Surface Restructuring of Nanoparticles: An Efficient Route for Ligand−Metal Oxide Crosstalk

Acetylacetonate-modified TiO2 nanoparticles coated on the carbon felt as the negative electrode of vanadium redox flow battery for reducing HER and enhancing V3+/V2+ redox reactions

The occurrence of the hydrogen evolution reaction (HER) on the surface of the carbon-based negative electrode of the vanadium redox flow battery (VRFB) causes high charge transfer resistance (RCT) for the desired V3+/V2+ redox reaction leading to irreversible capacity loss. To this effect, we have synthesized acetylacetonate-modified TiO2 (SGTA) and unmodified TiO2 (SGT) coating colloidal solutions as electrocatalysts for enhanced V3+/V2+ redox reaction on the carbon-felt negative electrodes of VRFB. The SGTA particles exhibit significantly higher homogeneity with sizes of ≤15 nm, in comparison to the severely aggregated SGT particles with diameters of ∼23-75 nm in colloidal solution. When coated on the pristine carbon felt (P-CF), the surface morphology of the SGTA@CF electrode exhibits relatively dense, uniformly coated particles, in comparison to the sparse, non-even coating of aggregated particles on the SGT@CF electrode surface. Consequently, the charge transfer for V3+ → V2+ reduction reaction and charge storage capacity are determined to be in the order SGTA@CF > SGT@CF > P-CF, confirming that the competitive and irreversible HER was higher on the surface of non-evenly coated fibers and bare carbon felt, respectively.

Bioactive peptides from food waste: New innovative bio-nanocomplexes to enhance cellular uptake and biological effects

Mastitis is the most important bovine disease, causing dramatic economic losses to the dairy industry, worldwide. This study explores the valorization of whey from cows affected by mastitis, through a novel separation approach. Surface Active Maghemite Nanoparticles (SAMNs) were used as magnetic baits to selectively bind bioactive peptides with potential health benefits. Advanced techniques such as HPLC and LC-MS/MS highlighted SAMN capability of isolating a restricted group of peptides, drastically diverging from the control profile (Solid Phase Extraction, SPE) and characterized by a peculiar acidic residue distribution. Most importantly, both magnetically purified and nano-immobilized peptides (SAMN@peptides) showed protective activity against oxidative stress and inflammation, when tested on Caco-2 cells; with SAMN@peptides being associated with the strongest biological effect. SAMNs exhibited excellent characteristics, they are environmentally sustainable, and their synthesis is cost-effective prompting at a scalable and selective tool for capturing bioactive peptides, with potential applications in functional foods and nutraceuticals.

Engineered food-derived hesperetin as heterojunction photosensitizer for inhibiting Staphylococcus aureus and degrading patulin, and its application in perishable strawberries

The potential contamination, including microbial and mycotoxin infection, may escape from the naked eye, posing great threats to food products. Recently, photodynamic inactivation (PDI)-based technology particular has received particular attention because of their high safety. Herein, food-derived hesperetin (Hst) was innovatively introduced as an esculent photosensitizer, engineering with food-grade TiO2 nanoparticles (NPs) to form an organic-inorganic heterojunction structure. Triggered by visible light, the obtained TiO2/Hst NPs were endowed with efficient photoactivity, achieving higher inhibition of Staphylococcus aureus (antibacterial ratio of 98.3 %). The removal capacities of the TiO2/Hst NPs towards patulin (PAT) reached approximately 17.76 μg mg-1, approximately 2 times higher than TiO2 and Hst. The engineered TiO2/Hst NPs were used as the food surface detergent to achieve the ideal inhibition of Staphylococcus aureus and patulin performance on the surface of perishable strawberries, extending the storage life of strawberries.

Synthesis of TiO2 nanoparticles by the solvothermal method and application in the catalysis of esterification reactions

TiO2 nanoparticles have numerous applications, prompting extensive efforts to optimize their synthesis for various technologies. This study synthesized TiO2 nanoparticles via the solvothermal method, using a chemometric approach to vary time, temperature, and concentrations of both the precursor and crystallization agent, aiming to understand these variables' effects on crystallite size. Post-synthesis, a sample underwent treatment for sulfate adsorption to alter surface properties from hydrophobic to hydrophilic. Characterization techniques included X-ray diffraction (XRD), infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The results indicated the formation of crystalline anatase phase nanoparticles, with particle sizes ranging from 25 to 38 nm and crystallite sizes from 8 to 10 nm. Sulfation was confirmed via FTIR, and SEM revealed particle agglomeration. Catalytic performance was assessed through esterification reactions, with two analyses: one comparing nanoparticles with and without surface modification, and the other examining the effects of variables like time, catalyst amount, and temperature on product formation. Sulfated samples exhibited excellent catalytic performance, achieving 60% conversion after 2 hours at 50 °C. Pure TiO2 samples also showed good conversion rates when synthesized at higher temperatures and Ti4+ concentrations.

Photocatalysis of Adsorbed Catechol on Degussa P25 TiO2 at the Air-Solid Interface

Semiconductor photocatalysis with commercial TiO2 (Degussa P25) has shown significant potential in water treatment of organic pollutants. However, the photoinduced reactions of adsorbed catechol, a phenolic air pollutant from biomass burning and combustion emissions, at the air-solid interface of TiO2 remain unexplored. Herein we examine the photocatalytic decay of catechol in the presence of water vapor, which acts as an electron acceptor. Experiments under variable cut-off wavelengths of irradiation (λcut-off ≥ 320, 400, and 515 nm) distinguish the mechanistic contribution of a ligand-to-metal charge-transfer (LMCT) complex of surface chemisorbed catechol on TiO2. The LMCT complex injects electrons into the conduction band of TiO2 from the highest occupied molecular orbital of catechol by visible light (≥2.11 eV) excitation. The deconvolution of diffuse reflectance UV-visible spectral bands from LMCT complexes of TiO2 with catechol, o-semiquinone radical, and quinone and the quantification of the evolving gaseous products follow a consecutive kinetic model. CO2(g) and CO(g) final oxidation products are monitored by gas chromatography and Fourier-transform infrared spectroscopy. The apparent quantum efficiency at variable λcut-off are determined for reactant loss (Φ- TiO2/catechol = 0.79 ± 0.19) and product growth ΦCO2 = 0.76 ± 0.08). Spectroscopic and electrochemical measurements reveal the energy band diagram for the LMCT of TiO2/catechol. Two photocatalytic mechanisms are analyzed based on chemical transformations and environmental relevance.

