Low-Molecular-Weight and Oligomeric Components in Secondary Organic Aerosol from the Ozonolysis of Cycloalkenes and α-Pinene

Analytical methodologies for oxidized organic compounds in the atmosphere

Oxidized compounds in the atmosphere can occur as emitted primary compounds or as secondary products when volatile emitted precursors react with various oxidants. Due to the presence of polar functional groups, their vapor pressures decrease, and they condense onto small particles. Thereby, they have an effect on climate change by the formation of clouds and scattering solar radiation. The particles and oxidized compounds themselves can cause serious health problems when inhaled. Therefore, it is of utmost importance to study oxidized compounds in the atmosphere. Much ongoing research is focused on the discovery of new oxidized substances and on the evaluation of their sources and factors influencing their formation. Monitoring biogenic and anthropogenic primary oxidized compounds or secondary oxidized products in chamber experiments or field campaigns is common. New discoveries have been reported, including various oxidized compounds and a new group of compounds called highly oxidized organic molecules (HOMs). Analytics of HOMs are mainly focused on chromatography and high-resolution mass spectrometry employing chemical ionization for identifying and quantifying compounds at low concentrations. Oxidized compounds can also be monitored by spectrophotometric methods in which the determinations of total amounts are based on functional groups. This review highlights recent findings on oxidized organic compounds in the atmosphere and analytical methodologies used for their detection and quantification. The discussion includes gas and liquid chromatographic methods, sampling, extraction, concentration, and derivatization procedures involved, as well as mass spectrometric and spectrophotometric methods.

Hydrogen-Bonding Interactions of Malic Acid with Common Atmospheric Bases

Malic acid (MA) (C₄H₆O₅) is one of the most important organic constituents of fruits that is widely used in food and beverage industries. It is also detected in the atmospheric aerosol samples collected in different parts of the world. Considering the fact that secondary organic aerosols have adverse impacts on the global atmosphere and climate and a molecular-level understanding of the compositions and formation mechanism of secondary organic aerosols is necessary, we have performed systematic density functional electronic structure calculations to investigate the hydrogen-bonding interactions between MA and several naturally occurring nitrogen-containing atmospheric bases such as ammonia and amines that are derived from ammonia by the substitution of hydrogens by a methyl group. The base molecules were allowed to interact with the carboxylic COOH and the hydroxyl-OH group of the MA separately. While at both sites, MA produces energetically stable binary complexes with bases with large negative values of binding energy, the thermodynamical stability, at an ambient temperature and pressure of 298.15 K and 1 atm, respectively, is favored only for the clusters formed at the COOH site. A much larger red shift of the carboxylic-OH stretch than that of the hydroxyl-OH reinforces the preference of this site for cluster formation. Both the binding electronic energy and binding free energy of MA-ammonia complexes are lower than those of MA-amine complexes, although the amines are derivatives of NH₃. The large increase in the Rayleigh activities upon cluster formation indicates that the MA-atmospheric base cluster may interact strongly with solar radiation. The detailed analysis of the structural, energetic, electrical, and spectroscopic properties of the binary complexes formed by MA with atmospheric bases shows that MA could participate in the atmospheric nucleation processes and subsequently contribute effectively to new particle formation in the atmosphere.

Molecular and Structural Characterization of Isomeric Compounds in Atmospheric Organic Aerosol Using Ion Mobility-Mass Spectrometry

Secondary organic aerosol (SOA) formed through multiphase atmospheric chemistry makes up a large fraction of airborne particles. The chemical composition and molecular structures of SOA constituents vary between different emission sources and aging processes in the atmosphere, which complicates their identification. In this work, we employ drift tube ion mobility spectrometry with quadrupole time-of-flight mass spectrometry (IM-MS) detection for rapid gas-phase separation and multidimensional characterization of isomers in two biogenic SOAs produced from ozonolysis of isomeric monoterpenes, d-limonene (LSOA) and α-pinene (PSOA). SOA samples were ionized using electrospray ionization (ESI) and characterized using IM-MS in both positive and negative ionization modes. The IM-derived collision cross sections in nitrogen gas (^DTCCS_N2 ) for individual SOA components were obtained using multifield and single-field measurements. A novel application of IM multiplexing/high-resolution demultiplexing methodology was employed to increase sensitivity, improve peak shapes, and augment mobility baseline resolution, which revealed several isomeric structures for the measured ions. For LSOA and PSOA samples, we report significant structural differences of the isomer structures. Molecular structural calculations using density functional theory combined with the theoretical modeling of CCS values provide insights into the structural differences between LSOA and PSOA constituents. The average ^DTCCS_N2 values for monomeric SOA components observed as [M + Na]⁺ ions are 3-6% higher than those of their [M - H]^- counterparts. Meanwhile, dimeric and trimeric isomer components in both samples showed an inverse trend with the relevant values of [M - H]^- ions being 3-7% higher than their [M + Na]⁺ counterparts, respectively. The results indicate that the structures of Na⁺-coordinated oligomeric ions are more compact than those of the corresponding deprotonated species. The coordination with Na⁺ occurs on the oxygen atoms of the carbonyl groups leading to a compact configuration. Meanwhile, deprotonated molecules have higher ^DTCCS_N2 values due to their elongated structures in the gas phase. Therefore, ^DTCCS_N2 values of isomers in SOA mixtures depend strongly on the mode of ionization in ESI. Additionally, PSOA monomers and dimers exhibit larger ^DTCCS_N2 values (1-4%) than their LSOA counterparts owing to more rigid structures. A cyclobutane ring is present with functional groups pointing in opposite directions in PSOA compounds, as compared to noncyclic flexible LSOA structures, forming more compact ions in the gas phase. Lastly, we investigated the effects of direct photolysis on the chemical transformations of selected individual PSOA components. We use IM-MS to reveal structural changes associated with aerosol aging by photolysis. This study illustrates the detailed molecular and structural descriptors for the detection and annotation of structural isomers in complex SOA mixtures.

