substrate (overcharging) occurs at the particle coverage equal to 0.15, and for larger coverages positive zeta potential values were asymptotically attained. Additionally, the desorption kinetics of the particles was investigated by the streaming potential method, which confirmed the stability of the monolayers for a broad range of pHs. It was argued that these results enable to develop an efficient method for the preparation of gold sensors exhibiting a well-controlled surface roughness and electrostatic charge comprising both negative and positive values.

Noble Metal Nanoparticles Applications: Recent Trends in Food Control

Scientific research in the nanomaterials field is constantly evolving, making it possible to develop new materials and above all to find new applications. Therefore, nanoparticles (NPs) are suitable for different applications: nanomedicine, drug delivery, sensors, optoelectronics and food control. This review explores the recent trend in food control of using noble metallic nanoparticles as determination tools. Two major uses of NPs in food control have been found: the determination of contaminants and bioactive compounds. Applications were found for the determination of mycotoxins, pesticides, drug residues, allergens, probable carcinogenic compounds, bacteria, amino acids, gluten and antioxidants. The new developed methods are competitive for their use in food control, demonstrated by their validation and application to real samples.

Modern Approaches in the Identification and Quantification of Immunogenic Peptides in Cereals by LC-MS/MS

Celiac disease (CD) is an immunogenic disorder that affects the small intestine. It is caused by the ingestion of gluten, a protein network formed by prolamins and glutelins from cereals such as wheat, barley, rye and, possibly, oats. For predisposed people, gluten presents epitopes able to stimulate T-cells causing symptoms like nausea, vomiting, diarrhea, among others unrelated to the gastrointestinal system. The only treatment for CD is to maintain a gluten-free diet, not exceeding 20 mg/kg of gluten, what is generally considered the safe amount for celiacs. Due to this context, it is very important to identify and quantify the gluten content of food products. ELISA is the most commonly used method to detect gluten traces in food. However, by detecting only prolamins, the results of ELISA tests may be underestimated. For this reason, more reliable and sensitive assays are needed to improve gluten quantification. Because of high sensitivity and the ability to detect even trace amounts of peptides in complex matrices, the most promising approaches to verify the presence of gluten peptides in food are non-immunological techniques, like liquid chromatography coupled to mass spectrometry. Different methodologies using this approach have been developed and described in the last years, ranging from non-targeted and exploratory analysis to targeted and specific methods depending on the purpose of interest. Non-targeted analyses aim to define the proteomic profile of the sample, while targeted analyses allow the search for specific peptides, making it possible to quantify them. This review aims to gather and summarize the main proteomic techniques used in the identification and quantitation of gluten peptides related to CD-activity and gluten-related allergies.

Recent progress in nanomaterial-based assay for the detection of phytotoxins in foods

Phytotoxins refers to toxic chemicals derived from plants. They include both secondary metabolites that are dose-dependently toxic and allergens that can cause anaphylactic shock in sensitive individuals. Detecting phytotoxins in foods is increasingly important. Conventional methods for detecting phytotoxins lack sufficient sensitivity and operational convenience. Nanomaterial-based determination assays show great competence in fast and accurate sensing of trace substances. In the present review, representative phytotoxin categories of alkaloids, cyanides, and proteins are discussed. Application of notable nanomaterials, e.g. carbon nanotubes, graphene oxide, magnetic nanoparticles, metal-based nanotools, and quantum dots, in specific sensing strategies to fit the physiochemical properties of the target toxins are summarized. Nanomaterials mainly play four roles in phytotoxin detection: 1) analyte enricher; 2) sensor structure mediator; 3) target recognizer or reactant; 4) signaling agent. Great achievements have been made in the detection of trace plant-derived toxins in food matrices, yet there are still challenges awaiting further investigation.