Interactions between prokaryotic polysaccharides and colloidal magnetic nanoparticles for bacteria removal: A strategy for circumventing antibiotic resistance

Highly stable, colloidal iron oxide nanoparticles with an oxyhydroxide-like surface were used as bacteria-capturing nano-baits. Peptidoglycan isolated from Listeria spp was used as bacteria polysaccharide model, and the nanoparticle binding was characterized showing a Langmuir isotherm constant, KL, equal to 50 ± 3 mL mg-1. The chemical affinity was further supported by dynamic light scattering, transmission electron microscopy, and infrared and UV-Vis data, pointing at the occurrence of extended, coordinative multiple point bindings. The interaction with Gram (+) (Listeria spp) and Gram (-) (Aeromonas veronii) bacteria was shown to be effective and devoid of any toxic effect. Moreover, a real sample, containing a population of several oligotrophic bacteria strains, was incubated with 1 g L-1 of nanoparticle suspension, in the absence of agitation, showing a 100 % capture efficiency, according to plate count. A nanoparticle regeneration method was developed, despite the known irreversibility of such bacterial-nanosurface binding, restoring the bacteria capture capability. This nanomaterial represents a competitive option to eliminate microbiological contamination in water as an alternative strategy to antibiotics, aimed at reducing microbial resistance dissemination. Finally, beyond their excellent features in terms of colloidal stability, binding performances, and biocompatibility this nanoparticle synthesis is cost effective, scalable, and environmentally sustainable.

Interfacial charge-transfer transitions enable photovoltaic conversion with CO2-fixation products

We demonstrate that organic-inorganic interfacial charge-transfer transitions enable favourable photovoltaic conversion with CO2-fixation products such as aromatic carboxylic acids, verifying a new possibility of CO2-fixation products in the development of optoelectronic conversion materials.

Multiple valence states of Fe boosting SERS activity of Fe3O4 nanoparticles and enabling effective SERS-MRI bimodal cancer imaging

Developing novel nanoparticle-based bioprobes utilized in clinical settings with imaging resolutions ranging from cell to tissue levels is a major challenge for tumor diagnosis and treatment. Herein, an optimized strategy for designing a Fe3O4-based bioprobe for dual-modal cancer imaging based on surface-enhanced Raman scattering (SERS) and magnetic resonance imaging (MRI) is introduced. Excellent SERS activity of ultrasmall Fe3O4 nanoparticles (NPs) was discovered, and a 5 × 10-9 M limit of detection for crystal violet molecules was successfully obtained. The high-efficiency interfacial photon-induced charge transfer in Fe3O4 NPs was promoted by multiple electronic energy levels ascribed to the multiple valence states of Fe, which was observed using ultraviolet-visible diffuse reflectance spectroscopy. Density functional theory calculations were utilized to reveal that the narrow band gap and high electron density of states of ultrasmall Fe3O4 NPs significantly boosted the vibronic coupling resonances in the SERS system upon illumination. The subtypes of cancer cells were accurately recognized via high-resolution SERS imaging in vitro using the prepared Fe3O4-based bioprobe with high sensitivity and good specificity. Notably, Fe3O4-based bioprobes simultaneously exhibited T1 -weighted MRI contrast enhancement with an active targeting capability for tumors in vivo. To the best of our knowledge, this is the first report on the use of pure semiconductor-based SERS-MRI dual-modal nanoprobes in tumor imaging in vivo and in vitro, which has been previously realized only using semiconductor-metal complex materials. The non-metallic materials with SERS-MRI dual-modal imaging established in this report are a promising cancer diagnostic platform, which not only showed excellent performance in early tumor diagnosis but also possesses great potential for image-guided tumor treatment.

Deciphering Photoinduced Catalytic Reaction Mechanisms in Natural and Artificial Photosynthetic Systems on Multiple Temporal and Spatial Scales Using X-ray Probes

Utilization of renewable energies for catalytically generating value-added chemicals is highly desirable in this era of rising energy demands and climate change impacts. Artificial photosynthetic systems or photocatalysts utilize light to convert abundant CO2, H2O, and O2 to fuels, such as carbohydrates and hydrogen, thus converting light energy to storable chemical resources. The emergence of intense X-ray pulses from synchrotrons, ultrafast X-ray pulses from X-ray free electron lasers, and table-top laser-driven sources over the past decades opens new frontiers in deciphering photoinduced catalytic reaction mechanisms on the multiple temporal and spatial scales. Operando X-ray spectroscopic methods offer a new set of electronic transitions in probing the oxidation states, coordinating geometry, and spin states of the metal catalytic center and photosensitizers with unprecedented energy and time resolution. Operando X-ray scattering methods enable previously elusive reaction steps to be characterized on different length scales and time scales. The methodological progress and their application examples collected in this review will offer a glimpse into the accomplishments and current state in deciphering reaction mechanisms for both natural and synthetic systems. Looking forward, there are still many challenges and opportunities at the frontier of catalytic research that will require further advancement of the characterization techniques.

Dopamine Sulfonate Ligand-Assisted TiO2 Deposition Enabling Highly Efficient and Stable Perovskite Solar Cells

The metal oxide electron transport layers (ETLs) with flat morphology and high electrical quality are essential to manufacture highly efficient perovskite solar cells (PSCs), in which the regulation of the metal oxide deposition process plays a crucial role. Herein, a judiciously designed dopamine sulfonate (DS) ligand-assisted deposition of titanium dioxide (TiO2) films approach is implemented based on electrostatic repulsion and steric hindrance of assembled ligands to improve colloidal nanoparticles dispersity in precursor and effectively inhibit their aggregation, which could enable obtaining smooth topography of TiO2 films and initiating growth of top high-quality perovskite films. Furthermore, sulfonate bridges bonded on the perovskite buried layer that is beneficial to form better buried interface contact and accelerate electron extraction. As a result, the PSCs employing DS/TiO2 ETLs exhibit the best power conversion efficiency of 24.53% with impressive storage stability and operation stability, i.e., remaining more than 88% of their initial efficiency upon storage N2 glovebox without encapsulation over 4000 h, and the efficiency does not attenuate significantly under maximum power point for 60 h.