Phase Behavior of Hydrocarbon-like Primary Organic Aerosol and Secondary Organic Aerosol Proxies Based on Their Elemental Oxygen-to-Carbon Ratio

A large fraction of atmospheric aerosols can be characterized as primary organic aerosol (POA) and secondary organic aerosol (SOA). Knowledge of the phase behavior, that is, the number and type of phases within internal POA + SOA mixtures, is crucial to predict their effect on climate and air quality. For example, if POA and SOA form a single phase, POA will enhance the formation of SOA by providing organic mass to absorb SOA precursors. Using microscopy, we studied the phase behavior of mixtures of SOA proxies and hydrocarbon-like POA proxies at relative humidity (RH) values of 90%, 45%, and below 5%. Internal mixtures of POA and SOA almost always formed two phases if the elemental oxygen-to-carbon ratio (O/C) of the POA was less than 0.11, which encompasses a large fraction of atmospheric hydrocarbon-like POA from fossil fuel combustion. SOA proxies mixed with POA proxies having 0.11 ≤ O/C ≤ 0.29 mostly resulted in particles with one liquid phase. However, two liquid phases were also observed, depending on the type of SOA and POA surrogates, and an increase in phase-separated particles was observed when increasing the RH in this O/C range. The results have implications for predicting atmospheric SOA formation and policy strategies to reduce SOA in urban environments.

Evaluating Indoor Air Chemical Diversity, Indoor-to-Outdoor Emissions, and Surface Reservoirs Using High-Resolution Mass Spectrometry

Detailed offline speciation of gas- and particle-phase organic compounds was conducted using gas/liquid chromatography with traditional and high-resolution mass spectrometers in a hybrid targeted/nontargeted analysis. Observations were focused on an unoccupied home and were compared to two other indoor sites. Observed gas-phase organic compounds span the volatile to semivolatile range, while functionalized organic aerosols extend from intermediate volatility to ultra-low volatility, including a mix of oxygen, nitrogen, and sulfur-containing species. Total gas-phase abundances of hydrocarbon and oxygenated gas-phase complex mixtures were elevated indoors and strongly correlated in the unoccupied home. While gas-phase concentrations of individual compounds generally decreased slightly with greater ventilation, their elevated ratios relative to controlled emissions of tracer species suggest that the dilution of gas-phase concentrations increases off-gassing from surfaces and other indoor reservoirs, with volatility-dependent responses to dynamically changing environmental factors. Indoor-outdoor emissions of gas-phase intermediate-volatility/semivolatile organic hydrocarbons from the unoccupied home averaged 6-11 mg h^-1, doubling with ventilation. While the largest single-compound emissions observed were furfural (61-275 mg h^-1) and acetic acid, observations spanned a wide range of individual volatile chemical products (e.g., terpenoids, glycol ethers, phthalates, other oxygenates), highlighting the abundance of long-lived reservoirs resulting from prior indoor use or materials, and their gradual transport outdoors.

Seasonal variation of dicarboxylic acids in PM2.5 in Beijing: Implications for the formation and aging processes of secondary organic aerosols

Dicarboxylic acids are a group of highly oxidized components, which can provide insights into the formation mechanism and aging process of secondary organic aerosols (SOA). Based on the 12-h day and night PM_2.5 samples collected in downtown Beijing in January, April, July and October of 2017, dicarboxylic acids and relevant components were measured to investigate their seasonal variation pattern and sources. High concentrations of the identified organic acids were observed, following the decreasing order of July > January > October > April. The high fractions of phthalic acid and maleic acid in January indicated severe aromatic SOA pollution during the sampling period in winter, and the high malonic acid to succinic acid and malic acid to succinic acid ratios in July suggested strong photochemical formation over the sampling period in summer. Based on the calculation of principle component analysis and multiple linear regression, water-soluble organic acids were mainly formed from the aerosol aging process during the sampling periods except for January, while water-soluble organic carbon (WSOC) mostly originated from combustion sources. Correlation analysis was conducted between the CO-normalized concentrations of organic acids and PM_2.5, O₃, as well as the meteorological parameters. The results suggested that gas-phase photooxidation contributed significantly to the formation of these organic acids during the entire sampling period, and the aqueous-phase process played an important role over the severe haze event in January. Our results also suggested that the intensity of photooxidation and the aging degree of SOA were enhanced along with the reduction of PM_2.5 in Beijing in recent years.

Reaction Kinetics of Organic Aerosol Studied by Droplet Assisted Ionization: Enhanced Reactivity in Droplets Relative to Bulk Solution

Droplet Assisted Ionization (DAI) is a relatively new method for online analysis of aerosol droplets that enables measurement of the rate of an aerosol reaction. Here, we used DAI to study the reaction of carbonyl functionalities in secondary organic aerosol (SOA) with Girard's T (GT) reagent, a reaction that can potentially be used to enhance the detection of SOA in online measurements. SOA was produced by α-pinene ozonolysis. Particulate matter was collected on a filter, extracted, and mixed with GT reagent in water. While the reaction hardly proceeded at all in bulk solution, products were readily observed with DAI when the solution was atomized to produce micron-size droplets. Varying the droplet transit time between the atomizer and mass spectrometer allowed the reaction rate constant to be determined, which was found to be 4 orders of magnitude faster than what would be expected from bulk solution kinetics. Decreasing the water content of the droplets, either by heating the capillary inlet to the mass spectrometer or by decreasing the relative humidity of the air surrounding the droplets in the transit line from the atomizer to the mass spectrometer, enhanced product formation. The results suggest that reaction enhancement occurs at the droplet surface, which is consistent with previous reports of reaction acceleration during mass spectrometric analysis, where a bulk solution is analyzed with an ionization method that produces aerosol droplets.