Biosensing Based on Nanoparticles for Food Allergens Detection

Food allergy is one of the major health threats for sensitized individuals all over the world and, over the years, the food industry has made significant efforts and investments to offer safe foods for allergic consumers. The analysis of the concentration of food allergen residues in processing equipment, in raw materials or in the final product, provides analytical information that can be used for risk assessment as well as to ensure that food-allergic consumers get accurate and useful information to make their food choices and purchasing decisions. The development of biosensors based on nanomaterials for applications in food analysis is a challenging area of growing interest in the last years. Research in this field requires the combined efforts of experts in very different areas including food chemistry, biotechnology or materials science. However, the outcome of such collaboration can be of significant impact on the food industry as well as for consumer’s safety. These nanobiosensing devices allow the rapid, selective, sensitive, cost-effective and, in some cases, in-field, online and real-time detection of a wide range of compounds, even in complex matrices. Moreover, they can also enable the design of novel allergen detection strategies. Herein we review the main advances in the use of nanoparticles for the development of biosensors and bioassays for allergen detection, in food samples, over the past few years. Research in this area is still in its infancy in comparison, for instance, to the application of nanobiosensors for clinical analysis. However, it will be of interest for the development of new technologies that reduce the gap between laboratory research and industrial applications.

Label-Free Detection of Gliadin in Food by Quartz Crystal Microbalance-Based Immunosensor

Gluten is a protein composite found in wheat and related grains including barley, rye, oat, and all their species and hybrids. Gluten matrix is a biomolecular network of gliadins and glutenins that contribute to the texture of pastries, breads, and pasta. Gliadins are mainly responsible for celiac disease, one of the most widespread food-related pathologies in Western world. In view of the importance of gliadin proteins, by combining the quartz crystal microbalance technology, a cheap and robust piezoelectric transducer, with the so-called photonic immobilization technique, an effective surface functionalization method that provides spatially oriented antibodies on gold substrates, we realized a sensitive and reliable biosensor for quantifying these analytes extracted from real samples in a very short time. The resulting immunosensor has a limit of detection of about 4 ppm and, more remarkably, shows excellent sensitivity in the range 7.5-15 ppm. This feature makes our device reliable and effective for practical applications since it is able to keep low the influence of false positives.

Recent Advances in the Detection of Allergens in Foods

Food allergy is a public health issue that has significantly increased worldwide in the past decade affecting consumers' quality of life and making increasing demands on health service resources. Despite recent advances in many areas of diagnosis and treatment, our general knowledge of the basic mechanisms of the disease remained limited, i.e., not at pace with the exponential number of new cases and the explosion of the new technologies. For sensitized individuals, the only effective way to prevent allergic reactions is the strict avoidance of the offending food. For this reason, a number of regulatory bodies in several countries have recognized the importance of providing information about the presence of food allergens by enacting laws, regulations, or standards for food labeling of "priority allergens." This has resulted in the need for the development of analytical methods for protection of food-allergic consumers that should be among others highly specific, sensitive, and not influenced by the presence of the food matrix components. Several analytical approaches target either the allergen itself or a corresponding allergen marker such as peptide fragment or gene segment and have been used in the detection and quantification of allergens in food products. In this short review, some of the conventional and new methods for the detection of allergens in food are listed and briefly discussed.

Nanocomposite biosensors for point-of-care—evaluation of food quality and safety

Nanosensors have wide applications in the food industry. Nanosensors based on quantum dots for heavy metal and organophosphate pesticides detection, and nanocomposites as indicators for shelf life of fish/meat products, have served as important tools for food quality and safety assessment. Luminescent labels consisting of NPs conjugated to aptamers have been popular for rapid detection of infectious and foodborne pathogens. Various detection technologies, including microelectromechanical systems for gas analytes, microarrays for genetically modified foods, and label-free nanosensors using nanowires, microcantilevers, and resonators are being applied extensively in the food industry. An interesting aspect of nanosensors has also been in the development of the electronic nose and electronic tongue for assessing organoleptic qualities, such as, odor and taste of food products. Real-time monitoring of food products for rapid screening, counterfeiting, and tracking has boosted ingenious, intelligent, and innovative packaging of food products. This chapter will give an overview of the contribution of nanotechnology-based biosensors in the food industry, ongoing research, technology advancements, regulatory guidelines, future challenges, and industrial outlook.