Spermine Oxidase-Substrate Electrostatic Interactions: The Modulation of Enzyme Function by Neighboring Colloidal ɣ-Fe2O3

Protein-nanoparticle hybridization can ideally lead to novel biological entities characterized by emerging properties that can sensibly differ from those of the parent components. Herein, the effect of ionic strength on the biological functions of recombinant His-tagged spermine oxidase (i.e., SMOX) was studied for the first time. Moreover, SMOX was integrated into colloidal surface active maghemite nanoparticles (SAMNs) via direct self-assembly, leading to a biologically active nano-enzyme (i.e., SAMN@SMOX). The hybrid was subjected to an in-depth chemical-physical characterization, highlighting the fact that the protein structure was perfectly preserved. The catalytic activity of the nanostructured hybrid (SAMN@SMOX) was assessed by extracting the kinetics parameters using spermine as a substrate and compared to the soluble enzyme as a function of ionic strength. The results revealed that the catalytic function was dominated by electrostatic interactions and that they were drastically modified upon hybridization with colloidal ɣ-Fe2O3. The fact that the affinity of SMOX toward spermine was significantly higher for the nanohybrid at low salinity is noteworthy. The present study supports the vision of using protein-nanoparticle conjugation as a means to modulate biological functions.

The Influence of Catechols on the Magnetization of Iron Oxide Nanoparticles

In this study, MNPs were functionalized with pyrocatechol (CAT), pyrogallol (GAL), caffeic acid (CAF), and nitrodopamine (NDA) at pH 8 and pH 11. The functionalization of the MNPs was successful, except in the case of NDA at pH 11. The thermogravimetric analyses indicated that the surface concentration of the catechols was between 1.5 and 3.6 molecules/nm². The saturation magnetizations (M_s) of the functionalized MNPs were higher than the starting material. XPS analyses showed only the presence of Fe(III) ions on the surface, thus refuting the idea of the Fe being reduced and magnetite being formed on the surfaces of the MNPs. Density functional theory (DFT) calculations were performed for two modes of adsorption of CAT onto two model surfaces: plain and adsorption via condensation. The total magnetization of both adsorption modes remained the same, indicating that the adsorption of the catechols does not affect the M_s. The analyses of the size and the size distribution showed an increase in the average size of the MNPs during the functionalization process. This increase in the average size of the MNPs and the reduction in the fraction of the smallest (i.e., <10 nm) MNPs explained the increase in the M_s values.

A Recognition-Molecule-Free Photoelectrochemical Sensor Based on Ti3C2/TiO2 Heterostructure for Monitoring of Dopamine

Herein, a novel, recognition-molecule-free electrode based on Ti₃C₂/TiO₂ composites was synthesized using Ti₃C₂ as the Ti source and TiO₂ in situ formed by oxidation on the Ti₃C₂ surface for the selective detection of dopamine (DA). The TiO₂ in situ formed by oxidation on the Ti₃C₂ surface not only increased the catalytically active surface for DA binding but also accelerated the carrier transfer due to the coupling between TiO₂ and Ti₃C₂, resulting in a better photoelectric response than pure TiO₂. Through a series of experimental conditions optimization, the photocurrent signals obtained by the MT100 electrode were proportional to the DA concentration from 0.125 to 400 µM, with a detection limit estimated at 0.045 µM. We also monitored DA in human blood serum samples using the MT100 electrode. The results showed good recovery, demonstrating the promising use of the sensor for the analysis of DA in real samples.

Toward a New Era of SERS and TERS at the Nanometer Scale: From Fundamentals to Innovative Applications

Surface-enhanced Raman scattering (SERS) and tip-enhanced Raman scattering (TERS) have opened a variety of exciting research fields. However, although a vast number of applications have been proposed since the two techniques were first reported, none has been applied to real practical use. This calls for an update in the recent fundamental and application studies of SERS and TERS. Thus, the goals and scope of this review are to report new directions and perspectives of SERS and TERS, mainly from the viewpoint of combining their mechanism and application studies. Regarding the recent progress in SERS and TERS, this review discusses four main topics: (1) nanometer to subnanometer plasmonic hotspots for SERS; (2) Ångström resolved TERS; (3) chemical mechanisms, i.e., charge-transfer mechanism of SERS and semiconductor-enhanced Raman scattering; and (4) the creation of a strong bridge between the mechanism studies and applications.

Stable Cuprous Hydroxide Nanostructures by Organic Ligand Functionalization

Copper compounds have been extensively investigated for diverse applications. However, studies of cuprous hydroxide (CuOH) have been scarce due to structural metastability. Herein, a facile, wet-chemistry procedure is reported for the preparation of stable CuOH nanostructures via deliberate functionalization with select organic ligands, such as acetylene and mercapto derivatives. The resulting nanostructures are found to exhibit a nanoribbon morphology consisting of small nanocrystals embedded within a largely amorphous nanosheet-like scaffold. The acetylene derivatives are found to anchor onto the CuOH forming CuC linkages, whereas CuS interfacial bonds are formed with the mercapto ligands. Effective electronic coupling occurs at the ligand-core interface in the former, in contrast to mostly non-conjugated interfacial bonds in the latter, as manifested in spectroscopic measurements and confirmed in theoretical studies based on first principles calculations. Notably, the acetylene-capped CuOH nanostructures exhibit markedly enhanced photodynamic activity in the inhibition of bacteria growth, as compared to the mercapto-capped counterparts due to a reduced material bandgap and effective photocatalytic generation of reactive oxygen species. Results from this study demonstrate that deliberate structural engineering with select organic ligands is an effective strategy in the stabilization and functionalization of CuOH nanostructures, a critical first step in exploring their diverse applications.

Titanium(IV) Surface Complexes Bearing Chelating Catecholato Ligands for Enhanced Band-Gap Reduction

Protonolysis reactions between dimethylamido titanium(IV) catecholate [Ti(CAT)(NMe₂)₂]₂ and neopentanol or tris(tert-butoxy)silanol gave catecholato-bridged dimers [(Ti(CAT)(OCH₂tBu)₂)(HNMe₂)]₂ and [Ti(CAT){OSi(OtBu)₃}₂(HNMe₂)₂]₂, respectively. Analogous reactions using the dimeric dimethylamido titanium(IV) (3,6-di-tert-butyl)catecholate [Ti(CATtBu₂-3,6)(NMe₂)₂]₂ yielded the monomeric Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂ and Ti(CATtBu₂-3,6)[OSi(OtBu)₃]₂(HNMe₂)₂. The neopentoxide complex Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂ engaged in further protonolysis reactions with Si-OH groups and was consequentially used for grafting onto mesoporous silica KIT-6. Upon immobilization, the surface complex [Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂]@[KIT-6] retained the bidentate chelating geometry of the catecholato ligand. This convergent grafting strategy was compared with a sequential and an aqueous approach, which gave either a mixture of bidentate chelating species with a bipodally anchored Ti(IV) center along with other physisorbed surface species or not clearly identifiable surface species. Extension of the convergent and aqueous approaches to anatase mesoporous titania (m-TiO₂) enabled optical and electronic investigations of the corresponding surface species, revealing that the band-gap reduction is more pronounced for the bidentate chelating species (convergent approach) than for that obtained via the aqueous approach. The applied methods include X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, and solid-state UV/vis spectroscopy. The energy-level alignment for the surface species from the aqueous approach, calculated from experimental data, accounts for the well-known type II excitation mechanism, whereas the findings indicate a distinct excitation mechanism for the bidentate chelating surface species of the material [Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂]@[m-TiO₂].