Primary and secondary organic aerosol in an urban/industrial site: Sources, health implications and the role of plastic enriched waste burning

PM10 samples were collected from an urban/industrial site nearby Athens, where uncontrolled burning activities occur. PAHs, monocarboxylic, dicarboxylic, hydroxycarboxylic and aromatic acids, tracers from BVOC oxidation, biomass burning tracers and bisphenol A were determined. PAH, monocarboxylic acids, biomass burning tracers and bisphenol A were increased during autumn/winter, while BSOA tracers, dicarboxylic- and hydroxycarboxylic acids during summer. Regarding aromatic acids, different sources and formation mechanisms were indicated as benzoic, phthalic and trimellitic acids were peaked during summer whereas p-toluic, isophthalic and terephthalic were more abundant during autumn/winter. The Benzo[a]pyrene-equivalent carcinogenic power, carcinogenic and mutagenic activities were calculated showing significant (p < 0.05) increases during the colder months. Palmitic, succinic and malic acids were the most abundant monocarboxylic, dicarboxylic and hydrocarboxylic acids during the entire sampling period. Isoprene oxidation was the most significant contributor to BSOA as the isoprene-SOA compounds were two times more abundant than the pinene-SOA (13.4 ± 12.3 and 6.1 ± 2.9 ng/m³, respectively). Ozone has significant impact on the formation of many studied compounds showing significant correlations with: isoprene-SOA (r = 0.77), hydrocarboxylic acids (r = 0.69), pinene-SOA (r = 0.63),dicarboxylic acids (r = 0.58), and the sum of phthalic, benzoic and trimellitic acids (r = 0.44). PCA demonstrated five factors that could explain sources including plastic enriched waste burning (30.8%), oxidation of unsaturated fatty acids (23.0%), vehicle missions and cooking (9.2%), biomass burning (7.7%) and oxidation of VOCs (5.8%). The results highlight the significant contribution of plastic waste uncontrolled burning to the overall air quality degradation.

Secondary organic aerosol tracers and related polar organic compounds between urban and rural areas in the Eastern Mediterranean region: source apportionment and the influence of atmospheric oxidants

Fine particle samples were collected during summer at an urban (LIM) and a rural/background (AGM) site of Cyprus. They were analyzed for pinene and isoprene secondary organic aerosol (PSOA-ISOA) tracers, linear dicarboxylic acids (DCAs), hydroxyacids (HAs), aromatic acids (AAs), monocarboxylic acids (MCAs) and levoglucosan by GC/MS with prior 3-step derivatization. DCAs, AAs, MCAs and levoglucosan exhibited significantly higher concentrations (p < 0.05) in LIM, PSOAs and ISOAs in AGM (p < 0.05), whereas mixed trends were found for HAs. Among DCAs, succinic was the most abundant in both sites, accounting for 42.5% and 36.5% of the total DCAs in LIM and AGM respectively, followed by adipic in LIM (20.1%) and azelaic in AGM (22.4%). Malic, phthalic and palmitic acids were the dominant HA, AA and MCA, respectively. Regarding PSOAs, significant differences were observed between the two sites, with the first-generation products accounting for 59.8% of the total measured PSOAs in AGM, but were remarkably lowered (10.3%) in LIM indicating that they were highly oxidized. 2-Methylerythritol was the dominant ISOA tracer in both sites; nevertheless the elevated relative abundance of 2-methylglyceric acid in LIM implies the influences of higher NO_x levels. The increased O₃ levels observed in AGM appear to have a significant impact on SOA formation. Source apportionment tools employed revealed factors related to secondary formation processes including oxidation of unsaturated fatty acids, pinene, isoprene and anthropogenic VOCs and factors associated with primary sources such as biomass burning, plant emissions and/or cooking and motor exhaust, with noteworthy differences observed between the two areas.

Monoterpene and Sesquiterpene α-Hydroxy Organosulfates: Synthesis, MS/MS Characteristics, and Ambient Presence

Organosulfates (OSs) derived from biogenic volatile organic compounds are important compounds signifying interactions between anthropogenic sulfur pollution and natural emission. In this work, we substantially expand the OS standard library through the chemical synthesis of 26 α-hydroxy OS standards from eight monoterpenes (i.e., α- and β-pinene, limonene, sabinene, Δ³-carene, terpinolene, and α- and γ-terpinene) and two sesquiterpenes (i.e., α-humulene and β-caryophyllene). The sulfation of unsymmetrically substituted 1,2-diol intermediates produced a regioisomeric mixture of two OSs. The major regioisomeric OSs were isolated and purified for full NMR characterization, while the minor regioisomers could only be determined by liquid chromatograph-mass spectrometer (MS). The tandem mass spectra of the molecular ion formed through electrospray ionization confirmed the formation of abundant bisulfate ion fragments (m/z 97) and certain minor ion fragments characteristic of the carbon backbone. A knowledge of the MS/MS spectra and chromatographic retention times for authentic standards allows us to identify α-hydroxy OSs derived from six monoterpenes and β-caryophyllene in ambient samples. Notably, among two possible regioisomers of α-hydroxy OSs, we only detected the isomers with the sulfate group at the less substituted carbon position derived from α-pinene, limonene, sabinene, Δ³-carene, and terpinolene in the ambient samples. This observation sheds light on the atmospheric OS formation mechanisms.

Identification of the Criegee intermediate reaction network in ethylene ozonolysis: impact on energy conversion strategies and atmospheric chemistry

The reaction network of the simplest Criegee intermediate (CI) CH₂OO has been studied experimentally during the ozonolysis of ethylene.

Iodometry-Assisted Liquid Chromatography Electrospray Ionization Mass Spectrometry for Analysis of Organic Peroxides: An Application to Atmospheric Secondary Organic Aerosol

Organic peroxides comprise a significant fraction of atmospheric secondary organic aerosol (SOA). Detection and quantification of particle-phase organic peroxides are highly challenging, and current efforts rely significantly on filter extraction and offline mass spectrometry (MS). Here, a novel technique, iodometry-assisted liquid chromatography electrospray ionization mass spectrometry (iodometry-assisted LC-ESI-MS), is developed and evaluated with a class of atmospherically relevant organic peroxides, α-acyloxyalkyl hydroperoxides, synthesized via liquid ozonolysis. Iodometry-assisted LC-ESI-MS unambiguously distinguishes organic peroxides, compensating for the lack of functional group information that can be obtained with MS. This technique can be versatile for a wide spectrum of environmental analytical applications for which a molecular-level identification of organic peroxide is required. Here, iodometry-assisted LC-ESI-MS is applied to the water-soluble organic carbon (WSOC) of α-pinene SOA. Unexpectedly, a limited number of detectable compounds in WSOC appear to be organic peroxides, despite the fact that spectroscopy-based iodometry indicates 15% of WSOC mass is associated with organic peroxides. This observation would be consistent with decomposition of multifunctional organic peroxides to small peroxides that can be quantified by spectroscopy-based iodometry but not by LC-ESI-MS. Overall, this study raises concerns regarding filter extraction-based studies, showing that assignment of organic peroxides solely on the basis of MS signatures can be misleading.