Improved Quantitation of Gluten in Wheat Starch for Celiac Disease Patients by Gel-Permeation High-Performance Liquid Chromatography with Fluorescence Detection (GP-HPLC-FLD)

Purified wheat starch (WSt) is commonly used in gluten-free products for celiac disease (CD) patients. It is mostly well-tolerated, but doubts about its safety for CD patients persist. One reason may be that most ELISA kits primarily recognize the alcohol-soluble gliadin fraction of gluten, but insufficiently target the alcohol-insoluble glutenin fraction. To address this problem, a new sensitive method based on the sequential extraction of gliadins, glutenins, and gluten from WSt followed by gel-permeation high-performance liquid chromatography with fluorescence detection (GP-HPLC-FLD) was developed. It revealed that considerable amounts of glutenins were present in most WSt. The gluten contents quantitated by GP-HPLC-FLD as sum of gliadins and glutenins were higher than those by R5 ELISA (gluten as gliadin content multiplied by a factor of 2) in 19 out of 26 WSt. Despite its limited selectivity, GP-HPLC-FLD may be applied as confirmatory method to ELISA to quantitate gluten in WSt.

A label-free electrochemical aptasensor based on graphene oxide/double-stranded DNA nanocomposite

A novel label-free electrochemical impedance aptasensor based on a gold nanoparticles/double-stranded DNA-graphene (AuNPs/dsDNA-GO) nanocomposite modified glassy carbon electrode was presented for quantitative determination of thrombin. GO was covalently functionalized with dsDNA via a facile amidation process, and then AuNPs were electrodeposited onto the surface of dsDNA-GO. The morphology, conductivity and interaction of the as-prepared nanocomposites were characterized by scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy (EIS), Raman and Fourier transform infrared spectroscopy. The thrombin-binding aptamer (TBA) was conjugated to AuNPs via gold-thiol chemistry to construct electrochemical aptasensing platform, and the specific recognition between TBA and thrombin was monitored by EIS. Under optimum conditions, thrombin could be quantified in a wide range of 0.1-100nM (R(2)=0.9960) with low detection limit of 0.06nM (S/N=3).

Quartz-Crystal Microbalance (QCM) for Public Health: An Overview of Its Applications

Nanobiotechnologies, from the convergence of nanotechnology and molecular biology and postgenomics medicine, play a major role in the field of public health. This overview summarizes the potentiality of piezoelectric sensors, and in particular, of quartz-crystal microbalance (QCM), a physical nanogram-sensitive device. QCM enables the rapid, real time, on-site detection of pathogens with an enormous burden in public health, such as influenza and other respiratory viruses, hepatitis B virus (HBV), and drug-resistant bacteria, among others. Further, it allows to detect food allergens, food-borne pathogens, such as Escherichia coli and Salmonella typhimurium, and food chemical contaminants, as well as water-borne microorganisms and environmental contaminants. Moreover, QCM holds promises in early cancer detection and screening of new antiblastic drugs. Applications for monitoring biohazards, for assuring homeland security, and preventing bioterrorism are also discussed.

Multiplex liquid chromatography-tandem mass spectrometry for the detection of wheat, oat, barley and rye prolamins towards the assessment of gluten-free product safety

Celiac patients should feel confident in the safety of foods labelled or expected to be gluten-free. In this context, a targeted proteomic approach based on liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) technique was proposed to assess the presence of celiotoxic cereals, namely wheat, oats, barley and rye, in raw and processed food products. To this aim, unique marker peptides were properly selected in order to distinguish between the different cereal types. A revised cocktail solution based on reducing and denaturing agents was exploited for prolamin extraction from raw and processed food; in addition, defatting with hexane was carried out for sample clean-up, allowing to largely reduce problems related to matrix effect. Method validation on fortified rice flour showed good analytical performance in terms of sensitivity (limits of detection in the 2-18 mg kg(-1) range). However, poor trueness was calculated for self-made incurred bread (between 3 and 30% depending on the peptide), probably due to baking processes, which reduce gluten extractability. Thus, it is evident that in the case of processed foods further insights into sample treatment efficiency and reference materials for protein calibration are required to obtain accurate gluten determination. Finally, the developed method was applied for the analysis of market food products, offering the possibility to discriminate among cereals, with good agreement with labelled ingredients for gluten-containing foodstuffs.