Triggering cell death in cancers using self-illuminating nanocomposites

Bioinspired photocatalysis has resulted in efficient solutions for many areas of science and technology spanning from solar cells to medicine. Here we show a new bioinspired semiconductor nanocomposite (nanoTiO₂-DOPA-luciferase, TiDoL) capable of converting light energy within cancerous tissues into chemical species that are highly disruptive to cell metabolism and lead to cell death. This localized activity of semiconductor nanocomposites is triggered by cancer-generated activators. Adenosine triphosphate (ATP) is produced in excess in cancer tissues only and activates nearby immobilized TiDoL composites, thereby eliminating its off-target toxicity. The interaction of TiDoL with cancerous cells was probed in situ and in real-time to establish a detailed mechanism of nanoparticle activation, triggering of the apoptotic signaling cascade, and finally, cancer cell death. Activation of TiDoL with non-cancerous cells did not result in cell toxicity. Exploring the activation of antibody-targeted semiconductor conjugates using ATP is a step toward a universal approach to single-cell-targeted medical therapies with more precision, efficacy, and potentially fewer side effects.

Enhanced Water Resistance and Catalytic Performance of Ru/TiO2 by Regulating Brønsted Acid and Oxygen Vacancy for the Oxidative Removal of 1,2-Dichloroethane and Toluene

The compositions of volatile organic compounds (VOCs) under actual industrial conditions are often complex; especially, the interaction of intermediate products easily leads to more toxic emissions that are harmful to the atmospheric environment and human health. Herein, we report a comparative investigation on 1,2-dichloroethane (1,2-DCE) and (1,2-DCE + toluene) oxidation over the Ru/TiO₂, phosphotungstic acid (HPW)-modified Ru/TiO₂, and oxygen vacancy-rich Ru/TiO_x catalysts. The doping of HPW successfully introduced the 1,2-DCE adsorption sites to promote its oxidation and exhibited outstanding water resistance. For the mixed VOCs, Ru/HPW-TiO₂ promoted the preferential and superfluous adsorption of toluene and resulted in the inhibition of 1,2-DCE degradation. Therefore, HPW modification is a successful strategy in catalytic 1,2-DCE oxidation, but Brønsted acid sites tend to adsorb toluene in the mixed VOC oxidation. The Ru/TiO_x catalyst exhibited excellent activity and stability in the oxidation of mixed VOCs and could inhibit the generation of byproducts and Cl₂ compared with the Ru/HPW-TiO₂ catalyst. Compared with the Brønsted acid modification, the oxygen vacancy-rich catalysts are significantly suitable for the oxidation of multicomponent VOCs.

Application of Nanostructured TiO2 in UV Photodetectors: A Review

As a wide-bandgap semiconductor material, titanium dioxide (TiO₂ ), which possesses three crystal polymorphs (i.e., rutile, anatase, and brookite), has gained tremendous attention as a cutting-edge material for application in the environment and energy fields. Based on the strong attractiveness from its advantages such as high stability, excellent photoelectric properties, and low-cost fabrication, the construction of high-performance photodetectors (PDs) based on TiO₂ nanostructures is being extensively developed. An elaborate microtopography and device configuration is the most widely used strategy to achieve efficient TiO₂ -based PDs with high photoelectric performances; however, a deep understanding of all the key parameters that influence the behavior of photon-generated carriers, is also highly required to achieve improved photoelectric performances, as well as their ultimate functional applications. Herein, an in-depth illustration of the electrical and optical properties of TiO₂ nanostructures in addition to the advances in the technological issues such as preparation, microdefects, p-type doping, bandgap engineering, heterojunctions, and functional applications are presented. Finally, a future outlook for TiO₂ -based PDs, particularly that of further functional applications is provided. This work will systematically illustrate the fundamentals of TiO₂ and shed light on the preparation of more efficient TiO₂ nanostructures and heterojunctions for future photoelectric applications.

Synthesis, modification and application of titanium dioxide nanoparticles: a review

Titanium dioxide (TiO₂) has been heavily investigated owing to its low cost, benign nature and strong photocatalytic ability. Thus, TiO₂ has broad applications including photocatalysts, Li-ion batteries, solar cells, medical research and so on. However, the performance of TiO₂ is not satisfactory due to many factors such as the broad band gap (3.01 to 3.2 eV) and fast recombination of electron-hole pairs (10^-12 to 10^-11 s). Plenty of work has been undertaken to improve the properties, such as structural and dopant modifications, which broaden the applications of TiO₂. This review mainly discusses the aspects of TiO₂-modified nanoparticles including synthetic methods, modifications and applications.

Photocatalytic oxidation of Mn(II) on the surface of Bi2.15WO6via the ligand-to-metal charge transfer (LMCT) pathway

Biotic and abiotic oxidation of Mn(II) in aqueous environments is an important process for the cycling of many elements. However, the mechanism involved in photocatalytic oxidation of Mn(II) has not been clearly elucidated yet. In this study, the photocatalytic oxidation of Mn(II) on the surface of self-doped Bi_2+xWO₆ (Bi_2.15WO₆) under visible light was conducted. Kinetics results show that visible light apparently accelerates the oxidation of Mn(II) to Mn(III, IV) oxides on Bi_2.15WO₆. The average oxidation states (AOS) of manganese reach 2.18 after 80 min of reaction under visible light at pH 8.50. Characterizations indicate the formation of Bi(III)-O-Mn(II) surface complexes between Mn(II) and surface Bi(III) on Bi_2.15WO₆, which then decreases the bandgap of [Bi_2.15WO₆ + Mn(II)]_light (2.53 eV) compared with those of [Bi_2.15WO₆ + Mn(II)]_dark (2.72 eV) and pure Bi_2.15WO₆ (2.86 eV), suggesting the contribution of the ligand-to-metal charge transfer (LMCT) pathway to the photocatalytic oxidation of Mn(II). Moreover, the addition of inorganic oxidants with strong oxidizing capacities (such as Cr₂O₇^2-, NO₃^- or NO₂^-) significantly increases the oxidation rate of Mn(II), further verifying the contribution of the LMCT pathway to Mn(II) oxidation. We therefore suggest that the LMCT pathway is one of the important oxidation routes for Mn(II) oxidation on Bi_2.15WO₆ under visible light.