Exploring the chemical kinetics of partially oxidized intermediates by combining experiments, theory, and kinetic modeling

Partially oxidized intermediates play a central role in combustion and atmospheric chemistry. In this perspective, we focus on the chemical kinetics of alkoxy radicals, peroxy radicals, and Criegee intermediates, which are key species in both combustion and atmospheric environments. These reactive intermediates feature a broad spectrum of chemical diversity. Their reactivity is central to our understanding of how volatile organic compounds are degraded in the atmosphere and converted into secondary organic aerosol. Moreover, they sensitively determine ignition timing in internal combustion engines. The intention of this perspective article is to provide the reader with information about the general mechanisms of reactions initiated by addition of atomic and molecular oxygen to alkyl radicals and ozone to alkenes. We will focus on critical branching points in the subsequent reaction mechanisms and discuss them from a consistent point of view. As a first example of our integrated approach, we will show how experiment, theory, and kinetic modeling have been successfully combined in the first infrared detection of Criegee intermediates during the gas phase ozonolysis. As a second example, we will examine the ignition timing of n-heptane/air mixtures at low and intermediate temperatures. Here, we present a reduced, fuel size independent kinetic model of the complex chemistry initiated by peroxy radicals that has been successfully applied to simulate standard n-heptane combustion experiments.

Controlling factors of oligomerization at the water surface: why is isoprene such a unique VOC?

The interfacial oligomerization of isoprene is facilitated by the resonance stabilization through the formation of a tertiary carbocation with a conjugated CC bond pair, and electron enrichment induced by the neighboring methyl group.

Persistence of urban organic aerosols composition: Decoding their structural complexity and seasonal variability

Organic Aerosols (OAs) are typically defined as highly complex matrices whose composition changes in time and space. Focusing on time vector, this work uses two-dimensional nuclear magnetic resonance (2D NMR) techniques to examine the structural features of water-soluble (WSOM) and alkaline-soluble organic matter (ASOM) sequentially extracted from fine atmospheric aerosols collected in an urban setting during cold and warm seasons. This study reveals molecular signatures not previously decoded in NMR-related studies of OAs as meaningful source markers. Although the ASOM is less hydrophilic and structurally diverse than its WSOM counterpart, both fractions feature a core with heteroatom-rich branched aliphatics from both primary (natural and anthropogenic) and secondary origin, aromatic secondary organics originated from anthropogenic aromatic precursors, as well as primary saccharides and amino sugar derivatives from biogenic emissions. These common structures represent those 2D NMR spectral signatures that are present in both seasons and can thus be seen as an "annual background" profile of the structural composition of OAs at the urban location. Lignin-derived structures, nitroaromatics, disaccharides, and anhydrosaccharides signatures were also identified in the WSOM samples only from periods identified as smoke impacted, which reflects the influence of biomass-burning sources. The NMR dataset on the H-C molecules backbone was also used to propose a semi-quantitative structural model of urban WSOM, which will aid efforts for more realistic studies relating the chemical properties of OAs with their atmospheric behavior.

Synthesis of Four Monoterpene-Derived Organosulfates and Their Quantification in Atmospheric Aerosol Samples

Monoterpenes, a major class of biogenic volatile organic compounds, are known to produce oxidation products that further react with sulfate to form organosulfates. The accurate quantification of monoterpene-derived organosulfates (OSs) is necessary for quantifying this controllable aerosol source; however, it has been hampered by a lack of authentic standards. Here we report a unified synthesis strategy starting from the respective monoterpene through Upjohn dihydroxylation or Sharpless asymmetric dihydroxylation followed by monosulfation with the sulfur trioxide-pyridine complex. We demonstrate the successful synthesis of four monoterpene-derived OS compounds, including α-pinene OS, β-pinene OS, limonene OS, and limonaketone OS. Quantification of OSs is commonly achieved using liquid chromatography-mass spectrometry (LC-MS) by either monitoring the [M-H]^- ion or through multiple reaction monitoring (MRM) of mass transitions between the [M-H]^- and m/z 97 ions. Comparison between the synthesized standards and previously adopted quantification surrogates reveals that camphor-10-sulfonic acid is a better quantification surrogate using [M-H]^- as the quantification ion, while the highly compound-specific nature of MRM quantification makes it difficult to choose a suitable surrogate. Both could be rationalized in accordance to their respective MS quantification mechanisms. The in-house availability of the authentic standards enables us to discover that β-pinene OS, due to the sulfate group at the primary carbon, partially degrades to a dehydrogenated OS compound during LC/MS analysis and a hydroperoxy OS over a prolonged storage period (>5 month) and forms a regioisomer through intermolecular isomerization. Limonene OS was positively identified for the first time in ambient samples and found to be more abundant than α-/β-pinene OS in the Pearl River Delta, China. This work highlights the critical importance of having authentic standards in advancing our understanding of the interactions between biogenic VOC emissions and anthropogenic sulfur pollution.