Portable gliadin-immunochip for contamination control on the food production chain

Celiac disease (CD) is one of the most common digestive disorders caused by an abnormal immune reaction to gluten. So far there are no available therapies, the only solution is a strict gluten-free diet, which however could be very challenging as gluten can be hidden in many food products. Furthermore an additional problem is related to cross-contamination of nominal gluten-free foods with gluten-based ones during manufacturing. Here we propose a lab on chip platform as a powerful tool to help food manufacturers to evaluate the real amount of gluten in their products by an accurate in-situ control of the production chain and maybe to specify the real gluten content in packages labeling. Our portable gliadin-immunochips, based on an electrochemical impedance spectroscopy transduction method, were first calibrated and then validated for both liquid and solid food matrixes by analyzing different beers and flours. The high specificity of our assay was also demonstrated by performing control experiments on rice and potatoes flours containing prolamin-like proteins. We achieved limit of quantification of 0.5 ppm for gliadin that is 20 times lower than the worldwide limit established for gluten-free food while the method of analysis is faster and cheaper than currently employed ELISA-based methods. Moreover our results on food samples were validated through a mass spectrometry standard analysis.

A novel electrochemical sensor for the analysis of β-agonists: the poly(acid chrome blue K)/graphene oxide-nafion/glassy carbon electrode

A novel modified electrode was constructed by the electro-polymerization of 4,5-dihydroxy-3-[(2-hydroxy-5-sulfophenyl)azo]-2,7-naphthalenedisulfonic acid trisodium salt (acid chrome blue K (ACBK)) at a graphene oxide (GO)-nafion modified glassy carbon electrode (GCE). The characterization of an electrochemically synthesized poly-ACBK/GO-nafion film was investigated by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), atomic force microscopy (AFM) and scanning electron microscopy (SEM) techniques, and the results were interpreted and compared at each stage of the electrode construction. Electrochemical oxidation of eight β-agonists - clenbuterol, salbutamol, terbutaline, ractopamine, dopamine, dobutamine, adrenaline, and isoprenaline, was investigated by CV at the different electrodes. At the poly-ACBK/GO-nafion/GCE, the linear sweep voltammetry peak currents of the eight β-agonists increased linearly with their concentrations in the range of 1.0-36.0 ng mL(-1), respectively, and their corresponding limits of detection (LODs) were within the 0.58-1.46 ng mL(-1) range. This electrode showed satisfactory reproducibility and stability, and was used successfully for the quantitative analysis of clenbuterol in pork samples.

Displacement-type quartz crystal microbalance immunosensing platform for ultrasensitive monitoring of small molecular toxins