Size-Dependent Properties of Solution-Processable Conductive MOF Nanocrystals

The diverse optical, magnetic, and electronic behaviors of most colloidal semiconductor nanocrystals emerge from materials with limited structural and elemental compositions. Conductive metal-organic frameworks (MOFs) possess rich compositions with complex architectures but remain unexplored as nanocrystals, hindering their incorporation into scalable devices. Here, we report the controllable synthesis of conductive MOF nanoparticles based on Fe(1,2,3-triazolate)₂. Sizes can be tuned to as small as 5.5 nm, ensuring indefinite colloidal stability. These solution-processable MOFs can be analyzed by solution-state spectroscopy and electrochemistry and cast into conductive thin films with excellent uniformity. This unprecedented analysis of MOF materials reveals a strong size dependence in optical and electronic behaviors sensitive to the intrinsic porosity and guest-host interactions of MOFs. These results provide a radical departure from typical MOF characterization, enabling insights into physical properties otherwise impossible with bulk analogues while offering a roadmap for the future of MOF nanoparticle synthesis and device fabrication.

Assessment of catalytic and antibacterial activity of biocompatible agar supported ZnS/CuFe2O4 magnetic nanotubes

The tubular magnetic agar supported ZnS/CuFe₂O₄ nanocomposite was fabricated via a simple procedure. Next, various properties of this nanocomposite were studied by employing multiple characterization techniques including FT-IR, EDX, SEM, TEM,VSM, XRD, and TGA. Then, the catalytic and antibacterial applications were evaluated for the fabricated nanocomposite. Based on the experimental result, the nanocomposite showed excellent catalytic activity to promote the multicomponent reaction between ethyl acetoacetate, hydrazine hydrate, aromatic aldehydes, and malononitrile to synthesize a variety of dihydropyrano[2,3-c]pyrazole derivatives with high yields (89–95%) in acceptable reaction times (20–40 min) under mild reaction conditions. It can be efficiently recycled and re-work in six consequent runs without notable reduction in catalytic productiveness. Furthermore, its antibacterial activity was assessed against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacteria by the agar diffusion and plate-count methods. These results indicate that the width of the inhibition zone around the S. aureus (G⁺ bacterium) is more than that of E. coli (G⁻ bacterium). Moreover, the agar supported ZnS/CuFe₂O₄ nanocomposite exhibited strong prevention of the bacterial colonies’ growth.

Surface- and Structural-Dependent Reactivity of Titanium Oxide Nanostructures with 2-Chloroethyl Ethyl Sulfide under Ambient Conditions

Robust materials capable of heterogeneous reactivity are valuable for addressing toxic chemical clean up. Synthetic manipulations for generating titanium oxide nanomaterials have been utilized to alter both photochemical (1000 nm > λ > 400 nm) and chemical heterogeneous reactivity with 2-chloroethyl ethyl sulfide (2-CEES). Synthesizing TiO₂ nanomaterials in the presence of long-chain alkylphosphonic acids enhanced the visible light-driven oxidation of the thioether sulfur of 2-CEES. Photooxidation reaction rates of 99 and 168 μmol/g/h (quantum yields of 5.07 × 10^-4 and 8.58 × 10^-4 molecules/photon, respectively) were observed for samples made with two different alkylphosphonic acids (C₁₄H₂₉PO₃H₂ and C₉H₁₉PO₃H₂, respectively). These observations are correlated with (i) generation of new surface defects/states (i.e., oxygen vacancies) as a result of TiO₂ grafting by alkylphosphonic acid that may serve as reaction active sites, (ii) better light absorption by assemblies of nanorods and nanowires in comparison to individual nanorods, (iii) surface area differences, and (iv) the exclusion of OH groups due to the surface functionalization with alkylphosphonic acids via Ti-O-P bonds on the TiO₂. Alternatively, nanowire-form H₂Ti₂O₅·H₂O was produced and found to be capable of highly efficient hydrolysis of the carbon-chlorine (C-Cl) bond of 2-CEES in the dark with a reaction rate of 279.2 μmol/g/h due to the high surface area and chemical nature of the titanate structure.

Interfacial Charge Transfer Complexes in TiO2-Enediol Hybrids Synthesized by Sol-Gel

Metal oxide-organic hybrid semiconductors exhibit specific properties depending not only on their composition but also on the synthesis procedure, and particularly on the functionalization method, determining the interaction between the two components. Surface adsorption is the most common way to prepare organic-modified metal oxides. Here a simple sol-gel route is described as an alternative, finely controlled strategy to synthesize titanium oxide-based materials containing organic molecules coordinated to the metal. The effect of the molecular structure of the ligands on the surface properties of the hybrids is studied using three enediols able to form charge transfer complexes: catechol, dopamine, and ascorbic acid. For each system, the process conditions driving the transition from the sol to chemical, physical, or particulate gels are explored. The structural, optical, and photoelectrochemical characterization of the amorphous hybrid materials shows analogies and differences related to the organic component. In particular, electron paramagnetic resonance (EPR) spectroscopy at room temperature reveals the presence of organic radical species with different evolution and stability, and photocurrent measurements prove the effective photosensitization of TiO₂ in the visible range induced by interfacial ligand-to-metal charge transfer.

Submicron 3,4-dihydroxybenzoic acid–TiO2 composite particles for enhanced MALDI MS imaging of secondary metabolites in the root of differently aged baical skullcap

This work provides a high-efficient organic-inorganic hybrid matrix for MALDI MSI of secondary metabolites in plant tissues.

Photoelectrochemical IL-6 Immunoassay Manufactured on Multifunctional Catecholate-Modified TiO2 Scaffolds

There is an increasing interest in using photoelectrochemistry for enhancing the signal-to-noise ratio and sensitivity of electrochemical biosensors. Nevertheless, it remains challenging to create photoelectrochemical biosensors founded on stable material systems that are also easily biofunctionalized for sensing applications. Herein, a photoelectrochemical immunosensor is reported, in which the concentration of the target protein directly correlates to a change in the measured photocurrent. The material system for the photoelectrode signal transducer involves using catecholate ligands to modify the properties of TiO₂ nanostructures in a three-pronged approach of morphology tuning, photoabsorption enhancement, and facilitating bioconjugation. The catecholate-modified TiO₂ photoelectrode is combined with a signal-off direct immunoassay to detect interleukin-6 (IL-6), a key biomarker for diagnosing and monitoring various diseases. Catecholate ligands are added during hydrothermal synthesis of TiO₂ to enable the growth of three-dimensional nanostructures to form highly porous photoelectrodes that provide a three-dimensional scaffold for immobilizing capture antibodies. Surface modification by catecholate ligands greatly enhances photocurrent generation of the TiO₂ photoelectrodes by improving photoabsorption in the visible range. Additionally, catecholate molecules facilitate bioconjugation and probe immobilization by forming a Schiff-base between their -COH group and the -NH₂ group of the capture antibodies. The highest photocurrent achieved herein is 8.89 μA cm^-2, which represents an enhancement by a factor of 87 from unmodified TiO₂. The fabricated immunosensor shows a limit-of-detection of 3.6 pg mL^-1 and a log-linear dynamic range of 2-2000 pg mL^-1 for IL-6 in human blood plasma.