Influence of metal-mediated aerosol-phase oxidation on secondary organic aerosol formation from the ozonolysis and OH-oxidation of α-pinene

The organic component is the most abundant fraction of atmospheric submicron particles, while the formation mechanisms of secondary organic aerosol (SOA) are not fully understood. The effects of sulfate seed aerosols on SOA formation were investigated with a series of experiments carried out using a 9 m³ smog chamber. The presence of FeSO₄ or Fe₂(SO₄)₃ seed aerosols decreased SOA yields and increased oxidation levels in both ozonolysis and OH-oxidation of α-pinene compared to that in the presence of ZnSO₄ or (NH₄)₂SO₄. These findings were explained by metal-mediated aerosol-phase oxidation of organics: reactive radicals were generated on FeSO₄ or Fe₂(SO₄)₃ seed aerosols and reacted further with the organic mass. This effect would help to explain the high O/C ratios of organics in ambient particles that thus far cannot be reproduced in laboratory and model studies. In addition, the gap in the SOA yields between experiments with different seed aerosols was more significant in OH-oxidation experiments compared to ozonolysis experiments, while the gap in estimated O/C ratios was less obvious. This may have resulted from the different chemical compositions and oxidation levels of the SOA generated in the two systems, which affect the branching ratio of functionalization and fragmentation during aerosol oxidation.

High field FT-ICR mass spectrometry for molecular characterization of snow board from Moscow regions

High field Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry analysis of eight snow samples from Moscow city allowed us to identify more than 2000 various elemental compositions corresponding to regional air pollutants. The hierarchical cluster analysis (HCA) of the data showed good concordance of three main groups of samples with the main wind directions. The North-West group (A1) is represented by several homologous CHOS series of aliphatic organic aerosols. They may form as a result of enhanced photochemical reactions including oxidation of hydrocarbons with sulfonations due to higher amount of SO2 emissions in the atmosphere in this region. Group A2, corresponding to the South-East part of Moscow, contains large amount of oxidized hydrocarbons of different sources that may form during oxidation in atmosphere. These hydrocarbons appear correlated to emissions from traffic, neighboring oil refinery, and power plants. Another family of compounds specific for this region involves CHNO substances formed during oxidation processes including NOx and NO3 radical since emissions of NOx are higher in this part of the city. Group A3 is rich in CHO type of compounds with high H/C and low O/C ratios, which is characteristic of oxidized hydrocarbon-like organic aerosol. CHNO types of compounds in A3 group are probably nitro derivatives of condensed hydrocarbons such as PAH. This non-targeted profiling revealed site specific distribution of pollutants and gives a chance to develop new strategies in air quality control and further studies of Moscow environment.

Ion-induced nucleation of pure biogenic particles

Atmospheric aerosols and their effect on clouds are thought to be important for anthropogenic radiative forcing of the climate, yet remain poorly understood. Globally, around half of cloud condensation nuclei originate from nucleation of atmospheric vapours. It is thought that sulfuric acid is essential to initiate most particle formation in the atmosphere, and that ions have a relatively minor role. Some laboratory studies, however, have reported organic particle formation without the intentional addition of sulfuric acid, although contamination could not be excluded. Here we present evidence for the formation of aerosol particles from highly oxidized biogenic vapours in the absence of sulfuric acid in a large chamber under atmospheric conditions. The highly oxygenated molecules (HOMs) are produced by ozonolysis of α-pinene. We find that ions from Galactic cosmic rays increase the nucleation rate by one to two orders of magnitude compared with neutral nucleation. Our experimental findings are supported by quantum chemical calculations of the cluster binding energies of representative HOMs. Ion-induced nucleation of pure organic particles constitutes a potentially widespread source of aerosol particles in terrestrial environments with low sulfuric acid pollution.

Insights into the Formation and Evolution of Individual Compounds in the Particulate Phase during Aromatic Photo-Oxidation

Secondary organic aerosol (SOA) is well-known to have adverse effects on air quality and human health. However, the dynamic mechanisms occurring during SOA formation and evolution are poorly understood. The time-resolved SOA composition formed during the photo-oxidation of three aromatic compounds, methyl chavicol, toluene and 4-methyl catechol, were investigated at the European Photoreactor. SOA was collected using a particle into liquid sampler and analyzed offline using state-of-the-art mass spectrometry to produce temporal profiles of individual photo-oxidation products. In the photo-oxidation of methyl chavicol, 70 individual compounds were characterized and three distinctive temporal profile shapes were observed. The calculated mass fraction (Ci,aer/COA) of the individual SOA compounds showed either a linear trend (increasing/decreasing) or exponential decay with time. Substituted nitrophenols showed an exponential decay, with the nitro-group on the aromatic ring found to control the formation and loss of these species in the aerosol phase. Nitrophenols from both methyl chavicol and toluene photo-oxidation experiments showed a strong relationship with the NO2/NO (ppbv/ppbv) ratio and were observed during initial SOA growth. The location of the nitrophenol aromatic substitutions was found to be critically important, with the nitrophenol in the photo-oxidation of 4-methyl catechol not partitioning into the aerosol phase until irradiation had stopped; highlighting the importance of studying SOA formation and evolution at a molecular level.

Heating-Induced Evaporation of Nine Different Secondary Organic Aerosol Types

The volatility of the compounds comprising organic aerosol (OA) determines their distribution between the gas and particle phases. However, there is a disconnect between volatility distributions as typically derived from secondary OA (SOA) growth experiments and the effective particle volatility as probed in evaporation experiments. Specifically, the evaporation experiments indicate an overall much less volatile SOA. This raises questions regarding the use of traditional volatility distributions in the simulation and prediction of atmospheric SOA concentrations. Here, we present results from measurements of thermally induced evaporation of SOA for nine different SOA types (i.e., distinct volatile organic compound and oxidant pairs) encompassing both anthropogenic and biogenic compounds and O3 and OH to examine the extent to which the low effective volatility of SOA is a general phenomenon or specific to a subset of SOA types. The observed extents of evaporation with temperature were similar for all the SOA types and indicative of a low effective volatility. Furthermore, minimal variations in the composition of all the SOA types upon heating-induced evaporation were observed. These results suggest that oligomer decomposition likely plays a major role in controlling SOA evaporation, and since the SOA formation time scale in these measurements was less than a minute, the oligomer-forming reactions must be similarly rapid. Overall, these results emphasize the importance of accounting for the role of condensed phase reactions in altering the composition of SOA when assessing particle volatility.