A novel displacement-type quartz crystal microbalance (QCM) immunosensing strategy, based on glucose and its analogue dextran for concanavalin A (ConA) binding sites, was designed for ultrasensitive monitoring of small molecular biotoxins (brevetoxin B, PbTx-2, used as a model) with signal amplification on a graphene-functionalized sensing interface. To construct such a QCM immunosensing platform, phenoxy-functionalized dextran (DexP) was initially assembled onto the surface of graphene-coated QCM probe via the π-stacking interaction, and ConA-labeled monoclonal mouse anti-PbTx-2 capture antibody was then immobilized on the DexP-modified probe by dextran-ConA binding. Gold nanoparticle heavily functionalized with glucoamylase and bovine serum albumin-PbTx-2 (PbTx-2-BSA) conjugate was employed as the trace tag. A competitive-type immunoassay format was adopted for the online monitoring of PbTx-2 between anti-PbTx-2 antibody immobilized on the QCM probe and PbTx-2-BSA labeled on the gold nanoparticle. Accompanying the gold nanoparticle, the carried glucoamylase could hydrolyze amylopectin in glucose. The produced glucose competed with dextran for ConA and displaced the ConA-streptavidin-anti-PbTx-2 complex from the QCM probe, resulting in the frequency change. Under optimal conditions, the frequency of the QCM immunosensor was indirectly proportional to the concentration of target PbTx-2 in the sample and exhibited a dynamic range from 1.0 pg·mL(-1) to 10 ng·mL(-1) with a detection limit (LOD) of 0.6 pg·mL(-1) at the 3Sblank level. Intra- and interassay coefficients of variation were below 7.5% and 9.5%, respectively. In addition, the methodology was evaluated for analysis of PbTx-2 in 15 spiked seafood samples and showed good accordance between results obtained by the displacement-type QCM immunosensor and a commercialized enzyme-linked immunosorbent assay (ELISA) method.

Sensitive detection and quantification of gliadin contamination in gluten-free food with immunomagnetic beads based liposomal fluorescence immunoassay

Gliadin from wheat is a common food allergen that can induce baker's asthma, wheat-dependent exercise-induced anaphylaxis, atopic dermatitis, and celiac disease. This gliadin assay focuses on rapidly screen and check for gluten contamination in raw materials and in the gluten-free food production process, not only for wheat-sensitive patients but also for the industries producing gluten-free foodstuffs. The developed assay incorporates the use of anti-gliadin antibody-conjugated immunomagnetic beads (IMBs) to capture the gliadin in samples and fluorescent dyes-loaded immunoliposomal nanovesicles (IMLNs) to produce and enhance the detection signal. Hence, a sandwich complex is formed as "IMBs-gliadin-IMLNs". Experimental results indicate that this detection platform exhibits good sensitivity for gliadin with a detection limit as low as 0.6 μg mL(-1) of gliadin; as the polyclonal antibody showed slight cross-reactions with barley and rye. Excellent recovery rates were found ranging from 83.5 to 102.6% as testing the spiked samples. Moreover, the CV (%) of intra- and inter-assay of this developed assay are 4.8-10.6% and 3.5-9.9%, respectively. Based on a parallel analysis of twenty food samples, the results of this developed assay provide a good consistency with those of an AOAC-approved ELISA kit without any false-negative results. The proposed assay method is thus a highly promising alternative method for detecting the contamination of gliadin in the food industry.

Novel amperometric aptasensor based on analyte-induced suppression of enzyme catalysis in polymeric bionanocomposites

We report on a novel label-free biosensing interface based on multifunctional polymeric bionanocomposites (PBNCs) and its application for sensitive detection of protein based on the analyte-induced suppression of enzymatic catalysis in PBNCs. Thrombin and its aptamer are adopted as a model system to construct an amperometric aptasensor. First, polydopamine-based PBNCs with glucose oxidase (GOx) entrapped at high load/activity and Au nanoparticles (AuNPs) dispersed in high abundance on the surface were prepared through a chemical/biochemical synthesis method, as proven by UV-vis spectrophotometry, digital imaging, and transmission electron microscopy. Then, the PBNCs were cast-coated onto an Au electrode. The PBNC-modified Au electrode presented a high chronoamperometric sensitivity of 113 ± 2 μA cm(-2) mM(-1) to glucose, as well as a high capability of immobilizing the aptamer through the surficial AuNPs to fabricate a label-free aptasensing interface. The binding of thrombin to the aptasensor surface significantly hindered the mass-transfer of the enzymatic substrates/products and thus suppressed the enzymatic catalysis efficiency, which produced obvious signal change through measuring the electrooxidation of enzymatically generated H(2)O(2). The thus-prepared aptasensor could detect thrombin with a broad detection range (1-100 nM), a detection limit down to 0.1 nM, and satisfactory specificity. The developed aptasensing method may find broad applications in the fields of clinical diagnosis, environmental protection, and food safety.