Controlling morphology evolution of titanium oxide-gold nanourchin for photocatalytic degradation of dyes and photoinactivation of bacteria in the infected wound

We report a one-pot, room-temperature, morphology-controlled synthesis of titanium oxide (TiO_x)-gold nanocomposites (TiO_x-Au NCs) using HAuCl₄ and TiCl₃ as precursors, and catechin as reducing agent. TiO_x-Au NCs have a range of morphologies from star-like to urchin-like shape depending on the concentration of TiCl₃ in the reaction mixture. The urchin-shaped TiO_x-Au NCs exhibited excellent photocatalytic activity toward dye degradation due to strong light absorption, plasmon-induced excitation, high conductivity of the gold, and reduced hole-electron pair recombination. TiO_x-Au NCs have the advantage of a wide range of light absorption and surface plasmon absorption-mediated excitation due to their abundant gold spikes, which enabled the degradation of dyes over 97% in 60 min, using a xenon lamp as a light source. In addition, TiO_x-Au NCs are highly efficient for the photoinactivation of Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA), and Candida albicans through the photodynamic generation of reactive oxygen species (ROS) and damage to the bacterial membrane. The catechin derivatives on the NCs effectively promoted curing MRSA infected wounds in rats through inducing collagen synthesis, migration of keratinocytes, and neovascularization.

Development of Multi-Scale X-ray Fluorescence Tomography for Examination of Nanocomposite-Treated Biological Samples

Simple Summary

Metal-oxide nanomaterials enter cancer and normal cells even when not specifically targeted, and often interact with specific cellular structures and biological molecules solely due to their innate physical-chemical properties. This raises concerns for the use of nanoparticles, which can be alleviated only with rigorous studies of nanoparticle–cell interactions, studies independent of post-interaction labeling of nanomaterials. X-ray fluorescence microscopy is an imaging technique that quantifies and maps all chemical elements from the periodic table solely based on their native fluorescence excited by the incoming X-ray. We used two different instruments to interrogate the same sample in 3D at two different resolutions and determine heterogeneity of cell-to-cell interactions with nanomaterials, as well as subcellular nanoparticle distribution. This is the first example of multi-scale 3D X-ray fluorescence imaging. This work begins a new era of study on how nanoparticle-based therapies can be developed to be more predictable and safer for use.

Abstract

Research in cancer nanotechnology is entering its third decade, and the need to study interactions between nanomaterials and cells remains urgent. Heterogeneity of nanoparticle uptake by different cells and subcellular compartments represent the greatest obstacles to a full understanding of the entire spectrum of nanomaterials’ effects. In this work, we used flow cytometry to evaluate changes in cell cycle associated with non-targeted nanocomposite uptake by individual cells and cell populations. Analogous single cell and cell population changes in nanocomposite uptake were explored by X-ray fluorescence microscopy (XFM). Very few nanoparticles are visible by optical imaging without labeling, but labeling increases nanoparticle complexity and the risk of modified cellular uptake. XFM can be used to evaluate heterogeneity of nanocomposite uptake by directly imaging the metal atoms present in the metal-oxide nanocomposites under investigation. While XFM mapping has been performed iteratively in 2D with the same sample at different resolutions, this study is the first example of serial tomographic imaging at two different resolutions. A cluster of cells exposed to non-targeted nanocomposites was imaged with a micron-sized beam in 3D. Next, the sample was sectioned for immunohistochemistry as well as a high resolution “zoomed in” X-ray fluorescence (XRF) tomography with 80 nm beam spot size. Multiscale XRF tomography will revolutionize our ability to explore cell-to-cell differences in nanomaterial uptake.

Impact of Polyphenol Interactions with Titanium Dioxide Nanoparticles on Their Bioavailability and Antioxidant Activity

Titanium dioxide is widely utilized as a pigment in the food industry to enhance the whiteness or brightness of foods and beverages. The powdered forms of titanium dioxide used as food ingredients contain a substantial fraction of nanoparticles (d < 100 nm), which may have adverse effects on human health. This is a model study that investigated the molecular interactions between TiO₂ nanoparticles and selected polyphenols, as well as their influence on the in vitro bioavailability and antioxidant activity of the polyphenols. Our results showed that the chemical structure of polyphenols significantly influenced their binding affinity to TiO₂ nanoparticle surfaces, with those possessing vicinal trihydroxy groups having the highest binding affinities. The presence of TiO₂ nanoparticles was shown to reduce the bioavailability of polyphenols using an in vitro digestion model. This effect was mainly ascribed to the formation of large TiO₂ nanoparticle-polyphenol complex agglomerates that could not pass through the pores in the dialysis tube used to simulate the epithelium layer. Additionally, the binding of polyphenols to the surfaces of TiO₂ nanoparticles reduced their antioxidant activity. This study provides valuable insights into the impact of inorganic nanoparticles on the bioavailability and bioactivity of polyphenols.

An Iron Shield to Protect Epigallocatehin-3-Gallate from Degradation: Multifunctional Self-Assembled Iron Oxide Nanocarrier Enhances Protein Kinase CK2 Intracellular Targeting and Inhibition

Protein kinase CK2 is largely involved in cell proliferation and apoptosis and is generally recognized as an Achilles’ heel of cancer, being overexpressed in several malignancies. The beneficial effects of (−)-epigallocatechin-3-gallate (EGCG) in the prevention and treatment of several diseases, including cancer, have been widely reported. However, poor stability and limited bioavailability hinder the development of EGCG as an effective therapeutic agent. The combination of innovative nanomaterials and bioactive compounds into nanoparticle-based systems demonstrates the synergistic advantages of nanocomplexes as compared to the individual components. In the present study, we developed a self-assembled core-shell nanohybrid (SAMN@EGCG) combining EGCG and intrinsic dual-signal iron oxide nanoparticles (Surface Active Maghemite Nanoparticles). Interestingly, nano-immobilization on SAMNs protects EGCG from degradation, preventing its auto-oxidation. Most importantly, the nanohybrid was able to successfully deliver EGCG into cancer cells, displaying impressive protein kinase CK2 inhibition comparable to that obtained with the most specific CK2 inhibitor, CX-4945 (5.5 vs. 3 µM), thus promoting the phytochemical exploitation as a valuable alternative for cancer therapy. Finally, to assess the advantages offered by nano-immobilization, we tested SAMN@EGCG against Pseudomonas aeruginosa, a Gram-negative bacterium involved in severe lung infections. An improved antimicrobial effect with a drastic drop of MIC from 500 to 32.7 μM was shown.