The formation of highly oxidized multifunctional products in the ozonolysis of cyclohexene

The prompt formation of highly oxidized organic compounds in the ozonolysis of cyclohexene (C6H10) was investigated by means of laboratory experiments together with quantum chemical calculations. The experiments were performed in borosilicate glass flow tube reactors coupled to a chemical ionization atmospheric pressure interface time-of-flight mass spectrometer with a nitrate ion (NO3(-))-based ionization scheme. Quantum chemical calculations were performed at the CCSD(T)-F12a/VDZ-F12//ωB97XD/aug-cc-pVTZ level, with kinetic modeling using multiconformer transition state theory, including Eckart tunneling corrections. The complementary investigation methods gave a consistent picture of a formation mechanism advancing by peroxy radical (RO2) isomerization through intramolecular hydrogen shift reactions, followed by sequential O2 addition steps, that is, RO2 autoxidation, on a time scale of seconds. Dimerization of the peroxy radicals by recombination and cross-combination reactions is in competition with the formation of highly oxidized monomer species and is observed to lead to peroxides, potentially diacyl peroxides. The molar yield of these highly oxidized products (having O/C > 1 in monomers and O/C > 0.55 in dimers) from cyclohexene ozonolysis was determined as (4.5 ± 3.8)%. Fully deuterated cyclohexene and cis-6-nonenal ozonolysis, as well as the influence of water addition to the system (either H2O or D2O), were also investigated in order to strengthen the arguments on the proposed mechanism. Deuterated cyclohexene ozonolysis resulted in a less oxidized product distribution with a lower yield of highly oxygenated products and cis-6-nonenal ozonolysis generated the same monomer product distribution, consistent with the proposed mechanism and in agreement with quantum chemical modeling.

Parameterization of thermal properties of aging secondary organic aerosol produced by photo-oxidation of selected terpene mixtures

Formation and evolution of secondary organic aerosols (SOA) from biogenic VOCs influences the Earth's radiative balance. We have examined the photo-oxidation and aging of boreal terpene mixtures in the SAPHIR simulation chamber. Changes in thermal properties and chemical composition, deduced from mass spectrometric measurements, were providing information on the aging of biogenic SOA produced under ambient solar conditions. Effects of precursor mixture, concentration, and photochemical oxidation levels (OH exposure) were evaluated. OH exposure was found to be the major driver in the long term photochemical transformations, i.e., reaction times of several hours up to days, of SOA and its thermal properties, whereas the initial concentrations and terpenoid mixtures had only minor influence. The volatility distributions were parametrized using a sigmoidal function to determine TVFR0.5 (the temperature yielding a 50% particle volume fraction remaining) and the steepness of the volatility distribution. TVFR0.5 increased by 0.3±0.1% (ca. 1 K), while the steepness increased by 0.9±0.3% per hour of 1×10(6) cm(-3) OH exposure. Thus, aging reduces volatility and increases homogeneity of the vapor pressure distribution, presumably because highly volatile fractions become increasingly susceptible to gas phase oxidation, while less volatile fractions are less reactive with gas phase OH.

Measurement of humic-like substances in aerosols: a review

Aerosol-phase humic-like substances (HULIS) have received increasingly attention due to their universal ambient presence, active participation in atmospheric chemistry and important environmental and health effects. In last decade, intensive field works have promoted development of quantification and analysis method, unearthed spatio-temporal variation, and proved evidence for source identification of HULIS. These important developments were summarized in this review to provide a global perspective of HULIS. The diverse operational HULIS definitions were gradually focused onto several versions. Although found globally in Europe, Asia, Australasia and North America, HULIS are far more typical in continental and near-ground aerosols. HULIS concentrations varied from <1 μg/m(3) to >13 μg/m(3), with their carbon fraction making up 9%-72% of water soluble organic carbon. Dominant HULIS source was suggested as secondary processes and biomass burning, with the detailed formation pathways suggested and verified in laboratory works.

Ozone-driven secondary organic aerosol production chain

Acidic sulfate particles are known to enhance secondary organic aerosol (SOA) mass in the oxidation of biogenic volatile organic compounds (BVOCs) through accretion reactions and organosulfate formation. Enhanced phase transfer of epoxides, which form during the BVOC oxidation, into the acidified sulfate particles is shown to explain the latter process. We report here a newly identified ozone-driven SOA production chain that increases SOA formation dramatically. In this process, the epoxides interact with acidic sulfate particles, forming a new generation of highly reactive VOCs through isomerization. These VOCs partition back into the gas phase and undergo a new round of SOA forming oxidation reactions. Depending on the nature of the isomerized VOCs, their next generation oxidation forms highly oxygenated terpenoic acids or organosulfates. Atmospheric evidence is presented for the existence of marker compounds originating from this chain. The identified process partly explains the enhanced SOA formation in the presence of acidic particles on a molecular basis and could be an important source of missing SOA precursor VOCs that are currently not included in atmospheric models.

Thermodynamics of oligomer formation: implications for secondary organic aerosol formation and reactivity

Dimers and higher order oligomers, whether in the gas or particle phase, can affect important atmospheric processes such as new particle formation, and gas-particle partitioning. In this study, the thermodynamics of dimer formation from various oxidation products of α-pinene ozonolysis are investigated using a combination of Monte Carlo configuration sampling, semi-empirical and density functional theory (DFT) quantum mechanics, and continuum solvent modeling. Favorable dimer formation pathways are found to exist in both gas and condensed phases. The free energies of dimer formation are used to calculate equilibrium constants and expected dimer concentrations under a variety of conditions. In the gas phase, favorable pathways studied include formation of non-covalent dimers of terpenylic acid and/or cis-pinic acid and a covalently-bound peroxyhemiacetal. Under atmospherically relevant conditions, only terpenylic acid forms a dimer in sufficient quantities to contribute to new particle formation. Under conditions typically used in laboratory experiments, several dimer formation pathways may contribute to particle formation. In the condensed phase, non-covalent dimers of terpenylic acid and/or cis-pinic acid and covalently-bound dimers representing a peroxyhemiacetal and a hydrated aldol are favorably formed. Dimer formation is both solution and temperature dependent. A water-like solution appears to promote dimer formation over methanol- or acetonitrile-like solutions. Heating from 298 K to 373 K causes extensive decomposition back to monomers. Dimers that are not favorably formed in either the gas or condensed phase include hemi-acetal, ester, anhydride, and the di(α-hydroxy) ether.

Analysis of α-acyloxyhydroperoxy aldehydes with electrospray ionization-tandem mass spectrometry (ESI-MS(n))

A series of α-acyloxyhydroperoxy aldehydes was analyzed with direct infusion electrospray ionization tandem mass spectrometry (ESI/MS(n)) as well as liquid chromatography coupled with the mass spectrometry (LC/MS). Standards of α-acyloxyhydroperoxy aldehydes were prepared by liquid-phase ozonolysis of cyclohexene in the presence of carboxylic acids. Stabilized Criegee intermediate (SCI), a by-product of the ozone attack on the cyclohexene double bond, reacted with the selected carboxylic acids (SCI scavengers) leading to the formation of α-acyloxyhydroperoxy aldehydes. Ionization conditions were optimized. [M + H](+) ions were not formed in ESI; consequently, α-acyloxyhydroperoxy aldehydes were identified as their ammonia adducts for the first time. On the other hand, atmospheric-pressure chemical ionization has led to decomposition of the compounds of interest. Analysis of the mass spectra (MS(2) and MS(3)) of the [M + NH(4)](+) ions allowed recognizing the fragmentation pathways, common for all of the compounds under study. In order to get detailed insights into the fragmentation mechanism, a number of isotopically labeled analogs were also studied. To confirm that the fragmentation mechanism allows predicting the mass spectrum of different α-acyloxyhydroperoxy aldehydes, ozonolysis of α-pinene, a very important secondary organic aerosol precursor, was carried out. Spectra of the two ammonium cationized α-acyloxyhydroperoxy aldehydes prepared with α-pinene, cis-pinonic acid as well as pinic acid were predicted very accurately. Possible applications of the method developed for the analysis of α-acyloxyhydroperoxy aldehydes in SOA samples, as well as other compounds containing hydroperoxide moiety are discussed.

Aging of secondary organic aerosol from alpha-pinene ozonolysis: roles of hydroxyl and nitrate radicals

This work investigates the oxidative aging of preformed secondary organic aerosol (SOA) derived from alpha-pinene ozonolysis (-100 ppb(v) hydrocarbon [HC(x)] with excess of O3) within the University of California-Riverside Center for Environmental Research and Technology environmental chamber that occurs after introduction of additional hydroxyl (OH) and nitrate (NO3) radicals. Simultaneous measurements of SOA volume concentration, hygroscopicity, particle density, and elemental chemical composition (C:O:H) reveal increased particle wall-loss-corrected SOA formation (1.5%, 7.5%, and 15.1%), increase in oxygen-to-carbon ratio (O/C; 15.6%, 8.7%, and 8.7%), and hydrophilicity (4.2%, 7.4%, and 1.4%) after addition of NO (ultraviolet [UV] on), H2O2 (UV(on)), and N2O5 (dark), respectively. The processing observed as an increase in O/C and hydrophilicity is attributed to OH and NO3 reactions with first-generation vapor products and UV photolysis. The rate of increase in O/C appears to be only sufficient to achieve semivolatile oxygenated organic aerosol (SV-OOA) on a day time scale even at the raised chamber radical concentrations. The additional processing with UV irradiation without addition of NO, H2O2, or N2O5 is observed, adding 5.5% wall-loss-corrected volume. The photolysis-only processing is attributed to additional OH generated from photolysis of the nitrous acid (HONO) offgasing from chamber walls. This finding indicates that OH and NO3 radicals can further alter the chemical composition of SOA from alpha-pinene ozonolysis, which is proved to consist of first-generation products.

IMPLICATIONS

Secondary organic aerosol (SOA) may undergo aging processes once formed in the atmosphere, thereby altering the physicochemical and toxic properties of aerosol. This study discusses SOA aging of a major biogenic volatile organic compound (VOC; alpha-pinene) after it initially forms SOA. Aging of the alpha-pinene ozonolysis system by OH (through NO or H2O2 injection), NO3 (through N2O5 injection), and photolysis is observed. Although the reaction rate appears to be only sufficient to achieve semivolatile oxygenated organic aerosol (SV-OOA) level of oxygenation on a 1-day scale, it is important that SOA aging be considered in ambient air quality models. Aging in this study is attributed to further oxidation of gas-phase oxidation products of alpha-pinene ozonolysis.

Oligomer formation pathways in secondary organic aerosol from MS and MS/MS measurements with high mass accuracy and resolving power

Secondary organic aerosol (SOA) is formed when organic molecules react with oxidants in the gas phase to form particulate matter. Recent measurements have shown that more than half of the mass of laboratory-generated SOA consists of high molecular weight oligomeric compounds. In this work, the formation mechanisms of oligomers produced in the laboratory by ozonolysis of α-pinene, an important SOA precursor in ambient air, are studied by MS and MS/MS measurements with high accuracy and resolving power to characterize monomer building blocks and the reactions that couple them together. The distribution of oligomers in an SOA sample is complex, typically yielding over 1000 elemental formulas that can be assigned from an electrospray ionization mass spectrum. Despite this complexity, MS/MS spectra can be found that give strong evidence for specific oligomer formation pathways that have been postulated but not confirmed. These include aldol and gem-diol reactions of carbonyls as well as peroxyhemiacetal formation from hydroperoxides. The strongest evidence for carbonyl reactions is in the formation of hydrated products. Less compelling evidence is found for dehydrated products and secondary ozonide formation. The number of times that a monomer building block is observed as a fragmentation product in the MS/MS spectra is shown to be independent of the monomer vapor pressure, suggesting that oligomer formation is not driven by equilibrium partitioning of a monomer between the gas and particle phases, but rather by reactive uptake where a monomer collides with the particle surface and rapidly forms an oligomer.