Linkage Dependence of Interfacial Charge-Transfer Transitions in ZnO: Carboxylate versus Sulfur Linker

Interfacial charge-transfer transitions (ICTTs) between organic compounds and inorganic semiconductors have recently attracted much attention due to the unique features of a wide range of visible light absorption with colorless organic molecules and direct interfacial charge separation for their potential applications in photoenergy conversions and chemical sensing. As the research on ICTT has almost been limited to titanium oxide semiconductors such as TiO₂, the exploration of ICTT in other inorganic semiconductors is a high-priority issue. Recently, we demonstrated that ICTT is strongly induced by chemisorption of aromatic thiols on ZnO nanoparticles via the sulfur atom. Here, we report on ICTT in ZnO nanoparticles adsorbed with benzoic acid derivatives and the linkage dependence of ICTT in ZnO. We observed ICTT bands in the visible region upon adsorption of 4-(dimethylamino)benzoic acid (4-DMABA) and 3,4-dimethoxybenzoic acid (3,4-DMOBA) on ZnO nanoparticles via the carboxylate group. Notably, the ICTT absorption intensities are about 1 order of magnitude lower than those in the ZnO surface complexes with aromatic thiol compounds. Time-dependence density functional theory (TD-DFT) calculations well reproduce the linkage dependence of ICTT. This characteristic linkage dependence of ICTT in ZnO is attributed to the difference in the valence orbital of bridging atoms. The sulfur bridging atom with the larger 3p valence orbitals gives rise to strong electronic couplings between ZnO and adsorbates for ICTT, in contrast to very weak electronic couplings via the smaller 2p valence orbitals of the oxygen bridging atoms in the carboxylate linkage. Our research reveals the important linkage dependence of ICTT in ZnO and elucidates the mechanism.

Interfacial charge-transfer transitions in SnO2 functionalized with benzoic acid derivatives

Interfacial charge-transfer transitions (ICTTs) between organic compounds and inorganic semiconductors have recently attracted increasing attention for their potential applications in solar energy conversions and chemical sensing due to the unique functions of visible-light absorption with colourless organic molecules and direct charge separation. However, inorganic semiconductors available for ICTT are quite limited to a few kinds of metal-oxide semiconductors (TiO2, ZnO, etc.). Particularly, the exploration of ICTT in inorganic semiconductors with a lower-energy conduction band such as SnO2 is an important issue for realizing a wide range of visible-light absorption for organic adsorbates with the deep highest occupied molecular orbital (HOMO) such as benzoic acid derivatives. Here, we report the first observation of ICTT in SnO2. SnO2 nanoparticles show a broad absorption band in the visible region by chemisorption of 4-dimethylaminobenzoic acid (4-DMABA) and 4-aminobenzoic acid (4-ABA)) via the carboxylate group. The wavelength range of the ICTT band significantly changes depending on the kind of substituent group. The ionization potential measurement and density functional theory (DFT) analysis reveal that the absorption band is attributed to ICTT from the HOMO of the adsorbed benzoic acid derivatives to the conduction band of SnO2. In addition, we clarify the mechanism of ICTT in SnO2 computationally. Our research opens up a way to the fundamental research on ICTT in SnO2 and applications in solar energy conversions and chemical sensing.

The Influence of Small Organic Molecules on Coagulation from the Perspective of Hydrolysis Competition and Crystallization

Most coagulation studies focus on pollutant removal or floc separation efficiency. However, to understand the mechanism of coagulation, it is necessary to explore the behavior of coagulation in terms of the interactions among the functional groups on the surface of the metal hydrolysis precipitates during the hydrolysis process. In this study, for the first time, aluminum sulfate (alum) was used to investigate such interactions over the whole process sequence of hydrolysis, coagulation, and crystallization with, and without (as a control), the presence of specific low molecular weight (LMW) (molecular weight < 1000 Da) organic compounds with different chemical bonds. It was observed that primary nanoparticles (NPs) of around 10 nm size were produced during the hydrolysis of alum. The presence of organic compounds was found to influence the coagulation performance by affecting the metal hydrolysis and the properties of the nanoparticles. At pH 7, ethylenediaminetetraacetic acid disodium salt (EDTA) delayed the time when the particles start to aggregate but increased the maximum size of the flocs, while citric acid caused the crystallization of amorphous hydrates and inhibited the coagulation performance. In contrast, glucose, benzoic acid (BEN), and tris(hydroxymethyl)aminomethane (THMAM) had no significant effect on the coagulation performance. Therefore, LMW organics can bond to the hydrolysis products of metal ions through key functional groups, such as carboxyl groups, and then affect the coagulation process. The experimental results show that the presence of LMW organics can change the surface properties and degree of crystallization of the primary NPs, thereby affecting the performance of coagulation.

Development of Fe3O4 core–TiO2 shell nanocomposites and nanoconjugates as a foundation for neuroblastoma radiosensitization

Background

Neuroblastoma is the most common extracranial solid malignancy in childhood which, despite the current progress in radiotherapy and chemotherapy protocols, still has a high mortality rate in high risk tumors. Nanomedicine offers exciting and unexploited opportunities to overcome the shortcomings of conventional medicine. The photocatalytic properties of Fe3O4 core-TiO2 shell nanocomposites and their potential for cell specific targeting suggest that nanoconstructs produced using Fe3O4 core-TiO2 shell nanocomposites could be used to enhance radiation effects in neuroblastoma. In this study, we evaluated bare, metaiodobenzylguanidine (MIBG) and 3,4-Dihydroxyphenylacetic acid (DOPAC) coated Fe3O4@TiO2 as potential radiosensitizers for neuroblastoma in vitro.

Results

The uptake of bare and MIBG coated nanocomposites modestly sensitized neuroblastoma cells to ionizing radiation. Conversely, cells exposed to DOPAC coated nanocomposites exhibited a five-fold enhanced sensitivity to radiation, increased numbers of radiation induced DNA double-strand breaks, and apoptotic cell death. The addition of a peptide mimic of the epidermal growth factor (EGF) to nanoconjugates coated with MIBG altered their intracellular distribution. Cryo X-ray fluorescence microscopy tomography of frozen hydrated cells treated with these nanoconjugates revealed cytoplasmic as well as nuclear distribution of the nanoconstructs.

Conclusions

The intracellular distribution pattern of different nanoconjugates used in this study was different for different nanoconjugate surface molecules. Cells exposed to DOPAC covered nanoconjugates showed the smallest nanoconjugate uptake, with the most prominent pattern of large intracellular aggregates. Interestingly, cells treated with this nanoconjugate also showed the most pronounced radiosensitization effect in combination with the external beam x-ray irradiation. Further studies are necessary to evaluate mechanistic basis for this increased radiosensitization effect. Preliminary studies with the nanoparticles carrying an EGF mimicking peptide showed that this approach to targeting could perhaps be combined with a different approach to radiosensitization – use of nanoconjugates in combination with the radioactive iodine. Much additional work will be necessary in order to evaluate possible benefits of targeted nanoconjugates carrying radionuclides.

Graphic abstract

Physicochemical implications of surface alkylation of high-valent, Lindqvist-type polyoxovanadate-alkoxide clusters

We report a rare example of the direct alkylation of the surface of a plenary polyoxometalate cluster by leveraging the increased nucleophilicity of vanadium oxide assemblies. Addition of methyl trifluoromethylsulfonate (MeOTf) to the parent polyoxovanadate cluster, [V₆O₁₃(TRIOL^R)₂]^2- (TRIOL = tris(hydroxymethyl)methane; R = Me, NO₂) results in functionalisation of one or two bridging oxide ligands of the cluster core to generate [V₆O₁₂(OMe)(TRIOL^R)₂]^1- and [V₆O₁₁(OMe)₂(TRIOL^R)₂]^2-, respectively. Comparison of the electronic absorption spectra of the functionalised and unfunctionalised derivatives indicates the decreased overall charge of the complex results in a decrease in the energy required for ligand to metal charge transfer events to occur, while simultaneously mitigating the inductive effects imposed by the capping TRIOL ligand. Electrochemical analysis of the family of organofunctionalised polyoxovanadate clusters reveals the relationship of ligand environment and the redox properties of the cluster core: increased organofunctionalisation of the surface of the vanadium oxide assembly translates to anodic shifts in the reduction events of the Lindqvist ion. Overall, this work provides insight into the electronic effects induced upon atomically precise modifications to the surface structure of nanoscopic, redox-active metal oxide assemblies.

Dispersant Molecules with Functional Catechol Groups for Supercapacitor Fabrication

Cathodes for supercapacitors with enhanced capacitive performance are prepared using MnO₂ as a charge storage material and carbon nanotubes (CNT) as conductive additives. The enhanced capacitive properties are linked to the beneficial effects of catecholate molecules, such as chlorogenic acid and 3,4,5-trihydroxybenzamide, which are used as co-dispersants for MnO₂ and CNT. The dispersant interactions with MnO₂ and CNT are discussed in relation to the chemical structures of the dispersant molecules and their biomimetic adsorption mechanisms. The dispersant adsorption is a key factor for efficient co-dispersion in ethanol, which facilitated enhanced mixing of the nanostructured components and allowed for improved utilization of charge storage properties of the electrode materials with high active mass of 40 mg cm⁻². Structural peculiarities of the dispersant molecules are discussed, which facilitate dispersion and charging. Capacitive properties are analyzed using cyclic voltammetry, chronopotentiometry and impedance spectroscopy. A capacitance of 6.5 F cm⁻² is achieved at a low electrical resistance. The advanced capacitive properties of the electrodes are linked to the microstructures of the electrodes prepared in the presence of the dispersants.

Atomically precise vanadium-oxide clusters

Polyoxovanadate (POV) clusters are an important subclass of polyoxometalates with a broad range of molecular compositions and physicochemical properties. One relatively underdeveloped application of these polynuclear assemblies involves their use as atomically precise, homogenous molecular models for bulk metal oxides. Given the structural and electronic similarities of POVs and extended vanadium oxide materials, as well as the relative ease of modifying the homogenous congeners, investigation of the chemical and physical properties of pristine and modified cluster complexes presents a method toward understanding the influence of structural modifications (e.g. crystal structure/phase, chemical makeup of surface ligands, elemental dopants) on the properties of extended solids. This review summarises recent advances in the use of POV clusters as atomically precise models for bulk metal oxides, with particular focus on the assembly of vanadium oxide clusters and the consequences of altering the molecular composition of the assembly via organofunctionalization and the incorporation of elemental "dopants".

Magnetic Polymer Composite Particles: Design and Magnetorheology

As a family of smart functional hybrid materials, magnetic polymer composite particles have attracted considerable attention owing to their outstanding magnetism, dispersion stability, and fine biocompatibility. This review covers their magnetorheological properties, namely, flow curve, yield stress, and viscoelastic behavior, along with their synthesis. Preparation methods and characteristics of different types of magnetic composite particles are presented. Apart from the research progress in magnetic polymer composite synthesis, we also discuss prospects of this promising research field.

Bio-inspired surface modification of iron oxide nanoparticles for active stabilization in hydrogels

Biological materials employ a variety of dynamic interactions in sophisticated composite structures to function adaptively on different time and length scales. Inspired by such designs we develop a novel surface modification approach to promote dynamic interactions between nanoparticles and polymer chains in physical and double network hydrogels. Physical hydrogels are formed via reversible complexation of borate ions with poly(vinyl alcohol) (PVA) and chemical crosslinks are introduced by electron beam irradiation. Dopamine is used for surface modification of magnetic iron oxide nanoparticles (MNPs) in two different ways: the direct treatment results in anchoring via catechol groups, whereas the indirect method leaves the catechol group on the free surface of MNPs. Although the former particles show very good colloidal stability, they lower the network connectivity, which results in lower plateau modulus, faster terminal relaxation, and lower yield stress, presumably due to imposing an extra distance between PVA chains. In contrast to this passive design, the latter particles actively reinforce the network by forming clusters of physical bonds between catechol groups of the individual particles and the monodiol complexes of the borate ions and PVA chains. Moreover, the additional complexes formed upon the introduction of nanoparticles with active surfaces provide further energy dissipation potential and therefore enhance the toughness. This approach can help develop novel hydrogels with superior toughness and multiple stimuli-responsiveness.