Use of denuder/filter apparatus to investigate terpene ozonolysis

A denuder/filter apparatus was used to collect the gaseous and particulate reaction products from ozonlysis of α-pinene, limonene and α-terpineol in an effort to develop sampling techniques for characterizing indoor environment chemistry. Carboxylic acids found in the particulate phase were derivatized to 2,2,2-trifuoroethylamides by reaction with 3-ethyl-1-[3-(dimethylamino)propyl]carbodiimide hydrochloride (EDC) and 2,2,2-trifluoroethylamine hydrochloride (TFEA). Carbonyl compounds collected in both gas phase and particulate phase were derivatized to their respective oximes by reaction with O-(2,3,4,5,6-pentafluoro-benzyl)hydroxylamine hydrochloride (PFBHA). The ozonolysis of α-pinene yielded the carboxylic acids: cis-pinonic acid and pinic acid and the proposed carboxylic acids methanetricarboxylic acid and terpenylic acid; the carbonyls: 4-oxopentanal, norpinonaldehyde, pinon aldehyde and the proposed carbonyl methylidenepropanedial. The ozonolysis of limonene yielded the carboxylic acids: limonic acid and pinic acid and the carbonyls: 1-(4-methylcyclohex-3-en-1-yl)ethanone (4AMCH), glyoxal, methyl glyoxal, 4-oxopentanal and 6-oxo-3-(prop-1-en-2-yl)heptanal (IPOH). The ozonolysis of α-terpineol yielded the proposed carboxylic acids: terpenylic acid and homoterpenylic acid and the carbonyls: (5E)-6-hydroxyhept-5-en-2-one, methyl glyoxal and 4-oxopentanal.

Ozone-initiated particle formation, particle aging, and precursors in a laser printer

An increasing number of researchers have hypothesized that ozone may be involved in the particle formation processes that occur during printing, however no studies have investigated this further. In the current study, this hypothesis was tested in a chamber study by adding supplemental ozone to the chamber after a print job without measurable ozone emissions. Subsequent particle number concentration and size distribution measurements showed that new particles were formed minutes after the addition of ozone. The results demonstrated that ozone did react with printer-generated volatile organic compounds (VOCs) to form secondary organic aerosols (SOAs). The hypothesis was further confirmed by the observation of correlations among VOCs, ozone, and particles concentrations during a print job with measurable ozone emissions. The potential particle precursors were identified by a number of furnace tests, which suggested that squalene and styrene were the most likely SOA precursors with respect to ozone. Overall, this study significantly improved scientific understanding of the formation mechanisms of printer-generated particles, and highlighted the possible SOA formation potential of unsaturated nonterpene organic compounds by ozone-initiated reactions in the indoor environment.

Identifying organic aerosol sources by comparing functional group composition in chamber and atmospheric particles

Measurements of submicron particles by Fourier transform infrared spectroscopy in 14 campaigns in North America, Asia, South America, and Europe were used to identify characteristic organic functional group compositions of fuel combustion, terrestrial vegetation, and ocean bubble bursting sources, each of which often accounts for more than a third of organic mass (OM), and some of which is secondary organic aerosol (SOA) from gas-phase precursors. The majority of the OM consists of alkane, carboxylic acid, hydroxyl, and carbonyl groups. The organic functional groups formed from combustion and vegetation emissions are similar to the secondary products identified in chamber studies. The near absence of carbonyl groups in the observed SOA associated with combustion is consistent with alkane rather than aromatic precursors, and the absence of organonitrate groups can be explained by their hydrolysis in humid ambient conditions. The remote forest observations have ratios of carboxylic acid, organic hydroxyl, and nonacid carbonyl groups similar to those observed for isoprene and monoterpene chamber studies, but in biogenic aerosols transported downwind of urban areas the formation of esters replaces the acid and hydroxyl groups and leaves only nonacid carbonyl groups. The carbonyl groups in SOA associated with vegetation emissions provides striking evidence for the mechanism of esterification as the pathway for possible oligomerization reactions in the atmosphere. Forest fires include biogenic emissions that produce SOA with organic components similar to isoprene and monoterpene chamber studies, also resulting in nonacid carbonyl groups in SOA.

Evaporation kinetics and phase of laboratory and ambient secondary organic aerosol

Field measurements of secondary organic aerosol (SOA) find significantly higher mass loads than predicted by models, sparking intense effort focused on finding additional SOA sources but leaving the fundamental assumptions used by models unchallenged. Current air-quality models use absorptive partitioning theory assuming SOA particles are liquid droplets, forming instantaneous reversible equilibrium with gas phase. Further, they ignore the effects of adsorption of spectator organic species during SOA formation on SOA properties and fate. Using accurate and highly sensitive experimental approach for studying evaporation kinetics of size-selected single SOA particles, we characterized room-temperature evaporation kinetics of laboratory-generated α-pinene SOA and ambient atmospheric SOA. We found that even when gas phase organics are removed, it takes ∼24 h for pure α-pinene SOA particles to evaporate 75% of their mass, which is in sharp contrast to the ∼10 min time scale predicted by current kinetic models. Adsorption of "spectator" organic vapors during SOA formation, and aging of these coated SOA particles, dramatically reduced the evaporation rate, and in some cases nearly stopped it. Ambient SOA was found to exhibit evaporation behavior very similar to that of laboratory-generated coated and aged SOA. For all cases studied in this work, SOA evaporation behavior is nearly size-independent and does not follow the evaporation kinetics of liquid droplets, in sharp contrast with model assumptions. The findings about SOA phase, evaporation rates, and the importance of spectator gases and aging all indicate that there is need to reformulate the way SOA formation and evaporation are treated by models.

Pressure dependent mechanistic branching in the formation pathways of secondary organic aerosol from cyclic-alkene gas-phase ozonolysis

Pressure shows a strong influence on aerosol yields from the gas phase ozonolysis of terpenes and other cyclic alkenes.